drivers/usb/serial/spcp8x5.c

   1 /*
   2  * spcp8x5 USB to serial adaptor driver
   3  *
   4  * Copyright (C) 2010 Johan Hovold (jhovold@gmail.com)
   5  * Copyright (C) 2006 Linxb (xubin.lin@worldplus.com.cn)
   6  * Copyright (C) 2006 S1 Corp.
   7  *
   8  * Original driver for 2.6.10 pl2303 driver by
   9  *   Greg Kroah-Hartman (greg@kroah.com)
  10  * Changes for 2.6.20 by Harald Klein <hari@vt100.at>
  11  *
  12  *      This program is free software; you can redistribute it and/or modify
  13  *      it under the terms of the GNU General Public License as published by
  14  *      the Free Software Foundation; either version 2 of the License, or
  15  *      (at your option) any later version.
  16  *
  17  *
  18  */
  19 #include <linux/kernel.h>
  20 #include <linux/errno.h>
  21 #include <linux/init.h>
  22 #include <linux/slab.h>
  23 #include <linux/tty.h>
  24 #include <linux/tty_driver.h>
  25 #include <linux/tty_flip.h>
  26 #include <linux/module.h>
  27 #include <linux/spinlock.h>
  28 #include <linux/usb.h>
  29 #include <linux/usb/serial.h>
  30
  31 #define DRIVER_DESC     "SPCP8x5 USB to serial adaptor driver"
  32
  33 #define SPCP8x5_007_VID         0x04FC
  34 #define SPCP8x5_007_PID         0x0201
  35 #define SPCP8x5_008_VID         0x04fc
  36 #define SPCP8x5_008_PID         0x0235
  37 #define SPCP8x5_PHILIPS_VID     0x0471
  38 #define SPCP8x5_PHILIPS_PID     0x081e
  39 #define SPCP8x5_INTERMATIC_VID  0x04FC
  40 #define SPCP8x5_INTERMATIC_PID  0x0204
  41 #define SPCP8x5_835_VID         0x04fc
  42 #define SPCP8x5_835_PID         0x0231
  43
  44 static const struct usb_device_id id_table[] = {
  45         { USB_DEVICE(SPCP8x5_PHILIPS_VID , SPCP8x5_PHILIPS_PID)},
  46         { USB_DEVICE(SPCP8x5_INTERMATIC_VID, SPCP8x5_INTERMATIC_PID)},
  47         { USB_DEVICE(SPCP8x5_835_VID, SPCP8x5_835_PID)},
  48         { USB_DEVICE(SPCP8x5_008_VID, SPCP8x5_008_PID)},
  49         { USB_DEVICE(SPCP8x5_007_VID, SPCP8x5_007_PID)},
  50         { }                                     /* Terminating entry */
  51 };
  52 MODULE_DEVICE_TABLE(usb, id_table);
  53
  54 struct spcp8x5_usb_ctrl_arg {
  55         u8      type;
  56         u8      cmd;
  57         u8      cmd_type;
  58         u16     value;
  59         u16     index;
  60         u16     length;
  61 };
  62
  63
  64 /* spcp8x5 spec register define */
  65 #define MCR_CONTROL_LINE_RTS            0x02
  66 #define MCR_CONTROL_LINE_DTR            0x01
  67 #define MCR_DTR                         0x01
  68 #define MCR_RTS                         0x02
  69
  70 #define MSR_STATUS_LINE_DCD             0x80
  71 #define MSR_STATUS_LINE_RI              0x40
  72 #define MSR_STATUS_LINE_DSR             0x20
  73 #define MSR_STATUS_LINE_CTS             0x10
  74
  75 /* verdor command here , we should define myself */
  76 #define SET_DEFAULT                     0x40
  77 #define SET_DEFAULT_TYPE                0x20
  78
  79 #define SET_UART_FORMAT                 0x40
  80 #define SET_UART_FORMAT_TYPE            0x21
  81 #define SET_UART_FORMAT_SIZE_5          0x00
  82 #define SET_UART_FORMAT_SIZE_6          0x01
  83 #define SET_UART_FORMAT_SIZE_7          0x02
  84 #define SET_UART_FORMAT_SIZE_8          0x03
  85 #define SET_UART_FORMAT_STOP_1          0x00
  86 #define SET_UART_FORMAT_STOP_2          0x04
  87 #define SET_UART_FORMAT_PAR_NONE        0x00
  88 #define SET_UART_FORMAT_PAR_ODD         0x10
  89 #define SET_UART_FORMAT_PAR_EVEN        0x30
  90 #define SET_UART_FORMAT_PAR_MASK        0xD0
  91 #define SET_UART_FORMAT_PAR_SPACE       0x90
  92
  93 #define GET_UART_STATUS_TYPE            0xc0
  94 #define GET_UART_STATUS                 0x22
  95 #define GET_UART_STATUS_MSR             0x06
  96
  97 #define SET_UART_STATUS                 0x40
  98 #define SET_UART_STATUS_TYPE            0x23
  99 #define SET_UART_STATUS_MCR             0x0004
 100 #define SET_UART_STATUS_MCR_DTR         0x01
 101 #define SET_UART_STATUS_MCR_RTS         0x02
 102 #define SET_UART_STATUS_MCR_LOOP        0x10
 103
 104 #define SET_WORKING_MODE                0x40
 105 #define SET_WORKING_MODE_TYPE           0x24
 106 #define SET_WORKING_MODE_U2C            0x00
 107 #define SET_WORKING_MODE_RS485          0x01
 108 #define SET_WORKING_MODE_PDMA           0x02
 109 #define SET_WORKING_MODE_SPP            0x03
 110
 111 #define SET_FLOWCTL_CHAR                0x40
 112 #define SET_FLOWCTL_CHAR_TYPE           0x25
 113
 114 #define GET_VERSION                     0xc0
 115 #define GET_VERSION_TYPE                0x26
 116
 117 #define SET_REGISTER                    0x40
 118 #define SET_REGISTER_TYPE               0x27
 119
 120 #define GET_REGISTER                    0xc0
 121 #define GET_REGISTER_TYPE               0x28
 122
 123 #define SET_RAM                         0x40
 124 #define SET_RAM_TYPE                    0x31
 125
 126 #define GET_RAM                         0xc0
 127 #define GET_RAM_TYPE                    0x32
 128
 129 /* how come ??? */
 130 #define UART_STATE                      0x08
 131 #define UART_STATE_TRANSIENT_MASK       0x75
 132 #define UART_DCD                        0x01
 133 #define UART_DSR                        0x02
 134 #define UART_BREAK_ERROR                0x04
 135 #define UART_RING                       0x08
 136 #define UART_FRAME_ERROR                0x10
 137 #define UART_PARITY_ERROR               0x20
 138 #define UART_OVERRUN_ERROR              0x40
 139 #define UART_CTS                        0x80
 140
 141 enum spcp8x5_type {
 142         SPCP825_007_TYPE,
 143         SPCP825_008_TYPE,
 144         SPCP825_PHILIP_TYPE,
 145         SPCP825_INTERMATIC_TYPE,
 146         SPCP835_TYPE,
 147 };
 148
 149 struct spcp8x5_private {
 150         spinlock_t      lock;
 151         enum spcp8x5_type       type;
 152         u8                      line_control;
 153         u8                      line_status;
 154 };
 155
 156 static int spcp8x5_port_probe(struct usb_serial_port *port)
 157 {
 158         struct usb_serial *serial = port->serial;
 159         struct spcp8x5_private *priv;
 160         enum spcp8x5_type type = SPCP825_007_TYPE;
 161         u16 product = le16_to_cpu(serial->dev->descriptor.idProduct);
 162
 163         if (product == 0x0201)
 164                 type = SPCP825_007_TYPE;
 165         else if (product == 0x0231)
 166                 type = SPCP835_TYPE;
 167         else if (product == 0x0235)
 168                 type = SPCP825_008_TYPE;
 169         else if (product == 0x0204)
 170                 type = SPCP825_INTERMATIC_TYPE;
 171         else if (product == 0x0471 &&
 172                  serial->dev->descriptor.idVendor == cpu_to_le16(0x081e))
 173                 type = SPCP825_PHILIP_TYPE;
 174         dev_dbg(&serial->dev->dev, "device type = %d\n", (int)type);
 175
 176         priv = kzalloc(sizeof(*priv), GFP_KERNEL);
 177         if (!priv)
 178                 return -ENOMEM;
 179
 180         spin_lock_init(&priv->lock);
 181         priv->type = type;
 182
 183         usb_set_serial_port_data(port , priv);
 184
 185         return 0;
 186 }
 187
 188 static int spcp8x5_port_remove(struct usb_serial_port *port)
 189 {
 190         struct spcp8x5_private *priv;
 191
 192         priv = usb_get_serial_port_data(port);
 193         kfree(priv);
 194
 195         return 0;
 196 }
 197
 198 /* set the modem control line of the device.
 199  * NOTE spcp825-007 not supported this */
 200 static int spcp8x5_set_ctrlLine(struct usb_device *dev, u8 value,
 201                                 enum spcp8x5_type type)
 202 {
 203         int retval;
 204         u8 mcr = 0 ;
 205
 206         if (type == SPCP825_007_TYPE)
 207                 return -EPERM;
 208
 209         mcr = (unsigned short)value;
 210         retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 211                                  SET_UART_STATUS_TYPE, SET_UART_STATUS,
 212                                  mcr, 0x04, NULL, 0, 100);
 213         if (retval != 0)
 214                 dev_dbg(&dev->dev, "usb_control_msg return %#x\n", retval);
 215         return retval;
 216 }
 217
 218 /* get the modem status register of the device
 219  * NOTE spcp825-007 not supported this */
 220 static int spcp8x5_get_msr(struct usb_device *dev, u8 *status,
 221                            enum spcp8x5_type type)
 222 {
 223         u8 *status_buffer;
 224         int ret;
 225
 226         /* I return Permited not support here but seem inval device
 227          * is more fix */
 228         if (type == SPCP825_007_TYPE)
 229                 return -EPERM;
 230         if (status == NULL)
 231                 return -EINVAL;
 232
 233         status_buffer = kmalloc(1, GFP_KERNEL);
 234         if (!status_buffer)
 235                 return -ENOMEM;
 236         status_buffer[0] = status[0];
 237
 238         ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
 239                               GET_UART_STATUS, GET_UART_STATUS_TYPE,
 240                               0, GET_UART_STATUS_MSR, status_buffer, 1, 100);
 241         if (ret < 0)
 242                 dev_dbg(&dev->dev, "Get MSR = 0x%p failed (error = %d)",
 243                         status_buffer, ret);
 244
 245         dev_dbg(&dev->dev, "0xc0:0x22:0:6  %d - 0x%p ", ret, status_buffer);
 246         status[0] = status_buffer[0];
 247         kfree(status_buffer);
 248
 249         return ret;
 250 }
 251
 252 /* select the work mode.
 253  * NOTE this function not supported by spcp825-007 */
 254 static void spcp8x5_set_workMode(struct usb_device *dev, u16 value,
 255                                  u16 index, enum spcp8x5_type type)
 256 {
 257         int ret;
 258
 259         /* I return Permited not support here but seem inval device
 260          * is more fix */
 261         if (type == SPCP825_007_TYPE)
 262                 return;
 263
 264         ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 265                               SET_WORKING_MODE_TYPE, SET_WORKING_MODE,
 266                               value, index, NULL, 0, 100);
 267         dev_dbg(&dev->dev, "value = %#x , index = %#x\n", value, index);
 268         if (ret < 0)
 269                 dev_dbg(&dev->dev,
 270                         "RTSCTS usb_control_msg(enable flowctrl) = %d\n", ret);
 271 }
 272
 273 static int spcp8x5_carrier_raised(struct usb_serial_port *port)
 274 {
 275         struct spcp8x5_private *priv = usb_get_serial_port_data(port);
 276         if (priv->line_status & MSR_STATUS_LINE_DCD)
 277                 return 1;
 278         return 0;
 279 }
 280
 281 static void spcp8x5_dtr_rts(struct usb_serial_port *port, int on)
 282 {
 283         struct spcp8x5_private *priv = usb_get_serial_port_data(port);
 284         unsigned long flags;
 285         u8 control;
 286
 287         spin_lock_irqsave(&priv->lock, flags);
 288         if (on)
 289                 priv->line_control = MCR_CONTROL_LINE_DTR
 290                                                 | MCR_CONTROL_LINE_RTS;
 291         else
 292                 priv->line_control &= ~ (MCR_CONTROL_LINE_DTR
 293                                                 | MCR_CONTROL_LINE_RTS);
 294         control = priv->line_control;
 295         spin_unlock_irqrestore(&priv->lock, flags);
 296         spcp8x5_set_ctrlLine(port->serial->dev, control , priv->type);
 297 }
 298
 299 static void spcp8x5_init_termios(struct tty_struct *tty)
 300 {
 301         /* for the 1st time call this function */
 302         tty->termios = tty_std_termios;
 303         tty->termios.c_cflag = B115200 | CS8 | CREAD | HUPCL | CLOCAL;
 304         tty->termios.c_ispeed = 115200;
 305         tty->termios.c_ospeed = 115200;
 306 }
 307
 308 /* set the serial param for transfer. we should check if we really need to
 309  * transfer. if we set flow control we should do this too. */
 310 static void spcp8x5_set_termios(struct tty_struct *tty,
 311                 struct usb_serial_port *port, struct ktermios *old_termios)
 312 {
 313         struct usb_serial *serial = port->serial;
 314         struct spcp8x5_private *priv = usb_get_serial_port_data(port);
 315         unsigned long flags;
 316         unsigned int cflag = tty->termios.c_cflag;
 317         unsigned int old_cflag = old_termios->c_cflag;
 318         unsigned short uartdata;
 319         unsigned char buf[2] = {0, 0};
 320         int baud;
 321         int i;
 322         u8 control;
 323
 324
 325         /* check that they really want us to change something */
 326         if (!tty_termios_hw_change(&tty->termios, old_termios))
 327                 return;
 328
 329         /* set DTR/RTS active */
 330         spin_lock_irqsave(&priv->lock, flags);
 331         control = priv->line_control;
 332         if ((old_cflag & CBAUD) == B0) {
 333                 priv->line_control |= MCR_DTR;
 334                 if (!(old_cflag & CRTSCTS))
 335                         priv->line_control |= MCR_RTS;
 336         }
 337         if (control != priv->line_control) {
 338                 control = priv->line_control;
 339                 spin_unlock_irqrestore(&priv->lock, flags);
 340                 spcp8x5_set_ctrlLine(serial->dev, control , priv->type);
 341         } else {
 342                 spin_unlock_irqrestore(&priv->lock, flags);
 343         }
 344
 345         /* Set Baud Rate */
 346         baud = tty_get_baud_rate(tty);
 347         switch (baud) {
 348         case 300:       buf[0] = 0x00;  break;
 349         case 600:       buf[0] = 0x01;  break;
 350         case 1200:      buf[0] = 0x02;  break;
 351         case 2400:      buf[0] = 0x03;  break;
 352         case 4800:      buf[0] = 0x04;  break;
 353         case 9600:      buf[0] = 0x05;  break;
 354         case 19200:     buf[0] = 0x07;  break;
 355         case 38400:     buf[0] = 0x09;  break;
 356         case 57600:     buf[0] = 0x0a;  break;
 357         case 115200:    buf[0] = 0x0b;  break;
 358         case 230400:    buf[0] = 0x0c;  break;
 359         case 460800:    buf[0] = 0x0d;  break;
 360         case 921600:    buf[0] = 0x0e;  break;
 361 /*      case 1200000:   buf[0] = 0x0f;  break; */
 362 /*      case 2400000:   buf[0] = 0x10;  break; */
 363         case 3000000:   buf[0] = 0x11;  break;
 364 /*      case 6000000:   buf[0] = 0x12;  break; */
 365         case 0:
 366         case 1000000:
 367                         buf[0] = 0x0b;  break;
 368         default:
 369                 dev_err(&port->dev, "spcp825 driver does not support the "
 370                         "baudrate requested, using default of 9600.\n");
 371         }
 372
 373         /* Set Data Length : 00:5bit, 01:6bit, 10:7bit, 11:8bit */
 374         if (cflag & CSIZE) {
 375                 switch (cflag & CSIZE) {
 376                 case CS5:
 377                         buf[1] |= SET_UART_FORMAT_SIZE_5;
 378                         break;
 379                 case CS6:
 380                         buf[1] |= SET_UART_FORMAT_SIZE_6;
 381                         break;
 382                 case CS7:
 383                         buf[1] |= SET_UART_FORMAT_SIZE_7;
 384                         break;
 385                 default:
 386                 case CS8:
 387                         buf[1] |= SET_UART_FORMAT_SIZE_8;
 388                         break;
 389                 }
 390         }
 391
 392         /* Set Stop bit2 : 0:1bit 1:2bit */
 393         buf[1] |= (cflag & CSTOPB) ? SET_UART_FORMAT_STOP_2 :
 394                                      SET_UART_FORMAT_STOP_1;
 395
 396         /* Set Parity bit3-4 01:Odd 11:Even */
 397         if (cflag & PARENB) {
 398                 buf[1] |= (cflag & PARODD) ?
 399                 SET_UART_FORMAT_PAR_ODD : SET_UART_FORMAT_PAR_EVEN ;
 400         } else
 401                 buf[1] |= SET_UART_FORMAT_PAR_NONE;
 402
 403         uartdata = buf[0] | buf[1]<<8;
 404
 405         i = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
 406                             SET_UART_FORMAT_TYPE, SET_UART_FORMAT,
 407                             uartdata, 0, NULL, 0, 100);
 408         if (i < 0)
 409                 dev_err(&port->dev, "Set UART format %#x failed (error = %d)\n",
 410                         uartdata, i);
 411         dev_dbg(&port->dev, "0x21:0x40:0:0  %d\n", i);
 412
 413         if (cflag & CRTSCTS) {
 414                 /* enable hardware flow control */
 415                 spcp8x5_set_workMode(serial->dev, 0x000a,
 416                                      SET_WORKING_MODE_U2C, priv->type);
 417         }
 418 }
 419
 420 /* open the serial port. do some usb system call. set termios and get the line
 421  * status of the device. */
 422 static int spcp8x5_open(struct tty_struct *tty, struct usb_serial_port *port)
 423 {
 424         struct ktermios tmp_termios;
 425         struct usb_serial *serial = port->serial;
 426         struct spcp8x5_private *priv = usb_get_serial_port_data(port);
 427         int ret;
 428         unsigned long flags;
 429         u8 status = 0x30;
 430         /* status 0x30 means DSR and CTS = 1 other CDC RI and delta = 0 */
 431
 432         usb_clear_halt(serial->dev, port->write_urb->pipe);
 433         usb_clear_halt(serial->dev, port->read_urb->pipe);
 434
 435         ret = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
 436                               0x09, 0x00,
 437                               0x01, 0x00, NULL, 0x00, 100);
 438         if (ret)
 439                 return ret;
 440
 441         spcp8x5_set_ctrlLine(serial->dev, priv->line_control , priv->type);
 442
 443         /* Setup termios */
 444         if (tty)
 445                 spcp8x5_set_termios(tty, port, &tmp_termios);
 446
 447         spcp8x5_get_msr(serial->dev, &status, priv->type);
 448
 449         /* may be we should update uart status here but now we did not do */
 450         spin_lock_irqsave(&priv->lock, flags);
 451         priv->line_status = status & 0xf0 ;
 452         spin_unlock_irqrestore(&priv->lock, flags);
 453
 454         port->port.drain_delay = 256;
 455
 456         return usb_serial_generic_open(tty, port);
 457 }
 458
 459 static void spcp8x5_process_read_urb(struct urb *urb)
 460 {
 461         struct usb_serial_port *port = urb->context;
 462         struct spcp8x5_private *priv = usb_get_serial_port_data(port);
 463         unsigned char *data = urb->transfer_buffer;
 464         unsigned long flags;
 465         u8 status;
 466         char tty_flag;
 467
 468         /* get tty_flag from status */
 469         tty_flag = TTY_NORMAL;
 470
 471         spin_lock_irqsave(&priv->lock, flags);
 472         status = priv->line_status;
 473         priv->line_status &= ~UART_STATE_TRANSIENT_MASK;
 474         spin_unlock_irqrestore(&priv->lock, flags);
 475
 476         if (!urb->actual_length)
 477                 return;
 478
 479
 480         if (status & UART_STATE_TRANSIENT_MASK) {
 481                 /* break takes precedence over parity, which takes precedence
 482                  * over framing errors */
 483                 if (status & UART_BREAK_ERROR)
 484                         tty_flag = TTY_BREAK;
 485                 else if (status & UART_PARITY_ERROR)
 486                         tty_flag = TTY_PARITY;
 487                 else if (status & UART_FRAME_ERROR)
 488                         tty_flag = TTY_FRAME;
 489                 dev_dbg(&port->dev, "tty_flag = %d\n", tty_flag);
 490
 491                 /* overrun is special, not associated with a char */
 492                 if (status & UART_OVERRUN_ERROR)
 493                         tty_insert_flip_char(&port->port, 0, TTY_OVERRUN);
 494
 495                 if (status & UART_DCD) {
 496                         struct tty_struct *tty = tty_port_tty_get(&port->port);
 497                         if (tty) {
 498                                 usb_serial_handle_dcd_change(port, tty,
 499                                        priv->line_status & MSR_STATUS_LINE_DCD);
 500                                 tty_kref_put(tty);
 501                         }
 502                 }
 503         }
 504
 505         tty_insert_flip_string_fixed_flag(&port->port, data, tty_flag,
 506                                                         urb->actual_length);
 507         tty_flip_buffer_push(&port->port);
 508 }
 509
 510 static int spcp8x5_tiocmset(struct tty_struct *tty,
 511                             unsigned int set, unsigned int clear)
 512 {
 513         struct usb_serial_port *port = tty->driver_data;
 514         struct spcp8x5_private *priv = usb_get_serial_port_data(port);
 515         unsigned long flags;
 516         u8 control;
 517
 518         spin_lock_irqsave(&priv->lock, flags);
 519         if (set & TIOCM_RTS)
 520                 priv->line_control |= MCR_RTS;
 521         if (set & TIOCM_DTR)
 522                 priv->line_control |= MCR_DTR;
 523         if (clear & TIOCM_RTS)
 524                 priv->line_control &= ~MCR_RTS;
 525         if (clear & TIOCM_DTR)
 526                 priv->line_control &= ~MCR_DTR;
 527         control = priv->line_control;
 528         spin_unlock_irqrestore(&priv->lock, flags);
 529
 530         return spcp8x5_set_ctrlLine(port->serial->dev, control , priv->type);
 531 }
 532
 533 static int spcp8x5_tiocmget(struct tty_struct *tty)
 534 {
 535         struct usb_serial_port *port = tty->driver_data;
 536         struct spcp8x5_private *priv = usb_get_serial_port_data(port);
 537         unsigned long flags;
 538         unsigned int mcr;
 539         unsigned int status;
 540         unsigned int result;
 541
 542         spin_lock_irqsave(&priv->lock, flags);
 543         mcr = priv->line_control;
 544         status = priv->line_status;
 545         spin_unlock_irqrestore(&priv->lock, flags);
 546
 547         result = ((mcr & MCR_DTR)                       ? TIOCM_DTR : 0)
 548                   | ((mcr & MCR_RTS)                    ? TIOCM_RTS : 0)
 549                   | ((status & MSR_STATUS_LINE_CTS)     ? TIOCM_CTS : 0)
 550                   | ((status & MSR_STATUS_LINE_DSR)     ? TIOCM_DSR : 0)
 551                   | ((status & MSR_STATUS_LINE_RI)      ? TIOCM_RI  : 0)
 552                   | ((status & MSR_STATUS_LINE_DCD)     ? TIOCM_CD  : 0);
 553
 554         return result;
 555 }
 556
 557 /* All of the device info needed for the spcp8x5 SIO serial converter */
 558 static struct usb_serial_driver spcp8x5_device = {
 559         .driver = {
 560                 .owner =        THIS_MODULE,
 561                 .name =         "SPCP8x5",
 562         },
 563         .id_table               = id_table,
 564         .num_ports              = 1,
 565         .open                   = spcp8x5_open,
 566         .dtr_rts                = spcp8x5_dtr_rts,
 567         .carrier_raised         = spcp8x5_carrier_raised,
 568         .set_termios            = spcp8x5_set_termios,
 569         .init_termios           = spcp8x5_init_termios,
 570         .tiocmget               = spcp8x5_tiocmget,
 571         .tiocmset               = spcp8x5_tiocmset,
 572         .port_probe             = spcp8x5_port_probe,
 573         .port_remove            = spcp8x5_port_remove,
 574         .process_read_urb       = spcp8x5_process_read_urb,
 575 };
 576
 577 static struct usb_serial_driver * const serial_drivers[] = {
 578         &spcp8x5_device, NULL
 579 };
 580
 581 module_usb_serial_driver(serial_drivers, id_table);
 582
 583 MODULE_DESCRIPTION(DRIVER_DESC);
 584 MODULE_LICENSE("GPL");