gas/ChangeLog

   1 2013-07-07  Richard Sandiford  <rdsandiford@googlemail.com>
   2
   3         * config/tc-mips.c (validate_mips_insn, validate_micromips_insn):
   4         (mips_ip, mips16_ip): Handle "+i".
   5
   6 2013-07-07  Richard Sandiford  <rdsandiford@googlemail.com>
   7
   8         * config/tc-mips.c (mips32_to_micromips_reg_h_map): Delete.
   9         (micromips_to_32_reg_h_map): Rename to...
  10         (micromips_to_32_reg_h_map1): ...this.
  11         (micromips_to_32_reg_i_map): Rename to...
  12         (micromips_to_32_reg_h_map2): ...this.
  13         (mips_lookup_reg_pair): New function.
  14         (gpr_write_mask, macro): Adjust after above renaming.
  15         (validate_micromips_insn): Remove "mi" handling.
  16         (mips_ip): Likewise.  Parse both registers in a pair for "mh".
  17
  18 2013-07-07  Richard Sandiford  <rdsandiford@googlemail.com>
  19
  20         * config/tc-mips.c (validate_mips_insn, validate_micromips_insn)
  21         (mips_ip): Remove "+D" and "+T" handling.
  22
  23 2013-07-05  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>
  24
  25         * config/tc-s390.c (md_gather_operands, md_apply_fix): Support new
  26         relocs.
  27
  28 2013-07-03  Marcus Shawcroft  <marcus.shawcroft@arm.com>
  29
  30         * config/tc-aarch64.c (reloc_table): Merge got_prel19 into got.
  31
  32 2013-07-02  Marcus Shawcroft  <marcus.shawcroft@arm.com>
  33
  34         * config/tc-aarch64.c (md_apply_fix): Reorder case values.
  35         (aarch64_force_relocation): Likewise.
  36
  37 2013-07-02  Alan Modra  <amodra@gmail.com>
  38
  39         * config/tc-ppc.c (ppc_elf_adjust_symtab): Don't make .TOC. weak.
  40
  41 2013-06-26  Maciej W. Rozycki  <macro@codesourcery.com>
  42
  43         * doc/as.texinfo (Overview): Remove @samp from MIPS ISA names.
  44         * doc/c-mips.texi (MIPS Options): Remove @sc from MIPS ISA names.
  45         Replace @sc{mips16} with literal `MIPS16'.
  46         (MIPS ISA): Replace @sc{mips3} with literal `MIPS III'.
  47
  48 2013-06-26  Yufeng Zhang  <yufeng.zhang@arm.com>
  49
  50         * config/tc-aarch64.c (reloc_table): Replace
  51         BFD_RELOC_AARCH64_LD64_GOT_LO12_NC with
  52         BFD_RELOC_AARCH64_LD_GOT_LO12_NC; likewise to
  53         BFD_RELOC_AARCH64_TLSDESC_LD64_LO12_NC and
  54         BFD_RELOC_AARCH64_TLSIE_LD_GOTTPREL_LO12_NC.
  55         (md_apply_fix): Handle BFD_RELOC_AARCH64_LD_GOT_LO12_NC,
  56         BFD_RELOC_AARCH64_LD32_GOT_LO12_NC,
  57         BFD_RELOC_AARCH64_TLSDESC_LD_LO12_NC,
  58         BFD_RELOC_AARCH64_TLSDESC_LD32_LO12_NC,
  59         BFD_RELOC_AARCH64_TLSIE_LD_GOTTPREL_LO12_NC and
  60         BFD_RELOC_AARCH64_TLSIE_LD32_GOTTPREL_LO12_NC.
  61         (aarch64_force_relocation): Likewise.
  62
  63 2013-06-26  Yufeng Zhang  <yufeng.zhang@arm.com>
  64
  65         * config/tc-aarch64.c (ilp32_p): New static variable.
  66         (elf64_aarch64_target_format): Return the target according to the
  67         value of 'ilp32_p'.
  68         (md_begin): Determine 'mach' according to the value of 'ilp32_p'.
  69         (aarch64_opts): Add support for options '-milp32' and '-mlp64'.
  70         (aarch64_dwarf2_addr_size): New function.
  71         * config/tc-aarch64.h (aarch64_dwarf2_addr_size): New declaration.
  72         (DWARF2_ADDR_SIZE): New define.
  73
  74 2013-06-26  Richard Sandiford  <rdsandiford@googlemail.com>
  75
  76         * doc/c-mips.texi: Use ISA instead of @sc{isa}.
  77
  78 2013-06-26  Richard Sandiford  <rdsandiford@googlemail.com>
  79
  80         * config/tc-mips.c (validate_mips_insn): Use STYPE rather than SHAMT.
  81
  82 2013-06-25  Maciej W. Rozycki  <macro@codesourcery.com>
  83
  84         * config/tc-mips.c (mips_set_options): Add insn32 member.
  85         (mips_opts): Initialize it.
  86         (NOP_INSN, NOP_INSN_SIZE): Handle insn32 mode.
  87         (options): Add OPTION_INSN32 and OPTION_NO_INSN32 enum values.
  88         (md_longopts): Add "minsn32" and "mno-insn32" options.
  89         (is_size_valid): Handle insn32 mode.
  90         (md_assemble): Pass instruction string down to macro.
  91         (brk_fmt): Add second dimension and insn32 mode initializers.
  92         (mfhl_fmt): Likewise.
  93         (BRK_FMT, MFHL_FMT): Handle insn32 mode.
  94         (macro_build) <'c'>: Handle microMIPS 32-bit BREAK encoding.
  95         (macro_build_jalr, move_register): Handle insn32 mode.
  96         (macro_build_branch_rs): Likewise.
  97         (macro): Handle insn32 mode.
  98         <M_JRADDIUSP>, <M_JRC>, <M_MOVEP>: New cases.
  99         (mips_ip): Handle insn32 mode.
 100         (md_parse_option): Handle OPTION_INSN32 and OPTION_NO_INSN32.
 101         (s_mipsset): Handle "insn32" and "noinsn32" pseudo-ops.
 102         (mips_handle_align): Handle insn32 mode.
 103         (md_show_usage): Add -minsn32 and -mno-insn32.
 104
 105         * doc/as.texinfo (Target MIPS options): Add -minsn32 and
 106         -mno-insn32 options.
 107         (-minsn32, -mno-insn32): New options.
 108         * doc/c-mips.texi (MIPS Opts): Add -minsn32 and -mno-insn32
 109         options.
 110         (MIPS assembly options): New node.  Document .set insn32 and
 111         .set noinsn32.
 112         (MIPS-Dependent): List the new node.
 113
 114 2013-06-25  Nick Clifton  <nickc@redhat.com>
 115
 116         * config/tc-msp430.c (msp430_srcoperand): Do not allow the use of
 117         the PC in indirect addressing on 430xv2 parts.
 118         (msp430_operands): Add version test to hardware bug encoding
 119         restrictions.
 120
 121 2013-06-24  Roland McGrath  <mcgrathr@google.com>
 122
 123         * config/tc-arm.c (parse_reg_list): Use skip_past_char for '}',
 124         so it skips whitespace before it.
 125         (s_arm_unwind_save_mmxwr, s_arm_unwind_save_mmxwcg): Likewise.
 126
 127         * config/tc-arm.c (arm_symbol_chars): Include '{' and '}'.
 128         (arm_reg_parse_multi): Skip whitespace first.
 129         (parse_reg_list): Likewise.
 130         (parse_vfp_reg_list): Likewise.
 131         (s_arm_unwind_save_mmxwcg): Likewise.
 132
 133 2013-06-24  Nick Clifton  <nickc@redhat.com>
 134
 135         PR gas/15623
 136         * config/tc-arm.c (do_t_smc): Mark as ending an IT block.
 137
 138 2013-06-23  Richard Sandiford  <rdsandiford@googlemail.com>
 139
 140         * config/tc-mips.c (mips_ip): Fix swapped bit numbers in comments.
 141
 142 2013-06-23  Richard Sandiford  <rdsandiford@googlemail.com>
 143
 144         * config/tc-mips.c: Assert that offsetT and valueT are at least
 145         8 bytes in size.
 146         (GPR_SMIN, GPR_SMAX): New macros.
 147         (macro, mips_ip): Remove code for 4-byte valueT and offsetT.
 148
 149 2013-06-22  Richard Sandiford  <rdsandiford@googlemail.com>
 150
 151         * config/tc-mips.c: Remove OBJ_ELF, OBJ_MAYBE_ELF and IS_ELF
 152         conditions.  Remove any code deselected by them.
 153         (s_mips_frame, s_mips_mask): Handle ECOFF_DEBUGGING case first.
 154
 155 2013-06-22  Richard Sandiford  <rdsandiford@googlemail.com>
 156
 157         * NEWS: Note removal of ECOFF support.
 158         * doc/as.texinfo (--emulation): Update for the removal of MIPS ECOFF.
 159         * Makefile.am (TARG_ENV_HFILES): Remove config/te-lnews.h.
 160         (MULTI_CFILES): Remove config/e-mipsecoff.c.
 161         * Makefile.in: Regenerate.
 162         * configure.in: Remove MIPS ECOFF references.
 163         (mips-sony-bsd*, mips-*-bsd*, mips-*-lnews*-ecoff, mips-*-*-ecoff):
 164         Delete cases.
 165         (mips-*-irix5*-*, mips*-*-linux*-*, mips*-*-freebsd*)
 166         (mips*-*-kfreebsd*-gnu, mips-*-*-elf): Fold into...
 167         (mips-*-*): ...this single case.
 168         (mipsbecoff, mipslecoff, mipsecoff): Remove emulations.  Expect
 169         MIPS emulations to be e-mipself*.
 170         * configure: Regenerate.
 171         * configure.tgt (mips-sony-bsd*, mips-*-ultrix*, mips-*-osf*)
 172         (mips-*-ecoff*, mips-*-pe*, mips-*-irix*, ips-*-lnews*, mips-*-riscos*)
 173         (mips-*-sysv*): Remove coff and ecoff cases.
 174         * as.c (mipsbecoff, mipslecoff, mipsecoff): Remove.
 175         * ecoff.c: Remove reference to MIPS ECOFF.
 176         * config/e-mipsecoff.c, config/te-lnews.h: Delete files.
 177         * config/tc-mips.c (ECOFF_LITTLE_FORMAT): Delete.
 178         (RDATA_SECTION_NAME, mips_target_form): Remove COFF and ECOFF cases.
 179         (mips_hi_fixup): Tweak comment.
 180         (append_insn): Require a howto.
 181         (mips_after_parse_args): Remove OBJ_MAYBE_ECOFF code.
 182
 183 2013-06-22  Richard Sandiford  <rdsandiford@googlemail.com>
 184
 185         * doc/as.texinfo: Use MIPS rather than @sc{mips} throughout.
 186         Use "CPU" instead of "cpu".
 187         * doc/c-mips.texi: Likewise.
 188         (MIPS Opts): Rename to MIPS Options.
 189         (MIPS option stack): Rename to MIPS Option Stack.
 190         (MIPS ASE instruction generation overrides): Rename to
 191         MIPS ASE Instruction Generation Overrides (for now).
 192         (MIPS floating-point): Rename to MIPS Floating-Point.
 193
 194 2013-06-22  Richard Sandiford  <rdsandiford@googlemail.com>
 195
 196         * doc/c-mips.texi (MIPS Macros): New section.
 197         (MIPS Object): Replace with...
 198         (MIPS Small Data): ...this new section.
 199
 200 2013-06-22  Richard Sandiford  <rdsandiford@googlemail.com>
 201
 202         * doc/c-mips.texi (MIPS symbol sizes): Move section further up file.
 203         Capitalize name.  Use @kindex instead of @cindex for .set entries.
 204
 205 2013-06-22  Richard Sandiford  <rdsandiford@googlemail.com>
 206
 207         * doc/c-mips.texi (MIPS Stabs): Remove section.
 208
 209 2013-06-20  Richard Sandiford  <rdsandiford@googlemail.com>
 210
 211         * config/tc-mips.c (ISA_SUPPORTS_SMARTMIPS, ISA_SUPPORTS_DSP_ASE)
 212         (ISA_SUPPORTS_DSP64_ASE, ISA_SUPPORTS_DSPR2_ASE, ISA_SUPPORTS_EVA_ASE)
 213         (ISA_SUPPORTS_MT_ASE, ISA_SUPPORTS_MCU_ASE, ISA_SUPPORTS_VIRT_ASE)
 214         (ISA_SUPPORTS_VIRT64_ASE): Delete.
 215         (mips_ase): New structure.
 216         (mips_ases): New table.
 217         (FP64_ASES): New macro.
 218         (mips_ase_groups): New array.
 219         (mips_isa_rev, mips_ase_mask, mips_check_isa_supports_ase)
 220         (mips_check_isa_supports_ases, mips_set_ase, mips_lookup_ase): New
 221         functions.
 222         (is_opcode_valid): Use mips_ases to get the 64-bit ASE flags.
 223         (md_parse_option): Use mips_ases and mips_set_ase instead of
 224         separate case statements for each ASE option.
 225         (mips_after_parse_args): Use FP64_ASES.  Use
 226         mips_check_isa_supports_ases to check the ASEs against
 227         other options.
 228         (s_mipsset): Use mips_ases and mips_set_ase instead of
 229         separate if statements for each ASE option.  Use
 230         mips_check_isa_supports_ases, even when a non-ASE option
 231         is specified.
 232
 233 2013-06-19  Greta Yorsh  <Greta.Yorsh@arm.com>
 234
 235         * config/tc-arm.c (arm_cpus): Add support for Cortex-A12.
 236
 237 2013-06-18  Richard Sandiford  <rdsandiford@googlemail.com>
 238
 239         * config/tc-mips.c (md_shortopts, options, md_longopts)
 240         (md_longopts_size): Move earlier in file.
 241
 242 2013-06-18  Richard Sandiford  <rdsandiford@googlemail.com>
 243
 244         * config/tc-mips.c (mips_set_options): Replace separate "ase_*" fields
 245         with a single "ase" bitmask.
 246         (mips_opts): Update accordingly.
 247         (file_ase, file_ase_explicit): New variables.
 248         (file_ase_mips3d, file_ase_mdmx, file_ase_smartmips, file_ase_dsp)
 249         (file_ase_dspr2, file_ase_eva, file_ase_mt, file_ase_virt): Delete.
 250         (ISA_HAS_ROR): Adjust for mips_set_options change.
 251         (is_opcode_valid): Take the base ase mask directly from mips_opts.
 252         (mips_ip): Adjust for mips_set_options change.
 253         (md_parse_option): Likewise.  Update file_ase_explicit.
 254         (mips_after_parse_args): Adjust for mips_set_options change.
 255         Use bitmask operations to select the default ASEs.  Set file_ase
 256         rather than individual per-ASE variables.
 257         (s_mipsset): Adjust for mips_set_options change.
 258         (mips_elf_final_processing): Test file_ase rather than
 259         file_ase_mdmx.  Remove commented-out code.
 260
 261 2013-06-18  Richard Sandiford  <rdsandiford@googlemail.com>
 262
 263         * config/tc-mips.c (mips_cpu_info): Add an "ase" field.
 264         (MIPS_CPU_ASE_SMARTMIPS, MIPS_CPU_ASE_DSP, MIPS_CPU_ASE_MT)
 265         (MIPS_CPU_ASE_MIPS3D, MIPS_CPU_ASE_MDMX, MIPS_CPU_ASE_DSPR2)
 266         (MIPS_CPU_ASE_MCU, MIPS_CPU_ASE_VIRT, MIPS_CPU_ASE_EVA): Delete.
 267         (mips_after_parse_args): Use the new "ase" field to choose
 268         the default ASEs.
 269         (mips_cpu_info_table): Move ASEs from the "flags" field to the
 270         "ase" field.
 271
 272 2013-06-18  Richard Earnshaw  <rearnsha@arm.com>
 273
 274         * config/tc-arm.c (symbol_preemptible): New function.
 275         (relax_branch): Use it.
 276
 277 2013-06-17  Catherine Moore  <clm@codesourcery.com>
 278             Maciej W. Rozycki  <macro@codesourcery.com>
 279             Chao-Ying Fu  <fu@mips.com>
 280
 281         * config/tc-mips.c (mips_set_options): Add ase_eva.
 282         (mips_set_options mips_opts): Add ase_eva.
 283         (file_ase_eva): Declare.
 284         (ISA_SUPPORTS_EVA_ASE): Define.
 285         (IS_SEXT_9BIT_NUM): Define.
 286         (MIPS_CPU_ASE_EVA): Define.
 287         (is_opcode_valid): Add support for ase_eva.
 288         (macro_build): Likewise.
 289         (macro): Likewise.
 290         (validate_mips_insn): Likewise.
 291         (validate_micromips_insn): Likewise.
 292         (mips_ip): Likewise.
 293         (options): Add OPTION_EVA and OPTION_NO_EVA.
 294         (md_longopts): Add -meva and -mno-eva.
 295         (md_parse_option): Process new options.
 296         (mips_after_parse_args): Check for valid EVA combinations.
 297         (s_mipsset): Likewise.
 298
 299 2013-06-14  Richard Sandiford  <rsandifo@linux.vnet.ibm.com>
 300
 301         * dwarf2dbg.h (dwarf2_move_insn): Declare.
 302         * dwarf2dbg.c (line_subseg): Add pmove_tail.
 303         (get_line_subseg): Add create_p argument.  Initialize pmove_tail.
 304         (dwarf2_gen_line_info_1): Update call accordingly.
 305         (dwarf2_move_insn): New function.
 306         * config/tc-mips.c (append_insn): Use dwarf2_move_insn.
 307
 308 2013-06-14  Richard Sandiford  <rsandifo@linux.vnet.ibm.com>
 309
 310         Revert:
 311
 312         2011-09-05  Richard Sandiford  <rdsandiford@googlemail.com>
 313
 314         PR gas/13024
 315         * dwarf2dbg.c (pending_lines, pending_lines_tail): New variables.
 316         (dwarf2_gen_line_info_1): Delete.
 317         (dwarf2_push_line, dwarf2_flush_pending_lines): New functions.
 318         (dwarf2_gen_line_info, dwarf2_emit_label): Use them.
 319         (dwarf2_consume_line_info): Call dwarf2_flush_pending_lines.
 320         (dwarf2_directive_loc): Push previous .locs instead of generating
 321         them immediately.
 322
 323 2013-06-13  Chao-ying Fu  <Chao-ying.Fu@imgtec.com>
 324
 325         * config/tc-mips.c (ISA_SUPPORTS_VIRT_ASE): Support micromips.
 326         (ISA_SUPPORTS_VIRT64_ASE): Support 64-bit micromips.
 327
 328 2013-06-13  Nick Clifton  <nickc@redhat.com>
 329
 330         PR gas/15602
 331         * config/tc-m68k.h (TC_CHECK_ADJUSTED_BROKEN_DOT_WORD): Define.
 332         * config/tc-m68k.c (tc_m68k_check_adjusted_broken_word): New
 333         function.  Generates an error if the adjusted offset is out of a
 334         16-bit range.
 335
 336 2013-06-12  Sandra Loosemore  <sandra@codesourcery.com>
 337
 338         * config/tc-nios2.c (md_apply_fix):  Mask constant
 339         BFD_RELOC_NIOS2_HIADJ16 value to 16 bits.
 340
 341 2013-06-10  Maciej W. Rozycki  <macro@codesourcery.com>
 342
 343         * config/tc-mips.c (append_insn): Don't do branch relaxation for
 344         MIPS-3D instructions either.
 345         (md_convert_frag): Update the COPx branch mask accordingly.
 346
 347         * config/tc-mips.c (md_show_usage): Document --[no-]relax-branch
 348         option.
 349         * doc/as.texinfo (Overview): Add --relax-branch and
 350         --no-relax-branch.
 351         * doc/c-mips.texi (MIPS Opts): Document --relax-branch and
 352         --no-relax-branch.
 353
 354 2013-06-09  Sandra Loosemore  <sandra@codesourcery.com>
 355
 356         * config/tc-nios2.c (nios2_parse_args):  Allow trap argument to
 357         omitted.
 358
 359 2013-06-08  Catherine Moore  <clm@codesourcery.com>
 360
 361         * config/tc-mips.c (is_opcode_valid):  Build ASE mask.
 362         (is_opcode_valid_16): Pass ase value to opcode_is_member.
 363         (append_insn): Change INSN_xxxx to ASE_xxxx.
 364
 365 2013-06-01  George Thomas <george.thomas@atmel.com>
 366
 367         * gas/config/tc-avr.c: Change ISA for devices with USB support to
 368         AVR_ISA_XMEGAU
 369
 370 2013-05-31  H.J. Lu  <hongjiu.lu@intel.com>
 371
 372         * config/tc-i386.c (md_begin): Don't align text/data/bss sections
 373         for ELF.
 374
 375 2013-05-31  Paul Brook  <paul@codesourcery.com>
 376
 377         gas/
 378         * config/tc-mips.c (s_ehword): New.
 379
 380 2013-05-30  Paul Brook  <paul@codesourcery.com>
 381
 382         * config/tc-mips.c (md_apply_fix): Support BFD_RELOC_MIPS_EH.
 383
 384 2013-05-29  Maciej W. Rozycki  <macro@codesourcery.com>
 385
 386         * write.c (resolve_reloc_expr_symbols): On REL targets don't
 387         convert relocs who have no relocatable field either.  Rephrase
 388         the conditional so that the PC-relative check is only applied
 389         for REL targets.
 390
 391 2013-05-28  Chao-ying Fu  <Chao-ying.Fu@imgtec.com>
 392
 393         * config/tc-mips.c (macro) <ld>: Don't use $zero for address
 394         calculation.
 395
 396 2013-05-28  Yufeng Zhang  <yufeng.zhang@arm.com>
 397
 398         * config/tc-aarch64.c (reloc_table): Update to use
 399         BFD_RELOC_AARCH64_TLSDESC_ADR_PAGE21 instead of
 400         BFD_RELOC_AARCH64_TLSDESC_ADR_PAGE.
 401         (md_apply_fix): Likewise.
 402         (aarch64_force_relocation): Likewise.
 403
 404 2013-05-28  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>
 405
 406         * config/tc-arm.c (it_fsm_post_encode): Improve
 407         warning messages about deprecated IT block formats.
 408
 409 2013-05-28  Marcus Shawcroft  <marcus.shawcroft@arm.com>
 410
 411         * config/tc-aarch64.c (md_apply_fix): Move value range checking
 412         inside fx_done condition.
 413
 414 2013-05-22  Jürgen Urban  <JuergenUrban@gmx.de>
 415
 416         * config/tc-mips.c (macro): Handle M_LQC2_AB and M_SQC2_AB.
 417
 418 2013-05-20  Peter Bergner <bergner@vnet.ibm.com>
 419
 420         * config/tc-ppc.c (ppc_setup_opcodes): Use new_seg to fix error
 421         and clean up warning when using PRINT_OPCODE_TABLE.
 422
 423 2013-05-20  Alan Modra  <amodra@gmail.com>
 424
 425         * config/tc-ppc.c (md_apply_fix): Hoist code common to insn
 426         and data fixups performing shift/high adjust/sign extension on
 427         fieldval.  Sink fx_pcrel handling and checks.  Use fixP->fx_size
 428         when writing data fixups rather than recalculating size.
 429
 430 2013-05-16  Jan-Benedict Glaw  <jbglaw@lug-owl.de>
 431
 432         * doc/c-msp430.texi: Fix typo.
 433
 434 2013-05-16  Tristan Gingold  <gingold@adacore.com>
 435
 436         * config/tc-ppc.c (ppc_is_toc_sym): Symbols of class XMC_TC
 437         are also TOC symbols.
 438
 439 2013-05-16  Nick Clifton  <nickc@redhat.com>
 440
 441         * config/tc-msp430.c: Make -mmcu recognise more part numbers.
 442         Add -mcpu command to specify core type.
 443         * doc/c-msp430.texi: Update documentation.
 444
 445 2013-05-09  Andrew Pinski  <apinski@cavium.com>
 446
 447         * config/tc-mips.c (struct mips_set_options): New ase_virt field.
 448         (mips_opts): Update for the new field.
 449         (file_ase_virt): New variable.
 450         (ISA_SUPPORTS_VIRT_ASE): New macro.
 451         (ISA_SUPPORTS_VIRT64_ASE): New macro.
 452         (MIPS_CPU_ASE_VIRT): New define.
 453         (is_opcode_valid): Handle ase_virt.
 454         (macro_build): Handle "+J".
 455         (validate_mips_insn): Likewise.
 456         (mips_ip): Likewise.
 457         (enum options): Add OPTION_VIRT and OPTION_NO_VIRT.
 458         (md_longopts): Add mvirt and mnovirt
 459         (md_parse_option): Handle OPTION_VIRT and OPTION_NO_VIRT.
 460         (mips_after_parse_args): Handle ase_virt field.
 461         (s_mipsset): Handle "virt" and "novirt".
 462         (mips_elf_final_processing): Add a comment about virt ASE might need
 463         a new flag.
 464         (md_show_usage): Print out the usage of -mvirt and mno-virt options.
 465         * doc/c-mips.texi: Document -mvirt and -mno-virt.
 466         Document ".set virt" and ".set novirt".
 467
 468 2013-05-09  Alan Modra  <amodra@gmail.com>
 469
 470         * config/tc-ppc.c (md_apply_fix): Sign extend fieldval under
 471         control of operand flag bits.
 472
 473 2013-05-07  Alan Modra  <amodra@gmail.com>
 474
 475         * config/tc-ppc.c (PPC_VLE_SPLIT16A): Delete unused macro.
 476         (PPC_VLE_SPLIT16D, PPC_VLE_LO16A, PPC_VLE_LO16D): Likewise.
 477         (PPC_VLE_HI16A, PPC_VLE_HI16D): Likewise.
 478         (PPC_VLE_HA16A, PPC_VLE_HA16D): Likewise.
 479         (md_apply_fix): Set fx_no_overflow for assorted relocations.
 480         Shift and sign-extend fieldval for use by some VLE reloc
 481         operand->insert functions.
 482
 483 2013-05-06  Paul Brook  <paul@codesourcery.com>
 484             Catherine Moore  <clm@codesourcery.com>
 485
 486         * config/tc-mips.c (md_pcrel_from): Handle BFD_RELOC_32_PCREL.
 487         (limited_pcrel_reloc_p): Likewise.
 488         (md_apply_fix): Likewise.
 489         (tc_gen_reloc): Likewise.
 490
 491 2013-05-06  Richard Sandiford  <rdsandiford@googlemail.com>
 492
 493         * config/tc-mips.c (limited_pcrel_reloc_p): New function.
 494         (mips_fix_adjustable): Adjust pc-relative check to use
 495         limited_pc_reloc_p.
 496
 497 2013-05-02  Richard Sandiford  <rdsandiford@googlemail.com>
 498
 499         * config/tc-mips.c (mips_pseudo_table): Add stabd and stabs entries.
 500         (s_mips_stab): Do not restrict to stabn only.
 501
 502 2013-05-02  Nick Clifton  <nickc@redhat.com>
 503
 504         * config/tc-msp430.c: Add support for the MSP430X architecture.
 505         Add code to insert a NOP instruction after any instruction that
 506         might change the interrupt state.
 507         Add support for the LARGE memory model.
 508         Add code to initialise the .MSP430.attributes section.
 509         * config/tc-msp430.h: Add support for the MSP430X architecture.
 510         * doc/c-msp430.texi: Document the new -mL and -mN command line
 511         options.
 512         * NEWS: Mention support for the MSP430X architecture.
 513
 514 2013-05-01  Maciej W. Rozycki  <macro@codesourcery.com>
 515
 516         * configure.tgt: Replace alpha*-*-linuxecoff* pattern with
 517         alpha*-*-linux*ecoff*.
 518
 519 2013-04-30  Chao-ying Fu  <Chao-ying.Fu@imgtec.com>
 520
 521         * config/tc-mips.c (mips_ip): Add sizelo.
 522         For "+C", "+G", and "+H", set sizelo and compare against it.
 523
 524 2013-04-29  Nick Clifton  <nickc@redhat.com>
 525
 526         * as.c (Options): Add -gdwarf-sections.
 527         (parse_args): Likewise.
 528         * as.h (flag_dwarf_sections): Declare.
 529         * dwarf2dbg.c (emit_fixed_inc_line_addr): Skip section changes.
 530         (process_entries): When -gdwarf-sections is enabled generate
 531         fragmentary .debug_line sections.
 532         (out_debug_line): Set the section for the .debug_line section end
 533         symbol.
 534         * doc/as.texinfo: Document -gdwarf-sections.
 535         * NEWS: Mention -gdwarf-sections.
 536
 537 2013-04-26  Christian Groessler  <chris@groessler.org>
 538
 539         * config/tc-z8k.c (md_parse_option): Set z8k_target_from_cmdline
 540         according to the target parameter.  Don't call s_segm since s_segm
 541         calls bfd_set_arch_mach using stdoutput, but stdoutput isn't
 542         initialized yet.
 543         (md_begin): Call s_segm according to target parameter from command
 544         line.
 545
 546 2013-04-25  Alan Modra  <amodra@gmail.com>
 547
 548         * configure.in: Allow little-endian linux.
 549         * configure: Regenerate.
 550
 551 2013-04-24  Sandra Loosemore  <sandra@codesourcery.com>
 552
 553         * config/tc-nios2.c (nios2_control_register_arg_p): Rename
 554         "fstatus" control register to "eccinj".
 555
 556 2013-04-19  Kai Tietz  <ktietz@redhat.com>
 557
 558         * configure.tgt (i386-*-cygwin): Handle x86_64 cygwin.
 559
 560 2013-04-15  Julian Brown  <julian@codesourcery.com>
 561
 562         * expr.c (add_to_result, subtract_from_result): Make global.
 563         * expr.h (add_to_result, subtract_from_result): Add prototypes.
 564         * config/tc-sh.c (sh_optimize_expr): Use add_to_result,
 565         subtract_from_result to handle extra bit of precision for .sleb128
 566         directive operands.
 567
 568 2013-04-10  Julian Brown  <julian@codesourcery.com>
 569
 570         * read.c (convert_to_bignum): Add sign parameter. Use it
 571         instead of X_unsigned to determine sign of resulting bignum.
 572         (emit_expr): Pass extra argument to convert_to_bignum.
 573         (emit_leb128_expr): Use X_extrabit instead of X_unsigned. Pass
 574         X_extrabit to convert_to_bignum.
 575         (parse_bitfield_cons): Set X_extrabit.
 576         * expr.c (make_expr_symbol, expr_build_uconstant, operand):
 577         Initialise X_extrabit field as appropriate.
 578         (add_to_result): New.
 579         (subtract_from_result): New.
 580         (expr): Use above.
 581         * expr.h (expressionS): Add X_extrabit field.
 582
 583 2013-04-10  Jan Beulich <jbeulich@suse.com>
 584
 585         * gas/config/tc-arm.c (encode_arm_addr_mode_3): Only reject base
 586         register being PC when is_t or writeback, and use distinct
 587         diagnostic for the latter case.
 588
 589 2013-04-10  Jan Beulich <jbeulich@suse.com>
 590
 591         * gas/config/tc-arm.c (parse_operands): Re-write
 592         po_barrier_or_imm().
 593         (do_barrier): Remove bogus constraint().
 594         (do_t_barrier): Remove.
 595
 596 2013-04-09 Joerg Wunsch <joerg.wunsch@atmel.com>
 597
 598         * gas/config/tc-avr.c (mcu_types): Add ATmega64RFR2,
 599         ATmega644RFR2, ATmega128RFR2, ATmega1284RFR2, ATmega256RFR2,
 600         ATmega2564RFR2
 601         * gas/doc/c-avr.texi (-mmcu documentation): Likewise.
 602
 603 2013-04-09  Jan Beulich <jbeulich@suse.com>
 604
 605         * gas/config/tc-arm.c (do_vmrs): Accept all control registers.
 606         Use local variable Rt in more places.
 607         (do_vmsr): Accept all control registers.
 608
 609 2013-04-09  Jan Beulich <jbeulich@suse.com>
 610
 611         * gas/config/tc-arm.c (do_neon_mov): Fake an instruction suffix
 612         if there was none specified for moves between scalar and core
 613         register.
 614
 615 2013-04-09  Jan Beulich <jbeulich@suse.com>
 616
 617         * gas/config/tc-arm.c (do_neon_ldx_stx): Reject VSTn in the
 618         NEON_ALL_LANES case.
 619
 620 2013-04-08  Jan Beulich <jbeulich@suse.com>
 621
 622         * gas/config/tc-arm.c (do_neon_ldr_str): Correct disgnostics for
 623         PC-relative VSTR.
 624
 625 2013-04-08  Jan Beulich <jbeulich@suse.com>
 626
 627         * gas/config/tc-arm.c (reg_names): Convert duplicate SP_fiq
 628         entry to sp_fiq.
 629
 630 2013-04-03  Alan Modra  <amodra@gmail.com>
 631
 632         * doc/as.texinfo: Add support to generate man options for h8300.
 633         * doc/c-h8300.texi: Likewise.
 634
 635 2013-03-28  Ramana Radhakrishnan  <ramana.radhakrishnan@arm.com>
 636
 637         * config/tc-arm.c (arm_cpus): Add support for Cortex-A53 and
 638         Cortex-A57.
 639
 640 2013-03-27  Alexis Deruelle  <alexis.deruelle@gmail.com>
 641
 642         PR binutils/15068
 643         * config/tc-tic6x.c (tic6x_try_encode): Add use of bitfields array.
 644
 645 2013-03-26  Nick Clifton  <nickc@redhat.com>
 646
 647         PR gas/15295
 648         * listing.c (rebuffer_line): Rewrite to avoid seeking back to the
 649         start of the file each time.
 650
 651         PR gas/15178
 652         * config/tc-sparc.h (ELF_TARGET_FORMAT): Set to elf32-sparc for
 653         FreeBSD targets.
 654
 655 2013-03-26  Douglas B Rupp  <rupp@gnat.com>
 656
 657         * config/tc-ia64.c (emit_one_bundle): Move last_slot adjustment
 658         after fixup.
 659
 660 2013-03-21  Will Newton  <will.newton@linaro.org>
 661
 662         * config/tc-arm.c (encode_thumb32_addr_mode): Emit an error for all
 663         pc-relative str instructions in Thumb mode.
 664
 665 2013-03-21  Michael Schewe  <michael.schewe@gmx.net>
 666
 667         * config/tc-h8300.c (do_a_fix_imm): Add relaxation of mov
 668         @(disp:32,ERx) to mov @(disp:16,ERx) insns by new reloc
 669         R_H8_DISP32A16.
 670         * config/tc-h8300.h: Remove duplicated defines.
 671
 672 2013-03-21  Senthil Kumar Selvaraj  <senthil_kumar.selvaraj@atmel.com>
 673
 674         PR gas/15282
 675         * tc-avr.c (mcu_has_3_byte_pc): New function.
 676         (tc_cfi_frame_initial_instructions): Call it to find return
 677         address size.
 678
 679 2013-03-20  Alexis Deruelle  <alexis.deruelle@gmail.com>
 680
 681         PR gas/15095
 682         * config/tc-tic6x.c (tic6x_try_encode): Handle
 683         tic6x_coding_dreg_(msb|lsb) field coding types and use it to
 684         encode register pair numbers when required.
 685
 686 2013-03-15  Will Newton  <will.newton@linaro.org>
 687
 688         * config/tc-arm.c (do_neon_ldr_str): Fix error check for PC register
 689         in vstr in Thumb mode for pre-ARMv7 cores.
 690
 691 2013-03-14  Andreas Schwab  <schwab@suse.de>
 692
 693         * doc/c-arc.texi (ARC Directives): Revert last change and use
 694         @itemize instead of @table.
 695         * doc/c-arm.texi (ARM-Instruction-Set): Likewise.
 696
 697 2013-03-14  Nick Clifton  <nickc@redhat.com>
 698
 699         PR gas/15273
 700         * config/tc-arm.c (do_co_reg): Do not call check_obsolete with a
 701         NULL message, instead just check ARM_CPU_IS_ANY directly.
 702
 703 2013-03-14  Nick Clifton  <nickc@redhat.com>
 704
 705         PR gas/15212
 706         * doc/c-arc.texi (ARC Directives): Use @code instead of @bullet
 707         for table format.
 708         * doc/c-arm.texi (ARM-Instruction-Set): Likewise.  Also add text
 709         to the @item directives.
 710         (ARM-Neon-Alignment): Move to correct place in the document.
 711         * doc/c-cr16.texi (CR16 Operand Qualifiers): Fix up table
 712         formatting.
 713         * doc/c-tic54x.texi (TIC54X-Subsyms): Correct use of
 714         @smallexample.
 715
 716 2013-03-12  Sebastian Huber <sebastian.huber@embedded-brains.de>
 717
 718         * config/tc-nios2.c (nios2_consume_arg): Delete 'k' case.  Add 'o'
 719         case.  Add default BAD_CASE to switch.
 720
 721 2013-03-11  Sebastian Huber <sebastian.huber@embedded-brains.de>
 722
 723         * config/tc-nios2.c (nios2_assemble_args_ds): New function.
 724         (nios2_arg_info_structs): Add "d,s" and "d,s,E" entries.
 725
 726 2013-03-11  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>
 727
 728         * config/tc-arm.c (crc_ext_armv8): New feature set.
 729         (UNPRED_REG): New macro.
 730         (do_crc32_1): New function.
 731         (do_crc32b, do_crc32h, do_crc32w, do_crc32cb,
 732         do_crc32ch, do_crc32cw): Likewise.
 733         (TUEc): New macro.
 734         (insns): Add entries for crc32 mnemonics.
 735         (arm_extensions): Add entry for crc.
 736
 737 2013-03-08  Chung-Lin Tang  <cltang@codesourcery.com>
 738
 739         * write.h (struct fix): Add fx_dot_frag field.
 740         (dot_frag): Declare.
 741         * write.c (dot_frag): New variable.
 742         (fix_new_internal): Set fx_dot_frag field with dot_frag.
 743         (fixup_segment): Base calculation of fx_offset with fx_dot_frag.
 744         * expr.c (expr): Save value of frag_now in dot_frag when setting
 745         dot_value.
 746         * read.c (emit_expr): Likewise. Delete comments.
 747
 748 2013-03-07  H.J. Lu  <hongjiu.lu@intel.com>
 749
 750         * config/tc-i386.c (flag_code_names): Removed.
 751         (i386_index_check): Rewrote.
 752
 753 2013-03-05  Yufeng Zhang  <yufeng.zhang@arm.com>
 754
 755         * config/tc-aarch64.c (aarch64_imm_float_p): Rename 'e' to 'pattern';
 756         add comment.
 757         (aarch64_double_precision_fmovable): New function.
 758         (parse_aarch64_imm_float): Add parameter 'dp_p'; call the new
 759         function; handle hexadecimal representation of IEEE754 encoding.
 760         (parse_operands): Update the call to parse_aarch64_imm_float.
 761
 762 2013-02-28  H.J. Lu  <hongjiu.lu@intel.com>
 763
 764         * config/tc-i386.c (_i386_insn): Replace have_hle with hle_prefix.
 765         (check_hle): Updated.
 766         (md_assemble): Likewise.
 767         (parse_insn): Likewise.
 768
 769 2013-02-28  H.J. Lu  <hongjiu.lu@intel.com>
 770
 771         * config/tc-i386.c (_i386_insn): Add rep_prefix.
 772         (md_assemble): Check if REP prefix is OK.
 773         (parse_insn): Remove expecting_string_instruction.  Set
 774         i.rep_prefix.
 775
 776 2013-02-28  Yufeng Zhang  <yufeng.zhang@arm.com>
 777
 778         * config/tc-aarch64.c (aarch64_features): Add the 'crc' option.
 779
 780 2013-02-28  Yufeng Zhang  <yufeng.zhang@arm.com>
 781
 782         * config/tc-aarch64.c (parse_sys_reg): Allow the full range of CRn
 783         for system registers.
 784
 785 2013-02-27  DJ Delorie  <dj@redhat.com>
 786
 787         * config/tc-rl78.c (reloc_function): Add %code -> BFD_RELOC_RL78_CODE.
 788         (rl78_op): Handle %code().
 789         (rl78_cons_fix_new): Likewise, but ignore for 20-bit operands.
 790         (tc_gen_reloc): Likwise; convert to a computed reloc.
 791         (md_apply_fix): Likewise.
 792
 793 2013-02-25  Kaushik Phatak  <Kaushik.Phatak@kpitcummins.com>
 794
 795         * config/rl78-parse.y: Fix encoding of DIVWU insn.
 796
 797 2013-02-25  Terry Guo  <terry.guo@arm.com>
 798
 799         * config/tc-arm.c (arm_cpus): Add cortex-r7 entry.
 800         * doc/c-arm.texi: Add cortex-r7 and missing cortex-r5 to
 801         list of accepted CPUs.
 802
 803 2013-02-19  H.J. Lu  <hongjiu.lu@intel.com>
 804
 805         PR gas/15159
 806         * config/tc-i386.c (cpu_arch): Add ".smap".
 807
 808         * doc/c-i386.texi: Document smap.
 809
 810 2013-02-18  Maciej W. Rozycki  <macro@codesourcery.com>
 811
 812         * config/tc-mips.c (s_cpload): Call mips_mark_labels and set
 813         mips_assembling_insn appropriately.
 814         (s_cpsetup, s_cprestore, s_cpreturn, s_cpadd): Likewise.
 815
 816 2013-02-18  Maciej W. Rozycki  <macro@codesourcery.com>
 817
 818         * config/tc-mips.c (append_insn): Correct indentation, remove
 819         extraneous braces.
 820
 821 2013-02-15  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>
 822
 823         * config/tc-arm.c (do_neon_mov): Break on NS_NULL.
 824
 825 2013-02-15  Sebastian Huber  <sebastian.huber@embedded-brains.de>
 826
 827         * configure.tgt: Add nios2-*-rtems*.
 828
 829 2013-02-14  Yufeng Zhang  <yufeng.zhang@arm.com>
 830
 831         * config/tc-aarch64.c (md_begin): Change to check if 'name' is
 832         NULL.
 833
 834 2013-02-09  Jürgen Urban  <JuergenUrban@gmx.de>
 835
 836         * config/tc-mips.c (CPU_HAS_LDC1_SDC1): New macro.
 837         (macro): Use it.  Assert that trunc.w.s is not used for r5900.
 838
 839 2013-02-08  Yi-Hsiu, Hsu  <ahsu@marvell.com>
 840
 841         * gas/config/tc-arm.c (arm_cpus): Add support for mcpu=marvell-pj4
 842         core.
 843
 844 2013-02-06  Sandra Loosemore  <sandra@codesourcery.com>
 845             Andrew Jenner <andrew@codesourcery.com>
 846
 847         Based on patches from Altera Corporation.
 848
 849         * Makefile.am (TARGET_CPU_CFILES): Add config/tc-nios2.c.
 850         (TARGET_CPU_HFILES): Add config/tc-nios2.h.
 851         * Makefile.in: Regenerated.
 852         * configure.tgt: Add case for nios2*-linux*.
 853         * config/obj-elf.c: Conditionally include elf/nios2.h.
 854         * config/tc-nios2.c: New file.
 855         * config/tc-nios2.h: New file.
 856         * doc/Makefile.am (CPU_DOCS): Add c-nios2.texi.
 857         * doc/Makefile.in: Regenerated.
 858         * doc/all.texi: Set NIOSII.
 859         * doc/as.texinfo (Overview): Add Nios II options.
 860         (Machine Dependencies): Include c-nios2.texi.
 861         * doc/c-nios2.texi: New file.
 862         * NEWS: Note Altera Nios II support.
 863
 864 2013-02-06  Alan Modra  <amodra@gmail.com>
 865
 866         PR gas/14255
 867         * config/tc-avr.h (TC_VALIDATE_FIX): Mark symbol used by reloc.
 868         Don't skip fixups with fx_subsy non-NULL.
 869         * config/tc-avr.c (tc_gen_reloc): Don't specially handle fixups
 870         with fx_subsy non-NULL.
 871
 872 2013-02-04  H.J. Lu  <hongjiu.lu@intel.com>
 873
 874         * doc/c-metag.texi: Add "@c man" markers.
 875
 876 2013-02-04  Alan Modra  <amodra@gmail.com>
 877
 878         * write.c (fixup_segment): Return void.  Delete seg_reloc_count
 879         related code.
 880         (TC_ADJUST_RELOC_COUNT): Delete.
 881         * config/tc-i960.h (TC_ADJUST_RELOC_COUNT): Delete.
 882
 883 2013-02-04  Alan Modra  <amodra@gmail.com>
 884
 885         * po/POTFILES.in: Regenerate.
 886
 887 2013-01-30  Markos Chandras  <markos.chandras@imgtec.com>
 888
 889         * config/tc-metag.c: Make SWAP instruction less permissive with
 890         its operands.
 891
 892 2013-01-29  DJ Delorie  <dj@redhat.com>
 893
 894         * config/tc-rl78.c (rl78_cons_fix_new): Handle user-specified
 895         relocs in .word/.etc statements.
 896
 897 2013-01-29  Roland McGrath  <mcgrathr@google.com>
 898
 899         * config/tc-arm.c (md_apply_fix): Use as_bad_where for "bad
 900         immediate value for 8-bit offset" error so it shows line info.
 901
 902 2013-01-24  Joseph Myers  <joseph@codesourcery.com>
 903
 904         * config/tc-ppc.c (md_assemble): Do not generate APUinfo sections
 905         for 64-bit output.
 906
 907 2013-01-24  Nick Clifton  <nickc@redhat.com>
 908
 909         * config/tc-v850.c: Add support for e3v5 architecture.
 910         * doc/c-v850.texi: Mention new support.
 911
 912 2013-01-23  Nick Clifton  <nickc@redhat.com>
 913
 914         PR gas/15039
 915         * config/tc-avr.c: Include dwarf2dbg.h.
 916
 917 2013-01-18  H.J. Lu  <hongjiu.lu@intel.com>
 918
 919         * config/tc-i386.c (reloc): Support size relocation only for ELF.
 920         (tc_i386_fix_adjustable): Likewise.
 921         (lex_got): Likewise.
 922         (tc_gen_reloc): Likewise.
 923
 924 2013-01-17  Yufeng Zhang  <yufeng.zhang@arm.com>
 925
 926         * config/tc-aarch64.c (output_operand_error_record): Change to output
 927         the out-of-range error message as value-expected message if there is
 928         only one single value in the expected range.
 929         (programmer_friendly_fixup): Remove the handling of 8-bit MOVI with
 930         LSL #0 as a programmer-friendly feature.
 931
 932 2013-01-16  H.J. Lu  <hongjiu.lu@intel.com>
 933
 934         * config/tc-i386.c (reloc): Support BFD_RELOC_SIZE32.
 935         (tc_i386_fix_adjustable): Keep symbol for BFD_RELOC_32_SIZE and
 936         BFD_RELOC_64_SIZE relocations.
 937         (lex_got): Support "symbol@SIZE" and don't create GOT symbol
 938         for it.
 939         (tc_gen_reloc): Resolve BFD_RELOC_SIZE32 and BFD_RELOC_SIZE64
 940         relocations against local symbols.
 941
 942 2013-01-16  Alan Modra  <amodra@gmail.com>
 943
 944         * config/tc-ppc.c (md_assemble <TE_PE>): Ignore line after
 945         finding some sort of toc syntax error, and break to avoid
 946         compiler uninit warning.
 947
 948 2013-01-15  H.J. Lu  <hongjiu.lu@intel.com>
 949
 950         PR gas/15019
 951         * config/tc-i386.c (lex_got): Increment length by 1 if the
 952         relocation token is removed.
 953
 954 2013-01-15  Nick Clifton  <nickc@redhat.com>
 955
 956         * config/tc-v850.c (md_assemble): Allow signed values for
 957         V850E_IMMEDIATE.
 958
 959 2013-01-11  Sean Keys  <skeys@ipdatasys.com>
 960
 961         * config/tc-xgate.c (md_begin): Fix mistake made when going from
 962         git to cvs.
 963
 964 2013-01-10  Peter Bergner <bergner@vnet.ibm.com>
 965
 966         * doc/as.texinfo (Target PowerPC): Document -mpower8 and -mhtm.
 967         * doc/c-ppc.texi (PowerPC-Opts):  Likewise.
 968         * config/tc-ppc.c (md_show_usage): Likewise.
 969         (ppc_handle_align): Handle power8's group ending nop.
 970
 971 2013-01-10  Sean Keys  <skeys@ipdatasys.com>
 972
 973         * config/tc-xgate.c (md_begin): Fix the printing of opcodes so
 974         that the assember exits after the opcodes have been printed.
 975
 976 2013-01-10  H.J. Lu  <hongjiu.lu@intel.com>
 977
 978         * app.c: Remove trailing white spaces.
 979         * as.c: Likewise.
 980         * as.h: Likewise.
 981         * cond.c: Likewise.
 982         * dw2gencfi.c: Likewise.
 983         * dwarf2dbg.h: Likewise.
 984         * ecoff.c: Likewise.
 985         * input-file.c: Likewise.
 986         * itbl-lex.h: Likewise.
 987         * output-file.c: Likewise.
 988         * read.c: Likewise.
 989         * sb.c: Likewise.
 990         * subsegs.c: Likewise.
 991         * symbols.c: Likewise.
 992         * write.c: Likewise.
 993         * config/tc-i386.c: Likewise.
 994         * doc/Makefile.am: Likewise.
 995         * doc/Makefile.in: Likewise.
 996         * doc/c-aarch64.texi: Likewise.
 997         * doc/c-alpha.texi: Likewise.
 998         * doc/c-arc.texi: Likewise.
 999         * doc/c-arm.texi: Likewise.
1000         * doc/c-avr.texi: Likewise.
1001         * doc/c-bfin.texi: Likewise.
1002         * doc/c-cr16.texi: Likewise.
1003         * doc/c-d10v.texi: Likewise.
1004         * doc/c-d30v.texi: Likewise.
1005         * doc/c-h8300.texi: Likewise.
1006         * doc/c-hppa.texi: Likewise.
1007         * doc/c-i370.texi: Likewise.
1008         * doc/c-i386.texi: Likewise.
1009         * doc/c-i860.texi: Likewise.
1010         * doc/c-m32c.texi: Likewise.
1011         * doc/c-m32r.texi: Likewise.
1012         * doc/c-m68hc11.texi: Likewise.
1013         * doc/c-m68k.texi: Likewise.
1014         * doc/c-microblaze.texi: Likewise.
1015         * doc/c-mips.texi: Likewise.
1016         * doc/c-msp430.texi: Likewise.
1017         * doc/c-mt.texi: Likewise.
1018         * doc/c-s390.texi: Likewise.
1019         * doc/c-score.texi: Likewise.
1020         * doc/c-sh.texi: Likewise.
1021         * doc/c-sh64.texi: Likewise.
1022         * doc/c-tic54x.texi: Likewise.
1023         * doc/c-tic6x.texi: Likewise.
1024         * doc/c-v850.texi: Likewise.
1025         * doc/c-xc16x.texi: Likewise.
1026         * doc/c-xgate.texi: Likewise.
1027         * doc/c-xtensa.texi: Likewise.
1028         * doc/c-z80.texi: Likewise.
1029         * doc/internals.texi: Likewise.
1030
1031 2013-01-10  Roland McGrath  <mcgrathr@google.com>
1032
1033         * hash.c (hash_new_sized): Make it global.
1034         * hash.h: Declare it.
1035         * macro.c (define_macro): Use hash_new_sized instead of hash_new,
1036         pass a small size.
1037
1038 2013-01-10  Will Newton <will.newton@imgtec.com>
1039
1040         * Makefile.am: Add Meta.
1041         * Makefile.in: Regenerate.
1042         * config/tc-metag.c: New file.
1043         * config/tc-metag.h: New file.
1044         * configure.tgt: Add Meta.
1045         * doc/Makefile.am: Add Meta.
1046         * doc/Makefile.in: Regenerate.
1047         * doc/all.texi: Add Meta.
1048         * doc/as.texiinfo: Document Meta options.
1049         * doc/c-metag.texi: New file.
1050
1051 2013-01-09  Steve Ellcey  <sellcey@mips.com>
1052
1053         * config/tc-i386.c (md_begin): Remove 'internal Error' from as_fatal
1054         calls.
1055         * config/tc-mips.c (internalError): Remove, replace with abort.
1056
1057 2013-01-08  Yufeng Zhang  <yufeng.zhang@arm.com>
1058
1059         * config/tc-aarch64.c (parse_operands): Change to compare the result
1060         of function call 'parse_sys_reg' with 'PARSE_FAIL' instead of 'FALSE'.
1061
1062 2013-01-07  Nick Clifton  <nickc@redhat.com>
1063
1064         PR gas/14887
1065         * config/tc-arm.c (skip_past_char): Skip whitespace before the
1066         anticipated character.
1067         * config/tc-arm.c (parse_address_main): Delete skip of whitespace
1068         here as it is no longer needed.
1069
1070 2013-01-06  Andreas Schwab  <schwab@linux-m68k.org>
1071
1072         * doc/c-mips.texi (MIPS Opts): Fix use of @itemx.
1073         * doc/c-score.texi (SCORE-Opts): Likewise.
1074         * doc/c-tic54x.texi (TIC54X-Directives): Likewise.
1075
1076 2013-01-04  Juergen Urban <JuergenUrban@gmx.de>
1077
1078         * config/tc-mips.c: Add support for MIPS r5900.
1079         Add M_LQ_AB and M_SQ_AB to support large values for instructions
1080         lq and sq.
1081         (can_swap_branch_p, get_append_method): Detect some conditional
1082         short loops to fix a bug on the r5900 by NOP in the branch delay
1083         slot.
1084         (M_MUL): Support 3 operands in multu on r5900.
1085         (M_TRUNCWS): Support trunc.w.s on r5900 in MIPS ISA I.
1086         (s_mipsset): Force 32 bit floating point on r5900.
1087         (mips_ip): Check parameter range of instructions mfps and mtps on
1088         r5900.
1089         * configure.in: Detect CPU type when target string contains r5900
1090         (e.g. mips64r5900el-linux-gnu).
1091
1092 2013-01-02  H.J. Lu  <hongjiu.lu@intel.com>
1093
1094         * as.c (parse_args): Update copyright year to 2013.
1095
1096 2013-01-02  Yufeng Zhang  <yufeng.zhang@arm.com>
1097
1098         * config/tc-aarch64.c (aarch64_cpus): Add entries for "cortex-a53"
1099         and "cortex57".
1100
1101 2013-01-02  Nick Clifton  <nickc@redhat.com>
1102
1103         PR gas/14987
1104         * config/tc-arm.c (parse_address_main): Skip whitespace before a
1105         closing bracket.
1106
1107 For older changes see ChangeLog-2012
1108 \f
1109 Copyright (C) 2013 Free Software Foundation, Inc.
1110
1111 Copying and distribution of this file, with or without modification,
1112 are permitted in any medium without royalty provided the copyright
1113 notice and this notice are preserved.
1114
1115 Local Variables:
1116 mode: change-log
1117 left-margin: 8
1118 fill-column: 74
1119 version-control: never
1120 End: