[deliverable/binutils-gdb.git] / gas / ChangeLog

2005-11-14  Jan Beulich  <jbeulich@novell.com>

        * config/tc-ia64.c (md): Rename regsym to indregsym and move
        it to the end of the structure.
        (ar): Field regnum is unsigned.
        (cr): Likewise:
        (indirect_reg): Likewise.
        (declare_register_set): Parameter regnum is unsigned.
        (declare_register): Parameter numregs and base_regnum are
        unsigned. So is the local loop variable.
        (md_begin): Restrict scope of local variable regnum, which
        also is unsigned. Replace loops with function calls where
        possible. Re-order things so that register groups are kept
        together. Remove all uses of regsym except for indirect
        registers. Replace use of regsym by indregsym for indirect
        registers.
        (ia64_optimize_expr): Replace use of regsym by indregsym for
        indirect registers, with appropriate bias.

2005-11-14  David Ung  <davidu@mips.com>

        * config/tc-mips.c (mips16_ip): Add handling of 'm' and 'M' codes
        for the MIPS16e save/restore instructions.

2005-11-11  Jan Beulich  <jbeulich@novell.com>

        * doc/Makefile.am: Make asconfig.texi writeable before trying
        to write to it.
        * doc/Makefile.in: Refresh.

2005-11-10  Jan Beulich  <jbeulich@novell.com>

        * config/tc-i386.c (intel_e11): Don't special-case segment
        registers in brackets.

2005-11-10  Nick Clifton  <nickc@redhat.com>

        * config/tc-arm.c (BAD_ADDR_MODE): Define.
        (arm_reg_parse_multi): Return NULL rather than FAIL.
        (arm_reg_parse): Fix comment, the function returns FAIL rather
        than NULL if it is unable to parse the register name.
        (do_ldrex): Use BAD_ADDR_MODE.
        Change error message for PC-relative addressing.
        (do_strex): Likewise.
        (do_t_ldrex): Use BAD_ADDR_MODE.
        (do_t_strex): Likewise.

2005-11-08   Jean-Jacques Metayer  <jean-jacques.metayer@thomson.net>

        * config/tc-sparc.c (isoctal): Fix thinko.

2005-11-08  Arnold Metselaar  <arnold.metselaar@planet.nl>

        * expr.c (operand <case '$'>): Use DOLLAR_AMBIGU rather than
        flag_mri_m68k as condition for parsing the '$' as a prefix.
        * as.h (DOLLAR_AMBIGU): Define if needed.

2005-11-08  Nathan Sidwell  <nathan@codesourcery.com>

        Add ms2 support.
        * config/tc-ms1.c (ms1_mach_bitmask): Initialize to MS1.
        (ms1_architectures): Add ms2.
        (md_parse_option): Add ms2.
        (md_show_usage): Add ms2.
        (md_assemble): Add JAL_HAZARD detection logic.
        (md_cgen_lookup_reloc): Add MS1_OPERAND_LOOPSIZE case.
        * doc/c-ms1.texi: New.
        * doc/all.texi: Add MS1.
        * doc/Makefile.am (CPU_DOCS): Add c-ms1.texi.
        * doc/Makefile.in: Rebuilt.
        * doc/Makefile: Rebuilt.

2005-11-07  Steve Ellcey  <sje@cup.hp.com>

        * configure: Regenerate after modifying bfd/warning.m4.

2005-11-07  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>

        PR gas/1804
        * config/tc-hppa.c (md_apply_fix): Use number_to_chars_bigendian to
        output constant data.

2005-11-07  Mark Mitchell  <mark@codesourcery.com>

        * doc/Makefile.am (asconfig.texi): Set top_srcdir.
        * doc/Makefile.in: Regenerated.
        * doc/as.texinfo: Document "@FILE".

2005-11-07  Nick Clifton  <nickc@redhat.com>

        PR binutils/1568
        * config/obj-coff.c (obj_coff_section): Set readonly flag with the
        'x' attribute.  Remember the actions of the 'w' and 'n' attributes
        and do not allow the 'x','s' or 'd' attributes to change them.

2005-11-07  John Levon  <levon@movementarian.org>

        * config/tc-i386.h (tc_comment_chars): Define.
        * config/tc-i386.c (line_comment_chars): Use '/' unconditionally.
        (i386_comment_chars): Add.
        (md_parse_options): Process OPTION_DIVIDE.
        (md_show_usage): Describe --divide option.
        * doc/c-i386.texi: Document --divide option.

2005-11-07  Arnold Metselaar  <arnold.metselaar@planet.nl>

        * expr.c (op_encoding): Map '=' to O_SINGLE_EQ, if defined.
        * config/tc-z80.h: Define O_SINGLE_EQ as O_eq.

2005-11-07  Alan Modra  <amodra@bigpond.net.au>

        * macro.c (buffer_and_nest): Skip labels regardless of
        NO_PSEUDO_DOT and flag_m68k_mri.

2005-11-07  Arnold Metselaar  <arnold.metselaar@planet.nl>

        * expr.c (integer_constant): Match only 'B' as binary suffix if
        NUMBERS_WITH_SUFFIX and LOCAL_LABELS_FB.  Allow both 'b' and 'B'
        otherwise.

2005-11-04  Alexandre Oliva  <aoliva@redhat.com>

        * read.c (s_weakref): Do not permit redefinitions.
        * symbols.c (colon): Do not permit redefinitions of equated
        symbols.

2005-11-01  Thiemo Seufer  <ths@networkno.de>

        PR gas/1299
        * Makefile.am: Disable -Werror for the itbl-lex.o rule.
        * Makefile.in: Regenerate.

2005-11-01  Thiemo Seufer  <ths@networkno.de>

        * config/tc-mips.c (md_parse_option): Fix typo in comment.

2005-10-30  Mark Mitchell  <mark@codesourcery.com>

        * as.c (show_usage): Document "@FILE".

2005-10-30  H.J. Lu  <hongjiu.lu@intel.com>

        * Makefile.am (OBJ_FORMATS): Remove vms.
        Run "make dep-am".
        * Makefile.in: Regenerated.

        * dep-in.sed: Replace " ./" with " ".

2005-10-28  Dave Brolley  <brolley@redhat.com>

        Contribute the following change:
        2005-09-19  Dave Brolley  <brolley@redhat.com>

        * config/tc-m32c.c (default_isa): New static variable.
        (m32c_isa): Now of type CGEN_BITSET.
        (md_begin): Pass &m32c_isa to m32c_cgen_cpu_open.

2005-10-28  Paul Brook  <paul@codesourcery.com>

        * config/tc-arm.c (aeabi_set_public_attributes): Use selected_cpu
        instead of mcpu_cpu_opt.

2005-10-27  Sterling Augustine  <sterling@tensilica.com>

        * config/tc-xtensa.c (find_vinsn_conflicts): Change error messages to
        refer to "ports" instead of "queues".
        (check_t1_t2_reads_and_writes): Pass correct interface values to
        xtensa_interface_inout.

2005-10-27  Jan Beulich  <jbeulich@novell.com>

        * read.c (assign_symbol): Also consider equates already defined.
        * symbols.c (symbol_clone): Also clone the underlying BFD symbol.
        * config/obj-coff.h (obj_symbol_clone_hook): New.
        (coff_obj_symbol_clone_hook): Declare.
        * config/obj-coff.c (coff_obj_symbol_clone_hook): New.

2005-10-26  DJ Delorie  <dj@redhat.com>

        * config/tc-m32c.c (md_relax_table, subtype_mappings,
        md_convert_frag): Add jsr.w support.

        * config/tc-m32c.c (md_assemble): Don't use errmsg as the format
        itself.
        (md_cgen_lookup_reloc): Add m32c bitbase operands.  Add 8-s24
        and imm-8-HI operands.

2005-10-26  Paul Brook  <paul@codesourcery.com>

        * config/tc-arm.c (insns): Correct "sel" entry.

2005-10-26  Jan Beulich  <jbeulich@novell.com>

        * config/tc-i386.c (i386_operand): Don't check register prefix here.
        (parse_real_register): Rename from parse_register.
        (parse_register): New.
        (i386_parse_name): New.
        (md_operand): New.
        (intel_e11): Don't tolerate registers in offset expressions anymore.
        (intel_get_token): Don't check register prefix here. Copy the actual
        register token, not the canonical register name.
        * config/tc-i386.h (md_operand): Delete.
        (i386_parse_name): Declare.
        (md_parse_name): Define.

2005-10-25  Arnold Metselaar  <arnold.metselaar@planet.nl>

        * Makefile.am: Add Z80 cpu.
        * Makefile.in: Regenerated.
        * app.c (do_scrub_chars)<TC_Z80>: Correctly scrub "ex af,af'"
        and disallow newlines in quoted strings.
        * configure.tgt: Add z80-*-coff.
        * config/obj-coff.h: Add format "coff-z80".
        * doc/Makefile.am: Add c-z80.texi.
        * doc/Makefile.in: Regenerated.
        * doc/all.texi: Add Z80.
        * doc/c-z80.texi: New file
        * doc/as.texinfo: Add z80 options and some z80-related remarks.
        * config/tc-z80.c: New file
        * config/tc-z80.h: New file
        * NEWS: Mention new support.

2005-10-25  H.J. Lu  <hongjiu.lu@intel.com>

        * write.c (adjust_reloc_syms): Undo the change made on
        2005-04-26 to allow local symbol set to undefined symbol.

2005-10-24  H.J. Lu  <hongjiu.lu@intel.com>

        * Makefile.am (bfin-parse.tab.h): Removed.
        (bfin-parse.h): Added.
        * Makefile.in: Regenerated.

2005-10-25  Alan Modra  <amodra@bigpond.net.au>

        * po/POTFILES.in: Regenerate.
        * po/gas.pot: Regenerate.

2005-10-24  Bernd Schmidt  <bernd.schmidt@analog.com>

        * config/tc-bfin.c (Expr_Node_Gen_Reloc): If have symbol + constant,
        make a single reloc with an offset rather than a stack.
        * config/tc-bfin.h (MD_APPLY_SYM_VALUE): Define to 0.

2005-10-24  Alexandre Oliva  <aoliva@redhat.com>

        * read.c (potable): Add weakref.
        (s_weakref): New.
        * read.h (s_weakref): Declare.
        * struc-symbol.h (struct symbol): Add sy_weakrefr and sy_weakrefd.
        * symbols.c (colon): Clear weakrefr.
        (symbol_find_exact): Rename to, and reimplement in terms of...
        (symbol_find_exact_noref): ... new function.
        (symbol_find): Likewise...
        (symbol_find_noref): ... ditto.
        (resolve_symbol_value): Resolve weakrefr without setting their
        values.
        (S_SET_WEAK): Call hook.
        (S_GET_VALUE): Follow weakref link.
        (S_SET_VALUE): Clear weakrefr.
        (S_IS_WEAK): Follow weakref link.
        (S_IS_WEAKREFR, S_SET_WEAKREFR, S_CLEAR_WEAKREFR): New.
        (S_IS_WEAKREFD, S_SET_WEAKREFD, S_CLEAR_WEAKREFD): New.
        (symbol_set_value_expression, symbol_set_frag): Clear weakrefr.
        (symbol_mark_used): Follow weakref link.
        (print_symbol_value_1): Print weak, weakrefr and weakrefd.
        * symbols.h (symbol_find_noref, symbol_find_exact_noref): Declare.
        (S_IS_WEAKREFR, S_SET_WEAKREFR, S_CLEAR_WEAKREFR): Declare.
        (S_IS_WEAKREFD, S_SET_WEAKREFD, S_CLEAR_WEAKREFD): Declare.
        * write.c (adust_reloc_syms): Follow weakref link.  Do not
        complain if target is undefined.
        (write_object_file): Likewise.  Remove weakrefr symbols.  Drop
        unreferenced weakrefd symbols.
        * config/obj-coff.c (obj_frob_symbol): Do not force WEAKREFD
        symbols EXTERNAL.
        (pecoff_obj_set_weak_hook, pecoff_obj_clear_weak_hook): New.
        * config/obj-coff.h (obj_set_weak_hook, obj_clear_weak_hook): Define.
        * doc/as.texinfo: Document weakref.
        * doc/internals.texi: Document new struct members, internal
        functions and hooks.

2005-10-24  Jie Zhang  <jie.zhang@analog.com>

        * Makefile.am (bfin-parse.h): Renamed from bfin-parse.tab.h.
        (EXTRA_DIST): Add bfin-parse.h and bfin-lex.c.
        * Makefile.in: Regenerate.
        * config/bfin-lex.l: Include bfin-parse.h instead of bfin-parse.tab.h.
        * config/tc-bfin.c (md_chars_to_number): Change the type of first
        argument from unsigned char * to char * to remove signedness warnings.

2005-10-24  Jan Beulich  <jbeulich@novell.com>

        * config/tc-ia64.c (enum reg_symbol): Delete IND_MEM.
        (dot_rot): Change type of num_* variables. Check for positive count.
        (ia64_optimize_expr): Re-structure.
        (md_operand): Check for general register.

2005-10-24  Jan Beulich  <jbeulich@novell.com>

        * config/tc-ia64.c (declare_register): Call symbol_create.
        (md_begin): Remove local variables total, ar_base, and cr_base.
        Start loops for registers at their respective first one. Don't
        update md.regsym for alias names. Generate alias name tp for r13.

2005-10-21  DJ Delorie  <dj@redhat.com>

        * config/tc-m32c.c (md_cgen_lookup_reloc): Add more relocs.  Print
        names unstead of numbers.

2005-10-19  David Ung  <davidu@mips.com>

        * config/tc-mips.c (append_insn): Convert MIPS16 jr/jalr jumps
        into jrc/jalrc versions if ISA_MIPS32+ and not doing the swap,
        hence avoiding to emit a nop.

2005-10-19  Jie Zhang  <jie.zhang@analog.com>

        * config/tc-bfin.c (md_begin): Let the lex_type of '(' be
        LEX_BEGIN_NAME.
        (bfin_start_line_hook): Remove the workaround for LSETUP(.
        (bfin_name_is_register): Remove the workarounds for LSETUP(
        and SAA(.
        (bfin_start_label): Ditto.

2005-10-18  Bob Wilson  <bob.wilson@acm.org>

        * config/tc-xtensa.c (xtensa_end_directive): Restore
        default_lit_sections regardless of use_literal_section.

2005-10-18  Jie Zhang  <jie.zhang@analog.com>

        * Makefile.am (bfin-lex.c): Update ylwrap invocation.
        * Makefile.in: Regenerated.

2005-10-18  Arnold Metselaar  <arnold.metselaar@planet.nl>

        * doc/as.texinfo (.loc) Fix placement of '@end table'.

2005-10-17  Bob Wilson  <bob.wilson@acm.org>

        * config/xtensa-istack.h (TInsn): Replace dwarf2_line_info with an
        unsigned line number.  Do not include "dwarf2dbg.h".
        * config/tc-xtensa.c (md_pseudo_table): Remove entry for "loc".
        (xtensa_dwarf2_directive_loc, xtensa_dwarf2_emit_insn): Delete.
        (xg_build_to_insn, xg_build_token_insn): Update TInsn uses.
        (md_assemble): Use as_where instead of dwarf2_where.
        (xg_assemble_vliw_tokens): Use unsigned line numbers instead of
        dwarf2_line_infos.  Change to call new_logical_line followed by
        dwarf2_emit_insn.

2005-10-14  Mike Frysinger <vapier@gentoo.org>

        * doc/as.texinfo (Section): Add missing ']' to .section example.

2005-10-12  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>

        PR binutils/941
        * config/tc-hppa.c (pa_ip): Use as_bad instead of as_fatal when an
        unknown opcode is found.

2005-10-12  Mark Mitchell  <mark@codesourcery.com>

        * NEWS: Mention @file.

2005-10-12  Nick Clifton  <nickc@redhat.com>

        * config/tc-avr.c: Convert to ISO C90 format.  Fix formatting and
        generally tidy up the code.
        * config/tc-avr.h: Likewise.

2005-10-12  Jan Beulich  <jbeulich@novell.com>

        * config/tc-ia64.c (dot_reg_val): Use expression_and_evaluate.
        (dot_pred_rel): Likewise.
        (parse_operand): Likewise.
        (ia64_unrecognized_line): Likewise.
        (md_operand): Likewise.

2005-10-11  Jan Beulich  <jbeulich@novell.com>

        * expr.h (enum expr_mode): New.
        (expression): Pass third argument to expr.
        (expression_and_evaluate): New.
        (deferred_expression): New.
        (expr): Add third parameter.
        (resolve_expression): New.
        * struc-symbol.h (struct symbol): New members sy_volatile and
        sy_forward_ref.
        * symbols.c, symbols.h (symbol_clone): New.
        (symbol_clone_if_forward_ref): New.
        (snapshot_symbol): New.
        (S_IS_VOLATILE): New.
        (S_IS_FORWARD_REF): New.
        (S_SET_VOLATILE): New.
        (S_SET_FORWARD_REF): New.
        * as.c (macro_expr): Use expression_and_evaluate.
        * cond.c (s_if): Likewise.
        (s_elseif): Likewise.
        * dw2gencfi.c (cfi_parse_reg): Likewise.
        * expr.c (operand): Add second parameter. Optionally call
        deferred_expression. Pass mode argument to itself and md_parse_name.
        Check mode before trying to evaluate symbol. Call
        symbol_clone_if_forward_ref for both operands.
        (expr): Add third parameter. Pass mode to operand and itself.
        Optionally call resolve_expression.
        (resolve_expression): New.
        (get_single_number): Pass second argument to operand.
        * read.c (potable): New entry for .eqv.
        (read_a_source_file): Handle new == operator.
        (get_absolute_expr): Use expression_and_evaluate.
        (s_lsym): Likewise.
        (assign_symbol): Rename second parameter. Call symbol_clone on
        legal and illegal redefinition. Call S_SET_VOLATILE and
        S_SET_FORWARD_REF depending on mode.
        (s_set): Update description.
        (s_space): Call resolve_expression.
        (pseudo_set): Optionally call deferred_expression. Check
        S_IS_FORWARD_REF before trying to simplify/resolve an expression.
        (equals): Handle ==.
        * config/tc-ia64.h (md_parse_name): Add mode parameter.
        * config/tc-arc.c (arc_parse_cons_expression): Likewise.
        * config/tc-m32r.h (md_parse_name): Likewise.
        (m32r_parse_name): Likewise.
        * config/tc-mmix.h (md_parse_name): Likewise.
        * config/tc-mn10300.h (md_parse_name): Likewise.
        (mn10300_parse_name): Likewise.
        * config/tc-ppc.h (md_parse_name): Likewise.
        * config/tc-sh.h (md_parse_name): Likewise.
        (sh_parse_name): Likewise.
        * config/tc-sh64.h (md_parse_name): Likewise.
        (sh64_consume_datalabel): Likewise.
        * config/tc-tic54x.h (md_parse_name): Likewise.
        * config/tc-m32r.c (m32r_parse_name): Add mode parameter. Check it
        before trying to evaluate symbol.
        * config/tc-mn10300.c (mn10300_parse_name): Likewise.
        * config/tc-sh.c (sh_parse_name): Likewise.
        * config/tc-sh64.c (sh64_consume_datalabel): Add mode parameter. Pass
        second argument to operandf. Pass mode parameter to sh_parse_name.
        * doc/as.texinfo: Document .eqv and the == assignment operator.

2005-10-10  Ian Lance Taylor  <ian@airs.com>

        * Makefile.am (EXTRA_DIST): Remove bfin-lex.l and bfin-defs.h.
        * Makefile.in: Regenerate.

2005-10-10  Arnold Metselaar  <arnold.metselaar@planet.nl>

        * expr.c (operator): Allow "!=" as a synonym for "<>".
        * doc/as.texinfo (Infix Op): Mention "!=".

2005-10-08  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>

        * config/tc-hppa.c (strict): Don't initialize.  Update comment.
        (pa_ip): Promote from PA 1.0 to 1.1 immediately when 1.1 match is
        found.  Simplify handling of "ma" and "mb" completers.

2005-10-08  Paul Brook  <paul@codesourcery.com>

        * config/tc-arm.c: Don't provide fallback default for CPU_DEFAULT.
        (arm_arch_used, thumb_arch_used, selected_cpu, selected_cpu_name):
        New variables.
        (arm_cpu_option_table): Add canonical_name.
        (arm_cpus): Populate canonical_name field.
        (s_arm_eabi_attribute, s_arm_arch, s_arm_cpu, s_arm_fpu,
        aeabi_set_public_attributes, arm_md_end): New functions.
        (md_pseudo_table): Add "cpu", "arch", "fpu" and "eabi_attribute".
        (md_assemble): Set thumb_arch_used and arm_arch_used.
        (md_begin): Set defaut cpu if CPU_DEFAULT not defined.
        * config/tc-arm.h (md_end): Define.
        * doc/c-arm.texi: Document .cpu, .arch, .fpu and .eabi_attribute.

2005-10-06  Khem Raj  <kraj@mvista.com>
            NIIBE Yutaka  <gniibe@m17n.org>

        * config/tc-sh.c (allow_dollar_register_prefix): New variable.
        (parse_reg_without_prefix): New function.
        (parse_reg): Check for '$' register prefix if --allow-reg-prefix is
        set.
        (option md_longopts): Add allow-reg-prefix option.
        * doc/c-sh.texi: Document --allow-reg-prefix option.
        * NEWS: Mention the new switch.

2005-10-03  Arnold Metselaar  <arnold.metselaar@planet.nl>

        * doc/as.texinfo (Infix Ops):  '<' and '>' are not shift
        operators.

2005-09-30  Sterling Augustine  <sterling@tensilica.com>
            Bob Wilson  <bob.wilson@acm.org>

        * config/tc-xtensa.c (xtensa_frob_label): Disallow labels in bundles.

2005-09-30  H.J. Lu  <hongjiu.lu@intel.com>

        * Makefile.am: Run "make dep-am".
        * Makefile.in: Regenerated.
        * aclocal.m4: Likewise.

2005-09-30  Mark Mitchell  <mark@codesourcery.com>

        * as.c (main): Use expandargv.

2005-09-30  Jan Beulich  <jbeulich@novell.com>

        * config/tc-tic4x.c (tic4x_set): Advance input_line_pointer past
        (removed) comma.

2005-09-30  Catherine Moore  <clm@cm00re.com>

        * Makefile.am: Bfin support.
        * Makefile.in: Regenerated.
        * aclocal.m4: Regenerated.
        * configure: Regenerated.
        * configure.in: Bfin support.
        * configure.tgt: Bfin support.
        * config/bfin-aux.h: New file.
        * config/bfin-defs.h: New file.
        * config/bfin-lex.l: New file.
        * config/bfin-parse.y: New file.
        * config/tc-bfin.c: New file.
        * config/tc-bfin.h: New file.
        * doc/Makefile.am: Recognize c-bfin.texi.
        * doc/Makefile.in: Regenerated.
        * doc/all.texi: Bfin support.
        * doc/as.texinfo: Likewise.
        * doc/c-bfin.texi: Document bfin-specific syntax and
        directives.

2005-09-30  Paul Brook  <paul@codesourcery.com>

        * config/tc-arm.c (opcode_tag): Add OT_cinfix3_legacy.
        (opcode_lookup): Handle OT_cinfix3_legacy.  Revert earlier change for
        normal infix conditions.
        (C3E): Include Thumb-2 definition.
        (CL, cCL): Define.
        (insns): Use them for legacy mnemonics.

2005-09-30  Matthias Kurz  <mk@baerlap.north.de>

        * asintl.h: Prevent the inclusion of <libintl.h> from the Solaris
        version of <locale.h> when ENABLE_NLS is not defined.

2005-09-29  Jan Beulich  <jbeulich@novell.com>

        * config/tc-ia64.c (parse_operands): Always parse first operand of
        alloc.

2005-09-29  Arnold Metselaar <arnold.metselaar@planet.nl>
            Alan Modra  <amodra@bigpond.net.au>

        * app.c (do_scrub_chars): Match open and close quote of strings.
        Remove redundant EOF test in case 7.

2005-09-28  Jan Beulich  <jbeulich@novell.com>

        * config/tc-i386.c (reloc): Disable signedness check for 4-byte
        relocations in 16- and 32-bit modes.
        (i386_displacement): Make pc-relative branch handling dependent
        upon operand (rather than address) size.

2005-09-28  Jan Beulich  <jbeulich@novell.com>

        * dw2gencfi.c (dot_cfi): Call ignore_rest_of_line when not fully
        parsing the input.
        (dot_cfi_startproc): Likewise.
        (dot_cfi_endproc): Likewise. Also check no extra input was given.
        (dot_cfi_escape): Likewise.

2005-09-28  Jan Beulich  <jbeulich@novell.com>

        * config/tc-i386.h (x86_cons_fix_new): Declare unconditionally.
        (TC_CONS_FIX_NEW): Define unconditionally.
        (x86_pe_cons_fix_new): Remove.
        * config/tc-i386.c (signed_cons): New.
        (md_pseudo_table): Add slong.
        (x86_cons_fix_new): Declare unconditionally.
        (x86_pe_cons_fix_new): Merge into x86_cons_fix_new.
        (tc_gen_reloc): Also consider BFD_RELOC_X86_64_32S for gotpc
        conversion.

2005-09-28  Arnold Metselaar  <arnold.metselaar@planet.nl>

        * app.c (do_scrub_chars <LEX_IS_SYMBOL_COMPONENT>): Check for full
        buffer after copying string.

2005-09-27  Paul Brook  <paul@codesourcery.com>

        * config/arm.c (arm_cpus): Add more cpu names.
        * doc/c-arm.texi: Document them.

2005-09-21  Alan Modra  <amodra@bigpond.net.au>

        * read.c (pseudo_set): Don't set undefined symbols to expr_section.

2005-09-20  Richard Henderson  <rth@redhat.com>

        * dwarf2dbg.c (process_entries): Fix uninitialized variable warning.

2005-09-20  Richard Henderson  <rth@redhat.com>

        * dwarf2dbg.c (struct line_entry): Replace frag and frag_ofs
        with label.
        (dwarf2_loc_mark_labels): New.
        (dwarf2_gen_line_info_1): Split out of ...
        (dwarf2_gen_line_info): ... here.  Create the temp symbol here.
        (dwarf2_emit_label): New.
        (dwarf2_directive_loc_mark_labels): New.
        (out_set_addr): Take a symbol instead of frag+ofs.
        (relax_inc_line_addr): Likewise.
        (emit_inc_line_addr): Assert delta non-negative.
        (process_entries): Remove dead code.  Update to work with temp
        symbols instead of frag+ofs.
        * dwarf2dbg.h (dwarf2_directive_loc_mark_labels): Declare.
        (dwarf2_emit_label, dwarf2_loc_mark_labels): Declare.
        * config/obj-elf.c (elf_pseudo_tab): Add loc_mark_labels.
        * config/obj-elf.h (obj_frob_label): New.
        * config/tc-alpha.c (alpha_define_label): Call dwarf2_emit_label.
        * config/tc-arm.c, config/tc-hppa.c, config/tc-m68k.c,
        config/tc-mips.c, config/tc-ppc.c, config/tc-sh.c, config/tc-xtensa.c:
        Similarly in the respective tc_frob_label implementation functions.
        * config/tc-i386.c (md_pseudo_table): Move file and loc to
        non-elf section; add loc_mark_labels.
        * config/tc-ia64.c (struct label_fix): Add dw2_mark_labels.
        (ia64_flush_insns): Check for marked labels; emit line entry if so.
        (emit_one_bundle): Similarly.
        (ia64_frob_label): Record marked labels.
        * config/tc-m68hc11.h (tc_frob_label): Remove.
        * config/tc-ms1.c (md_pseudo_table): Remove file and loc.
        * config/tc-sh.h (tc_frob_label): Pass sym to sh_frob_label.
        * config/tc-sh64.h (tc_frob_label): Likewise.
        * doc/as.texinfo (LNS directives): Docuement .loc_mark_blocks.

2005-09-20  Alan Modra  <amodra@bigpond.net.au>

        * read.c (pseudo_set): Set segment of expression syms to expr_section.

2005-09-14  Jan Beulich  <jbeulich@novell.com>

        * config/tc-i386.c (tc_x86_regname_to_dw2regnum): Add selector
        registers, floating point control and status words, and mxcsr as
        well as (for 64-bit code) segment base registers and rflags.

2005-09-09  Dmitry Diky  <diwil@spec.ru>

        * config/tc-msp430.c (msp430_operands): Undo last changes. Instead...
        (msp430_relax_frag): add a guard check to ensure that final fr_subtype
        has been reached.

2005-09-08  Chao-ying Fu  <fu@mips.com>

        * doc/as.texinfo: Document -mdsp and -mno-dsp options.
        * doc/c-mips.texi: Likewise, and document ".set dsp" and ".set nodsp"
        directives.

2005-09-08  Paul Brook  <paul@codesourcery.com>

        * config/tc-arm.c (do_smi, do_t_smi): Rename ...
        (do_smc, do_t_smc): ... to this.
        (insns): Remane smi to smc.
        (md_apply_fix, tc_gen_reloc): Rename BFD_RELOC_ARM_SMI to
        BFD_RELOC_ARM_SMC.

2005-09-07  Richard Henderson  <rth@redhat.com>

        * dwarf2dbg.c (dwarf2_where): Set line->isa.
        (dwarf2_set_isa): New.
        (dwarf2_directive_loc): Rearrange to allow all options on one line.
        * dwarf2dbg.h (dwarf2_set_isa): Declare.
        * doc/as.texinfo: Update .loc documentation.

2005-09-07  Richard Henderson  <rth@redhat.com>

        * dwarf2dbg.c: Include safe-ctype.h.
        (DWARF2_LINE_OPCODE_BASE): Bump to 13.
        (current): Initialize.
        (dwarf2_emit_insn): Clear DWARF2_FLAG_BASIC_BLOCK,
        DWARF2_FLAG_PROLOGUE_END, DWARF2_FLAG_EPILOGUE_BEGIN.
        (dwarf2_directive_file): Cope with invalid filename.
        (dwarf2_directive_loc): Add handling for basic_block, prologue_end,
        epilogue_begin, is_stmt, isa.
        (emit_inc_line_addr): Move line_delta == 0, addr_delta == 0 special
        case down lower.
        (process_entries): Handle isa, DWARF2_FLAG_PROLOGUE_END,
        and DWARF2_FLAG_EPILOGUE_BEGIN.
        (out_debug_line): Emit sizes for DW_LNS_set_prologue_end,
        DW_LNS_set_epilogue_begin, DW_LNS_set_isa.
        * dwarf2dbg.h (DWARF2_FLAG_IS_STMT): Rename from DWARF2_FLAG_BEGIN_STMT.
        (DWARF2_FLAG_BASIC_BLOCK): Rename from DWARF2_FLAG_BEGIN_BLOCK.
        (DWARF2_FLAG_PROLOGUE_END, DWARF2_FLAG_EPILOGUE_BEGIN): New.
        (struct dwarf2_line_info): Add isa member.
        * doc/as.texinfo (LNS directives): New node.

2005-09-07  David Ung  <davidu@mips.com>

        * config/tc-mips.c (append_insn): Undo last change.  Instead add
        guard to suppress calling frag_grow if the current instruction is
        one that allows a delay slot.

2005-09-06  Chao-ying Fu  <fu@mips.com>

        * config/tc-mips.c (mips_set_options): Add ase_mt for MT instructions.
        (mips_opts): Add -1 to initialize ase_mt.
        (file_ase_mt): New variable for -mmt.
        (CPU_HAS_MT): New define.
        (validate_mips_insn): Add supports for +t, +T, !, $, *, &, g operand
        formats.
        (mips_ip): Check ase_mt to enable MT instructions.
        Handle !, $, *, &, +T, +t, g operand formats.
        For "mftc1", "mfthc1", "cftc1", "mttc1", "mtthc1", "cttc1", we allow
        odd float registers.
        (OPTION_MT, OPTION_NO_MT): New define.
        (OPTION_COMPAT_ARCH_BASE): Change because of inserting MT define.
        (md_parse_option): Parse OPTION_MT and OPTION_NO_MT.
        (mips_after_parse_args): Set ase_mt based on CPU.
        (s_mipsset): Handle ".set mt" and ".set nomt".
        (mips_elf_final_processing): Remind of adding new flag for MT ASE.
        (md_show_usage): Show usage of -mmt and -mno-mt.
        * doc/as.texinfo: Document -mmt and -mno-mt options.
        * doc/c-mips.texi: Likewise, and document ".set mt" and ".set nomt"
        directives.

2005-09-06  Paul Brook  <paul@codesourcery.com>

        * config/tc-arm.c (arm_it): Add relax field.
        (T16_32_TAB): Add addi, addis, add_pc, add_sp, dec_sp, inc_sp,
        b, bcond, ldr_pc, ldr_pc2, ldr_sp, str_sp, subi, subis.
        (do_t_add_sub, do_t_addr, do_t_branch, do_t_ldst,
        do_t_mov_cmp): Allow relaxation.
        (output_relax_insn): New function.
        (put_thumb32_insn): New function.
        (output_inst): Use new functions.
        (md_assemble): Don't throw error on relaxable instructions.
        (insns): Change "b" entry from TCE(...) to tCE(...).
        (md_estimate_size_before_relax): Return 2.
        (md_convert_frag, relax_immediate, relax_adr, relax_addsub,
        relax_branch, arm_relax_frag): New functions.
        (arm_force_relocation): Return 0 for Thumb-2 immediate operand
        relocations.
        * config/tc-arm.h (md_convert_frag): Remove definition.
        (md_relax_frag): Define.
        (arm_relax_frag): Add prototype.

2005-09-02  Paul Brook  <paul@codesourcery.com>

        * config/tc-arm.c (do_rn_rd): Enforce SWP operand constraints.

2005-09-02  Paul Brook  <paul@codesourcery.com>

        * config/tc-arm.c (encode_arm_cp_address): Use
        BFD_RELOC_ARM_T32_CP_OFF_IMM in thumb mode.
        (do_iwmmxt_wldstbh): Use BFD_RELOC_ARM_T32_CP_OFF_IMM_S2 in thumb
        mode.
        (md_assemble): Only allow coprocessor instructions when Thumb-2 is
        available.
        (cCE, cC3): Define.
        (insns): Use them for coprocessor instructions.
        (md_pcrel_from_section): Handle BFD_RELOC_ARM_T32_CP_OFF_IMM.
        (get_thumb32_insn): New function.
        (put_thumb32_insn): New function.
        (md_apply_fix): Handle BFD_RELOC_ARM_T32_CP_OFF_IMM and
        BFD_RELOC_ARM_T32_CP_OFF_IMM_S2.

2005-09-02  Paul Brook  <paul@codesourcery.com>

        * config/tc-arm.c (opcode_lookup): Look for infix opcode when
        incorrect suffix matches.

2005-09-01  David Ung  <davidu@mips.com>

        * config/tc-mips.c (append_insn): Correctly handle mips16 case
        when the frags are different for the 2 instructions we want to
        swap.  If the lengths of the 2 instructions are not the same, we
        won't do the swap but emit an nop.

2005-09-01  Dmitry Diky  <diwil@spec.ru>

        * config/tc-msp430.c (msp430_operands): Emit dwarf2_emit_insn()
        as appropriate. Change frag_variant() to frag_var() for relaxes.

2005-08-29  Nick Clifton  <nickc@redhat.com>

        * write.c (generic_force_reloc): Do not call S_FORCE_RELOC if
        there is no symbol.

2005-08-26  Jan Beulich  <jbeulich@novell.com>

        * config/tc-i386.c (intel_e09): Set JumpAbsolute when seeing a PTR-
        qualified operand of a branch.
        (intel_bracket_expr): Set JumpAbsolute here...
        (intel_e11): ... rather than here.

2005-08-26  Christian Groessler  <chris@groessler.org>

        * configure.tgt: Set bfd_gas also for z8k cpu.
        * config/tc-z8k.c (s_segm): Use bfd_set_arch_mach to set machine
        type.
        (newfix): Adapt to bfd reloc types.
        (build_bytes): Adapt to bfd reloc types.  Ensure that enough space
        is available in the current frag.
        (md_convert_frag): Adapt function parameters.
        (tc_gen_reloc): New function.
        (md_section_align): Use bfd_get_section_alignment.
        (md_apply_fix): Adapt to bfd reloc types.  Fix handling of
        BFD_RELOC_Z8K_IMM4L, BFD_RELOC_8, BFD_RELOC_16, and BFD_RELOC_32
        relocations.
        * config/tc-z8k.h (TARGET_ARCH): Define.
        (tc_fix_adjustable): Define.

2005-08-25  Chao-ying Fu  <fu@mips.com>

        * config/tc-mips.c (mips_set_options): Add ase_dsp for DSP instructions.
        (mips_opts): Add -1 to initialize ase_dsp.
        (file_ase_dsp): New variable for -mdsp.
        (CPU_HAS_DSP): New define.
        (validate_mips_insn): Add supports for 3, 4, 5, 6, 7, 8, 9, 0, ', :, @
        operand formats.
        (mips_ip): Add min_range and max_range for checking singed numbers.
        Check ase_dsp to enable DSP instructions.
        Handle 3, 4, 5, 6, 7, 8, 9, 0, ', :, @ operand formats.
        (OPTION_DSP, OPTION_NO_DSP): New define.
        (OPTION_COMPAT_ARCH_BASE): Change because of inserting DSP define.
        (md_parse_option): Parse OPTION_DSP and OPTION_NO_DSP.
        (mips_after_parse_args): Set ase_dsp based on CPU.
        (s_mipsset): Handle ".set dsp" and ".set nodsp".
        (mips_elf_final_processing): Remind of adding new flag for DSP ASE.
        (md_show_usage): Show usage of -mdsp and -mno-dsp.

2005-08-23  David Ung  <davidu@mips.com>

        * config/tc-mips.c (mips_cpu_info_table): Add 5kf to the table of
        cpu names.

2005-08-23  Alan Modra  <amodra@bigpond.net.au>

        PR 1036
        * config/tc-ppc.c (ppc_symbol_chars): Add '%' and '['.

2005-08-23  Phil Edwards  <phil@codesourcery.com>

        * configure.tgt (*-*-vxworks):  Match vxworks* instead.

2005-08-22  Jan Beulich  <jbeulich@novell.com>

        * config/tc-i386.c (object_64bit): New.
        (i386_target_format): Initialize it.
        (output_disp): Use object_64bit for relocation type determination.
        (output_imm): Likewise.
        (i386_validate_fix): Likewise.
        (tc_gen_reloc): Likewise.
        (lex_got): Likewise. Remove static mode_name. Change array size
        of gotrel's rel field, and adjust its initializer. Adjust diagnostic.
        (x86_cons): Use object_64bit for deciding whether quad fields can
        have relocations.

2005-08-18  Christian Groessler  <chris@groessler.org>

        * config/tc-h8300.h: Remove TC_RELOC_MANGLE/tc_reloc_mangle.
        * config/tc-mcore.h: Likewise.
        * config/tc-z8k.h: Likewise.
        * config/tc-z8k.c: Likewise.
        * config/tc-sh.h: Remove TC_RELOC_MANGLE and
        sh_coff_reloc_mangle declaration.
        * config/tc-sh.c: (md_apply_fix): Fix comment for case
        BFD_RELOC_SH_USES.

2005-08-18  Kaz Kojima  <kkojima@rr.iij4u.or.jp>

        * config/tc-sh64.c (sh64_target_format): Check preset_target_arch
        to confirm that no ISA is specified.

2005-08-18  Nick Clifton  <nickc@redhat.com>

        * write.c (relax_segment): Count the number of frags being
        processed and use this to compute a maximum limit on the number of
        iterations that will be allowed when attempting to relax the
        segment.

2005-08-17  Danny Smith  <dannysmith@users.sourceforge.net>

        * config/obj-coff.c (obj_coff_weak): Set auxiliary record
        of NT weak externals to IMAGE_WEAK_EXTERN_SEARCH_NOLIBRARY.

2005-08-16  Alan Modra  <amodra@bigpond.net.au>

        * config/tc-ppc.c (ppc_set_cpu): Don't select 64-bit based on
        default cpu.

2005-08-15  Paul Brook  <paul@codesourcery.com>

        * config/tc-arm.c (do_t_mov_cmp): Fix encoding of i16-bit conditional
        instructions.
        (do_t_mvn_tst, do_t_neg, do_t_shift): Ditto.

2005-08-15  Daniel Jacobowitz  <dan@codesourcery.com>

        * config/tc-ppc.c (parse_cpu): Add -me300 support.
        (md_show_usage): Likewise.
        * doc/c-ppc.texi (PowerPC-Opts): Document it.

2005-08-12 Martin Schwidefsky  <schwidefsky@de.ibm.com>

        * config/tc-s390.c (md_parse_option):  Add cpu type z9-109.
        (md_gather_operands): Add support for optional operands.

2005-08-12  Dmitry Diky <diwil@spec.ru>
        * config/tc-msp430.c (msp430_enable_relax): New flag.
        (msp430_enable_polys): Likewise.
        (OPTION_RELAX): New option.
        (OPTION_POLYMORPHS): Likewise.
        (md_longopts): New long options.
        (md_show_usage): Updated.
        (md_parse_option): Add new options handler.
        (msp430_operands): Add check if polymorph insns are enabled.
        (msp430_force_relocation_local): New function.
        (md_apply_fix): Now delete relocs according to new flags combination.
        (msp430_relax_frag): Convert long branches to short branches only if
        flag msp430_enable_relax is set.
        * config/tc-msp430.h (TC_FORCE_RELOCATION_LOCAL): Defined.
        (msp430_force_relocation_local): Likewise.
        * doc/c-msp430.texi: Describe new options.

2005-08-11  Ian Lance Taylor  <ian@airs.com>

        * Makefile.am ($(srcdir)/make-gas.com): Remove target.
        (stamp-mk.com): Likewise.
        (EXTRA_DIST): Remove make-gas.com from list.
        (MOSTLYCLEANFILES): Remove stamp-mk.com from list.
        * Makefile.in: Regenerate.

2005-08-11  Hans-Peter Nilsson  <hp@axis.com>

        * subsegs.c (subseg_change): Move declaration of seginfo to before
        first statement.

2005-08-11  Alan Modra  <amodra@bigpond.net.au>

        * README-vms: Delete.
        * config-gas.com: Delete.
        * makefile.vms: Delete.
        * vmsconf.sh: Delete.
        * config/atof-tahoe.c: Delete.
        * config/m88k-opcode.h: Delete.
        * config/obj-bout.c: Delete.
        * config/obj-bout.h: Delete.
        * config/obj-hp300.c: Delete.
        * config/obj-hp300.h: Delete.
        * config/tc-a29k.c: Delete.
        * config/tc-a29k.h: Delete.
        * config/tc-h8500.c: Delete.
        * config/tc-h8500.h: Delete.
        * config/tc-m88k.c: Delete.
        * config/tc-m88k.h: Delete.
        * config/tc-tahoe.c: Delete.
        * config/tc-tahoe.h: Delete.
        * config/tc-tic80.c: Delete.
        * config/tc-tic80.h: Delete.
        * config/tc-w65.c: Delete.
        * config/tc-w65.h: Delete.
        * config/te-aux.h: Delete.
        * config/te-delt88.h: Delete.
        * config/te-delta.h: Delete.
        * config/te-dpx2.h: Delete.
        * config/te-hp300.h: Delete.
        * config/te-ic960.h: Delete.
        * config/vms-a-conf.h: Delete.
        * doc/c-a29k.texi: Delete.
        * doc/c-h8500.texi: Delete.
        * doc/c-m88k.texi: Delete.
        * README: Remove obsolete examples, and list of supported targets.
        * Makefile.am: Remove a29k, h8500, m88k, tahoe, tic80, w65,
        bout and hp300 support.
        (DEP_FLAGS): Don't define BFD_ASSEMBLER.
        * configure.in: Remove --enable-bfd-assembler, need_bfd,
        primary_bfd_gas.
        * configure.tgt: Remove a29k, h8300-coff, h8500-*, i960 non-elf,
        m68k non bfd, m88k, or32-coff, tic80-*, vax non-bfd, w65k-*, *-nindy.
        * as.c: Remove all non-BFD_ASSEMBLER code, support for above targets.
        * as.h: Likewise.
        * dw2gencfi.c: Likewise.
        * dwarf2dbg.c: Likewise.
        * ehopt.c: Likewise.
        * input-file.c: Likewise.
        * listing.c: Likewise.
        * literal.c: Likewise.
        * messages.c: Likewise.
        * obj.h: Likewise.
        * output-file.c: Likewise.
        * read.c: Likewise.
        * stabs.c: Likewise.
        * struc-symbol.h: Likewise.
        * subsegs.c: Likewise.
        * subsegs.h: Likewise.
        * symbols.c: Likewise.
        * symbols.h: Likewise.
        * tc.h: Likewise.
        * write.c: Likewise.
        * write.h: Likewise.
        * config/aout_gnu.h: Likewise.
        * config/obj-aout.c: Likewise.
        * config/obj-aout.h: Likewise.
        * config/obj-coff.c: Likewise.
        * config/obj-coff.h: Likewise.
        * config/obj-evax.h: Likewise.
        * config/obj-ieee.h: Likewise.
        * config/tc-arm.c: Likewise.
        * config/tc-arm.h: Likewise.
        * config/tc-avr.c: Likewise.
        * config/tc-avr.h: Likewise.
        * config/tc-crx.h: Likewise.
        * config/tc-d10v.h: Likewise.
        * config/tc-d30v.h: Likewise.
        * config/tc-dlx.h: Likewise.
        * config/tc-fr30.h: Likewise.
        * config/tc-frv.h: Likewise.
        * config/tc-h8300.c: Likewise.
        * config/tc-h8300.h: Likewise.
        * config/tc-hppa.h: Likewise.
        * config/tc-i370.h: Likewise.
        * config/tc-i386.c: Likewise.
        * config/tc-i386.h: Likewise.
        * config/tc-i860.h: Likewise.
        * config/tc-i960.c: Likewise.
        * config/tc-i960.h: Likewise.
        * config/tc-ip2k.h: Likewise.
        * config/tc-iq2000.h: Likewise.
        * config/tc-m32c.h: Likewise.
        * config/tc-m32r.h: Likewise.
        * config/tc-m68hc11.h: Likewise.
        * config/tc-m68k.c: Likewise.
        * config/tc-m68k.h: Likewise.
        * config/tc-maxq.c: Likewise.
        * config/tc-maxq.h: Likewise.
        * config/tc-mcore.c: Likewise.
        * config/tc-mcore.h: Likewise.
        * config/tc-mn10200.h: Likewise.
        * config/tc-mn10300.c: Likewise.
        * config/tc-mn10300.h: Likewise.
        * config/tc-ms1.h: Likewise.
        * config/tc-msp430.c: Likewise.
        * config/tc-msp430.h: Likewise.
        * config/tc-ns32k.c: Likewise.
        * config/tc-ns32k.h: Likewise.
        * config/tc-openrisc.h: Likewise.
        * config/tc-or32.c: Likewise.
        * config/tc-or32.h: Likewise.
        * config/tc-ppc.c: Likewise.
        * config/tc-ppc.h: Likewise.
        * config/tc-s390.h: Likewise.
        * config/tc-sh.c: Likewise.
        * config/tc-sh.h: Likewise.
        * config/tc-sparc.c: Likewise.
        * config/tc-tic30.c: Likewise.
        * config/tc-tic30.h: Likewise.
        * config/tc-tic4x.c: Likewise.
        * config/tc-tic4x.h: Likewise.
        * config/tc-tic54x.c: Likewise.
        * config/tc-tic54x.h: Likewise.
        * config/tc-v850.h: Likewise.
        * config/tc-vax.c: Likewise.
        * config/tc-vax.h: Likewise.
        * config/tc-xstormy16.h: Likewise.
        * config/tc-xtensa.h: Likewise.
        * config/tc-z8k.c: Likewise.
        * config/tc-z8k.h: Likewise.
        * config/vms-a-conf.h
        * doc/Makefile.am: Likewise.
        * doc/all.texi: Likewise.
        * doc/as.texinfo: Likewise.
        * doc/internals.texi: Likewise.
        * doc/Makefile.in: Regenerate.
        * Makefile.in: Regenerate.
        * configure: Regenerate.
        * config.in: Regenerate.
        * po/POTFILES.in: Regenerate.

2005-08-09  Nick Clifton  <nickc@redhat.com>

        PR 1070
        * macro.c (getstring): Do not treat round parentheses exactly the
        same as angle brackets - the parentheses need to be preserved and
        passed on to the macro processing code.

2005-08-08  Nick Clifton  <nickc@redhat.com>

        * config/tc-msp430.c (MSP430_ISA_21): Define.
        (mcu_types): Add entries for msp430x21xx variants.

2005-08-08  Nick Clifton  <nickc@redhat.com>

        PR 1070
        * macro.c (getstring): Treat round parentheses in the same way as
        angle brackets.
        (get_any_string): Likewise.

2005-08-07  H.J. Lu  <hongjiu.lu@intel.com>

        PR gas/1118
        * as.c (parse_args): Handle -al=<FILE>.

2005-08-07  Nick Clifton  <nickc@redhat.com>

        * read.c (s_app_line): Accept a line number of 0 for compatibility
        with gcc's output for assembler-with-cpp files.

2005-08-05  Paul Brook  <paul@codesourcery.com>

        * config/tc-arm.c (current_it_mask, current_cc): New variables.
        (do_t_add_sub): Use correct encodings inside IT block.
        (do_t_arit3c): Ditto.
        (do_t_it): Simplify logic.  Set current_it_mask and current_cc.
        (md_assemble): Verify conditional suffixes agains IT blocks.

2005-08-05  Paul Brook  <paul@codesourcery.com>

        * config/tc-arm.c (encode_thumb32_immediate): Only accept shifted
        constants.
        (encode_thumb32_shifted_operand): Prohibit register shifts.
        (encode_thumb32_addr_mode): Fix typo.
        (insns): Correct thumb2 ldm and stm opcodes.

2005-08-02  Khem Raj  <kraj@mvista.com>

        * config/tc-arm.c (do_iwmmxt_wldstd): Correct the offset range for
        WLDRD/WSTRD instruction.

2005-08-02  Alan Modra  <amodra@bigpond.net.au>

        * config/tc-ppc.c (md_apply_fix <ELF>): Don't warn on overflow
        if emitting a reloc.

2005-07-29  Thiemo Seufer  <ths@networkno.de>

        * config/tc-mips.c (s_mips_globl): Allow multiple symbols per .globl.

2005-07-29  Paul Brook  <paul@codesourcery.com>

        * config/tc-arm.c (T16_32_TAB): Add "addr". Fix encoding of push and
        pop.
        (do_t_addr): Implement 32-bit variant.
        (do_t_push_pop): Make some errors warnings.  Handle single register
        32-bit case.
        (insns): Use tCE for adr.
        (md_pcrel_from_section): Handle BFD_RELOC_ARM_T32_ADD_PC12.
        (md_apply_fix): Ditto.

2005-07-29  Paul Brook  <paul@codesourcery.com>

        * config/tc-arm.c (parse_tb): New function.
        (enum operand_parse_code): Add OP_TB.
        (parse_operands): Handle OP_TB.
        (do_t_add_sub_w, do_t_tb): New functions.
        (insns): Add entries for addw, subw, tbb and tbh.
        (md_apply_fix): Handle BFD_RELOC_ARM_T32_IMM12.

2005-07-29  Kazuhiro Inaoka <inaoka.kazuhiro@renesas.com>

        * config/tc-m32r.c (m32r_check_fixup): Fixed X_op check.

2007-07-27  H.J. Lu <hongjiu.lu@intel.com>

        * config/tc-i386.c (handle_large_common): Declare only for ELF.

2005-07-27  Jan Beulich  <jbeulich@novell.com>

        * config/tc-ia64.h (unw_r_record): Change type of fr_mem to unsigned
        int.
        (unw_p_record): Remove unused/redundant fields imask and rmask.
        Combine spoff and pspoff into a union. Combine gr and br into a
        union. Change type of grmask and brmask to unsigned char. Change type
        of frmask to unsigned int.
        (unw_x_record): Combine spoff, pspoff, and treg into a union.
        * config/tc-ia64.c (unwind): New field 'pending_saves'.
        (check_pending_save): New.
        (alloc_record): Clear out entire record.
        (output_psp_gr): Use renamed structure fields.
        (output_psp_sprel): Likewise.
        (output_rp_gr): Likewise.
        (output_rp_br): Likewise.
        (output_rp_psprel): Likewise.
        (output_rp_sprel): Likewise.
        (output_pfs_gr): Likewise.
        (output_pfs_psprel): Likewise.
        (output_pfs_sprel): Likewise.
        (output_preds_gr): Likewise.
        (output_preds_psprel): Likewise.
        (output_preds_sprel): Likewise.
        (output_spill_base): Likewise.
        (output_unat_gr): Likewise.
        (output_unat_psprel): Likewise.
        (output_unat_sprel): Likewise.
        (output_lc_gr): Likewise.
        (output_lc_psprel): Likewise.
        (output_lc_sprel): Likewise.
        (output_fpsr_gr): Likewise.
        (output_fpsr_psprel): Likewise.
        (output_fpsr_sprel): Likewise.
        (output_priunat_gr): Likewise.
        (output_priunat_psprel): Likewise.
        (output_priunat_sprel): Likewise.
        (output_bsp_gr): Likewise.
        (output_bsp_psprel): Likewise.
        (output_bsp_sprel): Likewise.
        (output_bspstore_gr): Likewise.
        (output_bspstore_psprel): Likewise.
        (output_bspstore_sprel): Likewise.
        (output_rnat_gr): Likewise.
        (output_rnat_psprel): Likewise.
        (output_rnat_sprel): Likewise.
        (output_spill_psprel): Likewise.
        (output_spill_sprel): Likewise.
        (output_spill_reg): Likewise.
        (output_fr_mem): Likewise. Allocate one unwind record per set mask
        bit.
        (output_frgr_mem): Likewise.
        (output_gr_mem): Likewise.
        (output_br_mem): Likewise.
        (output_gr_gr): Likewise.
        (output_br_gr): Likewise.
        (fixup_unw_records): Likewise.
        (process_one_record): Use renamed structure fields. For gr_gr and
        br_gr, collect mask from chain of records before output.
        (in_prologue): Simplify and eliminate early returns. Call
        check_pending_save.
        (in_body): Simplify and eliminate early returns.
        (dot_body): Call check_pending_save.
        (md_assemble): Update comment. Deal with pending saves.

2005-07-26  Jan Beulich  <jbeulich@novell.com>

        * config/tc-i386.c (optimize_imm): Calculate candidate immediates
        mask from guessed suffix, but mask out other immediate types only
        if at least on candidate is valid for the insn.

2005-07-25  DJ Delorie  <dj@redhat.com>

        * config/tc-m32c.c (md_cgen_lookup_reloc): Add 8 bit operands.
        Support %mod() modifiers from opcodes.
        * doc/c-m32c.texi (M32C-Modifiers): New section.

2005-07-25  Jan Hubicka  <jh@suse.cz>
            H.J. Lu  <hongjiu.lu@intel.com>

        * config/obj-elf.c: Include "elf/x86-64.h" if TC_I386 is
        defined.
        (elf_com_section_ptr): New.
        (elf_begin): Set elf_com_section_ptr to bfd_com_section_ptr.
        (elf_common_parse): Make it global. Use elf_com_section_ptr
        instead of bfd_com_section_ptr.
        (obj_elf_change_section): Handle x86-64 large bss sections.

        * config/obj-elf.h (elf_com_section_ptr): New.
        (elf_common_parse): New.

        * config/tc-i386.c (handle_large_common): New.
        (md_pseudo_table): Add "largecomm".
        (x86_64_section_letter): New.
        (x86_64_section_word): New.

        * config/tc-i386.h (x86_64_section_word): New.
        (x86_64_section_letter): New.
        (md_elf_section_letter): New. Defined.
        (md_elf_section_word): Likewise.

2005-07-21  Ralf Corsepius  <ralf.corsepius@rtems.org>

        * configure.tgt: Remove i386-*-rtemself*.
        Remove sparc-*-rtemself*.

2005-07-21  Ben Elliston  <bje@gnu.org>

        * config/tc-m68k.h: Remove TE_LYNX conditional code.

2005-07-21  Paul Brook  <paul@codesourcery.com>

        * config/tc-arm.c (encode_thumb32_addr_mode): Don't set
        inst.reloc.pc_rel.

2005-07-20  Tavis Ormandy <taviso@gentoo.org>

        * messages.c: Use vsnprintf instead of vsprintf.

2005-07-20  Kazuhiro Inaoka  <inaoka.kazuhiro@renesas.com>

        * config/tc-m32r.c (tc_gen_reloc): Check BFD_RELOC_32_PCREL and
        BFD_RELOC_16_PCREL to Support R_M32R_REL32.

2005-07-18  Nick Clifton  <nickc@redhat.com>

        * configure.tgt: Restore alpha ordering to list of arches.

2005-07-18  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>

        * tc-hppa.c (pa_ip): Reject match for '#' immediate if not pa20.

2005-07-18  Jan Beulich  <jbeulich@novell.com>

        * config/tc-i386.c (md_begin): Use IS_ELF.
        (tc_i386_fix_adjustable): Likewise.
        (md_estimate_size_before_relax): Likewise.
        (md_apply_fix): Likewise.
        (i386_target_format): Likewise.
        (lex_got): Define to NULL when not ELF or when LEX_AT. Check IS_ELF.
        (i386_immediate): Remove #ifdef LEX_AT.
        (i386_displacement): Likewise.
        * config/tc-i386.h (x86_cons): Prototype only when ELF and when not
        LEX_AT.

2005-07-18  Jan Beulich  <jbeulich@novell.com>

        * config/tc-i386.c (reloc): Convert to ISO C90. Change first
        parameter to unsigned. Parameter sign now is tristate - zero/
        positive mean unsigned/signed, negative means signedness doesn't
        matter. Check field size,
        signedness, and pcrel-ness are in agreement between relocated field
        and relocation type. Adjust diagnostics.
        (optimize_imm): And type mask of operand instead of overwriting it.
        (lex_got): Convert to ISO C90. Add third parameter. Add new field to
        local structure and initialize gotrel accordingly. Pass caller as
        mask of types that the operator can match.
        (x86_cons_fix_new): Let reloc know that signedness of relocation
        doesn't matter.
        (x86_pe_cons_fix_new): Likewise.
        (x86_cons): Pass additional argument to lex_got.
        (i386_immediate): New local variable 'types'. Pass its address as
        additional argument to lex_got. Mask out operand types not supported
        befoe returning.
        (i386_displacement): Likewise. Set bigdisp to all types supported in
        64-bit mode, combining the previously split initialization.

2005-07-18  Jan Beulich  <jbeulich@novell.com>

        * config/tc-i386.c (parse_insn): Reject prefix if unavailable in
        current mode.

2005-07-16  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>

        * config/tc-hppa.c (pa_ip): Search entire mnemonic before considering
        promoted match.

2005-07-16  Alan Modra  <amodra@bigpond.net.au>

        * Makefile.am: Run "make dep-am".
        * Makefile.in: Regenerate.

2007-07-15  H.J. Lu <hongjiu.lu@intel.com>

        * gas/config/tc-i386.h (CpuVMX): New.
        (CpuUnknownFlags): Add CpuVMX.

2005-07-14  Jim Blandy  <jimb@redhat.com>

        Add support for the Renesas M32C.
        * Makefile.am (CPU_TYPES): List m32c.
        (TARGET_CPU_CFILES): List config/tc-m32c.c.
        (TARGET_CPU_HFILES): List config/tc-m32c.h.
        * configure.in: Add case for m32c.
        * configure.tgt: Add cases for m32c and m32c-*-elf.
        * configure: Regenerated.
        * config/tc-m32c.c, config/tc-m32c.h: New files.
        * doc/Makefile.am (CPU_DOCS): Add c-m32c.texi.
        * doc/Makefile.in: Regenerated.
        * doc/all.texi: Set M32C.
        * doc/as.texinfo: Add text for the M32C-specific options and line
        comment characters, and refer to c-m32c.texi.
        * doc/c-m32c.texi: New file.

2005-07-14  Nick Clifton  <nickc@redhat.com>

        PR 1069
        * config/tc-crx.c (reset_vars): Use strncpy to prevent overflowing
        the ins_parse buffer.

2005-07-10  Ralf Corsepius <ralf.corsepius@rtems.org>

        * configure.tgt: Remove a29k-*-rtems*, hppa*-*-rtems*,i386-go32-rtems*,
        i386-*-rtemscoff*, sparc-*-rtemsaout*.

2005-07-10  H.J. Lu  <hongjiu.lu@intel.com>

        * config/tc-i386.c (optimize_disp): Optimize signed 32bit
        displacements.

2005-07-08  Ben Elliston  <bje@au.ibm.com>

        * frags.h: Remove ANSI_PROTOTYPES conditional code.
        * config/obj-elf.h: Likewise.
        * config/tc-h8300.h: Likewise.
        * config/tc-h8500.h: Likewise.
        * config/tc-i370.h: Likewise.
        * config/tc-i386.h: Likewise.
        * config/tc-m68hc11.h: Likewise.
        * config/tc-m68k.h: Likewise.
        * config/tc-ppc.h: Likewise.
        * config/tc-s390.h: Likewise.
        * config/tc-sh.h: Likewise.
        * config/tc-sparc.h: Likewise.
        * config/tc-tic30.c: Likewise.
        * config/tc-w65.h: Likewise.
        * config/tc-xtensa.h: Likewise.

2005-07-08  Hans-Peter Nilsson  <hp@axis.com>

        PR gas/1049
        * config/tc-cris.h (MD_APPLY_SYM_VALUE): Define.

2005-07-07  Kaveh R. Ghazi  <ghazi@caip.rutgers.edu>

        * config/tc-tic30.c (debug): Add format attribute.  Fix format
        bugs.

2005-07-06  H.J. Lu  <hongjiu.lu@intel.com>

        * config/tc-i386.c (cpu_arch): Add sse3.

        * config/tc-i386.h (CpuSSE3): Renamed from ...
        (CpuPNI): This. Defined as CpuSSE3.

        * doc/c-i386.texi: Document .sse3.

2005-07-06  Jan Beulich  <jbeulich@novell.com>

        * config/tc-ia64.c (nop): Use zero for L-unit pseudo-nop.

2005-07-05  Nick Clifton  <nickc@redhat.com>

        * config/tc-pdp11.c (md_apply_fix): Cast first argument to
        md_chars_to_numbers to an unsigned pointer in order to avoid a
        compile time warning.

2005-07-05  Paul Brook  <paul@codesourcery.com>

        * config/tc-ppc.c (ppc_target_format): Add VxWorks.

2005-07-05  Aldy Hernandez  <aldyh@redhat.com>

        * config/tc-ms1.c: New.
        * config/tc-ms1.h: New.
        * testsuite/gas/ms1/allinsn.d: New.
        * testsuite/gas/ms1/allinsn.s: New.
        * testsuite/gas/ms1/badinsn.s: New.
        * testsuite/gas/ms1/badinsn1.s: New.
        * testsuite/gas/ms1/badoffsethigh.s: New.
        * testsuite/gas/ms1/badoffsetlow.s: New.
        * testsuite/gas/ms1/badorder.s: New.
        * testsuite/gas/ms1/badreg.s: New.
        * testsuite/gas/ms1/badsignedimmhigh.s: New.
        * testsuite/gas/ms1/badsignedimmlow.s: New.
        * testsuite/gas/ms1/badsyntax.s: New.
        * testsuite/gas/ms1/badsyntax1.s: New.
        * testsuite/gas/ms1/badunsignedimmhigh.s: New.
        * testsuite/gas/ms1/badunsignedimmlow.s: New.
        * testsuite/gas/ms1/errors.exp: New.
        * testsuite/gas/ms1/ldst.s: New.
        * testsuite/gas/ms1/misc.d: New.
        * testsuite/gas/ms1/misc.s: New.
        * testsuite/gas/ms1/ms1-16-003.d: New.
        * testsuite/gas/ms1/ms1-16-003.s: New.
        * testsuite/gas/ms1/ms1.exp: New.
        * testsuite/gas/ms1/msys.d: New.
        * testsuite/gas/ms1/msys.s: New.
        * testsuite/gas/ms1/relocs.d: New.
        * testsuite/gas/ms1/relocs.exp: New.
        * testsuite/gas/ms1/relocs1.s: New.
        * testsuite/gas/ms1/relocs2.s: New.

2005-07-05  Jan Beulich  <jbeulich@novell.com>

        * config/tc-i386.h (CpuSVME): New.
        (CpuUnknownFlags): Include CpuSVME.
        * config/tc-i386.c (cpu_arch): Add .pacifica and .svme. Add opteron
        as alias of sledgehammer.
        (md_assemble): Include invlpga in the check for insns with two source
        operands.
        (process_operands): Include SVME insns in the check for ignored
        segment overrides. Adjust diagnostic.
        (i386_index_check): Special-case SVME insns with memory operands.

2005-07-04  Khem Raj  <kraj@mvista.com>
            Nick Clifton  <nickc@redhat.com>

        * tc-arm.c (struct arm_it): Make operands.imm signed to match its
        use an immediate value.
        (parse_vfp_reg_list): Make the 2nd parameter an unsigned pointer
        since the register field of the operands structure is unsigned.
        (s_arm_unwind_save_vfp): Make "reg" unsigned.
        (parse_operands): Make the 2ns parameter an unsigned pointer to
        match its use.
        (do_ldrd): When using the imm field of the operands structure as a
        second register field, treat it as unsigned.

2005-07-04  Alan Modra  <amodra@bigpond.net.au>

        PR 1004
        * config/obj-elf.c (obj_elf_change_section): Use backend
        get_sec_type_attr.

2005-07-01  Jan Beulich  <jbeulich@novell.com>

        * config/tc-ia64.c (line_separator_chars): Add '{' and '}'.
        (output_spill_psprel, output_spill_psprel_p): Combine.
        (output_spill_sprel, output_spill_sprel_p): Combine.
        (output_spill_reg, output_spill_regp_p): Combine.
        (process_one_record): Handle psp_psprel.
        (parse_predicate_and_operand): New.
        (convert_expr_to_ab_reg): Two new parameters. Return void. Always
        initialize output values. Emit diagnostic case here.
        (convert_expr_to_xy_reg): Likewise. Don't allow r0, f0, and f1.
        (add_unwind_entry): New second parameter. Allow first parameter to
        be NULL. Parse optional tag, emit warning about further support for
        it otherwise being missing. Check end-of-line when requested.
        (dot_fframe): Clear operand when wrong. Allow tag.
        (dot_vframe): Likewise.
        (dot_vframesp): Likewise. Rename parameter, issue warning when psp
        relative.
        (dot_vframepsp): Remove.
        (dot_altrp): Clear operand when wrong. Allow tag.
        (dot_save): Likewise. Let default case also go through
        add_unwind_entry.
        (dot_savemem): Likewise.
        (dot_restore): Don't return when wrong operand. Allow tag.
        (dot_spillreg, dot_spillreg_p): Combine. Simplify by using
        parse_predicate_and_operand and the new arguments to
        convert_expr_to_ab_reg and convert_expr_to_xy_reg. Don't return
        when wrong operand. Allow tag.
        (dot_restorereg, dot_restorereg_p): Likewise.
        (dot_spillmem, dot_spillmem_p): Likewise.
        (dot_saveg): Clear operand when wrong. Perform tighter operand
        checks. Allow tag.
        (dot_savef): Likewise.
        (dot_saveb): Likewise.
        (dot_savegf): Likewise.
        (dot_spill): Remove end-of-line check.  Combine. Simplify by using
        parse_predicate_and_operand and the new arguments to
        convert_expr_to_ab_reg and convert_expr_to_xy_reg. Don't return
        when wrong operand. Allow tag.
        (popcount): New.
        (dot_label_state): Don't return when wrong operand.
        (dot_copy_state): Likewise.
        (dot_unwabi): Likewise. Check if in prologue.
        (dot_body): Don't call demand_empty_rest_of_line.
        (dot_prologue): Type of mask and grsave is unsigned. Perform tighter
        operand checks.
        (md_pseudo_table): Also use dot_restorereg for .restorereg.p. Also
        use dot_spillreg for .spillreg.p. Also use dot_spillmem for
        .spillpsp.p and .spillsp.p. Also use dot_vframesp for .vframepsp.
        (parse_operand): New second parameter. Don't deal with '}' here
        anymore. Don't advance past end-of-line.
        (parse_operands): Pass second argument to parse_operand.
        (ia64_start_line): Prevent out-of-bounds access through
        input_line_pointer. Deal with '}' here.
        (ia64_unrecognized_line): Don't deal with '}' here.
        (dot_alias): Use ignore_rest_of_line not its deprecated alias
        discard_rest_of_line.

2005-06-30  Zack Weinberg  <zack@codesourcery.com>

        * config/tc-arm.c (T_OPCODE_BRANCH, encode_arm_addr_mode_2)
        (encode_arm_addr_mode_3, encode_arm_cp_address, do_blx, do_t_blx)
        (do_t_branch, insns [b, bl]): Don't encode pipeline offset.
        (do_branch): Always set inst.reloc.pc_rel.
        (s_arm_elf_cons): Disallow use of (plt) suffix.
        (do_adrl): Adjust X_add_number unconditionally.
        (md_pcrel_from): Rename md_pcrel_from_section, add second segT
        argument.  Handle all adjustment for pipeline offset here.
        (md_apply_fix): No need to undo work of md_pcrel_from.  No
        need to extract pre-encoded pipeline adjustments from various
        branch instructions.  Generally, assume instructions are already
        all-bits-zero in the field being fixed up.  Remove all OBJ_ELF
        special cases.  Handle BFD_RELOC_ARM_PLT32 like
        BFD_RELOC_ARM_PCREL_BRANCH.
        (tc_gen_reloc): Remove OBJ_ELF special case.
        * config/tc-arm.c: Define MD_PCREL_FROM_SECTION.

2005-06-30  Ben Elliston  <bje@gnu.org>

        * Makefile.am (check-DEJAGNU): Don't search for expect.
        * Makefile.in: Regenerate.

2005-06-30  Ben Elliston  <bje@gnu.org>

        * Makefile.am (EXPECT): Set to expect.
        (RUNTEST): Likewise, set to runtest.
        * Makefile.in: Regenerate.

2005-06-23  Ben Elliston  <bje@gnu.org>

        * config/m68k-parse.h: Use ISO C90.
        * config/m68k-parse.y: Likewise.
        * config/tc-m68k.h: Likewise.

2005-06-20  H.J. Lu  <hongjiu.lu@intel.com>

        PR 1013
        * config/tc-i386.c (md_assemble): Don't call optimize_disp on
        movabs.
        (optimize_disp): Optimize only if possible. Don't use 64bit
        displacement on non-constants and do same on constants if
        possible.

2005-06-17  Jan Beulich  <jbeulich@novell.com>

        * config/tc-i386.c (reloc): Also handle BFD_RELOC_64_PCREL.
        (tc_i386_fix_adjustable): Include BFD_RELOC_X86_64_GOTOFF64,
        BFD_RELOC_X86_64_DTPOFF64, and BFD_RELOC_X86_64_TPOFF64.
        (output_disp): Do GOTPC conversion also for BFD_RELOC_X86_64_32S
        and BFD_RELOC_32_PCREL. Use BFD_RELOC_X86_64_GOTPC32 instead of
        aborting.
        (output_imm): Do GOTPC conversion also for BFD_RELOC_X86_64_32S.
        Use BFD_RELOC_X86_64_GOTPC32 instead of aborting.
        (tc_gen_reloc): Do GOTPC conversion also for BFD_RELOC_32_PCREL.
        Use BFD_RELOC_X86_64_GOTPC32 instead of aborting. Also handle
        BFD_RELOC_X86_64_GOTOFF64, BFD_RELOC_X86_64_GOTPC32,
        BFD_RELOC_X86_64_DTPOFF64, and BFD_RELOC_X86_64_TPOFF64. Also
        convert 8-byte pc-relative relocations.
        (lex_got): Use BFD_RELOC_X86_64_GOTOFF64 for 64-bit @gotoff.
        (i386_validate_fix): Likewise.
        (x86_cons): Also handle quad values in 64-bit mode.
        (i386_displacement): Also handle BFD_RELOC_X86_64_GOTOFF64.
        (md_apply_fix): Include BFD_RELOC_X86_64_DTPOFF64 and
        BFD_RELOC_X86_64_TPOFF64 in the TLS check. Also convert BFD_RELOC_64
        to pc-relative variant. Also check for BFD_RELOC_64_PCREL.

2005-06-13  Zack Weinberg  <zack@codesourcery.com>

        * config/tc-arm.c (find_real_start): Check S_IS_LOCAL on
        symbolP as well as for names with a leading dot.  Use ACONCAT.
        (md_apply_fix): For branch relocations, only replace value
        with fixP->fx_offset (under #ifdef OBJ_ELF) when !fixP->fx_done.
        (arm_force_relocation): Remove #ifdef OBJ_ELF case.
        * config/tc-arm.h (LOCAL_LABEL): Remove unnecessary parentheses.
        (LOCAL_LABEL_PREFIX): Don't define.

2005-06-10  Alan Modra  <amodra@bigpond.net.au>

        * config/tc-hppa.c (pa_block): Allocate just one byte for the
        fill pattern.

2005-06-08  James E Wilson  <wilson@specifixinc.com>

        PR 994
        * config/tc-ia64.c (slot_index): Revert last change.  If first_frag
        is NULL, then emit a warning, and return the current index.

2005-06-08  Tomas Hurka  <tom@hukatronic.cz>

        PR 991
        * config/tc-m68k.c (m68k_ip): Test for insn compatiblity using a
        temporary copy of the operands array so that changes can be safely
        backed out if the insn does not match.
        (m68k_compare_opcode): Shortcut the test when the parameters are
        the same.  Return 1 if the names match but the second opcode is
        further on in the array than the first.

2005-06-08  Nick Clifton  <nickc@redhat.com>

        PR 994
        * config/tc-ia64.c (slot_index): Check for a NULL first_frag.

2005-06-08  Kazuhiro Inaoka <inaoka.kazuhiro@renesas.com>

        * config/tc-m32r.c (use_parallel): Change default value from 1 to 0.

2005-06-07  Aldy Hernandez  <aldyh@redhat.com>
            Michael Snyder  <msnyder@redhat.com>
            Stan Cox  <scox@redhat.com>

        * configure.in: Add ms1 case.

        * configure: Regenerate.

        * configure.tgt: Add ms1 case.

2005-06-07  Bob Wilson  <bob.wilson@acm.org>

        * config/tc-xtensa.h (resource_table): Change units to unsigned chars.
        * config/tc-xtensa.c (new_resource_table): Likewise.
        (resize_resource_table): Likewise.
        (release_resources): Fix assertion for unsigned values.

2005-06-07  Zack Weinberg  <zack@codesourcery.com>

        * cgen.c, cgen.h, tc.h, write.c, config/obj-coff.c
        * config/tc-a29k.c, config/tc-alpha.c, config/tc-alpha.h
        * config/tc-arc.c, config/tc-arc.h, config/tc-arm.c
        * config/tc-arm.h, config/tc-avr.c, config/tc-avr.h
        * config/tc-cris.c, config/tc-crx.c, config/tc-d10v.c
        * config/tc-d10v.h, config/tc-d30v.c, config/tc-d30v.h
        * config/tc-dlx.c, config/tc-dlx.h, config/tc-fr30.h
        * config/tc-frv.c, config/tc-frv.h, config/tc-h8300.c
        * config/tc-h8500.c, config/tc-hppa.c, config/tc-hppa.h
        * config/tc-i370.c, config/tc-i370.h, config/tc-i386.c
        * config/tc-i386.h, config/tc-i860.c, config/tc-i860.h
        * config/tc-i960.c, config/tc-i960.h, config/tc-ia64.c
        * config/tc-ip2k.c, config/tc-ip2k.h, config/tc-iq2000.c
        * config/tc-iq2000.h, config/tc-m32r.c, config/tc-m32r.h
        * config/tc-m68hc11.c, config/tc-m68hc11.h, config/tc-m68k.c
        * config/tc-m68k.h, config/tc-m88k.c, config/tc-maxq.c
        * config/tc-mcore.c, config/tc-mcore.h, config/tc-mips.c
        * config/tc-mips.h, config/tc-mmix.c, config/tc-mn10200.c
        * config/tc-mn10300.c, config/tc-msp430.c, config/tc-ns32k.c
        * config/tc-openrisc.h, config/tc-or32.c, config/tc-or32.h
        * config/tc-pdp11.c, config/tc-pj.c, config/tc-pj.h
        * config/tc-ppc.c, config/tc-ppc.h, config/tc-s390.c
        * config/tc-s390.h, config/tc-sh64.c, config/tc-sh.c
        * config/tc-sh.h, config/tc-sparc.c, config/tc-sparc.h
        * config/tc-tahoe.c, config/tc-tic30.c, config/tc-tic4x.c
        * config/tc-tic54x.c, config/tc-tic80.c, config/tc-v850.c
        * config/tc-v850.h, config/tc-vax.c, config/tc-vax.h
        * config/tc-w65.c, config/tc-xstormy16.c, config/tc-xstormy16.h
        * config/tc-xtensa.c, config/tc-z8k.c:
        Replace all instances of the string "_apply_fix3" with
        "_apply_fix".
        * po/POTFILES.in, po/gas.pot: Regenerate.

2005-06-08  Alan Modra  <amodra@bigpond.net.au>

        * Makefile.am: Run "make dep-am".
        (POTFILES): Remove GAS_CFILES.
        * Makefile.in: Regenerate.

2005-06-07  David Ung  <davidu@mips.com>

        * config/tc-mips.c (mips_cpu_info_table): Add cpu names m4k, 24k,
        24kc, 24kf and 24kfx under MIPS32 release 2.

2005-06-04  Nick Clifton  <nickc@redhat.com>

        * config/tc-arm.c (CE, C3, CM, UE, UF): Redefine without reference
        to their Thumb-enabled equivalents.

2005-06-01  Maciej W. Rozycki  <macro@linux-mips.org>

        * config/tc-mips.c (load_register): Add leading "0x" to the
        output of sprintf_vma().
        (macro): Likewise.

2005-06-01  Nick Clifton  <nickc@redhat.com>

        * config/tc-arm.c (TxCE, TxC3, TxCM, TUE, TUF): Remove redundant
        test for the presence of thumb version of the parsing functions
        since they must always exist and the test generates a compile time
        warning message.

2005-05-31  Richard Henderson  <rth@redhat.com>

        * config/tc-alpha.c (O_lituse_jsrdirect): New.
        (alpha_reloc_op): Add it.
        (debug_exp): Handle it.
        (DUMMY_RELOC_LITUSE_JSRDIRECT): New.
        (emit_insn): Handle it.
        * doc/c-alpha.texi (Alpha-Relocs): Document lituse_jsrdirect.

2005-05-31  Christian Groessler  <chris@groessler.org>

        * write.c (dump_section_relocs): Convert to ISO-C.
        (write_relocs): Avoid signed/unsigned and fprintf argument
        warnings in debug code.

2005-05-26  Zack Weinberg  <zack@codesourcery.com>

        * config/tc-arm.h (TC_FIX_TYPE): Change to int.
        (TC_INIT_FIX_DATA): Initialize to 0, not NULL.
        * config/tc-arm.c (fix_new_arm): Remove now-unnecessary cast.
        (md_apply_fix3): Delete fix_is_thumb variable; refer to
        fixP->tc_fix_data directly in the sole place it was used.
        Explicitly truncate value, *valP, fixP->fx_addnumber, and
        fixP->fx_offset to 32 bits, for consistent behavior between 32-
        and 64-bit hosts.

2005-05-27  Jan Beulich  <jbeulich@novell.com>

        * config/tc-ia64.c (struct proc_pending): New.
        (unwind): Replace proc_start with proc_pending.
        (unwind_diagnostic): Check unwind.proc_pending.sym.
        (dot_proc): Replace unwind.proc_start with unwind.proc_pending.sym.
        Check if previous proc not closed. Record all entry points.
        (dot_endp): Replace unwind.proc_start with unwind.proc_pending.sym.
        Set symbol sizes for entry points recorded in dot_proc. Check
        arguments for consistency with respective .proc's.
        (md_assemble): Replace unwind.proc_start with
        unwind.proc_pending.sym.

2005-05-27  Jan Beulich  <jbeulich@novell.com>

        * config/tc-ia64.c (emit_one_bundle): Restrict scope of ptr, end_ptr,
        and last_ptr. Check all in-use slots for first one with non-NULL
        unwind_record. Don't reload end_ptr before second update round.

2005-05-26  James E Wilson  <wilson@specifixinc.com>

        * config/tc-ia64.c (extra_goodness): Update comment.
        (md_begin): Add debugging code to print best_template table.

2005-05-25  Jan Beulich  <jbeulich@novell.com>

        * config/tc-ia64.c (md_begin): Don't try to match slot 2 of an MLX
        template.

2005-05-25  Jan Beulich  <jbeulich@novell.com>

        * config/tc-ia64.c (ia64_gen_real_reloc_type): Also handle
        BFD_RELOC_UNUSED when determining the width of the reloc.

2005-05-25  Jan Beulich  <jbeulich@novell.com>

        * config/tc-ia64.c (dot_endp): Clear out all three pointers in unwind
        section entry.

2005-05-25  Jan Beulich  <jbeulich@novell.com>

        * config/tc-ia64.c (dot_radix): Rewrite.

2005-05-25  Jan Beulich  <jbeulich@novell.com>

        * config/tc-ia64.c (struct unw_rec_list): Remove next_slot_number
        and next_slot_frag.
        (alloc_record): Remove references to next_slot_number and
        next_slot_frag.
        (emit_one_bundle): Likewise.

2005-05-22  Nick Clifton  <nickc@redhat.com>

        * config/tc-v850.c (md_apply_fix3): Pass the address of the
        message buffer when invoking the insert function.

2005-05-21  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>

        * config/tc-hppa.c (pa_ip): Promote architecture from PA 1.0 to 1.1
        only if an instruction match is found.

2005-05-20  Bob Wilson  <bob.wilson@acm.org>

        * config/tc-xtensa.c (xg_assemble_vliw_tokens): Change subtraction
        to addition in argument to xtensa_dwarf2_emit_insn.

2005-05-19  Zack Weinberg  <zack@codesourcery.com>

        * Makefile.am: Have 'all' depend on 'info'.
        * Makefile.in: Regenerate.

2005-05-19  Alan Modra  <amodra@bigpond.net.au>

        * config/tc-ppc.c (ppc_force_relocation): Add BFD_RELOC_24_PLT_PCREL.

2005-05-19  Anton Blanchard  <anton@samba.org>

        * config/tc-ppc.c (parse_cpu): Handle "-mpower5".
        (md_show_usage): Document it.
        (ppc_setup_opcodes): Insert POWER5 mnemonics.
        * doc/c-ppc.texi (PowerPC-Opts): Document "-mpower5".

2005-05-19  Jan Beulich  <jbeulich@novell.com>

        * config/tc-ia64.c (dot_endp): Don't use global symbol for unwind
        relocations in unwind section.

2005-05-18  Nick Clifton  <nickc@redhat.com>

        * config/tc-v850.c (md_apply_fix3): Only use the insertion routine
        if one exists.  Ignore any error messages it may produce, just
        allow it to perform the insertion.

2005-05-17  Zack Weinberg  <zack@codesourcery.com>

        * hash.c (hash_lookup): Add len parameter.  All callers changed.
        (hash_find_n): New interface.
        * hash.h: Prototype hash_find_n.
        * sb.c: Include as.h.
        (scrub_from_sb, sb_to_scrub, scrub_position): New statics.
        (sb_scrub_and_add_sb): New interface.
        * sb.h: Prototype sb_scrub_and_add_sb.
        * input-scrub.c (input_scrub_include_sb): Use sb_scrub_and_add_sb.

        * config/tc-arm.h (TC_FORCE_RELOCATION_LOCAL): Remove
        reference to BFD_RELOC_ARM_GOT12 which is never generated.
        * config/tc-arm.c: Rewrite, adding Thumb-2 support.

2005-05-17  Daniel Jacobowitz  <dan@codesourcery.com>

        * doc/Makefile.am (gasver.texi): Don't use $<.
        * doc/Makefile.in: Regenerated.

2005-05-17  Nick Clifton  <nickc@redhat.com>

        PR 876
        * symbols.c (resolve_symbol_value): Do not move symbols whose
        value expression has not been resolved or finalized into the
        absolute section as this will confuse other parts of the assembler
        into thinking that their value is zero.

2005-05-17  Jan Beulich  <jbeulich@novell.com>

        * read.c (_find_end_of_line): New.
        (find_end_of_line): New.
        (HANDLE_CONDITIONAL_ASSEMBLY): Use it.
        (read_a_source_file): Use it.
        (s_globl): Use it.
        (s_macro): Use it.
        (get_line_sb): Use it.
        (s_errwarn): Replace discard_rest_of_line by ignore_rest_of_line.
        (s_comm_internal): Likewise.
        (s_lsym): Likewise.
        (s_macro): Likewise.
        (s_ignore): Use ignore_rest_of_line.
        * read.h (find_end_of_line): Prototype.
        (discard_rest_of_line): Remove prototype. #define to
        ignore_rest_of_line.

2005-05-17  Nick Clifton  <nickc@redhat.com>

        * config/tc-v850,h (TC_FIX_TYPE): Define.
        (TC_INIT_FIX_TYPE): Define.
        * config/tc-v850.c (md_assemble): When creating a fix record the
        operand in the tc_fix_data field.
        (md_apply_fix3): When applying a resolved fix use the operand's
        insertion procedure to store the value, if the operand has been
        recorded.

2005-05-15  Daniel Jacobowitz  <dan@codesourcery.com>

        * Makefile.am (m68k-parse.c, itbl-parse.c): Update ylwrap
        invocation.
        * Makefile.in: Regenerated.

2005-05-13  Sterling Augustine  <sterling@tensilica.com>
            Bob Wilson  <bob.wilson@acm.org>

        * config/tc-xtensa.c (xtensa_insnbuf_set_operand): Clarify error
        message.
        (xtensa_mark_zcl_first_insns): Fix incorrect nesting of conditional
        for handling RELAX_CHECK_ALIGN_NEXT_OPCODE.

2005-05-11  Alan Modra  <amodra@bigpond.net.au>

        * config/tc-ppc.c (md_apply_fix3): Allow pcrel forms of BFD_RELOC_16,
        BFD_RELOC_LO16, BFD_RELOC_HI16 and BFD_RELOC_HI16_S.

2005-05-10  Michael Matz  <matz@suse.de>

        * frags.c (frag_grow): Don't be too greedy in allocating memory.

        * config/tc-hppa.c (pa_block): Check arguments to .block[z].

2005-05-10  Hans-Peter Nilsson  <hp@bitrange.com>

        PR binutils/886
        * config/tc-mmix.c (mmix_handle_mmixal): Rearrange slightly.
        Handle label-without-colon before ordinary dot-pseudo as an
        ordinary label.  Don't leak memory for label-without-colon alone
        on a line.  Don't mmixal-munge operands for dot-pseudos.

2005-05-10  Jan Beulich  <jbeulich@novell.com>

        * macro.c (get_any_string): Remove the two last parameters. Replace
        references to the former expand parameter by using macro_alternate.
        Simplify loop condition for checking for end-of-string.
        (get_string): Remove redunant call to sb_skip_white.
        (do_formals): Remove two last arguments to get_any_string.
        (macro_expand): Likewise.
        (expand_irp): Likewise.

2005-05-10  Jan Beulich  <jbeulich@novell.com>

        * read.c (s_macro): Move local variable 'local' to smaller scope.
        Call sb_kill on it when done.

2005-05-09  Jan Beulich  <jbeulich@novell.com>

        * config/tc-i386.c (optimize_disp): Discard displacement entirely
        when zero and not required by encoding constraints.

2005-05-09  H.J. Lu  <hongjiu.lu@intel.com>

        PR 936
        * config/tc-sh64.c (sh64_fake_label): New.

        * config/tc-sh64.h (TC_FAKE_LABEL): New.

        * doc/internals.texi (TC_FAKE_LABEL): Document.

        * write.c (TC_FAKE_LABEL): New.
        (adjust_reloc_syms): Use it.
        (write_object_file): Likewise.

2005-05-09  Jan Beulich  <jbeulich@novell.com>

        * config/tc-i386.c (parse_insn): Disallow use of prefix separator
        and comma in Intel mode.

2005-05-09  Jan Beulich  <jbeulich@novell.com>

        * config/tc-i386.c (tc_x86_regname_to_dw2regnum): Correct 64-bit mode
        names to match ABI. Add more registers for 32-bit and 64-bit modes.
        Make name array static and const. Adjust lookup to account for NULL
        entries (standing for unused register numbers).

2005-05-09  Jan Beulich  <jbeulich@novell.com>

        * config/tc-i386.c (parse_insn): Consider all matching instructions
        when checking for string instruction after string-only prefix.

2005-05-07  H.J. Lu  <hongjiu.lu@intel.com>

        PR 940
        * config/tc-ia64.c (start_unwind_section): Properly check
        comdat group with SHF_GROUP.

2005-05-06  Bob Wilson  <bob.wilson@acm.org>

        * doc/c-xtensa.texi (Literal Directive): Spelling correction.

2005-05-06  Bob Wilson  <bob.wilson@acm.org>

        * config/tc-xtensa.c: Remove excess whitespace.
        * config/tc-xtensa.h: Likewise.
        * config/xtensa-istack.h: Likewise.
        * config/xtensa-relax.c: Likewise.
        * config/xtensa-relax.h: Likewise.

2005-05-06  Nick Clifton  <nickc@redhat.com>

        * sb.h: Fix formatting of comments.
        * sb.c: Fix formatting of comments.

2005-05-06  Jan Beulich  <jbeulich@novell.com>

        * sb.h (sb_add_buffer): Reintroduce.
        * sb.c (sb_add_buffer): Likewise.

2005-05-06  Jan Beulich  <jbeulich@novell.com>

        * macro.c (new_formal, del_formal): New.
        (do_formals): Use new_formal. Check for and parse qualifier. Warn if
        required argument has default value. Stop looking for more formal
        when there was a vararg one.
        (macro_expand_body): Use new_formal and del_formal.
        (macro_expand): Likewise. Initialize local variable err. Don't
        return immediately when encountering an error. Warn when keyword
        argument already had a value assigned. Eliminate duplicate clearing
        of argument value. When current positional argument matches parameter
        of vararg type, assign to it all the remaining arguments. Issue error
        when required parameter does not have value.
        (free_macro): Use del_formal.
        (expand_irp): Initialize formal type. Free buffers associated with
        formal prior to returning.
        * macro.h (struct formal_struct): Add new field 'type' with new
        enumeration type 'formal_type'.
        * doc/as.texinfo: Document macro parameter qualifiers.
        * NEWS: Mention new functionality.

2005-05-06  Jan Beulich  <jbeulich@novell.com>

        * cond.c (s_ifb): New.
        * read.c (potable): Add s_ifb as handler for .ifb and .ifnb.
        * read.h (s_ifb): Prototype.
        * doc/as.texinfo: Document .ifb and .ifnb.

2005-05-05  Steve Ellcey  <sje@cup.hp.com>

        * config/tc-ia64.c (MIN): Undef.

2005-05-05  Paul Brook  <paul@codesourcery.com>

        * config/tc-i386.h (ELF_TARGET_FORMAT): Define for TE_VXWORKS.

2005-05-05  Matt Thomas <matt@3am-software.com>

        * config/tc-vax.c (md_assemble): Don't assume a valueT is 4
        bytes.

2005-05-05  Nick Clifton  <nickc@redhat.com>

        * Update the address and phone number of the FSF organization in
        the GPL notices in the following files:
        COPYING, app.c, as.c, as.h, asintl.h, atof-generic.c, bignum.h,
        bit_fix.h, cgen.c, cgen.h, cond.c, debug.c, depend.c, dw2gencfi.c,
        dw2gencfi.h, dwarf2dbg.c, dwarf2dbg.h, ecoff.c, ecoff.h, ehopt.c,
        emul-target.h, emul.h, expr.c, expr.h, flonum-copy.c,
        flonum-konst.c, flonum.h, frags.c, frags.h, hash.c, hash.h,
        input-file.c, input-file.h, input-scrub.c, itbl-lex.h, itbl-lex.l,
        itbl-ops.c, itbl-ops.h, itbl-parse.y, listing.c, listing.h,
        literal.c, macro.c, macro.h, messages.c, obj.h, output-file.c,
        output-file.h, read.c, read.h, sb.c, sb.h, stabs.c,
        struc-symbol.h, subsegs.c, subsegs.h, symbols.c, symbols.h, tc.h,
        write.c, write.h, config/aout_gnu.h, config/atof-ieee.c,
        config/atof-vax.c, config/itbl-mips.h, config/m68k-parse.h,
        config/m68k-parse.y, config/m88k-opcode.h, config/obj-aout.c,
        config/obj-aout.h, config/obj-bout.c, config/obj-bout.h,
        config/obj-coff.c, config/obj-coff.h, config/obj-ecoff.c,
        config/obj-ecoff.h, config/obj-elf.c, config/obj-elf.h,
        config/obj-evax.c, config/obj-evax.h, config/obj-hp300.c,
        config/obj-hp300.h, config/obj-ieee.c, config/obj-ieee.h,
        config/obj-multi.h, config/obj-som.c, config/obj-som.h,
        config/tc-a29k.c, config/tc-a29k.h, config/tc-alpha.c,
        config/tc-alpha.h, config/tc-arc.c, config/tc-arc.h,
        config/tc-arm.h, config/tc-avr.c, config/tc-avr.h,
        config/tc-cris.c, config/tc-cris.h, config/tc-crx.c,
        config/tc-crx.h, config/tc-d10v.c, config/tc-d10v.h,
        config/tc-d30v.c, config/tc-d30v.h, config/tc-dlx.c,
        config/tc-dlx.h, config/tc-fr30.c, config/tc-fr30.h,
        config/tc-frv.c, config/tc-frv.h, config/tc-generic.c,
        config/tc-generic.h, config/tc-h8300.c, config/tc-h8300.h,
        config/tc-h8500.c, config/tc-h8500.h, config/tc-hppa.c,
        config/tc-hppa.h, config/tc-i370.c, config/tc-i370.h,
        config/tc-i386.c, config/tc-i386.h, config/tc-i860.c,
        config/tc-i860.h, config/tc-i960.c, config/tc-i960.h,
        config/tc-ia64.c, config/tc-ia64.h, config/tc-ip2k.c,
        config/tc-ip2k.h, config/tc-iq2000.c, config/tc-iq2000.h,
        config/tc-m32r.c, config/tc-m32r.h, config/tc-m68851.h,
        config/tc-m68hc11.c, config/tc-m68hc11.h, config/tc-m68k.c,
        config/tc-m68k.h, config/tc-m88k.c, config/tc-m88k.h,
        config/tc-maxq.c, config/tc-maxq.h, config/tc-mcore.c,
        config/tc-mcore.h, config/tc-mips.c, config/tc-mips.h,
        config/tc-mmix.c, config/tc-mmix.h, config/tc-mn10200.c,
        config/tc-mn10200.h, config/tc-mn10300.c, config/tc-mn10300.h,
        config/tc-msp430.c, config/tc-msp430.h, config/tc-ns32k.c,
        config/tc-ns32k.h, config/tc-openrisc.c, config/tc-openrisc.h,
        config/tc-or32.c, config/tc-or32.h, config/tc-pdp11.c,
        config/tc-pdp11.h, config/tc-pj.c, config/tc-pj.h,
        config/tc-ppc.c, config/tc-ppc.h, config/tc-s390.c,
        config/tc-s390.h, config/tc-sh.c, config/tc-sh.h,
        config/tc-sh64.c, config/tc-sh64.h, config/tc-sparc.c,
        config/tc-sparc.h, config/tc-tahoe.c, config/tc-tahoe.h,
        config/tc-tic30.c, config/tc-tic30.h, config/tc-tic4x.c,
        config/tc-tic4x.h, config/tc-tic54x.c, config/tc-tic54x.h,
        config/tc-tic80.c, config/tc-tic80.h, config/tc-v850.c,
        config/tc-v850.h, config/tc-vax.c, config/tc-vax.h,
        config/tc-w65.c, config/tc-w65.h, config/tc-xstormy16.c,
        config/tc-xstormy16.h, config/tc-xtensa.c, config/tc-xtensa.h,
        config/tc-z8k.c, config/tc-z8k.h, config/te-386bsd.h,
        config/te-freebsd.h, config/te-hp300.h, config/te-hppa.h,
        config/te-ic960.h, config/te-irix.h, config/te-nbsd.h,
        config/te-netware.h, config/te-sparcaout.h, config/te-sun3.h,
        config/te-tmips.h, config/te-vxworks.h, config/vax-inst.h,
        config/xtensa-istack.h, config/xtensa-relax.c,
        config/xtensa-relax.h, doc/fdl.texi

2005-05-05  Nick Clifton  <nickc@redhat.com>

        * config/tc-arm.c (arm_opts): Make -mlittle-endian switch set
        the target_big_endian variable to false.

2005-05-04  Alan Modra  <amodra@bigpond.net.au>

        * config/obj-ecoff.c (ecoff_frob_file_before_fix): Correct section
        list traversal.  Use bfd_section_list_prepend.
        * config/tc-mmix.c (mmix_frob_file): Don't needlessly iterate
        over the section list.
        * config/tc-xtensa.c (xtensa_remove_section): Delete.
        (xtensa_insert_section): Delete.
        (xtensa_move_seg_list_to_beginning): Use bfd_section_list_remove
        and bfd_section_list_prepend.
        (xtensa_reorder_seg_list): Use bfd_section_list_remove and
        bfd_section_list_insert_after.

2005-05-03  Nick Clifton  <nickc@redhat.com>

        * config/obj-ecoff.c (ecoff_frob_file_before_fix): Fix invocations
        of bfd_section_list... macros.
        * config/tc-mmix.c (mmix_frob_file): Likewise.
        * config/tc-xtensa.c (xtensa_remove_section): Likewise.
        (xtensa_insert_section): Likewise.

        * macro.c (macro_hash): Remove static.
        * macro.h (macro_hash): Provide an external declaration.

2005-05-02  H.J. Lu  <hongjiu.lu@intel.com>

        * write.c (write_object_file): Use bfd_section_double_list_remove
        to remove sections.

2005-05-02  Daniel Jacobowitz  <dan@codesourcery.com>

        * doc/Makefile.am (gasver.texi): Correct quoting.
        * doc/Makefile.in: Regenerated.

2005-04-29  Ralf Corsepius <ralf.corsepius@rtems.org>

        * configure.tgt: Add h8300*-*-rtemscoff.
        Switch h8300*-*-rtems* to elf.

2005-04-29  H.J. Lu  <hongjiu.lu@intel.com>

        * hash.c: Undo the last change.
        * hash.h: Likewise.

2005-04-29  Daniel Jacobowitz  <dan@codesourcery.com>

        * doc/Makefile.am (gasver.texi): Depend on bfd/configure instead
        of Makefile.
        (DISTCLEANFILES): Remove.
        (MAINTAINERCLEANFILES): Add asconfig.texi.
        * aclocal.m4, Makefile.in, doc/Makefile.in: Regenerated.

2005-04-29  Ben Elliston  <bje@au.ibm.com>

        * Makefile.am (GAS_CFILES): Remove bignum-copy.c.
        (GENERIC_OBJS): Likewise, remove bignum-copy.o.
        (bignum-copy.o): Remove.
        * Makefile.in: Regenerate.
        * makefile.vms (OBJS): Remove bignum-copy.obj.
        * symbols.h (local_symbol_make): Remove declaration.
        (verify_symbol_chain_2): Likewise.
        * symbols.c (local_symbol_make): Make static.
        (max_indent_level): Likewise.
        (verify_symbol_chain_2): Remove.
        * macro.c (macro_hash): Make static.
        * messages.c (fprint_value): Remove.
        * read.h (get_absolute_expr): Remove.
        (emit_leb128_expr): Likewise.
        (do_s_func): Likewise.
        * read.c (do_s_func): Make static.
        (emit_leb128_expr): Likewise.
        (get_absolute_expr): Likewise.
        * as.h (as_howmuch): Remove declaration.
        (fprint_value): Likewise.
        * as.c (myname): Make static.
        * input-scrub.c (as_howmuch): Remove.
        (as_1_char): Likewise.
        * input-file.h (input_file_is_open): Remove.
        * input-file.c (input_file_is_open): Likewise.
        * expr.h (expr_build_unary): Remove declaration.
        (expr_build_binary): Likewise.
        * expr.c (expr_build_unary): Remove.
        (expr_build_binary): Likewise.
        * hash.h (hash_replace): Remove declaration.
        (hash_delete): Likewise.
        * hash.c (hash_replace): Remove.
        (hash_delete): Likewise.
        * bignum-copy.c (bignum_copy): Move from here ..
        * config/tc-vax.c (bignum_copy): .. to here.
        * bignum.h (LOG_TO_BASE_2_OF_10): Remove.
        (bignum_copy): Remove extern declaration.
        * sb.h (string_count): Remove extern declaration.
        (sb_build, sb_add_buffer, sb_print, sb_print_at): Likewise.
        (sb_name): Likewise.
        * sb.c (dsize): Replace preprocessor macro with static int.
        (string_count): Make static.
        (sb_build, sb_add_buffer, sb_print, sb_print_at): Likewise.
        (sb_name): Likewise.
        * config/obj-coff.c (dim_index): Make static.
        * config/tc-i386.c (GOT_symbol): Likewise.
        (output_invalid_buf): Likewise.
        * doc/internals.texi (Warning and error messages): Remove the
        prototype for fprint_value.

2005-04-27  Ben Elliston  <bje@au.ibm.com>

        * link.cmd: Remove.

2005-04-26  H.J. Lu  <hongjiu.lu@intel.com>

        * config/obj-multi.h (FAKE_LABEL_NAME): Defined.

        * read.c (pseudo_set): Disallow symbol set to common symbol.

        PR 857
        * write.c (write_object_file): Report common symbol name when
        disallowing local symbol set to common symbol.
        (adjust_reloc_syms): Disallow local symbol set to undefined
        symbol.

2005-04-25  Jan Beulich  <jbeulich@novell.com>

        * macro.c (macro_expand_body): Replace locals indicator parameters
        with actual macro_entry. New local variables macro_line and err.
        Don't return when encountering an error, just record the fact.
        Detect local symbol name colliding with parameter. Track line number
        inside of macro expansion.
        (do_formals): Move local variable name to wider scope. Check
        parameter of the same name doesn't already exist. In MRI mode, also
        check it doesn't collide with the argument count pseudo-parameter).
        (define_macro): Add file and line number parameters. Remove local
        variable namestr. New local variable error. Initialize macro_entry
        members file, line, and name. Don't return when encountering an
        error, just record the fact. Use %s in some diagnostics for read.c
        to insert the macro name. Free macro_entry on error.
        (macro_expand): Pass macro_entry to macro_epand_body. Don't return
        when encountering an error, just record the fact.
        (expand_irp): Don't return when encountering an error, just record
        the fact.
        * macro.h (macro_struct): New members name, file, and line.
        (define_macro): Add file and line number parameters.
        * read.c (s_macro): Pass file and line to define_macro. Tag warning
        regarding pseudo-op redefinition with the file/line that macro
        definition started at.

2005-04-22  Bob Wilson  <bob.wilson@acm.org>

        * config/tc-xtensa.c (LOOKAHEAD_ALIGNER): Delete macro.
        (future_alignment_required): Remove ifdefs that use it.

2005-04-22  Bob Wilson  <bob.wilson@acm.org>

        * config/tc-xtensa.c (xg_get_build_instr_size): Remove.
        (xg_is_narrow_insn, xg_expand_narrow): Remove.  Merge into...
        (xg_is_single_relaxable_insn): ...here.  Add "targ" and "narrow_only"
        parameters.
        (xg_assembly_relax, xg_find_narrowest_format, relaxation_requirements,
        convert_frag_narrow): Use new version of xg_is_single_relaxable_insn.

2005-04-21  Christian Groessler  <chris@groessler.org>

        * config/tc-z8k.c (md_assemble): Fix buffer overrun in operand[]
        array.

2005-04-20  H.J. Lu  <hongjiu.lu@intel.com>

        * config/obj-aout.h (S_IS_EXTERN): Removed.
        * config/obj-bout.h (S_IS_EXTERN): Likewise.
        * config/obj-coff.h (S_IS_EXTERN): Likewise.
        * symbols.c (S_IS_EXTERN): Likewise.
        * symbols.h (S_IS_EXTERN): Likewise.

        * config/tc-alpha.c (tc_gen_reloc): Replace S_IS_EXTERN with
        S_IS_EXTERNAL.
        * config/tc-d10v.c (md_apply_fix3): Likewise.
        * config/tc-ia64.c (ia64_fix_adjustable): Likewise.
        * config/tc-iq2000.c (iq2000_fix_adjustable): Likewise.
        * config/tc-m32r.c (m32r_fix_adjustable): Likewise.
        * config/tc-mmix.c (mmix_adjust_symtab): Likewise.
        * config/tc-sh64.c (shmedia_frob_file_before_adjust): Likewise.
        (shmedia_md_convert_frag): Likewise.
        * symbols.c (print_symbol_value_1): Likewise.
        * write.c (write_object_file): Likewise.

2005-04-20  Nick Clifton  <nickc@redhat.com>

        * config/tc-xtensa.c (get_aligned_diff): Change type of
        branch_align to offsetT so that its signedness matches that of
        target_size.

        * config/tc-mips.c (macro): Use sprintf_vma to convert a > 32 bit
        number into a readable string.
        (load_register): Likewise.

2005-04-20  Andreas Schwab  <schwab@suse.de>

        * config/tc-ia64.c (specify_resource): Initialize all of tmpl.

2005-04-19  David S. Miller  <davem@davemloft.net>

        * config/tc-sparc.c (md_assemble): If sparc_ip gives us a
        NULL insn, exit early.  Remove now spurious NULL checks.
        (sparc_ip): Use as_bad for unknown opcode errors, set *pinsn
        to NULL and exit.

2005-04-19  Jan Beulich  <jbeulich@novell.com>

        * symbols.h (symbol_find_base): Remove prototype.
        * symbols.c (save_symbol_name): Remove code section conditional upon
        STRIP_UNDERSCORE.
        (symbol_find): Remove.
        (symbol_find_base): Rename to symbol_find.
        * subsegs.c (section_symbol): Replace use of symbol_find_base with
        symbol_find.
        * config/obj-coff.c (tag_insert): Remove code section conditional
        upon STRIP_UNDERSCORE.
        (obj_coff_def): Likewise.
        (obj_coff_endef): Replace use of symbol_find_base with symbol_find.
        (coff_frob_symbol): Likewise.
        (yank_symbols): Likewise.
        (c_section_symbol): Likewise.
        * config/obj-coff.h (DO_NOT_STRIP): Remove.
        * config/tc-arm.c (symbol_locate): Remove code section conditional
        upon STRIP_UNDERSCORE.
        * config/tc-h8300.h (DO_NOT_STRIP): Remove.
        * config/tc-h8500.h (DO_NOT_STRIP): Remove.
        * config/tc-sh.h (DO_NOT_STRIP): Remove.
        * config/tc-w65.h (DO_NOT_STRIP): Remove.
        * config/tc-z8k.h (DO_NOT_STRIP): Remove.

2005-04-19  Andreas Schwab  <schwab@suse.de>

        * config/tc-ia64.c (md_assemble): Fix error message for wrong
        access to application registers.

2005-04-19  Jan Beulich  <jbeulich@novell.com>

        * config/te-sysv32.h: Remove.
        * Makefile.am (TARG_ENV_HFILES): Remove reference to
        config/te-sysv32.h.
        * Makefile.in (TARG_ENV_HFILES): Likewise.

2005-04-19  Jan Beulich  <jbeulich@novell.com>

        PR/847
        * config/tc-ia64.c (ia64_canonicalize_symbol_name): Re-allow zero-
        length symbols.

2005-04-18  Mark Kettenis  <kettenis@gnu.org>

        * config/tc-i386.c (md_begin): Allow hyphens in mnemonics.

2005-04-18  Maciej W. Rozycki  <macro@linux-mips.org>

        * config/tc-mips.c (normalize_constant_expr): Don't check for
        HAVE_32BIT_GPRS.
        (check_absolute_expr): Only call normalize_constant_expr() if
        HAVE_32BIT_GPRS.
        (mips_ip): Likewise.

        * config/tc-mips.c (check_absolute_expr): Fix formatting.

2005-04-18  Jan Beulich  <jbeulich@novell.com>

        * macro.c (free_token): New, freeing all the memory associated with a
        macro.
        (do_formals): Move initializers to ...
        (define_macro): ... here.
        (delete_macro): Convert passed in name to lower case. Warn when
        purging macro that doesn't exist. Use hash_jam instead of hash_delete.

2005-04-15  Maciej W. Rozycki  <macro@linux-mips.org>

        * config/tc-mips.c (normalize_constant_expr): Fix formatting.

2005-04-15  Jan Beulich  <jbeulich@novell.com>

        * config/obj-elf.c (obj_elf_struct): New.
        (elf_pseudo_table). Use it for .offset and .struct.

2005-04-14  Bob Wilson  <bob.wilson@acm.org>
            Sterling Augustine  <sterling@tensilica.com>

        * config/tc-xtensa.c (get_aligned_diff): Handle target_size larger
        than the section alignment.

2005-04-14  Bob Wilson  <bob.wilson@acm.org>
            H.J. Lu  <hongjiu.lu@intel.com>

        * config/tc-xtensa.h (struct xtensa_frag_type): Add lit_frchain field.
        * config/tc-xtensa.c (xg_translate_sysreg_op,
        xtensa_translate_old_userregs_ops,
        xtensa_find_unaligned_branch_targets,
        xtensa_find_unaligned_loops, xtensa_fix_close_loop_end_frags,
        relax_frag_add_nop): Support 64-bit host.
        (xtensa_mark_literal_pool_location, xtensa_move_literals): Use
        tc_frag_data lit_frchain and lit_seg fields instead of fr_var.

2005-04-14  Mark Kettenis  <kettenis@gnu.org>

        * configure.tgt: Add support for OpenBSD/sparc ELF.

        * configure.tgt: Set emulation for mips-*-openbsd*.
        Remove broken mips-dec-openbsd* config.
        * configure.in: Set default ABI for mips64-*-openbsd*.
        * configure: Regenerate.

2005-04-14  Maciej W. Rozycki  <macro@linux-mips.org>

        * config/tc-mips.c (macro) [ldd_std]: Don't attempt the GP
        optimization for constant addresses.

2005-04-14  Nick Clifton  <nickc@redhat.com>

        * as.c (main): Move parse_args before symbol_begin and frag_init
        so that the hash table size can be set before it is used.
        * hash.c: Use an unsigned long type for the size of the hash
        tables.
        * hash.h (set_gas_hash_table_size): Update the prototype.

2005-04-14  Alan Modra  <amodra@bigpond.net.au>

        * Makefile.am (NO_WERROR): Define.  Use instead of -Wno-error.
        * acinclude.m4: Include ../bfd/warning.m4.
        * configure.in: Invoke AM_BINUTILS_WARNINGS.
        * Makefile.in: Regenerate.
        * configure: Regenerate.
        * doc/Makefile.in: Regenerate.

2005-04-13  Maciej W. Rozycki  <macro@linux-mips.org>

        * config/tc-mips.c (IS_ZEXT_32BIT_NUM): New macro.
        (normalize_address_expr): New function to sign-extend address
        offsets that fit into 32 bits in 32-bit mode.
        (macro_build_ldst_constoffset): Use normalize_address_expr()
        instead of a handcoded sequence.
        (load_register): Likewise.  Report oversized numbers in a useful
        way.
        (macro) [ld_st, ldd_std]: Reject all oversized offsets, not only
        for constant addresses.  Report oversized numbers in a useful way.
        (mips_ip): Use normalize_address_expr() for addresses.

2005-04-12  Mark Kettenis  <kettenis@gnu.org>

        * config/tc-i386.c (output_insn): Handle VIA PadLock instructions
        similar to other instructions now that they're marked as ImmExt.

2005-04-12  Nick Clifton  <nickc@redhat.com>

        * hash.c (DEFAULT_SIZE): Delete.  Replace with:
        (gas_hash_table_size): New static variable.
        (set_gas_hash_table_size): New function:  Records a requested size
        for the hash tables.
        (get_gas_hash_table_size): New function: Return a prime number
        near the requested size of the hash table.
        (hash_new): Use get_gas_hash_table_size.
        * hash.h: Add a prototype for set_gas_hash_table_size.
        * as.c (show_usage): Add description of new switches: --hash-size
        and --reduce-memory-overheads.
        (option_values): Add OPTION_HASH_TABLE_SIZE and
        OPTION_REDUCE_MEMORY_OVERHEADS.
        (std_longpopts): Add entries for the new options.
        (parse_args): Handle the new options.
        * Makefile.am: Add a dependency of as.c on hash.h.
        * Makefile.in: Regenerate.
        * doc/as.texinfo: Document the new switches.
        * NEWS: Mention the new switches.

2005-04-12  Nick Clifton  <nickc@redhat.com>

        PR gas/818
        * config/tc-hppa.c (pre_defined_registers): Fix %farg[0-3]
        synonyms.

2005-04-12  Alan Modra  <amodra@bigpond.net.au>

        * Makefile.am: Run "make dep-am".
        * Makefile.in: Regenerate.

2005-04-11  Sterling Augustine  <sterling@tensilica.com>
            Bob Wilson  <bob.wilson@acm.org>

        * config/tc-xtensa.c (check_t1_t2_reads_and_writes): Fix typo.

2005-04-11  Mark Kettenis  <kettenis@gnu.org>

        * configure.tgt (generic_target): Add support for OpenBSD/i386 ELF.

2005-04-11  Jan Beulich  <jbeulich@novell.com>

        * NEWS: Mention these changes and their effects.
        * macro.c (get_token): Use is_name_beginner/is_part_of_name/
        is_name_ender.
        (check_macro): Likewise.
        (buffer_and_nest): Likewise. Permit multiple labels. Don't discard
        labels together with the closing pseudo-op.
        (macro_expand_body): Adjust comment. Range-check input before use.
        Adjust mis-spelled diagnostic. Use is_name_beginner.
        * read.c (try_macro): New.
        (read_a_source_file): New static variable last_eol. Don't list
        macro expansion lines more than once. Call try_macro.
        (s_macro): Set section of line_label to absolute instead of undefined.
        * doc/as.texinfo: Add information on the caveats of these changes.

2005-04-11  Alan Modra  <amodra@bigpond.net.au>

        * symbols.c (symbol_X_add_number): Change return type to "offsetT *".
        * symbols.h (symbol_X_add_number): Update prototype.

2005-04-10  Eric Christopher  <echristo@redhat.com>

        * symbols.c (symbol_X_add_number): Fix warning.

2005-04-10  H.J. Lu  <hongjiu.lu@intel.com>

        * config/tc-m68k.c (md_begin): Support 64bit host.
        (get_num): Support 64bit BFD on 32bit host.

2005-04-10  H.J. Lu  <hongjiu.lu@intel.com>

        * config/tc-mips.c (md_apply_fix3): Fix typos in BFD_RELOC_64.

2005-04-09  Alan Modra  <amodra@bigpond.net.au>

        * read.c (assign_symbol): Remove const from parm.  Fix xcalloc
        call.  Don't do the COFF hacks for multi-emulation gas.  Move
        demand_empty_rest_of_line back to caller.
        (s_set, equals): demand_empty_rest_of_line here.

        PR gas/827
        * as.h (rs_dummy): Define.
        * symbols.c (symbol_X_add_number): New function.
        * symbols.h (symbol_X_add_number): Declare.
        * stabs.c (aout_process_stab): Tidy symbol frag setting.
        * read.c (assign_symbol): New function, split out from s_set.
        Use symbol_find_or_make.  Leave fr_type of dummy frag as rs_dummy.
        Fix COFF hacks for multi-emulation gas.
        (s_set): Call assign_symbol.  Remove "register" keyword.
        (set_zero_frag): New function.
        (pseudo_set): Always check for assignment to section syms.
        Always set segment and frag of symbol, and likewise extern for
        aout/bout.  Handle assignment of sym=sym+/-const specially.  Don't
        special case exp.X_add_number non-zero for O_symbol expressions.
        (equals): Use assign_symbol.

2005-04-08  Bob Wilson  <bob.wilson@acm.org>

        * config/tc-xtensa.c (xtensa_create_xproperty_segments): Skip
        SEC_MERGE sections.

2005-04-06  H.J. Lu  <hongjiu.lu@intel.com>

        * config/tc-i386.c (tc_gen_reloc): Don't turn
        BFD_RELOC_X86_64_32S into BFD_RELOC_32.

2005-04-06  Nick Clifton  <nickc@redhat.com>

        * po/rw.po: New translation: Kinyarwanda
        * configure.in (ALL_LINGUAS): Add rw
        * configure: Regenerate.

2005-04-05  Sterling Augustine  <sterling@tensilica.com>
            Bob Wilson  <bob.wilson@acm.org>

        * config/tc-xtensa.c (branch_align_power): New.
        (xtensa_find_unaligned_branch_targets, get_aligned_diff,
        future_alignment_required): Use branch_align_power to check section
        alignment as well as xtensa_fetch_width when aligning branch targets.

2005-04-05  Bob Wilson  <bob.wilson@acm.org>

        * config/tc-xtensa.c: Warning fixes throughout.
        (xtensa_fetch_width): Change to unsigned.
        (assemble_nop, xtensa_find_unaligned_branch_targets,
        xtensa_find_unaligned_loops, xg_assemble_vliw_tokens,
        is_narrow_branch_guaranteed_in_range, xtensa_fix_close_loop_end_frags,
        min_bytes_to_other_loop_end, unrelaxed_frag_min_size,
        unrelaxed_frag_max_size, xtensa_fix_short_loop_frags,
        count_insns_to_loop_end, unrelaxed_frag_min_insn_count,
        get_text_align_max_fill_size, get_text_align_nop_count,
        get_text_align_nth_nop_size, get_noop_aligned_address,
        get_aligned_diff, convert_frag_align_next_opcode,
        convert_frag_immed_finish_loop, xtensa_create_property_segments,
        xtensa_create_xproperty_segments, xt_block_aligned_size): Clean up
        types, avoiding size_t and using offsetT and addressT appropriately.
        (get_text_align_power): Clean up types.  Avoid incorrect bound.
        (get_text_align_fill_size): Clean up types.  Restructure for clarity.

2005-04-04  H.J. Lu  <hongjiu.lu@intel.com>

        * config/tc-ia64.c (start_unwind_section): Undo the change
        of 2004-08-18.
        (generate_unwind_image, dot_endp): Likewise.

2005-04-01 David Mosberger  <davidm@hpl.hp.com>

        * config/tc-ia64.c (ia64_handle_align): Move le_nop and
        le_nop_stop arrays and initializers to file scope.
        (md_begin): When generating code for anything other than
        Itanium 1, use MMI instead of MFI NOP bundles as a filler.

2005-04-01  Jan Beulich  <jbeulich@novell.com>

        * config/tc-i386.c (output_imm): Also set sign flag for 64-bit push
        immediates.

2005-04-01  Jan-Benedict Glaw  <jbglaw@lug-owl.de>

        * NEWS: Mention [fdgh]_floating.
        * config/atof-vax.c: Fix some whitespace.
        * config/tc-vax.c (md_pseudo_table): Add "[fdgh]_floating".

2005-04-01  Nick Clifton  <nickc@redhat.com>

        * configure.in: Add a check for <unistd.h> providing a prototype
        for getopt() which is compatible with the one in
        include/getopt.h.  If so then define HAVE_DECL_GETOPT.
        * configure: Regenerate.
        * config.in (HAVE_DECL_GETOPT): Add.

2005-04-01  Jan Beulich  <jbeulich@novell.com>

        * config/tc-i386.c (s_bss): Call obj_elf_section_change_hook.

2005-04-01  Jan Beulich  <jbeulich@novell.com>

        * config/tc-i386.c (md_apply_fix3): Also handle BFD_RELOC_X86_64_32S.
        (tc_gen_reloc): Handle BFD_RELOC_X86_64_32S in the default case.

2005-03-30  Julian Brown  <julian@codesourcery.com>

        * config/tc-arm.c (arm_adjust_symtab): Rename
        bfd_elf32_is_arm_mapping_symbol_name to bfd_is_arm_mapping_symbol_name.

2005-03-30  Julian Brown  <julian@codesourcery.com>

        * config/tc-arm.c (mapping_state): Change documentation in function
        comment to cross-reference spec instead. Change type of mapping symbols
        to BSF_NO_TYPE.
        (arm_adjust_symtab): Don't change type of mapping symbols here.

2005-03-30  Aaron W. LaFramboise  <aaron98wiridge9@aaronwl.com>

        * as.h [NEED_DECLARATION_FFS] (ffs): Prototype and alphabetize.
        * config.in: Regenerate.
        * configure: Regenerate.
        * configure.in: Check for ffs decl and alphabetize.

2005-03-29  Daniel Jacobowitz  <dan@codesourcery.com>
            Phil Blundell  <philb@gnu.org>

        * config/tc-arm.c (arm_parse_reloc): Add TLS relocations.
        (md_apply_fix3): Mark TLS symbols.
        (tc_gen_reloc): Handle TLS relocations.
        (arm_fix_adjustable): Ignore TLS relocations.
        (s_arm_elf_cons): Support expressions after decorated symbols.

2005-03-29  Julian Brown  <julian@codesourcery.com>

        * config/tc-arm.c (marked_pr_dependency): New bitmap, bit N indicates
        whether personality routine index N has been output for this section.
        (mapping_state): tc_segment_info_data now struct not enum.
        (arm_elf_change_section): Likewise, and marked_pr_dependency is now
        handled on section change.
        (create_unwind_entry): Previous code to output dependency removed.
        (s_arm_unwind_fnend): Output dependency if it hasn't been done already
        for this section.
        * config/tc-arm.h (TC_SEGMENT_INFO_TYPE): Redefined as struct
        arm_segment_info_type.
        (arm_segment_info_type): New struct.

2005-03-28  Sterling Augustine  <sterling@tensilica.com>
            Bob Wilson  <bob.wilson@acm.org>

        * config/tc-xtensa.c (do_align_targets): Update comment.
        (xtensa_frob_label): Compute "freq" before possibly switching frags.
        Insert a LOOP_END frag before every loop target, and do not overload
        DESIRE_ALIGN_IF_TARGET frags with loop end information.
        (xg_assemble_vliw_tokens): Use do_align_targets.
        (xtensa_fix_target_frags): Remove code to convert a
        DESIRE_ALIGN_IF_TARGET frag to a LOOP_END frag when there is a
        negatable branch at the end of a loop.
        (frag_can_negate_branch): Delete.

2005-03-28  David Mosberger  <davidm@hpl.hp.com>
            H.J. Lu  <hongjiu.lu@intel.com>

        PR 803
        NEWS: Mention "-mtune=[itanium1|itanium2]".

        * config/tc-ia64.c (md): Add tune.
        (md_parse_option): Accepted "-mtune=[itanium1|itanium2]".
        (md_show_usage): Add "-mtune=[itanium1|itanium2]".
        (extra_goodness): Prefer M- and I-unit NOPs for itanium2. F and
        B unit NOPs are discouraged for McKinley-derived cores.
        (md_begin): Don't hardcode the "extra_goodness()" function in
        the comment...
        (ia64_init): Set md.tune to itanium2.

        * doc/as.texinfo: Add -mtune=[itanium1|itanium2]".
        * doc/c-ia64.texi: Likewise.

2005-03-27  Ian Lance Taylor  <ian@airs.com>

        * config/obj-coff.c (coff_frob_symbol): When crashing because of a
        bad C_EFCN symbol, print its name.

2005-03-25  Bob Wilson  <bob.wilson@acm.org>

        * config/tc-xtensa.c (use_longcalls): Delete.
        (xg_symbolic_immeds_fit): Check for direct calls and return TRUE if
        the use_longcalls flag is set.  Do this before checking the segment.
        (xg_expand_assembly_insn): Rearrange to use new do_expand flag.  Never
        expand direct calls at this point.
        (xtensa_set_frag_assembly_state): Set use_longcalls flag.
        (xtensa_find_unmarked_state_frags): Likewise.
        (md_assemble): Do not disable longcalls by setting is_specific_opcode.
        (xg_assemble_vliw_tokens): Switch frags when use_longcalls changes.
        (convert_frag_immed): Remove unnecessary check of is_specific_opcode.
        * config/tc-xtensa.h (xtensa_frag_type): Add use_longcalls flag.

2005-03-25  Hans-Peter Nilsson  <hp@bitrange.com>

        * config/tc-mmix.c, config/tc-mmix.h: Convert to ISO C90.

2005-03-25  Hans-Peter Nilsson  <hp@axis.com>

        * config/tc-cris.h: Convert to ISO C90.
        * config/tc-cris.c: Ditto.
        (md_estimate_size_before_relax): Remove obsolete comment for
        parameter "segment_type".
        (md_begin): Document reason for cast of hash_insert argument.
        (md_atof): Correct type of parameter "type".

2005-03-24  Nick Clifton  <nickc@redhat.com>

        * write.h (bit_fix_new): Remove redundant prototype.
        * config/atof-ieee.c: Convert to ISO-C90 and fix formatting.
        * config/obj-aout.c: Convert to ISO-C90 and fix formatting.
        * config/obj-aout.h: Convert to ISO-C90 and fix formatting.
        * config/obj-bout.c: Convert to ISO-C90 and fix formatting.
        * config/obj-bout.h: Convert to ISO-C90 and fix formatting.
        * config/obj-ecoff.c: Convert to ISO-C90 and fix formatting.
        * config/obj-ecoff.h: Convert to ISO-C90 and fix formatting.
        * config/obj-som.c: Convert to ISO-C90 and fix formatting.
        * config/obj-som.h: Convert to ISO-C90 and fix formatting.
        * config/tc-a29k.c: Convert to ISO-C90 and fix formatting.
        * config/tc-a29k.h: Convert to ISO-C90 and fix formatting.
        * config/tc-alpha.c: Convert to ISO-C90 and fix formatting.
        * config/tc-alpha.h: Convert to ISO-C90 and fix formatting.
        * config/tc-arc.c: Convert to ISO-C90 and fix formatting.
        * config/tc-arc.h: Convert to ISO-C90 and fix formatting.
        * config/tc-d10v.c: Convert to ISO-C90 and fix formatting.
        * config/tc-d10v.h: Convert to ISO-C90 and fix formatting.
        * config/tc-d30v.c: Convert to ISO-C90 and fix formatting.
        * config/tc-d30v.h: Convert to ISO-C90 and fix formatting.
        * config/tc-dlx.c: Convert to ISO-C90 and fix formatting.
        * config/tc-dlx.h: Convert to ISO-C90 and fix formatting.
        * config/tc-fr30.c: Convert to ISO-C90 and fix formatting.
        * config/tc-fr30.h: Convert to ISO-C90 and fix formatting.
        * config/tc-h8500.c: Convert to ISO-C90 and fix formatting.
        * config/tc-h8500.h: Convert to ISO-C90 and fix formatting.
        * config/tc-i370.c: Convert to ISO-C90 and fix formatting.
        * config/tc-i370.h: Convert to ISO-C90 and fix formatting.
        * config/tc-i960.c: Convert to ISO-C90 and fix formatting.
        * config/tc-ip2k.c: Convert to ISO-C90 and fix formatting.
        * config/tc-ip2k.h: Convert to ISO-C90 and fix formatting.
        * config/tc-m32r.c: Convert to ISO-C90 and fix formatting.
        * config/tc-m32r.h: Convert to ISO-C90 and fix formatting.
        * config/tc-m88k.c: Convert to ISO-C90 and fix formatting.
        * config/tc-m88k.h: Convert to ISO-C90 and fix formatting.
        * config/tc-mcore.c: Convert to ISO-C90 and fix formatting.
        * config/tc-mcore.h: Convert to ISO-C90 and fix formatting.
        * config/tc-mn10200.c: Convert to ISO-C90 and fix formatting.
        * config/tc-ns32k.c: Convert to ISO-C90 and fix formatting.
        * config/tc-ns32k.h: Convert to ISO-C90 and fix formatting.
        * config/tc-openrisc.c: Convert to ISO-C90 and fix formatting.
        * config/tc-openrisc.h: Convert to ISO-C90 and fix formatting.
        * config/tc-or32.c: Convert to ISO-C90 and fix formatting.
        * config/tc-or32.h: Convert to ISO-C90 and fix formatting.
        * config/tc-pdp11.h: Convert to ISO-C90 and fix formatting.
        * config/tc-pj.c: Convert to ISO-C90 and fix formatting.
        * config/tc-pj.h: Convert to ISO-C90 and fix formatting.
        * config/tc-tahoe.c: Convert to ISO-C90 and fix formatting.
        * config/tc-tic80.c: Convert to ISO-C90 and fix formatting.
        * config/tc-tic80.h: Convert to ISO-C90 and fix formatting.
        * config/tc-v850.c: Convert to ISO-C90 and fix formatting.
        * config/tc-v850.h: Convert to ISO-C90 and fix formatting.
        * config/tc-w65.c: Convert to ISO-C90 and fix formatting.
        * config/tc-w65.h: Convert to ISO-C90 and fix formatting.
        * config/tc-xstormy16.c: Convert to ISO-C90 and fix formatting.
        * config/tc-xstormy16.h: Convert to ISO-C90 and fix formatting.

2005-03-23  Jim Blandy  <jimb@redhat.com>

        * config/tc-arm.c (arm_adjust_symtab): Fetch elf_sym's binding
        attributes properly.

2005-03-23  Mike Frysinger  <vapier@gentoo.org>
            Nick Clifton  <nickc@redhat.com>

        * configure.tgt: Accept any C library to accompany a GNU Linux
        implementation, not just the GNU C library.
        * configure.in: Likewise.
        * configure: Regenerate.

2005-03-23  Nick Clifton  <nickc@redhat.com>

        * config/tc-tic30.c: Convert to ISO C90 formatting.
        * config/tc-tic30.h: Convert to ISO C90 formatting.
        * config/tc-pdp11.c: Convert to ISO C90 formatting.
        * config/atof-vax.c: Convert to ISO C90 formatting.

2005-03-21  Maciej W. Rozycki  <macro@mips.com>

        * config/tc-mips.c (mips_frob_file): Sort BFD_RELOC_MIPS16_LO16
        relocations correctly as well.
        (mips_fix_adjustable): Don't make BFD_RELOC_MIPS16_LO16
        relocations in mergeable sections section-relative either.

2005-03-21  Bob Wilson  <bob.wilson@acm.org>

        * config/tc-xtensa.c (md_apply_fix3): Recognize XTENSA_PLT relocations.

2005-03-21  Nick Clifton  <nickc@redhat.com>

        * config/tc-sh.c (sh_elf_final_processing): Fix compile time
        warning by providing a prototype for sh_symbian_find_elf_flags.

        * cgen.c (gas_cgen_parse_operand): Fix typo introduced by
        previous delta.

2005-03-21  Alan Modra  <amodra@bigpond.net.au>

        * configure.tgt: Handle setting of bfd_gas for fmt=multi targets
        along with other formats that set bfd_gas.  Remove unnecessary
        setting of bfd_gas.  Delete strongarm cases in generic_target
        switch.

2005-03-21  Alan Modra  <amodra@bigpond.net.au>

        PR gas/780
        * config/tc-m68k.c (TRUNC, SEXT): Define.
        (issbyte, isubyte, issword, isuword, isbyte, isword): Use the above.
        (m68k_ip): Truncate or sign extend expressions as appropriate.
        (get_num): Likewise.
        (md_apply_fix3): Use SEXT.

2005-03-21  Alan Modra  <amodra@bigpond.net.au>

        * Makefile.am (OBJ_FORMAT_CFILES): Prune config/obj-vms.c.
        (OBJ_FORMAT_HFILES): Prune config/obj-vms.h.
        (obj-vms.o): Delete rule.
        Run "make dep-am".
        * Makefile.in: Regenerate.
        * aclocal.m4: Regenerate.
        * doc/Makefile.in: Regenerate.
        * po/POTFILES.in: Regenerate.

2005-03-18  C Jaiprakash  <cjaiprakash@noida.hcltech.com>

        * config/tc-m68k.c (m68k_elf_final_processing): Set file specific
        flag for coldfire v4e.

2005-03-17  Bob Wilson  <bob.wilson@acm.org>

        * config/tc-xtensa.c (xg_apply_tentative_value): Rename to
        xg_apply_fix_value and return a value to indicate success.
        (md_pcrel_from): Skip check of fx_done.  Return 0 if not PC-relative.
        (xtensa_force_relocation): Remove checks for VTABLE relocs.
        (xtensa_validate_fix_sub): New.
        (xtensa_fix_adjustable): Remove check for external or weak symbols.
        (tc_gen_reloc): Move code to handle difference of symbols and code to
        apply tentative fix values to ...
        (md_apply_fix3): ...here.  Enable standard overflow checks for simple
        8, 16, and 32 bit relocations.  Apply fixes for slot-specific
        relocations when linkrelax flag is not set.
        * config/tc-xtensa.h (xtensa_validate_fix_sub): Add prototype.
        (TC_FORCE_RELOCATION_SUB_SAME, TC_VALIDATE_FIX_SUB): Define.

2005-03-17  Jan Beulich  <jbeulich@novell.com>

        * config/tc-i386.c (i386_scale): Beautify error message.
        (Intel syntax comments): Update.
        (struct intel_parser_s): Add fields in_offset, in_bracket, and
        next_operand.
        (intel_e04_1, intel_e05_1, intel_e05_1, intel_e09_1, intel_e10_1):
        Remove declarations.
        (intel_bracket_expr): Declare.
        (i386_intel_operand): Initialize new intel_parser fields. Wrap most
        of the function body in a loop allowing to split an operand into two.
        Replace calls to malloc and checks of it returning non-NULL with
        calls to xmalloc/xstrdup.
        (intel_expr): SHORT no longer handled here. Add comment indicating
        comparison ops need implementation.
        (intel_e04, intel_e04_1): Combine, replace recursion with loop.
        Check right operand of - does not specify a register when parsing
        the address of a memory reference.
        (intel_e05, intel_e05_1): Combine, replace recursion with loop.
        Check operands do not specify a register when parsing the address of
        a memory reference.
        (intel_e06, intel_e06_1): Likewise.
        (intel_e09, intel_e09_1): Combine, replace recursion with loop. Also
        handle SHORT as well as unary + and -. Don't accept : except for
        segment overrides or in direct far jump/call insns.
        (intel_brack_expr): New.
        (intel_e10, intel_e10_1): Combine, replace recursion with loop. Use
        intel_brack_expr.
        (intel_e11): Replace chain of if/else-if by switch, alloing fall-
        through in certain cases. Use intel_brack_expr. Add new diagnostics.
        Allow symbolic constants as register scale value.
        (intel_get_token): Replace call to malloc and check of return value
        with call to xmalloc. Change handling for FLAT to match MASM's.
        (intel_putback_token): Don't try to back up/free current token if
        that is T_NIL.

2005-03-16  Daniel Jacobowitz  <dan@codesourcery.com>

        * configure.tgt: Set emulation for arm-*-eabi*.
        * config/tc-arm.c (meabi_flags): Check EABI_DEFAULT.
        * config/te-armeabi.h: New file.
        * config/te-armlinuxeabi.h (EABI_DEFAULT): Define.
        * config/te-symbian.h: Include "te-armeabi.h".

2005-03-16  Nick Clifton  <nickc@redhat.com>

        * cgen.c (gas_cgen_parse_operand): Copy opinfo parameter into a
        local variable in case it is clobbered by the setjmp.

2005-03-16  Nick Clifton  <nickc@redhat.com>
            Ben Elliston  <bje@au.ibm.com>

        * configure.in (werror): New switch: Add -Werror to the
        compiler command line.  Enabled by default.  Disable via
        --disable-werror.
        * configure: Regenerate.

2005-03-16  Nick Clifton  <nickc@redhat.com>

        * config/obj-coff.h: Convert to ISO C90 formatting.
        * config/obj-coff.c: Convert to ISO C90 formatting.

2005-03-15  Zack Weinberg  <zack@codesourcery.com>

        * config/tc-arm.c (do_mla): Rename to do_mlas, take second
        is_mls parameter; do not diagnose Rm==Rd when is_mls.
        (do_mla, do_mls, five_bit_unsigned_immediate, bfci_lsb_and_width)
        (do_bfc, do_bfi, do_bfx, do_rbit, do_mov16, do_ldsttv4): New functions.
        (insns): Add ARMv6T2 instructions:
        bfc bfi mls movw movt rbit sbfx ubfx ldrht ldrsht ldrsbt strht.
        (arm_archs): Add V6T2 variants.

2005-03-15  Nick Clifton  <nickc@redhat.com>

        * NEWS: Add cutoff for changes in 2.16 release.

2005-03-15  Jan Beulich  <jbeulich@novell.com>

        * expr.c (operand): Merge handling of unary + into that for unary
        -, !, and ~.

2005-03-14  Eric Christopher  <echristo@redhat.com>

        * config/tc-mips.c: Include dw2gencfi.h.
        (mips_cfi_frame_initial_instructions): New.
        * config/tc-mips.h (TARGET_USE_CFIPOP): Define.
        (tc_cfi_frame_initial_instructions): Ditto.
        (DWARF2_DEFAULT_RETURN_COLUMN): Ditto.
        (DWARF2_CIE_DATA_ALIGNMENT): Ditto.
        * Makefile.am: Update dependencies.
        * Makefile.in: Regenerate.

2005-03-15  Alan Modra  <amodra@bigpond.net.au>

        * po/es.po: Commit new Spanish translation.

2005-03-14  Alan Modra  <amodra@bigpond.net.au>

        * po/tr.po: Commit new Turkish translation.

2005-03-12  Zack Weinberg  <zack@codesourcery.com>

        * config/tc-arm.c (tinsns): Add ARMv6K instructions sev, wfe,
        wfi, yield.

2005-03-11  Daniel Jacobowitz  <dan@codesourcery.com>

        * config-gas.com: Mark vax-vms as obsolete.
        * configure.in: Remove fmt=vms support.
        * config.in: Regenerate.
        * configure: Regenerate.
        * config/obj-vms.h, config/obj-vms.c, config/vms-conf.h: Remove.

2005-03-10  Sterling Augustine  <sterling@tensilica.com>
            Bob Wilson  <bob.wilson@acm.org>

        * config/tc-xtensa.c (finish_vinsn): Include the last instruction slot
        when checking if xg_resolve_literals needs to be called.
        * config/tc-xtensa.h: Fix spelling typo in a comment.

2005-03-10  Jan Beulich  <jbeulich@novell.com>

        * config/tc-tic54x.h (tic54x_macro_info): Change parameter type.
        * config/tc-tic54x.c (tic54x_macro_info): Likewise. Replace hand-
        crafted structure declarations with the types from macro.h.

2005-03-09  Richard Sandiford  <rsandifo@redhat.com>

        * config/tc-mips.c (s_cpsetup): Use '__gnu_local_gp' instead of '_gp'
        for -mno-shared optimization.

2005-03-09  Richard Sandiford  <rsandifo@redhat.com>

        * config/tc-mips.c (MAX_VR4130_NOPS, MAX_DELAY_NOPS): New macros.
        (MAX_NOPS): Bump to 4.
        (mips_fix_vr4130): New variable.
        (nops_for_vr4130): New function.
        (nops_for_insn): Use MAX_DELAY_NOPS rather than MAX_NOPS.  Use
        nops_for_vr4130 if working around VR4130 errata.
        (OPTION_FIX_VR4130, OPTION_NO_FIX_VR4130): New macros.
        (md_longopts): Add -mfix-vr4130 and -mno-fix-vr4130.
        (md_parse_option): Handle them.
        (md_show_usage): Print them.
        * doc/c-mips.texi: Document -mfix-vr4130 and -mno-fix-vr4130.

2005-03-09  Richard Sandiford  <rsandifo@redhat.com>

        * config/tc-mips.c (append_insn): Remove cop_interlocks test from
        branch delay code.

2005-03-09  Richard Sandiford  <rsandifo@redhat.com>

        * config/tc-mips.h (mips_flush_pending_output): Delete.
        (mips_emit_delays): Declare.
        (md_flush_pending_output): Use mips_emit_delays.
        * config/tc-mips.c (mips_no_prev_insn): Remove parameter; always forget
        the previous instructions.
        (md_begin, append_insn, md_parse_option): Update callers.
        (mips_emit_delay): Remove parameter.  Move INSNS != 0 code to
        start_noreorder.
        (mips_align, s_change_sec, s_cons, s_float_cons, s_gpword)
        (s_gpdword): Update callers.
        (start_noreorder, end_noreorder): New functions.
        (macro, macro2, mips16_macro, s_mipsset): Use them instead of
        manipulating mips_opts or prev_nop_frag directly.
        (mips_flush_pending_output): Delete.

2005-03-09  Richard Sandiford  <rsandifo@redhat.com>

        * config/tc-mips.c (mips_move_labels): New function, taken from...
        (append_insn, mips_emit_delays): ...here.

2005-03-09  Richard Sandiford  <rsandifo@redhat.com>

        * config/tc-mips.c (MAX_NOPS): New macro.
        (history): Resize to 1 + MAX_NOPS.
        (fix_vr4120_class): New enumeration.
        (vr4120_conflicts): New variable.
        (init_vr4120_conflicts): New function.
        (md_begin): Call it.
        (insn_uses_reg): Constify first argument.
        (classify_vr4120_insn, insns_between, nops_for_insn, nops_for_sequence)
        (nops_for_insn_or_target): New functions.
        (append_insn): Use the new nops_for_* functions instead of inline
        delay checks.  Generalize prev_nop_frag handling to handle an
        arbitrary history length.  Insert nops into the history buffer
        once the number of nops in prev_nop_frag is fixed.
        (emit_delays): Use nops_for_insn instead of inline delay checks.

2005-03-09  Richard Sandiford  <rsandifo@redhat.com>

        * config/tc-mips.c (append_insn): Remove now-redundant nops != 0
        check from branch delay code.  Remove unnecessary check for branches.

2005-03-09  Richard Sandiford  <rsandifo@redhat.com>

        * config/tc-mips.c (dummy_opcode): Delete.
        (nop_insn, mips16_nop_insn): New variables.
        (NOP_INSN): New macro.
        (insn_length, create_insn, install_insn, move_insn, add_fixed_insn)
        (add_relaxed_insn, insert_into_history, emit_nop): New functions.
        (md_begin): Initialize nop_insn and mips16_nop_insn.
        (append_insn): Use the new emit_nop function to add nops, recording
        them in the history buffer.  Use add_fixed_insn or add_relaxed_insn
        to reserve room for the instruction and install_insn to install the
        final form.  Use insert_into_history to record the instruction in
        the history buffer.  Use move_insn to do delay slot filling.
        (mips_emit_delays): Use add_fixed_insn instead of the emit_nop macro.
        (macro_build, mips16_macro_build, macro_build_lui, mips_ip)
        (mips16_ip): Use create_insn to initialize mips_cl_insns.

2005-03-09  Richard Sandiford  <rsandifo@redhat.com>

        * config/tc-mips.c (INSERT_BITS, EXTRACT_BITS, INSERT_OPERAND)
        (EXTRACT_OPERAND, MIPS16_INSERT_OPERAND, MIPS16_EXTRACT_OPERAND): New.
        (insn_uses_reg, reg_needs_delay, append_insn, macro_build)
        (mips16_macro_build, macro_build_lui, mips16_macro, mips_ip)
        (mips16_ip): Use the new macros instead of explicit masks and shifts.

2005-03-09  Richard Sandiford  <rsandifo@redhat.com>

        * config/tc-mips.c (mips_cl_insn): Replace the valid_p, delay_slot_p
        and extended_p fields with a single fixed_p field.
        (append_insn, mips_no_prev_insn): Adjust accordingly.

2005-03-09  Richard Sandiford  <rsandifo@redhat.com>

        * config/tc-mips.c (mips_cl_insn): Replace reloc_type array with
        a single mips16_absolute_jump_p bit.
        (append_insn): Adjust accordingly.

2005-03-09  Richard Sandiford  <rsandifo@redhat.com>

        * config/tc-mips.h (mips_cl_insn): Move definition to...
        * config/tc-mips.c (mips_cl_insn): ...here.  Add new fields:
        frag, where, fixp, reloc_type, valid_p, noreorder_p, delay_slot_p
        and extended_p.
        (history): New variable.
        (prev_insn, prev_prev_insn, prev_insn_valid, prev_insn_frag)
        (prev_insn_where, prev_insn_reloc_type, prev_insn_fixp)
        (prev_insn_is_delay_slot, prev_insn_unreordered, prev_insn_extended)
        (prev_prev_insn_unreordered): Delete.
        (reg_needs_delay, append_insn, mips_no_prev_insn, mips_emit_delays)
        (macro_start): Replace uses of prev_insn* with the equivalent history[]
        field.

2005-03-08  Daniel Jacobowitz  <dan@codesourcery.com>

        * doc/Makefile.am: Update as.info dependencies.
        * aclocal.m4, Makefile.in, doc/Makefile.in: Regenerated.

2005-03-08  Jan Beulich  <jbeulich@novell.com>

        * doc/as.texinfo: Add sentence to indicate redefining a macro is an
        error, and point to .purgem documentation if someone really needs
        re-definitions.
        * NEWS: Mention macro redefinition is now an error.

2005-03-08  Jan Beulich  <jbeulich@novell.com>

        * config/tc-ia64.c (emit_one_bundle): Track last slot user insn was
        emitted to. Add more precise diagnostics for non-fitting insns based
        on that. Eliminate now superfluous special casing of MLX. Clear out
        slot information when dropping an insn.

2005-03-08  Jan Beulich  <jbeulich@novell.com>

        * config/tc-ia64.c (parse_section_name): Rename to...
        (cross_section): In addition to separating the name from the rest of
        the arguments, also carry out the operation.
        (dot_xdata): Use cross_section.
        (dot_float_cons): Likewise.
        (dot_xstringer): Likewise.
        (dot_xdata_ua): Likewise.
        (dot_float_cons_ua): Likewise. Pass float_cons, not stmt_float_cons.

2005-03-05  Alan Modra  <amodra@bigpond.net.au>

        * po/gas.pot: Regenerate.

2005-03-04  David Daney  <ddaney@avtrex.com>

        * config/tc-mips.c (macro_build_lui): Use '__gnu_local_gp'
        instead of '_gp' for -mno-shared optimization.
        (s_cpload): Ditto.
        (s_abicalls): Document it in the comment.
        (md_show_usage): Document the -mno-shared option.

2005-03-04  Richard Sandiford  <rsandifo@redhat.com>

        * config/tc-mips.c (mips_set_options): Add sym32 field.
        (mips_opts): Initialize it.
        (HAVE_32BIT_ADDRESSES): Set to true if pointers are 32 bits wide.
        (HAVE_64BIT_ADDRESSES): Redefine as !HAVE_32BIT_ADDRESSES.
        (HAVE_32BIT_SYMBOLS, HAVE_64BIT_SYMBOLS): New macros.
        (load_address): Use HAVE_64BIT_SYMBOLS instead of HAVE_64BIT_ADDRESSES
        when deciding whether to use a symbolic %highest/%higher expansion.
        (macro): Likewise.  Remove o64/n32 linux hack.  Always use
        ADDRESS_ADD*_INSN for address addition in the expansion of "dla"
        and "la".  Handle constants separately from symbolic expressions in
        the "ld_st:" case, using 64-bit arithmetic if HAVE_64BIT_ADDRESSES
        and using load_register to load the high part of the address.
        (OPTION_MSYM32, OPTION_NO_MSYM32): New macros.
        (OPTION_ELF_BASE): Bump by 2.
        (md_longopts): Add entries for -msym32 and -mno-sym32.
        (md_parse_option): Handle them.
        (usage): Document them.
        (s_mipsset): Handle ".set sym32" and ".set nosym32".
        (s_cpload, s_cpsetup): Use HAVE_64BIT_SYMBOLS instead of
        HAVE_64BIT_ADDRESSES to detect 64-bit values of "_gp".
        * doc/c-mips.texi: Document ".set sym32", ".set nosym32",
        -msym32 and -mno-sym32.

2005-03-03  Thiemo Seufer  <seufer@csv.ica.uni-stuttgart.de>

        * config/tc-mips.c (load_address): Implement GP optimization
        for 64bit address space non-PIC. Fix formatting.
        (macro): Likewise. Simplify code.
        (md_parse_option): Don't bail out if -G 0 is set for PIC code.
        (mips_after_parse_args): Simplify code.

2005-03-03  Nick Clifton  <nickc@redhat.com>

        * expr.c (operand): Remove redundant code enclosed by #ifdef
        RELAX_PAREN_GROUPING....#endif.

        * config/tc-mn10200.c (tc_gen_reloc): Handle the case where the
        reloc is the difference of two symbols defined in the same
        section.

        * config/tc-iq2000.c (line_comment_chars): Include the # character
        as otherwise this breaks #APP/#NO_APP processing.

2005-03-03  Ramana Radhakrishnan  <ramana.radhakrishnan@codito.com>

        * config/tc-arc.c(md_assemble): Remove dead code for handling
        immediate indexing of ld and st .

2005-03-02  Daniel Jacobowitz  <dan@codesourcery.com>
            Joseph Myers  <joseph@codesourcery.com>

        * config/tc-mips.c (percent_op): Add %tlsgd, %tlsldm, %dtprel_hi,
        %dtprel_lo, %tprel_hi, %tprel_lo, and %gottprel.
        (parse_relocation): Check for a word break after a relocation
        operator.
        (md_apply_fix3): Handle TLS relocations, and mark thread-local
        symbols.

2005-03-02  Alan Modra  <amodra@bigpond.net.au>

        * config/tc-ppc.c (ppc_fix_adjustable <ELF>): Remove bogus checks.

2005-03-02  Jan Beulich  <jbeulich@novell.com>

        * as.c (main): Use unlink_if_ordinary instead of unlink.
        * messages.c (as_fatal): Likewise.

2005-03-02  Jan Beulich  <jbeulich@novell.com>

        * config/tc-i386.c (build_modrm_byte): Add lock prefix for cr8...15
        accesses.
        (parse_register): Allow cr8...15 in all modes.

2005-03-02  Jan Beulich  <jbeulich@novell.com>

        * config/tc-i386.c (intel_e11): If not followed by T_PTR, treat T_BYTE
        etc. like normal symbol references (T_ID).

2005-03-02  Alan Modra  <amodra@bigpond.net.au>

        * symbols.c (fb_label_name): Fix silly thinko in last change.

2005-03-02  Alan Modra  <amodra@bigpond.net.au>

        * expr.c (integer_constant): Remove TARGET_WORD_SIZE hack.
        * config/tc-m68k.h (TARGET_WORD_SIZE): Delete.

        * symbols.c (fb_label_name): Allow an augend of 2 for mmix.

2005-03-01  Ramana Radhakrishnan  <ramana.radhakrishnan@codito.com>

        PR gas/708
        * config/tc-arc.c (md_assemble): Initialize suffix for extension
        suffixes also.

2005-03-01  Alan Modra  <amodra@bigpond.net.au>

        * config/obj-coff.c (fixup_segment): Delete sy_mri_common assertion.

        * as.h (assert): Warning fix.
        * expr.c (expr): Correct assertion.
        * read.c (s_comm_internal): Remove assertion.
        * write.c (relax_segment): Enable vma assertion only for BFD_ASSEMBLER.
        (fixup_segment): Remove assertion.
        * config/tc-dlx.c (machine_ip): Remove untrue assertions.
        (md_apply_fix3): Likewise.
        * config/tc-i370.c (md_begin): Correct assertion.
        (i370_macro): Warning fix for assertion.

2005-03-01  Alan Modra  <amodra@bigpond.net.au>

        * configure.in (AC_C_BIGENDIAN): Invoke.
        * configure: Regenerate.
        * write.c (write_object_file <!BFD_ASSEMBLER>): Don't use sizeof
        host variable to set string header size.
        * config/obj-aout.c (obj_header_append): Don't use host structs.
        (obj_symbol_to_chars): Likewise.
        (obj_emit_strings): Likewise.  Use the passed in output pointer.
        * config/obj-aout.h (H_GET_FILE_SIZE): Include H_GET_LINENO_SIZE.
        * config/obj-bout.c (obj_emit_relocations): Use md_reloc_size,
        not sizeof host struct.
        (obj_header_append, obj_symbol_to_chars): Don't use host structs.
        (obj_emit_strings): Likewise.
        * config/obj-bout.h (EXEC_BYTES_SIZE): Define.
        (N_TXTOFF, H_GET_FILE_SIZE, H_GET_HEADER_SIZE): Use instead of
        sizeof host struct.
        (H_SET_SYMBOL_TABLE_SIZE): Hard code sym size rather than using
        sizeof host struct.
        (host_number_to_chars): Define.
        * config/obj-hp300.c (hp300_header_append): Don't use sizeof
        host internal struct to set header sizes.
        * config/tc-i960.c (md_number_to_field): Warning fix.
        (md_ri_to_chars): Use host byte order.
        (get_cdisp, md_apply_fix3): Warning fix.
        * config/tc-m68k.c (md_assemble): Don't use sizeof host short.

2005-02-28  Ramana Radhakrishnan  <ramana.radhakrishnan@codito.com>

        * doc/c-arc.texi: Update documentation about ARC's extension
        instructions.

2005-02-27  Svein E. Seldal  <svein@dev.seldal.com>

        * config/tc-tic4x.c (tic4x_gen_to_words): Changed mail
        address for myself.

2005-02-23  Alan Modra  <amodra@bigpond.net.au>

        * cgen.c: Warning fixes.
        * config/tc-arc.c: Likewise.
        * config/tc-arm.c: Likewise.
        * config/tc-avr.c: Likewise.
        * config/tc-d10v.c: Likewise.
        * config/tc-d30v.c: Likewise.
        * config/tc-frv.c: Likewise.
        * config/tc-frv.h: Likewise.
        * config/tc-h8300.c: Likewise.
        * config/tc-h8500.c: Likewise.
        * config/tc-i370.c: Likewise.
        * config/tc-i960.c: Likewise.
        * config/tc-ia64.c: Likewise.
        * config/tc-ip2k.c: Likewise.
        * config/tc-m68hc11.c: Likewise.
        * config/tc-maxq.c: Likewise.
        * config/tc-mcore.c: Likewise.
        * config/tc-mips.c: Likewise.
        * config/tc-msp430.c: Likewise.
        * config/tc-pj.c: Likewise.
        * config/tc-ppc.c: Likewise.
        * config/tc-ppc.h: Likewise.
        * config/tc-s390.c: Likewise.
        * config/tc-sh.c: Likewise.
        * config/tc-sh64.c: Likewise.
        * config/tc-tic4x.c: Likewise.
        * config/tc-tic80.c: Likewise.
        * config/tc-v850.c: Likewise.
        * config/tc-vax.c: Likewise.
        * config/tc-w65.c: Likewise.
        * config/tc-xstormy16.c: Likewise.
        * config/tc-z8k.c: Likewise.

2005-02-22  Catherine Moore  <clm@cm00re.com>

        * read.c (read_a_source_file): Reinstate TC_EQUAL_IN_INSN test.
        * doc/internals.texi (TC_EQUAL_IN_INSN): Reinstate.

2005-02-22  Eric Christopher  <echristo@redhat.com>

        * config/tc-mips.c (struct proc): Change isym to
        func_sym. New member func_end_sym.
        (s_mips_ent): Update.
        (s_mips_end): Ditto. Add code to compute function size.

2005-02-22  Alan Modra  <amodra@bigpond.net.au>

        * read.c: Warning fixes.
        * config/obj-elf.c: Likewise.

2005-02-22  Maciej W. Rozycki  <macro@mips.com>

        * config/tc-mips.c (append_insn): Call dwarf2_emit_insn() before
        emitting insn.

2005-02-21  H.J. Lu  <hongjiu.lu@intel.com>

        * config/obj-coff.c (obj_coff_section): Replace SEC_SHARED with
        SEC_COFF_SHARED.

        * config/tc-tic54x.c (tic54x_bss): Replace SEC_BLOCK with
        SEC_TIC54X_BLOCK.
        (demand_empty_rest_of_line): Likewise.
        (tic54x_sblock): Likewise.
        (tic54x_clink): Replace with SEC_CLINK with SEC_TIC54X_CLINK.

2005-02-21  Alan Modra  <amodra@bigpond.net.au>

        * read.c (address_bytes): New function.
        (TC_ADDRESS_BYTES): Default for BSD_ASSEMBLER to address_bytes.
        (potable): Add "dc.a".
        (cons_worker): Handle "dc.a".
        * doc/internals.texi (TC_ADDRESS_BYTES): Document.

2005-02-21  Alan Modra  <amodra@bigpond.net.au>

        * input-file.c (input_file_open): Rearrange to avoid warning.

2005-02-19  Alan Modra  <amodra@bigpond.net.au>

        * config/tc-hppa.h (TC_EQUAL_IN_INSN): Delete.
        * read.c (read_a_source_file): Remove TC_EQUAL_IN_INSN test.
        * doc/internals.texi (TC_EQUAL_IN_INSN): Delete.

2005-02-18  Thiemo Seufer  <seufer@csv.ica.uni-stuttgart.de>

        * config/tc-mips.c (macro_build_ldst_constoffset): Fail on $at
        uses after .set noat.
        (load_address): Likewise.
        (macro): Likewise. Don't try to avoid $at use by sacrificing
        the target register before it is stored, it won't work.

2005-02-17  James E Wilson  <wilson@specifixinc.com>

        * config/tc-ia64.c (emit_one_bundle): Stop filling a bundle if we
        see an instruction that specifies a template.

2005-02-18  Alan Modra  <amodra@bigpond.net.au>

        * config/tc-openrisc.c (openrisc_relax_frag): Delete unused function.
        * config/tc-sparc.c (sparc_ip): Make op_exp static to silence warnings.
        * config/tc-tic80.c (build_insn): Init insn[1] to silence warning.

2005-02-17  H.J. Lu  <hongjiu.lu@intel.com>

        * NEWS: Mention "-mhint.b=[ok|warning|error]".

        * config/tc-ia64.c (md): Add hint_b.
        (emit_one_bundle): Handle md.hint_b for "hint".
        (md_parse_option): Accepted "-mhint.b=[ok|warning|error]".
        (md_show_usage): Add "-mhint.b=[ok|warning|error]".
        (ia64_init): Set md.hint_b to error.
        (md_assemble): Handle md.hint_b for "hint.b".

        * doc/as.texinfo: Add "-mhint.b=[ok|warning|error]".
        * doc/c-ia64.texi: Likewise.

2005-02-17  Alan Modra  <amodra@bigpond.net.au>

        * tc.h (struct relax_type, relax_typeS): Move from here..
        * as.h: ..to here.  Make rlx_forward and rlx_backward an offsetT.
        * ecoff.c (ecoff_new_file): Add appfile param.
        * ecoff.h (ecoff_new_file): Likewise.
        * itbl-lex.h: New file.
        * itbl-lex.l: Include itbl-lex.h.
        * itbl-parse.y: Likewise.
        (insntbl_line, yyparse, yylex): Move to itbl-lex.h.
        * read.c (s_app_file_string): Mark appfile possibly unused.
        * subsegs.c (seg_not_empty_p): Make sec possibly unused.
        * subsegs.h (struct seg_info_trash): Delete.
        (seg_info): Use segment_info_type instead.
        * config/obj-coff.c (struct filename_list): Make filename const char *.
        * config/obj-ecoff.h (obj_app_file): Pass app to ecoff_new_file.
        * config/obj-elf.c (elf_file_symbol): Similarly.
        * config/tc-a29k.c (md_apply_fix3): Make val a valueT.  Don't use
        signed right shift.
        * config/tc-arc.c (md_operand): Warning fix.
        * config/tc-arm.c (arm_parse_reloc): Only define when OBJ_ELF.
        (md_begin): Rearrange #if defined OBJ_COFF || defined OBJ_ELF.
        * config/tc-cris.h (TC_IMPLICIT_LCOMM_ALIGNMENT): Use do while.
        * config/tc-frv.c (frv_force_relocation): Warning fix.
        * config/tc-m68k.c (md_parse_option): Delete unused var.
        * config/tc-mcore.c (mylog2): Rename from log2 throughout.
        * config/tc-sparc.c: Likewise.
        (s_common): Warning fix.
        * config/tc-mips.c (append_insn): Use unsigned long long expressions.
        * config/tc-mmix.c (PUSHJSTUB_MAX, PUSHJSTUB_MIN): Define from
        addressT.
        * config/tc-s390.c (s390_insn): Delete test of unsigned >= 0.
        * config/tc-sh.c (sh_cfi_frame_initial_instructions,
        sh_regname_to_dw2regnum): Only define for OBJ_ELF.
        * config/tc-tic4x.c (tic4x_insert_reg): Use ISLOWER.
        (tic4x_do_align): Use TIC_NOP_OPCODE.
        * config/tc-tic4x.h (TIC_NOP_OPCODE): Rename from NOP_OPCODE.
        * config/tc-vax.c: Include netinet/in.h.
        (tc_headers_hook): Formatting.
        * config/tc-xstormy16.c (md_pcrel_from_section): Correct parens.

2005-02-17  Jan Beulich  <jbeulich@novell.com>

        * config/tc-ia64.c (ia64_parse_name): Don't advance 'name' when
        parsing inN, locN, outN. Set 'idx' to offset register number starts
        at. Don't handle numbers with leading zeroes or beyond 95. Remove
        pointless cast.

2005-02-16  Thiemo Seufer  <seufer@csv.ica.uni-stuttgart.de>

        * config/tc-mips.c (load_address): Fix formatting.
        (macro): Don't use AT if .set noat is in effect. Fix formatting.
        Catch macros which are unexpandable without AT. Remove duplicate
        zeroing of used_at.
        (macro2): Remove duplicate zeroing of used_at.

2005-02-16  Alan Modra  <amodra@bigpond.net.au>

        * dw2gencfi.c (output_cie, output_fde): Use DW_CFA_nop rather
        than zero.

2005-02-15  Nigel Stephens  <nigel@mips.com>
            Maciej W. Rozycki  <macro@mips.com>

        * config/tc-mips.c (reloc_needs_lo_p): Handle
        BFD_RELOC_MIPS16_HI16_S.
        (fixup_has_matching_lo_p): Handle BFD_RELOC_MIPS16_LO16.
        (append_insn): Add BFD_RELOC_MIPS16_GPREL, BFD_RELOC_MIPS16_HI16_S
        and BFD_RELOC_MIPS16_LO16 to relocs to suppress overflow
        complaints on.
        (mips16_ip): Resolve BFD_RELOC_MIPS16_HI16_S,
        BFD_RELOC_MIPS16_HI16 and BFD_RELOC_MIPS16_LO16 for constants.
        Call my_getSmallExpression() to parse percent operators.
        (percent_op_match, mips_percent_op): Separate definitions.
        (mips16_percent_op): Define percent operators for the MIPS16 mode.
        (parse_relocation): Handle the MIPS16 mode using
        mips16_percent_op.
        (md_apply_fix3): Handle BFD_RELOC_MIPS16_HI16,
        BFD_RELOC_MIPS16_HI16_S and BFD_RELOC_MIPS16_LO16.

2005-02-15  Jan Beulich  <jbeulich@novell.com>

        * config/tc-ia64.c (md_apply_fix3): Call ia64_gen_real_reloc_type
        instead of explicitly dealing with the translation; exclude
        relocations that are already pcrel, however.

2005-02-15  Jan Beulich  <jbeulich@novell.com>

        * config/tc-ia64.c: Include limits.h (if available).
        (gr_values[0]): Set path to INT_MAX.
        (dot_reg_val): Don't allow changing value of r0. Limit range of
        general registers at r127.
        (specify_resource): Default resource index is -1. Don't set resource
        index (in case IA64_RS_RSE) without setting the specific flag.
        (note_register_values): Check operand is O_constant before tracking
        input value of moves. Add tracking for dep.z with constant inputs.
        (print_dependency): Resource index of specific resource may be zero.
        (check_dependencies): Likewise.

2005-02-15  Jan Beulich  <jbeulich@novell.com>

        * config/tc-ia64.c (parse_operands): New local variables reg1, reg2,
        reg_class. Check operands and emit diagnostics for illegal use of
        registers.

2005-02-15  Jan Beulich  <jbeulich@novell.com>

        * config/tc-ia64.c (ia64_gen_real_reloc_type): Define and initialize
        new variables type, suffix, and width. Handle
        BFD_RELOC_IA64_DIR(32|64)[LM]SB in FUNC_LT_FPTR_RELATIVE case.
        Handle BFD_RELOC_IA64_DIR64[LM]SB in FUNC_TP_RELATIVE case. Add
        FUNC_DTP_MODULE case. Handle BFD_RELOC_IA64_DIR32[LM]SB in
        FUNC_DTP_RELATIVE case. Return incoming relocation type if
        BFD_RELOC_IA64_IPLT[LM]SB in FUNC_IPLT_RELOC case. Generate warning
        if unable to translate relocation type, using the new variables.

2005-02-15  Jan Beulich  <jbeulich@novell.com>

        * config/tc-ia64.h (ia64_symbol_chars): Declare.
        (ty_symbol_chars): Define.
        * config/tc-ia64.c (ia64_symbol_chars): Define.

2005-02-15  Jan Beulich  <jbeulich@novell.com>

        * config/tc-ia64.c (ia64_parse_name): Only update next character if
        input_line_pointer was advanced.

2005-02-14  Kaz Kojima  <kkojima@rr.iij4u.or.jp>

        * config/tc-sh.c (md_apply_fix3): Add parentheses around &
        within |.

2005-02-13  Jan Beulich  <jbeulich@novell.com>

        * config/tc-ia64.c (md_parse_option): Handle -xnone and -xdebugn.
        (md_show_usage): Add -xnone, -xdebugn, and -xdebugx. Relocate default
        indicator.
        (ia64_init): Set md.detect_dv.
        (ia64_start_line): New static variable warned. Warn only once when
        encountering explicit stops in automatic mode.
        * doc/c-ia64.texi: Describe -xnone, -xdebugn, and -xdebugx.
        * NEWS: Mention new default mode.

2005-02-13  Jan Beulich  <jbeulich@novell.com>

        * config/tc-ia64.c (dot_rot): Add comment that name strings should
        be freed when wiping out previous state. Canonicalize names before
        use. Free name string when detecting redefinition.
        (dot_pred_rel): Call generic expression parser to process arguments.
        Handle O_register case for individual predicates and O_subtract for
        ranges.
        (ia64_parse_name): Canonicalize name before looking it up in dynamic
        register hash.
        (ia64_canonicalize_symbol_name): Strip off all trailing # characters.
        Warn if multiple found, issue error if resulting symbol name has zero
        length.
        (dot_alias): Canonicalize name before use.

2005-02-11  H.J. Lu  <hongjiu.lu@intel.com>

        * config/tc-ia64.c (unwind_diagnostic): Return -1 for warning
        and 0 for error.
        (in_procedure): Return -1 for warning.
        (in_prologue): Likewise.
        (in_body): Likewise.

2005-02-11  H.J. Lu  <hongjiu.lu@intel.com>

        * config/tc-ia64.c (dot_xdata): Undo the last change.
        (dot_float_cons): Likewise.
        (dot_xstringer): Likewise.
        (dot_xdata_ua): Likewise.
        (dot_float_cons_ua): Likewise.

2005-02-11  H.J. Lu  <hongjiu.lu@intel.com>

        * NEWS: Mention "-munwind-check=[warning|error]".

        * config/tc-ia64.c (md): Add unwind_check.
        (unwind_diagnostic): New.
        (in_procedure): Call unwind_diagnostic when a directive isn't
        in procedure.
        (in_prologue): Call unwind_diagnostic when a directive isn't in
        prologue.
        (in_body): Call unwind_diagnostic when a directive isn't in
        body region.
        (dot_endp): Set md.unwind_check to error before calling
        in_procedure and restore it after. When the name is missing or
        couldn't be found, use the one from the last .proc if
        md.unwind_check isn't error. Warn if md.unwind_check is
        warning.
        (md_parse_option): Handle "-munwind-check=[warning|error]".
        (md_show_usage): Add "-munwind-check=[warning|error]".
        (ia64_init): Set md.unwind_check to warning.

        * doc/as.texinfo: Add "-munwind-check=[none|warning|error]".
        * doc/c-ia64.texi: Likewise.

2005-02-11  Jan Beulich  <jbeulich@novell.com>

        * config/tc-ia64.h (LEX_AT): Include LEX_BEGIN_NAME.
        (LEX_QM): Likewise.
        (ia64_parse_name): New third parameter.
        (md_parse_name): Pass third argument.
        * config/tc-ia64.c (pseudo_func): Placeholders use NULL as name.
        (md_operand): Handling of '@'-prefixed symbols moved from here...
        (ia64_parse_name): ...to here.

2005-02-11  Jan Beulich  <jbeulich@novell.com>

        * config/tc-ia64.c (md): Remove last_groups and group_idx.
        (errata_nop_necessary_p): Remove declaraction and definition.
        (emit_one_bundle): Don't call errata_nop_necessary_p. Don't
        update md.group_idx. Don't reset md.last_groups.

2005-02-11  Jan Beulich  <jbeulich@novell.com>

        * config/tc-ia64.c (parse_section_name): Handle non-quoted first
        argument.
        (dot_xdata): Free section name after use.
        (dot_float_cons): Likewise.
        (dot_xstringer): Likewise.
        (dot_xdata_ua): Likewise.
        (dot_float_cons_ua): Likewise.
        (md_pseudo_table): Add xdata16 and xdata16.ua.

2005-02-10  H.J. Lu  <hongjiu.lu@intel.com>

        * doc/all.texi: Add IA64.
        * doc/as.texinfo: Likewise.

        * doc/c-ia64.texi: Fix typos.

2005-02-10  Julian Brown  <julian@codesourcery.com>

        * config/tc-arm.c (do_t_ldmstm): Change BFD_RELOC_NONE to
        BFD_RELOC_UNUSED.
        (do_t_push_pop): Likewise.
        (md_assemble): Likewise.
        (md_apply_fix3): Handle BFD_RELOC_NONE correctly, make
        BFD_RELOC_UNUSED same as previous meaning of BFD_RELOC_NONE.
        (create_unwind_entry): Output dependency on the required personality
        routines.

2005-02-07  Nathan Sidwell  <nathan@codesourcery.com>

        * as.h (seg_not_empty_p): Return int, not bfd_boolean.
        * subsegs.c (seg_not_empty_p): Likewise.

2005-02-07  Inderpreet Singh <inderpreetb@noida.hcltech.com>

        * config/tc-maxq.c (md_estimate_size_before_relax): Correct the
        relative jump calculation.
        <md_convert_frag) : Likewise.
        <output_disp): Likewise.

2005-02-07  Hans-Peter Nilsson  <hp@axis.com>

        * write.c (write_object_file): Recognize warning-symbol construct
        and skip object- and target- handling for the second symbol.

2005-02-02  Jan Beulich  <jbeulich@novell.com>

        * config/tc-ia64.c (dot_pred_rel): Update comment. Handle @-prefixed
        designators along with quoted ones. Free copy of quoted designator
        when done.

2005-02-01  Ben Elliston  <bje@au.ibm.com>

        * config/atof-ieee.c, config/obj-coff.c, config/obj-elf.c,
        config/obj-ieee.c, config/obj-som.c, config/obj-vms.c,
        config/tc-a29k.c, config/tc-alpha.c, config/tc-arc.c,
        config/tc-arm.c, config/tc-d30v.c, config/tc-dlx.c,
        config/tc-fr30.c, config/tc-h8300.c, config/tc-h8500.c,
        config/tc-i370.c, config/tc-i386.c, config/tc-i960.c,
        config/tc-ia64.c, config/tc-m32r.c, config/tc-m32r.h,
        config/tc-m68hc11.c, config/tc-m68hc11.h, config/tc-mips.c,
        config/tc-mn10200.c, config/tc-msp430.c, config/tc-ns32k.c,
        config/tc-openrisc.c, config/tc-or32.c, config/tc-pdp11.c,
        config/tc-pj.c, config/tc-sparc.h, config/tc-tic54x.c,
        config/tc-tic80.c, config/tc-v850.c, config/tc-w65.c,
        config/tc-xtensa.c, config/tc-z8k.c, config/xtensa-relax.c: Remove
        #if 0'd code throughout.

2005-01-31  Nick Clifton  <nickc@redhat.com>

        * as.c (parse_args): Bump copyright date reported by --version to
        2005.

2005-01-31  Nick Clifton  <nickc@redhat.com>

        * configure.tgt: Remove obsolete targets m68k-lynxos, sparc-lynxos
        and vax-vms.

2005-01-31  Jan Beulich  <jbeulich@novell.com>

        * macro.c (buffer_and_nest): Allow 'from' being NULL; handle anything
        that can end with .endr in that case. Make requiring/permitting
        pseudo-ops without leading dot closer to the logic in read.c serving
        the same purpose.
        (expand_irp): Don't pass a mnemonic to buffer_and_nest as it will be
        ignored.

2005-01-31  Jan Beulich  <jbeulich@novell.com>

        * macro.c (do_formals): Adjust to no longer accept empty parameter
        names.
        (define_macro): Adjust to no longer accept empty macro name, garbage
        following the parameters, or macros that were previously defined.
        * read.c (s_bad_end): Declare.
        (potable): Add endm. Handler for endr and endm is s_bad_end.
        (s_bad_end): Rename from s_bad_endr. Adjust to handle both .endm
        and .endr.
        * read.h (s_bad_endr): Remove.

2005-01-31  Jan Beulich  <jbeulich@novell.com>

        * config/tc-ia64.c (parse_operands): Parse all specified operands,
        immediately discarding (but counting) those exceeding the maximum
        possible amount. Track whether output and input operand counts ever
        matched, and use this to better indicate which of the operands/
        operand types was wrong; specifically don't default to pointing to
        the first operand.

2005-01-31  Jan Beulich  <jbeulich@novell.com>

        * config/tc-ia64.c (unwind): Remove proc_end (now an automatic
        variable in dot_endp). Add body and insn. Make prologue,
        prologue_mask, body, and insn bitfields.
        (fixup_unw_records): Remove spurious new-lines from end of diagnostic
        messages.
        (in_procedure, in_prologue, in_body): New.
        (dot_fframe, dot_vframe, dot_vframesp, dot_vframepsp, dot_save,
        dot_restore, dot_restorereg, dot_restorereg_p, dot_handlerdata,
        dot_unwentry, dot_altrp, dot_savemem, dot_saveg, dot_savef, dot_saveb,
        dot_savegf, dot_spill, dot_spillreg, dot_spillmem, dot_spillreg_p,
        dot_spillmem_p, dot_label_state, dot_copy_state, dot_unwabi,
        dot_personality): Use the appropriate one of the above.
        (dot_proc): Clear unwind.proc_start; set to current location only if
        none of the entry points were valid. Check for non-zero-length entry
        point names. Check that entry points aren't defined, yet. Clear
        unwind.prologue, unwind.body, and unwind.insn.
        (dot_body): Call in_procedure. Check that first directive in procedure
        had no insns emitted before. Set unwind.body.
        (dot_prologue): Call in_procedure. Check that not already in prologue.
        Check that first directive in procedure had no insns emitted before.
        Clear unwind.body.
        (dot_endp): Call in_procedure. Declare proc_end. Check for non-zero-
        length entry point names. Check that entry points became defined.
        (md_assemble): Set unwind.insn once unwind.proc_start is defined.

2005-01-31  Jan Beulich  <jbeulich@novell.com>

        * config/tc-ia64.c (emit_one_bundle): Snapshot manual bundling state
        before actually using it. Don't generate an error in manual bundling
        mode when looking at an insn requiring slot 2 but not yet at slot 2.
        Don't generate an error in manual bundling mode when looking at an
        insn required to be last in its group but the required slot hasn't
        been reached, yet. Allow conversion from MII to MI;I for bundle
        consisting of only 2 insns with the stop between them. Suppress
        various meaningless errors resulting from detecting earlier ones.

2005-01-31  Jan Beulich  <jbeulich@novell.com>

        * config/tc-ia64.c (parse_operands): Also handle alloc without first
        input being ar.pfs.

2005-01-28  Christian Groessler  <chris@groessler.org>

        * config/tc-z8k.c (md_assemble): Improve error detection.

2005-01-28  Jan Beulich  <jbeulich@novell.com>

        * config/tc-ia64.c (ia64_estimate_size_before_relax): Allocate space
        for personality routine pointer only if there is one.
        (ia64_convert_frag): Likewise.
        (generate_unwind_image): Likewise.

2005-01-27  Christian Groessler  <chris@groessler.org>

        * config/tc-z8k.c (INSERT): Remove, not used anywhere.
        (md_apply_fix3): Make relative branches out of range an error
        instead of a warning.  Display correct line number for out of
        range branches/calls/memory accesses.

2005-01-27  Nathan Sidwell  <nathan@codesourcery.com>

        * dwarf2dbg.c (dwarf2_finish): Correct logic for determining when
        to emit .debug_line and other debug sections.
        * as.h (seg_not_empty_p): Declare.
        * subsegs.c (seg_not_empty_p): New predicate.

2005-01-27  Andrew Cagney  <cagney@gnu.org>

        * configure: Regenerate to track ../gettext.m4 change.

2005-01-27  Jan Beulich  <jbeulich@novell.com>

        * config/tc-ia64.c (emit_one_bundle): Change "?imbf??" to "?ibmfxx".

2005-01-27  Jan Beulich  <jbeulich@novell.com>

        * config/tc-ia64.c (emit_one_bundle): Add late resolution of move
        to/from application registers dynamic insns.
        (md_assemble): Defer resolution of move to/from application registers
        dynamic insns when they can be issued on either the I- or M-units.

2005-01-25  Alexandre Oliva  <aoliva@redhat.com>

        * config/tc-frv.c (md_apply_fix3): Mark TLS symbols as such.
        2004-12-10  Alexandre Oliva  <aoliva@redhat.com>
        * config/tc-frv.c (frv_pic_ptr): Add tlsmoff support.
        2004-11-10  Alexandre Oliva  <aoliva@redhat.com>
        * cgen.c (gas_cgen_parse_operand): Handle
        CGEN_PARSE_OPERAND_SYMBOLIC.
        * config/tc-frv.c (md_cgen_lookup_reloc): Handle TLS relocations.
        (frv_force_relocation): Likewise.  Fix handling of PIC
        relocations.
        (md_apply_fix3): Likewise.

2005-01-21  Ben Elliston  <bje@au.ibm.com>

        * as.h: Remove #if 0'd code.
        * atof-generic.c (atof_generic): Likewise.
        * ecoff.c (ecoff_directive_frame): Likewise.
        * frags.h (FRAG_APPEND_1_CHAR): Likewise.
        * itbl-ops.c (itbl_add_reg): Likewise.
        * listing.c (calc_hex): Likewise.
        * read.c (MASK_CHAR): Likewise.
        * subsegs.c (subsegs_print_statistics): Likewise.
        * symbols.c (indent): Likewise.
        * write.c (write_relocs): Likewise.
        (write_object_file): Likewise.
        (relax_frag): Likewise.

2005-01-20  Nick Clifton  <nickc@redhat.com>

        * as.c (std_longopts): Add an entry for "--a" in order to prevent
        getopt_long_only() from considering -a as an abbreviation for
        --alternate.
        (parse_args): Fix the parsing of -a=<file>.

2005-01-20  Alan Modra  <amodra@bigpond.net.au>

        PR gas/684
        * read.c (s_incbin): Adjust default count for skip.  Check validity
        of count and skip rigorously.

2005-01-19  Fred Fish  <fnf@specifixinc.com>

        * config/tc-mips.c (dummy_opcode): Add init for new struct member.

2005-01-19  Richard Sandiford  <rsandifo@redhat.com>

        * read.c (convert_to_bignum): New function, split out from...
        (emit_expr): ...here.  Handle the case where X_add_number is
        positive and the input value is negative.
        (output_big_sleb128): Fix setting of continuation bit.  Check whether
        the final byte needs to be sign-extended.  Fix size-shrinking loop.
        (emit_leb128_expr): When generating a signed leb128, see whether the
        sign of an O_constant's X_add_number matches the sign of the input
        value.  Use a bignum if not.

2005-01-17  Andrew Stubbs  <andrew.stubbs@st.com>

        * tc-sh.c (md_begin,md_parse_option): Change arch_sh1_up to
        arch_sh_up in order to match the external name and make the
        testsuite's job easier.

2005-01-14  H.J. Lu  <hongjiu.lu@intel.com>

        PR 659
        * config/tc-i386.c (i386_scale): Disallow 0 scale.

2005-01-12  Nick Clifton  <nickc@redhat.com>

        * config/tc-iq2000.c (s_iq2000_set): Fix thinko parsing
        ignored_arguments array.

2005-01-10  H.J. Lu  <hongjiu.lu@intel.com>

        * write.c (write_object_file): Disallow a symbol equated to
        common symbol.

2005-01-10  Inderpreet Singh <inderpreetb@noida.hcltech.com>

        * tc-maxq.c: Replace constants 10 and 20 with bfd_mach_maxq10 and
        bfd_mach_maxq20.
        (md_pseudo_table): Add new pseudo ops for maxq10 and maxq20.
        (maxq_target): New function: Set the machine type.

2005-01-06  Paul Brook  <paul@codesourcery.com>

        * config/tc-arm.c (FPU_DEFAULT): Define for TE_VXWORKS.
        (md_begin): Handle TE_VXWORKS for FP defaults.
        (md_apply_fix3): Correct rela offsets.
        (elf32_arm_target_format): Add VxWorks targets.

2005-01-06  Paul Brook  <paul@codesourcery.com>

        * configure.tgt: Set em=vxworks for *-*-vxworks.
        * config/te-vxworks.h: New File.

2005-01-06  Paul Brook  <paul@codesourcery.com>

        * config/tc-arm.c (arm_cpus): Correct arch field for arm1026ej-s.

2005-01-04  Dmitry Diky  <diwil@spec.ru>

        * config/tc-msp430.c (md_apply_fix3): Fix offset calculation for
        global label.

2005-01-03  David Mosberger  <davidm@hpl.hp.com>

        * config/tc-ia64.c (md): Add member "loc_directive_seen".
        (dot_loc): New function.
        (md_pseudo_table): Add entry to map .loc to dot_loc().
        (emit_one_bundle): Only call dwarf2_gen_line_info() if we have
        seen a .loc directive or we're generating DWARF2 debug info for
        assembly source.

2004-12-29  Alan Modra  <amodra@bigpond.net.au>

        PR gas/619
        * read.c (s_comm_internal): Don't zero end of name until size
        expression has been parsed.

2004-12-25  Marek Michalkiewicz  <marekm@amelek.gda.pl>

        * config/tc-avr.c (mcu_types): Move attiny{13,2313} from avr4 to avr2.

2004-12-23  Tomer Levi  <Tomer.Levi@nsc.com>

        * config/tc-crx.c: Support 'bcop' relaxation (dealt as in 'cmp&branch'
        case).

2004-12-22  Ian Lance Taylor  <ian@airs.com>

        * configure.tgt: New.
        * configure.in: Move setting of cpu_type, fmt, etc., to
        configure.tgt.
        * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add
        $(srcdir)/configure.tgt.
        * configure, Makefile.in: Rebuild.

2004-12-22  Klaus Rudolph  <lts-rudolph@gmx.de>

        * config/tc-avr.c: Add support for the new R_AVR_LDI, R_AVR_6 and
        R_AVR_6_ADIW relocs for the LDI, ADIW/SBIW and LDD/STD
        instructions.
        (avr_offset_expression): New function to parse offsets for LDI
        instructions.
        (avr_operand): Use it.
        (md_apply_fix3): Generate the relocs.

2004-12-16  Andrew Stubbs  <andrew.stubbs@st.com>

        * config/tc-sh64.c (shmedia_md_apply_fix3): Add missing
        BFD_RELOC_SH_IMMS10BY8 relocation.

        * config/tc-sh64.c (shmedia_build_Mytes): Emit an error message rather
        than just ignoring bad code.

2004-12-16  Richard Sandiford  <rsandifo@redhat.com>

        * config/tc-v850.c (handle_lo16): New function.
        (v850_reloc_prefix): Use it to check lo().
        (md_assemble, md_apply_fix3): Handle BFD_RELOC_V850_LO16_SPLIT_OFFSET.

2004-12-14  P.J. Darcy  <darcypj@us.ibm.com>

        * configure.in: Add s390x-ibm-tpf support.
        * configure: Regenerate.

2004-12-15 Jan Beulich  <jbeulich@novell.com>

        * config/obj-elf.c (obj_elf_change_section): Only set type and
        attributes on new sections. Emit warning when type of re-declared
        section doesn't match.

2004-12-15 Jan Beulich  <jbeulich@novell.com>

        * dw2gencfi.c (dot.cfi.startproc): Clear cur_cfa_offset so
        '.cfi_startproc simple' doesn't inherit the old value.

2004-12-15  Jan Beulich  <jbeulich@novell.com>

        * dw2gencfi.c (output_cfi_insn): Adjust DW_CFA_def_cfa_sf generation
        to emit a signed and factored offset. Adjust DW_CFA_def_cfa_offset_sf
        generation to emit a factored offset.

2004-12-10  Ian Lance Taylor  <ian@wasabisystems.com>

        * config/tc-mips.c (macro) [M_LA_AB]: Give an error for a offset
        which is too large in the case of NO_PIC without 64-bit
        addresses.

        * config/tc-mips.c (mips_in_shared): New static variable.
        (macro_build_lui): Permit "_gp" if !mips_in_shared.
        (md_longopts): Add -mshared and -mno-shared.
        (md_parse_option): Handle OPTION_MSHARED and OPTION_MNO_SHARED.
        (s_cpload): Implement !mips_in_shared case.
        (s_cpsetup): Likewise.
        * doc/c-mips.texi (MIPS Opts): Document -mno-shared.
        * NEWS: Mention -mno-shared.

2004-12-09  Paul Brook  <paul@codesourcery.com>

        * config/tc-arm.c (s_arm_unwind_fnend): Use R_ARM_PREL31 relocation
        for function start.

2004-12-09  Ian Lance Taylor  <ian@wasabisystems.com>

        * config/tc-mips.c (append_insn): If we emit a nop during a relax
        sequence, increase the size of the sequence.

        * config/tc-mips.c (mips_cpu_info_table): Change "9000" entry to
        use CPU_RM9000.

2004-12-07  Ben Elliston  <bje@gnu.org>

        * read.c (s_align): Use an align_limit temporary to allay a GCC
        signed/unsigned comparison warning.

2004-12-01  Mark Mitchell  <mark@codesourcery.com>

        * Makefile.am (TARG_ENV_HFILES): Add te-armlinuxeabi.h.
        * configure.in: Use it for arm*-*-linux-gnueabi*.
        * config/tc-arm.c: Allow emulation file to set FPU_DEFAULT.
        * config/te-armlinuxeabi.h: New file.
        * Makefile.in: Regenerated.
        * aclocal.m4: Likewise.
        * configure: Likewise.
        * doc/Makefile.in: Regenerated.

2004-12-02  Bob Wilson  <bob.wilson@acm.org>

        * config/tc-xtensa.c (xtensa_switch_section_emit_state): Use subseg_set.
        (xtensa_restore_emit_state): Likewise.

2004-12-02  Alan Modra  <amodra@bigpond.net.au>

        * read.c (ALIGN_LIMIT): Define, increasing limit for BFD_ASSEMBLER.
        (s_align): Use it.

2004-11-30  Tero Niemela  <tero_niemela@yahoo.com>

        * Makefile.am: Change LOCALEDIR to $(datadir)/share.
        * Makefile.in: Regenerate.

2004-11-29  Tomer Levi  <Tomer.Levi@nsc.com>

        * config/tc-crx.c: Major code cleanup. Remove unused variables and
        functions, give functions a meaningful name, add comments.
        (check_range): New function - Replace operand size calculation
        with range checking.
        (assemble_insn): Update Algorithm, improve error issuing.
        (enum op_err): New.
        (process_label_constant): Bug fix regarding COP_BRANCH_INS relocation
        handling.

2004-11-29  Kazuhiro Inaoka <inaoka.kazuhiro@renesas.com>

        * config/tc-m32r.c (md_pcrel_from_section): Fixed a pcrel relocte
        miss between different section in the same module.
        (tc_gen_reloc): Likewise.

2004-11-25  Theodore A. Roth  <troth@openavr.org>

        * gas/config/tc-avr.c (mcu_types): Add support for atmega165,
        atmega325, atmega3250, atmega645 and atmega6450.

2004-11-25 Jan Beulich  <jbeulich@novell.com>

        * config/tc-i386.c (optimize_imm): Adjust immediates to only those
        permissible for the selected instruction suffix.
        (process_suffix): For DefaultSize instructions, suppressing the
        guessing of a 'q' suffix if the instruction doesn't support it is
        pointless, because only an 'l' suffix can be guessed in this place.

2004-11-24  Nick Clifton  <nickc@redhat.com>

        * config/tc-iq2000.c: Remove support for IQ10 processor.
        Convert to ISO C90 formatting.
        * config/tc-iq2000.h: Likewise.

2004-11-23  Nick Clifton  <nickc@redhat.com>

        * config/tc-mn10300.c (md_relax_table): More fixes to the offsets
        in this table.  They should be correct now.

2004-11-23 Jan Beulich <jbeulich@novell.com>

        * config/tc-i386.h (CpuMMX2): Declare. Artificial classifier to
        indicate the MMX extensions added by both SSE and 3DNow!A.
        (Cpu3dnowA): Declare.
        (CpuUnknownFlags): Update.
        * config/tc-i386.c (cpu_sub_arch_name): Declare.
        (cpu_arch): i586 and pentium do not imply MMX. i686 and pentiumpro do
        neither imply SSE nor MMX. k6 implies MMX. k6_2 additionally implies
        3DNow!. Athlon additionally implies 3DNow!A. Several new
        entries (those starting with a dot are for sub-arch specification).
        (set_cpu_arch): Handle sub-arch specifications.
        (parse_insn): Distinguish between instructions not supported because
        of insufficient CPU features and because of 64-bit mode.
        * doc/c-i386.texi: Describe enhanced .arch directive.

2004-11-22  Bob Wilson  <bob.wilson@acm.org>

        * config/tc-xtensa.c (xg_add_opcode_fix): Set fx_no_overflow.

2004-11-22  Bob Wilson  <bob.wilson@acm.org>

        * dwarf2dbg.c (dwarf2_finish): Don't write a .debug_line section
        without a corresponding .debug_info section.

2004-11-22  Hans-Peter Nilsson  <hp@axis.com>

        * read.c (potable): Add "error" and "warning".
        (s_errwarn): New function.
        * read.h (s_errwarn): Declare.
        * doc/as.texinfo (Error, Warning): Document .error and .warning.

2004-11-22  Nick Clifton  <nickc@redhat.com>

        * config/tc-tic54x.c (tic54x_adjust_symtab): Adjust call to
        c_dot_file_symbol.

2004-11-19  Alan Modra  <amodra@bigpond.net.au>

        * config/tc-msp430.c (struct rcodes_s, MSP430_RLC, msp430_rcodes,
        struct hcodes_s, msp430_hcodes): From include/opcode/msp430.h.

2004-11-19  Alan Modra  <amodra@bigpond.net.au>

        * config/obj-coff.c (c_dot_file_symbol): Add "app" param.
        (coff_adjust_symtab): Adjust call.
        (crawl_symbols): Likewise.
        * config/obj-coff.h (c_dot_file_symbol): Add "app" param.
        (obj_app_file): Adjust.

2004-11-18  Inderpreet Singh   <inderpreetb@nioda.hcltech.com>

        * configure.in: Enable bfd_assember for the MAXQ port.
        * configure: Regenerate.

2004-11-12  Bob Wilson  <bob.wilson@acm.org>
            Sterling Augustine  <sterling@tensilica.com>

        * config/tc-xtensa.c (finish_vinsn): Clear pending instruction if
        there is a conflict.
        (check_t1_t2_reads_and_writes): Check for both reads and writes to
        interfaces that are related as determined by xtensa_interface_class_id.

2004-11-12  Nick Clifton  <nickc@redhat.com>

        * config/tc-mn10300.c (md_relax_table): Fix off by one negative
        offsets for conditional branches.

2004-11-11  Bob Wilson  <bob.wilson@acm.org>

        * config/tc-xtensa.c (MAX_IMMED6): Change value to 65.

2004-11-10  Bob Wilson  <bob.wilson@acm.org>

        * config/tc-xtensa.c (update_next_frag_state): Always add a NOP if
        relaxing at the end of a loop.  Don't mark frags as UNREACHABLE or
        MAYBE_UNREACHABLE.
        (relax_frag_immed): Update call to update_next_frag_state.

2004-11-10  Alan Modra  <amodra@bigpond.net.au>

        * obj.h (struct format_ops <app_file>): Add int param.
        * read.h (s_app_file_string): Likewise.
        * read.c (s_app_file_string): Likewise.
        (s_app_file): Adjust s_app_file_string call.
        * config/tc-mips.c (s_mips_file): Likewise.
        * config/obj-coff.h (obj_app_file): Add app param.
        * config/obj-ecoff.h (obj_app_file): Likewise.
        * config/obj-multi.h (obj_app_file): Likewise.
        * config/obj-elf.h (elf_file_symbol): Likewise.
        * config/obj-elf.c (elf_file_symbol): Only emit one file symbol
        if called for # preprocessor lines.

2004-11-08  H.J. Lu  <hongjiu.lu@intel.com>

        PR 528
        * symbols.c (resolve_symbol_value): Convert weak symbols only
        for Windows PECOFF.
        (symbol_equated_reloc_p): Don't equate weaks when relocating
        only for Windows PECOFF.

2004-11-08  Tomer Levi  <Tomer.Levi@nsc.com>

        * config/tc-crx.c (print_insn): Check and set insn_addr.
        * config/tc-crx.h (md_frag_check): Define.

2004-11-08  Inderpreet Singh   <inderpreetb@nioda.hcltech.com>
            Vineet Sharma      <vineets@noida.hcltech.com>

        * configure.in: Add support for new target maxq-coff.
        * configure: Regenerate.
        * NEWS: Mention new support.
        * config/tc-maxq.c: New file.
        * config/tc-maxq.h: New file.
        * config/obj-coff.h: Add support for maxq-coff.

2004-11-08  Aaron W. LaFramboise <aaron98wiridge9@aaronwl.com>

        * symbols.c (any_external_name): Define.
        (resolve_symbol_value): Convert weak symbols.
        (S_SET_EXTERNAL): Support any_external_name.
        (S_SET_NAME): Qualify parameter const.
        (symbol_equated_reloc_p): Equate to weaks when relocating.
        * symbols.h (S_SET_NAME): Qualfiy parameter const.
        * tc.h (any_external_name): Declare.
        * config/obj-coff.c ("coff/pe.h"): Include for BFD
        assemblers also.
        (weak_is_altname): Declare and define.
        (weak_name2altname): Same.
        (weak_altname2name): Same.
        (weak_uniquify): Same.
        (weak_altprefix): Define.
        (obj_coff_weak): Change .weak syntax and handling.
        (coff_frob_symbol): Fix PE weak symbol alternates.
        * config/obj-coff.h (USE_UNIQUE): Define.
        * config/tc-i386.c (md_apply_fix3): Assume weak symbols
        are in another segment.
        (tc_gen_reloc): Remove broken addend hack.
        doc/as.texinfo: Update.

2004-11-05  Sterling Augustine  <sterling@tensilica.com>

        * config/tc-xtensa.c (total_frag_text_expansion): New.
        (md_estimate_size_before_relax): Use it.
        (find_address_of_next_align_frag): Likewise.

2004-11-05  Tomer Levi  <Tomer.Levi@nsc.com>

        * config/tc-crx.c: Rename argument types.
        (processing_arg_number): Rename to 'cur_arg_num'.
        (get_number_of_bits): Rename to 'set_operand_size'.
        (get_operandtype): Rename to 'parse_operand', totally rewrite.
        (set_cons_rparams): Rename to 'set_operand', totally rewrite.
        (set_indexmode_parameters): Remove function, integrate its code into
        'set_operand'.
        (set_operand_size): Get rid of 'Operand Number' function parameter -
        use global variable 'cur_arg_num' instead.
        Use a local 'argument' pointer to reference the current argument.
        (parse_operand): Likewise.
        (set_operand): Likewise.
        (process_label_constant): Likewise.

2004-11-04  Bob Wilson  <bob.wilson@acm.org>

        * config/tc-xtensa.c: Remove XTENSA_SECTION_RENAME ifdefs.
        (add_section_rename): Delete.  Inlined into...
        (build_section_rename): ...here.  Use xstrdup instead of strdup.
        (xtensa_section_rename): Drop "const" from argument and return types.
        (md_show_usage): Indent to match show_usage().
        * config/tc-xtensa.h: Remove XTENSA_SECTION_RENAME ifdefs.
        (tc_canonicalize_section_name): Define.
        (md_elf_section_rename): Remove unused macro.
        * doc/as.texinfo (Overview): Document Xtensa --rename-section option.
        * doc/c-xtensa.texi (Xtensa Options): Likewise.
        (Frame Directive): Delete.

2004-11-04  Daniel Jacobowitz  <dan@debian.org>

        * configure.in: Remove arm-*-oabi and thumb-*-oabi.
        * config/tc-arm.c (target_oabi): Delete.
        (md_apply_fix3, elf32_arm_target_format): Remove target_oabi checks.
        (arm_opts): Remove moabi.
        * doc/as.texinfo (Overview): Remove documentation of -moabi.
        * doc/c-arm.texi (ARM Options): Likewise.
        * configure: Regenerated.

2004-11-04  Hans-Peter Nilsson  <hp@axis.com>

        * configure.in (crisv32): Recognize.  AC_DEFINE_UNQUOTED
        DEFAULT_CRIS_ARCH.  Handle crisv32-*-linux-gnu* like
        cris-*-linux-gnu* and crisv32-*-* like cris-*-*.
        * configure: Regenerate.
        * config/tc-cris.c (enum cris_archs): New.
        (cris_mach, cris_arch_from_string, s_cris_arch, get_sup_reg)
        (cris_insn_ver_valid_for_arch): New functions.
        (DEFAULT_CRIS_ARCH): New macro, default to cris_any_v0_v10.
        (cris_arch): New variable.
        (md_pseudo_table): New pseudo .arch.
        (err_for_dangerous_mul_placement): Initialize according to
        DEFAULT_CRIS_ARCH.
        (STATE_COND_BRANCH): Renamed from STATE_CONDITIONAL_BRANCH.
        All users changed.
        (STATE_COND_BRANCH_V32, STATE_COND_BRANCH_COMMON)
        (STATE_ABS_BRANCH_V32, STATE_LAPC, BRANCH_BF_V32, BRANCH_BB_V32)
        (BRANCH_WF_V32, BRANCH_WB_V32): New.
        (BRANCH_BF, BRANCH_BB, BRANCH_WF, BRANCH_WB): Don't undef after
        use in md_cris_relax_table.
        (md_cris_relax_table): Add entries for STATE_COND_BRANCH_V32,
        STATE_COND_BRANCH_COMMON, STATE_ABS_BRANCH_V32, STATE_LAPC.
        Update and improve head comment.
        (OPTION_PIC): Define in terms of previous option, OPTION_US.
        (OPTION_MULBUG_ABORT_ON, OPTION_MULBUG_ABORT_OFF): Similar.
        (OPTION_ARCH): New.
        (md_longopts): New option --march=...
        (cris_any_v0_v10_long_jump_size, crisv32_long_jump_size): New
        macros.
        (md_long_jump_size): Initialize in terms of DEFAULT_CRIS_ARCH.
        (HANDLE_RELAXABLE): New macro.
        (md_estimate_size_before_relax): Use HANDLE_RELAXABLE for common
        cases.  Check for weak symbols and assume not relaxable.  Handle
        STATE_COND_BRANCH_V32, STATE_COND_BRANCH_COMMON,
        STATE_ABS_BRANCH_V32, STATE_LAPC.  Use new variable symbolP, not
        fragP->fr_symbol.
        (md_convert_frag): Handle STATE_COND_BRANCH_V32,
        STATE_COND_BRANCH_COMMON, STATE_ABS_BRANCH_V32, STATE_LAPC.
        (cris_create_short_jump): Adjust for CRISv32.
        (cris_relax_frag): Handle new states.
        (md_create_long_jump): Ditto.  Emit error for common_v10_v32.
        (md_begin): Define symbols "..asm.arch.cris.v32",
        "..asm.arch.cris.v10", "..asm.arch.cris.common_v10_v32" and
        "..asm.arch.cris.any_v0_v10".  Use cris_insn_ver_valid_for_arch
        when entering opcode table entry points.
        (md_assemble): Adjust branch handling for CRISv32.  Handle LAPC
        relaxation.  In fix_new_exp call for main insn, pass 1 for pcrel
        parameter for 8, 16 and 32-bit pc-relative insns and LAPC.
        (cris_process_instruction): Initialize out_insnp->insn_type to
        CRIS_INSN_NONE, not CRIS_INSN_NORMAL.
        <case ']', '[', 'A', 'd', 'Q', 'N', 'n', 'Y', 'U', 'u', 'T'>: New
        cases.
        <case 'm'>: Check that modified_char == '.'.
        <invalid operands>: Consume the rest of the line.
        When operands don't match, skip over subsequent insns with
        non-matching version specifier but same mnemonic.
        <immediate constant, case SIZE_SPEC_REG>: Immediate operands for
        special registers in CRISv32 are always 32 bit long.
        <immediate constant, case SIZE_FIELD_SIGNED, SIZE_FIELD_UNSIGNED>:
        New cases.
        (get_gen_reg): Only recognize "PC" when followed by "+]" for v32
        and compatible.  Recognize "ACR" for v32, unless followed by "+".
        (get_spec_reg): Consider cris_arch when looking up register.
        (get_autoinc_prefix_or_indir_op): Don't recognize assignment for
        v32 or compatible.
        (get_3op_or_dip_prefix_op): Check for ']' after seeing '[rN+'.
        (cris_get_expression): Restore input_line_pointer if failing "early".
        (get_flags): Consider cris_arch and recognize flags accordingly.
        (branch_disp): Adjust for CRISv32.
        (gen_cond_branch_32): Similar.  Emit error for common_v10_v32.
        (cris_number_to_imm): Use as_bad_where, not as_bad.  Remove
        related FIXME.  Don't insist on BFD_RELOC_32_PCREL fixup to be
        resolved.  Don't enter zeros in object file for
        BFD_RELOC_32_PCREL.
        <case BFD_RELOC_CRIS_LAPCQ_OFFSET, BFD_RELOC_CRIS_SIGNED_16>
        <case BFD_RELOC_CRIS_SIGNED_8>: New case.
        (md_parse_option): Break out "return 1".
        <OPTION_ARCH> New case.
        (tc_gen_reloc): <case BFD_RELOC_CRIS_LAPCQ_OFFSET>
        <case BFD_RELOC_CRIS_SIGNED_16, BFD_RELOC_CRIS_SIGNED_8>
        <case BFD_RELOC_CRIS_UNSIGNED_8, BFD_RELOC_CRIS_UNSIGNED_16>
        <case BFD_RELOC_32_PCREL>: New cases.
        Addends for non-zero fx_pcrel are too in fx_offset.
        (md_show_usage): Show --march=<arch>.
        (md_apply_fix3): Adjust val for BFD_RELOC_CRIS_LAPCQ_OFFSET.
        (md_pcrel_from): BFD_RELOC_CRIS_LAPCQ_OFFSET is PC-relative too.
        (s_syntax) <struct syntaxes>: Properly constify member operand.
        * config/tc-cris.h (TARGET_MACH): Define.
        (cris_mach): Declare.
        * doc/as.texinfo (Overview) <CRIS>: Add --march=...
        * doc/c-cris.texi (CRIS-Symbols): New node for built-in symbols.
        (CRIS-Opts): Document --march=...
        (CRIS-Pseudos): Document .arch.

2004-11-04 Jan Beulich <jbeulich@novell.com>

        * config/tc-i386.c (set_intel_syntax): Allow % in symbol names when
        intel syntax and no register prefix, allow $ in symbol names when
        intel syntax.
        (set_16bit_gcc_code_flag): Replace literal 'l' by LONG_MNEM_SUFFIX.
        (intel_float_operand): Add fourth return value indicating math control
        operations. Make classification more precise.
        (md_assemble): Complain if memory operand of mov[sz]x has no size
        specified.
        (parse_insn): Translate word operands to floating point instructions
        operating on integers as well as control instructions to short ones
        as expected by AT&T syntax. Translate 'd' suffix to short one only for
        floating point instructions operating on non-integer operands.
        (match_template): Remove fldcw special case. Adjust q-suffix handling
        to permit it on fild/fistp/fisttp in AT&T mode.
        (process_suffix): Don't guess DefaultSize insns' suffix from
        stackop_size for certain floating point control instructions. Guess
        suffix for branch and [ls][gi]dt based on flag_code. Split error
        messages for Intel and AT&T syntax, and make the condition more strict
        for the former. Adjust suppressing of generation of operand size
        overrides.
        (intel parser): Allow the full set of MASM operators. Add FWORD, TBYTE,
        OWORD, and XMMWORD operand size specifiers (TBYTE replaces XWORD). Add
        more error checking.
        * config/tc-i386.h (BYTE_PTR WORD_PTR DWORD_PTR QWORD_PTR XWORD_PTR
        SHORT OFFSET_FLAT FLAT NONE_FOUND): Remove unused defines.

2004-11-03  Hans-Peter Nilsson  <hp@axis.com>

        * symbols.c (colon) [!WORKING_DOT_WORD]: Don't declare
        md_short_jump_size, md_long_jump_size.
        * write.c [!WORKING_DOT_WORD]: Ditto.
        * tc.h [!WORKING_DOT_WORD]: Declare them here.  Drop const
        qualifier.
        * config/tc-cris.h (md_short_jump_size, md_long_jump_size): Don't
        declare.
        * config/tc-cris.c (md_short_jump_size, md_long_jump_size): Drop
        const qualifier in these definitions.
        * config/tc-i370.c, config/tc-m68k.c, config/tc-pdp11.c,
        config/tc-s390.c, config/tc-tahoe.c, config/tc-vax.c: Ditto.

2004-11-02  Nick Clifton  <nickc@redhat.com>

        * dwarf2dbg.c (dwarf2_finish): Check for the existence of a file
        table before deciding to produce a .debug_line section to match up
        with a user provided .debug_info section.

2004-10-28  Tomer Levi  <Tomer.Levi@nsc.com>

        * config/tc-crx.c (getreg_image): Bug fix, a return value was
        mistakenly omitted from CRX_C_REGTYPE and CRX_CS_REGTYPE cases.

2004-10-27  Tomer Levi  <Tomer.Levi@nsc.com>

        * config/tc-crx.c: Remove global variable 'post_inc_mode'.
        (get_flags): New function.
        (get_number_of_bits): Edit comments, update numeric values to
        supported sizes.
        (process_label_constant): Don't support the colon
        format (SYMBOL:[s|m|l]).
        (set_cons_rparams): Support argument type 'arg_rbase'.
        (get_operandtype): Bug fix in 'rbase' operand type parsing.
        (handle_LoadStor): Bug fix, first handle post-increment mode.
        (getreg_image): Remove redundant code, update according to latest
        CRX spec.
        (print_constant): Bug fix relate to 3-word instructions.
        (assemble_insn): Bug fix, when matching instructions, verify also
        instruction type (not only mnemonic).
        Add various error checking.
        (preprocess_reglist): Support HI/LO and user registers.

2004-10-25  David Mosberger-Tang  <davidm@hpl.hp.com>

        * config/tc-ia64.c (fixup_unw_records): Don't let the "t" value
        in an epilogue directive go negative.

2004-10-25  H.J. Lu  <hongjiu.lu@intel.com>

        PR 474
        * config/tc-ia64.c (emit_one_bundle): Decrement md.num_slots_in_use
        after reporting template error during manual bundling. Reported
        by Michael Dupont, michaelx.dupont@intel.com.

2004-10-25  Daniel Jacobowitz  <dan@debian.org>

        * Makefile.am: Run dep-am.
        * aclocal.m4: Regenerate with automake 1.9.2.
        * Makefile.in: Regenerate with automake 1.9.2.
        * doc/Makefile.in: Likewise.

        * config/tc-arm.c: Include "dw2gencfi.h".
        (tc_arm_regname_to_dw2regnum, tc_arm_frame_initial_instructions):
        New functions.
        * config/tc-arm.h (TARGET_USE_CFIPOP, DWARF2_DEFAULT_RETURN_COLUMN)
        (DWARF2_CIE_DATA_ALIGNMENT, tc_regname_to_dw2regnum)
        (tc_cfi_frame_initial_instructions): Define.
        (tc_arm_regname_to_dw2regnum, tc_arm_frame_initial_instructions):
        Add prototypes.

2004-10-21  Tomer Levi  <Tomer.Levi@nsc.com>

        * config/tc-crx.c (assemble_insn): Check unsigned immediate
        operands validity.
        Update coprocessor id to be unsigned immediate.

2004-10-18  Aaron W. LaFramboise <aaron98wiridge9@aaronwl.com>

        * config/tc-i386.c (O_secrel): Delete.
        (tc_pe_dwarf2_emit_offset): New function.
        * config/tc-i386.h (O_secrel): Define as O_md1.
        (TC_DWARF2_EMIT_OFFSET): Define.

2004-10-18  Nick Clifton  <nickc@redhat.com>

        * config/tc-xstormy16.c (xstormy16_cons_fix_new): Accept and
        ignore @fptr() directives for 4-byte fixups.

2004-10-15  Alan Modra  <amodra@bigpond.net.au>

        * Makefile.am: Run "make dep-am"
        * Makefile.in: Regenerate.

2004-10-14  Bob Wilson  <bob.wilson@acm.org>

        * doc/c-xtensa.texi (Xtensa Options, Absolute Literals Directive):
        Remove comments about placement of literal pools.
        (Literal Directive): Update description of literal placement.
        (Literal Prefix Directive): Remove statement that this does not apply
        to absolute-mode literals.  Describe new section naming scheme.

2004-10-12  Bob Wilson  <bob.wilson@acm.org>

        * config/tc-xtensa.c (xtensa_frequency_pseudo): Use set_subseg_freq.
        (is_entry_opcode, is_movi_opcode, is_the_loop_opcode, is_jx_opcode,
        is_windowed_return_opcode): Delete.
        (xtensa_frob_label): Use get_subseg_target_freq.
        (md_assemble): Inline call to is_entry_opcode.
        (xtensa_handle_align): Inline call to get_frag_is_literal.
        (relaxation_requirements): Inline call to is_jx_opcode.
        (emit_single_op): Inline call to is_movi_opcode.
        (xg_assemble_vliw_tokens): Inline calls to get_frag_is_insn,
        get_frag_is_no_transform, is_entry_opcode, and
        set_frag_is_specific_opcode.  Use get_subseg_total_freq.
        (xtensa_fix_a0_b_retw_frags, xtensa_fix_b_j_loop_end_frags,
        xtensa_fix_close_loop_end_frags, relax_frag_immed, convert_frag_immed):
        Inline calls to get_frag_is_no_transform.
        (next_instrs_are_b_retw): Inline call to is_windowed_return_opcode.
        (xtensa_fix_short_loop_frags): Inline calls to is_the_loop_opcode and
        get_frag_is_no_transform.
        (convert_frag_immed_finish_loop): Inline calls to get_expression_value
        and set_frag_is_no_transform.
        (get_expression_value): Delete.
        (subseg_map struct): Rename cur_total_freq to total_freq.  Rename
        cur_target_freq to target_freq.
        (get_subseg_info): Split out code to create a new map entry into ...
        (add_subseg_info): ... this new function.
        (get_last_insn_flags): Check if get_subseg_info succeeded.
        (set_last_insn_flags): Call add_subseg_info if needed.
        (get_subseg_total_freq, get_subseg_target_freq, set_subseg_freq): New.
        (xtensa_reorder_segments): Compute last_sec while counting sections.
        Remove call to get_last_sec.
        (get_last_sec): Delete.
        (cache_literal_section): Inline call to retrieve_literal_seg and its
        callees, seg_present and add_seg_list.
        (retrieve_literal_seg, seg_present, add_seg_list): Delete.
        (get_frag_is_insn, get_frag_is_no_transform,
        set_frag_is_specific_opcode, set_frag_is_no_transform): Delete.
        * config/tc-xtensa.h (MAX_SLOTS): Reduce from 31 to 15.

2004-10-12  Bob Wilson  <bob.wilson@acm.org>

        * config/tc-xtensa.c: Use ISO C90 formatting.
        * config/tc-xtensa.h: Likewise.
        * config/xtensa-istack.h: Likewise.
        * config/xtensa-relax.c: Likewise.
        * config/xtensa-relax.h: Likewise.

2004-10-12  Paul Brook  <paul@codesourcery.com>

        * config/tc-arm.c (md_begin): Change EF_ARM_EABI_VER3 to
        EF_ARM_EABI_VER4.
        (arm_eabis): Ditto.
        * doc/c-arm.texi: Document that we actually support -meabi=4, not
        -meabi=3.

2004-10-08  Bob Wilson  <bob.wilson@acm.org>

        * doc/as.texinfo (VTableEntry, VTableInherit): Add "directive" to index
        entries.
        (Acknowledgements): Use "GAS" instead of AS variable.

2004-10-08  Daniel Jacobowitz  <dan@debian.org>

        * config/tc-i386.c: Include "elf/x86-64.h".
        (i386_elf_section_type): New function.
        * config/tc-i386.h (md_elf_section_type): Define.
        (i386_elf_section_type): New prototype.

2004-10-08  Linus Nielsen Feltzing  <linus@haxx.se>

        * config/m68k-parse.h (enum m68k_register): New control register,
        MBAR2 (for MCF5249)
        * config/tc-m68k.c: Correct control register set for MCF5249.

2004-10-07  Bob Wilson  <bob.wilson@acm.org>
            Sterling Augustine  <sterling@tensilica.com>

        * config/tc-xtensa.c (absolute_literals_supported): New global flag.
        (UNREACHABLE_MAX_WIDTH): Define.
        (XTENSA_FETCH_WIDTH): Delete.
        (cur_vinsn, xtensa_fetch_width, xt_saved_debug_type, past_xtensa_end,
        prefer_const16, prefer_l32r): New global variables.
        (LIT4_SECTION_NAME): Define.
        (lit4_state struct): Add lit4_seg_name and lit4_seg fields.
        (XTENSA_PROP_*, GET_XTENSA_PROP_*, SET_XTENSA_PROP_*): Define.
        (frag_flags struct): New.
        (xtensa_block_info struct): Move from tc-xtensa.h.  Add flags field.
        (subseg_map struct): Add cur_total_freq and cur_target_freq fields.
        (bitfield, bit_is_set, set_bit, clear_bit): Define.
        (MAX_FORMATS): Define.
        (op_placement_info struct, op_placement_table): New.
        (O_pltrel, O_hi16, O_lo16): Define.
        (directiveE enum): Rename directive_generics to directive_transform.
        Delete directive_relax.  Add directive_schedule,
        directive_absolute_literals, and directive_last_directive.
        (directive_info): Rename "generics" to "transform".  Delete "relax".
        Add "schedule" and "absolute-literals".
        (directive_state): Adjust entries to match changes in directive_info.
        (xtensa_relax_statesE, RELAX_IMMED_MAXSTEPS): Move to tc-xtensa.h.
        (xtensa_const16_opcode, xtensa_movi_opcode, xtensa_movi_n_opcode,
        xtensa_l32r_opcode, xtensa_nop_opcode, xtensa_rsr_lcount_opcode): New.
        (xtensa_j_opcode, xtensa_rsr_opcode): Delete.
        (align_only_targets, software_a0_b_retw_interlock,
        software_avoid_b_j_loop_end, maybe_has_b_j_loop_end,
        software_avoid_short_loop, software_avoid_close_loop_end,
        software_avoid_all_short_loops, specific_opcode): Delete.
        (warn_unaligned_branch_targets): New.
        (workaround_a0_b_retw, workaround_b_j_loop_end, workaround_short_loop,
        workaround_close_loop_end, workaround_all_short_loops): Default FALSE.
        (option_[no_]link_relax, option_[no_]transform,
        option_[no_]absolute_literals, option_warn_unaligned_targets,
        option_prefer_l32r, option_prefer_const16, option_target_hardware):
        New enum values.
        (option_[no_]align_only_targets, option_literal_section_name,
        option_text_section_name, option_data_section_name,
        option_bss_section_name, option_eb, option_el): Delete.
        (md_longopts): Add entries for: [no-]transform, [no-]absolute-literals,
        warn-unaligned-targets, prefer-l32r, prefer-const16, [no-]link-relax,
        and target-hardware.  Delete entries for [no-]target-align-only,
        literal-section-name, text-section-name, data-section-name, and
        bss-section-name.
        (md_parse_option): Handle new options and remove old ones.  Accept but
        ignore [no-]density options.  Warn for [no-]generics and [no-]relax
        and treat them as [no-]transform.
        (md_show_usage): Add new options and remove old ones.
        (xtensa_setup_hw_workarounds): New.
        (md_pseudo_table): Change "word" entry to use xtensa_elf_cons.  Add
        "long", "short", "loc" and "frequency" entries.
        (use_generics): Rename to ...
        (use_transform): ... this function.  Add past_xtensa_end check.
        (use_longcalls): Add past_xtensa_end check.
        (code_density_available, can_relax): Delete.
        (do_align_targets): New.
        (get_directive): Accept dashes in directive names.  Warn about
        [no-]generics and [no-]relax directives and treat them as
        [no-]transform.
        (xtensa_begin_directive): Call md_flush_pending_output only for some
        directives.  Check for directives inside instruction bundles.  Warn
        about deprecated ".begin literal" usage.  Warn and ignore [no-]density
        directives.  Handle new directives.  Check generating_literals flag
        for literal_prefix.
        (xtensa_end_directive): Check for directives inside instruction
        bundles.  Warn and ignore [no-]density directives.  Handle new
        directives.  Call xtensa_set_frag_assembly_state.
        (xtensa_loc_directive_seen, xtensa_dwarf2_directive_loc,
        xtensa_dwarf2_emit_insn): New.
        (xtensa_literal_position): Call md_flush_pending_output.  Do not check
        use_literal_section flag.
        (xtensa_literal_pseudo): Call md_flush_pending_output.  Handle absolute
        literals.  Use xtensa_elf_cons to parse the expression.
        (xtensa_literal_prefix): Do not check use_literal_section.  Support
        ".lit4" sections for absolute literals.  Change prefix convention to
        replace ".text" (or ".t" in a linkonce section).  No need to call
        subseg_set.
        (xtensa_frequency_pseudo, xtensa_elf_cons, xtensa_elf_suffix): New.
        (expression_end): Handle closing braces and colons.
        (PLT_SUFFIX, plt_suffix): Delete.
        (expression_maybe_register): Use new xtensa-isa.h functions.  Use
        xtensa_elf_suffix instead of checking for plt suffix, and handle O_lo16
        and O_hi16 expressions as well.
        (tokenize_arguments): Handle closing braces and colons.
        (parse_arguments): Use new xtensa-isa.h functions.  Handle "invisible"
        operands and paired register syntax.
        (get_invisible_operands): New.
        (xg_translate_sysreg_op): Handle new Xtensa LX RSR/WSR/XSR syntax.  Use
        new xtensa-isa.h functions.
        (xtensa_translate_old_userreg_ops, xtensa_translate_zero_immed): New.
        (xg_translate_idioms): Check if inside bundle.  Use use_transform.
        Handle new Xtensa LX RSR/WSR/XSR syntax.  Remove code to widen density
        instructions.  Use xtensa_translate_zero_immed.
        (operand_is_immed, operand_is_pcrel_label): Delete.
        (get_relaxable_immed): Use new xtensa-isa.h functions.
        (get_opcode_from_buf): Add slot parameter.  Use new xtensa-isa.h
        functions.
        (xtensa_print_insn_table, print_vliw_insn): New.
        (is_direct_call_opcode): Use new xtensa-isa.h functions.
        (is_call_opcode, is_loop_opcode, is_conditional_branch_opcode,
        is_branch_or_jump_opcode): Delete.
        (is_movi_opcode, decode_reloc, encode_reloc, encode_alt_reloc): New.
        (opnum_to_reloc, reloc_to_opnum): Delete.
        (xtensa_insnbuf_set_operand, xtensa_insnbuf_get_operand): Use new
        xtensa-isa.h functions.  Operate on one slot of an instruction.
        (xtensa_insnbuf_set_immediate_field, is_negatable_branch,
        xg_get_insn_size): Delete.
        (xg_get_build_instr_size): Use xg_get_single_size.
        (xg_is_narrow_insn, xg_is_single_relaxable_insn): Update calls to
        xg_build_widen_table.  Use xg_get_single_size.
        (xg_get_max_narrow_insn_size): Delete.
        (xg_get_max_insn_widen_size, xg_get_max_insn_widen_literal_size,
        xg_is_relaxable_insn): Update calls to xg_build_widen_table.  Use
        xg_get_single_size.
        (xg_build_to_insn): Record the loc field.  Handle OP_OPERAND_HI16U and
        OP_OPERAND_LOW16U.  Check xg_valid_literal_expression.
        (xg_expand_to_stack, xg_expand_narrow): Update calls to
        xg_build_widen_table.  Use xg_get_single_size.
        (xg_immeds_fit): Use new xtensa-isa.h functions.  Update call to
        xg_check_operand.
        (xg_symbolic_immeds_fit): Likewise.  Also handle O_lo16 and O_hi16, and
        treat weak symbols conservatively.
        (xg_check_operand): Use new xtensa-isa.h functions.
        (is_dnrange): Delete.
        (xg_assembly_relax): Inline previous calls to tinsn_copy.
        (xg_finish_frag): Specify separate relax states for the frag and slot0.
        (is_branch_jmp_to_next, xg_add_branch_and_loop_targets): Use new
        xtensa-isa.h functions.
        (xg_instruction_matches_option_term, xg_instruction_matches_or_options,
        xg_instruction_matches_options): New.
        (xg_instruction_matches_rule): Handle O_register expressions.  Call
        xg_instruction_matches_options.
        (transition_rule_cmp): New.
        (xg_instruction_match): Update call to xg_build_simplify_table.
        (xg_build_token_insn): Record loc fields.
        (xg_simplify_insn): Check is_specific_opcode field and
        density_supported flag.
        (xg_expand_assembly_insn): Skip checking code_density_available.  Use
        new xtensa-isa.h functions.  Call use_transform instead of can_relax.
        (xg_assemble_literal): Add error handling for O_big.  Call
        record_alignment.  Handle O_pltrel.
        (xg_valid_literal_expression): New.
        (xg_assemble_literal_space): Add slot parameter.  Remove call to
        set_expr_symbol_offset.  Add call to record_alignment.  Update call to
        xg_finish_frag.
        (xg_emit_insn): Delete.
        (xg_emit_insn_to_buf): Add format parameter.  Update calls to
        xg_add_opcode_fix and xtensa_insnbuf_to_chars.
        (xg_add_opcode_fix): Change opcode parameter to tinsn and add format
        and slot parameters.  Handle new "alternate" relocations for absolute
        literals and CONST16 instructions.  Check for bad uses of O_lo16 and
        O_hi16.  Use new xtensa-isa.h functions.
        (xg_assemble_tokens): Delete.
        (is_register_writer): Use new xtensa-isa.h functions.
        (is_bad_loopend_opcode): Check for xtensa_rsr_lcount_opcode instead of
        old-style RSR from LCOUNT.
        (next_frag_opcode): Delete.
        (next_frag_opcode_is_loop, next_frag_format_size, frag_format_size,
        update_next_frag_state): New.
        (update_next_frag_nop_state): Delete.
        (next_frag_pre_opcode_bytes): Use next_frag_opcode_is_loop.
        (xtensa_mark_literal_pool_location): Check use_literal_section flag and
        the state of the absolute-literals directive.  Add calls to
        record_alignment and xtensa_set_frag_assembly_state.  Call
        xtensa_switch_to_non_abs_literal_fragment instead of
        xtensa_switch_to_literal_fragment.
        (build_nop): New.
        (assemble_nop): Use build_nop.  Update call to xtensa_insnbuf_to_chars.
        (get_expanded_loop_offset): Change check for undefined opcode to an
        assertion.
        (xtensa_set_frag_assembly_state, relaxable_section,
        xtensa_find_unmarked_state_frags, xtensa_find_unaligned_branch_targets,
        xtensa_find_unaligned_loops, xg_apply_tentative_value): New.
        (md_begin): Update call to xtensa_isa_init.  Initialize linkrelax to 1.
        Set lit4_seg_name.  Call xg_init_vinsn.  Initialize new global opcodes.
        Call init_op_placement_info_table and xtensa_set_frag_assembly_state.
        (xtensa_init_fix_data): New.
        (xtensa_frob_label): Reset label symbol to the current frag.  Check
        do_align_targets and generating_literals flag.  Propagate frequency
        info to new alignment frag.  Call xtensa_set_frag_assembly_state.
        (xtensa_unrecognized_line): New.
        (xtensa_flush_pending_output): Check if inside a bundle.  Add a call
        to xtensa_set_frag_assembly_state.
        (error_reset_cur_vinsn): New.
        (md_assemble): Remove check for literal frag.  Remove call to
        istack_init.  Call use_transform instead of use_generics.  Parse
        explicit instruction format specifiers.  Move code for
        a0_b_retw_interlock workaround to xg_assemble_vliw_tokens.  Call
        error_reset_cur_vinsn on errors.  Add call to get_invisible_operands.
        Add dwarf2_where call.  Remote automatic alignment for ENTRY
        instructions.  Move call to xtensa_clear_insn_labels to the end.
        Rearrange to handle bundles.
        (xtensa_cons_fix_new): Delete.
        (xtensa_handle_align): New.
        (xtensa_frag_init): Call xtensa_set_frag_assembly_state.  Remove
        assignment to is_no_density field.
        (md_pcrel_from): Use new xtensa-isa.h functions.  Use decode_reloc
        instead of reloc_to_opnum.  Handle "alternate" relocations.
        (xtensa_force_relocation, xtensa_check_inside_bundle,
        xtensa_elf_section_change_hook): New.
        (xtensa_symbol_new_hook): Delete.
        (xtensa_fix_adjustable): Check for difference of symbols with an
        offset.  Check for external and weak symbols.
        (md_apply_fix3): Remove cases for XTENSA_OP{0,1,2} relocs.
        (md_estimate_size_before_relax): Return expansion for the first slot.
        (tc_gen_reloc): Handle difference of symbols by producing
        XTENSA_DIFF{8,16,32} relocs and by writing the value of the difference
        into the output.  Handle new XTENSA_SLOT*_OP relocs by storing the
        tentative values into the output when linkrelax is set.
        (XTENSA_PROP_SEC_NAME): Define.
        (xtensa_post_relax_hook): Call xtensa_find_unmarked_state_frags.
        Create literal tables only if using literal sections.  Create new
        property tables instead of old instruction tables.  Check for unaligned
        branch targets and loops.
        (finish_vinsn, find_vinsn_conflicts, check_t1_t2_reads_and_writes,
        new_resource_table, clear_resource_table, resize_resource_table,
        resources_available, reserve_resources, release_resources,
        opcode_funcUnit_use_unit, opcode_funcUnit_use_stage,
        resources_conflict, xg_find_narrowest_format, relaxation_requirements,
        bundle_single_op, emit_single_op, xg_assemble_vliw_tokens): New.
        (xtensa_end): Call xtensa_flush_pending_output.  Set past_xtensa_end
        flag.  Update checks for workaround options.  Call
        xtensa_mark_narrow_branches and xtensa_mark_zcl_first_insns.
        (xtensa_cleanup_align_frags): Add special case for branch targets.
        Check for and mark unreachable frags.
        (xtensa_fix_target_frags): Remove use of align_only_targets flag.
        Use RELAX_LOOP_END_BYTES in special case for negatable branch at the
        end of a zero-overhead loop body.
        (frag_can_negate_branch): Handle instructions with multiple slots.
        Use new xtensa-isa.h functions
        (xtensa_mark_narrow_branches, is_narrow_branch_guaranteed_in_range,
        xtensa_mark_zcl_first_insns): New.
        (xtensa_fix_a0_b_retw_frags, xtensa_fix_b_j_loop_end_frags): Error if
        transformations are disabled.
        (next_instrs_are_b_retw): Use new xtensa-isa.h functions.  Handle
        multislot instructions.
        (xtensa_fix_close_loop_end_frags, xtensa_fix_short_loop_frags):
        Likewise.  Also error if transformations are disabled.
        (unrelaxed_frag_max_size): New.
        (unrelaxed_frag_min_insn_count, unrelax_frag_has_b_j): Use new
        xtensa-isa.h functions.
        (xtensa_sanity_check, is_empty_loop, is_local_forward_loop): Use
        xtensa_opcode_is_loop instead of is_loop_opcode.
        (get_text_align_power): Replace as_fatal with assertion.
        (get_text_align_fill_size): Iterate instead of using modulus when
        use_nops is false.
        (get_noop_aligned_address): Assert that this is for a machine-dependent
        RELAX_ALIGN_NEXT_OPCODE frag.  Use next_frag_opcode_is_loop,
        xg_get_single_size, and frag_format_size.
        (get_widen_aligned_address): Rename to ...
        (get_aligned_diff): ... this function.  Add max_diff parameter.
        Remove handling of rs_align/rs_align_code frags.  Use
        next_frag_format_size, get_text_align_power, get_text_align_fill_size,
        next_frag_opcode_is_loop, and xg_get_single_size.  Compute max_diff
        and pass it back to caller.
        (xtensa_relax_frag): Use relax_frag_loop_align.  Add code for new
        RELAX_SLOTS, RELAX_MAYBE_UNREACHABLE, RELAX_MAYBE_DESIRE_ALIGN,
        RELAX_FILL_NOP, and RELAX_UNREACHABLE frag types.  Check relax_seen.
        (relax_frag_text_align): Rename to ...
        (relax_frag_loop_align): ... this function.  Assume loops can only be
        in the first slot of an instruction.
        (relax_frag_add_nop): Use assemble_nop instead of constructing an OR
        instruction.  Remove call to frag_wane.
        (relax_frag_narrow): Rename to ...
        (relax_frag_for_align): ... this function.  Extend to handle
        RELAX_FILL_NOP and RELAX_UNREACHABLE, as well as RELAX_SLOTS with
        RELAX_NARROW for the first slot.
        (find_address_of_next_align_frag, bytes_to_stretch): New.
        (future_alignment_required): Use find_address_of_next_align_frag and
        bytes_to_stretch.  Look ahead to subsequent frags to make smarter
        alignment decisions.
        (relax_frag_immed): Add format, slot, and estimate_only parameters.
        Check if transformations are enabled for b_j_loop_end workaround.
        Use new xtensa-isa.h functions and handle multislot instructions.
        Update call to xg_assembly_relax.
        (md_convert_frag): Handle new RELAX_SLOTS, RELAX_UNREACHABLE,
        RELAX_MAYBE_UNREACHABLE, RELAX_MAYBE_DESIRE_ALIGN, and RELAX_FILL_NOP
        frag types.
        (convert_frag_narrow): Add segP, format and slot parameters.  Call
        convert_frag_immed for branch instructions.  Adjust calls to
        tinsn_from_chars, tinsn_immed_from_frag, and xg_emit_insn_to_buf.  Use
        xg_get_single_size and xg_get_single_format.
        (convert_frag_fill_nop): New.
        (convert_frag_immed): Add format and slot parameters.  Handle multislot
        instructions and use new xtensa-isa.h functions.  Update calls to
        tinsn_immed_from_frag and xg_assembly_relax.  Check if transformations
        enabled for b_j_loop_end workaround.  Use build_nop instead of
        assemble_nop.  Check is_specific_opcode flag.  Check for unreachable
        frags.  Use xg_get_single_size.  Handle O_pltrel.
        (fix_new_exp_in_seg): Remove check for old plt flag.
        (convert_frag_immed_finish_loop): Update calls to tinsn_from_chars and
        xtensa_insnbuf_to_chars.  Call tinsn_immed_from_frag.  Change check
        for loop opcode to an assertion.  Mark all frags up to the end of the
        loop as not transformable.
        (get_last_insn_flags, set_last_insn_flags): Use get_subseg_info.
        (get_subseg_info): New.
        (xtensa_move_literals): Call xtensa_set_frag_assembly_state.  Add null
        check for dest_seg.
        (xtensa_switch_to_literal_fragment): Rewrite to handle absolute
        literals and use xtensa_switch_to_non_abs_literal_fragment otherwise.
        (xtensa_switch_to_non_abs_literal_fragment): New.
        (cache_literal_section): Add is_code parameter and pass it through to
        retrieve_literal_seg.
        (retrieve_literal_seg): Add is_code parameter and use it to set the
        flags on the literal section.  Handle case where head parameter is 0.
        (get_frag_is_no_transform, set_frag_is_specific_opcode,
        set_frag_is_no_transform): New.
        (xtensa_create_property_segments): Add end_property_function parameter
        and pass it through to add_xt_block_frags.  Call bfd_get_section_flags
        and skip SEC_DEBUGGING and !SEC_ALLOC sections.
        (xtensa_create_xproperty_segments, section_has_xproperty): New.
        (add_xt_block_frags): Add end_property_function parameter and call it
        if it is non-zero.  Call xtensa_frag_flags_init.
        (xtensa_frag_flags_is_empty, xtensa_frag_flags_init,
        get_frag_property_flags, frag_flags_to_number,
        xtensa_frag_flags_combinable, xt_block_aligned_size,
        xtensa_xt_block_combine, add_xt_prop_frags,
        init_op_placement_info_table, opcode_fits_format_slot,
        xg_get_single_size, xg_get_single_format): New.
        (istack_push): Inline call to tinsn_copy.
        (tinsn_copy): Delete.
        (tinsn_has_invalid_symbolic_operands): Handle O_hi16 and O_lo16 and
        CONST16 opcodes.  Handle O_big, O_illegal, and O_absent.
        (tinsn_has_complex_operands): Handle O_hi16 and O_lo16.
        (tinsn_to_insnbuf): Use xg_get_single_format and new xtensa-isa.h
        functions.  Handle invisible operands.
        (tinsn_to_slotbuf): New.
        (tinsn_check_arguments): Use new xtensa-isa.h functions.
        (tinsn_from_chars): Add slot parameter.  Rewrite using xg_init_vinsn,
        vinsn_from_chars, and xg_free_vinsn.
        (tinsn_from_insnbuf): New.
        (tinsn_immed_from_frag): Add slot parameter and handle multislot
        instructions.  Handle symbol differences.
        (get_num_stack_text_bytes): Use xg_get_single_size.
        (xg_init_vinsn, xg_clear_vinsn, vinsn_has_specific_opcodes,
        xg_free_vinsn, vinsn_to_insnbuf, vinsn_from_chars, expr_is_register,
        get_expr_register, set_expr_symbol_offset_diff): New.
        * config/tc-xtensa.h (MAX_SLOTS): Define.
        (xtensa_relax_statesE): Move from tc-xtensa.c. Add
        RELAX_CHECK_ALIGN_NEXT_OPCODE, RELAX_MAYBE_DESIRE_ALIGN, RELAX_SLOTS,
        RELAX_FILL_NOP, RELAX_UNREACHABLE, RELAX_MAYBE_UNREACHABLE, and
        RELAX_NONE types.
        (RELAX_IMMED_MAXSTEPS): Move from tc-xtensa.c.
        (xtensa_frag_type struct): Add is_assembly_state_set,
        use_absolute_literals, relax_seen, is_unreachable, is_specific_opcode,
        is_align, is_text_align, alignment, and is_first_loop_insn fields.
        Replace is_generics and is_relax fields by is_no_transform field.
        Delete is_text and is_longcalls fields.  Change text_expansion and
        literal_expansion to arrays of MAX_SLOTS entries.  Add arrays of
        per-slot information: literal_frags, slot_subtypes, slot_symbols,
        slot_sub_symbols, and slot_offsets.  Add fr_prev field.
        (xtensa_fix_data struct): New.
        (xtensa_symfield_type struct): Delete plt field.
        (xtensa_block_info struct): Move definition to tc-xtensa.h.  Add
        forward declaration here.
        (xt_section_type enum): Delete xt_insn_sec.  Add xt_prop_sec.
        (XTENSA_SECTION_RENAME): Undefine.
        (TC_FIX_TYPE, TC_INIT_FIX_DATA, TC_FORCE_RELOCATION, NO_PSEUDO_DOT,
        tc_unrecognized_line, md_do_align, md_elf_section_change_hook,
        HANDLE_ALIGN, TC_LINKRELAX_FIXUP, SUB_SEGMENT_ALIGN): Define.
        (TC_CONS_FIX_NEW, tc_symbol_new_hook): Delete.
        (unit_num_copies_func, opcode_num_units_func,
        opcode_funcUnit_use_unit_func, opcode_funcUnit_use_stage_func): New.
        (resource_table struct): New.
        * config/xtensa-istack.h (MAX_INSN_ARGS): Increase from 6 to 10.
        (TInsn struct): Add keep_wide, loc, fixup, record_fix, subtype,
        literal_space, symbol, sub_symbol, offset, and literal_frag fields.
        (tinsn_copy): Delete prototype.
        (vliw_insn struct): New.
        * config/xtensa-relax.c (insn_pattern_struct): Add options field.
        (widen_spec_list): Add option conditions for density and boolean
        instructions.  Add expansions using CONST16 and conditions for using
        CONST16 vs. L32R.  Use new Xtensa LX RSR/WSR syntax.  Add entries for
        predicted branches.
        (simplify_spec_list): Add option conditions for density instructions.
        Add entry for NOP instruction.
        (append_transition): Add cmp function pointer parameter and use it to
        insert the new entry in order.
        (operand_function_LOW16U, operand_function_HI16U): New.
        (xg_has_userdef_op_fn, xg_apply_userdef_op_fn): Handle
        OP_OPERAND_LOW16U and OP_OPERAND_HI16U.
        (enter_opname, split_string): Use xstrdup instead of strdup.
        (init_insn_pattern): Initialize new options field.
        (clear_req_or_option_list, clear_req_option_list,
        clone_req_or_option_list, clone_req_option_list, parse_option_cond):
        New.
        (parse_insn_pattern): Parse option conditions.
        (transition_applies): New.
        (build_transition): Use new xtensa-isa.h functions.  Fix incorrectly
        swapped last arguments in calls to append_constant_value_condition.
        Call clone_req_option_list.  Add warning about invalid opcode.
        Handle LOW16U and HI16U function names.
        (build_transition_table): Add cmp parameter and use it in calls to
        append_transition.  Use new xtensa-isa.h functions.  Check
        transition_applies before adding entries.
        (xg_build_widen_table, xg_build_simplify_table): Add cmp parameter and
        pass it through to build_transition_table.
        * config/xtensa-relax.h (ReqOrOptionList, ReqOrOption, ReqOptionList,
        ReqOption, transition_cmp_fn): New types.
        (OpType enum): Add OP_OPERAND_LOW16U and OP_OPERAND_HI16U.
        (transition_rule struct): Add options field.
        * doc/as.texinfo (Overview): Update Xtensa options.
        * doc/c-xtensa.texi (Xtensa Options): Delete --[no-]density,
        --[no-]relax, and --[no-]generics options.  Update descriptions of
        --text-section-literals and --[no-]longcalls.  Add
        --[no-]absolute-literals and --[no-]transform.
        (Xtensa Syntax): Add description of syntax for FLIX instructions.
        Remove use of "generic" and "specific" terminology for opcodes.
        (Xtensa Registers): Generalize the syntax description to include
        user-defined register files.
        (Xtensa Automatic Alignment): Update.
        (Xtensa Branch Relaxation): Mention limitation of unconditional jumps.
        (Xtensa Call Relaxation): Linker can now remove most of the overhead.
        (Xtensa Directives): Remove confusing rules about precedence.
        (Density Directive, Relax Directive): Delete.
        (Schedule Directive): New.
        (Generics Directive): Rename to ...
        (Transform Directive): ... this node.
        (Literal Directive): Update for absolute literals.  Missing
        literal_position directive is now an error.
        (Literal Position Directive): Update for absolute literals.
        (Freeregs Directive): Delete.
        (Absolute Literals Directive): New.
        (Frame Directive): Minor editing.
        * Makefile.am (DEPTC_xtensa_elf, DEPOBJ_xtensa_elf, DEP_xtensa_elf):
        Update dependencies.
        * Makefile.in: Regenerate.

2004-10-07  Richard Sandiford  <rsandifo@redhat.com>

        * config/tc-mips.c (append_insn): Use fix_new rather than fix_new_exp
        to build the second and third fixups for a composite relocation.
        (macro_read_relocs): New function.
        (macro_build): Use it.
        (s_cpsetup): Pass all three composite relocation codes to macro_build.
        Simplify fragging code accordingly.
        (s_gpdword): Use fix_new rather than fix_new_exp for the second part
        of the composite relocation.  Set fx_tcbit in both fixups.

2004-10-07  Richard Sandiford  <rsandifo@redhat.com>

        * config/tc-mips.c (append_insn): Set fx_tcbit for composite relocs.
        (md_apply_fix3): Don't treat composite relocs as done.

2004-10-07  Jan Beulich <jbeulich@novell.com>

        * macro.c (macro_expand_body): When ELF, use .LL rather than LL as
        prefix for symbol names generated from the LOCAL macro directive.

        * dw2gencfi.c (select_cie_for_fde): When separating CIE out from
        FDE, treat a DW_CFA_remember_state as we do a DW_CFA_advance_loc.

2004-10-07  Tomer Levi  <Tomer.Levi@nsc.com>

        * config/tc-crx.c (preprocess_reglist): Handle Co-processor
        Special registers.
        (md_assemble): Add error checking for Co-Processor instructions.
        (get_cinv_parameters): Add 'b' option to invalidate the
        branch-target cache.

2004-10-05  Paul Brook  <paul@codesourcery.com>

        * config/tc-arm.c (unwind): New variable.
        (vfp_sp_encode_reg): New function.
        (vfp_sp_reg_required_here): Use it.
        (vfp_sp_reg_list, vfp_dp_reg_list): Remove.
        (vfp_parse_reg_list): New function.
        (s_arm_unwind_fnstart, s_arm_unwind_fnend, s_arm_unwind_cantunwind,
        s_arm_unwind_personality, s_arm_unwind_personalityindex,
        s_arm_unwind_handlerdata, s_arm_unwind_save, s_arm_unwind_movsp,
        s_arm_unwind_pad, s_arm_unwind_setfp, s_arm_unwind_raw): New
        functions.
        (md_pseudo_table): Add them.
        (do_vfp_reg2_from_sp2): Use vfp_parse_reg_list and vfp_sp_encode_reg.
        (do_vfp_sp2_from_reg2, vfp_sp_ldstm, vfp_dp_ldstm): Ditto.
        (set_section, add_unwind_adjustsp, flush_pending_unwind,
        finish_unwind_opcodes, start_unwind_section, create_unwind_entry,
        require_hashconst, add_unwind_opcode): New functions.
        * doc/c-arm.texi: Document unwinding opcodes.
        * NEWS: Mention the new feature.

2004-10-04  Eric Christopher  <echristo@redhat.com>

        * config/tc-mips.c (md_apply_fix3): Remove erroneous assert.

2004-10-01  H.J. Lu  <hongjiu.lu@intel.com>

        * config/tc-ppc.c (md_apply_fix3): Call S_SET_THREAD_LOCAL for
        TLS relocations.
        * config/tc-s390.c (md_apply_fix3): Likewise.
        * config/tc-sparc.c (md_apply_fix3): Likewise.

2004-10-01  Paul Brook  <paul@codesourcery.com>

        * config/tc-arm.c (arm_elf_section_type): New function.
        (arm_elf_change_section): Set section link for exidx sections.
        * config/tc-arm.h (arm_elf_section_type): Add prototype.
        (md_elf_section_type): Define.

2004-10-01  Bill Farmer  <Bill@the-farmers.freeserve.co.uk>

        * config/tc-pdp11.c (md_apply_fix3): Change to sign of the SOB
        instruction's offset.

2004-10-01  Adam Nemet  <anemet@lnxw.com>

        * (TARGET_FORMAT): Remove LynxOS COFF definition.

2004-10-01  Ravi Ramaseshan  <ravi.ramaseshan@codito.com>

        * config/tc-arc.c (tc_gen_reloc): Don't assume fixP->fx_addsy is an
        asymbol *, instead use symbol_get_bfdsym.

2004-09-30  Linus Nielsen Feltzing  <linus@haxx.se>

        * config/tc-m68k.c (select_control_regs): Add mcf5249.

2004-09-30  Paul Brook  <paul@codesourcery.com>

        * config/tc-arm.c (do_smi, do_nop): New functions.
        (insns): Add ARMv6ZK instructions.
        (md_apply_fix3): Handle BFD_RELOC_ARM_SMI.
        (tc_gen_reloc): Ditto.
        (arm_cpus): Add mpcore and arm1176.
        (arm_archs): Add armv6{k,z,zk}.
        * doc/c-arm.texi: Document new cores and architectures.

2004-09-30  Nick Clifton  <nickc@redhat.com>

        * config/tc-arm.c: Use ISO C90 formatting.

2004-09-30  Vladimir Ivanov  <vladitx@nucleusys.com>

        * config/tc-arm.c (mav_reg_required_here): Allow REG_TYPE_CN
        as alternative when REG_TYPE_MVF, REG_TYPE_MVD, REG_TYPE_MVFX or
        REG_TYPE_MVDX is expected.

2004-09-29  Marc Bevand  <m.bevand@gmail.com>

        * doc/c-i386.texi (i386-Mnemonics): Fix typo.

2004-09-21  James E Wilson  <wilson@specifixinc.com>

        * config/tc-ia64.c (ENCODED_PSP_OFFSET): New.
        (output_rp_psprel, output_pfs_psprel, output_preds_psprel,
        output_spill_base, output_unat_psprel, output_lc_psprel,
        output_fpsr_psprel, output_priunat_psprel, output_bsp_psprel,
        output_bsprestore_psprel, output_rnat_psprel, output_spill_psprel,
        output_spill_psprel_p): Use it.

2004-09-20  Tomer Levi  <Tomer.Levi@nsc.com>

        * config/tc-crx.c (handle_LoadStor): New function.
        Handle load/stor unique instructions before parsing.

2004-09-17  Paul Brook  <paul@codesourcery.com>

        * config/tc-arm.c (s_arm_rel31): New funciton.
        (md_pseudo_table): Add .rel31.
        (md_apply_fix3): Handle BFD_RELOC_ARM_TARGET2,
        BFD_RELOC_32_PCREL and BFD_RELOC_ARM_PREL31.
        (tc_gen_reloc): Handle BFD_RELOC_ARM_PREL31 and BFD_RELOC_ARM_TARGET2.
        (arm_fix_adjustable): Return 0 for BFD_RELOC_ARM_TARGET2.
        (arm_parse_reloc): Add (target2).

2004-09-17  Alan Modra  <amodra@bigpond.net.au>

        * Makefile.am: Run "make dep-am".
        * Makefile.in: Regenerate.
        * aclocal.m4: Regenerate.
        * configure: Regenerate.
        * doc/Makefile.in: Regenerate.
        * po/POTFILES.in: Regenerate.
        * po/gas.pot: Regenerate.

2004-09-14  Hideki IWAMOTO  <h-iwamoto@kit.hi-ho.ne.jp>

        * config/tc-mmix.c [!LLONG_MIN]: Correct #elsif to #elif.
        [!LLONG_MAX]: Ditto.

2004-09-13  Paul Brook  <paul@codesourcery.com>

        * config/tc-arm.c: Rename RELABS to TARGET1.

2004-09-13  Alan Modra  <amodra@bigpond.net.au>

        * messages.c (as_internal_value_out_of_range): Cast values passed
        to as_bad_where or as_warn_where to proper type.

2004-09-11  Theodore A. Roth  <troth@openavr.org>

        * config/tc-avr.c: Add support for
        atmega48, atmega88, atmega168, attiny13, attiny2313, at90can128.

2004-09-09  Alan Modra  <amodra@bigpond.net.au>

        * dw2gencfi.c (select_cie_for_fde): When separating CIE out
        from FDE, treat a CFI_escape as we do a DW_CFA_advance_loc.

2004-09-08  Paul Brook  <paul@codesourcery.com>

        * config/obj-elf.c (obj_elf_section_type): Handle init_array,
        fini_array and preinit_array section types.
        * config/tc-ia64.c (ia64_elf_section_type): Remove init_array
        and fini_array.
        * doc/as.texinfo: Document extra section types.

2004-09-02  Mark Mitchell  <mark@codesourcery.com>

        * Makefile.am (TARG_ENV_HFILES): Add te-symbian.h.
        * Makefile.in: Regenerated.
        * configure.in: Set em for arm*-*-symbianelf*.
        * configure: Regenerated.
        * config/tc-arm.c (elf32_arm_target_format): Use Symbian target
        vectors when appropriate.
        * config/te-symbian.h: New file.

2004-09-03  Tomer Levi  <Tomer.Levi@nsc.com>

        * config/tc-crx.c (gettrap): Exception vector can be case
        insensitive.
        (process_label_constant): Fix a 32-bit displacement bug in branch
        instructions.
        (get_operandtype) : Bug fix, wrong operand was used.
        (process_label_constant): Initialize relocation type to
        BFD_RELOC_NONE

2004-09-01  Richard Earnshaw < reanrsha@arm.com>

        * tc-arm.c (arm_cpus, arm_fpus): Allow <cpu>-s as well as <cpu>s
        for synthesizable cores.

        * doc/c-arm.texi (ARM Options): Document canonical names of CPUs.

2004-08-25  Dmitry Diky  <diwil@spec.ru>

        * config/tc-msp430.c:   Clean-up the code.
        (md_relax_table): New relax table.
        (mcu_types): Sort MCU types.
        (md_pseudo_table): Add .profiler pseudo handler.
        (pow2value): New function.
        (msp430_profiler): New function.
        (msp430_operands): Add new insns handlers.
        (msp430_srcoperand): Add register operand handler, allow complex
        expressions.
        (md_estimate_size_before_relax): Rewritten.
        (md_convert_frag): Rewritten.
        (msp430_relax_frag): New function.
        * config/tc-msp430.h (md_relax_frag): define macro
        * doc/c-msp430.texi: Update information.

2004-08-24  Nick Clifton  <nickc@redhat.com>

        * as.c (std_shortopts): Allow -g to take an optional argument.
        (parse_args): Pass any switch starting with -g on to the backend
        for parsing.

2004-08-18  Mark Mitchell  <mark@codesourcery.com>

        * configure.in (arm*-*-symbianelf*): New target.
        (arm*-*-eabi*): Likewise.
        * configure: Regenerated.

2004-08-18  Thiemo Seufer  <seufer@csv.ica.uni-stuttgart.de>
        * config/tc-mips.c (append_insn): Handle delay slots in branch likely
        correctly.

2004-08-18  Jakub Jelinek  <jakub@redhat.com>

        * config/tc-ia64.c (start_unwind_section): Add linkonce_empty
        argument, don't do anything if current section is not
        .gnu.linkonce.t.* and linkonce_empty is set.
        (generate_unwind_image, dot_endp): Adjust callers, call
        start_unwind_section (*, 1) if nothing will be put into the
        section.

2004-08-17  Nick Clifton  <nickc@redhat.com>

        * as.c (MD_DEBUG_FORMAT_SELECTOR): Provide default definition.
        (show_usage): Add -g.
        (std_longopts): Add --gen-debug.  Alpha sort the table.
        (parse_args): Print an error message if a switch is not handled.
        Handle the -g switch, calling md_debug_format_selector() if
        necessary.
        * NEWS: Mention new feature.
        * doc/as.texinfo: Document new switch.
        * doc/internals.texi: Document behaviour of md_parse_option.

        * config/tc-arm.c (md_parse_option): Do not issue an error message
        if the switch is not recognised.
        * config/tc-m68k.c (md_parse_option): Likewise.
        * config/tc-pdp11.c (md_parse_option): Likewise.
        * config/tc-v850.c (md_parse_option): Likewise.

        * as.h: Fix up formatting.
        * tc.h: Likewise.

2004-08-16  Nick Clifton  <nickc@redhat.com>

        * macro.c (macro_set_alternate): Use ISO C90 formatting.

        * configure.in: Sort architecture based tables alphabetically.
        * configure: Regenerate.

2004-08-16  Alan Modra  <amodra@bigpond.net.au>

        * config/tc-ppc.c (tc_ppc_regname_to_dw2regnum <regnames>): Replace
        { "cc", 68 }, with { "cr", 70 }.

2004-08-13 Jan Beulich <jbeulich@novell.com>
           Nick Clifton <nickc@redhat.com>

        * as.c: Add and handle new --alternate command line option.
        * macro.c (macro_set_alternate): New.
        * macro.h (macro_set_alternate): Declare.
        * read.c: Add and handle new .altmacro and .noaltmacro directives.
        * doc/as.texinfo: Document new command line option and pseudo-ops
        as well as insert documentation originating from gasp about
        alternate macro syntax.
        * NEWS: Mention new command line option and pseudo-ops.

2004-08-10  Mark Mitchell  <mark@codesourcery.com>

        * expr.c (operand): Handle the "~", "-", and "!" operators applied
        to bignums.

2004-08-06  Paul Brook  <paul@codesourcery.com>

        * config/tc-arm.c (md_apply_fix3, tc_gen_reloc, arm_parse_reloc):
        Handle new relocations.
        * include/elf/arm.h (elf_arm_reloc_type): Add new EABI relocations.

2004-08-05  Bob Wilson  <bob.wilson@acm.org>

        * write.c (relax_segment): Use was_address instead of address when
        setting fr_fix field for align frag due to backwards .org.

2004-07-29  Alexandre Oliva  <aoliva@redhat.com>

        Introduce SH2a support.
        2004-02-24  Corinna Vinschen  <vinschen@redhat.com>
        * config/tc-sh.c (get_specific): Change arch_sh2a_up to
        arch_sh2a_nofpu_up.
        2004-02-24  Corinna Vinschen  <vinschen@redhat.com>
        * config/tc-sh.c (md_parse_option): Add sh2a-nofpu ISA handling.
        2004-02-20  Corinna Vinschen  <vinschen@redhat.com>
        * config/tc-sh.c (sh_elf_final_processing): Move sh2a recognition
        to end of conditional expression.
        2004-02-20  Corinna Vinschen  <vinschen@redhat.com>
        * config/tc-sh.c: Add sh2a-nofpu support.
        2003-12-29  DJ Delorie  <dj@redhat.com>
        * tc-sh.c: Add sh2a support.
        (parse_reg): Add tbr.
        (parse_at): Support @@(disp,tbr).
        (get_specific): Support sh2a opcodes.
        (insert4): New, for 4 byte relocs.
        (build_Mytes): Support sh2a opcodes.
        (md_apply_fix3_Mytes): Support sh2a opcodes.
        2003-12-02  Michael Snyder  <msnyder@redhat.com>
        * config/tc-sh.c (md_parse_option): Handle sh2a.
        (sh_elf_final_processing): Ditto.

2004-07-27  Jason Thorpe  <thorpej@wasabisystems.com>

        * config/tc-hppa.h (TARGET_FORMAT): Set to "elf32-hppa-netbsd"
        for TE_NetBSD.

2004-07-27  Alan Modra  <amodra@bigpond.net.au>

        * config/tc-ppc.c (ppc_frob_file_before_adjust): Warn if .toc too big.
        (ppc_arch): Expand comment.

2004-07-27  Tomer Levi  <Tomer.Levi@nsc.com>

        * config/tc-crx.c: Support evaluating the difference between two
        symbols.
        * config/tc-crx.h: Likewise.

2004-07-26  H.J. Lu  <hongjiu.lu@intel.com>

        * config/tc-ia64.c (start_unwind_section): Set the linked-to
        section.
        (ia64_elf_section_change_hook): Set the linked-to section for
        SHT_IA_64_UNWIND.

2004-07-26  Dmitry Diky  <diwil@spec.ru>

        * config/tc-msp430.c: Add new subtargets: msp430x1610,
        msp430x1611, msp430x1612, msp430x415, msp430x417, msp430xG437,
        msp430xG438, msp430xG439.

2004-07-25  Daniel Jacobowitz  <dan@debian.org>

        * doc/as.texinfo (Section, PushSection): Correct documentation
        for ELF.

2004-07-21  Jan Beulich  <jbeulich@novell.com>

        * config/tc-i386.c (optimize_imm): Adjust immediates to only those
        permissible for the selected instruction suffix.
        (match_template): Don't permit 64-bit general purpose operands in
        32-bit mode.
        (finalize_imm): Permit 64-bit immediates.
        (build_modrm_byte): Don't treat 32-bit addressing in 64-bit mode
        specially except for the width of the used base and/or index
        registers.  For 32-bit displacements, use sign-extended
        relocations only when using 64-bit addressing.
        Force zero displacement on rip-relative addressing when there is
        no other displacement.
        (i386_index_check): Don't treat 32-bit addressing in 64-bit mode
        specially except for the width of the used base and/or index
        registers.
        (parse_register): Disallow Reg64 registers in 32-bit mode.

        * config/tc-i386.c: For DefaultSize instructions, don't guess a 'q'
        suffix if the instruction doesn't support it.

2004-07-20  Maciej W. Rozycki  <macro@linux-mips.org>

        * config/tc-mips.c (append_insn): Handle constant expressions with
        no associated relocation.
        (mips_ip): Cancel the expression after use for the Q format
        specifier.
        (parse_relocation): Return no relocation for unsupported
        operators.
        (my_getSmallExpression): Return no relocation if no relocation
        operators are used.

2004-07-19  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>

        * config/obj-som.c (adjust_stab_sections): Add prototype.
        (obj_som_compiler, obj_som_version, obj_som_copyright,
        adjust_stab_sections): Add ATTRIBUTE_UNUSED to unused arguments.
        * config/tc-hppa.c (update_subspace):  Likewise.
        (is_defined_subspace): Amplify comment.
        * config/obj-som.h (som_frob_file): Add prototype.

2004-07-19  Christopher Faylor  <cgf@timesys.com>
            H.J. Lu  <hongjiu.lu@intel.com>

        * subsegs.c (section_symbol): Don't create a new segment when
        existing segment is undefined.

2004-07-16  Richard Earnshaw  <rearnsha@arm.com>

        * config/tc-arm.c: Include include/opcode/arm.h.
        (ARM_EXT_*, ARM_ARCH_*, ARM_ANY, ARM_ALL, COPROC_ANY): Delete.
        (FPU_FPA_EXT_* FPU_VFP_EXT_*, FPU_ANY, FPU_NONE, FPU_MAVERICK): Delete.
        (FPU_ARCH_*): Delete.
        * Makefile.am: Update dependencies.
        * Makefile.in: Regenerate.

2004-07-15  Nick Clifton  <nickc@redhat.com>

        * configure.in: Accept armbe as a big-endian arm configuration.
        * configure: Regenerate.

2004-07-13  Thomas Nystrom  <thn@saeab.se>

        * config/tc-i386.c (T_SHIFTOP): New constant.
        (intel_e05_1): Handle '&', '|' and T_SHIFTOP.
        (intel_el1): Handle '~'.
        (intel_get_token): Handle '<>', '&', '|' and '~'.

2004-07-13  Nick Clifton <nickc@redhat.com>

        (md_assemble): Remove spurious newline from end of as_bad error
        message.
        (intel_e05_1): Likewise.
        (intel_e11): Likewise.
        (intel_match_token): Likewise.

2004-07-11  Andreas Schwab  <schwab@suse.de>

        * config/tc-m68k.c: Convert to C90.  Remove redundant
        declarations.  Indentation fixup.
        [M68KCOFF]: Include "obj-coff.h" instead of declaring
        obj_coff_section ourselves.

2004-07-09  James E Wilson  <wilson@specifixinc.com>

        * config/tc-ia64.c (default_big_endian): New.
        (dot_byteorder, md_begin): Use it.
        (md_parse_option): Set it.

2004-07-09  Nick Clifton  <nickc@redhat.com>

        * configure.in: Change sh-sybmian-elf to sh-*-symbianelf.
        * configure: Regenerate.
        * NEWS: Change sh-sybmian-elf to sh-*-symbianelf.
        * config/tc-sh.c (sh_elf_final_processing): Use renamed version of
        sh_find_elf_flags if necessary.

2004-07-08  Richard Sandiford  <rsandifo@redhat.com>

        * config/tc-mips.c (mips_fix_adjustable): If the full addend is
        going to be split into more than one in-place addend, return 0
        for relocations against mergeable sections.  Associate comments
        with code.

2004-07-07  Tomer Levi  <Tomer.Levi@nsc.com>

        * Makefile.am (CPU_TYPES): Add crx.
        (TARGET_CPU_CFILES): Add config/tc-crx.c.
        (TARGET_CPU_HFILES): Add config/tc-crx.h.
        (DEPTC_crx_elf): New target.
        (DEPOBJ_crx_elf): Likewise.
        (DEP_crx_elf): Likewise.
        * Makefile.in: Regenerate.
        * configure.in: Add crx* target.
        * configure: Regenerate.
        * config/tc-crx.c: New file.
        * config/tc-crx.h: New file.
        * NEWS: Mention new target.

2004-07-06  Nick Clifton  <nickc@redhat.com>

        * config.in: Undefine TARGET_SYMBIAN by default.
        * configure.in:
        * configure: Regenerate. Add sh-symbian-elf target.  If
        selected define TARGET_SYMBIAN.
        * config/tc-sh.h (TARGET_FORMAT): Select a Symbian target
        format if TARGET_SYMBIAN has been defined.

        * output-file.c (output_file_create): Report the target format
        chosen when bfd_openw reports that it is invalid.

        * config/obj-coff.c (coff_pseudo_table): Only define the weak
        pseudo for BFD based assemblers.

2004-07-05  Andrew Stubbs <andrew.stubbs@superh.com>

        gas:
        * config/tc-sh.c (md_assemble): Change isspace to ISSPACE.
        (md_parse_option): Remove redundant -isa testing.
        Make bfd_arch variable const.
        (md_show_usage): Make bfd_arch variable const.

2004-07-03  James E Wilson  <wilson@specifixinc.com>

        * config/tc-ia64.c (emit_one_bundle): Check and set insn_addr.
        * config/tc-ia64.h (md_frag_check): Define.

2004-07-03  Aaron W. LaFramboise  <aaron98wiridge9@aaronwl.com>

        * config/obj-coff.c (obj_coff_weak): New .weak syntax for PE weak
        externals.
        * doc/as.texinfo (Weak): Document PE weak symbols.

2004-07-03  Richard Sandiford  <rsandifo@redhat.com>

        * config/tc-mips.c (HAVE_IN_PLACE_ADDENDS): New macro.
        (reloc_needs_lo_p): Only return true if HAVE_IN_PLACE_ADDENDS.
        (mips_frob_file): Rework so that only a single pass through the
        relocs is needed.  Allow %lo()s to have higher offsets than their
        corresponding %hi()s or %got()s.

2004-07-02  Nick Clifton  <nickc@redhat.com>

        * config/tc-arm.c (md_apply_fix3:BFD_RELOC_ARM_IMMEDIATE): Do not
        allow values which have come from undefined symbols.
        Always consider this fixup to have been processed as a reloc
        cannot be generated for it.

2004-07-02  Alan Modra  <amodra@bigpond.net.au>

        * frags.h (struct frag): Add has_code and insn_addr fields.
        * write.c (cvt_frag_to_fill): Invoke md_frag_check.
        * config/tc-ppc.c (md_assemble): Check and set insn_addr.
        * config/tc-ppc.h (md_frag_check): Define.

2004-06-28  Maciej W. Rozycki  <macro@linux-mips.org>

        * doc/Makefile.am (info): Rename goal to...
        (info-local): ... this, to preserve implicit dependencies.
        * doc/Makefile.in: Regenerate with automake 1.8.5.

2004-06-25  Kazuhiro Inaoka  <inaoka.kazuhiro@renesas.com>

        * config/tc-m32r.c (md_convert_frag): Changed for @PLT.
        (m32r_cgen_record_fixup_exp): Changed for  @GOTOFF, @GOT.
        (m32r_fix_adjustable): Changed for  @GOTOFF, @GOT, @PLT.
        (tc_gen_reloc): Likewise.
        (m32r_end_of_match): Add for @GOTOFF, @GOT, @PLT.
        (m32r_parse_name): Likewise.
        (m32r_cgen_parse_fix_exp): Likewise.
        * config/tc-m32r.h (md_parse_name): Define for @GOTOFF, @GOT, @PLT.
        (O_PIC_reloc): Likewise.
        (TC_CGEN_PARSE_FIX_EXP): Likewise..
        * cgen.c (gas_cgen_parse_operand): Add TC_CGEN_PARSE_FIX_EXP
        for @GOTOFF, @GOT, @PLT.

2004-06-21 Jan Beulich  <jbeulich@novell.com>

        * gas/symbols.c: While discarding ordinary local absolute symbols
        when --strip-local-absolute is in effect, retain file symbols.

2004-06-20  Andreas Schwab  <schwab@suse.de>

        * config/tc-m68k.c (mri_chip): Replace current_chip, not augment.
        (md_parse_option): Likewise.

2004-06-17  Jan Beulich <jbeulich@novell.com>

        * config/tc-i386.c: Deal with LEX_QM the same way as with LEX_AT.
        * config/te-netware.h: New file.
        * config/te-ppcnw.h: Delete: Obsolete.
        * configure.in: Eliminate ill NetWare targets. Make generic
        NetWare target use proper emulation.
        * Makefile.am: Eliminate reference to obsolete te-ppcnw.h, add
        reference to new te-netware.h.
        * configure: Regenerate.
        * Makefile.in: Regenerate.

2004-06-15  Martin Schwidefsky  <schwidefsky@de.ibm.com>

        * config/tc-s390.c (s390_insn): Avoid incorrect signed/unsigned
        comparison in .insn pseudo operation.

2004-06-15  Alan Modra  <amodra@bigpond.net.au>

        * config/obj-coff.c (coff_adjust_section_syms): Use
        bfd_get_section_size instead of bfd_get_section_size_before_reloc.
        (coff_frob_section): Likewise.
        * config/tc-mips.c (md_apply_fix3): Likewise.
        * config/obj-elf.c (elf_frob_file): Use bfd_set_section_size.
        (elf_frob_file_after_relocs): Likewise.

2004-06-10  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>

        * config/tc-hppa.c (log2): Rename to exact_log2.
        (pa_next_subseg): Delete unused function.
        (create_new_space): Mark unused arguments with ATTRIBUTE_UNUSED.
        (create_new_subspace): Likewise.

        Bug gas/213
        * config/tc-hppa.c (hppa_fix_adjustable): Allow reduction of fake
        labels.  Fix warning.

2004-05-28  DJ Delorie  <dj@redhat.com>

        * config/tc-mn10300.h (tc_fix_adjustable): Define.
        * config/tc-mn10300.c (mn10300_fix_adjustable): Don't adjust debug
        or non-merged symbols.

2004-05-28  H.J. Lu  <hongjiu.lu@intel.com>

        * config/tc-ia64.c (remove_marked_resource): Save, clear and
        restore the old slot when inserting srlz.i/srlz.d.

2004-05-28  Andrew Stubbs <andrew.stubbs@superh.com>

        * Makefile.am: Regenerate dependecies.
        * Makefile.in: Regenerate.
        * config/tc-sh.c (valid_arch): Make unsigned.
        (preset_target_arch): Likewise.
        (md_begin): Use new architecture flags system.
        (get_specific): Likewise.
        (assemble_ppi): Likewise.
        (md_assemble): Likewise. Also fix error check for bad opcodes.
        (md_parse_option): Likewise. Also generate -isa values according
        to the table in bfd/cpu-sh.c instead of just constants. Also
        allow <arch>-up ISA variants.
        (sh_elf_final_processing): Replace if-else chain with a call to
        sh_find_elf_flags().

2004-05-28  Peter Barada <peter@the-baradas.com>

        * config/gc-m68k.c(m68k_ip): Convert mode 5 addressing
        with zero offset into mode 2 addressing to save a word.

2004-05-27  H.J. Lu  <hongjiu.lu@intel.com>

        * config/tc-ia64.c (ar_is_in_integer_unit): Removed.
        (ar_is_only_in_integer_unit): New.
        (ar_is_only_in_memory_unit): New.
        (generate_unwind_image): Silence gcc on 32bit host.
        (md_assemble): Use ar_is_only_in_integer_unit instead of
        ar_is_in_integer_unit. Check AR access.

2004-05-27  Peter Barada  <peter@the-baradas.com>

        * config/tc-m68k.c (md_begin): Sort the opcode table into
        alphabetical order.
        (m68k_compare_opcode): New function to do the sorting.

2004-05-24  Peter Barada  <peter@the-baradas.com>

        * config/m68k-parse.y(operand): Allow for MAC/EMAC mask
        addressing on MIT style operands.
        * config/m68k-parse.y(yylex): Allow '-&' for predecrement
        w/mask addressing.
        * config/tc-m68k.c(install_operand): Comment 'G' and 'H' type
        operands.

2004-05-23  Alan Modra  <amodra@bigpond.net.au>

        * expr.c (operand, operator): Don't reject '++' and '--'.

2004-05-20  Richard Sandiford  <rsandifo@redhat.com>

        * config/tc-mips.c (append_insn): Use ISA-encoded addresses in MIPS16
        dwarf tables.

2004-05-17  Adam Nemet  <anemet@lnxw.com>

        * configure.in: Add ppc-*-lynxos*.  Update i386-*-lynxos* to ELF.
        * configure: Regenerate.

2004-05-13  Paul Brook  <paul@codesourcery.com>

        * dw2gencfi.c (output_cie):  Handle dwarf3 format CIE entries.

2004-05-13  Joel Sherrill <joel@oarcorp.com>

        * configure.in (or32-*-rtems*): Switch to elf.
        * configure: Regenerate.

2004-05-13  Nick Clifton  <nickc@redhat.com>

        * po/fr.po: Updated French translation.

2004-05-11  Nick Clifton  <nickc@redhat.com>

        * doc/as.texinfo (Section): Document G and T flags to .section
        directive.  Document the extra arguments that the G flag
        requires.  Document the #tls flag.

2004-05-11  H.J. Lu  <hongjiu.lu@intel.com>

        * subsegs.c (section_symbol): Create a new section symbol if
        the existing one doesn't match.
        * symbols.c (symbol_set_bfdsym): Don't reset BFD section symbol.

2004-05-07  Richard Sandiford  <rsandifo@redhat.com>

        * config/tc-mips.c (append_insn, mips_emit_delays): Extend -mfix-vr4120
        to cope with VR4181A errata MD(1) and MD(4).

2004-05-07  Brian Ford  <ford@vss.fsi.com>

        * NEWS: Mention .secrel32 for pe[i]-i386.

2004-05-07  Alexandre Oliva  <aoliva@redhat.com>

        * config/tc-frv.h (MAX_MEM_FOR_RS_ALIGN_CODE): New.
        (HANDLE_ALIGN): New.

2004-05-06  Daniel Jacobowitz  <dan@debian.org>

        * Makefile.am (DIST_SUBDIRS): Define.
        * aclocal.m4: Regenerate with automake 1.8.4.
        * Makefile.in: Likewise.
        * doc/Makefile.in: Likewise.

2004-05-06  David Mosberger-Tang  <davidm@hpl.hp.com>

        * config/tc-ia64.c (dot_serialize): Declare.
        (dot_serialize): New function.
        (md_pseudo_table): Add ".serialize.data" and
        ".serialize.instruction" directives.

2004-05-06  Nick Clifton  <nickc@redhat.com>

        * messages (as_internal_value_out_of_range): Print a message about
        a value being out of range.  Be consistent about whether the
        values are printed in decimal or hexadecimal.
        (as_warn_value_out_of_range): Generate a warning message about an
        out of range value.
        (as_bad_value_out_of_range): Generate an error message about an
        out of range value.
        * as.h: Prototype the new functions.
        * config/tc-alpha.c (insert_operand): Use new function.
        * config/tc-arc.c (arc_insert_operand): Likewise.
        * config/tc-mn10200.c (mn10200_insert_operand): Likewise.
        * config/tc-mn10300.c (mn10300_insert_operand): Likewise.
        * config/tc-ppc.c (ppc_insert_operand): Likewise.
        * config/tc-s390.c (s390_insert_operand): Likewise.
        * config/tc-v850.c (v850_insert_operand): Likewise.

2004-05-05  Alexandre Oliva  <aoliva@redhat.com>

        * configure.in: Set em=linux for frv-*-*linux*.
        * configure: Rebuilt.
        * config/tc-frv.h (TARGET_FORMAT): Use elf32-frvfdpic if...
        (frv_md_fdpic_enabled): New.
        * config/tc-frv.c (frv_md_fdpic_enabled): New.
        (DEFAULT_FDPIC): New.
        (frv_flags): Use DEFAULT_FDPIC.
        (frv_pic_flag): Likewise.
        (OPTION_NOPIC): New.
        (md_longopts): Add -mnopic.
        (md_parse_option): Handle it.
        (md_show_usage): Add -mfdpic and -mnopic.

2004-05-05  Peter Barada  <peter@the-baradas.com>

        * config/tc-m68k.c: Add find_cf_chip to print list of valid
        chips for invalid coldfire instructions, rename selectors
        for ColdFire sub-variants, add 521x,5249,547x,548x and aliases,
        add current_chip to track which chip is referred to(including save/restore),
        use current_chip to select control registers, not current_arch.
        (md_show_usage): Add new chips.
        * doc/c-m68k.texi: Document new command line switches.

2004-05-05  Jakub Jelinek  <jakub@redhat.com>

        * tc-s390.h (md_do_align, HANDLE_ALIGN): Remove.
        (NOP_OPCODE): Define.
        (s390_align_code): Remove prototype.
        * tc-s390.c (s390_align_code): Remove.

2004-05-04  H.J. Lu  <hongjiu.lu@intel.com>

        * config/tc-ia64.c (make_unw_section_name): Removed.
        (start_unwind_section): New function.
        (generate_unwind_image): Take const segT instead of const
        char *.
        (dot_handlerdata): Adjusted.
        (dot_endp): Likewise.

2004-05-02  H.J. Lu  <hongjiu.lu@intel.com>

        * config/obj-elf.c (obj_elf_change_section): Allow the
        ".note.GNU-stack" section has SHF_EXECINSTR.

2004-05-02  H.J. Lu  <hongjiu.lu@intel.com>

        * config/obj-elf.c (get_section): Return bfd_boolean.
        (obj_elf_change_section): Call bfd_get_section_by_name_if
        instead of bfd_map_over_sections.

2004-04-30  H.J. Lu  <hongjiu.lu@intel.com>

        * config/obj-elf.c (get_section): New function.
        (obj_elf_change_section): Support multiple sections with same
        name.

2004-04-30  Nick Clifton  <nickc@redhat.com>

        * config/tc-arm.c (create_register_alias): Fix typo checking for
        case sensitive register aliases.
        (co_proc_number): Use error message string in all_reg_maps[]
        array.
        (cp_reg_required_here): Likewise.
        (fp_reg_required_here): Likewise.

2004-04-29  Brian Ford  <ford@vss.fsi.com>

        * dwarf2dbg.c (dwarf2_finish): Add SEC_DEBUGGING to section flags.

2004-04-28  Chris Demetriou  <cgd@broadcom.com>

        * config/tc-mips.c (HAVE_32BIT_ADDRESSES, append_insn, macro_build)
        (load_address, macro, mips_ip, md_parse_option)
        (mips_force_relocation, mips_validate_fix, md_apply_fix3)
        (s_change_sec, pic_need_relax, tc_gen_reloc): Remove all
        embedded-PIC handling, and update comments.
        (SWITCH_TABLE): Remove.
        * config/tc-mips.h (DIFF_EXPR_OK): Delete.
        (enum mips_pic_level): Remove EMBEDDED_PIC.
        (EXTERN_FORCE_RELOC): Remove embedded-PIC handling.
        (TC_FORCE_RELOCATION): Update comment.
        * ecoff.c (ecoff_build_lineno): Add comment about some code that
        might be safe to remove now that MIPS embedded-PIC is gone.

2004-04-28  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>

        * config/obj-som.c (obj_som_init_stab_section): Add new arguments in
        call to obj_set_subsection_attributes.
        (obj_som_init_stab_section): Likewise.
        * config/tc-hppa.c (default_subspace_dict): Add comdat field.
        (pa_def_subspaces): Provide comdat default.
        (pa_subspace): Handle new "comdat" parameter.  Set SEC_LINK_ONCE and
        not SEC_IS_COMMON if section is comdat, common or dup_common.  Update
        calls to create_new_subspace and update_subspace to pass comdat flag.
        (create_new_subspace, update_subspace): Add new comdat argument.  Use
        it in calls to obj_set_subsection_attributes.
        * doc/c-hppa.texi (.subspa, .nsubspa): Document new comdat parameter
        and use of comdat, common and dup_comm parameters.

2004-04-26  H.J. Lu  <hongjiu.lu@intel.com>

        * config/obj-elf.c (obj_elf_change_section): Check if the old
        group name is NULL before comparison.

2004-04-23  Chris Demetriou  <cgd@broadcom.com>

        * config/tc-mips.h (mips_dwarf2_addr_size): Prototype.

2004-04-23  Thiemo Seufer  <seufer@csv.ica.uni-stuttgart.de>

        * config/tc-mips.c (s_mipsset): Set default CPU type for .set mipsN.

2004-04-23  Chris Demetriou  <cgd@broadcom.com>

        * config/tc-mips.c (md_longopts): Remove -membedded-pic option.
        (OPTION_MEMBEDDED_PIC): Remove.
        (OPTION_TRAP, OPTION_BREAK, OPTION_EB, OPTION_EL)
        (OPTION_FP32, OPTION_GP32, OPTION_CONSTRUCT_FLOATS)
        (OPTION_NO_CONSTRUCT_FLOATS, OPTIONS_FP64, OPTION_GP64)
        (OPTION_RELAX_BRANCH, OPTION_NO_RELAX_BRANCH)
        (OPTION_ELF_BASE): Renumber.
        (md_parse_option): Remove OPTION_MEMBEDDED_PIC handling.
        (md_show_usage): Remove mention of -membedded-pic.
        * doc/as.texinfo: Remove mention of -membedded-pic.

2004-04-23  Thiemo Seufer  <seufer@csv.ica.uni-stuttgart.de>

        * config/tc-mips.h (USE_GLOBAL_POINTER_OPT): Remove.
        * config/tc-mips.c (RDATA_SECTION_NAME, mips_target_format): Remove
        a.out support.
        (md_begin, mips_ip, md_parse_option, s_change_sec, s_option,
        s_abicalls, nopic_need_relax, tc_gen_reloc): Remove uses of
        USE_GLOBAL_POINTER_OPT.

2004-04-22  Thiemo Seufer  <seufer@csv.ica.uni-stuttgart.de>

        * config/tc-mips.c (macro): One more use of load_delay_nop.

2004-04-22  Atsushi Nemoto  <anemo@mba.ocn.ne.jp>

        * config/tc-mips.c (load_delay_nop): New function.
        (load_address, macro): Use load_delay_nop() to build a nop
        which can be omitted with gpr_interlocks.

2004-04-22  Thiemo Seufer  <seufer@csv.ica.uni-stuttgart.de>

        * config/tc-mips.c (hilo_interlocks, gpr_interlocks,
        cop_interlocks): Remove superfluous CPU entries.

2004-04-22  Paul Brook  <paul@codesourcery.com>

        * config/tc-arm.c (mav_parse_offset): Value must be multiple of 4.

2004-04-22  Peter Barada <peter@the-baradas.com>

        * NEWS: Added support for EMAC instructions and MAC/EMAC
        Motorola syntax.
        * config/m68k-parse.h: Add ACC[123], ACCEXT{01,23}, MAC/EMAC
        scale factor tokens, trailing_ampersand to mark mask addressing
        for MAC/EMAC instructions.
        * config/m68k-parse.y: Add options_ampersand clause, '<<',
        '>>'.
        (yylex): Handle '>', '<', and '&' following '+'.
        * config/tc-m68k.c: Set mcfmac/mcfemac on appropriate ColdFire
        architectures in archs[].
        (m68k-ip): Add '4', 'e', 'g', 'i', cases to handle mask addressing
        for MAC/EMAC instructions, ACC[0123], ACCEXT{01,23}, and '<<'/'>>'
        respectively.
        (m68k_ip): Handle trailing '&' on MAC/EMAC insns.
        (install_operand): Fix 'n' case, Add 'F', 'f', 'G', 'H', 'I', ']'
        cases.
        Add EMAC operands to init_table[].

2004-04-22  Bruno De Bus <bdebus@elis.ugent.be>

        * config/tc-arm.h (enum mstate): Move here, add MAP_UNDEFINED
        state.
        (TC_SEGMENT_INFO_TYPE): Define to enum mstate.
        * config/tc-arm.c (enum mstate): Delete from here.
        (mapping_state): Remove the static mapstate variable and instead
        store the state in the segment.  This allows a per-section mapping
        state.  Handle and ignore MAP_UNDEFINED states.
        (arm_elf_change_section): Get the current mapping state from the
        new section.
        (s_ltorg): Set the mapping state to MAP_DATA.
        (arm_cleanup): Use arm_elf_change_section to get the mapping state
        for each pool as it is emitted.

2004-04-22  Nick Clifton  <nickc@redhat.com>

        * config/tc-arm.h: Formatting tidy ups.

2004-04-20  Chris Demetriou  <cgd@broadcom.com>

        * NEWS: Note that MIPS -membedded-pic option is deprecated.

2004-04-20  DJ Delorie  <dj@redhat.com>

        * config/tc-i386.h [TE_PE] (TC_CONS_FIX_NEW): Define.
        * config/tc-i386.c (md_pseudo_table) [TE_PE]: Add "secrel32".
        [TE_PE] (O_secrel): Define.
        [TE_PE] (x86_pe_cons_fix_new): New.
        [TE_PE] (pe_directive_secrel): Likewise.
        (tc_gen_reloc) [TE_PE]: Support BFD_RELOC_32_SECREL.

2004-04-19  Eric Christopher  <echristo@redhat.com>

        * config/tc-mips.c (mips_dwarf2_addr_size): Revert part
        of previous patch for fix in gcc.

2004-04-19  Jakub Jelinek  <jakub@redhat.com>

        * config/tc-xtensa.c (xg_assembler_literal): Fix a typo.

2004-04-19  Nathan Sidwell  <nathan@codesourcery.com>

        * read.c (do_align): Call md_flush_pending_output, if defined.

2004-04-16  Alan Modra  <amodra@bigpond.net.au>

        * expr.c (operand): Correct checks for ++ and --.

2004-04-14  H.J. Lu  <hongjiu.lu@intel.com>

        * config/tc-generic.c: Add some comments.

2004-04-14  Richard Sandiford  <rsandifo@redhat.com>

        * doc/c-mips.texi (-m{no-,}fix-vr4120): Renamed from
        -{no-}mfix-vr4122-bugs.
        * config/tc-mips.c (mips_fix_vr4120): Renamed from mips_fix_4122_bugs.
        (append_insn, mips_emit_delays): Update accordingly.
        (OPTION_FIX_VR4120, OPTION_NO_FIX_VR4120): Renamed from *VR4122.
        (md_longopts): Change -{no-,}mfix-vr4122-bugs to -m{no-,}fix-vr4120.
        (md_parse_option): Update after above changes.
        (md_show_usage): Add -mfix-vr4120.

2004-04-13  Bob Wilson  <bob.wilson@acm.org>

        * doc/as.texinfo (Sub-Sections): Conditionalize COFF-specific use
        of .section directive; add a reference to the ELF .subsection
        directive.

2004-04-13  Kazuhiro Inaoka  <inaoka.kazuhiro@renesas.com>

        * config/tc-m32r.c (md_assemble): Fixed infinite loop bug
        in parallel.

2004-04-11  Thiemo Seufer  <seufer@csv.ica.uni-stuttgart.de>

        * Makefile.am: Remove mips from aout targets.
        * Makefile.in: Regenerate.
        * configure.in: Remove mips-dec-bsd* target.
        * configure: Regenerate.

2004-04-07  Alan Modra  <amodra@bigpond.net.au>

        PR 96
        * config/tc-ppc.c (ppc_elf_suffix): Add valid32 and valid64 fields
        to struct map_bfd.  Adjust MAP macro, and define MAP32, MAP64.
        Update "mapping".  Restrict some @ modifiers to 32 bit.

2004-04-01  Asgari Jinia  <asgarij@kpitcummins.com>
            Dhananjay Deshpande <dhananjayd@kpitcummins.com>

        * config/tc-sh.c (dont_adjust_reloc_32): New variable.
        (sh_fix_adjustable): Avoid adjusting BFD_RELOC_32 when
        dont_adjust_reloc_32 is set.
        (md_longopts): Add option -renesas.
        (md_parse_option, md_show_usage): Likewise.
        * doc/c-sh.texi: Likewise.

2004-04-01  Dave Korn  <dk@artimi.com>

        * config/tc-dlx.c (md_assemble): set fx_no_overflow flag for
        hi16 and lo16 fixS structs.
        (md_assemble): generate bit_fixS for RELOC_DLX_LO16 in
        exactly the same way as for RELOC_DLX_REL16.
        (machine_ip): properly respect LO flag in the_insn and
        output RELOC_DLX_LO16 rather than RELOC_DLX_16.
        (md_apply_fix3): apply RELOC_DLX_LO16.

2004-03-30  Stan Shebs  <shebs@apple.com>

        Remove long-obsolete MPW support.
        * mpw-config.in, mpw-make.sed, mac-as.r: Remove files.
        * configure.in: Remove mention of ppc-*-mpw* config.
        * configure.in: Likewise.

2004-03-30  Nick Clifton  <nickc@redhat.com>

        * config/tc-arm.c (meabi_flags): Make its use conditional upon
        OBJ_ELF being defined.

2004-03-27  Alan Modra  <amodra@bigpond.net.au>

        * config/obj-aout.c (obj_aout_type): Remove #ifdef BFD_ASSEMBLER code.

2004-03-23  Paul Brook  <paul@codesourcery.com>

        * config/tc-arm.c (meabi_flags): New variable.
        (arm_parse_eabi): New function.
        (md_begin): Set flags for EABI v3.
        (arm_eabis): Add.
        (arm_long_opts): Add meabi.
        * doc/as.texinfo <ARM>: Document -meabi.
        * doc/c-arm.texi: Ditto.

2004-03-22  Bob Wilson  <bob.wilson@acm.org>

        * config/tc-xtensa.c (xtensa_post_relax_hook): Create literal
        tables even when use_literal_section flag is not set.

2004-03-22  Alan Modra  <amodra@bigpond.net.au>

        * config/tc-sh.c: Remove trailing whitespace.

2004-03-22  Hans-Peter Nilsson  <hp@axis.com>

        * doc/c-cris.texi (CRIS-Opts): Document --no-mul-bug-abort,
        --mul-bug-abort and the default behavior.
        * config/tc-cris.c (cris_insn_kind): New member CRIS_INSN_MUL.
        (err_for_dangerous_mul_placement): New variable.
        (STATE_MUL, OPTION_MULBUG_ABORT_ON, OPTION_MULBUG_ABORT_OFF): New
        macros.
        (md_cris_relax_table): Have placeholder for STATE_MUL.
        (md_longopts): New options --mul-bug-abort and --no-mul-bug-abort.
        (cris_relax_frag) <case ENCODE_RELAX (STATE_MUL, STATE_BYTE)>: New
        case doing nothing.
        (md_estimate_size_before_relax) <case ENCODE_RELAX (STATE_MUL,
        STATE_BYTE)>: Ditto.
        (md_convert_frag) <ENCODE_RELAX (STATE_MUL, STATE_BYTE)>: Check
        alignment and position of this frag, emit error message if
        suspicious.
        (md_assemble): For a multiply insn and when checking it,
        transform the current frag into a special frag for that purpose.
        (md_parse_option) <case OPTION_MULBUG_ABORT_OFF, case
        OPTION_MULBUG_ABORT_ON>: Handle new options.

2004-03-19  Bob Wilson  <bob.wilson@acm.org>

        * config/tc-xtensa.c (mark_literal_frags): New function.
        (xtensa_move_literals): Call mark_literal_frags for all literal
        segments, including init and fini literal segments.
        (xtensa_post_relax_hook): Swap use of xt_insn_sec and xt_literal_sec.

2004-03-19  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>

        * tc-hppa.c (cons_fix_new_hppa): Check for PC relative base type.
        (pa_comm): Set BSF_OBJECT in symbol flags.

2004-03-19  Alan Modra  <amodra@bigpond.net.au>

        * Makefile.am: Run "make dep-am".
        * Makefile.in: Regenerate.
        * doc/Makefile.in: Regenerate.
        * config.in: Regenerate.
        * po/gas.pot: Regenerate.

2004-03-18  Nathan Sidwell  <nathan@codesourcery.com>

        * read.c (read_a_source_file): Use demand_empty_rest_of_line.
        (demand_empty_rest_of_line): Issue an error here.
        (ignore_rest_of_line): Silently skip to end.
        (demand_copy_string): Issue an error, not warning.
        (equals): Likewise.
        * config/obj-elf.c (obj_elf_section_name): Likewise.
        (obj_elf_section): Likewise.
        * config/tc-arc.c (arc_extoper): Remove bogus NULL checks.
        (arc_extinst): Likewise.
        * config/tc-ia64.c (dot_saveb): Use demand_empty_rest_of_line.
        (dot_spill): Likewise.
        (dot_unwabi): Likewise.
        (dot_prologue): Likewise.

        * expr.c (operand): Reject ++ and --.
        (operator): Likewise.

2004-03-17  Kaz Kojima  <kkojima@rr.iij4u.or.jp>

        * config/tc-sh.c: Include dw2gencfi.h.
        (sh_cfi_frame_initial_instructions): New function.
        (sh_regname_to_dw2regnum): Likewise.
        * config/tc-sh.h (DWARF2_LINE_MIN_INSN_LENGTH): Move to the end of
        file.
        (TARGET_USE_CFIPOP): Define.
        (tc_cfi_frame_initial_instructions): Likewise.
        (tc_regname_to_dw2regnum): Likewise.
        (DWARF2_DEFAULT_RETURN_COLUMN, DWARF2_CIE_DATA_ALIGNMENT): Likewise.
        * Makefile.am: Update dependencies.
        * Makefile.in: Regenerate.

2004-03-17  Ralf Corsepius <corsepiu@faw.uni-ulm.de>

        * configure.in: Switch sh-*-rtems* to ELF.  Add sh-*-rtemscoff*.
        * configure: Regenerate.

2004-03-12  Bob Wilson  <bob.wilson@acm.org>

        * read.c (s_leb128): Call md_flush_pending_output.

2004-03-12  Michal Ludvig  <mludvig@suse.cz>

        * config/tc-i386.c (output_insn): Handle PadLock instructions.
        * config/tc-i386.h (CpuPadLock): New define.
        (CpuUnknownFlags): Added CpuPadLock.

2004-03-07  Andreas Schwab  <schwab@suse.de>

        * doc/c-hppa.texi (HPPA Directives): Fix typo.

2004-03-07  Richard Henderson  <rth@redhat.com>

        * dw2gencfi.c (output_cie): Align length to 4 byte boundary.
        (cfi_finish): Likewise for fde.

2004-03-05  H.J. Lu  <hongjiu.lu@intel.com>

        * config/tc-ia64.c (md_assemble): Properly handle NULL
        align_frag.
        (ia64_handle_align): Don't abort if failed to add a stop bit.

2004-03-04  H.J. Lu  <hongjiu.lu@intel.com>

        * Makefile.in: Regenerated.
        * aclocal.m4: Likewise.
        * configure: Likewise.
        * doc/Makefile.in: Likewise.

2004-03-03  H.J. Lu  <hongjiu.lu@intel.com>

        * config/tc-ia64.c (dot_align): New.
        (ia64_do_align): Make it static.
        (md_pseudo_table): Use "dot_align" for "align".
        (ia64_md_do_align): Don't set align_frag here.
        (ia64_handle_align): Add a stop bit to the previous bundle if
        needed.

        * config/tc-ia64.h (ia64_do_align): Removed.

2003-03-03  Andrew Stubbs  <andrew.stubbs@superh.com>

        * config/tc-sh.c (md_parse_option): Add -isa=sh4-nofpu and
        -isa=sh4-nommu-nofpu options. Adjust help messages accordingly.
        (sh_elf_final_processing): Output BFD type sh4_nofpu if that is
        the most general type or the user specifically requested it.
        (md_assemble): Add a new error message for when an instruction
        is understood, but is not allowed due to an -isa option.

2004-03-02  H.J. Lu  <hongjiu.lu@intel.com>

        * config/tc-ia64.c (align_frag): New.
        (md_assemble): Set the tc_frag_data field in align_frag for
        IA64_OPCODE_FIRST instructions.
        (ia64_md_do_align): Set align_frag.
        (ia64_handle_align): Add a stop bit if needed.

        * config/tc-ia64.h (TC_FRAG_TYPE): New.
        (TC_FRAG_INIT): New.

2004-03-01  Richard Sandiford  <rsandifo@redhat.com>

        * config/tc-frv.c (fr400_audio): New variable.
        (md_parse_option, md_show_usage): Add -mcpu=fr405 and -mcpu=fr450.
        (md_parse_option): Set fr400_audio for -mcpu=fr400 and -mcpu=fr405.
        (target_implements_insn_p): New function.
        (md_assemble): Report an error if the processor doesn't implement
        the instruction.

2004-02-27  Kazuhiro Inaoka  <inaoka.kazuhiro@renesas.com>

        * config/tc-m32r.c (md_longopts): Added -no-bitinst option.
        (md_parse_option): Ditto.
        (OPTION_NO_SPECIAL_M32R): Added.
        (md_show_usage): Document it.
        (enable_speial_m32r): Changed a default value from 0 to 1.
        * doc/c-m32r.texi: Document the -no-bitinst option.

2004-02-27  Nick Clifton  <nickc@redhat.com>

        * config/tc-sh.c (get_operand): Revert previous delta.
        (tc_gen_reloc): Check for an unknown reloc type before processing
        the addend.

2004-02-27  Hannes Reinecke  <hare@suse.de>

        * config/tc-s390.c (s390_insn): Correct range check for opcode in
        .insn pseudo operation.

2004-02-27  Anil Paranjpe  <anilp1@kpitcummins.com>

        * config/tc-sh.c (get_operand):  In case of #Imm, check has been
        added for wrong syntax.

2004-02-26  Eric Christopher  <echristo@redhat.com>

        * config/tc-mips.c (mips_dwarf2_addr_size): New.
        * config/tc-mips.h (DWARF2_ADDR_SIZE): Use.

2004-02-26  Andrew Stubbs <andrew.stubbs@superh.com>

        * config/tc-sh.c (build_Mytes): Add REG_N_D and REG_N_B01
        nibble types to assembler.

2004-02-25  Fred Fish  <fnf@redhat.com>

        * config/tc-iq2000.c: Add missing \n\ in multiline string literal.

2004-02-20  James E Wilson  <wilson@specifixinc.com>

        * config/tc-ia64.c (slot_index): New arg before_relax.  Use instead of
        finalize_syms.
        (fixup_unw_records): New arg before_relax.  Pass to slot_index.
        (ia64_estimate_size_before_relax): New.
        (ia64_convert_frag): Pass 0 to fixup_unw_records.  Add comment.
        (generate_unwind_image): Pass 1 to fixup_unw_records.
        * config/tc-ia64.h (ia64_estimate_size_before_relax): Declare.
        (md_estimate_size_before_relax): Call ia64_estimate_size_before_relax.

2004-02-19  Jakub Jelinek  <jakub@redhat.com>

        * stabs.c (generate_asm_file): Avoid warning about use of
        uninitialized variable.

2004-02-18  David Mosberger  <davidm@hpl.hp.com>

        * config/tc-ia64.c (ia64_flush_insns): In addition to prologue,
        body, and endp, allow unwind records which do not have a "t"
        (time/instruction) field.

2004-02-17  Petko Manolov  <petkan@nucleusys.com>

        * config/tc-arm.c (do_mav_dspsc_1): Correct offset of CRn.
        (do_mav_dspsc_2): Likewise.
        Fix accumulator registers move opcodes.

2004-02-13  Hannes Reinecke  <hare@suse.de>
            Jakub Jelinek  <jakub@redhat.com>

        * dwarf2dbg.c (get_filenum): Do not read beyond allocated memory.

2004-02-10  Steve Ellcey  <sje@cup.hp.com>

        * config/tc-ia64.h (ia64_frob_symbol): New declaration.
        (tc_frob_symbol): New macro definition.
        * config/tc-ia64.c (ia64_frob_symbol): New routine.

2004-02-09  Daniel Jacobowitz  <drow@mvista.com>

        * config/tc-arm.c (md_begin): Mark .note.gnu.arm.ident as
        read-only.

2004-02-09  Nathan Sidwell  <nathan@codesourcery.com>

        * read.h (IGNORE_OPCODE_CASE): Do not define. Replace with ...
        (TC_CASE_SENSITIVE): ... this.
        * read.c: Replace IGNORE_OPCODE_CASE with TC_CASE_SENSITIVE.
        * doc/internals.texi (TC_CASE_SENSITIVE): Document.

2004-02-06  James E Wilson  <wilson@specifixinc.com>

        * config/tc-ia64.c (dot_endp): Delete call to output_endp.
        (generate_unwind_image): Re-add it here.

2004-02-06  Nathan Sidwell  <nathan@codesourcery.com>

        * dwarf2dbg.c (DWARF2_ADDR_SIZE): Remove trailing ';'
        * read.h (SKIP_WHITESPACE): Turn into an expression.
        * read.c (read_a_source_file): A pseudo is removed by having a
        NULL handler.

2004-02-05  James E Wilson  <wilson@specifixinc.com>

        * config/tc-ia64.c (output_endp): New.
        (count_bits): Delete.
        (ia64_flush_insns, process_one_record, optimize_unw_records): Handle
        endp unwind records.
        (fixup_unw_records): Handle endp unwind records.  Delete code for
        shortening prologue regions not followed by a body record.
        (dot_endp): Call add_unwind_entry to emit endp unwind record.
        * config/tc-ia64.h (unw_record_type): Add endp.

2004-02-03  James E Wilson  <wilson@specifixinc.com>

        * config/tc-ia64.c (ia64_convert_frag): Call md_number_to_chars to
        fill padding bytes with zeroes.
        (emit_one_bundle): New locals last_ptr, end_ptr.  Rewrite code that
        sets unwind_record slot_number and slot_frag fields.

2004-02-02  Maciej W. Rozycki  <macro@ds2.pg.gda.pl>

        * config/tc-mips.c (add_got_offset_hilo): New function.
        (macro): Use load_register() and add_got_offset_hilo() to load
        constants instead of hardcoding code sequences throughout.

2004-01-28  H.J. Lu  <hongjiu.lu@intel.com>

        * config/tc-ia64.c (emit_one_bundle): Add proper indentation.

2004-01-26  Bernardo Innocenti  <bernie@develer.com>

        * config/tc-m68k.h (EXTERN_FORCE_RELOC): Handle m68k-uclinux specially,
        like m68k-elf.
        * config/tc-m68k.c (RELAXABLE_SYMBOL): Use EXTERN_FORCE_RELOC instead
        of hard-coded test for TARGET_OS=elf.

2004-01-24  Chris Demetriou  <cgd@broadcom.com>

        * config/tc-mips.c (hilo_interlocks): Change definition
        so that MIPS32, MIPS64 and later ISAs are included, along with
        the already-included machines.  Update comments.

2004-01-23  Daniel Jacobowitz  <drow@mvista.com>

        * config/tc-arm.c (tc_gen_reloc): Improve error message for
        undefined local labels.

2004-01-23  Richard Sandiford  <rsandifo@redhat.com>

        * config/tc-mips.c (load_address, macro): Update comments about
        NewABI GP relaxation.

2004-01-23  Richard Sandiford  <rsandifo@redhat.com>

        * config/tc-mips.c (macro_build): Remove place and counter arguments.
        (mips_build_lui, macro_build_ldst_constoffset): Likewise.
        (mips16_macro_build, macro_build_jalr): Remove counter argument.
        (set_at, load_register, load_address, move_register): Likewise.
        (load_got_offset, add_got_offset): Likewise.
        Update all calls and tidy accordingly.

2004-01-23  Richard Sandiford  <rsandifo@redhat.com>

        * config/tc-mips.c (RELAX_ENCODE): Remove WARN argument.
        (RELAX_FIRST, RELAX_SECOND): Turn into 8-bit quantities.
        (RELAX_USE_SECOND): Bump to 0x10000.
        (RELAX_SECOND_LONGER, RELAX_NOMACRO, RELAX_DELAY_SLOT): New flags.
        (mips_macro_warning): New variable.
        (md_assemble): Wrap macro expansion in macro_start() and macro_end().
        (s_cpload, s_cpsetup, s_cprestore, s_cpreturn): Likewise.
        (relax_close_frag): Set mips_macro_warning.first_frag.  Adjust use
        of RELAX_ENCODE.
        (append_insn): Update mips_macro_warning.sizes.
        (macro_start, macro_warning, macro_end): New functions.
        (macro_build): Don't emit warnings here.
        (macro_build_lui, md_estimate_size_before_relax): ...or here.
        (md_convert_frag): Check for cases where one macro alternative
        needs a warning and the other doesn't.  Emit a warning if the
        longer sequence was chosen.

2004-01-23  Richard Sandiford  <rsandifo@redhat.com>

        * config/tc-mips.h (tc_frag_data_type, TC_FRAG_TYPE): Remove.
        * config/tc-mips.c (RELAX_ENCODE): Take three arguments: the size of
        the first sequence, the size of the second sequence, and a flag
        that says whether we should warn.
        (RELAX_OLD, RELAX_NEW, RELAX_RELOC[123]): Delete.
        (RELAX_FIRST, RELAX_SECOND): New.
        (mips_relax): New variable.
        (relax_close_frag, relax_start, relax_switch, relax_end): New fns.
        (append_insn): Remove "place" argument.  Use mips_relax.sequence
        rather than "place" to check whether we're expanding the second
        alternative of a relaxable macro.  Remove redundant check for
        branch relaxation.  If generating a normal insn, and there
        is not enough room in the current frag, call relax_close_frag()
        to close it.  Update mips_relax.sizes[].  Emit fixups for the
        second version of a relaxable macro.  Record the first relaxable
        fixup in mips_relax.  Remove tc_gen_reloc workaround.
        (macro_build): Remove all uses of "place".  Use mips_relax.sequence
        in the same way as in append_insn.
        (mips16_macro_build): Remove "place" argument.
        (macro_build_lui): As for macro_build.  Don't drop the add_symbol
        when generating the second version of a relaxable macro.
        (load_got_offset, add_got_offset): New functions.
        (load_address, macro): Use new relaxation machinery.  Remove
        tc_gen_reloc workarounds.
        (md_estimate_size_before_relax): Set RELAX_USE_SECOND if the second
        version of a relaxable macro is needed.  Return -RELAX_SECOND if the
        first version is needed.
        (tc_gen_reloc): Remove relaxation handling.
        (md_convert_frag): Go through the fixups for a relaxable macro and
        mark those that belong to the unneeded alternative as done.  If the
        second alternative is needed, adjust the fixup addresses to account
        for the deleted first alternative.

2004-01-23  Richard Sandiford  <rsandifo@redhat.com>

        * frags.h (frag_room): Declare.
        * frags.c (frag_room): New function.
        * doc/internals.texi: Document it.

2004-01-22  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>

        * config/tc-mips.c (append_insn): Don't do r3900 interlock
        optimization for -mtune=r3900, as this will break on other CPUs.

2004-01-11  Tom Rix   <tcrix@worldnet.att.net>

        * config/tc-m68hc11.c (build_indexed_byte): movb and movw cannot
        be relaxed, use fixup.
        (md_apply_fix3): Use 5 bit reloc from movb and movw fixup.

2004-01-19  Jakub Jelinek  <jakub@redhat.com>

        * config/tc-sparc.c (sparc_ip): Disallow %f32-%f63 for single
        precision operands.

2004-01-14  Maciej W. Rozycki  <macro@ds2.pg.gda.pl>

        * config/tc-mips.c (append_insn): Properly detect variant frags
        that preclude swapping of relaxed branches.  Correctly swap
        instructions between frags when dealing with relaxed branches.

2004-01-14  Maciej W. Rozycki  <macro@ds2.pg.gda.pl>

        * acinclude.m4: Quote names of macros to be defined by AC_DEFUN
        throughout.
        * aclocal.m4: Regenerate.
        * configure: Regenerate.

2004-01-12  Anil Paranjpe  <anilp1@KPITCummins.com>

        * config/tc-h8300.c (build_bytes): Apply relaxation to bit
        manipulation insns.

2004-01-12  Richard Sandiford  <rsandifo@redhat.com>

        * config/tc-mips.c (macro_build_jalr): When adding an R_MIPS_JALR
        reloc, reserve space for the delay slot as well as the jalr itself.

2004-01-09  Paul Brook  <paul@codesourcery.com>

        * config/tc-arm.c (do_vfp_reg2_from_sp2): Rename from do_vfp_sp_reg2.
        (do_vfp_sp2_from_reg2): New function.
        (insns): Use them.
        (do_vfp_dp_from_reg2): Check return values properly.

2004-01-08  Ian Lance Taylor  <ian@wasabisystems.com>

        * config/tc-mips.c (warn_nops): Remove static variable.
        (macro): Remove test of warn_nops.
        (md_shortops): Remove 'n'.
        (md_parse_option): Remove 'n' case.
        (md_show_usage): Remove -n.
        * doc/as.texinfo (Overview): Remove MIPS -n option.
        * doc/c-mips.texi (MIPS Opts): Remove mention -n.
        * NEWS: Mention removal of MIPS -n option.

        * config/tc-mips.c (ISA_HAS_COPROC_DELAYS): Remove.
        (cop_interlocks): Check ISA level.
        (cop_mem_interlocks): Define.
        (reg_needs_delay): Check cop_interlocks rather than
        ISA_HAS_COPROC_DELAYS.
        (append_insn): Likewise.  Use cop_mem_interlocks rather than
        directly checking mips_opts.isa.
        (mips_emit_delays): Likewise.

2004-01-07  H.J. Lu  <hongjiu.lu@intel.com>

        * config/tc-ia64.c (unwind): Move next_slot_number and
        next_slot_frag to ...
        (unw_rec_list): Here.
        (free_list_records): Removed.
        (output_unw_records): Likewise.
        (generate_unwind_image): Make it void.
        (alloc_record): Initialize next_slot_number and next_slot_frag.
        (slot_index): Take .org, .space and .align into account.
        (fixup_unw_records): Don't set slot_number to 0. Use
        list->next_slot_number and list->next_slot_frag instead of
        unwind.next_slot_number and unwind.next_slot_frag.
        (ia64_convert_frag): New.
        (generate_unwind_image): Generate a rs_machine_dependent frag
        for unwind record.
        (emit_one_bundle): Use list->next_slot_number and
        list->next_slot_frag instead of unwind.next_slot_number and
        unwind.next_slot_frag.

        * config/tc-ia64.h (md_convert_frag): Defined as
        ia64_convert_frag.
        (md_estimate_size_before_relax): Defined as (f)->fr_var.

2004-01-06  Alexandre Oliva  <aoliva@redhat.com>

        2003-12-19  Alexandre Oliva  <aoliva@redhat.com>
        * config/tc-frv.h (md_apply_fix3): Don't define.
        * config/tc-frv.c (md_apply_fix3): New.  Shift/truncate %hi/%lo
        operands.
        * config/tc-frv.h (TC_FORCE_RELOCATION_SUB_LOCAL): Define.
        2003-10-07  Alexandre Oliva  <aoliva@redhat.com>
        * config/tc-frv.c (line_separator_chars): Add `!'.
        2003-09-19  Alexandre Oliva  <aoliva@redhat.com>
        * config/tc-frv.c (md_assemble): Clear insn upfront.
        2003-09-18  Alexandre Oliva  <aoliva@redhat.com>
        * config/tc-frv.c (OPTION_FDPIC): New macro.
        (md_longopts): Add mfdpic.
        (md_parse_option): Handle it.
        2003-08-04  Alexandre Oliva  <aoliva@redhat.com>
        * config/tc-frv.c (md_cgen_lookup_reloc) <FRV_OPERAND_D12,
        FRV_OPERAND_S12>: Use reloc type encoded in fix-up.
        (frv_pic_ptr): Parse funcdesc.

2004-01-05  Maciej W. Rozycki  <macro@ds2.pg.gda.pl>

        * doc/as.texinfo: Let texi2pod parse asconfig.texi and
        gasver.texi.  Remove duplicate symbol definitions for texi2pod.

2004-01-05  Maciej W. Rozycki  <macro@ds2.pg.gda.pl>

        * Makefile.am (Makefile): Move the dependency on
        $(BFDDIR)/configure.in to...
        (CONFIG_STATUS_DEPENDENCIES): ... here.
        (AUTOMAKE_OPTIONS): Require automake 1.8.
        * Makefile.in: Regenerate.
        * doc/Makefile.am (BASEDIR, BFDDIR): Define.
        (CONFIG_STATUS_DEPENDENCIES): Add a dependency on
        $(BFDDIR)/configure.in here as well.
        * doc/Makefile.in: Regenerate.

2004-01-05  Maciej W. Rozycki  <macro@ds2.pg.gda.pl>

        * Makefile.am (install, install-info, RECURSIVE_TARGETS): Remove.
        * Makefile.in: Regenerate.
        * aclocal.m4: Regenerate.
        * doc/Makefile.am (install, install-info): Remove.
        (install-data-local): A new hook for install-info.
        (AUTOMAKE_OPTIONS): Require automake 1.8.
        * doc/Makefile.in: Regenerate.

2004-01-02  Nutan Singh <nutan@kpitcummins.com>

        * doc/c-sh.texi: Update description about floating point behavior
        of SH family.

2004-01-02  Bernardo Innocenti  <bernie@develer.com>

        * configure.in: Add m68k-uClinux target.
        * configure: Regenerate.

For older changes see ChangeLog-0203
\f
Local Variables:
mode: change-log
left-margin: 8
fill-column: 74
version-control: never
End: