1 2015-11-24 Christophe Monat <christophe.monat@st.com>
3 * config/tc-arm.c (move_or_literal_pool): Do not transform ldr
4 ri,=imm into movs when ri is a high register in T1.
6 2015-11-20 Nick Clifton <nickc@redhat.com>
8 * po/fr.po: Updated French translation.
9 * po/uk.po: Updated Ukraninan translation.
10 * po/zh_CN.po: New simplified Chinese translation.
11 * configure.ac (ALL_LINGUAS): Add zh_CN.
12 * configure: Regenerate.
14 2015-11-19 Matthew Wahab <matthew.wahab@arm.com>
16 * config/tc-arm.c (arm_archs): Add "armv8.2-a".
17 * doc/c-arm.texi (-march): Add "armv8.2-a".
19 2015-11-19 Matthew Wahab <matthew.wahab@arm.com>
21 * config/tc-aarch64.c (aarch64_archs): Add "armv8.2-a".
22 * doc/c-aarch64.texi (-march): Likewise.
24 2015-11-19 Alan Modra <amodra@gmail.com>
26 * read.c (output_big_leb128): Describe "sign" parameter.
28 2015-11-19 Alan Modra <amodra@gmail.com>
30 * config/tc-ppc.h (SUB_SEGMENT_ALIGN): Define only for ELF.
32 2015-11-16 Mike Frysinger <vapier@gentoo.org>
34 * config/tc-microblaze.c (parse_imm): Add an offsetT cast.
36 2015-11-13 Tristan Gingold <gingold@adacore.com>
38 * configure: Regenerate.
40 2015-11-13 Tristan Gingold <gingold@adacore.com>
42 * NEWS: Add marker for 2.26.
44 2015-11-12 James Greenhalgh <james.greenhalgh@arm.com>
46 * config/tc-aarch64.c (aarch64_cpus): Add cortex-a35.
47 * doc/c-aarch64.texi (-mcpu=): Likewise.
49 2015-11-12 James Greenhalgh <james.greenhalgh@arm.com>
51 * config/tc-arm.c (arm_cpus): Likewise.
52 * doc/c-arm.texi (-mcpu=): Likewise.
54 2015-11-12 Matthew Wahab <matthew.wahab@arm.com>
57 * config/tc-arm.c (move_or_literal_pool): Remove redundant feature
58 check. Fix some code formatting. Drop use of MOVT. Add some
61 2015-11-11 Alan Modra <amodra@gmail.com>
62 Peter Bergner <bergner@vnet.ibm.com>
64 * doc/as.texinfo (Target PowerPC): Document -mpower9 and -mpwr9.
65 * doc/c-ppc.texi (PowerPC-Opts): Likewise.
66 * config/tc-ppc.c (md_show_usage): Likewise.
67 (md_assemble): Handle BFD_RELOC_PPC_REL16DX_HA.
68 (md_apply_fix): Likewise.
69 (ppc_handle_align): Handle power9's group ending nop.
71 2015-11-09 Jim Wilson <jim.wilson@linaro.org>
73 * config/tc-aarch64.c (aarch64_cpus): Add qdf24xx.
74 * config/tc-arm.c (arm_cpus): Likewise.
75 * doc/c-arm.texi, doc/c-aarch64.texi: Likewise.
77 2015-11-09 Dominik Vogt <vogt@linux.vnet.ibm.com>
79 * read.c (parse_bitfield_cons): Fix left shift of negative value.
80 * config/tc-xstormy16.c (md_section_align): Likewise.
81 * config/tc-xgate.c (md_section_align): Likewise.
82 * config/tc-visium.c (md_section_align): Likewise.
83 * config/tc-v850.c (md_section_align): Likewise.
84 * config/tc-tic6x.c (md_section_align): Likewise.
85 * config/tc-sh.c (SH64PCREL32_M, SH64PCREL48_M, SH64PCREL32_M)
86 (MOVI_32_M, MOVI_48_M, MOVI_32_M, md_section_align): Likewise.
87 * config/tc-sh64.c (shmedia_md_estimate_size_before_relax): Likewise.
88 * config/tc-score.c (s3_section_align): Likewise.
89 * config/tc-score7.c (s7_section_align): Likewise.
90 * config/tc-s390.c (md_section_align): Likewise.
91 * config/tc-rx.c (md_section_align): Likewise.
92 * config/tc-rl78.c (md_section_align): Likewise.
93 * config/tc-ppc.c (md_section_align): Likewise.
94 * config/tc-or1k.c (md_section_align): Likewise.
95 * config/tc-nds32.c (md_section_align): Likewise.
96 * config/tc-mt.c (md_section_align): Likewise.
97 * config/tc-msp430.c (md_section_align): Likewise.
98 * config/tc-mn10300.c (md_section_align): Likewise.
99 * config/tc-mn10200.c (md_section_align): Likewise.
100 * config/tc-mips.c (md_section_align): Likewise.
101 * config/tc-microblaze.c (parse_imm): Likewise.
102 * config/tc-mep.c (md_section_align): Likewise.
103 * config/tc-m68k.c (md_section_align): Likewise.
104 * config/tc-m68hc11.c (md_section_align): Likewise.
105 * config/tc-m32r.c (md_section_align): Likewise.
106 * config/tc-m32c.c (md_section_align): Likewise.
107 * config/tc-lm32.c (md_section_align): Likewise.
108 * config/tc-iq2000.c (md_section_align): Likewise.
109 * config/tc-ip2k.c (md_section_align): Likewise.
110 * config/tc-ia64.c (dot_save, dot_vframe): Likewise.
111 * config/tc-i960.c (md_number_to_field, md_section_align): Likewise.
112 * config/tc-i386.c (md_section_align): Likewise.
113 * config/tc-i370.c (md_section_align): Likewise.
114 * config/tc-frv.c (md_section_align): Likewise.
115 * config/tc-fr30.c (md_section_align): Likewise.
116 * config/tc-epiphany.c (md_section_align): Likewise.
117 * config/tc-d30v.c (md_section_align): Likewise.
118 * config/tc-d10v.c (md_section_align): Likewise.
119 * config/tc-cr16.c (l_cons): Likewise.
120 * config/tc-bfin.c (md_section_align): Likewise.
121 * config/tc-arm.c (md_section_align): Likewise.
122 * config/tc-arc.c (md_section_align): Likewise.
123 * config/bfin-parse.y (expr_1): Likewise.
125 2015-11-02 Nick Clifton <nickc@redhat.com>
127 * config/rx-parse.y: Allow zero value for 5-bit displacements.
129 2015-11-02 Nick Clifton <nickc@redhat.com>
131 * config/tc-rx.c (parse_rx_section): Align parameter provides a
132 multiple of n argument, not a power of n argument.
134 2015-10-29 Nick Clifton <nickc@redhat.com>
136 * config/tc-aarch64.c (elf64_aarch64_target_format): Select the
137 cloudabi format if the TARGET_OS is cloudabi.
139 2015-10-29 Thomas Preud'homme <thomas.preudhomme@arm.com>
141 * config/tc-arm.c (insns): Guard cps by arm_ext_v6_notm instead of
144 2015-10-28 Claudiu Zissulescu <claziss@synopsys.com>
146 * config/tc-arc.c (tokenize_arguments): Avoid creating unused
147 symbols when parsing relocation types.
148 (md_apply_fix): Handle TLS relocations. Fix BFD_RELOC_ARC_32_PCREL
150 (arc_check_reloc): Emit BFD_RELOC_ARC_32_PCREL relocation.
152 2015-10-27 Jim Wilson <jim.wilson@linaro.org>
154 * config/tc-arm.c (selected_cpu_name): Increase length of array to
155 accomodate "Samsung Exynos M1".
156 (arm_parse_cpu): Add assertion and length check to prevent
157 overfilling selected_cpu_name.
159 2015-10-22 Nick Clifton <nickc@redhat.com>
161 * config/tc-msp430.c (PUSH_1X_WORKAROUND): Delete.
162 (OPTION_SILICON_ERRATA): Define.
163 (OPTION_SILICON_WARN): Define.
164 (md_parse_opton): Handle silicon errata options.
165 (md_longopts): Add silicon errata options.
166 (ms_show_usage): Report silicon errata options.
167 (msp430_srcoperand): Handle silicon errata.
168 (msp430_operands): Likewise. Improve nop insertion.
169 (msp430_fix_adjustable): Update warning generation.
170 * doc/c-msp430.texi: Document silicon errata options.
172 2015-10-22 H.J. Lu <hongjiu.lu@intel.com>
174 * configure.ac: Properly check
175 --enable-compressed-debug-sections={yes,all}.
176 * configure: Regenerated.
178 2015-10-22 H.J. Lu <hongjiu.lu@intel.com>
181 * configure.ac: Handle --enable-compressed-debug-sections=*,gas,*.
182 * configure: Regenerated.
184 2015-10-22 H.J. Lu <hongjiu.lu@intel.com>
186 * config/tc-i386.c (tc_i386_fix_adjustable): Handle
187 BFD_RELOC_X86_64_GOTPCRELX and BFD_RELOC_X86_64_REX_GOTPCRELX.
188 (tc_gen_reloc): Likewise.
189 (i386_validate_fix): Generate BFD_RELOC_X86_64_GOTPCRELX or
190 BFD_RELOC_X86_64_REX_GOTPCRELX if fx_tcbit2 is set.
191 * config/tc-i386.h (TC_FORCE_RELOCATION_LOCAL): Also return
192 true for BFD_RELOC_X86_64_GOTPCRELX and
193 BFD_RELOC_X86_64_REX_GOTPCRELX.
195 2015-10-22 H.J. Lu <hongjiu.lu@intel.com>
197 * config/tc-i386.c (tc_i386_fix_adjustable): Handle
198 BFD_RELOC_386_GOT32X.
199 (tc_gen_reloc): Likewise.
200 (match_template): Force 0x8b encoding for "mov foo@GOT, %eax".
201 (output_disp): Check for "call/jmp *mem", "mov mem, %reg",
202 "test %reg, mem" and "binop mem, %reg" where binop is one of
203 adc, add, and, cmp, or, sbb, sub, xor instructions. Set
204 fx_tcbit if the REX prefix is generated. Set fx_tcbit2 if
205 BFD_RELOC_386_GOT32X should be generated.
206 (i386_validate_fix): Generate BFD_RELOC_386_GOT32X if fx_tcbit2
209 2015-10-21 Nick Clifton <nickc@redhat.com>
212 * configure.ac: Restore --enable-compressed-debug-sections, with
213 options of all, none or gas.
214 Do not enable compressed debug sections by default for x86 Linux
216 * configure: Regenerate.
218 2015-10-20 H.J. Lu <hongjiu.lu@intel.com>
221 * NEWS: Update --enable-compressed-debug-sections=.
222 * configure.ac: Remove --enable-compressed-debug-sections.
223 (DEFAULT_FLAG_COMPRESS_DEBUG): Check
224 --enable-compressed-debug-sections={all,gas} instead of
225 --enable-compressed-debug-sections. For x86 Linux targets,
226 default to compressing debug sections.
227 * configure: Regenerated.
229 2015-10-19 Nick Clifton <nickc@redhat.com>
232 * configure.ac: Add option --enable-compressed-debug-sections.
233 This sets the default behaviour for compressing debug sections.
234 * as.c (flag_compress_debug): Define and initialise to
235 COMPRESS_DEBUG_GABI_ZLIB if DEFAULT_COMPRESS_DEBUG is set.
236 (show_usage): Indicate whether --no-compress-debug-sections
237 or --compress-debug-sections is the default.
238 * config/tc-i386.c (flag_compress_debug): Delete definition.
239 * doc/as.texinfo (--nocompress-debug-sectionas): Update
241 * NEWS: Announce the new feature.
242 * config.in: Regenerate.
243 * configure: Regenerate.
245 2015-10-12 Nick Clifton <nickc@redhat.com>
247 * config/tc-msp430.c (msp430_mcu_names): Rename to
248 msp430_mcu_data. Add fields for the ISA and hardware multiply
249 support. Update with information from the latest devices.csv
251 (md_parse_option): Make use of the new array.
253 2015-10-12 Andrew Burgess <andrew.burgess@embecosm.com>
255 * config/tc-avr.c (avr_output_property_record): Fix overwrite bug
256 for align and fill records.
257 (avr_handle_align): Record fill information for align frags.
258 (create_record_for_frag): Add next frag assertion, use correct
259 address for align records.
261 2015-10-10 Alan Modra <amodra@gmail.com>
264 * read.c (next_char_of_string): Mask char after escape. Use
265 CHAR_MASK rather than 0xff.
267 2015-10-07 Yao Qi <yao.qi@linaro.org>
269 * config/tc-aarch64.c (md_begin): Access field 'name' rather
272 2015-10-07 Claudiu Zissulescu <claziss@synopsys.com>
274 * config/tc-arc.c: Revamped file for ARC support.
275 * config/tc-arc.h: Likewise.
276 * doc/as.texinfo: Add new ARC options.
277 * doc/c-arc.texi: Likewise.
279 2015-10-02 Renlin Li <renlin.li@arm.com>
281 * config/tc-aarch64.c (s_tlsdescadd): New.
283 (md_pseudo_table): Handle tlsdescadd and tlsdescldr pseudo ops.
284 (reloc_table): Add entries for BFD_RELOC_AARCH64_TLSDESC_OFF_G0_NC and
285 BFD_RELOC_AARCH64_TLSDESC_OFF_G0_NC.
286 (process_movw_reloc_info): Support AARCH64_TLSDESC_OFF_G1 and
287 AARCH64_TLSDESC_OFF_G0_NC.
288 (md_apply_fix): Likewise.
289 (aarch64_force_relocation): Likewise.
291 2015-10-02 Renlin Li <renlin.li@arm.com>
293 * config/tc-aarch64.c (reloc_table): Add two entries for
294 gottprel_g0_nc and gottprel_g1.
295 (process_movw_reloc_info): Add support.
296 (md_apply_fix): Likewise.
297 (aarch64_force_relocation): Likewise.
299 2015-10-02 Renlin Li <renlin.li@arm.com>
301 * config/tc-aarch64.c (reloc_table): New relocation modifier tlsgd_g0_nc.
302 (process_movw_reloc_info): Support BFD_RELOC_AARCH64_TLSGD_MOVW_G1.
303 (md_apply_fix): Likewise.
304 (aarch64_force_relocation): Likewise.
306 2015-10-02 Renlin Li <renlin.li@arm.com>
308 * config/tc-aarch64.c (reloc_table): New relocation modifier tlsgd_g1.
309 (process_movw_reloc_info): Support BFD_RELOC_AARCH64_TLSGD_MOVW_G1.
310 (md_apply_fix): Likewise.
311 (aarch64_force_relocation): Likewise.
313 2015-10-02 Renlin Li <renlin.li@arm.com>
315 * config/tc-aarch64.c (reloc_table): New relocation modifier
317 (process_movw_reloc_info): Support gotoff_g0_nc.
318 (md_apply_fix): Likewise.
320 2015-10-02 Renlin Li <renlin.li@arm.com>
322 * config/tc-aarch64.c (reloc_table): New relocation modifier
324 (process_movw_reloc_info): Support newly added modifier.
325 (md_apply_fix): Likewise.
327 2015-09-29 Dominik Vogt <vogt@linux.vnet.ibm.com>
329 * doc/c-s390.texi: Add documentation.
330 Add missing code markup.
331 * config/tc-s390.c (current_flags): New static variable.
332 (s390_parse_cpu): Parse cpu flags a la "+nohtm" etc.
333 (s390_setup_opcodes): Use cpu flags to determine the set of opcodes.
335 (md_parse_option): Call s390_parse_cpu with the new signature.
336 (s390_machine): Likewise.
337 Keep track of current_flags.
339 undefine MAX_HISTORY at end of function.
340 (s390_machinemode): undefine MAX_HISTORY at end of function.
341 Update an error message.
343 2015-08-11 Peter Zotov <whitequark@whitequark.org>
346 * config/tc-or1k.c (tc_gen_reloc): Correct computation of PC
348 * config/tc-or1k.h (GAS_CGEN_PRCEL_R_TYPE): Delete.
350 2015-09-25 Ryo ONODERA <ryo_on@yk.rim.or.jp>
353 * configure.ac (nds32): Don't use bash == in tests.
354 * configure: Regenerate.
356 2015-09-23 Nick Clifton <nickc@redhat.com>
358 * config/tc-ppc.c (insn_validate): Cast PPC_OPSHIFT_INV to an int.
360 2015-09-22 Nick Clifton <nickc@redhat.com>
362 * config/tc-rx.c (nop_7): Recode using MAX.
364 2015-09-05 Chen Gang <gang.chen.5i5j@gmail.com>
366 * config/tc-avr.c (md_section_align): Append UL for -1 to avoid
367 the latest gcc's warning.
369 2015-08-27 Alan Modra <amodra@gmail.com>
372 * config/tc-aarch64.h (TC_START_LABEL): Redefine.
373 * config/tc-arm.c (tc_start_label_without_colon): Delete params.
374 Use input_line_pointer directly.
375 * config/tc-arm.h (TC_START_LABEL): Redefine.
376 (TC_START_LABEL_WITHOUT_COLON): Redefine.
377 (tc_start_label_without_colon): Update prototype.
378 * config/tc-bfin.c (bfin_start_label): Delete ptr param. Check
380 * config/tc-bfin.h (bfin_start_label): Update prototype.
381 (TC_START_LABEL): Redefine.
382 * config/tc-d30v.h (TC_START_LABEL): Redefine.
383 * config/tc-fr30.c (restore_colon): Rewrite.
384 (fr30_is_colon_insn): Add nul_char param. Return int. Bump
385 i_l_p over quote. Update restore_colon calls.
386 * config/tc-fr30.h (TC_START_LABEL): Redefine.
387 (fr30_is_colon_insn): Update prototype.
388 * config/tc-m32c.c (restore_colon, m32c_is_colon_insn): As above.
389 * config/tc-m32c.h (TC_START_LABEL): Redefine.
390 (m32c_is_colon_insn): Update prototype.
391 * config/tc-m32r.h (TC_START_LABEL): Redefine.
392 * config/tc-mep.h (TC_START_LABEL): Redefine.
393 * config/tc-nds32.h (TC_START_LABEL): Redefine.
394 * config/tc-tic54x.c (tic54x_start_label): Replace params with
395 nul_char and next_char. Step over trailing quote.
396 * config/tc-tic54x.h (TC_START_LABEL_WITHOUT_COLON): Redefine.
397 (tic54x_start_label): Update prototype.
398 * read.c (TC_START_LABEL): Redefine. Update invocation.
399 (TC_START_LABEL_WITHOUT_COLON): Update invocation.
400 * config/tc-nios2.c (s_nios2_set): Save initial input_line_pointer
401 and restore if calling s_set. Don't restore delim again.
403 2015-08-26 Alan Modra <amodra@gmail.com>
406 * config/tc-mn10200.c (md_assemble <mdr>): Move restore_line_pointer
407 call to where input line used to be restored.
408 * config/tc-mn10300.c (md_assemble <usp>): Remove redundant input
410 * config/tc-tilepro.c (parse_reg_expression): Add regname var.
412 2015-08-26 Nick Clifton <nickc@redhat.com>
415 * configure.ac (AS_CHECK_DECLS): Add asprintf.
416 * configure: Regenerate.
417 * config.in: Regenerate.
419 2015-08-25 Jose E. Marchesi <jose.marchesi@oracle.com>
421 * config/tc-sparc.c (priv_reg_table): New privileged register
424 2015-08-21 Nick Clifton <nickc@redhat.com>
427 * expr.c (get_symbol_end): Rename to get_symbol_name. Add a
428 return parameter pointing to the start of the symbol. Allow
429 symbol names enclosed in double quotes.
430 (restore_line_pointer): New function. Replace the NUL character
431 inserted into the input stream with the given character. If the
432 character was a double quote, advance the input pointer.
433 * expr.h (get_symbol_end): Delete.
434 (get_symbol_name): Add prototype.
435 (restore_line_pointer): Prototype.
436 * read.h (SKIP_WHITESPACE_AFTER_NAME): New macro.
437 * doc/as.texinfo (Symbol Intro): Document that symbol names can
438 now be enclosed in double quotes.
439 * cond.c (s_ifdef): Replace get_symbol_end with get_symbol_name.
440 Use restore_line_pointer to replace the NUL in the input stream.
441 Use SKIP_WHITESPACE_AFTER_NAME to skip past the end of a symbol.
442 Check for the use of double quoted symbol names.
444 * config/obj-aout.c: Likewise.
445 * config/obj-coff-seh.c: Likewise.
446 * config/obj-coff.c: Likewise.
447 * config/obj-elf.c: Likewise.
448 * config/obj-evax.c: Likewise.
449 * config/obj-macho.c: Likewise.
450 * config/obj-som.c: Likewise.
451 * config/tc-alpha.c: Likewise.
452 * config/tc-arc.c: Likewise.
453 * config/tc-arm.c: Likewise.
454 * config/tc-dlx.c: Likewise.
455 * config/tc-h8300.c: Likewise.
456 * config/tc-hppa.c: Likewise.
457 * config/tc-i370.c: Likewise.
458 * config/tc-i386-intel.c: Likewise.
459 * config/tc-i386.c: Likewise.
460 * config/tc-i960.c: Likewise.
461 * config/tc-ia64.c: Likewise.
462 * config/tc-iq2000.c: Likewise.
463 * config/tc-m32r.c: Likewise.
464 * config/tc-m68hc11.c: Likewise.
465 * config/tc-m68k.c: Likewise.
466 * config/tc-microblaze.c: Likewise.
467 * config/tc-mips.c: Likewise.
468 * config/tc-mmix.c: Likewise.
469 * config/tc-mn10200.c: Likewise.
470 * config/tc-mn10300.c: Likewise.
471 * config/tc-nios2.c: Likewise.
472 * config/tc-ppc.c: Likewise.
473 * config/tc-s390.c: Likewise.
474 * config/tc-score.c: Likewise.
475 * config/tc-score7.c: Likewise.
476 * config/tc-sparc.c: Likewise.
477 * config/tc-tic4x.c: Likewise.
478 * config/tc-tic54x.c: Likewise.
479 * config/tc-tic6x.c: Likewise.
480 * config/tc-tilegx.c: Likewise.
481 * config/tc-tilepro.c: Likewise.
482 * config/tc-v850.c: Likewise.
483 * config/tc-xtensa.c: Likewise.
484 * config/tc-z80.c: Likewise.
485 * dw2gencfi.c: Likewise.
486 * dwarf2dbgc.: Likewise.
491 2015-08-19 Jiong Wang <jiong.wang@arm.com>
493 * config/tc-aarch64.c (reloc_table): New relocation types support for
495 (ldst_lo12_determine_real_reloc_type): Support
496 BFD_RELOC_AARCH64_TLSLD_LDST16_DTPREL_LO12,
497 BFD_RELOC_AARCH64_TLSLD_LDST16_DTPREL_LO12_NC,
498 BFD_RELOC_AARCH64_TLSLD_LDST32_DTPREL_LO12,
499 BFD_RELOC_AARCH64_TLSLD_LDST32_DTPREL_LO12_NC,
500 BFD_RELOC_AARCH64_TLSLD_LDST64_DTPREL_LO12,
501 BFD_RELOC_AARCH64_TLSLD_LDST64_DTPREL_LO12_NC,
502 BFD_RELOC_AARCH64_TLSLD_LDST8_DTPREL_LO12,
503 BFD_RELOC_AARCH64_TLSLD_LDST8_DTPREL_LO12_NC.
504 (parse_operands): Likewise.
505 (md_apply_fix): Likewise.
506 (aarch64_force_relocation): Likewise.
507 (process_movw_reloc_info): Likewise.
509 2015-08-19 Jiong Wang <jiong.wang@arm.com>
511 * config/tc-aarch64.c (reloc_table): New relocation modifiers,
512 "dtprel_hi12", "dtprel_g0", "dtprel_g0_nc", "dtprel_g1",
513 "dtprel_g1_nc", "dtprel_g2".
514 (md_apply_fix): Support new relocation types.
515 (aarch64_force_relocation): Likewise.
516 (process_movw_reloc_info): Likewise.
518 2015-08-19 Jiong Wang <jiong.wang@arm.com>
520 * config/tc-aarch64.c (reloc_table): New relocation modifiers.
521 (md_apply_fix): Support BFD_RELOC_AARCH64_TLSLD_ADD_DTPREL_LO12_NC.
522 (aarch64_force_relocation): Likewise.
524 2015-08-17 Alan Modra <amodra@gmail.com>
526 * gas/config/tc-arm.c (s_align): Delete.
527 (md_pseudo_table): Use s_align_ptwo for "align".
528 * gas/config/tc-arm.h (TC_ALIGN_ZERO_IS_DEFAULT): Define.
529 * read.c (s_align): Modify for TC_ALIGN_ZERO_IS_DEFAULT.
531 2015-08-13 Alan Modra <amodra@gmail.com>
533 * expr.c (operand): Rewrite handling of operands starting with "0f".
534 If atof_generic only parses "-" or "+", treat as expression.
536 2015-08-13 Alan Modra <amodra@gmail.com>
537 DJ Delorie <dj@redhat.com>
539 * expr.c (integer_constant): Return O_absent expression if eol.
540 (operand): For targets with both LOCAL_LABELS_FB and
541 NUMBERS_WITH_SUFFIX set, treat "0b" not followed by binary
542 digits as a local label reference. Correct handling of 0b prefix.
543 If a suffix is not allowed, error on 0B.
545 2015-08-13 Alan Modra <amodra@gmail.com>
547 * doc/as.texinfo (Local Labels): Allowed range of N in local
548 labels is non-negative integers, not positive integers.
550 2015-08-12 David Weatherford <weath@cadence.com>
552 * config/tc-xtensa.c (struct litpool_frag, struct litpool_seg):
554 (xtensa_maybe_create_literal_pool_frag): New function.
555 (litpool_seg_list, auto_litpools, auto_litpool_limit)
556 (litpool_buf, litpool_slotbuf): New static variables.
557 (option_auto_litpools, option_no_auto_litpools)
558 (option_auto_litpool_limit): New enum identifiers.
559 (md_longopts): Add entries for auto-litpools, no-auto-litpools
560 and auto-litpool-limit.
561 (md_parse_option): Handle option_auto_litpools,
562 option_no_auto_litpools and option_auto_litpool_limit.
563 (md_show_usage): Add help for --[no-]auto-litpools and
564 --auto-litpool-limit.
565 (xtensa_mark_literal_pool_location): Record a place for literal
566 pool with a call to xtensa_maybe_create_literal_pool_frag.
567 (get_literal_pool_location): Find highest priority literal pool
568 or convert candidate to literal pool when auto-litpools are used.
569 (xg_assemble_vliw_tokens): Create literal pool after jump
571 (xtensa_check_frag_count): Create candidate literal pool every
572 auto_litpool_limit frags.
573 (xtensa_relax_frag): Add jump around literals to non-empty
575 (xtensa_move_literals): Estimate literal pool addresses and move
576 unreachable literals closer to their users, converting candidate
577 to literal pool if needed.
578 (xtensa_switch_to_non_abs_literal_fragment): Only emit error
579 about missing .literal_position in case auto-litpools are not
581 * config/tc-xtensa.h (xtensa_relax_statesE): New relaxation
582 state: RELAX_LITERAL_POOL_CANDIDATE_BEGIN.
583 * doc/as.texinfo (Xtensa options): Document --auto-litpools and
584 --no-auto-litpools options.
585 * doc/c-xtensa.texi (Xtensa options): Likewise.
587 2015-08-12 Simon Dardis <simon.dardis@imgtec.com>
589 * config/tc-mips.c (move_register): Change to use 'or' only.
590 (s_cpload, s_cpsetup, s_cprestore, s_cpreturn): Update to
593 2015-08-11 Jiong Wang <jiong.wang@arm.com>
595 * config/tc-aarch64.c (reloc_table): New relocation modifiers
597 (md_apply_fix): Support BFD_RELOC_AARCH64_TLSLD_ADD_DTPREL_LO12.
598 (aarch64_force_relocation): Likewise.
600 2015-08-11 Jiong Wang <jiong.wang@arm.com>
602 * config/tc-aarch64.c (reloc_table): New relocation modifiers.
603 (md_apply_fix): Support BFD_RELOC_AARCH64_TLSLD_ADD_LO12_NC.
604 (aarch64_force_relocation): Likewise.
606 2015-08-11 Jiong Wang <jiong.wang@arm.com>
608 * config/tc-aarch64.c (reloc_table): New relocation modifiers.
609 (md_apply_fix): Support BFD_RELOC_AARCH64_TLSLD_ADR_PAGE21.
610 (aarch64_force_relocation): Likewise.
612 2015-08-11 Nick Clifton <nickc@redhat.com>
615 * config/tc-arm.c (move_or_literal_pool): Use U suffix to remove
616 compile time warnings about constant expressions being shifted
618 (do_iwmmxt_wldstd): Likewise.
619 (do_iwmmxt_wrwrwr_or_imm5): Likewise.
620 (md_assemble): Likewise.
623 * config/tc-msp430.c (msp430_operands): Rewrite if statements to
624 remove redundant checks.
625 (md_apply_fix): Likewise.
628 * config/tc-mmix.c (md_assemble): Fix typo checking operands with
629 a numeric constant value.
632 * config/tc-tic4x.c (tic4x_insn_check): Fix typo.
635 * config/xtensa-relax.c (same_operand_name): Fix typo.
637 2015-08-08 Hans-Peter Nilsson <hp@axis.com>
639 * tc-arm.c (double_to_single, is_double_a_single): Append ULL to
640 0xFFFFFFFFFFFFF to avoid errors on 32-bit hosts.
642 2015-08-04 Thomas Preud'homme <thomas.preudhomme@arm.com>
644 * doc/c-aarch64.texi (.xword): Document directive.
646 2015-08-03 Nick Clifton <nickc@redhat.com>
648 * doc/as.texinfo (Overview): Add --hash-size to the synopsis and
649 fix typo in its entry: @kindex -> @item.
651 2015-07-28 Robert Suchanek <robert.suchanek@imgtec.com>
653 * config/tc-mips.c (mips_cpu_info_table): Add m5100 and m5101 entries.
654 * doc/c-mips.texi: Document m5100 and m5101 for -march=.
656 2015-07-28 Robert Suchanek <robert.suchanek@imgtec.com>
658 * config/tc-mips.c (mips_cpu_info_table): Add interaptiv entry.
659 * doc/c-mips.text: Document -march=interaptiv.
661 2015-07-27 H.J. Lu <hongjiu.lu@intel.com>
663 * configure: Regenerated.
665 2015-07-24 Nick Clifton <nickc@redhat.com>
667 * config/tc-rl78.c (rl78_abs_sym): New local variable.
668 (md_begin): Initialise the new symbol.
669 (OPIMM): Define the value to be relative to the new symbol and not
670 the absolute section symbol.
672 2015-07-22 Alan Modra <amodra@gmail.com>
675 * input-scrub.c (input_scrub_next_buffer): Rearrange and simplify
676 loop. Don't drop lines at end of file lacking a newline, add a
677 newline instead. Ensure partial_size is zero whenever
678 partial_where is NULL. Adjust buffer size for extra char.
679 (input_scrub_push, input_scrub_begin): Adjust buffer size here too.
681 2015-07-20 Matthew Wahab <matthew.wahab@arm.com>
683 * NEWS: Mention corrected spelling of armv6kz.
684 * config/tc-arm.c (arm_cpus): Replace ARM_ARCH_V6ZK with
686 (arm_archs): Likewise. Also add "armv6kz" and "armv6kzt2".
687 * doc/c-arm.texi: Replace "armv6zk" with "armv6kz".
689 2015-07-16 Jiong Wang <jiong.wang@arm.com>
691 * config/tc-aarch64.c (reloc_table): New relocation modifiers.
692 (md_apply_fix): Support BFD_RELOC_AARCH64_TLSLD_ADR_PREL21.
693 (aarch64_force_relocation): Ditto.
695 2015-07-16 Matthew Wahab <matthew.wahab@arm.com>
697 * config/tc-arm.c (arm_fpus): Add crypto-neon-fp-armv8.1.
698 * doc/c-arm.texi (-mfpu=): Likewise. Correct the entry for
701 2015-07-16 James Greenhalgh <james.greenhalgh@arm.com>
703 * config/tc-arm.c (md_assemble): Rephrase the "selected processor does
704 not support ARM mode" error messages.
706 2015-07-15 H.J. Lu <hongjiu.lu@intel.com>
708 * config/tc-i386.c (flag_compress_debug): Replace
709 COMPRESS_DEBUG_GNU_ZLIB with COMPRESS_DEBUG_GABI_ZLIB.
711 2015-07-14 H.J. Lu <hongjiu.lu@intel.com>
713 * as.c (parse_args): Make --compress-debug-sections and
714 --compress-debug-sections=zlib the same as
715 --compress-debug-sections=zlib-gabi.
716 * doc/as.texinfo: Change --compress-debug-sections and
717 --compress-debug-sections=zlib to zlib-gabi.
719 2015-07-09 Catherine Moore <clm@codesourcery.com>
721 * config/tc-mips.c (check_fpabi): Handle
722 VAL_GNU_MIPS_ABI_FP_NAN2008.
724 2015-07-08 Ciro Santilli <ciro.santilli@gmail.com>
726 * doc/as.texinfo: Clarify case requirements for pseudo ops.
728 2015-07-08 Pitchumani Sivanupandi <pitchumani.s@atmel.com>
730 * config/tc-avr.c (tc_gen_reloc): Change 32 bit relocation to
731 32 bit PC relative and update offset if the fixup is pc-relative.
732 * config/tc-avr.h (DIFF_EXPR_OK): Define to enable PC relative diff
735 2015-07-03 Alan Modra <amodra@gmail.com>
737 * config/tc-ppc.c (md_show_usage): Add -m821, -m850, -m860.
738 * doc/c-ppc.texi (PowerPC-Opts): Likewise.
740 2015-07-01 Sandra Loosemore <sandra@codesourcery.com>
741 Cesar Philippidis <cesar@codesourcery.com>
743 * config/tc-nios2.c (nios2_min_align): New.
744 (nop): Replace with....
745 (nop_r1, nop_r2, nop_r2_cdx, nop32, nop16): New.
746 (nios2_align): Handle alignment on 2-byte boundaries when CDX
747 instructions may be present.
748 (s_nios2_align): Adjust reference to nop.
749 (CDXBRANCH, IS_CDXBRANCH): New.
750 (CDX_UBRANCH_SUBTYPE, CDX_CBRANCH_SUBTYPE): New.
751 (nios2_relax_subtype_size): Handle 2-byte CDX branches.
752 (nios2_relax_frag): Likewise.
753 (md_convert_frag): Handle R2 encodings.
754 (nios2_check_overflow): Check that low-order bits are zero
755 before applying rightshift from howto.
756 (nios2_check_overflow): Correct negative overflow calculation.
757 (nios2_diagnose_overflow): Handle signed_immed12_overflow. Issue
758 generic overflow messages for miscellaneous instruction formats.
759 (md_apply_fix): Recognize new R2 relocations. For pc_relative
760 relocations, store fixup in *valP.
761 (nios2_reglist_mask, nios2_reglist_dir): New.
762 (nios2_parse_reglist): New.
763 (nios2_parse_base_register): New.
764 (nios2_assemble_expression): Handle constant expressions designated
766 (nios2_assemble_reg3): New.
767 (nios2_assemble_arg_c): Handle R2 instruction formats.
768 (nios2_assemble_arg_d): Likewise.
769 (nios2_assemble_arg_s): Likewise.
770 (nios2_assemble_arg_t): Likewise.
771 (nios2_assemble_arg_D): New.
772 (nios2_assemble_arg_S): New.
773 (nios2_assemble_arg_T): New.
774 (nios2_assemble_arg_i): Handle R2 instruction formats.
775 (nios2_assemble_arg_I): New.
776 (nios2_assemble_arg_u): Handle R2 instruction formats.
777 (nios2_assemble_arg_U): New.
778 (nios2_assemble_arg_V): New.
779 (nios2_assemble_arg_W): New.
780 (nios2_assemble_arg_X): New.
781 (nios2_assemble_arg_Y): New.
782 (nios2_assemble_arg_o): Handle R2 instruction formats.
783 (nios2_assemble_arg_O): New.
784 (nios2_assemble_arg_P): New.
785 (nios2_assemble_arg_j): Handle R2 instruction formats.
786 (nios2_assemble_arg_k): New.
787 (nios2_assemble_arg_l): Handle R2 instruction formats.
788 (nios2_assemble_arg_m): Likewise.
789 (nios2_assemble_arg_M): New.
790 (nios2_assemble_arg_N): New.
791 (nios2_assemble_arg_e): New.
792 (nios2_assemble_arg_f): New.
793 (nios2_assemble_arg_g): New.
794 (nios2_assemble_arg_h): New.
795 (nios2_assemble_arg_R): New.
796 (nios2_assemble_arg_B): New.
797 (nios2_assemble_args): Handle new argument letters.
798 (nios2_consume_arg): Likewise.
799 (nios2_translate_pseudo_insn): Avoid dereferencing null pointer
801 (nios2_ps_insn_info_structs): Add nop.n.
802 (output_ubranch): Handle CDX branches.
803 (output_cbranch): Likewise.
804 (output_call): Handle R2 encodings.
805 (output_movia): Likewise.
806 (md_begin): Initialize nios2_min_align.
807 (md_assemble): Align to nios2_min_align. Adjust nios2_min_align
808 if a 16-bit instruction is seen.
809 (nios2_cons_align): Use appropriate nop pattern.
811 2015-07-01 Sandra Loosemore <sandra@codesourcery.com>
812 Cesar Philippidis <cesar@codesourcery.com>
814 * config/tc-nios2.c: Adjust includes.
815 (OPTION_MARCH): Define.
816 (md_longopts): Add -march option.
817 (nios2_architecture): New.
818 (nios2_use_arch): New.
819 (md_parse_option): Handle OPTION_MARCH.
820 (md_show_usage): Document -march.
821 (md_begin): Set arch in BFD.
822 (nios2_elf_final_processing): New.
823 * config/tc-nios2.h (elf_tc_final_processing): Define.
824 (nios2_elf_final_processing): New.
825 * doc/c-nios2.texi (-march): Add documentation.
827 2015-06-30 Amit Pawar <Amit.Pawar@amd.com>
829 * config/tc-i386.c (cpu_arch): Add .mwaitx.
830 (process_immext): Check operands for monitorx/mwaitx instructions.
831 * doc/c-i386.texi: Document mwaitx.
833 2015-06-28 H.J. Lu <hongjiu.lu@intel.com>
835 * as.c (parse_args): Replace COMPRESS_DEBUG_ZLIB with
836 COMPRESS_DEBUG_GNU_ZLIB.
837 * config/tc-i386.c (flag_compress_debug): Likewise.
839 2015-06-24 H.J. Lu <hongjiu.lu@intel.com>
841 * doc/as.texinfo (.cfi_lsda): Remove the extra @section.
843 2015-06-19 Peter Bergner <bergner@vnet.ibm.com>
845 * config/tc-ppc.c (md_assemble): Use ppc_optional_operand_value.
846 Allow for optional operands without insert functions.
848 2015-06-18 Nick Clifton <nickc@redhat.com>
851 * config/tc-arm.c (md_apply_fix): Add support for ADR in thumb
852 mode against a nearby symbol.
854 2015-06-18 Nick Clifton <nickc@redhat.com>
857 * config/tc-arm.c (tc_gen_reloc): Include BFD_RELOC_ARM_TLS_LE32
858 in the same case as BFD_RELOC_ARM_TLS_IS32.
860 2015-06-17 Nick Clifton <nickc@redhat.com>
862 * config/tc-arm.c (is_double_a_single): Make conditional upon the
863 availablity of a 64-bit type. Use this type for the argument and
865 (double_to_single): Likewise.
866 * config/tc-arm.c (move_or_literal_pool): Use a 64-bit type for
867 the constant value, if available. Generate a 64-bit value from a
868 bignum if supported. Only perform the second optimization for
869 PR 18500 if the 64-bit type is available.
871 2015-06-17 Alessandro Marzocchi <alessandro.marzocchi@gmail.com>
874 * config/tc-arm.c (is_double_a_single): New function.
875 (double_to_single): New function.
876 (move_or_literal_pool): Add support for converting VLDR to VMOV.
879 * config/tc-arm.c (move_or_literal_pool): Add support for LDR Rx,=
880 to MOV.w or MVN.w for Thumb2.
882 2015-06-17 Nicolas Pitre <nico@linaro.org>
884 * as.c (show_usage): Document --sectname-subst.
885 (parse_args): Add --sectname-subst.
886 * as.h (flag_sectname_subst): New.
887 * config/obj-elf.c (obj_elf_section_name): Add %S substitution.
888 * doc/as.texinfo: Document it.
890 2015-06-15 Renlin Li <renlin.li@arm.com>
892 * config/tc-aarch64.c (reloc_table): New relocation modifier.
893 (md_apply_fix): Support BFD_RELOC_AARCH64_LD64_GOTOFF_LO15.
894 (aarch64_force_relocation): Ditto
896 2015-06-13 Mark Wielaard <mjw@redhat.com>
898 * dwarf2dbg.c (out_header): Document EXPR->X_add_number value,
899 out_debug_aranges depends on it.
900 (out_debug_aranges): Track size of header to properly pad header
901 for address alignment.
903 2015-06-11 John David Anglin <danglin@gcc.gnu.org>
906 * gas/config/tc-hppa.c (last_label_symbol): Declare.
907 (pa_get_label): Return last label in current space/segment or NULL.
908 (pa_define_label): Record last label and add to root.
909 (pa_undefine_label): Remove last label from root.
911 2015-06-08 Nick Clifton <nickc@redhat.com>
913 * config/tc-rx.c (rx_op): Correct handling of integer bignums.
915 2015-06-04 Matthew Wahab <matthew.wahab@arm.com>
917 * NEWS: Mention ARMv8.1 support in the Aarch64 port.
918 * config/tc-aarch64.c (aarch64_arch_option_table): Add "armv8.1-a".
919 * doc/c-aarch64.texi (-march): Add "armv8.1-a".
921 2015-06-04 Renlin Li <renlin.li@arm.com>
923 * config/tc-arm.c (arm_init_frag): Use frag's thumb_mode information
926 2015-06-04 Nick Clifton <nickc@redhat.com>
928 * config/tc-h8300.c (md_section_align): Fix compile time warning
929 about left shifting a negative value.
931 2015-06-03 Matthew Wahab <matthew.wahab@arm.com>
933 * config/tc-arm.c (arm_archs): Add "armv8.1-a".
934 * doc/c-arm.texi (ARM Options, -march): Add "armv8.1-a".
935 * NEWS: Mention ARMv8.1 support.
937 2015-06-02 Matthew Wahab <matthew.wahab@arm.com>
939 * config/tc-arm.c (arm_ext_pan): New.
940 (do_setpan): New, encode an ARM SETPAN instruction.
941 (do_t_setpan): New, encode a Thumb SETPAN instruction.
942 (insns): Add "setpan".
943 (arm_extensions): Add "pan".
944 * doc/c-arm.texi (ARM Options): Add "pan" to list of -mcpu processor
947 2015-06-02 Matthew Wahab <matthew.wahab@arm.com>
949 * config/tc-aarch64.c (aarch64_features): Add "rdma".
950 * doc/c-aarch64.texi (AArch64 Extensions): Add "rdma".
952 2015-06-02 Matthew Wahab <matthew.wahab@arm.com>
954 * config/tc-aarch64.c (aarch64_features): Add "lor".
955 * doc/c-aarch64.c (Aarch64 Extensions): Add "lor" to list of
956 architecture extensions.
958 2015-06-01 Matthew Wahab <matthew.wahab@arm.com>
960 * config/tc-aarch64.c (parse_sys_reg): New parameter. Check target
961 support. Fix whitespace.
962 (parse_operands): Update for parse_sys_reg changes.
963 (aarch64_features): Add "pan".
964 * doc/c-aarch64.texi (Aarch64 Extensions): Add "pan".
966 2015-06-01 Jiong Wang <jiong.wang@arm.com>
968 * config/tc-aarch64.c (reloc_table): New relocation modifiers.
969 (md_apply_fix): Support BFD_RELOC_AARCH64_LD32_GOTPAGE_LO14.
970 (aarch64_force_relocation): Ditto.
972 2015-06-01 Jiong Wang <jiong.wang@arm.com>
974 * config/tc-aarch64.c (reloc_table): New relocation modifiers.
975 (md_apply_fix): Support BFD_RELOC_AARCH64_LD64_GOTPAGE_LO15.
976 (aarch64_force_relocation): Ditto.
978 2015-05-28 Catherine Moore <clm@codesourcery.com>
979 Bernd Schmidt <bernds@codesourcery.com>
980 Paul Brook <paul@codesourcery.com>
983 * config/tc-alpha.c (all_cfi_sections): Declare.
984 (s_alpha_ent): Initialize all_cfi_sections.
985 (alpha_elf_md_end): Invoke cfi_set_sections.
986 * config/tc-mips.c (md_apply_fix): Handle BFD_RELOC_NONE.
987 (s_ehword): Use BFD_RELOC_32_PCREL.
988 (mips_fix_adjustable): Handle BFD_RELOC_32_PCREL.
989 (mips_cfi_reloc_for_encoding): New function.
990 * tc-mips.h (DWARF2_FDE_RELOC_SIZE): Redefine.
991 (DWARF2_FDE_RELOC_ENCODING): Define.
992 (tc_cfi_reloc_for_encoding): Define.
993 (mips_cfi_reloc_for_encoding): Define.
994 (tc_compact_eh_opcode_stop): Define.
995 (tc_compact_eh_opcode_pad): Define.
996 * doc/as.texinfo: Document Compact EH extensions.
997 * doc/internals.texi: Likewise.
998 * dw2gencfi.c (EH_FRAME_LINKONCE): Redefine.
999 (tc_cfi_reloc_for_encoding): Provide default.
1000 (compact_eh): Declare.
1001 (emit_expr_encoded): New function.
1002 (get_debugseg_name): Add Compact EH support.
1003 (alloc_debugseg_item): Likewise.
1004 (cfi_set_sections): New function.
1005 (dot_cfi_fde_data): New function.
1006 (dot_cfi_personality_id): New function.
1007 (dot_cfi_inline_lsda): New function.
1008 (cfi_pseudo_table): Add cfi_fde_data, cfi_personality_id,
1009 and cfi_inline_lsda.
1010 (dot_cfi_personality): Add Compact EH support.
1011 (dot_cfi_lsda): Likewise.
1012 (dot_cfi_sections): Likewise.
1013 (dot_cfi_startproc): Likewise.
1014 (get_cfi_seg): Likewise.
1015 (output_compact_unwind_data): New function.
1016 (output_cfi_insn): Add Compact EH support.
1017 (output_cie): Likewise.
1018 (output_fde): Likewise.
1019 (cfi_finish): Likewise.
1020 (cfi_emit_eh_header): New function.
1021 (output_eh_header): New function.
1022 * dw2gencfi.h (cfi_set_sections): Declare.
1023 (SUPPORT_COMPACT_EH): Define.
1024 (MULTIPLE_FRAME_SECTIONS): Define.
1025 New enumeration to describe the Compact EH header format.
1026 (fde_entry): Add new fields personality_id, eh_header_type, eh_data_size,
1027 eh_data, eh_loc and sections.
1028 (CFI_EMIT_eh_frame, CFI_EMIT_debug_frame, CFI_EMIT_target,
1029 CFI_EMIT_eh_frame_compact): Define.
1031 2015-05-26 Max Filippov <jcmvbkbc@gmail.com>
1033 * config/tc-xtensa.c (xtensa_move_literals): Check that
1034 search_frag is non-NULL. Report error if literal frag is not
1037 2015-05-22 Nick Clifton <nickc@redhat.com>
1040 * read.c (output_big_sleb128): Use U suffix to prevent compile
1043 2015-05-19 Jiong Wang <jiong.wang@arm.com>
1045 * config/tc-aarch64.c (process_movw_reloc_info): Sort relocation case
1046 labels alphabetically.
1047 (md_apply_fix): Ditto.
1048 (aarch64_force_relocation): Ditto.
1050 2015-05-15 H.J. Lu <hongjiu.lu@intel.com>
1053 * config/tc-i386.c (OPTION_MAMD64): New.
1054 (OPTION_MINTEL64): Likewise.
1055 (md_longopts): Add -mamd64 and -mintel64.
1056 (md_parse_option): Handle OPTION_MAMD64 and OPTION_MINTEL64.
1057 (md_show_usage): Add -mamd64 and -mintel64.
1058 * doc/c-i386.texi: Document -mamd64 and -mintel64.
1060 2015-05-15 H.J. Lu <hongjiu.lu@intel.com>
1062 * config/tc-i386.c (shared): New.
1063 (OPTION_MSHARED): Likewise.
1064 (elf_symbol_resolved_in_segment_p): Add relocation argument.
1065 Check PLT relocations and shared.
1066 (md_estimate_size_before_relax): Pass fragP->fr_var to
1067 elf_symbol_resolved_in_segment_p.
1068 (md_longopts): Add -mshared.
1069 (md_show_usage): Likewise.
1070 (md_parse_option): Handle OPTION_MSHARED.
1071 * doc/c-i386.texi: Document -mshared.
1073 2015-05-14 H.J. Lu <hongjiu.lu@intel.com>
1075 * write.c (compress_debug): Don't write the zlib header, which
1076 is handled by bfd_update_compression_header.
1078 2015-05-13 Max Filippov <jcmvbkbc@gmail.com>
1080 * config/tc-xtensa.c (xtensa_relax_frag): Allow trampoline to be
1081 closer than J_RANGE / 2 to jump frag.
1083 2015-05-11 H.J. Lu <hongjiu.lu@intel.com>
1085 * configure.tgt (arch): Set to iamcu for i386-*-elfiamcu target.
1086 * config/tc-i386.c (i386_mach): Support iamcu.
1087 (i386_target_format): Likewise.
1089 2015-05-11 H.J. Lu <hongjiu.lu@intel.com>
1091 * config/tc-i386.c (cpu_arch): Add iamcu.
1092 (i386_align_code): Handle PROCESSOR_IAMCU.
1093 (i386_arch): Likewise.
1094 (i386_mach): Likewise.
1095 (i386_target_format): Likewise.
1096 (valid_iamcu_cpu_flags): New function.
1097 (check_cpu_arch_compatible): Only allow Intel MCU instructions
1098 when targeting Intel MCU.
1099 (set_cpu_arch): Call valid_iamcu_cpu_flags to check if CPU flags
1100 are valid for Intel MCU.
1101 (md_parse_option): Likewise.
1102 * tc-i386.h (ELF_TARGET_IAMCU_FORMAT): New.
1103 (processor_type): Add PROCESSOR_IAMCU.
1104 * doc/c-i386.texi: Document iamcu.
1106 2015-05-08 Nick Clifton <nickc@redhat.com>
1109 * config/tc-arm.h (TC_EQUAL_IN_INSN): Define.
1110 * config/tc-arm.c (arm_tc_equal_in_insn): New function. Move
1111 the symbol name checking code to here from...
1112 (md_undefined_symbo): ... here.
1114 2015-05-07 H.J. Lu <hongjiu.lu@intel.com>
1116 * config/tc-i386.c (elf_symbol_resolved_in_segment_p): New.
1117 (md_estimate_size_before_relax): Use it.
1119 2015-05-06 Jose E. Marchesi <jose.marchesi@oracle.com>
1121 * config/tc-sparc.c: Typo in comment fixed.
1123 2015-05-06 Jose E. Marchesi <jose.marchesi@oracle.com>
1125 * config/tc-sparc.c (sparc_ip): Support the %ncc "natural"
1127 * doc/c-sparc.texi (Sparc-Regs): Document %ncc.
1129 2015-05-06 Nick Clifton <nickc@redhat.com>
1131 * doc/as.texinfo (Dollar Local Labels): Note that these are only
1132 supported on some targets.
1134 2015-05-06 Renlin Li <renlin.li@arm.com>
1136 * config/tc-aarch64.c (mapping_state): Recording alignment before exit.
1138 2015-05-05 Renlin Li <renlin.li@arm.com>
1140 * config/tc-aarch64.c (aarch64_init_frag): Always generate mapping
1143 2015-05-05 Nick Clifton <nickc@redhat.com>
1145 * config/tc-msp430.c (MAX_OP_LEN): Increase to 4096.
1146 (msp430_make_init_symbols): New function.
1147 (msp430_section): Call it.
1148 (msp430_frob_section): Likewise.
1150 2015-05-02 Max Filippov <jcmvbkbc@gmail.com>
1152 * config/tc-xtensa.c (cached_fixupS, fixup_cacheS): New typedefs.
1153 (struct cached_fixup, struct fixup_cache): New structures.
1154 (fixup_order, xtensa_make_cached_fixup),
1155 (xtensa_realloc_fixup_cache, xtensa_cache_relaxable_fixups),
1156 (xtensa_find_first_cached_fixup, xtensa_delete_cached_fixup),
1157 (xtensa_add_cached_fixup): New functions.
1158 (xtensa_relax_frag): Cache fixups pointing at potentially
1159 oversized jumps at the beginning of every relaxation pass. Only
1160 check subset of this cache in the reach of single jump from the
1161 trampoline frag currently being relaxed.
1163 2015-05-01 Nick Clifton <nickc@redhat.com>
1165 * config/rl78-parse.y (MULU): Remove ISA_G14.
1166 (MULH, DIVHU, DIVWU, MACHI, MACH): Update error strings.
1168 2015-05-01 H.J. Lu <hongjiu.lu@intel.com>
1170 * config/tc-i386.c (i386_elf_emit_arch_note): Removed.
1171 * config/tc-i386.h (md_end): Likewise.
1172 (i386_elf_emit_arch_note): Likewise.
1174 2015-05-01 H.J. Lu <hongjiu.lu@intel.com>
1176 * configure.tgt: Support i386-*-elf*.
1178 2015-04-30 DJ Delorie <dj@redhat.com>
1180 * config/rl78-defs.h (rl78_isa_g10): New.
1181 (rl78_isa_g13): New.
1182 (rl78_isa_g14): New.
1183 * config/rl78-parse.y (ISA_G10): New.
1186 (MULHU, MULH, MULU, DIVHU, DIVWU, MACHU, MACH): Use them.
1187 * config/tc-rl78.c (rl78_isa_g10): New.
1188 (rl78_isa_g13): New.
1189 (rl78_isa_g14): New.
1191 2015-04-30 H.J. Lu <hongjiu.lu@intel.com>
1193 * config/tc-i386.c (i386_target_format): Use "else if" on
1196 2015-04-30 Nick Clifton <nickc@redhat.com>
1199 * config/tc-arm.c (md_undefined_symbol): Issue a warning message
1200 (if enabled) when the user creates a symbol with the same name as
1202 (flag_warn_syms): New static variable.
1203 (arm_opts): Add mwarn-syms and mno-warn-syms.
1204 * doc/c-arm.texi (ARM Options): Document the -m[no-]warn-syms
1208 * doc/as.texinfo (Zero): Add documentation of the .zero pseudo-op.
1210 2015-04-29 Nick Clifton <nickc@redhat.com>
1213 * config/tc-arm.c (encode_arm_cp_address): Issue an error message
1214 if the operand is neither a register nor a vector.
1216 2015-04-29 Nick Clifton <nickc@redhat.com>
1218 * doc/as.texinfo (Set): Note that a symbol cannot be set multiple
1219 times if the expression is not constant and the target uses linker
1222 2015-04-28 Renlin Li <renlin.li@arm.com>
1224 * config/tc-arm.c (arm_init_frag): Always emit mapping symbols.
1226 2015-04-28 Nick Clifton <nickc@redhat.com>
1229 * cond.c (s_if): Stop compile time warning about stopc being used
1233 2015-04-27 Renlin Li <renlin.li@arm.com>
1235 * config/tc-aarch64.c (s_aarch64_inst): Don't align code for non-text
1237 (md_assemble): Likewise, move the align code outside the loop.
1239 2015-04-24 Jim Wilson <jim.wilson@linaro.org>
1241 * config/tc-aarch64.c (aarch64_cpus): Add CRC and CRYPTO features
1244 2015-04-24 Richard Earnshaw <rearnsha@arm.com>
1246 * config/tc-arm.h (arm_min): New function.
1247 (SUB_SEGMENT_ALIGN): Define.
1249 2015-04-23 Matthew Fortune <matthew.fortune@imgtec.com>
1251 * config/tc-mips.c (macro): State the recommended way of creating
1252 32-bit or 64-bit addresses.
1254 2015-04-23 Jan Beulich <jbeulich@suse.com>
1256 * config/tc-i386.c (match_mem_size): Also allow no size
1257 specification when broadcasting.
1259 2015-04-20 H.J. Lu <hongjiu.lu@intel.com>
1261 * doc/as.texinfo (Bundle directives): Shorten menu entry and
1263 (CFI directives): Use @subsection.
1264 (SH-Dependent, SH64-Dependent): Moved after SCORE-Dependent.
1265 * doc/c-i386.texi (i386-Mnemonics): Use @subsection.
1267 2015-04-17 Senthil Kumar Selvaraj <senthil_kumar.selvaraj@atmel.com>
1269 * config/tc-avr.c (create_record_for_frag): Rename link to
1272 2015-04-15 H.J. Lu <hongjiu.lu@intel.com>
1275 --compress-debug-sections=[none|zlib|zlib-gnu|zlib-gabi].
1277 2015-04-14 H.J. Lu <hongjiu.lu@intel.com>
1279 * as.h (compressed_debug_section_type): Removed.
1281 2015-04-14 Nick Clifton <nickc@redhat.com>
1283 * config/tc-rl78.h (TC_LINKRELAX_FIXUP): Define.
1284 (TC_FORCE_RELOCATION_SUB_SAME): Define.
1285 (DWARF2_USE_FIXED_ADVANCE_PC): Define.
1287 2015-04-10 Nick Clifton <nickc@redhat.com>
1290 * doc/c-arm.texi (ARM Options): Add a note about the interaction of
1291 the -EB option with the linker's --be8 option.
1293 2015-04-09 Hans-Peter Nilsson <hp@axis.com>
1295 * doc/c-rx.texi: Fix markup typos in last change.
1297 2015-04-09 Nick Clifton <nickc@redhat.com>
1299 * config/tc-rx.c (enum options): Add OPTION_DISALLOW_STRING_INSNS.
1300 (md_longopts): Add -mno-allow-string-insns.
1301 (md_parse_option): Handle -mno-allow-string-insns.
1302 (md_show_usage): Mention -mno-allow-string-insns.
1303 (rx_note_string_insn_use): New function. Produces an error
1304 message if a string insn is used when it is not allowed.
1305 * config/rx-parse.y (SCMPU): Call rx_note_string_insn_use.
1306 (SMOVU, SMOVB, SMOVF, SUNTIL, SWHILE, RMPA): Likewise.
1307 * config/rx-defs.h (rx_note_string_insn_use): Prototype.
1308 * doc/c-rx.texi: Document -mno-allow-string-insns.
1310 2015-04-08 H.J. Lu <hongjiu.lu@intel.com>
1312 * as.c (show_usage): Update --compress-debug-sections.
1313 (std_longopts): Use optional_argument on compress-debug-sections.
1314 (parse_args): Handle
1315 --compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}.
1316 * as.h (compressed_debug_section_type): New.
1317 (flag_compress_debug): Change type to compressed_debug_section_type.
1318 --compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}.
1319 * write.c (compress_debug): Set BFD_COMPRESS_GABI for
1320 --compress-debug-sections=zlib-gabi. Call
1321 bfd_get_compression_header_size to get compression header size.
1322 Don't rename section name for --compress-debug-sections=zlib-gabi.
1323 * config/tc-i386.c (compressed_debug_section_type): Set to
1324 COMPRESS_DEBUG_ZLIB.
1325 * doc/as.texinfo: Document
1326 --compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}.
1328 2015-04-07 Renlin Li <renlin.li@arm.com>
1330 * config/tc-aarch64.c (mapping_state): Use subseg_text_p.
1331 (s_aarch64_inst): Likewise.
1332 (md_assemble): Likewise.
1334 2015-04-06 H.J. Lu <hongjiu.lu@intel.com>
1336 * write.c (compress_debug): Use bfd_putb64 to write uncompressed
1339 2015-04-05 H.J. Lu <hongjiu.lu@intel.com>
1341 * write.c (compress_debug): Don't write the zlib header if
1342 compressed section size is the same as before compression.
1344 2015-04-02 Nick Clifton <nickc@redhat.com>
1347 * config/tc-microblaze.c (parse_imm): Use offsetT as the type for
1348 min and max parameters. Sign extend values before testing.
1350 2015-04-02 Renlin Li <renlin.li@arm.com>
1352 * config/tc-aarch64.c (mapping_state): Emit MAP_DATA within text section in order.
1353 (mapping_state_2): Don't emit MAP_DATA here.
1354 (s_aarch64_inst): Align frag during state transition.
1355 (md_assemble): Likewise.
1357 2015-04-02 Ed Maste <emaste@freebsd.org>
1359 * config/tc-aarch64.c (set_error_kind): Delete.
1360 (set_error_message): Delete.
1362 2015-04-02 H.J. Lu <hongjiu.lu@intel.com>
1364 * configure: Regenerated.
1366 2015-04-01 Evandro Menezes <e.menezes@samsung.com>
1368 * config/tc-aarch64.c: Add support for Samsung Exynos M1.
1369 * doc/c-aarch64.texi (-mcpu=): Add "exynos-m1".
1371 2015-04-01 Evandro Menezes <e.menezes@samsung.com>
1373 * config/tc-arm.c: Add support for Samsung Exynos M1.
1374 * doc/c-arm.texi (-mcpu=): Add "exynos-m1".
1376 2015-04-01 H.J. Lu <hongjiu.lu@intel.com>
1378 * configure: Regenerated.
1380 2015-03-31 Ed Schouten <ed@nuxi.nl>
1382 * configure.tgt (fmt): Set to elf for *-*-cloudabi*.
1384 2015-03-31 H.J. Lu <hongjiu.lu@intel.com>
1386 * configure.ac: Revert the AM_ZLIB change.
1387 * Makefile.in: Regenerated.
1388 * aclocal.m4: Likewise.
1389 * configure: Likewise.
1391 2015-03-31 H.J. Lu <hongjiu.lu@intel.com>
1393 * Makefile.am (ZLIBINC): New.
1394 (AM_CFLAGS): Add $(ZLIBINC).
1395 * as.c: (show_usage): Don't check HAVE_ZLIB_H.
1396 (parse_args): Likewise.
1397 * compress-debug.c: Don't check HAVE_ZLIB_H to include <zlib.h>.
1398 (compress_init): Don't check HAVE_ZLIB_H.
1399 (compress_data): Likewise.
1400 (compress_finish): Likewise.
1401 * configure.ac (AM_ZLIB): Removed.
1402 (zlibinc): New. AC_SUBST.
1403 Add --with-system-zlib.
1404 * Makefile.in: Regenerated.
1405 * config.in: Likewise.
1406 * configure: Likewise.
1407 * doc/Makefile.in: Likewise.
1409 2015-03-27 H.J. Lu <hongjiu.lu@intel.com>
1411 * config/tc-i386.c (cpu_flags_set): Removed.
1413 2015-03-25 Renlin Li <renlin.li@arm.com>
1415 * config/tc-aarch64.c (mapping_state): Remove first MAP_DATA emitting
1417 (mapping_state_2): Emit first MAP_DATA symbol here.
1419 2015-03-24 H.J. Lu <hongjiu.lu@intel.com>
1422 * write.c (compress_debug): Don't write the zlib header if
1423 compression didn't make the section smaller.
1425 2015-03-24 Terry Guo <terry.guo@arm.com>
1427 * config/tc-arm.c (no_cpu_selected): Use new macro to compare
1429 (parse_psr): Likewise.
1430 (do_t_mrs): Likewise.
1431 (do_t_msr): Likewise.
1432 (static const arm_feature_set arm_ext_*): Defined with new macros.
1433 (static const arm_feature_set arm_cext_*): Likewise.
1434 (static const arm_feature_set fpu_fpa_ext_*): Likewise.
1435 (static const arm_feature_set fpu_vfp_ext_*): Likewise.
1436 (deprecated_coproc_regs): Likewise.
1437 (UL_BARRIER): Likewise.
1438 (barrier_opt_names): Likewise.
1439 (arm_cpus): Likewise.
1440 (arm_extensions): Likewise.
1442 2015-03-20 H.J. Lu <hongjiu.lu@intel.com>
1444 * config/tc-i386.c (i386_align_code): Limit multi-byte nop
1445 instructions to 10 bytes.
1447 2015-03-19 Nick Clifton <nickc@redhat.com>
1449 * config/tc-rl78.c (enum options): Add G13 and G14.
1450 (md_longopts): Add -mg13 and -mg14.
1451 (md_parse_option): Handle -mg13 and -mg14.
1452 (md_show_usage): List -mg13 and -mg14.
1453 * doc/c-rl78.texi: Add description of -mg13 and -mg14 options.
1455 2015-03-18 Jon Turney <jon.turney@dronecode.org.uk>
1456 Nick Clifton <nickc@redhat.com>
1459 * doc/as.texinfo: Note that when gas compresses debug sections the
1460 compression is only performed if it makes the section smaller.
1461 * write.c (compress_debug): Do not compress a debug section if
1462 doing so would make it larger.
1464 2015-03-17 Ganesh Gopalasubramanian <Ganesh.Gopalasubramanian@amd.com>
1466 * config/tc-i386.c (cpu_arch): Add PROCESSOR_ZNVER flags.
1467 (i386_align_code): Add PROCESSOR_ZNVER cases.
1468 * config/tc-i386.h (processor_type): Add PROCESSOR_ZNVER.
1469 * doc/c-i386.texi: Add znver1 and clzero.
1471 2015-03-16 Nick Clifton <nickc@redhat.com>
1473 * dwarf2dbg.c (out_header): Remove spurious #if 1.
1475 2015-03-13 Jiong Wang <jiong.wang@arm.com>
1477 * config/tc-aarch64.c (warn_unpredictable_ldst): Don't warn on reg
1480 2015-03-13 Jiong Wang <jiong.wang@arm.com>
1482 * config/tc-aarch64.h (SUB_SEGMENT_ALIGN): Define to be zero.
1484 2015-03-12 Andrew Bennett <andrew.bennett@imgtec.com>
1486 * config/tc-mips.c (mips_cpu_info_table): Add i6400 entry.
1487 * doc/c-mips.texi: Document i6400 -march option.
1489 2015-03-12 Nick Clifton <nickc@redhat.com>
1492 * config/tc-arm.h (MD_APPLY_SYM_VALUE): Pass the current segment
1493 to arm_apply_sym_value. Update prototype.
1494 * config/tc-arm.c (arm_apply_sym_value): Add segment argument.
1495 Do not apply the value if the symbol is in a different segment to
1496 the current segment.
1498 2015-03-11 Alan Modra <amodra@gmail.com>
1500 * config/tc-ppc.c (md_assemble): Don't abort on 8 byte insn fixups.
1501 (md_apply_fix): Report an error on data-only fixups used with insns.
1503 2015-03-10 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
1505 * config/tc-s390.c (md_gather_operands): Check for valid
1506 length field operands.
1508 2015-03-10 Michael Perkins <perkinsmg75@yahoo.co.uk>
1510 * config/tc-arm.c (parse_operands): Fix bug setting writeback
1511 values for '^' on OP_REGLSTs.
1512 (do_push_pop): Add new writeback constraint.
1514 2015-03-10 Renlin Li <renlin.li@arm.com>
1516 * config/tc-arm.c (mapping_state): Remove first MAP_DATA emitting code.
1517 (mapping_state_2): Emit first MAP_DATA symbol here.
1519 2015-03-10 Matthew Wahab <matthew.wahab@arm.com>
1521 * config/tc-aarch64.c (mapping_state): Set minimum alignment for
1524 2015-03-10 Nick Clifton <nickc@redhat.com>
1527 * config/tc-arm.c (md_begin): Ensure that selected_cpu is
1528 initialised when CPU_DEFAULT is defined.
1530 2015-03-05 Nick Clifton <nickc@redhat.com>
1532 * config/tc-v850.c (md_parse_option): Fix code to set or clear
1533 EF_RH850_DATA_ALIGN8 bit in ELF header, based upon the use of the
1534 -m8byte-align and -m4byte-align command line options.
1536 2015-03-04 Richard Sandiford <richard.sandiford@arm.com>
1539 * config/tc-aarch64.c (process_movw_reloc_info): Allow
1540 R_AARCH64_TLSLE_MOVW_TPREL_G0_NC and R_AARCH64_TLSLE_MOVW_TPREL_G1_NC
1543 2015-02-28 Alan Modra <amodra@gmail.com>
1545 * write.c (SUB_SEGMENT_ALIGN): Don't pad non-code sections at
1546 end to their alignment.
1548 2015-02-19 Marcus Shawcroft <marcus.shawcroft@arm.com>
1550 * config/tc-aarch64.c (reloc_table_entry): Generate
1551 BFD_RELOC_AARCH64_TLSDESC_ADR_PREL21.
1552 (md_apply_fix, aarch64_force_relocation): Handle
1553 BFD_RELOC_AARCH64_TLSGD_ADR_PREL21.
1555 2015-02-19 Marcus Shawcroft <marcus.shawcroft@arm.com>
1557 * config/tc-aarch64.c (reloc_table_entry): Generate
1558 BFD_RELOC_AARCH64_TLSGD_ADR_PREL21.
1559 (md_apply_fix, aarch64_force_relocation): Handle
1560 BFD_RELOC_AARCH64_TLSGD_ADR_PREL21.
1562 2015-02-19 Marcus Shawcroft <marcus.shawcroft@arm.com>
1564 * config/tc-aarch64.c (reloc_table_entry): Generate
1565 BFD_RELOC_AARCH64_TLSIE_LD_GOTTPREL_PREL19.
1566 (md_apply_fix, aarch64_force_relocation): Handle
1567 BFD_RELOC_AARCH64_TLSIE_LD_GOTTPREL_PREL19.
1569 2015-02-26 Marcus Shawcroft <marcus.shawcroft@arm.com>
1571 * config/tc-aarch64.c (reloc_table_entry): Add ld_literal_type.
1572 (reloc_table): Likewise.
1573 (parse_address_main): Use ld_literal_type.
1575 2015-02-26 Marcus Shawcroft <marcus.shawcroft@arm.com>
1577 * config/tc-aarch64.c (reloc_table_entry): Add adr_type.
1578 (reloc_table): Likewise.
1579 (parse_address_main): Use adr_type.
1581 2015-02-26 Marcus Shawcroft <marcus.shawcroft@arm.com>
1583 * config/tc-aarch64.c (aarch64_arch_any, aarch64_arch_node): Remove.
1585 2015-02-25 Andrew Burgess <andrew.burgess@embecosm.com>
1587 * config/tc-avr.c: Add elf32-avr.h include.
1588 (struct avr_property_record_link): New structure.
1589 (avr_output_property_section_header): New function.
1590 (avr_record_size): New function.
1591 (avr_output_property_record): New function.
1592 (avr_create_property_section): New function.
1593 (avr_handle_align): New function.
1594 (exclude_section_from_property_tables): New function.
1595 (create_record_for_frag): New function.
1596 (append_records_for_section): New function.
1597 (avr_create_and_fill_property_section): New function.
1598 (avr_post_relax_hook): New function.
1599 * config/tc-avr.h (md_post_relax_hook): Define.
1600 (avr_post_relax_hook): Declare.
1601 (HANDLE_ALIGN): Define.
1602 (avr_handle_align): Declare.
1603 (strut avr_frag_data): New structure.
1604 (TC_FRAG_TYPE): Define.
1606 2015-02-25 Matthew Wahab <matthew.wahab@arm.com>
1608 * doc/c-arm.texi (-mcpu=): Add cortex-a53, cortex-a57 and
1611 2015-02-24 Nick Clifton <nickc@redhat.com>
1613 * config/tc-v850.c (soft_float): New variable.
1614 (v850_data_8): New variable.
1615 (md_show_usage): Add -msoft-float/-mhard-float.
1616 (md_parse_option): Likewise.
1617 (md_begin): Set the default value of soft_float.
1618 (v850_md_end): New function. Creates a note section.
1619 * config/tc-v850.h (md_end): Define.
1620 * doc/c-v850.texi: Document -msoft-float/-mhard-float.
1622 2015-02-23 Yoshinori Sato <ysato@users.sourceforge.jp>
1624 * config/tc-h8300.c (line_separater_chars): Add a version for
1625 h8300-linux that includes a separator.
1626 (default_mach): New variable.
1628 (md_longopts): Add '--march' option.
1629 (md_parse_option): Parse the new option.
1630 * config/tc-h8300.h (TARGET_FORMAT): Add elf32-h8300-linux.
1631 * configure.tgt: Add h8300-*-linux
1632 * doc/c-h8300.texi: Document --march.
1634 2015-02-23 Nick Clifton <nickc@redhat.com>
1637 * dwarf2dbg.c (out_header): When generating dwarf sections use
1638 real symbols not temps for the start and end symbols.
1639 * config/tc-msp430.h (TC_FORCE_RELOCATION_SUB_SAME): Also prevent
1640 adjustments to relocations in debug sections.
1641 (TC_LINKRELAX_FIXUP): Likewise.
1643 2015-02-19 Alan Modra <amodra@gmail.com>
1645 * doc/as.texinfo (Local Symbol Names): Don't use ':' in pxref.
1646 * doc/c-i386.texi: Reorder i386-Bugs after i386-Arch.
1648 2015-02-11 Matthew Wahab <matthew.wahab@arm.com>
1650 * config/tc-aarch64.c (aarch64_cpus): Fix code formatting.
1652 2015-02-11 Matthew Wahab <matthew.wahab@arm.com>
1654 * config/tc-arm.c: Add support for Cortex-A72.
1656 2015-02-09 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
1658 * config/tc-arm.c (warn_deprecated_sp): Use as_tsktsk instead
1659 of as_warn for deprecation messages.
1660 (encode_arm_addr_mode_2): Likewise.
1661 (check_obsolete): Likewise.
1662 (do_rd_rm_rn): Likewise.
1663 (do_co_reg): Likewise.
1664 (do_setend): Likewise.
1665 (do_t_mov_cmp): Likewise.
1666 (do_neon_ldr_str): Likewise.
1667 (opcode_lookup): Likewise.
1668 (if_fsm_post_encode): Likewise.
1669 (md_assemble): Likewise.
1671 2015-02-06 Jan Beulich <jbeulich@suse.com>
1673 * dw2gencfi.c (select_cie_for_fde): Also bail on CFI_label.
1674 (cfi_change_reg_numbers): Also do nothing for CFI_label.
1675 (cfi_pseudo_table): Also handle .cfi_label when not supporting
1678 2015-02-05 Alan Modra <amodra@gmail.com>
1680 * config/tc-msp430.c (md_assemble): Correct size passed to
1681 extract_cmd. Remove index check.
1683 2015-02-04 Matthew Wahab <matthew.wahab@arm.com>
1685 * config/tc-aarch64.c (aarch64_cpus): Add support for Cortex-A72.
1686 * doc/c-aarch64.texi (-mcpu=): Add "cortex-a72".
1688 2015-02-04 Nick Clifton <nickc@redhat.com>
1690 * config/rl78-parse.y (addsubw): Fix encoding of [HL] variant of
1693 2015-02-03 Renlin Li <renlin.li@arm.com>
1695 * doc/c-aarch64.texi (.arch): Document the directive.
1696 (.arch_extension): Likewise.
1698 2015-02-03 Nick Clifton <nickc@redhat.com>
1700 * config/tc-rl78.h (TC_PARSE_CONS_EXPRESSION): Define.
1702 2015-01-28 James Bowman <james.bowman@ftdichip.com>
1704 * Makefile.am: Add FT32 files.
1705 * config/tc-ft32.c: New file.
1706 * config/tc-ft32.h: New file.
1707 * configure.tgt: Add FT32 support.
1708 * Makefile.in: Regenerate.
1709 * po/POTFILES.in: Regenerate.
1711 2015-01-27 Kuan-Lin Chen <kuanlinchentw@gmail.com>
1713 * config/tc-nds32.c (do_pseudo_la_internal): Limit the second argument
1714 of instruction la to a symbol.
1716 2015-01-27 Kuan-Lin Chen <kuanlinchentw@gmail.com>
1718 * config/tc-nds32.c (nds32_parse_name): Ignore when the input is
1721 2015-01-19 Alan Modra <amodra@gmail.com>
1723 * read.c (s_reloc): Match BFD_RELOC_NONE, BFD_RELOC{8,16,32,64}.
1724 * write.c (get_frag_for_reloc): Allow match just past end of frag.
1726 2015-01-16 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
1728 * config/tc-s390.c (struct pd_reg): Remove.
1729 (pre_defined_registers): Remove.
1730 (REG_NAME_CNT): Remove.
1731 (reg_name_search): Calculate the register number instead of doing
1733 (register_name, tc_s390_regname_to_dw2regnum): Adopt to the new
1734 reg_name_search signature.
1735 (s390_parse_cpu): Support the new arch string z13.
1736 (s390_insert_operand): Support for vector registers with the extra
1737 field for the fifth bit of each vector register operand.
1738 (md_gather_operand): Adjust to the new handling of optional
1741 * doc/as.texinfo: Document the z13 cpu string.
1743 2015-01-13 Matthew Wahab <matthew.wahab@arm.com>
1745 * config/tc-arm.c (parse_ifimm_zero): Accept #0x0 as a synonym for
1746 #0, restoring previous behaviour.
1748 2015-01-12 Jan Beulich <jbeulich@suse.com>
1750 * gas/dw2gencfi.c (cfi_add_label, dot_cfi_label): New.
1751 (cfi_pseudo_table): Add "cfi_label".
1752 (output_cfi_insn): Handle CFI_label.
1753 (select_cie_for_fde): Als terminate CIE when encountering
1755 * dw2gencfi.h (cfi_add_label): Declare.
1756 (struct cfi_insn_data): New member "sym_name".
1758 * read.c (read_symbol_name): Drop "static".
1759 * read.h (read_symbol_name): Declare.
1761 2015-01-12 Jan Beulich <jbeulich@suse.com>
1763 * gas/config/tc-arm.c (do_neon_shl_imm): Check immediate range.
1764 (do_neon_qshl_imm): Likewise.
1766 2015-01-12 Alan Modra <amodra@gmail.com>
1768 * read.c (s_altmacro, s_reloc): Make definition static.
1770 2015-01-10 Andrew Burgess <andrew.burgess@embecosm.com>
1772 * config/tc-avr.c (md_apply_fix): Update the contents of VALP for
1775 2015-01-09 Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
1777 * config/tc-arm.c (arm_cpus): Add support for APM X-Gene 1 and
1779 * doc/c-arm.texi (ARM Options): Mention xgene1 and xgene2.
1781 2015-01-07 Jan Beulich <jbeulich@suse.com>
1783 * config/tc-arm.c (struct arm_option_extension_value_table):
1784 Split field "value" into fields "merge_value" and "clear_value".
1785 (arm_extensions): Adjust initializer accordingly.
1787 2015-01-01 Alan Modra <amodra@gmail.com>
1789 * as.c (parse_args): Just print current year.
1791 2015-01-01 Alan Modra <amodra@gmail.com>
1793 Update year range in copyright notice of all files.
1795 For older changes see ChangeLog-2014
1797 Copyright (C) 2015 Free Software Foundation, Inc.
1799 Copying and distribution of this file, with or without modification,
1800 are permitted in any medium without royalty provided the copyright
1801 notice and this notice are preserved.
1807 version-control: never