drivers/usb/storage/Kconfig

   1 #
   2 # USB Storage driver configuration
   3 #
   4
   5 comment "NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'"
   6 comment "may also be needed; see USB_STORAGE Help for more information"
   7         depends on USB
   8
   9 config USB_STORAGE
  10         tristate "USB Mass Storage support"
  11         depends on USB
  12         select SCSI
  13         ---help---
  14           Say Y here if you want to connect USB mass storage devices to your
  15           computer's USB port. This is the driver you need for USB
  16           floppy drives, USB hard disks, USB tape drives, USB CD-ROMs,
  17           USB flash devices, and memory sticks, along with
  18           similar devices. This driver may also be used for some cameras
  19           and card readers.
  20
  21           This option 'selects' (turns on, enables) 'SCSI', but you
  22           probably also need 'SCSI device support: SCSI disk support'
  23           (BLK_DEV_SD) for most USB storage devices.
  24
  25           To compile this driver as a module, choose M here: the
  26           module will be called usb-storage.
  27
  28 config USB_STORAGE_DEBUG
  29         bool "USB Mass Storage verbose debug"
  30         depends on USB_STORAGE
  31         help
  32           Say Y here in order to have the USB Mass Storage code generate
  33           verbose debugging messages.
  34
  35 config USB_STORAGE_DATAFAB
  36         bool "Datafab Compact Flash Reader support (EXPERIMENTAL)"
  37         depends on USB_STORAGE && EXPERIMENTAL
  38         help
  39           Support for certain Datafab CompactFlash readers.
  40           Datafab has a web page at <http://www.datafabusa.com/>.
  41
  42 config USB_STORAGE_FREECOM
  43         bool "Freecom USB/ATAPI Bridge support"
  44         depends on USB_STORAGE
  45         help
  46           Support for the Freecom USB to IDE/ATAPI adaptor.
  47           Freecom has a web page at <http://www.freecom.de/>.
  48
  49 config USB_STORAGE_ISD200
  50         bool "ISD-200 USB/ATA Bridge support"
  51         depends on USB_STORAGE && BLK_DEV_IDE
  52         ---help---
  53           Say Y here if you want to use USB Mass Store devices based
  54           on the In-Systems Design ISD-200 USB/ATA bridge.
  55
  56           Some of the products that use this chip are:
  57
  58           - Archos Jukebox 6000
  59           - ISD SmartCable for Storage
  60           - Taiwan Skymaster CD530U/DEL-0241 IDE bridge
  61           - Sony CRX10U CD-R/RW drive
  62           - CyQ've CQ8060A CDRW drive
  63           - Planex eXtreme Drive RX-25HU USB-IDE cable (not model RX-25U)
  64
  65 config USB_STORAGE_DPCM
  66         bool "Microtech/ZiO! CompactFlash/SmartMedia support"
  67         depends on USB_STORAGE
  68         help
  69           Say Y here to support the Microtech/ZiO! CompactFlash reader.
  70           There is a web page at <http://www.ziocorp.com/products/>.
  71
  72 config USB_STORAGE_USBAT
  73         bool "USBAT/USBAT02-based storage support (EXPERIMENTAL)"
  74         depends on USB_STORAGE && EXPERIMENTAL
  75         help
  76           Say Y here to include additional code to support storage devices
  77           based on the SCM/Shuttle USBAT/USBAT02 processors.
  78
  79           Devices reported to work with this driver include:
  80           - CompactFlash reader included with Kodak DC3800 camera
  81           - Dane-Elec Zmate CompactFlash reader
  82           - Delkin Efilm reader2
  83           - HP 8200e/8210e/8230e CD-Writer Plus drives
  84           - I-JAM JS-50U
  85           - Jessops CompactFlash JESDCFRU BLACK
  86           - Kingston Technology PCREAD-USB/CF
  87           - Maxell UA4 CompactFlash reader
  88           - Memorex UCF-100
  89           - Microtech ZiO! ICS-45 CF2
  90           - RCA LYRA MP3 portable
  91           - Sandisk ImageMate SDDR-05b
  92
  93 config USB_STORAGE_SDDR09
  94         bool "SanDisk SDDR-09 (and other SmartMedia) support (EXPERIMENTAL)"
  95         depends on USB_STORAGE && EXPERIMENTAL
  96         help
  97           Say Y here to include additional code to support the Sandisk SDDR-09
  98           SmartMedia reader in the USB Mass Storage driver.
  99           Also works for the Microtech Zio! SmartMedia reader.
 100
 101 config USB_STORAGE_SDDR55
 102         bool "SanDisk SDDR-55 SmartMedia support (EXPERIMENTAL)"
 103         depends on USB_STORAGE && EXPERIMENTAL
 104         help
 105           Say Y here to include additional code to support the Sandisk SDDR-55
 106           SmartMedia reader in the USB Mass Storage driver.
 107
 108 config USB_STORAGE_JUMPSHOT
 109         bool "Lexar Jumpshot Compact Flash Reader (EXPERIMENTAL)"
 110         depends on USB_STORAGE && EXPERIMENTAL
 111         help
 112           Say Y here to include additional code to support the Lexar Jumpshot
 113           USB CompactFlash reader.
 114
 115
 116 config USB_STORAGE_ONETOUCH
 117         bool "Support OneTouch Button on Maxtor Hard Drives (EXPERIMENTAL)"
 118         depends on USB_STORAGE && INPUT_EVDEV && EXPERIMENTAL && !PM
 119         help
 120           Say Y here to include additional code to support the Maxtor OneTouch
 121           USB hard drive's onetouch button.
 122
 123           This code registers the button on the front of Maxtor OneTouch USB
 124           hard drive's as an input device. An action can be associated with
 125           this input in any keybinding software. (e.g. gnome's keyboard short-
 126           cuts)
 127
 128 config USB_LIBUSUAL
 129         bool "The shared table of common (or usual) storage devices"
 130         depends on USB
 131         help
 132           This module contains a table of common (or usual) devices
 133           for usb-storage and ub drivers, and allows to switch binding
 134           of these devices without rebuilding modules.
 135
 136           Typical syntax of /etc/modprobe.conf is:
 137
 138                 options libusual bias="ub"
 139
 140           If unsure, say N.