2 # USB Storage driver configuration
5 comment "NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may"
6 comment "also be needed; see USB_STORAGE Help for more info"
10 tristate "USB Mass Storage support"
11 depends on USB && SCSI
13 Say Y here if you want to connect USB mass storage devices to your
14 computer's USB port. This is the driver you need for USB
15 floppy drives, USB hard disks, USB tape drives, USB CD-ROMs,
16 USB flash devices, and memory sticks, along with
17 similar devices. This driver may also be used for some cameras
20 This option depends on 'SCSI' support being enabled, but you
21 probably also need 'SCSI device support: SCSI disk support'
22 (BLK_DEV_SD) for most USB storage devices.
24 To compile this driver as a module, choose M here: the
25 module will be called usb-storage.
27 config USB_STORAGE_DEBUG
28 bool "USB Mass Storage verbose debug"
29 depends on USB_STORAGE
31 Say Y here in order to have the USB Mass Storage code generate
32 verbose debugging messages.
34 config USB_STORAGE_DATAFAB
35 tristate "Datafab Compact Flash Reader support"
36 depends on USB_STORAGE
38 Support for certain Datafab CompactFlash readers.
39 Datafab has a web page at <http://www.datafabusa.com/>.
41 If this driver is compiled as a module, it will be named ums-datafab.
43 config USB_STORAGE_FREECOM
44 tristate "Freecom USB/ATAPI Bridge support"
45 depends on USB_STORAGE
47 Support for the Freecom USB to IDE/ATAPI adaptor.
48 Freecom has a web page at <http://www.freecom.de/>.
50 If this driver is compiled as a module, it will be named ums-freecom.
52 config USB_STORAGE_ISD200
53 tristate "ISD-200 USB/ATA Bridge support"
54 depends on USB_STORAGE
56 Say Y here if you want to use USB Mass Store devices based
57 on the In-Systems Design ISD-200 USB/ATA bridge.
59 Some of the products that use this chip are:
62 - ISD SmartCable for Storage
63 - Taiwan Skymaster CD530U/DEL-0241 IDE bridge
64 - Sony CRX10U CD-R/RW drive
65 - CyQ've CQ8060A CDRW drive
66 - Planex eXtreme Drive RX-25HU USB-IDE cable (not model RX-25U)
68 If this driver is compiled as a module, it will be named ums-isd200.
70 config USB_STORAGE_USBAT
71 tristate "USBAT/USBAT02-based storage support"
72 depends on USB_STORAGE
74 Say Y here to include additional code to support storage devices
75 based on the SCM/Shuttle USBAT/USBAT02 processors.
77 Devices reported to work with this driver include:
78 - CompactFlash reader included with Kodak DC3800 camera
79 - Dane-Elec Zmate CompactFlash reader
80 - Delkin Efilm reader2
81 - HP 8200e/8210e/8230e CD-Writer Plus drives
83 - Jessops CompactFlash JESDCFRU BLACK
84 - Kingston Technology PCREAD-USB/CF
85 - Maxell UA4 CompactFlash reader
87 - Microtech ZiO! ICS-45 CF2
88 - RCA LYRA MP3 portable
89 - Sandisk ImageMate SDDR-05b
91 If this driver is compiled as a module, it will be named ums-usbat.
93 config USB_STORAGE_SDDR09
94 tristate "SanDisk SDDR-09 (and other SmartMedia, including DPCM) support"
95 depends on USB_STORAGE
97 Say Y here to include additional code to support the Sandisk SDDR-09
98 SmartMedia reader in the USB Mass Storage driver.
99 Also works for the Microtech Zio! CompactFlash/SmartMedia reader.
101 If this driver is compiled as a module, it will be named ums-sddr09.
103 config USB_STORAGE_SDDR55
104 tristate "SanDisk SDDR-55 SmartMedia support"
105 depends on USB_STORAGE
107 Say Y here to include additional code to support the Sandisk SDDR-55
108 SmartMedia reader in the USB Mass Storage driver.
110 If this driver is compiled as a module, it will be named ums-sddr55.
112 config USB_STORAGE_JUMPSHOT
113 bool "Lexar Jumpshot Compact Flash Reader"
114 depends on USB_STORAGE
116 Say Y here to include additional code to support the Lexar Jumpshot
117 USB CompactFlash reader.
119 config USB_STORAGE_ALAUDA
120 bool "Olympus MAUSB-10/Fuji DPC-R1 support"
121 depends on USB_STORAGE
123 Say Y here to include additional code to support the Olympus MAUSB-10
124 and Fujifilm DPC-R1 USB Card reader/writer devices.
126 These devices are based on the Alauda chip and support both
127 XD and SmartMedia cards.
129 config USB_STORAGE_ONETOUCH
130 bool "Support OneTouch Button on Maxtor Hard Drives"
131 depends on USB_STORAGE
132 depends on INPUT=y || INPUT=USB_STORAGE
134 Say Y here to include additional code to support the Maxtor OneTouch
135 USB hard drive's onetouch button.
137 This code registers the button on the front of Maxtor OneTouch USB
138 hard drive's as an input device. An action can be associated with
139 this input in any keybinding software. (e.g. gnome's keyboard short-
142 config USB_STORAGE_KARMA
143 bool "Support for Rio Karma music player"
144 depends on USB_STORAGE
146 Say Y here to include additional code to support the Rio Karma
149 This code places the Rio Karma into mass storage mode, enabling
150 it to be mounted as an ordinary filesystem. Performing an eject
151 on the resulting scsi device node returns the Karma to normal
154 config USB_STORAGE_CYPRESS_ATACB
155 tristate "SAT emulation on Cypress USB/ATA Bridge with ATACB"
156 depends on USB_STORAGE
158 Say Y here if you want to use SAT (ata pass through) on devices based
159 on the Cypress USB/ATA bridge supporting ATACB. This will allow you
160 to use tools to tune and monitor your drive (like hdparm or smartctl).
162 If you say no here your device will still work with the standard usb
165 If this driver is compiled as a module, it will be named ums-cypress.
168 bool "The shared table of common (or usual) storage devices"
171 This module contains a table of common (or usual) devices
172 for usb-storage and ub drivers, and allows to switch binding
173 of these devices without rebuilding modules.
175 Typical syntax of /etc/modprobe.conf is:
177 options libusual bias="ub"