drivers/watchdog/Kconfig

   1 #
   2 # Watchdog device configuration
   3 #
   4
   5 menuconfig WATCHDOG
   6         bool "Watchdog Timer Support"
   7         ---help---
   8           If you say Y here (and to one of the following options) and create a
   9           character special file /dev/watchdog with major number 10 and minor
  10           number 130 using mknod ("man mknod"), you will get a watchdog, i.e.:
  11           subsequently opening the file and then failing to write to it for
  12           longer than 1 minute will result in rebooting the machine. This
  13           could be useful for a networked machine that needs to come back
  14           on-line as fast as possible after a lock-up. There's both a watchdog
  15           implementation entirely in software (which can sometimes fail to
  16           reboot the machine) and a driver for hardware watchdog boards, which
  17           are more robust and can also keep track of the temperature inside
  18           your computer. For details, read
  19           <file:Documentation/watchdog/watchdog-api.txt> in the kernel source.
  20
  21           The watchdog is usually used together with the watchdog daemon
  22           which is available from
  23           <ftp://ibiblio.org/pub/Linux/system/daemons/watchdog/>. This daemon can
  24           also monitor NFS connections and can reboot the machine when the process
  25           table is full.
  26
  27           If unsure, say N.
  28
  29 if WATCHDOG
  30
  31 config WATCHDOG_CORE
  32         bool "WatchDog Timer Driver Core"
  33         ---help---
  34           Say Y here if you want to use the new watchdog timer driver core.
  35           This driver provides a framework for all watchdog timer drivers
  36           and gives them the /dev/watchdog interface (and later also the
  37           sysfs interface).
  38
  39 config WATCHDOG_NOWAYOUT
  40         bool "Disable watchdog shutdown on close"
  41         help
  42           The default watchdog behaviour (which you get if you say N here) is
  43           to stop the timer if the process managing it closes the file
  44           /dev/watchdog. It's always remotely possible that this process might
  45           get killed. If you say Y here, the watchdog cannot be stopped once
  46           it has been started.
  47
  48 #
  49 # General Watchdog drivers
  50 #
  51
  52 comment "Watchdog Device Drivers"
  53
  54 # Architecture Independent
  55
  56 config SOFT_WATCHDOG
  57         tristate "Software watchdog"
  58         select WATCHDOG_CORE
  59         help
  60           A software monitoring watchdog. This will fail to reboot your system
  61           from some situations that the hardware watchdog will recover
  62           from. Equally it's a lot cheaper to install.
  63
  64           To compile this driver as a module, choose M here: the
  65           module will be called softdog.
  66
  67 config DA9052_WATCHDOG
  68         tristate "Dialog DA9052 Watchdog"
  69         depends on PMIC_DA9052
  70         select WATCHDOG_CORE
  71         help
  72           Support for the watchdog in the DA9052 PMIC. Watchdog trigger
  73           cause system reset.
  74
  75           Say Y here to include support for the DA9052 watchdog.
  76           Alternatively say M to compile the driver as a module,
  77           which will be called da9052_wdt.
  78
  79 config DA9055_WATCHDOG
  80         tristate "Dialog Semiconductor DA9055 Watchdog"
  81         depends on MFD_DA9055
  82         select WATCHDOG_CORE
  83         help
  84           If you say yes here you get support for watchdog on the Dialog
  85           Semiconductor DA9055 PMIC.
  86
  87           This driver can also be built as a module.  If so, the module
  88           will be called da9055_wdt.
  89
  90 config DA9063_WATCHDOG
  91         tristate "Dialog DA9063 Watchdog"
  92         depends on MFD_DA9063
  93         select WATCHDOG_CORE
  94         help
  95           Support for the watchdog in the DA9063 PMIC.
  96
  97           This driver can be built as a module. The module name is da9063_wdt.
  98
  99 config GPIO_WATCHDOG
 100         tristate "Watchdog device controlled through GPIO-line"
 101         depends on OF_GPIO
 102         select WATCHDOG_CORE
 103         help
 104           If you say yes here you get support for watchdog device
 105           controlled through GPIO-line.
 106
 107 config MENF21BMC_WATCHDOG
 108         tristate "MEN 14F021P00 BMC Watchdog"
 109         depends on MFD_MENF21BMC
 110         select WATCHDOG_CORE
 111         help
 112           Say Y here to include support for the MEN 14F021P00 BMC Watchdog.
 113
 114           This driver can also be built as a module. If so the module
 115           will be called menf21bmc_wdt.
 116
 117 config WM831X_WATCHDOG
 118         tristate "WM831x watchdog"
 119         depends on MFD_WM831X
 120         select WATCHDOG_CORE
 121         help
 122           Support for the watchdog in the WM831x AudioPlus PMICs.  When
 123           the watchdog triggers the system will be reset.
 124
 125 config WM8350_WATCHDOG
 126         tristate "WM8350 watchdog"
 127         depends on MFD_WM8350
 128         select WATCHDOG_CORE
 129         help
 130           Support for the watchdog in the WM8350 AudioPlus PMIC.  When
 131           the watchdog triggers the system will be reset.
 132
 133 config XILINX_WATCHDOG
 134         tristate "Xilinx Watchdog timer"
 135         depends on HAS_IOMEM
 136         select WATCHDOG_CORE
 137         help
 138           Watchdog driver for the xps_timebase_wdt ip core.
 139
 140           To compile this driver as a module, choose M here: the
 141           module will be called of_xilinx_wdt.
 142
 143 # ALPHA Architecture
 144
 145 # ARM Architecture
 146
 147 config ARM_SP805_WATCHDOG
 148         tristate "ARM SP805 Watchdog"
 149         depends on (ARM || ARM64) && ARM_AMBA
 150         select WATCHDOG_CORE
 151         help
 152           ARM Primecell SP805 Watchdog timer. This will reboot your system when
 153           the timeout is reached.
 154
 155 config AT91RM9200_WATCHDOG
 156         tristate "AT91RM9200 watchdog"
 157         depends on SOC_AT91RM9200 && MFD_SYSCON
 158         help
 159           Watchdog timer embedded into AT91RM9200 chips. This will reboot your
 160           system when the timeout is reached.
 161
 162 config AT91SAM9X_WATCHDOG
 163         tristate "AT91SAM9X / AT91CAP9 watchdog"
 164         depends on ARCH_AT91
 165         select WATCHDOG_CORE
 166         help
 167           Watchdog timer embedded into AT91SAM9X and AT91CAP9 chips. This will
 168           reboot your system when the timeout is reached.
 169
 170 config CADENCE_WATCHDOG
 171         tristate "Cadence Watchdog Timer"
 172         select WATCHDOG_CORE
 173         help
 174           Say Y here if you want to include support for the watchdog
 175           timer in the Xilinx Zynq.
 176
 177 config 21285_WATCHDOG
 178         tristate "DC21285 watchdog"
 179         depends on FOOTBRIDGE
 180         help
 181           The Intel Footbridge chip contains a built-in watchdog circuit. Say Y
 182           here if you wish to use this. Alternatively say M to compile the
 183           driver as a module, which will be called wdt285.
 184
 185           This driver does not work on all machines. In particular, early CATS
 186           boards have hardware problems that will cause the machine to simply
 187           lock up if the watchdog fires.
 188
 189           "If in doubt, leave it out" - say N.
 190
 191 config 977_WATCHDOG
 192         tristate "NetWinder WB83C977 watchdog"
 193         depends on FOOTBRIDGE && ARCH_NETWINDER
 194         help
 195           Say Y here to include support for the WB977 watchdog included in
 196           NetWinder machines. Alternatively say M to compile the driver as
 197           a module, which will be called wdt977.
 198
 199           Not sure? It's safe to say N.
 200
 201 config IXP4XX_WATCHDOG
 202         tristate "IXP4xx Watchdog"
 203         depends on ARCH_IXP4XX
 204         help
 205           Say Y here if to include support for the watchdog timer
 206           in the Intel IXP4xx network processors. This driver can
 207           be built as a module by choosing M. The module will
 208           be called ixp4xx_wdt.
 209
 210           Note: The internal IXP4xx watchdog does a soft CPU reset
 211           which doesn't reset any peripherals. There are circumstances
 212           where the watchdog will fail to reset the board correctly
 213           (e.g., if the boot ROM is in an unreadable state).
 214
 215           Say N if you are unsure.
 216
 217 config KS8695_WATCHDOG
 218         tristate "KS8695 watchdog"
 219         depends on ARCH_KS8695
 220         help
 221           Watchdog timer embedded into KS8695 processor. This will reboot your
 222           system when the timeout is reached.
 223
 224 config HAVE_S3C2410_WATCHDOG
 225         bool
 226         help
 227           This will include watchdog timer support for Samsung SoCs. If
 228           you want to include watchdog support for any machine, kindly
 229           select this in the respective mach-XXXX/Kconfig file.
 230
 231 config S3C2410_WATCHDOG
 232         tristate "S3C2410 Watchdog"
 233         depends on HAVE_S3C2410_WATCHDOG
 234         select WATCHDOG_CORE
 235         select MFD_SYSCON if ARCH_EXYNOS5
 236         help
 237           Watchdog timer block in the Samsung SoCs. This will reboot
 238           the system when the timer expires with the watchdog enabled.
 239
 240           The driver is limited by the speed of the system's PCLK
 241           signal, so with reasonably fast systems (PCLK around 50-66MHz)
 242           then watchdog intervals of over approximately 20seconds are
 243           unavailable.
 244
 245           The driver can be built as a module by choosing M, and will
 246           be called s3c2410_wdt
 247
 248 config SA1100_WATCHDOG
 249         tristate "SA1100/PXA2xx watchdog"
 250         depends on ARCH_SA1100 || ARCH_PXA
 251         help
 252           Watchdog timer embedded into SA11x0 and PXA2xx chips. This will
 253           reboot your system when timeout is reached.
 254
 255           NOTE: once enabled, this timer cannot be disabled.
 256
 257           To compile this driver as a module, choose M here: the
 258           module will be called sa1100_wdt.
 259
 260 config DW_WATCHDOG
 261         tristate "Synopsys DesignWare watchdog"
 262         depends on HAS_IOMEM
 263         help
 264           Say Y here if to include support for the Synopsys DesignWare
 265           watchdog timer found in many chips.
 266           To compile this driver as a module, choose M here: the
 267           module will be called dw_wdt.
 268
 269 config EP93XX_WATCHDOG
 270         tristate "EP93xx Watchdog"
 271         depends on ARCH_EP93XX
 272         select WATCHDOG_CORE
 273         help
 274           Say Y here if to include support for the watchdog timer
 275           embedded in the Cirrus Logic EP93xx family of devices.
 276
 277           To compile this driver as a module, choose M here: the
 278           module will be called ep93xx_wdt.
 279
 280 config OMAP_WATCHDOG
 281         tristate "OMAP Watchdog"
 282         depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS
 283         select WATCHDOG_CORE
 284         help
 285           Support for TI OMAP1610/OMAP1710/OMAP2420/OMAP3430/OMAP4430 watchdog.  Say 'Y'
 286           here to enable the OMAP1610/OMAP1710/OMAP2420/OMAP3430/OMAP4430 watchdog timer.
 287
 288 config PNX4008_WATCHDOG
 289         tristate "LPC32XX Watchdog"
 290         depends on ARCH_LPC32XX
 291         select WATCHDOG_CORE
 292         help
 293           Say Y here if to include support for the watchdog timer
 294           in the LPC32XX processor.
 295           This driver can be built as a module by choosing M. The module
 296           will be called pnx4008_wdt.
 297
 298           Say N if you are unsure.
 299
 300 config IOP_WATCHDOG
 301         tristate "IOP Watchdog"
 302         depends on ARCH_IOP13XX
 303         select WATCHDOG_NOWAYOUT if (ARCH_IOP32X || ARCH_IOP33X)
 304         help
 305           Say Y here if to include support for the watchdog timer
 306           in the Intel IOP3XX & IOP13XX I/O Processors.  This driver can
 307           be built as a module by choosing M. The module will
 308           be called iop_wdt.
 309
 310           Note: The IOP13XX watchdog does an Internal Bus Reset which will
 311           affect both cores and the peripherals of the IOP.  The ATU-X
 312           and/or ATUe configuration registers will remain intact, but if
 313           operating as an Root Complex and/or Central Resource, the PCI-X
 314           and/or PCIe busses will also be reset.  THIS IS A VERY BIG HAMMER.
 315
 316 config DAVINCI_WATCHDOG
 317         tristate "DaVinci watchdog"
 318         depends on ARCH_DAVINCI || ARCH_KEYSTONE
 319         select WATCHDOG_CORE
 320         help
 321           Say Y here if to include support for the watchdog timer
 322           in the DaVinci DM644x/DM646x or Keystone processors.
 323           To compile this driver as a module, choose M here: the
 324           module will be called davinci_wdt.
 325
 326           NOTE: once enabled, this timer cannot be disabled.
 327           Say N if you are unsure.
 328
 329 config ORION_WATCHDOG
 330         tristate "Orion watchdog"
 331         depends on ARCH_ORION5X || ARCH_DOVE || MACH_DOVE || ARCH_MVEBU
 332         select WATCHDOG_CORE
 333         help
 334           Say Y here if to include support for the watchdog timer
 335           in the Marvell Orion5x and Kirkwood ARM SoCs.
 336           To compile this driver as a module, choose M here: the
 337           module will be called orion_wdt.
 338
 339 config RN5T618_WATCHDOG
 340         tristate "Ricoh RN5T618 watchdog"
 341         depends on MFD_RN5T618
 342         select WATCHDOG_CORE
 343         help
 344           If you say yes here you get support for watchdog on the Ricoh
 345           RN5T618 PMIC.
 346
 347           This driver can also be built as a module.  If so, the module
 348           will be called rn5t618_wdt.
 349
 350 config SUNXI_WATCHDOG
 351         tristate "Allwinner SoCs watchdog support"
 352         depends on ARCH_SUNXI
 353         select WATCHDOG_CORE
 354         help
 355           Say Y here to include support for the watchdog timer
 356           in Allwinner SoCs.
 357           To compile this driver as a module, choose M here: the
 358           module will be called sunxi_wdt.
 359
 360 config COH901327_WATCHDOG
 361         bool "ST-Ericsson COH 901 327 watchdog"
 362         depends on ARCH_U300
 363         default y if MACH_U300
 364         select WATCHDOG_CORE
 365         help
 366           Say Y here to include Watchdog timer support for the
 367           watchdog embedded into the ST-Ericsson U300 series platforms.
 368           This watchdog is used to reset the system and thus cannot be
 369           compiled as a module.
 370
 371 config TWL4030_WATCHDOG
 372         tristate "TWL4030 Watchdog"
 373         depends on TWL4030_CORE
 374         select WATCHDOG_CORE
 375         help
 376           Support for TI TWL4030 watchdog.  Say 'Y' here to enable the
 377           watchdog timer support for TWL4030 chips.
 378
 379 config STMP3XXX_RTC_WATCHDOG
 380         tristate "Freescale STMP3XXX & i.MX23/28 watchdog"
 381         depends on RTC_DRV_STMP
 382         select WATCHDOG_CORE
 383         help
 384           Say Y here to include support for the watchdog timer inside
 385           the RTC for the STMP37XX/378X or i.MX23/28 SoC.
 386           To compile this driver as a module, choose M here: the
 387           module will be called stmp3xxx_rtc_wdt.
 388
 389 config NUC900_WATCHDOG
 390         tristate "Nuvoton NUC900 watchdog"
 391         depends on ARCH_W90X900
 392         help
 393           Say Y here if to include support for the watchdog timer
 394           for the Nuvoton NUC900 series SoCs.
 395           To compile this driver as a module, choose M here: the
 396           module will be called nuc900_wdt.
 397
 398 config TS72XX_WATCHDOG
 399         tristate "TS-72XX SBC Watchdog"
 400         depends on MACH_TS72XX
 401         help
 402           Technologic Systems TS-7200, TS-7250 and TS-7260 boards have
 403           watchdog timer implemented in a external CPLD chip. Say Y here
 404           if you want to support for the watchdog timer on TS-72XX boards.
 405
 406           To compile this driver as a module, choose M here: the
 407           module will be called ts72xx_wdt.
 408
 409 config MAX63XX_WATCHDOG
 410         tristate "Max63xx watchdog"
 411         depends on ARM && HAS_IOMEM
 412         select WATCHDOG_CORE
 413         help
 414           Support for memory mapped max63{69,70,71,72,73,74} watchdog timer.
 415
 416 config IMX2_WDT
 417         tristate "IMX2+ Watchdog"
 418         depends on ARCH_MXC
 419         select REGMAP_MMIO
 420         select WATCHDOG_CORE
 421         help
 422           This is the driver for the hardware watchdog
 423           on the Freescale IMX2 and later processors.
 424           If you have one of these processors and wish to have
 425           watchdog support enabled, say Y, otherwise say N.
 426
 427           To compile this driver as a module, choose M here: the
 428           module will be called imx2_wdt.
 429
 430 config UX500_WATCHDOG
 431         tristate "ST-Ericsson Ux500 watchdog"
 432         depends on MFD_DB8500_PRCMU
 433         select WATCHDOG_CORE
 434         default y
 435         help
 436           Say Y here to include Watchdog timer support for the watchdog
 437           existing in the prcmu of ST-Ericsson Ux500 series platforms.
 438
 439           To compile this driver as a module, choose M here: the
 440           module will be called ux500_wdt.
 441
 442 config RETU_WATCHDOG
 443         tristate "Retu watchdog"
 444         depends on MFD_RETU
 445         select WATCHDOG_CORE
 446         help
 447           Retu watchdog driver for Nokia Internet Tablets (770, N800,
 448           N810). At least on N800 the watchdog cannot be disabled, so
 449           this driver is essential and you should enable it.
 450
 451           To compile this driver as a module, choose M here: the
 452           module will be called retu_wdt.
 453
 454 config MOXART_WDT
 455         tristate "MOXART watchdog"
 456         depends on ARCH_MOXART
 457         help
 458           Say Y here to include Watchdog timer support for the watchdog
 459           existing on the MOXA ART SoC series platforms.
 460
 461           To compile this driver as a module, choose M here: the
 462           module will be called moxart_wdt.
 463
 464 config SIRFSOC_WATCHDOG
 465         tristate "SiRFSOC watchdog"
 466         depends on ARCH_SIRF
 467         select WATCHDOG_CORE
 468         default y
 469         help
 470           Support for CSR SiRFprimaII and SiRFatlasVI watchdog. When
 471           the watchdog triggers the system will be reset.
 472
 473 config TEGRA_WATCHDOG
 474         tristate "Tegra watchdog"
 475         depends on (ARCH_TEGRA || COMPILE_TEST) && HAS_IOMEM
 476         select WATCHDOG_CORE
 477         help
 478           Say Y here to include support for the watchdog timer
 479           embedded in NVIDIA Tegra SoCs.
 480
 481           To compile this driver as a module, choose M here: the
 482           module will be called tegra_wdt.
 483
 484 config QCOM_WDT
 485         tristate "QCOM watchdog"
 486         depends on HAS_IOMEM
 487         depends on ARCH_QCOM
 488         select WATCHDOG_CORE
 489         help
 490           Say Y here to include Watchdog timer support for the watchdog found
 491           on QCOM chipsets.  Currently supported targets are the MSM8960,
 492           APQ8064, and IPQ8064.
 493
 494           To compile this driver as a module, choose M here: the
 495           module will be called qcom_wdt.
 496
 497 config MESON_WATCHDOG
 498         tristate "Amlogic Meson SoCs watchdog support"
 499         depends on ARCH_MESON
 500         select WATCHDOG_CORE
 501         help
 502           Say Y here to include support for the watchdog timer
 503           in Amlogic Meson SoCs.
 504           To compile this driver as a module, choose M here: the
 505           module will be called meson_wdt.
 506
 507 config MEDIATEK_WATCHDOG
 508         tristate "Mediatek SoCs watchdog support"
 509         depends on ARCH_MEDIATEK
 510         select WATCHDOG_CORE
 511         help
 512           Say Y here to include support for the watchdog timer
 513           in Mediatek SoCs.
 514           To compile this driver as a module, choose M here: the
 515           module will be called mtk_wdt.
 516
 517 # AVR32 Architecture
 518
 519 config AT32AP700X_WDT
 520         tristate "AT32AP700x watchdog"
 521         depends on CPU_AT32AP700X
 522         help
 523           Watchdog timer embedded into AT32AP700x devices. This will reboot
 524           your system when the timeout is reached.
 525
 526 # BLACKFIN Architecture
 527
 528 config BFIN_WDT
 529         tristate "Blackfin On-Chip Watchdog Timer"
 530         depends on BLACKFIN
 531         ---help---
 532           If you say yes here you will get support for the Blackfin On-Chip
 533           Watchdog Timer. If you have one of these processors and wish to
 534           have watchdog support enabled, say Y, otherwise say N.
 535
 536           To compile this driver as a module, choose M here: the
 537           module will be called bfin_wdt.
 538
 539 # CRIS Architecture
 540
 541 # FRV Architecture
 542
 543 # X86 (i386 + ia64 + x86_64) Architecture
 544
 545 config ACQUIRE_WDT
 546         tristate "Acquire SBC Watchdog Timer"
 547         depends on X86
 548         ---help---
 549           This is the driver for the hardware watchdog on Single Board
 550           Computers produced by Acquire Inc (and others). This watchdog
 551           simply watches your kernel to make sure it doesn't freeze, and if
 552           it does, it reboots your computer after a certain amount of time.
 553
 554           To compile this driver as a module, choose M here: the
 555           module will be called acquirewdt.
 556
 557           Most people will say N.
 558
 559 config ADVANTECH_WDT
 560         tristate "Advantech SBC Watchdog Timer"
 561         depends on X86
 562         help
 563           If you are configuring a Linux kernel for the Advantech single-board
 564           computer, say `Y' here to support its built-in watchdog timer
 565           feature. More information can be found at
 566           <http://www.advantech.com.tw/products/>
 567
 568 config ALIM1535_WDT
 569         tristate "ALi M1535 PMU Watchdog Timer"
 570         depends on X86 && PCI
 571         ---help---
 572           This is the driver for the hardware watchdog on the ALi M1535 PMU.
 573
 574           To compile this driver as a module, choose M here: the
 575           module will be called alim1535_wdt.
 576
 577           Most people will say N.
 578
 579 config ALIM7101_WDT
 580         tristate "ALi M7101 PMU Computer Watchdog"
 581         depends on PCI
 582         help
 583           This is the driver for the hardware watchdog on the ALi M7101 PMU
 584           as used in the x86 Cobalt servers and also found in some
 585           SPARC Netra servers too.
 586
 587           To compile this driver as a module, choose M here: the
 588           module will be called alim7101_wdt.
 589
 590           Most people will say N.
 591
 592 config F71808E_WDT
 593         tristate "Fintek F71808E, F71862FG, F71869, F71882FG and F71889FG Watchdog"
 594         depends on X86
 595         help
 596           This is the driver for the hardware watchdog on the Fintek
 597           F71808E, F71862FG, F71869, F71882FG and F71889FG Super I/O controllers.
 598
 599           You can compile this driver directly into the kernel, or use
 600           it as a module.  The module will be called f71808e_wdt.
 601
 602 config SP5100_TCO
 603         tristate "AMD/ATI SP5100 TCO Timer/Watchdog"
 604         depends on X86 && PCI
 605         ---help---
 606           Hardware watchdog driver for the AMD/ATI SP5100 chipset. The TCO
 607           (Total Cost of Ownership) timer is a watchdog timer that will reboot
 608           the machine after its expiration. The expiration time can be
 609           configured with the "heartbeat" parameter.
 610
 611           To compile this driver as a module, choose M here: the
 612           module will be called sp5100_tco.
 613
 614 config GEODE_WDT
 615         tristate "AMD Geode CS5535/CS5536 Watchdog"
 616         depends on CS5535_MFGPT
 617         help
 618           This driver enables a watchdog capability built into the
 619           CS5535/CS5536 companion chips for the AMD Geode GX and LX
 620           processors.  This watchdog watches your kernel to make sure
 621           it doesn't freeze, and if it does, it reboots your computer after
 622           a certain amount of time.
 623
 624           You can compile this driver directly into the kernel, or use
 625           it as a module.  The module will be called geodewdt.
 626
 627 config SC520_WDT
 628         tristate "AMD Elan SC520 processor Watchdog"
 629         depends on MELAN
 630         help
 631           This is the driver for the hardware watchdog built in to the
 632           AMD "Elan" SC520 microcomputer commonly used in embedded systems.
 633           This watchdog simply watches your kernel to make sure it doesn't
 634           freeze, and if it does, it reboots your computer after a certain
 635           amount of time.
 636
 637           You can compile this driver directly into the kernel, or use
 638           it as a module.  The module will be called sc520_wdt.
 639
 640 config SBC_FITPC2_WATCHDOG
 641         tristate "Compulab SBC-FITPC2 watchdog"
 642         depends on X86
 643         ---help---
 644           This is the driver for the built-in watchdog timer on the fit-PC2,
 645           fit-PC2i, CM-iAM single-board computers made by Compulab.
 646
 647           It`s possible to enable watchdog timer either from BIOS (F2) or from booted Linux.
 648           When "Watchdog Timer Value" enabled one can set 31-255 s operational range.
 649
 650           Entering BIOS setup temporary disables watchdog operation regardless to current state,
 651           so system will not be restarted while user in BIOS setup.
 652
 653           Once watchdog was enabled the system will be restarted every
 654           "Watchdog Timer Value" period, so to prevent it user can restart or
 655           disable the watchdog.
 656
 657           To compile this driver as a module, choose M here: the
 658           module will be called sbc_fitpc2_wdt.
 659
 660           Most people will say N.
 661
 662 config EUROTECH_WDT
 663         tristate "Eurotech CPU-1220/1410 Watchdog Timer"
 664         depends on X86
 665         help
 666           Enable support for the watchdog timer on the Eurotech CPU-1220 and
 667           CPU-1410 cards.  These are PC/104 SBCs. Spec sheets and product
 668           information are at <http://www.eurotech.it/>.
 669
 670 config IB700_WDT
 671         tristate "IB700 SBC Watchdog Timer"
 672         depends on X86
 673         ---help---
 674           This is the driver for the hardware watchdog on the IB700 Single
 675           Board Computer produced by TMC Technology (www.tmc-uk.com). This watchdog
 676           simply watches your kernel to make sure it doesn't freeze, and if
 677           it does, it reboots your computer after a certain amount of time.
 678
 679           This driver is like the WDT501 driver but for slightly different hardware.
 680
 681           To compile this driver as a module, choose M here: the
 682           module will be called ib700wdt.
 683
 684           Most people will say N.
 685
 686 config IBMASR
 687         tristate "IBM Automatic Server Restart"
 688         depends on X86
 689         help
 690           This is the driver for the IBM Automatic Server Restart watchdog
 691           timer built-in into some eServer xSeries machines.
 692
 693           To compile this driver as a module, choose M here: the
 694           module will be called ibmasr.
 695
 696 config WAFER_WDT
 697         tristate "ICP Single Board Computer Watchdog Timer"
 698         depends on X86
 699         help
 700           This is a driver for the hardware watchdog on the ICP Single
 701           Board Computer. This driver is working on (at least) the following
 702           IPC SBC's: Wafer 5823, Rocky 4783, Rocky 3703 and Rocky 3782.
 703
 704           To compile this driver as a module, choose M here: the
 705           module will be called wafer5823wdt.
 706
 707 config I6300ESB_WDT
 708         tristate "Intel 6300ESB Timer/Watchdog"
 709         depends on PCI
 710         ---help---
 711           Hardware driver for the watchdog timer built into the Intel
 712           6300ESB controller hub.
 713
 714           To compile this driver as a module, choose M here: the
 715           module will be called i6300esb.
 716
 717 config IE6XX_WDT
 718         tristate "Intel Atom E6xx Watchdog"
 719         depends on X86 && PCI
 720         select WATCHDOG_CORE
 721         select MFD_CORE
 722         select LPC_SCH
 723         ---help---
 724           Hardware driver for the watchdog timer built into the Intel
 725           Atom E6XX (TunnelCreek) processor.
 726
 727           To compile this driver as a module, choose M here: the
 728           module will be called ie6xx_wdt.
 729
 730 config INTEL_SCU_WATCHDOG
 731         bool "Intel SCU Watchdog for Mobile Platforms"
 732         depends on X86_INTEL_MID
 733         ---help---
 734           Hardware driver for the watchdog time built into the Intel SCU
 735           for Intel Mobile Platforms.
 736
 737           To compile this driver as a module, choose M here.
 738
 739 config INTEL_MID_WATCHDOG
 740         tristate "Intel MID Watchdog Timer"
 741         depends on X86_INTEL_MID
 742         select WATCHDOG_CORE
 743         ---help---
 744           Watchdog timer driver built into the Intel SCU for Intel MID
 745           Platforms.
 746
 747           This driver currently supports only the watchdog evolution
 748           implementation in SCU, available for Merrifield generation.
 749
 750           To compile this driver as a module, choose M here.
 751
 752 config ITCO_WDT
 753         tristate "Intel TCO Timer/Watchdog"
 754         depends on (X86 || IA64) && PCI
 755         select WATCHDOG_CORE
 756         select LPC_ICH
 757         ---help---
 758           Hardware driver for the intel TCO timer based watchdog devices.
 759           These drivers are included in the Intel 82801 I/O Controller
 760           Hub family (from ICH0 up to ICH10) and in the Intel 63xxESB
 761           controller hub.
 762
 763           The TCO (Total Cost of Ownership) timer is a watchdog timer
 764           that will reboot the machine after its second expiration. The
 765           expiration time can be configured with the "heartbeat" parameter.
 766
 767           On some motherboards the driver may fail to reset the chipset's
 768           NO_REBOOT flag which prevents the watchdog from rebooting the
 769           machine. If this is the case you will get a kernel message like
 770           "failed to reset NO_REBOOT flag, reboot disabled by hardware".
 771
 772           To compile this driver as a module, choose M here: the
 773           module will be called iTCO_wdt.
 774
 775 config ITCO_VENDOR_SUPPORT
 776         bool "Intel TCO Timer/Watchdog Specific Vendor Support"
 777         depends on ITCO_WDT
 778         ---help---
 779           Add vendor specific support to the intel TCO timer based watchdog
 780           devices. At this moment we only have additional support for some
 781           SuperMicro Inc. motherboards.
 782
 783 config IT8712F_WDT
 784         tristate "IT8712F (Smart Guardian) Watchdog Timer"
 785         depends on X86
 786         ---help---
 787           This is the driver for the built-in watchdog timer on the IT8712F
 788           Super I/0 chipset used on many motherboards.
 789
 790           If the driver does not work, then make sure that the game port in
 791           the BIOS is enabled.
 792
 793           To compile this driver as a module, choose M here: the
 794           module will be called it8712f_wdt.
 795
 796 config IT87_WDT
 797         tristate "IT87 Watchdog Timer"
 798         depends on X86
 799         ---help---
 800           This is the driver for the hardware watchdog on the ITE IT8702,
 801           IT8712, IT8716, IT8718, IT8720, IT8721, IT8726 and IT8728
 802           Super I/O chips.
 803
 804           If the driver does not work, then make sure that the game port in
 805           the BIOS is enabled.
 806
 807           This watchdog simply watches your kernel to make sure it doesn't
 808           freeze, and if it does, it reboots your computer after a certain
 809           amount of time.
 810
 811           To compile this driver as a module, choose M here: the module will
 812           be called it87_wdt.
 813
 814 config HP_WATCHDOG
 815         tristate "HP ProLiant iLO2+ Hardware Watchdog Timer"
 816         depends on X86 && PCI
 817         help
 818           A software monitoring watchdog and NMI sourcing driver. This driver
 819           will detect lockups and provide a stack trace. This is a driver that
 820           will only load on an HP ProLiant system with a minimum of iLO2 support.
 821           To compile this driver as a module, choose M here: the module will be
 822           called hpwdt.
 823
 824 config KEMPLD_WDT
 825         tristate "Kontron COM Watchdog Timer"
 826         depends on MFD_KEMPLD
 827         select WATCHDOG_CORE
 828         help
 829           Support for the PLD watchdog on some Kontron ETX and COMexpress
 830           (ETXexpress) modules
 831
 832           This driver can also be built as a module. If so, the module will be
 833           called kempld_wdt.
 834
 835 config HPWDT_NMI_DECODING
 836         bool "NMI decoding support for the HP ProLiant iLO2+ Hardware Watchdog Timer"
 837         depends on HP_WATCHDOG
 838         default y
 839         help
 840           When an NMI occurs this feature will make the necessary BIOS calls to
 841           log the cause of the NMI.
 842
 843 config SC1200_WDT
 844         tristate "National Semiconductor PC87307/PC97307 (ala SC1200) Watchdog"
 845         depends on X86
 846         help
 847           This is a driver for National Semiconductor PC87307/PC97307 hardware
 848           watchdog cards as found on the SC1200. This watchdog is mainly used
 849           for power management purposes and can be used to power down the device
 850           during inactivity periods (includes interrupt activity monitoring).
 851
 852           To compile this driver as a module, choose M here: the
 853           module will be called sc1200wdt.
 854
 855           Most people will say N.
 856
 857 config SCx200_WDT
 858         tristate "National Semiconductor SCx200 Watchdog"
 859         depends on SCx200 && PCI
 860         help
 861           Enable the built-in watchdog timer support on the National
 862           Semiconductor SCx200 processors.
 863
 864           If compiled as a module, it will be called scx200_wdt.
 865
 866 config PC87413_WDT
 867         tristate "NS PC87413 watchdog"
 868         depends on X86
 869         ---help---
 870           This is the driver for the hardware watchdog on the PC87413 chipset
 871           This watchdog simply watches your kernel to make sure it doesn't
 872           freeze, and if it does, it reboots your computer after a certain
 873           amount of time.
 874
 875           To compile this driver as a module, choose M here: the
 876           module will be called pc87413_wdt.
 877
 878           Most people will say N.
 879
 880 config NV_TCO
 881         tristate "nVidia TCO Timer/Watchdog"
 882         depends on X86 && PCI
 883         ---help---
 884           Hardware driver for the TCO timer built into the nVidia Hub family
 885           (such as the MCP51).  The TCO (Total Cost of Ownership) timer is a
 886           watchdog timer that will reboot the machine after its second
 887           expiration. The expiration time can be configured with the
 888           "heartbeat" parameter.
 889
 890           On some motherboards the driver may fail to reset the chipset's
 891           NO_REBOOT flag which prevents the watchdog from rebooting the
 892           machine. If this is the case you will get a kernel message like
 893           "failed to reset NO_REBOOT flag, reboot disabled by hardware".
 894
 895           To compile this driver as a module, choose M here: the
 896           module will be called nv_tco.
 897
 898 config RDC321X_WDT
 899         tristate "RDC R-321x SoC watchdog"
 900         depends on X86_RDC321X
 901         help
 902           This is the driver for the built in hardware watchdog
 903           in the RDC R-321x SoC.
 904
 905           To compile this driver as a module, choose M here: the
 906           module will be called rdc321x_wdt.
 907
 908 config 60XX_WDT
 909         tristate "SBC-60XX Watchdog Timer"
 910         depends on X86
 911         help
 912           This driver can be used with the watchdog timer found on some
 913           single board computers, namely the 6010 PII based computer.
 914           It may well work with other cards.  It reads port 0x443 to enable
 915           and re-set the watchdog timer, and reads port 0x45 to disable
 916           the watchdog.  If you have a card that behave in similar ways,
 917           you can probably make this driver work with your card as well.
 918
 919           You can compile this driver directly into the kernel, or use
 920           it as a module.  The module will be called sbc60xxwdt.
 921
 922 config SBC8360_WDT
 923         tristate "SBC8360 Watchdog Timer"
 924         depends on X86_32
 925         ---help---
 926
 927           This is the driver for the hardware watchdog on the SBC8360 Single
 928           Board Computer produced by Axiomtek Co., Ltd. (www.axiomtek.com).
 929
 930           To compile this driver as a module, choose M here: the
 931           module will be called sbc8360.
 932
 933           Most people will say N.
 934
 935 config SBC7240_WDT
 936         tristate "SBC Nano 7240 Watchdog Timer"
 937         depends on X86_32 && !UML
 938         ---help---
 939           This is the driver for the hardware watchdog found on the IEI
 940           single board computers EPIC Nano 7240 (and likely others). This
 941           watchdog simply watches your kernel to make sure it doesn't freeze,
 942           and if it does, it reboots your computer after a certain amount of
 943           time.
 944
 945           To compile this driver as a module, choose M here: the
 946           module will be called sbc7240_wdt.
 947
 948 config CPU5_WDT
 949         tristate "SMA CPU5 Watchdog"
 950         depends on X86
 951         ---help---
 952           TBD.
 953           To compile this driver as a module, choose M here: the
 954           module will be called cpu5wdt.
 955
 956 config SMSC_SCH311X_WDT
 957         tristate "SMSC SCH311X Watchdog Timer"
 958         depends on X86
 959         ---help---
 960           This is the driver for the hardware watchdog timer on the
 961           SMSC SCH3112, SCH3114 and SCH3116 Super IO chipset
 962           (LPC IO with 8042 KBC, Reset Generation, HWM and multiple
 963           serial ports).
 964
 965           To compile this driver as a module, choose M here: the
 966           module will be called sch311x_wdt.
 967
 968 config SMSC37B787_WDT
 969         tristate "Winbond SMsC37B787 Watchdog Timer"
 970         depends on X86
 971         ---help---
 972           This is the driver for the hardware watchdog component on the
 973           Winbond SMsC37B787 chipset as used on the NetRunner Mainboard
 974           from Vision Systems and maybe others.
 975
 976           This watchdog simply watches your kernel to make sure it doesn't
 977           freeze, and if it does, it reboots your computer after a certain
 978           amount of time.
 979
 980           Usually a userspace daemon will notify the kernel WDT driver that
 981           userspace is still alive, at regular intervals.
 982
 983           To compile this driver as a module, choose M here: the
 984           module will be called smsc37b787_wdt.
 985
 986           Most people will say N.
 987
 988 config VIA_WDT
 989         tristate "VIA Watchdog Timer"
 990         depends on X86 && PCI
 991         select WATCHDOG_CORE
 992         ---help---
 993         This is the driver for the hardware watchdog timer on VIA
 994         southbridge chipset CX700, VX800/VX820 or VX855/VX875.
 995
 996         To compile this driver as a module, choose M here; the module
 997         will be called via_wdt.
 998
 999         Most people will say N.
1000
1001 config W83627HF_WDT
1002         tristate "Watchdog timer for W83627HF/W83627DHG and compatibles"
1003         depends on X86
1004         select WATCHDOG_CORE
1005         ---help---
1006           This is the driver for the hardware watchdog on the following
1007           Super I/O chips.
1008                 W83627DHG/DHG-P/EHF/EHG/F/G/HF/S/SF/THF/UHG/UG
1009                 W83637HF
1010                 W83667HG/HG-B
1011                 W83687THF
1012                 W83697HF
1013                 W83697UG
1014                 NCT6775
1015                 NCT6776
1016                 NCT6779
1017                 NCT6791
1018                 NCT6792
1019
1020           This watchdog simply watches your kernel to make sure it doesn't
1021           freeze, and if it does, it reboots your computer after a certain
1022           amount of time.
1023
1024           To compile this driver as a module, choose M here: the
1025           module will be called w83627hf_wdt.
1026
1027           Most people will say N.
1028
1029 config W83877F_WDT
1030         tristate "W83877F (EMACS) Watchdog Timer"
1031         depends on X86
1032         ---help---
1033           This is the driver for the hardware watchdog on the W83877F chipset
1034           as used in EMACS PC-104 motherboards (and likely others).  This
1035           watchdog simply watches your kernel to make sure it doesn't freeze,
1036           and if it does, it reboots your computer after a certain amount of
1037           time.
1038
1039           To compile this driver as a module, choose M here: the
1040           module will be called w83877f_wdt.
1041
1042           Most people will say N.
1043
1044 config W83977F_WDT
1045         tristate "W83977F (PCM-5335) Watchdog Timer"
1046         depends on X86
1047         ---help---
1048           This is the driver for the hardware watchdog on the W83977F I/O chip
1049           as used in AAEON's PCM-5335 SBC (and likely others).  This
1050           watchdog simply watches your kernel to make sure it doesn't freeze,
1051           and if it does, it reboots your computer after a certain amount of
1052           time.
1053
1054           To compile this driver as a module, choose M here: the
1055           module will be called w83977f_wdt.
1056
1057 config MACHZ_WDT
1058         tristate "ZF MachZ Watchdog"
1059         depends on X86
1060         ---help---
1061           If you are using a ZF Micro MachZ processor, say Y here, otherwise
1062           N.  This is the driver for the watchdog timer built-in on that
1063           processor using ZF-Logic interface.  This watchdog simply watches
1064           your kernel to make sure it doesn't freeze, and if it does, it
1065           reboots your computer after a certain amount of time.
1066
1067           To compile this driver as a module, choose M here: the
1068           module will be called machzwd.
1069
1070 config SBC_EPX_C3_WATCHDOG
1071         tristate "Winsystems SBC EPX-C3 watchdog"
1072         depends on X86
1073         ---help---
1074           This is the driver for the built-in watchdog timer on the EPX-C3
1075           Single-board computer made by Winsystems, Inc.
1076
1077           *Note*: This hardware watchdog is not probeable and thus there
1078           is no way to know if writing to its IO address will corrupt
1079           your system or have any real effect.  The only way to be sure
1080           that this driver does what you want is to make sure you
1081           are running it on an EPX-C3 from Winsystems with the watchdog
1082           timer at IO address 0x1ee and 0x1ef.  It will write to both those
1083           IO ports.  Basically, the assumption is made that if you compile
1084           this driver into your kernel and/or load it as a module, that you
1085           know what you are doing and that you are in fact running on an
1086           EPX-C3 board!
1087
1088           To compile this driver as a module, choose M here: the
1089           module will be called sbc_epx_c3.
1090
1091 # M32R Architecture
1092
1093 # M68K Architecture
1094
1095 config M54xx_WATCHDOG
1096         tristate "MCF54xx watchdog support"
1097         depends on M548x
1098         help
1099           To compile this driver as a module, choose M here: the
1100           module will be called m54xx_wdt.
1101
1102 # MicroBlaze Architecture
1103
1104 # MIPS Architecture
1105
1106 config ATH79_WDT
1107         tristate "Atheros AR71XX/AR724X/AR913X hardware watchdog"
1108         depends on ATH79
1109         help
1110           Hardware driver for the built-in watchdog timer on the Atheros
1111           AR71XX/AR724X/AR913X SoCs.
1112
1113 config BCM47XX_WDT
1114         tristate "Broadcom BCM47xx Watchdog Timer"
1115         depends on BCM47XX || ARCH_BCM_5301X
1116         select WATCHDOG_CORE
1117         help
1118           Hardware driver for the Broadcom BCM47xx Watchdog Timer.
1119
1120 config RC32434_WDT
1121         tristate "IDT RC32434 SoC Watchdog Timer"
1122         depends on MIKROTIK_RB532
1123         help
1124           Hardware driver for the IDT RC32434 SoC built-in
1125           watchdog timer.
1126
1127           To compile this driver as a module, choose M here: the
1128           module will be called rc32434_wdt.
1129
1130 config INDYDOG
1131         tristate "Indy/I2 Hardware Watchdog"
1132         depends on SGI_HAS_INDYDOG
1133         help
1134           Hardware driver for the Indy's/I2's watchdog. This is a
1135           watchdog timer that will reboot the machine after a 60 second
1136           timer expired and no process has written to /dev/watchdog during
1137           that time.
1138
1139 config JZ4740_WDT
1140         tristate "Ingenic jz4740 SoC hardware watchdog"
1141         depends on MACH_JZ4740
1142         select WATCHDOG_CORE
1143         help
1144           Hardware driver for the built-in watchdog timer on Ingenic jz4740 SoCs.
1145
1146 config WDT_MTX1
1147         tristate "MTX-1 Hardware Watchdog"
1148         depends on MIPS_MTX1
1149         help
1150           Hardware driver for the MTX-1 boards. This is a watchdog timer that
1151           will reboot the machine after a 100 seconds timer expired.
1152
1153 config PNX833X_WDT
1154         tristate "PNX833x Hardware Watchdog"
1155         depends on SOC_PNX8335
1156         help
1157           Hardware driver for the PNX833x's watchdog. This is a
1158           watchdog timer that will reboot the machine after a programmable
1159           timer has expired and no process has written to /dev/watchdog during
1160           that time.
1161
1162 config SIBYTE_WDOG
1163         tristate "Sibyte SoC hardware watchdog"
1164         depends on CPU_SB1
1165         help
1166           Watchdog driver for the built in watchdog hardware in Sibyte
1167           SoC processors.  There are apparently two watchdog timers
1168           on such processors; this driver supports only the first one,
1169           because currently Linux only supports exporting one watchdog
1170           to userspace.
1171
1172           To compile this driver as a loadable module, choose M here.
1173           The module will be called sb_wdog.
1174
1175 config AR7_WDT
1176         tristate "TI AR7 Watchdog Timer"
1177         depends on AR7
1178         help
1179           Hardware driver for the TI AR7 Watchdog Timer.
1180
1181 config TXX9_WDT
1182         tristate "Toshiba TXx9 Watchdog Timer"
1183         depends on CPU_TX39XX || CPU_TX49XX
1184         select WATCHDOG_CORE
1185         help
1186           Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs.
1187
1188 config OCTEON_WDT
1189         tristate "Cavium OCTEON SOC family Watchdog Timer"
1190         depends on CAVIUM_OCTEON_SOC
1191         default y
1192         select WATCHDOG_CORE
1193         select EXPORT_UASM if OCTEON_WDT = m
1194         help
1195           Hardware driver for OCTEON's on chip watchdog timer.
1196           Enables the watchdog for all cores running Linux. It
1197           installs a NMI handler and pokes the watchdog based on an
1198           interrupt.  On first expiration of the watchdog, the
1199           interrupt handler pokes it.  The second expiration causes an
1200           NMI that prints a message. The third expiration causes a
1201           global soft reset.
1202
1203           When userspace has /dev/watchdog open, no poking is done
1204           from the first interrupt, it is then only poked when the
1205           device is written.
1206
1207 config BCM63XX_WDT
1208         tristate "Broadcom BCM63xx hardware watchdog"
1209         depends on BCM63XX
1210         help
1211           Watchdog driver for the built in watchdog hardware in Broadcom
1212           BCM63xx SoC.
1213
1214           To compile this driver as a loadable module, choose M here.
1215           The module will be called bcm63xx_wdt.
1216
1217 config BCM2835_WDT
1218         tristate "Broadcom BCM2835 hardware watchdog"
1219         depends on ARCH_BCM2835
1220         select WATCHDOG_CORE
1221         help
1222           Watchdog driver for the built in watchdog hardware in Broadcom
1223           BCM2835 SoC.
1224
1225           To compile this driver as a loadable module, choose M here.
1226           The module will be called bcm2835_wdt.
1227
1228 config BCM_KONA_WDT
1229         tristate "BCM Kona Watchdog"
1230         depends on ARCH_BCM_MOBILE
1231         select WATCHDOG_CORE
1232         help
1233           Support for the watchdog timer on the following Broadcom BCM281xx
1234           family, which includes BCM11130, BCM11140, BCM11351, BCM28145 and
1235           BCM28155 variants.
1236
1237           Say 'Y' or 'M' here to enable the driver. The module will be called
1238           bcm_kona_wdt.
1239
1240 config BCM_KONA_WDT_DEBUG
1241         bool "DEBUGFS support for BCM Kona Watchdog"
1242         depends on BCM_KONA_WDT
1243         help
1244           If enabled, adds /sys/kernel/debug/bcm_kona_wdt/info which provides
1245           access to the driver's internal data structures as well as watchdog
1246           timer hardware registres.
1247
1248           If in doubt, say 'N'.
1249
1250 config IMGPDC_WDT
1251         tristate "Imagination Technologies PDC Watchdog Timer"
1252         depends on HAS_IOMEM
1253         depends on METAG || MIPS || COMPILE_TEST
1254         help
1255           Driver for Imagination Technologies PowerDown Controller
1256           Watchdog Timer.
1257
1258           To compile this driver as a loadable module, choose M here.
1259           The module will be called imgpdc_wdt.
1260
1261 config LANTIQ_WDT
1262         tristate "Lantiq SoC watchdog"
1263         depends on LANTIQ
1264         help
1265           Hardware driver for the Lantiq SoC Watchdog Timer.
1266
1267 config RALINK_WDT
1268         tristate "Ralink SoC watchdog"
1269         select WATCHDOG_CORE
1270         depends on RALINK
1271         help
1272           Hardware driver for the Ralink SoC Watchdog Timer.
1273
1274 # PARISC Architecture
1275
1276 # POWERPC Architecture
1277
1278 config GEF_WDT
1279         tristate "GE Watchdog Timer"
1280         depends on GE_FPGA
1281         ---help---
1282           Watchdog timer found in a number of GE single board computers.
1283
1284 config MPC5200_WDT
1285         bool "MPC52xx Watchdog Timer"
1286         depends on PPC_MPC52xx
1287         help
1288           Use General Purpose Timer (GPT) 0 on the MPC5200 as Watchdog.
1289
1290 config 8xxx_WDT
1291         tristate "MPC8xxx Platform Watchdog Timer"
1292         depends on PPC_8xx || PPC_83xx || PPC_86xx
1293         select WATCHDOG_CORE
1294         help
1295           This driver is for a SoC level watchdog that exists on some
1296           Freescale PowerPC processors. So far this driver supports:
1297           - MPC8xx watchdogs
1298           - MPC83xx watchdogs
1299           - MPC86xx watchdogs
1300
1301           For BookE processors (MPC85xx) use the BOOKE_WDT driver instead.
1302
1303 config MV64X60_WDT
1304         tristate "MV64X60 (Marvell Discovery) Watchdog Timer"
1305         depends on MV64X60
1306
1307 config PIKA_WDT
1308         tristate "PIKA FPGA Watchdog"
1309         depends on WARP
1310         default y
1311         help
1312           This enables the watchdog in the PIKA FPGA. Currently used on
1313           the Warp platform.
1314
1315 config BOOKE_WDT
1316         tristate "PowerPC Book-E Watchdog Timer"
1317         depends on BOOKE || 4xx
1318         select WATCHDOG_CORE
1319         ---help---
1320           Watchdog driver for PowerPC Book-E chips, such as the Freescale
1321           MPC85xx SOCs and the IBM PowerPC 440.
1322
1323           Please see Documentation/watchdog/watchdog-api.txt for
1324           more information.
1325
1326 config BOOKE_WDT_DEFAULT_TIMEOUT
1327         int "PowerPC Book-E Watchdog Timer Default Timeout"
1328         depends on BOOKE_WDT
1329         default 38 if PPC_FSL_BOOK3E
1330         range 0 63 if PPC_FSL_BOOK3E
1331         default 3 if !PPC_FSL_BOOK3E
1332         range 0 3 if !PPC_FSL_BOOK3E
1333         help
1334           Select the default watchdog timer period to be used by the PowerPC
1335           Book-E watchdog driver.  A watchdog "event" occurs when the bit
1336           position represented by this number transitions from zero to one.
1337
1338           For Freescale Book-E processors, this is a number between 0 and 63.
1339           For other Book-E processors, this is a number between 0 and 3.
1340
1341           The value can be overridden by the wdt_period command-line parameter.
1342
1343 config MEN_A21_WDT
1344        tristate "MEN A21 VME CPU Carrier Board Watchdog Timer"
1345        select WATCHDOG_CORE
1346        depends on GPIOLIB
1347        help
1348         Watchdog driver for MEN A21 VMEbus CPU Carrier Boards.
1349
1350         The driver can also be built as a module. If so, the module will be
1351         called mena21_wdt.
1352
1353         If unsure select N here.
1354
1355 # PPC64 Architecture
1356
1357 config WATCHDOG_RTAS
1358         tristate "RTAS watchdog"
1359         depends on PPC_RTAS
1360         help
1361           This driver adds watchdog support for the RTAS watchdog.
1362
1363           To compile this driver as a module, choose M here. The module
1364           will be called wdrtas.
1365
1366 # S390 Architecture
1367
1368 config DIAG288_WATCHDOG
1369         tristate "System z diag288 Watchdog"
1370         depends on S390
1371         select WATCHDOG_CORE
1372         help
1373           IBM s/390 and zSeries machines running under z/VM 5.1 or later
1374           provide a virtual watchdog timer to their guest that cause a
1375           user define Control Program command to be executed after a
1376           timeout.
1377           LPAR provides a very similar interface. This driver handles
1378           both.
1379
1380           To compile this driver as a module, choose M here. The module
1381           will be called diag288_wdt.
1382
1383 # SUPERH (sh + sh64) Architecture
1384
1385 config SH_WDT
1386         tristate "SuperH Watchdog"
1387         depends on SUPERH && (CPU_SH3 || CPU_SH4)
1388         select WATCHDOG_CORE
1389         help
1390           This driver adds watchdog support for the integrated watchdog in the
1391           SuperH processors. If you have one of these processors and wish
1392           to have watchdog support enabled, say Y, otherwise say N.
1393
1394           As a side note, saying Y here will automatically boost HZ to 1000
1395           so that the timer has a chance to clear the overflow counter. On
1396           slower systems (such as the SH-2 and SH-3) this will likely yield
1397           some performance issues. As such, the WDT should be avoided here
1398           unless it is absolutely necessary.
1399
1400           To compile this driver as a module, choose M here: the
1401           module will be called shwdt.
1402
1403 # SPARC Architecture
1404
1405 # SPARC64 Architecture
1406
1407 config WATCHDOG_CP1XXX
1408         tristate "CP1XXX Hardware Watchdog support"
1409         depends on SPARC64 && PCI
1410         ---help---
1411           This is the driver for the hardware watchdog timers present on
1412           Sun Microsystems CompactPCI models CP1400 and CP1500.
1413
1414           To compile this driver as a module, choose M here: the
1415           module will be called cpwatchdog.
1416
1417           If you do not have a CompactPCI model CP1400 or CP1500, or
1418           another UltraSPARC-IIi-cEngine boardset with hardware watchdog,
1419           you should say N to this option.
1420
1421 config WATCHDOG_RIO
1422         tristate "RIO Hardware Watchdog support"
1423         depends on SPARC64 && PCI
1424         help
1425           Say Y here to support the hardware watchdog capability on Sun RIO
1426           machines.  The watchdog timeout period is normally one minute but
1427           can be changed with a boot-time parameter.
1428
1429 # XTENSA Architecture
1430
1431 # Xen Architecture
1432
1433 config XEN_WDT
1434         tristate "Xen Watchdog support"
1435         depends on XEN
1436         help
1437           Say Y here to support the hypervisor watchdog capability provided
1438           by Xen 4.0 and newer.  The watchdog timeout period is normally one
1439           minute but can be changed with a boot-time parameter.
1440
1441 config UML_WATCHDOG
1442         tristate "UML watchdog"
1443         depends on UML
1444
1445 #
1446 # ISA-based Watchdog Cards
1447 #
1448
1449 comment "ISA-based Watchdog Cards"
1450         depends on ISA
1451
1452 config PCWATCHDOG
1453         tristate "Berkshire Products ISA-PC Watchdog"
1454         depends on ISA
1455         ---help---
1456           This is the driver for the Berkshire Products ISA-PC Watchdog card.
1457           This card simply watches your kernel to make sure it doesn't freeze,
1458           and if it does, it reboots your computer after a certain amount of
1459           time. This driver is like the WDT501 driver but for different
1460           hardware. Please read <file:Documentation/watchdog/pcwd-watchdog.txt>. The PC
1461           watchdog cards can be ordered from <http://www.berkprod.com/>.
1462
1463           To compile this driver as a module, choose M here: the
1464           module will be called pcwd.
1465
1466           Most people will say N.
1467
1468 config MIXCOMWD
1469         tristate "Mixcom Watchdog"
1470         depends on ISA
1471         ---help---
1472           This is a driver for the Mixcom hardware watchdog cards.  This
1473           watchdog simply watches your kernel to make sure it doesn't freeze,
1474           and if it does, it reboots your computer after a certain amount of
1475           time.
1476
1477           To compile this driver as a module, choose M here: the
1478           module will be called mixcomwd.
1479
1480           Most people will say N.
1481
1482 config WDT
1483         tristate "WDT Watchdog timer"
1484         depends on ISA
1485         ---help---
1486           If you have a WDT500P or WDT501P watchdog board, say Y here,
1487           otherwise N. It is not possible to probe for this board, which means
1488           that you have to inform the kernel about the IO port and IRQ that
1489           is needed (you can do this via the io and irq parameters)
1490
1491           To compile this driver as a module, choose M here: the
1492           module will be called wdt.
1493
1494 #
1495 # PCI-based Watchdog Cards
1496 #
1497
1498 comment "PCI-based Watchdog Cards"
1499         depends on PCI
1500
1501 config PCIPCWATCHDOG
1502         tristate "Berkshire Products PCI-PC Watchdog"
1503         depends on PCI
1504         ---help---
1505           This is the driver for the Berkshire Products PCI-PC Watchdog card.
1506           This card simply watches your kernel to make sure it doesn't freeze,
1507           and if it does, it reboots your computer after a certain amount of
1508           time. The card can also monitor the internal temperature of the PC.
1509           More info is available at <http://www.berkprod.com/pci_pc_watchdog.htm>.
1510
1511           To compile this driver as a module, choose M here: the
1512           module will be called pcwd_pci.
1513
1514           Most people will say N.
1515
1516 config WDTPCI
1517         tristate "PCI-WDT500/501 Watchdog timer"
1518         depends on PCI
1519         ---help---
1520           If you have a PCI-WDT500/501 watchdog board, say Y here, otherwise N.
1521
1522           If you have a PCI-WDT501 watchdog board then you can enable the
1523           temperature sensor by setting the type parameter to 501.
1524
1525           If you want to enable the Fan Tachometer on the PCI-WDT501, then you
1526           can do this via the tachometer parameter. Only do this if you have a
1527           fan tachometer actually set up.
1528
1529           To compile this driver as a module, choose M here: the
1530           module will be called wdt_pci.
1531
1532 #
1533 # USB-based Watchdog Cards
1534 #
1535
1536 comment "USB-based Watchdog Cards"
1537         depends on USB
1538
1539 config USBPCWATCHDOG
1540         tristate "Berkshire Products USB-PC Watchdog"
1541         depends on USB
1542         ---help---
1543           This is the driver for the Berkshire Products USB-PC Watchdog card.
1544           This card simply watches your kernel to make sure it doesn't freeze,
1545           and if it does, it reboots your computer after a certain amount of
1546           time. The card can also monitor the internal temperature of the PC.
1547           More info is available at <http://www.berkprod.com/usb_pc_watchdog.htm>.
1548
1549           To compile this driver as a module, choose M here: the
1550           module will be called pcwd_usb.
1551
1552           Most people will say N.
1553
1554 endif # WATCHDOG