drivers/usb/serial/oti6858.c

   1 /*
   2  * Ours Technology Inc. OTi-6858 USB to serial adapter driver.
   3  *
   4  * Copyleft  (C) 2007 Kees Lemmens (adapted for kernel 2.6.20)
   5  * Copyright (C) 2006 Tomasz Michal Lukaszewski (FIXME: add e-mail)
   6  * Copyright (C) 2001-2004 Greg Kroah-Hartman (greg@kroah.com)
   7  * Copyright (C) 2003 IBM Corp.
   8  *
   9  * Many thanks to the authors of pl2303 driver: all functions in this file
  10  * are heavily based on pl2303 code, buffering code is a 1-to-1 copy.
  11  *
  12  * Warning! You use this driver on your own risk! The only official
  13  * description of this device I have is datasheet from manufacturer,
  14  * and it doesn't contain almost any information needed to write a driver.
  15  * Almost all knowlegde used while writing this driver was gathered by:
  16  *  - analyzing traffic between device and the M$ Windows 2000 driver,
  17  *  - trying different bit combinations and checking pin states
  18  *    with a voltmeter,
  19  *  - receiving malformed frames and producing buffer overflows
  20  *    to learn how errors are reported,
  21  * So, THIS CODE CAN DESTROY OTi-6858 AND ANY OTHER DEVICES, THAT ARE
  22  * CONNECTED TO IT!
  23  *
  24  * This program is free software; you can redistribute it and/or modify
  25  * it under the terms of the GNU General Public License as published by
  26  * the Free Software Foundation; either version 2 of the License.
  27  *
  28  * See Documentation/usb/usb-serial.txt for more information on using this
  29  * driver
  30  *
  31  * TODO:
  32  *  - implement correct flushing for ioctls and oti6858_close()
  33  *  - check how errors (rx overflow, parity error, framing error) are reported
  34  *  - implement oti6858_break_ctl()
  35  *  - implement more ioctls
  36  *  - test/implement flow control
  37  *  - allow setting custom baud rates
  38  */
  39
  40 #include <linux/kernel.h>
  41 #include <linux/errno.h>
  42 #include <linux/init.h>
  43 #include <linux/slab.h>
  44 #include <linux/tty.h>
  45 #include <linux/tty_driver.h>
  46 #include <linux/tty_flip.h>
  47 #include <linux/serial.h>
  48 #include <linux/module.h>
  49 #include <linux/moduleparam.h>
  50 #include <linux/spinlock.h>
  51 #include <linux/usb.h>
  52 #include <linux/usb/serial.h>
  53 #include <linux/uaccess.h>
  54 #include <linux/kfifo.h>
  55 #include "oti6858.h"
  56
  57 #define OTI6858_DESCRIPTION \
  58         "Ours Technology Inc. OTi-6858 USB to serial adapter driver"
  59 #define OTI6858_AUTHOR "Tomasz Michal Lukaszewski <FIXME@FIXME>"
  60 #define OTI6858_VERSION "0.2"
  61
  62 static const struct usb_device_id id_table[] = {
  63         { USB_DEVICE(OTI6858_VENDOR_ID, OTI6858_PRODUCT_ID) },
  64         { }
  65 };
  66
  67 MODULE_DEVICE_TABLE(usb, id_table);
  68
  69 static bool debug;
  70
  71 /* requests */
  72 #define OTI6858_REQ_GET_STATUS          (USB_DIR_IN | USB_TYPE_VENDOR | 0x00)
  73 #define OTI6858_REQ_T_GET_STATUS        0x01
  74
  75 #define OTI6858_REQ_SET_LINE            (USB_DIR_OUT | USB_TYPE_VENDOR | 0x00)
  76 #define OTI6858_REQ_T_SET_LINE          0x00
  77
  78 #define OTI6858_REQ_CHECK_TXBUFF        (USB_DIR_IN | USB_TYPE_VENDOR | 0x01)
  79 #define OTI6858_REQ_T_CHECK_TXBUFF      0x00
  80
  81 /* format of the control packet */
  82 struct oti6858_control_pkt {
  83         __le16  divisor;        /* baud rate = 96000000 / (16 * divisor), LE */
  84 #define OTI6858_MAX_BAUD_RATE   3000000
  85         u8      frame_fmt;
  86 #define FMT_STOP_BITS_MASK      0xc0
  87 #define FMT_STOP_BITS_1         0x00
  88 #define FMT_STOP_BITS_2         0x40    /* 1.5 stop bits if FMT_DATA_BITS_5 */
  89 #define FMT_PARITY_MASK         0x38
  90 #define FMT_PARITY_NONE         0x00
  91 #define FMT_PARITY_ODD          0x08
  92 #define FMT_PARITY_EVEN         0x18
  93 #define FMT_PARITY_MARK         0x28
  94 #define FMT_PARITY_SPACE        0x38
  95 #define FMT_DATA_BITS_MASK      0x03
  96 #define FMT_DATA_BITS_5         0x00
  97 #define FMT_DATA_BITS_6         0x01
  98 #define FMT_DATA_BITS_7         0x02
  99 #define FMT_DATA_BITS_8         0x03
 100         u8      something;      /* always equals 0x43 */
 101         u8      control;        /* settings of flow control lines */
 102 #define CONTROL_MASK            0x0c
 103 #define CONTROL_DTR_HIGH        0x08
 104 #define CONTROL_RTS_HIGH        0x04
 105         u8      tx_status;
 106 #define TX_BUFFER_EMPTIED       0x09
 107         u8      pin_state;
 108 #define PIN_MASK                0x3f
 109 #define PIN_RTS                 0x20    /* output pin */
 110 #define PIN_CTS                 0x10    /* input pin, active low */
 111 #define PIN_DSR                 0x08    /* input pin, active low */
 112 #define PIN_DTR                 0x04    /* output pin */
 113 #define PIN_RI                  0x02    /* input pin, active low */
 114 #define PIN_DCD                 0x01    /* input pin, active low */
 115         u8      rx_bytes_avail;         /* number of bytes in rx buffer */;
 116 };
 117
 118 #define OTI6858_CTRL_PKT_SIZE   sizeof(struct oti6858_control_pkt)
 119 #define OTI6858_CTRL_EQUALS_PENDING(a, priv) \
 120         (((a)->divisor == (priv)->pending_setup.divisor) \
 121           && ((a)->control == (priv)->pending_setup.control) \
 122           && ((a)->frame_fmt == (priv)->pending_setup.frame_fmt))
 123
 124 /* function prototypes */
 125 static int oti6858_open(struct tty_struct *tty, struct usb_serial_port *port);
 126 static void oti6858_close(struct usb_serial_port *port);
 127 static void oti6858_set_termios(struct tty_struct *tty,
 128                         struct usb_serial_port *port, struct ktermios *old);
 129 static void oti6858_init_termios(struct tty_struct *tty);
 130 static int oti6858_ioctl(struct tty_struct *tty,
 131                         unsigned int cmd, unsigned long arg);
 132 static void oti6858_read_int_callback(struct urb *urb);
 133 static void oti6858_read_bulk_callback(struct urb *urb);
 134 static void oti6858_write_bulk_callback(struct urb *urb);
 135 static int oti6858_write(struct tty_struct *tty, struct usb_serial_port *port,
 136                         const unsigned char *buf, int count);
 137 static int oti6858_write_room(struct tty_struct *tty);
 138 static int oti6858_chars_in_buffer(struct tty_struct *tty);
 139 static int oti6858_tiocmget(struct tty_struct *tty);
 140 static int oti6858_tiocmset(struct tty_struct *tty,
 141                                 unsigned int set, unsigned int clear);
 142 static int oti6858_startup(struct usb_serial *serial);
 143 static void oti6858_release(struct usb_serial *serial);
 144
 145 /* device info */
 146 static struct usb_serial_driver oti6858_device = {
 147         .driver = {
 148                 .owner =        THIS_MODULE,
 149                 .name =         "oti6858",
 150         },
 151         .id_table =             id_table,
 152         .num_ports =            1,
 153         .open =                 oti6858_open,
 154         .close =                oti6858_close,
 155         .write =                oti6858_write,
 156         .ioctl =                oti6858_ioctl,
 157         .set_termios =          oti6858_set_termios,
 158         .init_termios =         oti6858_init_termios,
 159         .tiocmget =             oti6858_tiocmget,
 160         .tiocmset =             oti6858_tiocmset,
 161         .read_bulk_callback =   oti6858_read_bulk_callback,
 162         .read_int_callback =    oti6858_read_int_callback,
 163         .write_bulk_callback =  oti6858_write_bulk_callback,
 164         .write_room =           oti6858_write_room,
 165         .chars_in_buffer =      oti6858_chars_in_buffer,
 166         .attach =               oti6858_startup,
 167         .release =              oti6858_release,
 168 };
 169
 170 static struct usb_serial_driver * const serial_drivers[] = {
 171         &oti6858_device, NULL
 172 };
 173
 174 struct oti6858_private {
 175         spinlock_t lock;
 176
 177         struct oti6858_control_pkt status;
 178
 179         struct {
 180                 u8 read_urb_in_use;
 181                 u8 write_urb_in_use;
 182         } flags;
 183         struct delayed_work delayed_write_work;
 184
 185         struct {
 186                 __le16 divisor;
 187                 u8 frame_fmt;
 188                 u8 control;
 189         } pending_setup;
 190         u8 transient;
 191         u8 setup_done;
 192         struct delayed_work delayed_setup_work;
 193
 194         wait_queue_head_t intr_wait;
 195         struct usb_serial_port *port;   /* USB port with which associated */
 196 };
 197
 198 static void setup_line(struct work_struct *work)
 199 {
 200         struct oti6858_private *priv = container_of(work,
 201                         struct oti6858_private, delayed_setup_work.work);
 202         struct usb_serial_port *port = priv->port;
 203         struct oti6858_control_pkt *new_setup;
 204         unsigned long flags;
 205         int result;
 206
 207         new_setup = kmalloc(OTI6858_CTRL_PKT_SIZE, GFP_KERNEL);
 208         if (new_setup == NULL) {
 209                 dev_err(&port->dev, "%s(): out of memory!\n", __func__);
 210                 /* we will try again */
 211                 schedule_delayed_work(&priv->delayed_setup_work,
 212                                                 msecs_to_jiffies(2));
 213                 return;
 214         }
 215
 216         result = usb_control_msg(port->serial->dev,
 217                                 usb_rcvctrlpipe(port->serial->dev, 0),
 218                                 OTI6858_REQ_T_GET_STATUS,
 219                                 OTI6858_REQ_GET_STATUS,
 220                                 0, 0,
 221                                 new_setup, OTI6858_CTRL_PKT_SIZE,
 222                                 100);
 223
 224         if (result != OTI6858_CTRL_PKT_SIZE) {
 225                 dev_err(&port->dev, "%s(): error reading status\n", __func__);
 226                 kfree(new_setup);
 227                 /* we will try again */
 228                 schedule_delayed_work(&priv->delayed_setup_work,
 229                                                         msecs_to_jiffies(2));
 230                 return;
 231         }
 232
 233         spin_lock_irqsave(&priv->lock, flags);
 234         if (!OTI6858_CTRL_EQUALS_PENDING(new_setup, priv)) {
 235                 new_setup->divisor = priv->pending_setup.divisor;
 236                 new_setup->control = priv->pending_setup.control;
 237                 new_setup->frame_fmt = priv->pending_setup.frame_fmt;
 238
 239                 spin_unlock_irqrestore(&priv->lock, flags);
 240                 result = usb_control_msg(port->serial->dev,
 241                                         usb_sndctrlpipe(port->serial->dev, 0),
 242                                         OTI6858_REQ_T_SET_LINE,
 243                                         OTI6858_REQ_SET_LINE,
 244                                         0, 0,
 245                                         new_setup, OTI6858_CTRL_PKT_SIZE,
 246                                         100);
 247         } else {
 248                 spin_unlock_irqrestore(&priv->lock, flags);
 249                 result = 0;
 250         }
 251         kfree(new_setup);
 252
 253         spin_lock_irqsave(&priv->lock, flags);
 254         if (result != OTI6858_CTRL_PKT_SIZE)
 255                 priv->transient = 0;
 256         priv->setup_done = 1;
 257         spin_unlock_irqrestore(&priv->lock, flags);
 258
 259         dbg("%s(): submitting interrupt urb", __func__);
 260         result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
 261         if (result != 0) {
 262                 dev_err(&port->dev, "%s(): usb_submit_urb() failed"
 263                                 " with error %d\n", __func__, result);
 264         }
 265 }
 266
 267 static void send_data(struct work_struct *work)
 268 {
 269         struct oti6858_private *priv = container_of(work,
 270                         struct oti6858_private, delayed_write_work.work);
 271         struct usb_serial_port *port = priv->port;
 272         int count = 0, result;
 273         unsigned long flags;
 274         u8 *allow;
 275
 276         spin_lock_irqsave(&priv->lock, flags);
 277         if (priv->flags.write_urb_in_use) {
 278                 spin_unlock_irqrestore(&priv->lock, flags);
 279                 schedule_delayed_work(&priv->delayed_write_work,
 280                                                 msecs_to_jiffies(2));
 281                 return;
 282         }
 283         priv->flags.write_urb_in_use = 1;
 284         spin_unlock_irqrestore(&priv->lock, flags);
 285
 286         spin_lock_irqsave(&port->lock, flags);
 287         count = kfifo_len(&port->write_fifo);
 288         spin_unlock_irqrestore(&port->lock, flags);
 289
 290         if (count > port->bulk_out_size)
 291                 count = port->bulk_out_size;
 292
 293         if (count != 0) {
 294                 allow = kmalloc(1, GFP_KERNEL);
 295                 if (!allow) {
 296                         dev_err_console(port, "%s(): kmalloc failed\n",
 297                                         __func__);
 298                         return;
 299                 }
 300                 result = usb_control_msg(port->serial->dev,
 301                                 usb_rcvctrlpipe(port->serial->dev, 0),
 302                                 OTI6858_REQ_T_CHECK_TXBUFF,
 303                                 OTI6858_REQ_CHECK_TXBUFF,
 304                                 count, 0, allow, 1, 100);
 305                 if (result != 1 || *allow != 0)
 306                         count = 0;
 307                 kfree(allow);
 308         }
 309
 310         if (count == 0) {
 311                 priv->flags.write_urb_in_use = 0;
 312
 313                 dbg("%s(): submitting interrupt urb", __func__);
 314                 result = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO);
 315                 if (result != 0) {
 316                         dev_err(&port->dev, "%s(): usb_submit_urb() failed"
 317                                 " with error %d\n", __func__, result);
 318                 }
 319                 return;
 320         }
 321
 322         count = kfifo_out_locked(&port->write_fifo,
 323                                         port->write_urb->transfer_buffer,
 324                                         count, &port->lock);
 325         port->write_urb->transfer_buffer_length = count;
 326         result = usb_submit_urb(port->write_urb, GFP_NOIO);
 327         if (result != 0) {
 328                 dev_err_console(port, "%s(): usb_submit_urb() failed"
 329                                " with error %d\n", __func__, result);
 330                 priv->flags.write_urb_in_use = 0;
 331         }
 332
 333         usb_serial_port_softint(port);
 334 }
 335
 336 static int oti6858_startup(struct usb_serial *serial)
 337 {
 338         struct usb_serial_port *port = serial->port[0];
 339         struct oti6858_private *priv;
 340         int i;
 341
 342         for (i = 0; i < serial->num_ports; ++i) {
 343                 priv = kzalloc(sizeof(struct oti6858_private), GFP_KERNEL);
 344                 if (!priv)
 345                         break;
 346
 347                 spin_lock_init(&priv->lock);
 348                 init_waitqueue_head(&priv->intr_wait);
 349 /*              INIT_WORK(&priv->setup_work, setup_line, serial->port[i]); */
 350 /*              INIT_WORK(&priv->write_work, send_data, serial->port[i]); */
 351                 priv->port = port;
 352                 INIT_DELAYED_WORK(&priv->delayed_setup_work, setup_line);
 353                 INIT_DELAYED_WORK(&priv->delayed_write_work, send_data);
 354
 355                 usb_set_serial_port_data(serial->port[i], priv);
 356         }
 357         if (i == serial->num_ports)
 358                 return 0;
 359
 360         for (--i; i >= 0; --i) {
 361                 priv = usb_get_serial_port_data(serial->port[i]);
 362                 kfree(priv);
 363                 usb_set_serial_port_data(serial->port[i], NULL);
 364         }
 365         return -ENOMEM;
 366 }
 367
 368 static int oti6858_write(struct tty_struct *tty, struct usb_serial_port *port,
 369                         const unsigned char *buf, int count)
 370 {
 371         if (!count)
 372                 return count;
 373
 374         count = kfifo_in_locked(&port->write_fifo, buf, count, &port->lock);
 375
 376         return count;
 377 }
 378
 379 static int oti6858_write_room(struct tty_struct *tty)
 380 {
 381         struct usb_serial_port *port = tty->driver_data;
 382         int room = 0;
 383         unsigned long flags;
 384
 385         spin_lock_irqsave(&port->lock, flags);
 386         room = kfifo_avail(&port->write_fifo);
 387         spin_unlock_irqrestore(&port->lock, flags);
 388
 389         return room;
 390 }
 391
 392 static int oti6858_chars_in_buffer(struct tty_struct *tty)
 393 {
 394         struct usb_serial_port *port = tty->driver_data;
 395         int chars = 0;
 396         unsigned long flags;
 397
 398         spin_lock_irqsave(&port->lock, flags);
 399         chars = kfifo_len(&port->write_fifo);
 400         spin_unlock_irqrestore(&port->lock, flags);
 401
 402         return chars;
 403 }
 404
 405 static void oti6858_init_termios(struct tty_struct *tty)
 406 {
 407         tty->termios = tty_std_termios;
 408         tty->termios.c_cflag = B38400 | CS8 | CREAD | HUPCL | CLOCAL;
 409         tty->termios.c_ispeed = 38400;
 410         tty->termios.c_ospeed = 38400;
 411 }
 412
 413 static void oti6858_set_termios(struct tty_struct *tty,
 414                 struct usb_serial_port *port, struct ktermios *old_termios)
 415 {
 416         struct oti6858_private *priv = usb_get_serial_port_data(port);
 417         unsigned long flags;
 418         unsigned int cflag;
 419         u8 frame_fmt, control;
 420         __le16 divisor;
 421         int br;
 422
 423         if (!tty) {
 424                 dbg("%s(): no tty structures", __func__);
 425                 return;
 426         }
 427
 428         cflag = tty->termios.c_cflag;
 429
 430         spin_lock_irqsave(&priv->lock, flags);
 431         divisor = priv->pending_setup.divisor;
 432         frame_fmt = priv->pending_setup.frame_fmt;
 433         control = priv->pending_setup.control;
 434         spin_unlock_irqrestore(&priv->lock, flags);
 435
 436         frame_fmt &= ~FMT_DATA_BITS_MASK;
 437         switch (cflag & CSIZE) {
 438         case CS5:
 439                 frame_fmt |= FMT_DATA_BITS_5;
 440                 break;
 441         case CS6:
 442                 frame_fmt |= FMT_DATA_BITS_6;
 443                 break;
 444         case CS7:
 445                 frame_fmt |= FMT_DATA_BITS_7;
 446                 break;
 447         default:
 448         case CS8:
 449                 frame_fmt |= FMT_DATA_BITS_8;
 450                 break;
 451         }
 452
 453         /* manufacturer claims that this device can work with baud rates
 454          * up to 3 Mbps; I've tested it only on 115200 bps, so I can't
 455          * guarantee that any other baud rate will work (especially
 456          * the higher ones)
 457          */
 458         br = tty_get_baud_rate(tty);
 459         if (br == 0) {
 460                 divisor = 0;
 461         } else {
 462                 int real_br;
 463                 int new_divisor;
 464                 br = min(br, OTI6858_MAX_BAUD_RATE);
 465
 466                 new_divisor = (96000000 + 8 * br) / (16 * br);
 467                 real_br = 96000000 / (16 * new_divisor);
 468                 divisor = cpu_to_le16(new_divisor);
 469                 tty_encode_baud_rate(tty, real_br, real_br);
 470         }
 471
 472         frame_fmt &= ~FMT_STOP_BITS_MASK;
 473         if ((cflag & CSTOPB) != 0)
 474                 frame_fmt |= FMT_STOP_BITS_2;
 475         else
 476                 frame_fmt |= FMT_STOP_BITS_1;
 477
 478         frame_fmt &= ~FMT_PARITY_MASK;
 479         if ((cflag & PARENB) != 0) {
 480                 if ((cflag & PARODD) != 0)
 481                         frame_fmt |= FMT_PARITY_ODD;
 482                 else
 483                         frame_fmt |= FMT_PARITY_EVEN;
 484         } else {
 485                 frame_fmt |= FMT_PARITY_NONE;
 486         }
 487
 488         control &= ~CONTROL_MASK;
 489         if ((cflag & CRTSCTS) != 0)
 490                 control |= (CONTROL_DTR_HIGH | CONTROL_RTS_HIGH);
 491
 492         /* change control lines if we are switching to or from B0 */
 493         /* FIXME:
 494         spin_lock_irqsave(&priv->lock, flags);
 495         control = priv->line_control;
 496         if ((cflag & CBAUD) == B0)
 497                 priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
 498         else
 499                 priv->line_control |= (CONTROL_DTR | CONTROL_RTS);
 500         if (control != priv->line_control) {
 501                 control = priv->line_control;
 502                 spin_unlock_irqrestore(&priv->lock, flags);
 503                 set_control_lines(serial->dev, control);
 504         } else {
 505                 spin_unlock_irqrestore(&priv->lock, flags);
 506         }
 507         */
 508
 509         spin_lock_irqsave(&priv->lock, flags);
 510         if (divisor != priv->pending_setup.divisor
 511                         || control != priv->pending_setup.control
 512                         || frame_fmt != priv->pending_setup.frame_fmt) {
 513                 priv->pending_setup.divisor = divisor;
 514                 priv->pending_setup.control = control;
 515                 priv->pending_setup.frame_fmt = frame_fmt;
 516         }
 517         spin_unlock_irqrestore(&priv->lock, flags);
 518 }
 519
 520 static int oti6858_open(struct tty_struct *tty, struct usb_serial_port *port)
 521 {
 522         struct oti6858_private *priv = usb_get_serial_port_data(port);
 523         struct ktermios tmp_termios;
 524         struct usb_serial *serial = port->serial;
 525         struct oti6858_control_pkt *buf;
 526         unsigned long flags;
 527         int result;
 528
 529         usb_clear_halt(serial->dev, port->write_urb->pipe);
 530         usb_clear_halt(serial->dev, port->read_urb->pipe);
 531
 532         buf = kmalloc(OTI6858_CTRL_PKT_SIZE, GFP_KERNEL);
 533         if (buf == NULL) {
 534                 dev_err(&port->dev, "%s(): out of memory!\n", __func__);
 535                 return -ENOMEM;
 536         }
 537
 538         result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
 539                                 OTI6858_REQ_T_GET_STATUS,
 540                                 OTI6858_REQ_GET_STATUS,
 541                                 0, 0,
 542                                 buf, OTI6858_CTRL_PKT_SIZE,
 543                                 100);
 544         if (result != OTI6858_CTRL_PKT_SIZE) {
 545                 /* assume default (after power-on reset) values */
 546                 buf->divisor = cpu_to_le16(0x009c);     /* 38400 bps */
 547                 buf->frame_fmt = 0x03;  /* 8N1 */
 548                 buf->something = 0x43;
 549                 buf->control = 0x4c;    /* DTR, RTS */
 550                 buf->tx_status = 0x00;
 551                 buf->pin_state = 0x5b;  /* RTS, CTS, DSR, DTR, RI, DCD */
 552                 buf->rx_bytes_avail = 0x00;
 553         }
 554
 555         spin_lock_irqsave(&priv->lock, flags);
 556         memcpy(&priv->status, buf, OTI6858_CTRL_PKT_SIZE);
 557         priv->pending_setup.divisor = buf->divisor;
 558         priv->pending_setup.frame_fmt = buf->frame_fmt;
 559         priv->pending_setup.control = buf->control;
 560         spin_unlock_irqrestore(&priv->lock, flags);
 561         kfree(buf);
 562
 563         dbg("%s(): submitting interrupt urb", __func__);
 564         result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
 565         if (result != 0) {
 566                 dev_err(&port->dev, "%s(): usb_submit_urb() failed"
 567                                " with error %d\n", __func__, result);
 568                 oti6858_close(port);
 569                 return result;
 570         }
 571
 572         /* setup termios */
 573         if (tty)
 574                 oti6858_set_termios(tty, port, &tmp_termios);
 575         port->port.drain_delay = 256;   /* FIXME: check the FIFO length */
 576         return 0;
 577 }
 578
 579 static void oti6858_close(struct usb_serial_port *port)
 580 {
 581         struct oti6858_private *priv = usb_get_serial_port_data(port);
 582         unsigned long flags;
 583
 584         spin_lock_irqsave(&port->lock, flags);
 585         /* clear out any remaining data in the buffer */
 586         kfifo_reset_out(&port->write_fifo);
 587         spin_unlock_irqrestore(&port->lock, flags);
 588
 589         dbg("%s(): after buf_clear()", __func__);
 590
 591         /* cancel scheduled setup */
 592         cancel_delayed_work_sync(&priv->delayed_setup_work);
 593         cancel_delayed_work_sync(&priv->delayed_write_work);
 594
 595         /* shutdown our urbs */
 596         dbg("%s(): shutting down urbs", __func__);
 597         usb_kill_urb(port->write_urb);
 598         usb_kill_urb(port->read_urb);
 599         usb_kill_urb(port->interrupt_in_urb);
 600 }
 601
 602 static int oti6858_tiocmset(struct tty_struct *tty,
 603                                 unsigned int set, unsigned int clear)
 604 {
 605         struct usb_serial_port *port = tty->driver_data;
 606         struct oti6858_private *priv = usb_get_serial_port_data(port);
 607         unsigned long flags;
 608         u8 control;
 609
 610         dbg("%s(port = %d, set = 0x%08x, clear = 0x%08x)",
 611                                 __func__, port->number, set, clear);
 612
 613         /* FIXME: check if this is correct (active high/low) */
 614         spin_lock_irqsave(&priv->lock, flags);
 615         control = priv->pending_setup.control;
 616         if ((set & TIOCM_RTS) != 0)
 617                 control |= CONTROL_RTS_HIGH;
 618         if ((set & TIOCM_DTR) != 0)
 619                 control |= CONTROL_DTR_HIGH;
 620         if ((clear & TIOCM_RTS) != 0)
 621                 control &= ~CONTROL_RTS_HIGH;
 622         if ((clear & TIOCM_DTR) != 0)
 623                 control &= ~CONTROL_DTR_HIGH;
 624
 625         if (control != priv->pending_setup.control)
 626                 priv->pending_setup.control = control;
 627
 628         spin_unlock_irqrestore(&priv->lock, flags);
 629         return 0;
 630 }
 631
 632 static int oti6858_tiocmget(struct tty_struct *tty)
 633 {
 634         struct usb_serial_port *port = tty->driver_data;
 635         struct oti6858_private *priv = usb_get_serial_port_data(port);
 636         unsigned long flags;
 637         unsigned pin_state;
 638         unsigned result = 0;
 639
 640         spin_lock_irqsave(&priv->lock, flags);
 641         pin_state = priv->status.pin_state & PIN_MASK;
 642         spin_unlock_irqrestore(&priv->lock, flags);
 643
 644         /* FIXME: check if this is correct (active high/low) */
 645         if ((pin_state & PIN_RTS) != 0)
 646                 result |= TIOCM_RTS;
 647         if ((pin_state & PIN_CTS) != 0)
 648                 result |= TIOCM_CTS;
 649         if ((pin_state & PIN_DSR) != 0)
 650                 result |= TIOCM_DSR;
 651         if ((pin_state & PIN_DTR) != 0)
 652                 result |= TIOCM_DTR;
 653         if ((pin_state & PIN_RI) != 0)
 654                 result |= TIOCM_RI;
 655         if ((pin_state & PIN_DCD) != 0)
 656                 result |= TIOCM_CD;
 657
 658         dbg("%s() = 0x%08x", __func__, result);
 659
 660         return result;
 661 }
 662
 663 static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
 664 {
 665         struct oti6858_private *priv = usb_get_serial_port_data(port);
 666         unsigned long flags;
 667         unsigned int prev, status;
 668         unsigned int changed;
 669
 670         spin_lock_irqsave(&priv->lock, flags);
 671         prev = priv->status.pin_state;
 672         spin_unlock_irqrestore(&priv->lock, flags);
 673
 674         while (1) {
 675                 wait_event_interruptible(priv->intr_wait,
 676                                         priv->status.pin_state != prev);
 677                 if (signal_pending(current))
 678                         return -ERESTARTSYS;
 679
 680                 spin_lock_irqsave(&priv->lock, flags);
 681                 status = priv->status.pin_state & PIN_MASK;
 682                 spin_unlock_irqrestore(&priv->lock, flags);
 683
 684                 changed = prev ^ status;
 685                 /* FIXME: check if this is correct (active high/low) */
 686                 if (((arg & TIOCM_RNG) && (changed & PIN_RI)) ||
 687                     ((arg & TIOCM_DSR) && (changed & PIN_DSR)) ||
 688                     ((arg & TIOCM_CD)  && (changed & PIN_DCD)) ||
 689                     ((arg & TIOCM_CTS) && (changed & PIN_CTS)))
 690                         return 0;
 691                 prev = status;
 692         }
 693
 694         /* NOTREACHED */
 695         return 0;
 696 }
 697
 698 static int oti6858_ioctl(struct tty_struct *tty,
 699                         unsigned int cmd, unsigned long arg)
 700 {
 701         struct usb_serial_port *port = tty->driver_data;
 702
 703         dbg("%s(port = %d, cmd = 0x%04x, arg = 0x%08lx)",
 704                                 __func__, port->number, cmd, arg);
 705
 706         switch (cmd) {
 707         case TIOCMIWAIT:
 708                 dbg("%s(): TIOCMIWAIT", __func__);
 709                 return wait_modem_info(port, arg);
 710         default:
 711                 dbg("%s(): 0x%04x not supported", __func__, cmd);
 712                 break;
 713         }
 714         return -ENOIOCTLCMD;
 715 }
 716
 717
 718 static void oti6858_release(struct usb_serial *serial)
 719 {
 720         int i;
 721
 722         for (i = 0; i < serial->num_ports; ++i)
 723                 kfree(usb_get_serial_port_data(serial->port[i]));
 724 }
 725
 726 static void oti6858_read_int_callback(struct urb *urb)
 727 {
 728         struct usb_serial_port *port =  urb->context;
 729         struct oti6858_private *priv = usb_get_serial_port_data(port);
 730         int transient = 0, can_recv = 0, resubmit = 1;
 731         int status = urb->status;
 732
 733         switch (status) {
 734         case 0:
 735                 /* success */
 736                 break;
 737         case -ECONNRESET:
 738         case -ENOENT:
 739         case -ESHUTDOWN:
 740                 /* this urb is terminated, clean up */
 741                 dbg("%s(): urb shutting down with status: %d",
 742                                         __func__, status);
 743                 return;
 744         default:
 745                 dbg("%s(): nonzero urb status received: %d",
 746                                         __func__, status);
 747                 break;
 748         }
 749
 750         if (status == 0 && urb->actual_length == OTI6858_CTRL_PKT_SIZE) {
 751                 struct oti6858_control_pkt *xs = urb->transfer_buffer;
 752                 unsigned long flags;
 753
 754                 spin_lock_irqsave(&priv->lock, flags);
 755
 756                 if (!priv->transient) {
 757                         if (!OTI6858_CTRL_EQUALS_PENDING(xs, priv)) {
 758                                 if (xs->rx_bytes_avail == 0) {
 759                                         priv->transient = 4;
 760                                         priv->setup_done = 0;
 761                                         resubmit = 0;
 762                                         dbg("%s(): scheduling setup_line()",
 763                                             __func__);
 764                                         schedule_delayed_work(&priv->delayed_setup_work, 0);
 765                                 }
 766                         }
 767                 } else {
 768                         if (OTI6858_CTRL_EQUALS_PENDING(xs, priv)) {
 769                                 priv->transient = 0;
 770                         } else if (!priv->setup_done) {
 771                                 resubmit = 0;
 772                         } else if (--priv->transient == 0) {
 773                                 if (xs->rx_bytes_avail == 0) {
 774                                         priv->transient = 4;
 775                                         priv->setup_done = 0;
 776                                         resubmit = 0;
 777                                         dbg("%s(): scheduling setup_line()",
 778                                             __func__);
 779                                         schedule_delayed_work(&priv->delayed_setup_work, 0);
 780                                 }
 781                         }
 782                 }
 783
 784                 if (!priv->transient) {
 785                         if (xs->pin_state != priv->status.pin_state)
 786                                 wake_up_interruptible(&priv->intr_wait);
 787                         memcpy(&priv->status, xs, OTI6858_CTRL_PKT_SIZE);
 788                 }
 789
 790                 if (!priv->transient && xs->rx_bytes_avail != 0) {
 791                         can_recv = xs->rx_bytes_avail;
 792                         priv->flags.read_urb_in_use = 1;
 793                 }
 794
 795                 transient = priv->transient;
 796                 spin_unlock_irqrestore(&priv->lock, flags);
 797         }
 798
 799         if (can_recv) {
 800                 int result;
 801
 802                 result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
 803                 if (result != 0) {
 804                         priv->flags.read_urb_in_use = 0;
 805                         dev_err(&port->dev, "%s(): usb_submit_urb() failed,"
 806                                         " error %d\n", __func__, result);
 807                 } else {
 808                         resubmit = 0;
 809                 }
 810         } else if (!transient) {
 811                 unsigned long flags;
 812                 int count;
 813
 814                 spin_lock_irqsave(&port->lock, flags);
 815                 count = kfifo_len(&port->write_fifo);
 816                 spin_unlock_irqrestore(&port->lock, flags);
 817
 818                 spin_lock_irqsave(&priv->lock, flags);
 819                 if (priv->flags.write_urb_in_use == 0 && count != 0) {
 820                         schedule_delayed_work(&priv->delayed_write_work, 0);
 821                         resubmit = 0;
 822                 }
 823                 spin_unlock_irqrestore(&priv->lock, flags);
 824         }
 825
 826         if (resubmit) {
 827                 int result;
 828
 829 /*              dbg("%s(): submitting interrupt urb", __func__); */
 830                 result = usb_submit_urb(urb, GFP_ATOMIC);
 831                 if (result != 0) {
 832                         dev_err(&urb->dev->dev,
 833                                         "%s(): usb_submit_urb() failed with"
 834                                         " error %d\n", __func__, result);
 835                 }
 836         }
 837 }
 838
 839 static void oti6858_read_bulk_callback(struct urb *urb)
 840 {
 841         struct usb_serial_port *port =  urb->context;
 842         struct oti6858_private *priv = usb_get_serial_port_data(port);
 843         struct tty_struct *tty;
 844         unsigned char *data = urb->transfer_buffer;
 845         unsigned long flags;
 846         int status = urb->status;
 847         int result;
 848
 849         spin_lock_irqsave(&priv->lock, flags);
 850         priv->flags.read_urb_in_use = 0;
 851         spin_unlock_irqrestore(&priv->lock, flags);
 852
 853         if (status != 0) {
 854                 dbg("%s(): unable to handle the error, exiting", __func__);
 855                 return;
 856         }
 857
 858         tty = tty_port_tty_get(&port->port);
 859         if (tty != NULL && urb->actual_length > 0) {
 860                 tty_insert_flip_string(tty, data, urb->actual_length);
 861                 tty_flip_buffer_push(tty);
 862         }
 863         tty_kref_put(tty);
 864
 865         /* schedule the interrupt urb */
 866         result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
 867         if (result != 0 && result != -EPERM) {
 868                 dev_err(&port->dev, "%s(): usb_submit_urb() failed,"
 869                                 " error %d\n", __func__, result);
 870         }
 871 }
 872
 873 static void oti6858_write_bulk_callback(struct urb *urb)
 874 {
 875         struct usb_serial_port *port =  urb->context;
 876         struct oti6858_private *priv = usb_get_serial_port_data(port);
 877         int status = urb->status;
 878         int result;
 879
 880         switch (status) {
 881         case 0:
 882                 /* success */
 883                 break;
 884         case -ECONNRESET:
 885         case -ENOENT:
 886         case -ESHUTDOWN:
 887                 /* this urb is terminated, clean up */
 888                 dbg("%s(): urb shutting down with status: %d",
 889                                         __func__, status);
 890                 priv->flags.write_urb_in_use = 0;
 891                 return;
 892         default:
 893                 /* error in the urb, so we have to resubmit it */
 894                 dbg("%s(): nonzero write bulk status received: %d",
 895                                         __func__, status);
 896                 dbg("%s(): overflow in write", __func__);
 897
 898                 port->write_urb->transfer_buffer_length = 1;
 899                 result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
 900                 if (result) {
 901                         dev_err_console(port, "%s(): usb_submit_urb() failed,"
 902                                         " error %d\n", __func__, result);
 903                 } else {
 904                         return;
 905                 }
 906         }
 907
 908         priv->flags.write_urb_in_use = 0;
 909
 910         /* schedule the interrupt urb if we are still open */
 911         dbg("%s(): submitting interrupt urb", __func__);
 912         result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
 913         if (result != 0) {
 914                 dev_err(&port->dev, "%s(): failed submitting int urb,"
 915                                         " error %d\n", __func__, result);
 916         }
 917 }
 918
 919 module_usb_serial_driver(serial_drivers, id_table);
 920
 921 MODULE_DESCRIPTION(OTI6858_DESCRIPTION);
 922 MODULE_AUTHOR(OTI6858_AUTHOR);
 923 MODULE_VERSION(OTI6858_VERSION);
 924 MODULE_LICENSE("GPL");
 925
 926 module_param(debug, bool, S_IRUGO | S_IWUSR);
 927 MODULE_PARM_DESC(debug, "enable debug output");
 928