projects / deliverable / linux.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
MAINTAINERS: Add phy-miphy28lp.c and phy-miphy365x.c to ARCH/STI architecture
[deliverable/linux.git] / drivers / usb / serial / usb-serial.c
1 /*
2 * USB Serial Converter driver
3 *
4 * Copyright (C) 2009 - 2013 Johan Hovold (jhovold@gmail.com)
5 * Copyright (C) 1999 - 2012 Greg Kroah-Hartman (greg@kroah.com)
6 * Copyright (C) 2000 Peter Berger (pberger@brimson.com)
7 * Copyright (C) 2000 Al Borchers (borchers@steinerpoint.com)
8 *
9 * This program is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License version
11 * 2 as published by the Free Software Foundation.
12 *
13 * This driver was originally based on the ACM driver by Armin Fuerst (which was
14 * based on a driver by Brad Keryan)
15 *
16 * See Documentation/usb/usb-serial.txt for more information on using this
17 * driver
18 */
19
20 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
21
22 #include <linux/kernel.h>
23 #include <linux/errno.h>
24 #include <linux/init.h>
25 #include <linux/slab.h>
26 #include <linux/tty.h>
27 #include <linux/tty_driver.h>
28 #include <linux/tty_flip.h>
29 #include <linux/module.h>
30 #include <linux/moduleparam.h>
31 #include <linux/seq_file.h>
32 #include <linux/spinlock.h>
33 #include <linux/mutex.h>
34 #include <linux/list.h>
35 #include <linux/uaccess.h>
36 #include <linux/serial.h>
37 #include <linux/usb.h>
38 #include <linux/usb/serial.h>
39 #include <linux/kfifo.h>
40 #include <linux/idr.h>
41 #include "pl2303.h"
42
43 #define DRIVER_AUTHOR "Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
44 #define DRIVER_DESC "USB Serial Driver core"
45
46 #define USB_SERIAL_TTY_MAJOR 188
47 #define USB_SERIAL_TTY_MINORS 512 /* should be enough for a while */
48
49 /* There is no MODULE_DEVICE_TABLE for usbserial.c. Instead
50 the MODULE_DEVICE_TABLE declarations in each serial driver
51 cause the "hotplug" program to pull in whatever module is necessary
52 via modprobe, and modprobe will load usbserial because the serial
53 drivers depend on it.
54 */
55
56 static DEFINE_IDR(serial_minors);
57 static DEFINE_MUTEX(table_lock);
58 static LIST_HEAD(usb_serial_driver_list);
59
60 /*
61 * Look up the serial port structure. If it is found and it hasn't been
62 * disconnected, return with the parent usb_serial structure's disc_mutex held
63 * and its refcount incremented. Otherwise return NULL.
64 */
65 struct usb_serial_port *usb_serial_port_get_by_minor(unsigned minor)
66 {
67 struct usb_serial *serial;
68 struct usb_serial_port *port;
69
70 mutex_lock(&table_lock);
71 port = idr_find(&serial_minors, minor);
72 if (!port)
73 goto exit;
74
75 serial = port->serial;
76 mutex_lock(&serial->disc_mutex);
77 if (serial->disconnected) {
78 mutex_unlock(&serial->disc_mutex);
79 port = NULL;
80 } else {
81 kref_get(&serial->kref);
82 }
83 exit:
84 mutex_unlock(&table_lock);
85 return port;
86 }
87
88 static int allocate_minors(struct usb_serial *serial, int num_ports)
89 {
90 struct usb_serial_port *port;
91 unsigned int i, j;
92 int minor;
93
94 dev_dbg(&serial->interface->dev, "%s %d\n", __func__, num_ports);
95
96 mutex_lock(&table_lock);
97 for (i = 0; i < num_ports; ++i) {
98 port = serial->port[i];
99 minor = idr_alloc(&serial_minors, port, 0, 0, GFP_KERNEL);
100 if (minor < 0)
101 goto error;
102 port->minor = minor;
103 port->port_number = i;
104 }
105 serial->minors_reserved = 1;
106 mutex_unlock(&table_lock);
107 return 0;
108 error:
109 /* unwind the already allocated minors */
110 for (j = 0; j < i; ++j)
111 idr_remove(&serial_minors, serial->port[j]->minor);
112 mutex_unlock(&table_lock);
113 return minor;
114 }
115
116 static void release_minors(struct usb_serial *serial)
117 {
118 int i;
119
120 mutex_lock(&table_lock);
121 for (i = 0; i < serial->num_ports; ++i)
122 idr_remove(&serial_minors, serial->port[i]->minor);
123 mutex_unlock(&table_lock);
124 serial->minors_reserved = 0;
125 }
126
127 static void destroy_serial(struct kref *kref)
128 {
129 struct usb_serial *serial;
130 struct usb_serial_port *port;
131 int i;
132
133 serial = to_usb_serial(kref);
134
135 /* return the minor range that this device had */
136 if (serial->minors_reserved)
137 release_minors(serial);
138
139 if (serial->attached && serial->type->release)
140 serial->type->release(serial);
141
142 /* Now that nothing is using the ports, they can be freed */
143 for (i = 0; i < serial->num_port_pointers; ++i) {
144 port = serial->port[i];
145 if (port) {
146 port->serial = NULL;
147 put_device(&port->dev);
148 }
149 }
150
151 usb_put_intf(serial->interface);
152 usb_put_dev(serial->dev);
153 kfree(serial);
154 }
155
156 void usb_serial_put(struct usb_serial *serial)
157 {
158 kref_put(&serial->kref, destroy_serial);
159 }
160
161 /*****************************************************************************
162 * Driver tty interface functions
163 *****************************************************************************/
164
165 /**
166 * serial_install - install tty
167 * @driver: the driver (USB in our case)
168 * @tty: the tty being created
169 *
170 * Create the termios objects for this tty. We use the default
171 * USB serial settings but permit them to be overridden by
172 * serial->type->init_termios.
173 *
174 * This is the first place a new tty gets used. Hence this is where we
175 * acquire references to the usb_serial structure and the driver module,
176 * where we store a pointer to the port, and where we do an autoresume.
177 * All these actions are reversed in serial_cleanup().
178 */
179 static int serial_install(struct tty_driver *driver, struct tty_struct *tty)
180 {
181 int idx = tty->index;
182 struct usb_serial *serial;
183 struct usb_serial_port *port;
184 int retval = -ENODEV;
185
186 port = usb_serial_port_get_by_minor(idx);
187 if (!port)
188 return retval;
189
190 serial = port->serial;
191 if (!try_module_get(serial->type->driver.owner))
192 goto error_module_get;
193
194 retval = usb_autopm_get_interface(serial->interface);
195 if (retval)
196 goto error_get_interface;
197
198 retval = tty_port_install(&port->port, driver, tty);
199 if (retval)
200 goto error_init_termios;
201
202 mutex_unlock(&serial->disc_mutex);
203
204 /* allow the driver to update the settings */
205 if (serial->type->init_termios)
206 serial->type->init_termios(tty);
207
208 tty->driver_data = port;
209
210 return retval;
211
212 error_init_termios:
213 usb_autopm_put_interface(serial->interface);
214 error_get_interface:
215 module_put(serial->type->driver.owner);
216 error_module_get:
217 usb_serial_put(serial);
218 mutex_unlock(&serial->disc_mutex);
219 return retval;
220 }
221
222 static int serial_port_activate(struct tty_port *tport, struct tty_struct *tty)
223 {
224 struct usb_serial_port *port =
225 container_of(tport, struct usb_serial_port, port);
226 struct usb_serial *serial = port->serial;
227 int retval;
228
229 mutex_lock(&serial->disc_mutex);
230 if (serial->disconnected)
231 retval = -ENODEV;
232 else
233 retval = port->serial->type->open(tty, port);
234 mutex_unlock(&serial->disc_mutex);
235
236 if (retval < 0)
237 retval = usb_translate_errors(retval);
238
239 return retval;
240 }
241
242 static int serial_open(struct tty_struct *tty, struct file *filp)
243 {
244 struct usb_serial_port *port = tty->driver_data;
245
246 dev_dbg(tty->dev, "%s\n", __func__);
247
248 return tty_port_open(&port->port, tty, filp);
249 }
250
251 /**
252 * serial_port_shutdown - shut down hardware
253 * @tport: tty port to shut down
254 *
255 * Shut down a USB serial port. Serialized against activate by the
256 * tport mutex and kept to matching open/close pairs
257 * of calls by the ASYNCB_INITIALIZED flag.
258 *
259 * Not called if tty is console.
260 */
261 static void serial_port_shutdown(struct tty_port *tport)
262 {
263 struct usb_serial_port *port =
264 container_of(tport, struct usb_serial_port, port);
265 struct usb_serial_driver *drv = port->serial->type;
266
267 if (drv->close)
268 drv->close(port);
269 }
270
271 static void serial_hangup(struct tty_struct *tty)
272 {
273 struct usb_serial_port *port = tty->driver_data;
274
275 dev_dbg(tty->dev, "%s\n", __func__);
276
277 tty_port_hangup(&port->port);
278 }
279
280 static void serial_close(struct tty_struct *tty, struct file *filp)
281 {
282 struct usb_serial_port *port = tty->driver_data;
283
284 dev_dbg(tty->dev, "%s\n", __func__);
285
286 tty_port_close(&port->port, tty, filp);
287 }
288
289 /**
290 * serial_cleanup - free resources post close/hangup
291 * @port: port to free up
292 *
293 * Do the resource freeing and refcount dropping for the port.
294 * Avoid freeing the console.
295 *
296 * Called asynchronously after the last tty kref is dropped.
297 */
298 static void serial_cleanup(struct tty_struct *tty)
299 {
300 struct usb_serial_port *port = tty->driver_data;
301 struct usb_serial *serial;
302 struct module *owner;
303
304 dev_dbg(tty->dev, "%s\n", __func__);
305
306 /* The console is magical. Do not hang up the console hardware
307 * or there will be tears.
308 */
309 if (port->port.console)
310 return;
311
312 tty->driver_data = NULL;
313
314 serial = port->serial;
315 owner = serial->type->driver.owner;
316
317 mutex_lock(&serial->disc_mutex);
318 if (!serial->disconnected)
319 usb_autopm_put_interface(serial->interface);
320 mutex_unlock(&serial->disc_mutex);
321
322 usb_serial_put(serial);
323 module_put(owner);
324 }
325
326 static int serial_write(struct tty_struct *tty, const unsigned char *buf,
327 int count)
328 {
329 struct usb_serial_port *port = tty->driver_data;
330 int retval = -ENODEV;
331
332 if (port->serial->dev->state == USB_STATE_NOTATTACHED)
333 goto exit;
334
335 dev_dbg(tty->dev, "%s - %d byte(s)\n", __func__, count);
336
337 retval = port->serial->type->write(tty, port, buf, count);
338 if (retval < 0)
339 retval = usb_translate_errors(retval);
340 exit:
341 return retval;
342 }
343
344 static int serial_write_room(struct tty_struct *tty)
345 {
346 struct usb_serial_port *port = tty->driver_data;
347
348 dev_dbg(tty->dev, "%s\n", __func__);
349
350 return port->serial->type->write_room(tty);
351 }
352
353 static int serial_chars_in_buffer(struct tty_struct *tty)
354 {
355 struct usb_serial_port *port = tty->driver_data;
356 struct usb_serial *serial = port->serial;
357
358 dev_dbg(tty->dev, "%s\n", __func__);
359
360 if (serial->disconnected)
361 return 0;
362
363 return serial->type->chars_in_buffer(tty);
364 }
365
366 static void serial_wait_until_sent(struct tty_struct *tty, int timeout)
367 {
368 struct usb_serial_port *port = tty->driver_data;
369 struct usb_serial *serial = port->serial;
370
371 dev_dbg(tty->dev, "%s\n", __func__);
372
373 if (!port->serial->type->wait_until_sent)
374 return;
375
376 mutex_lock(&serial->disc_mutex);
377 if (!serial->disconnected)
378 port->serial->type->wait_until_sent(tty, timeout);
379 mutex_unlock(&serial->disc_mutex);
380 }
381
382 static void serial_throttle(struct tty_struct *tty)
383 {
384 struct usb_serial_port *port = tty->driver_data;
385
386 dev_dbg(tty->dev, "%s\n", __func__);
387
388 if (port->serial->type->throttle)
389 port->serial->type->throttle(tty);
390 }
391
392 static void serial_unthrottle(struct tty_struct *tty)
393 {
394 struct usb_serial_port *port = tty->driver_data;
395
396 dev_dbg(tty->dev, "%s\n", __func__);
397
398 if (port->serial->type->unthrottle)
399 port->serial->type->unthrottle(tty);
400 }
401
402 static int serial_ioctl(struct tty_struct *tty,
403 unsigned int cmd, unsigned long arg)
404 {
405 struct usb_serial_port *port = tty->driver_data;
406 int retval = -ENOIOCTLCMD;
407
408 dev_dbg(tty->dev, "%s - cmd 0x%04x\n", __func__, cmd);
409
410 switch (cmd) {
411 case TIOCMIWAIT:
412 if (port->serial->type->tiocmiwait)
413 retval = port->serial->type->tiocmiwait(tty, arg);
414 break;
415 default:
416 if (port->serial->type->ioctl)
417 retval = port->serial->type->ioctl(tty, cmd, arg);
418 }
419
420 return retval;
421 }
422
423 static void serial_set_termios(struct tty_struct *tty, struct ktermios *old)
424 {
425 struct usb_serial_port *port = tty->driver_data;
426
427 dev_dbg(tty->dev, "%s\n", __func__);
428
429 if (port->serial->type->set_termios)
430 port->serial->type->set_termios(tty, port, old);
431 else
432 tty_termios_copy_hw(&tty->termios, old);
433 }
434
435 static int serial_break(struct tty_struct *tty, int break_state)
436 {
437 struct usb_serial_port *port = tty->driver_data;
438
439 dev_dbg(tty->dev, "%s\n", __func__);
440
441 if (port->serial->type->break_ctl)
442 port->serial->type->break_ctl(tty, break_state);
443
444 return 0;
445 }
446
447 static int serial_proc_show(struct seq_file *m, void *v)
448 {
449 struct usb_serial *serial;
450 struct usb_serial_port *port;
451 int i;
452 char tmp[40];
453
454 seq_puts(m, "usbserinfo:1.0 driver:2.0\n");
455 for (i = 0; i < USB_SERIAL_TTY_MINORS; ++i) {
456 port = usb_serial_port_get_by_minor(i);
457 if (port == NULL)
458 continue;
459 serial = port->serial;
460
461 seq_printf(m, "%d:", i);
462 if (serial->type->driver.owner)
463 seq_printf(m, " module:%s",
464 module_name(serial->type->driver.owner));
465 seq_printf(m, " name:\"%s\"",
466 serial->type->description);
467 seq_printf(m, " vendor:%04x product:%04x",
468 le16_to_cpu(serial->dev->descriptor.idVendor),
469 le16_to_cpu(serial->dev->descriptor.idProduct));
470 seq_printf(m, " num_ports:%d", serial->num_ports);
471 seq_printf(m, " port:%d", port->port_number);
472 usb_make_path(serial->dev, tmp, sizeof(tmp));
473 seq_printf(m, " path:%s", tmp);
474
475 seq_putc(m, '\n');
476 usb_serial_put(serial);
477 mutex_unlock(&serial->disc_mutex);
478 }
479 return 0;
480 }
481
482 static int serial_proc_open(struct inode *inode, struct file *file)
483 {
484 return single_open(file, serial_proc_show, NULL);
485 }
486
487 static const struct file_operations serial_proc_fops = {
488 .owner = THIS_MODULE,
489 .open = serial_proc_open,
490 .read = seq_read,
491 .llseek = seq_lseek,
492 .release = single_release,
493 };
494
495 static int serial_tiocmget(struct tty_struct *tty)
496 {
497 struct usb_serial_port *port = tty->driver_data;
498
499 dev_dbg(tty->dev, "%s\n", __func__);
500
501 if (port->serial->type->tiocmget)
502 return port->serial->type->tiocmget(tty);
503 return -EINVAL;
504 }
505
506 static int serial_tiocmset(struct tty_struct *tty,
507 unsigned int set, unsigned int clear)
508 {
509 struct usb_serial_port *port = tty->driver_data;
510
511 dev_dbg(tty->dev, "%s\n", __func__);
512
513 if (port->serial->type->tiocmset)
514 return port->serial->type->tiocmset(tty, set, clear);
515 return -EINVAL;
516 }
517
518 static int serial_get_icount(struct tty_struct *tty,
519 struct serial_icounter_struct *icount)
520 {
521 struct usb_serial_port *port = tty->driver_data;
522
523 dev_dbg(tty->dev, "%s\n", __func__);
524
525 if (port->serial->type->get_icount)
526 return port->serial->type->get_icount(tty, icount);
527 return -EINVAL;
528 }
529
530 /*
531 * We would be calling tty_wakeup here, but unfortunately some line
532 * disciplines have an annoying habit of calling tty->write from
533 * the write wakeup callback (e.g. n_hdlc.c).
534 */
535 void usb_serial_port_softint(struct usb_serial_port *port)
536 {
537 schedule_work(&port->work);
538 }
539 EXPORT_SYMBOL_GPL(usb_serial_port_softint);
540
541 static void usb_serial_port_work(struct work_struct *work)
542 {
543 struct usb_serial_port *port =
544 container_of(work, struct usb_serial_port, work);
545
546 tty_port_tty_wakeup(&port->port);
547 }
548
549 static void usb_serial_port_poison_urbs(struct usb_serial_port *port)
550 {
551 int i;
552
553 for (i = 0; i < ARRAY_SIZE(port->read_urbs); ++i)
554 usb_poison_urb(port->read_urbs[i]);
555 for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i)
556 usb_poison_urb(port->write_urbs[i]);
557
558 usb_poison_urb(port->interrupt_in_urb);
559 usb_poison_urb(port->interrupt_out_urb);
560 }
561
562 static void usb_serial_port_unpoison_urbs(struct usb_serial_port *port)
563 {
564 int i;
565
566 for (i = 0; i < ARRAY_SIZE(port->read_urbs); ++i)
567 usb_unpoison_urb(port->read_urbs[i]);
568 for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i)
569 usb_unpoison_urb(port->write_urbs[i]);
570
571 usb_unpoison_urb(port->interrupt_in_urb);
572 usb_unpoison_urb(port->interrupt_out_urb);
573 }
574
575 static void usb_serial_port_release(struct device *dev)
576 {
577 struct usb_serial_port *port = to_usb_serial_port(dev);
578 int i;
579
580 dev_dbg(dev, "%s\n", __func__);
581
582 usb_free_urb(port->interrupt_in_urb);
583 usb_free_urb(port->interrupt_out_urb);
584 for (i = 0; i < ARRAY_SIZE(port->read_urbs); ++i) {
585 usb_free_urb(port->read_urbs[i]);
586 kfree(port->bulk_in_buffers[i]);
587 }
588 for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i) {
589 usb_free_urb(port->write_urbs[i]);
590 kfree(port->bulk_out_buffers[i]);
591 }
592 kfifo_free(&port->write_fifo);
593 kfree(port->interrupt_in_buffer);
594 kfree(port->interrupt_out_buffer);
595 tty_port_destroy(&port->port);
596 kfree(port);
597 }
598
599 static struct usb_serial *create_serial(struct usb_device *dev,
600 struct usb_interface *interface,
601 struct usb_serial_driver *driver)
602 {
603 struct usb_serial *serial;
604
605 serial = kzalloc(sizeof(*serial), GFP_KERNEL);
606 if (!serial)
607 return NULL;
608 serial->dev = usb_get_dev(dev);
609 serial->type = driver;
610 serial->interface = usb_get_intf(interface);
611 kref_init(&serial->kref);
612 mutex_init(&serial->disc_mutex);
613 serial->minors_reserved = 0;
614
615 return serial;
616 }
617
618 static const struct usb_device_id *match_dynamic_id(struct usb_interface *intf,
619 struct usb_serial_driver *drv)
620 {
621 struct usb_dynid *dynid;
622
623 spin_lock(&drv->dynids.lock);
624 list_for_each_entry(dynid, &drv->dynids.list, node) {
625 if (usb_match_one_id(intf, &dynid->id)) {
626 spin_unlock(&drv->dynids.lock);
627 return &dynid->id;
628 }
629 }
630 spin_unlock(&drv->dynids.lock);
631 return NULL;
632 }
633
634 static const struct usb_device_id *get_iface_id(struct usb_serial_driver *drv,
635 struct usb_interface *intf)
636 {
637 const struct usb_device_id *id;
638
639 id = usb_match_id(intf, drv->id_table);
640 if (id) {
641 dev_dbg(&intf->dev, "static descriptor matches\n");
642 goto exit;
643 }
644 id = match_dynamic_id(intf, drv);
645 if (id)
646 dev_dbg(&intf->dev, "dynamic descriptor matches\n");
647 exit:
648 return id;
649 }
650
651 /* Caller must hold table_lock */
652 static struct usb_serial_driver *search_serial_device(
653 struct usb_interface *iface)
654 {
655 const struct usb_device_id *id = NULL;
656 struct usb_serial_driver *drv;
657 struct usb_driver *driver = to_usb_driver(iface->dev.driver);
658
659 /* Check if the usb id matches a known device */
660 list_for_each_entry(drv, &usb_serial_driver_list, driver_list) {
661 if (drv->usb_driver == driver)
662 id = get_iface_id(drv, iface);
663 if (id)
664 return drv;
665 }
666
667 return NULL;
668 }
669
670 static int serial_port_carrier_raised(struct tty_port *port)
671 {
672 struct usb_serial_port *p = container_of(port, struct usb_serial_port, port);
673 struct usb_serial_driver *drv = p->serial->type;
674
675 if (drv->carrier_raised)
676 return drv->carrier_raised(p);
677 /* No carrier control - don't block */
678 return 1;
679 }
680
681 static void serial_port_dtr_rts(struct tty_port *port, int on)
682 {
683 struct usb_serial_port *p = container_of(port, struct usb_serial_port, port);
684 struct usb_serial_driver *drv = p->serial->type;
685
686 if (drv->dtr_rts)
687 drv->dtr_rts(p, on);
688 }
689
690 static const struct tty_port_operations serial_port_ops = {
691 .carrier_raised = serial_port_carrier_raised,
692 .dtr_rts = serial_port_dtr_rts,
693 .activate = serial_port_activate,
694 .shutdown = serial_port_shutdown,
695 };
696
697 static int usb_serial_probe(struct usb_interface *interface,
698 const struct usb_device_id *id)
699 {
700 struct device *ddev = &interface->dev;
701 struct usb_device *dev = interface_to_usbdev(interface);
702 struct usb_serial *serial = NULL;
703 struct usb_serial_port *port;
704 struct usb_host_interface *iface_desc;
705 struct usb_endpoint_descriptor *endpoint;
706 struct usb_endpoint_descriptor *interrupt_in_endpoint[MAX_NUM_PORTS];
707 struct usb_endpoint_descriptor *interrupt_out_endpoint[MAX_NUM_PORTS];
708 struct usb_endpoint_descriptor *bulk_in_endpoint[MAX_NUM_PORTS];
709 struct usb_endpoint_descriptor *bulk_out_endpoint[MAX_NUM_PORTS];
710 struct usb_serial_driver *type = NULL;
711 int retval;
712 int buffer_size;
713 int i;
714 int j;
715 int num_interrupt_in = 0;
716 int num_interrupt_out = 0;
717 int num_bulk_in = 0;
718 int num_bulk_out = 0;
719 int num_ports = 0;
720 int max_endpoints;
721
722 mutex_lock(&table_lock);
723 type = search_serial_device(interface);
724 if (!type) {
725 mutex_unlock(&table_lock);
726 dev_dbg(ddev, "none matched\n");
727 return -ENODEV;
728 }
729
730 if (!try_module_get(type->driver.owner)) {
731 mutex_unlock(&table_lock);
732 dev_err(ddev, "module get failed, exiting\n");
733 return -EIO;
734 }
735 mutex_unlock(&table_lock);
736
737 serial = create_serial(dev, interface, type);
738 if (!serial) {
739 module_put(type->driver.owner);
740 return -ENOMEM;
741 }
742
743 /* if this device type has a probe function, call it */
744 if (type->probe) {
745 const struct usb_device_id *id;
746
747 id = get_iface_id(type, interface);
748 retval = type->probe(serial, id);
749
750 if (retval) {
751 dev_dbg(ddev, "sub driver rejected device\n");
752 usb_serial_put(serial);
753 module_put(type->driver.owner);
754 return retval;
755 }
756 }
757
758 /* descriptor matches, let's find the endpoints needed */
759 /* check out the endpoints */
760 iface_desc = interface->cur_altsetting;
761 for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
762 endpoint = &iface_desc->endpoint[i].desc;
763
764 if (usb_endpoint_is_bulk_in(endpoint)) {
765 /* we found a bulk in endpoint */
766 dev_dbg(ddev, "found bulk in on endpoint %d\n", i);
767 if (num_bulk_in < MAX_NUM_PORTS) {
768 bulk_in_endpoint[num_bulk_in] = endpoint;
769 ++num_bulk_in;
770 }
771 }
772
773 if (usb_endpoint_is_bulk_out(endpoint)) {
774 /* we found a bulk out endpoint */
775 dev_dbg(ddev, "found bulk out on endpoint %d\n", i);
776 if (num_bulk_out < MAX_NUM_PORTS) {
777 bulk_out_endpoint[num_bulk_out] = endpoint;
778 ++num_bulk_out;
779 }
780 }
781
782 if (usb_endpoint_is_int_in(endpoint)) {
783 /* we found a interrupt in endpoint */
784 dev_dbg(ddev, "found interrupt in on endpoint %d\n", i);
785 if (num_interrupt_in < MAX_NUM_PORTS) {
786 interrupt_in_endpoint[num_interrupt_in] =
787 endpoint;
788 ++num_interrupt_in;
789 }
790 }
791
792 if (usb_endpoint_is_int_out(endpoint)) {
793 /* we found an interrupt out endpoint */
794 dev_dbg(ddev, "found interrupt out on endpoint %d\n", i);
795 if (num_interrupt_out < MAX_NUM_PORTS) {
796 interrupt_out_endpoint[num_interrupt_out] =
797 endpoint;
798 ++num_interrupt_out;
799 }
800 }
801 }
802
803 #if defined(CONFIG_USB_SERIAL_PL2303) || defined(CONFIG_USB_SERIAL_PL2303_MODULE)
804 /* BEGIN HORRIBLE HACK FOR PL2303 */
805 /* this is needed due to the looney way its endpoints are set up */
806 if (((le16_to_cpu(dev->descriptor.idVendor) == PL2303_VENDOR_ID) &&
807 (le16_to_cpu(dev->descriptor.idProduct) == PL2303_PRODUCT_ID)) ||
808 ((le16_to_cpu(dev->descriptor.idVendor) == ATEN_VENDOR_ID) &&
809 (le16_to_cpu(dev->descriptor.idProduct) == ATEN_PRODUCT_ID)) ||
810 ((le16_to_cpu(dev->descriptor.idVendor) == ALCOR_VENDOR_ID) &&
811 (le16_to_cpu(dev->descriptor.idProduct) == ALCOR_PRODUCT_ID)) ||
812 ((le16_to_cpu(dev->descriptor.idVendor) == SIEMENS_VENDOR_ID) &&
813 (le16_to_cpu(dev->descriptor.idProduct) == SIEMENS_PRODUCT_ID_EF81))) {
814 if (interface != dev->actconfig->interface[0]) {
815 /* check out the endpoints of the other interface*/
816 iface_desc = dev->actconfig->interface[0]->cur_altsetting;
817 for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
818 endpoint = &iface_desc->endpoint[i].desc;
819 if (usb_endpoint_is_int_in(endpoint)) {
820 /* we found a interrupt in endpoint */
821 dev_dbg(ddev, "found interrupt in for Prolific device on separate interface\n");
822 if (num_interrupt_in < MAX_NUM_PORTS) {
823 interrupt_in_endpoint[num_interrupt_in] = endpoint;
824 ++num_interrupt_in;
825 }
826 }
827 }
828 }
829
830 /* Now make sure the PL-2303 is configured correctly.
831 * If not, give up now and hope this hack will work
832 * properly during a later invocation of usb_serial_probe
833 */
834 if (num_bulk_in == 0 || num_bulk_out == 0) {
835 dev_info(ddev, "PL-2303 hack: descriptors matched but endpoints did not\n");
836 usb_serial_put(serial);
837 module_put(type->driver.owner);
838 return -ENODEV;
839 }
840 }
841 /* END HORRIBLE HACK FOR PL2303 */
842 #endif
843
844 #ifdef CONFIG_USB_SERIAL_GENERIC
845 if (type == &usb_serial_generic_device) {
846 num_ports = num_bulk_out;
847 if (num_ports == 0) {
848 dev_err(ddev, "Generic device with no bulk out, not allowed.\n");
849 usb_serial_put(serial);
850 module_put(type->driver.owner);
851 return -EIO;
852 }
853 dev_info(ddev, "The \"generic\" usb-serial driver is only for testing and one-off prototypes.\n");
854 dev_info(ddev, "Tell linux-usb@vger.kernel.org to add your device to a proper driver.\n");
855 }
856 #endif
857 if (!num_ports) {
858 /* if this device type has a calc_num_ports function, call it */
859 if (type->calc_num_ports)
860 num_ports = type->calc_num_ports(serial);
861 if (!num_ports)
862 num_ports = type->num_ports;
863 }
864
865 if (num_ports > MAX_NUM_PORTS) {
866 dev_warn(ddev, "too many ports requested: %d\n", num_ports);
867 num_ports = MAX_NUM_PORTS;
868 }
869
870 serial->num_ports = num_ports;
871 serial->num_bulk_in = num_bulk_in;
872 serial->num_bulk_out = num_bulk_out;
873 serial->num_interrupt_in = num_interrupt_in;
874 serial->num_interrupt_out = num_interrupt_out;
875
876 /* found all that we need */
877 dev_info(ddev, "%s converter detected\n", type->description);
878
879 /* create our ports, we need as many as the max endpoints */
880 /* we don't use num_ports here because some devices have more
881 endpoint pairs than ports */
882 max_endpoints = max(num_bulk_in, num_bulk_out);
883 max_endpoints = max(max_endpoints, num_interrupt_in);
884 max_endpoints = max(max_endpoints, num_interrupt_out);
885 max_endpoints = max(max_endpoints, (int)serial->num_ports);
886 serial->num_port_pointers = max_endpoints;
887
888 dev_dbg(ddev, "setting up %d port structure(s)\n", max_endpoints);
889 for (i = 0; i < max_endpoints; ++i) {
890 port = kzalloc(sizeof(struct usb_serial_port), GFP_KERNEL);
891 if (!port)
892 goto probe_error;
893 tty_port_init(&port->port);
894 port->port.ops = &serial_port_ops;
895 port->serial = serial;
896 spin_lock_init(&port->lock);
897 /* Keep this for private driver use for the moment but
898 should probably go away */
899 INIT_WORK(&port->work, usb_serial_port_work);
900 serial->port[i] = port;
901 port->dev.parent = &interface->dev;
902 port->dev.driver = NULL;
903 port->dev.bus = &usb_serial_bus_type;
904 port->dev.release = &usb_serial_port_release;
905 device_initialize(&port->dev);
906 }
907
908 /* set up the endpoint information */
909 for (i = 0; i < num_bulk_in; ++i) {
910 endpoint = bulk_in_endpoint[i];
911 port = serial->port[i];
912 buffer_size = max_t(int, serial->type->bulk_in_size,
913 usb_endpoint_maxp(endpoint));
914 port->bulk_in_size = buffer_size;
915 port->bulk_in_endpointAddress = endpoint->bEndpointAddress;
916
917 for (j = 0; j < ARRAY_SIZE(port->read_urbs); ++j) {
918 set_bit(j, &port->read_urbs_free);
919 port->read_urbs[j] = usb_alloc_urb(0, GFP_KERNEL);
920 if (!port->read_urbs[j])
921 goto probe_error;
922 port->bulk_in_buffers[j] = kmalloc(buffer_size,
923 GFP_KERNEL);
924 if (!port->bulk_in_buffers[j])
925 goto probe_error;
926 usb_fill_bulk_urb(port->read_urbs[j], dev,
927 usb_rcvbulkpipe(dev,
928 endpoint->bEndpointAddress),
929 port->bulk_in_buffers[j], buffer_size,
930 serial->type->read_bulk_callback,
931 port);
932 }
933
934 port->read_urb = port->read_urbs[0];
935 port->bulk_in_buffer = port->bulk_in_buffers[0];
936 }
937
938 for (i = 0; i < num_bulk_out; ++i) {
939 endpoint = bulk_out_endpoint[i];
940 port = serial->port[i];
941 if (kfifo_alloc(&port->write_fifo, PAGE_SIZE, GFP_KERNEL))
942 goto probe_error;
943 buffer_size = max_t(int, serial->type->bulk_out_size,
944 usb_endpoint_maxp(endpoint));
945 port->bulk_out_size = buffer_size;
946 port->bulk_out_endpointAddress = endpoint->bEndpointAddress;
947
948 for (j = 0; j < ARRAY_SIZE(port->write_urbs); ++j) {
949 set_bit(j, &port->write_urbs_free);
950 port->write_urbs[j] = usb_alloc_urb(0, GFP_KERNEL);
951 if (!port->write_urbs[j])
952 goto probe_error;
953 port->bulk_out_buffers[j] = kmalloc(buffer_size,
954 GFP_KERNEL);
955 if (!port->bulk_out_buffers[j])
956 goto probe_error;
957 usb_fill_bulk_urb(port->write_urbs[j], dev,
958 usb_sndbulkpipe(dev,
959 endpoint->bEndpointAddress),
960 port->bulk_out_buffers[j], buffer_size,
961 serial->type->write_bulk_callback,
962 port);
963 }
964
965 port->write_urb = port->write_urbs[0];
966 port->bulk_out_buffer = port->bulk_out_buffers[0];
967 }
968
969 if (serial->type->read_int_callback) {
970 for (i = 0; i < num_interrupt_in; ++i) {
971 endpoint = interrupt_in_endpoint[i];
972 port = serial->port[i];
973 port->interrupt_in_urb = usb_alloc_urb(0, GFP_KERNEL);
974 if (!port->interrupt_in_urb)
975 goto probe_error;
976 buffer_size = usb_endpoint_maxp(endpoint);
977 port->interrupt_in_endpointAddress =
978 endpoint->bEndpointAddress;
979 port->interrupt_in_buffer = kmalloc(buffer_size,
980 GFP_KERNEL);
981 if (!port->interrupt_in_buffer)
982 goto probe_error;
983 usb_fill_int_urb(port->interrupt_in_urb, dev,
984 usb_rcvintpipe(dev,
985 endpoint->bEndpointAddress),
986 port->interrupt_in_buffer, buffer_size,
987 serial->type->read_int_callback, port,
988 endpoint->bInterval);
989 }
990 } else if (num_interrupt_in) {
991 dev_dbg(ddev, "The device claims to support interrupt in transfers, but read_int_callback is not defined\n");
992 }
993
994 if (serial->type->write_int_callback) {
995 for (i = 0; i < num_interrupt_out; ++i) {
996 endpoint = interrupt_out_endpoint[i];
997 port = serial->port[i];
998 port->interrupt_out_urb = usb_alloc_urb(0, GFP_KERNEL);
999 if (!port->interrupt_out_urb)
1000 goto probe_error;
1001 buffer_size = usb_endpoint_maxp(endpoint);
1002 port->interrupt_out_size = buffer_size;
1003 port->interrupt_out_endpointAddress =
1004 endpoint->bEndpointAddress;
1005 port->interrupt_out_buffer = kmalloc(buffer_size,
1006 GFP_KERNEL);
1007 if (!port->interrupt_out_buffer)
1008 goto probe_error;
1009 usb_fill_int_urb(port->interrupt_out_urb, dev,
1010 usb_sndintpipe(dev,
1011 endpoint->bEndpointAddress),
1012 port->interrupt_out_buffer, buffer_size,
1013 serial->type->write_int_callback, port,
1014 endpoint->bInterval);
1015 }
1016 } else if (num_interrupt_out) {
1017 dev_dbg(ddev, "The device claims to support interrupt out transfers, but write_int_callback is not defined\n");
1018 }
1019
1020 usb_set_intfdata(interface, serial);
1021
1022 /* if this device type has an attach function, call it */
1023 if (type->attach) {
1024 retval = type->attach(serial);
1025 if (retval < 0)
1026 goto probe_error;
1027 serial->attached = 1;
1028 if (retval > 0) {
1029 /* quietly accept this device, but don't bind to a
1030 serial port as it's about to disappear */
1031 serial->num_ports = 0;
1032 goto exit;
1033 }
1034 } else {
1035 serial->attached = 1;
1036 }
1037
1038 /* Avoid race with tty_open and serial_install by setting the
1039 * disconnected flag and not clearing it until all ports have been
1040 * registered.
1041 */
1042 serial->disconnected = 1;
1043
1044 if (allocate_minors(serial, num_ports)) {
1045 dev_err(ddev, "No more free serial minor numbers\n");
1046 goto probe_error;
1047 }
1048
1049 /* register all of the individual ports with the driver core */
1050 for (i = 0; i < num_ports; ++i) {
1051 port = serial->port[i];
1052 dev_set_name(&port->dev, "ttyUSB%d", port->minor);
1053 dev_dbg(ddev, "registering %s\n", dev_name(&port->dev));
1054 device_enable_async_suspend(&port->dev);
1055
1056 retval = device_add(&port->dev);
1057 if (retval)
1058 dev_err(ddev, "Error registering port device, continuing\n");
1059 }
1060
1061 serial->disconnected = 0;
1062
1063 usb_serial_console_init(serial->port[0]->minor);
1064 exit:
1065 module_put(type->driver.owner);
1066 return 0;
1067
1068 probe_error:
1069 usb_serial_put(serial);
1070 module_put(type->driver.owner);
1071 return -EIO;
1072 }
1073
1074 static void usb_serial_disconnect(struct usb_interface *interface)
1075 {
1076 int i;
1077 struct usb_serial *serial = usb_get_intfdata(interface);
1078 struct device *dev = &interface->dev;
1079 struct usb_serial_port *port;
1080 struct tty_struct *tty;
1081
1082 usb_serial_console_disconnect(serial);
1083
1084 mutex_lock(&serial->disc_mutex);
1085 /* must set a flag, to signal subdrivers */
1086 serial->disconnected = 1;
1087 mutex_unlock(&serial->disc_mutex);
1088
1089 for (i = 0; i < serial->num_ports; ++i) {
1090 port = serial->port[i];
1091 tty = tty_port_tty_get(&port->port);
1092 if (tty) {
1093 tty_vhangup(tty);
1094 tty_kref_put(tty);
1095 }
1096 usb_serial_port_poison_urbs(port);
1097 wake_up_interruptible(&port->port.delta_msr_wait);
1098 cancel_work_sync(&port->work);
1099 if (device_is_registered(&port->dev))
1100 device_del(&port->dev);
1101 }
1102 if (serial->type->disconnect)
1103 serial->type->disconnect(serial);
1104
1105 /* let the last holder of this object cause it to be cleaned up */
1106 usb_serial_put(serial);
1107 dev_info(dev, "device disconnected\n");
1108 }
1109
1110 int usb_serial_suspend(struct usb_interface *intf, pm_message_t message)
1111 {
1112 struct usb_serial *serial = usb_get_intfdata(intf);
1113 int i, r = 0;
1114
1115 serial->suspending = 1;
1116
1117 /*
1118 * serial->type->suspend() MUST return 0 in system sleep context,
1119 * otherwise, the resume callback has to recover device from
1120 * previous suspend failure.
1121 */
1122 if (serial->type->suspend) {
1123 r = serial->type->suspend(serial, message);
1124 if (r < 0) {
1125 serial->suspending = 0;
1126 goto err_out;
1127 }
1128 }
1129
1130 for (i = 0; i < serial->num_ports; ++i)
1131 usb_serial_port_poison_urbs(serial->port[i]);
1132 err_out:
1133 return r;
1134 }
1135 EXPORT_SYMBOL(usb_serial_suspend);
1136
1137 static void usb_serial_unpoison_port_urbs(struct usb_serial *serial)
1138 {
1139 int i;
1140
1141 for (i = 0; i < serial->num_ports; ++i)
1142 usb_serial_port_unpoison_urbs(serial->port[i]);
1143 }
1144
1145 int usb_serial_resume(struct usb_interface *intf)
1146 {
1147 struct usb_serial *serial = usb_get_intfdata(intf);
1148 int rv;
1149
1150 usb_serial_unpoison_port_urbs(serial);
1151
1152 serial->suspending = 0;
1153 if (serial->type->resume)
1154 rv = serial->type->resume(serial);
1155 else
1156 rv = usb_serial_generic_resume(serial);
1157
1158 return rv;
1159 }
1160 EXPORT_SYMBOL(usb_serial_resume);
1161
1162 static int usb_serial_reset_resume(struct usb_interface *intf)
1163 {
1164 struct usb_serial *serial = usb_get_intfdata(intf);
1165 int rv;
1166
1167 usb_serial_unpoison_port_urbs(serial);
1168
1169 serial->suspending = 0;
1170 if (serial->type->reset_resume) {
1171 rv = serial->type->reset_resume(serial);
1172 } else {
1173 rv = -EOPNOTSUPP;
1174 intf->needs_binding = 1;
1175 }
1176
1177 return rv;
1178 }
1179
1180 static const struct tty_operations serial_ops = {
1181 .open = serial_open,
1182 .close = serial_close,
1183 .write = serial_write,
1184 .hangup = serial_hangup,
1185 .write_room = serial_write_room,
1186 .ioctl = serial_ioctl,
1187 .set_termios = serial_set_termios,
1188 .throttle = serial_throttle,
1189 .unthrottle = serial_unthrottle,
1190 .break_ctl = serial_break,
1191 .chars_in_buffer = serial_chars_in_buffer,
1192 .wait_until_sent = serial_wait_until_sent,
1193 .tiocmget = serial_tiocmget,
1194 .tiocmset = serial_tiocmset,
1195 .get_icount = serial_get_icount,
1196 .cleanup = serial_cleanup,
1197 .install = serial_install,
1198 .proc_fops = &serial_proc_fops,
1199 };
1200
1201
1202 struct tty_driver *usb_serial_tty_driver;
1203
1204 /* Driver structure we register with the USB core */
1205 static struct usb_driver usb_serial_driver = {
1206 .name = "usbserial",
1207 .probe = usb_serial_probe,
1208 .disconnect = usb_serial_disconnect,
1209 .suspend = usb_serial_suspend,
1210 .resume = usb_serial_resume,
1211 .no_dynamic_id = 1,
1212 .supports_autosuspend = 1,
1213 };
1214
1215 static int __init usb_serial_init(void)
1216 {
1217 int result;
1218
1219 usb_serial_tty_driver = alloc_tty_driver(USB_SERIAL_TTY_MINORS);
1220 if (!usb_serial_tty_driver)
1221 return -ENOMEM;
1222
1223 /* Initialize our global data */
1224 result = bus_register(&usb_serial_bus_type);
1225 if (result) {
1226 pr_err("%s - registering bus driver failed\n", __func__);
1227 goto exit_bus;
1228 }
1229
1230 usb_serial_tty_driver->driver_name = "usbserial";
1231 usb_serial_tty_driver->name = "ttyUSB";
1232 usb_serial_tty_driver->major = USB_SERIAL_TTY_MAJOR;
1233 usb_serial_tty_driver->minor_start = 0;
1234 usb_serial_tty_driver->type = TTY_DRIVER_TYPE_SERIAL;
1235 usb_serial_tty_driver->subtype = SERIAL_TYPE_NORMAL;
1236 usb_serial_tty_driver->flags = TTY_DRIVER_REAL_RAW |
1237 TTY_DRIVER_DYNAMIC_DEV;
1238 usb_serial_tty_driver->init_termios = tty_std_termios;
1239 usb_serial_tty_driver->init_termios.c_cflag = B9600 | CS8 | CREAD
1240 | HUPCL | CLOCAL;
1241 usb_serial_tty_driver->init_termios.c_ispeed = 9600;
1242 usb_serial_tty_driver->init_termios.c_ospeed = 9600;
1243 tty_set_operations(usb_serial_tty_driver, &serial_ops);
1244 result = tty_register_driver(usb_serial_tty_driver);
1245 if (result) {
1246 pr_err("%s - tty_register_driver failed\n", __func__);
1247 goto exit_reg_driver;
1248 }
1249
1250 /* register the USB driver */
1251 result = usb_register(&usb_serial_driver);
1252 if (result < 0) {
1253 pr_err("%s - usb_register failed\n", __func__);
1254 goto exit_tty;
1255 }
1256
1257 /* register the generic driver, if we should */
1258 result = usb_serial_generic_register();
1259 if (result < 0) {
1260 pr_err("%s - registering generic driver failed\n", __func__);
1261 goto exit_generic;
1262 }
1263
1264 return result;
1265
1266 exit_generic:
1267 usb_deregister(&usb_serial_driver);
1268
1269 exit_tty:
1270 tty_unregister_driver(usb_serial_tty_driver);
1271
1272 exit_reg_driver:
1273 bus_unregister(&usb_serial_bus_type);
1274
1275 exit_bus:
1276 pr_err("%s - returning with error %d\n", __func__, result);
1277 put_tty_driver(usb_serial_tty_driver);
1278 return result;
1279 }
1280
1281
1282 static void __exit usb_serial_exit(void)
1283 {
1284 usb_serial_console_exit();
1285
1286 usb_serial_generic_deregister();
1287
1288 usb_deregister(&usb_serial_driver);
1289 tty_unregister_driver(usb_serial_tty_driver);
1290 put_tty_driver(usb_serial_tty_driver);
1291 bus_unregister(&usb_serial_bus_type);
1292 }
1293
1294
1295 module_init(usb_serial_init);
1296 module_exit(usb_serial_exit);
1297
1298 #define set_to_generic_if_null(type, function) \
1299 do { \
1300 if (!type->function) { \
1301 type->function = usb_serial_generic_##function; \
1302 pr_debug("%s: using generic " #function "\n", \
1303 type->driver.name); \
1304 } \
1305 } while (0)
1306
1307 static void usb_serial_operations_init(struct usb_serial_driver *device)
1308 {
1309 set_to_generic_if_null(device, open);
1310 set_to_generic_if_null(device, write);
1311 set_to_generic_if_null(device, close);
1312 set_to_generic_if_null(device, write_room);
1313 set_to_generic_if_null(device, chars_in_buffer);
1314 if (device->tx_empty)
1315 set_to_generic_if_null(device, wait_until_sent);
1316 set_to_generic_if_null(device, read_bulk_callback);
1317 set_to_generic_if_null(device, write_bulk_callback);
1318 set_to_generic_if_null(device, process_read_urb);
1319 set_to_generic_if_null(device, prepare_write_buffer);
1320 }
1321
1322 static int usb_serial_register(struct usb_serial_driver *driver)
1323 {
1324 int retval;
1325
1326 if (usb_disabled())
1327 return -ENODEV;
1328
1329 if (!driver->description)
1330 driver->description = driver->driver.name;
1331 if (!driver->usb_driver) {
1332 WARN(1, "Serial driver %s has no usb_driver\n",
1333 driver->description);
1334 return -EINVAL;
1335 }
1336
1337 usb_serial_operations_init(driver);
1338
1339 /* Add this device to our list of devices */
1340 mutex_lock(&table_lock);
1341 list_add(&driver->driver_list, &usb_serial_driver_list);
1342
1343 retval = usb_serial_bus_register(driver);
1344 if (retval) {
1345 pr_err("problem %d when registering driver %s\n", retval, driver->description);
1346 list_del(&driver->driver_list);
1347 } else {
1348 pr_info("USB Serial support registered for %s\n", driver->description);
1349 }
1350 mutex_unlock(&table_lock);
1351 return retval;
1352 }
1353
1354 static void usb_serial_deregister(struct usb_serial_driver *device)
1355 {
1356 pr_info("USB Serial deregistering driver %s\n", device->description);
1357
1358 mutex_lock(&table_lock);
1359 list_del(&device->driver_list);
1360 mutex_unlock(&table_lock);
1361
1362 usb_serial_bus_deregister(device);
1363 }
1364
1365 /**
1366 * usb_serial_register_drivers - register drivers for a usb-serial module
1367 * @serial_drivers: NULL-terminated array of pointers to drivers to be registered
1368 * @name: name of the usb_driver for this set of @serial_drivers
1369 * @id_table: list of all devices this @serial_drivers set binds to
1370 *
1371 * Registers all the drivers in the @serial_drivers array, and dynamically
1372 * creates a struct usb_driver with the name @name and id_table of @id_table.
1373 */
1374 int usb_serial_register_drivers(struct usb_serial_driver *const serial_drivers[],
1375 const char *name,
1376 const struct usb_device_id *id_table)
1377 {
1378 int rc;
1379 struct usb_driver *udriver;
1380 struct usb_serial_driver * const *sd;
1381
1382 /*
1383 * udriver must be registered before any of the serial drivers,
1384 * because the store_new_id() routine for the serial drivers (in
1385 * bus.c) probes udriver.
1386 *
1387 * Performance hack: We don't want udriver to be probed until
1388 * the serial drivers are registered, because the probe would
1389 * simply fail for lack of a matching serial driver.
1390 * So we leave udriver's id_table set to NULL until we are all set.
1391 *
1392 * Suspend/resume support is implemented in the usb-serial core,
1393 * so fill in the PM-related fields in udriver.
1394 */
1395 udriver = kzalloc(sizeof(*udriver), GFP_KERNEL);
1396 if (!udriver)
1397 return -ENOMEM;
1398
1399 udriver->name = name;
1400 udriver->no_dynamic_id = 1;
1401 udriver->supports_autosuspend = 1;
1402 udriver->suspend = usb_serial_suspend;
1403 udriver->resume = usb_serial_resume;
1404 udriver->probe = usb_serial_probe;
1405 udriver->disconnect = usb_serial_disconnect;
1406
1407 /* we only set the reset_resume field if the serial_driver has one */
1408 for (sd = serial_drivers; *sd; ++sd) {
1409 if ((*sd)->reset_resume) {
1410 udriver->reset_resume = usb_serial_reset_resume;
1411 break;
1412 }
1413 }
1414
1415 rc = usb_register(udriver);
1416 if (rc)
1417 return rc;
1418
1419 for (sd = serial_drivers; *sd; ++sd) {
1420 (*sd)->usb_driver = udriver;
1421 rc = usb_serial_register(*sd);
1422 if (rc)
1423 goto failed;
1424 }
1425
1426 /* Now set udriver's id_table and look for matches */
1427 udriver->id_table = id_table;
1428 rc = driver_attach(&udriver->drvwrap.driver);
1429 return 0;
1430
1431 failed:
1432 while (sd-- > serial_drivers)
1433 usb_serial_deregister(*sd);
1434 usb_deregister(udriver);
1435 return rc;
1436 }
1437 EXPORT_SYMBOL_GPL(usb_serial_register_drivers);
1438
1439 /**
1440 * usb_serial_deregister_drivers - deregister drivers for a usb-serial module
1441 * @serial_drivers: NULL-terminated array of pointers to drivers to be deregistered
1442 *
1443 * Deregisters all the drivers in the @serial_drivers array and deregisters and
1444 * frees the struct usb_driver that was created by the call to
1445 * usb_serial_register_drivers().
1446 */
1447 void usb_serial_deregister_drivers(struct usb_serial_driver *const serial_drivers[])
1448 {
1449 struct usb_driver *udriver = (*serial_drivers)->usb_driver;
1450
1451 for (; *serial_drivers; ++serial_drivers)
1452 usb_serial_deregister(*serial_drivers);
1453 usb_deregister(udriver);
1454 kfree(udriver);
1455 }
1456 EXPORT_SYMBOL_GPL(usb_serial_deregister_drivers);
1457
1458 MODULE_AUTHOR(DRIVER_AUTHOR);
1459 MODULE_DESCRIPTION(DRIVER_DESC);
1460 MODULE_LICENSE("GPL");
Linux kernel - Deliverables
This page took 0.072254 seconds and 5 git commands to generate.