gas/ChangeLog

   1 2007-05-18  Joseph Myers  <joseph@codesourcery.com>
   2
   3         * config/tc-mips.c (s_mipsset): Use generic s_set for directives
   4         containing a comma.
   5
   6 2007-05-17  H.J. Lu  <hongjiu.lu@intel.com>
   7
   8         PR gas/4517
   9         2003-06-05  Michal Ludvig  <mludvig@suse.cz>
  10         * doc/as.texinfo: Document new directives: .cfi_restore,
  11         .cfi_undefined, .cfi_same_value, .cfi_return_column,
  12         .cfi_remember_state and .cfi_restore_state.
  13
  14 2007-05-17  Nathan Sidwell  <nathan@codesourcery.com>
  15
  16         * config/tc-m68k.c (md_apply_fix): Show value of out of range
  17         fixups in error message.
  18         (md_conver_frag_1): Propagate the fix source location and use
  19         as_bad_where rather than fatal, for better error messages.
  20
  21 2007-05-16  Paul Brook  <paul@codesourcery.com>
  22
  23         * config/tc-arm.c (v7m_psrs): Add uppercase PSR names and xpsr.
  24
  25 2007-05-15  Mark Shinwell  <shinwell@codesourcery.com>
  26
  27         * app.c (do_scrub_chars): Don't damage \@ pseudo-variables.
  28
  29 2007-05-15  Vincent Riviere  <vincent.riviere@freesbee.fr>
  30
  31         PR gas/3041
  32         * config/tc-m68k.c (relaxable_symbol): Make sure that the correct
  33         addend is stored for relocs against weak symbols.
  34         (md_apply_fix): So not loose track of addend for relocs against
  35         weak symbols.
  36
  37 2007-05-14  Thiemo Seufer  <ths@mips.com>
  38
  39         * config/tc-mips.c (md_parse_option): Fix parsing of -O option.
  40
  41 2007-05-14  Mei Ligang  <ligang@sunnorth.com.cn>
  42
  43         * config/tc-score.c (data_op2, validate_immediate): Fix bug for
  44         addri, addri.c, subi, and subi.c when immediate number is hex.
  45         (score_insns): Remove subis and subis.c.
  46         (do_sub_rdi16): Delete.
  47
  48 2007-05-11  Alan Modra  <amodra@bigpond.net.au>
  49
  50         * config/tc-spu.c (md_pseudo_table): Add int, long, quad.  Call
  51         spu_cons for word.
  52         (md_assemble): Tidy use of insn.flag.
  53         (get_imm): Likewise.  Handle uppercase input too.
  54         (spu_cons): New function.
  55         * config/tc-spu.h (tc_fix_adjustable): Don't adjust SPU_PPU relocs.
  56         (TC_FORCE_RELOCATION): Don't resolve them either.
  57
  58 2007-05-05  Mark Shinwell  <shinwell@codesourcery.com>
  59
  60         * config/tc-arm.c (md_apply_fix): Generate more accurate
  61         diagnostic when 8-bit immediate range is exceeded for
  62         BFD_RELOC_ARM_OFFSET_IMM8.
  63
  64 2007-05-04  Alan Modra  <amodra@bigpond.net.au>
  65
  66         PR gas/4460
  67         * config/tc-i386.c (lex_got): Don't replace the reloc token with
  68         a space if we already have a space.
  69
  70 2007-05-03  H.J. Lu  <hongjiu.lu@intel.com>
  71
  72         * config/tc-i386.c (match_template): Don't explicitly check
  73         suffix for crc32 in Intel mode.
  74         (process_suffix): Issue an error for crc32 if the operand size
  75         is ambiguous.
  76
  77 2007-05-03  Vincent Riviere  <vincent.riviere@freesbee.fr>
  78             Nick Clifton  <nickc@redhat.com>
  79
  80         PR gas/3041
  81         * config/tc-m68k.c (relaxable_symbol): Do not relax weak symbols.
  82         (tc_gen_reloc): Adjust the addend of relocs against weak symbols.
  83         (md_apply_fix): Put zero values into the frags referencing weak
  84         symbols.
  85
  86 2007-05-02  Alan Modra  <amodra@bigpond.net.au>
  87
  88         PR 4448
  89         * config/tc-ppc.c (ppc_insert_operand): Don't increase min for
  90         PPC_OPERAND_PLUS1.
  91
  92 2007-05-01  H.J. Lu  <hongjiu.lu@intel.com>
  93
  94         * config/tc-i386.c (match_template): Check suffix for crc32 in
  95         Intel mdoe.
  96         (process_suffix): Default the suffix of 8bit crc32 to
  97         BYTE_MNEM_SUFFIX.
  98         (check_byte_reg): Skip check for 8bit crc32.
  99
 100 2007-04-30  H.J. Lu  <hongjiu.lu@intel.com>
 101
 102         * config/tc-i386.c (md_assemble): Use register_prefix in
 103         error/warning message.
 104         (check_byte_reg): Likewise.
 105         (check_long_reg): Likewise.
 106         (check_qword_reg): Likewise.
 107         (check_word_reg): Likewise.
 108         (process_operands): Likewise.
 109
 110 2007-04-30  Alan Modra  <amodra@bigpond.net.au>
 111
 112         PR 4436
 113         * config/tc-ppc.c (ppc_insert_operand): Disable range check if
 114         min > max.
 115
 116 2007-04-28  Thiemo Seufer  <ths@networkno.de>
 117
 118         * config/tc-mips.c: Fix comment.
 119
 120 2007-04-26  Anatoly Sokolov <aesok@post.ru>
 121
 122         * config/tc-avr.c (mcu_types): Add support for atmega8hva and
 123         atmega16hva devices. Move at90usb82 device to 'avr5' architecture.
 124         * doc/c-avr.texi: Document new devices.
 125
 126 2007-04-24  Alan Modra  <amodra@bigpond.net.au>
 127
 128         * Makefile.am: Run "make dep-am".
 129         * Makefile.in: Regenerate.
 130
 131 2007-04-23  Nathan Sidwell  <nathan@codesourcery.com>
 132
 133         * config/tc-m68k.c (mcf54455_ctrl): New.
 134         (HAVE_LONG_DISP, HAVE_LONG_CALL, HAVE_LONG_COND): New.
 135         (m68k_archs): Add isac.
 136         (m68k_cpus): Add 54455 family.
 137         (m68k_ip): Split Bg into Bb, Bs, Bg.
 138         (m68k_elf_final_processing): Add ISA_C.
 139         * doc/c-m68k.texi (M680x0 Options): Add isac.
 140
 141 2007-04-22  Alan Modra  <amodra@bigpond.net.au>
 142
 143         * read.c (read_a_source_file): Skip multiple spaces to
 144         cover hack in mmix md_start_line_hook which overwrites a
 145         colon with a space.  Delete sermon and needless assertion.
 146
 147 2007-04-21  Alan Modra  <amodra@bigpond.net.au>
 148
 149         * config/atof-vax.c (atof_vax_sizeof): Change return type to unsigned.
 150         (md_atof): Make number_of_chars unsigned.  Revert last change.
 151         * config/tc-or32.c (md_apply_fix): Delete bogus assertions.
 152         * config/tc-sh.c (sh_optimize_expr): Only define for OBJ_ELF.
 153         * config/tc-sh.h (md_optimize_expr): Likewise.
 154         * config/tc-sh64.c (shmedia_md_pcrel_from_section): Delete bogus
 155         assertion.
 156         * config/tc-xtensa.c (convert_frag_immed_finish_loop): Likewise.
 157
 158 2007-04-21  Nick Clifton  <nickc@redhat.com>
 159
 160         * config/atof-vax.c (md_atof): Fix comparison inside know().
 161
 162         * config/tc-ia64.c (emit_one_bundle): Fix typo.
 163
 164 2007-04-21  Alan Modra  <amodra@bigpond.net.au>
 165
 166         * expr.c (expr): Assert on rankarg, not rank which can be unsigned.
 167         * read.c (read_a_source_file): Remove buffer_limit[-1] assertion.
 168         Don't skip over NUL char.
 169         (pseudo_set): Set X_op for registers to O_register.
 170         * symbols.c (symbol_clone): Remove assertion that sym is defined.
 171         (resolve_symbol_value): Resolve O_register symbols.
 172         * config/tc-i386.c (parse_real_register): Don't use i386_float_regtab.
 173         Instead find st(0) by hash lookup.
 174         * config/tc-ppc.c (ppc_macro): Warning fix.
 175
 176         * as.h (ENABLE_CHECKING): Default define to 0.
 177         (know): Assert if ENABLE_CHECKING.
 178         (struct relax_type): Remove superfluous declaration.
 179         * configure.in (--enable-checking): New.
 180         * configure: Regenerate.
 181         * config.in: Regenerate.
 182         * config/tc-ppc.c (ppc_setup_opcodes): Do checks when ENABLE_CHECKING.
 183         Check for duplicate powerpc_operands entries.
 184
 185 2007-04-20  Nathan Sidwell  <nathan@codesourcery.com>
 186
 187         * config/tc-m68k.c (mcf5253_ctrl): New.
 188         (mcf52223_ctrl): New.
 189         (m68k_cpus): Add 5253, 52221, 52223.
 190
 191         * config/m68k-parse.h (RAMBAR_ALT): New.
 192         * config/tc-m68k.c (mcf5206_ctrl, mcf5307_ctrl): New.
 193         (mcf_ctrl, mcf5208_ctrl, mcf5210a_ctrl, mcf5213_ctrl, mcf52235_ctrl,
 194         mcf5225_ctrl, mcf5235_ctrl, mcf5271_ctrl, mcf5275_ctrl,
 195         mcf5282_ctrl, mcf5329_ctrl, mcf5373_ctrl, mcfv4e_ctrl,
 196         mcf5475_ctrl, mcf5485_ctrl): Add RAMBAR synonym for
 197         RAMBAR1.
 198         (mcf5272_ctrl): Add RAMBAR0, replace add RAMBAR with RAMBAR_ALT.
 199         (m68k_cpus): Adjust 5206, 5206e & 5307 entries.
 200         (m68k_ip) <Case J>: Detect when RAMBAR_ALT should be used.  Add it
 201         to control register mapping.
 202
 203 2007-04-20  Alan Modra  <amodra@bigpond.net.au>
 204
 205         * messages.c (as_internal_value_out_of_range): Fix typo in
 206         error message.  Return after printing domain error.
 207         * config/tc-ppc.c (ppc_insert_operand): Preserve low zero bits
 208         in max when shifting right.
 209
 210 2007-04-20  Alan Modra  <amodra@bigpond.net.au>
 211
 212         * messages.c (as_internal_value_out_of_range): Extend to report
 213         errors for values with invalid low bits set.
 214         * config/tc-ppc.c (ppc_setup_opcodes): Check powerpc_operands bitm
 215         fields.  Check that operands and opcode fields are disjoint.
 216         (ppc_insert_operand): Check operands using mask rather than bit
 217         count.   Check low bits too.  Handle PPC_OPERAND_PLUS1.  Adjust
 218         insertion code.
 219         (md_apply_fix): Adjust for struct powerpc_operand change.
 220
 221 2007-04-19  Paul Brook  <paul@codesourcery.com>
 222
 223         * config/tc-arm.c (md_assemble): Only allow 16-bit instructions on
 224         Thumb-1.  Add sanity check for bogus relaxations.
 225
 226 2007-04-19  Paul Brook  <paul@codesourcery.com>
 227
 228         * config/tc-arm.c (insns): Allow rsb and rsbs on Thumb-1.
 229
 230 2007-04-19  Alan Modra  <amodra@bigpond.net.au>
 231
 232         * Makefile.am: Run "make dep-am".
 233         * Makefile.in: Regenerate.
 234
 235 2007-04-19  Nathan Froyd <froydnj@codesourcery.com>
 236
 237         * doc/c-ppc.texi (PowerPC-Opts): Document -me500, -me500x2, -mspe.
 238
 239 2007-04-18  H.J. Lu <hongjiu.lu@intel.com>
 240
 241         * doc/c-i386.texi; Document .ssse3, .sse4.1, .sse4.2 and .sse4.
 242
 243 2007-04-18  H.J. Lu <hongjiu.lu@intel.com>
 244
 245         * config/tc-i386.c (cpu_arch): Add .sse4.2 and .sse4.
 246         (match_template): Handle operand size for crc32 in SSE4.2.
 247         (process_suffix): Handle operand type for crc32 in SSE4.2.
 248         (output_insn): Support SSE4.2.
 249
 250 2007-04-18  H.J. Lu <hongjiu.lu@intel.com>
 251
 252         * config/tc-i386.c (cpu_arch): Add .sse4.1.
 253         (process_operands): Adjust implicit operand for blendvpd,
 254         blendvps and pblendvb in SSE4.1.
 255         (output_insn): Support SSE4.1.
 256
 257 2007-04-18  Paul Brook  <paul@codesourcery.com>
 258
 259         * config/tc-arm.c (do_t_rsb): Use 16-bit encoding when possible.
 260
 261 2007-04-16  Kaz Kojima  <kkojima@rr.iij4u.or.jp>
 262
 263         * config/tc-sh.c (sh_handle_align):  Call as_bad_where instead
 264         of as_warn_where for misaligned data.
 265
 266 2007-04-15  Kaz Kojima  <kkojima@rr.iij4u.or.jp>
 267
 268         * config/tc-sh.c (align_test_frag_offset_fixed_p): Handle
 269         rs_fill frags.
 270
 271 2007-04-14  Steve Ellcey  <sje@cup.hp.com>
 272
 273         * Makefile.am: Add ACLOCAL_AMFLAGS.
 274         * Makefile.in: Regenerate.
 275
 276 2007-04-14  Kaz Kojima  <kkojima@rr.iij4u.or.jp>
 277
 278         * config/tc-sh.c (align_test_frag_offset_fixed_p): New.
 279         (sh_optimize_expr): Likewise.
 280         * config/tc-sh.h (md_optimize_expr): Define.
 281         (sh_optimize_expr): Prototype.
 282
 283 2007-04-06  Matt Thomas  <matt@netbsd.org>
 284
 285         * config/tc-vax.c (vax_cons): Added to support %pcrel{8,16,32}(exp)
 286         to emit pcrel relocations by DWARF2 in non-code sections.  Borrowed
 287         heavily from tc-sparc.c.  (vax_cons_fix_new): Likewise.
 288
 289 2007-04-04  Kazu Hirata  <kazu@codesourcery.com>
 290
 291         * config/tc-m68k.c (HAVE_LONG_BRANCH): Add fido_a.
 292
 293 2007-04-04  Paul Brook  <paul@codesourcery.com>
 294
 295         * config/tc-arm.c (do_neon_ext): Enforce immediate range.
 296         (insns): Use I15 for vext.
 297
 298 2007-04-04  Paul Brook  <paul@codesourcery.com>
 299
 300         * configure.tgt: Loosen checks for arm uclinux eabi targets.
 301
 302 2007-04-02  Sterling Augustine  <sterling@tensilica.com>
 303
 304         * config/tc-xtensa.c (xtensa_flush_pending_output): Check
 305         outputting_stabs_line_debug.
 306
 307 2007-03-26  Anatoly Sokolov <aesok@post.ru>
 308
 309         * config/tc-avr.c (mcu_types): Add support for at90pwm1, at90usb82,
 310         at90usb162, atmega325p, atmega329p, atmega3250p and atmega3290p
 311         devices.
 312         * doc/c-avr.texi: Document new devices.
 313
 314 2007-04-02  Richard Sandiford  <richard@codesourcery.com>
 315
 316         * doc/as.texinfo: Add -mvxworks-pic to the list of MIPS options.
 317         * doc/c-mips.texi (-KPIC, -mvxworks-pic): Document.
 318         * config/tc-mips.c (md_show_usage): Mention -mvxworks-pic.
 319
 320 2007-03-30  Sterling Augustine  <sterling@tensilica.com>
 321             Bob Wilson  <bob.wilson@acm.org>
 322
 323         * config/tc-xtensa.c (xtensa_move_labels): Remove loops_ok argument.
 324         Do not check is_loop_target flag.
 325         (xtensa_frob_label): Adjust calls to xtensa_move_labels.
 326         (xg_assemble_vliw_tokens): Likewise.  Also avoid calling
 327         xtensa_move_labels for alignment of loop opcodes.
 328
 329 2007-03-30  H.J. Lu  <hongjiu.lu@intel.com>
 330
 331         * config/tc-i386.c (process_suffix): Reindent a bit.
 332
 333 2007-03-30  Paul Brook  <paul@codesourcery.com>
 334
 335         * config/tc-arm.c (encode_thumb2_ldmstm): New function.
 336         (do_t_ldmstm): Generate 16-bit push/pop.  Use encode_thumb2_ldmstm.
 337         (do_t_push_pop):  Use encode_thumb2_ldmstm.
 338
 339 2007-03-29  DJ Delorie  <dj@redhat.com>
 340
 341         * config/tc-m32c.c (rl_for, relaxable): Protect argument.
 342         (md_relax_table): Add entries for ADJNZ macros.
 343         (M32C_Macros): Add ADJNZ macros.
 344         (subtype_mappings): Add entries for ADJNZ macros.
 345         (insn_to_subtype): Check for adjnz and sbjnz insns.
 346         (md_estimate_size_before_relax): Pass insn to insn_to_subtype.
 347         (md_convert_frag): Convert adjnz and sbjnz.
 348
 349 2007-03-29  Nick Clifton  <nickc@redhat.com>
 350
 351         * itbl-ops.c (itbl_entry): Remove unnecessary and excessively long
 352         initialization.
 353         * itbl-ops.h (enum e_processor): Initialise the e_nprocs field
 354         using ITBL_NUMBER_OF_PROCESSORS.
 355         * itbl-parse.y (yyerror): Remove use of redundant macro PARAMS.
 356
 357 2007-03-28  H.J. Lu  <hongjiu.lu@intel.com>
 358
 359         * config/tc-i386.c (build_modrm_byte): For instructions with 2
 360         register operands, encode destination in i.rm.regmem if its
 361         RegMem bit is set.
 362
 363 2007-03-28  Richard Sandiford  <richard@codesourcery.com>
 364             Phil Edwards  <phil@codesourcery.com>
 365
 366         * doc/as.texinfo: Put the contents after the title page rather
 367         than at the end of the document.
 368
 369 2007-03-27  Alan Modra  <amodra@bigpond.net.au>
 370
 371         * NEWS: Mention ".reloc".
 372
 373 2007-03-26  Sterling Augustine  <sterling@tensilica.com>
 374
 375         * config/tc-xtensa.c (xg_translate_idioms): Allow assembly idioms
 376         in FLIX instructions.
 377
 378 2007-03-26  Julian Brown  <julian@codesourcery.com>
 379
 380         * config/tc-arm.c (arm_it): Add immisfloat field.
 381         (parse_qfloat_immediate): Disallow integer syntax for floating-point
 382         immediates. Fix hex immediates, handle 0.0 and -0.0 specially.
 383         (parse_neon_mov): Set immisfloat bit for operand if it parsed as a
 384         float.
 385         (neon_cmode_for_move_imm): Reject non-float immediates for float
 386         operands.
 387         (neon_move_immediate): Pass immisfloat bit to neon_cmode_for_move_imm.
 388
 389 2007-03-26  Julian Brown  <julian@codesourcery.com>
 390
 391         * doc/c-arm.texi: Add documentation for .dn/.qn directives.
 392
 393 2007-03-26  Alan Modra  <amodra@bigpond.net.au>
 394
 395         * doc/as.texinfo (Reloc): Document.
 396         * read.c (potable): Add "reloc".
 397         (s_reloc): New function.
 398         * write.c (reloc_list): New global var.
 399         (resolve_reloc_expr_symbols): New function.
 400         (write_object_file): Call it.
 401         (write_relocs): Process reloc_list.
 402         * write.h (struct reloc_list): New.
 403         (reloc_list): Declare.
 404
 405 2007-03-24  Paul Brook  <paul@codesourcery.com>
 406
 407         * config/tc-arm.c (do_t_ldmstm): Error on Thumb-2 addressing modes.
 408
 409 2007-03-24  Paul Brook  <paul@codesourcery.com>
 410         Mark Shinwell  <shinwell@codesourcery.com>
 411
 412         * config/tc-arm.c (operand_parse_code): Add OP_oRRw.
 413         (parse_operands): Don't expect comma if first operand missing.
 414         Handle OP_oRRw.
 415         (do_srs): Encode register number, checking it is r13.  Update comment.
 416         (insns): Update SRS entries to take a register.
 417
 418 2007-03-23  H.J. Lu  <hongjiu.lu@intel.com>
 419
 420         * config/tc-i386.c (md_begin): Allow '.' in mnemonic.
 421
 422 2007-03-23  Mark Shinwell  <shinwell@codesourcery.com>
 423
 424         * config/tc-arm.c (md_apply_fix): Turn CBZ instructions that
 425         attempt to jump to the next instruction into NOPs.
 426
 427 2007-03-23  Alan Modra  <amodra@bigpond.net.au>
 428
 429         * config/tc-spu.c: Don't include opcode/spu.h.
 430         (md_assemble): Set tc_fix_data.insn_tag and arg_format.
 431         (md_apply_fix): Adjust.
 432         * config/tc-spu.h: Include opcode/spu.h.
 433         (struct tc_fix_info): New.
 434         (TC_FIX_TYPE, TC_INIT_FIX_DATA): Adjust.
 435         (TC_FORCE_RELOCATION): Define.
 436
 437 2007-03-22  Joseph Myers  <joseph@codesourcery.com>
 438
 439         * doc/as.texinfo: Include VERSION_PACKAGE when reporting version.
 440
 441 2007-03-21  H.J. Lu  <hongjiu.lu@intel.com>
 442
 443         * config/tc-i386.c (process_suffix): Check 0x90 instead of
 444         xchg for xchg %rax,%rax.
 445
 446 2007-03-21  H.J. Lu  <hongjiu.lu@intel.com>
 447
 448         * config/tc-i386.c: Replace REX_MODE64, REX_EXTX, REX_EXTY
 449         and REX_EXTZ with REX_W, REX_R, REX_X and REX_B respectively.
 450
 451 2007-03-21  H.J. Lu  <hongjiu.lu@intel.com>
 452
 453         PR binutils/4218
 454         * config/tc-i386.c (match_template): Properly handle 64bit mode
 455         "xchg %eax, %eax".
 456
 457 2007-03-21  Anton Ertl  <anton@mips.complang.tuw>
 458
 459         PR gas/4124
 460         * config/tc-alpha.c (emit_ustX): Fix ustq code generation.
 461
 462 2007-03-21  H.J. Lu  <hongjiu.lu@intel.com>
 463
 464         * Makefile.am: Run dep-am.
 465         * Makefile.in: Regenerated.
 466
 467         * config/tc-i386.c: Don't include "opcodes/i386-opc.h".
 468
 469         * config/tc-i386.h: Include "opcodes/i386-opc.h".
 470         (NOP_OPCODE): Removed.
 471         (template): Likewise.
 472
 473 2007-03-21  Andreas Schwab  <schwab@suse.de>
 474
 475         * config/tc-i386.h (NOP_OPCODE): Restore.
 476
 477 2007-03-18  Mark Shinwell  <shinwell@codesourcery.com>
 478
 479         * config/tc-arm.c (do_mul): Don't warn about overlapping
 480         Rd and Rm operands when assembling for v6 or above.
 481         Correctly capitalize register names in the messages.
 482         (do_mlas): Likewise.  Delete spurious blank line.
 483
 484 2007-03-16  Kazu Hirata  <kazu@codesourcery.com>
 485
 486         * config/tc-m68k.c (m68k_cpus): Add an entry for fidoa.
 487
 488 2007-03-15  H.J. Lu  <hongjiu.lu@intel.com>
 489
 490         * config/tc-i386.c (md_begin): Use i386_regtab_size to scan
 491         i386_regtab.
 492         (parse_register): Use i386_regtab_size instead of ARRAY_SIZE
 493         on i386_regtab.
 494
 495 2007-03-15  Alexandre Oliva  <aoliva@redhat.com>
 496
 497         PR gas/4184
 498         * app.c (do_scrub_chars): PUT after setting states.
 499
 500 2007-03-15  H.J. Lu  <hongjiu.lu@intel.com>
 501
 502         * Makefile.am: Run "make dep-am".
 503         * Makefile.in: Regenerated.
 504
 505         * config/tc-i386.c: Include "opcodes/i386-opc.h" instead of
 506         "opcode/i386.h".
 507         (md_begin): Check reg_name != NULL for the last entry in
 508         i386_regtab.
 509
 510         * config/tc-i386.h: Move many entries to opcode/i386.h and
 511         opcodes/i386-opc.h.
 512
 513         * configure.in (need_opcodes): Set true for i386.
 514         * configure: Regenerated.
 515
 516 2007-03-15  H.J. Lu  <hongjiu.lu@intel.com>
 517
 518         * Makefile.am (REPORT_BUGS_TO): Removed.
 519         (INCLUDES): Remove -DREPORT_BUGS_TO.
 520         * Makefile.in: Regenerated.
 521
 522         * configure.in (--with-bugurl): Removed.
 523         * configure: Regenerated.
 524
 525         * doc/Makefile.am (as_TEXINFOS): Remove gasver.texi.
 526         (AM_MAKEINFOFLAGS): Add -I ../../bfd/doc.
 527         (TEXI2DVI): Likewise.
 528         (gasver.texi): Removed.
 529         (MOSTLYCLEANFILES): Remove gasver.texi.
 530         (as.1): Don't depend on gasver.texi.
 531         * doc/Makefile.in: Regenerated.
 532
 533         * doc/as.texi: Include bfdver.texi instead of gasver.texi.
 534
 535 2007-03-14  Daniel Jacobowitz  <dan@codesourcery.com>
 536
 537         * config/tc-arm.c (arm_copy_symbol_attributes): New.
 538         * config/tc-arm.h (arm_copy_symbol_attributes): Declare.
 539         (TC_COPY_SYMBOL_ATTRIBUTES): Define.
 540         * gas/symbols.c (copy_symbol_attributes): Use
 541         TC_COPY_SYMBOL_ATTRIBUTES.
 542
 543 2007-03-14  Paul Brook  <paul@codesourcery.com>
 544
 545         * config/tc-arm.c (T16_32_TAB): Fix dec_sp encoding.
 546
 547 2007-03-14  Alan Modra  <amodra@bigpond.net.au>
 548
 549         PR 4029
 550         * write.c (relax_segment): Insert extra alignment padding
 551         to break infinite relax loop when given impossible
 552         gcc_except_table assembly.
 553
 554 2007-03-12  H.J. Lu  <hongjiu.lu@intel.com>
 555
 556         * config/tc-i386.c (md_assemble): Use Opcode_XXX instead of XXX
 557         on i.tm.base_opcode.
 558         (match_template): Likewise.
 559         (process_operands): Use ~0x3 mask to match MOV_AX_DISP32.
 560
 561         * config/tc-i386.h (Opcode_D): New.
 562         (Opcode_FloatR): Likewise.
 563         (Opcode_FloatD): Likewise.
 564         (D): Redefined.
 565         (W): Likewise.
 566         (FloatMF): Likewise.
 567         (FloatR): Likewise.
 568         (FloatD): Likewise.
 569
 570 2007-03-09  Alexandre Oliva  <aoliva@redhat.com>
 571
 572         * app.c (do_scrub_chars): Recognize comments after # line "file".
 573         * read.c (get_linefile_number): New.
 574         (s_app_line): Accept ill-formed .linefile lines as comments.
 575
 576 2007-03-09  Alan Modra  <amodra@bigpond.net.au>
 577
 578         * config/tc-i386.h (WORKING_DOT_WORD): Define.
 579
 580 2007-03-09  Alexandre Oliva  <aoliva@redhat.com>
 581
 582         * app.c (do_scrub_chars): Turn #<line>"file"flags into .linefile.
 583         * as.h (new_logical_line_flags): New.
 584         * input-scrub.c (new_logical_line): Turned into wrapper for...
 585         (new_logical_line_flags): this.  Handle flags.
 586         * read.c (potable): Add linefile.  Adjust appline argument.
 587         (s_app_file): Fake .appfiles no more.
 588         (s_app_line): For .linefile, accept file name and flags.
 589
 590 2007-03-08  Alan Modra  <amodra@bigpond.net.au>
 591
 592         * symbols.c (symbol_relc_make_sym): Comment typo fixes.
 593
 594 2007-03-08  Alan Modra  <amodra@bigpond.net.au>
 595
 596         * Makefile.am: Run "make dep-am".
 597         * Makefile.in: Regenerate.
 598         * po/POTFILES.in: Regenerate.
 599
 600 2007-03-07  Joseph Myers  <joseph@codesourcery.com>
 601
 602         * configure.in (REPORT_BUGS_TEXI): Define to Texinfo version of
 603         bug-reporting URL.
 604         * doc/Makefile.am (gasver.texi): Define BUGURL.
 605         * doc/as.texinfo: Use BUGURL.
 606         * Makefile.in, configure, doc/Makefile.in: Regenerate.
 607
 608 2007-03-06  Andreas Krebbel  <krebbel1@de.ibm.com>
 609
 610         * config/tc-s390.c (md_parse_option): z9-ec option added.
 611
 612 2007-03-02  Paul Brook  <paul@codesourcery.com>
 613
 614         * config/tc-arm.c (relax_immediate): Always return positive values.
 615         (relaxed_symbol_addr): New function.
 616         (relax_adr, relax_branch): Use it.
 617         (arm_relax_frag): Pass strect argument.  Adjust infinite loop check.
 618
 619 2007-03-01  Joseph Myers  <joseph@codesourcery.com>
 620
 621         * as.c (parse_args): Update copyright date.
 622
 623 2007-02-28  Nathan Sidwell  <nathan@codesourcery.com>
 624
 625         * configure.tgt (sh-*-uclinux, sh[12]-*-uclinux): Specify as elf.
 626
 627 2007-02-28  Nick Clifton  <nickc@redhat.com>
 628
 629         PR gas/3797
 630         * config/tc-d10v.c (do_assemble): Do not generate error messages,
 631         just return -1 whenever a problem is encountered.
 632         (md_assemble): If do_assemble returns -1 generate a non-fatal
 633         error message and return.
 634
 635         PR gas/2623
 636         * config/tc-msp430.c (line_separator_char): Change to '{'.
 637
 638 2007-02-27  Alan Modra  <amodra@bigpond.net.au>
 639
 640         * config/tc-m68hc11.c (fixup24): Correct fixup size.
 641         (build_jump_insn): Likewise.
 642         (build_insn): Likewise.
 643         (s_m68hc11_relax): Likewise.
 644
 645 2007-02-27  Alan Modra  <amodra@bigpond.net.au>
 646
 647         * config/obj-elf.c (elf_frob_file): frag_wane any new frags.
 648
 649 2007-02-25  Mark Shinwell  <shinwell@codesourcery.com>
 650
 651         * config/tc-arm.c (do_vfp_nsyn_pop): Use fldmias/fldmiad.
 652
 653 2007-02-23  Alan Modra  <amodra@bigpond.net.au>
 654
 655         * config/tc-mn10300.c (md_convert_frag): Correct fixup size.
 656         (md_assemble): Likewise.
 657
 658 2007-02-22  Alan Modra  <amodra@bigpond.net.au>
 659
 660         * write.c (size_seg): Always clear SEC_RELOC here.
 661         (install_reloc): New function, extracted from..
 662         (write_relocs): ..here.  Combine RELOC_EXPANSION_POSSIBLE code
 663         with !RELOC_EXPANSION_POSSIBLE code.  Don't add fr_offset when
 664         testing frag size.  Set SEC_RELOC here.
 665
 666 2007-02-21  Alan Modra  <amodra@bigpond.net.au>
 667
 668         PR 4082
 669         * config/tc-avr.h (TC_FX_SIZE_SLACK): Define.
 670
 671 2007-02-20  Thiemo Seufer  <ths@mips.com>
 672
 673         * doc/c-mips.texi: Document 74kc, 74kf, 74kx.
 674
 675 2007-02-20  Thiemo Seufer  <ths@mips.com>
 676
 677         * config/tc-mips.c (mips_cpu_info_table): Add 74K configurations.
 678
 679 2007-02-20  Thiemo Seufer  <ths@mips.com>
 680             Chao-Ying Fu  <fu@mips.com>
 681
 682         * config/tc-mips.c (mips_set_options, mips_opts, file_ase_dspr2,
 683         ISA_SUPPORTS_DSPR2_ASE, MIPS_CPU_ASE_DSPR2): Add DSP R2 ASE support.
 684         (macro_build): Add case '2'.
 685         (macro): Expand M_BALIGN to nop, packrl.ph or balign.
 686         (validate_mips_insn): Add support for balign instruction.
 687         (mips_ip): Handle DSP R2 instructions. Support balign instruction.
 688         (OPTION_DSPR2, OPTION_NO_DSPR2, OPTION_COMPAT_ARCH_BASE,
 689         md_parse_option, mips_after_parse_args): Add -mdspr2 and -mno-dspr2
 690         command line options.
 691         (s_mipsset): Add support for .set dspr2 and .set nodspr2 directives.
 692         (md_show_usage): Add -mdspr2 and -mno-dspr2 help output.
 693         * doc/c-mips.texi, doc/as.texinfo: Document -mdspr2, -mno-dspr2,
 694         .set dspr2, .set nodspr2.
 695
 696 2007-02-20  Nathan Sidwell  <nathan@codesourcery.com>
 697
 698         * config/tc-m68k.c (mcf5210a_ctrl, mcf52235_ctrl, mcf5225_ctrl): New.
 699         (m68k_cpus): Add 5210a..5211a, 52230..52235 5224..5225.
 700
 701 2007-02-18  Alan Modra  <amodra@bigpond.net.au>
 702
 703         * write.c (TC_FX_SIZE_SLACK): Define.
 704         (write_relocs): Reinstate check for fixup within frag.
 705         * config/tc-bfin.h (TC_FX_SIZE_SLACK): Define.
 706         * config/tc-h8300.h (TC_FX_SIZE_SLACK): Define.
 707         * config/tc-mmix.h (TC_FX_SIZE_SLACK): Define.
 708         * config/tc-sh.h (TC_FX_SIZE_SLACK): Define.
 709         * config/tc-xstormy16.h (TC_FX_SIZE_SLACK): Define.
 710
 711 2007-02-17  Mark Mitchell  <mark@codesourcery.com>
 712             Nathan Sidwell  <nathan@codesourcery.com>
 713             Vladimir Prus  <vladimir@codesourcery.com
 714             Joseph Myers  <joseph@codesourcery.com>
 715
 716         * configure.in (--with-bugurl): New option.
 717         * configure: Regenerate.
 718         * dep-in.sed: Remove bin-bugs.h.
 719         * Makefile.am (REPORT_BUGS_TO): Define.
 720         (INCLUDES): Define REPORT_BUGS_TO.
 721         (DEP_INCLUDES): Likewise.
 722         ($(OBJS)): No longer depend on bin-bugs.h.
 723         * Makefile.in: Regenerate.
 724         * doc/Makefile.in: Regenerate.
 725         * as.c (show_usage): Don't print empty REPORT_BUGS_TO.
 726         * as.h: Remove include of bin-bugs.h.
 727
 728 2007-02-17  Alan Modra  <amodra@bigpond.net.au>
 729
 730         * write.c: White space fixes.
 731         (fixup_segment): Move symbol_mri_common_p adjustments..
 732         (write_relocs): ..and symbol_equated_reloc_p adjustments..
 733         (adjust_reloc_syms): ..to here.
 734
 735 2007-02-16  Alan Modra  <amodra@bigpond.net.au>
 736
 737         * subsegs.c (subseg_change, subseg_get): Use xcalloc rather than
 738         xmalloc, memset.  Don't bother assigning NULL to known zero mem.
 739         (subseg_set_rest): Remove unnecessary cast.
 740         * write.c: Include libbfd.h.  Replace PTR with void * throughout.
 741         Remove unnecessary forward declarations and casts.
 742         (set_symtab): Delete extern bfd_alloc.
 743         (fixup_segment): Move.
 744
 745 2007-02-15  Nathan Sidwell  <nathan@codesourcery.com>
 746
 747         * config/m68k-parse.h (m68k_register): Add ROMBAR0, ASID.
 748         * config/tc-m68k.c (mcfv4e_ctrl): Add ColdFire specific names.
 749         (mcf5475_ctrl, mcf5485_ctrl): New.
 750         (m68k_cpus): Use mcf5485_ctrl and mcf5485_ctrl for those families.
 751         (m68k_ip): Add ASID, MMUBAR, ROMBAR0 handling.
 752         (init_table): Add asid, mmubar, adjust rombar0.
 753
 754 2007-02-14  Alan Modra  <amodra@bigpond.net.au>
 755
 756         * config/tc-i386.h (Seg2ShortForm, Seg3ShortForm): Delete.
 757         * config/tc-i386.c: Wrap overly long lines, whitespace fixes.
 758         (process_operands): Move old Seg2ShortForm and Seg3ShortForm
 759         code, and test for these insns using a combination of
 760         opcode_modifier and operand_types.
 761
 762 2007-02-07  Paul Brook  <paul@codesourcery.com>
 763
 764         * configure.tgt: Add arm*-*-uclinux-*eabi.
 765
 766 2007-02-05  Dave Brolley  <brolley@redhat.com>
 767             Richard Sandiford  <rsandifo@redhat.com>
 768             DJ Delorie  <dj@redhat.com>
 769             Stan Cox  <scox@redhat.com>
 770             Jim Blandy  <jimb@redhat.com>
 771             Nick Clifton  <nickc@redhat.com>
 772             Jim Wilson  <wilson@redhat.com>
 773             Frank Ch. Eigler  <fche@redhat.com>
 774             Graydon Hoare  <graydon@redhat.com>
 775             Ben Elliston  <bje@redhat.com>
 776             John Healy  <jhealy@redhat.com>
 777             Richard Henderson  <rth@redhat.com>
 778
 779         * Makefile.am (CPU_TYPES): Add mep.
 780         (TARGET_CPU_CFILES): Add tc-mep.c.
 781         (TARGET_CPU_HFILES): Add tc-mep.h.
 782         (DEPTC_mep_elf): New variable.
 783         (DEPTC_mep_coff): Likewise.
 784         (DEPOBJ_mep_coff, DEPOBJ_mep_elf, DEP_mep_coff, DEP_mep_elf): Likewise.
 785         * configure.in: Support mep.
 786         * configure.tgt: Likewise.
 787         * config/tc-mep.c: New file.
 788         * config/obj-elf.c: New file.
 789         * config/tc-mep.c: New file.
 790         * config/tc-mep.h: New file.
 791         * testsuite/gas/mep: New testsuite with content.
 792         * Makefile.in: Regenerate.
 793         * configure: Regenerate.
 794
 795 2007-02-05  Dave Brolley  <brolley@redhat.com>
 796
 797         * cgen.c (gas_cgen_install_complex_reloc): Removed.
 798         (complex_reloc_installation_howto): Removed.
 799
 800 2007-02-05  Dave Brolley  <brolley@redhat.com>
 801             Graydon Hoare  <graydon@redhat.com>
 802             DJ Delorie  <dj@redhat.com>
 803             Catherine Moore  <clm@redhat.com>
 804             Michael Chastain  <chastain@redhat.com>
 805             Frank Ch. Eigler  <fche@redhat.com>
 806
 807         * symbols.c (use_complex_relocs_for): New, to decide
 808         when to use complex relocs. Add signed RELC support.
 809         (resolve_symbol_value): Call use_complex_relocs_for. Unconditionally
 810         encode expression symbols as mangled complex relocation symbols (when
 811         compiled with -DOBJ_COMPLEX_RELOC).
 812         (symbol_relc_make_sym,value,expr): New traversal/conversion routines.
 813         * cgen.c (gas_cgen_md_apply_fix3):  Only set signed_p if RELC. Call
 814         encode_addend with new args. Modify to get start, length from
 815         ifield whenever it is set. Also change condition on which
 816         self-describing relocs are encoded. Add hook into
 817         gas_cgen_encode_addend.
 818         (queue_fixup_recursively): Add signed RELC support. Change from masked
 819         expr to trunc flag. Restore assignment of sub-field value to
 820         temporary in fixups array. Reflect changed meaning of last arg to
 821         queue_fixup_recursively.
 822         (fixup): Add cgen_maybe_multi_ifield member.
 823         (make_right_shifted_expr): New function.
 824         (queue_fixup): Change to recursive function that fragments
 825         fixups if operand has a multi-ifield.
 826         (gas_cgen_parse_operand): Add RELC code to wrap expressions in
 827         symbols, call weak_operand_overflow_check, and fragment call
 828         queue_fixup with operand fields.
 829         (gas_cgen_finish_insn) Modify to manage ifield pointer.
 830         (weak_operand_overflow_check): New function to try to select
 831         insns correctly.
 832         (gas_cgen_encode_addend): New function for relc.
 833         (gas_cgen_install_complex_reloc): Likewise.
 834         (gas_cgen_tc_gen_reloc): Add hook into gas_cgen_install_complex_reloc.
 835         * write.h (struct fix): Add msb_field_p to fx_cgen sub-struct. Add
 836         cgen_maybe_multi_ifield field to fx_cgen substructure.
 837         * cgen.h (GAS_CGEN_MAX_FIXUPS): Bump from 3 up to 32.
 838         * symbols.h (symbol_relc_make_sym,value,expr): New prototypes.
 839
 840 2007-02-03  DJ Delorie  <dj@delorie.com>
 841
 842         * config/tc-m32c.c (m32c_cons_fix_new): New.  Added to support 3
 843         byte relocs.
 844         * config/tc-m32c.h (TC_CONS_FIX_NEW): Define.
 845         (m32c_cons_fix_new): Prototype.
 846
 847 2007-02-02  Bob Wilson  <bob.wilson@acm.org>
 848
 849         * config/tc-xtensa.c (xg_build_to_insn): Use tinsn_init.
 850         (xg_expand_assembly_insn, istack_push_space, istack_pop): Likewise.
 851
 852 2007-02-02  Bob Wilson  <bob.wilson@acm.org>
 853
 854         * config/tc-xtensa.c (SUFFIX_MAP, suffix_relocs): New.
 855         (xtensa_elf_suffix): Use suffix_relocs instead of local mapping table.
 856         (map_suffix_reloc_to_operator): New.
 857         (map_operator_to_reloc): New.
 858         (expression_maybe_register): Fix incorrect test of return value from
 859         xtensa_elf_suffix.  Rearrange to use map_suffix_reloc_to_operator.
 860         (xg_assemble_literal, convert_frag_immed): Use map_operator_to_reloc.
 861
 862 2007-02-02  Bob Wilson  <bob.wilson@acm.org>
 863
 864         * config/xtensa-istack.h (struct tinsn_struct): Delete fixup field.
 865         (tinsn_get_tok): Delete prototype.
 866         * config/tc-xtensa.c (tinsn_get_tok): Delete.
 867
 868 2007-02-02  Bob Wilson  <bob.wilson@acm.org>
 869
 870         * config/xtensa-relax.h (struct build_instr): Delete id field.
 871         * config/xtensa-relax.c (widen_spec_list): Remove zeros from LITERAL
 872         and LABEL tokens.
 873         (append_literal_op, append_label_op): Remove litnum/labnum arguments;
 874         set op_data fields to zero.
 875         (parse_id_constant): Delete.
 876         (build_transition): Remove code to handle numbered literals and labels.
 877
 878 2007-02-02  Bob Wilson  <bob.wilson@acm.org>
 879
 880         * config/xtensa-relax.c (build_transition): Remove code after as_fatal.
 881         (build_transition_table): Likewise.
 882
 883 2007-02-01  Bob Wilson  <bob.wilson@acm.org>
 884
 885         * config/tc-xtensa.c (xg_add_opcode_fix, md_apply_fix): Delete use of
 886         fx_tcbit.
 887         * config/tc-xtensa.h (TC_FORCE_RELOCATION_LOCAL): Remove.
 888
 889 2007-02-02  Alan Modra  <amodra@bigpond.net.au>
 890
 891         * write.h (struct fix <fx_pcrel_adjust, fx_size>): Move.
 892         (struct fix <fx_plt>): Rename to tcbit2.
 893         * write.c (fix_new_internal): Adjust.
 894         (TC_FORCE_RELOCATION_LOCAL): Don't test fx_plt.
 895         * config/tc-arm.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
 896         * config/tc-cris.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
 897         * config/tc-i386.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
 898         * config/tc-i960.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
 899         * config/tc-sh.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
 900         * config/tc-sh64.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
 901         * config/tc-sparc.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
 902         * config/tc-msp430.c (msp430_force_relocation_local): Likewise.
 903         * config/tc-ia64.c (emit_one_bundle): Don't set fx_plt.
 904         * config/tc-ia64.h (TC_FORCE_RELOCATION_LOCAL): Don't test fx_plt.
 905         Instead, compare fx_r_type.
 906         * config/tc-xtensa.c (xg_add_opcode_fix, md_apply_fix): Use
 907         fx_tcbit in place of fx_plt.
 908         * config/tc-xtensa.h (TC_FORCE_RELOCATION_LOCAL): Define.
 909         * doc/internals.texi (TC_FORCE_RELOCATION_LOCAL): Remove reference
 910         to fx_plt.
 911
 912 2007-01-30  Nick Clifton  <nickc@redhat.com>
 913
 914         * as.c (main): Mark symbols created via the --defsym command line
 915         option as volatile so that they can be overridden later on by a
 916         .set directive.  This maintains compatibility with the behaviour
 917         of earlier versions of the assembler.
 918         * doc/as.texinfo (--defsym): Document that the defined symbol's
 919         value can be overridden via a .set directive.
 920
 921 2007-01-28  H.J. Lu  <hongjiu.lu@intel.com>
 922
 923         * config/tc-i386.c (swap_imm_operands): Renamed to ...
 924         (swap_2_operands): This.  Take 2 ints.
 925         (md_assemble): Updated.
 926         (swap_operands): Call swap_2_operands to swap 2 operands.
 927
 928 2007-01-24  DJ Delorie  <dj@redhat.com>
 929
 930         * config/tc-m32c.c (md_pseudo_table): Add .3byte.
 931
 932 2007-01-22  Nick Clifton  <nickc@redhat.com>
 933
 934         PR gas/3871
 935         * tc-score.c: Remove unnecessary uses of _().
 936         Make the err_msg[] a file level local array in order to save
 937         storage space.
 938         Remove unnecessary sprintf()s.
 939
 940 2007-01-18  Mei Ligang  <ligang@sunnorth.com.cn>
 941
 942         PR gas/3871
 943         * config/tc-score.c : Using _() for const string.
 944         Do not assign inst.error with a local string pointer.
 945         (md_section_align): Pad section.
 946
 947 2007-01-13  H.J. Lu  <hongjiu.lu@intel.com>
 948
 949         * config/tc-i386.c (build_modrm_byte): Check number of operands
 950         when procssing memory/register operand.
 951
 952 2007-01-12  Nick Clifton  <nickc@redhat.com>
 953
 954         PR gas/3856
 955         * macro.c (expand_irp): Do not ignore spaces inside quoted
 956         strings.
 957
 958 2007-01-12  Alan Modra  <amodra@bigpond.net.au>
 959
 960         * config/tc-spu.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
 961         * config/tc-m32r.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
 962         * config/tc-mn10300.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
 963         (TC_FORCE_RELOCATION): Define.
 964         (TC_FORCE_RELOCATION_LOCAL): Define.
 965         * config/tc-mn10300.c (mn10300_fix_adjustable): Adjust.
 966
 967 2007-01-12  Alan Modra  <amodra@bigpond.net.au>
 968
 969         * input-file.c (input_file_open): Check fgets return.
 970
 971 2007-01-11  Paul Brook  <paul@codesourcery.com>
 972
 973         * config/tc-arm.c (do_t_add_sub): Use Rd and Rs.
 974
 975 2007-01-11  Nick Clifton  <nickc@redhat.com>
 976
 977         PR gas/3707
 978         * config/tc-arm.c (md_begin): Cope with an NULL mcpu_fpu_opt
 979         variable.
 980
 981         * config/tc-mcore.c (md_number_to_chars): Use
 982         number_to_chars_{big|little}endian.
 983
 984 2007-01-08  Kazu Hirata  <kazu@codesourcery.com>
 985
 986         * config/tc-m68k.c (m68k_archs, m68k_cpus): Treat Fido as an
 987         architecture by itself.
 988         (m68k_ip): Don't issue a warning for tbl instructions on fido.
 989         (m68k_elf_final_processing): Treat Fido as an architecture by
 990         itself.
 991
 992 2007-01-08  Kai Tietz   <kai.tietz@onevision.com>
 993
 994         * configure.tgt: Renamed target x86_64-*-mingw64 to x86_64-*-mingw*
 995
 996 2007-01-05  H.J. Lu  <hongjiu.lu@intel.com>
 997
 998         * config/tc-i386.c (set_intel_syntax): Update set_intel_syntax
 999         depending on allow_naked_reg.
1000
1001 2007-01-04  Paul Brook  <paul@codesourcery.com>
1002
1003         * config/tc-arm.c (do_cpsi): Set mmod bit for 2 argument form.
1004
1005 2007-01-04  H.J. Lu  <hongjiu.lu@intel.com>
1006
1007         PR gas/3830
1008         * config/tc-i386.c (register_prefix): New.
1009         (set_intel_syntax): Set set_intel_syntax to "" if register
1010         prefix isn't needed.
1011         (check_byte_reg): Use register_prefix for error message.
1012         (check_long_reg): Likewise.
1013         (check_qword_reg): Likewise.
1014         (check_word_reg): Likewise.
1015
1016 2006-01-04  Julian Brown  <julian@codesourcery.com>
1017
1018         * config/tc-arm.c (do_neon_shl_imm): Swap rN, rM.
1019         (do_neon_qshl_imm): Likewise.
1020         (do_neon_rshl): New function. Handle rounding variants of
1021         v{q}shl-by-register.
1022         (insns): Use do_neon_rshl for vrshl, vqrshl.
1023
1024 2007-01-04  Paul Brook  <paul@codesourcery.com>
1025
1026         * config/tc-arm.c (NEON_ENC_TAB): Fix encoding of vclt, vcle, vaclt
1027         and vacle.
1028
1029 2007-01-03  H.J. Lu  <hongjiu.lu@intel.com>
1030
1031         * config/tc-i386.c (swap_operands): Remove branches.
1032
1033 2007-01-03  H.J. Lu  <hongjiu.lu@intel.com>
1034
1035         * config/tc-i386.c: Update copyright year.
1036         * config/tc-i386.h: Likewise.
1037
1038 2007-01-03  H.J. Lu  <hongjiu.lu@intel.com>
1039
1040         * config/tc-i386.c (smallest_imm_type): Return unsigned int
1041         instead of int.
1042
1043 2007-01-03  H.J. Lu  <hongjiu.lu@intel.com>
1044
1045         * config/tc-i386.c: Convert to ISO C90 formatting
1046         * config/tc-i386.h: Likewise.
1047
1048 2007-01-03  David Daney  <ddaney@avtrex.com>
1049
1050         * config/tc-mips.c (md_show_usage):  Clean up -mno-shared
1051         documentation.
1052
1053 For older changes see ChangeLog-2006
1054 \f
1055 Local Variables:
1056 mode: change-log
1057 left-margin: 8
1058 fill-column: 74
1059 version-control: never
1060 End: