drivers/usb/serial/f81232.c

   1 /*
   2  * Fintek F81232 USB to serial adaptor driver
   3  *
   4  * Copyright (C) 2012 Greg Kroah-Hartman (gregkh@linuxfoundation.org)
   5  * Copyright (C) 2012 Linux Foundation
   6  *
   7  * This program is free software; you can redistribute it and/or modify it
   8  * under the terms of the GNU General Public License version 2 as published by
   9  * the Free Software Foundation.
  10  *
  11  */
  12
  13 #include <linux/kernel.h>
  14 #include <linux/errno.h>
  15 #include <linux/init.h>
  16 #include <linux/slab.h>
  17 #include <linux/tty.h>
  18 #include <linux/tty_driver.h>
  19 #include <linux/tty_flip.h>
  20 #include <linux/serial.h>
  21 #include <linux/module.h>
  22 #include <linux/moduleparam.h>
  23 #include <linux/spinlock.h>
  24 #include <linux/uaccess.h>
  25 #include <linux/usb.h>
  26 #include <linux/usb/serial.h>
  27
  28 static const struct usb_device_id id_table[] = {
  29         { USB_DEVICE(0x1934, 0x0706) },
  30         { }                                     /* Terminating entry */
  31 };
  32 MODULE_DEVICE_TABLE(usb, id_table);
  33
  34 #define CONTROL_DTR                     0x01
  35 #define CONTROL_RTS                     0x02
  36
  37 #define UART_STATE                      0x08
  38 #define UART_STATE_TRANSIENT_MASK       0x74
  39 #define UART_DCD                        0x01
  40 #define UART_DSR                        0x02
  41 #define UART_BREAK_ERROR                0x04
  42 #define UART_RING                       0x08
  43 #define UART_FRAME_ERROR                0x10
  44 #define UART_PARITY_ERROR               0x20
  45 #define UART_OVERRUN_ERROR              0x40
  46 #define UART_CTS                        0x80
  47
  48 struct f81232_private {
  49         spinlock_t lock;
  50         u8 line_control;
  51         u8 line_status;
  52 };
  53
  54 static void f81232_update_line_status(struct usb_serial_port *port,
  55                                       unsigned char *data,
  56                                       unsigned int actual_length)
  57 {
  58 }
  59
  60 static void f81232_read_int_callback(struct urb *urb)
  61 {
  62         struct usb_serial_port *port =  urb->context;
  63         unsigned char *data = urb->transfer_buffer;
  64         unsigned int actual_length = urb->actual_length;
  65         int status = urb->status;
  66         int retval;
  67
  68         switch (status) {
  69         case 0:
  70                 /* success */
  71                 break;
  72         case -ECONNRESET:
  73         case -ENOENT:
  74         case -ESHUTDOWN:
  75                 /* this urb is terminated, clean up */
  76                 dev_dbg(&port->dev, "%s - urb shutting down with status: %d\n",
  77                         __func__, status);
  78                 return;
  79         default:
  80                 dev_dbg(&port->dev, "%s - nonzero urb status received: %d\n",
  81                         __func__, status);
  82                 goto exit;
  83         }
  84
  85         usb_serial_debug_data(&port->dev, __func__,
  86                               urb->actual_length, urb->transfer_buffer);
  87
  88         f81232_update_line_status(port, data, actual_length);
  89
  90 exit:
  91         retval = usb_submit_urb(urb, GFP_ATOMIC);
  92         if (retval)
  93                 dev_err(&urb->dev->dev,
  94                         "%s - usb_submit_urb failed with result %d\n",
  95                         __func__, retval);
  96 }
  97
  98 static void f81232_process_read_urb(struct urb *urb)
  99 {
 100         struct usb_serial_port *port = urb->context;
 101         struct f81232_private *priv = usb_get_serial_port_data(port);
 102         unsigned char *data = urb->transfer_buffer;
 103         char tty_flag = TTY_NORMAL;
 104         unsigned long flags;
 105         u8 line_status;
 106         int i;
 107
 108         /* update line status */
 109         spin_lock_irqsave(&priv->lock, flags);
 110         line_status = priv->line_status;
 111         priv->line_status &= ~UART_STATE_TRANSIENT_MASK;
 112         spin_unlock_irqrestore(&priv->lock, flags);
 113         wake_up_interruptible(&port->delta_msr_wait);
 114
 115         if (!urb->actual_length)
 116                 return;
 117
 118         /* break takes precedence over parity, */
 119         /* which takes precedence over framing errors */
 120         if (line_status & UART_BREAK_ERROR)
 121                 tty_flag = TTY_BREAK;
 122         else if (line_status & UART_PARITY_ERROR)
 123                 tty_flag = TTY_PARITY;
 124         else if (line_status & UART_FRAME_ERROR)
 125                 tty_flag = TTY_FRAME;
 126         dev_dbg(&port->dev, "%s - tty_flag = %d\n", __func__, tty_flag);
 127
 128         /* overrun is special, not associated with a char */
 129         if (line_status & UART_OVERRUN_ERROR)
 130                 tty_insert_flip_char(&port->port, 0, TTY_OVERRUN);
 131
 132         if (port->port.console && port->sysrq) {
 133                 for (i = 0; i < urb->actual_length; ++i)
 134                         if (!usb_serial_handle_sysrq_char(port, data[i]))
 135                                 tty_insert_flip_char(&port->port, data[i],
 136                                                 tty_flag);
 137         } else {
 138                 tty_insert_flip_string_fixed_flag(&port->port, data, tty_flag,
 139                                                         urb->actual_length);
 140         }
 141
 142         tty_flip_buffer_push(&port->port);
 143 }
 144
 145 static int set_control_lines(struct usb_device *dev, u8 value)
 146 {
 147         /* FIXME - Stubbed out for now */
 148         return 0;
 149 }
 150
 151 static void f81232_break_ctl(struct tty_struct *tty, int break_state)
 152 {
 153         /* FIXME - Stubbed out for now */
 154
 155         /*
 156          * break_state = -1 to turn on break, and 0 to turn off break
 157          * see drivers/char/tty_io.c to see it used.
 158          * last_set_data_urb_value NEVER has the break bit set in it.
 159          */
 160 }
 161
 162 static void f81232_set_termios(struct tty_struct *tty,
 163                 struct usb_serial_port *port, struct ktermios *old_termios)
 164 {
 165         /* FIXME - Stubbed out for now */
 166
 167         /* Don't change anything if nothing has changed */
 168         if (!tty_termios_hw_change(&tty->termios, old_termios))
 169                 return;
 170
 171         /* Do the real work here... */
 172         tty_termios_copy_hw(&tty->termios, old_termios);
 173 }
 174
 175 static int f81232_tiocmget(struct tty_struct *tty)
 176 {
 177         /* FIXME - Stubbed out for now */
 178         return 0;
 179 }
 180
 181 static int f81232_tiocmset(struct tty_struct *tty,
 182                         unsigned int set, unsigned int clear)
 183 {
 184         /* FIXME - Stubbed out for now */
 185         return 0;
 186 }
 187
 188 static int f81232_open(struct tty_struct *tty, struct usb_serial_port *port)
 189 {
 190         struct ktermios tmp_termios;
 191         int result;
 192
 193         /* Setup termios */
 194         if (tty)
 195                 f81232_set_termios(tty, port, &tmp_termios);
 196
 197         result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
 198         if (result) {
 199                 dev_err(&port->dev, "%s - failed submitting interrupt urb,"
 200                         " error %d\n", __func__, result);
 201                 return result;
 202         }
 203
 204         result = usb_serial_generic_open(tty, port);
 205         if (result) {
 206                 usb_kill_urb(port->interrupt_in_urb);
 207                 return result;
 208         }
 209
 210         port->port.drain_delay = 256;
 211         return 0;
 212 }
 213
 214 static void f81232_close(struct usb_serial_port *port)
 215 {
 216         usb_serial_generic_close(port);
 217         usb_kill_urb(port->interrupt_in_urb);
 218 }
 219
 220 static void f81232_dtr_rts(struct usb_serial_port *port, int on)
 221 {
 222         struct f81232_private *priv = usb_get_serial_port_data(port);
 223         unsigned long flags;
 224         u8 control;
 225
 226         spin_lock_irqsave(&priv->lock, flags);
 227         /* Change DTR and RTS */
 228         if (on)
 229                 priv->line_control |= (CONTROL_DTR | CONTROL_RTS);
 230         else
 231                 priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
 232         control = priv->line_control;
 233         spin_unlock_irqrestore(&priv->lock, flags);
 234         set_control_lines(port->serial->dev, control);
 235 }
 236
 237 static int f81232_carrier_raised(struct usb_serial_port *port)
 238 {
 239         struct f81232_private *priv = usb_get_serial_port_data(port);
 240         if (priv->line_status & UART_DCD)
 241                 return 1;
 242         return 0;
 243 }
 244
 245 static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
 246 {
 247         struct f81232_private *priv = usb_get_serial_port_data(port);
 248         unsigned long flags;
 249         unsigned int prevstatus;
 250         unsigned int status;
 251         unsigned int changed;
 252
 253         spin_lock_irqsave(&priv->lock, flags);
 254         prevstatus = priv->line_status;
 255         spin_unlock_irqrestore(&priv->lock, flags);
 256
 257         while (1) {
 258                 interruptible_sleep_on(&port->delta_msr_wait);
 259                 /* see if a signal did it */
 260                 if (signal_pending(current))
 261                         return -ERESTARTSYS;
 262
 263                 if (port->serial->disconnected)
 264                         return -EIO;
 265
 266                 spin_lock_irqsave(&priv->lock, flags);
 267                 status = priv->line_status;
 268                 spin_unlock_irqrestore(&priv->lock, flags);
 269
 270                 changed = prevstatus ^ status;
 271
 272                 if (((arg & TIOCM_RNG) && (changed & UART_RING)) ||
 273                     ((arg & TIOCM_DSR) && (changed & UART_DSR)) ||
 274                     ((arg & TIOCM_CD)  && (changed & UART_DCD)) ||
 275                     ((arg & TIOCM_CTS) && (changed & UART_CTS))) {
 276                         return 0;
 277                 }
 278                 prevstatus = status;
 279         }
 280         /* NOTREACHED */
 281         return 0;
 282 }
 283
 284 static int f81232_ioctl(struct tty_struct *tty,
 285                         unsigned int cmd, unsigned long arg)
 286 {
 287         struct serial_struct ser;
 288         struct usb_serial_port *port = tty->driver_data;
 289
 290         dev_dbg(&port->dev, "%s (%d) cmd = 0x%04x\n", __func__,
 291                 port->number, cmd);
 292
 293         switch (cmd) {
 294         case TIOCGSERIAL:
 295                 memset(&ser, 0, sizeof ser);
 296                 ser.type = PORT_16654;
 297                 ser.line = port->serial->minor;
 298                 ser.port = port->number;
 299                 ser.baud_base = 460800;
 300
 301                 if (copy_to_user((void __user *)arg, &ser, sizeof ser))
 302                         return -EFAULT;
 303
 304                 return 0;
 305
 306         case TIOCMIWAIT:
 307                 dev_dbg(&port->dev, "%s (%d) TIOCMIWAIT\n", __func__,
 308                         port->number);
 309                 return wait_modem_info(port, arg);
 310         default:
 311                 dev_dbg(&port->dev, "%s not supported = 0x%04x\n",
 312                         __func__, cmd);
 313                 break;
 314         }
 315         return -ENOIOCTLCMD;
 316 }
 317
 318 static int f81232_port_probe(struct usb_serial_port *port)
 319 {
 320         struct f81232_private *priv;
 321
 322         priv = kzalloc(sizeof(*priv), GFP_KERNEL);
 323         if (!priv)
 324                 return -ENOMEM;
 325
 326         spin_lock_init(&priv->lock);
 327
 328         usb_set_serial_port_data(port, priv);
 329
 330         return 0;
 331 }
 332
 333 static int f81232_port_remove(struct usb_serial_port *port)
 334 {
 335         struct f81232_private *priv;
 336
 337         priv = usb_get_serial_port_data(port);
 338         kfree(priv);
 339
 340         return 0;
 341 }
 342
 343 static struct usb_serial_driver f81232_device = {
 344         .driver = {
 345                 .owner =        THIS_MODULE,
 346                 .name =         "f81232",
 347         },
 348         .id_table =             id_table,
 349         .num_ports =            1,
 350         .bulk_in_size =         256,
 351         .bulk_out_size =        256,
 352         .open =                 f81232_open,
 353         .close =                f81232_close,
 354         .dtr_rts =              f81232_dtr_rts,
 355         .carrier_raised =       f81232_carrier_raised,
 356         .ioctl =                f81232_ioctl,
 357         .break_ctl =            f81232_break_ctl,
 358         .set_termios =          f81232_set_termios,
 359         .tiocmget =             f81232_tiocmget,
 360         .tiocmset =             f81232_tiocmset,
 361         .process_read_urb =     f81232_process_read_urb,
 362         .read_int_callback =    f81232_read_int_callback,
 363         .port_probe =           f81232_port_probe,
 364         .port_remove =          f81232_port_remove,
 365 };
 366
 367 static struct usb_serial_driver * const serial_drivers[] = {
 368         &f81232_device,
 369         NULL,
 370 };
 371
 372 module_usb_serial_driver(serial_drivers, id_table);
 373
 374 MODULE_DESCRIPTION("Fintek F81232 USB to serial adaptor driver");
 375 MODULE_AUTHOR("Greg Kroah-Hartman <gregkh@linuxfoundation.org");
 376 MODULE_LICENSE("GPL v2");