gas/ChangeLog

   1 2011-06-29  Richard Sandiford  <rdsandiford@googlemail.com>
   2
   3         * config/tc-mips.c (append_method): New enum.
   4         (can_swap_branch_p, get_append_method): New functions.
   5         (append_insn): Use get_append_method to decide how the instruction
   6         should be added.
   7
   8 2011-06-29  Richard Sandiford  <rdsandiford@googlemail.com>
   9
  10         * config/tc-mips.c (append_insn): Remove bogus goto.
  11
  12 2011-06-29  Richard Sandiford  <rdsandiford@googlemail.com>
  13
  14         * config/tc-mips.c (append_insn): Always clear the history after an
  15         unconditional branch.
  16
  17 2011-06-29  Richard Sandiford  <rdsandiford@googlemail.com>
  18
  19         * config/tc-mips.c (find_altered_mips16_opcode): New function.
  20         (append_insn): Use it.
  21
  22 2011-06-29  Richard Sandiford  <rdsandiford@googlemail.com>
  23
  24         * config/tc-mips.c (insn_uses_reg): Delete.
  25         (gpr_read_mask, gpr_write_mask): New functions.
  26         (fpr_read_mask, fpr_write_mask): Likewise.
  27         (insns_between, nops_for_vr4130, append_insn): Use them.
  28
  29 2011-06-29  Richard Sandiford  <rdsandiford@googlemail.com>
  30
  31         * config/tc-mips.c (md_mips_end): Call mips_emit_delays.
  32
  33 2011-06-29  Dave Martin  <dave.martin@linaro.org>
  34
  35         PR gas/12931
  36         * config/tc-arm.c (mapping_state): When changing to ARM or THUMB
  37         state set the minimum required alignment of the section.
  38
  39 2011-06-29  Tristan Gingold  <gingold@adacore.com>
  40
  41         * config/tc-i386.c (i386_mach): Convert to ISO-C.
  42         (md_begin, pe_directive_secrel, md_estimate_size_before_relax): Ditto.
  43         (md_convert_frag, md_apply_fix, md_undefined_symbol): Ditto.
  44         (md_section_align, tc_gen_reloc): Ditto.
  45
  46 2011-06-28  Tristan Gingold  <gingold@adacore.com>
  47
  48         * config/tc-alpha.c (s_alpha_pdesc): Fix indentation. Do not
  49         generate dummy fix.
  50
  51 2011-06-28  Tristan Gingold  <gingold@adacore.com>
  52
  53         * config/tc-alpha.c (load_expression): Use alloca instead of xmalloc.
  54         (emit_jsrjmp): Ditto.
  55         (tc_gen_reloc): Ditto.
  56
  57 2011-06-28  Tristan Gingold  <gingold@adacore.com>
  58
  59         * config/tc-alpha.c (alpha_evax_proc_hash): Remove.
  60         (alpha_evax_proc_data): New variable.
  61         (s_alpha_ent): Prevent nested function.  Remove has_insert call.
  62         (s_alpha_pdesc): Do not call demand_empty_rest_of_line in case of
  63         error.  Do not search in the hash table.  Check if match with .ent.
  64         (s_alpha_name): Remove unused variable.
  65         (md_begin): Remove initialization of alpha_evax_proc_hash.
  66
  67 2011-06-27  Tristan Gingold  <gingold@adacore.com>
  68
  69         * config/tc-alpha.c (add_to_link_pool): Remove basesym parameter.
  70         Locally declare basesym.  Add comments.  Do not set literal_pool_size.
  71         (load_expression): Adjust call to add_to_link_pool.
  72         (s_alpha_pdesc): Define pdesc symbol using dot.
  73         Do not set literal_pool_size.
  74         (s_alpha_end): Use NULL instead of 0.
  75
  76 2011-06-27  Tristan Gingold  <gingold@adacore.com>
  77
  78         * config/obj-evax.c (evax_frob_file_before_adjust): Add comments.
  79         Fix style.
  80         * config/obj-evax.h (struct alpha_linkage_fixups): Remove seg
  81         field.  Add comments.
  82         (obj_symbol_type, object_headers, OBJ_SYMFIELD_TYPE): Remove
  83
  84 2011-06-26  Richard Sandiford  <rdsandiford@googlemail.com>
  85
  86         * config/tc-mips.c (fix_24k_record_store_info): If the previous
  87         instruction was a store, and the next instructions are unknown,
  88         assume the worst.
  89
  90 2011-06-25  Richard Sandiford  <rdsandiford@googlemail.com>
  91
  92         PR gas/12915
  93         * config/tc-mips.c (nops_for_vr4130, nops_for_24k, nops_for_insn)
  94         (nops_for_sequence, nops_for_insn_or_target): Add ignore parameters.
  95         (mips_emit_delays, start_noreorder): Update accordingly.
  96         (append_insn): Likewise.  Revert original fix for this PR
  97         and use the ignore parameter instead.
  98
  99 2011-06-24  Tristan Gingold  <gingold@adacore.com>
 100
 101         PR gas/11625
 102         * config/obj-evax.c (evax_frob_symbol): Use as_bad instead of abort.
 103
 104 2011-06-24  Tristan Gingold  <gingold@adacore.com>
 105
 106         * config/tc-alpha.c (add_to_link_pool): Remove useless offset
 107         variable.  Fix style.
 108
 109 2011-06-23  Richard Sandiford  <rdsandiford@googlemail.com>
 110
 111         PR gas/12915
 112         * config/tc-mips.c (append_insn): Only consider hazards between the
 113         pre-noreorder block and ip.
 114
 115 2011-06-21  Sameera Deshpande  <sameera.deshpande@arm.com>
 116
 117         * config/tc-arm.c (vfp_conv): Add check on range of immediate operand
 118         in vcvt instruction between floating-point and fixed-point.
 119         (operand_parse_code): Add "OP_oI32z".
 120         (parse_operands): OP_oI32z case added.
 121
 122 2011-06-20  H.J. Lu  <hongjiu.lu@intel.com>
 123
 124         * configure.tgt: Revert x32 change.
 125
 126 2011-06-20  Nick Clifton  <nickc@redhat.com>
 127
 128         * doc/Makefile.am: (CPU_DOCS): Add c-xstormy16.texi.
 129         * doc/Makefile.in: Regenerate.
 130         * doc/all.texi: Set XSTORMY16.
 131         * doc/c-xstormy16.texi: New file.
 132
 133 2011-06-19  H.J. Lu  <hongjiu.lu@intel.com>
 134
 135         * configure.tgt: Support x32.
 136
 137 2011-06-15  Nick Clifton  <nickc@redhat.com>
 138
 139         * NEWS: Mention addition of TILEPRO and TIKE-Gx support.
 140
 141 2011-06-14  Tristan Gingold  <gingold@adacore.com>
 142
 143         * config/tc-ppc.h (struct ppc_tc_sy): Complete comment on within.
 144         (tc_new_dot_label): Define.
 145         (ppc_new_dot_label): Declare.
 146         * config/tc-ppc.c (ppc_frob_label): Set within target field.
 147         (ppc_fix_adjustable): Use this field to adjust the reloc.
 148         (ppc_new_dot_label): New function.
 149
 150 2011-06-14  Alan Modra  <amodra@gmail.com>
 151
 152         * po/POTFILES.in: Regenerate.
 153
 154 2011-06-13  Walter Lee  <walt@tilera.com>
 155
 156         * Makefile.am (TARGET_CPU_CFILES): Add config/tc-tilegx.c and
 157         config/tc-tilepro.c.
 158         (TARGET_CPU_HFILES): Add config/tc-tilegx.h and
 159         config/tc-tilepro.h.
 160         * Makefile.in: Regenerate.
 161         * configure.tgt (tilepro-*-*): New.
 162         (tilegx-*-*): Likewise.
 163         * config/tc-tilegx.c: New file.
 164         * config/tc-tilegx.h: Likewise.
 165         * config/tc-tilepro.h: Likewise.
 166         * config/tc-tilepro.c: Likewise.
 167         * doc/Makefile.am (CPU_DOCS): Add c-tilegx.texi and
 168         c-tilepro.texi.
 169         * doc/Makefile.in: Regenerate.
 170         * doc/all.texi (TILEGX): Define.
 171         (TILEPRO): Define.
 172         * doc/as.texinfo: Add Tile-Gx and TILEPro documentation.  Include
 173         c-tilegx.texi and c-tilepro.texi.
 174         * doc/c-tilegx.texi: New.
 175         * doc/c-tilepro.texi: New.
 176
 177 2011-06-13  Nick Clifton  <nickc@redhat.com>
 178
 179         PR gas/12854
 180         * config/tc-arm.c (do_shift): Do not allow shift operations at the
 181         end of a register based shift insn.
 182         (do_t_shift): Likewise.
 183
 184 2011-06-13  Nick Clifton  <nickc@redhat.com>
 185
 186         * config/tc-score.c (s3_my_get_expression): Delete unused local
 187         variable 'seg'.
 188         (s3_do_ldst_insn): Delete unused local variable 'strbak'.
 189         (s3_do16_ldst_insn): Delete unused local variable 'temp'.
 190         (s3_do_macro_bcmp): Zero inst_expand array.
 191         (s3_do_macro_bcmpz): Likewise.
 192         (s3_s_score_end): Delete unused local variable 'dot'.
 193         (s3_gen_reloc): Delete unused local variables 'f', 's', and 'e'.
 194         * config/tc-score7.c (s7_my_get_expression): Delete unused local
 195         variable 'seg'.
 196         (s7_do_ldst_insn): Delete unused local variable 'strbak'.
 197         (s7_b32_relax_to_b16): Delete unused local variables 'r_old' and
 198         'r_new'.
 199         (s7_s_score_end): Delete unused local variable 'dot'.
 200         (s7_relax_frag): Delete unused local variable 'relax_size'.
 201         (s7_gen_reloc): Delete unused local variables 'f', 's', and 'e'.
 202
 203 2011-06-10  H.J. Lu  <hongjiu.lu@intel.com>
 204
 205         AVX Programming Reference (June, 2011)
 206         * config/tc-i386.c (i386_error): Add invalid_vsib_address and
 207         unsupported_vector_index_register.
 208         (cpu_arch): Add .avx2, .bmi2, .lzcnt and .invpcid.
 209         (check_VecOperands): New.
 210         (match_template): Call check_VecOperands.  Handle
 211         invalid_vsib_address and unsupported_vector_index_register.
 212         (build_modrm_byte): Support VecSIB.  Check register-only source
 213         operand when two source operands are swapped.
 214         (i386_index_check): Allow Xmm/Ymm index registers.
 215
 216         * doc/c-i386.texi: Document avx2/.avx2, bmi2/.bmi2, lzcnt/.lzcnt
 217         and invpcid./invpcid.
 218
 219 2011-06-09  Nick Clifton  <nickc@redhat.com>
 220
 221         PR gas/12861
 222         * config/tc-cr16.c (tc_gen_reloc): Remove unused local variable
 223         code.
 224         (check_cinv_options): Remove unused local variables.  Make
 225         function void.
 226         (md_assemble): Remove unused local variable.
 227
 228 2011-06-09  James Greenhalgh  <james.greenhalgh@arm.com>
 229
 230         * config/tc-arm.c (do_ldrd): Warn in unpredictable cases.
 231
 232 2011-06-03  Arnaud Patard  <arnaud.patard@rtp-net.org>
 233
 234         PR gas/12698
 235         * config/tc-arm.c (parse_psr): Set m_profile to false when
 236         assembling for any architecture.
 237
 238 2011-06-02  Jie Zhang jie@codesourcery.com
 239             Nathan Sidwell nathan@codesourcery.com
 240
 241         * config/tc-arm.c (parse_address_main): Handle -0 offsets.
 242         (encode_arm_addr_mode_2): Set default sign of zero here ...
 243         (encode_arm_addr_mode_3): ... and here.
 244         (encode_arm_cp_address): ... and here.
 245         (md_apply_fix): Use default sign of zero here.
 246
 247 2011-06-02  Nick Clifton  <nickc@redhat.com>
 248
 249         * as.c: Fix spelling typo.
 250         * read.c: Likewise.
 251         * config/tc-ppc.c: Likewise.
 252         * po/gas.pit: Regenerate.
 253
 254 2011-05-31  Paul Brook  <paul@codesourcery.com>
 255
 256         * config/tc-arm.c (arm_cpus): Add Cortex-R5.
 257         (arm_extensions): Allow idiv on ARMv7-R.
 258         * doc/c-arm.text: Update idiv extension restrictions.
 259
 260 2011-05-31  Paul Brook  <paul@codesourcery.com>
 261
 262         * config/tc-arm.c (arm_force_relocation): Resolve all pc-relative
 263         loads.
 264
 265 2011-05-31  Paul Brook  <paul@codesourcery.com>
 266
 267         * config/tc-arm.c (do_t_branch): Avoid relaxing branches to constant
 268         addresses.
 269
 270 2011-05-31  Paul Brook  <paul@codesourcery.com>
 271         Nathan Sidwell  <nathan@codesourcery.com>
 272
 273         * config/tc-arm.c (fix_new_arm): Create an absolute symbol for
 274         pc-relative fixes to constants.
 275         * config/tc-arm.h (TC_FORCE_RELOCATATION_ABS): Define.
 276
 277 2011-05-27  Nick Clifton  <nickc@redhat.com>
 278
 279         * config/tc-s390.c (md_begin): Remove unused variable dup_insn.
 280
 281 2011-05-24  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>
 282
 283         * config/tc-s390.c (md_gather_operands): Fix check for floating
 284         register pair operands.
 285
 286 2011-05-24  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>
 287
 288         * config/tc-s390.c (md_gather_operands): Emit an error for odd
 289         numbered registers used as register pair operand.
 290
 291 2011-05-23  Nick Clifton  <nickc@redhat.com>
 292
 293         * config/tc-v850.h (TC_FX_SIZE_SLACK): Define.
 294
 295 2011-05-20  Bernd Schmidt  <bernds@codesourcery.com>
 296
 297         * config/tc-tic6x.c (tic6x_operators): Add "pcr_offset".
 298         (tic6x_parse_name): Handle it.
 299         (tic6x_fix_new_exp): Handle O_pcr_offset.
 300         (tic6x_fix_adjustable): Return 0 for the new relocs.
 301         (md_apply_fix): Handle them.
 302         (tc_gen_reloc): Likewise.
 303         * config/tc-tic6x.h (tic6x_fix_info): Add a fix_subsy member.
 304
 305 2011-05-18  Nick Clifton  <nickc@redhat.com>
 306
 307         PR gas/12754
 308         * config/tc-tic30.c (ordinal_names): Allow translation of the
 309         ordinal names.
 310
 311 2011-05-18  Nick Clifton  <nickc@redhat.com>
 312
 313         * config/tc-arm.c (s_unreq): Reword warning message to make it
 314         easier to translate.
 315         * config/tc-ia64.c (md_show_usage): Add note for translators.
 316         * configure.in (ALL_LINGUAS): Add "fi".
 317         * configure: Regenerate.
 318
 319 2011-05-18  Tristan Gingold  <gingold@adacore.com>
 320
 321         * config/tc-ppc.h (ppc_tc_sy): Reorder fields.
 322         Put size into an union with dw.
 323         (OBJ_COPY_SYMBOL_ATTRIBUTES): Adjust.
 324         (ppc_xcoff_end): Declare.
 325         (md_end): Define.
 326         * config/tc-ppc.c: Add includes for xcoff.
 327         (ppc_dwsect): New function.
 328         (md_pseudo_table): Add dwsect.
 329         (struct dw_subsection): New.
 330         (dw_sections): New.
 331         (ppc_change_debug_section): New function.
 332         (ppc_xcoff_end): Ditto.
 333         (ppc_function): Adjust for ppc_tc_sy.
 334         (ppc_symbol_new_hook): Ditto.
 335         (ppc_frob_symbol): Ditto.
 336         (ppc_frob_section): Do not set vma for debug sections.
 337         (ppc_fix_adjustable): Return true for debug sections.
 338         * config/obj-coff.c: Add includes for xcoff.
 339         (coff_frob_section): Handle dwarf section.
 340
 341 2011-05-17  Nick Clifton  <nickc@redhat.com>
 342
 343         * po/fi.po: New Finnish translation.
 344         * po/fr.po: Updated French translation.
 345
 346         * config/tc-m32r.c (md_show_usage): Fix typos in descriptions.
 347         * config/tc-mt.c (md_assemble): Fix typos in warning messages.
 348         * cond.c (s_else): Fix typos in error messages.
 349         * config/tc-pj.c (md_assemble): Fix typo in error message.
 350
 351 2011-05-16  Hans-Peter Nilsson  <hp@axis.com>
 352
 353         * config/tc-cris.c (md_parse_option) <OPTION_PIC>: Error if not
 354         emitting ELF object.
 355         (md_show_usage): Only mention --pic if the assembler can generate
 356         ELF objects.
 357         * doc/c-cris.texi (CRIS-Opt): Mention that generating ELF is a
 358         prerequisite for --pic being a valid option.
 359
 360 2011-05-13  Frederic Marchal  <fmarchal@perso.be>
 361
 362         PR gas/12755
 363         * config/tc-v850.c (parse_register_list): Correct error string.
 364
 365 2011-05-12  Quentin Neill  <quentin.neill@amd.com>
 366
 367         * config/tc-i386.c (cpu_arch): Rename PROCESSOR_BDVER1 to PROCESSOR_BD.
 368         (i386_align_code): Ditto
 369
 370 2011-05-12  Matthew Gretton-Dann  <matthew.gretton-dann@arm.com>
 371
 372         PR gas/12715
 373         * config/tc-arm.c (parse_big_immediate):  Fix parsing of 64-bit
 374         immediates on 32-bit hosts.
 375
 376 2011-05-10  Quentin Neill  <quentin.neill@amd.com>
 377
 378         * config/tc-i386.c (cpu_arch): Add bdver2 and rename
 379         PROCESSOR_BDVER1 to PROCESSOR_BDVER.
 380         (i386_align_code): Rename PROCESSOR_BDVER1.
 381         (processor_type): Ditto.
 382         * doc/c-i386.texi: Add bdver2.
 383
 384 2011-05-10  Alan Modra  <amodra@gmail.com>
 385
 386         * dw2gencfi.c (tc_cfi_endproc): Avoid "set but not used" error.
 387
 388 2011-05-09  Paul Brook  <paul@codesourcery.com>
 389
 390         * config/tc-tic6x.c (streq): Define.
 391         (tic6x_get_unwind): New.
 392         (s_tic6x_cantunwind, s_tic6x_handlerdata, s_tic6x_endp,
 393         s_tic6x_personalityindex, s_tic6x_personality): New functions.
 394         (md_pseudo_table): Add "endp", "handlerdata", "personalityindex",
 395         "personality" and "cantunwind".
 396         (tic6x_regname_to_dw2regnum, tic6x_frame_initial_instructions,
 397         tic6x_start_unwind_section, tic6x_unwind_frame_regs,
 398         tic6x_pop_rts_offset_little, tic6x_pop_rts_offset_big,
 399         tic6x_unwind_reg_from_dwarf, tic6x_flush_unwind_word,
 400         tic6x_unwind_byte, tic6x_unwind_2byte, tic6x_unwind_uleb,
 401         tic6x_cfi_startproc, output_exidx_entry, tic6x_output_unwinding,
 402         tic6x_cfi_endproc): New.
 403         * config/tc-tic6x.h (TIC6X_NUM_UNWIND_REGS): Define.
 404         (tic6x_unwind_info): New.
 405         (tic6x_segment_info_type): Add marked_pr_dependency, unwind and
 406         text_unwind.
 407         (TARGET_USE_CFIPOP, tc_regname_to_dw2regnum,
 408         tc_cfi_frame_initial_instructions, DWARF2_DEFAULT_RETURN_COLUMN,
 409         DWARF2_CIE_DATA_ALIGNMENT, tc_cfi_startproc, tc_cfi_endproc,
 410         tc_cfi_section_name): Define.
 411         * doc/c-tic6x.texi: Document new unwinding directives.
 412         * dw2gencfi.c (tc_cfi_startproc, tc_cfi_endproc): Add default
 413         definitions.
 414         (cfi_insn_data, fde_entry, CFI_adjust_cfa_offset, CFI_return_column,
 415         CFI_rel_offset, CFI_escape, CFI_signal_frame, CFI_val_encoded_addr):
 416         Move to dw2gencfi.h.
 417         (CFI_EMIT_target): Define.
 418         (dot_cfi_sections): Check tc_cfi_section_name.
 419         (dot_cfi_startproc): Use tc_cfi_startproc.
 420         (dot_cfi_endproc): Use tc_cfi_endproc.
 421         * dw2gencfi.h (cfi_insn_data, fde_entry, CFI_adjust_cfa_offset,
 422         CFI_return_column, CFI_rel_offset, CFI_escape, CFI_signal_frame,
 423         CFI_val_encoded_addr):  Move to here from dw2gencfi.c.
 424
 425 2011-05-07  Alan Modra  <amodra@gmail.com>
 426
 427         * dw2gencfi.c (CUR_SEG, SET_CUR_SEG, HANDLED, SET_HANDLED): Define.
 428         Use throughout in place of #if SUPPORT_FRAME_LINKONCE.
 429         (struct fde_entry): Rename cseg to cur_seg.
 430         (cfi_change_reg_numbers): Remove ATTRIBUTE_UNUSED.
 431         (get_cfi_seg): Likewise.  Use if (SUPPORT_FRAME_LINKONCE) rather
 432         that #if SUPPORT_FRAME_LINKONCE.
 433         (cfi_finish): Likewise.
 434
 435 2011-05-06  Tristan Gingold  <gingold@adacore.com>
 436
 437         * read.c (s_comm_internal): Remove code for OBJ_VMS.
 438         (s_data): Ditto.
 439         (s_text): Ditto.
 440         * write.c (write_object_file): Ditto.
 441         * symbols.c (define_sym_at_dot): Ditto.
 442         (colon): Ditto.
 443
 444 2011-05-05  Alan Modra  <amodra@gmail.com>
 445
 446         * dw2gencfi.c (SUPPORT_FRAME_LINKONCE): Define.  Use throughout
 447         file to conditionally compile code added 2011-04-26.
 448         (cfi_change_reg_numbers): Add ATTRIBUTE_UNUSED on params only used
 449         when SUPPORT_FRAME_LINKONCE.
 450         (get_cfi_seg): Likewise.  Reintroduce old code for when not
 451         SUPPORT_FRAME_LINKONCE.
 452         (cfi_finish): Move get_cfi_seg calls out of loop when not
 453         SUPPORT_FRAME_LINKONCE.  Avoid unused var warning.
 454
 455 2011-05-03  Paul Brook  <paul@codesourcery.com>
 456
 457         * config/tc-tic6x.c (s_ehtype): New function.
 458         (md_pseudo_table): Add "ehtype".
 459         (tic6x_fix_adjustable, md_apply_fix): BFD_RELOC_C6000_EHTYPE.
 460         * doc/c-tic6x.texi: Document .ehtype directive.
 461
 462 2011-04-26  Kai Tietz  <ktietz@redhat.com>
 463
 464         * dw2gencfi.c (dwcfi_seg_list): New struct.
 465         (dwcfi_hash): New static hash variable.
 466         (get_debugseg_name): New.
 467         (alloc_debugseg_item): New.
 468         (make_debug_seg): New.
 469         (dwcfi_hash_insert): New.
 470         (dwcfi_hash_find): New.
 471         (dwcfi_hash_find_or_make): New.
 472         (cfi_insn_data): New member cur_seg.
 473         (cie_entry): Likewise.
 474         (fde_entry): New cseg and handled members.
 475         (alloc_fde_entry): Initialize cseg member.
 476         (alloc_cfi_insn_data): Initialize cur_seg member.
 477         (dot_cfi_sections): Compare for beginning of
 478         section names via strncmp.
 479         (get_cfi_seg): New.
 480         (cfi_finish): Treat link-once sections.
 481         (is_now_linkonce_segment): New local helper.
 482         (output_cie): Ignore cie entries not member of current
 483         segment.
 484         (output_fde): Likewise.
 485         (select_cie_for_fde): Likewise.
 486         (cfi_change_reg_numbers): Add new argument for current segment
 487         and ignore insn elements, if not part of current segment.
 488         * ehopt.c (get_cie_info): Use strncmp for
 489         section name matching.
 490         (heck_eh_frame): Likewise.
 491
 492 2011-04-20  Catherine Moore  <clm@codesourcery.com>
 493             David Ung <davidu@mips.com>
 494
 495         * config/mips.c (mips_cl_insn): Add new field complete_p.
 496         (create_insn): Initialize complete_p to zero.
 497         (BASE_REG_EQ): New.
 498         (fix_24k_align_to): New.
 499         (fix_24k_store_info): Declare.
 500         (fix_24k_sort): New.
 501         (fix_24k_record_store_info): New.
 502         (nops_for_24k): New.
 503         (nops_for_insn): Call nops_for_24k.
 504         (append_insn): Move O_constant expression handling.
 505
 506 2011-04-20  Alan Modra  <amodra@gmail.com>
 507
 508         * hash.c (set_gas_hash_table_size): Use bfd_hash_set_default_size.
 509         (hash_new_sized): New function, split out from..
 510         (hash_new): ..here.
 511
 512 2011-04-19  Nick Clifton  <nickc@redhat.com>
 513
 514         * config/tc-arm.c (v7m_psrs): Revert previous delta.
 515
 516 2011-04-18  Julian Brown  <julian@codesourcery.com>
 517             Nick Clifton  <nickc@redhat.com>
 518
 519         * config/tc-arm.c (parse_psr): Use selected_cpu not cpu_variant to
 520         detect M-profile targets.
 521         (do_t_swi): Exclude v7 and higher variants from arm_ext_os test.
 522         (v7m_psrs): Fix typo: basepri_max should be basepri_mask.
 523
 524 2011-04-14  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>
 525
 526         * config/tc-s390.c (s390_machine): New prototype.
 527         (md_pseudo_table): New pseudo-op .machine.
 528         (s390_opcode_hash): Initialize to NULL.
 529         (s390_parse_cpu): New function.
 530         (md_parse_option): Use s390_parse_cpu.
 531         (s390_setup_opcodes): New function.
 532         (md_begin): Use s390_setup_opcodes.
 533         (s390_machine): New hook handling the new .machine pseudo.
 534
 535         * doc/c-s390.texi: Document the new pseudo op .machine.
 536
 537 2011-04-12  H.J. Lu  <hongjiu.lu@intel.com>
 538
 539         * config/tc-i386.c (i386_mach): Start error message with lower
 540         case.
 541         (md_begin): Likewise.
 542         (md_parse_option): Likewise.
 543         (i386_target_format): Likewise.
 544         (check_byte_reg): Likewise.
 545         (check_long_reg): Likewise.
 546         (check_qword_reg): Likewise.
 547         (check_word_reg): Likewise.
 548
 549 2011-04-12  Nick Clifton  <nickc@redhat.com>
 550
 551         PR gas/12532
 552         * config/tc-arm.c (relax_branch): Do not relax branches to
 553         preemptable global symbols.
 554
 555 2011-04-11  Julian Brown  <julian@codesourcery.com>
 556
 557         * config/tc-arm.c (parse_psr): Add LHS argument. Improve support
 558         for *APSR bitmasks.
 559         (operand_parse_code): Replace OP_PSR with OP_wPSR and OP_rPSR.
 560         Remove OP_RVC_PSR.
 561         (parse_operands): Likewise.
 562         (do_mrs): Tweak error message for constraint.
 563         (do_t_mrs): Update constraints for changes to APSR support.
 564         (do_t_msr): Likewise. Don't set PSR_f flag here.
 565         (psrs): Remove "g", "nzcvq", "nzcvqg".
 566         (insns): Tweak entries for msr and mrs instructions.
 567
 568 2011-04-11  Kai Tietz  <ktietz@redhat.com>
 569
 570         * config/tc-i386.c (x86_cons): Initialize adjust with zero.
 571
 572 2011-04-11  Nick Clifton  <nickc@redhat.com>
 573
 574         * config/tc-i386.c (x86_cons): Define even for non-ELF targets.
 575         * config/tc-i386.h (x86_cons): Always prototype.
 576
 577         * config/tc-cr16.c (getprocregp_image): Fix type of 'r' parameter
 578         in order to avoid a compile time warning.
 579         (getprocreg_image): Likewise.
 580
 581 2011-04-11  Alan Modra  <amodra@gmail.com>
 582
 583         * config/tc-cr16.c (getprocreg_image): Correct range check.
 584         (getprocregp_image): Likewise.
 585
 586 2011-04-06  Joseph Myers  <joseph@codesourcery.com>
 587
 588         * configure.tgt (strongarm*be, strongarm*b, strongarm*,
 589         xscale*be|xscale*b, xscale*): Remove architectures.
 590         (thumb-*-coff, thumb-*-rtems*, thumb-*-elf, thumb-epoc-pe,
 591         thumb-*-pe, xscale-*-coff, xscale-*-elf): Remove targets.
 592
 593 2011-04-01  Tristan Gingold  <gingold@adacore.com>
 594
 595         * config/tc-ia64.c (md_apply_fix): Add a cast to avoid a warning.
 596
 597 2011-03-31  Bernd Schmidt  <bernds@codesourcery.com>
 598
 599         * config/tc-tic6x.c (sbss_section, scom_section, scom_symbol): New
 600         static variables.
 601         (md_begin): Initialize them.
 602         (s_tic6x_scomm): New static function.
 603         (md_pseudo_table): Add "scomm".
 604         (tc_gen_reloc): Really undo all adjustments made by
 605         bfd_install_relocation.
 606         * doc/c-tic6x.texi: Document the .scomm directive.
 607
 608 2011-03-31  Tristan Gingold  <gingold@adacore.com>
 609
 610         * dwarf2dbg.c (DWARF2_VERSION): Define.
 611         (out_debug_line): Use it.
 612         (out_debug_aranges): Ditto.
 613         (out_debug_info): Ditto.
 614         * config/tc-ia64.h (DWARF2_VERSION): Override it.
 615
 616 2011-03-30  Michael Snyder  <msnyder@vmware.com>
 617
 618         * obj-elf.c (obj_elf_section): Free malloced name.
 619         * macro.c (get_any_string): Free malloced br_buf.
 620         (do_formals): Free 'formal'.
 621
 622 2011-03-30  Tristan Gingold  <gingold@adacore.com>
 623
 624         * config/tc-ppc.c (ppc_frob_symbol): Convert stsym symbols value
 625         to offset only if within is set.
 626         (ppc_stabx): Reformat.  For stsym stabs, add a check and set
 627         within only for symbols.
 628
 629 2011-03-29  Richard Henderson  <rth@redhat.com>
 630
 631         PR 12610
 632         * config/tc-alpha.c (s_alpha_align): Don't auto-align a previous
 633         label; zap alpha_insn_label.
 634
 635 2011-03-29  H.J. Lu  <hongjiu.lu@intel.com>
 636
 637         * config/tc-i386.c (handle_quad): Properly handle multiple
 638         operands.
 639
 640 2011-03-29  Mike Frysinger  <vapier@gentoo.org>
 641
 642         * config/bfin-parse.y (BYTEUNPACK): Return yyerror when dest
 643         reg $2 is the same as dest reg $4.
 644
 645 2011-03-29  Mike Frysinger  <vapier@gentoo.org>
 646
 647         * config/bfin-parse.y (BYTEOP16M): Return yyerror when dest
 648         reg $2 is the same as dest reg $4.
 649
 650 2011-03-29  Mike Frysinger  <vapier@gentoo.org>
 651
 652         * config/bfin-parse.y (BYTEOP16P): Return yyerror when dest
 653         reg $2 is the same as dest reg $4.
 654
 655 2011-03-28  Mike Frysinger  <vapier@gentoo.org>
 656
 657         * config/bfin-parse.y (16bit acc add): Return yyerror when dest
 658         reg $1 is the same as dest reg $7.
 659
 660 2011-03-28  H.J. Lu  <hongjiu.lu@intel.com>
 661
 662         * config/tc-i386.c (handle_quad): New.
 663         (md_pseudo_table): Add "quad".
 664
 665 2011-03-26  John Marino  <binutils@marino.st>
 666
 667         * configure.tgt: Fix support for *-*-dragonfly*.
 668         * config/tc-i386.c: define SVR4_COMMENT_CHARS for dragonfly.
 669         * config/te-dragonfly.h: New file.
 670
 671 2011-03-24  Eric B. Weddington  <eric.weddington@atmel.com>
 672
 673         * config/tc-avr.c (mcu_types): Add new devices: atmega325pa,
 674         atmega3250pa, atmega3290pa, atmega16hvbrevb, atmega32hvbrevb,
 675         at90pwm161.
 676         * doc/c-avr.texi: Document new device names.
 677
 678 2011-03-24  Mike Frysinger  <vapier@gentoo.org>
 679
 680         * config/bfin-parse.y (dual 32bit add/sub): Return yyerror when dest
 681         reg $1 is the same as dest reg $7.
 682         (quad 16bit add/sub): Return yyerror when dest reg $1 is the same as
 683         dest reg $7.
 684
 685 2011-03-24  Mike Frysinger  <vapier@gentoo.org>
 686
 687         * config/bfin-parse.y (check_macfuncs): Clarify error message when
 688         P is mismatched.  Check destination regno are off by one when P is
 689         set, or are equal when P is not set.
 690
 691 2011-03-23  Mike Frysinger  <vapier@gentoo.org>
 692
 693         * config/bfin-parse.y (SEARCH): Return yyerror when dest reg $2 is
 694         the same as dest reg $4.
 695         (BITMUX): Return yyerror when dest reg $3 is the same as dest reg $5.
 696
 697 2011-03-23  Eric B. Weddington  <eric.weddington@atmel.com>
 698
 699         * config/tc-avr.c (mcu_types): Add new xmega devices: atxmega64a1u,
 700         atxmega128a1u, atxmega16x1, atxmega32x1, atxmega128b1, atxmega256a3bu.
 701         * doc/c-avr.texi: Document new device names.
 702
 703 2011-03-22  Eric B. Weddington  <eric.weddington@atmel.com>
 704
 705         * config/tc-avr.c (struct avr_opcodes_s): Add opcode field.
 706         (AVR_INSN): Change definition to match.
 707         (avr_opcodes): Likewise, change to match.
 708         (mcu_types): Add XMEGA architecture names and new XMEGA device names.
 709         (md_show_usage): Add XMEGA architecture names.
 710         (avr_operand): Add 'E' constraint for DES instruction of XMEGA devices.
 711         Add support for SPM Z+ instruction.
 712         * doc/c-avr.texi: Add documentation for XMEGA architectures and
 713         devices.
 714
 715 2011-03-21  Eric B. Weddington  <eric.weddington@atmel.com>
 716
 717         * config/tc-avr.c (md_show_usage): Add "Assembler" text to output.
 718
 719 2011-03-18  Alan Modra  <amodra@gmail.com>
 720
 721         * config/obj-elf.c (elf_frob_symbol): Report S_SET_SIZE symbol
 722         on .size expression errors rather than symbols in the size expression.
 723
 724 2011-03-18  Alan Modra  <amodra@gmail.com>
 725
 726         * input-scrub.c (line_numberT): Delete.
 727         (input_scrub_close): Reset line counters.
 728         * messages.c (as_show_where): Don't print invalid line number.
 729         (as_warn_internal, as_bad_internal): Likewise.
 730
 731 2011-03-18  Alan Modra  <amodra@gmail.com>
 732
 733         * read.c (read_a_source_file): Remove md_after_pass_hook.
 734         Move "quit" label before set of dot_symbol.
 735         * config/tc-d10v.h (md_after_pass_hook): Don't define.
 736         * config/tc-d30v.h (md_after_pass_hook): Likewise.
 737         * config/tc-m32r.h (md_after_pass_hook): Likewise.
 738         (md_cleanup): Define to call m32r_fill_insn.
 739
 740 2011-03-18  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>
 741
 742         * config/tc-s390.c (md_parse_option): Add -march=all option which
 743         switches to the highest available CPU.
 744
 745 2011-03-17  Alan Modra  <amodra@gmail.com>
 746
 747         PR 12569
 748         * expr.c (operand): Correct passing of "mode" to expr.
 749         * read.c (do_org): Allow expr_section.
 750         (get_known_segmented_expression): Don't assert anything about the
 751         segment.
 752
 753 2011-03-16  H.J. Lu  <hongjiu.lu@intel.com>
 754
 755         * as.c (show_usage): Add --size-check=.
 756         (parse_args): Add and handle OPTION_SIZE_CHECK.
 757
 758         * as.h (flag_size_check): New.
 759
 760         * config/obj-elf.c (elf_frob_symbol): Use as_bad to report
 761         bad .size directive only for --size-check=error.
 762
 763         * doc/as.texinfo: Document --size-check=.
 764
 765 2011-03-14  Mike Frysinger  <vapier@gentoo.org>
 766
 767         * config/tc-bfin.c (bfin_cpus[]): Add 0.4 for
 768         bf542/bf544/bf547/bf548/bf549.
 769
 770 2011-03-14  Richard Sandiford  <richard.sandiford@linaro.org>
 771
 772         * config/tc-arm.c (md_pcrel_from_section): Use S_FORCE_RELOC to
 773         determine whether a relocation is needed.
 774         (md_apply_fix, arm_apply_sym_value): Likewise.
 775
 776 2011-03-14  Richard Sandiford  <richard.sandiford@linaro.org>
 777
 778         * config/tc-arm.c (arm_adjust_symtab): Set the branch type
 779         for Thumb symbols.
 780
 781 2011-03-11  Nick Clifton  <nickc@redhat.com>
 782
 783         * remap.c (remap_debug_filename): Always allocate a buffer for the
 784         returned pointer.
 785         * stabs.c (stabs_generate_asm_file): Free the pointer returned by
 786         remap_debug_filename.
 787
 788 2011-03-10  Michael Snyder  <msnyder@vmware.com>
 789
 790         Revert the following change:
 791         * dwarf2dbg.c (out_file_list): Free malloced 'dir'.
 792         (out_debug_info): Free malloced 'dirname' and 'comp_dir'.
 793
 794 2011-03-10  Alan Modra  <amodra@gmail.com>
 795
 796         * gas/config/obj-elf.h (ELF_TARGET_SYMBOL_FIELDS,
 797         TARGET_SYMBOL_FIELDS): Don't define.
 798         * gas/config/tc-arc.c (arc_common): Use correct symbol "local" field.
 799
 800 2011-03-09  Michael Snyder  <msnyder@vmware.com>
 801
 802         * dwarf2dbg.c (out_file_list): Free malloced 'dir'.
 803         (out_debug_info): Free malloced 'dirname' and 'comp_dir'.
 804         (emit_fixed_inc_line_addr): Assign instead of conditional in
 805         assert.
 806
 807 2011-03-05  H.J. Lu  <hongjiu.lu@intel.com>
 808
 809         * config/obj-elf.c (elf_frob_symbol): Mention symbol name in
 810         non-constant .size expression.
 811
 812 2011-03-02  Nick Clifton  <nickc@redhat.com>
 813
 814         * ecoff.c: Incldue filenames.h
 815
 816 2011-02-28  Kai Tietz  <kai.tietz@onevision.com>
 817
 818         * depend.c (register_dependency): Use filename_(n)cmp.
 819         * dwarf2dbg.c (get_filenum): Likewise.
 820         * ecoff.c (add_file): Likewise.
 821         (ecoff_generate_asm_lineno): Likewise.
 822         * input-scrub.c (new_logical_line_flags): Likewise.
 823         * listing.c (file_info): Likewise.
 824         (listing_newline): Likewise.
 825         * remap.c (remap_debug_filename): Likewise.
 826         * stabs.c (generate_asm_file): Likewise.
 827         (stabs_generate_asm_lineno): Likewise.
 828
 829 2011-02-28  Maciej W. Rozycki  <macro@codesourcery.com>
 830
 831         * config/tc-mips.c (append_insn): Disable branch relaxation for
 832         DSP instructions.
 833
 834 2011-02-28  Maciej W. Rozycki  <macro@codesourcery.com>
 835
 836         * config/tc-mips.c (macro): Handle M_PREF_AB.
 837
 838 2011-02-28  Maciej W. Rozycki  <macro@codesourcery.com>
 839
 840         * config/tc-mips.c (RELAX_BRANCH_ENCODE): Encode the temporary
 841         register to use.
 842         (RELAX_BRANCH_UNCOND): Adjust accordingly.
 843         (RELAX_BRANCH_LIKELY): Likewise.
 844         (RELAX_BRANCH_LINK): Likewise.
 845         (RELAX_BRANCH_TOOFAR): Likewise.
 846         (RELAX_BRANCH_AT): New macro.
 847         (append_insn): Encode the temporary register to use in standard
 848         MIPS branch relaxation.
 849         (relaxed_branch_length): Update according to changes to
 850         RELAX_BRANCH_ENCODE.
 851         (md_convert_frag): Use the encoded register as the temporary.
 852
 853 2011-02-28  Maciej W. Rozycki  <macro@codesourcery.com>
 854
 855         * config/tc-mips.c (mips_fix_adjustable): On REL targets also
 856         reject PC-relative relocations.
 857
 858 2011-02-28  Maciej W. Rozycki  <macro@codesourcery.com>
 859
 860         * config/tc-mips.c (md_convert_frag): Correct message
 861         capitalization.
 862
 863 2011-02-28  Alan Modra  <amodra@gmail.com>
 864
 865         * symbols.c (report_op_error): Remove unnecessary forward declaration.
 866         Add "op" parameter.  Report operator and operand segments in error
 867         message, not operand symbols.
 868         (resolve_symbol_value): Always set segment for equated symbols, not
 869         just when finalizing.  Adjust report_op_error calls.
 870
 871 2011-02-25  H.J. Lu  <hongjiu.lu@intel.com>
 872
 873         * config/tc-i386.c (reloc): Don't sign-check 4-byte relocations
 874         if 64bit relocations aren't allowed.
 875
 876 2011-02-25  Alan Modra  <amodra@gmail.com>
 877
 878         PR gas/12519
 879         * config/obj-elf.c (elf_frob_symbol): Properly handle size expression.
 880
 881 2011-02-21  Maciej W. Rozycki  <macro@codesourcery.com>
 882
 883         * config/tc-mips.c (mips_ip) <'o'>: Remove duplicate
 884         initialization of offset_reloc.
 885
 886 2011-02-15  Richard Henderson  <rth@redhat.com>
 887
 888         * dw2gencfi.c (dot_cfi_dummy): New.
 889         (cfi_pseudo_table) [!TARGET_USE_CFIPOP]: New.
 890         * read.c (pobegin): Unconditionally call cfi_pop_insert.
 891
 892 2011-02-13  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 893
 894         * configure: Regenerate.
 895
 896 2011-02-13  Mike Frysinger  <vapier@gentoo.org>
 897
 898         * config/bfin-lex.l (BYTEOP2M): Remove tokenization.
 899         * config/bfin-parse.y (BYTEOP2M): Delete token.
 900         (asm_1): Remove BYTEOP2M insn matching.
 901
 902 2011-02-12  Mike Frysinger  <vapier@gentoo.org>
 903
 904         * config/bfin-defs.h: Include opcode/bfin.h.
 905         (M_S2RND, M_T, M_W32, M_FU, M_TFU, M_IS, M_ISS2, M_IH, M_IU): Delete.
 906
 907 2011-02-11  Mike Frysinger  <vapier@gentoo.org>
 908
 909         * doc/c-bfin.texi (Instruction Delimiting): Fix occur typo.
 910         (Modify Registers): Fix subtracted typo.
 911         (.byte2): Extend and swap descriptions with .byte4.
 912         (.byte4): Extend and swap descriptions with .byte2.
 913         (.db, .dw, .dd): Document behavior.
 914
 915 2011-02-11  Mike Frysinger  <vapier@gentoo.org>
 916
 917         * config/bfin-parse.y (TESTSET): Reject REG_SP and REG_FP.
 918
 919 2011-02-11  Alan Modra  <amodra@gmail.com>
 920
 921         * doc/c-ppc.texi (PowerPC-Opts <-nops>): Clarify.
 922
 923 2011-02-10  Alan Modra  <amodra@gmail.com>
 924
 925         * doc/as.texinfo (Overview): Add missing markup around Blackfin
 926         and PowerPC options.
 927
 928 2011-02-10  Alan Modra  <amodra@gmail.com>
 929
 930         * config/tc-ppc.c (md_show_usage): Remove -l and -b.  Add -K PIC.
 931         * doc/as.texinfo: Refer to and include c-ppc.texi for PowerPC options.
 932         (Overview <Target PowerPC options>): Add a number of missing options.
 933         * doc/c-ppc.texi: Likewise.  Add markup for use in manpage generation.
 934
 935 2011-02-08  H.J. Lu  <hongjiu.lu@intel.com>
 936
 937         PR gas/6957
 938         * config/tc-i386.c (i386_align_code): Use f32_patt when tuning
 939         for i686.
 940
 941 2011-02-08  H.J. Lu  <hongjiu.lu@intel.com>
 942
 943         * config/tc-i386.c (set_cpu_arch): Also update cpu_arch_isa_flags
 944         for ISA extensions.
 945         (md_parse_option): Likewise.
 946
 947 2011-02-04  Bernd Schmidt  <bernds@codesourcery.com>
 948
 949         * doc/as.texinfo (Target TIC6X options): Don't mention "-matomic".
 950         * doc/c-tic6x.texi (TIC6X Directives): Don't mention ".atomic".
 951         (TIC6X Options): Don't mention "-matomic".
 952         * config/tc-tic6x.c (OPTION_MATOMIC, OPTION_MNO_ATOMIC): Delete.
 953         (md_longopts): Remove corresponding entries.
 954         (md_parse_option): Don't handle them.
 955         (md_show_usage): Don't document them.
 956         (tic6x_atomic): Delete variable.
 957         (tic6x_update_features): Always copy tic6x_arch_enable to
 958         tic6x_features.
 959         (tic6x_arch_enable): Remove references to TIC6X_INSN_ATOMIC.
 960         (s_tic6x_atomic, s_tic6x_noatomic): Remove functions.
 961         (md_pseudo_table): Remove ".atomic" and ".noatomic".
 962
 963 2011-01-31  Nick Clifton  <nickc@redhat.com>
 964
 965         * write.c (write_contents): Include output file name and bfd error
 966         value when reporting the inability to write to the output file.
 967         * config/tc-rx.c (rx_handle_align): Do not insert NOPs into align
 968         frag that has a non-zero fill value.
 969
 970 2011-01-27  DJ Delorie  <dj@redhat.com>
 971
 972         * config/tc-rx.c (md_convert_frag): If we can't compute the target
 973         address, zero out the values stored in the object file to make
 974         objdump's output consistent.
 975
 976 2011-01-26  Kai Tietz  <kai.tietz@onevision.com>
 977
 978         * config/tc-i386.c (md_begin): Set for x64 windows COFF target
 979         x86_dwarf2_return_column to 32.
 980
 981 2011-01-20  Nick Clifton  <nickc@redhat.com>
 982
 983         PR gas/12384
 984         * config/tc-h8300.c (constant_fits_width_p): Use correct type for
 985         comparison.
 986
 987 2011-01-18  H.J. Lu  <hongjiu.lu@intel.com>
 988
 989         * write.c (compress_debug): Return if section size is smaller
 990         than 32 bytes.
 991
 992 2011-01-18  H.J. Lu  <hongjiu.lu@intel.com>
 993
 994         PR gas/12409
 995         * write.c (compress_debug): Return if section size is 0.
 996
 997 2011-01-18  Mingfeng Wu  <mingfeng@faraday-tech.com>
 998
 999         * config/tc-arm.c (arm_cpus): Add Faraday ARMv5TE compatible
1000         cores: fa606te, fa616te, fmp626.  Modify the VFP of fa626te.
1001         * doc/c-arm.texi (ARM Options): Add -mcpu={fa606te, fa616te,
1002         fmp626} options.
1003
1004 2011-01-18  Nick Clifton  <nickc@redhat.com>
1005
1006         PR gas/12390
1007         * doc/all.texi: Add NS32K
1008         * doc/as.texinfo: Remove target specific details of which
1009         characters act as comment initiators and statement separators into
1010         individual target specific files.
1011         * doc/c-alpha.texi (Alpha-Chars): Document special behaviour of
1012         the hash character at the start of a line.
1013         * doc/c-arm.texi (ARM-Chars): Likewise.
1014         * doc/c-avr.texi (AVR-Chars): Likewise.
1015         * doc/c-d10v.texi (D10V-Chars): Likewise.
1016         * doc/c-d30v.texi (D30V-Chars): Likewise.
1017         * doc/c-mmix.texi (MMIX-Chars): Likewise.
1018         * doc/c-s390.texi (s390 characters): Likewise.
1019         * doc/c-sh.texi (SH-Chars): Likewise.
1020         * doc/c-sh64.texi (SH64-Chars): Likewise.
1021         * doc/c-sparc.texi (SPARC-Chars): Likewise.
1022         * doc/c-tic6x.texi (TIC6X Syntax): Likewise.
1023         * doc/c-xtensa.texi (Xtensa Syntax): Likewise.
1024         * doc/c-z80.texi (Z80-Chars): Likewise.
1025         * doc/c-z8k.texi (Z8000-Chars): Likewise.
1026         * doc/c-pdp11.texi (PDP11-Syntax): Document line separator character.
1027         * doc/c-arc.texi (ARC-Chars): Fill in this subsection.
1028         * doc/c-bfin.texi (Blackfin Syntax): Document line comment and
1029         line separator characters.
1030         * doc/c-cr16.texi (CR16 Syntax): Likewise.
1031         * doc/c-i386.texi (i386-Chars): Likewise.
1032         * doc/c-i860.texi (i860-Chars): Likewise.
1033         * doc/c-i960.texi (i960-Chars): Likewise.
1034         * doc/c-ip2k.texi (IP2K-Chars): Likewise.
1035         * doc/c-lm32.texi (LM32-Chars): likewise.
1036         * doc/c-m32c.texi (M32C-Chars): Likewise.
1037         * doc/c-m68hc11.texi (M68HC11-syntax): Likewise.
1038         * doc/c-m68k.texi (M68K-Chars): Likewise.
1039         * doc/c-microblaze.texi (MicroBlaze-Chars): Likewise.
1040         * doc/c-msp430.texi (MSP430-Chars): Likewise.
1041         * doc/c-mt.texi (MT-Chars): Likewise.
1042         * doc/c-ns32k.texi (NS32K-Chars): Likewise.
1043         * doc/c-pj.texi (PJ-Chars): Likewise.
1044         * doc/c-ppc.texi (PowerPC-Chars): Likewise.
1045         * doc/c-rx.texi (RX-Chars): Likewise.
1046         * doc/c-score.texi (SCORE-Chars): Likewise.
1047         * doc/c-tic54x.texi (TIC54X-Chars): Likewise.
1048         * doc/c-v850.texi (V850-Chars): Likewise.
1049         * doc/c-vax.texi (VAX-Chars): Likewise.
1050         * doc/c-xc16x.texi (xc16x-Chars): Likewise.
1051
1052 2011-01-17  Quentin Neill  <quentin.neill@amd.com>
1053
1054         * config/tc-i386.c (cpu_arch): Add CPU_TBM_FLAGS.
1055
1056         * doc/c-i386.texi (i386-TBM): New section.
1057
1058 2011-01-16  H.J. Lu  <hongjiu.lu@intel.com>
1059
1060         * config/tc-i386.c (disallow_64bit_disp): Renamed to ...
1061         (disallow_64bit_reloc): This.
1062         (md_assemble): Don't check movabs for x32 mode here.
1063         (i386_target_format): Updated.
1064         (tc_gen_reloc): Check if 64bit relocations are allowed.
1065
1066 2011-01-15  H.J. Lu  <hongjiu.lu@intel.com>
1067
1068         * config/tc-i386.c (disallow_64bit_disp): New.
1069         (x86_elf_abi): Replace X86_64_LP64_ABI/X86_64_ILP32_ABI with
1070         X86_64_ABI/X86_64_X32_ABI.
1071         (md_assemble): Don't allow movabs with relocation in x32 mode.
1072         (i386_target_format): Updated.
1073
1074 2011-01-14  H.J. Lu  <hongjiu.lu@intel.com>
1075
1076         * config/tc-i386.c (OPTION_N32): Renamed to ...
1077         (OPTION_X32): This.
1078         (md_longopts): Replace n32 with x32.
1079         (md_parse_option): Updated.
1080         (md_show_usage): Likewise.
1081
1082         * doc/c-i386.texi: Replace --n32 with --x32.
1083
1084 2011-01-11  Mingjie Xing  <mingjie.xing@gmail.com>
1085
1086         * config/tc-mips.c (mips_ip): Update error messages.  Take an
1087         unadjusted offset for "+c" argument.
1088
1089 2011-01-10  Nick Clifton  <nickc@redhat.com>
1090
1091         * config/tc-i386.c (x86_elf_abi): Only define for targets that use
1092         it.
1093
1094 2011-01-10  Nick Clifton  <nickc@redhat.com>
1095
1096         * config/tc-arm.c (s_arm_tls_desceq): Move code into ELF-only
1097         part of the file.
1098
1099 2011-01-10  Nathan Sidwell  <nathan@codesourcery.com>
1100             Glauber de Oliveira Costa  <glommer@gmail.com>
1101
1102         * doc/c-arm.texi: Document TLSDESC and TLSCALL relocations, and
1103         .tlsdescseq directive.
1104         * config/tc-arm.c (arm_typed_reg_parse): Check for potential reloc
1105         following a symbol.
1106         (s_arm_tls_descseq): New directive.
1107         (md_pseudo_table): Add it.
1108         (encode_branch): Allow TLS_CALL relocs too.
1109         (do_t_blx, do_t_branch23): Use encode_branch.
1110         (reloc_names): Add tlsdesc and tlscall.
1111         (md_apply_fix): Process tls desc relocations.
1112         (tc_gen_reloc): Likewise.
1113         (arm_fix_adjustable): Likewise.
1114
1115 2011-01-07  Quentin Neill  <quentin.neill@amd.com>
1116
1117         * config/tc-i386.c (cpu_arch): Add CPU_BMI_FLAGS.
1118
1119         * doc/c-i386.texi (i386-BMI): New section.
1120
1121 2011-01-06  Paul Koning  <ni1d@arrl.net>
1122
1123         * config/tc-pdp11.c (parse_op_no_deferred): Allow PC-relative
1124         references to absolute addresses.
1125
1126 2011-01-05  DJ Delorie  <dj@redhat.com>
1127
1128         * config/tc-rx.c (tc_gen_reloc): Emit an RX_OP_NEG expression
1129         instead of an RH_NEG32 one.
1130
1131 2011-01-05  Jonathan Wakely  <jwakely.gcc@gmail.com>
1132
1133         * doc/c-i386.texi: Clarify --n32.
1134
1135 2011-01-04  H.J. Lu  <hongjiu.lu@intel.com>
1136
1137         * config/tc-i386.c (build_modrm_byte): Allow encoding 32/64bit
1138         integer registers in VEX.vvvv.  Check register-only source
1139         operand when two source operands are swapped.  Properly update
1140         destination when two source operands are swapped.
1141
1142 2011-01-01  H.J. Lu  <hongjiu.lu@intel.com>
1143
1144         * gas.c (parse_args): Update copyright to 2011.
1145
1146 For older changes see ChangeLog-2010
1147 \f
1148 Local Variables:
1149 mode: change-log
1150 left-margin: 8
1151 fill-column: 74
1152 version-control: never
1153 End: