drivers/usb/storage/Kconfig

   1 #
   2 # USB Storage driver configuration
   3 #
   4
   5 comment "NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may"
   6 comment "also be needed; see USB_STORAGE Help for more info"
   7
   8 config USB_STORAGE
   9         tristate "USB Mass Storage support"
  10         depends on SCSI
  11         ---help---
  12           Say Y here if you want to connect USB mass storage devices to your
  13           computer's USB port. This is the driver you need for USB
  14           floppy drives, USB hard disks, USB tape drives, USB CD-ROMs,
  15           USB flash devices, and memory sticks, along with
  16           similar devices. This driver may also be used for some cameras
  17           and card readers.
  18
  19           This option depends on 'SCSI' support being enabled, but you
  20           probably also need 'SCSI device support: SCSI disk support'
  21           (BLK_DEV_SD) for most USB storage devices.
  22
  23           To compile this driver as a module, choose M here: the
  24           module will be called usb-storage.
  25
  26 config USB_STORAGE_DEBUG
  27         bool "USB Mass Storage verbose debug"
  28         depends on USB_STORAGE
  29         help
  30           Say Y here in order to have the USB Mass Storage code generate
  31           verbose debugging messages.
  32
  33 config USB_STORAGE_REALTEK
  34         tristate "Realtek Card Reader support"
  35         depends on USB_STORAGE
  36         help
  37           Say Y here to include additional code to support the power-saving function
  38           for Realtek RTS51xx USB card readers.
  39
  40           If this driver is compiled as a module, it will be named ums-realtek.
  41
  42 config REALTEK_AUTOPM
  43         bool "Realtek Card Reader autosuspend support"
  44         depends on USB_STORAGE_REALTEK && PM
  45         default y
  46
  47 config USB_STORAGE_DATAFAB
  48         tristate "Datafab Compact Flash Reader support"
  49         depends on USB_STORAGE
  50         help
  51           Support for certain Datafab CompactFlash readers.
  52           Datafab has a web page at <http://www.datafab.com/>.
  53
  54           If this driver is compiled as a module, it will be named ums-datafab.
  55
  56 config USB_STORAGE_FREECOM
  57         tristate "Freecom USB/ATAPI Bridge support"
  58         depends on USB_STORAGE
  59         help
  60           Support for the Freecom USB to IDE/ATAPI adaptor.
  61           Freecom has a web page at <http://www.freecom.de/>.
  62
  63           If this driver is compiled as a module, it will be named ums-freecom.
  64
  65 config USB_STORAGE_ISD200
  66         tristate "ISD-200 USB/ATA Bridge support"
  67         depends on USB_STORAGE
  68         ---help---
  69           Say Y here if you want to use USB Mass Store devices based
  70           on the In-Systems Design ISD-200 USB/ATA bridge.
  71
  72           Some of the products that use this chip are:
  73
  74           - Archos Jukebox 6000
  75           - ISD SmartCable for Storage
  76           - Taiwan Skymaster CD530U/DEL-0241 IDE bridge
  77           - Sony CRX10U CD-R/RW drive
  78           - CyQ've CQ8060A CDRW drive
  79           - Planex eXtreme Drive RX-25HU USB-IDE cable (not model RX-25U)
  80
  81           If this driver is compiled as a module, it will be named ums-isd200.
  82
  83 config USB_STORAGE_USBAT
  84         tristate "USBAT/USBAT02-based storage support"
  85         depends on USB_STORAGE
  86         help
  87           Say Y here to include additional code to support storage devices
  88           based on the SCM/Shuttle USBAT/USBAT02 processors.
  89
  90           Devices reported to work with this driver include:
  91           - CompactFlash reader included with Kodak DC3800 camera
  92           - Dane-Elec Zmate CompactFlash reader
  93           - Delkin Efilm reader2
  94           - HP 8200e/8210e/8230e CD-Writer Plus drives
  95           - I-JAM JS-50U
  96           - Jessops CompactFlash JESDCFRU BLACK
  97           - Kingston Technology PCREAD-USB/CF
  98           - Maxell UA4 CompactFlash reader
  99           - Memorex UCF-100
 100           - Microtech ZiO! ICS-45 CF2
 101           - RCA LYRA MP3 portable
 102           - Sandisk ImageMate SDDR-05b
 103
 104           If this driver is compiled as a module, it will be named ums-usbat.
 105
 106 config USB_STORAGE_SDDR09
 107         tristate "SanDisk SDDR-09 (and other SmartMedia, including DPCM) support"
 108         depends on USB_STORAGE
 109         help
 110           Say Y here to include additional code to support the Sandisk SDDR-09
 111           SmartMedia reader in the USB Mass Storage driver.
 112           Also works for the Microtech Zio! CompactFlash/SmartMedia reader.
 113
 114           If this driver is compiled as a module, it will be named ums-sddr09.
 115
 116 config USB_STORAGE_SDDR55
 117         tristate "SanDisk SDDR-55 SmartMedia support"
 118         depends on USB_STORAGE
 119         help
 120           Say Y here to include additional code to support the Sandisk SDDR-55
 121           SmartMedia reader in the USB Mass Storage driver.
 122
 123           If this driver is compiled as a module, it will be named ums-sddr55.
 124
 125 config USB_STORAGE_JUMPSHOT
 126         tristate "Lexar Jumpshot Compact Flash Reader"
 127         depends on USB_STORAGE
 128         help
 129           Say Y here to include additional code to support the Lexar Jumpshot
 130           USB CompactFlash reader.
 131
 132           If this driver is compiled as a module, it will be named ums-jumpshot.
 133
 134 config USB_STORAGE_ALAUDA
 135         tristate "Olympus MAUSB-10/Fuji DPC-R1 support"
 136         depends on USB_STORAGE
 137         help
 138           Say Y here to include additional code to support the Olympus MAUSB-10
 139           and Fujifilm DPC-R1 USB Card reader/writer devices.
 140
 141           These devices are based on the Alauda chip and support both
 142           XD and SmartMedia cards.
 143
 144           If this driver is compiled as a module, it will be named ums-alauda.
 145
 146 config USB_STORAGE_ONETOUCH
 147         tristate "Support OneTouch Button on Maxtor Hard Drives"
 148         depends on USB_STORAGE
 149         depends on INPUT=y || INPUT=USB_STORAGE
 150         help
 151           Say Y here to include additional code to support the Maxtor OneTouch
 152           USB hard drive's onetouch button.
 153
 154           This code registers the button on the front of Maxtor OneTouch USB
 155           hard drive's as an input device. An action can be associated with
 156           this input in any keybinding software. (e.g. gnome's keyboard short-
 157           cuts)
 158
 159           If this driver is compiled as a module, it will be named ums-onetouch.
 160
 161 config USB_STORAGE_KARMA
 162         tristate "Support for Rio Karma music player"
 163         depends on USB_STORAGE
 164         help
 165           Say Y here to include additional code to support the Rio Karma
 166           USB interface.
 167
 168           This code places the Rio Karma into mass storage mode, enabling
 169           it to be mounted as an ordinary filesystem. Performing an eject
 170           on the resulting scsi device node returns the Karma to normal
 171           operation.
 172
 173           If this driver is compiled as a module, it will be named ums-karma.
 174
 175 config USB_STORAGE_CYPRESS_ATACB
 176         tristate "SAT emulation on Cypress USB/ATA Bridge with ATACB"
 177         depends on USB_STORAGE
 178         ---help---
 179           Say Y here if you want to use SAT (ata pass through) on devices based
 180           on the Cypress USB/ATA bridge supporting ATACB. This will allow you
 181           to use tools to tune and monitor your drive (like hdparm or smartctl).
 182
 183           If you say no here your device will still work with the standard usb
 184           mass storage class.
 185
 186           If this driver is compiled as a module, it will be named ums-cypress.
 187
 188 config USB_STORAGE_ENE_UB6250
 189         tristate "USB ENE card reader support"
 190         depends on SCSI
 191         depends on USB_STORAGE
 192         ---help---
 193           Say Y here if you wish to control a ENE SD/MS Card reader.
 194           Note that this driver does not support SM cards.
 195
 196           This option depends on 'SCSI' support being enabled, but you
 197           probably also need 'SCSI device support: SCSI disk support'
 198           (BLK_DEV_SD) for most USB storage devices.
 199
 200           To compile this driver as a module, choose M here: the
 201           module will be called ums-eneub6250.
 202
 203 config USB_UAS
 204         tristate "USB Attached SCSI"
 205         depends on SCSI && USB_STORAGE
 206         help
 207           The USB Attached SCSI protocol is supported by some USB
 208           storage devices.  It permits higher performance by supporting
 209           multiple outstanding commands.
 210
 211           If you don't know whether you have a UAS device, it is safe to
 212           say 'Y' or 'M' here and the kernel will use the right driver.
 213
 214           If you compile this driver as a module, it will be named uas.