1 2013-05-06 Paul Brook <paul@codesourcery.com>
2 Catherine Moore <clm@codesourcery.com>
5 * config/tc-mips.c (md_pcrel_from): Handle BFD_RELOC_32_PCREL.
6 (limited_pcrel_reloc_p): Likewise.
7 (md_apply_fix): Likewise.
8 (tc_gen_reloc): Likewise.
10 2013-05-06 Richard Sandiford <rdsandiford@googlemail.com>
12 * config/tc-mips.c (limited_pcrel_reloc_p): New function.
13 (mips_fix_adjustable): Adjust pc-relative check to use
16 2013-05-02 Richard Sandiford <rdsandiford@googlemail.com>
18 * config/tc-mips.c (mips_pseudo_table): Add stabd and stabs entries.
19 (s_mips_stab): Do not restrict to stabn only.
21 2013-05-02 Nick Clifton <nickc@redhat.com>
23 * config/tc-msp430.c: Add support for the MSP430X architecture.
24 Add code to insert a NOP instruction after any instruction that
25 might change the interrupt state.
26 Add support for the LARGE memory model.
27 Add code to initialise the .MSP430.attributes section.
28 * config/tc-msp430.h: Add support for the MSP430X architecture.
29 * doc/c-msp430.texi: Document the new -mL and -mN command line
31 * NEWS: Mention support for the MSP430X architecture.
33 2013-05-01 Maciej W. Rozycki <macro@codesourcery.com>
35 * configure.tgt: Replace alpha*-*-linuxecoff* pattern with
36 alpha*-*-linux*ecoff*.
38 2013-04-30 Chao-ying Fu <Chao-ying.Fu@imgtec.com>
40 * config/tc-mips.c (mips_ip): Add sizelo.
41 For "+C", "+G", and "+H", set sizelo and compare against it.
43 2013-04-29 Nick Clifton <nickc@redhat.com>
45 * as.c (Options): Add -gdwarf-sections.
46 (parse_args): Likewise.
47 * as.h (flag_dwarf_sections): Declare.
48 * dwarf2dbg.c (emit_fixed_inc_line_addr): Skip section changes.
49 (process_entries): When -gdwarf-sections is enabled generate
50 fragmentary .debug_line sections.
51 (out_debug_line): Set the section for the .debug_line section end
53 * doc/as.texinfo: Document -gdwarf-sections.
54 * NEWS: Mention -gdwarf-sections.
56 2013-04-26 Christian Groessler <chris@groessler.org>
58 * config/tc-z8k.c (md_parse_option): Set z8k_target_from_cmdline
59 according to the target parameter. Don't call s_segm since s_segm
60 calls bfd_set_arch_mach using stdoutput, but stdoutput isn't
62 (md_begin): Call s_segm according to target parameter from command
65 2013-04-25 Alan Modra <amodra@gmail.com>
67 * configure.in: Allow little-endian linux.
68 * configure: Regenerate.
70 2013-04-24 Sandra Loosemore <sandra@codesourcery.com>
72 * config/tc-nios2.c (nios2_control_register_arg_p): Rename
73 "fstatus" control register to "eccinj".
75 2013-04-19 Kai Tietz <ktietz@redhat.com>
77 * configure.tgt (i386-*-cygwin): Handle x86_64 cygwin.
79 2013-04-15 Julian Brown <julian@codesourcery.com>
81 * expr.c (add_to_result, subtract_from_result): Make global.
82 * expr.h (add_to_result, subtract_from_result): Add prototypes.
83 * config/tc-sh.c (sh_optimize_expr): Use add_to_result,
84 subtract_from_result to handle extra bit of precision for .sleb128
87 2013-04-10 Julian Brown <julian@codesourcery.com>
89 * read.c (convert_to_bignum): Add sign parameter. Use it
90 instead of X_unsigned to determine sign of resulting bignum.
91 (emit_expr): Pass extra argument to convert_to_bignum.
92 (emit_leb128_expr): Use X_extrabit instead of X_unsigned. Pass
93 X_extrabit to convert_to_bignum.
94 (parse_bitfield_cons): Set X_extrabit.
95 * expr.c (make_expr_symbol, expr_build_uconstant, operand):
96 Initialise X_extrabit field as appropriate.
98 (subtract_from_result): New.
100 * expr.h (expressionS): Add X_extrabit field.
102 2013-04-10 Jan Beulich <jbeulich@suse.com>
104 * gas/config/tc-arm.c (encode_arm_addr_mode_3): Only reject base
105 register being PC when is_t or writeback, and use distinct
106 diagnostic for the latter case.
108 2013-04-10 Jan Beulich <jbeulich@suse.com>
110 * gas/config/tc-arm.c (parse_operands): Re-write
112 (do_barrier): Remove bogus constraint().
113 (do_t_barrier): Remove.
115 2013-04-09 Joerg Wunsch <joerg.wunsch@atmel.com>
117 * gas/config/tc-avr.c (mcu_types): Add ATmega64RFR2,
118 ATmega644RFR2, ATmega128RFR2, ATmega1284RFR2, ATmega256RFR2,
120 * gas/doc/c-avr.texi (-mmcu documentation): Likewise.
122 2013-04-09 Jan Beulich <jbeulich@suse.com>
124 * gas/config/tc-arm.c (do_vmrs): Accept all control registers.
125 Use local variable Rt in more places.
126 (do_vmsr): Accept all control registers.
128 2013-04-09 Jan Beulich <jbeulich@suse.com>
130 * gas/config/tc-arm.c (do_neon_mov): Fake an instruction suffix
131 if there was none specified for moves between scalar and core
134 2013-04-09 Jan Beulich <jbeulich@suse.com>
136 * gas/config/tc-arm.c (do_neon_ldx_stx): Reject VSTn in the
139 2013-04-08 Jan Beulich <jbeulich@suse.com>
141 * gas/config/tc-arm.c (do_neon_ldr_str): Correct disgnostics for
144 2013-04-08 Jan Beulich <jbeulich@suse.com>
146 * gas/config/tc-arm.c (reg_names): Convert duplicate SP_fiq
149 2013-04-03 Alan Modra <amodra@gmail.com>
151 * doc/as.texinfo: Add support to generate man options for h8300.
152 * doc/c-h8300.texi: Likewise.
154 2013-03-28 Ramana Radhakrishnan <ramana.radhakrishnan@arm.com>
156 * config/tc-arm.c (arm_cpus): Add support for Cortex-A53 and
159 2013-03-27 Alexis Deruelle <alexis.deruelle@gmail.com>
162 * config/tc-tic6x.c (tic6x_try_encode): Add use of bitfields array.
164 2013-03-26 Nick Clifton <nickc@redhat.com>
167 * listing.c (rebuffer_line): Rewrite to avoid seeking back to the
168 start of the file each time.
171 * config/tc-sparc.h (ELF_TARGET_FORMAT): Set to elf32-sparc for
174 2013-03-26 Douglas B Rupp <rupp@gnat.com>
176 * config/tc-ia64.c (emit_one_bundle): Move last_slot adjustment
179 2013-03-21 Will Newton <will.newton@linaro.org>
181 * config/tc-arm.c (encode_thumb32_addr_mode): Emit an error for all
182 pc-relative str instructions in Thumb mode.
184 2013-03-21 Michael Schewe <michael.schewe@gmx.net>
186 * config/tc-h8300.c (do_a_fix_imm): Add relaxation of mov
187 @(disp:32,ERx) to mov @(disp:16,ERx) insns by new reloc
189 * config/tc-h8300.h: Remove duplicated defines.
191 2013-03-21 Senthil Kumar Selvaraj <senthil_kumar.selvaraj@atmel.com>
194 * tc-avr.c (mcu_has_3_byte_pc): New function.
195 (tc_cfi_frame_initial_instructions): Call it to find return
198 2013-03-20 Alexis Deruelle <alexis.deruelle@gmail.com>
201 * config/tc-tic6x.c (tic6x_try_encode): Handle
202 tic6x_coding_dreg_(msb|lsb) field coding types and use it to
203 encode register pair numbers when required.
205 2013-03-15 Will Newton <will.newton@linaro.org>
207 * config/tc-arm.c (do_neon_ldr_str): Fix error check for PC register
208 in vstr in Thumb mode for pre-ARMv7 cores.
210 2013-03-14 Andreas Schwab <schwab@suse.de>
212 * doc/c-arc.texi (ARC Directives): Revert last change and use
213 @itemize instead of @table.
214 * doc/c-arm.texi (ARM-Instruction-Set): Likewise.
216 2013-03-14 Nick Clifton <nickc@redhat.com>
219 * config/tc-arm.c (do_co_reg): Do not call check_obsolete with a
220 NULL message, instead just check ARM_CPU_IS_ANY directly.
222 2013-03-14 Nick Clifton <nickc@redhat.com>
225 * doc/c-arc.texi (ARC Directives): Use @code instead of @bullet
227 * doc/c-arm.texi (ARM-Instruction-Set): Likewise. Also add text
228 to the @item directives.
229 (ARM-Neon-Alignment): Move to correct place in the document.
230 * doc/c-cr16.texi (CR16 Operand Qualifiers): Fix up table
232 * doc/c-tic54x.texi (TIC54X-Subsyms): Correct use of
235 2013-03-12 Sebastian Huber <sebastian.huber@embedded-brains.de>
237 * config/tc-nios2.c (nios2_consume_arg): Delete 'k' case. Add 'o'
238 case. Add default BAD_CASE to switch.
240 2013-03-11 Sebastian Huber <sebastian.huber@embedded-brains.de>
242 * config/tc-nios2.c (nios2_assemble_args_ds): New function.
243 (nios2_arg_info_structs): Add "d,s" and "d,s,E" entries.
245 2013-03-11 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
247 * config/tc-arm.c (crc_ext_armv8): New feature set.
248 (UNPRED_REG): New macro.
249 (do_crc32_1): New function.
250 (do_crc32b, do_crc32h, do_crc32w, do_crc32cb,
251 do_crc32ch, do_crc32cw): Likewise.
253 (insns): Add entries for crc32 mnemonics.
254 (arm_extensions): Add entry for crc.
256 2013-03-08 Chung-Lin Tang <cltang@codesourcery.com>
258 * write.h (struct fix): Add fx_dot_frag field.
260 * write.c (dot_frag): New variable.
261 (fix_new_internal): Set fx_dot_frag field with dot_frag.
262 (fixup_segment): Base calculation of fx_offset with fx_dot_frag.
263 * expr.c (expr): Save value of frag_now in dot_frag when setting
265 * read.c (emit_expr): Likewise. Delete comments.
267 2013-03-07 H.J. Lu <hongjiu.lu@intel.com>
269 * config/tc-i386.c (flag_code_names): Removed.
270 (i386_index_check): Rewrote.
272 2013-03-05 Yufeng Zhang <yufeng.zhang@arm.com>
274 * config/tc-aarch64.c (aarch64_imm_float_p): Rename 'e' to 'pattern';
276 (aarch64_double_precision_fmovable): New function.
277 (parse_aarch64_imm_float): Add parameter 'dp_p'; call the new
278 function; handle hexadecimal representation of IEEE754 encoding.
279 (parse_operands): Update the call to parse_aarch64_imm_float.
281 2013-02-28 H.J. Lu <hongjiu.lu@intel.com>
283 * config/tc-i386.c (_i386_insn): Replace have_hle with hle_prefix.
284 (check_hle): Updated.
285 (md_assemble): Likewise.
286 (parse_insn): Likewise.
288 2013-02-28 H.J. Lu <hongjiu.lu@intel.com>
290 * config/tc-i386.c (_i386_insn): Add rep_prefix.
291 (md_assemble): Check if REP prefix is OK.
292 (parse_insn): Remove expecting_string_instruction. Set
295 2013-02-28 Yufeng Zhang <yufeng.zhang@arm.com>
297 * config/tc-aarch64.c (aarch64_features): Add the 'crc' option.
299 2013-02-28 Yufeng Zhang <yufeng.zhang@arm.com>
301 * config/tc-aarch64.c (parse_sys_reg): Allow the full range of CRn
302 for system registers.
304 2013-02-27 DJ Delorie <dj@redhat.com>
306 * config/tc-rl78.c (reloc_function): Add %code -> BFD_RELOC_RL78_CODE.
307 (rl78_op): Handle %code().
308 (rl78_cons_fix_new): Likewise, but ignore for 20-bit operands.
309 (tc_gen_reloc): Likwise; convert to a computed reloc.
310 (md_apply_fix): Likewise.
312 2013-02-25 Kaushik Phatak <Kaushik.Phatak@kpitcummins.com>
314 * config/rl78-parse.y: Fix encoding of DIVWU insn.
316 2013-02-25 Terry Guo <terry.guo@arm.com>
318 * config/tc-arm.c (arm_cpus): Add cortex-r7 entry.
319 * doc/c-arm.texi: Add cortex-r7 and missing cortex-r5 to
320 list of accepted CPUs.
322 2013-02-19 H.J. Lu <hongjiu.lu@intel.com>
325 * config/tc-i386.c (cpu_arch): Add ".smap".
327 * doc/c-i386.texi: Document smap.
329 2013-02-18 Maciej W. Rozycki <macro@codesourcery.com>
331 * config/tc-mips.c (s_cpload): Call mips_mark_labels and set
332 mips_assembling_insn appropriately.
333 (s_cpsetup, s_cprestore, s_cpreturn, s_cpadd): Likewise.
335 2013-02-18 Maciej W. Rozycki <macro@codesourcery.com>
337 * config/tc-mips.c (append_insn): Correct indentation, remove
340 2013-02-15 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
342 * config/tc-arm.c (do_neon_mov): Break on NS_NULL.
344 2013-02-15 Sebastian Huber <sebastian.huber@embedded-brains.de>
346 * configure.tgt: Add nios2-*-rtems*.
348 2013-02-14 Yufeng Zhang <yufeng.zhang@arm.com>
350 * config/tc-aarch64.c (md_begin): Change to check if 'name' is
353 2013-02-09 Jürgen Urban <JuergenUrban@gmx.de>
355 * config/tc-mips.c (CPU_HAS_LDC1_SDC1): New macro.
356 (macro): Use it. Assert that trunc.w.s is not used for r5900.
358 2013-02-08 Yi-Hsiu, Hsu <ahsu@marvell.com>
360 * gas/config/tc-arm.c (arm_cpus): Add support for mcpu=marvell-pj4
363 2013-02-06 Sandra Loosemore <sandra@codesourcery.com>
364 Andrew Jenner <andrew@codesourcery.com>
366 Based on patches from Altera Corporation.
368 * Makefile.am (TARGET_CPU_CFILES): Add config/tc-nios2.c.
369 (TARGET_CPU_HFILES): Add config/tc-nios2.h.
370 * Makefile.in: Regenerated.
371 * configure.tgt: Add case for nios2*-linux*.
372 * config/obj-elf.c: Conditionally include elf/nios2.h.
373 * config/tc-nios2.c: New file.
374 * config/tc-nios2.h: New file.
375 * doc/Makefile.am (CPU_DOCS): Add c-nios2.texi.
376 * doc/Makefile.in: Regenerated.
377 * doc/all.texi: Set NIOSII.
378 * doc/as.texinfo (Overview): Add Nios II options.
379 (Machine Dependencies): Include c-nios2.texi.
380 * doc/c-nios2.texi: New file.
381 * NEWS: Note Altera Nios II support.
383 2013-02-06 Alan Modra <amodra@gmail.com>
386 * config/tc-avr.h (TC_VALIDATE_FIX): Mark symbol used by reloc.
387 Don't skip fixups with fx_subsy non-NULL.
388 * config/tc-avr.c (tc_gen_reloc): Don't specially handle fixups
389 with fx_subsy non-NULL.
391 2013-02-04 H.J. Lu <hongjiu.lu@intel.com>
393 * doc/c-metag.texi: Add "@c man" markers.
395 2013-02-04 Alan Modra <amodra@gmail.com>
397 * write.c (fixup_segment): Return void. Delete seg_reloc_count
399 (TC_ADJUST_RELOC_COUNT): Delete.
400 * config/tc-i960.h (TC_ADJUST_RELOC_COUNT): Delete.
402 2013-02-04 Alan Modra <amodra@gmail.com>
404 * po/POTFILES.in: Regenerate.
406 2013-01-30 Markos Chandras <markos.chandras@imgtec.com>
408 * config/tc-metag.c: Make SWAP instruction less permissive with
411 2013-01-29 DJ Delorie <dj@redhat.com>
413 * config/tc-rl78.c (rl78_cons_fix_new): Handle user-specified
414 relocs in .word/.etc statements.
416 2013-01-29 Roland McGrath <mcgrathr@google.com>
418 * config/tc-arm.c (md_apply_fix): Use as_bad_where for "bad
419 immediate value for 8-bit offset" error so it shows line info.
421 2013-01-24 Joseph Myers <joseph@codesourcery.com>
423 * config/tc-ppc.c (md_assemble): Do not generate APUinfo sections
426 2013-01-24 Nick Clifton <nickc@redhat.com>
428 * config/tc-v850.c: Add support for e3v5 architecture.
429 * doc/c-v850.texi: Mention new support.
431 2013-01-23 Nick Clifton <nickc@redhat.com>
434 * config/tc-avr.c: Include dwarf2dbg.h.
436 2013-01-18 H.J. Lu <hongjiu.lu@intel.com>
438 * config/tc-i386.c (reloc): Support size relocation only for ELF.
439 (tc_i386_fix_adjustable): Likewise.
441 (tc_gen_reloc): Likewise.
443 2013-01-17 Yufeng Zhang <yufeng.zhang@arm.com>
445 * config/tc-aarch64.c (output_operand_error_record): Change to output
446 the out-of-range error message as value-expected message if there is
447 only one single value in the expected range.
448 (programmer_friendly_fixup): Remove the handling of 8-bit MOVI with
449 LSL #0 as a programmer-friendly feature.
451 2013-01-16 H.J. Lu <hongjiu.lu@intel.com>
453 * config/tc-i386.c (reloc): Support BFD_RELOC_SIZE32.
454 (tc_i386_fix_adjustable): Keep symbol for BFD_RELOC_32_SIZE and
455 BFD_RELOC_64_SIZE relocations.
456 (lex_got): Support "symbol@SIZE" and don't create GOT symbol
458 (tc_gen_reloc): Resolve BFD_RELOC_SIZE32 and BFD_RELOC_SIZE64
459 relocations against local symbols.
461 2013-01-16 Alan Modra <amodra@gmail.com>
463 * config/tc-ppc.c (md_assemble <TE_PE>): Ignore line after
464 finding some sort of toc syntax error, and break to avoid
465 compiler uninit warning.
467 2013-01-15 H.J. Lu <hongjiu.lu@intel.com>
470 * config/tc-i386.c (lex_got): Increment length by 1 if the
471 relocation token is removed.
473 2013-01-15 Nick Clifton <nickc@redhat.com>
475 * config/tc-v850.c (md_assemble): Allow signed values for
478 2013-01-11 Sean Keys <skeys@ipdatasys.com>
480 * config/tc-xgate.c (md_begin): Fix mistake made when going from
483 2013-01-10 Peter Bergner <bergner@vnet.ibm.com>
485 * doc/as.texinfo (Target PowerPC): Document -mpower8 and -mhtm.
486 * doc/c-ppc.texi (PowerPC-Opts): Likewise.
487 * config/tc-ppc.c (md_show_usage): Likewise.
488 (ppc_handle_align): Handle power8's group ending nop.
490 2013-01-10 Sean Keys <skeys@ipdatasys.com>
492 * config/tc-xgate.c (md_begin): Fix the printing of opcodes so
493 that the assember exits after the opcodes have been printed.
495 2013-01-10 H.J. Lu <hongjiu.lu@intel.com>
497 * app.c: Remove trailing white spaces.
501 * dw2gencfi.c: Likewise.
502 * dwarf2dbg.h: Likewise.
504 * input-file.c: Likewise.
505 * itbl-lex.h: Likewise.
506 * output-file.c: Likewise.
509 * subsegs.c: Likewise.
510 * symbols.c: Likewise.
512 * config/tc-i386.c: Likewise.
513 * doc/Makefile.am: Likewise.
514 * doc/Makefile.in: Likewise.
515 * doc/c-aarch64.texi: Likewise.
516 * doc/c-alpha.texi: Likewise.
517 * doc/c-arc.texi: Likewise.
518 * doc/c-arm.texi: Likewise.
519 * doc/c-avr.texi: Likewise.
520 * doc/c-bfin.texi: Likewise.
521 * doc/c-cr16.texi: Likewise.
522 * doc/c-d10v.texi: Likewise.
523 * doc/c-d30v.texi: Likewise.
524 * doc/c-h8300.texi: Likewise.
525 * doc/c-hppa.texi: Likewise.
526 * doc/c-i370.texi: Likewise.
527 * doc/c-i386.texi: Likewise.
528 * doc/c-i860.texi: Likewise.
529 * doc/c-m32c.texi: Likewise.
530 * doc/c-m32r.texi: Likewise.
531 * doc/c-m68hc11.texi: Likewise.
532 * doc/c-m68k.texi: Likewise.
533 * doc/c-microblaze.texi: Likewise.
534 * doc/c-mips.texi: Likewise.
535 * doc/c-msp430.texi: Likewise.
536 * doc/c-mt.texi: Likewise.
537 * doc/c-s390.texi: Likewise.
538 * doc/c-score.texi: Likewise.
539 * doc/c-sh.texi: Likewise.
540 * doc/c-sh64.texi: Likewise.
541 * doc/c-tic54x.texi: Likewise.
542 * doc/c-tic6x.texi: Likewise.
543 * doc/c-v850.texi: Likewise.
544 * doc/c-xc16x.texi: Likewise.
545 * doc/c-xgate.texi: Likewise.
546 * doc/c-xtensa.texi: Likewise.
547 * doc/c-z80.texi: Likewise.
548 * doc/internals.texi: Likewise.
550 2013-01-10 Roland McGrath <mcgrathr@google.com>
552 * hash.c (hash_new_sized): Make it global.
553 * hash.h: Declare it.
554 * macro.c (define_macro): Use hash_new_sized instead of hash_new,
557 2013-01-10 Will Newton <will.newton@imgtec.com>
559 * Makefile.am: Add Meta.
560 * Makefile.in: Regenerate.
561 * config/tc-metag.c: New file.
562 * config/tc-metag.h: New file.
563 * configure.tgt: Add Meta.
564 * doc/Makefile.am: Add Meta.
565 * doc/Makefile.in: Regenerate.
566 * doc/all.texi: Add Meta.
567 * doc/as.texiinfo: Document Meta options.
568 * doc/c-metag.texi: New file.
570 2013-01-09 Steve Ellcey <sellcey@mips.com>
572 * config/tc-i386.c (md_begin): Remove 'internal Error' from as_fatal
574 * config/tc-mips.c (internalError): Remove, replace with abort.
576 2013-01-08 Yufeng Zhang <yufeng.zhang@arm.com>
578 * config/tc-aarch64.c (parse_operands): Change to compare the result
579 of function call 'parse_sys_reg' with 'PARSE_FAIL' instead of 'FALSE'.
581 2013-01-07 Nick Clifton <nickc@redhat.com>
584 * config/tc-arm.c (skip_past_char): Skip whitespace before the
585 anticipated character.
586 * config/tc-arm.c (parse_address_main): Delete skip of whitespace
587 here as it is no longer needed.
589 2013-01-06 Andreas Schwab <schwab@linux-m68k.org>
591 * doc/c-mips.texi (MIPS Opts): Fix use of @itemx.
592 * doc/c-score.texi (SCORE-Opts): Likewise.
593 * doc/c-tic54x.texi (TIC54X-Directives): Likewise.
595 2013-01-04 Juergen Urban <JuergenUrban@gmx.de>
597 * config/tc-mips.c: Add support for MIPS r5900.
598 Add M_LQ_AB and M_SQ_AB to support large values for instructions
600 (can_swap_branch_p, get_append_method): Detect some conditional
601 short loops to fix a bug on the r5900 by NOP in the branch delay
603 (M_MUL): Support 3 operands in multu on r5900.
604 (M_TRUNCWS): Support trunc.w.s on r5900 in MIPS ISA I.
605 (s_mipsset): Force 32 bit floating point on r5900.
606 (mips_ip): Check parameter range of instructions mfps and mtps on
608 * configure.in: Detect CPU type when target string contains r5900
609 (e.g. mips64r5900el-linux-gnu).
611 2013-01-02 H.J. Lu <hongjiu.lu@intel.com>
613 * as.c (parse_args): Update copyright year to 2013.
615 2013-01-02 Yufeng Zhang <yufeng.zhang@arm.com>
617 * config/tc-aarch64.c (aarch64_cpus): Add entries for "cortex-a53"
620 2013-01-02 Nick Clifton <nickc@redhat.com>
623 * config/tc-arm.c (parse_address_main): Skip whitespace before a
626 For older changes see ChangeLog-2012
628 Copyright (C) 2013 Free Software Foundation, Inc.
630 Copying and distribution of this file, with or without modification,
631 are permitted in any medium without royalty provided the copyright
632 notice and this notice are preserved.
638 version-control: never