projects / deliverable / linux.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
[deliverable/linux.git] / drivers / usb / serial / pl2303.c
1 /*
2 * Prolific PL2303 USB to serial adaptor driver
3 *
4 * Copyright (C) 2001-2007 Greg Kroah-Hartman (greg@kroah.com)
5 * Copyright (C) 2003 IBM Corp.
6 *
7 * Original driver for 2.2.x by anonymous
8 *
9 * This program is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License version
11 * 2 as published by the Free Software Foundation.
12 *
13 * See Documentation/usb/usb-serial.txt for more information on using this driver
14 *
15 */
16
17 #include <linux/kernel.h>
18 #include <linux/errno.h>
19 #include <linux/init.h>
20 #include <linux/slab.h>
21 #include <linux/tty.h>
22 #include <linux/tty_driver.h>
23 #include <linux/tty_flip.h>
24 #include <linux/serial.h>
25 #include <linux/module.h>
26 #include <linux/moduleparam.h>
27 #include <linux/spinlock.h>
28 #include <asm/uaccess.h>
29 #include <linux/usb.h>
30 #include <linux/usb/serial.h>
31 #include "pl2303.h"
32
33 /*
34 * Version Information
35 */
36 #define DRIVER_DESC "Prolific PL2303 USB to serial adaptor driver"
37
38 static int debug;
39
40 #define PL2303_CLOSING_WAIT (30*HZ)
41
42 #define PL2303_BUF_SIZE 1024
43 #define PL2303_TMP_BUF_SIZE 1024
44
45 struct pl2303_buf {
46 unsigned int buf_size;
47 char *buf_buf;
48 char *buf_get;
49 char *buf_put;
50 };
51
52 static struct usb_device_id id_table [] = {
53 { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID) },
54 { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ2) },
55 { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_DCU11) },
56 { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ3) },
57 { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_PHAROS) },
58 { USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) },
59 { USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID) },
60 { USB_DEVICE(ATEN_VENDOR_ID2, ATEN_PRODUCT_ID) },
61 { USB_DEVICE(ELCOM_VENDOR_ID, ELCOM_PRODUCT_ID) },
62 { USB_DEVICE(ELCOM_VENDOR_ID, ELCOM_PRODUCT_ID_UCSGT) },
63 { USB_DEVICE(ITEGNO_VENDOR_ID, ITEGNO_PRODUCT_ID) },
64 { USB_DEVICE(ITEGNO_VENDOR_ID, ITEGNO_PRODUCT_ID_2080) },
65 { USB_DEVICE(MA620_VENDOR_ID, MA620_PRODUCT_ID) },
66 { USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID) },
67 { USB_DEVICE(TRIPP_VENDOR_ID, TRIPP_PRODUCT_ID) },
68 { USB_DEVICE(RADIOSHACK_VENDOR_ID, RADIOSHACK_PRODUCT_ID) },
69 { USB_DEVICE(DCU10_VENDOR_ID, DCU10_PRODUCT_ID) },
70 { USB_DEVICE(SITECOM_VENDOR_ID, SITECOM_PRODUCT_ID) },
71 { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_ID) },
72 { USB_DEVICE(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_ID) },
73 { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_SX1) },
74 { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X65) },
75 { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X75) },
76 { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_EF81) },
77 { USB_DEVICE(SYNTECH_VENDOR_ID, SYNTECH_PRODUCT_ID) },
78 { USB_DEVICE(NOKIA_CA42_VENDOR_ID, NOKIA_CA42_PRODUCT_ID) },
79 { USB_DEVICE(CA_42_CA42_VENDOR_ID, CA_42_CA42_PRODUCT_ID) },
80 { USB_DEVICE(SAGEM_VENDOR_ID, SAGEM_PRODUCT_ID) },
81 { USB_DEVICE(LEADTEK_VENDOR_ID, LEADTEK_9531_PRODUCT_ID) },
82 { USB_DEVICE(SPEEDDRAGON_VENDOR_ID, SPEEDDRAGON_PRODUCT_ID) },
83 { USB_DEVICE(DATAPILOT_U2_VENDOR_ID, DATAPILOT_U2_PRODUCT_ID) },
84 { USB_DEVICE(BELKIN_VENDOR_ID, BELKIN_PRODUCT_ID) },
85 { USB_DEVICE(ALCOR_VENDOR_ID, ALCOR_PRODUCT_ID) },
86 { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_ID) },
87 { USB_DEVICE(WS002IN_VENDOR_ID, WS002IN_PRODUCT_ID) },
88 { } /* Terminating entry */
89 };
90
91 MODULE_DEVICE_TABLE(usb, id_table);
92
93 static struct usb_driver pl2303_driver = {
94 .name = "pl2303",
95 .probe = usb_serial_probe,
96 .disconnect = usb_serial_disconnect,
97 .id_table = id_table,
98 .no_dynamic_id = 1,
99 };
100
101 #define SET_LINE_REQUEST_TYPE 0x21
102 #define SET_LINE_REQUEST 0x20
103
104 #define SET_CONTROL_REQUEST_TYPE 0x21
105 #define SET_CONTROL_REQUEST 0x22
106 #define CONTROL_DTR 0x01
107 #define CONTROL_RTS 0x02
108
109 #define BREAK_REQUEST_TYPE 0x21
110 #define BREAK_REQUEST 0x23
111 #define BREAK_ON 0xffff
112 #define BREAK_OFF 0x0000
113
114 #define GET_LINE_REQUEST_TYPE 0xa1
115 #define GET_LINE_REQUEST 0x21
116
117 #define VENDOR_WRITE_REQUEST_TYPE 0x40
118 #define VENDOR_WRITE_REQUEST 0x01
119
120 #define VENDOR_READ_REQUEST_TYPE 0xc0
121 #define VENDOR_READ_REQUEST 0x01
122
123 #define UART_STATE 0x08
124 #define UART_STATE_TRANSIENT_MASK 0x74
125 #define UART_DCD 0x01
126 #define UART_DSR 0x02
127 #define UART_BREAK_ERROR 0x04
128 #define UART_RING 0x08
129 #define UART_FRAME_ERROR 0x10
130 #define UART_PARITY_ERROR 0x20
131 #define UART_OVERRUN_ERROR 0x40
132 #define UART_CTS 0x80
133
134
135 enum pl2303_type {
136 type_0, /* don't know the difference between type 0 and */
137 type_1, /* type 1, until someone from prolific tells us... */
138 HX, /* HX version of the pl2303 chip */
139 };
140
141 struct pl2303_private {
142 spinlock_t lock;
143 struct pl2303_buf *buf;
144 int write_urb_in_use;
145 wait_queue_head_t delta_msr_wait;
146 u8 line_control;
147 u8 line_status;
148 u8 termios_initialized;
149 enum pl2303_type type;
150 };
151
152 /*
153 * pl2303_buf_alloc
154 *
155 * Allocate a circular buffer and all associated memory.
156 */
157 static struct pl2303_buf *pl2303_buf_alloc(unsigned int size)
158 {
159 struct pl2303_buf *pb;
160
161 if (size == 0)
162 return NULL;
163
164 pb = kmalloc(sizeof(struct pl2303_buf), GFP_KERNEL);
165 if (pb == NULL)
166 return NULL;
167
168 pb->buf_buf = kmalloc(size, GFP_KERNEL);
169 if (pb->buf_buf == NULL) {
170 kfree(pb);
171 return NULL;
172 }
173
174 pb->buf_size = size;
175 pb->buf_get = pb->buf_put = pb->buf_buf;
176
177 return pb;
178 }
179
180 /*
181 * pl2303_buf_free
182 *
183 * Free the buffer and all associated memory.
184 */
185 static void pl2303_buf_free(struct pl2303_buf *pb)
186 {
187 if (pb) {
188 kfree(pb->buf_buf);
189 kfree(pb);
190 }
191 }
192
193 /*
194 * pl2303_buf_clear
195 *
196 * Clear out all data in the circular buffer.
197 */
198 static void pl2303_buf_clear(struct pl2303_buf *pb)
199 {
200 if (pb != NULL)
201 pb->buf_get = pb->buf_put;
202 /* equivalent to a get of all data available */
203 }
204
205 /*
206 * pl2303_buf_data_avail
207 *
208 * Return the number of bytes of data available in the circular
209 * buffer.
210 */
211 static unsigned int pl2303_buf_data_avail(struct pl2303_buf *pb)
212 {
213 if (pb == NULL)
214 return 0;
215
216 return ((pb->buf_size + pb->buf_put - pb->buf_get) % pb->buf_size);
217 }
218
219 /*
220 * pl2303_buf_space_avail
221 *
222 * Return the number of bytes of space available in the circular
223 * buffer.
224 */
225 static unsigned int pl2303_buf_space_avail(struct pl2303_buf *pb)
226 {
227 if (pb == NULL)
228 return 0;
229
230 return ((pb->buf_size + pb->buf_get - pb->buf_put - 1) % pb->buf_size);
231 }
232
233 /*
234 * pl2303_buf_put
235 *
236 * Copy data data from a user buffer and put it into the circular buffer.
237 * Restrict to the amount of space available.
238 *
239 * Return the number of bytes copied.
240 */
241 static unsigned int pl2303_buf_put(struct pl2303_buf *pb, const char *buf,
242 unsigned int count)
243 {
244 unsigned int len;
245
246 if (pb == NULL)
247 return 0;
248
249 len = pl2303_buf_space_avail(pb);
250 if (count > len)
251 count = len;
252
253 if (count == 0)
254 return 0;
255
256 len = pb->buf_buf + pb->buf_size - pb->buf_put;
257 if (count > len) {
258 memcpy(pb->buf_put, buf, len);
259 memcpy(pb->buf_buf, buf+len, count - len);
260 pb->buf_put = pb->buf_buf + count - len;
261 } else {
262 memcpy(pb->buf_put, buf, count);
263 if (count < len)
264 pb->buf_put += count;
265 else /* count == len */
266 pb->buf_put = pb->buf_buf;
267 }
268
269 return count;
270 }
271
272 /*
273 * pl2303_buf_get
274 *
275 * Get data from the circular buffer and copy to the given buffer.
276 * Restrict to the amount of data available.
277 *
278 * Return the number of bytes copied.
279 */
280 static unsigned int pl2303_buf_get(struct pl2303_buf *pb, char *buf,
281 unsigned int count)
282 {
283 unsigned int len;
284
285 if (pb == NULL)
286 return 0;
287
288 len = pl2303_buf_data_avail(pb);
289 if (count > len)
290 count = len;
291
292 if (count == 0)
293 return 0;
294
295 len = pb->buf_buf + pb->buf_size - pb->buf_get;
296 if (count > len) {
297 memcpy(buf, pb->buf_get, len);
298 memcpy(buf+len, pb->buf_buf, count - len);
299 pb->buf_get = pb->buf_buf + count - len;
300 } else {
301 memcpy(buf, pb->buf_get, count);
302 if (count < len)
303 pb->buf_get += count;
304 else /* count == len */
305 pb->buf_get = pb->buf_buf;
306 }
307
308 return count;
309 }
310
311 static int pl2303_startup(struct usb_serial *serial)
312 {
313 struct pl2303_private *priv;
314 enum pl2303_type type = type_0;
315 int i;
316
317 if (serial->dev->descriptor.bDeviceClass == 0x02)
318 type = type_0;
319 else if (serial->dev->descriptor.bMaxPacketSize0 == 0x40)
320 type = HX;
321 else if (serial->dev->descriptor.bDeviceClass == 0x00)
322 type = type_1;
323 else if (serial->dev->descriptor.bDeviceClass == 0xFF)
324 type = type_1;
325 dbg("device type: %d", type);
326
327 for (i = 0; i < serial->num_ports; ++i) {
328 priv = kzalloc(sizeof(struct pl2303_private), GFP_KERNEL);
329 if (!priv)
330 goto cleanup;
331 spin_lock_init(&priv->lock);
332 priv->buf = pl2303_buf_alloc(PL2303_BUF_SIZE);
333 if (priv->buf == NULL) {
334 kfree(priv);
335 goto cleanup;
336 }
337 init_waitqueue_head(&priv->delta_msr_wait);
338 priv->type = type;
339 usb_set_serial_port_data(serial->port[i], priv);
340 }
341 return 0;
342
343 cleanup:
344 for (--i; i>=0; --i) {
345 priv = usb_get_serial_port_data(serial->port[i]);
346 pl2303_buf_free(priv->buf);
347 kfree(priv);
348 usb_set_serial_port_data(serial->port[i], NULL);
349 }
350 return -ENOMEM;
351 }
352
353 static int set_control_lines(struct usb_device *dev, u8 value)
354 {
355 int retval;
356
357 retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
358 SET_CONTROL_REQUEST, SET_CONTROL_REQUEST_TYPE,
359 value, 0, NULL, 0, 100);
360 dbg("%s - value = %d, retval = %d", __FUNCTION__, value, retval);
361 return retval;
362 }
363
364 static void pl2303_send(struct usb_serial_port *port)
365 {
366 int count, result;
367 struct pl2303_private *priv = usb_get_serial_port_data(port);
368 unsigned long flags;
369
370 dbg("%s - port %d", __FUNCTION__, port->number);
371
372 spin_lock_irqsave(&priv->lock, flags);
373
374 if (priv->write_urb_in_use) {
375 spin_unlock_irqrestore(&priv->lock, flags);
376 return;
377 }
378
379 count = pl2303_buf_get(priv->buf, port->write_urb->transfer_buffer,
380 port->bulk_out_size);
381
382 if (count == 0) {
383 spin_unlock_irqrestore(&priv->lock, flags);
384 return;
385 }
386
387 priv->write_urb_in_use = 1;
388
389 spin_unlock_irqrestore(&priv->lock, flags);
390
391 usb_serial_debug_data(debug, &port->dev, __FUNCTION__, count,
392 port->write_urb->transfer_buffer);
393
394 port->write_urb->transfer_buffer_length = count;
395 port->write_urb->dev = port->serial->dev;
396 result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
397 if (result) {
398 dev_err(&port->dev, "%s - failed submitting write urb,"
399 " error %d\n", __FUNCTION__, result);
400 priv->write_urb_in_use = 0;
401 // TODO: reschedule pl2303_send
402 }
403
404 usb_serial_port_softint(port);
405 }
406
407 static int pl2303_write(struct usb_serial_port *port, const unsigned char *buf,
408 int count)
409 {
410 struct pl2303_private *priv = usb_get_serial_port_data(port);
411 unsigned long flags;
412
413 dbg("%s - port %d, %d bytes", __FUNCTION__, port->number, count);
414
415 if (!count)
416 return count;
417
418 spin_lock_irqsave(&priv->lock, flags);
419 count = pl2303_buf_put(priv->buf, buf, count);
420 spin_unlock_irqrestore(&priv->lock, flags);
421
422 pl2303_send(port);
423
424 return count;
425 }
426
427 static int pl2303_write_room(struct usb_serial_port *port)
428 {
429 struct pl2303_private *priv = usb_get_serial_port_data(port);
430 int room = 0;
431 unsigned long flags;
432
433 dbg("%s - port %d", __FUNCTION__, port->number);
434
435 spin_lock_irqsave(&priv->lock, flags);
436 room = pl2303_buf_space_avail(priv->buf);
437 spin_unlock_irqrestore(&priv->lock, flags);
438
439 dbg("%s - returns %d", __FUNCTION__, room);
440 return room;
441 }
442
443 static int pl2303_chars_in_buffer(struct usb_serial_port *port)
444 {
445 struct pl2303_private *priv = usb_get_serial_port_data(port);
446 int chars = 0;
447 unsigned long flags;
448
449 dbg("%s - port %d", __FUNCTION__, port->number);
450
451 spin_lock_irqsave(&priv->lock, flags);
452 chars = pl2303_buf_data_avail(priv->buf);
453 spin_unlock_irqrestore(&priv->lock, flags);
454
455 dbg("%s - returns %d", __FUNCTION__, chars);
456 return chars;
457 }
458
459 static void pl2303_set_termios(struct usb_serial_port *port,
460 struct ktermios *old_termios)
461 {
462 struct usb_serial *serial = port->serial;
463 struct pl2303_private *priv = usb_get_serial_port_data(port);
464 unsigned long flags;
465 unsigned int cflag;
466 unsigned char *buf;
467 int baud;
468 int i;
469 u8 control;
470
471 dbg("%s - port %d", __FUNCTION__, port->number);
472
473 if ((!port->tty) || (!port->tty->termios)) {
474 dbg("%s - no tty structures", __FUNCTION__);
475 return;
476 }
477
478 spin_lock_irqsave(&priv->lock, flags);
479 if (!priv->termios_initialized) {
480 *(port->tty->termios) = tty_std_termios;
481 port->tty->termios->c_cflag = B9600 | CS8 | CREAD |
482 HUPCL | CLOCAL;
483 priv->termios_initialized = 1;
484 }
485 spin_unlock_irqrestore(&priv->lock, flags);
486
487 cflag = port->tty->termios->c_cflag;
488
489 buf = kzalloc(7, GFP_KERNEL);
490 if (!buf) {
491 dev_err(&port->dev, "%s - out of memory.\n", __FUNCTION__);
492 return;
493 }
494
495 i = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
496 GET_LINE_REQUEST, GET_LINE_REQUEST_TYPE,
497 0, 0, buf, 7, 100);
498 dbg("0xa1:0x21:0:0 %d - %x %x %x %x %x %x %x", i,
499 buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6]);
500
501 if (cflag & CSIZE) {
502 switch (cflag & CSIZE) {
503 case CS5: buf[6] = 5; break;
504 case CS6: buf[6] = 6; break;
505 case CS7: buf[6] = 7; break;
506 default:
507 case CS8: buf[6] = 8; break;
508 }
509 dbg("%s - data bits = %d", __FUNCTION__, buf[6]);
510 }
511
512 baud = tty_get_baud_rate(port->tty);;
513 dbg("%s - baud = %d", __FUNCTION__, baud);
514 if (baud) {
515 buf[0] = baud & 0xff;
516 buf[1] = (baud >> 8) & 0xff;
517 buf[2] = (baud >> 16) & 0xff;
518 buf[3] = (baud >> 24) & 0xff;
519 }
520
521 /* For reference buf[4]=0 is 1 stop bits */
522 /* For reference buf[4]=1 is 1.5 stop bits */
523 /* For reference buf[4]=2 is 2 stop bits */
524 if (cflag & CSTOPB) {
525 buf[4] = 2;
526 dbg("%s - stop bits = 2", __FUNCTION__);
527 } else {
528 buf[4] = 0;
529 dbg("%s - stop bits = 1", __FUNCTION__);
530 }
531
532 if (cflag & PARENB) {
533 /* For reference buf[5]=0 is none parity */
534 /* For reference buf[5]=1 is odd parity */
535 /* For reference buf[5]=2 is even parity */
536 /* For reference buf[5]=3 is mark parity */
537 /* For reference buf[5]=4 is space parity */
538 if (cflag & PARODD) {
539 buf[5] = 1;
540 dbg("%s - parity = odd", __FUNCTION__);
541 } else {
542 buf[5] = 2;
543 dbg("%s - parity = even", __FUNCTION__);
544 }
545 } else {
546 buf[5] = 0;
547 dbg("%s - parity = none", __FUNCTION__);
548 }
549
550 i = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
551 SET_LINE_REQUEST, SET_LINE_REQUEST_TYPE,
552 0, 0, buf, 7, 100);
553 dbg("0x21:0x20:0:0 %d", i);
554
555 /* change control lines if we are switching to or from B0 */
556 spin_lock_irqsave(&priv->lock, flags);
557 control = priv->line_control;
558 if ((cflag & CBAUD) == B0)
559 priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
560 else
561 priv->line_control |= (CONTROL_DTR | CONTROL_RTS);
562 if (control != priv->line_control) {
563 control = priv->line_control;
564 spin_unlock_irqrestore(&priv->lock, flags);
565 set_control_lines(serial->dev, control);
566 } else {
567 spin_unlock_irqrestore(&priv->lock, flags);
568 }
569
570 buf[0] = buf[1] = buf[2] = buf[3] = buf[4] = buf[5] = buf[6] = 0;
571
572 i = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
573 GET_LINE_REQUEST, GET_LINE_REQUEST_TYPE,
574 0, 0, buf, 7, 100);
575 dbg("0xa1:0x21:0:0 %d - %x %x %x %x %x %x %x", i,
576 buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6]);
577
578 if (cflag & CRTSCTS) {
579 __u16 index;
580 if (priv->type == HX)
581 index = 0x61;
582 else
583 index = 0x41;
584 i = usb_control_msg(serial->dev,
585 usb_sndctrlpipe(serial->dev, 0),
586 VENDOR_WRITE_REQUEST,
587 VENDOR_WRITE_REQUEST_TYPE,
588 0x0, index, NULL, 0, 100);
589 dbg("0x40:0x1:0x0:0x%x %d", index, i);
590 } else {
591 i = usb_control_msg(serial->dev,
592 usb_sndctrlpipe(serial->dev, 0),
593 VENDOR_WRITE_REQUEST,
594 VENDOR_WRITE_REQUEST_TYPE,
595 0x0, 0x0, NULL, 0, 100);
596 dbg ("0x40:0x1:0x0:0x0 %d", i);
597 }
598
599 kfree(buf);
600 }
601
602 static void pl2303_close(struct usb_serial_port *port, struct file *filp)
603 {
604 struct pl2303_private *priv = usb_get_serial_port_data(port);
605 unsigned long flags;
606 unsigned int c_cflag;
607 int bps;
608 long timeout;
609 wait_queue_t wait;
610
611 dbg("%s - port %d", __FUNCTION__, port->number);
612
613 /* wait for data to drain from the buffer */
614 spin_lock_irqsave(&priv->lock, flags);
615 timeout = PL2303_CLOSING_WAIT;
616 init_waitqueue_entry(&wait, current);
617 add_wait_queue(&port->tty->write_wait, &wait);
618 for (;;) {
619 set_current_state(TASK_INTERRUPTIBLE);
620 if (pl2303_buf_data_avail(priv->buf) == 0 ||
621 timeout == 0 || signal_pending(current) ||
622 !usb_get_intfdata(port->serial->interface)) /* disconnect */
623 break;
624 spin_unlock_irqrestore(&priv->lock, flags);
625 timeout = schedule_timeout(timeout);
626 spin_lock_irqsave(&priv->lock, flags);
627 }
628 set_current_state(TASK_RUNNING);
629 remove_wait_queue(&port->tty->write_wait, &wait);
630 /* clear out any remaining data in the buffer */
631 pl2303_buf_clear(priv->buf);
632 spin_unlock_irqrestore(&priv->lock, flags);
633
634 /* wait for characters to drain from the device */
635 /* (this is long enough for the entire 256 byte */
636 /* pl2303 hardware buffer to drain with no flow */
637 /* control for data rates of 1200 bps or more, */
638 /* for lower rates we should really know how much */
639 /* data is in the buffer to compute a delay */
640 /* that is not unnecessarily long) */
641 bps = tty_get_baud_rate(port->tty);
642 if (bps > 1200)
643 timeout = max((HZ*2560)/bps,HZ/10);
644 else
645 timeout = 2*HZ;
646 schedule_timeout_interruptible(timeout);
647
648 /* shutdown our urbs */
649 dbg("%s - shutting down urbs", __FUNCTION__);
650 usb_kill_urb(port->write_urb);
651 usb_kill_urb(port->read_urb);
652 usb_kill_urb(port->interrupt_in_urb);
653
654 if (port->tty) {
655 c_cflag = port->tty->termios->c_cflag;
656 if (c_cflag & HUPCL) {
657 /* drop DTR and RTS */
658 spin_lock_irqsave(&priv->lock, flags);
659 priv->line_control = 0;
660 spin_unlock_irqrestore(&priv->lock, flags);
661 set_control_lines(port->serial->dev, 0);
662 }
663 }
664 }
665
666 static int pl2303_open(struct usb_serial_port *port, struct file *filp)
667 {
668 struct ktermios tmp_termios;
669 struct usb_serial *serial = port->serial;
670 struct pl2303_private *priv = usb_get_serial_port_data(port);
671 unsigned char *buf;
672 int result;
673
674 dbg("%s - port %d", __FUNCTION__, port->number);
675
676 if (priv->type != HX) {
677 usb_clear_halt(serial->dev, port->write_urb->pipe);
678 usb_clear_halt(serial->dev, port->read_urb->pipe);
679 }
680
681 buf = kmalloc(10, GFP_KERNEL);
682 if (buf==NULL)
683 return -ENOMEM;
684
685 #define FISH(a,b,c,d) \
686 result=usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev,0), \
687 b, a, c, d, buf, 1, 100); \
688 dbg("0x%x:0x%x:0x%x:0x%x %d - %x",a,b,c,d,result,buf[0]);
689
690 #define SOUP(a,b,c,d) \
691 result=usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev,0), \
692 b, a, c, d, NULL, 0, 100); \
693 dbg("0x%x:0x%x:0x%x:0x%x %d",a,b,c,d,result);
694
695 FISH (VENDOR_READ_REQUEST_TYPE, VENDOR_READ_REQUEST, 0x8484, 0);
696 SOUP (VENDOR_WRITE_REQUEST_TYPE, VENDOR_WRITE_REQUEST, 0x0404, 0);
697 FISH (VENDOR_READ_REQUEST_TYPE, VENDOR_READ_REQUEST, 0x8484, 0);
698 FISH (VENDOR_READ_REQUEST_TYPE, VENDOR_READ_REQUEST, 0x8383, 0);
699 FISH (VENDOR_READ_REQUEST_TYPE, VENDOR_READ_REQUEST, 0x8484, 0);
700 SOUP (VENDOR_WRITE_REQUEST_TYPE, VENDOR_WRITE_REQUEST, 0x0404, 1);
701 FISH (VENDOR_READ_REQUEST_TYPE, VENDOR_READ_REQUEST, 0x8484, 0);
702 FISH (VENDOR_READ_REQUEST_TYPE, VENDOR_READ_REQUEST, 0x8383, 0);
703 SOUP (VENDOR_WRITE_REQUEST_TYPE, VENDOR_WRITE_REQUEST, 0, 1);
704 SOUP (VENDOR_WRITE_REQUEST_TYPE, VENDOR_WRITE_REQUEST, 1, 0);
705
706 if (priv->type == HX) {
707 /* HX chip */
708 SOUP (VENDOR_WRITE_REQUEST_TYPE, VENDOR_WRITE_REQUEST, 2, 0x44);
709 /* reset upstream data pipes */
710 SOUP (VENDOR_WRITE_REQUEST_TYPE, VENDOR_WRITE_REQUEST, 8, 0);
711 SOUP (VENDOR_WRITE_REQUEST_TYPE, VENDOR_WRITE_REQUEST, 9, 0);
712 } else {
713 SOUP (VENDOR_WRITE_REQUEST_TYPE, VENDOR_WRITE_REQUEST, 2, 0x24);
714 }
715
716 kfree(buf);
717
718 /* Setup termios */
719 if (port->tty) {
720 pl2303_set_termios(port, &tmp_termios);
721 }
722
723 //FIXME: need to assert RTS and DTR if CRTSCTS off
724
725 dbg("%s - submitting read urb", __FUNCTION__);
726 port->read_urb->dev = serial->dev;
727 result = usb_submit_urb(port->read_urb, GFP_KERNEL);
728 if (result) {
729 dev_err(&port->dev, "%s - failed submitting read urb,"
730 " error %d\n", __FUNCTION__, result);
731 pl2303_close(port, NULL);
732 return -EPROTO;
733 }
734
735 dbg("%s - submitting interrupt urb", __FUNCTION__);
736 port->interrupt_in_urb->dev = serial->dev;
737 result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
738 if (result) {
739 dev_err(&port->dev, "%s - failed submitting interrupt urb,"
740 " error %d\n", __FUNCTION__, result);
741 pl2303_close(port, NULL);
742 return -EPROTO;
743 }
744 return 0;
745 }
746
747 static int pl2303_tiocmset(struct usb_serial_port *port, struct file *file,
748 unsigned int set, unsigned int clear)
749 {
750 struct pl2303_private *priv = usb_get_serial_port_data(port);
751 unsigned long flags;
752 u8 control;
753
754 if (!usb_get_intfdata(port->serial->interface))
755 return -ENODEV;
756
757 spin_lock_irqsave(&priv->lock, flags);
758 if (set & TIOCM_RTS)
759 priv->line_control |= CONTROL_RTS;
760 if (set & TIOCM_DTR)
761 priv->line_control |= CONTROL_DTR;
762 if (clear & TIOCM_RTS)
763 priv->line_control &= ~CONTROL_RTS;
764 if (clear & TIOCM_DTR)
765 priv->line_control &= ~CONTROL_DTR;
766 control = priv->line_control;
767 spin_unlock_irqrestore(&priv->lock, flags);
768
769 return set_control_lines(port->serial->dev, control);
770 }
771
772 static int pl2303_tiocmget(struct usb_serial_port *port, struct file *file)
773 {
774 struct pl2303_private *priv = usb_get_serial_port_data(port);
775 unsigned long flags;
776 unsigned int mcr;
777 unsigned int status;
778 unsigned int result;
779
780 dbg("%s (%d)", __FUNCTION__, port->number);
781
782 if (!usb_get_intfdata(port->serial->interface))
783 return -ENODEV;
784
785 spin_lock_irqsave(&priv->lock, flags);
786 mcr = priv->line_control;
787 status = priv->line_status;
788 spin_unlock_irqrestore(&priv->lock, flags);
789
790 result = ((mcr & CONTROL_DTR) ? TIOCM_DTR : 0)
791 | ((mcr & CONTROL_RTS) ? TIOCM_RTS : 0)
792 | ((status & UART_CTS) ? TIOCM_CTS : 0)
793 | ((status & UART_DSR) ? TIOCM_DSR : 0)
794 | ((status & UART_RING) ? TIOCM_RI : 0)
795 | ((status & UART_DCD) ? TIOCM_CD : 0);
796
797 dbg("%s - result = %x", __FUNCTION__, result);
798
799 return result;
800 }
801
802 static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
803 {
804 struct pl2303_private *priv = usb_get_serial_port_data(port);
805 unsigned long flags;
806 unsigned int prevstatus;
807 unsigned int status;
808 unsigned int changed;
809
810 spin_lock_irqsave(&priv->lock, flags);
811 prevstatus = priv->line_status;
812 spin_unlock_irqrestore(&priv->lock, flags);
813
814 while (1) {
815 interruptible_sleep_on(&priv->delta_msr_wait);
816 /* see if a signal did it */
817 if (signal_pending(current))
818 return -ERESTARTSYS;
819
820 spin_lock_irqsave(&priv->lock, flags);
821 status = priv->line_status;
822 spin_unlock_irqrestore(&priv->lock, flags);
823
824 changed=prevstatus^status;
825
826 if (((arg & TIOCM_RNG) && (changed & UART_RING)) ||
827 ((arg & TIOCM_DSR) && (changed & UART_DSR)) ||
828 ((arg & TIOCM_CD) && (changed & UART_DCD)) ||
829 ((arg & TIOCM_CTS) && (changed & UART_CTS)) ) {
830 return 0;
831 }
832 prevstatus = status;
833 }
834 /* NOTREACHED */
835 return 0;
836 }
837
838 static int pl2303_ioctl(struct usb_serial_port *port, struct file *file,
839 unsigned int cmd, unsigned long arg)
840 {
841 dbg("%s (%d) cmd = 0x%04x", __FUNCTION__, port->number, cmd);
842
843 switch (cmd) {
844 case TIOCMIWAIT:
845 dbg("%s (%d) TIOCMIWAIT", __FUNCTION__, port->number);
846 return wait_modem_info(port, arg);
847
848 default:
849 dbg("%s not supported = 0x%04x", __FUNCTION__, cmd);
850 break;
851 }
852
853 return -ENOIOCTLCMD;
854 }
855
856 static void pl2303_break_ctl(struct usb_serial_port *port, int break_state)
857 {
858 struct usb_serial *serial = port->serial;
859 u16 state;
860 int result;
861
862 dbg("%s - port %d", __FUNCTION__, port->number);
863
864 if (break_state == 0)
865 state = BREAK_OFF;
866 else
867 state = BREAK_ON;
868 dbg("%s - turning break %s", __FUNCTION__, state==BREAK_OFF ? "off" : "on");
869
870 result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
871 BREAK_REQUEST, BREAK_REQUEST_TYPE, state,
872 0, NULL, 0, 100);
873 if (result)
874 dbg("%s - error sending break = %d", __FUNCTION__, result);
875 }
876
877 static void pl2303_shutdown(struct usb_serial *serial)
878 {
879 int i;
880 struct pl2303_private *priv;
881
882 dbg("%s", __FUNCTION__);
883
884 for (i = 0; i < serial->num_ports; ++i) {
885 priv = usb_get_serial_port_data(serial->port[i]);
886 if (priv) {
887 pl2303_buf_free(priv->buf);
888 kfree(priv);
889 usb_set_serial_port_data(serial->port[i], NULL);
890 }
891 }
892 }
893
894 static void pl2303_update_line_status(struct usb_serial_port *port,
895 unsigned char *data,
896 unsigned int actual_length)
897 {
898
899 struct pl2303_private *priv = usb_get_serial_port_data(port);
900 unsigned long flags;
901 u8 status_idx = UART_STATE;
902 u8 length = UART_STATE + 1;
903 u16 idv, idp;
904
905 idv = le16_to_cpu(port->serial->dev->descriptor.idVendor);
906 idp = le16_to_cpu(port->serial->dev->descriptor.idProduct);
907
908
909 if (idv == SIEMENS_VENDOR_ID) {
910 if (idp == SIEMENS_PRODUCT_ID_X65 ||
911 idp == SIEMENS_PRODUCT_ID_SX1 ||
912 idp == SIEMENS_PRODUCT_ID_X75) {
913
914 length = 1;
915 status_idx = 0;
916 }
917 }
918
919 if (actual_length < length)
920 return;
921
922 /* Save off the uart status for others to look at */
923 spin_lock_irqsave(&priv->lock, flags);
924 priv->line_status = data[status_idx];
925 spin_unlock_irqrestore(&priv->lock, flags);
926 wake_up_interruptible(&priv->delta_msr_wait);
927 }
928
929 static void pl2303_read_int_callback(struct urb *urb)
930 {
931 struct usb_serial_port *port = (struct usb_serial_port *) urb->context;
932 unsigned char *data = urb->transfer_buffer;
933 unsigned int actual_length = urb->actual_length;
934 int status = urb->status;
935 int retval;
936
937 dbg("%s (%d)", __FUNCTION__, port->number);
938
939 switch (status) {
940 case 0:
941 /* success */
942 break;
943 case -ECONNRESET:
944 case -ENOENT:
945 case -ESHUTDOWN:
946 /* this urb is terminated, clean up */
947 dbg("%s - urb shutting down with status: %d", __FUNCTION__,
948 status);
949 return;
950 default:
951 dbg("%s - nonzero urb status received: %d", __FUNCTION__,
952 status);
953 goto exit;
954 }
955
956 usb_serial_debug_data(debug, &port->dev, __FUNCTION__,
957 urb->actual_length, urb->transfer_buffer);
958
959 pl2303_update_line_status(port, data, actual_length);
960
961 exit:
962 retval = usb_submit_urb(urb, GFP_ATOMIC);
963 if (retval)
964 dev_err(&urb->dev->dev,
965 "%s - usb_submit_urb failed with result %d\n",
966 __FUNCTION__, retval);
967 }
968
969 static void pl2303_read_bulk_callback(struct urb *urb)
970 {
971 struct usb_serial_port *port = (struct usb_serial_port *) urb->context;
972 struct pl2303_private *priv = usb_get_serial_port_data(port);
973 struct tty_struct *tty;
974 unsigned char *data = urb->transfer_buffer;
975 unsigned long flags;
976 int i;
977 int result;
978 int status = urb->status;
979 u8 line_status;
980 char tty_flag;
981
982 dbg("%s - port %d", __FUNCTION__, port->number);
983
984 if (status) {
985 dbg("%s - urb status = %d", __FUNCTION__, status);
986 if (!port->open_count) {
987 dbg("%s - port is closed, exiting.", __FUNCTION__);
988 return;
989 }
990 if (status == -EPROTO) {
991 /* PL2303 mysteriously fails with -EPROTO reschedule
992 * the read */
993 dbg("%s - caught -EPROTO, resubmitting the urb",
994 __FUNCTION__);
995 urb->dev = port->serial->dev;
996 result = usb_submit_urb(urb, GFP_ATOMIC);
997 if (result)
998 dev_err(&urb->dev->dev, "%s - failed"
999 " resubmitting read urb, error %d\n",
1000 __FUNCTION__, result);
1001 return;
1002 }
1003 dbg("%s - unable to handle the error, exiting.", __FUNCTION__);
1004 return;
1005 }
1006
1007 usb_serial_debug_data(debug, &port->dev, __FUNCTION__,
1008 urb->actual_length, data);
1009
1010 /* get tty_flag from status */
1011 tty_flag = TTY_NORMAL;
1012
1013 spin_lock_irqsave(&priv->lock, flags);
1014 line_status = priv->line_status;
1015 priv->line_status &= ~UART_STATE_TRANSIENT_MASK;
1016 spin_unlock_irqrestore(&priv->lock, flags);
1017 wake_up_interruptible(&priv->delta_msr_wait);
1018
1019 /* break takes precedence over parity, */
1020 /* which takes precedence over framing errors */
1021 if (line_status & UART_BREAK_ERROR )
1022 tty_flag = TTY_BREAK;
1023 else if (line_status & UART_PARITY_ERROR)
1024 tty_flag = TTY_PARITY;
1025 else if (line_status & UART_FRAME_ERROR)
1026 tty_flag = TTY_FRAME;
1027 dbg("%s - tty_flag = %d", __FUNCTION__, tty_flag);
1028
1029 tty = port->tty;
1030 if (tty && urb->actual_length) {
1031 tty_buffer_request_room(tty, urb->actual_length + 1);
1032 /* overrun is special, not associated with a char */
1033 if (line_status & UART_OVERRUN_ERROR)
1034 tty_insert_flip_char(tty, 0, TTY_OVERRUN);
1035 for (i = 0; i < urb->actual_length; ++i)
1036 tty_insert_flip_char(tty, data[i], tty_flag);
1037 tty_flip_buffer_push(tty);
1038 }
1039
1040 /* Schedule the next read _if_ we are still open */
1041 if (port->open_count) {
1042 urb->dev = port->serial->dev;
1043 result = usb_submit_urb(urb, GFP_ATOMIC);
1044 if (result)
1045 dev_err(&urb->dev->dev, "%s - failed resubmitting"
1046 " read urb, error %d\n", __FUNCTION__, result);
1047 }
1048
1049 return;
1050 }
1051
1052 static void pl2303_write_bulk_callback(struct urb *urb)
1053 {
1054 struct usb_serial_port *port = (struct usb_serial_port *) urb->context;
1055 struct pl2303_private *priv = usb_get_serial_port_data(port);
1056 int result;
1057 int status = urb->status;
1058
1059 dbg("%s - port %d", __FUNCTION__, port->number);
1060
1061 switch (status) {
1062 case 0:
1063 /* success */
1064 break;
1065 case -ECONNRESET:
1066 case -ENOENT:
1067 case -ESHUTDOWN:
1068 /* this urb is terminated, clean up */
1069 dbg("%s - urb shutting down with status: %d", __FUNCTION__,
1070 status);
1071 priv->write_urb_in_use = 0;
1072 return;
1073 default:
1074 /* error in the urb, so we have to resubmit it */
1075 dbg("%s - Overflow in write", __FUNCTION__);
1076 dbg("%s - nonzero write bulk status received: %d", __FUNCTION__,
1077 status);
1078 port->write_urb->transfer_buffer_length = 1;
1079 port->write_urb->dev = port->serial->dev;
1080 result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
1081 if (result)
1082 dev_err(&urb->dev->dev, "%s - failed resubmitting write"
1083 " urb, error %d\n", __FUNCTION__, result);
1084 else
1085 return;
1086 }
1087
1088 priv->write_urb_in_use = 0;
1089
1090 /* send any buffered data */
1091 pl2303_send(port);
1092 }
1093
1094 /* All of the device info needed for the PL2303 SIO serial converter */
1095 static struct usb_serial_driver pl2303_device = {
1096 .driver = {
1097 .owner = THIS_MODULE,
1098 .name = "pl2303",
1099 },
1100 .id_table = id_table,
1101 .usb_driver = &pl2303_driver,
1102 .num_interrupt_in = NUM_DONT_CARE,
1103 .num_bulk_in = 1,
1104 .num_bulk_out = 1,
1105 .num_ports = 1,
1106 .open = pl2303_open,
1107 .close = pl2303_close,
1108 .write = pl2303_write,
1109 .ioctl = pl2303_ioctl,
1110 .break_ctl = pl2303_break_ctl,
1111 .set_termios = pl2303_set_termios,
1112 .tiocmget = pl2303_tiocmget,
1113 .tiocmset = pl2303_tiocmset,
1114 .read_bulk_callback = pl2303_read_bulk_callback,
1115 .read_int_callback = pl2303_read_int_callback,
1116 .write_bulk_callback = pl2303_write_bulk_callback,
1117 .write_room = pl2303_write_room,
1118 .chars_in_buffer = pl2303_chars_in_buffer,
1119 .attach = pl2303_startup,
1120 .shutdown = pl2303_shutdown,
1121 };
1122
1123 static int __init pl2303_init(void)
1124 {
1125 int retval;
1126
1127 retval = usb_serial_register(&pl2303_device);
1128 if (retval)
1129 goto failed_usb_serial_register;
1130 retval = usb_register(&pl2303_driver);
1131 if (retval)
1132 goto failed_usb_register;
1133 info(DRIVER_DESC);
1134 return 0;
1135 failed_usb_register:
1136 usb_serial_deregister(&pl2303_device);
1137 failed_usb_serial_register:
1138 return retval;
1139 }
1140
1141 static void __exit pl2303_exit(void)
1142 {
1143 usb_deregister(&pl2303_driver);
1144 usb_serial_deregister(&pl2303_device);
1145 }
1146
1147 module_init(pl2303_init);
1148 module_exit(pl2303_exit);
1149
1150 MODULE_DESCRIPTION(DRIVER_DESC);
1151 MODULE_LICENSE("GPL");
1152
1153 module_param(debug, bool, S_IRUGO | S_IWUSR);
1154 MODULE_PARM_DESC(debug, "Debug enabled or not");
1155
Linux kernel - Deliverables
This page took 0.066705 seconds and 6 git commands to generate.