drivers/watchdog/Kconfig

   1
   2 #
   3 # Watchdog device configuration
   4 #
   5
   6 menuconfig WATCHDOG
   7         bool "Watchdog Timer Support"
   8         ---help---
   9           If you say Y here (and to one of the following options) and create a
  10           character special file /dev/watchdog with major number 10 and minor
  11           number 130 using mknod ("man mknod"), you will get a watchdog, i.e.:
  12           subsequently opening the file and then failing to write to it for
  13           longer than 1 minute will result in rebooting the machine. This
  14           could be useful for a networked machine that needs to come back
  15           on-line as fast as possible after a lock-up. There's both a watchdog
  16           implementation entirely in software (which can sometimes fail to
  17           reboot the machine) and a driver for hardware watchdog boards, which
  18           are more robust and can also keep track of the temperature inside
  19           your computer. For details, read
  20           <file:Documentation/watchdog/watchdog-api.txt> in the kernel source.
  21
  22           The watchdog is usually used together with the watchdog daemon
  23           which is available from
  24           <ftp://ibiblio.org/pub/Linux/system/daemons/watchdog/>. This daemon can
  25           also monitor NFS connections and can reboot the machine when the process
  26           table is full.
  27
  28           If unsure, say N.
  29
  30 if WATCHDOG
  31
  32 config WATCHDOG_CORE
  33         bool "WatchDog Timer Driver Core"
  34         ---help---
  35           Say Y here if you want to use the new watchdog timer driver core.
  36           This driver provides a framework for all watchdog timer drivers
  37           and gives them the /dev/watchdog interface (and later also the
  38           sysfs interface).
  39
  40 config WATCHDOG_NOWAYOUT
  41         bool "Disable watchdog shutdown on close"
  42         help
  43           The default watchdog behaviour (which you get if you say N here) is
  44           to stop the timer if the process managing it closes the file
  45           /dev/watchdog. It's always remotely possible that this process might
  46           get killed. If you say Y here, the watchdog cannot be stopped once
  47           it has been started.
  48
  49 #
  50 # General Watchdog drivers
  51 #
  52
  53 comment "Watchdog Device Drivers"
  54
  55 # Architecture Independent
  56
  57 config SOFT_WATCHDOG
  58         tristate "Software watchdog"
  59         select WATCHDOG_CORE
  60         help
  61           A software monitoring watchdog. This will fail to reboot your system
  62           from some situations that the hardware watchdog will recover
  63           from. Equally it's a lot cheaper to install.
  64
  65           To compile this driver as a module, choose M here: the
  66           module will be called softdog.
  67
  68 config DA9052_WATCHDOG
  69         tristate "Dialog DA9052 Watchdog"
  70         depends on PMIC_DA9052
  71         select WATCHDOG_CORE
  72         help
  73           Support for the watchdog in the DA9052 PMIC. Watchdog trigger
  74           cause system reset.
  75
  76           Say Y here to include support for the DA9052 watchdog.
  77           Alternatively say M to compile the driver as a module,
  78           which will be called da9052_wdt.
  79
  80 config DA9055_WATCHDOG
  81         tristate "Dialog Semiconductor DA9055 Watchdog"
  82         depends on MFD_DA9055
  83         select WATCHDOG_CORE
  84         help
  85           If you say yes here you get support for watchdog on the Dialog
  86           Semiconductor DA9055 PMIC.
  87
  88           This driver can also be built as a module.  If so, the module
  89           will be called da9055_wdt.
  90
  91 config DA9063_WATCHDOG
  92         tristate "Dialog DA9063 Watchdog"
  93         depends on MFD_DA9063
  94         select WATCHDOG_CORE
  95         help
  96           Support for the watchdog in the DA9063 PMIC.
  97
  98           This driver can be built as a module. The module name is da9063_wdt.
  99
 100 config DA9062_WATCHDOG
 101         tristate "Dialog DA9062 Watchdog"
 102         depends on MFD_DA9062
 103         select WATCHDOG_CORE
 104         help
 105           Support for the watchdog in the DA9062 PMIC.
 106
 107           This driver can be built as a module. The module name is da9062_wdt.
 108
 109 config GPIO_WATCHDOG
 110         tristate "Watchdog device controlled through GPIO-line"
 111         depends on OF_GPIO
 112         select WATCHDOG_CORE
 113         help
 114           If you say yes here you get support for watchdog device
 115           controlled through GPIO-line.
 116
 117 config GPIO_WATCHDOG_ARCH_INITCALL
 118         bool "Register the watchdog as early as possible"
 119         depends on GPIO_WATCHDOG=y
 120         help
 121           In some situations, the default initcall level (module_init)
 122           in not early enough in the boot process to avoid the watchdog
 123           to be triggered.
 124           If you say yes here, the initcall level would be raised to
 125           arch_initcall.
 126           If in doubt, say N.
 127
 128 config MENF21BMC_WATCHDOG
 129         tristate "MEN 14F021P00 BMC Watchdog"
 130         depends on MFD_MENF21BMC
 131         select WATCHDOG_CORE
 132         help
 133           Say Y here to include support for the MEN 14F021P00 BMC Watchdog.
 134
 135           This driver can also be built as a module. If so the module
 136           will be called menf21bmc_wdt.
 137
 138 config WM831X_WATCHDOG
 139         tristate "WM831x watchdog"
 140         depends on MFD_WM831X
 141         select WATCHDOG_CORE
 142         help
 143           Support for the watchdog in the WM831x AudioPlus PMICs.  When
 144           the watchdog triggers the system will be reset.
 145
 146 config WM8350_WATCHDOG
 147         tristate "WM8350 watchdog"
 148         depends on MFD_WM8350
 149         select WATCHDOG_CORE
 150         help
 151           Support for the watchdog in the WM8350 AudioPlus PMIC.  When
 152           the watchdog triggers the system will be reset.
 153
 154 config XILINX_WATCHDOG
 155         tristate "Xilinx Watchdog timer"
 156         depends on HAS_IOMEM
 157         select WATCHDOG_CORE
 158         help
 159           Watchdog driver for the xps_timebase_wdt ip core.
 160
 161           To compile this driver as a module, choose M here: the
 162           module will be called of_xilinx_wdt.
 163
 164 # ALPHA Architecture
 165
 166 # ARM Architecture
 167
 168 config ARM_SP805_WATCHDOG
 169         tristate "ARM SP805 Watchdog"
 170         depends on (ARM || ARM64) && ARM_AMBA
 171         select WATCHDOG_CORE
 172         help
 173           ARM Primecell SP805 Watchdog timer. This will reboot your system when
 174           the timeout is reached.
 175
 176 config AT91RM9200_WATCHDOG
 177         tristate "AT91RM9200 watchdog"
 178         depends on SOC_AT91RM9200 && MFD_SYSCON
 179         help
 180           Watchdog timer embedded into AT91RM9200 chips. This will reboot your
 181           system when the timeout is reached.
 182
 183 config AT91SAM9X_WATCHDOG
 184         tristate "AT91SAM9X / AT91CAP9 watchdog"
 185         depends on ARCH_AT91
 186         select WATCHDOG_CORE
 187         help
 188           Watchdog timer embedded into AT91SAM9X and AT91CAP9 chips. This will
 189           reboot your system when the timeout is reached.
 190
 191 config CADENCE_WATCHDOG
 192         tristate "Cadence Watchdog Timer"
 193         depends on HAS_IOMEM
 194         select WATCHDOG_CORE
 195         help
 196           Say Y here if you want to include support for the watchdog
 197           timer in the Xilinx Zynq.
 198
 199 config 21285_WATCHDOG
 200         tristate "DC21285 watchdog"
 201         depends on FOOTBRIDGE
 202         help
 203           The Intel Footbridge chip contains a built-in watchdog circuit. Say Y
 204           here if you wish to use this. Alternatively say M to compile the
 205           driver as a module, which will be called wdt285.
 206
 207           This driver does not work on all machines. In particular, early CATS
 208           boards have hardware problems that will cause the machine to simply
 209           lock up if the watchdog fires.
 210
 211           "If in doubt, leave it out" - say N.
 212
 213 config 977_WATCHDOG
 214         tristate "NetWinder WB83C977 watchdog"
 215         depends on FOOTBRIDGE && ARCH_NETWINDER
 216         help
 217           Say Y here to include support for the WB977 watchdog included in
 218           NetWinder machines. Alternatively say M to compile the driver as
 219           a module, which will be called wdt977.
 220
 221           Not sure? It's safe to say N.
 222
 223 config IXP4XX_WATCHDOG
 224         tristate "IXP4xx Watchdog"
 225         depends on ARCH_IXP4XX
 226         help
 227           Say Y here if to include support for the watchdog timer
 228           in the Intel IXP4xx network processors. This driver can
 229           be built as a module by choosing M. The module will
 230           be called ixp4xx_wdt.
 231
 232           Note: The internal IXP4xx watchdog does a soft CPU reset
 233           which doesn't reset any peripherals. There are circumstances
 234           where the watchdog will fail to reset the board correctly
 235           (e.g., if the boot ROM is in an unreadable state).
 236
 237           Say N if you are unsure.
 238
 239 config KS8695_WATCHDOG
 240         tristate "KS8695 watchdog"
 241         depends on ARCH_KS8695
 242         help
 243           Watchdog timer embedded into KS8695 processor. This will reboot your
 244           system when the timeout is reached.
 245
 246 config HAVE_S3C2410_WATCHDOG
 247         bool
 248         help
 249           This will include watchdog timer support for Samsung SoCs. If
 250           you want to include watchdog support for any machine, kindly
 251           select this in the respective mach-XXXX/Kconfig file.
 252
 253 config S3C2410_WATCHDOG
 254         tristate "S3C2410 Watchdog"
 255         depends on HAVE_S3C2410_WATCHDOG
 256         select WATCHDOG_CORE
 257         select MFD_SYSCON if ARCH_EXYNOS5
 258         help
 259           Watchdog timer block in the Samsung SoCs. This will reboot
 260           the system when the timer expires with the watchdog enabled.
 261
 262           The driver is limited by the speed of the system's PCLK
 263           signal, so with reasonably fast systems (PCLK around 50-66MHz)
 264           then watchdog intervals of over approximately 20seconds are
 265           unavailable.
 266
 267           The driver can be built as a module by choosing M, and will
 268           be called s3c2410_wdt
 269
 270 config SA1100_WATCHDOG
 271         tristate "SA1100/PXA2xx watchdog"
 272         depends on ARCH_SA1100 || ARCH_PXA
 273         help
 274           Watchdog timer embedded into SA11x0 and PXA2xx chips. This will
 275           reboot your system when timeout is reached.
 276
 277           NOTE: once enabled, this timer cannot be disabled.
 278
 279           To compile this driver as a module, choose M here: the
 280           module will be called sa1100_wdt.
 281
 282 config DW_WATCHDOG
 283         tristate "Synopsys DesignWare watchdog"
 284         depends on HAS_IOMEM
 285         help
 286           Say Y here if to include support for the Synopsys DesignWare
 287           watchdog timer found in many chips.
 288           To compile this driver as a module, choose M here: the
 289           module will be called dw_wdt.
 290
 291 config EP93XX_WATCHDOG
 292         tristate "EP93xx Watchdog"
 293         depends on ARCH_EP93XX
 294         select WATCHDOG_CORE
 295         help
 296           Say Y here if to include support for the watchdog timer
 297           embedded in the Cirrus Logic EP93xx family of devices.
 298
 299           To compile this driver as a module, choose M here: the
 300           module will be called ep93xx_wdt.
 301
 302 config OMAP_WATCHDOG
 303         tristate "OMAP Watchdog"
 304         depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS
 305         select WATCHDOG_CORE
 306         help
 307           Support for TI OMAP1610/OMAP1710/OMAP2420/OMAP3430/OMAP4430 watchdog.  Say 'Y'
 308           here to enable the OMAP1610/OMAP1710/OMAP2420/OMAP3430/OMAP4430 watchdog timer.
 309
 310 config PNX4008_WATCHDOG
 311         tristate "LPC32XX Watchdog"
 312         depends on ARCH_LPC32XX
 313         select WATCHDOG_CORE
 314         help
 315           Say Y here if to include support for the watchdog timer
 316           in the LPC32XX processor.
 317           This driver can be built as a module by choosing M. The module
 318           will be called pnx4008_wdt.
 319
 320           Say N if you are unsure.
 321
 322 config IOP_WATCHDOG
 323         tristate "IOP Watchdog"
 324         depends on ARCH_IOP13XX
 325         select WATCHDOG_NOWAYOUT if (ARCH_IOP32X || ARCH_IOP33X)
 326         help
 327           Say Y here if to include support for the watchdog timer
 328           in the Intel IOP3XX & IOP13XX I/O Processors.  This driver can
 329           be built as a module by choosing M. The module will
 330           be called iop_wdt.
 331
 332           Note: The IOP13XX watchdog does an Internal Bus Reset which will
 333           affect both cores and the peripherals of the IOP.  The ATU-X
 334           and/or ATUe configuration registers will remain intact, but if
 335           operating as an Root Complex and/or Central Resource, the PCI-X
 336           and/or PCIe busses will also be reset.  THIS IS A VERY BIG HAMMER.
 337
 338 config DAVINCI_WATCHDOG
 339         tristate "DaVinci watchdog"
 340         depends on ARCH_DAVINCI || ARCH_KEYSTONE
 341         select WATCHDOG_CORE
 342         help
 343           Say Y here if to include support for the watchdog timer
 344           in the DaVinci DM644x/DM646x or Keystone processors.
 345           To compile this driver as a module, choose M here: the
 346           module will be called davinci_wdt.
 347
 348           NOTE: once enabled, this timer cannot be disabled.
 349           Say N if you are unsure.
 350
 351 config ORION_WATCHDOG
 352         tristate "Orion watchdog"
 353         depends on ARCH_ORION5X || ARCH_DOVE || MACH_DOVE || ARCH_MVEBU
 354         select WATCHDOG_CORE
 355         help
 356           Say Y here if to include support for the watchdog timer
 357           in the Marvell Orion5x and Kirkwood ARM SoCs.
 358           To compile this driver as a module, choose M here: the
 359           module will be called orion_wdt.
 360
 361 config RN5T618_WATCHDOG
 362         tristate "Ricoh RN5T618 watchdog"
 363         depends on MFD_RN5T618
 364         select WATCHDOG_CORE
 365         help
 366           If you say yes here you get support for watchdog on the Ricoh
 367           RN5T618 PMIC.
 368
 369           This driver can also be built as a module.  If so, the module
 370           will be called rn5t618_wdt.
 371
 372 config SUNXI_WATCHDOG
 373         tristate "Allwinner SoCs watchdog support"
 374         depends on ARCH_SUNXI
 375         select WATCHDOG_CORE
 376         help
 377           Say Y here to include support for the watchdog timer
 378           in Allwinner SoCs.
 379           To compile this driver as a module, choose M here: the
 380           module will be called sunxi_wdt.
 381
 382 config COH901327_WATCHDOG
 383         bool "ST-Ericsson COH 901 327 watchdog"
 384         depends on ARCH_U300
 385         default y if MACH_U300
 386         select WATCHDOG_CORE
 387         help
 388           Say Y here to include Watchdog timer support for the
 389           watchdog embedded into the ST-Ericsson U300 series platforms.
 390           This watchdog is used to reset the system and thus cannot be
 391           compiled as a module.
 392
 393 config TWL4030_WATCHDOG
 394         tristate "TWL4030 Watchdog"
 395         depends on TWL4030_CORE
 396         select WATCHDOG_CORE
 397         help
 398           Support for TI TWL4030 watchdog.  Say 'Y' here to enable the
 399           watchdog timer support for TWL4030 chips.
 400
 401 config STMP3XXX_RTC_WATCHDOG
 402         tristate "Freescale STMP3XXX & i.MX23/28 watchdog"
 403         depends on RTC_DRV_STMP
 404         select WATCHDOG_CORE
 405         help
 406           Say Y here to include support for the watchdog timer inside
 407           the RTC for the STMP37XX/378X or i.MX23/28 SoC.
 408           To compile this driver as a module, choose M here: the
 409           module will be called stmp3xxx_rtc_wdt.
 410
 411 config NUC900_WATCHDOG
 412         tristate "Nuvoton NUC900 watchdog"
 413         depends on ARCH_W90X900
 414         help
 415           Say Y here if to include support for the watchdog timer
 416           for the Nuvoton NUC900 series SoCs.
 417           To compile this driver as a module, choose M here: the
 418           module will be called nuc900_wdt.
 419
 420 config TS72XX_WATCHDOG
 421         tristate "TS-72XX SBC Watchdog"
 422         depends on MACH_TS72XX
 423         help
 424           Technologic Systems TS-7200, TS-7250 and TS-7260 boards have
 425           watchdog timer implemented in a external CPLD chip. Say Y here
 426           if you want to support for the watchdog timer on TS-72XX boards.
 427
 428           To compile this driver as a module, choose M here: the
 429           module will be called ts72xx_wdt.
 430
 431 config MAX63XX_WATCHDOG
 432         tristate "Max63xx watchdog"
 433         depends on HAS_IOMEM
 434         select WATCHDOG_CORE
 435         help
 436           Support for memory mapped max63{69,70,71,72,73,74} watchdog timer.
 437
 438 config IMX2_WDT
 439         tristate "IMX2+ Watchdog"
 440         depends on ARCH_MXC
 441         select REGMAP_MMIO
 442         select WATCHDOG_CORE
 443         help
 444           This is the driver for the hardware watchdog
 445           on the Freescale IMX2 and later processors.
 446           If you have one of these processors and wish to have
 447           watchdog support enabled, say Y, otherwise say N.
 448
 449           To compile this driver as a module, choose M here: the
 450           module will be called imx2_wdt.
 451
 452 config UX500_WATCHDOG
 453         tristate "ST-Ericsson Ux500 watchdog"
 454         depends on MFD_DB8500_PRCMU
 455         select WATCHDOG_CORE
 456         default y
 457         help
 458           Say Y here to include Watchdog timer support for the watchdog
 459           existing in the prcmu of ST-Ericsson Ux500 series platforms.
 460
 461           To compile this driver as a module, choose M here: the
 462           module will be called ux500_wdt.
 463
 464 config RETU_WATCHDOG
 465         tristate "Retu watchdog"
 466         depends on MFD_RETU
 467         select WATCHDOG_CORE
 468         help
 469           Retu watchdog driver for Nokia Internet Tablets (770, N800,
 470           N810). At least on N800 the watchdog cannot be disabled, so
 471           this driver is essential and you should enable it.
 472
 473           To compile this driver as a module, choose M here: the
 474           module will be called retu_wdt.
 475
 476 config MOXART_WDT
 477         tristate "MOXART watchdog"
 478         depends on ARCH_MOXART
 479         help
 480           Say Y here to include Watchdog timer support for the watchdog
 481           existing on the MOXA ART SoC series platforms.
 482
 483           To compile this driver as a module, choose M here: the
 484           module will be called moxart_wdt.
 485
 486 config SIRFSOC_WATCHDOG
 487         tristate "SiRFSOC watchdog"
 488         depends on ARCH_SIRF
 489         select WATCHDOG_CORE
 490         default y
 491         help
 492           Support for CSR SiRFprimaII and SiRFatlasVI watchdog. When
 493           the watchdog triggers the system will be reset.
 494
 495 config ST_LPC_WATCHDOG
 496         tristate "STMicroelectronics LPC Watchdog"
 497         depends on ARCH_STI
 498         depends on OF
 499         select WATCHDOG_CORE
 500         help
 501           Say Y here to include STMicroelectronics Low Power Controller
 502           (LPC) based Watchdog timer support.
 503
 504           To compile this driver as a module, choose M here: the
 505           module will be called st_lpc_wdt.
 506
 507 config TEGRA_WATCHDOG
 508         tristate "Tegra watchdog"
 509         depends on (ARCH_TEGRA || COMPILE_TEST) && HAS_IOMEM
 510         select WATCHDOG_CORE
 511         help
 512           Say Y here to include support for the watchdog timer
 513           embedded in NVIDIA Tegra SoCs.
 514
 515           To compile this driver as a module, choose M here: the
 516           module will be called tegra_wdt.
 517
 518 config QCOM_WDT
 519         tristate "QCOM watchdog"
 520         depends on HAS_IOMEM
 521         depends on ARCH_QCOM
 522         select WATCHDOG_CORE
 523         help
 524           Say Y here to include Watchdog timer support for the watchdog found
 525           on QCOM chipsets.  Currently supported targets are the MSM8960,
 526           APQ8064, and IPQ8064.
 527
 528           To compile this driver as a module, choose M here: the
 529           module will be called qcom_wdt.
 530
 531 config MESON_WATCHDOG
 532         tristate "Amlogic Meson SoCs watchdog support"
 533         depends on ARCH_MESON
 534         select WATCHDOG_CORE
 535         help
 536           Say Y here to include support for the watchdog timer
 537           in Amlogic Meson SoCs.
 538           To compile this driver as a module, choose M here: the
 539           module will be called meson_wdt.
 540
 541 config MEDIATEK_WATCHDOG
 542         tristate "Mediatek SoCs watchdog support"
 543         depends on ARCH_MEDIATEK
 544         select WATCHDOG_CORE
 545         help
 546           Say Y here to include support for the watchdog timer
 547           in Mediatek SoCs.
 548           To compile this driver as a module, choose M here: the
 549           module will be called mtk_wdt.
 550
 551 config DIGICOLOR_WATCHDOG
 552         tristate "Conexant Digicolor SoCs watchdog support"
 553         depends on ARCH_DIGICOLOR
 554         select WATCHDOG_CORE
 555         help
 556           Say Y here to include support for the watchdog timer
 557           in Conexant Digicolor SoCs.
 558           To compile this driver as a module, choose M here: the
 559           module will be called digicolor_wdt.
 560
 561 # AVR32 Architecture
 562
 563 config AT32AP700X_WDT
 564         tristate "AT32AP700x watchdog"
 565         depends on CPU_AT32AP700X
 566         help
 567           Watchdog timer embedded into AT32AP700x devices. This will reboot
 568           your system when the timeout is reached.
 569
 570 # BLACKFIN Architecture
 571
 572 config BFIN_WDT
 573         tristate "Blackfin On-Chip Watchdog Timer"
 574         depends on BLACKFIN
 575         ---help---
 576           If you say yes here you will get support for the Blackfin On-Chip
 577           Watchdog Timer. If you have one of these processors and wish to
 578           have watchdog support enabled, say Y, otherwise say N.
 579
 580           To compile this driver as a module, choose M here: the
 581           module will be called bfin_wdt.
 582
 583 # CRIS Architecture
 584
 585 # FRV Architecture
 586
 587 # X86 (i386 + ia64 + x86_64) Architecture
 588
 589 config ACQUIRE_WDT
 590         tristate "Acquire SBC Watchdog Timer"
 591         depends on X86
 592         ---help---
 593           This is the driver for the hardware watchdog on Single Board
 594           Computers produced by Acquire Inc (and others). This watchdog
 595           simply watches your kernel to make sure it doesn't freeze, and if
 596           it does, it reboots your computer after a certain amount of time.
 597
 598           To compile this driver as a module, choose M here: the
 599           module will be called acquirewdt.
 600
 601           Most people will say N.
 602
 603 config ADVANTECH_WDT
 604         tristate "Advantech SBC Watchdog Timer"
 605         depends on X86
 606         help
 607           If you are configuring a Linux kernel for the Advantech single-board
 608           computer, say `Y' here to support its built-in watchdog timer
 609           feature. More information can be found at
 610           <http://www.advantech.com.tw/products/>
 611
 612 config ALIM1535_WDT
 613         tristate "ALi M1535 PMU Watchdog Timer"
 614         depends on X86 && PCI
 615         ---help---
 616           This is the driver for the hardware watchdog on the ALi M1535 PMU.
 617
 618           To compile this driver as a module, choose M here: the
 619           module will be called alim1535_wdt.
 620
 621           Most people will say N.
 622
 623 config ALIM7101_WDT
 624         tristate "ALi M7101 PMU Computer Watchdog"
 625         depends on PCI
 626         help
 627           This is the driver for the hardware watchdog on the ALi M7101 PMU
 628           as used in the x86 Cobalt servers and also found in some
 629           SPARC Netra servers too.
 630
 631           To compile this driver as a module, choose M here: the
 632           module will be called alim7101_wdt.
 633
 634           Most people will say N.
 635
 636 config F71808E_WDT
 637         tristate "Fintek F71808E, F71862FG, F71869, F71882FG and F71889FG Watchdog"
 638         depends on X86
 639         help
 640           This is the driver for the hardware watchdog on the Fintek
 641           F71808E, F71862FG, F71869, F71882FG and F71889FG Super I/O controllers.
 642
 643           You can compile this driver directly into the kernel, or use
 644           it as a module.  The module will be called f71808e_wdt.
 645
 646 config SP5100_TCO
 647         tristate "AMD/ATI SP5100 TCO Timer/Watchdog"
 648         depends on X86 && PCI
 649         ---help---
 650           Hardware watchdog driver for the AMD/ATI SP5100 chipset. The TCO
 651           (Total Cost of Ownership) timer is a watchdog timer that will reboot
 652           the machine after its expiration. The expiration time can be
 653           configured with the "heartbeat" parameter.
 654
 655           To compile this driver as a module, choose M here: the
 656           module will be called sp5100_tco.
 657
 658 config GEODE_WDT
 659         tristate "AMD Geode CS5535/CS5536 Watchdog"
 660         depends on CS5535_MFGPT
 661         help
 662           This driver enables a watchdog capability built into the
 663           CS5535/CS5536 companion chips for the AMD Geode GX and LX
 664           processors.  This watchdog watches your kernel to make sure
 665           it doesn't freeze, and if it does, it reboots your computer after
 666           a certain amount of time.
 667
 668           You can compile this driver directly into the kernel, or use
 669           it as a module.  The module will be called geodewdt.
 670
 671 config SC520_WDT
 672         tristate "AMD Elan SC520 processor Watchdog"
 673         depends on MELAN
 674         help
 675           This is the driver for the hardware watchdog built in to the
 676           AMD "Elan" SC520 microcomputer commonly used in embedded systems.
 677           This watchdog simply watches your kernel to make sure it doesn't
 678           freeze, and if it does, it reboots your computer after a certain
 679           amount of time.
 680
 681           You can compile this driver directly into the kernel, or use
 682           it as a module.  The module will be called sc520_wdt.
 683
 684 config SBC_FITPC2_WATCHDOG
 685         tristate "Compulab SBC-FITPC2 watchdog"
 686         depends on X86
 687         ---help---
 688           This is the driver for the built-in watchdog timer on the fit-PC2,
 689           fit-PC2i, CM-iAM single-board computers made by Compulab.
 690
 691           It`s possible to enable watchdog timer either from BIOS (F2) or from booted Linux.
 692           When "Watchdog Timer Value" enabled one can set 31-255 s operational range.
 693
 694           Entering BIOS setup temporary disables watchdog operation regardless to current state,
 695           so system will not be restarted while user in BIOS setup.
 696
 697           Once watchdog was enabled the system will be restarted every
 698           "Watchdog Timer Value" period, so to prevent it user can restart or
 699           disable the watchdog.
 700
 701           To compile this driver as a module, choose M here: the
 702           module will be called sbc_fitpc2_wdt.
 703
 704           Most people will say N.
 705
 706 config EUROTECH_WDT
 707         tristate "Eurotech CPU-1220/1410 Watchdog Timer"
 708         depends on X86
 709         help
 710           Enable support for the watchdog timer on the Eurotech CPU-1220 and
 711           CPU-1410 cards.  These are PC/104 SBCs. Spec sheets and product
 712           information are at <http://www.eurotech.it/>.
 713
 714 config IB700_WDT
 715         tristate "IB700 SBC Watchdog Timer"
 716         depends on X86
 717         ---help---
 718           This is the driver for the hardware watchdog on the IB700 Single
 719           Board Computer produced by TMC Technology (www.tmc-uk.com). This watchdog
 720           simply watches your kernel to make sure it doesn't freeze, and if
 721           it does, it reboots your computer after a certain amount of time.
 722
 723           This driver is like the WDT501 driver but for slightly different hardware.
 724
 725           To compile this driver as a module, choose M here: the
 726           module will be called ib700wdt.
 727
 728           Most people will say N.
 729
 730 config IBMASR
 731         tristate "IBM Automatic Server Restart"
 732         depends on X86
 733         help
 734           This is the driver for the IBM Automatic Server Restart watchdog
 735           timer built-in into some eServer xSeries machines.
 736
 737           To compile this driver as a module, choose M here: the
 738           module will be called ibmasr.
 739
 740 config WAFER_WDT
 741         tristate "ICP Single Board Computer Watchdog Timer"
 742         depends on X86
 743         help
 744           This is a driver for the hardware watchdog on the ICP Single
 745           Board Computer. This driver is working on (at least) the following
 746           IPC SBC's: Wafer 5823, Rocky 4783, Rocky 3703 and Rocky 3782.
 747
 748           To compile this driver as a module, choose M here: the
 749           module will be called wafer5823wdt.
 750
 751 config I6300ESB_WDT
 752         tristate "Intel 6300ESB Timer/Watchdog"
 753         depends on PCI
 754         ---help---
 755           Hardware driver for the watchdog timer built into the Intel
 756           6300ESB controller hub.
 757
 758           To compile this driver as a module, choose M here: the
 759           module will be called i6300esb.
 760
 761 config IE6XX_WDT
 762         tristate "Intel Atom E6xx Watchdog"
 763         depends on X86 && PCI
 764         select WATCHDOG_CORE
 765         select MFD_CORE
 766         select LPC_SCH
 767         ---help---
 768           Hardware driver for the watchdog timer built into the Intel
 769           Atom E6XX (TunnelCreek) processor.
 770
 771           To compile this driver as a module, choose M here: the
 772           module will be called ie6xx_wdt.
 773
 774 config INTEL_SCU_WATCHDOG
 775         bool "Intel SCU Watchdog for Mobile Platforms"
 776         depends on X86_INTEL_MID
 777         ---help---
 778           Hardware driver for the watchdog time built into the Intel SCU
 779           for Intel Mobile Platforms.
 780
 781           To compile this driver as a module, choose M here.
 782
 783 config INTEL_MID_WATCHDOG
 784         tristate "Intel MID Watchdog Timer"
 785         depends on X86_INTEL_MID
 786         select WATCHDOG_CORE
 787         ---help---
 788           Watchdog timer driver built into the Intel SCU for Intel MID
 789           Platforms.
 790
 791           This driver currently supports only the watchdog evolution
 792           implementation in SCU, available for Merrifield generation.
 793
 794           To compile this driver as a module, choose M here.
 795
 796 config ITCO_WDT
 797         tristate "Intel TCO Timer/Watchdog"
 798         depends on (X86 || IA64) && PCI
 799         select WATCHDOG_CORE
 800         select LPC_ICH
 801         ---help---
 802           Hardware driver for the intel TCO timer based watchdog devices.
 803           These drivers are included in the Intel 82801 I/O Controller
 804           Hub family (from ICH0 up to ICH10) and in the Intel 63xxESB
 805           controller hub.
 806
 807           The TCO (Total Cost of Ownership) timer is a watchdog timer
 808           that will reboot the machine after its second expiration. The
 809           expiration time can be configured with the "heartbeat" parameter.
 810
 811           On some motherboards the driver may fail to reset the chipset's
 812           NO_REBOOT flag which prevents the watchdog from rebooting the
 813           machine. If this is the case you will get a kernel message like
 814           "failed to reset NO_REBOOT flag, reboot disabled by hardware".
 815
 816           To compile this driver as a module, choose M here: the
 817           module will be called iTCO_wdt.
 818
 819 config ITCO_VENDOR_SUPPORT
 820         bool "Intel TCO Timer/Watchdog Specific Vendor Support"
 821         depends on ITCO_WDT
 822         ---help---
 823           Add vendor specific support to the intel TCO timer based watchdog
 824           devices. At this moment we only have additional support for some
 825           SuperMicro Inc. motherboards.
 826
 827 config IT8712F_WDT
 828         tristate "IT8712F (Smart Guardian) Watchdog Timer"
 829         depends on X86
 830         ---help---
 831           This is the driver for the built-in watchdog timer on the IT8712F
 832           Super I/0 chipset used on many motherboards.
 833
 834           If the driver does not work, then make sure that the game port in
 835           the BIOS is enabled.
 836
 837           To compile this driver as a module, choose M here: the
 838           module will be called it8712f_wdt.
 839
 840 config IT87_WDT
 841         tristate "IT87 Watchdog Timer"
 842         depends on X86
 843         ---help---
 844           This is the driver for the hardware watchdog on the ITE IT8702,
 845           IT8712, IT8716, IT8718, IT8720, IT8721, IT8726 and IT8728
 846           Super I/O chips.
 847
 848           If the driver does not work, then make sure that the game port in
 849           the BIOS is enabled.
 850
 851           This watchdog simply watches your kernel to make sure it doesn't
 852           freeze, and if it does, it reboots your computer after a certain
 853           amount of time.
 854
 855           To compile this driver as a module, choose M here: the module will
 856           be called it87_wdt.
 857
 858 config HP_WATCHDOG
 859         tristate "HP ProLiant iLO2+ Hardware Watchdog Timer"
 860         depends on X86 && PCI
 861         help
 862           A software monitoring watchdog and NMI sourcing driver. This driver
 863           will detect lockups and provide a stack trace. This is a driver that
 864           will only load on an HP ProLiant system with a minimum of iLO2 support.
 865           To compile this driver as a module, choose M here: the module will be
 866           called hpwdt.
 867
 868 config KEMPLD_WDT
 869         tristate "Kontron COM Watchdog Timer"
 870         depends on MFD_KEMPLD
 871         select WATCHDOG_CORE
 872         help
 873           Support for the PLD watchdog on some Kontron ETX and COMexpress
 874           (ETXexpress) modules
 875
 876           This driver can also be built as a module. If so, the module will be
 877           called kempld_wdt.
 878
 879 config HPWDT_NMI_DECODING
 880         bool "NMI decoding support for the HP ProLiant iLO2+ Hardware Watchdog Timer"
 881         depends on HP_WATCHDOG
 882         default y
 883         help
 884           When an NMI occurs this feature will make the necessary BIOS calls to
 885           log the cause of the NMI.
 886
 887 config SC1200_WDT
 888         tristate "National Semiconductor PC87307/PC97307 (ala SC1200) Watchdog"
 889         depends on X86
 890         help
 891           This is a driver for National Semiconductor PC87307/PC97307 hardware
 892           watchdog cards as found on the SC1200. This watchdog is mainly used
 893           for power management purposes and can be used to power down the device
 894           during inactivity periods (includes interrupt activity monitoring).
 895
 896           To compile this driver as a module, choose M here: the
 897           module will be called sc1200wdt.
 898
 899           Most people will say N.
 900
 901 config SCx200_WDT
 902         tristate "National Semiconductor SCx200 Watchdog"
 903         depends on SCx200 && PCI
 904         help
 905           Enable the built-in watchdog timer support on the National
 906           Semiconductor SCx200 processors.
 907
 908           If compiled as a module, it will be called scx200_wdt.
 909
 910 config PC87413_WDT
 911         tristate "NS PC87413 watchdog"
 912         depends on X86
 913         ---help---
 914           This is the driver for the hardware watchdog on the PC87413 chipset
 915           This watchdog simply watches your kernel to make sure it doesn't
 916           freeze, and if it does, it reboots your computer after a certain
 917           amount of time.
 918
 919           To compile this driver as a module, choose M here: the
 920           module will be called pc87413_wdt.
 921
 922           Most people will say N.
 923
 924 config NV_TCO
 925         tristate "nVidia TCO Timer/Watchdog"
 926         depends on X86 && PCI
 927         ---help---
 928           Hardware driver for the TCO timer built into the nVidia Hub family
 929           (such as the MCP51).  The TCO (Total Cost of Ownership) timer is a
 930           watchdog timer that will reboot the machine after its second
 931           expiration. The expiration time can be configured with the
 932           "heartbeat" parameter.
 933
 934           On some motherboards the driver may fail to reset the chipset's
 935           NO_REBOOT flag which prevents the watchdog from rebooting the
 936           machine. If this is the case you will get a kernel message like
 937           "failed to reset NO_REBOOT flag, reboot disabled by hardware".
 938
 939           To compile this driver as a module, choose M here: the
 940           module will be called nv_tco.
 941
 942 config RDC321X_WDT
 943         tristate "RDC R-321x SoC watchdog"
 944         depends on X86_RDC321X
 945         help
 946           This is the driver for the built in hardware watchdog
 947           in the RDC R-321x SoC.
 948
 949           To compile this driver as a module, choose M here: the
 950           module will be called rdc321x_wdt.
 951
 952 config 60XX_WDT
 953         tristate "SBC-60XX Watchdog Timer"
 954         depends on X86
 955         help
 956           This driver can be used with the watchdog timer found on some
 957           single board computers, namely the 6010 PII based computer.
 958           It may well work with other cards.  It reads port 0x443 to enable
 959           and re-set the watchdog timer, and reads port 0x45 to disable
 960           the watchdog.  If you have a card that behave in similar ways,
 961           you can probably make this driver work with your card as well.
 962
 963           You can compile this driver directly into the kernel, or use
 964           it as a module.  The module will be called sbc60xxwdt.
 965
 966 config SBC8360_WDT
 967         tristate "SBC8360 Watchdog Timer"
 968         depends on X86_32
 969         ---help---
 970
 971           This is the driver for the hardware watchdog on the SBC8360 Single
 972           Board Computer produced by Axiomtek Co., Ltd. (www.axiomtek.com).
 973
 974           To compile this driver as a module, choose M here: the
 975           module will be called sbc8360.
 976
 977           Most people will say N.
 978
 979 config SBC7240_WDT
 980         tristate "SBC Nano 7240 Watchdog Timer"
 981         depends on X86_32 && !UML
 982         ---help---
 983           This is the driver for the hardware watchdog found on the IEI
 984           single board computers EPIC Nano 7240 (and likely others). This
 985           watchdog simply watches your kernel to make sure it doesn't freeze,
 986           and if it does, it reboots your computer after a certain amount of
 987           time.
 988
 989           To compile this driver as a module, choose M here: the
 990           module will be called sbc7240_wdt.
 991
 992 config CPU5_WDT
 993         tristate "SMA CPU5 Watchdog"
 994         depends on X86
 995         ---help---
 996           TBD.
 997           To compile this driver as a module, choose M here: the
 998           module will be called cpu5wdt.
 999
1000 config SMSC_SCH311X_WDT
1001         tristate "SMSC SCH311X Watchdog Timer"
1002         depends on X86
1003         ---help---
1004           This is the driver for the hardware watchdog timer on the
1005           SMSC SCH3112, SCH3114 and SCH3116 Super IO chipset
1006           (LPC IO with 8042 KBC, Reset Generation, HWM and multiple
1007           serial ports).
1008
1009           To compile this driver as a module, choose M here: the
1010           module will be called sch311x_wdt.
1011
1012 config SMSC37B787_WDT
1013         tristate "Winbond SMsC37B787 Watchdog Timer"
1014         depends on X86
1015         ---help---
1016           This is the driver for the hardware watchdog component on the
1017           Winbond SMsC37B787 chipset as used on the NetRunner Mainboard
1018           from Vision Systems and maybe others.
1019
1020           This watchdog simply watches your kernel to make sure it doesn't
1021           freeze, and if it does, it reboots your computer after a certain
1022           amount of time.
1023
1024           Usually a userspace daemon will notify the kernel WDT driver that
1025           userspace is still alive, at regular intervals.
1026
1027           To compile this driver as a module, choose M here: the
1028           module will be called smsc37b787_wdt.
1029
1030           Most people will say N.
1031
1032 config VIA_WDT
1033         tristate "VIA Watchdog Timer"
1034         depends on X86 && PCI
1035         select WATCHDOG_CORE
1036         ---help---
1037         This is the driver for the hardware watchdog timer on VIA
1038         southbridge chipset CX700, VX800/VX820 or VX855/VX875.
1039
1040         To compile this driver as a module, choose M here; the module
1041         will be called via_wdt.
1042
1043         Most people will say N.
1044
1045 config W83627HF_WDT
1046         tristate "Watchdog timer for W83627HF/W83627DHG and compatibles"
1047         depends on X86
1048         select WATCHDOG_CORE
1049         ---help---
1050           This is the driver for the hardware watchdog on the following
1051           Super I/O chips.
1052                 W83627DHG/DHG-P/EHF/EHG/F/G/HF/S/SF/THF/UHG/UG
1053                 W83637HF
1054                 W83667HG/HG-B
1055                 W83687THF
1056                 W83697HF
1057                 W83697UG
1058                 NCT6775
1059                 NCT6776
1060                 NCT6779
1061                 NCT6791
1062                 NCT6792
1063
1064           This watchdog simply watches your kernel to make sure it doesn't
1065           freeze, and if it does, it reboots your computer after a certain
1066           amount of time.
1067
1068           To compile this driver as a module, choose M here: the
1069           module will be called w83627hf_wdt.
1070
1071           Most people will say N.
1072
1073 config W83877F_WDT
1074         tristate "W83877F (EMACS) Watchdog Timer"
1075         depends on X86
1076         ---help---
1077           This is the driver for the hardware watchdog on the W83877F chipset
1078           as used in EMACS PC-104 motherboards (and likely others).  This
1079           watchdog simply watches your kernel to make sure it doesn't freeze,
1080           and if it does, it reboots your computer after a certain amount of
1081           time.
1082
1083           To compile this driver as a module, choose M here: the
1084           module will be called w83877f_wdt.
1085
1086           Most people will say N.
1087
1088 config W83977F_WDT
1089         tristate "W83977F (PCM-5335) Watchdog Timer"
1090         depends on X86
1091         ---help---
1092           This is the driver for the hardware watchdog on the W83977F I/O chip
1093           as used in AAEON's PCM-5335 SBC (and likely others).  This
1094           watchdog simply watches your kernel to make sure it doesn't freeze,
1095           and if it does, it reboots your computer after a certain amount of
1096           time.
1097
1098           To compile this driver as a module, choose M here: the
1099           module will be called w83977f_wdt.
1100
1101 config MACHZ_WDT
1102         tristate "ZF MachZ Watchdog"
1103         depends on X86
1104         ---help---
1105           If you are using a ZF Micro MachZ processor, say Y here, otherwise
1106           N.  This is the driver for the watchdog timer built-in on that
1107           processor using ZF-Logic interface.  This watchdog simply watches
1108           your kernel to make sure it doesn't freeze, and if it does, it
1109           reboots your computer after a certain amount of time.
1110
1111           To compile this driver as a module, choose M here: the
1112           module will be called machzwd.
1113
1114 config SBC_EPX_C3_WATCHDOG
1115         tristate "Winsystems SBC EPX-C3 watchdog"
1116         depends on X86
1117         ---help---
1118           This is the driver for the built-in watchdog timer on the EPX-C3
1119           Single-board computer made by Winsystems, Inc.
1120
1121           *Note*: This hardware watchdog is not probeable and thus there
1122           is no way to know if writing to its IO address will corrupt
1123           your system or have any real effect.  The only way to be sure
1124           that this driver does what you want is to make sure you
1125           are running it on an EPX-C3 from Winsystems with the watchdog
1126           timer at IO address 0x1ee and 0x1ef.  It will write to both those
1127           IO ports.  Basically, the assumption is made that if you compile
1128           this driver into your kernel and/or load it as a module, that you
1129           know what you are doing and that you are in fact running on an
1130           EPX-C3 board!
1131
1132           To compile this driver as a module, choose M here: the
1133           module will be called sbc_epx_c3.
1134
1135 # M32R Architecture
1136
1137 # M68K Architecture
1138
1139 config M54xx_WATCHDOG
1140         tristate "MCF54xx watchdog support"
1141         depends on M548x
1142         help
1143           To compile this driver as a module, choose M here: the
1144           module will be called m54xx_wdt.
1145
1146 # MicroBlaze Architecture
1147
1148 # MIPS Architecture
1149
1150 config ATH79_WDT
1151         tristate "Atheros AR71XX/AR724X/AR913X hardware watchdog"
1152         depends on ATH79
1153         help
1154           Hardware driver for the built-in watchdog timer on the Atheros
1155           AR71XX/AR724X/AR913X SoCs.
1156
1157 config BCM47XX_WDT
1158         tristate "Broadcom BCM47xx Watchdog Timer"
1159         depends on BCM47XX || ARCH_BCM_5301X
1160         select WATCHDOG_CORE
1161         help
1162           Hardware driver for the Broadcom BCM47xx Watchdog Timer.
1163
1164 config RC32434_WDT
1165         tristate "IDT RC32434 SoC Watchdog Timer"
1166         depends on MIKROTIK_RB532
1167         help
1168           Hardware driver for the IDT RC32434 SoC built-in
1169           watchdog timer.
1170
1171           To compile this driver as a module, choose M here: the
1172           module will be called rc32434_wdt.
1173
1174 config INDYDOG
1175         tristate "Indy/I2 Hardware Watchdog"
1176         depends on SGI_HAS_INDYDOG
1177         help
1178           Hardware driver for the Indy's/I2's watchdog. This is a
1179           watchdog timer that will reboot the machine after a 60 second
1180           timer expired and no process has written to /dev/watchdog during
1181           that time.
1182
1183 config JZ4740_WDT
1184         tristate "Ingenic jz4740 SoC hardware watchdog"
1185         depends on MACH_JZ4740
1186         select WATCHDOG_CORE
1187         help
1188           Hardware driver for the built-in watchdog timer on Ingenic jz4740 SoCs.
1189
1190 config WDT_MTX1
1191         tristate "MTX-1 Hardware Watchdog"
1192         depends on MIPS_MTX1
1193         help
1194           Hardware driver for the MTX-1 boards. This is a watchdog timer that
1195           will reboot the machine after a 100 seconds timer expired.
1196
1197 config PNX833X_WDT
1198         tristate "PNX833x Hardware Watchdog"
1199         depends on SOC_PNX8335
1200         help
1201           Hardware driver for the PNX833x's watchdog. This is a
1202           watchdog timer that will reboot the machine after a programmable
1203           timer has expired and no process has written to /dev/watchdog during
1204           that time.
1205
1206 config SIBYTE_WDOG
1207         tristate "Sibyte SoC hardware watchdog"
1208         depends on CPU_SB1
1209         help
1210           Watchdog driver for the built in watchdog hardware in Sibyte
1211           SoC processors.  There are apparently two watchdog timers
1212           on such processors; this driver supports only the first one,
1213           because currently Linux only supports exporting one watchdog
1214           to userspace.
1215
1216           To compile this driver as a loadable module, choose M here.
1217           The module will be called sb_wdog.
1218
1219 config AR7_WDT
1220         tristate "TI AR7 Watchdog Timer"
1221         depends on AR7
1222         help
1223           Hardware driver for the TI AR7 Watchdog Timer.
1224
1225 config TXX9_WDT
1226         tristate "Toshiba TXx9 Watchdog Timer"
1227         depends on CPU_TX39XX || CPU_TX49XX
1228         select WATCHDOG_CORE
1229         help
1230           Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs.
1231
1232 config OCTEON_WDT
1233         tristate "Cavium OCTEON SOC family Watchdog Timer"
1234         depends on CAVIUM_OCTEON_SOC
1235         default y
1236         select WATCHDOG_CORE
1237         select EXPORT_UASM if OCTEON_WDT = m
1238         help
1239           Hardware driver for OCTEON's on chip watchdog timer.
1240           Enables the watchdog for all cores running Linux. It
1241           installs a NMI handler and pokes the watchdog based on an
1242           interrupt.  On first expiration of the watchdog, the
1243           interrupt handler pokes it.  The second expiration causes an
1244           NMI that prints a message. The third expiration causes a
1245           global soft reset.
1246
1247           When userspace has /dev/watchdog open, no poking is done
1248           from the first interrupt, it is then only poked when the
1249           device is written.
1250
1251 config BCM63XX_WDT
1252         tristate "Broadcom BCM63xx hardware watchdog"
1253         depends on BCM63XX
1254         help
1255           Watchdog driver for the built in watchdog hardware in Broadcom
1256           BCM63xx SoC.
1257
1258           To compile this driver as a loadable module, choose M here.
1259           The module will be called bcm63xx_wdt.
1260
1261 config BCM2835_WDT
1262         tristate "Broadcom BCM2835 hardware watchdog"
1263         depends on ARCH_BCM2835
1264         select WATCHDOG_CORE
1265         help
1266           Watchdog driver for the built in watchdog hardware in Broadcom
1267           BCM2835 SoC.
1268
1269           To compile this driver as a loadable module, choose M here.
1270           The module will be called bcm2835_wdt.
1271
1272 config BCM_KONA_WDT
1273         tristate "BCM Kona Watchdog"
1274         depends on ARCH_BCM_MOBILE
1275         select WATCHDOG_CORE
1276         help
1277           Support for the watchdog timer on the following Broadcom BCM281xx
1278           family, which includes BCM11130, BCM11140, BCM11351, BCM28145 and
1279           BCM28155 variants.
1280
1281           Say 'Y' or 'M' here to enable the driver. The module will be called
1282           bcm_kona_wdt.
1283
1284 config BCM_KONA_WDT_DEBUG
1285         bool "DEBUGFS support for BCM Kona Watchdog"
1286         depends on BCM_KONA_WDT
1287         help
1288           If enabled, adds /sys/kernel/debug/bcm_kona_wdt/info which provides
1289           access to the driver's internal data structures as well as watchdog
1290           timer hardware registres.
1291
1292           If in doubt, say 'N'.
1293
1294 config IMGPDC_WDT
1295         tristate "Imagination Technologies PDC Watchdog Timer"
1296         depends on HAS_IOMEM
1297         depends on METAG || MIPS || COMPILE_TEST
1298         help
1299           Driver for Imagination Technologies PowerDown Controller
1300           Watchdog Timer.
1301
1302           To compile this driver as a loadable module, choose M here.
1303           The module will be called imgpdc_wdt.
1304
1305 config LANTIQ_WDT
1306         tristate "Lantiq SoC watchdog"
1307         depends on LANTIQ
1308         help
1309           Hardware driver for the Lantiq SoC Watchdog Timer.
1310
1311 config RALINK_WDT
1312         tristate "Ralink SoC watchdog"
1313         select WATCHDOG_CORE
1314         depends on RALINK
1315         help
1316           Hardware driver for the Ralink SoC Watchdog Timer.
1317
1318 # PARISC Architecture
1319
1320 # POWERPC Architecture
1321
1322 config GEF_WDT
1323         tristate "GE Watchdog Timer"
1324         depends on GE_FPGA
1325         ---help---
1326           Watchdog timer found in a number of GE single board computers.
1327
1328 config MPC5200_WDT
1329         bool "MPC52xx Watchdog Timer"
1330         depends on PPC_MPC52xx
1331         help
1332           Use General Purpose Timer (GPT) 0 on the MPC5200 as Watchdog.
1333
1334 config 8xxx_WDT
1335         tristate "MPC8xxx Platform Watchdog Timer"
1336         depends on PPC_8xx || PPC_83xx || PPC_86xx
1337         select WATCHDOG_CORE
1338         help
1339           This driver is for a SoC level watchdog that exists on some
1340           Freescale PowerPC processors. So far this driver supports:
1341           - MPC8xx watchdogs
1342           - MPC83xx watchdogs
1343           - MPC86xx watchdogs
1344
1345           For BookE processors (MPC85xx) use the BOOKE_WDT driver instead.
1346
1347 config MV64X60_WDT
1348         tristate "MV64X60 (Marvell Discovery) Watchdog Timer"
1349         depends on MV64X60
1350
1351 config PIKA_WDT
1352         tristate "PIKA FPGA Watchdog"
1353         depends on WARP
1354         default y
1355         help
1356           This enables the watchdog in the PIKA FPGA. Currently used on
1357           the Warp platform.
1358
1359 config BOOKE_WDT
1360         tristate "PowerPC Book-E Watchdog Timer"
1361         depends on BOOKE || 4xx
1362         select WATCHDOG_CORE
1363         ---help---
1364           Watchdog driver for PowerPC Book-E chips, such as the Freescale
1365           MPC85xx SOCs and the IBM PowerPC 440.
1366
1367           Please see Documentation/watchdog/watchdog-api.txt for
1368           more information.
1369
1370 config BOOKE_WDT_DEFAULT_TIMEOUT
1371         int "PowerPC Book-E Watchdog Timer Default Timeout"
1372         depends on BOOKE_WDT
1373         default 38 if PPC_FSL_BOOK3E
1374         range 0 63 if PPC_FSL_BOOK3E
1375         default 3 if !PPC_FSL_BOOK3E
1376         range 0 3 if !PPC_FSL_BOOK3E
1377         help
1378           Select the default watchdog timer period to be used by the PowerPC
1379           Book-E watchdog driver.  A watchdog "event" occurs when the bit
1380           position represented by this number transitions from zero to one.
1381
1382           For Freescale Book-E processors, this is a number between 0 and 63.
1383           For other Book-E processors, this is a number between 0 and 3.
1384
1385           The value can be overridden by the wdt_period command-line parameter.
1386
1387 config MEN_A21_WDT
1388        tristate "MEN A21 VME CPU Carrier Board Watchdog Timer"
1389        select WATCHDOG_CORE
1390        depends on GPIOLIB || COMPILE_TEST
1391        help
1392         Watchdog driver for MEN A21 VMEbus CPU Carrier Boards.
1393
1394         The driver can also be built as a module. If so, the module will be
1395         called mena21_wdt.
1396
1397         If unsure select N here.
1398
1399 # PPC64 Architecture
1400
1401 config WATCHDOG_RTAS
1402         tristate "RTAS watchdog"
1403         depends on PPC_RTAS
1404         help
1405           This driver adds watchdog support for the RTAS watchdog.
1406
1407           To compile this driver as a module, choose M here. The module
1408           will be called wdrtas.
1409
1410 # S390 Architecture
1411
1412 config DIAG288_WATCHDOG
1413         tristate "System z diag288 Watchdog"
1414         depends on S390
1415         select WATCHDOG_CORE
1416         help
1417           IBM s/390 and zSeries machines running under z/VM 5.1 or later
1418           provide a virtual watchdog timer to their guest that cause a
1419           user define Control Program command to be executed after a
1420           timeout.
1421           LPAR provides a very similar interface. This driver handles
1422           both.
1423
1424           To compile this driver as a module, choose M here. The module
1425           will be called diag288_wdt.
1426
1427 # SUPERH (sh + sh64) Architecture
1428
1429 config SH_WDT
1430         tristate "SuperH Watchdog"
1431         depends on SUPERH && (CPU_SH3 || CPU_SH4)
1432         select WATCHDOG_CORE
1433         help
1434           This driver adds watchdog support for the integrated watchdog in the
1435           SuperH processors. If you have one of these processors and wish
1436           to have watchdog support enabled, say Y, otherwise say N.
1437
1438           As a side note, saying Y here will automatically boost HZ to 1000
1439           so that the timer has a chance to clear the overflow counter. On
1440           slower systems (such as the SH-2 and SH-3) this will likely yield
1441           some performance issues. As such, the WDT should be avoided here
1442           unless it is absolutely necessary.
1443
1444           To compile this driver as a module, choose M here: the
1445           module will be called shwdt.
1446
1447 # SPARC Architecture
1448
1449 # SPARC64 Architecture
1450
1451 config WATCHDOG_CP1XXX
1452         tristate "CP1XXX Hardware Watchdog support"
1453         depends on SPARC64 && PCI
1454         ---help---
1455           This is the driver for the hardware watchdog timers present on
1456           Sun Microsystems CompactPCI models CP1400 and CP1500.
1457
1458           To compile this driver as a module, choose M here: the
1459           module will be called cpwatchdog.
1460
1461           If you do not have a CompactPCI model CP1400 or CP1500, or
1462           another UltraSPARC-IIi-cEngine boardset with hardware watchdog,
1463           you should say N to this option.
1464
1465 config WATCHDOG_RIO
1466         tristate "RIO Hardware Watchdog support"
1467         depends on SPARC64 && PCI
1468         help
1469           Say Y here to support the hardware watchdog capability on Sun RIO
1470           machines.  The watchdog timeout period is normally one minute but
1471           can be changed with a boot-time parameter.
1472
1473 # XTENSA Architecture
1474
1475 # Xen Architecture
1476
1477 config XEN_WDT
1478         tristate "Xen Watchdog support"
1479         depends on XEN
1480         help
1481           Say Y here to support the hypervisor watchdog capability provided
1482           by Xen 4.0 and newer.  The watchdog timeout period is normally one
1483           minute but can be changed with a boot-time parameter.
1484
1485 config UML_WATCHDOG
1486         tristate "UML watchdog"
1487         depends on UML
1488
1489 #
1490 # ISA-based Watchdog Cards
1491 #
1492
1493 comment "ISA-based Watchdog Cards"
1494         depends on ISA
1495
1496 config PCWATCHDOG
1497         tristate "Berkshire Products ISA-PC Watchdog"
1498         depends on ISA
1499         ---help---
1500           This is the driver for the Berkshire Products ISA-PC Watchdog card.
1501           This card simply watches your kernel to make sure it doesn't freeze,
1502           and if it does, it reboots your computer after a certain amount of
1503           time. This driver is like the WDT501 driver but for different
1504           hardware. Please read <file:Documentation/watchdog/pcwd-watchdog.txt>. The PC
1505           watchdog cards can be ordered from <http://www.berkprod.com/>.
1506
1507           To compile this driver as a module, choose M here: the
1508           module will be called pcwd.
1509
1510           Most people will say N.
1511
1512 config MIXCOMWD
1513         tristate "Mixcom Watchdog"
1514         depends on ISA
1515         ---help---
1516           This is a driver for the Mixcom hardware watchdog cards.  This
1517           watchdog simply watches your kernel to make sure it doesn't freeze,
1518           and if it does, it reboots your computer after a certain amount of
1519           time.
1520
1521           To compile this driver as a module, choose M here: the
1522           module will be called mixcomwd.
1523
1524           Most people will say N.
1525
1526 config WDT
1527         tristate "WDT Watchdog timer"
1528         depends on ISA
1529         ---help---
1530           If you have a WDT500P or WDT501P watchdog board, say Y here,
1531           otherwise N. It is not possible to probe for this board, which means
1532           that you have to inform the kernel about the IO port and IRQ that
1533           is needed (you can do this via the io and irq parameters)
1534
1535           To compile this driver as a module, choose M here: the
1536           module will be called wdt.
1537
1538 #
1539 # PCI-based Watchdog Cards
1540 #
1541
1542 comment "PCI-based Watchdog Cards"
1543         depends on PCI
1544
1545 config PCIPCWATCHDOG
1546         tristate "Berkshire Products PCI-PC Watchdog"
1547         depends on PCI
1548         ---help---
1549           This is the driver for the Berkshire Products PCI-PC Watchdog card.
1550           This card simply watches your kernel to make sure it doesn't freeze,
1551           and if it does, it reboots your computer after a certain amount of
1552           time. The card can also monitor the internal temperature of the PC.
1553           More info is available at <http://www.berkprod.com/pci_pc_watchdog.htm>.
1554
1555           To compile this driver as a module, choose M here: the
1556           module will be called pcwd_pci.
1557
1558           Most people will say N.
1559
1560 config WDTPCI
1561         tristate "PCI-WDT500/501 Watchdog timer"
1562         depends on PCI
1563         ---help---
1564           If you have a PCI-WDT500/501 watchdog board, say Y here, otherwise N.
1565
1566           If you have a PCI-WDT501 watchdog board then you can enable the
1567           temperature sensor by setting the type parameter to 501.
1568
1569           If you want to enable the Fan Tachometer on the PCI-WDT501, then you
1570           can do this via the tachometer parameter. Only do this if you have a
1571           fan tachometer actually set up.
1572
1573           To compile this driver as a module, choose M here: the
1574           module will be called wdt_pci.
1575
1576 #
1577 # USB-based Watchdog Cards
1578 #
1579
1580 comment "USB-based Watchdog Cards"
1581         depends on USB
1582
1583 config USBPCWATCHDOG
1584         tristate "Berkshire Products USB-PC Watchdog"
1585         depends on USB
1586         ---help---
1587           This is the driver for the Berkshire Products USB-PC Watchdog card.
1588           This card simply watches your kernel to make sure it doesn't freeze,
1589           and if it does, it reboots your computer after a certain amount of
1590           time. The card can also monitor the internal temperature of the PC.
1591           More info is available at <http://www.berkprod.com/usb_pc_watchdog.htm>.
1592
1593           To compile this driver as a module, choose M here: the
1594           module will be called pcwd_usb.
1595
1596           Most people will say N.
1597
1598 endif # WATCHDOG