drivers/watchdog/Kconfig

   1 #
   2 # Watchdog device configuration
   3 #
   4
   5 menuconfig WATCHDOG
   6         bool "Watchdog Timer Support"
   7         ---help---
   8           If you say Y here (and to one of the following options) and create a
   9           character special file /dev/watchdog with major number 10 and minor
  10           number 130 using mknod ("man mknod"), you will get a watchdog, i.e.:
  11           subsequently opening the file and then failing to write to it for
  12           longer than 1 minute will result in rebooting the machine. This
  13           could be useful for a networked machine that needs to come back
  14           on-line as fast as possible after a lock-up. There's both a watchdog
  15           implementation entirely in software (which can sometimes fail to
  16           reboot the machine) and a driver for hardware watchdog boards, which
  17           are more robust and can also keep track of the temperature inside
  18           your computer. For details, read
  19           <file:Documentation/watchdog/watchdog-api.txt> in the kernel source.
  20
  21           The watchdog is usually used together with the watchdog daemon
  22           which is available from
  23           <ftp://ibiblio.org/pub/Linux/system/daemons/watchdog/>. This daemon can
  24           also monitor NFS connections and can reboot the machine when the process
  25           table is full.
  26
  27           If unsure, say N.
  28
  29 if WATCHDOG
  30
  31 config WATCHDOG_NOWAYOUT
  32         bool "Disable watchdog shutdown on close"
  33         help
  34           The default watchdog behaviour (which you get if you say N here) is
  35           to stop the timer if the process managing it closes the file
  36           /dev/watchdog. It's always remotely possible that this process might
  37           get killed. If you say Y here, the watchdog cannot be stopped once
  38           it has been started.
  39
  40 #
  41 # General Watchdog drivers
  42 #
  43
  44 comment "Watchdog Device Drivers"
  45
  46 # Architecture Independent
  47
  48 config SOFT_WATCHDOG
  49         tristate "Software watchdog"
  50         help
  51           A software monitoring watchdog. This will fail to reboot your system
  52           from some situations that the hardware watchdog will recover
  53           from. Equally it's a lot cheaper to install.
  54
  55           To compile this driver as a module, choose M here: the
  56           module will be called softdog.
  57
  58 config WM831X_WATCHDOG
  59         tristate "WM831x watchdog"
  60         depends on MFD_WM831X
  61         help
  62           Support for the watchdog in the WM831x AudioPlus PMICs.  When
  63           the watchdog triggers the system will be reset.
  64
  65 config WM8350_WATCHDOG
  66         tristate "WM8350 watchdog"
  67         depends on MFD_WM8350
  68         help
  69           Support for the watchdog in the WM8350 AudioPlus PMIC.  When
  70           the watchdog triggers the system will be reset.
  71
  72 # ALPHA Architecture
  73
  74 # ARM Architecture
  75
  76 config ARM_SP805_WATCHDOG
  77         tristate "ARM SP805 Watchdog"
  78         depends on ARM_AMBA
  79         help
  80           ARM Primecell SP805 Watchdog timer. This will reboot your system when
  81           the timeout is reached.
  82
  83 config AT91RM9200_WATCHDOG
  84         tristate "AT91RM9200 watchdog"
  85         depends on ARCH_AT91RM9200
  86         help
  87           Watchdog timer embedded into AT91RM9200 chips. This will reboot your
  88           system when the timeout is reached.
  89
  90 config AT91SAM9X_WATCHDOG
  91         tristate "AT91SAM9X / AT91CAP9 watchdog"
  92         depends on ARCH_AT91 && !ARCH_AT91RM9200
  93         help
  94           Watchdog timer embedded into AT91SAM9X and AT91CAP9 chips. This will
  95           reboot your system when the timeout is reached.
  96
  97 config 21285_WATCHDOG
  98         tristate "DC21285 watchdog"
  99         depends on FOOTBRIDGE
 100         help
 101           The Intel Footbridge chip contains a built-in watchdog circuit. Say Y
 102           here if you wish to use this. Alternatively say M to compile the
 103           driver as a module, which will be called wdt285.
 104
 105           This driver does not work on all machines. In particular, early CATS
 106           boards have hardware problems that will cause the machine to simply
 107           lock up if the watchdog fires.
 108
 109           "If in doubt, leave it out" - say N.
 110
 111 config 977_WATCHDOG
 112         tristate "NetWinder WB83C977 watchdog"
 113         depends on FOOTBRIDGE && ARCH_NETWINDER
 114         help
 115           Say Y here to include support for the WB977 watchdog included in
 116           NetWinder machines. Alternatively say M to compile the driver as
 117           a module, which will be called wdt977.
 118
 119           Not sure? It's safe to say N.
 120
 121 config IXP2000_WATCHDOG
 122         tristate "IXP2000 Watchdog"
 123         depends on ARCH_IXP2000
 124         help
 125           Say Y here if to include support for the watchdog timer
 126           in the Intel IXP2000(2400, 2800, 2850) network processors.
 127           This driver can be built as a module by choosing M. The module
 128           will be called ixp2000_wdt.
 129
 130           Say N if you are unsure.
 131
 132 config IXP4XX_WATCHDOG
 133         tristate "IXP4xx Watchdog"
 134         depends on ARCH_IXP4XX
 135         help
 136           Say Y here if to include support for the watchdog timer
 137           in the Intel IXP4xx network processors. This driver can
 138           be built as a module by choosing M. The module will
 139           be called ixp4xx_wdt.
 140
 141           Note: The internal IXP4xx watchdog does a soft CPU reset
 142           which doesn't reset any peripherals. There are circumstances
 143           where the watchdog will fail to reset the board correctly
 144           (e.g., if the boot ROM is in an unreadable state).
 145
 146           Say N if you are unsure.
 147
 148 config KS8695_WATCHDOG
 149         tristate "KS8695 watchdog"
 150         depends on ARCH_KS8695
 151         help
 152           Watchdog timer embedded into KS8695 processor. This will reboot your
 153           system when the timeout is reached.
 154
 155 config HAVE_S3C2410_WATCHDOG
 156         bool
 157         help
 158           This will include watchdog timer support for Samsung SoCs. If
 159           you want to include watchdog support for any machine, kindly
 160           select this in the respective mach-XXXX/Kconfig file.
 161
 162 config S3C2410_WATCHDOG
 163         tristate "S3C2410 Watchdog"
 164         depends on ARCH_S3C2410 || HAVE_S3C2410_WATCHDOG
 165         help
 166           Watchdog timer block in the Samsung SoCs. This will reboot
 167           the system when the timer expires with the watchdog enabled.
 168
 169           The driver is limited by the speed of the system's PCLK
 170           signal, so with reasonably fast systems (PCLK around 50-66MHz)
 171           then watchdog intervals of over approximately 20seconds are
 172           unavailable.
 173
 174           The driver can be built as a module by choosing M, and will
 175           be called s3c2410_wdt
 176
 177 config SA1100_WATCHDOG
 178         tristate "SA1100/PXA2xx watchdog"
 179         depends on ARCH_SA1100 || ARCH_PXA
 180         help
 181           Watchdog timer embedded into SA11x0 and PXA2xx chips. This will
 182           reboot your system when timeout is reached.
 183
 184           NOTE: once enabled, this timer cannot be disabled.
 185
 186           To compile this driver as a module, choose M here: the
 187           module will be called sa1100_wdt.
 188
 189 config MPCORE_WATCHDOG
 190         tristate "MPcore watchdog"
 191         depends on HAVE_ARM_TWD
 192         help
 193           Watchdog timer embedded into the MPcore system.
 194
 195           To compile this driver as a module, choose M here: the
 196           module will be called mpcore_wdt.
 197
 198 config EP93XX_WATCHDOG
 199         tristate "EP93xx Watchdog"
 200         depends on ARCH_EP93XX
 201         help
 202           Say Y here if to include support for the watchdog timer
 203           embedded in the Cirrus Logic EP93xx family of devices.
 204
 205           To compile this driver as a module, choose M here: the
 206           module will be called ep93xx_wdt.
 207
 208 config OMAP_WATCHDOG
 209         tristate "OMAP Watchdog"
 210         depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS
 211         help
 212           Support for TI OMAP1610/OMAP1710/OMAP2420/OMAP3430/OMAP4430 watchdog.  Say 'Y'
 213           here to enable the OMAP1610/OMAP1710/OMAP2420/OMAP3430/OMAP4430 watchdog timer.
 214
 215 config PNX4008_WATCHDOG
 216         tristate "PNX4008 and LPC32XX Watchdog"
 217         depends on ARCH_PNX4008 || ARCH_LPC32XX
 218         help
 219           Say Y here if to include support for the watchdog timer
 220           in the PNX4008 or LPC32XX processor.
 221           This driver can be built as a module by choosing M. The module
 222           will be called pnx4008_wdt.
 223
 224           Say N if you are unsure.
 225
 226 config IOP_WATCHDOG
 227         tristate "IOP Watchdog"
 228         depends on PLAT_IOP
 229         select WATCHDOG_NOWAYOUT if (ARCH_IOP32X || ARCH_IOP33X)
 230         help
 231           Say Y here if to include support for the watchdog timer
 232           in the Intel IOP3XX & IOP13XX I/O Processors.  This driver can
 233           be built as a module by choosing M. The module will
 234           be called iop_wdt.
 235
 236           Note: The IOP13XX watchdog does an Internal Bus Reset which will
 237           affect both cores and the peripherals of the IOP.  The ATU-X
 238           and/or ATUe configuration registers will remain intact, but if
 239           operating as an Root Complex and/or Central Resource, the PCI-X
 240           and/or PCIe busses will also be reset.  THIS IS A VERY BIG HAMMER.
 241
 242 config DAVINCI_WATCHDOG
 243         tristate "DaVinci watchdog"
 244         depends on ARCH_DAVINCI
 245         help
 246           Say Y here if to include support for the watchdog timer
 247           in the DaVinci DM644x/DM646x processors.
 248           To compile this driver as a module, choose M here: the
 249           module will be called davinci_wdt.
 250
 251           NOTE: once enabled, this timer cannot be disabled.
 252           Say N if you are unsure.
 253
 254 config ORION_WATCHDOG
 255         tristate "Orion watchdog"
 256         depends on ARCH_ORION5X || ARCH_KIRKWOOD
 257         help
 258           Say Y here if to include support for the watchdog timer
 259           in the Marvell Orion5x and Kirkwood ARM SoCs.
 260           To compile this driver as a module, choose M here: the
 261           module will be called orion_wdt.
 262
 263 config COH901327_WATCHDOG
 264         bool "ST-Ericsson COH 901 327 watchdog"
 265         depends on ARCH_U300
 266         default y if MACH_U300
 267         help
 268           Say Y here to include Watchdog timer support for the
 269           watchdog embedded into the ST-Ericsson U300 series platforms.
 270           This watchdog is used to reset the system and thus cannot be
 271           compiled as a module.
 272
 273 config TWL4030_WATCHDOG
 274         tristate "TWL4030 Watchdog"
 275         depends on TWL4030_CORE
 276         help
 277           Support for TI TWL4030 watchdog.  Say 'Y' here to enable the
 278           watchdog timer support for TWL4030 chips.
 279
 280 config STMP3XXX_WATCHDOG
 281         tristate "Freescale STMP3XXX watchdog"
 282         depends on ARCH_STMP3XXX
 283         help
 284           Say Y here if to include support for the watchdog timer
 285           for the Sigmatel STMP37XX/378X SoC.
 286           To compile this driver as a module, choose M here: the
 287           module will be called stmp3xxx_wdt.
 288
 289 config NUC900_WATCHDOG
 290         tristate "Nuvoton NUC900 watchdog"
 291         depends on ARCH_W90X900
 292         help
 293           Say Y here if to include support for the watchdog timer
 294           for the Nuvoton NUC900 series SoCs.
 295           To compile this driver as a module, choose M here: the
 296           module will be called nuc900_wdt.
 297
 298 config ADX_WATCHDOG
 299         tristate "Avionic Design Xanthos watchdog"
 300         depends on ARCH_PXA_ADX
 301         help
 302           Say Y here if you want support for the watchdog timer on Avionic
 303           Design Xanthos boards.
 304
 305 config TS72XX_WATCHDOG
 306         tristate "TS-72XX SBC Watchdog"
 307         depends on MACH_TS72XX
 308         help
 309           Technologic Systems TS-7200, TS-7250 and TS-7260 boards have
 310           watchdog timer implemented in a external CPLD chip. Say Y here
 311           if you want to support for the watchdog timer on TS-72XX boards.
 312
 313           To compile this driver as a module, choose M here: the
 314           module will be called ts72xx_wdt.
 315
 316 config MAX63XX_WATCHDOG
 317         tristate "Max63xx watchdog"
 318         depends on ARM && HAS_IOMEM
 319         help
 320           Support for memory mapped max63{69,70,71,72,73,74} watchdog timer.
 321
 322 config IMX2_WDT
 323         tristate "IMX2+ Watchdog"
 324         depends on ARCH_MX2 || ARCH_MX25 || ARCH_MX3 || ARCH_MX5
 325         help
 326           This is the driver for the hardware watchdog
 327           on the Freescale IMX2 and later processors.
 328           If you have one of these processors and wish to have
 329           watchdog support enabled, say Y, otherwise say N.
 330
 331           To compile this driver as a module, choose M here: the
 332           module will be called imx2_wdt.
 333
 334 # AVR32 Architecture
 335
 336 config AT32AP700X_WDT
 337         tristate "AT32AP700x watchdog"
 338         depends on CPU_AT32AP700X
 339         help
 340           Watchdog timer embedded into AT32AP700x devices. This will reboot
 341           your system when the timeout is reached.
 342
 343 # BLACKFIN Architecture
 344
 345 config BFIN_WDT
 346         tristate "Blackfin On-Chip Watchdog Timer"
 347         depends on BLACKFIN
 348         ---help---
 349           If you say yes here you will get support for the Blackfin On-Chip
 350           Watchdog Timer. If you have one of these processors and wish to
 351           have watchdog support enabled, say Y, otherwise say N.
 352
 353           To compile this driver as a module, choose M here: the
 354           module will be called bfin_wdt.
 355
 356 # CRIS Architecture
 357
 358 # FRV Architecture
 359
 360 # H8300 Architecture
 361
 362 # X86 (i386 + ia64 + x86_64) Architecture
 363
 364 config ACQUIRE_WDT
 365         tristate "Acquire SBC Watchdog Timer"
 366         depends on X86
 367         ---help---
 368           This is the driver for the hardware watchdog on Single Board
 369           Computers produced by Acquire Inc (and others). This watchdog
 370           simply watches your kernel to make sure it doesn't freeze, and if
 371           it does, it reboots your computer after a certain amount of time.
 372
 373           To compile this driver as a module, choose M here: the
 374           module will be called acquirewdt.
 375
 376           Most people will say N.
 377
 378 config ADVANTECH_WDT
 379         tristate "Advantech SBC Watchdog Timer"
 380         depends on X86
 381         help
 382           If you are configuring a Linux kernel for the Advantech single-board
 383           computer, say `Y' here to support its built-in watchdog timer
 384           feature. More information can be found at
 385           <http://www.advantech.com.tw/products/>
 386
 387 config ALIM1535_WDT
 388         tristate "ALi M1535 PMU Watchdog Timer"
 389         depends on X86 && PCI
 390         ---help---
 391           This is the driver for the hardware watchdog on the ALi M1535 PMU.
 392
 393           To compile this driver as a module, choose M here: the
 394           module will be called alim1535_wdt.
 395
 396           Most people will say N.
 397
 398 config ALIM7101_WDT
 399         tristate "ALi M7101 PMU Computer Watchdog"
 400         depends on PCI
 401         help
 402           This is the driver for the hardware watchdog on the ALi M7101 PMU
 403           as used in the x86 Cobalt servers and also found in some
 404           SPARC Netra servers too.
 405
 406           To compile this driver as a module, choose M here: the
 407           module will be called alim7101_wdt.
 408
 409           Most people will say N.
 410
 411 config F71808E_WDT
 412         tristate "Fintek F71808E, F71882FG and F71889FG Watchdog"
 413         depends on X86 && EXPERIMENTAL
 414         help
 415           This is the driver for the hardware watchdog on the Fintek
 416           F71808E, F71882FG and F71889FG Super I/O controllers.
 417
 418           You can compile this driver directly into the kernel, or use
 419           it as a module.  The module will be called f71808e_wdt.
 420
 421
 422 config GEODE_WDT
 423         tristate "AMD Geode CS5535/CS5536 Watchdog"
 424         depends on CS5535_MFGPT
 425         help
 426           This driver enables a watchdog capability built into the
 427           CS5535/CS5536 companion chips for the AMD Geode GX and LX
 428           processors.  This watchdog watches your kernel to make sure
 429           it doesn't freeze, and if it does, it reboots your computer after
 430           a certain amount of time.
 431
 432           You can compile this driver directly into the kernel, or use
 433           it as a module.  The module will be called geodewdt.
 434
 435 config SC520_WDT
 436         tristate "AMD Elan SC520 processor Watchdog"
 437         depends on X86
 438         help
 439           This is the driver for the hardware watchdog built in to the
 440           AMD "Elan" SC520 microcomputer commonly used in embedded systems.
 441           This watchdog simply watches your kernel to make sure it doesn't
 442           freeze, and if it does, it reboots your computer after a certain
 443           amount of time.
 444
 445           You can compile this driver directly into the kernel, or use
 446           it as a module.  The module will be called sc520_wdt.
 447
 448 config SBC_FITPC2_WATCHDOG
 449         tristate "Compulab SBC-FITPC2 watchdog"
 450         depends on X86
 451         ---help---
 452           This is the driver for the built-in watchdog timer on the fit-PC2,
 453           fit-PC2i, CM-iAM single-board computers made by Compulab.
 454
 455           It`s possible to enable watchdog timer either from BIOS (F2) or from booted Linux.
 456           When "Watchdog Timer Value" enabled one can set 31-255 s operational range.
 457
 458           Entering BIOS setup temporary disables watchdog operation regardless to current state,
 459           so system will not be restarted while user in BIOS setup.
 460
 461           Once watchdog was enabled the system will be restarted every
 462           "Watchdog Timer Value" period, so to prevent it user can restart or
 463           disable the watchdog.
 464
 465           To compile this driver as a module, choose M here: the
 466           module will be called sbc_fitpc2_wdt.
 467
 468           Most people will say N.
 469
 470 config EUROTECH_WDT
 471         tristate "Eurotech CPU-1220/1410 Watchdog Timer"
 472         depends on X86
 473         help
 474           Enable support for the watchdog timer on the Eurotech CPU-1220 and
 475           CPU-1410 cards.  These are PC/104 SBCs. Spec sheets and product
 476           information are at <http://www.eurotech.it/>.
 477
 478 config IB700_WDT
 479         tristate "IB700 SBC Watchdog Timer"
 480         depends on X86
 481         ---help---
 482           This is the driver for the hardware watchdog on the IB700 Single
 483           Board Computer produced by TMC Technology (www.tmc-uk.com). This watchdog
 484           simply watches your kernel to make sure it doesn't freeze, and if
 485           it does, it reboots your computer after a certain amount of time.
 486
 487           This driver is like the WDT501 driver but for slightly different hardware.
 488
 489           To compile this driver as a module, choose M here: the
 490           module will be called ib700wdt.
 491
 492           Most people will say N.
 493
 494 config IBMASR
 495         tristate "IBM Automatic Server Restart"
 496         depends on X86
 497         help
 498           This is the driver for the IBM Automatic Server Restart watchdog
 499           timer built-in into some eServer xSeries machines.
 500
 501           To compile this driver as a module, choose M here: the
 502           module will be called ibmasr.
 503
 504 config WAFER_WDT
 505         tristate "ICP Single Board Computer Watchdog Timer"
 506         depends on X86
 507         help
 508           This is a driver for the hardware watchdog on the ICP Single
 509           Board Computer. This driver is working on (at least) the following
 510           IPC SBC's: Wafer 5823, Rocky 4783, Rocky 3703 and Rocky 3782.
 511
 512           To compile this driver as a module, choose M here: the
 513           module will be called wafer5823wdt.
 514
 515 config I6300ESB_WDT
 516         tristate "Intel 6300ESB Timer/Watchdog"
 517         depends on X86 && PCI
 518         ---help---
 519           Hardware driver for the watchdog timer built into the Intel
 520           6300ESB controller hub.
 521
 522           To compile this driver as a module, choose M here: the
 523           module will be called i6300esb.
 524
 525 config ITCO_WDT
 526         tristate "Intel TCO Timer/Watchdog"
 527         depends on (X86 || IA64) && PCI
 528         ---help---
 529           Hardware driver for the intel TCO timer based watchdog devices.
 530           These drivers are included in the Intel 82801 I/O Controller
 531           Hub family (from ICH0 up to ICH10) and in the Intel 63xxESB
 532           controller hub.
 533
 534           The TCO (Total Cost of Ownership) timer is a watchdog timer
 535           that will reboot the machine after its second expiration. The
 536           expiration time can be configured with the "heartbeat" parameter.
 537
 538           On some motherboards the driver may fail to reset the chipset's
 539           NO_REBOOT flag which prevents the watchdog from rebooting the
 540           machine. If this is the case you will get a kernel message like
 541           "failed to reset NO_REBOOT flag, reboot disabled by hardware".
 542
 543           To compile this driver as a module, choose M here: the
 544           module will be called iTCO_wdt.
 545
 546 config ITCO_VENDOR_SUPPORT
 547         bool "Intel TCO Timer/Watchdog Specific Vendor Support"
 548         depends on ITCO_WDT
 549         ---help---
 550           Add vendor specific support to the intel TCO timer based watchdog
 551           devices. At this moment we only have additional support for some
 552           SuperMicro Inc. motherboards.
 553
 554 config IT8712F_WDT
 555         tristate "IT8712F (Smart Guardian) Watchdog Timer"
 556         depends on X86
 557         ---help---
 558           This is the driver for the built-in watchdog timer on the IT8712F
 559           Super I/0 chipset used on many motherboards.
 560
 561           If the driver does not work, then make sure that the game port in
 562           the BIOS is enabled.
 563
 564           To compile this driver as a module, choose M here: the
 565           module will be called it8712f_wdt.
 566
 567 config IT87_WDT
 568         tristate "IT87 Watchdog Timer"
 569         depends on X86 && EXPERIMENTAL
 570         ---help---
 571           This is the driver for the hardware watchdog on the ITE IT8702,
 572           IT8712, IT8716, IT8718, IT8720, IT8726, IT8712 Super I/O chips.
 573           This watchdog simply watches your kernel to make sure it doesn't
 574           freeze, and if it does, it reboots your computer after a certain
 575           amount of time.
 576
 577           To compile this driver as a module, choose M here: the module will
 578           be called it87_wdt.
 579
 580 config HP_WATCHDOG
 581         tristate "HP Proliant iLO2+ Hardware Watchdog Timer"
 582         depends on X86
 583         help
 584           A software monitoring watchdog and NMI sourcing driver. This driver
 585           will detect lockups and provide a stack trace. This is a driver that
 586           will only load on a HP ProLiant system with a minimum of iLO2 support.
 587           To compile this driver as a module, choose M here: the module will be
 588           called hpwdt.
 589
 590 config HPWDT_NMI_DECODING
 591         bool "NMI decoding support for the HP ProLiant iLO2+ Hardware Watchdog Timer"
 592         depends on HP_WATCHDOG
 593         help
 594           When an NMI occurs this feature will make the necessary BIOS calls to
 595           log the cause of the NMI.
 596
 597 config SC1200_WDT
 598         tristate "National Semiconductor PC87307/PC97307 (ala SC1200) Watchdog"
 599         depends on X86
 600         help
 601           This is a driver for National Semiconductor PC87307/PC97307 hardware
 602           watchdog cards as found on the SC1200. This watchdog is mainly used
 603           for power management purposes and can be used to power down the device
 604           during inactivity periods (includes interrupt activity monitoring).
 605
 606           To compile this driver as a module, choose M here: the
 607           module will be called sc1200wdt.
 608
 609           Most people will say N.
 610
 611 config SCx200_WDT
 612         tristate "National Semiconductor SCx200 Watchdog"
 613         depends on SCx200 && PCI
 614         help
 615           Enable the built-in watchdog timer support on the National
 616           Semiconductor SCx200 processors.
 617
 618           If compiled as a module, it will be called scx200_wdt.
 619
 620 config PC87413_WDT
 621         tristate "NS PC87413 watchdog"
 622         depends on X86
 623         ---help---
 624           This is the driver for the hardware watchdog on the PC87413 chipset
 625           This watchdog simply watches your kernel to make sure it doesn't
 626           freeze, and if it does, it reboots your computer after a certain
 627           amount of time.
 628
 629           To compile this driver as a module, choose M here: the
 630           module will be called pc87413_wdt.
 631
 632           Most people will say N.
 633
 634 config RDC321X_WDT
 635         tristate "RDC R-321x SoC watchdog"
 636         depends on X86_RDC321X
 637         help
 638           This is the driver for the built in hardware watchdog
 639           in the RDC R-321x SoC.
 640
 641           To compile this driver as a module, choose M here: the
 642           module will be called rdc321x_wdt.
 643
 644 config 60XX_WDT
 645         tristate "SBC-60XX Watchdog Timer"
 646         depends on X86
 647         help
 648           This driver can be used with the watchdog timer found on some
 649           single board computers, namely the 6010 PII based computer.
 650           It may well work with other cards.  It reads port 0x443 to enable
 651           and re-set the watchdog timer, and reads port 0x45 to disable
 652           the watchdog.  If you have a card that behave in similar ways,
 653           you can probably make this driver work with your card as well.
 654
 655           You can compile this driver directly into the kernel, or use
 656           it as a module.  The module will be called sbc60xxwdt.
 657
 658 config SBC8360_WDT
 659         tristate "SBC8360 Watchdog Timer"
 660         depends on X86
 661         ---help---
 662
 663           This is the driver for the hardware watchdog on the SBC8360 Single
 664           Board Computer produced by Axiomtek Co., Ltd. (www.axiomtek.com).
 665
 666           To compile this driver as a module, choose M here: the
 667           module will be called sbc8360.
 668
 669           Most people will say N.
 670
 671 config SBC7240_WDT
 672         tristate "SBC Nano 7240 Watchdog Timer"
 673         depends on X86_32
 674         ---help---
 675           This is the driver for the hardware watchdog found on the IEI
 676           single board computers EPIC Nano 7240 (and likely others). This
 677           watchdog simply watches your kernel to make sure it doesn't freeze,
 678           and if it does, it reboots your computer after a certain amount of
 679           time.
 680
 681           To compile this driver as a module, choose M here: the
 682           module will be called sbc7240_wdt.
 683
 684 config CPU5_WDT
 685         tristate "SMA CPU5 Watchdog"
 686         depends on X86
 687         ---help---
 688           TBD.
 689           To compile this driver as a module, choose M here: the
 690           module will be called cpu5wdt.
 691
 692 config SMSC_SCH311X_WDT
 693         tristate "SMSC SCH311X Watchdog Timer"
 694         depends on X86
 695         ---help---
 696           This is the driver for the hardware watchdog timer on the
 697           SMSC SCH3112, SCH3114 and SCH3116 Super IO chipset
 698           (LPC IO with 8042 KBC, Reset Generation, HWM and multiple
 699           serial ports).
 700
 701           To compile this driver as a module, choose M here: the
 702           module will be called sch311x_wdt.
 703
 704 config SMSC37B787_WDT
 705         tristate "Winbond SMsC37B787 Watchdog Timer"
 706         depends on X86
 707         ---help---
 708           This is the driver for the hardware watchdog component on the
 709           Winbond SMsC37B787 chipset as used on the NetRunner Mainboard
 710           from Vision Systems and maybe others.
 711
 712           This watchdog simply watches your kernel to make sure it doesn't
 713           freeze, and if it does, it reboots your computer after a certain
 714           amount of time.
 715
 716           Usually a userspace daemon will notify the kernel WDT driver that
 717           userspace is still alive, at regular intervals.
 718
 719           To compile this driver as a module, choose M here: the
 720           module will be called smsc37b787_wdt.
 721
 722           Most people will say N.
 723
 724 config W83627HF_WDT
 725         tristate "W83627HF Watchdog Timer"
 726         depends on X86
 727         ---help---
 728           This is the driver for the hardware watchdog on the W83627HF chipset
 729           as used in Advantech PC-9578 and Tyan S2721-533 motherboards
 730           (and likely others).  This watchdog simply watches your kernel to
 731           make sure it doesn't freeze, and if it does, it reboots your computer
 732           after a certain amount of time.
 733
 734           To compile this driver as a module, choose M here: the
 735           module will be called w83627hf_wdt.
 736
 737           Most people will say N.
 738
 739 config W83697HF_WDT
 740         tristate "W83697HF/W83697HG Watchdog Timer"
 741         depends on X86
 742         ---help---
 743           This is the driver for the hardware watchdog on the W83697HF/HG
 744           chipset as used in Dedibox/VIA motherboards (and likely others).
 745           This watchdog simply watches your kernel to make sure it doesn't
 746           freeze, and if it does, it reboots your computer after a certain
 747           amount of time.
 748
 749           To compile this driver as a module, choose M here: the
 750           module will be called w83697hf_wdt.
 751
 752           Most people will say N.
 753
 754 config W83697UG_WDT
 755         tristate "W83697UG/W83697UF Watchdog Timer"
 756         depends on X86
 757         ---help---
 758           This is the driver for the hardware watchdog on the W83697UG/UF
 759           chipset as used in MSI Fuzzy CX700 VIA motherboards (and likely others).
 760           This watchdog simply watches your kernel to make sure it doesn't
 761           freeze, and if it does, it reboots your computer after a certain
 762           amount of time.
 763
 764           To compile this driver as a module, choose M here: the
 765           module will be called w83697ug_wdt.
 766
 767           Most people will say N.
 768
 769 config W83877F_WDT
 770         tristate "W83877F (EMACS) Watchdog Timer"
 771         depends on X86
 772         ---help---
 773           This is the driver for the hardware watchdog on the W83877F chipset
 774           as used in EMACS PC-104 motherboards (and likely others).  This
 775           watchdog simply watches your kernel to make sure it doesn't freeze,
 776           and if it does, it reboots your computer after a certain amount of
 777           time.
 778
 779           To compile this driver as a module, choose M here: the
 780           module will be called w83877f_wdt.
 781
 782           Most people will say N.
 783
 784 config W83977F_WDT
 785         tristate "W83977F (PCM-5335) Watchdog Timer"
 786         depends on X86
 787         ---help---
 788           This is the driver for the hardware watchdog on the W83977F I/O chip
 789           as used in AAEON's PCM-5335 SBC (and likely others).  This
 790           watchdog simply watches your kernel to make sure it doesn't freeze,
 791           and if it does, it reboots your computer after a certain amount of
 792           time.
 793
 794           To compile this driver as a module, choose M here: the
 795           module will be called w83977f_wdt.
 796
 797 config MACHZ_WDT
 798         tristate "ZF MachZ Watchdog"
 799         depends on X86
 800         ---help---
 801           If you are using a ZF Micro MachZ processor, say Y here, otherwise
 802           N.  This is the driver for the watchdog timer built-in on that
 803           processor using ZF-Logic interface.  This watchdog simply watches
 804           your kernel to make sure it doesn't freeze, and if it does, it
 805           reboots your computer after a certain amount of time.
 806
 807           To compile this driver as a module, choose M here: the
 808           module will be called machzwd.
 809
 810 config SBC_EPX_C3_WATCHDOG
 811         tristate "Winsystems SBC EPX-C3 watchdog"
 812         depends on X86
 813         ---help---
 814           This is the driver for the built-in watchdog timer on the EPX-C3
 815           Single-board computer made by Winsystems, Inc.
 816
 817           *Note*: This hardware watchdog is not probeable and thus there
 818           is no way to know if writing to its IO address will corrupt
 819           your system or have any real effect.  The only way to be sure
 820           that this driver does what you want is to make sure you
 821           are running it on an EPX-C3 from Winsystems with the watchdog
 822           timer at IO address 0x1ee and 0x1ef.  It will write to both those
 823           IO ports.  Basically, the assumption is made that if you compile
 824           this driver into your kernel and/or load it as a module, that you
 825           know what you are doing and that you are in fact running on an
 826           EPX-C3 board!
 827
 828           To compile this driver as a module, choose M here: the
 829           module will be called sbc_epx_c3.
 830
 831 # M32R Architecture
 832
 833 # M68K Architecture
 834
 835 # M68KNOMMU Architecture
 836
 837 # MIPS Architecture
 838
 839 config BCM47XX_WDT
 840         tristate "Broadcom BCM47xx Watchdog Timer"
 841         depends on BCM47XX
 842         help
 843           Hardware driver for the Broadcom BCM47xx Watchog Timer.
 844
 845 config RC32434_WDT
 846         tristate "IDT RC32434 SoC Watchdog Timer"
 847         depends on MIKROTIK_RB532
 848         help
 849           Hardware driver for the IDT RC32434 SoC built-in
 850           watchdog timer.
 851
 852           To compile this driver as a module, choose M here: the
 853           module will be called rc32434_wdt.
 854
 855 config INDYDOG
 856         tristate "Indy/I2 Hardware Watchdog"
 857         depends on SGI_HAS_INDYDOG
 858         help
 859           Hardware driver for the Indy's/I2's watchdog. This is a
 860           watchdog timer that will reboot the machine after a 60 second
 861           timer expired and no process has written to /dev/watchdog during
 862           that time.
 863
 864 config WDT_MTX1
 865         tristate "MTX-1 Hardware Watchdog"
 866         depends on MIPS_MTX1
 867         help
 868           Hardware driver for the MTX-1 boards. This is a watchdog timer that
 869           will reboot the machine after a 100 seconds timer expired.
 870
 871 config PNX833X_WDT
 872         tristate "PNX833x Hardware Watchdog"
 873         depends on SOC_PNX8335
 874         help
 875           Hardware driver for the PNX833x's watchdog. This is a
 876           watchdog timer that will reboot the machine after a programable
 877           timer has expired and no process has written to /dev/watchdog during
 878           that time.
 879
 880 config SIBYTE_WDOG
 881         tristate "Sibyte SoC hardware watchdog"
 882         depends on CPU_SB1
 883         help
 884           Watchdog driver for the built in watchdog hardware in Sibyte
 885           SoC processors.  There are apparently two watchdog timers
 886           on such processors; this driver supports only the first one,
 887           because currently Linux only supports exporting one watchdog
 888           to userspace.
 889
 890           To compile this driver as a loadable module, choose M here.
 891           The module will be called sb_wdog.
 892
 893 config AR7_WDT
 894         tristate "TI AR7 Watchdog Timer"
 895         depends on AR7
 896         help
 897           Hardware driver for the TI AR7 Watchdog Timer.
 898
 899 config TXX9_WDT
 900         tristate "Toshiba TXx9 Watchdog Timer"
 901         depends on CPU_TX39XX || CPU_TX49XX
 902         help
 903           Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs.
 904
 905 config OCTEON_WDT
 906         tristate "Cavium OCTEON SOC family Watchdog Timer"
 907         depends on CPU_CAVIUM_OCTEON
 908         default y
 909         select EXPORT_UASM if OCTEON_WDT = m
 910         help
 911           Hardware driver for OCTEON's on chip watchdog timer.
 912           Enables the watchdog for all cores running Linux. It
 913           installs a NMI handler and pokes the watchdog based on an
 914           interrupt.  On first expiration of the watchdog, the
 915           interrupt handler pokes it.  The second expiration causes an
 916           NMI that prints a message. The third expiration causes a
 917           global soft reset.
 918
 919           When userspace has /dev/watchdog open, no poking is done
 920           from the first interrupt, it is then only poked when the
 921           device is written.
 922
 923 config BCM63XX_WDT
 924         tristate "Broadcom BCM63xx hardware watchdog"
 925         depends on BCM63XX
 926         help
 927           Watchdog driver for the built in watchdog hardware in Broadcom
 928           BCM63xx SoC.
 929
 930           To compile this driver as a loadable module, choose M here.
 931           The module will be called bcm63xx_wdt.
 932
 933 # PARISC Architecture
 934
 935 # POWERPC Architecture
 936
 937 config GEF_WDT
 938         tristate "GE Watchdog Timer"
 939         depends on GEF_SBC610 || GEF_SBC310 || GEF_PPC9A
 940         ---help---
 941           Watchdog timer found in a number of GE single board computers.
 942
 943 config MPC5200_WDT
 944         bool "MPC52xx Watchdog Timer"
 945         depends on PPC_MPC52xx
 946         help
 947           Use General Purpose Timer (GPT) 0 on the MPC5200 as Watchdog.
 948
 949 config 8xxx_WDT
 950         tristate "MPC8xxx Platform Watchdog Timer"
 951         depends on PPC_8xx || PPC_83xx || PPC_86xx
 952         help
 953           This driver is for a SoC level watchdog that exists on some
 954           Freescale PowerPC processors. So far this driver supports:
 955           - MPC8xx watchdogs
 956           - MPC83xx watchdogs
 957           - MPC86xx watchdogs
 958
 959           For BookE processors (MPC85xx) use the BOOKE_WDT driver instead.
 960
 961 config MV64X60_WDT
 962         tristate "MV64X60 (Marvell Discovery) Watchdog Timer"
 963         depends on MV64X60
 964
 965 config PIKA_WDT
 966         tristate "PIKA FPGA Watchdog"
 967         depends on WARP
 968         default y
 969         help
 970           This enables the watchdog in the PIKA FPGA. Currently used on
 971           the Warp platform.
 972
 973 config BOOKE_WDT
 974         tristate "PowerPC Book-E Watchdog Timer"
 975         depends on BOOKE || 4xx
 976         ---help---
 977           Watchdog driver for PowerPC Book-E chips, such as the Freescale
 978           MPC85xx SOCs and the IBM PowerPC 440.
 979
 980           Please see Documentation/watchdog/watchdog-api.txt for
 981           more information.
 982
 983 config BOOKE_WDT_DEFAULT_TIMEOUT
 984         int "PowerPC Book-E Watchdog Timer Default Timeout"
 985         depends on BOOKE_WDT
 986         default 38 if FSL_BOOKE
 987         range 0 63 if FSL_BOOKE
 988         default 3 if !FSL_BOOKE
 989         range 0 3 if !FSL_BOOKE
 990         help
 991           Select the default watchdog timer period to be used by the PowerPC
 992           Book-E watchdog driver.  A watchdog "event" occurs when the bit
 993           position represented by this number transitions from zero to one.
 994
 995           For Freescale Book-E processors, this is a number between 0 and 63.
 996           For other Book-E processors, this is a number between 0 and 3.
 997
 998           The value can be overidden by the wdt_period command-line parameter.
 999
1000 # PPC64 Architecture
1001
1002 config WATCHDOG_RTAS
1003         tristate "RTAS watchdog"
1004         depends on PPC_RTAS
1005         help
1006           This driver adds watchdog support for the RTAS watchdog.
1007
1008           To compile this driver as a module, choose M here. The module
1009           will be called wdrtas.
1010
1011 # S390 Architecture
1012
1013 config ZVM_WATCHDOG
1014         tristate "z/VM Watchdog Timer"
1015         depends on S390
1016         help
1017           IBM s/390 and zSeries machines running under z/VM 5.1 or later
1018           provide a virtual watchdog timer to their guest that cause a
1019           user define Control Program command to be executed after a
1020           timeout.
1021
1022           To compile this driver as a module, choose M here. The module
1023           will be called vmwatchdog.
1024
1025 # SUPERH (sh + sh64) Architecture
1026
1027 config SH_WDT
1028         tristate "SuperH Watchdog"
1029         depends on SUPERH && (CPU_SH3 || CPU_SH4)
1030         help
1031           This driver adds watchdog support for the integrated watchdog in the
1032           SuperH processors. If you have one of these processors and wish
1033           to have watchdog support enabled, say Y, otherwise say N.
1034
1035           As a side note, saying Y here will automatically boost HZ to 1000
1036           so that the timer has a chance to clear the overflow counter. On
1037           slower systems (such as the SH-2 and SH-3) this will likely yield
1038           some performance issues. As such, the WDT should be avoided here
1039           unless it is absolutely necessary.
1040
1041           To compile this driver as a module, choose M here: the
1042           module will be called shwdt.
1043
1044 config SH_WDT_MMAP
1045         bool "Allow mmap of SH WDT"
1046         default n
1047         depends on SH_WDT
1048         help
1049           If you say Y here, user applications will be able to mmap the
1050           WDT/CPG registers.
1051
1052 # SPARC Architecture
1053
1054 # SPARC64 Architecture
1055
1056 config WATCHDOG_CP1XXX
1057         tristate "CP1XXX Hardware Watchdog support"
1058         depends on SPARC64 && PCI
1059         ---help---
1060           This is the driver for the hardware watchdog timers present on
1061           Sun Microsystems CompactPCI models CP1400 and CP1500.
1062
1063           To compile this driver as a module, choose M here: the
1064           module will be called cpwatchdog.
1065
1066           If you do not have a CompactPCI model CP1400 or CP1500, or
1067           another UltraSPARC-IIi-cEngine boardset with hardware watchdog,
1068           you should say N to this option.
1069
1070 config WATCHDOG_RIO
1071         tristate "RIO Hardware Watchdog support"
1072         depends on SPARC64 && PCI
1073         help
1074           Say Y here to support the hardware watchdog capability on Sun RIO
1075           machines.  The watchdog timeout period is normally one minute but
1076           can be changed with a boot-time parameter.
1077
1078 # XTENSA Architecture
1079
1080 #
1081 # ISA-based Watchdog Cards
1082 #
1083
1084 comment "ISA-based Watchdog Cards"
1085         depends on ISA
1086
1087 config PCWATCHDOG
1088         tristate "Berkshire Products ISA-PC Watchdog"
1089         depends on ISA
1090         ---help---
1091           This is the driver for the Berkshire Products ISA-PC Watchdog card.
1092           This card simply watches your kernel to make sure it doesn't freeze,
1093           and if it does, it reboots your computer after a certain amount of
1094           time. This driver is like the WDT501 driver but for different
1095           hardware. Please read <file:Documentation/watchdog/pcwd-watchdog.txt>. The PC
1096           watchdog cards can be ordered from <http://www.berkprod.com/>.
1097
1098           To compile this driver as a module, choose M here: the
1099           module will be called pcwd.
1100
1101           Most people will say N.
1102
1103 config MIXCOMWD
1104         tristate "Mixcom Watchdog"
1105         depends on ISA
1106         ---help---
1107           This is a driver for the Mixcom hardware watchdog cards.  This
1108           watchdog simply watches your kernel to make sure it doesn't freeze,
1109           and if it does, it reboots your computer after a certain amount of
1110           time.
1111
1112           To compile this driver as a module, choose M here: the
1113           module will be called mixcomwd.
1114
1115           Most people will say N.
1116
1117 config WDT
1118         tristate "WDT Watchdog timer"
1119         depends on ISA
1120         ---help---
1121           If you have a WDT500P or WDT501P watchdog board, say Y here,
1122           otherwise N. It is not possible to probe for this board, which means
1123           that you have to inform the kernel about the IO port and IRQ that
1124           is needed (you can do this via the io and irq parameters)
1125
1126           To compile this driver as a module, choose M here: the
1127           module will be called wdt.
1128
1129 #
1130 # PCI-based Watchdog Cards
1131 #
1132
1133 comment "PCI-based Watchdog Cards"
1134         depends on PCI
1135
1136 config PCIPCWATCHDOG
1137         tristate "Berkshire Products PCI-PC Watchdog"
1138         depends on PCI
1139         ---help---
1140           This is the driver for the Berkshire Products PCI-PC Watchdog card.
1141           This card simply watches your kernel to make sure it doesn't freeze,
1142           and if it does, it reboots your computer after a certain amount of
1143           time. The card can also monitor the internal temperature of the PC.
1144           More info is available at <http://www.berkprod.com/pci_pc_watchdog.htm>.
1145
1146           To compile this driver as a module, choose M here: the
1147           module will be called pcwd_pci.
1148
1149           Most people will say N.
1150
1151 config WDTPCI
1152         tristate "PCI-WDT500/501 Watchdog timer"
1153         depends on PCI
1154         ---help---
1155           If you have a PCI-WDT500/501 watchdog board, say Y here, otherwise N.
1156
1157           If you have a PCI-WDT501 watchdog board then you can enable the
1158           temperature sensor by setting the type parameter to 501.
1159
1160           If you want to enable the Fan Tachometer on the PCI-WDT501, then you
1161           can do this via the tachometer parameter. Only do this if you have a
1162           fan tachometer actually set up.
1163
1164           To compile this driver as a module, choose M here: the
1165           module will be called wdt_pci.
1166
1167 #
1168 # USB-based Watchdog Cards
1169 #
1170
1171 comment "USB-based Watchdog Cards"
1172         depends on USB
1173
1174 config USBPCWATCHDOG
1175         tristate "Berkshire Products USB-PC Watchdog"
1176         depends on USB
1177         ---help---
1178           This is the driver for the Berkshire Products USB-PC Watchdog card.
1179           This card simply watches your kernel to make sure it doesn't freeze,
1180           and if it does, it reboots your computer after a certain amount of
1181           time. The card can also monitor the internal temperature of the PC.
1182           More info is available at <http://www.berkprod.com/usb_pc_watchdog.htm>.
1183
1184           To compile this driver as a module, choose M here: the
1185           module will be called pcwd_usb.
1186
1187           Most people will say N.
1188
1189 endif # WATCHDOG