gas/ChangeLog

   1 2011-06-29  Richard Sandiford  <rdsandiford@googlemail.com>
   2
   3         * config/tc-mips.c (find_altered_mips16_opcode): New function.
   4         (append_insn): Use it.
   5
   6 2011-06-29  Richard Sandiford  <rdsandiford@googlemail.com>
   7
   8         * config/tc-mips.c (insn_uses_reg): Delete.
   9         (gpr_read_mask, gpr_write_mask): New functions.
  10         (fpr_read_mask, fpr_write_mask): Likewise.
  11         (insns_between, nops_for_vr4130, append_insn): Use them.
  12
  13 2011-06-29  Richard Sandiford  <rdsandiford@googlemail.com>
  14
  15         * config/tc-mips.c (md_mips_end): Call mips_emit_delays.
  16
  17 2011-06-29  Dave Martin  <dave.martin@linaro.org>
  18
  19         PR gas/12931
  20         * config/tc-arm.c (mapping_state): When changing to ARM or THUMB
  21         state set the minimum required alignment of the section.
  22
  23 2011-06-29  Tristan Gingold  <gingold@adacore.com>
  24
  25         * config/tc-i386.c (i386_mach): Convert to ISO-C.
  26         (md_begin, pe_directive_secrel, md_estimate_size_before_relax): Ditto.
  27         (md_convert_frag, md_apply_fix, md_undefined_symbol): Ditto.
  28         (md_section_align, tc_gen_reloc): Ditto.
  29
  30 2011-06-28  Tristan Gingold  <gingold@adacore.com>
  31
  32         * config/tc-alpha.c (s_alpha_pdesc): Fix indentation. Do not
  33         generate dummy fix.
  34
  35 2011-06-28  Tristan Gingold  <gingold@adacore.com>
  36
  37         * config/tc-alpha.c (load_expression): Use alloca instead of xmalloc.
  38         (emit_jsrjmp): Ditto.
  39         (tc_gen_reloc): Ditto.
  40
  41 2011-06-28  Tristan Gingold  <gingold@adacore.com>
  42
  43         * config/tc-alpha.c (alpha_evax_proc_hash): Remove.
  44         (alpha_evax_proc_data): New variable.
  45         (s_alpha_ent): Prevent nested function.  Remove has_insert call.
  46         (s_alpha_pdesc): Do not call demand_empty_rest_of_line in case of
  47         error.  Do not search in the hash table.  Check if match with .ent.
  48         (s_alpha_name): Remove unused variable.
  49         (md_begin): Remove initialization of alpha_evax_proc_hash.
  50
  51 2011-06-27  Tristan Gingold  <gingold@adacore.com>
  52
  53         * config/tc-alpha.c (add_to_link_pool): Remove basesym parameter.
  54         Locally declare basesym.  Add comments.  Do not set literal_pool_size.
  55         (load_expression): Adjust call to add_to_link_pool.
  56         (s_alpha_pdesc): Define pdesc symbol using dot.
  57         Do not set literal_pool_size.
  58         (s_alpha_end): Use NULL instead of 0.
  59
  60 2011-06-27  Tristan Gingold  <gingold@adacore.com>
  61
  62         * config/obj-evax.c (evax_frob_file_before_adjust): Add comments.
  63         Fix style.
  64         * config/obj-evax.h (struct alpha_linkage_fixups): Remove seg
  65         field.  Add comments.
  66         (obj_symbol_type, object_headers, OBJ_SYMFIELD_TYPE): Remove
  67
  68 2011-06-26  Richard Sandiford  <rdsandiford@googlemail.com>
  69
  70         * config/tc-mips.c (fix_24k_record_store_info): If the previous
  71         instruction was a store, and the next instructions are unknown,
  72         assume the worst.
  73
  74 2011-06-25  Richard Sandiford  <rdsandiford@googlemail.com>
  75
  76         PR gas/12915
  77         * config/tc-mips.c (nops_for_vr4130, nops_for_24k, nops_for_insn)
  78         (nops_for_sequence, nops_for_insn_or_target): Add ignore parameters.
  79         (mips_emit_delays, start_noreorder): Update accordingly.
  80         (append_insn): Likewise.  Revert original fix for this PR
  81         and use the ignore parameter instead.
  82
  83 2011-06-24  Tristan Gingold  <gingold@adacore.com>
  84
  85         PR gas/11625
  86         * config/obj-evax.c (evax_frob_symbol): Use as_bad instead of abort.
  87
  88 2011-06-24  Tristan Gingold  <gingold@adacore.com>
  89
  90         * config/tc-alpha.c (add_to_link_pool): Remove useless offset
  91         variable.  Fix style.
  92
  93 2011-06-23  Richard Sandiford  <rdsandiford@googlemail.com>
  94
  95         PR gas/12915
  96         * config/tc-mips.c (append_insn): Only consider hazards between the
  97         pre-noreorder block and ip.
  98
  99 2011-06-21  Sameera Deshpande  <sameera.deshpande@arm.com>
 100
 101         * config/tc-arm.c (vfp_conv): Add check on range of immediate operand
 102         in vcvt instruction between floating-point and fixed-point.
 103         (operand_parse_code): Add "OP_oI32z".
 104         (parse_operands): OP_oI32z case added.
 105
 106 2011-06-20  H.J. Lu  <hongjiu.lu@intel.com>
 107
 108         * configure.tgt: Revert x32 change.
 109
 110 2011-06-20  Nick Clifton  <nickc@redhat.com>
 111
 112         * doc/Makefile.am: (CPU_DOCS): Add c-xstormy16.texi.
 113         * doc/Makefile.in: Regenerate.
 114         * doc/all.texi: Set XSTORMY16.
 115         * doc/c-xstormy16.texi: New file.
 116
 117 2011-06-19  H.J. Lu  <hongjiu.lu@intel.com>
 118
 119         * configure.tgt: Support x32.
 120
 121 2011-06-15  Nick Clifton  <nickc@redhat.com>
 122
 123         * NEWS: Mention addition of TILEPRO and TIKE-Gx support.
 124
 125 2011-06-14  Tristan Gingold  <gingold@adacore.com>
 126
 127         * config/tc-ppc.h (struct ppc_tc_sy): Complete comment on within.
 128         (tc_new_dot_label): Define.
 129         (ppc_new_dot_label): Declare.
 130         * config/tc-ppc.c (ppc_frob_label): Set within target field.
 131         (ppc_fix_adjustable): Use this field to adjust the reloc.
 132         (ppc_new_dot_label): New function.
 133
 134 2011-06-14  Alan Modra  <amodra@gmail.com>
 135
 136         * po/POTFILES.in: Regenerate.
 137
 138 2011-06-13  Walter Lee  <walt@tilera.com>
 139
 140         * Makefile.am (TARGET_CPU_CFILES): Add config/tc-tilegx.c and
 141         config/tc-tilepro.c.
 142         (TARGET_CPU_HFILES): Add config/tc-tilegx.h and
 143         config/tc-tilepro.h.
 144         * Makefile.in: Regenerate.
 145         * configure.tgt (tilepro-*-*): New.
 146         (tilegx-*-*): Likewise.
 147         * config/tc-tilegx.c: New file.
 148         * config/tc-tilegx.h: Likewise.
 149         * config/tc-tilepro.h: Likewise.
 150         * config/tc-tilepro.c: Likewise.
 151         * doc/Makefile.am (CPU_DOCS): Add c-tilegx.texi and
 152         c-tilepro.texi.
 153         * doc/Makefile.in: Regenerate.
 154         * doc/all.texi (TILEGX): Define.
 155         (TILEPRO): Define.
 156         * doc/as.texinfo: Add Tile-Gx and TILEPro documentation.  Include
 157         c-tilegx.texi and c-tilepro.texi.
 158         * doc/c-tilegx.texi: New.
 159         * doc/c-tilepro.texi: New.
 160
 161 2011-06-13  Nick Clifton  <nickc@redhat.com>
 162
 163         PR gas/12854
 164         * config/tc-arm.c (do_shift): Do not allow shift operations at the
 165         end of a register based shift insn.
 166         (do_t_shift): Likewise.
 167
 168 2011-06-13  Nick Clifton  <nickc@redhat.com>
 169
 170         * config/tc-score.c (s3_my_get_expression): Delete unused local
 171         variable 'seg'.
 172         (s3_do_ldst_insn): Delete unused local variable 'strbak'.
 173         (s3_do16_ldst_insn): Delete unused local variable 'temp'.
 174         (s3_do_macro_bcmp): Zero inst_expand array.
 175         (s3_do_macro_bcmpz): Likewise.
 176         (s3_s_score_end): Delete unused local variable 'dot'.
 177         (s3_gen_reloc): Delete unused local variables 'f', 's', and 'e'.
 178         * config/tc-score7.c (s7_my_get_expression): Delete unused local
 179         variable 'seg'.
 180         (s7_do_ldst_insn): Delete unused local variable 'strbak'.
 181         (s7_b32_relax_to_b16): Delete unused local variables 'r_old' and
 182         'r_new'.
 183         (s7_s_score_end): Delete unused local variable 'dot'.
 184         (s7_relax_frag): Delete unused local variable 'relax_size'.
 185         (s7_gen_reloc): Delete unused local variables 'f', 's', and 'e'.
 186
 187 2011-06-10  H.J. Lu  <hongjiu.lu@intel.com>
 188
 189         AVX Programming Reference (June, 2011)
 190         * config/tc-i386.c (i386_error): Add invalid_vsib_address and
 191         unsupported_vector_index_register.
 192         (cpu_arch): Add .avx2, .bmi2, .lzcnt and .invpcid.
 193         (check_VecOperands): New.
 194         (match_template): Call check_VecOperands.  Handle
 195         invalid_vsib_address and unsupported_vector_index_register.
 196         (build_modrm_byte): Support VecSIB.  Check register-only source
 197         operand when two source operands are swapped.
 198         (i386_index_check): Allow Xmm/Ymm index registers.
 199
 200         * doc/c-i386.texi: Document avx2/.avx2, bmi2/.bmi2, lzcnt/.lzcnt
 201         and invpcid./invpcid.
 202
 203 2011-06-09  Nick Clifton  <nickc@redhat.com>
 204
 205         PR gas/12861
 206         * config/tc-cr16.c (tc_gen_reloc): Remove unused local variable
 207         code.
 208         (check_cinv_options): Remove unused local variables.  Make
 209         function void.
 210         (md_assemble): Remove unused local variable.
 211
 212 2011-06-09  James Greenhalgh  <james.greenhalgh@arm.com>
 213
 214         * config/tc-arm.c (do_ldrd): Warn in unpredictable cases.
 215
 216 2011-06-03  Arnaud Patard  <arnaud.patard@rtp-net.org>
 217
 218         PR gas/12698
 219         * config/tc-arm.c (parse_psr): Set m_profile to false when
 220         assembling for any architecture.
 221
 222 2011-06-02  Jie Zhang jie@codesourcery.com
 223             Nathan Sidwell nathan@codesourcery.com
 224
 225         * config/tc-arm.c (parse_address_main): Handle -0 offsets.
 226         (encode_arm_addr_mode_2): Set default sign of zero here ...
 227         (encode_arm_addr_mode_3): ... and here.
 228         (encode_arm_cp_address): ... and here.
 229         (md_apply_fix): Use default sign of zero here.
 230
 231 2011-06-02  Nick Clifton  <nickc@redhat.com>
 232
 233         * as.c: Fix spelling typo.
 234         * read.c: Likewise.
 235         * config/tc-ppc.c: Likewise.
 236         * po/gas.pit: Regenerate.
 237
 238 2011-05-31  Paul Brook  <paul@codesourcery.com>
 239
 240         * config/tc-arm.c (arm_cpus): Add Cortex-R5.
 241         (arm_extensions): Allow idiv on ARMv7-R.
 242         * doc/c-arm.text: Update idiv extension restrictions.
 243
 244 2011-05-31  Paul Brook  <paul@codesourcery.com>
 245
 246         * config/tc-arm.c (arm_force_relocation): Resolve all pc-relative
 247         loads.
 248
 249 2011-05-31  Paul Brook  <paul@codesourcery.com>
 250
 251         * config/tc-arm.c (do_t_branch): Avoid relaxing branches to constant
 252         addresses.
 253
 254 2011-05-31  Paul Brook  <paul@codesourcery.com>
 255         Nathan Sidwell  <nathan@codesourcery.com>
 256
 257         * config/tc-arm.c (fix_new_arm): Create an absolute symbol for
 258         pc-relative fixes to constants.
 259         * config/tc-arm.h (TC_FORCE_RELOCATATION_ABS): Define.
 260
 261 2011-05-27  Nick Clifton  <nickc@redhat.com>
 262
 263         * config/tc-s390.c (md_begin): Remove unused variable dup_insn.
 264
 265 2011-05-24  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>
 266
 267         * config/tc-s390.c (md_gather_operands): Fix check for floating
 268         register pair operands.
 269
 270 2011-05-24  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>
 271
 272         * config/tc-s390.c (md_gather_operands): Emit an error for odd
 273         numbered registers used as register pair operand.
 274
 275 2011-05-23  Nick Clifton  <nickc@redhat.com>
 276
 277         * config/tc-v850.h (TC_FX_SIZE_SLACK): Define.
 278
 279 2011-05-20  Bernd Schmidt  <bernds@codesourcery.com>
 280
 281         * config/tc-tic6x.c (tic6x_operators): Add "pcr_offset".
 282         (tic6x_parse_name): Handle it.
 283         (tic6x_fix_new_exp): Handle O_pcr_offset.
 284         (tic6x_fix_adjustable): Return 0 for the new relocs.
 285         (md_apply_fix): Handle them.
 286         (tc_gen_reloc): Likewise.
 287         * config/tc-tic6x.h (tic6x_fix_info): Add a fix_subsy member.
 288
 289 2011-05-18  Nick Clifton  <nickc@redhat.com>
 290
 291         PR gas/12754
 292         * config/tc-tic30.c (ordinal_names): Allow translation of the
 293         ordinal names.
 294
 295 2011-05-18  Nick Clifton  <nickc@redhat.com>
 296
 297         * config/tc-arm.c (s_unreq): Reword warning message to make it
 298         easier to translate.
 299         * config/tc-ia64.c (md_show_usage): Add note for translators.
 300         * configure.in (ALL_LINGUAS): Add "fi".
 301         * configure: Regenerate.
 302
 303 2011-05-18  Tristan Gingold  <gingold@adacore.com>
 304
 305         * config/tc-ppc.h (ppc_tc_sy): Reorder fields.
 306         Put size into an union with dw.
 307         (OBJ_COPY_SYMBOL_ATTRIBUTES): Adjust.
 308         (ppc_xcoff_end): Declare.
 309         (md_end): Define.
 310         * config/tc-ppc.c: Add includes for xcoff.
 311         (ppc_dwsect): New function.
 312         (md_pseudo_table): Add dwsect.
 313         (struct dw_subsection): New.
 314         (dw_sections): New.
 315         (ppc_change_debug_section): New function.
 316         (ppc_xcoff_end): Ditto.
 317         (ppc_function): Adjust for ppc_tc_sy.
 318         (ppc_symbol_new_hook): Ditto.
 319         (ppc_frob_symbol): Ditto.
 320         (ppc_frob_section): Do not set vma for debug sections.
 321         (ppc_fix_adjustable): Return true for debug sections.
 322         * config/obj-coff.c: Add includes for xcoff.
 323         (coff_frob_section): Handle dwarf section.
 324
 325 2011-05-17  Nick Clifton  <nickc@redhat.com>
 326
 327         * po/fi.po: New Finnish translation.
 328         * po/fr.po: Updated French translation.
 329
 330         * config/tc-m32r.c (md_show_usage): Fix typos in descriptions.
 331         * config/tc-mt.c (md_assemble): Fix typos in warning messages.
 332         * cond.c (s_else): Fix typos in error messages.
 333         * config/tc-pj.c (md_assemble): Fix typo in error message.
 334
 335 2011-05-16  Hans-Peter Nilsson  <hp@axis.com>
 336
 337         * config/tc-cris.c (md_parse_option) <OPTION_PIC>: Error if not
 338         emitting ELF object.
 339         (md_show_usage): Only mention --pic if the assembler can generate
 340         ELF objects.
 341         * doc/c-cris.texi (CRIS-Opt): Mention that generating ELF is a
 342         prerequisite for --pic being a valid option.
 343
 344 2011-05-13  Frederic Marchal  <fmarchal@perso.be>
 345
 346         PR gas/12755
 347         * config/tc-v850.c (parse_register_list): Correct error string.
 348
 349 2011-05-12  Quentin Neill  <quentin.neill@amd.com>
 350
 351         * config/tc-i386.c (cpu_arch): Rename PROCESSOR_BDVER1 to PROCESSOR_BD.
 352         (i386_align_code): Ditto
 353
 354 2011-05-12  Matthew Gretton-Dann  <matthew.gretton-dann@arm.com>
 355
 356         PR gas/12715
 357         * config/tc-arm.c (parse_big_immediate):  Fix parsing of 64-bit
 358         immediates on 32-bit hosts.
 359
 360 2011-05-10  Quentin Neill  <quentin.neill@amd.com>
 361
 362         * config/tc-i386.c (cpu_arch): Add bdver2 and rename
 363         PROCESSOR_BDVER1 to PROCESSOR_BDVER.
 364         (i386_align_code): Rename PROCESSOR_BDVER1.
 365         (processor_type): Ditto.
 366         * doc/c-i386.texi: Add bdver2.
 367
 368 2011-05-10  Alan Modra  <amodra@gmail.com>
 369
 370         * dw2gencfi.c (tc_cfi_endproc): Avoid "set but not used" error.
 371
 372 2011-05-09  Paul Brook  <paul@codesourcery.com>
 373
 374         * config/tc-tic6x.c (streq): Define.
 375         (tic6x_get_unwind): New.
 376         (s_tic6x_cantunwind, s_tic6x_handlerdata, s_tic6x_endp,
 377         s_tic6x_personalityindex, s_tic6x_personality): New functions.
 378         (md_pseudo_table): Add "endp", "handlerdata", "personalityindex",
 379         "personality" and "cantunwind".
 380         (tic6x_regname_to_dw2regnum, tic6x_frame_initial_instructions,
 381         tic6x_start_unwind_section, tic6x_unwind_frame_regs,
 382         tic6x_pop_rts_offset_little, tic6x_pop_rts_offset_big,
 383         tic6x_unwind_reg_from_dwarf, tic6x_flush_unwind_word,
 384         tic6x_unwind_byte, tic6x_unwind_2byte, tic6x_unwind_uleb,
 385         tic6x_cfi_startproc, output_exidx_entry, tic6x_output_unwinding,
 386         tic6x_cfi_endproc): New.
 387         * config/tc-tic6x.h (TIC6X_NUM_UNWIND_REGS): Define.
 388         (tic6x_unwind_info): New.
 389         (tic6x_segment_info_type): Add marked_pr_dependency, unwind and
 390         text_unwind.
 391         (TARGET_USE_CFIPOP, tc_regname_to_dw2regnum,
 392         tc_cfi_frame_initial_instructions, DWARF2_DEFAULT_RETURN_COLUMN,
 393         DWARF2_CIE_DATA_ALIGNMENT, tc_cfi_startproc, tc_cfi_endproc,
 394         tc_cfi_section_name): Define.
 395         * doc/c-tic6x.texi: Document new unwinding directives.
 396         * dw2gencfi.c (tc_cfi_startproc, tc_cfi_endproc): Add default
 397         definitions.
 398         (cfi_insn_data, fde_entry, CFI_adjust_cfa_offset, CFI_return_column,
 399         CFI_rel_offset, CFI_escape, CFI_signal_frame, CFI_val_encoded_addr):
 400         Move to dw2gencfi.h.
 401         (CFI_EMIT_target): Define.
 402         (dot_cfi_sections): Check tc_cfi_section_name.
 403         (dot_cfi_startproc): Use tc_cfi_startproc.
 404         (dot_cfi_endproc): Use tc_cfi_endproc.
 405         * dw2gencfi.h (cfi_insn_data, fde_entry, CFI_adjust_cfa_offset,
 406         CFI_return_column, CFI_rel_offset, CFI_escape, CFI_signal_frame,
 407         CFI_val_encoded_addr):  Move to here from dw2gencfi.c.
 408
 409 2011-05-07  Alan Modra  <amodra@gmail.com>
 410
 411         * dw2gencfi.c (CUR_SEG, SET_CUR_SEG, HANDLED, SET_HANDLED): Define.
 412         Use throughout in place of #if SUPPORT_FRAME_LINKONCE.
 413         (struct fde_entry): Rename cseg to cur_seg.
 414         (cfi_change_reg_numbers): Remove ATTRIBUTE_UNUSED.
 415         (get_cfi_seg): Likewise.  Use if (SUPPORT_FRAME_LINKONCE) rather
 416         that #if SUPPORT_FRAME_LINKONCE.
 417         (cfi_finish): Likewise.
 418
 419 2011-05-06  Tristan Gingold  <gingold@adacore.com>
 420
 421         * read.c (s_comm_internal): Remove code for OBJ_VMS.
 422         (s_data): Ditto.
 423         (s_text): Ditto.
 424         * write.c (write_object_file): Ditto.
 425         * symbols.c (define_sym_at_dot): Ditto.
 426         (colon): Ditto.
 427
 428 2011-05-05  Alan Modra  <amodra@gmail.com>
 429
 430         * dw2gencfi.c (SUPPORT_FRAME_LINKONCE): Define.  Use throughout
 431         file to conditionally compile code added 2011-04-26.
 432         (cfi_change_reg_numbers): Add ATTRIBUTE_UNUSED on params only used
 433         when SUPPORT_FRAME_LINKONCE.
 434         (get_cfi_seg): Likewise.  Reintroduce old code for when not
 435         SUPPORT_FRAME_LINKONCE.
 436         (cfi_finish): Move get_cfi_seg calls out of loop when not
 437         SUPPORT_FRAME_LINKONCE.  Avoid unused var warning.
 438
 439 2011-05-03  Paul Brook  <paul@codesourcery.com>
 440
 441         * config/tc-tic6x.c (s_ehtype): New function.
 442         (md_pseudo_table): Add "ehtype".
 443         (tic6x_fix_adjustable, md_apply_fix): BFD_RELOC_C6000_EHTYPE.
 444         * doc/c-tic6x.texi: Document .ehtype directive.
 445
 446 2011-04-26  Kai Tietz  <ktietz@redhat.com>
 447
 448         * dw2gencfi.c (dwcfi_seg_list): New struct.
 449         (dwcfi_hash): New static hash variable.
 450         (get_debugseg_name): New.
 451         (alloc_debugseg_item): New.
 452         (make_debug_seg): New.
 453         (dwcfi_hash_insert): New.
 454         (dwcfi_hash_find): New.
 455         (dwcfi_hash_find_or_make): New.
 456         (cfi_insn_data): New member cur_seg.
 457         (cie_entry): Likewise.
 458         (fde_entry): New cseg and handled members.
 459         (alloc_fde_entry): Initialize cseg member.
 460         (alloc_cfi_insn_data): Initialize cur_seg member.
 461         (dot_cfi_sections): Compare for beginning of
 462         section names via strncmp.
 463         (get_cfi_seg): New.
 464         (cfi_finish): Treat link-once sections.
 465         (is_now_linkonce_segment): New local helper.
 466         (output_cie): Ignore cie entries not member of current
 467         segment.
 468         (output_fde): Likewise.
 469         (select_cie_for_fde): Likewise.
 470         (cfi_change_reg_numbers): Add new argument for current segment
 471         and ignore insn elements, if not part of current segment.
 472         * ehopt.c (get_cie_info): Use strncmp for
 473         section name matching.
 474         (heck_eh_frame): Likewise.
 475
 476 2011-04-20  Catherine Moore  <clm@codesourcery.com>
 477             David Ung <davidu@mips.com>
 478
 479         * config/mips.c (mips_cl_insn): Add new field complete_p.
 480         (create_insn): Initialize complete_p to zero.
 481         (BASE_REG_EQ): New.
 482         (fix_24k_align_to): New.
 483         (fix_24k_store_info): Declare.
 484         (fix_24k_sort): New.
 485         (fix_24k_record_store_info): New.
 486         (nops_for_24k): New.
 487         (nops_for_insn): Call nops_for_24k.
 488         (append_insn): Move O_constant expression handling.
 489
 490 2011-04-20  Alan Modra  <amodra@gmail.com>
 491
 492         * hash.c (set_gas_hash_table_size): Use bfd_hash_set_default_size.
 493         (hash_new_sized): New function, split out from..
 494         (hash_new): ..here.
 495
 496 2011-04-19  Nick Clifton  <nickc@redhat.com>
 497
 498         * config/tc-arm.c (v7m_psrs): Revert previous delta.
 499
 500 2011-04-18  Julian Brown  <julian@codesourcery.com>
 501             Nick Clifton  <nickc@redhat.com>
 502
 503         * config/tc-arm.c (parse_psr): Use selected_cpu not cpu_variant to
 504         detect M-profile targets.
 505         (do_t_swi): Exclude v7 and higher variants from arm_ext_os test.
 506         (v7m_psrs): Fix typo: basepri_max should be basepri_mask.
 507
 508 2011-04-14  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>
 509
 510         * config/tc-s390.c (s390_machine): New prototype.
 511         (md_pseudo_table): New pseudo-op .machine.
 512         (s390_opcode_hash): Initialize to NULL.
 513         (s390_parse_cpu): New function.
 514         (md_parse_option): Use s390_parse_cpu.
 515         (s390_setup_opcodes): New function.
 516         (md_begin): Use s390_setup_opcodes.
 517         (s390_machine): New hook handling the new .machine pseudo.
 518
 519         * doc/c-s390.texi: Document the new pseudo op .machine.
 520
 521 2011-04-12  H.J. Lu  <hongjiu.lu@intel.com>
 522
 523         * config/tc-i386.c (i386_mach): Start error message with lower
 524         case.
 525         (md_begin): Likewise.
 526         (md_parse_option): Likewise.
 527         (i386_target_format): Likewise.
 528         (check_byte_reg): Likewise.
 529         (check_long_reg): Likewise.
 530         (check_qword_reg): Likewise.
 531         (check_word_reg): Likewise.
 532
 533 2011-04-12  Nick Clifton  <nickc@redhat.com>
 534
 535         PR gas/12532
 536         * config/tc-arm.c (relax_branch): Do not relax branches to
 537         preemptable global symbols.
 538
 539 2011-04-11  Julian Brown  <julian@codesourcery.com>
 540
 541         * config/tc-arm.c (parse_psr): Add LHS argument. Improve support
 542         for *APSR bitmasks.
 543         (operand_parse_code): Replace OP_PSR with OP_wPSR and OP_rPSR.
 544         Remove OP_RVC_PSR.
 545         (parse_operands): Likewise.
 546         (do_mrs): Tweak error message for constraint.
 547         (do_t_mrs): Update constraints for changes to APSR support.
 548         (do_t_msr): Likewise. Don't set PSR_f flag here.
 549         (psrs): Remove "g", "nzcvq", "nzcvqg".
 550         (insns): Tweak entries for msr and mrs instructions.
 551
 552 2011-04-11  Kai Tietz  <ktietz@redhat.com>
 553
 554         * config/tc-i386.c (x86_cons): Initialize adjust with zero.
 555
 556 2011-04-11  Nick Clifton  <nickc@redhat.com>
 557
 558         * config/tc-i386.c (x86_cons): Define even for non-ELF targets.
 559         * config/tc-i386.h (x86_cons): Always prototype.
 560
 561         * config/tc-cr16.c (getprocregp_image): Fix type of 'r' parameter
 562         in order to avoid a compile time warning.
 563         (getprocreg_image): Likewise.
 564
 565 2011-04-11  Alan Modra  <amodra@gmail.com>
 566
 567         * config/tc-cr16.c (getprocreg_image): Correct range check.
 568         (getprocregp_image): Likewise.
 569
 570 2011-04-06  Joseph Myers  <joseph@codesourcery.com>
 571
 572         * configure.tgt (strongarm*be, strongarm*b, strongarm*,
 573         xscale*be|xscale*b, xscale*): Remove architectures.
 574         (thumb-*-coff, thumb-*-rtems*, thumb-*-elf, thumb-epoc-pe,
 575         thumb-*-pe, xscale-*-coff, xscale-*-elf): Remove targets.
 576
 577 2011-04-01  Tristan Gingold  <gingold@adacore.com>
 578
 579         * config/tc-ia64.c (md_apply_fix): Add a cast to avoid a warning.
 580
 581 2011-03-31  Bernd Schmidt  <bernds@codesourcery.com>
 582
 583         * config/tc-tic6x.c (sbss_section, scom_section, scom_symbol): New
 584         static variables.
 585         (md_begin): Initialize them.
 586         (s_tic6x_scomm): New static function.
 587         (md_pseudo_table): Add "scomm".
 588         (tc_gen_reloc): Really undo all adjustments made by
 589         bfd_install_relocation.
 590         * doc/c-tic6x.texi: Document the .scomm directive.
 591
 592 2011-03-31  Tristan Gingold  <gingold@adacore.com>
 593
 594         * dwarf2dbg.c (DWARF2_VERSION): Define.
 595         (out_debug_line): Use it.
 596         (out_debug_aranges): Ditto.
 597         (out_debug_info): Ditto.
 598         * config/tc-ia64.h (DWARF2_VERSION): Override it.
 599
 600 2011-03-30  Michael Snyder  <msnyder@vmware.com>
 601
 602         * obj-elf.c (obj_elf_section): Free malloced name.
 603         * macro.c (get_any_string): Free malloced br_buf.
 604         (do_formals): Free 'formal'.
 605
 606 2011-03-30  Tristan Gingold  <gingold@adacore.com>
 607
 608         * config/tc-ppc.c (ppc_frob_symbol): Convert stsym symbols value
 609         to offset only if within is set.
 610         (ppc_stabx): Reformat.  For stsym stabs, add a check and set
 611         within only for symbols.
 612
 613 2011-03-29  Richard Henderson  <rth@redhat.com>
 614
 615         PR 12610
 616         * config/tc-alpha.c (s_alpha_align): Don't auto-align a previous
 617         label; zap alpha_insn_label.
 618
 619 2011-03-29  H.J. Lu  <hongjiu.lu@intel.com>
 620
 621         * config/tc-i386.c (handle_quad): Properly handle multiple
 622         operands.
 623
 624 2011-03-29  Mike Frysinger  <vapier@gentoo.org>
 625
 626         * config/bfin-parse.y (BYTEUNPACK): Return yyerror when dest
 627         reg $2 is the same as dest reg $4.
 628
 629 2011-03-29  Mike Frysinger  <vapier@gentoo.org>
 630
 631         * config/bfin-parse.y (BYTEOP16M): Return yyerror when dest
 632         reg $2 is the same as dest reg $4.
 633
 634 2011-03-29  Mike Frysinger  <vapier@gentoo.org>
 635
 636         * config/bfin-parse.y (BYTEOP16P): Return yyerror when dest
 637         reg $2 is the same as dest reg $4.
 638
 639 2011-03-28  Mike Frysinger  <vapier@gentoo.org>
 640
 641         * config/bfin-parse.y (16bit acc add): Return yyerror when dest
 642         reg $1 is the same as dest reg $7.
 643
 644 2011-03-28  H.J. Lu  <hongjiu.lu@intel.com>
 645
 646         * config/tc-i386.c (handle_quad): New.
 647         (md_pseudo_table): Add "quad".
 648
 649 2011-03-26  John Marino  <binutils@marino.st>
 650
 651         * configure.tgt: Fix support for *-*-dragonfly*.
 652         * config/tc-i386.c: define SVR4_COMMENT_CHARS for dragonfly.
 653         * config/te-dragonfly.h: New file.
 654
 655 2011-03-24  Eric B. Weddington  <eric.weddington@atmel.com>
 656
 657         * config/tc-avr.c (mcu_types): Add new devices: atmega325pa,
 658         atmega3250pa, atmega3290pa, atmega16hvbrevb, atmega32hvbrevb,
 659         at90pwm161.
 660         * doc/c-avr.texi: Document new device names.
 661
 662 2011-03-24  Mike Frysinger  <vapier@gentoo.org>
 663
 664         * config/bfin-parse.y (dual 32bit add/sub): Return yyerror when dest
 665         reg $1 is the same as dest reg $7.
 666         (quad 16bit add/sub): Return yyerror when dest reg $1 is the same as
 667         dest reg $7.
 668
 669 2011-03-24  Mike Frysinger  <vapier@gentoo.org>
 670
 671         * config/bfin-parse.y (check_macfuncs): Clarify error message when
 672         P is mismatched.  Check destination regno are off by one when P is
 673         set, or are equal when P is not set.
 674
 675 2011-03-23  Mike Frysinger  <vapier@gentoo.org>
 676
 677         * config/bfin-parse.y (SEARCH): Return yyerror when dest reg $2 is
 678         the same as dest reg $4.
 679         (BITMUX): Return yyerror when dest reg $3 is the same as dest reg $5.
 680
 681 2011-03-23  Eric B. Weddington  <eric.weddington@atmel.com>
 682
 683         * config/tc-avr.c (mcu_types): Add new xmega devices: atxmega64a1u,
 684         atxmega128a1u, atxmega16x1, atxmega32x1, atxmega128b1, atxmega256a3bu.
 685         * doc/c-avr.texi: Document new device names.
 686
 687 2011-03-22  Eric B. Weddington  <eric.weddington@atmel.com>
 688
 689         * config/tc-avr.c (struct avr_opcodes_s): Add opcode field.
 690         (AVR_INSN): Change definition to match.
 691         (avr_opcodes): Likewise, change to match.
 692         (mcu_types): Add XMEGA architecture names and new XMEGA device names.
 693         (md_show_usage): Add XMEGA architecture names.
 694         (avr_operand): Add 'E' constraint for DES instruction of XMEGA devices.
 695         Add support for SPM Z+ instruction.
 696         * doc/c-avr.texi: Add documentation for XMEGA architectures and
 697         devices.
 698
 699 2011-03-21  Eric B. Weddington  <eric.weddington@atmel.com>
 700
 701         * config/tc-avr.c (md_show_usage): Add "Assembler" text to output.
 702
 703 2011-03-18  Alan Modra  <amodra@gmail.com>
 704
 705         * config/obj-elf.c (elf_frob_symbol): Report S_SET_SIZE symbol
 706         on .size expression errors rather than symbols in the size expression.
 707
 708 2011-03-18  Alan Modra  <amodra@gmail.com>
 709
 710         * input-scrub.c (line_numberT): Delete.
 711         (input_scrub_close): Reset line counters.
 712         * messages.c (as_show_where): Don't print invalid line number.
 713         (as_warn_internal, as_bad_internal): Likewise.
 714
 715 2011-03-18  Alan Modra  <amodra@gmail.com>
 716
 717         * read.c (read_a_source_file): Remove md_after_pass_hook.
 718         Move "quit" label before set of dot_symbol.
 719         * config/tc-d10v.h (md_after_pass_hook): Don't define.
 720         * config/tc-d30v.h (md_after_pass_hook): Likewise.
 721         * config/tc-m32r.h (md_after_pass_hook): Likewise.
 722         (md_cleanup): Define to call m32r_fill_insn.
 723
 724 2011-03-18  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>
 725
 726         * config/tc-s390.c (md_parse_option): Add -march=all option which
 727         switches to the highest available CPU.
 728
 729 2011-03-17  Alan Modra  <amodra@gmail.com>
 730
 731         PR 12569
 732         * expr.c (operand): Correct passing of "mode" to expr.
 733         * read.c (do_org): Allow expr_section.
 734         (get_known_segmented_expression): Don't assert anything about the
 735         segment.
 736
 737 2011-03-16  H.J. Lu  <hongjiu.lu@intel.com>
 738
 739         * as.c (show_usage): Add --size-check=.
 740         (parse_args): Add and handle OPTION_SIZE_CHECK.
 741
 742         * as.h (flag_size_check): New.
 743
 744         * config/obj-elf.c (elf_frob_symbol): Use as_bad to report
 745         bad .size directive only for --size-check=error.
 746
 747         * doc/as.texinfo: Document --size-check=.
 748
 749 2011-03-14  Mike Frysinger  <vapier@gentoo.org>
 750
 751         * config/tc-bfin.c (bfin_cpus[]): Add 0.4 for
 752         bf542/bf544/bf547/bf548/bf549.
 753
 754 2011-03-14  Richard Sandiford  <richard.sandiford@linaro.org>
 755
 756         * config/tc-arm.c (md_pcrel_from_section): Use S_FORCE_RELOC to
 757         determine whether a relocation is needed.
 758         (md_apply_fix, arm_apply_sym_value): Likewise.
 759
 760 2011-03-14  Richard Sandiford  <richard.sandiford@linaro.org>
 761
 762         * config/tc-arm.c (arm_adjust_symtab): Set the branch type
 763         for Thumb symbols.
 764
 765 2011-03-11  Nick Clifton  <nickc@redhat.com>
 766
 767         * remap.c (remap_debug_filename): Always allocate a buffer for the
 768         returned pointer.
 769         * stabs.c (stabs_generate_asm_file): Free the pointer returned by
 770         remap_debug_filename.
 771
 772 2011-03-10  Michael Snyder  <msnyder@vmware.com>
 773
 774         Revert the following change:
 775         * dwarf2dbg.c (out_file_list): Free malloced 'dir'.
 776         (out_debug_info): Free malloced 'dirname' and 'comp_dir'.
 777
 778 2011-03-10  Alan Modra  <amodra@gmail.com>
 779
 780         * gas/config/obj-elf.h (ELF_TARGET_SYMBOL_FIELDS,
 781         TARGET_SYMBOL_FIELDS): Don't define.
 782         * gas/config/tc-arc.c (arc_common): Use correct symbol "local" field.
 783
 784 2011-03-09  Michael Snyder  <msnyder@vmware.com>
 785
 786         * dwarf2dbg.c (out_file_list): Free malloced 'dir'.
 787         (out_debug_info): Free malloced 'dirname' and 'comp_dir'.
 788         (emit_fixed_inc_line_addr): Assign instead of conditional in
 789         assert.
 790
 791 2011-03-05  H.J. Lu  <hongjiu.lu@intel.com>
 792
 793         * config/obj-elf.c (elf_frob_symbol): Mention symbol name in
 794         non-constant .size expression.
 795
 796 2011-03-02  Nick Clifton  <nickc@redhat.com>
 797
 798         * ecoff.c: Incldue filenames.h
 799
 800 2011-02-28  Kai Tietz  <kai.tietz@onevision.com>
 801
 802         * depend.c (register_dependency): Use filename_(n)cmp.
 803         * dwarf2dbg.c (get_filenum): Likewise.
 804         * ecoff.c (add_file): Likewise.
 805         (ecoff_generate_asm_lineno): Likewise.
 806         * input-scrub.c (new_logical_line_flags): Likewise.
 807         * listing.c (file_info): Likewise.
 808         (listing_newline): Likewise.
 809         * remap.c (remap_debug_filename): Likewise.
 810         * stabs.c (generate_asm_file): Likewise.
 811         (stabs_generate_asm_lineno): Likewise.
 812
 813 2011-02-28  Maciej W. Rozycki  <macro@codesourcery.com>
 814
 815         * config/tc-mips.c (append_insn): Disable branch relaxation for
 816         DSP instructions.
 817
 818 2011-02-28  Maciej W. Rozycki  <macro@codesourcery.com>
 819
 820         * config/tc-mips.c (macro): Handle M_PREF_AB.
 821
 822 2011-02-28  Maciej W. Rozycki  <macro@codesourcery.com>
 823
 824         * config/tc-mips.c (RELAX_BRANCH_ENCODE): Encode the temporary
 825         register to use.
 826         (RELAX_BRANCH_UNCOND): Adjust accordingly.
 827         (RELAX_BRANCH_LIKELY): Likewise.
 828         (RELAX_BRANCH_LINK): Likewise.
 829         (RELAX_BRANCH_TOOFAR): Likewise.
 830         (RELAX_BRANCH_AT): New macro.
 831         (append_insn): Encode the temporary register to use in standard
 832         MIPS branch relaxation.
 833         (relaxed_branch_length): Update according to changes to
 834         RELAX_BRANCH_ENCODE.
 835         (md_convert_frag): Use the encoded register as the temporary.
 836
 837 2011-02-28  Maciej W. Rozycki  <macro@codesourcery.com>
 838
 839         * config/tc-mips.c (mips_fix_adjustable): On REL targets also
 840         reject PC-relative relocations.
 841
 842 2011-02-28  Maciej W. Rozycki  <macro@codesourcery.com>
 843
 844         * config/tc-mips.c (md_convert_frag): Correct message
 845         capitalization.
 846
 847 2011-02-28  Alan Modra  <amodra@gmail.com>
 848
 849         * symbols.c (report_op_error): Remove unnecessary forward declaration.
 850         Add "op" parameter.  Report operator and operand segments in error
 851         message, not operand symbols.
 852         (resolve_symbol_value): Always set segment for equated symbols, not
 853         just when finalizing.  Adjust report_op_error calls.
 854
 855 2011-02-25  H.J. Lu  <hongjiu.lu@intel.com>
 856
 857         * config/tc-i386.c (reloc): Don't sign-check 4-byte relocations
 858         if 64bit relocations aren't allowed.
 859
 860 2011-02-25  Alan Modra  <amodra@gmail.com>
 861
 862         PR gas/12519
 863         * config/obj-elf.c (elf_frob_symbol): Properly handle size expression.
 864
 865 2011-02-21  Maciej W. Rozycki  <macro@codesourcery.com>
 866
 867         * config/tc-mips.c (mips_ip) <'o'>: Remove duplicate
 868         initialization of offset_reloc.
 869
 870 2011-02-15  Richard Henderson  <rth@redhat.com>
 871
 872         * dw2gencfi.c (dot_cfi_dummy): New.
 873         (cfi_pseudo_table) [!TARGET_USE_CFIPOP]: New.
 874         * read.c (pobegin): Unconditionally call cfi_pop_insert.
 875
 876 2011-02-13  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 877
 878         * configure: Regenerate.
 879
 880 2011-02-13  Mike Frysinger  <vapier@gentoo.org>
 881
 882         * config/bfin-lex.l (BYTEOP2M): Remove tokenization.
 883         * config/bfin-parse.y (BYTEOP2M): Delete token.
 884         (asm_1): Remove BYTEOP2M insn matching.
 885
 886 2011-02-12  Mike Frysinger  <vapier@gentoo.org>
 887
 888         * config/bfin-defs.h: Include opcode/bfin.h.
 889         (M_S2RND, M_T, M_W32, M_FU, M_TFU, M_IS, M_ISS2, M_IH, M_IU): Delete.
 890
 891 2011-02-11  Mike Frysinger  <vapier@gentoo.org>
 892
 893         * doc/c-bfin.texi (Instruction Delimiting): Fix occur typo.
 894         (Modify Registers): Fix subtracted typo.
 895         (.byte2): Extend and swap descriptions with .byte4.
 896         (.byte4): Extend and swap descriptions with .byte2.
 897         (.db, .dw, .dd): Document behavior.
 898
 899 2011-02-11  Mike Frysinger  <vapier@gentoo.org>
 900
 901         * config/bfin-parse.y (TESTSET): Reject REG_SP and REG_FP.
 902
 903 2011-02-11  Alan Modra  <amodra@gmail.com>
 904
 905         * doc/c-ppc.texi (PowerPC-Opts <-nops>): Clarify.
 906
 907 2011-02-10  Alan Modra  <amodra@gmail.com>
 908
 909         * doc/as.texinfo (Overview): Add missing markup around Blackfin
 910         and PowerPC options.
 911
 912 2011-02-10  Alan Modra  <amodra@gmail.com>
 913
 914         * config/tc-ppc.c (md_show_usage): Remove -l and -b.  Add -K PIC.
 915         * doc/as.texinfo: Refer to and include c-ppc.texi for PowerPC options.
 916         (Overview <Target PowerPC options>): Add a number of missing options.
 917         * doc/c-ppc.texi: Likewise.  Add markup for use in manpage generation.
 918
 919 2011-02-08  H.J. Lu  <hongjiu.lu@intel.com>
 920
 921         PR gas/6957
 922         * config/tc-i386.c (i386_align_code): Use f32_patt when tuning
 923         for i686.
 924
 925 2011-02-08  H.J. Lu  <hongjiu.lu@intel.com>
 926
 927         * config/tc-i386.c (set_cpu_arch): Also update cpu_arch_isa_flags
 928         for ISA extensions.
 929         (md_parse_option): Likewise.
 930
 931 2011-02-04  Bernd Schmidt  <bernds@codesourcery.com>
 932
 933         * doc/as.texinfo (Target TIC6X options): Don't mention "-matomic".
 934         * doc/c-tic6x.texi (TIC6X Directives): Don't mention ".atomic".
 935         (TIC6X Options): Don't mention "-matomic".
 936         * config/tc-tic6x.c (OPTION_MATOMIC, OPTION_MNO_ATOMIC): Delete.
 937         (md_longopts): Remove corresponding entries.
 938         (md_parse_option): Don't handle them.
 939         (md_show_usage): Don't document them.
 940         (tic6x_atomic): Delete variable.
 941         (tic6x_update_features): Always copy tic6x_arch_enable to
 942         tic6x_features.
 943         (tic6x_arch_enable): Remove references to TIC6X_INSN_ATOMIC.
 944         (s_tic6x_atomic, s_tic6x_noatomic): Remove functions.
 945         (md_pseudo_table): Remove ".atomic" and ".noatomic".
 946
 947 2011-01-31  Nick Clifton  <nickc@redhat.com>
 948
 949         * write.c (write_contents): Include output file name and bfd error
 950         value when reporting the inability to write to the output file.
 951         * config/tc-rx.c (rx_handle_align): Do not insert NOPs into align
 952         frag that has a non-zero fill value.
 953
 954 2011-01-27  DJ Delorie  <dj@redhat.com>
 955
 956         * config/tc-rx.c (md_convert_frag): If we can't compute the target
 957         address, zero out the values stored in the object file to make
 958         objdump's output consistent.
 959
 960 2011-01-26  Kai Tietz  <kai.tietz@onevision.com>
 961
 962         * config/tc-i386.c (md_begin): Set for x64 windows COFF target
 963         x86_dwarf2_return_column to 32.
 964
 965 2011-01-20  Nick Clifton  <nickc@redhat.com>
 966
 967         PR gas/12384
 968         * config/tc-h8300.c (constant_fits_width_p): Use correct type for
 969         comparison.
 970
 971 2011-01-18  H.J. Lu  <hongjiu.lu@intel.com>
 972
 973         * write.c (compress_debug): Return if section size is smaller
 974         than 32 bytes.
 975
 976 2011-01-18  H.J. Lu  <hongjiu.lu@intel.com>
 977
 978         PR gas/12409
 979         * write.c (compress_debug): Return if section size is 0.
 980
 981 2011-01-18  Mingfeng Wu  <mingfeng@faraday-tech.com>
 982
 983         * config/tc-arm.c (arm_cpus): Add Faraday ARMv5TE compatible
 984         cores: fa606te, fa616te, fmp626.  Modify the VFP of fa626te.
 985         * doc/c-arm.texi (ARM Options): Add -mcpu={fa606te, fa616te,
 986         fmp626} options.
 987
 988 2011-01-18  Nick Clifton  <nickc@redhat.com>
 989
 990         PR gas/12390
 991         * doc/all.texi: Add NS32K
 992         * doc/as.texinfo: Remove target specific details of which
 993         characters act as comment initiators and statement separators into
 994         individual target specific files.
 995         * doc/c-alpha.texi (Alpha-Chars): Document special behaviour of
 996         the hash character at the start of a line.
 997         * doc/c-arm.texi (ARM-Chars): Likewise.
 998         * doc/c-avr.texi (AVR-Chars): Likewise.
 999         * doc/c-d10v.texi (D10V-Chars): Likewise.
1000         * doc/c-d30v.texi (D30V-Chars): Likewise.
1001         * doc/c-mmix.texi (MMIX-Chars): Likewise.
1002         * doc/c-s390.texi (s390 characters): Likewise.
1003         * doc/c-sh.texi (SH-Chars): Likewise.
1004         * doc/c-sh64.texi (SH64-Chars): Likewise.
1005         * doc/c-sparc.texi (SPARC-Chars): Likewise.
1006         * doc/c-tic6x.texi (TIC6X Syntax): Likewise.
1007         * doc/c-xtensa.texi (Xtensa Syntax): Likewise.
1008         * doc/c-z80.texi (Z80-Chars): Likewise.
1009         * doc/c-z8k.texi (Z8000-Chars): Likewise.
1010         * doc/c-pdp11.texi (PDP11-Syntax): Document line separator character.
1011         * doc/c-arc.texi (ARC-Chars): Fill in this subsection.
1012         * doc/c-bfin.texi (Blackfin Syntax): Document line comment and
1013         line separator characters.
1014         * doc/c-cr16.texi (CR16 Syntax): Likewise.
1015         * doc/c-i386.texi (i386-Chars): Likewise.
1016         * doc/c-i860.texi (i860-Chars): Likewise.
1017         * doc/c-i960.texi (i960-Chars): Likewise.
1018         * doc/c-ip2k.texi (IP2K-Chars): Likewise.
1019         * doc/c-lm32.texi (LM32-Chars): likewise.
1020         * doc/c-m32c.texi (M32C-Chars): Likewise.
1021         * doc/c-m68hc11.texi (M68HC11-syntax): Likewise.
1022         * doc/c-m68k.texi (M68K-Chars): Likewise.
1023         * doc/c-microblaze.texi (MicroBlaze-Chars): Likewise.
1024         * doc/c-msp430.texi (MSP430-Chars): Likewise.
1025         * doc/c-mt.texi (MT-Chars): Likewise.
1026         * doc/c-ns32k.texi (NS32K-Chars): Likewise.
1027         * doc/c-pj.texi (PJ-Chars): Likewise.
1028         * doc/c-ppc.texi (PowerPC-Chars): Likewise.
1029         * doc/c-rx.texi (RX-Chars): Likewise.
1030         * doc/c-score.texi (SCORE-Chars): Likewise.
1031         * doc/c-tic54x.texi (TIC54X-Chars): Likewise.
1032         * doc/c-v850.texi (V850-Chars): Likewise.
1033         * doc/c-vax.texi (VAX-Chars): Likewise.
1034         * doc/c-xc16x.texi (xc16x-Chars): Likewise.
1035
1036 2011-01-17  Quentin Neill  <quentin.neill@amd.com>
1037
1038         * config/tc-i386.c (cpu_arch): Add CPU_TBM_FLAGS.
1039
1040         * doc/c-i386.texi (i386-TBM): New section.
1041
1042 2011-01-16  H.J. Lu  <hongjiu.lu@intel.com>
1043
1044         * config/tc-i386.c (disallow_64bit_disp): Renamed to ...
1045         (disallow_64bit_reloc): This.
1046         (md_assemble): Don't check movabs for x32 mode here.
1047         (i386_target_format): Updated.
1048         (tc_gen_reloc): Check if 64bit relocations are allowed.
1049
1050 2011-01-15  H.J. Lu  <hongjiu.lu@intel.com>
1051
1052         * config/tc-i386.c (disallow_64bit_disp): New.
1053         (x86_elf_abi): Replace X86_64_LP64_ABI/X86_64_ILP32_ABI with
1054         X86_64_ABI/X86_64_X32_ABI.
1055         (md_assemble): Don't allow movabs with relocation in x32 mode.
1056         (i386_target_format): Updated.
1057
1058 2011-01-14  H.J. Lu  <hongjiu.lu@intel.com>
1059
1060         * config/tc-i386.c (OPTION_N32): Renamed to ...
1061         (OPTION_X32): This.
1062         (md_longopts): Replace n32 with x32.
1063         (md_parse_option): Updated.
1064         (md_show_usage): Likewise.
1065
1066         * doc/c-i386.texi: Replace --n32 with --x32.
1067
1068 2011-01-11  Mingjie Xing  <mingjie.xing@gmail.com>
1069
1070         * config/tc-mips.c (mips_ip): Update error messages.  Take an
1071         unadjusted offset for "+c" argument.
1072
1073 2011-01-10  Nick Clifton  <nickc@redhat.com>
1074
1075         * config/tc-i386.c (x86_elf_abi): Only define for targets that use
1076         it.
1077
1078 2011-01-10  Nick Clifton  <nickc@redhat.com>
1079
1080         * config/tc-arm.c (s_arm_tls_desceq): Move code into ELF-only
1081         part of the file.
1082
1083 2011-01-10  Nathan Sidwell  <nathan@codesourcery.com>
1084             Glauber de Oliveira Costa  <glommer@gmail.com>
1085
1086         * doc/c-arm.texi: Document TLSDESC and TLSCALL relocations, and
1087         .tlsdescseq directive.
1088         * config/tc-arm.c (arm_typed_reg_parse): Check for potential reloc
1089         following a symbol.
1090         (s_arm_tls_descseq): New directive.
1091         (md_pseudo_table): Add it.
1092         (encode_branch): Allow TLS_CALL relocs too.
1093         (do_t_blx, do_t_branch23): Use encode_branch.
1094         (reloc_names): Add tlsdesc and tlscall.
1095         (md_apply_fix): Process tls desc relocations.
1096         (tc_gen_reloc): Likewise.
1097         (arm_fix_adjustable): Likewise.
1098
1099 2011-01-07  Quentin Neill  <quentin.neill@amd.com>
1100
1101         * config/tc-i386.c (cpu_arch): Add CPU_BMI_FLAGS.
1102
1103         * doc/c-i386.texi (i386-BMI): New section.
1104
1105 2011-01-06  Paul Koning  <ni1d@arrl.net>
1106
1107         * config/tc-pdp11.c (parse_op_no_deferred): Allow PC-relative
1108         references to absolute addresses.
1109
1110 2011-01-05  DJ Delorie  <dj@redhat.com>
1111
1112         * config/tc-rx.c (tc_gen_reloc): Emit an RX_OP_NEG expression
1113         instead of an RH_NEG32 one.
1114
1115 2011-01-05  Jonathan Wakely  <jwakely.gcc@gmail.com>
1116
1117         * doc/c-i386.texi: Clarify --n32.
1118
1119 2011-01-04  H.J. Lu  <hongjiu.lu@intel.com>
1120
1121         * config/tc-i386.c (build_modrm_byte): Allow encoding 32/64bit
1122         integer registers in VEX.vvvv.  Check register-only source
1123         operand when two source operands are swapped.  Properly update
1124         destination when two source operands are swapped.
1125
1126 2011-01-01  H.J. Lu  <hongjiu.lu@intel.com>
1127
1128         * gas.c (parse_args): Update copyright to 2011.
1129
1130 For older changes see ChangeLog-2010
1131 \f
1132 Local Variables:
1133 mode: change-log
1134 left-margin: 8
1135 fill-column: 74
1136 version-control: never
1137 End: