drivers/video/backlight/locomolcd.c

   1 /*
   2  * Backlight control code for Sharp Zaurus SL-5500
   3  *
   4  * Copyright 2005 John Lenz <lenz@cs.wisc.edu>
   5  * Maintainer: Pavel Machek <pavel@ucw.cz> (unless John wants to :-)
   6  * GPL v2
   7  *
   8  * This driver assumes single CPU. That's okay, because collie is
   9  * slightly old hardware, and no one is going to retrofit second CPU to
  10  * old PDA.
  11  */
  12
  13 /* LCD power functions */
  14 #include <linux/module.h>
  15 #include <linux/init.h>
  16 #include <linux/delay.h>
  17 #include <linux/device.h>
  18 #include <linux/interrupt.h>
  19 #include <linux/fb.h>
  20 #include <linux/backlight.h>
  21
  22 #include <asm/hardware/locomo.h>
  23 #include <asm/irq.h>
  24 #include <asm/mach/sharpsl_param.h>
  25 #include <asm/mach-types.h>
  26
  27 #include "../../../arch/arm/mach-sa1100/generic.h"
  28
  29 static struct backlight_device *locomolcd_bl_device;
  30 static struct locomo_dev *locomolcd_dev;
  31 static unsigned long locomolcd_flags;
  32 #define LOCOMOLCD_SUSPENDED     0x01
  33
  34 static void locomolcd_on(int comadj)
  35 {
  36         locomo_gpio_set_dir(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_VSHA_ON, 0);
  37         locomo_gpio_write(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_VSHA_ON, 1);
  38         mdelay(2);
  39
  40         locomo_gpio_set_dir(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_VSHD_ON, 0);
  41         locomo_gpio_write(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_VSHD_ON, 1);
  42         mdelay(2);
  43
  44         locomo_m62332_senddata(locomolcd_dev, comadj, 0);
  45         mdelay(5);
  46
  47         locomo_gpio_set_dir(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_VEE_ON, 0);
  48         locomo_gpio_write(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_VEE_ON, 1);
  49         mdelay(10);
  50
  51         /* TFTCRST | CPSOUT=0 | CPSEN */
  52         locomo_writel(0x01, locomolcd_dev->mapbase + LOCOMO_TC);
  53
  54         /* Set CPSD */
  55         locomo_writel(6, locomolcd_dev->mapbase + LOCOMO_CPSD);
  56
  57         /* TFTCRST | CPSOUT=0 | CPSEN */
  58         locomo_writel((0x04 | 0x01), locomolcd_dev->mapbase + LOCOMO_TC);
  59         mdelay(10);
  60
  61         locomo_gpio_set_dir(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_MOD, 0);
  62         locomo_gpio_write(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_MOD, 1);
  63 }
  64
  65 static void locomolcd_off(int comadj)
  66 {
  67         /* TFTCRST=1 | CPSOUT=1 | CPSEN = 0 */
  68         locomo_writel(0x06, locomolcd_dev->mapbase + LOCOMO_TC);
  69         mdelay(1);
  70
  71         locomo_gpio_write(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_VSHA_ON, 0);
  72         mdelay(110);
  73
  74         locomo_gpio_write(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_VEE_ON, 0);
  75         mdelay(700);
  76
  77         /* TFTCRST=0 | CPSOUT=0 | CPSEN = 0 */
  78         locomo_writel(0, locomolcd_dev->mapbase + LOCOMO_TC);
  79         locomo_gpio_write(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_MOD, 0);
  80         locomo_gpio_write(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_VSHD_ON, 0);
  81 }
  82
  83 void locomolcd_power(int on)
  84 {
  85         int comadj = sharpsl_param.comadj;
  86         unsigned long flags;
  87
  88         local_irq_save(flags);
  89
  90         if (!locomolcd_dev) {
  91                 local_irq_restore(flags);
  92                 return;
  93         }
  94
  95         /* read comadj */
  96         if (comadj == -1 && machine_is_collie())
  97                 comadj = 128;
  98         if (comadj == -1 && machine_is_poodle())
  99                 comadj = 118;
 100
 101         if (on)
 102                 locomolcd_on(comadj);
 103         else
 104                 locomolcd_off(comadj);
 105
 106         local_irq_restore(flags);
 107 }
 108 EXPORT_SYMBOL(locomolcd_power);
 109
 110 static int current_intensity;
 111
 112 static int locomolcd_set_intensity(struct backlight_device *bd)
 113 {
 114         int intensity = bd->props.brightness;
 115
 116         if (bd->props.power != FB_BLANK_UNBLANK)
 117                 intensity = 0;
 118         if (bd->props.fb_blank != FB_BLANK_UNBLANK)
 119                 intensity = 0;
 120         if (locomolcd_flags & LOCOMOLCD_SUSPENDED)
 121                 intensity = 0;
 122
 123         switch (intensity) {
 124         /*
 125          * AC and non-AC are handled differently,
 126          * but produce same results in sharp code?
 127          */
 128         case 0:
 129                 locomo_frontlight_set(locomolcd_dev, 0, 0, 161);
 130                 break;
 131         case 1:
 132                 locomo_frontlight_set(locomolcd_dev, 117, 0, 161);
 133                 break;
 134         case 2:
 135                 locomo_frontlight_set(locomolcd_dev, 163, 0, 148);
 136                 break;
 137         case 3:
 138                 locomo_frontlight_set(locomolcd_dev, 194, 0, 161);
 139                 break;
 140         case 4:
 141                 locomo_frontlight_set(locomolcd_dev, 194, 1, 161);
 142                 break;
 143         default:
 144                 return -ENODEV;
 145         }
 146         current_intensity = intensity;
 147         return 0;
 148 }
 149
 150 static int locomolcd_get_intensity(struct backlight_device *bd)
 151 {
 152         return current_intensity;
 153 }
 154
 155 static const struct backlight_ops locomobl_data = {
 156         .get_brightness = locomolcd_get_intensity,
 157         .update_status  = locomolcd_set_intensity,
 158 };
 159
 160 #ifdef CONFIG_PM
 161 static int locomolcd_suspend(struct locomo_dev *dev, pm_message_t state)
 162 {
 163         locomolcd_flags |= LOCOMOLCD_SUSPENDED;
 164         locomolcd_set_intensity(locomolcd_bl_device);
 165         return 0;
 166 }
 167
 168 static int locomolcd_resume(struct locomo_dev *dev)
 169 {
 170         locomolcd_flags &= ~LOCOMOLCD_SUSPENDED;
 171         locomolcd_set_intensity(locomolcd_bl_device);
 172         return 0;
 173 }
 174 #else
 175 #define locomolcd_suspend       NULL
 176 #define locomolcd_resume        NULL
 177 #endif
 178
 179 static int locomolcd_probe(struct locomo_dev *ldev)
 180 {
 181         struct backlight_properties props;
 182         unsigned long flags;
 183
 184         local_irq_save(flags);
 185         locomolcd_dev = ldev;
 186
 187         locomo_gpio_set_dir(ldev->dev.parent, LOCOMO_GPIO_FL_VR, 0);
 188
 189         /*
 190          * the poodle_lcd_power function is called for the first time
 191          * from fs_initcall, which is before locomo is activated.
 192          * We need to recall poodle_lcd_power here
 193          */
 194         if (machine_is_poodle())
 195                 locomolcd_power(1);
 196
 197         local_irq_restore(flags);
 198
 199         memset(&props, 0, sizeof(struct backlight_properties));
 200         props.type = BACKLIGHT_RAW;
 201         props.max_brightness = 4;
 202         locomolcd_bl_device = backlight_device_register("locomo-bl",
 203                                                         &ldev->dev, NULL,
 204                                                         &locomobl_data, &props);
 205
 206         if (IS_ERR(locomolcd_bl_device))
 207                 return PTR_ERR(locomolcd_bl_device);
 208
 209         /* Set up frontlight so that screen is readable */
 210         locomolcd_bl_device->props.brightness = 2;
 211         locomolcd_set_intensity(locomolcd_bl_device);
 212
 213         return 0;
 214 }
 215
 216 static int locomolcd_remove(struct locomo_dev *dev)
 217 {
 218         unsigned long flags;
 219
 220         locomolcd_bl_device->props.brightness = 0;
 221         locomolcd_bl_device->props.power = 0;
 222         locomolcd_set_intensity(locomolcd_bl_device);
 223
 224         backlight_device_unregister(locomolcd_bl_device);
 225         local_irq_save(flags);
 226         locomolcd_dev = NULL;
 227         local_irq_restore(flags);
 228         return 0;
 229 }
 230
 231 static struct locomo_driver poodle_lcd_driver = {
 232         .drv = {
 233                 .name = "locomo-backlight",
 234         },
 235         .devid  = LOCOMO_DEVID_BACKLIGHT,
 236         .probe  = locomolcd_probe,
 237         .remove = locomolcd_remove,
 238         .suspend = locomolcd_suspend,
 239         .resume = locomolcd_resume,
 240 };
 241
 242 static int __init locomolcd_init(void)
 243 {
 244         return locomo_driver_register(&poodle_lcd_driver);
 245 }
 246
 247 static void __exit locomolcd_exit(void)
 248 {
 249         locomo_driver_unregister(&poodle_lcd_driver);
 250 }
 251
 252 module_init(locomolcd_init);
 253 module_exit(locomolcd_exit);
 254
 255 MODULE_AUTHOR("John Lenz <lenz@cs.wisc.edu>, Pavel Machek <pavel@ucw.cz>");
 256 MODULE_DESCRIPTION("Collie LCD driver");
 257 MODULE_LICENSE("GPL");