projects / deliverable / linux.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
Update broken web addresses in the kernel.
[deliverable/linux.git] / drivers / usb / serial / keyspan.c
1 /*
2 Keyspan USB to Serial Converter driver
3
4 (C) Copyright (C) 2000-2001 Hugh Blemings <hugh@blemings.org>
5 (C) Copyright (C) 2002 Greg Kroah-Hartman <greg@kroah.com>
6
7 This program is free software; you can redistribute it and/or modify
8 it under the terms of the GNU General Public License as published by
9 the Free Software Foundation; either version 2 of the License, or
10 (at your option) any later version.
11
12 See http://blemings.org/hugh/keyspan.html for more information.
13
14 Code in this driver inspired by and in a number of places taken
15 from Brian Warner's original Keyspan-PDA driver.
16
17 This driver has been put together with the support of Innosys, Inc.
18 and Keyspan, Inc the manufacturers of the Keyspan USB-serial products.
19 Thanks Guys :)
20
21 Thanks to Paulus for miscellaneous tidy ups, some largish chunks
22 of much nicer and/or completely new code and (perhaps most uniquely)
23 having the patience to sit down and explain why and where he'd changed
24 stuff.
25
26 Tip 'o the hat to IBM (and previously Linuxcare :) for supporting
27 staff in their work on open source projects.
28
29 Change History
30
31 2003sep04 LPM (Keyspan) add support for new single port product USA19HS.
32 Improve setup message handling for all devices.
33
34 Wed Feb 19 22:00:00 PST 2003 (Jeffrey S. Laing <keyspan@jsl.com>)
35 Merged the current (1/31/03) Keyspan code with the current (2.4.21-pre4)
36 Linux source tree. The Linux tree lacked support for the 49WLC and
37 others. The Keyspan patches didn't work with the current kernel.
38
39 2003jan30 LPM add support for the 49WLC and MPR
40
41 Wed Apr 25 12:00:00 PST 2002 (Keyspan)
42 Started with Hugh Blemings' code dated Jan 17, 2002. All adapters
43 now supported (including QI and QW). Modified port open, port
44 close, and send setup() logic to fix various data and endpoint
45 synchronization bugs and device LED status bugs. Changed keyspan_
46 write_room() to accurately return transmit buffer availability.
47 Changed forwardingLength from 1 to 16 for all adapters.
48
49 Fri Oct 12 16:45:00 EST 2001
50 Preliminary USA-19QI and USA-28 support (both test OK for me, YMMV)
51
52 Wed Apr 25 12:00:00 PST 2002 (Keyspan)
53 Started with Hugh Blemings' code dated Jan 17, 2002. All adapters
54 now supported (including QI and QW). Modified port open, port
55 close, and send setup() logic to fix various data and endpoint
56 synchronization bugs and device LED status bugs. Changed keyspan_
57 write_room() to accurately return transmit buffer availability.
58 Changed forwardingLength from 1 to 16 for all adapters.
59
60 Fri Oct 12 16:45:00 EST 2001
61 Preliminary USA-19QI and USA-28 support (both test OK for me, YMMV)
62
63 Mon Oct 8 14:29:00 EST 2001 hugh
64 Fixed bug that prevented mulitport devices operating correctly
65 if they weren't the first unit attached.
66
67 Sat Oct 6 12:31:21 EST 2001 hugh
68 Added support for USA-28XA and -28XB, misc cleanups, break support
69 for usa26 based models thanks to David Gibson.
70
71 Thu May 31 11:56:42 PDT 2001 gkh
72 switched from using spinlock to a semaphore
73
74 (04/08/2001) gb
75 Identify version on module load.
76
77 (11/01/2000) Adam J. Richter
78 usb_device_id table support.
79
80 Tue Oct 10 23:15:33 EST 2000 Hugh
81 Merged Paul's changes with my USA-49W mods. Work in progress
82 still...
83
84 Wed Jul 19 14:00:42 EST 2000 gkh
85 Added module_init and module_exit functions to handle the fact that
86 this driver is a loadable module now.
87
88 Tue Jul 18 16:14:52 EST 2000 Hugh
89 Basic character input/output for USA-19 now mostly works,
90 fixed at 9600 baud for the moment.
91
92 Sat Jul 8 11:11:48 EST 2000 Hugh
93 First public release - nothing works except the firmware upload.
94 Tested on PPC and x86 architectures, seems to behave...
95 */
96
97
98 #include <linux/kernel.h>
99 #include <linux/jiffies.h>
100 #include <linux/errno.h>
101 #include <linux/init.h>
102 #include <linux/slab.h>
103 #include <linux/tty.h>
104 #include <linux/tty_driver.h>
105 #include <linux/tty_flip.h>
106 #include <linux/module.h>
107 #include <linux/spinlock.h>
108 #include <linux/firmware.h>
109 #include <linux/ihex.h>
110 #include <linux/uaccess.h>
111 #include <linux/usb.h>
112 #include <linux/usb/serial.h>
113 #include "keyspan.h"
114
115 static int debug;
116
117 /*
118 * Version Information
119 */
120 #define DRIVER_VERSION "v1.1.5"
121 #define DRIVER_AUTHOR "Hugh Blemings <hugh@misc.nu"
122 #define DRIVER_DESC "Keyspan USB to Serial Converter Driver"
123
124 #define INSTAT_BUFLEN 32
125 #define GLOCONT_BUFLEN 64
126 #define INDAT49W_BUFLEN 512
127
128 /* Per device and per port private data */
129 struct keyspan_serial_private {
130 const struct keyspan_device_details *device_details;
131
132 struct urb *instat_urb;
133 char instat_buf[INSTAT_BUFLEN];
134
135 /* added to support 49wg, where data from all 4 ports comes in
136 on 1 EP and high-speed supported */
137 struct urb *indat_urb;
138 char indat_buf[INDAT49W_BUFLEN];
139
140 /* XXX this one probably will need a lock */
141 struct urb *glocont_urb;
142 char glocont_buf[GLOCONT_BUFLEN];
143 char ctrl_buf[8]; /* for EP0 control message */
144 };
145
146 struct keyspan_port_private {
147 /* Keep track of which input & output endpoints to use */
148 int in_flip;
149 int out_flip;
150
151 /* Keep duplicate of device details in each port
152 structure as well - simplifies some of the
153 callback functions etc. */
154 const struct keyspan_device_details *device_details;
155
156 /* Input endpoints and buffer for this port */
157 struct urb *in_urbs[2];
158 char in_buffer[2][64];
159 /* Output endpoints and buffer for this port */
160 struct urb *out_urbs[2];
161 char out_buffer[2][64];
162
163 /* Input ack endpoint */
164 struct urb *inack_urb;
165 char inack_buffer[1];
166
167 /* Output control endpoint */
168 struct urb *outcont_urb;
169 char outcont_buffer[64];
170
171 /* Settings for the port */
172 int baud;
173 int old_baud;
174 unsigned int cflag;
175 unsigned int old_cflag;
176 enum {flow_none, flow_cts, flow_xon} flow_control;
177 int rts_state; /* Handshaking pins (outputs) */
178 int dtr_state;
179 int cts_state; /* Handshaking pins (inputs) */
180 int dsr_state;
181 int dcd_state;
182 int ri_state;
183 int break_on;
184
185 unsigned long tx_start_time[2];
186 int resend_cont; /* need to resend control packet */
187 };
188
189 /* Include Keyspan message headers. All current Keyspan Adapters
190 make use of one of five message formats which are referred
191 to as USA-26, USA-28, USA-49, USA-90, USA-67 by Keyspan and
192 within this driver. */
193 #include "keyspan_usa26msg.h"
194 #include "keyspan_usa28msg.h"
195 #include "keyspan_usa49msg.h"
196 #include "keyspan_usa90msg.h"
197 #include "keyspan_usa67msg.h"
198
199
200 /* Functions used by new usb-serial code. */
201 static int __init keyspan_init(void)
202 {
203 int retval;
204 retval = usb_serial_register(&keyspan_pre_device);
205 if (retval)
206 goto failed_pre_device_register;
207 retval = usb_serial_register(&keyspan_1port_device);
208 if (retval)
209 goto failed_1port_device_register;
210 retval = usb_serial_register(&keyspan_2port_device);
211 if (retval)
212 goto failed_2port_device_register;
213 retval = usb_serial_register(&keyspan_4port_device);
214 if (retval)
215 goto failed_4port_device_register;
216 retval = usb_register(&keyspan_driver);
217 if (retval)
218 goto failed_usb_register;
219
220 printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
221 DRIVER_DESC "\n");
222
223 return 0;
224 failed_usb_register:
225 usb_serial_deregister(&keyspan_4port_device);
226 failed_4port_device_register:
227 usb_serial_deregister(&keyspan_2port_device);
228 failed_2port_device_register:
229 usb_serial_deregister(&keyspan_1port_device);
230 failed_1port_device_register:
231 usb_serial_deregister(&keyspan_pre_device);
232 failed_pre_device_register:
233 return retval;
234 }
235
236 static void __exit keyspan_exit(void)
237 {
238 usb_deregister(&keyspan_driver);
239 usb_serial_deregister(&keyspan_pre_device);
240 usb_serial_deregister(&keyspan_1port_device);
241 usb_serial_deregister(&keyspan_2port_device);
242 usb_serial_deregister(&keyspan_4port_device);
243 }
244
245 module_init(keyspan_init);
246 module_exit(keyspan_exit);
247
248 static void keyspan_break_ctl(struct tty_struct *tty, int break_state)
249 {
250 struct usb_serial_port *port = tty->driver_data;
251 struct keyspan_port_private *p_priv;
252
253 dbg("%s", __func__);
254
255 p_priv = usb_get_serial_port_data(port);
256
257 if (break_state == -1)
258 p_priv->break_on = 1;
259 else
260 p_priv->break_on = 0;
261
262 keyspan_send_setup(port, 0);
263 }
264
265
266 static void keyspan_set_termios(struct tty_struct *tty,
267 struct usb_serial_port *port, struct ktermios *old_termios)
268 {
269 int baud_rate, device_port;
270 struct keyspan_port_private *p_priv;
271 const struct keyspan_device_details *d_details;
272 unsigned int cflag;
273
274 dbg("%s", __func__);
275
276 p_priv = usb_get_serial_port_data(port);
277 d_details = p_priv->device_details;
278 cflag = tty->termios->c_cflag;
279 device_port = port->number - port->serial->minor;
280
281 /* Baud rate calculation takes baud rate as an integer
282 so other rates can be generated if desired. */
283 baud_rate = tty_get_baud_rate(tty);
284 /* If no match or invalid, don't change */
285 if (d_details->calculate_baud_rate(baud_rate, d_details->baudclk,
286 NULL, NULL, NULL, device_port) == KEYSPAN_BAUD_RATE_OK) {
287 /* FIXME - more to do here to ensure rate changes cleanly */
288 /* FIXME - calcuate exact rate from divisor ? */
289 p_priv->baud = baud_rate;
290 } else
291 baud_rate = tty_termios_baud_rate(old_termios);
292
293 tty_encode_baud_rate(tty, baud_rate, baud_rate);
294 /* set CTS/RTS handshake etc. */
295 p_priv->cflag = cflag;
296 p_priv->flow_control = (cflag & CRTSCTS)? flow_cts: flow_none;
297
298 /* Mark/Space not supported */
299 tty->termios->c_cflag &= ~CMSPAR;
300
301 keyspan_send_setup(port, 0);
302 }
303
304 static int keyspan_tiocmget(struct tty_struct *tty, struct file *file)
305 {
306 struct usb_serial_port *port = tty->driver_data;
307 struct keyspan_port_private *p_priv = usb_get_serial_port_data(port);
308 unsigned int value;
309
310 value = ((p_priv->rts_state) ? TIOCM_RTS : 0) |
311 ((p_priv->dtr_state) ? TIOCM_DTR : 0) |
312 ((p_priv->cts_state) ? TIOCM_CTS : 0) |
313 ((p_priv->dsr_state) ? TIOCM_DSR : 0) |
314 ((p_priv->dcd_state) ? TIOCM_CAR : 0) |
315 ((p_priv->ri_state) ? TIOCM_RNG : 0);
316
317 return value;
318 }
319
320 static int keyspan_tiocmset(struct tty_struct *tty, struct file *file,
321 unsigned int set, unsigned int clear)
322 {
323 struct usb_serial_port *port = tty->driver_data;
324 struct keyspan_port_private *p_priv = usb_get_serial_port_data(port);
325
326 if (set & TIOCM_RTS)
327 p_priv->rts_state = 1;
328 if (set & TIOCM_DTR)
329 p_priv->dtr_state = 1;
330 if (clear & TIOCM_RTS)
331 p_priv->rts_state = 0;
332 if (clear & TIOCM_DTR)
333 p_priv->dtr_state = 0;
334 keyspan_send_setup(port, 0);
335 return 0;
336 }
337
338 /* Write function is similar for the four protocols used
339 with only a minor change for usa90 (usa19hs) required */
340 static int keyspan_write(struct tty_struct *tty,
341 struct usb_serial_port *port, const unsigned char *buf, int count)
342 {
343 struct keyspan_port_private *p_priv;
344 const struct keyspan_device_details *d_details;
345 int flip;
346 int left, todo;
347 struct urb *this_urb;
348 int err, maxDataLen, dataOffset;
349
350 p_priv = usb_get_serial_port_data(port);
351 d_details = p_priv->device_details;
352
353 if (d_details->msg_format == msg_usa90) {
354 maxDataLen = 64;
355 dataOffset = 0;
356 } else {
357 maxDataLen = 63;
358 dataOffset = 1;
359 }
360
361 dbg("%s - for port %d (%d chars), flip=%d",
362 __func__, port->number, count, p_priv->out_flip);
363
364 for (left = count; left > 0; left -= todo) {
365 todo = left;
366 if (todo > maxDataLen)
367 todo = maxDataLen;
368
369 flip = p_priv->out_flip;
370
371 /* Check we have a valid urb/endpoint before we use it... */
372 this_urb = p_priv->out_urbs[flip];
373 if (this_urb == NULL) {
374 /* no bulk out, so return 0 bytes written */
375 dbg("%s - no output urb :(", __func__);
376 return count;
377 }
378
379 dbg("%s - endpoint %d flip %d",
380 __func__, usb_pipeendpoint(this_urb->pipe), flip);
381
382 if (this_urb->status == -EINPROGRESS) {
383 if (time_before(jiffies,
384 p_priv->tx_start_time[flip] + 10 * HZ))
385 break;
386 usb_unlink_urb(this_urb);
387 break;
388 }
389
390 /* First byte in buffer is "last flag" (except for usa19hx)
391 - unused so for now so set to zero */
392 ((char *)this_urb->transfer_buffer)[0] = 0;
393
394 memcpy(this_urb->transfer_buffer + dataOffset, buf, todo);
395 buf += todo;
396
397 /* send the data out the bulk port */
398 this_urb->transfer_buffer_length = todo + dataOffset;
399
400 this_urb->dev = port->serial->dev;
401 err = usb_submit_urb(this_urb, GFP_ATOMIC);
402 if (err != 0)
403 dbg("usb_submit_urb(write bulk) failed (%d)", err);
404 p_priv->tx_start_time[flip] = jiffies;
405
406 /* Flip for next time if usa26 or usa28 interface
407 (not used on usa49) */
408 p_priv->out_flip = (flip + 1) & d_details->outdat_endp_flip;
409 }
410
411 return count - left;
412 }
413
414 static void usa26_indat_callback(struct urb *urb)
415 {
416 int i, err;
417 int endpoint;
418 struct usb_serial_port *port;
419 struct tty_struct *tty;
420 unsigned char *data = urb->transfer_buffer;
421 int status = urb->status;
422
423 dbg("%s", __func__);
424
425 endpoint = usb_pipeendpoint(urb->pipe);
426
427 if (status) {
428 dbg("%s - nonzero status: %x on endpoint %d.",
429 __func__, status, endpoint);
430 return;
431 }
432
433 port = urb->context;
434 tty = tty_port_tty_get(&port->port);
435 if (tty && urb->actual_length) {
436 /* 0x80 bit is error flag */
437 if ((data[0] & 0x80) == 0) {
438 /* no errors on individual bytes, only
439 possible overrun err */
440 if (data[0] & RXERROR_OVERRUN)
441 err = TTY_OVERRUN;
442 else
443 err = 0;
444 for (i = 1; i < urb->actual_length ; ++i)
445 tty_insert_flip_char(tty, data[i], err);
446 } else {
447 /* some bytes had errors, every byte has status */
448 dbg("%s - RX error!!!!", __func__);
449 for (i = 0; i + 1 < urb->actual_length; i += 2) {
450 int stat = data[i], flag = 0;
451 if (stat & RXERROR_OVERRUN)
452 flag |= TTY_OVERRUN;
453 if (stat & RXERROR_FRAMING)
454 flag |= TTY_FRAME;
455 if (stat & RXERROR_PARITY)
456 flag |= TTY_PARITY;
457 /* XXX should handle break (0x10) */
458 tty_insert_flip_char(tty, data[i+1], flag);
459 }
460 }
461 tty_flip_buffer_push(tty);
462 }
463 tty_kref_put(tty);
464
465 /* Resubmit urb so we continue receiving */
466 urb->dev = port->serial->dev;
467 err = usb_submit_urb(urb, GFP_ATOMIC);
468 if (err != 0)
469 dbg("%s - resubmit read urb failed. (%d)", __func__, err);
470 }
471
472 /* Outdat handling is common for all devices */
473 static void usa2x_outdat_callback(struct urb *urb)
474 {
475 struct usb_serial_port *port;
476 struct keyspan_port_private *p_priv;
477
478 port = urb->context;
479 p_priv = usb_get_serial_port_data(port);
480 dbg("%s - urb %d", __func__, urb == p_priv->out_urbs[1]);
481
482 usb_serial_port_softint(port);
483 }
484
485 static void usa26_inack_callback(struct urb *urb)
486 {
487 dbg("%s", __func__);
488
489 }
490
491 static void usa26_outcont_callback(struct urb *urb)
492 {
493 struct usb_serial_port *port;
494 struct keyspan_port_private *p_priv;
495
496 port = urb->context;
497 p_priv = usb_get_serial_port_data(port);
498
499 if (p_priv->resend_cont) {
500 dbg("%s - sending setup", __func__);
501 keyspan_usa26_send_setup(port->serial, port,
502 p_priv->resend_cont - 1);
503 }
504 }
505
506 static void usa26_instat_callback(struct urb *urb)
507 {
508 unsigned char *data = urb->transfer_buffer;
509 struct keyspan_usa26_portStatusMessage *msg;
510 struct usb_serial *serial;
511 struct usb_serial_port *port;
512 struct keyspan_port_private *p_priv;
513 struct tty_struct *tty;
514 int old_dcd_state, err;
515 int status = urb->status;
516
517 serial = urb->context;
518
519 if (status) {
520 dbg("%s - nonzero status: %x", __func__, status);
521 return;
522 }
523 if (urb->actual_length != 9) {
524 dbg("%s - %d byte report??", __func__, urb->actual_length);
525 goto exit;
526 }
527
528 msg = (struct keyspan_usa26_portStatusMessage *)data;
529
530 #if 0
531 dbg("%s - port status: port %d cts %d dcd %d dsr %d ri %d toff %d txoff %d rxen %d cr %d",
532 __func__, msg->port, msg->hskia_cts, msg->gpia_dcd, msg->dsr, msg->ri, msg->_txOff,
533 msg->_txXoff, msg->rxEnabled, msg->controlResponse);
534 #endif
535
536 /* Now do something useful with the data */
537
538
539 /* Check port number from message and retrieve private data */
540 if (msg->port >= serial->num_ports) {
541 dbg("%s - Unexpected port number %d", __func__, msg->port);
542 goto exit;
543 }
544 port = serial->port[msg->port];
545 p_priv = usb_get_serial_port_data(port);
546
547 /* Update handshaking pin state information */
548 old_dcd_state = p_priv->dcd_state;
549 p_priv->cts_state = ((msg->hskia_cts) ? 1 : 0);
550 p_priv->dsr_state = ((msg->dsr) ? 1 : 0);
551 p_priv->dcd_state = ((msg->gpia_dcd) ? 1 : 0);
552 p_priv->ri_state = ((msg->ri) ? 1 : 0);
553
554 if (old_dcd_state != p_priv->dcd_state) {
555 tty = tty_port_tty_get(&port->port);
556 if (tty && !C_CLOCAL(tty))
557 tty_hangup(tty);
558 tty_kref_put(tty);
559 }
560
561 /* Resubmit urb so we continue receiving */
562 urb->dev = serial->dev;
563 err = usb_submit_urb(urb, GFP_ATOMIC);
564 if (err != 0)
565 dbg("%s - resubmit read urb failed. (%d)", __func__, err);
566 exit: ;
567 }
568
569 static void usa26_glocont_callback(struct urb *urb)
570 {
571 dbg("%s", __func__);
572 }
573
574
575 static void usa28_indat_callback(struct urb *urb)
576 {
577 int err;
578 struct usb_serial_port *port;
579 struct tty_struct *tty;
580 unsigned char *data;
581 struct keyspan_port_private *p_priv;
582 int status = urb->status;
583
584 dbg("%s", __func__);
585
586 port = urb->context;
587 p_priv = usb_get_serial_port_data(port);
588 data = urb->transfer_buffer;
589
590 if (urb != p_priv->in_urbs[p_priv->in_flip])
591 return;
592
593 do {
594 if (status) {
595 dbg("%s - nonzero status: %x on endpoint %d.",
596 __func__, status, usb_pipeendpoint(urb->pipe));
597 return;
598 }
599
600 port = urb->context;
601 p_priv = usb_get_serial_port_data(port);
602 data = urb->transfer_buffer;
603
604 tty =tty_port_tty_get(&port->port);
605 if (tty && urb->actual_length) {
606 tty_insert_flip_string(tty, data, urb->actual_length);
607 tty_flip_buffer_push(tty);
608 }
609 tty_kref_put(tty);
610
611 /* Resubmit urb so we continue receiving */
612 urb->dev = port->serial->dev;
613 err = usb_submit_urb(urb, GFP_ATOMIC);
614 if (err != 0)
615 dbg("%s - resubmit read urb failed. (%d)",
616 __func__, err);
617 p_priv->in_flip ^= 1;
618
619 urb = p_priv->in_urbs[p_priv->in_flip];
620 } while (urb->status != -EINPROGRESS);
621 }
622
623 static void usa28_inack_callback(struct urb *urb)
624 {
625 dbg("%s", __func__);
626 }
627
628 static void usa28_outcont_callback(struct urb *urb)
629 {
630 struct usb_serial_port *port;
631 struct keyspan_port_private *p_priv;
632
633 port = urb->context;
634 p_priv = usb_get_serial_port_data(port);
635
636 if (p_priv->resend_cont) {
637 dbg("%s - sending setup", __func__);
638 keyspan_usa28_send_setup(port->serial, port,
639 p_priv->resend_cont - 1);
640 }
641 }
642
643 static void usa28_instat_callback(struct urb *urb)
644 {
645 int err;
646 unsigned char *data = urb->transfer_buffer;
647 struct keyspan_usa28_portStatusMessage *msg;
648 struct usb_serial *serial;
649 struct usb_serial_port *port;
650 struct keyspan_port_private *p_priv;
651 struct tty_struct *tty;
652 int old_dcd_state;
653 int status = urb->status;
654
655 serial = urb->context;
656
657 if (status) {
658 dbg("%s - nonzero status: %x", __func__, status);
659 return;
660 }
661
662 if (urb->actual_length != sizeof(struct keyspan_usa28_portStatusMessage)) {
663 dbg("%s - bad length %d", __func__, urb->actual_length);
664 goto exit;
665 }
666
667 /*dbg("%s %x %x %x %x %x %x %x %x %x %x %x %x", __func__
668 data[0], data[1], data[2], data[3], data[4], data[5],
669 data[6], data[7], data[8], data[9], data[10], data[11]);*/
670
671 /* Now do something useful with the data */
672 msg = (struct keyspan_usa28_portStatusMessage *)data;
673
674 /* Check port number from message and retrieve private data */
675 if (msg->port >= serial->num_ports) {
676 dbg("%s - Unexpected port number %d", __func__, msg->port);
677 goto exit;
678 }
679 port = serial->port[msg->port];
680 p_priv = usb_get_serial_port_data(port);
681
682 /* Update handshaking pin state information */
683 old_dcd_state = p_priv->dcd_state;
684 p_priv->cts_state = ((msg->cts) ? 1 : 0);
685 p_priv->dsr_state = ((msg->dsr) ? 1 : 0);
686 p_priv->dcd_state = ((msg->dcd) ? 1 : 0);
687 p_priv->ri_state = ((msg->ri) ? 1 : 0);
688
689 if( old_dcd_state != p_priv->dcd_state && old_dcd_state) {
690 tty = tty_port_tty_get(&port->port);
691 if (tty && !C_CLOCAL(tty))
692 tty_hangup(tty);
693 tty_kref_put(tty);
694 }
695
696 /* Resubmit urb so we continue receiving */
697 urb->dev = serial->dev;
698 err = usb_submit_urb(urb, GFP_ATOMIC);
699 if (err != 0)
700 dbg("%s - resubmit read urb failed. (%d)", __func__, err);
701 exit: ;
702 }
703
704 static void usa28_glocont_callback(struct urb *urb)
705 {
706 dbg("%s", __func__);
707 }
708
709
710 static void usa49_glocont_callback(struct urb *urb)
711 {
712 struct usb_serial *serial;
713 struct usb_serial_port *port;
714 struct keyspan_port_private *p_priv;
715 int i;
716
717 dbg("%s", __func__);
718
719 serial = urb->context;
720 for (i = 0; i < serial->num_ports; ++i) {
721 port = serial->port[i];
722 p_priv = usb_get_serial_port_data(port);
723
724 if (p_priv->resend_cont) {
725 dbg("%s - sending setup", __func__);
726 keyspan_usa49_send_setup(serial, port,
727 p_priv->resend_cont - 1);
728 break;
729 }
730 }
731 }
732
733 /* This is actually called glostat in the Keyspan
734 doco */
735 static void usa49_instat_callback(struct urb *urb)
736 {
737 int err;
738 unsigned char *data = urb->transfer_buffer;
739 struct keyspan_usa49_portStatusMessage *msg;
740 struct usb_serial *serial;
741 struct usb_serial_port *port;
742 struct keyspan_port_private *p_priv;
743 int old_dcd_state;
744 int status = urb->status;
745
746 dbg("%s", __func__);
747
748 serial = urb->context;
749
750 if (status) {
751 dbg("%s - nonzero status: %x", __func__, status);
752 return;
753 }
754
755 if (urb->actual_length !=
756 sizeof(struct keyspan_usa49_portStatusMessage)) {
757 dbg("%s - bad length %d", __func__, urb->actual_length);
758 goto exit;
759 }
760
761 /*dbg(" %x %x %x %x %x %x %x %x %x %x %x", __func__,
762 data[0], data[1], data[2], data[3], data[4], data[5],
763 data[6], data[7], data[8], data[9], data[10]);*/
764
765 /* Now do something useful with the data */
766 msg = (struct keyspan_usa49_portStatusMessage *)data;
767
768 /* Check port number from message and retrieve private data */
769 if (msg->portNumber >= serial->num_ports) {
770 dbg("%s - Unexpected port number %d",
771 __func__, msg->portNumber);
772 goto exit;
773 }
774 port = serial->port[msg->portNumber];
775 p_priv = usb_get_serial_port_data(port);
776
777 /* Update handshaking pin state information */
778 old_dcd_state = p_priv->dcd_state;
779 p_priv->cts_state = ((msg->cts) ? 1 : 0);
780 p_priv->dsr_state = ((msg->dsr) ? 1 : 0);
781 p_priv->dcd_state = ((msg->dcd) ? 1 : 0);
782 p_priv->ri_state = ((msg->ri) ? 1 : 0);
783
784 if (old_dcd_state != p_priv->dcd_state && old_dcd_state) {
785 struct tty_struct *tty = tty_port_tty_get(&port->port);
786 if (tty && !C_CLOCAL(tty))
787 tty_hangup(tty);
788 tty_kref_put(tty);
789 }
790
791 /* Resubmit urb so we continue receiving */
792 urb->dev = serial->dev;
793
794 err = usb_submit_urb(urb, GFP_ATOMIC);
795 if (err != 0)
796 dbg("%s - resubmit read urb failed. (%d)", __func__, err);
797 exit: ;
798 }
799
800 static void usa49_inack_callback(struct urb *urb)
801 {
802 dbg("%s", __func__);
803 }
804
805 static void usa49_indat_callback(struct urb *urb)
806 {
807 int i, err;
808 int endpoint;
809 struct usb_serial_port *port;
810 struct tty_struct *tty;
811 unsigned char *data = urb->transfer_buffer;
812 int status = urb->status;
813
814 dbg("%s", __func__);
815
816 endpoint = usb_pipeendpoint(urb->pipe);
817
818 if (status) {
819 dbg("%s - nonzero status: %x on endpoint %d.", __func__,
820 status, endpoint);
821 return;
822 }
823
824 port = urb->context;
825 tty = tty_port_tty_get(&port->port);
826 if (tty && urb->actual_length) {
827 /* 0x80 bit is error flag */
828 if ((data[0] & 0x80) == 0) {
829 /* no error on any byte */
830 tty_insert_flip_string(tty, data + 1,
831 urb->actual_length - 1);
832 } else {
833 /* some bytes had errors, every byte has status */
834 for (i = 0; i + 1 < urb->actual_length; i += 2) {
835 int stat = data[i], flag = 0;
836 if (stat & RXERROR_OVERRUN)
837 flag |= TTY_OVERRUN;
838 if (stat & RXERROR_FRAMING)
839 flag |= TTY_FRAME;
840 if (stat & RXERROR_PARITY)
841 flag |= TTY_PARITY;
842 /* XXX should handle break (0x10) */
843 tty_insert_flip_char(tty, data[i+1], flag);
844 }
845 }
846 tty_flip_buffer_push(tty);
847 }
848 tty_kref_put(tty);
849
850 /* Resubmit urb so we continue receiving */
851 urb->dev = port->serial->dev;
852 err = usb_submit_urb(urb, GFP_ATOMIC);
853 if (err != 0)
854 dbg("%s - resubmit read urb failed. (%d)", __func__, err);
855 }
856
857 static void usa49wg_indat_callback(struct urb *urb)
858 {
859 int i, len, x, err;
860 struct usb_serial *serial;
861 struct usb_serial_port *port;
862 struct tty_struct *tty;
863 unsigned char *data = urb->transfer_buffer;
864 int status = urb->status;
865
866 dbg("%s", __func__);
867
868 serial = urb->context;
869
870 if (status) {
871 dbg("%s - nonzero status: %x", __func__, status);
872 return;
873 }
874
875 /* inbound data is in the form P#, len, status, data */
876 i = 0;
877 len = 0;
878
879 if (urb->actual_length) {
880 while (i < urb->actual_length) {
881
882 /* Check port number from message*/
883 if (data[i] >= serial->num_ports) {
884 dbg("%s - Unexpected port number %d",
885 __func__, data[i]);
886 return;
887 }
888 port = serial->port[data[i++]];
889 tty = tty_port_tty_get(&port->port);
890 len = data[i++];
891
892 /* 0x80 bit is error flag */
893 if ((data[i] & 0x80) == 0) {
894 /* no error on any byte */
895 i++;
896 for (x = 1; x < len ; ++x)
897 tty_insert_flip_char(tty, data[i++], 0);
898 } else {
899 /*
900 * some bytes had errors, every byte has status
901 */
902 for (x = 0; x + 1 < len; x += 2) {
903 int stat = data[i], flag = 0;
904 if (stat & RXERROR_OVERRUN)
905 flag |= TTY_OVERRUN;
906 if (stat & RXERROR_FRAMING)
907 flag |= TTY_FRAME;
908 if (stat & RXERROR_PARITY)
909 flag |= TTY_PARITY;
910 /* XXX should handle break (0x10) */
911 tty_insert_flip_char(tty,
912 data[i+1], flag);
913 i += 2;
914 }
915 }
916 tty_flip_buffer_push(tty);
917 tty_kref_put(tty);
918 }
919 }
920
921 /* Resubmit urb so we continue receiving */
922 urb->dev = serial->dev;
923
924 err = usb_submit_urb(urb, GFP_ATOMIC);
925 if (err != 0)
926 dbg("%s - resubmit read urb failed. (%d)", __func__, err);
927 }
928
929 /* not used, usa-49 doesn't have per-port control endpoints */
930 static void usa49_outcont_callback(struct urb *urb)
931 {
932 dbg("%s", __func__);
933 }
934
935 static void usa90_indat_callback(struct urb *urb)
936 {
937 int i, err;
938 int endpoint;
939 struct usb_serial_port *port;
940 struct keyspan_port_private *p_priv;
941 struct tty_struct *tty;
942 unsigned char *data = urb->transfer_buffer;
943 int status = urb->status;
944
945 dbg("%s", __func__);
946
947 endpoint = usb_pipeendpoint(urb->pipe);
948
949 if (status) {
950 dbg("%s - nonzero status: %x on endpoint %d.",
951 __func__, status, endpoint);
952 return;
953 }
954
955 port = urb->context;
956 p_priv = usb_get_serial_port_data(port);
957
958 if (urb->actual_length) {
959 tty = tty_port_tty_get(&port->port);
960 /* if current mode is DMA, looks like usa28 format
961 otherwise looks like usa26 data format */
962
963 if (p_priv->baud > 57600)
964 tty_insert_flip_string(tty, data, urb->actual_length);
965 else {
966 /* 0x80 bit is error flag */
967 if ((data[0] & 0x80) == 0) {
968 /* no errors on individual bytes, only
969 possible overrun err*/
970 if (data[0] & RXERROR_OVERRUN)
971 err = TTY_OVERRUN;
972 else
973 err = 0;
974 for (i = 1; i < urb->actual_length ; ++i)
975 tty_insert_flip_char(tty, data[i],
976 err);
977 } else {
978 /* some bytes had errors, every byte has status */
979 dbg("%s - RX error!!!!", __func__);
980 for (i = 0; i + 1 < urb->actual_length; i += 2) {
981 int stat = data[i], flag = 0;
982 if (stat & RXERROR_OVERRUN)
983 flag |= TTY_OVERRUN;
984 if (stat & RXERROR_FRAMING)
985 flag |= TTY_FRAME;
986 if (stat & RXERROR_PARITY)
987 flag |= TTY_PARITY;
988 /* XXX should handle break (0x10) */
989 tty_insert_flip_char(tty, data[i+1],
990 flag);
991 }
992 }
993 }
994 tty_flip_buffer_push(tty);
995 tty_kref_put(tty);
996 }
997
998 /* Resubmit urb so we continue receiving */
999 urb->dev = port->serial->dev;
1000 err = usb_submit_urb(urb, GFP_ATOMIC);
1001 if (err != 0)
1002 dbg("%s - resubmit read urb failed. (%d)", __func__, err);
1003 }
1004
1005
1006 static void usa90_instat_callback(struct urb *urb)
1007 {
1008 unsigned char *data = urb->transfer_buffer;
1009 struct keyspan_usa90_portStatusMessage *msg;
1010 struct usb_serial *serial;
1011 struct usb_serial_port *port;
1012 struct keyspan_port_private *p_priv;
1013 struct tty_struct *tty;
1014 int old_dcd_state, err;
1015 int status = urb->status;
1016
1017 serial = urb->context;
1018
1019 if (status) {
1020 dbg("%s - nonzero status: %x", __func__, status);
1021 return;
1022 }
1023 if (urb->actual_length < 14) {
1024 dbg("%s - %d byte report??", __func__, urb->actual_length);
1025 goto exit;
1026 }
1027
1028 msg = (struct keyspan_usa90_portStatusMessage *)data;
1029
1030 /* Now do something useful with the data */
1031
1032 port = serial->port[0];
1033 p_priv = usb_get_serial_port_data(port);
1034
1035 /* Update handshaking pin state information */
1036 old_dcd_state = p_priv->dcd_state;
1037 p_priv->cts_state = ((msg->cts) ? 1 : 0);
1038 p_priv->dsr_state = ((msg->dsr) ? 1 : 0);
1039 p_priv->dcd_state = ((msg->dcd) ? 1 : 0);
1040 p_priv->ri_state = ((msg->ri) ? 1 : 0);
1041
1042 if (old_dcd_state != p_priv->dcd_state && old_dcd_state) {
1043 tty = tty_port_tty_get(&port->port);
1044 if (tty && !C_CLOCAL(tty))
1045 tty_hangup(tty);
1046 tty_kref_put(tty);
1047 }
1048
1049 /* Resubmit urb so we continue receiving */
1050 urb->dev = serial->dev;
1051 err = usb_submit_urb(urb, GFP_ATOMIC);
1052 if (err != 0)
1053 dbg("%s - resubmit read urb failed. (%d)", __func__, err);
1054 exit:
1055 ;
1056 }
1057
1058 static void usa90_outcont_callback(struct urb *urb)
1059 {
1060 struct usb_serial_port *port;
1061 struct keyspan_port_private *p_priv;
1062
1063 port = urb->context;
1064 p_priv = usb_get_serial_port_data(port);
1065
1066 if (p_priv->resend_cont) {
1067 dbg("%s - sending setup", __func__);
1068 keyspan_usa90_send_setup(port->serial, port,
1069 p_priv->resend_cont - 1);
1070 }
1071 }
1072
1073 /* Status messages from the 28xg */
1074 static void usa67_instat_callback(struct urb *urb)
1075 {
1076 int err;
1077 unsigned char *data = urb->transfer_buffer;
1078 struct keyspan_usa67_portStatusMessage *msg;
1079 struct usb_serial *serial;
1080 struct usb_serial_port *port;
1081 struct keyspan_port_private *p_priv;
1082 int old_dcd_state;
1083 int status = urb->status;
1084
1085 dbg("%s", __func__);
1086
1087 serial = urb->context;
1088
1089 if (status) {
1090 dbg("%s - nonzero status: %x", __func__, status);
1091 return;
1092 }
1093
1094 if (urb->actual_length !=
1095 sizeof(struct keyspan_usa67_portStatusMessage)) {
1096 dbg("%s - bad length %d", __func__, urb->actual_length);
1097 return;
1098 }
1099
1100
1101 /* Now do something useful with the data */
1102 msg = (struct keyspan_usa67_portStatusMessage *)data;
1103
1104 /* Check port number from message and retrieve private data */
1105 if (msg->port >= serial->num_ports) {
1106 dbg("%s - Unexpected port number %d", __func__, msg->port);
1107 return;
1108 }
1109
1110 port = serial->port[msg->port];
1111 p_priv = usb_get_serial_port_data(port);
1112
1113 /* Update handshaking pin state information */
1114 old_dcd_state = p_priv->dcd_state;
1115 p_priv->cts_state = ((msg->hskia_cts) ? 1 : 0);
1116 p_priv->dcd_state = ((msg->gpia_dcd) ? 1 : 0);
1117
1118 if (old_dcd_state != p_priv->dcd_state && old_dcd_state) {
1119 struct tty_struct *tty = tty_port_tty_get(&port->port);
1120 if (tty && !C_CLOCAL(tty))
1121 tty_hangup(tty);
1122 tty_kref_put(tty);
1123 }
1124
1125 /* Resubmit urb so we continue receiving */
1126 urb->dev = serial->dev;
1127 err = usb_submit_urb(urb, GFP_ATOMIC);
1128 if (err != 0)
1129 dbg("%s - resubmit read urb failed. (%d)", __func__, err);
1130 }
1131
1132 static void usa67_glocont_callback(struct urb *urb)
1133 {
1134 struct usb_serial *serial;
1135 struct usb_serial_port *port;
1136 struct keyspan_port_private *p_priv;
1137 int i;
1138
1139 dbg("%s", __func__);
1140
1141 serial = urb->context;
1142 for (i = 0; i < serial->num_ports; ++i) {
1143 port = serial->port[i];
1144 p_priv = usb_get_serial_port_data(port);
1145
1146 if (p_priv->resend_cont) {
1147 dbg("%s - sending setup", __func__);
1148 keyspan_usa67_send_setup(serial, port,
1149 p_priv->resend_cont - 1);
1150 break;
1151 }
1152 }
1153 }
1154
1155 static int keyspan_write_room(struct tty_struct *tty)
1156 {
1157 struct usb_serial_port *port = tty->driver_data;
1158 struct keyspan_port_private *p_priv;
1159 const struct keyspan_device_details *d_details;
1160 int flip;
1161 int data_len;
1162 struct urb *this_urb;
1163
1164 dbg("%s", __func__);
1165 p_priv = usb_get_serial_port_data(port);
1166 d_details = p_priv->device_details;
1167
1168 /* FIXME: locking */
1169 if (d_details->msg_format == msg_usa90)
1170 data_len = 64;
1171 else
1172 data_len = 63;
1173
1174 flip = p_priv->out_flip;
1175
1176 /* Check both endpoints to see if any are available. */
1177 this_urb = p_priv->out_urbs[flip];
1178 if (this_urb != NULL) {
1179 if (this_urb->status != -EINPROGRESS)
1180 return data_len;
1181 flip = (flip + 1) & d_details->outdat_endp_flip;
1182 this_urb = p_priv->out_urbs[flip];
1183 if (this_urb != NULL) {
1184 if (this_urb->status != -EINPROGRESS)
1185 return data_len;
1186 }
1187 }
1188 return 0;
1189 }
1190
1191
1192 static int keyspan_open(struct tty_struct *tty, struct usb_serial_port *port)
1193 {
1194 struct keyspan_port_private *p_priv;
1195 struct keyspan_serial_private *s_priv;
1196 struct usb_serial *serial = port->serial;
1197 const struct keyspan_device_details *d_details;
1198 int i, err;
1199 int baud_rate, device_port;
1200 struct urb *urb;
1201 unsigned int cflag = 0;
1202
1203 s_priv = usb_get_serial_data(serial);
1204 p_priv = usb_get_serial_port_data(port);
1205 d_details = p_priv->device_details;
1206
1207 dbg("%s - port%d.", __func__, port->number);
1208
1209 /* Set some sane defaults */
1210 p_priv->rts_state = 1;
1211 p_priv->dtr_state = 1;
1212 p_priv->baud = 9600;
1213
1214 /* force baud and lcr to be set on open */
1215 p_priv->old_baud = 0;
1216 p_priv->old_cflag = 0;
1217
1218 p_priv->out_flip = 0;
1219 p_priv->in_flip = 0;
1220
1221 /* Reset low level data toggle and start reading from endpoints */
1222 for (i = 0; i < 2; i++) {
1223 urb = p_priv->in_urbs[i];
1224 if (urb == NULL)
1225 continue;
1226 urb->dev = serial->dev;
1227
1228 /* make sure endpoint data toggle is synchronized
1229 with the device */
1230 usb_clear_halt(urb->dev, urb->pipe);
1231 err = usb_submit_urb(urb, GFP_KERNEL);
1232 if (err != 0)
1233 dbg("%s - submit urb %d failed (%d)",
1234 __func__, i, err);
1235 }
1236
1237 /* Reset low level data toggle on out endpoints */
1238 for (i = 0; i < 2; i++) {
1239 urb = p_priv->out_urbs[i];
1240 if (urb == NULL)
1241 continue;
1242 urb->dev = serial->dev;
1243 /* usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe),
1244 usb_pipeout(urb->pipe), 0); */
1245 }
1246
1247 /* get the terminal config for the setup message now so we don't
1248 * need to send 2 of them */
1249
1250 device_port = port->number - port->serial->minor;
1251 if (tty) {
1252 cflag = tty->termios->c_cflag;
1253 /* Baud rate calculation takes baud rate as an integer
1254 so other rates can be generated if desired. */
1255 baud_rate = tty_get_baud_rate(tty);
1256 /* If no match or invalid, leave as default */
1257 if (baud_rate >= 0
1258 && d_details->calculate_baud_rate(baud_rate, d_details->baudclk,
1259 NULL, NULL, NULL, device_port) == KEYSPAN_BAUD_RATE_OK) {
1260 p_priv->baud = baud_rate;
1261 }
1262 }
1263 /* set CTS/RTS handshake etc. */
1264 p_priv->cflag = cflag;
1265 p_priv->flow_control = (cflag & CRTSCTS)? flow_cts: flow_none;
1266
1267 keyspan_send_setup(port, 1);
1268 /* mdelay(100); */
1269 /* keyspan_set_termios(port, NULL); */
1270
1271 return 0;
1272 }
1273
1274 static inline void stop_urb(struct urb *urb)
1275 {
1276 if (urb && urb->status == -EINPROGRESS)
1277 usb_kill_urb(urb);
1278 }
1279
1280 static void keyspan_dtr_rts(struct usb_serial_port *port, int on)
1281 {
1282 struct keyspan_port_private *p_priv = usb_get_serial_port_data(port);
1283
1284 p_priv->rts_state = on;
1285 p_priv->dtr_state = on;
1286 keyspan_send_setup(port, 0);
1287 }
1288
1289 static void keyspan_close(struct usb_serial_port *port)
1290 {
1291 int i;
1292 struct usb_serial *serial = port->serial;
1293 struct keyspan_serial_private *s_priv;
1294 struct keyspan_port_private *p_priv;
1295
1296 dbg("%s", __func__);
1297 s_priv = usb_get_serial_data(serial);
1298 p_priv = usb_get_serial_port_data(port);
1299
1300 p_priv->rts_state = 0;
1301 p_priv->dtr_state = 0;
1302
1303 if (serial->dev) {
1304 keyspan_send_setup(port, 2);
1305 /* pilot-xfer seems to work best with this delay */
1306 mdelay(100);
1307 /* keyspan_set_termios(port, NULL); */
1308 }
1309
1310 /*while (p_priv->outcont_urb->status == -EINPROGRESS) {
1311 dbg("%s - urb in progress", __func__);
1312 }*/
1313
1314 p_priv->out_flip = 0;
1315 p_priv->in_flip = 0;
1316
1317 if (serial->dev) {
1318 /* Stop reading/writing urbs */
1319 stop_urb(p_priv->inack_urb);
1320 /* stop_urb(p_priv->outcont_urb); */
1321 for (i = 0; i < 2; i++) {
1322 stop_urb(p_priv->in_urbs[i]);
1323 stop_urb(p_priv->out_urbs[i]);
1324 }
1325 }
1326 }
1327
1328 /* download the firmware to a pre-renumeration device */
1329 static int keyspan_fake_startup(struct usb_serial *serial)
1330 {
1331 int response;
1332 const struct ihex_binrec *record;
1333 char *fw_name;
1334 const struct firmware *fw;
1335
1336 dbg("Keyspan startup version %04x product %04x",
1337 le16_to_cpu(serial->dev->descriptor.bcdDevice),
1338 le16_to_cpu(serial->dev->descriptor.idProduct));
1339
1340 if ((le16_to_cpu(serial->dev->descriptor.bcdDevice) & 0x8000)
1341 != 0x8000) {
1342 dbg("Firmware already loaded. Quitting.");
1343 return 1;
1344 }
1345
1346 /* Select firmware image on the basis of idProduct */
1347 switch (le16_to_cpu(serial->dev->descriptor.idProduct)) {
1348 case keyspan_usa28_pre_product_id:
1349 fw_name = "keyspan/usa28.fw";
1350 break;
1351
1352 case keyspan_usa28x_pre_product_id:
1353 fw_name = "keyspan/usa28x.fw";
1354 break;
1355
1356 case keyspan_usa28xa_pre_product_id:
1357 fw_name = "keyspan/usa28xa.fw";
1358 break;
1359
1360 case keyspan_usa28xb_pre_product_id:
1361 fw_name = "keyspan/usa28xb.fw";
1362 break;
1363
1364 case keyspan_usa19_pre_product_id:
1365 fw_name = "keyspan/usa19.fw";
1366 break;
1367
1368 case keyspan_usa19qi_pre_product_id:
1369 fw_name = "keyspan/usa19qi.fw";
1370 break;
1371
1372 case keyspan_mpr_pre_product_id:
1373 fw_name = "keyspan/mpr.fw";
1374 break;
1375
1376 case keyspan_usa19qw_pre_product_id:
1377 fw_name = "keyspan/usa19qw.fw";
1378 break;
1379
1380 case keyspan_usa18x_pre_product_id:
1381 fw_name = "keyspan/usa18x.fw";
1382 break;
1383
1384 case keyspan_usa19w_pre_product_id:
1385 fw_name = "keyspan/usa19w.fw";
1386 break;
1387
1388 case keyspan_usa49w_pre_product_id:
1389 fw_name = "keyspan/usa49w.fw";
1390 break;
1391
1392 case keyspan_usa49wlc_pre_product_id:
1393 fw_name = "keyspan/usa49wlc.fw";
1394 break;
1395
1396 default:
1397 dev_err(&serial->dev->dev, "Unknown product ID (%04x)\n",
1398 le16_to_cpu(serial->dev->descriptor.idProduct));
1399 return 1;
1400 }
1401
1402 if (request_ihex_firmware(&fw, fw_name, &serial->dev->dev)) {
1403 dev_err(&serial->dev->dev, "Required keyspan firmware image (%s) unavailable.\n", fw_name);
1404 return(1);
1405 }
1406
1407 dbg("Uploading Keyspan %s firmware.", fw_name);
1408
1409 /* download the firmware image */
1410 response = ezusb_set_reset(serial, 1);
1411
1412 record = (const struct ihex_binrec *)fw->data;
1413
1414 while (record) {
1415 response = ezusb_writememory(serial, be32_to_cpu(record->addr),
1416 (unsigned char *)record->data,
1417 be16_to_cpu(record->len), 0xa0);
1418 if (response < 0) {
1419 dev_err(&serial->dev->dev, "ezusb_writememory failed for Keyspan firmware (%d %04X %p %d)\n",
1420 response, be32_to_cpu(record->addr),
1421 record->data, be16_to_cpu(record->len));
1422 break;
1423 }
1424 record = ihex_next_binrec(record);
1425 }
1426 release_firmware(fw);
1427 /* bring device out of reset. Renumeration will occur in a
1428 moment and the new device will bind to the real driver */
1429 response = ezusb_set_reset(serial, 0);
1430
1431 /* we don't want this device to have a driver assigned to it. */
1432 return 1;
1433 }
1434
1435 /* Helper functions used by keyspan_setup_urbs */
1436 static struct usb_endpoint_descriptor const *find_ep(struct usb_serial const *serial,
1437 int endpoint)
1438 {
1439 struct usb_host_interface *iface_desc;
1440 struct usb_endpoint_descriptor *ep;
1441 int i;
1442
1443 iface_desc = serial->interface->cur_altsetting;
1444 for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
1445 ep = &iface_desc->endpoint[i].desc;
1446 if (ep->bEndpointAddress == endpoint)
1447 return ep;
1448 }
1449 dev_warn(&serial->interface->dev, "found no endpoint descriptor for "
1450 "endpoint %x\n", endpoint);
1451 return NULL;
1452 }
1453
1454 static struct urb *keyspan_setup_urb(struct usb_serial *serial, int endpoint,
1455 int dir, void *ctx, char *buf, int len,
1456 void (*callback)(struct urb *))
1457 {
1458 struct urb *urb;
1459 struct usb_endpoint_descriptor const *ep_desc;
1460 char const *ep_type_name;
1461
1462 if (endpoint == -1)
1463 return NULL; /* endpoint not needed */
1464
1465 dbg("%s - alloc for endpoint %d.", __func__, endpoint);
1466 urb = usb_alloc_urb(0, GFP_KERNEL); /* No ISO */
1467 if (urb == NULL) {
1468 dbg("%s - alloc for endpoint %d failed.", __func__, endpoint);
1469 return NULL;
1470 }
1471
1472 if (endpoint == 0) {
1473 /* control EP filled in when used */
1474 return urb;
1475 }
1476
1477 ep_desc = find_ep(serial, endpoint);
1478 if (!ep_desc) {
1479 /* leak the urb, something's wrong and the callers don't care */
1480 return urb;
1481 }
1482 if (usb_endpoint_xfer_int(ep_desc)) {
1483 ep_type_name = "INT";
1484 usb_fill_int_urb(urb, serial->dev,
1485 usb_sndintpipe(serial->dev, endpoint) | dir,
1486 buf, len, callback, ctx,
1487 ep_desc->bInterval);
1488 } else if (usb_endpoint_xfer_bulk(ep_desc)) {
1489 ep_type_name = "BULK";
1490 usb_fill_bulk_urb(urb, serial->dev,
1491 usb_sndbulkpipe(serial->dev, endpoint) | dir,
1492 buf, len, callback, ctx);
1493 } else {
1494 dev_warn(&serial->interface->dev,
1495 "unsupported endpoint type %x\n",
1496 usb_endpoint_type(ep_desc));
1497 usb_free_urb(urb);
1498 return NULL;
1499 }
1500
1501 dbg("%s - using urb %p for %s endpoint %x",
1502 __func__, urb, ep_type_name, endpoint);
1503 return urb;
1504 }
1505
1506 static struct callbacks {
1507 void (*instat_callback)(struct urb *);
1508 void (*glocont_callback)(struct urb *);
1509 void (*indat_callback)(struct urb *);
1510 void (*outdat_callback)(struct urb *);
1511 void (*inack_callback)(struct urb *);
1512 void (*outcont_callback)(struct urb *);
1513 } keyspan_callbacks[] = {
1514 {
1515 /* msg_usa26 callbacks */
1516 .instat_callback = usa26_instat_callback,
1517 .glocont_callback = usa26_glocont_callback,
1518 .indat_callback = usa26_indat_callback,
1519 .outdat_callback = usa2x_outdat_callback,
1520 .inack_callback = usa26_inack_callback,
1521 .outcont_callback = usa26_outcont_callback,
1522 }, {
1523 /* msg_usa28 callbacks */
1524 .instat_callback = usa28_instat_callback,
1525 .glocont_callback = usa28_glocont_callback,
1526 .indat_callback = usa28_indat_callback,
1527 .outdat_callback = usa2x_outdat_callback,
1528 .inack_callback = usa28_inack_callback,
1529 .outcont_callback = usa28_outcont_callback,
1530 }, {
1531 /* msg_usa49 callbacks */
1532 .instat_callback = usa49_instat_callback,
1533 .glocont_callback = usa49_glocont_callback,
1534 .indat_callback = usa49_indat_callback,
1535 .outdat_callback = usa2x_outdat_callback,
1536 .inack_callback = usa49_inack_callback,
1537 .outcont_callback = usa49_outcont_callback,
1538 }, {
1539 /* msg_usa90 callbacks */
1540 .instat_callback = usa90_instat_callback,
1541 .glocont_callback = usa28_glocont_callback,
1542 .indat_callback = usa90_indat_callback,
1543 .outdat_callback = usa2x_outdat_callback,
1544 .inack_callback = usa28_inack_callback,
1545 .outcont_callback = usa90_outcont_callback,
1546 }, {
1547 /* msg_usa67 callbacks */
1548 .instat_callback = usa67_instat_callback,
1549 .glocont_callback = usa67_glocont_callback,
1550 .indat_callback = usa26_indat_callback,
1551 .outdat_callback = usa2x_outdat_callback,
1552 .inack_callback = usa26_inack_callback,
1553 .outcont_callback = usa26_outcont_callback,
1554 }
1555 };
1556
1557 /* Generic setup urbs function that uses
1558 data in device_details */
1559 static void keyspan_setup_urbs(struct usb_serial *serial)
1560 {
1561 int i, j;
1562 struct keyspan_serial_private *s_priv;
1563 const struct keyspan_device_details *d_details;
1564 struct usb_serial_port *port;
1565 struct keyspan_port_private *p_priv;
1566 struct callbacks *cback;
1567 int endp;
1568
1569 dbg("%s", __func__);
1570
1571 s_priv = usb_get_serial_data(serial);
1572 d_details = s_priv->device_details;
1573
1574 /* Setup values for the various callback routines */
1575 cback = &keyspan_callbacks[d_details->msg_format];
1576
1577 /* Allocate and set up urbs for each one that is in use,
1578 starting with instat endpoints */
1579 s_priv->instat_urb = keyspan_setup_urb
1580 (serial, d_details->instat_endpoint, USB_DIR_IN,
1581 serial, s_priv->instat_buf, INSTAT_BUFLEN,
1582 cback->instat_callback);
1583
1584 s_priv->indat_urb = keyspan_setup_urb
1585 (serial, d_details->indat_endpoint, USB_DIR_IN,
1586 serial, s_priv->indat_buf, INDAT49W_BUFLEN,
1587 usa49wg_indat_callback);
1588
1589 s_priv->glocont_urb = keyspan_setup_urb
1590 (serial, d_details->glocont_endpoint, USB_DIR_OUT,
1591 serial, s_priv->glocont_buf, GLOCONT_BUFLEN,
1592 cback->glocont_callback);
1593
1594 /* Setup endpoints for each port specific thing */
1595 for (i = 0; i < d_details->num_ports; i++) {
1596 port = serial->port[i];
1597 p_priv = usb_get_serial_port_data(port);
1598
1599 /* Do indat endpoints first, once for each flip */
1600 endp = d_details->indat_endpoints[i];
1601 for (j = 0; j <= d_details->indat_endp_flip; ++j, ++endp) {
1602 p_priv->in_urbs[j] = keyspan_setup_urb
1603 (serial, endp, USB_DIR_IN, port,
1604 p_priv->in_buffer[j], 64,
1605 cback->indat_callback);
1606 }
1607 for (; j < 2; ++j)
1608 p_priv->in_urbs[j] = NULL;
1609
1610 /* outdat endpoints also have flip */
1611 endp = d_details->outdat_endpoints[i];
1612 for (j = 0; j <= d_details->outdat_endp_flip; ++j, ++endp) {
1613 p_priv->out_urbs[j] = keyspan_setup_urb
1614 (serial, endp, USB_DIR_OUT, port,
1615 p_priv->out_buffer[j], 64,
1616 cback->outdat_callback);
1617 }
1618 for (; j < 2; ++j)
1619 p_priv->out_urbs[j] = NULL;
1620
1621 /* inack endpoint */
1622 p_priv->inack_urb = keyspan_setup_urb
1623 (serial, d_details->inack_endpoints[i], USB_DIR_IN,
1624 port, p_priv->inack_buffer, 1, cback->inack_callback);
1625
1626 /* outcont endpoint */
1627 p_priv->outcont_urb = keyspan_setup_urb
1628 (serial, d_details->outcont_endpoints[i], USB_DIR_OUT,
1629 port, p_priv->outcont_buffer, 64,
1630 cback->outcont_callback);
1631 }
1632 }
1633
1634 /* usa19 function doesn't require prescaler */
1635 static int keyspan_usa19_calc_baud(u32 baud_rate, u32 baudclk, u8 *rate_hi,
1636 u8 *rate_low, u8 *prescaler, int portnum)
1637 {
1638 u32 b16, /* baud rate times 16 (actual rate used internally) */
1639 div, /* divisor */
1640 cnt; /* inverse of divisor (programmed into 8051) */
1641
1642 dbg("%s - %d.", __func__, baud_rate);
1643
1644 /* prevent divide by zero... */
1645 b16 = baud_rate * 16L;
1646 if (b16 == 0)
1647 return KEYSPAN_INVALID_BAUD_RATE;
1648 /* Any "standard" rate over 57k6 is marginal on the USA-19
1649 as we run out of divisor resolution. */
1650 if (baud_rate > 57600)
1651 return KEYSPAN_INVALID_BAUD_RATE;
1652
1653 /* calculate the divisor and the counter (its inverse) */
1654 div = baudclk / b16;
1655 if (div == 0)
1656 return KEYSPAN_INVALID_BAUD_RATE;
1657 else
1658 cnt = 0 - div;
1659
1660 if (div > 0xffff)
1661 return KEYSPAN_INVALID_BAUD_RATE;
1662
1663 /* return the counter values if non-null */
1664 if (rate_low)
1665 *rate_low = (u8) (cnt & 0xff);
1666 if (rate_hi)
1667 *rate_hi = (u8) ((cnt >> 8) & 0xff);
1668 if (rate_low && rate_hi)
1669 dbg("%s - %d %02x %02x.",
1670 __func__, baud_rate, *rate_hi, *rate_low);
1671 return KEYSPAN_BAUD_RATE_OK;
1672 }
1673
1674 /* usa19hs function doesn't require prescaler */
1675 static int keyspan_usa19hs_calc_baud(u32 baud_rate, u32 baudclk, u8 *rate_hi,
1676 u8 *rate_low, u8 *prescaler, int portnum)
1677 {
1678 u32 b16, /* baud rate times 16 (actual rate used internally) */
1679 div; /* divisor */
1680
1681 dbg("%s - %d.", __func__, baud_rate);
1682
1683 /* prevent divide by zero... */
1684 b16 = baud_rate * 16L;
1685 if (b16 == 0)
1686 return KEYSPAN_INVALID_BAUD_RATE;
1687
1688 /* calculate the divisor */
1689 div = baudclk / b16;
1690 if (div == 0)
1691 return KEYSPAN_INVALID_BAUD_RATE;
1692
1693 if (div > 0xffff)
1694 return KEYSPAN_INVALID_BAUD_RATE;
1695
1696 /* return the counter values if non-null */
1697 if (rate_low)
1698 *rate_low = (u8) (div & 0xff);
1699
1700 if (rate_hi)
1701 *rate_hi = (u8) ((div >> 8) & 0xff);
1702
1703 if (rate_low && rate_hi)
1704 dbg("%s - %d %02x %02x.",
1705 __func__, baud_rate, *rate_hi, *rate_low);
1706
1707 return KEYSPAN_BAUD_RATE_OK;
1708 }
1709
1710 static int keyspan_usa19w_calc_baud(u32 baud_rate, u32 baudclk, u8 *rate_hi,
1711 u8 *rate_low, u8 *prescaler, int portnum)
1712 {
1713 u32 b16, /* baud rate times 16 (actual rate used internally) */
1714 clk, /* clock with 13/8 prescaler */
1715 div, /* divisor using 13/8 prescaler */
1716 res, /* resulting baud rate using 13/8 prescaler */
1717 diff, /* error using 13/8 prescaler */
1718 smallest_diff;
1719 u8 best_prescaler;
1720 int i;
1721
1722 dbg("%s - %d.", __func__, baud_rate);
1723
1724 /* prevent divide by zero */
1725 b16 = baud_rate * 16L;
1726 if (b16 == 0)
1727 return KEYSPAN_INVALID_BAUD_RATE;
1728
1729 /* Calculate prescaler by trying them all and looking
1730 for best fit */
1731
1732 /* start with largest possible difference */
1733 smallest_diff = 0xffffffff;
1734
1735 /* 0 is an invalid prescaler, used as a flag */
1736 best_prescaler = 0;
1737
1738 for (i = 8; i <= 0xff; ++i) {
1739 clk = (baudclk * 8) / (u32) i;
1740
1741 div = clk / b16;
1742 if (div == 0)
1743 continue;
1744
1745 res = clk / div;
1746 diff = (res > b16) ? (res-b16) : (b16-res);
1747
1748 if (diff < smallest_diff) {
1749 best_prescaler = i;
1750 smallest_diff = diff;
1751 }
1752 }
1753
1754 if (best_prescaler == 0)
1755 return KEYSPAN_INVALID_BAUD_RATE;
1756
1757 clk = (baudclk * 8) / (u32) best_prescaler;
1758 div = clk / b16;
1759
1760 /* return the divisor and prescaler if non-null */
1761 if (rate_low)
1762 *rate_low = (u8) (div & 0xff);
1763 if (rate_hi)
1764 *rate_hi = (u8) ((div >> 8) & 0xff);
1765 if (prescaler) {
1766 *prescaler = best_prescaler;
1767 /* dbg("%s - %d %d", __func__, *prescaler, div); */
1768 }
1769 return KEYSPAN_BAUD_RATE_OK;
1770 }
1771
1772 /* USA-28 supports different maximum baud rates on each port */
1773 static int keyspan_usa28_calc_baud(u32 baud_rate, u32 baudclk, u8 *rate_hi,
1774 u8 *rate_low, u8 *prescaler, int portnum)
1775 {
1776 u32 b16, /* baud rate times 16 (actual rate used internally) */
1777 div, /* divisor */
1778 cnt; /* inverse of divisor (programmed into 8051) */
1779
1780 dbg("%s - %d.", __func__, baud_rate);
1781
1782 /* prevent divide by zero */
1783 b16 = baud_rate * 16L;
1784 if (b16 == 0)
1785 return KEYSPAN_INVALID_BAUD_RATE;
1786
1787 /* calculate the divisor and the counter (its inverse) */
1788 div = KEYSPAN_USA28_BAUDCLK / b16;
1789 if (div == 0)
1790 return KEYSPAN_INVALID_BAUD_RATE;
1791 else
1792 cnt = 0 - div;
1793
1794 /* check for out of range, based on portnum,
1795 and return result */
1796 if (portnum == 0) {
1797 if (div > 0xffff)
1798 return KEYSPAN_INVALID_BAUD_RATE;
1799 } else {
1800 if (portnum == 1) {
1801 if (div > 0xff)
1802 return KEYSPAN_INVALID_BAUD_RATE;
1803 } else
1804 return KEYSPAN_INVALID_BAUD_RATE;
1805 }
1806
1807 /* return the counter values if not NULL
1808 (port 1 will ignore retHi) */
1809 if (rate_low)
1810 *rate_low = (u8) (cnt & 0xff);
1811 if (rate_hi)
1812 *rate_hi = (u8) ((cnt >> 8) & 0xff);
1813 dbg("%s - %d OK.", __func__, baud_rate);
1814 return KEYSPAN_BAUD_RATE_OK;
1815 }
1816
1817 static int keyspan_usa26_send_setup(struct usb_serial *serial,
1818 struct usb_serial_port *port,
1819 int reset_port)
1820 {
1821 struct keyspan_usa26_portControlMessage msg;
1822 struct keyspan_serial_private *s_priv;
1823 struct keyspan_port_private *p_priv;
1824 const struct keyspan_device_details *d_details;
1825 int outcont_urb;
1826 struct urb *this_urb;
1827 int device_port, err;
1828
1829 dbg("%s reset=%d", __func__, reset_port);
1830
1831 s_priv = usb_get_serial_data(serial);
1832 p_priv = usb_get_serial_port_data(port);
1833 d_details = s_priv->device_details;
1834 device_port = port->number - port->serial->minor;
1835
1836 outcont_urb = d_details->outcont_endpoints[port->number];
1837 this_urb = p_priv->outcont_urb;
1838
1839 dbg("%s - endpoint %d", __func__, usb_pipeendpoint(this_urb->pipe));
1840
1841 /* Make sure we have an urb then send the message */
1842 if (this_urb == NULL) {
1843 dbg("%s - oops no urb.", __func__);
1844 return -1;
1845 }
1846
1847 /* Save reset port val for resend.
1848 Don't overwrite resend for open/close condition. */
1849 if ((reset_port + 1) > p_priv->resend_cont)
1850 p_priv->resend_cont = reset_port + 1;
1851 if (this_urb->status == -EINPROGRESS) {
1852 /* dbg("%s - already writing", __func__); */
1853 mdelay(5);
1854 return -1;
1855 }
1856
1857 memset(&msg, 0, sizeof(struct keyspan_usa26_portControlMessage));
1858
1859 /* Only set baud rate if it's changed */
1860 if (p_priv->old_baud != p_priv->baud) {
1861 p_priv->old_baud = p_priv->baud;
1862 msg.setClocking = 0xff;
1863 if (d_details->calculate_baud_rate
1864 (p_priv->baud, d_details->baudclk, &msg.baudHi,
1865 &msg.baudLo, &msg.prescaler, device_port) == KEYSPAN_INVALID_BAUD_RATE) {
1866 dbg("%s - Invalid baud rate %d requested, using 9600.",
1867 __func__, p_priv->baud);
1868 msg.baudLo = 0;
1869 msg.baudHi = 125; /* Values for 9600 baud */
1870 msg.prescaler = 10;
1871 }
1872 msg.setPrescaler = 0xff;
1873 }
1874
1875 msg.lcr = (p_priv->cflag & CSTOPB)? STOPBITS_678_2: STOPBITS_5678_1;
1876 switch (p_priv->cflag & CSIZE) {
1877 case CS5:
1878 msg.lcr |= USA_DATABITS_5;
1879 break;
1880 case CS6:
1881 msg.lcr |= USA_DATABITS_6;
1882 break;
1883 case CS7:
1884 msg.lcr |= USA_DATABITS_7;
1885 break;
1886 case CS8:
1887 msg.lcr |= USA_DATABITS_8;
1888 break;
1889 }
1890 if (p_priv->cflag & PARENB) {
1891 /* note USA_PARITY_NONE == 0 */
1892 msg.lcr |= (p_priv->cflag & PARODD)?
1893 USA_PARITY_ODD : USA_PARITY_EVEN;
1894 }
1895 msg.setLcr = 0xff;
1896
1897 msg.ctsFlowControl = (p_priv->flow_control == flow_cts);
1898 msg.xonFlowControl = 0;
1899 msg.setFlowControl = 0xff;
1900 msg.forwardingLength = 16;
1901 msg.xonChar = 17;
1902 msg.xoffChar = 19;
1903
1904 /* Opening port */
1905 if (reset_port == 1) {
1906 msg._txOn = 1;
1907 msg._txOff = 0;
1908 msg.txFlush = 0;
1909 msg.txBreak = 0;
1910 msg.rxOn = 1;
1911 msg.rxOff = 0;
1912 msg.rxFlush = 1;
1913 msg.rxForward = 0;
1914 msg.returnStatus = 0;
1915 msg.resetDataToggle = 0xff;
1916 }
1917
1918 /* Closing port */
1919 else if (reset_port == 2) {
1920 msg._txOn = 0;
1921 msg._txOff = 1;
1922 msg.txFlush = 0;
1923 msg.txBreak = 0;
1924 msg.rxOn = 0;
1925 msg.rxOff = 1;
1926 msg.rxFlush = 1;
1927 msg.rxForward = 0;
1928 msg.returnStatus = 0;
1929 msg.resetDataToggle = 0;
1930 }
1931
1932 /* Sending intermediate configs */
1933 else {
1934 msg._txOn = (!p_priv->break_on);
1935 msg._txOff = 0;
1936 msg.txFlush = 0;
1937 msg.txBreak = (p_priv->break_on);
1938 msg.rxOn = 0;
1939 msg.rxOff = 0;
1940 msg.rxFlush = 0;
1941 msg.rxForward = 0;
1942 msg.returnStatus = 0;
1943 msg.resetDataToggle = 0x0;
1944 }
1945
1946 /* Do handshaking outputs */
1947 msg.setTxTriState_setRts = 0xff;
1948 msg.txTriState_rts = p_priv->rts_state;
1949
1950 msg.setHskoa_setDtr = 0xff;
1951 msg.hskoa_dtr = p_priv->dtr_state;
1952
1953 p_priv->resend_cont = 0;
1954 memcpy(this_urb->transfer_buffer, &msg, sizeof(msg));
1955
1956 /* send the data out the device on control endpoint */
1957 this_urb->transfer_buffer_length = sizeof(msg);
1958
1959 this_urb->dev = serial->dev;
1960 err = usb_submit_urb(this_urb, GFP_ATOMIC);
1961 if (err != 0)
1962 dbg("%s - usb_submit_urb(setup) failed (%d)", __func__, err);
1963 #if 0
1964 else {
1965 dbg("%s - usb_submit_urb(%d) OK %d bytes (end %d)", __func__
1966 outcont_urb, this_urb->transfer_buffer_length,
1967 usb_pipeendpoint(this_urb->pipe));
1968 }
1969 #endif
1970
1971 return 0;
1972 }
1973
1974 static int keyspan_usa28_send_setup(struct usb_serial *serial,
1975 struct usb_serial_port *port,
1976 int reset_port)
1977 {
1978 struct keyspan_usa28_portControlMessage msg;
1979 struct keyspan_serial_private *s_priv;
1980 struct keyspan_port_private *p_priv;
1981 const struct keyspan_device_details *d_details;
1982 struct urb *this_urb;
1983 int device_port, err;
1984
1985 dbg("%s", __func__);
1986
1987 s_priv = usb_get_serial_data(serial);
1988 p_priv = usb_get_serial_port_data(port);
1989 d_details = s_priv->device_details;
1990 device_port = port->number - port->serial->minor;
1991
1992 /* only do something if we have a bulk out endpoint */
1993 this_urb = p_priv->outcont_urb;
1994 if (this_urb == NULL) {
1995 dbg("%s - oops no urb.", __func__);
1996 return -1;
1997 }
1998
1999 /* Save reset port val for resend.
2000 Don't overwrite resend for open/close condition. */
2001 if ((reset_port + 1) > p_priv->resend_cont)
2002 p_priv->resend_cont = reset_port + 1;
2003 if (this_urb->status == -EINPROGRESS) {
2004 dbg("%s already writing", __func__);
2005 mdelay(5);
2006 return -1;
2007 }
2008
2009 memset(&msg, 0, sizeof(struct keyspan_usa28_portControlMessage));
2010
2011 msg.setBaudRate = 1;
2012 if (d_details->calculate_baud_rate(p_priv->baud, d_details->baudclk,
2013 &msg.baudHi, &msg.baudLo, NULL, device_port) == KEYSPAN_INVALID_BAUD_RATE) {
2014 dbg("%s - Invalid baud rate requested %d.",
2015 __func__, p_priv->baud);
2016 msg.baudLo = 0xff;
2017 msg.baudHi = 0xb2; /* Values for 9600 baud */
2018 }
2019
2020 /* If parity is enabled, we must calculate it ourselves. */
2021 msg.parity = 0; /* XXX for now */
2022
2023 msg.ctsFlowControl = (p_priv->flow_control == flow_cts);
2024 msg.xonFlowControl = 0;
2025
2026 /* Do handshaking outputs, DTR is inverted relative to RTS */
2027 msg.rts = p_priv->rts_state;
2028 msg.dtr = p_priv->dtr_state;
2029
2030 msg.forwardingLength = 16;
2031 msg.forwardMs = 10;
2032 msg.breakThreshold = 45;
2033 msg.xonChar = 17;
2034 msg.xoffChar = 19;
2035
2036 /*msg.returnStatus = 1;
2037 msg.resetDataToggle = 0xff;*/
2038 /* Opening port */
2039 if (reset_port == 1) {
2040 msg._txOn = 1;
2041 msg._txOff = 0;
2042 msg.txFlush = 0;
2043 msg.txForceXoff = 0;
2044 msg.txBreak = 0;
2045 msg.rxOn = 1;
2046 msg.rxOff = 0;
2047 msg.rxFlush = 1;
2048 msg.rxForward = 0;
2049 msg.returnStatus = 0;
2050 msg.resetDataToggle = 0xff;
2051 }
2052 /* Closing port */
2053 else if (reset_port == 2) {
2054 msg._txOn = 0;
2055 msg._txOff = 1;
2056 msg.txFlush = 0;
2057 msg.txForceXoff = 0;
2058 msg.txBreak = 0;
2059 msg.rxOn = 0;
2060 msg.rxOff = 1;
2061 msg.rxFlush = 1;
2062 msg.rxForward = 0;
2063 msg.returnStatus = 0;
2064 msg.resetDataToggle = 0;
2065 }
2066 /* Sending intermediate configs */
2067 else {
2068 msg._txOn = (!p_priv->break_on);
2069 msg._txOff = 0;
2070 msg.txFlush = 0;
2071 msg.txForceXoff = 0;
2072 msg.txBreak = (p_priv->break_on);
2073 msg.rxOn = 0;
2074 msg.rxOff = 0;
2075 msg.rxFlush = 0;
2076 msg.rxForward = 0;
2077 msg.returnStatus = 0;
2078 msg.resetDataToggle = 0x0;
2079 }
2080
2081 p_priv->resend_cont = 0;
2082 memcpy(this_urb->transfer_buffer, &msg, sizeof(msg));
2083
2084 /* send the data out the device on control endpoint */
2085 this_urb->transfer_buffer_length = sizeof(msg);
2086
2087 this_urb->dev = serial->dev;
2088 err = usb_submit_urb(this_urb, GFP_ATOMIC);
2089 if (err != 0)
2090 dbg("%s - usb_submit_urb(setup) failed", __func__);
2091 #if 0
2092 else {
2093 dbg("%s - usb_submit_urb(setup) OK %d bytes", __func__,
2094 this_urb->transfer_buffer_length);
2095 }
2096 #endif
2097
2098 return 0;
2099 }
2100
2101 static int keyspan_usa49_send_setup(struct usb_serial *serial,
2102 struct usb_serial_port *port,
2103 int reset_port)
2104 {
2105 struct keyspan_usa49_portControlMessage msg;
2106 struct usb_ctrlrequest *dr = NULL;
2107 struct keyspan_serial_private *s_priv;
2108 struct keyspan_port_private *p_priv;
2109 const struct keyspan_device_details *d_details;
2110 struct urb *this_urb;
2111 int err, device_port;
2112
2113 dbg("%s", __func__);
2114
2115 s_priv = usb_get_serial_data(serial);
2116 p_priv = usb_get_serial_port_data(port);
2117 d_details = s_priv->device_details;
2118
2119 this_urb = s_priv->glocont_urb;
2120
2121 /* Work out which port within the device is being setup */
2122 device_port = port->number - port->serial->minor;
2123
2124 dbg("%s - endpoint %d port %d (%d)",
2125 __func__, usb_pipeendpoint(this_urb->pipe),
2126 port->number, device_port);
2127
2128 /* Make sure we have an urb then send the message */
2129 if (this_urb == NULL) {
2130 dbg("%s - oops no urb for port %d.", __func__, port->number);
2131 return -1;
2132 }
2133
2134 /* Save reset port val for resend.
2135 Don't overwrite resend for open/close condition. */
2136 if ((reset_port + 1) > p_priv->resend_cont)
2137 p_priv->resend_cont = reset_port + 1;
2138
2139 if (this_urb->status == -EINPROGRESS) {
2140 /* dbg("%s - already writing", __func__); */
2141 mdelay(5);
2142 return -1;
2143 }
2144
2145 memset(&msg, 0, sizeof(struct keyspan_usa49_portControlMessage));
2146
2147 /*msg.portNumber = port->number;*/
2148 msg.portNumber = device_port;
2149
2150 /* Only set baud rate if it's changed */
2151 if (p_priv->old_baud != p_priv->baud) {
2152 p_priv->old_baud = p_priv->baud;
2153 msg.setClocking = 0xff;
2154 if (d_details->calculate_baud_rate
2155 (p_priv->baud, d_details->baudclk, &msg.baudHi,
2156 &msg.baudLo, &msg.prescaler, device_port) == KEYSPAN_INVALID_BAUD_RATE) {
2157 dbg("%s - Invalid baud rate %d requested, using 9600.",
2158 __func__, p_priv->baud);
2159 msg.baudLo = 0;
2160 msg.baudHi = 125; /* Values for 9600 baud */
2161 msg.prescaler = 10;
2162 }
2163 /* msg.setPrescaler = 0xff; */
2164 }
2165
2166 msg.lcr = (p_priv->cflag & CSTOPB)? STOPBITS_678_2: STOPBITS_5678_1;
2167 switch (p_priv->cflag & CSIZE) {
2168 case CS5:
2169 msg.lcr |= USA_DATABITS_5;
2170 break;
2171 case CS6:
2172 msg.lcr |= USA_DATABITS_6;
2173 break;
2174 case CS7:
2175 msg.lcr |= USA_DATABITS_7;
2176 break;
2177 case CS8:
2178 msg.lcr |= USA_DATABITS_8;
2179 break;
2180 }
2181 if (p_priv->cflag & PARENB) {
2182 /* note USA_PARITY_NONE == 0 */
2183 msg.lcr |= (p_priv->cflag & PARODD)?
2184 USA_PARITY_ODD : USA_PARITY_EVEN;
2185 }
2186 msg.setLcr = 0xff;
2187
2188 msg.ctsFlowControl = (p_priv->flow_control == flow_cts);
2189 msg.xonFlowControl = 0;
2190 msg.setFlowControl = 0xff;
2191
2192 msg.forwardingLength = 16;
2193 msg.xonChar = 17;
2194 msg.xoffChar = 19;
2195
2196 /* Opening port */
2197 if (reset_port == 1) {
2198 msg._txOn = 1;
2199 msg._txOff = 0;
2200 msg.txFlush = 0;
2201 msg.txBreak = 0;
2202 msg.rxOn = 1;
2203 msg.rxOff = 0;
2204 msg.rxFlush = 1;
2205 msg.rxForward = 0;
2206 msg.returnStatus = 0;
2207 msg.resetDataToggle = 0xff;
2208 msg.enablePort = 1;
2209 msg.disablePort = 0;
2210 }
2211 /* Closing port */
2212 else if (reset_port == 2) {
2213 msg._txOn = 0;
2214 msg._txOff = 1;
2215 msg.txFlush = 0;
2216 msg.txBreak = 0;
2217 msg.rxOn = 0;
2218 msg.rxOff = 1;
2219 msg.rxFlush = 1;
2220 msg.rxForward = 0;
2221 msg.returnStatus = 0;
2222 msg.resetDataToggle = 0;
2223 msg.enablePort = 0;
2224 msg.disablePort = 1;
2225 }
2226 /* Sending intermediate configs */
2227 else {
2228 msg._txOn = (!p_priv->break_on);
2229 msg._txOff = 0;
2230 msg.txFlush = 0;
2231 msg.txBreak = (p_priv->break_on);
2232 msg.rxOn = 0;
2233 msg.rxOff = 0;
2234 msg.rxFlush = 0;
2235 msg.rxForward = 0;
2236 msg.returnStatus = 0;
2237 msg.resetDataToggle = 0x0;
2238 msg.enablePort = 0;
2239 msg.disablePort = 0;
2240 }
2241
2242 /* Do handshaking outputs */
2243 msg.setRts = 0xff;
2244 msg.rts = p_priv->rts_state;
2245
2246 msg.setDtr = 0xff;
2247 msg.dtr = p_priv->dtr_state;
2248
2249 p_priv->resend_cont = 0;
2250
2251 /* if the device is a 49wg, we send control message on usb
2252 control EP 0 */
2253
2254 if (d_details->product_id == keyspan_usa49wg_product_id) {
2255 dr = (void *)(s_priv->ctrl_buf);
2256 dr->bRequestType = USB_TYPE_VENDOR | USB_DIR_OUT;
2257 dr->bRequest = 0xB0; /* 49wg control message */;
2258 dr->wValue = 0;
2259 dr->wIndex = 0;
2260 dr->wLength = cpu_to_le16(sizeof(msg));
2261
2262 memcpy(s_priv->glocont_buf, &msg, sizeof(msg));
2263
2264 usb_fill_control_urb(this_urb, serial->dev,
2265 usb_sndctrlpipe(serial->dev, 0),
2266 (unsigned char *)dr, s_priv->glocont_buf,
2267 sizeof(msg), usa49_glocont_callback, serial);
2268
2269 } else {
2270 memcpy(this_urb->transfer_buffer, &msg, sizeof(msg));
2271
2272 /* send the data out the device on control endpoint */
2273 this_urb->transfer_buffer_length = sizeof(msg);
2274
2275 this_urb->dev = serial->dev;
2276 }
2277 err = usb_submit_urb(this_urb, GFP_ATOMIC);
2278 if (err != 0)
2279 dbg("%s - usb_submit_urb(setup) failed (%d)", __func__, err);
2280 #if 0
2281 else {
2282 dbg("%s - usb_submit_urb(%d) OK %d bytes (end %d)", __func__,
2283 outcont_urb, this_urb->transfer_buffer_length,
2284 usb_pipeendpoint(this_urb->pipe));
2285 }
2286 #endif
2287
2288 return 0;
2289 }
2290
2291 static int keyspan_usa90_send_setup(struct usb_serial *serial,
2292 struct usb_serial_port *port,
2293 int reset_port)
2294 {
2295 struct keyspan_usa90_portControlMessage msg;
2296 struct keyspan_serial_private *s_priv;
2297 struct keyspan_port_private *p_priv;
2298 const struct keyspan_device_details *d_details;
2299 struct urb *this_urb;
2300 int err;
2301 u8 prescaler;
2302
2303 dbg("%s", __func__);
2304
2305 s_priv = usb_get_serial_data(serial);
2306 p_priv = usb_get_serial_port_data(port);
2307 d_details = s_priv->device_details;
2308
2309 /* only do something if we have a bulk out endpoint */
2310 this_urb = p_priv->outcont_urb;
2311 if (this_urb == NULL) {
2312 dbg("%s - oops no urb.", __func__);
2313 return -1;
2314 }
2315
2316 /* Save reset port val for resend.
2317 Don't overwrite resend for open/close condition. */
2318 if ((reset_port + 1) > p_priv->resend_cont)
2319 p_priv->resend_cont = reset_port + 1;
2320 if (this_urb->status == -EINPROGRESS) {
2321 dbg("%s already writing", __func__);
2322 mdelay(5);
2323 return -1;
2324 }
2325
2326 memset(&msg, 0, sizeof(struct keyspan_usa90_portControlMessage));
2327
2328 /* Only set baud rate if it's changed */
2329 if (p_priv->old_baud != p_priv->baud) {
2330 p_priv->old_baud = p_priv->baud;
2331 msg.setClocking = 0x01;
2332 if (d_details->calculate_baud_rate
2333 (p_priv->baud, d_details->baudclk, &msg.baudHi,
2334 &msg.baudLo, &prescaler, 0) == KEYSPAN_INVALID_BAUD_RATE) {
2335 dbg("%s - Invalid baud rate %d requested, using 9600.",
2336 __func__, p_priv->baud);
2337 p_priv->baud = 9600;
2338 d_details->calculate_baud_rate(p_priv->baud, d_details->baudclk,
2339 &msg.baudHi, &msg.baudLo, &prescaler, 0);
2340 }
2341 msg.setRxMode = 1;
2342 msg.setTxMode = 1;
2343 }
2344
2345 /* modes must always be correctly specified */
2346 if (p_priv->baud > 57600) {
2347 msg.rxMode = RXMODE_DMA;
2348 msg.txMode = TXMODE_DMA;
2349 } else {
2350 msg.rxMode = RXMODE_BYHAND;
2351 msg.txMode = TXMODE_BYHAND;
2352 }
2353
2354 msg.lcr = (p_priv->cflag & CSTOPB)? STOPBITS_678_2: STOPBITS_5678_1;
2355 switch (p_priv->cflag & CSIZE) {
2356 case CS5:
2357 msg.lcr |= USA_DATABITS_5;
2358 break;
2359 case CS6:
2360 msg.lcr |= USA_DATABITS_6;
2361 break;
2362 case CS7:
2363 msg.lcr |= USA_DATABITS_7;
2364 break;
2365 case CS8:
2366 msg.lcr |= USA_DATABITS_8;
2367 break;
2368 }
2369 if (p_priv->cflag & PARENB) {
2370 /* note USA_PARITY_NONE == 0 */
2371 msg.lcr |= (p_priv->cflag & PARODD)?
2372 USA_PARITY_ODD : USA_PARITY_EVEN;
2373 }
2374 if (p_priv->old_cflag != p_priv->cflag) {
2375 p_priv->old_cflag = p_priv->cflag;
2376 msg.setLcr = 0x01;
2377 }
2378
2379 if (p_priv->flow_control == flow_cts)
2380 msg.txFlowControl = TXFLOW_CTS;
2381 msg.setTxFlowControl = 0x01;
2382 msg.setRxFlowControl = 0x01;
2383
2384 msg.rxForwardingLength = 16;
2385 msg.rxForwardingTimeout = 16;
2386 msg.txAckSetting = 0;
2387 msg.xonChar = 17;
2388 msg.xoffChar = 19;
2389
2390 /* Opening port */
2391 if (reset_port == 1) {
2392 msg.portEnabled = 1;
2393 msg.rxFlush = 1;
2394 msg.txBreak = (p_priv->break_on);
2395 }
2396 /* Closing port */
2397 else if (reset_port == 2)
2398 msg.portEnabled = 0;
2399 /* Sending intermediate configs */
2400 else {
2401 msg.portEnabled = 1;
2402 msg.txBreak = (p_priv->break_on);
2403 }
2404
2405 /* Do handshaking outputs */
2406 msg.setRts = 0x01;
2407 msg.rts = p_priv->rts_state;
2408
2409 msg.setDtr = 0x01;
2410 msg.dtr = p_priv->dtr_state;
2411
2412 p_priv->resend_cont = 0;
2413 memcpy(this_urb->transfer_buffer, &msg, sizeof(msg));
2414
2415 /* send the data out the device on control endpoint */
2416 this_urb->transfer_buffer_length = sizeof(msg);
2417
2418 this_urb->dev = serial->dev;
2419 err = usb_submit_urb(this_urb, GFP_ATOMIC);
2420 if (err != 0)
2421 dbg("%s - usb_submit_urb(setup) failed (%d)", __func__, err);
2422 return 0;
2423 }
2424
2425 static int keyspan_usa67_send_setup(struct usb_serial *serial,
2426 struct usb_serial_port *port,
2427 int reset_port)
2428 {
2429 struct keyspan_usa67_portControlMessage msg;
2430 struct keyspan_serial_private *s_priv;
2431 struct keyspan_port_private *p_priv;
2432 const struct keyspan_device_details *d_details;
2433 struct urb *this_urb;
2434 int err, device_port;
2435
2436 dbg("%s", __func__);
2437
2438 s_priv = usb_get_serial_data(serial);
2439 p_priv = usb_get_serial_port_data(port);
2440 d_details = s_priv->device_details;
2441
2442 this_urb = s_priv->glocont_urb;
2443
2444 /* Work out which port within the device is being setup */
2445 device_port = port->number - port->serial->minor;
2446
2447 /* Make sure we have an urb then send the message */
2448 if (this_urb == NULL) {
2449 dbg("%s - oops no urb for port %d.", __func__,
2450 port->number);
2451 return -1;
2452 }
2453
2454 /* Save reset port val for resend.
2455 Don't overwrite resend for open/close condition. */
2456 if ((reset_port + 1) > p_priv->resend_cont)
2457 p_priv->resend_cont = reset_port + 1;
2458 if (this_urb->status == -EINPROGRESS) {
2459 /* dbg("%s - already writing", __func__); */
2460 mdelay(5);
2461 return -1;
2462 }
2463
2464 memset(&msg, 0, sizeof(struct keyspan_usa67_portControlMessage));
2465
2466 msg.port = device_port;
2467
2468 /* Only set baud rate if it's changed */
2469 if (p_priv->old_baud != p_priv->baud) {
2470 p_priv->old_baud = p_priv->baud;
2471 msg.setClocking = 0xff;
2472 if (d_details->calculate_baud_rate
2473 (p_priv->baud, d_details->baudclk, &msg.baudHi,
2474 &msg.baudLo, &msg.prescaler, device_port) == KEYSPAN_INVALID_BAUD_RATE) {
2475 dbg("%s - Invalid baud rate %d requested, using 9600.",
2476 __func__, p_priv->baud);
2477 msg.baudLo = 0;
2478 msg.baudHi = 125; /* Values for 9600 baud */
2479 msg.prescaler = 10;
2480 }
2481 msg.setPrescaler = 0xff;
2482 }
2483
2484 msg.lcr = (p_priv->cflag & CSTOPB) ? STOPBITS_678_2 : STOPBITS_5678_1;
2485 switch (p_priv->cflag & CSIZE) {
2486 case CS5:
2487 msg.lcr |= USA_DATABITS_5;
2488 break;
2489 case CS6:
2490 msg.lcr |= USA_DATABITS_6;
2491 break;
2492 case CS7:
2493 msg.lcr |= USA_DATABITS_7;
2494 break;
2495 case CS8:
2496 msg.lcr |= USA_DATABITS_8;
2497 break;
2498 }
2499 if (p_priv->cflag & PARENB) {
2500 /* note USA_PARITY_NONE == 0 */
2501 msg.lcr |= (p_priv->cflag & PARODD)?
2502 USA_PARITY_ODD : USA_PARITY_EVEN;
2503 }
2504 msg.setLcr = 0xff;
2505
2506 msg.ctsFlowControl = (p_priv->flow_control == flow_cts);
2507 msg.xonFlowControl = 0;
2508 msg.setFlowControl = 0xff;
2509 msg.forwardingLength = 16;
2510 msg.xonChar = 17;
2511 msg.xoffChar = 19;
2512
2513 if (reset_port == 1) {
2514 /* Opening port */
2515 msg._txOn = 1;
2516 msg._txOff = 0;
2517 msg.txFlush = 0;
2518 msg.txBreak = 0;
2519 msg.rxOn = 1;
2520 msg.rxOff = 0;
2521 msg.rxFlush = 1;
2522 msg.rxForward = 0;
2523 msg.returnStatus = 0;
2524 msg.resetDataToggle = 0xff;
2525 } else if (reset_port == 2) {
2526 /* Closing port */
2527 msg._txOn = 0;
2528 msg._txOff = 1;
2529 msg.txFlush = 0;
2530 msg.txBreak = 0;
2531 msg.rxOn = 0;
2532 msg.rxOff = 1;
2533 msg.rxFlush = 1;
2534 msg.rxForward = 0;
2535 msg.returnStatus = 0;
2536 msg.resetDataToggle = 0;
2537 } else {
2538 /* Sending intermediate configs */
2539 msg._txOn = (!p_priv->break_on);
2540 msg._txOff = 0;
2541 msg.txFlush = 0;
2542 msg.txBreak = (p_priv->break_on);
2543 msg.rxOn = 0;
2544 msg.rxOff = 0;
2545 msg.rxFlush = 0;
2546 msg.rxForward = 0;
2547 msg.returnStatus = 0;
2548 msg.resetDataToggle = 0x0;
2549 }
2550
2551 /* Do handshaking outputs */
2552 msg.setTxTriState_setRts = 0xff;
2553 msg.txTriState_rts = p_priv->rts_state;
2554
2555 msg.setHskoa_setDtr = 0xff;
2556 msg.hskoa_dtr = p_priv->dtr_state;
2557
2558 p_priv->resend_cont = 0;
2559
2560 memcpy(this_urb->transfer_buffer, &msg, sizeof(msg));
2561
2562 /* send the data out the device on control endpoint */
2563 this_urb->transfer_buffer_length = sizeof(msg);
2564 this_urb->dev = serial->dev;
2565
2566 err = usb_submit_urb(this_urb, GFP_ATOMIC);
2567 if (err != 0)
2568 dbg("%s - usb_submit_urb(setup) failed (%d)", __func__,
2569 err);
2570 return 0;
2571 }
2572
2573 static void keyspan_send_setup(struct usb_serial_port *port, int reset_port)
2574 {
2575 struct usb_serial *serial = port->serial;
2576 struct keyspan_serial_private *s_priv;
2577 const struct keyspan_device_details *d_details;
2578
2579 dbg("%s", __func__);
2580
2581 s_priv = usb_get_serial_data(serial);
2582 d_details = s_priv->device_details;
2583
2584 switch (d_details->msg_format) {
2585 case msg_usa26:
2586 keyspan_usa26_send_setup(serial, port, reset_port);
2587 break;
2588 case msg_usa28:
2589 keyspan_usa28_send_setup(serial, port, reset_port);
2590 break;
2591 case msg_usa49:
2592 keyspan_usa49_send_setup(serial, port, reset_port);
2593 break;
2594 case msg_usa90:
2595 keyspan_usa90_send_setup(serial, port, reset_port);
2596 break;
2597 case msg_usa67:
2598 keyspan_usa67_send_setup(serial, port, reset_port);
2599 break;
2600 }
2601 }
2602
2603
2604 /* Gets called by the "real" driver (ie once firmware is loaded
2605 and renumeration has taken place. */
2606 static int keyspan_startup(struct usb_serial *serial)
2607 {
2608 int i, err;
2609 struct usb_serial_port *port;
2610 struct keyspan_serial_private *s_priv;
2611 struct keyspan_port_private *p_priv;
2612 const struct keyspan_device_details *d_details;
2613
2614 dbg("%s", __func__);
2615
2616 for (i = 0; (d_details = keyspan_devices[i]) != NULL; ++i)
2617 if (d_details->product_id ==
2618 le16_to_cpu(serial->dev->descriptor.idProduct))
2619 break;
2620 if (d_details == NULL) {
2621 dev_err(&serial->dev->dev, "%s - unknown product id %x\n",
2622 __func__, le16_to_cpu(serial->dev->descriptor.idProduct));
2623 return 1;
2624 }
2625
2626 /* Setup private data for serial driver */
2627 s_priv = kzalloc(sizeof(struct keyspan_serial_private), GFP_KERNEL);
2628 if (!s_priv) {
2629 dbg("%s - kmalloc for keyspan_serial_private failed.",
2630 __func__);
2631 return -ENOMEM;
2632 }
2633
2634 s_priv->device_details = d_details;
2635 usb_set_serial_data(serial, s_priv);
2636
2637 /* Now setup per port private data */
2638 for (i = 0; i < serial->num_ports; i++) {
2639 port = serial->port[i];
2640 p_priv = kzalloc(sizeof(struct keyspan_port_private),
2641 GFP_KERNEL);
2642 if (!p_priv) {
2643 dbg("%s - kmalloc for keyspan_port_private (%d) failed!.", __func__, i);
2644 return 1;
2645 }
2646 p_priv->device_details = d_details;
2647 usb_set_serial_port_data(port, p_priv);
2648 }
2649
2650 keyspan_setup_urbs(serial);
2651
2652 if (s_priv->instat_urb != NULL) {
2653 s_priv->instat_urb->dev = serial->dev;
2654 err = usb_submit_urb(s_priv->instat_urb, GFP_KERNEL);
2655 if (err != 0)
2656 dbg("%s - submit instat urb failed %d", __func__,
2657 err);
2658 }
2659 if (s_priv->indat_urb != NULL) {
2660 s_priv->indat_urb->dev = serial->dev;
2661 err = usb_submit_urb(s_priv->indat_urb, GFP_KERNEL);
2662 if (err != 0)
2663 dbg("%s - submit indat urb failed %d", __func__,
2664 err);
2665 }
2666
2667 return 0;
2668 }
2669
2670 static void keyspan_disconnect(struct usb_serial *serial)
2671 {
2672 int i, j;
2673 struct usb_serial_port *port;
2674 struct keyspan_serial_private *s_priv;
2675 struct keyspan_port_private *p_priv;
2676
2677 dbg("%s", __func__);
2678
2679 s_priv = usb_get_serial_data(serial);
2680
2681 /* Stop reading/writing urbs */
2682 stop_urb(s_priv->instat_urb);
2683 stop_urb(s_priv->glocont_urb);
2684 stop_urb(s_priv->indat_urb);
2685 for (i = 0; i < serial->num_ports; ++i) {
2686 port = serial->port[i];
2687 p_priv = usb_get_serial_port_data(port);
2688 stop_urb(p_priv->inack_urb);
2689 stop_urb(p_priv->outcont_urb);
2690 for (j = 0; j < 2; j++) {
2691 stop_urb(p_priv->in_urbs[j]);
2692 stop_urb(p_priv->out_urbs[j]);
2693 }
2694 }
2695
2696 /* Now free them */
2697 usb_free_urb(s_priv->instat_urb);
2698 usb_free_urb(s_priv->indat_urb);
2699 usb_free_urb(s_priv->glocont_urb);
2700 for (i = 0; i < serial->num_ports; ++i) {
2701 port = serial->port[i];
2702 p_priv = usb_get_serial_port_data(port);
2703 usb_free_urb(p_priv->inack_urb);
2704 usb_free_urb(p_priv->outcont_urb);
2705 for (j = 0; j < 2; j++) {
2706 usb_free_urb(p_priv->in_urbs[j]);
2707 usb_free_urb(p_priv->out_urbs[j]);
2708 }
2709 }
2710 }
2711
2712 static void keyspan_release(struct usb_serial *serial)
2713 {
2714 int i;
2715 struct usb_serial_port *port;
2716 struct keyspan_serial_private *s_priv;
2717
2718 dbg("%s", __func__);
2719
2720 s_priv = usb_get_serial_data(serial);
2721
2722 /* dbg("Freeing serial->private."); */
2723 kfree(s_priv);
2724
2725 /* dbg("Freeing port->private."); */
2726 /* Now free per port private data */
2727 for (i = 0; i < serial->num_ports; i++) {
2728 port = serial->port[i];
2729 kfree(usb_get_serial_port_data(port));
2730 }
2731 }
2732
2733 MODULE_AUTHOR(DRIVER_AUTHOR);
2734 MODULE_DESCRIPTION(DRIVER_DESC);
2735 MODULE_LICENSE("GPL");
2736
2737 MODULE_FIRMWARE("keyspan/usa28.fw");
2738 MODULE_FIRMWARE("keyspan/usa28x.fw");
2739 MODULE_FIRMWARE("keyspan/usa28xa.fw");
2740 MODULE_FIRMWARE("keyspan/usa28xb.fw");
2741 MODULE_FIRMWARE("keyspan/usa19.fw");
2742 MODULE_FIRMWARE("keyspan/usa19qi.fw");
2743 MODULE_FIRMWARE("keyspan/mpr.fw");
2744 MODULE_FIRMWARE("keyspan/usa19qw.fw");
2745 MODULE_FIRMWARE("keyspan/usa18x.fw");
2746 MODULE_FIRMWARE("keyspan/usa19w.fw");
2747 MODULE_FIRMWARE("keyspan/usa49w.fw");
2748 MODULE_FIRMWARE("keyspan/usa49wlc.fw");
2749
2750 module_param(debug, bool, S_IRUGO | S_IWUSR);
2751 MODULE_PARM_DESC(debug, "Debug enabled or not");
2752
Linux kernel - Deliverables
This page took 0.276598 seconds and 5 git commands to generate.