drivers/video/Kconfig

   1 #
   2 # Video configuration
   3 #
   4
   5 menu "Graphics support"
   6
   7 config FB
   8         tristate "Support for frame buffer devices"
   9         ---help---
  10           The frame buffer device provides an abstraction for the graphics
  11           hardware. It represents the frame buffer of some video hardware and
  12           allows application software to access the graphics hardware through
  13           a well-defined interface, so the software doesn't need to know
  14           anything about the low-level (hardware register) stuff.
  15
  16           Frame buffer devices work identically across the different
  17           architectures supported by Linux and make the implementation of
  18           application programs easier and more portable; at this point, an X
  19           server exists which uses the frame buffer device exclusively.
  20           On several non-X86 architectures, the frame buffer device is the
  21           only way to use the graphics hardware.
  22
  23           The device is accessed through special device nodes, usually located
  24           in the /dev directory, i.e. /dev/fb*.
  25
  26           You need an utility program called fbset to make full use of frame
  27           buffer devices. Please read <file:Documentation/fb/framebuffer.txt>
  28           and the Framebuffer-HOWTO at
  29           <http://www.tahallah.demon.co.uk/programming/prog.html> for more
  30           information.
  31
  32           Say Y here and to the driver for your graphics board below if you
  33           are compiling a kernel for a non-x86 architecture.
  34
  35           If you are compiling for the x86 architecture, you can say Y if you
  36           want to play with it, but it is not essential. Please note that
  37           running graphical applications that directly touch the hardware
  38           (e.g. an accelerated X server) and that are not frame buffer
  39           device-aware may cause unexpected results. If unsure, say N.
  40
  41 config FB_CFB_FILLRECT
  42         tristate
  43         depends on FB
  44         default n
  45         ---help---
  46           Include the cfb_fillrect function for generic software rectangle
  47           filling. This is used by drivers that don't provide their own
  48           (accelerated) version.
  49
  50 config FB_CFB_COPYAREA
  51         tristate
  52         depends on FB
  53         default n
  54         ---help---
  55           Include the cfb_copyarea function for generic software area copying.
  56           This is used by drivers that don't provide their own (accelerated)
  57           version.
  58
  59 config FB_CFB_IMAGEBLIT
  60         tristate
  61         depends on FB
  62         default n
  63         ---help---
  64           Include the cfb_imageblit function for generic software image
  65           blitting. This is used by drivers that don't provide their own
  66           (accelerated) version.
  67
  68 config FB_SOFT_CURSOR
  69         tristate
  70         depends on FB
  71         default n
  72         ---help---
  73           Include the soft_cursor function for generic software cursor support.
  74           This is used by drivers that don't provide their own (accelerated)
  75           version.
  76
  77 config FB_MACMODES
  78        tristate
  79        depends on FB
  80        default n
  81
  82 config FB_MODE_HELPERS
  83         bool "Enable Video Mode Handling Helpers"
  84         depends on FB
  85         default n
  86         ---help---
  87           This enables functions for handling video modes using the
  88           Generalized Timing Formula and the EDID parser. A few drivers rely
  89           on this feature such as the radeonfb, rivafb, and the i810fb. If
  90           your driver does not take advantage of this feature, choosing Y will
  91           just increase the kernel size by about 5K.
  92
  93 config FB_TILEBLITTING
  94        bool "Enable Tile Blitting Support"
  95        depends on FB
  96        default n
  97        ---help---
  98          This enables tile blitting.  Tile blitting is a drawing technique
  99          where the screen is divided into rectangular sections (tiles), whereas
 100          the standard blitting divides the screen into pixels. Because the
 101          default drawing element is a tile, drawing functions will be passed
 102          parameters in terms of number of tiles instead of number of pixels.
 103          For example, to draw a single character, instead of using bitmaps,
 104          an index to an array of bitmaps will be used.  To clear or move a
 105          rectangular section of a screen, the rectangle will be described in
 106          terms of number of tiles in the x- and y-axis.
 107
 108          This is particularly important to one driver, matroxfb.  If
 109          unsure, say N.
 110
 111 config FB_CIRRUS
 112         tristate "Cirrus Logic support"
 113         depends on FB && (ZORRO || PCI)
 114         select FB_CFB_FILLRECT
 115         select FB_CFB_COPYAREA
 116         select FB_CFB_IMAGEBLIT
 117         select FB_SOFT_CURSOR
 118         ---help---
 119           This enables support for Cirrus Logic GD542x/543x based boards on
 120           Amiga: SD64, Piccolo, Picasso II/II+, Picasso IV, or EGS Spectrum.
 121
 122           If you have a PCI-based system, this enables support for these
 123           chips: GD-543x, GD-544x, GD-5480.
 124
 125           Please read the file <file:Documentation/fb/cirrusfb.txt>.
 126
 127           Say N unless you have such a graphics board or plan to get one
 128           before you next recompile the kernel.
 129
 130 config FB_PM2
 131         tristate "Permedia2 support"
 132         depends on FB && ((AMIGA && BROKEN) || PCI)
 133         select FB_CFB_FILLRECT
 134         select FB_CFB_COPYAREA
 135         select FB_CFB_IMAGEBLIT
 136         select FB_SOFT_CURSOR
 137         help
 138           This is the frame buffer device driver for the Permedia2 AGP frame
 139           buffer card from ASK, aka `Graphic Blaster Exxtreme'.  There is a
 140           product page at
 141           <http://www.ask.com.hk/product/Permedia%202/permedia2.htm>.
 142
 143 config FB_PM2_FIFO_DISCONNECT
 144         bool "enable FIFO disconnect feature"
 145         depends on FB_PM2 && PCI
 146         help
 147           Support the Permedia2 FIFO disconnect feature (see CONFIG_FB_PM2).
 148
 149 config FB_ARMCLCD
 150         tristate "ARM PrimeCell PL110 support"
 151         depends on FB && ARM && ARM_AMBA
 152         select FB_CFB_FILLRECT
 153         select FB_CFB_COPYAREA
 154         select FB_CFB_IMAGEBLIT
 155         select FB_SOFT_CURSOR
 156         help
 157           This framebuffer device driver is for the ARM PrimeCell PL110
 158           Colour LCD controller.  ARM PrimeCells provide the building
 159           blocks for System on a Chip devices.
 160
 161           If you want to compile this as a module (=code which can be
 162           inserted into and removed from the running kernel), say M
 163           here and read <file:Documentation/modules.txt>.  The module
 164           will be called amba-clcd.
 165
 166 config FB_ACORN
 167         bool "Acorn VIDC support"
 168         depends on (FB = y) && ARM && (ARCH_ACORN || ARCH_CLPS7500)
 169         select FB_CFB_FILLRECT
 170         select FB_CFB_COPYAREA
 171         select FB_CFB_IMAGEBLIT
 172         select FB_SOFT_CURSOR
 173         help
 174           This is the frame buffer device driver for the Acorn VIDC graphics
 175           hardware found in Acorn RISC PCs and other ARM-based machines.  If
 176           unsure, say N.
 177
 178 config FB_CLPS711X
 179         bool "CLPS711X LCD support"
 180         depends on (FB = y) && ARM && ARCH_CLPS711X
 181         select FB_CFB_FILLRECT
 182         select FB_CFB_COPYAREA
 183         select FB_CFB_IMAGEBLIT
 184         select FB_SOFT_CURSOR
 185
 186 config FB_SA1100
 187         bool "SA-1100 LCD support"
 188         depends on (FB = y) && ARM && ARCH_SA1100
 189         select FB_CFB_FILLRECT
 190         select FB_CFB_COPYAREA
 191         select FB_CFB_IMAGEBLIT
 192         select FB_SOFT_CURSOR
 193         help
 194           This is a framebuffer device for the SA-1100 LCD Controller.
 195           See <http://www.linux-fbdev.org/> for information on framebuffer
 196           devices.
 197
 198           If you plan to use the LCD display with your SA-1100 system, say
 199           Y here.
 200
 201 config FB_IMX
 202         tristate "Motorola i.MX LCD support"
 203         depends on FB && ARM && ARCH_IMX
 204         select FB_CFB_FILLRECT
 205         select FB_CFB_COPYAREA
 206         select FB_CFB_IMAGEBLIT
 207         select FB_SOFT_CURSOR
 208
 209 config FB_CYBER2000
 210         tristate "CyberPro 2000/2010/5000 support"
 211         depends on FB && PCI && (BROKEN || !SPARC64)
 212         select FB_CFB_FILLRECT
 213         select FB_CFB_COPYAREA
 214         select FB_CFB_IMAGEBLIT
 215         select FB_SOFT_CURSOR
 216         help
 217           This enables support for the Integraphics CyberPro 20x0 and 5000
 218           VGA chips used in the Rebel.com Netwinder and other machines.
 219           Say Y if you have a NetWinder or a graphics card containing this
 220           device, otherwise say N.
 221
 222 config FB_APOLLO
 223         bool
 224         depends on (FB = y) && APOLLO
 225         default y
 226         select FB_CFB_FILLRECT
 227         select FB_CFB_IMAGEBLIT
 228         select FB_SOFT_CURSOR
 229
 230 config FB_Q40
 231         bool
 232         depends on (FB = y) && Q40
 233         default y
 234         select FB_CFB_FILLRECT
 235         select FB_CFB_COPYAREA
 236         select FB_CFB_IMAGEBLIT
 237         select FB_SOFT_CURSOR
 238
 239 config FB_AMIGA
 240         tristate "Amiga native chipset support"
 241         depends on FB && AMIGA
 242         select FB_SOFT_CURSOR
 243         help
 244           This is the frame buffer device driver for the builtin graphics
 245           chipset found in Amigas.
 246
 247           To compile this driver as a module, choose M here: the
 248           module will be called amifb.
 249
 250 config FB_AMIGA_OCS
 251         bool "Amiga OCS chipset support"
 252         depends on FB_AMIGA
 253         help
 254           This enables support for the original Agnus and Denise video chips,
 255           found in the Amiga 1000 and most A500's and A2000's. If you intend
 256           to run Linux on any of these systems, say Y; otherwise say N.
 257
 258 config FB_AMIGA_ECS
 259         bool "Amiga ECS chipset support"
 260         depends on FB_AMIGA
 261         help
 262           This enables support for the Enhanced Chip Set, found in later
 263           A500's, later A2000's, the A600, the A3000, the A3000T and CDTV. If
 264           you intend to run Linux on any of these systems, say Y; otherwise
 265           say N.
 266
 267 config FB_AMIGA_AGA
 268         bool "Amiga AGA chipset support"
 269         depends on FB_AMIGA
 270         help
 271           This enables support for the Advanced Graphics Architecture (also
 272           known as the AGA or AA) Chip Set, found in the A1200, A4000, A4000T
 273           and CD32. If you intend to run Linux on any of these systems, say Y;
 274           otherwise say N.
 275
 276 config FB_CYBER
 277         tristate "Amiga CyberVision 64 support"
 278         depends on FB && ZORRO && BROKEN
 279         select FB_CFB_FILLRECT
 280         select FB_CFB_COPYAREA
 281         select FB_CFB_IMAGEBLIT
 282         select FB_SOFT_CURSOR
 283         help
 284           This enables support for the Cybervision 64 graphics card from
 285           Phase5. Please note that its use is not all that intuitive (i.e. if
 286           you have any questions, be sure to ask!). Say N unless you have a
 287           Cybervision 64 or plan to get one before you next recompile the
 288           kernel. Please note that this driver DOES NOT support the
 289           Cybervision 64/3D card, as they use incompatible video chips.
 290
 291 config FB_VIRGE
 292         bool "Amiga CyberVision 64/3D support "
 293         depends on (FB = y) && ZORRO && BROKEN
 294         select FB_CFB_FILLRECT
 295         select FB_CFB_COPYAREA
 296         select FB_CFB_IMAGEBLIT
 297         select FB_SOFT_CURSOR
 298         help
 299           This enables support for the Cybervision 64/3D graphics card from
 300           Phase5. Please note that its use is not all that intuitive (i.e. if
 301           you have any questions, be sure to ask!). Say N unless you have a
 302           Cybervision 64/3D or plan to get one before you next recompile the
 303           kernel. Please note that this driver DOES NOT support the older
 304           Cybervision 64 card, as they use incompatible video chips.
 305
 306 config FB_RETINAZ3
 307         tristate "Amiga Retina Z3 support"
 308         depends on (FB = y) && ZORRO && BROKEN
 309         help
 310           This enables support for the Retina Z3 graphics card. Say N unless
 311           you have a Retina Z3 or plan to get one before you next recompile
 312           the kernel.
 313
 314 config FB_FM2
 315         bool "Amiga FrameMaster II/Rainbow II support"
 316         depends on (FB = y) && ZORRO
 317         select FB_CFB_FILLRECT
 318         select FB_CFB_COPYAREA
 319         select FB_CFB_IMAGEBLIT
 320         select FB_SOFT_CURSOR
 321         help
 322           This is the frame buffer device driver for the Amiga FrameMaster
 323           card from BSC (exhibited 1992 but not shipped as a CBM product).
 324
 325 config FB_ARC
 326         tristate "Arc Monochrome LCD board support"
 327         depends on FB && X86
 328         select FB_CFB_FILLRECT
 329         select FB_CFB_COPYAREA
 330         select FB_CFB_IMAGEBLIT
 331         select FB_SOFT_CURSOR
 332         help
 333           This enables support for the Arc Monochrome LCD board. The board
 334           is based on the KS-108 lcd controller and is typically a matrix
 335           of 2*n chips. This driver was tested with a 128x64 panel. This
 336           driver supports it for use with x86 SBCs through a 16 bit GPIO
 337           interface (8 bit data, 8 bit control). If you anticpate using
 338           this driver, say Y or M; otherwise say N. You must specify the
 339           GPIO IO address to be used for setting control and data.
 340
 341 config FB_ATARI
 342         bool "Atari native chipset support"
 343         depends on (FB = y) && ATARI && BROKEN
 344         help
 345           This is the frame buffer device driver for the builtin graphics
 346           chipset found in Ataris.
 347
 348 config FB_OF
 349         bool "Open Firmware frame buffer device support"
 350         depends on (FB = y) && (PPC64 || PPC_OF)
 351         select FB_CFB_FILLRECT
 352         select FB_CFB_COPYAREA
 353         select FB_CFB_IMAGEBLIT
 354         select FB_SOFT_CURSOR
 355         select FB_MACMODES
 356         help
 357           Say Y if you want support with Open Firmware for your graphics
 358           board.
 359
 360 config FB_CONTROL
 361         bool "Apple \"control\" display support"
 362         depends on (FB = y) && PPC_PMAC
 363         select FB_CFB_FILLRECT
 364         select FB_CFB_COPYAREA
 365         select FB_CFB_IMAGEBLIT
 366         select FB_SOFT_CURSOR
 367         select FB_MACMODES
 368         help
 369           This driver supports a frame buffer for the graphics adapter in the
 370           Power Macintosh 7300 and others.
 371
 372 config FB_PLATINUM
 373         bool "Apple \"platinum\" display support"
 374         depends on (FB = y) && PPC_PMAC
 375         select FB_CFB_FILLRECT
 376         select FB_CFB_COPYAREA
 377         select FB_CFB_IMAGEBLIT
 378         select FB_SOFT_CURSOR
 379         select FB_MACMODES
 380         help
 381           This driver supports a frame buffer for the "platinum" graphics
 382           adapter in some Power Macintoshes.
 383
 384 config FB_VALKYRIE
 385         bool "Apple \"valkyrie\" display support"
 386         depends on (FB = y) && (MAC || PPC_PMAC)
 387         select FB_CFB_FILLRECT
 388         select FB_CFB_COPYAREA
 389         select FB_CFB_IMAGEBLIT
 390         select FB_SOFT_CURSOR
 391         select FB_MACMODES
 392         help
 393           This driver supports a frame buffer for the "valkyrie" graphics
 394           adapter in some Power Macintoshes.
 395
 396 config FB_CT65550
 397         bool "Chips 65550 display support"
 398         depends on (FB = y) && PPC
 399         select FB_CFB_FILLRECT
 400         select FB_CFB_COPYAREA
 401         select FB_CFB_IMAGEBLIT
 402         select FB_SOFT_CURSOR
 403         help
 404           This is the frame buffer device driver for the Chips & Technologies
 405           65550 graphics chip in PowerBooks.
 406
 407 config FB_ASILIANT
 408         bool "Chips 69000 display support"
 409         depends on (FB = y) && PCI
 410         select FB_CFB_FILLRECT
 411         select FB_CFB_COPYAREA
 412         select FB_CFB_IMAGEBLIT
 413         select FB_SOFT_CURSOR
 414
 415 config FB_IMSTT
 416         bool "IMS Twin Turbo display support"
 417         depends on (FB = y) && PCI
 418         select FB_CFB_IMAGEBLIT
 419         select FB_SOFT_CURSOR
 420         select FB_MACMODES if PPC
 421         help
 422           The IMS Twin Turbo is a PCI-based frame buffer card bundled with
 423           many Macintosh and compatible computers.
 424
 425 config FB_S3TRIO
 426         bool "S3 Trio display support"
 427         depends on (FB = y) && PPC && BROKEN
 428         help
 429           If you have a S3 Trio say Y. Say N for S3 Virge.
 430
 431 config FB_VGA16
 432         tristate "VGA 16-color graphics support"
 433         depends on FB && (X86 || PPC)
 434         select FB_CFB_FILLRECT
 435         select FB_CFB_COPYAREA
 436         select FB_CFB_IMAGEBLIT
 437         select FB_SOFT_CURSOR
 438         help
 439           This is the frame buffer device driver for VGA 16 color graphic
 440           cards. Say Y if you have such a card.
 441
 442           To compile this driver as a module, choose M here: the
 443           module will be called vga16fb.
 444
 445 config FB_STI
 446         tristate "HP STI frame buffer device support"
 447         depends on FB && PARISC
 448         select FB_CFB_FILLRECT
 449         select FB_CFB_COPYAREA
 450         select FB_CFB_IMAGEBLIT
 451         select FB_SOFT_CURSOR
 452         default y
 453         ---help---
 454           STI refers to the HP "Standard Text Interface" which is a set of
 455           BIOS routines contained in a ROM chip in HP PA-RISC based machines.
 456           Enabling this option will implement the linux framebuffer device
 457           using calls to the STI BIOS routines for initialisation.
 458
 459           If you enable this option, you will get a planar framebuffer device
 460           /dev/fb which will work on the most common HP graphic cards of the
 461           NGLE family, including the artist chips (in the 7xx and Bxxx series),
 462           HCRX, HCRX24, CRX, CRX24 and VisEG series.
 463
 464           It is safe to enable this option, so you should probably say "Y".
 465
 466 config FB_MAC
 467         bool "Generic Macintosh display support"
 468         depends on (FB = y) && MAC
 469         select FB_CFB_FILLRECT
 470         select FB_CFB_COPYAREA
 471         select FB_CFB_IMAGEBLIT
 472         select FB_SOFT_CURSOR
 473         select FB_MACMODES
 474
 475 #      bool '  Apple DAFB display support' CONFIG_FB_DAFB
 476 config FB_HP300
 477         bool
 478         depends on (FB = y) && HP300
 479         select FB_CFB_FILLRECT
 480         select FB_CFB_IMAGEBLIT
 481         select FB_SOFT_CURSOR
 482         default y
 483
 484 config FB_TGA
 485         tristate "TGA framebuffer support"
 486         depends on FB && ALPHA
 487         select FB_CFB_FILLRECT
 488         select FB_CFB_COPYAREA
 489         select FB_CFB_IMAGEBLIT
 490         select FB_SOFT_CURSOR
 491         help
 492           This is the frame buffer device driver for generic TGA graphic
 493           cards. Say Y if you have one of those.
 494
 495 config FB_VESA
 496         bool "VESA VGA graphics support"
 497         depends on (FB = y) && (X86 || X86_64)
 498         select FB_CFB_FILLRECT
 499         select FB_CFB_COPYAREA
 500         select FB_CFB_IMAGEBLIT
 501         select FB_SOFT_CURSOR
 502         help
 503           This is the frame buffer device driver for generic VESA 2.0
 504           compliant graphic cards. The older VESA 1.2 cards are not supported.
 505           You will get a boot time penguin logo at no additional cost. Please
 506           read <file:Documentation/fb/vesafb.txt>. If unsure, say Y.
 507
 508 config VIDEO_SELECT
 509         bool
 510         depends on FB_VESA
 511         default y
 512
 513 config FB_HGA
 514         tristate "Hercules mono graphics support"
 515         depends on FB && X86
 516         select FB_CFB_FILLRECT
 517         select FB_CFB_COPYAREA
 518         select FB_CFB_IMAGEBLIT
 519         select FB_SOFT_CURSOR
 520         help
 521           Say Y here if you have a Hercules mono graphics card.
 522
 523           To compile this driver as a module, choose M here: the
 524           module will be called hgafb.
 525
 526           As this card technology is 15 years old, most people will answer N
 527           here.
 528
 529 config FB_HGA_ACCEL
 530         bool "Hercules mono Acceleration functions (EXPERIMENTAL)"
 531         depends on FB_HGA && EXPERIMENTAL
 532         ---help---
 533         This will compile the Hercules mono graphics with
 534         acceleration functions.
 535
 536
 537 config VIDEO_SELECT
 538         bool
 539         depends on (FB = y) && X86
 540         default y
 541
 542 config FB_SGIVW
 543         tristate "SGI Visual Workstation framebuffer support"
 544         depends on FB && X86_VISWS
 545         select FB_CFB_FILLRECT
 546         select FB_CFB_COPYAREA
 547         select FB_CFB_IMAGEBLIT
 548         select FB_SOFT_CURSOR
 549         help
 550           SGI Visual Workstation support for framebuffer graphics.
 551
 552 config FB_GBE
 553         bool "SGI Graphics Backend frame buffer support"
 554         depends on (FB = y) && (SGI_IP32 || X86_VISWS)
 555         select FB_CFB_FILLRECT
 556         select FB_CFB_COPYAREA
 557         select FB_CFB_IMAGEBLIT
 558         select FB_SOFT_CURSOR
 559         help
 560           This is the frame buffer device driver for SGI Graphics Backend.
 561           This chip is used in SGI O2 and Visual Workstation 320/540.
 562
 563 config FB_GBE_MEM
 564         int "Video memory size in MB"
 565         depends on FB_GBE
 566         default 8
 567         help
 568           This is the amount of memory reserved for the framebuffer,
 569           which can be any value between 1MB and 8MB.
 570
 571 config BUS_I2C
 572         bool
 573         depends on (FB = y) && VISWS
 574         default y
 575
 576 config FB_SUN3
 577         bool "Sun3 framebuffer support"
 578         depends on (FB = y) && (SUN3 || SUN3X) && BROKEN
 579
 580 config FB_BW2
 581         bool "BWtwo support"
 582         depends on (FB = y) && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
 583         select FB_CFB_FILLRECT
 584         select FB_CFB_COPYAREA
 585         select FB_CFB_IMAGEBLIT
 586         select FB_SOFT_CURSOR
 587         help
 588           This is the frame buffer device driver for the BWtwo frame buffer.
 589
 590 config FB_CG3
 591         bool "CGthree support"
 592         depends on (FB = y) && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
 593         select FB_CFB_COPYAREA
 594         select FB_CFB_IMAGEBLIT
 595         select FB_SOFT_CURSOR
 596         help
 597           This is the frame buffer device driver for the CGthree frame buffer.
 598
 599 config FB_CG6
 600         bool "CGsix (GX,TurboGX) support"
 601         depends on (FB = y) && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
 602         select FB_CFB_COPYAREA
 603         select FB_CFB_IMAGEBLIT
 604         select FB_SOFT_CURSOR
 605         help
 606           This is the frame buffer device driver for the CGsix (GX, TurboGX)
 607           frame buffer.
 608
 609 config FB_PVR2
 610         tristate "NEC PowerVR 2 display support"
 611         depends on FB && SH_DREAMCAST
 612         select FB_CFB_FILLRECT
 613         select FB_CFB_COPYAREA
 614         select FB_CFB_IMAGEBLIT
 615         select FB_SOFT_CURSOR
 616         ---help---
 617           Say Y here if you have a PowerVR 2 card in your box.  If you plan to
 618           run linux on your Dreamcast, you will have to say Y here.
 619           This driver may or may not work on other PowerVR 2 cards, but is
 620           totally untested.  Use at your own risk.  If unsure, say N.
 621
 622           To compile this driver as a module, choose M here: the
 623           module will be called pvr2fb.
 624
 625           You can pass several parameters to the driver at boot time or at
 626           module load time.  The parameters look like "video=pvr2:XXX", where
 627           the meaning of XXX can be found at the end of the main source file
 628           (<file:drivers/video/pvr2fb.c>). Please see the file
 629           <file:Documentation/fb/pvr2fb.txt>.
 630
 631 config FB_EPSON1355
 632         bool "Epson 1355 framebuffer support"
 633         depends on (FB = y) && (SUPERH || ARCH_CEIVA)
 634         select FB_CFB_FILLRECT
 635         select FB_CFB_COPYAREA
 636         select FB_CFB_IMAGEBLIT
 637         select FB_SOFT_CURSOR
 638         help
 639           Build in support for the SED1355 Epson Research Embedded RAMDAC
 640           LCD/CRT Controller (since redesignated as the S1D13505) as a
 641           framebuffer.  Product specs at
 642           <http://www.erd.epson.com/vdc/html/products.htm>.
 643
 644 config FB_NVIDIA
 645         tristate "nVidia Framebuffer Support"
 646         depends on FB && PCI
 647         select I2C_ALGOBIT if FB_NVIDIA_I2C
 648         select I2C if FB_NVIDIA_I2C
 649         select FB_MODE_HELPERS
 650         select FB_CFB_FILLRECT
 651         select FB_CFB_COPYAREA
 652         select FB_CFB_IMAGEBLIT
 653         help
 654           This driver supports graphics boards with the nVidia chips, TNT
 655           and newer. For very old chipsets, such as the RIVA128, then use
 656           the rivafb.
 657           Say Y if you have such a graphics board.
 658
 659           To compile this driver as a module, choose M here: the
 660           module will be called nvidiafb.
 661
 662 config FB_NVIDIA_I2C
 663        bool "Enable DDC Support"
 664        depends on FB_NVIDIA && !PPC_OF
 665        help
 666           This enables I2C support for nVidia Chipsets.  This is used
 667           only for getting EDID information from the attached display
 668           allowing for robust video mode handling and switching.
 669
 670           Because fbdev-2.6 requires that drivers must be able to
 671           independently validate video mode parameters, you should say Y
 672           here.
 673
 674 config FB_RIVA
 675         tristate "nVidia Riva support"
 676         depends on FB && PCI
 677         select I2C_ALGOBIT if FB_RIVA_I2C
 678         select I2C if FB_RIVA_I2C
 679         select FB_MODE_HELPERS
 680         select FB_CFB_FILLRECT
 681         select FB_CFB_COPYAREA
 682         select FB_CFB_IMAGEBLIT
 683         help
 684           This driver supports graphics boards with the nVidia Riva/Geforce
 685           chips.
 686           Say Y if you have such a graphics board.
 687
 688           To compile this driver as a module, choose M here: the
 689           module will be called rivafb.
 690
 691 config FB_RIVA_I2C
 692        bool "Enable DDC Support"
 693        depends on FB_RIVA
 694        help
 695           This enables I2C support for nVidia Chipsets.  This is used
 696           only for getting EDID information from the attached display
 697           allowing for robust video mode handling and switching.
 698
 699           Because fbdev-2.6 requires that drivers must be able to
 700           independently validate video mode parameters, you should say Y
 701           here.
 702
 703 config FB_RIVA_DEBUG
 704         bool "Lots of debug output from Riva(nVidia) driver"
 705         depends on FB_RIVA
 706         default n
 707         help
 708           Say Y here if you want the Riva driver to output all sorts
 709           of debugging informations to provide to the maintainer when
 710           something goes wrong.
 711
 712 config FB_I810
 713         tristate "Intel 810/815 support (EXPERIMENTAL)"
 714         depends on FB && EXPERIMENTAL && PCI && X86 && !X86_64
 715         select AGP
 716         select AGP_INTEL
 717         select FB_MODE_HELPERS
 718         select FB_CFB_FILLRECT
 719         select FB_CFB_COPYAREA
 720         select FB_CFB_IMAGEBLIT
 721         help
 722           This driver supports the on-board graphics built in to the Intel 810
 723           and 815 chipsets.  Say Y if you have and plan to use such a board.
 724
 725           To compile this driver as a module, choose M here: the
 726           module will be called i810fb.
 727
 728           For more information, please read
 729           <file:Documentation/fb/intel810.txt>
 730
 731 config FB_I810_GTF
 732         bool "use VESA Generalized Timing Formula"
 733         depends on FB_I810
 734         help
 735           If you say Y, then the VESA standard, Generalized Timing Formula
 736           or GTF, will be used to calculate the required video timing values
 737           per video mode.  Since the GTF allows nondiscrete timings
 738           (nondiscrete being a range of values as opposed to discrete being a
 739           set of values), you'll be able to use any combination of horizontal
 740           and vertical resolutions, and vertical refresh rates without having
 741           to specify your own timing parameters.  This is especially useful
 742           to maximize the performance of an aging display, or if you just
 743           have a display with nonstandard dimensions. A VESA compliant
 744           monitor is recommended, but can still work with non-compliant ones.
 745           If you need or want this, then select this option. The timings may
 746           not be compliant with Intel's recommended values. Use at your own
 747           risk.
 748
 749           If you say N, the driver will revert to discrete video timings
 750           using a set recommended by Intel in their documentation.
 751
 752           If unsure, say N.
 753
 754 config FB_INTEL
 755         tristate "Intel 830M/845G/852GM/855GM/865G support (EXPERIMENTAL)"
 756         depends on FB && EXPERIMENTAL && PCI && X86 && !X86_64
 757         select AGP
 758         select AGP_INTEL
 759         select FB_MODE_HELPERS
 760         select FB_CFB_FILLRECT
 761         select FB_CFB_COPYAREA
 762         select FB_CFB_IMAGEBLIT
 763         help
 764           This driver supports the on-board graphics built in to the Intel
 765           830M/845G/852GM/855GM/865G chipsets.
 766           Say Y if you have and plan to use such a board.
 767
 768           To compile this driver as a module, choose M here: the
 769           module will be called intelfb.
 770
 771 config FB_INTEL_DEBUG
 772         bool "Intel driver Debug Messages"
 773         depends on FB_INTEL
 774         ---help---
 775           Say Y here if you want the Intel driver to output all sorts
 776           of debugging informations to provide to the maintainer when
 777           something goes wrong.
 778
 779 config FB_MATROX
 780         tristate "Matrox acceleration"
 781         depends on FB && PCI
 782         select FB_CFB_FILLRECT
 783         select FB_CFB_COPYAREA
 784         select FB_CFB_IMAGEBLIT
 785         select FB_SOFT_CURSOR
 786         select FB_TILEBLITTING
 787         select FB_MACMODES if PPC_PMAC
 788         ---help---
 789           Say Y here if you have a Matrox Millennium, Matrox Millennium II,
 790           Matrox Mystique, Matrox Mystique 220, Matrox Productiva G100, Matrox
 791           Mystique G200, Matrox Millennium G200, Matrox Marvel G200 video,
 792           Matrox G400, G450 or G550 card in your box.
 793
 794           To compile this driver as a module, choose M here: the
 795           module will be called matroxfb.
 796
 797           You can pass several parameters to the driver at boot time or at
 798           module load time. The parameters look like "video=matrox:XXX", and
 799           are described in <file:Documentation/fb/matroxfb.txt>.
 800
 801 config FB_MATROX_MILLENIUM
 802         bool "Millennium I/II support"
 803         depends on FB_MATROX
 804         help
 805           Say Y here if you have a Matrox Millennium or Matrox Millennium II
 806           video card. If you select "Advanced lowlevel driver options" below,
 807           you should check 4 bpp packed pixel, 8 bpp packed pixel, 16 bpp
 808           packed pixel, 24 bpp packed pixel and 32 bpp packed pixel. You can
 809           also use font widths different from 8.
 810
 811 config FB_MATROX_MYSTIQUE
 812         bool "Mystique support"
 813         depends on FB_MATROX
 814         help
 815           Say Y here if you have a Matrox Mystique or Matrox Mystique 220
 816           video card. If you select "Advanced lowlevel driver options" below,
 817           you should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp
 818           packed pixel and 32 bpp packed pixel. You can also use font widths
 819           different from 8.
 820
 821 config FB_MATROX_G
 822         bool "G100/G200/G400/G450/G550 support"
 823         depends on FB_MATROX
 824         ---help---
 825           Say Y here if you have a Matrox G100, G200, G400, G450 or G550 based
 826           video card. If you select "Advanced lowlevel driver options", you
 827           should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp packed
 828           pixel and 32 bpp packed pixel. You can also use font widths
 829           different from 8.
 830
 831           If you need support for G400 secondary head, you must first say Y to
 832           "I2C support" in the character devices section, and then to
 833           "Matrox I2C support" and "G400 second head support" here in the
 834           framebuffer section. G450/G550 secondary head and digital output
 835           are supported without additional modules.
 836
 837           The driver starts in monitor mode. You must use the matroxset tool
 838           (available at <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to
 839           swap primary and secondary head outputs, or to change output mode.
 840           Secondary head driver always start in 640x480 resolution and you
 841           must use fbset to change it.
 842
 843           Do not forget that second head supports only 16 and 32 bpp
 844           packed pixels, so it is a good idea to compile them into the kernel
 845           too. You can use only some font widths, as the driver uses generic
 846           painting procedures (the secondary head does not use acceleration
 847           engine).
 848
 849           G450/G550 hardware can display TV picture only from secondary CRTC,
 850           and it performs no scaling, so picture must have 525 or 625 lines.
 851
 852 config FB_MATROX_I2C
 853         tristate "Matrox I2C support"
 854         depends on FB_MATROX && I2C
 855         select I2C_ALGOBIT
 856         ---help---
 857           This drivers creates I2C buses which are needed for accessing the
 858           DDC (I2C) bus present on all Matroxes, an I2C bus which
 859           interconnects Matrox optional devices, like MGA-TVO on G200 and
 860           G400, and the secondary head DDC bus, present on G400 only.
 861
 862           You can say Y or M here if you want to experiment with monitor
 863           detection code. You must say Y or M here if you want to use either
 864           second head of G400 or MGA-TVO on G200 or G400.
 865
 866           If you compile it as module, it will create a module named
 867           i2c-matroxfb.
 868
 869 config FB_MATROX_MAVEN
 870         tristate "G400 second head support"
 871         depends on FB_MATROX_G && FB_MATROX_I2C
 872         ---help---
 873           WARNING !!! This support does not work with G450 !!!
 874
 875           Say Y or M here if you want to use a secondary head (meaning two
 876           monitors in parallel) on G400 or MGA-TVO add-on on G200. Secondary
 877           head is not compatible with accelerated XFree 3.3.x SVGA servers -
 878           secondary head output is blanked while you are in X. With XFree
 879           3.9.17 preview you can use both heads if you use SVGA over fbdev or
 880           the fbdev driver on first head and the fbdev driver on second head.
 881
 882           If you compile it as module, two modules are created,
 883           matroxfb_crtc2 and matroxfb_maven. Matroxfb_maven is needed for
 884           both G200 and G400, matroxfb_crtc2 is needed only by G400. You must
 885           also load i2c-matroxfb to get it to run.
 886
 887           The driver starts in monitor mode and you must use the matroxset
 888           tool (available at
 889           <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to switch it to
 890           PAL or NTSC or to swap primary and secondary head outputs.
 891           Secondary head driver also always start in 640x480 resolution, you
 892           must use fbset to change it.
 893
 894           Also do not forget that second head supports only 16 and 32 bpp
 895           packed pixels, so it is a good idea to compile them into the kernel
 896           too.  You can use only some font widths, as the driver uses generic
 897           painting procedures (the secondary head does not use acceleration
 898           engine).
 899
 900 config FB_MATROX_MULTIHEAD
 901         bool "Multihead support"
 902         depends on FB_MATROX
 903         ---help---
 904           Say Y here if you have more than one (supported) Matrox device in
 905           your computer and you want to use all of them for different monitors
 906           ("multihead"). If you have only one device, you should say N because
 907           the driver compiled with Y is larger and a bit slower, especially on
 908           ia32 (ix86).
 909
 910           If you said M to "Matrox unified accelerated driver" and N here, you
 911           will still be able to use several Matrox devices simultaneously:
 912           insert several instances of the module matroxfb into the kernel
 913           with insmod, supplying the parameter "dev=N" where N is 0, 1, etc.
 914           for the different Matrox devices. This method is slightly faster but
 915           uses 40 KB of kernel memory per Matrox card.
 916
 917           There is no need for enabling 'Matrox multihead support' if you have
 918           only one Matrox card in the box.
 919
 920 config FB_RADEON_OLD
 921         tristate "ATI Radeon display support (Old driver)"
 922         depends on FB && PCI
 923         select FB_CFB_FILLRECT
 924         select FB_CFB_COPYAREA
 925         select FB_CFB_IMAGEBLIT
 926         select FB_SOFT_CURSOR
 927         select FB_MACMODES if PPC
 928         help
 929           Choose this option if you want to use an ATI Radeon graphics card as
 930           a framebuffer device.  There are both PCI and AGP versions.  You
 931           don't need to choose this to run the Radeon in plain VGA mode.
 932           There is a product page at
 933           <http://www.ati.com/na/pages/products/pc/radeon32/index.html>.
 934
 935 config FB_RADEON
 936         tristate "ATI Radeon display support"
 937         depends on FB && PCI
 938         select I2C_ALGOBIT if FB_RADEON_I2C
 939         select I2C if FB_RADEON_I2C
 940         select FB_MODE_HELPERS
 941         select FB_CFB_FILLRECT
 942         select FB_CFB_COPYAREA
 943         select FB_CFB_IMAGEBLIT
 944         select FB_SOFT_CURSOR
 945         select FB_MACMODES if PPC_OF
 946         help
 947           Choose this option if you want to use an ATI Radeon graphics card as
 948           a framebuffer device.  There are both PCI and AGP versions.  You
 949           don't need to choose this to run the Radeon in plain VGA mode.
 950
 951           If you say Y here and want DDC/I2C support you must first say Y to
 952           "I2C support" and "I2C bit-banging support" in the character devices
 953           section.
 954
 955           If you say M here then "I2C support" and "I2C bit-banging support"
 956           can be build either as modules or built-in.
 957
 958           There is a product page at
 959           http://apps.ati.com/ATIcompare/
 960 config FB_RADEON_I2C
 961         bool "DDC/I2C for ATI Radeon support"
 962         depends on FB_RADEON
 963         default y
 964         help
 965           Say Y here if you want DDC/I2C support for your Radeon board.
 966
 967 config FB_RADEON_DEBUG
 968         bool "Lots of debug output from Radeon driver"
 969         depends on FB_RADEON
 970         default n
 971         help
 972           Say Y here if you want the Radeon driver to output all sorts
 973           of debugging informations to provide to the maintainer when
 974           something goes wrong.
 975
 976 config FB_ATY128
 977         tristate "ATI Rage128 display support"
 978         depends on FB && PCI
 979         select FB_CFB_FILLRECT
 980         select FB_CFB_COPYAREA
 981         select FB_CFB_IMAGEBLIT
 982         select FB_SOFT_CURSOR
 983         select FB_MACMODES if PPC_PMAC
 984         help
 985           This driver supports graphics boards with the ATI Rage128 chips.
 986           Say Y if you have such a graphics board and read
 987           <file:Documentation/fb/aty128fb.txt>.
 988
 989           To compile this driver as a module, choose M here: the
 990           module will be called aty128fb.
 991
 992 config FB_ATY
 993         tristate "ATI Mach64 display support" if PCI || ATARI
 994         depends on FB
 995         select FB_CFB_FILLRECT
 996         select FB_CFB_COPYAREA
 997         select FB_CFB_IMAGEBLIT
 998         select FB_SOFT_CURSOR
 999         select FB_MACMODES if PPC
1000         help
1001           This driver supports graphics boards with the ATI Mach64 chips.
1002           Say Y if you have such a graphics board.
1003
1004           To compile this driver as a module, choose M here: the
1005           module will be called atyfb.
1006
1007 config FB_ATY_CT
1008         bool "Mach64 CT/VT/GT/LT (incl. 3D RAGE) support"
1009         depends on PCI && FB_ATY
1010         default y if SPARC64 && FB_PCI
1011         help
1012           Say Y here to support use of ATI's 64-bit Rage boards (or other
1013           boards based on the Mach64 CT, VT, GT, and LT chipsets) as a
1014           framebuffer device.  The ATI product support page for these boards
1015           is at <http://support.ati.com/products/pc/mach64/>.
1016
1017 config FB_ATY_GENERIC_LCD
1018         bool "Mach64 generic LCD support (EXPERIMENTAL)"
1019         depends on FB_ATY_CT
1020         help
1021           Say Y if you have a laptop with an ATI Rage LT PRO, Rage Mobility,
1022           Rage XC, or Rage XL chipset.
1023
1024 config FB_ATY_XL_INIT
1025         bool "Rage XL No-BIOS Init support"
1026         depends on FB_ATY_CT
1027         help
1028           Say Y here to support booting a Rage XL without BIOS support.
1029
1030 config FB_ATY_GX
1031         bool "Mach64 GX support" if PCI
1032         depends on FB_ATY
1033         default y if ATARI
1034         help
1035           Say Y here to support use of the ATI Mach64 Graphics Expression
1036           board (or other boards based on the Mach64 GX chipset) as a
1037           framebuffer device.  The ATI product support page for these boards
1038           is at
1039           <http://support.ati.com/products/pc/mach64/graphics_xpression.html>.
1040
1041 config FB_SAVAGE
1042         tristate "S3 Savage support"
1043         depends on FB && PCI && EXPERIMENTAL
1044         select I2C_ALGOBIT if FB_SAVAGE_I2C
1045         select I2C if FB_SAVAGE_I2C
1046         select FB_MODE_HELPERS
1047         select FB_CFB_FILLRECT
1048         select FB_CFB_COPYAREA
1049         select FB_CFB_IMAGEBLIT
1050         select FB_SOFT_CURSOR
1051         help
1052           This driver supports notebooks and computers with S3 Savage PCI/AGP
1053           chips.
1054
1055           Say Y if you have such a graphics card.
1056
1057           To compile this driver as a module, choose M here; the module
1058           will be called savagefb.
1059
1060 config FB_SAVAGE_I2C
1061        bool "Enable DDC2 Support"
1062        depends on FB_SAVAGE
1063        help
1064           This enables I2C support for S3 Savage Chipsets.  This is used
1065           only for getting EDID information from the attached display
1066           allowing for robust video mode handling and switching.
1067
1068           Because fbdev-2.6 requires that drivers must be able to
1069           independently validate video mode parameters, you should say Y
1070           here.
1071
1072 config FB_SAVAGE_ACCEL
1073        bool "Enable Console Acceleration"
1074        depends on FB_SAVAGE
1075        default n
1076        help
1077           This option will compile in console acceleration support. If
1078           the resulting framebuffer console has bothersome glitches, then
1079           choose N here.
1080
1081 config FB_SIS
1082         tristate "SiS/XGI display support"
1083         depends on FB && PCI
1084         select FB_CFB_FILLRECT
1085         select FB_CFB_COPYAREA
1086         select FB_CFB_IMAGEBLIT
1087         select FB_SOFT_CURSOR
1088         help
1089           This is the frame buffer device driver for the SiS 300, 315, 330
1090           and 340 series as well as XGI V3XT, V5, V8, Z7 graphics chipsets.
1091           Specs available at <http://www.sis.com> and <http://www.xgitech.com>.
1092
1093           To compile this driver as a module, choose M here; the module
1094           will be called sisfb.
1095
1096 config FB_SIS_300
1097         bool "SiS 300 series support"
1098         depends on FB_SIS
1099         help
1100           Say Y here to support use of the SiS 300/305, 540, 630 and 730.
1101
1102 config FB_SIS_315
1103         bool "SiS 315/330/340 series and XGI support"
1104         depends on FB_SIS
1105         help
1106           Say Y here to support use of the SiS 315, 330 and 340 series
1107           (315/H/PRO, 55x, 650, 651, 740, 330, 661, 741, 760, 761) as well
1108           as XGI V3XT, V5, V8 and Z7.
1109
1110 config FB_NEOMAGIC
1111         tristate "NeoMagic display support"
1112         depends on FB && PCI
1113         select FB_MODE_HELPERS
1114         select FB_CFB_FILLRECT
1115         select FB_CFB_COPYAREA
1116         select FB_CFB_IMAGEBLIT
1117         select FB_SOFT_CURSOR
1118         help
1119           This driver supports notebooks with NeoMagic PCI chips.
1120           Say Y if you have such a graphics card.
1121
1122           To compile this driver as a module, choose M here: the
1123           module will be called neofb.
1124
1125 config FB_KYRO
1126         tristate "IMG Kyro support"
1127         depends on FB && PCI
1128         select FB_CFB_FILLRECT
1129         select FB_CFB_COPYAREA
1130         select FB_CFB_IMAGEBLIT
1131         select FB_SOFT_CURSOR
1132         help
1133           Say Y here if you have a STG4000 / Kyro / PowerVR 3 based
1134           graphics board.
1135
1136           To compile this driver as a module, choose M here: the
1137           module will be called kyrofb.
1138
1139 config FB_3DFX
1140         tristate "3Dfx Banshee/Voodoo3 display support"
1141         depends on FB && PCI
1142         select FB_CFB_IMAGEBLIT
1143         select FB_CFB_FILLRECT
1144         select FB_CFB_COPYAREA
1145         select FB_SOFT_CURSOR
1146         help
1147           This driver supports graphics boards with the 3Dfx Banshee/Voodoo3
1148           chips. Say Y if you have such a graphics board.
1149
1150           To compile this driver as a module, choose M here: the
1151           module will be called tdfxfb.
1152
1153 config FB_3DFX_ACCEL
1154         bool "3Dfx Banshee/Voodoo3 Acceleration functions (EXPERIMENTAL)"
1155         depends on FB_3DFX && EXPERIMENTAL
1156         ---help---
1157         This will compile the 3Dfx Banshee/Voodoo3 frame buffer device
1158         with acceleration functions.
1159
1160
1161 config FB_VOODOO1
1162         tristate "3Dfx Voodoo Graphics (sst1) support"
1163         depends on FB && PCI
1164         select FB_CFB_FILLRECT
1165         select FB_CFB_COPYAREA
1166         select FB_CFB_IMAGEBLIT
1167         select FB_SOFT_CURSOR
1168         ---help---
1169           Say Y here if you have a 3Dfx Voodoo Graphics (Voodoo1/sst1) or
1170           Voodoo2 (cvg) based graphics card.
1171
1172           To compile this driver as a module, choose M here: the
1173           module will be called sstfb.
1174
1175           WARNING: Do not use any application that uses the 3D engine
1176           (namely glide) while using this driver.
1177           Please read the <file:Documentation/fb/README-sstfb.txt> for supported
1178           options and other important info  support.
1179
1180 config FB_TRIDENT
1181         tristate "Trident support"
1182         depends on FB && PCI
1183         select FB_CFB_FILLRECT
1184         select FB_CFB_COPYAREA
1185         select FB_CFB_IMAGEBLIT
1186         select FB_SOFT_CURSOR
1187         ---help---
1188           This driver is supposed to support graphics boards with the
1189           Trident CyberXXXX/Image/CyberBlade chips mostly found in laptops
1190           but also on some motherboards. For more information, read
1191           <file:Documentation/fb/tridentfb.txt>
1192
1193           Say Y if you have such a graphics board.
1194
1195           To compile this driver as a module, choose M here: the
1196           module will be called tridentfb.
1197
1198 config FB_TRIDENT_ACCEL
1199         bool "Trident Acceleration functions (EXPERIMENTAL)"
1200         depends on FB_TRIDENT && EXPERIMENTAL
1201         ---help---
1202         This will compile the Trident frame buffer device with
1203         acceleration functions.
1204
1205
1206 config FB_PM3
1207         tristate "Permedia3 support"
1208         depends on FB && PCI && BROKEN
1209         help
1210           This is the frame buffer device driver for the 3DLabs Permedia3
1211           chipset, used in Formac ProFormance III, 3DLabs Oxygen VX1 &
1212           similar boards, 3DLabs Permedia3 Create!, Appian Jeronimo 2000
1213           and maybe other boards.
1214
1215 config FB_E1356
1216         tristate "Epson SED1356 framebuffer support"
1217         depends on FB && EXPERIMENTAL && PCI && MIPS
1218
1219 config PB1000_CRT
1220         bool "Use CRT on Pb1000 (J65)"
1221         depends on MIPS_PB1000=y && FB_E1356
1222
1223 config PB1000_NTSC
1224         bool "Use Compsite NTSC on Pb1000 (J63)"
1225         depends on MIPS_PB1000=y && FB_E1356
1226
1227 config PB1000_TFT
1228         bool "Use TFT Panel on Pb1000 (J64)"
1229         depends on MIPS_PB1000=y && FB_E1356
1230
1231 config PB1500_CRT
1232         bool "Use CRT on Pb1500 " if MIPS_PB1500=y
1233         depends on FB_E1356
1234
1235 config PB1500_CRT
1236         prompt "Use CRT on Pb1100 "
1237         depends on FB_E1356 && MIPS_PB1100=y
1238
1239 config PB1500_TFT
1240         bool "Use TFT Panel on Pb1500 " if MIPS_PB1500=y
1241         depends on FB_E1356
1242
1243 config PB1500_TFT
1244         prompt "Use TFT Panel on Pb1100 "
1245         depends on FB_E1356 && MIPS_PB1100=y
1246
1247 config FB_AU1100
1248         bool "Au1100 LCD Driver"
1249         depends on (FB = y) && EXPERIMENTAL && PCI && MIPS && MIPS_PB1100=y
1250
1251 source "drivers/video/geode/Kconfig"
1252
1253 config FB_SBUS
1254         bool "SBUS and UPA framebuffers"
1255         depends on (FB = y) && (SPARC32 || SPARC64)
1256         help
1257           Say Y if you want support for SBUS or UPA based frame buffer device.
1258
1259 config FB_FFB
1260         bool "Creator/Creator3D/Elite3D support"
1261         depends on FB_SBUS && SPARC64
1262         select FB_CFB_COPYAREA
1263         select FB_CFB_IMAGEBLIT
1264         select FB_SOFT_CURSOR
1265         help
1266           This is the frame buffer device driver for the Creator, Creator3D,
1267           and Elite3D graphics boards.
1268
1269 config FB_TCX
1270         bool "TCX (SS4/SS5 only) support"
1271         depends on FB_SBUS
1272         select FB_CFB_FILLRECT
1273         select FB_CFB_COPYAREA
1274         select FB_CFB_IMAGEBLIT
1275         select FB_SOFT_CURSOR
1276         help
1277           This is the frame buffer device driver for the TCX 24/8bit frame
1278           buffer.
1279
1280 config FB_CG14
1281         bool "CGfourteen (SX) support"
1282         depends on FB_SBUS
1283         select FB_CFB_FILLRECT
1284         select FB_CFB_COPYAREA
1285         select FB_CFB_IMAGEBLIT
1286         select FB_SOFT_CURSOR
1287         help
1288           This is the frame buffer device driver for the CGfourteen frame
1289           buffer on Desktop SPARCsystems with the SX graphics option.
1290
1291 config FB_P9100
1292         bool "P9100 (Sparcbook 3 only) support"
1293         depends on FB_SBUS
1294         select FB_CFB_FILLRECT
1295         select FB_CFB_COPYAREA
1296         select FB_CFB_IMAGEBLIT
1297         select FB_SOFT_CURSOR
1298         help
1299           This is the frame buffer device driver for the P9100 card
1300           supported on Sparcbook 3 machines.
1301
1302 config FB_LEO
1303         bool "Leo (ZX) support"
1304         depends on FB_SBUS
1305         select FB_CFB_FILLRECT
1306         select FB_CFB_COPYAREA
1307         select FB_CFB_IMAGEBLIT
1308         select FB_SOFT_CURSOR
1309         help
1310           This is the frame buffer device driver for the SBUS-based Sun ZX
1311           (leo) frame buffer cards.
1312
1313 config FB_PCI
1314         bool "PCI framebuffers"
1315         depends on (FB = y) && PCI && (SPARC64 || SPARC32)
1316
1317 config FB_IGA
1318         bool "IGA 168x display support"
1319         depends on SPARC32 && FB_PCI
1320         select FB_CFB_FILLRECT
1321         select FB_CFB_COPYAREA
1322         select FB_CFB_IMAGEBLIT
1323         select FB_SOFT_CURSOR
1324         help
1325           This is the framebuffer device for the INTERGRAPHICS 1680 and
1326           successor frame buffer cards.
1327
1328 config FB_HIT
1329         tristate "HD64461 Frame Buffer support"
1330         depends on FB && HD64461
1331         select FB_CFB_FILLRECT
1332         select FB_CFB_COPYAREA
1333         select FB_CFB_IMAGEBLIT
1334         select FB_SOFT_CURSOR
1335         help
1336           This is the frame buffer device driver for the Hitachi HD64461 LCD
1337           frame buffer card.
1338
1339 config FB_PMAG_AA
1340         bool "PMAG-AA TURBOchannel framebuffer support"
1341         depends on (FB = y) && MACH_DECSTATION && TC
1342         select FB_CFB_FILLRECT
1343         select FB_CFB_COPYAREA
1344         select FB_CFB_IMAGEBLIT
1345         select FB_SOFT_CURSOR
1346         help
1347           Support for the PMAG-AA TURBOchannel framebuffer card (1280x1024x1)
1348           used mainly in the MIPS-based DECstation series.
1349
1350 config FB_PMAG_BA
1351         bool "PMAG-BA TURBOchannel framebuffer support"
1352         depends on (FB = y) && MACH_DECSTATION && TC
1353         select FB_CFB_FILLRECT
1354         select FB_CFB_COPYAREA
1355         select FB_CFB_IMAGEBLIT
1356         select FB_SOFT_CURSOR
1357         help
1358           Support for the PMAG-BA TURBOchannel framebuffer card (1024x864x8)
1359           used mainly in the MIPS-based DECstation series.
1360
1361 config FB_PMAGB_B
1362         bool "PMAGB-B TURBOchannel framebuffer support"
1363         depends on (FB = y) && MACH_DECSTATION && TC
1364         select FB_CFB_FILLRECT
1365         select FB_CFB_COPYAREA
1366         select FB_CFB_IMAGEBLIT
1367         select FB_SOFT_CURSOR
1368         help
1369           Support for the PMAGB-B TURBOchannel framebuffer card used mainly
1370           in the MIPS-based DECstation series. The card is currently only
1371           supported in 1280x1024x8 mode.
1372
1373 config FB_MAXINE
1374         bool "Maxine (Personal DECstation) onboard framebuffer support"
1375         depends on (FB = y) && MACH_DECSTATION && TC
1376         select FB_CFB_FILLRECT
1377         select FB_CFB_COPYAREA
1378         select FB_CFB_IMAGEBLIT
1379         select FB_SOFT_CURSOR
1380         help
1381           Support for the onboard framebuffer (1024x768x8) in the Personal
1382           DECstation series (Personal DECstation 5000/20, /25, /33, /50,
1383           Codename "Maxine").
1384
1385 config FB_TX3912
1386         bool "TMPTX3912/PR31700 frame buffer support"
1387         depends on (FB = y) && NINO
1388         select FB_CFB_FILLRECT
1389         select FB_CFB_COPYAREA
1390         select FB_CFB_IMAGEBLIT
1391         select FB_SOFT_CURSOR
1392         help
1393           The TX3912 is a Toshiba RISC processor based on the MIPS 3900 core
1394           see <http://www.toshiba.com/taec/components/Generic/risc/tx3912.htm>.
1395
1396           Say Y here to enable kernel support for the on-board framebuffer.
1397
1398 config FB_G364
1399         bool "G364 frame buffer support"
1400         depends on (FB = y) && (MIPS_MAGNUM_4000 || OLIVETTI_M700)
1401         select FB_CFB_FILLRECT
1402         select FB_CFB_COPYAREA
1403         select FB_CFB_IMAGEBLIT
1404         select FB_SOFT_CURSOR
1405         help
1406           The G364 driver is the framebuffer used in MIPS Magnum 4000 and
1407           Olivetti M700-10 systems.
1408
1409 config FB_68328
1410         bool "Motorola 68328 native frame buffer support"
1411         depends on FB && (M68328 || M68EZ328 || M68VZ328)
1412         select FB_CFB_FILLRECT
1413         select FB_CFB_COPYAREA
1414         select FB_CFB_IMAGEBLIT
1415         select FB_SOFT_CURSOR
1416         help
1417           Say Y here if you want to support the built-in frame buffer of
1418           the Motorola 68328 CPU family.
1419
1420 config FB_PXA
1421         tristate "PXA LCD framebuffer support"
1422         depends on FB && ARCH_PXA
1423         select FB_CFB_FILLRECT
1424         select FB_CFB_COPYAREA
1425         select FB_CFB_IMAGEBLIT
1426         select FB_SOFT_CURSOR
1427         ---help---
1428           Frame buffer driver for the built-in LCD controller in the Intel
1429           PXA2x0 processor.
1430
1431           This driver is also available as a module ( = code which can be
1432           inserted and removed from the running kernel whenever you want). The
1433           module will be called vfb. If you want to compile it as a module,
1434           say M here and read <file:Documentation/modules.txt>.
1435
1436           If unsure, say N.
1437
1438 config FB_W100
1439         tristate "W100 frame buffer support"
1440         depends on FB && PXA_SHARPSL
1441         select FB_CFB_FILLRECT
1442         select FB_CFB_COPYAREA
1443         select FB_CFB_IMAGEBLIT
1444         select FB_SOFT_CURSOR
1445         ---help---
1446           Frame buffer driver for the w100 as found on the Sharp SL-Cxx series.
1447
1448           This driver is also available as a module ( = code which can be
1449           inserted and removed from the running kernel whenever you want). The
1450           module will be called vfb. If you want to compile it as a module,
1451           say M here and read <file:Documentation/modules.txt>.
1452
1453           If unsure, say N.
1454
1455 config FB_PXA_PARAMETERS
1456         bool "PXA LCD command line parameters"
1457         default n
1458         depends on FB_PXA
1459         ---help---
1460           Enable the use of kernel command line or module parameters
1461           to configure the physical properties of the LCD panel when
1462           using the PXA LCD driver.
1463
1464           This option allows you to override the panel parameters
1465           supplied by the platform in order to support multiple
1466           different models of flatpanel. If you will only be using a
1467           single model of flatpanel then you can safely leave this
1468           option disabled.
1469
1470           <file:Documentation/fb/pxafb.txt> describes the available parameters.
1471
1472 config FB_S1D13XXX
1473         tristate "Epson S1D13XXX framebuffer support"
1474         depends on FB
1475         select FB_CFB_FILLRECT
1476         select FB_CFB_COPYAREA
1477         select FB_CFB_IMAGEBLIT
1478         select FB_SOFT_CURSOR
1479         help
1480           Support for S1D13XXX framebuffer device family (currently only
1481           working with S1D13806). Product specs at
1482           <http://www.erd.epson.com/vdc/html/legacy_13xxx.htm>
1483
1484 config FB_VIRTUAL
1485         tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)"
1486         depends on FB
1487         select FB_CFB_FILLRECT
1488         select FB_CFB_COPYAREA
1489         select FB_CFB_IMAGEBLIT
1490         select FB_SOFT_CURSOR
1491         ---help---
1492           This is a `virtual' frame buffer device. It operates on a chunk of
1493           unswappable kernel memory instead of on the memory of a graphics
1494           board. This means you cannot see any output sent to this frame
1495           buffer device, while it does consume precious memory. The main use
1496           of this frame buffer device is testing and debugging the frame
1497           buffer subsystem. Do NOT enable it for normal systems! To protect
1498           the innocent, it has to be enabled explicitly at boot time using the
1499           kernel option `video=vfb:'.
1500
1501           To compile this driver as a module, choose M here: the
1502           module will be called vfb.
1503
1504           If unsure, say N.
1505 if VT
1506         source "drivers/video/console/Kconfig"
1507 endif
1508
1509 if FB || SGI_NEWPORT_CONSOLE
1510         source "drivers/video/logo/Kconfig"
1511 endif
1512
1513 if FB && SYSFS
1514         source "drivers/video/backlight/Kconfig"
1515 endif
1516
1517 endmenu
1518