gas/ChangeLog

   1 2007-09-08  H.J. Lu  <hongjiu.lu@intel.com>
   2
   3         * configure.in (AC_CHECK_HEADERS): Add limits.h.
   4         * configure: Regenerated.
   5         * config.in: Likewise.
   6
   7         * config/tc-i386.c: Include "opcodes/i386-init.h".
   8         (_i386_insn): Use i386_operand_type for types.
   9         (cpu_arch_flags): Updated to new types with bitfield.
  10         (cpu_arch_tune_flags): Likewise.
  11         (cpu_arch_isa_flags): Likewise.
  12         (cpu_arch): Likewise.
  13         (i386_align_code): Likewise.
  14         (set_code_flag): Likewise.
  15         (set_16bit_gcc_code_flag): Likewise.
  16         (set_cpu_arch): Likewise.
  17         (md_assemble): Likewise.
  18         (parse_insn): Likewise.
  19         (process_operands): Likewise.
  20         (output_branch): Likewise.
  21         (output_jump): Likewise.
  22         (parse_real_register): Likewise.
  23         (mode_from_disp_size): Likewise.
  24         (smallest_imm_type): Likewise.
  25         (pi): Likewise.
  26         (type_names): Likewise.
  27         (pt): Likewise.
  28         (pte): Likewise.
  29         (swap_2_operands): Likewise.
  30         (optimize_imm): Likewise.
  31         (optimize_disp): Likewise.
  32         (match_template): Likewise.
  33         (check_string): Likewise.
  34         (process_suffix): Likewise.
  35         (check_byte_reg): Likewise.
  36         (check_long_reg): Likewise.
  37         (check_qword_reg): Likewise.
  38         (check_word_reg): Likewise.
  39         (finalize_imm): Likewise.
  40         (build_modrm_byte): Likewise.
  41         (output_insn): Likewise.
  42         (disp_size): Likewise.
  43         (imm_size): Likewise.
  44         (output_disp): Likewise.
  45         (output_imm): Likewise.
  46         (gotrel): Likewise.
  47         (i386_immediate): Likewise.
  48         (i386_displacement): Likewise.
  49         (i386_index_check): Likewise.
  50         (i386_operand): Likewise.
  51         (parse_real_register): Likewise.
  52         (i386_intel_operand): Likewise.
  53         (intel_e09): Likewise.
  54         (intel_bracket_expr): Likewise.
  55         (intel_e11): Likewise.
  56         (cpu_arch_flags_not): New.
  57         (cpu_flags_check_x64): Likewise.
  58         (cpu_flags_all_zero): Likewise.
  59         (cpu_flags_not): Likewise.
  60         (i386_cpu_flags_biop): Likewise.
  61         (cpu_flags_biop): Likewise.
  62         (cpu_flags_match); Likewise.
  63         (acc32): New.
  64         (acc64): Likewise.
  65         (control): Likewise.
  66         (reg16_inoutportreg): Likewise.
  67         (disp16): Likewise.
  68         (disp32): Likewise.
  69         (disp32s): Likewise.
  70         (disp16_32): Likewise.
  71         (anydisp): Likewise.
  72         (baseindex): Likewise.
  73         (regxmm): Likewise.
  74         (imm8): Likewise.
  75         (imm8s): Likewise.
  76         (imm16): Likewise.
  77         (imm32): Likewise.
  78         (imm32s): Likewise.
  79         (imm64): Likewise.
  80         (imm16_32): Likewise.
  81         (imm16_32s): Likewise.
  82         (imm16_32_32s): Likewise.
  83         (operand_type): Likewise.
  84         (operand_type_check): Likewise.
  85         (operand_type_match): Likewise.
  86         (operand_type_register_match): Likewise.
  87         (update_imm): Likewise.
  88         (set_code_flag): Also update cpu_arch_flags_not.
  89         (set_16bit_gcc_code_flag): Likewise.
  90         (md_begin): Likewise.
  91         (parse_insn): Use cpu_flags_check_x64 to check 64bit support.
  92         Use cpu_flags_match to match instructions.
  93         (i386_target_format): Update cpu_arch_isa_flags and
  94         cpu_arch_tune_flags to i386_cpu_flags type with bitfield.
  95         (smallest_imm_type): Check cpu_arch_tune to tune for i486.
  96         (match_template): Don't initialize overlap0, overlap1,
  97         overlap2, overlap3 and operand_types.
  98         (process_suffix): Handle crc32 with 64bit register.
  99         (MATCH): Removed.
 100         (CONSISTENT_REGISTER_MATCH): Likewise.
 101
 102         * config/tc-i386.h (arch_entry): Updated to i386_cpu_flags
 103         type.
 104
 105 2007-09-06  H.J. Lu  <hongjiu.lu@intel.com>
 106
 107         * config/tc-i386.c (match_template): Handle invlpga, vmload,
 108         vmrun and vmsave in SVME.
 109         (process_suffix): Likewise.
 110
 111 2007-09-05  H.J. Lu  <hongjiu.lu@intel.com>
 112
 113         * config/tc-i386.c (i386_index_check): Don't use RegRex
 114         on the reg_type field.
 115         (parse_real_register): Use `||' instead of `|'.
 116
 117 2007-09-04  H.J. Lu  <hongjiu.lu@intel.com>
 118
 119         * config/tc-i386.c (process_operands): Remove segment override
 120         check on SVME instructions.
 121         (i386_index_check): Remove memory operand check on SVME
 122         instructions.
 123
 124 2007-09-04  Alan Modra  <amodra@bigpond.net.au>
 125
 126         * config/tc-spu.c (struct spu_insn): Delete "flag".  Add "reloc".
 127         (md_assemble): Update init of insn.  Use insn.reloc instead of
 128         calculating from flag.
 129         (get_imm): Set reloc rather than flag.
 130         (calcop): Formatting.
 131
 132 2007-08-29  Daniel Jacobowitz  <dan@codesourcery.com>
 133
 134         * dwarf2dbg.c (dwarf2_directive_loc): Emit duplicate .loc directives.
 135
 136 2007-08-28  Daniel Jacobowitz  <dan@codesourcery.com>
 137
 138         * doc/c-arc.texi: Fix typo.
 139
 140 2007-08-28  H.J. Lu  <hongjiu.lu@intel.com>
 141
 142         * config/tc-i386.c (process_suffix): Handle cmpxchg8b in
 143         Intel mode.
 144
 145 2007-08-28  Nathan Sidwell  <nathan@codesourcery.com>
 146
 147         * config/tc-m68k.c (mcf52235_ctrl): Add cache registers.
 148         (mcf5253_ctrl): Add RAMBAR, MBAR, MBAR2.
 149         (mcf5407_ctrl): New.
 150         (m68k_cpus): Adjust 5407 entry.
 151
 152 2007-08-28  Maxim Kuvyrkov  <maxim@codesourcery.com>
 153
 154         * config/tc-m68k.c (mcf51qe_ctrl): Define 51QE control registers.
 155         (m68k_cpus): Define 51QE cpu.
 156
 157 2007-08-28  Mark Shinwell  <shinwell@codesourcery.com>
 158             Joseph Myers  <joseph@codesourcery.com>
 159
 160         * as.c (main): Flush stderr before printing listings to ensure
 161         consistent output order across platforms.
 162
 163 2007-08-28  Robert Sebastian Gerus  <arachnist@gmail.com>
 164
 165         * configure.tgt: Add support for i[3-7]86-*-dragonfly*.
 166
 167 2007-08-24  Joseph Myers  <joseph@codesourcery.com>
 168             Paul Brook  <paul@codesourcery.com>
 169
 170         * remap.c: New.
 171         * as.h (remap_debug_filename, add_debug_prefix_map): Declare.
 172         * as.c (show_usage): Document --debug-prefix-map option.
 173         (parse_args): Handle --debug-prefix-map.
 174         * dwarf2dbg.c (out_file_list, out_debug_info): Remap debug paths.
 175         * stabs.c (stabs_generate_asm_file): Remap debug paths.
 176         * Makefile.am (GAS_CFILES): Add remap.c
 177         (GENERIC_OBJS): Add remap.o.
 178         Regenerate dependencies.
 179         * Makefile.in: Regenerate.
 180         * doc/as.texinfo (--debug-prefix-map): Document.
 181
 182 2007-08-24  Aurelien Jarno  <aurel32@debian.org>
 183
 184         * config/tc-arm.c (md_apply_fix): Cast bfd_vma values to long
 185         before printing them.
 186
 187 2007-08-24  Anders Waldenborg  <anders@0x63.nu>
 188             Alan Modra  <amodra@bigpond.net.au>
 189
 190         * config/tc-i386.c (lex_got): Don't scan past a comma.
 191
 192 2007-08-23  Ben Elliston  <bje@au.ibm.com>
 193
 194         * config/tc-ppc.c (parse_cpu): Handle "750cl".
 195         (pre_defined_registers): Add "gqr0" to "gqr7", "gqr.0" to "gqr.7".
 196         (md_show_usage): Document -m750cl.
 197         (md_assemble): Handle two delimiters in succession (eg. `),').
 198         * doc/c-ppc.texi (PowerPC-Opts): Document -m750cl.
 199         * testsuite/gas/ppc/ppc.exp: Run ppc70ps dump tests.
 200         * testsuite/gas/ppc/ppc750ps.s: New file.
 201         * testsuite/gas/ppc/ppc750ps.d: Likewise.
 202
 203 2007-08-23  Ben Elliston  <bje@au.ibm.com>
 204
 205         * doc/c-arm.texi (ARM Directives): Move brackets out of @vars.
 206
 207 2007-08-17  Alan Modra  <amodra@bigpond.net.au>
 208
 209         PR gas/4079
 210         * config/tc-i386.c (x86_cons): Complain about invalid @got etc.
 211         expressions.
 212         (i386_immediate): Detect and complain about more cases of
 213         invalid immediate expressions.  Return failure rather than
 214         converting them to zero.
 215         (i386_displacement): Likewise.
 216
 217 2007-08-17  Alan Modra  <amodra@bigpond.net.au>
 218
 219         * po/Make-in: Add --msgid-bugs-address to xgettext invocation.
 220
 221 2007-08-14  Andreas Schwab  <schwab@suse.de>
 222
 223         * config/tc-ia64.c (tc_gen_reloc): Return NULL if relocation is
 224         unrepresentable.
 225
 226 2007-08-12  Matthias Klose  <doko@ubuntu.com>
 227
 228         * doc/Makefile.am (AM_MAKEINFOFLAGS, TEXI2DVI): Include
 229         $(top_srcdir)/../../bfd/doc.
 230         * doc/Makefile.in: Regenerate.
 231
 232 2007-08-10  Nick Clifton  <nickc@redhat.com>
 233
 234         * NEWS: Add a marker for the 2.18 features.
 235
 236 2007-08-09  Paul Brook  <paul@codesourcery.com>
 237
 238         * config/tc-arm.c (relaxed_symbol_addr): Compensate for alignment.
 239
 240 2007-08-09  H.J. Lu  <hongjiu.lu@intel.com>
 241
 242         * config/tc-i386.c (check_byte_reg): Support pextrb and pinsrb.
 243
 244 2007-07-29  H.J. Lu  <hongjiu.lu@intel.com>
 245
 246         * config/tc-i386.c (check_long_reg): Allow cvtss2si to convert
 247         DWORD memory to Reg64 in Intel synax.
 248         (check_qword_reg): Allow cvtsd2si to convert QWORD memory to
 249         Reg32 in Intel syntax.
 250
 251 2007-07-25  Sterling Augustine  <sterling@tensilica.com>
 252
 253         * config/tc-xtensa.c (xtensa_extui_opcode): New.
 254         (xg_expand_assembly_insn): Check for invalid extui operands.
 255         (md_begin): Initialize xtensa_extui_opcode.
 256
 257 2007-07-24  Nick Clifton  <nickc@redhat.com>
 258
 259         * config/tc-mep.h (skip_whitespace): Remove definition.
 260
 261 2007-07-23  H.J. Lu  <hongjiu.lu@intel.com>
 262
 263         * config/tc-i386.c (cpu_arch): Change i386 to PROCESSOR_I386.
 264         (f32_15): Removed.
 265         (jump_31): New.
 266         (f32_patt): Remove f32_15.
 267         (f16_patt): Likewise.
 268         (i386_align_code): Updated to alt_long_patt for 64bit by
 269         default.
 270
 271         * config/tc-i386.h (processor_type): Add PROCESSOR_I386.
 272
 273 2007-07-23  Evandro Menezes  <evandro.menezes@amd.com>
 274
 275         * config/tc-i386.c (i386_align_code): Enable alignment up to
 276         MAX_MEM_FOR_RS_ALIGN_CODE bytes.  Remove special treatment
 277         for K8.
 278
 279         * config/tc-i386.h (MAX_MEM_FOR_RS_ALIGN_CODE): Changed to 31.
 280
 281 2007-07-20  Nick Clifton  <nickc@redhat.com>
 282
 283         * app.c (do_scrub_chars): Provide a one character buffer to hold a
 284         pushed back newline at the end of an unterminated quoted string.
 285
 286 2007-07-14  Nick Clifton  <nickc@redhat.com>
 287
 288         * config/tc-arm.c (create_register_alias): Return a boolean rather
 289         than an integer.
 290         Check the return value of insert_reg_alias and do not continue to
 291         create aliases once an insertion has failed.
 292         (s_unreq): Delete the all-upper-case and all-lower-case
 293         alternatives as well.
 294
 295 2007-07-12  Kai Tietz   <kai.tietz@onevision.com>
 296
 297         * symbols.c: Print bfd_hostptr_t to file via fprintf_vma.
 298         * write.c: Likewise.
 299
 300 2007-07-11  Daniel Jacobowitz  <dan@codesourcery.com>
 301
 302         * config/tc-mips.c (mips_dwarf2_format, mips_dwarf2_addr_size): Use
 303         HAVE_64BIT_SYMBOLS.
 304
 305 2007-07-04  Richard Sandiford  <richard@codesourcery.com>
 306
 307         * config/tc-mips.c (mips_cpu_info_table): Add new entries for
 308         {24k,24ke,34k,74k}f{2_1,1_1,x}.  Also add an entry for 74kf3_2.
 309         Deprecate *x and *fx.
 310         * doc/c-mips.texi: Document the new CPU arguments.  Deprecate
 311         *x and *fx.
 312
 313 2007-07-04  H.J. Lu  <hongjiu.lu@intel.com>
 314
 315         * config/obj-coff.h (x86_64_target_format): Renamed to ...
 316         (i386_target_format): This
 317         (TARGET_FORMAT): Use i386_target_format.
 318
 319         * config/tc-i386.c (x86_64_target_format): Removed.
 320         (i386_target_format): Handle PE formats.
 321
 322 2007-07-04  Nick Clifton  <nickc@redhat.com>
 323
 324         * symbols.c (symbol_relc_make_value): Use bfd_sprintf_vma in order
 325         to get the right length of printed value.
 326
 327 2007-07-03  Nick Clifton  <nickc@redhat.com>
 328
 329         * COPYING: Replace with GPLv3 text.
 330         * app.c: Update copyright notice to refer to GPLv3.
 331         * as.c, as.h, asintl.h, atof_generic.c, bignum.h, bit_fix.h,
 332         cgen.c, cond.c, debug.c, depend.c, dw2gencfi.c, dw2gencfi.h,
 333         dwarf2dbg.c, dwarf2dbg.h, ecoff.c, ecoff.h, ehopt.c, emul.h,
 334         emul_target.h, expr.c, expr.h, flonum-copy.c, flonum.h,
 335         flonum-konst.c, frags.c, frags.h, hash.c, hash.h, input-file.c,
 336         input-file.h, input-scrub.c, ibtl-lex.h, itbl-lex.l, itbl-ops.c,
 337         itbl-ops.h, itbl-parse.y, listing.c, listing.h, literal.c,
 338         macro.c, messages.c, obj.h, output-file.c, output-file.h, read.c,
 339         read.h, sb.c, sb,h, stabs.c, struc-symbol.h, subsegs.c, subsegs.h,
 340         symbols.c, symbols.h, tc.h, write.c, write.h, config/aout_gnu.h,
 341         config/config/atof-ieee.c, config/atof-vax.c, config/bfin-aux.h,
 342         config/bfin-defs.h, config/bfin-lex.l, config/bfin-parse.y,
 343         config/itbl-mips.h, config/m68k-parse.h, config/m68k-parse.y,
 344         config/obj-aout.c, config/obj-aout.h, config/obj-coff.c,
 345         config/obj-coff.h, config/obj-ecoff.c, config/obj-ecoff.h,
 346         config/obj-elf.c, config/obj-elf.h, config/obj-evax.c,
 347         config/obj-evax.h, config/obj-multi.h, config/obj-som.c,
 348         config/obj-som.h, config/tc-alpha.c, config/tc-alpha.h,
 349         config/tc-arc.c, config/tc-arc.h, config/tc-arm.c,
 350         config/tc-arm.h, config/tc-avr.c, config/tc-avr.h,
 351         config/tc-bfin.c, config/tc-bfin.h, config/tc-cr16.c,
 352         config/tc-cr16.h, config/tc-cris.c, config/tc-cris.h,
 353         config/tc-crx.c, config/tc-crx.h, config/tc-d10v.c,
 354         config/tc-d10v.h, config/tc-d30v.c, config/tc-d30v.h,
 355         config/tc-dlx.c, config/tc-dlx.h, config/tc-fr30.c,
 356         config/tc-fr30.h, config/tc-frv.c, config/tc-frv.h,
 357         config/tc-generic.c, config/tc-generic.h, config/tc-h8300.c,
 358         config/tc-h8300.h, config/tc-hppa.c, config/tc-hppa.h,
 359         config/tc-i370.c, config/tc-i370.h, config/tc-i386.c,
 360         config/tc-i386.h, config/tc-i860.c, config/tc-i860.h,
 361         config/tc-i960.c, config/tc-i960.h, config/tc-ia64.c,
 362         config/tc-ia64.h, config/tc-ip2k.c, config/tc-ip2k.h,
 363         config/tc-iq2000.c, config/tc-iq2000.h, config/tc-m32c.c,
 364         config/tc-m32c.h, config/tc-m32r.c, config/tc-m32r.h,
 365         config/tc-m68hc11.c, config/tc-m68hc11.h, config/tc-m68k.c,
 366         config/tc-m68k.h, config/tc-maxq.c, config/tc-maxq.h,
 367         config/tc-mcore.c, config/tc-mcore.h, config/tc-mep.c,
 368         config/tc-mep.h, config/tc-mips.c, config/tc-mips.h,
 369         config/tc-mmix.c, config/tc-mmix.h, config/tc-mn10200.c,
 370         config/tc-mn10200.h, config/tc-mn10300.c, config/tc-mn10300.h,
 371         config/tc-msp430.c, config/tc-msp430.h, config/tc-mt.c,
 372         config/tc-mt.h, config/tc-ns32k.c, config/tc-ms32k.h,
 373         config/tc-openrisc.c, config/tc-openrisc.h, config/tc-or32.c,
 374         config/tc-or32.h, config/tc-pdp11.c, config/tc-pdp11.h,
 375         config/tc-pj.c, config/tc-pj.h, config/tc-ppc.c, config/tc-ppc.h,
 376         config/tc-s390.c, config/tc-s390.h, config/tc-score.c,
 377         config/tc-score.h, config/tc-sh64.c, config/tc-sh64.h,
 378         config/tc-sh.c, config/tc-sh.h, config/tc-sparc.c,
 379         config/tc-sparc.h, config/tc-spu.c, config/tc-spu.h,
 380         config/tc-tic30.c, config/tc-tic30.h, config/tc-tic4x.c,
 381         config/tc-tic4x.h, config/tc-tic54x.c, config/tc-tic54x.h,
 382         config/tc-v850.c, config/tc-v850.h, config/tc-vax.c,
 383         config/tc-vax.h, config/tc-xc16x.c, config/tc-x16x.h,
 384         config/tc-xstormy16.c, config/tc-xstormy16.h, config/tc-xtensa.c,
 385         config/tc-xtensa.h, config/tc-z80.c, config/tc-z80.h,
 386         config/tc-z8k.c, config/tc-z8k.h, config/te-386bsd.h,
 387         config/te-freebsd.h, config/te-hppa.h, config/te-irix.h,
 388         config/te-netware.h, config/te-sparcaout.h,  config/te-tmips.h,
 389         config/te-vxworks.h, config/vax-inst.h, config/xtensa-istack.h,
 390         config/xtensa-relax.c, config/xtensa-relax.h: Likewise.
 391
 392         * flonum-mult.c: Likewise, and also correct typo referring to
 393         non-existant GNU Assembler General Public License.
 394         * config/tc-m68851.h: Likewise.
 395         * NEWS: Mention the new license.  Also note where the 2.17 release
 396         happened.
 397         * config/e-crisaout.c: Add copyright header.
 398         * config/e-criself.c, config/e-i386aout.c, config/e-i386coff.c,
 399         config/e-i386elf.c, config/e-mipscoff.c, config/e-mipself.c,
 400         config/obj-multi.c, config/te-aix5.h, config/te-armeabi.h,
 401         config/te-armlinuxeabi.h, config/te-dynix.h, config/te-epoc-pe.h,
 402         config/te-generic.h, config/te-gnu.h, config/te-go32.h,
 403         config/te-hppa64.h, config/te-hppalinux64.h, config/te-hpux.h,
 404         config/te-i386aix.h, config/te-ia64aix.h, config/te-interix.h,
 405         config/te-linux.h, config/te-lnews.h, config/te-lynx.h,
 406         config/te-mach.h, config/te-macos.h, config/te-nbsd532.h,
 407         config/te-nbsd.h, config/te-pc532mach.h, config/te-pe.h,
 408         config/te-pep.h, config/te-psos.h, config/te-riscix.h,
 409         config/te-sun3.h, config/te-svr4.h, config/te-symbian.h,
 410         config/te-wince-pe.h: Likewise.
 411
 412 2007-07-03  Nathan Sidwell  <nathan@codesourcery.com>
 413
 414         * config/tc-m68k.c (m68k_ip): Add j & K operand types.
 415         (install_operand): Add E encoding.
 416         (md_begin): Check and skip initial '.' arg character.
 417         (get_num): Add 0..511 case.
 418
 419 2007-07-03  Alan Modra  <amodra@bigpond.net.au>
 420
 421         PR 4713
 422         * config/obj-elf.c (elf_ecoff_set_ext): Make static when OBJ_MAYBE_ELF.
 423         * config/obj-elf.h (obj_ecoff_set_ext): Comment.
 424
 425 2007-07-03  Mikkel Lauritsen  <renard@nospam.dk>
 426
 427         PR 4722
 428         * app.c (do_scrub_chars <state 5>): Check for output buffer full
 429         after memcpy.
 430
 431 2007-07-02  Joseph Myers  <joseph@codesourcery.com>
 432
 433         * config/tc-mips.c (s_dtprelword, s_dtpreldword,
 434         s_dtprel_internal): New.
 435         (mips_pseudo_table): Add .dtprelword and .dtpreldword.
 436         (md_apply_fix): Handle BFD_RELOC_MIPS_TLS_DTPREL32 and
 437         BFD_RELOC_MIPS_TLS_DTPREL64.
 438
 439 2007-07-02  Alan Modra  <amodra@bigpond.net.au>
 440
 441         * Makefile.am: Run "make dep-am".
 442         * Makefile.in: Regenerate.
 443         * aclocal.m4: Regenerate.
 444         * config.in: Regenerate.
 445         * doc/Makefile.in: Regenerate.
 446         * po/POTFILES.in: Regenerate.
 447         * po/gas.pot: Regenerate.
 448
 449 2007-07-02  Alan Modra  <amodra@bigpond.net.au>
 450
 451         * config/tc-ppc.c (ppc_pe_section): Comment out code assigning
 452         coff section flag values to bfd section flag.
 453
 454 2007-06-30  H.J. Lu  <hongjiu.lu@intel.com>
 455
 456         * aclocal.m4: Regenerated.
 457         * doc/Makefile.in: Likewise.
 458         * Makefile.in: Likewise.
 459
 460 2007-06-29  Joseph Myers  <joseph@codesourcery.com>
 461
 462         * as.c (main): Only call create_obj_attrs_section if IS_ELF.
 463
 464 2007-06-29  Joseph Myers  <joseph@codesourcery.com>
 465
 466         * as.c (create_obj_attrs_section): New.
 467         (main): Call create_obj_attrs_section for ELF.
 468         * read.c (s_gnu_attribute, skip_whitespace, skip_past_char,
 469         skip_past_comma, s_vendor_attribute): New.
 470         (potable): Add gnu_attribute for ELF.
 471         * read.h (s_vendor_attribute): Declare.
 472         * config/tc-arm.c (s_arm_eabi_attribute): Replace by wrapper
 473         round s_vendor_attribute.
 474         (aeabi_set_public_attributes): Update for new attributes
 475         interfaces.
 476         (arm_md_end): Remove attributes contents setting now done
 477         generically.
 478
 479 2007-06-29  M R Swami Reddy  <MR.Swami.Redd@nsc.com>
 480
 481         * Makefile.am: Add CR16 related entry.
 482         * Makefile.in: Regenerate.
 483         * config/tc-cr16.h: New file
 484         * config/tc-cr16.c: New file
 485         * doc/c-cr16.texi: New file for cr16
 486         * doc/all.texi: Entry for cr16
 487         * doc/Makefile.am: Added c-cr16.texi
 488         * doc/Makefile.in: Regenerate
 489         * doc/as.texinfo: Entry for CR16 target
 490         * NEWS: Announce the support for the new target.
 491
 492 2007-06-26  Paul Brook  <paul@codesourcery.com>
 493
 494         * config/tc-arm.c (parse_operands): Accept generic coprocessor regs
 495         for OP_RVC.
 496         (reg_names): Add fpinst, pfinst2, mvfr0 and mvfr1.
 497
 498 2007-06-25  H.J. Lu  <hongjiu.lu@intel.com>
 499
 500         * config/tc-i386.c (process_operands): Replace regKludge
 501         with RegKludge.
 502
 503 2007-06-25  Richard Sandiford  <richard@codesourcery.com>
 504
 505         * config/tc-mips.h (TC_SYMFIELD_TYPE): New.
 506         * config/tc-mips.c (append_insn): Record which symbols have
 507         R_MIPS16_26 relocations against them.
 508         (mips_fix_adjustable): Don't reduce relocations against such symbols.
 509
 510 2007-06-22  Sterling Augustine  <sterling@tensilica.com>
 511
 512         * config/tc-xtensa.c (xg_assembly_relax): Comment termination rules.
 513         (frag_format_size): Handle RELAX_IMMED_STEP3.
 514         (xtensa_relax_frag, md_convert_frag): Likewise.
 515         * config/tc-xtensa.h (xtensa_relax_statesE): Add RELAX_IMMED_STEP3.
 516         (RELAX_IMMED_MAXSTEPS): Adjust.
 517         * config/xtensa-relax.c (widen_spec_list): Add transitions from
 518         wide branches to branch-over-jumps.
 519         (build_transition): Handle wide branches in transition patterns.
 520
 521 2007-06-22  H.J. Lu  <hongjiu.lu@intel.com>
 522
 523         * config/tc-i386.c (disp_size): New.
 524         (imm_size): Likewise.
 525         (output_disp): Use disp_size and imm_size.
 526         (output_imm): Use imm_size.
 527
 528 2007-06-19  Sterling Augustine  <sterling@tensilica.com>
 529
 530         * config/tc-xtensa.h (struct xtensa_frag_type): Update comment about
 531         use of literal_frag field.
 532         * config/tc-xtensa.c (xtensa_mark_literal_pool_location): Record frag
 533         in the literal_frag field.
 534         (xtensa_move_literals): Use it here instead of searching.  Update
 535         literal_frag field with new value.
 536
 537 2007-06-14  Paul Brook  <paul@codesourcery.com>
 538
 539         * config/tc-arm.c (do_t_mov_cmp): Handle shift by register and
 540         narrow shift by immediate.
 541
 542 2007-06-14  H.J. Lu  <hongjiu.lu@intel.com>
 543
 544         * Makefile.am (ACLOCAL_AMFLAGS): Add -I ../config -I ../bfd.
 545
 546         * acinclude.m4: Don't include m4 files.
 547         (BFD_BINARY_FOPEN): Removed.
 548         Remove libtool kludge.
 549
 550         * Makefile.in: Regenerated.
 551         * doc/Makefile.in: Likewise.
 552         * aclocal.m4: Likewise.
 553         * configure: Likewise.
 554
 555 2007-06-11  Sterling Augustine  <sterling@tensilica.com>
 556             Bob Wilson  <bob.wilson@acm.org>
 557
 558         * config/tc-xtensa.c (XTENSA_PROP_INSN_NO_TRANSFORM): Renamed to...
 559         (XTENSA_PROP_NO_TRANSFORM): ...this.
 560         (frag_flags_struct): Move is_no_transform out of the insn sub-struct.
 561         (xtensa_mark_frags_for_org): New.
 562         (xtensa_handle_align): Set RELAX_ORG frag subtype for rs_org.
 563         (xtensa_post_relax_hook): Call xtensa_mark_frags_for_org.
 564         (get_frag_property_flags): Adjust reference to is_no_transform flag.
 565         (xtensa_frag_flags_combinable): Likewise.
 566         (frag_flags_to_number): Likewise.  Use XTENSA_PROP_NO_TRANSFORM.
 567         * config/tc-xtensa.h (xtensa_relax_statesE): Add RELAX_ORG.
 568
 569 2007-06-06  Paul Brook  <paul@codesourcery.com>
 570
 571         * config/tc-arm.c (s_align): Pad code sections appropriately.
 572
 573 2007-06-05  Paul Brook  <paul@codesourcery.com>
 574
 575         * config/tc-arm.c (insns): Correct Thumb-2 ldrd/strd opcodes.
 576
 577 2007-06-05  Nick Clifton  <nickc@redhat.com>
 578
 579         PR gas/4587
 580         * config/tc-sparc.c (sparc_ip): Terminate tls_ops array.
 581
 582 2007-06-05  Alan Modra  <amodra@bigpond.net.au>
 583
 584         * config/tc-spu.c (spu_cons): Use deferred_expression.  Handle
 585         number@ppu.
 586         (tc_gen_reloc): Abort if neither addsy or subsy is set.
 587         (md_apply_fix): Don't attempt to resolve SPU_PPU relocs.
 588         * config/tc-spu.h (md_operand): Handle @ppu without sym.
 589
 590 2007-05-31  Paul Brook  <paul@codesourcery.com>
 591
 592         * config/tc-arm.c (insns): Allow strex on M profile cores.
 593
 594 2007-05-29  David S. Miller  <davem@davemloft.net>
 595             Jakub Jelinek  <jakub@redhat.com>
 596
 597         PR gas/4558
 598         * config/tc-sparc.c (md_apply_fix): Fix relocation overflow checks
 599         for BFD_RELOC_SPARC_WDISP16 and BFD_RELOC_SPARC_WDISP19.
 600
 601 2007-05-29  Alan Modra  <amodra@bigpond.net.au>
 602
 603         * config/tc-spu.h: Wrap in #ifndef/#endif.  Delete coff macros.
 604
 605 2007-05-29  Alan Modra  <amodra@bigpond.net.au>
 606
 607         * config/tc-ppc.c: Convert to ISO C.
 608         * config/tc-ppc.c: Likewise.
 609
 610 2007-05-29  Alan Modra  <amodra@bigpond.net.au>
 611
 612         * write.h (EXEC_MACHINE_TYPE): Delete.
 613         (string_byte_count, section_alignment): Delete.
 614
 615 2007-05-28  Nathan Sidwell  <nathan@codesourcery.com>
 616
 617         * app.c (do_scrub_chars): Cope with \ at end of buffer.
 618
 619 2007-05-26  Alan Modra  <amodra@bigpond.net.au>
 620
 621         * config/tc-ppc.c (ppc_insert_operand): Truncate sign bits in
 622         top 32 bits of 64 bit value if so doing results in passing
 623         range check.  Rewrite sign extension fudges similarly.  Enable
 624         fudges for powerpc64 too.  Report user value if range check
 625         fails rather than fudged value.  Negate PPC_OPERAND_NEGATIVE
 626         range rather than value, also to report user value on failure.
 627
 628 2007-03-25  Paul Brook  <paul@codesourcery.com>
 629
 630         * config/tc-arm.c (T2_SUBS_PC_LR): Define.
 631         (do_t_add_sub): Correctly encode subs pc, lr, #const.
 632         (do_t_mov_cmp): Correctly encode movs pc, lr.
 633
 634 2007-05-24  Steve Ellcey  <sje@cup.hp.com>
 635
 636         * Makefile.in: Regnerate.
 637         * configure: Regenerate.
 638         * aclocal.m4: Regenerate.
 639         * doc/Makefile.in: Regenerate.
 640
 641 2007-05-22  Bob Wilson  <bob.wilson@acm.org>
 642
 643         * doc/c-xtensa.texi (Xtensa Automatic Alignment): Remove statements
 644         and index entries about automatic alignment of ENTRY instructions.
 645
 646 2007-05-22  Nick Clifton  <nickc@redhat.com>
 647
 648         * doc/as.texinfo: Use @copying around the copyright notice.
 649
 650 2007-05-18  Joseph Myers  <joseph@codesourcery.com>
 651
 652         * config/tc-mips.c (s_mipsset): Use generic s_set for directives
 653         containing a comma.
 654
 655 2007-05-17  H.J. Lu  <hongjiu.lu@intel.com>
 656
 657         PR gas/4517
 658         2003-06-05  Michal Ludvig  <mludvig@suse.cz>
 659         * doc/as.texinfo: Document new directives: .cfi_restore,
 660         .cfi_undefined, .cfi_same_value, .cfi_return_column,
 661         .cfi_remember_state and .cfi_restore_state.
 662
 663 2007-05-17  Nathan Sidwell  <nathan@codesourcery.com>
 664
 665         * config/tc-m68k.c (md_apply_fix): Show value of out of range
 666         fixups in error message.
 667         (md_conver_frag_1): Propagate the fix source location and use
 668         as_bad_where rather than fatal, for better error messages.
 669
 670 2007-05-16  Paul Brook  <paul@codesourcery.com>
 671
 672         * config/tc-arm.c (v7m_psrs): Add uppercase PSR names and xpsr.
 673
 674 2007-05-15  Mark Shinwell  <shinwell@codesourcery.com>
 675
 676         * app.c (do_scrub_chars): Don't damage \@ pseudo-variables.
 677
 678 2007-05-15  Vincent Riviere  <vincent.riviere@freesbee.fr>
 679
 680         PR gas/3041
 681         * config/tc-m68k.c (relaxable_symbol): Make sure that the correct
 682         addend is stored for relocs against weak symbols.
 683         (md_apply_fix): So not loose track of addend for relocs against
 684         weak symbols.
 685
 686 2007-05-14  Thiemo Seufer  <ths@mips.com>
 687
 688         * config/tc-mips.c (md_parse_option): Fix parsing of -O option.
 689
 690 2007-05-14  Mei Ligang  <ligang@sunnorth.com.cn>
 691
 692         * config/tc-score.c (data_op2, validate_immediate): Fix bug for
 693         addri, addri.c, subi, and subi.c when immediate number is hex.
 694         (score_insns): Remove subis and subis.c.
 695         (do_sub_rdi16): Delete.
 696
 697 2007-05-11  Alan Modra  <amodra@bigpond.net.au>
 698
 699         * config/tc-spu.c (md_pseudo_table): Add int, long, quad.  Call
 700         spu_cons for word.
 701         (md_assemble): Tidy use of insn.flag.
 702         (get_imm): Likewise.  Handle uppercase input too.
 703         (spu_cons): New function.
 704         * config/tc-spu.h (tc_fix_adjustable): Don't adjust SPU_PPU relocs.
 705         (TC_FORCE_RELOCATION): Don't resolve them either.
 706
 707 2007-05-05  Mark Shinwell  <shinwell@codesourcery.com>
 708
 709         * config/tc-arm.c (md_apply_fix): Generate more accurate
 710         diagnostic when 8-bit immediate range is exceeded for
 711         BFD_RELOC_ARM_OFFSET_IMM8.
 712
 713 2007-05-04  Alan Modra  <amodra@bigpond.net.au>
 714
 715         PR gas/4460
 716         * config/tc-i386.c (lex_got): Don't replace the reloc token with
 717         a space if we already have a space.
 718
 719 2007-05-03  H.J. Lu  <hongjiu.lu@intel.com>
 720
 721         * config/tc-i386.c (match_template): Don't explicitly check
 722         suffix for crc32 in Intel mode.
 723         (process_suffix): Issue an error for crc32 if the operand size
 724         is ambiguous.
 725
 726 2007-05-03  Vincent Riviere  <vincent.riviere@freesbee.fr>
 727             Nick Clifton  <nickc@redhat.com>
 728
 729         PR gas/3041
 730         * config/tc-m68k.c (relaxable_symbol): Do not relax weak symbols.
 731         (tc_gen_reloc): Adjust the addend of relocs against weak symbols.
 732         (md_apply_fix): Put zero values into the frags referencing weak
 733         symbols.
 734
 735 2007-05-02  Alan Modra  <amodra@bigpond.net.au>
 736
 737         PR 4448
 738         * config/tc-ppc.c (ppc_insert_operand): Don't increase min for
 739         PPC_OPERAND_PLUS1.
 740
 741 2007-05-01  H.J. Lu  <hongjiu.lu@intel.com>
 742
 743         * config/tc-i386.c (match_template): Check suffix for crc32 in
 744         Intel mdoe.
 745         (process_suffix): Default the suffix of 8bit crc32 to
 746         BYTE_MNEM_SUFFIX.
 747         (check_byte_reg): Skip check for 8bit crc32.
 748
 749 2007-04-30  H.J. Lu  <hongjiu.lu@intel.com>
 750
 751         * config/tc-i386.c (md_assemble): Use register_prefix in
 752         error/warning message.
 753         (check_byte_reg): Likewise.
 754         (check_long_reg): Likewise.
 755         (check_qword_reg): Likewise.
 756         (check_word_reg): Likewise.
 757         (process_operands): Likewise.
 758
 759 2007-04-30  Alan Modra  <amodra@bigpond.net.au>
 760
 761         PR 4436
 762         * config/tc-ppc.c (ppc_insert_operand): Disable range check if
 763         min > max.
 764
 765 2007-04-28  Thiemo Seufer  <ths@networkno.de>
 766
 767         * config/tc-mips.c: Fix comment.
 768
 769 2007-04-26  Anatoly Sokolov <aesok@post.ru>
 770
 771         * config/tc-avr.c (mcu_types): Add support for atmega8hva and
 772         atmega16hva devices. Move at90usb82 device to 'avr5' architecture.
 773         * doc/c-avr.texi: Document new devices.
 774
 775 2007-04-24  Alan Modra  <amodra@bigpond.net.au>
 776
 777         * Makefile.am: Run "make dep-am".
 778         * Makefile.in: Regenerate.
 779
 780 2007-04-23  Nathan Sidwell  <nathan@codesourcery.com>
 781
 782         * config/tc-m68k.c (mcf54455_ctrl): New.
 783         (HAVE_LONG_DISP, HAVE_LONG_CALL, HAVE_LONG_COND): New.
 784         (m68k_archs): Add isac.
 785         (m68k_cpus): Add 54455 family.
 786         (m68k_ip): Split Bg into Bb, Bs, Bg.
 787         (m68k_elf_final_processing): Add ISA_C.
 788         * doc/c-m68k.texi (M680x0 Options): Add isac.
 789
 790 2007-04-22  Alan Modra  <amodra@bigpond.net.au>
 791
 792         * read.c (read_a_source_file): Skip multiple spaces to
 793         cover hack in mmix md_start_line_hook which overwrites a
 794         colon with a space.  Delete sermon and needless assertion.
 795
 796 2007-04-21  Alan Modra  <amodra@bigpond.net.au>
 797
 798         * config/atof-vax.c (atof_vax_sizeof): Change return type to unsigned.
 799         (md_atof): Make number_of_chars unsigned.  Revert last change.
 800         * config/tc-or32.c (md_apply_fix): Delete bogus assertions.
 801         * config/tc-sh.c (sh_optimize_expr): Only define for OBJ_ELF.
 802         * config/tc-sh.h (md_optimize_expr): Likewise.
 803         * config/tc-sh64.c (shmedia_md_pcrel_from_section): Delete bogus
 804         assertion.
 805         * config/tc-xtensa.c (convert_frag_immed_finish_loop): Likewise.
 806
 807 2007-04-21  Nick Clifton  <nickc@redhat.com>
 808
 809         * config/atof-vax.c (md_atof): Fix comparison inside know().
 810
 811         * config/tc-ia64.c (emit_one_bundle): Fix typo.
 812
 813 2007-04-21  Alan Modra  <amodra@bigpond.net.au>
 814
 815         * expr.c (expr): Assert on rankarg, not rank which can be unsigned.
 816         * read.c (read_a_source_file): Remove buffer_limit[-1] assertion.
 817         Don't skip over NUL char.
 818         (pseudo_set): Set X_op for registers to O_register.
 819         * symbols.c (symbol_clone): Remove assertion that sym is defined.
 820         (resolve_symbol_value): Resolve O_register symbols.
 821         * config/tc-i386.c (parse_real_register): Don't use i386_float_regtab.
 822         Instead find st(0) by hash lookup.
 823         * config/tc-ppc.c (ppc_macro): Warning fix.
 824
 825         * as.h (ENABLE_CHECKING): Default define to 0.
 826         (know): Assert if ENABLE_CHECKING.
 827         (struct relax_type): Remove superfluous declaration.
 828         * configure.in (--enable-checking): New.
 829         * configure: Regenerate.
 830         * config.in: Regenerate.
 831         * config/tc-ppc.c (ppc_setup_opcodes): Do checks when ENABLE_CHECKING.
 832         Check for duplicate powerpc_operands entries.
 833
 834 2007-04-20  Nathan Sidwell  <nathan@codesourcery.com>
 835
 836         * config/tc-m68k.c (mcf5253_ctrl): New.
 837         (mcf52223_ctrl): New.
 838         (m68k_cpus): Add 5253, 52221, 52223.
 839
 840         * config/m68k-parse.h (RAMBAR_ALT): New.
 841         * config/tc-m68k.c (mcf5206_ctrl, mcf5307_ctrl): New.
 842         (mcf_ctrl, mcf5208_ctrl, mcf5210a_ctrl, mcf5213_ctrl, mcf52235_ctrl,
 843         mcf5225_ctrl, mcf5235_ctrl, mcf5271_ctrl, mcf5275_ctrl,
 844         mcf5282_ctrl, mcf5329_ctrl, mcf5373_ctrl, mcfv4e_ctrl,
 845         mcf5475_ctrl, mcf5485_ctrl): Add RAMBAR synonym for
 846         RAMBAR1.
 847         (mcf5272_ctrl): Add RAMBAR0, replace add RAMBAR with RAMBAR_ALT.
 848         (m68k_cpus): Adjust 5206, 5206e & 5307 entries.
 849         (m68k_ip) <Case J>: Detect when RAMBAR_ALT should be used.  Add it
 850         to control register mapping.
 851
 852 2007-04-20  Alan Modra  <amodra@bigpond.net.au>
 853
 854         * messages.c (as_internal_value_out_of_range): Fix typo in
 855         error message.  Return after printing domain error.
 856         * config/tc-ppc.c (ppc_insert_operand): Preserve low zero bits
 857         in max when shifting right.
 858
 859 2007-04-20  Alan Modra  <amodra@bigpond.net.au>
 860
 861         * messages.c (as_internal_value_out_of_range): Extend to report
 862         errors for values with invalid low bits set.
 863         * config/tc-ppc.c (ppc_setup_opcodes): Check powerpc_operands bitm
 864         fields.  Check that operands and opcode fields are disjoint.
 865         (ppc_insert_operand): Check operands using mask rather than bit
 866         count.   Check low bits too.  Handle PPC_OPERAND_PLUS1.  Adjust
 867         insertion code.
 868         (md_apply_fix): Adjust for struct powerpc_operand change.
 869
 870 2007-04-19  Paul Brook  <paul@codesourcery.com>
 871
 872         * config/tc-arm.c (md_assemble): Only allow 16-bit instructions on
 873         Thumb-1.  Add sanity check for bogus relaxations.
 874
 875 2007-04-19  Paul Brook  <paul@codesourcery.com>
 876
 877         * config/tc-arm.c (insns): Allow rsb and rsbs on Thumb-1.
 878
 879 2007-04-19  Alan Modra  <amodra@bigpond.net.au>
 880
 881         * Makefile.am: Run "make dep-am".
 882         * Makefile.in: Regenerate.
 883
 884 2007-04-19  Nathan Froyd <froydnj@codesourcery.com>
 885
 886         * doc/c-ppc.texi (PowerPC-Opts): Document -me500, -me500x2, -mspe.
 887
 888 2007-04-18  H.J. Lu <hongjiu.lu@intel.com>
 889
 890         * doc/c-i386.texi; Document .ssse3, .sse4.1, .sse4.2 and .sse4.
 891
 892 2007-04-18  H.J. Lu <hongjiu.lu@intel.com>
 893
 894         * config/tc-i386.c (cpu_arch): Add .sse4.2 and .sse4.
 895         (match_template): Handle operand size for crc32 in SSE4.2.
 896         (process_suffix): Handle operand type for crc32 in SSE4.2.
 897         (output_insn): Support SSE4.2.
 898
 899 2007-04-18  H.J. Lu <hongjiu.lu@intel.com>
 900
 901         * config/tc-i386.c (cpu_arch): Add .sse4.1.
 902         (process_operands): Adjust implicit operand for blendvpd,
 903         blendvps and pblendvb in SSE4.1.
 904         (output_insn): Support SSE4.1.
 905
 906 2007-04-18  Paul Brook  <paul@codesourcery.com>
 907
 908         * config/tc-arm.c (do_t_rsb): Use 16-bit encoding when possible.
 909
 910 2007-04-16  Kaz Kojima  <kkojima@rr.iij4u.or.jp>
 911
 912         * config/tc-sh.c (sh_handle_align):  Call as_bad_where instead
 913         of as_warn_where for misaligned data.
 914
 915 2007-04-15  Kaz Kojima  <kkojima@rr.iij4u.or.jp>
 916
 917         * config/tc-sh.c (align_test_frag_offset_fixed_p): Handle
 918         rs_fill frags.
 919
 920 2007-04-14  Steve Ellcey  <sje@cup.hp.com>
 921
 922         * Makefile.am: Add ACLOCAL_AMFLAGS.
 923         * Makefile.in: Regenerate.
 924
 925 2007-04-14  Kaz Kojima  <kkojima@rr.iij4u.or.jp>
 926
 927         * config/tc-sh.c (align_test_frag_offset_fixed_p): New.
 928         (sh_optimize_expr): Likewise.
 929         * config/tc-sh.h (md_optimize_expr): Define.
 930         (sh_optimize_expr): Prototype.
 931
 932 2007-04-06  Matt Thomas  <matt@netbsd.org>
 933
 934         * config/tc-vax.c (vax_cons): Added to support %pcrel{8,16,32}(exp)
 935         to emit pcrel relocations by DWARF2 in non-code sections.  Borrowed
 936         heavily from tc-sparc.c.  (vax_cons_fix_new): Likewise.
 937
 938 2007-04-04  Kazu Hirata  <kazu@codesourcery.com>
 939
 940         * config/tc-m68k.c (HAVE_LONG_BRANCH): Add fido_a.
 941
 942 2007-04-04  Paul Brook  <paul@codesourcery.com>
 943
 944         * config/tc-arm.c (do_neon_ext): Enforce immediate range.
 945         (insns): Use I15 for vext.
 946
 947 2007-04-04  Paul Brook  <paul@codesourcery.com>
 948
 949         * configure.tgt: Loosen checks for arm uclinux eabi targets.
 950
 951 2007-04-02  Sterling Augustine  <sterling@tensilica.com>
 952
 953         * config/tc-xtensa.c (xtensa_flush_pending_output): Check
 954         outputting_stabs_line_debug.
 955
 956 2007-03-26  Anatoly Sokolov <aesok@post.ru>
 957
 958         * config/tc-avr.c (mcu_types): Add support for at90pwm1, at90usb82,
 959         at90usb162, atmega325p, atmega329p, atmega3250p and atmega3290p
 960         devices.
 961         * doc/c-avr.texi: Document new devices.
 962
 963 2007-04-02  Richard Sandiford  <richard@codesourcery.com>
 964
 965         * doc/as.texinfo: Add -mvxworks-pic to the list of MIPS options.
 966         * doc/c-mips.texi (-KPIC, -mvxworks-pic): Document.
 967         * config/tc-mips.c (md_show_usage): Mention -mvxworks-pic.
 968
 969 2007-03-30  Sterling Augustine  <sterling@tensilica.com>
 970             Bob Wilson  <bob.wilson@acm.org>
 971
 972         * config/tc-xtensa.c (xtensa_move_labels): Remove loops_ok argument.
 973         Do not check is_loop_target flag.
 974         (xtensa_frob_label): Adjust calls to xtensa_move_labels.
 975         (xg_assemble_vliw_tokens): Likewise.  Also avoid calling
 976         xtensa_move_labels for alignment of loop opcodes.
 977
 978 2007-03-30  H.J. Lu  <hongjiu.lu@intel.com>
 979
 980         * config/tc-i386.c (process_suffix): Reindent a bit.
 981
 982 2007-03-30  Paul Brook  <paul@codesourcery.com>
 983
 984         * config/tc-arm.c (encode_thumb2_ldmstm): New function.
 985         (do_t_ldmstm): Generate 16-bit push/pop.  Use encode_thumb2_ldmstm.
 986         (do_t_push_pop):  Use encode_thumb2_ldmstm.
 987
 988 2007-03-29  DJ Delorie  <dj@redhat.com>
 989
 990         * config/tc-m32c.c (rl_for, relaxable): Protect argument.
 991         (md_relax_table): Add entries for ADJNZ macros.
 992         (M32C_Macros): Add ADJNZ macros.
 993         (subtype_mappings): Add entries for ADJNZ macros.
 994         (insn_to_subtype): Check for adjnz and sbjnz insns.
 995         (md_estimate_size_before_relax): Pass insn to insn_to_subtype.
 996         (md_convert_frag): Convert adjnz and sbjnz.
 997
 998 2007-03-29  Nick Clifton  <nickc@redhat.com>
 999
1000         * itbl-ops.c (itbl_entry): Remove unnecessary and excessively long
1001         initialization.
1002         * itbl-ops.h (enum e_processor): Initialise the e_nprocs field
1003         using ITBL_NUMBER_OF_PROCESSORS.
1004         * itbl-parse.y (yyerror): Remove use of redundant macro PARAMS.
1005
1006 2007-03-28  H.J. Lu  <hongjiu.lu@intel.com>
1007
1008         * config/tc-i386.c (build_modrm_byte): For instructions with 2
1009         register operands, encode destination in i.rm.regmem if its
1010         RegMem bit is set.
1011
1012 2007-03-28  Richard Sandiford  <richard@codesourcery.com>
1013             Phil Edwards  <phil@codesourcery.com>
1014
1015         * doc/as.texinfo: Put the contents after the title page rather
1016         than at the end of the document.
1017
1018 2007-03-27  Alan Modra  <amodra@bigpond.net.au>
1019
1020         * NEWS: Mention ".reloc".
1021
1022 2007-03-26  Sterling Augustine  <sterling@tensilica.com>
1023
1024         * config/tc-xtensa.c (xg_translate_idioms): Allow assembly idioms
1025         in FLIX instructions.
1026
1027 2007-03-26  Julian Brown  <julian@codesourcery.com>
1028
1029         * config/tc-arm.c (arm_it): Add immisfloat field.
1030         (parse_qfloat_immediate): Disallow integer syntax for floating-point
1031         immediates. Fix hex immediates, handle 0.0 and -0.0 specially.
1032         (parse_neon_mov): Set immisfloat bit for operand if it parsed as a
1033         float.
1034         (neon_cmode_for_move_imm): Reject non-float immediates for float
1035         operands.
1036         (neon_move_immediate): Pass immisfloat bit to neon_cmode_for_move_imm.
1037
1038 2007-03-26  Julian Brown  <julian@codesourcery.com>
1039
1040         * doc/c-arm.texi: Add documentation for .dn/.qn directives.
1041
1042 2007-03-26  Alan Modra  <amodra@bigpond.net.au>
1043
1044         * doc/as.texinfo (Reloc): Document.
1045         * read.c (potable): Add "reloc".
1046         (s_reloc): New function.
1047         * write.c (reloc_list): New global var.
1048         (resolve_reloc_expr_symbols): New function.
1049         (write_object_file): Call it.
1050         (write_relocs): Process reloc_list.
1051         * write.h (struct reloc_list): New.
1052         (reloc_list): Declare.
1053
1054 2007-03-24  Paul Brook  <paul@codesourcery.com>
1055
1056         * config/tc-arm.c (do_t_ldmstm): Error on Thumb-2 addressing modes.
1057
1058 2007-03-24  Paul Brook  <paul@codesourcery.com>
1059         Mark Shinwell  <shinwell@codesourcery.com>
1060
1061         * config/tc-arm.c (operand_parse_code): Add OP_oRRw.
1062         (parse_operands): Don't expect comma if first operand missing.
1063         Handle OP_oRRw.
1064         (do_srs): Encode register number, checking it is r13.  Update comment.
1065         (insns): Update SRS entries to take a register.
1066
1067 2007-03-23  H.J. Lu  <hongjiu.lu@intel.com>
1068
1069         * config/tc-i386.c (md_begin): Allow '.' in mnemonic.
1070
1071 2007-03-23  Mark Shinwell  <shinwell@codesourcery.com>
1072
1073         * config/tc-arm.c (md_apply_fix): Turn CBZ instructions that
1074         attempt to jump to the next instruction into NOPs.
1075
1076 2007-03-23  Alan Modra  <amodra@bigpond.net.au>
1077
1078         * config/tc-spu.c: Don't include opcode/spu.h.
1079         (md_assemble): Set tc_fix_data.insn_tag and arg_format.
1080         (md_apply_fix): Adjust.
1081         * config/tc-spu.h: Include opcode/spu.h.
1082         (struct tc_fix_info): New.
1083         (TC_FIX_TYPE, TC_INIT_FIX_DATA): Adjust.
1084         (TC_FORCE_RELOCATION): Define.
1085
1086 2007-03-22  Joseph Myers  <joseph@codesourcery.com>
1087
1088         * doc/as.texinfo: Include VERSION_PACKAGE when reporting version.
1089
1090 2007-03-21  H.J. Lu  <hongjiu.lu@intel.com>
1091
1092         * config/tc-i386.c (process_suffix): Check 0x90 instead of
1093         xchg for xchg %rax,%rax.
1094
1095 2007-03-21  H.J. Lu  <hongjiu.lu@intel.com>
1096
1097         * config/tc-i386.c: Replace REX_MODE64, REX_EXTX, REX_EXTY
1098         and REX_EXTZ with REX_W, REX_R, REX_X and REX_B respectively.
1099
1100 2007-03-21  H.J. Lu  <hongjiu.lu@intel.com>
1101
1102         PR binutils/4218
1103         * config/tc-i386.c (match_template): Properly handle 64bit mode
1104         "xchg %eax, %eax".
1105
1106 2007-03-21  Anton Ertl  <anton@mips.complang.tuw>
1107
1108         PR gas/4124
1109         * config/tc-alpha.c (emit_ustX): Fix ustq code generation.
1110
1111 2007-03-21  H.J. Lu  <hongjiu.lu@intel.com>
1112
1113         * Makefile.am: Run dep-am.
1114         * Makefile.in: Regenerated.
1115
1116         * config/tc-i386.c: Don't include "opcodes/i386-opc.h".
1117
1118         * config/tc-i386.h: Include "opcodes/i386-opc.h".
1119         (NOP_OPCODE): Removed.
1120         (template): Likewise.
1121
1122 2007-03-21  Andreas Schwab  <schwab@suse.de>
1123
1124         * config/tc-i386.h (NOP_OPCODE): Restore.
1125
1126 2007-03-18  Mark Shinwell  <shinwell@codesourcery.com>
1127
1128         * config/tc-arm.c (do_mul): Don't warn about overlapping
1129         Rd and Rm operands when assembling for v6 or above.
1130         Correctly capitalize register names in the messages.
1131         (do_mlas): Likewise.  Delete spurious blank line.
1132
1133 2007-03-16  Kazu Hirata  <kazu@codesourcery.com>
1134
1135         * config/tc-m68k.c (m68k_cpus): Add an entry for fidoa.
1136
1137 2007-03-15  H.J. Lu  <hongjiu.lu@intel.com>
1138
1139         * config/tc-i386.c (md_begin): Use i386_regtab_size to scan
1140         i386_regtab.
1141         (parse_register): Use i386_regtab_size instead of ARRAY_SIZE
1142         on i386_regtab.
1143
1144 2007-03-15  Alexandre Oliva  <aoliva@redhat.com>
1145
1146         PR gas/4184
1147         * app.c (do_scrub_chars): PUT after setting states.
1148
1149 2007-03-15  H.J. Lu  <hongjiu.lu@intel.com>
1150
1151         * Makefile.am: Run "make dep-am".
1152         * Makefile.in: Regenerated.
1153
1154         * config/tc-i386.c: Include "opcodes/i386-opc.h" instead of
1155         "opcode/i386.h".
1156         (md_begin): Check reg_name != NULL for the last entry in
1157         i386_regtab.
1158
1159         * config/tc-i386.h: Move many entries to opcode/i386.h and
1160         opcodes/i386-opc.h.
1161
1162         * configure.in (need_opcodes): Set true for i386.
1163         * configure: Regenerated.
1164
1165 2007-03-15  H.J. Lu  <hongjiu.lu@intel.com>
1166
1167         * Makefile.am (REPORT_BUGS_TO): Removed.
1168         (INCLUDES): Remove -DREPORT_BUGS_TO.
1169         * Makefile.in: Regenerated.
1170
1171         * configure.in (--with-bugurl): Removed.
1172         * configure: Regenerated.
1173
1174         * doc/Makefile.am (as_TEXINFOS): Remove gasver.texi.
1175         (AM_MAKEINFOFLAGS): Add -I ../../bfd/doc.
1176         (TEXI2DVI): Likewise.
1177         (gasver.texi): Removed.
1178         (MOSTLYCLEANFILES): Remove gasver.texi.
1179         (as.1): Don't depend on gasver.texi.
1180         * doc/Makefile.in: Regenerated.
1181
1182         * doc/as.texi: Include bfdver.texi instead of gasver.texi.
1183
1184 2007-03-14  Daniel Jacobowitz  <dan@codesourcery.com>
1185
1186         * config/tc-arm.c (arm_copy_symbol_attributes): New.
1187         * config/tc-arm.h (arm_copy_symbol_attributes): Declare.
1188         (TC_COPY_SYMBOL_ATTRIBUTES): Define.
1189         * gas/symbols.c (copy_symbol_attributes): Use
1190         TC_COPY_SYMBOL_ATTRIBUTES.
1191
1192 2007-03-14  Paul Brook  <paul@codesourcery.com>
1193
1194         * config/tc-arm.c (T16_32_TAB): Fix dec_sp encoding.
1195
1196 2007-03-14  Alan Modra  <amodra@bigpond.net.au>
1197
1198         PR 4029
1199         * write.c (relax_segment): Insert extra alignment padding
1200         to break infinite relax loop when given impossible
1201         gcc_except_table assembly.
1202
1203 2007-03-12  H.J. Lu  <hongjiu.lu@intel.com>
1204
1205         * config/tc-i386.c (md_assemble): Use Opcode_XXX instead of XXX
1206         on i.tm.base_opcode.
1207         (match_template): Likewise.
1208         (process_operands): Use ~0x3 mask to match MOV_AX_DISP32.
1209
1210         * config/tc-i386.h (Opcode_D): New.
1211         (Opcode_FloatR): Likewise.
1212         (Opcode_FloatD): Likewise.
1213         (D): Redefined.
1214         (W): Likewise.
1215         (FloatMF): Likewise.
1216         (FloatR): Likewise.
1217         (FloatD): Likewise.
1218
1219 2007-03-09  Alexandre Oliva  <aoliva@redhat.com>
1220
1221         * app.c (do_scrub_chars): Recognize comments after # line "file".
1222         * read.c (get_linefile_number): New.
1223         (s_app_line): Accept ill-formed .linefile lines as comments.
1224
1225 2007-03-09  Alan Modra  <amodra@bigpond.net.au>
1226
1227         * config/tc-i386.h (WORKING_DOT_WORD): Define.
1228
1229 2007-03-09  Alexandre Oliva  <aoliva@redhat.com>
1230
1231         * app.c (do_scrub_chars): Turn #<line>"file"flags into .linefile.
1232         * as.h (new_logical_line_flags): New.
1233         * input-scrub.c (new_logical_line): Turned into wrapper for...
1234         (new_logical_line_flags): this.  Handle flags.
1235         * read.c (potable): Add linefile.  Adjust appline argument.
1236         (s_app_file): Fake .appfiles no more.
1237         (s_app_line): For .linefile, accept file name and flags.
1238
1239 2007-03-08  Alan Modra  <amodra@bigpond.net.au>
1240
1241         * symbols.c (symbol_relc_make_sym): Comment typo fixes.
1242
1243 2007-03-08  Alan Modra  <amodra@bigpond.net.au>
1244
1245         * Makefile.am: Run "make dep-am".
1246         * Makefile.in: Regenerate.
1247         * po/POTFILES.in: Regenerate.
1248
1249 2007-03-07  Joseph Myers  <joseph@codesourcery.com>
1250
1251         * configure.in (REPORT_BUGS_TEXI): Define to Texinfo version of
1252         bug-reporting URL.
1253         * doc/Makefile.am (gasver.texi): Define BUGURL.
1254         * doc/as.texinfo: Use BUGURL.
1255         * Makefile.in, configure, doc/Makefile.in: Regenerate.
1256
1257 2007-03-06  Andreas Krebbel  <krebbel1@de.ibm.com>
1258
1259         * config/tc-s390.c (md_parse_option): z9-ec option added.
1260
1261 2007-03-02  Paul Brook  <paul@codesourcery.com>
1262
1263         * config/tc-arm.c (relax_immediate): Always return positive values.
1264         (relaxed_symbol_addr): New function.
1265         (relax_adr, relax_branch): Use it.
1266         (arm_relax_frag): Pass strect argument.  Adjust infinite loop check.
1267
1268 2007-03-01  Joseph Myers  <joseph@codesourcery.com>
1269
1270         * as.c (parse_args): Update copyright date.
1271
1272 2007-02-28  Nathan Sidwell  <nathan@codesourcery.com>
1273
1274         * configure.tgt (sh-*-uclinux, sh[12]-*-uclinux): Specify as elf.
1275
1276 2007-02-28  Nick Clifton  <nickc@redhat.com>
1277
1278         PR gas/3797
1279         * config/tc-d10v.c (do_assemble): Do not generate error messages,
1280         just return -1 whenever a problem is encountered.
1281         (md_assemble): If do_assemble returns -1 generate a non-fatal
1282         error message and return.
1283
1284         PR gas/2623
1285         * config/tc-msp430.c (line_separator_char): Change to '{'.
1286
1287 2007-02-27  Alan Modra  <amodra@bigpond.net.au>
1288
1289         * config/tc-m68hc11.c (fixup24): Correct fixup size.
1290         (build_jump_insn): Likewise.
1291         (build_insn): Likewise.
1292         (s_m68hc11_relax): Likewise.
1293
1294 2007-02-27  Alan Modra  <amodra@bigpond.net.au>
1295
1296         * config/obj-elf.c (elf_frob_file): frag_wane any new frags.
1297
1298 2007-02-25  Mark Shinwell  <shinwell@codesourcery.com>
1299
1300         * config/tc-arm.c (do_vfp_nsyn_pop): Use fldmias/fldmiad.
1301
1302 2007-02-23  Alan Modra  <amodra@bigpond.net.au>
1303
1304         * config/tc-mn10300.c (md_convert_frag): Correct fixup size.
1305         (md_assemble): Likewise.
1306
1307 2007-02-22  Alan Modra  <amodra@bigpond.net.au>
1308
1309         * write.c (size_seg): Always clear SEC_RELOC here.
1310         (install_reloc): New function, extracted from..
1311         (write_relocs): ..here.  Combine RELOC_EXPANSION_POSSIBLE code
1312         with !RELOC_EXPANSION_POSSIBLE code.  Don't add fr_offset when
1313         testing frag size.  Set SEC_RELOC here.
1314
1315 2007-02-21  Alan Modra  <amodra@bigpond.net.au>
1316
1317         PR 4082
1318         * config/tc-avr.h (TC_FX_SIZE_SLACK): Define.
1319
1320 2007-02-20  Thiemo Seufer  <ths@mips.com>
1321
1322         * doc/c-mips.texi: Document 74kc, 74kf, 74kx.
1323
1324 2007-02-20  Thiemo Seufer  <ths@mips.com>
1325
1326         * config/tc-mips.c (mips_cpu_info_table): Add 74K configurations.
1327
1328 2007-02-20  Thiemo Seufer  <ths@mips.com>
1329             Chao-Ying Fu  <fu@mips.com>
1330
1331         * config/tc-mips.c (mips_set_options, mips_opts, file_ase_dspr2,
1332         ISA_SUPPORTS_DSPR2_ASE, MIPS_CPU_ASE_DSPR2): Add DSP R2 ASE support.
1333         (macro_build): Add case '2'.
1334         (macro): Expand M_BALIGN to nop, packrl.ph or balign.
1335         (validate_mips_insn): Add support for balign instruction.
1336         (mips_ip): Handle DSP R2 instructions. Support balign instruction.
1337         (OPTION_DSPR2, OPTION_NO_DSPR2, OPTION_COMPAT_ARCH_BASE,
1338         md_parse_option, mips_after_parse_args): Add -mdspr2 and -mno-dspr2
1339         command line options.
1340         (s_mipsset): Add support for .set dspr2 and .set nodspr2 directives.
1341         (md_show_usage): Add -mdspr2 and -mno-dspr2 help output.
1342         * doc/c-mips.texi, doc/as.texinfo: Document -mdspr2, -mno-dspr2,
1343         .set dspr2, .set nodspr2.
1344
1345 2007-02-20  Nathan Sidwell  <nathan@codesourcery.com>
1346
1347         * config/tc-m68k.c (mcf5210a_ctrl, mcf52235_ctrl, mcf5225_ctrl): New.
1348         (m68k_cpus): Add 5210a..5211a, 52230..52235 5224..5225.
1349
1350 2007-02-18  Alan Modra  <amodra@bigpond.net.au>
1351
1352         * write.c (TC_FX_SIZE_SLACK): Define.
1353         (write_relocs): Reinstate check for fixup within frag.
1354         * config/tc-bfin.h (TC_FX_SIZE_SLACK): Define.
1355         * config/tc-h8300.h (TC_FX_SIZE_SLACK): Define.
1356         * config/tc-mmix.h (TC_FX_SIZE_SLACK): Define.
1357         * config/tc-sh.h (TC_FX_SIZE_SLACK): Define.
1358         * config/tc-xstormy16.h (TC_FX_SIZE_SLACK): Define.
1359
1360 2007-02-17  Mark Mitchell  <mark@codesourcery.com>
1361             Nathan Sidwell  <nathan@codesourcery.com>
1362             Vladimir Prus  <vladimir@codesourcery.com
1363             Joseph Myers  <joseph@codesourcery.com>
1364
1365         * configure.in (--with-bugurl): New option.
1366         * configure: Regenerate.
1367         * dep-in.sed: Remove bin-bugs.h.
1368         * Makefile.am (REPORT_BUGS_TO): Define.
1369         (INCLUDES): Define REPORT_BUGS_TO.
1370         (DEP_INCLUDES): Likewise.
1371         ($(OBJS)): No longer depend on bin-bugs.h.
1372         * Makefile.in: Regenerate.
1373         * doc/Makefile.in: Regenerate.
1374         * as.c (show_usage): Don't print empty REPORT_BUGS_TO.
1375         * as.h: Remove include of bin-bugs.h.
1376
1377 2007-02-17  Alan Modra  <amodra@bigpond.net.au>
1378
1379         * write.c: White space fixes.
1380         (fixup_segment): Move symbol_mri_common_p adjustments..
1381         (write_relocs): ..and symbol_equated_reloc_p adjustments..
1382         (adjust_reloc_syms): ..to here.
1383
1384 2007-02-16  Alan Modra  <amodra@bigpond.net.au>
1385
1386         * subsegs.c (subseg_change, subseg_get): Use xcalloc rather than
1387         xmalloc, memset.  Don't bother assigning NULL to known zero mem.
1388         (subseg_set_rest): Remove unnecessary cast.
1389         * write.c: Include libbfd.h.  Replace PTR with void * throughout.
1390         Remove unnecessary forward declarations and casts.
1391         (set_symtab): Delete extern bfd_alloc.
1392         (fixup_segment): Move.
1393
1394 2007-02-15  Nathan Sidwell  <nathan@codesourcery.com>
1395
1396         * config/m68k-parse.h (m68k_register): Add ROMBAR0, ASID.
1397         * config/tc-m68k.c (mcfv4e_ctrl): Add ColdFire specific names.
1398         (mcf5475_ctrl, mcf5485_ctrl): New.
1399         (m68k_cpus): Use mcf5485_ctrl and mcf5485_ctrl for those families.
1400         (m68k_ip): Add ASID, MMUBAR, ROMBAR0 handling.
1401         (init_table): Add asid, mmubar, adjust rombar0.
1402
1403 2007-02-14  Alan Modra  <amodra@bigpond.net.au>
1404
1405         * config/tc-i386.h (Seg2ShortForm, Seg3ShortForm): Delete.
1406         * config/tc-i386.c: Wrap overly long lines, whitespace fixes.
1407         (process_operands): Move old Seg2ShortForm and Seg3ShortForm
1408         code, and test for these insns using a combination of
1409         opcode_modifier and operand_types.
1410
1411 2007-02-07  Paul Brook  <paul@codesourcery.com>
1412
1413         * configure.tgt: Add arm*-*-uclinux-*eabi.
1414
1415 2007-02-05  Dave Brolley  <brolley@redhat.com>
1416             Richard Sandiford  <rsandifo@redhat.com>
1417             DJ Delorie  <dj@redhat.com>
1418             Stan Cox  <scox@redhat.com>
1419             Jim Blandy  <jimb@redhat.com>
1420             Nick Clifton  <nickc@redhat.com>
1421             Jim Wilson  <wilson@redhat.com>
1422             Frank Ch. Eigler  <fche@redhat.com>
1423             Graydon Hoare  <graydon@redhat.com>
1424             Ben Elliston  <bje@redhat.com>
1425             John Healy  <jhealy@redhat.com>
1426             Richard Henderson  <rth@redhat.com>
1427
1428         * Makefile.am (CPU_TYPES): Add mep.
1429         (TARGET_CPU_CFILES): Add tc-mep.c.
1430         (TARGET_CPU_HFILES): Add tc-mep.h.
1431         (DEPTC_mep_elf): New variable.
1432         (DEPTC_mep_coff): Likewise.
1433         (DEPOBJ_mep_coff, DEPOBJ_mep_elf, DEP_mep_coff, DEP_mep_elf): Likewise.
1434         * configure.in: Support mep.
1435         * configure.tgt: Likewise.
1436         * config/tc-mep.c: New file.
1437         * config/obj-elf.c: New file.
1438         * config/tc-mep.c: New file.
1439         * config/tc-mep.h: New file.
1440         * testsuite/gas/mep: New testsuite with content.
1441         * Makefile.in: Regenerate.
1442         * configure: Regenerate.
1443
1444 2007-02-05  Dave Brolley  <brolley@redhat.com>
1445
1446         * cgen.c (gas_cgen_install_complex_reloc): Removed.
1447         (complex_reloc_installation_howto): Removed.
1448
1449 2007-02-05  Dave Brolley  <brolley@redhat.com>
1450             Graydon Hoare  <graydon@redhat.com>
1451             DJ Delorie  <dj@redhat.com>
1452             Catherine Moore  <clm@redhat.com>
1453             Michael Chastain  <chastain@redhat.com>
1454             Frank Ch. Eigler  <fche@redhat.com>
1455
1456         * symbols.c (use_complex_relocs_for): New, to decide
1457         when to use complex relocs. Add signed RELC support.
1458         (resolve_symbol_value): Call use_complex_relocs_for. Unconditionally
1459         encode expression symbols as mangled complex relocation symbols (when
1460         compiled with -DOBJ_COMPLEX_RELOC).
1461         (symbol_relc_make_sym,value,expr): New traversal/conversion routines.
1462         * cgen.c (gas_cgen_md_apply_fix3):  Only set signed_p if RELC. Call
1463         encode_addend with new args. Modify to get start, length from
1464         ifield whenever it is set. Also change condition on which
1465         self-describing relocs are encoded. Add hook into
1466         gas_cgen_encode_addend.
1467         (queue_fixup_recursively): Add signed RELC support. Change from masked
1468         expr to trunc flag. Restore assignment of sub-field value to
1469         temporary in fixups array. Reflect changed meaning of last arg to
1470         queue_fixup_recursively.
1471         (fixup): Add cgen_maybe_multi_ifield member.
1472         (make_right_shifted_expr): New function.
1473         (queue_fixup): Change to recursive function that fragments
1474         fixups if operand has a multi-ifield.
1475         (gas_cgen_parse_operand): Add RELC code to wrap expressions in
1476         symbols, call weak_operand_overflow_check, and fragment call
1477         queue_fixup with operand fields.
1478         (gas_cgen_finish_insn) Modify to manage ifield pointer.
1479         (weak_operand_overflow_check): New function to try to select
1480         insns correctly.
1481         (gas_cgen_encode_addend): New function for relc.
1482         (gas_cgen_install_complex_reloc): Likewise.
1483         (gas_cgen_tc_gen_reloc): Add hook into gas_cgen_install_complex_reloc.
1484         * write.h (struct fix): Add msb_field_p to fx_cgen sub-struct. Add
1485         cgen_maybe_multi_ifield field to fx_cgen substructure.
1486         * cgen.h (GAS_CGEN_MAX_FIXUPS): Bump from 3 up to 32.
1487         * symbols.h (symbol_relc_make_sym,value,expr): New prototypes.
1488
1489 2007-02-03  DJ Delorie  <dj@delorie.com>
1490
1491         * config/tc-m32c.c (m32c_cons_fix_new): New.  Added to support 3
1492         byte relocs.
1493         * config/tc-m32c.h (TC_CONS_FIX_NEW): Define.
1494         (m32c_cons_fix_new): Prototype.
1495
1496 2007-02-02  Bob Wilson  <bob.wilson@acm.org>
1497
1498         * config/tc-xtensa.c (xg_build_to_insn): Use tinsn_init.
1499         (xg_expand_assembly_insn, istack_push_space, istack_pop): Likewise.
1500
1501 2007-02-02  Bob Wilson  <bob.wilson@acm.org>
1502
1503         * config/tc-xtensa.c (SUFFIX_MAP, suffix_relocs): New.
1504         (xtensa_elf_suffix): Use suffix_relocs instead of local mapping table.
1505         (map_suffix_reloc_to_operator): New.
1506         (map_operator_to_reloc): New.
1507         (expression_maybe_register): Fix incorrect test of return value from
1508         xtensa_elf_suffix.  Rearrange to use map_suffix_reloc_to_operator.
1509         (xg_assemble_literal, convert_frag_immed): Use map_operator_to_reloc.
1510
1511 2007-02-02  Bob Wilson  <bob.wilson@acm.org>
1512
1513         * config/xtensa-istack.h (struct tinsn_struct): Delete fixup field.
1514         (tinsn_get_tok): Delete prototype.
1515         * config/tc-xtensa.c (tinsn_get_tok): Delete.
1516
1517 2007-02-02  Bob Wilson  <bob.wilson@acm.org>
1518
1519         * config/xtensa-relax.h (struct build_instr): Delete id field.
1520         * config/xtensa-relax.c (widen_spec_list): Remove zeros from LITERAL
1521         and LABEL tokens.
1522         (append_literal_op, append_label_op): Remove litnum/labnum arguments;
1523         set op_data fields to zero.
1524         (parse_id_constant): Delete.
1525         (build_transition): Remove code to handle numbered literals and labels.
1526
1527 2007-02-02  Bob Wilson  <bob.wilson@acm.org>
1528
1529         * config/xtensa-relax.c (build_transition): Remove code after as_fatal.
1530         (build_transition_table): Likewise.
1531
1532 2007-02-01  Bob Wilson  <bob.wilson@acm.org>
1533
1534         * config/tc-xtensa.c (xg_add_opcode_fix, md_apply_fix): Delete use of
1535         fx_tcbit.
1536         * config/tc-xtensa.h (TC_FORCE_RELOCATION_LOCAL): Remove.
1537
1538 2007-02-02  Alan Modra  <amodra@bigpond.net.au>
1539
1540         * write.h (struct fix <fx_pcrel_adjust, fx_size>): Move.
1541         (struct fix <fx_plt>): Rename to tcbit2.
1542         * write.c (fix_new_internal): Adjust.
1543         (TC_FORCE_RELOCATION_LOCAL): Don't test fx_plt.
1544         * config/tc-arm.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1545         * config/tc-cris.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1546         * config/tc-i386.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1547         * config/tc-i960.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1548         * config/tc-sh.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1549         * config/tc-sh64.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1550         * config/tc-sparc.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1551         * config/tc-msp430.c (msp430_force_relocation_local): Likewise.
1552         * config/tc-ia64.c (emit_one_bundle): Don't set fx_plt.
1553         * config/tc-ia64.h (TC_FORCE_RELOCATION_LOCAL): Don't test fx_plt.
1554         Instead, compare fx_r_type.
1555         * config/tc-xtensa.c (xg_add_opcode_fix, md_apply_fix): Use
1556         fx_tcbit in place of fx_plt.
1557         * config/tc-xtensa.h (TC_FORCE_RELOCATION_LOCAL): Define.
1558         * doc/internals.texi (TC_FORCE_RELOCATION_LOCAL): Remove reference
1559         to fx_plt.
1560
1561 2007-01-30  Nick Clifton  <nickc@redhat.com>
1562
1563         * as.c (main): Mark symbols created via the --defsym command line
1564         option as volatile so that they can be overridden later on by a
1565         .set directive.  This maintains compatibility with the behaviour
1566         of earlier versions of the assembler.
1567         * doc/as.texinfo (--defsym): Document that the defined symbol's
1568         value can be overridden via a .set directive.
1569
1570 2007-01-28  H.J. Lu  <hongjiu.lu@intel.com>
1571
1572         * config/tc-i386.c (swap_imm_operands): Renamed to ...
1573         (swap_2_operands): This.  Take 2 ints.
1574         (md_assemble): Updated.
1575         (swap_operands): Call swap_2_operands to swap 2 operands.
1576
1577 2007-01-24  DJ Delorie  <dj@redhat.com>
1578
1579         * config/tc-m32c.c (md_pseudo_table): Add .3byte.
1580
1581 2007-01-22  Nick Clifton  <nickc@redhat.com>
1582
1583         PR gas/3871
1584         * tc-score.c: Remove unnecessary uses of _().
1585         Make the err_msg[] a file level local array in order to save
1586         storage space.
1587         Remove unnecessary sprintf()s.
1588
1589 2007-01-18  Mei Ligang  <ligang@sunnorth.com.cn>
1590
1591         PR gas/3871
1592         * config/tc-score.c : Using _() for const string.
1593         Do not assign inst.error with a local string pointer.
1594         (md_section_align): Pad section.
1595
1596 2007-01-13  H.J. Lu  <hongjiu.lu@intel.com>
1597
1598         * config/tc-i386.c (build_modrm_byte): Check number of operands
1599         when procssing memory/register operand.
1600
1601 2007-01-12  Nick Clifton  <nickc@redhat.com>
1602
1603         PR gas/3856
1604         * macro.c (expand_irp): Do not ignore spaces inside quoted
1605         strings.
1606
1607 2007-01-12  Alan Modra  <amodra@bigpond.net.au>
1608
1609         * config/tc-spu.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
1610         * config/tc-m32r.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
1611         * config/tc-mn10300.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
1612         (TC_FORCE_RELOCATION): Define.
1613         (TC_FORCE_RELOCATION_LOCAL): Define.
1614         * config/tc-mn10300.c (mn10300_fix_adjustable): Adjust.
1615
1616 2007-01-12  Alan Modra  <amodra@bigpond.net.au>
1617
1618         * input-file.c (input_file_open): Check fgets return.
1619
1620 2007-01-11  Paul Brook  <paul@codesourcery.com>
1621
1622         * config/tc-arm.c (do_t_add_sub): Use Rd and Rs.
1623
1624 2007-01-11  Nick Clifton  <nickc@redhat.com>
1625
1626         PR gas/3707
1627         * config/tc-arm.c (md_begin): Cope with an NULL mcpu_fpu_opt
1628         variable.
1629
1630         * config/tc-mcore.c (md_number_to_chars): Use
1631         number_to_chars_{big|little}endian.
1632
1633 2007-01-08  Kazu Hirata  <kazu@codesourcery.com>
1634
1635         * config/tc-m68k.c (m68k_archs, m68k_cpus): Treat Fido as an
1636         architecture by itself.
1637         (m68k_ip): Don't issue a warning for tbl instructions on fido.
1638         (m68k_elf_final_processing): Treat Fido as an architecture by
1639         itself.
1640
1641 2007-01-08  Kai Tietz   <kai.tietz@onevision.com>
1642
1643         * configure.tgt: Renamed target x86_64-*-mingw64 to x86_64-*-mingw*
1644
1645 2007-01-05  H.J. Lu  <hongjiu.lu@intel.com>
1646
1647         * config/tc-i386.c (set_intel_syntax): Update set_intel_syntax
1648         depending on allow_naked_reg.
1649
1650 2007-01-04  Paul Brook  <paul@codesourcery.com>
1651
1652         * config/tc-arm.c (do_cpsi): Set mmod bit for 2 argument form.
1653
1654 2007-01-04  H.J. Lu  <hongjiu.lu@intel.com>
1655
1656         PR gas/3830
1657         * config/tc-i386.c (register_prefix): New.
1658         (set_intel_syntax): Set set_intel_syntax to "" if register
1659         prefix isn't needed.
1660         (check_byte_reg): Use register_prefix for error message.
1661         (check_long_reg): Likewise.
1662         (check_qword_reg): Likewise.
1663         (check_word_reg): Likewise.
1664
1665 2007-01-04  Julian Brown  <julian@codesourcery.com>
1666
1667         * config/tc-arm.c (do_neon_shl_imm): Swap rN, rM.
1668         (do_neon_qshl_imm): Likewise.
1669         (do_neon_rshl): New function. Handle rounding variants of
1670         v{q}shl-by-register.
1671         (insns): Use do_neon_rshl for vrshl, vqrshl.
1672
1673 2007-01-04  Paul Brook  <paul@codesourcery.com>
1674
1675         * config/tc-arm.c (NEON_ENC_TAB): Fix encoding of vclt, vcle, vaclt
1676         and vacle.
1677
1678 2007-01-03  H.J. Lu  <hongjiu.lu@intel.com>
1679
1680         * config/tc-i386.c (swap_operands): Remove branches.
1681
1682 2007-01-03  H.J. Lu  <hongjiu.lu@intel.com>
1683
1684         * config/tc-i386.c: Update copyright year.
1685         * config/tc-i386.h: Likewise.
1686
1687 2007-01-03  H.J. Lu  <hongjiu.lu@intel.com>
1688
1689         * config/tc-i386.c (smallest_imm_type): Return unsigned int
1690         instead of int.
1691
1692 2007-01-03  H.J. Lu  <hongjiu.lu@intel.com>
1693
1694         * config/tc-i386.c: Convert to ISO C90 formatting
1695         * config/tc-i386.h: Likewise.
1696
1697 2007-01-03  David Daney  <ddaney@avtrex.com>
1698
1699         * config/tc-mips.c (md_show_usage):  Clean up -mno-shared
1700         documentation.
1701
1702 For older changes see ChangeLog-2006
1703 \f
1704 Local Variables:
1705 mode: change-log
1706 left-margin: 8
1707 fill-column: 74
1708 version-control: never
1709 End: