2 * Prolific PL2303 USB to serial adaptor driver
4 * Copyright (C) 2001-2007 Greg Kroah-Hartman (greg@kroah.com)
5 * Copyright (C) 2003 IBM Corp.
7 * Copyright (C) 2009, 2013 Frank Schäfer <fschaefer.oss@googlemail.com>
8 * - fixes, improvements and documentation for the baud rate encoding methods
9 * Copyright (C) 2013 Reinhard Max <max@suse.de>
10 * - fixes and improvements for the divisor based baud rate encoding method
12 * Original driver for 2.2.x by anonymous
14 * This program is free software; you can redistribute it and/or
15 * modify it under the terms of the GNU General Public License version
16 * 2 as published by the Free Software Foundation.
18 * See Documentation/usb/usb-serial.txt for more information on using this
23 #include <linux/kernel.h>
24 #include <linux/errno.h>
25 #include <linux/init.h>
26 #include <linux/slab.h>
27 #include <linux/tty.h>
28 #include <linux/tty_driver.h>
29 #include <linux/tty_flip.h>
30 #include <linux/serial.h>
31 #include <linux/module.h>
32 #include <linux/moduleparam.h>
33 #include <linux/spinlock.h>
34 #include <linux/uaccess.h>
35 #include <linux/usb.h>
36 #include <linux/usb/serial.h>
37 #include <asm/unaligned.h>
43 #define DRIVER_DESC "Prolific PL2303 USB to serial adaptor driver"
45 static const struct usb_device_id id_table
[] = {
46 { USB_DEVICE(PL2303_VENDOR_ID
, PL2303_PRODUCT_ID
) },
47 { USB_DEVICE(PL2303_VENDOR_ID
, PL2303_PRODUCT_ID_RSAQ2
) },
48 { USB_DEVICE(PL2303_VENDOR_ID
, PL2303_PRODUCT_ID_DCU11
) },
49 { USB_DEVICE(PL2303_VENDOR_ID
, PL2303_PRODUCT_ID_RSAQ3
) },
50 { USB_DEVICE(PL2303_VENDOR_ID
, PL2303_PRODUCT_ID_PHAROS
) },
51 { USB_DEVICE(PL2303_VENDOR_ID
, PL2303_PRODUCT_ID_ALDIGA
) },
52 { USB_DEVICE(PL2303_VENDOR_ID
, PL2303_PRODUCT_ID_MMX
) },
53 { USB_DEVICE(PL2303_VENDOR_ID
, PL2303_PRODUCT_ID_GPRS
) },
54 { USB_DEVICE(PL2303_VENDOR_ID
, PL2303_PRODUCT_ID_HCR331
) },
55 { USB_DEVICE(PL2303_VENDOR_ID
, PL2303_PRODUCT_ID_MOTOROLA
) },
56 { USB_DEVICE(IODATA_VENDOR_ID
, IODATA_PRODUCT_ID
) },
57 { USB_DEVICE(IODATA_VENDOR_ID
, IODATA_PRODUCT_ID_RSAQ5
) },
58 { USB_DEVICE(ATEN_VENDOR_ID
, ATEN_PRODUCT_ID
) },
59 { USB_DEVICE(ATEN_VENDOR_ID2
, ATEN_PRODUCT_ID
) },
60 { USB_DEVICE(ELCOM_VENDOR_ID
, ELCOM_PRODUCT_ID
) },
61 { USB_DEVICE(ELCOM_VENDOR_ID
, ELCOM_PRODUCT_ID_UCSGT
) },
62 { USB_DEVICE(ITEGNO_VENDOR_ID
, ITEGNO_PRODUCT_ID
) },
63 { USB_DEVICE(ITEGNO_VENDOR_ID
, ITEGNO_PRODUCT_ID_2080
) },
64 { USB_DEVICE(MA620_VENDOR_ID
, MA620_PRODUCT_ID
) },
65 { USB_DEVICE(RATOC_VENDOR_ID
, RATOC_PRODUCT_ID
) },
66 { USB_DEVICE(TRIPP_VENDOR_ID
, TRIPP_PRODUCT_ID
) },
67 { USB_DEVICE(RADIOSHACK_VENDOR_ID
, RADIOSHACK_PRODUCT_ID
) },
68 { USB_DEVICE(DCU10_VENDOR_ID
, DCU10_PRODUCT_ID
) },
69 { USB_DEVICE(SITECOM_VENDOR_ID
, SITECOM_PRODUCT_ID
) },
70 { USB_DEVICE(ALCATEL_VENDOR_ID
, ALCATEL_PRODUCT_ID
) },
71 { USB_DEVICE(SAMSUNG_VENDOR_ID
, SAMSUNG_PRODUCT_ID
) },
72 { USB_DEVICE(SIEMENS_VENDOR_ID
, SIEMENS_PRODUCT_ID_SX1
) },
73 { USB_DEVICE(SIEMENS_VENDOR_ID
, SIEMENS_PRODUCT_ID_X65
) },
74 { USB_DEVICE(SIEMENS_VENDOR_ID
, SIEMENS_PRODUCT_ID_X75
) },
75 { USB_DEVICE(SIEMENS_VENDOR_ID
, SIEMENS_PRODUCT_ID_EF81
) },
76 { USB_DEVICE(BENQ_VENDOR_ID
, BENQ_PRODUCT_ID_S81
) }, /* Benq/Siemens S81 */
77 { USB_DEVICE(SYNTECH_VENDOR_ID
, SYNTECH_PRODUCT_ID
) },
78 { USB_DEVICE(NOKIA_CA42_VENDOR_ID
, NOKIA_CA42_PRODUCT_ID
) },
79 { USB_DEVICE(CA_42_CA42_VENDOR_ID
, CA_42_CA42_PRODUCT_ID
) },
80 { USB_DEVICE(SAGEM_VENDOR_ID
, SAGEM_PRODUCT_ID
) },
81 { USB_DEVICE(LEADTEK_VENDOR_ID
, LEADTEK_9531_PRODUCT_ID
) },
82 { USB_DEVICE(SPEEDDRAGON_VENDOR_ID
, SPEEDDRAGON_PRODUCT_ID
) },
83 { USB_DEVICE(DATAPILOT_U2_VENDOR_ID
, DATAPILOT_U2_PRODUCT_ID
) },
84 { USB_DEVICE(BELKIN_VENDOR_ID
, BELKIN_PRODUCT_ID
) },
85 { USB_DEVICE(ALCOR_VENDOR_ID
, ALCOR_PRODUCT_ID
) },
86 { USB_DEVICE(WS002IN_VENDOR_ID
, WS002IN_PRODUCT_ID
) },
87 { USB_DEVICE(COREGA_VENDOR_ID
, COREGA_PRODUCT_ID
) },
88 { USB_DEVICE(YCCABLE_VENDOR_ID
, YCCABLE_PRODUCT_ID
) },
89 { USB_DEVICE(SUPERIAL_VENDOR_ID
, SUPERIAL_PRODUCT_ID
) },
90 { USB_DEVICE(HP_VENDOR_ID
, HP_LD220_PRODUCT_ID
) },
91 { USB_DEVICE(CRESSI_VENDOR_ID
, CRESSI_EDY_PRODUCT_ID
) },
92 { USB_DEVICE(ZEAGLE_VENDOR_ID
, ZEAGLE_N2ITION3_PRODUCT_ID
) },
93 { USB_DEVICE(SONY_VENDOR_ID
, SONY_QN3USB_PRODUCT_ID
) },
94 { USB_DEVICE(SANWA_VENDOR_ID
, SANWA_PRODUCT_ID
) },
95 { USB_DEVICE(ADLINK_VENDOR_ID
, ADLINK_ND6530_PRODUCT_ID
) },
96 { USB_DEVICE(SMART_VENDOR_ID
, SMART_PRODUCT_ID
) },
97 { } /* Terminating entry */
100 MODULE_DEVICE_TABLE(usb
, id_table
);
102 #define SET_LINE_REQUEST_TYPE 0x21
103 #define SET_LINE_REQUEST 0x20
105 #define SET_CONTROL_REQUEST_TYPE 0x21
106 #define SET_CONTROL_REQUEST 0x22
107 #define CONTROL_DTR 0x01
108 #define CONTROL_RTS 0x02
110 #define BREAK_REQUEST_TYPE 0x21
111 #define BREAK_REQUEST 0x23
112 #define BREAK_ON 0xffff
113 #define BREAK_OFF 0x0000
115 #define GET_LINE_REQUEST_TYPE 0xa1
116 #define GET_LINE_REQUEST 0x21
118 #define VENDOR_WRITE_REQUEST_TYPE 0x40
119 #define VENDOR_WRITE_REQUEST 0x01
121 #define VENDOR_READ_REQUEST_TYPE 0xc0
122 #define VENDOR_READ_REQUEST 0x01
124 #define UART_STATE 0x08
125 #define UART_STATE_TRANSIENT_MASK 0x74
126 #define UART_DCD 0x01
127 #define UART_DSR 0x02
128 #define UART_BREAK_ERROR 0x04
129 #define UART_RING 0x08
130 #define UART_FRAME_ERROR 0x10
131 #define UART_PARITY_ERROR 0x20
132 #define UART_OVERRUN_ERROR 0x40
133 #define UART_CTS 0x80
137 type_0
, /* H version ? */
138 type_1
, /* H version ? */
139 HX_TA
, /* HX(A) / X(A) / TA version */ /* TODO: improve */
140 HXD_EA_RA_SA
, /* HXD / EA / RA / SA version */ /* TODO: improve */
144 * NOTE: don't know the difference between type 0 and type 1,
145 * until someone from Prolific tells us...
146 * TODO: distinguish between X/HX, TA and HXD, EA, RA, SA variants
149 struct pl2303_serial_private
{
150 enum pl2303_type type
;
153 struct pl2303_private
{
159 static int pl2303_vendor_read(__u16 value
, __u16 index
,
160 struct usb_serial
*serial
, unsigned char *buf
)
162 int res
= usb_control_msg(serial
->dev
, usb_rcvctrlpipe(serial
->dev
, 0),
163 VENDOR_READ_REQUEST
, VENDOR_READ_REQUEST_TYPE
,
164 value
, index
, buf
, 1, 100);
165 dev_dbg(&serial
->interface
->dev
, "0x%x:0x%x:0x%x:0x%x %d - %x\n",
166 VENDOR_READ_REQUEST_TYPE
, VENDOR_READ_REQUEST
, value
, index
,
171 static int pl2303_vendor_write(__u16 value
, __u16 index
,
172 struct usb_serial
*serial
)
174 int res
= usb_control_msg(serial
->dev
, usb_sndctrlpipe(serial
->dev
, 0),
175 VENDOR_WRITE_REQUEST
, VENDOR_WRITE_REQUEST_TYPE
,
176 value
, index
, NULL
, 0, 100);
177 dev_dbg(&serial
->interface
->dev
, "0x%x:0x%x:0x%x:0x%x %d\n",
178 VENDOR_WRITE_REQUEST_TYPE
, VENDOR_WRITE_REQUEST
, value
, index
,
183 static int pl2303_startup(struct usb_serial
*serial
)
185 struct pl2303_serial_private
*spriv
;
186 enum pl2303_type type
= type_0
;
187 char *type_str
= "unknown (treating as type_0)";
190 spriv
= kzalloc(sizeof(*spriv
), GFP_KERNEL
);
194 buf
= kmalloc(10, GFP_KERNEL
);
200 if (serial
->dev
->descriptor
.bDeviceClass
== 0x02) {
203 } else if (serial
->dev
->descriptor
.bMaxPacketSize0
== 0x40) {
205 * NOTE: The bcdDevice version is the only difference between
206 * the device descriptors of the X/HX, HXD, EA, RA, SA, TA, TB
208 if (le16_to_cpu(serial
->dev
->descriptor
.bcdDevice
) == 0x300) {
210 type_str
= "X/HX/TA";
211 } else if (le16_to_cpu(serial
->dev
->descriptor
.bcdDevice
)
214 type_str
= "HXD/EA/RA/SA";
215 } else if (le16_to_cpu(serial
->dev
->descriptor
.bcdDevice
)
220 dev_info(&serial
->interface
->dev
,
221 "unknown/unsupported device type\n");
226 } else if (serial
->dev
->descriptor
.bDeviceClass
== 0x00
227 || serial
->dev
->descriptor
.bDeviceClass
== 0xFF) {
231 dev_dbg(&serial
->interface
->dev
, "device type: %s\n", type_str
);
234 usb_set_serial_data(serial
, spriv
);
236 pl2303_vendor_read(0x8484, 0, serial
, buf
);
237 pl2303_vendor_write(0x0404, 0, serial
);
238 pl2303_vendor_read(0x8484, 0, serial
, buf
);
239 pl2303_vendor_read(0x8383, 0, serial
, buf
);
240 pl2303_vendor_read(0x8484, 0, serial
, buf
);
241 pl2303_vendor_write(0x0404, 1, serial
);
242 pl2303_vendor_read(0x8484, 0, serial
, buf
);
243 pl2303_vendor_read(0x8383, 0, serial
, buf
);
244 pl2303_vendor_write(0, 1, serial
);
245 pl2303_vendor_write(1, 0, serial
);
246 if (type
== type_0
|| type
== type_1
)
247 pl2303_vendor_write(2, 0x24, serial
);
249 pl2303_vendor_write(2, 0x44, serial
);
255 static void pl2303_release(struct usb_serial
*serial
)
257 struct pl2303_serial_private
*spriv
;
259 spriv
= usb_get_serial_data(serial
);
263 static int pl2303_port_probe(struct usb_serial_port
*port
)
265 struct pl2303_private
*priv
;
267 priv
= kzalloc(sizeof(*priv
), GFP_KERNEL
);
271 spin_lock_init(&priv
->lock
);
273 usb_set_serial_port_data(port
, priv
);
275 port
->port
.drain_delay
= 256;
280 static int pl2303_port_remove(struct usb_serial_port
*port
)
282 struct pl2303_private
*priv
;
284 priv
= usb_get_serial_port_data(port
);
290 static int pl2303_set_control_lines(struct usb_serial_port
*port
, u8 value
)
292 struct usb_device
*dev
= port
->serial
->dev
;
295 retval
= usb_control_msg(dev
, usb_sndctrlpipe(dev
, 0),
296 SET_CONTROL_REQUEST
, SET_CONTROL_REQUEST_TYPE
,
297 value
, 0, NULL
, 0, 100);
298 dev_dbg(&port
->dev
, "%s - value = %d, retval = %d\n", __func__
,
303 static int pl2303_baudrate_encode_direct(int baud
, enum pl2303_type type
,
307 * NOTE: Only the values defined in baud_sup are supported !
308 * => if unsupported values are set, the PL2303 seems to
309 * use 9600 baud (at least my PL2303X always does)
311 const int baud_sup
[] = { 75, 150, 300, 600, 1200, 1800, 2400, 3600,
312 4800, 7200, 9600, 14400, 19200, 28800, 38400,
313 57600, 115200, 230400, 460800, 614400, 921600,
314 1228800, 2457600, 3000000, 6000000, 12000000 };
316 * NOTE: With the exception of type_0/1 devices, the following
317 * additional baud rates are supported (tested with HX rev. 3A only):
318 * 110*, 56000*, 128000, 134400, 161280, 201600, 256000*, 268800,
319 * 403200, 806400. (*: not HX)
321 * Maximum values: HXD, TB: 12000000; HX, TA: 6000000;
322 * type_0+1: 1228800; RA: 921600; SA: 115200
324 * As long as we are not using this encoding method for anything else
325 * than the type_0+1 and HX chips, there is no point in complicating
326 * the code to support them.
330 /* Set baudrate to nearest supported value */
331 for (i
= 0; i
< ARRAY_SIZE(baud_sup
); ++i
) {
332 if (baud_sup
[i
] > baud
)
335 if (i
== ARRAY_SIZE(baud_sup
))
336 baud
= baud_sup
[i
- 1];
337 else if (i
> 0 && (baud_sup
[i
] - baud
) > (baud
- baud_sup
[i
- 1]))
338 baud
= baud_sup
[i
- 1];
341 /* Respect the chip type specific baud rate limits */
343 * FIXME: as long as we don't know how to distinguish between the
344 * HXD, EA, RA, and SA chip variants, allow the max. value of 12M.
347 baud
= min_t(int, baud
, 6000000);
348 else if (type
== type_0
|| type
== type_1
)
349 baud
= min_t(int, baud
, 1228800);
350 /* Direct (standard) baud rate encoding method */
351 put_unaligned_le32(baud
, buf
);
356 static int pl2303_baudrate_encode_divisor(int baud
, enum pl2303_type type
,
360 * Divisor based baud rate encoding method
362 * NOTE: it's not clear if the type_0/1 chips support this method
364 * divisor = 12MHz * 32 / baudrate = 2^A * B
369 * B = buf[0] + (buf[1] & 0x01) << 8
372 * => 8 < B < 16: device seems to work not properly
373 * => B <= 8: device uses the max. value B = 512 instead
378 * NOTE: The Windows driver allows maximum baud rates of 110% of the
379 * specified maximium value.
380 * Quick tests with early (2004) HX (rev. A) chips suggest, that even
381 * higher baud rates (up to the maximum of 24M baud !) are working fine,
382 * but that should really be tested carefully in "real life" scenarios
383 * before removing the upper limit completely.
384 * Baud rates smaller than the specified 75 baud are definitely working
387 if (type
== type_0
|| type
== type_1
)
388 baud
= min_t(int, baud
, 1228800 * 1.1);
389 else if (type
== HX_TA
)
390 baud
= min_t(int, baud
, 6000000 * 1.1);
391 else if (type
== HXD_EA_RA_SA
)
392 /* HXD, EA: 12Mbps; RA: 1Mbps; SA: 115200 bps */
394 * FIXME: as long as we don't know how to distinguish between
395 * these chip variants, allow the max. of these values
397 baud
= min_t(int, baud
, 12000000 * 1.1);
399 baud
= min_t(int, baud
, 12000000 * 1.1);
400 /* Determine factors A and B */
402 B
= 12000000 * 32 / baud
; /* 12MHz */
403 B
<<= 1; /* Add one bit for rounding */
404 while (B
> (512 << 1) && A
<= 14) {
408 if (A
> 14) { /* max. divisor = min. baudrate reached */
413 B
= (B
+ 1) >> 1; /* Round the last bit */
415 /* Handle special cases */
417 B
= 0; /* also: 1 to 8 */
420 * NOTE: With the current algorithm this happens
421 * only for A=0 and means that the min. divisor
422 * (respectively: the max. baudrate) is reached.
424 B
= 16; /* => 24 MBaud */
425 /* Encode the baud rate */
426 buf
[3] = 0x80; /* Select divisor encoding method */
428 buf
[1] = (A
& 0x0e); /* A */
429 buf
[1] |= ((B
& 0x100) >> 8); /* MSB of B */
430 buf
[0] = B
& 0xff; /* 8 LSBs of B */
431 /* Calculate the actual/resulting baud rate */
434 baud
= 12000000 * 32 / ((1 << A
) * B
);
439 static void pl2303_encode_baudrate(struct tty_struct
*tty
,
440 struct usb_serial_port
*port
,
441 enum pl2303_type type
,
446 baud
= tty_get_baud_rate(tty
);
447 dev_dbg(&port
->dev
, "baud requested = %d\n", baud
);
451 * There are two methods for setting/encoding the baud rate
452 * 1) Direct method: encodes the baud rate value directly
453 * => supported by all chip types
454 * 2) Divisor based method: encodes a divisor to a base value (12MHz*32)
455 * => supported by HX chips (and likely not by type_0/1 chips)
457 * NOTE: Although the divisor based baud rate encoding method is much
458 * more flexible, some of the standard baud rate values can not be
459 * realized exactly. But the difference is very small (max. 0.2%) and
460 * the device likely uses the same baud rate generator for both methods
461 * so that there is likley no difference.
463 if (type
== type_0
|| type
== type_1
)
464 baud
= pl2303_baudrate_encode_direct(baud
, type
, buf
);
466 baud
= pl2303_baudrate_encode_divisor(baud
, type
, buf
);
467 /* Save resulting baud rate */
468 tty_encode_baud_rate(tty
, baud
, baud
);
469 dev_dbg(&port
->dev
, "baud set = %d\n", baud
);
472 static void pl2303_set_termios(struct tty_struct
*tty
,
473 struct usb_serial_port
*port
, struct ktermios
*old_termios
)
475 struct usb_serial
*serial
= port
->serial
;
476 struct pl2303_serial_private
*spriv
= usb_get_serial_data(serial
);
477 struct pl2303_private
*priv
= usb_get_serial_port_data(port
);
484 * The PL2303 is reported to lose bytes if you change serial settings
485 * even to the same values as before. Thus we actually need to filter
486 * in this specific case.
488 if (old_termios
&& !tty_termios_hw_change(&tty
->termios
, old_termios
))
491 buf
= kzalloc(7, GFP_KERNEL
);
493 dev_err(&port
->dev
, "%s - out of memory.\n", __func__
);
494 /* Report back no change occurred */
496 tty
->termios
= *old_termios
;
500 i
= usb_control_msg(serial
->dev
, usb_rcvctrlpipe(serial
->dev
, 0),
501 GET_LINE_REQUEST
, GET_LINE_REQUEST_TYPE
,
503 dev_dbg(&port
->dev
, "0xa1:0x21:0:0 %d - %7ph\n", i
, buf
);
506 switch (C_CSIZE(tty
)) {
520 dev_dbg(&port
->dev
, "data bits = %d\n", buf
[6]);
523 /* For reference: buf[0]:buf[3] baud rate value */
524 pl2303_encode_baudrate(tty
, port
, spriv
->type
, buf
);
526 /* For reference buf[4]=0 is 1 stop bits */
527 /* For reference buf[4]=1 is 1.5 stop bits */
528 /* For reference buf[4]=2 is 2 stop bits */
531 * NOTE: Comply with "real" UARTs / RS232:
532 * use 1.5 instead of 2 stop bits with 5 data bits
534 if (C_CSIZE(tty
) == CS5
) {
536 dev_dbg(&port
->dev
, "stop bits = 1.5\n");
539 dev_dbg(&port
->dev
, "stop bits = 2\n");
543 dev_dbg(&port
->dev
, "stop bits = 1\n");
547 /* For reference buf[5]=0 is none parity */
548 /* For reference buf[5]=1 is odd parity */
549 /* For reference buf[5]=2 is even parity */
550 /* For reference buf[5]=3 is mark parity */
551 /* For reference buf[5]=4 is space parity */
553 if (tty
->termios
.c_cflag
& CMSPAR
) {
555 dev_dbg(&port
->dev
, "parity = mark\n");
558 dev_dbg(&port
->dev
, "parity = odd\n");
561 if (tty
->termios
.c_cflag
& CMSPAR
) {
563 dev_dbg(&port
->dev
, "parity = space\n");
566 dev_dbg(&port
->dev
, "parity = even\n");
571 dev_dbg(&port
->dev
, "parity = none\n");
574 i
= usb_control_msg(serial
->dev
, usb_sndctrlpipe(serial
->dev
, 0),
575 SET_LINE_REQUEST
, SET_LINE_REQUEST_TYPE
,
577 dev_dbg(&port
->dev
, "0x21:0x20:0:0 %d\n", i
);
579 /* change control lines if we are switching to or from B0 */
580 spin_lock_irqsave(&priv
->lock
, flags
);
581 control
= priv
->line_control
;
582 if (C_BAUD(tty
) == B0
)
583 priv
->line_control
&= ~(CONTROL_DTR
| CONTROL_RTS
);
584 else if (old_termios
&& (old_termios
->c_cflag
& CBAUD
) == B0
)
585 priv
->line_control
|= (CONTROL_DTR
| CONTROL_RTS
);
586 if (control
!= priv
->line_control
) {
587 control
= priv
->line_control
;
588 spin_unlock_irqrestore(&priv
->lock
, flags
);
589 pl2303_set_control_lines(port
, control
);
591 spin_unlock_irqrestore(&priv
->lock
, flags
);
595 i
= usb_control_msg(serial
->dev
, usb_rcvctrlpipe(serial
->dev
, 0),
596 GET_LINE_REQUEST
, GET_LINE_REQUEST_TYPE
,
598 dev_dbg(&port
->dev
, "0xa1:0x21:0:0 %d - %7ph\n", i
, buf
);
600 if (C_CRTSCTS(tty
)) {
601 if (spriv
->type
== type_0
|| spriv
->type
== type_1
)
602 pl2303_vendor_write(0x0, 0x41, serial
);
604 pl2303_vendor_write(0x0, 0x61, serial
);
606 pl2303_vendor_write(0x0, 0x0, serial
);
612 static void pl2303_dtr_rts(struct usb_serial_port
*port
, int on
)
614 struct pl2303_private
*priv
= usb_get_serial_port_data(port
);
618 spin_lock_irqsave(&priv
->lock
, flags
);
619 /* Change DTR and RTS */
621 priv
->line_control
|= (CONTROL_DTR
| CONTROL_RTS
);
623 priv
->line_control
&= ~(CONTROL_DTR
| CONTROL_RTS
);
624 control
= priv
->line_control
;
625 spin_unlock_irqrestore(&priv
->lock
, flags
);
626 pl2303_set_control_lines(port
, control
);
629 static void pl2303_close(struct usb_serial_port
*port
)
631 usb_serial_generic_close(port
);
632 usb_kill_urb(port
->interrupt_in_urb
);
635 static int pl2303_open(struct tty_struct
*tty
, struct usb_serial_port
*port
)
637 struct usb_serial
*serial
= port
->serial
;
638 struct pl2303_serial_private
*spriv
= usb_get_serial_data(serial
);
641 if (spriv
->type
== type_0
|| spriv
->type
== type_1
) {
642 usb_clear_halt(serial
->dev
, port
->write_urb
->pipe
);
643 usb_clear_halt(serial
->dev
, port
->read_urb
->pipe
);
645 /* reset upstream data pipes */
646 pl2303_vendor_write(8, 0, serial
);
647 pl2303_vendor_write(9, 0, serial
);
652 pl2303_set_termios(tty
, port
, NULL
);
654 result
= usb_submit_urb(port
->interrupt_in_urb
, GFP_KERNEL
);
656 dev_err(&port
->dev
, "%s - failed submitting interrupt urb,"
657 " error %d\n", __func__
, result
);
661 result
= usb_serial_generic_open(tty
, port
);
663 usb_kill_urb(port
->interrupt_in_urb
);
670 static int pl2303_tiocmset(struct tty_struct
*tty
,
671 unsigned int set
, unsigned int clear
)
673 struct usb_serial_port
*port
= tty
->driver_data
;
674 struct pl2303_private
*priv
= usb_get_serial_port_data(port
);
679 spin_lock_irqsave(&priv
->lock
, flags
);
681 priv
->line_control
|= CONTROL_RTS
;
683 priv
->line_control
|= CONTROL_DTR
;
684 if (clear
& TIOCM_RTS
)
685 priv
->line_control
&= ~CONTROL_RTS
;
686 if (clear
& TIOCM_DTR
)
687 priv
->line_control
&= ~CONTROL_DTR
;
688 control
= priv
->line_control
;
689 spin_unlock_irqrestore(&priv
->lock
, flags
);
691 ret
= pl2303_set_control_lines(port
, control
);
693 return usb_translate_errors(ret
);
698 static int pl2303_tiocmget(struct tty_struct
*tty
)
700 struct usb_serial_port
*port
= tty
->driver_data
;
701 struct pl2303_private
*priv
= usb_get_serial_port_data(port
);
707 spin_lock_irqsave(&priv
->lock
, flags
);
708 mcr
= priv
->line_control
;
709 status
= priv
->line_status
;
710 spin_unlock_irqrestore(&priv
->lock
, flags
);
712 result
= ((mcr
& CONTROL_DTR
) ? TIOCM_DTR
: 0)
713 | ((mcr
& CONTROL_RTS
) ? TIOCM_RTS
: 0)
714 | ((status
& UART_CTS
) ? TIOCM_CTS
: 0)
715 | ((status
& UART_DSR
) ? TIOCM_DSR
: 0)
716 | ((status
& UART_RING
) ? TIOCM_RI
: 0)
717 | ((status
& UART_DCD
) ? TIOCM_CD
: 0);
719 dev_dbg(&port
->dev
, "%s - result = %x\n", __func__
, result
);
724 static int pl2303_carrier_raised(struct usb_serial_port
*port
)
726 struct pl2303_private
*priv
= usb_get_serial_port_data(port
);
727 if (priv
->line_status
& UART_DCD
)
732 static int pl2303_tiocmiwait(struct tty_struct
*tty
, unsigned long arg
)
734 struct usb_serial_port
*port
= tty
->driver_data
;
735 struct pl2303_private
*priv
= usb_get_serial_port_data(port
);
737 unsigned int prevstatus
;
739 unsigned int changed
;
741 spin_lock_irqsave(&priv
->lock
, flags
);
742 prevstatus
= priv
->line_status
;
743 spin_unlock_irqrestore(&priv
->lock
, flags
);
746 interruptible_sleep_on(&port
->port
.delta_msr_wait
);
747 /* see if a signal did it */
748 if (signal_pending(current
))
751 if (port
->serial
->disconnected
)
754 spin_lock_irqsave(&priv
->lock
, flags
);
755 status
= priv
->line_status
;
756 spin_unlock_irqrestore(&priv
->lock
, flags
);
758 changed
= prevstatus
^ status
;
760 if (((arg
& TIOCM_RNG
) && (changed
& UART_RING
)) ||
761 ((arg
& TIOCM_DSR
) && (changed
& UART_DSR
)) ||
762 ((arg
& TIOCM_CD
) && (changed
& UART_DCD
)) ||
763 ((arg
& TIOCM_CTS
) && (changed
& UART_CTS
))) {
772 static int pl2303_ioctl(struct tty_struct
*tty
,
773 unsigned int cmd
, unsigned long arg
)
775 struct serial_struct ser
;
776 struct usb_serial_port
*port
= tty
->driver_data
;
778 dev_dbg(&port
->dev
, "%s cmd = 0x%04x\n", __func__
, cmd
);
782 memset(&ser
, 0, sizeof ser
);
783 ser
.type
= PORT_16654
;
784 ser
.line
= port
->minor
;
785 ser
.port
= port
->port_number
;
786 ser
.baud_base
= 460800;
788 if (copy_to_user((void __user
*)arg
, &ser
, sizeof ser
))
793 dev_dbg(&port
->dev
, "%s not supported = 0x%04x\n", __func__
, cmd
);
799 static void pl2303_break_ctl(struct tty_struct
*tty
, int break_state
)
801 struct usb_serial_port
*port
= tty
->driver_data
;
802 struct usb_serial
*serial
= port
->serial
;
806 if (break_state
== 0)
810 dev_dbg(&port
->dev
, "%s - turning break %s\n", __func__
,
811 state
== BREAK_OFF
? "off" : "on");
813 result
= usb_control_msg(serial
->dev
, usb_sndctrlpipe(serial
->dev
, 0),
814 BREAK_REQUEST
, BREAK_REQUEST_TYPE
, state
,
817 dev_err(&port
->dev
, "error sending break = %d\n", result
);
820 static void pl2303_update_line_status(struct usb_serial_port
*port
,
822 unsigned int actual_length
)
825 struct pl2303_private
*priv
= usb_get_serial_port_data(port
);
826 struct tty_struct
*tty
;
828 u8 status_idx
= UART_STATE
;
829 u8 length
= UART_STATE
+ 1;
833 idv
= le16_to_cpu(port
->serial
->dev
->descriptor
.idVendor
);
834 idp
= le16_to_cpu(port
->serial
->dev
->descriptor
.idProduct
);
837 if (idv
== SIEMENS_VENDOR_ID
) {
838 if (idp
== SIEMENS_PRODUCT_ID_X65
||
839 idp
== SIEMENS_PRODUCT_ID_SX1
||
840 idp
== SIEMENS_PRODUCT_ID_X75
) {
847 if (actual_length
< length
)
850 /* Save off the uart status for others to look at */
851 spin_lock_irqsave(&priv
->lock
, flags
);
852 prev_line_status
= priv
->line_status
;
853 priv
->line_status
= data
[status_idx
];
854 spin_unlock_irqrestore(&priv
->lock
, flags
);
855 if (priv
->line_status
& UART_BREAK_ERROR
)
856 usb_serial_handle_break(port
);
857 wake_up_interruptible(&port
->port
.delta_msr_wait
);
859 tty
= tty_port_tty_get(&port
->port
);
862 if ((priv
->line_status
^ prev_line_status
) & UART_DCD
)
863 usb_serial_handle_dcd_change(port
, tty
,
864 priv
->line_status
& UART_DCD
);
868 static void pl2303_read_int_callback(struct urb
*urb
)
870 struct usb_serial_port
*port
= urb
->context
;
871 unsigned char *data
= urb
->transfer_buffer
;
872 unsigned int actual_length
= urb
->actual_length
;
873 int status
= urb
->status
;
883 /* this urb is terminated, clean up */
884 dev_dbg(&port
->dev
, "%s - urb shutting down with status: %d\n",
888 dev_dbg(&port
->dev
, "%s - nonzero urb status received: %d\n",
893 usb_serial_debug_data(&port
->dev
, __func__
,
894 urb
->actual_length
, urb
->transfer_buffer
);
896 pl2303_update_line_status(port
, data
, actual_length
);
899 retval
= usb_submit_urb(urb
, GFP_ATOMIC
);
902 "%s - usb_submit_urb failed with result %d\n",
906 static void pl2303_process_read_urb(struct urb
*urb
)
908 struct usb_serial_port
*port
= urb
->context
;
909 struct pl2303_private
*priv
= usb_get_serial_port_data(port
);
910 unsigned char *data
= urb
->transfer_buffer
;
911 char tty_flag
= TTY_NORMAL
;
916 /* update line status */
917 spin_lock_irqsave(&priv
->lock
, flags
);
918 line_status
= priv
->line_status
;
919 priv
->line_status
&= ~UART_STATE_TRANSIENT_MASK
;
920 spin_unlock_irqrestore(&priv
->lock
, flags
);
921 wake_up_interruptible(&port
->port
.delta_msr_wait
);
923 if (!urb
->actual_length
)
926 /* break takes precedence over parity, */
927 /* which takes precedence over framing errors */
928 if (line_status
& UART_BREAK_ERROR
)
929 tty_flag
= TTY_BREAK
;
930 else if (line_status
& UART_PARITY_ERROR
)
931 tty_flag
= TTY_PARITY
;
932 else if (line_status
& UART_FRAME_ERROR
)
933 tty_flag
= TTY_FRAME
;
935 if (tty_flag
!= TTY_NORMAL
)
936 dev_dbg(&port
->dev
, "%s - tty_flag = %d\n", __func__
,
938 /* overrun is special, not associated with a char */
939 if (line_status
& UART_OVERRUN_ERROR
)
940 tty_insert_flip_char(&port
->port
, 0, TTY_OVERRUN
);
942 if (port
->port
.console
&& port
->sysrq
) {
943 for (i
= 0; i
< urb
->actual_length
; ++i
)
944 if (!usb_serial_handle_sysrq_char(port
, data
[i
]))
945 tty_insert_flip_char(&port
->port
, data
[i
],
948 tty_insert_flip_string_fixed_flag(&port
->port
, data
, tty_flag
,
952 tty_flip_buffer_push(&port
->port
);
955 /* All of the device info needed for the PL2303 SIO serial converter */
956 static struct usb_serial_driver pl2303_device
= {
958 .owner
= THIS_MODULE
,
961 .id_table
= id_table
,
964 .bulk_out_size
= 256,
966 .close
= pl2303_close
,
967 .dtr_rts
= pl2303_dtr_rts
,
968 .carrier_raised
= pl2303_carrier_raised
,
969 .ioctl
= pl2303_ioctl
,
970 .break_ctl
= pl2303_break_ctl
,
971 .set_termios
= pl2303_set_termios
,
972 .tiocmget
= pl2303_tiocmget
,
973 .tiocmset
= pl2303_tiocmset
,
974 .tiocmiwait
= pl2303_tiocmiwait
,
975 .process_read_urb
= pl2303_process_read_urb
,
976 .read_int_callback
= pl2303_read_int_callback
,
977 .attach
= pl2303_startup
,
978 .release
= pl2303_release
,
979 .port_probe
= pl2303_port_probe
,
980 .port_remove
= pl2303_port_remove
,
983 static struct usb_serial_driver
* const serial_drivers
[] = {
987 module_usb_serial_driver(serial_drivers
, id_table
);
989 MODULE_DESCRIPTION(DRIVER_DESC
);
990 MODULE_LICENSE("GPL");