1 2013-08-23 Yuri Chornoivan <yurchor@ukr.net>
4 * config/tc-ia64.c: Fix typos.
5 * config/tc-sparc.c: Likewise.
6 * config/tc-z80.c: Likewise.
7 * doc/c-i386.texi: Likewise.
8 * doc/c-m32r.texi: Likewise.
10 2013-08-23 Will Newton <will.newton@linaro.org>
12 * config/tc-arm.c: (do_neon_ldx_stx): Add extra constraints
13 for pre-indexed addressing modes.
15 2013-08-21 Alan Modra <amodra@gmail.com>
17 * symbols.c (fb_label_instance_inc, fb_label_instance): Properly
18 range check label number for use with fb_low_counter array.
20 2013-08-19 Richard Sandiford <rdsandiford@googlemail.com>
22 * config/tc-mips.c (mips_check_isa_supports_ase, reg_lookup)
23 (mips_parse_argument_token, validate_micromips_insn, md_begin)
24 (check_regno, match_float_constant, check_completed_insn, append_insn)
25 (match_insn, match_mips16_insn, match_insns, macro_start)
26 (macro_build_ldst_constoffset, load_register, macro, mips_ip)
27 (mips16_ip, mips_set_option_string, md_parse_option)
28 (mips_after_parse_args, mips_after_parse_args, md_pcrel_from)
29 (md_apply_fix, s_align, s_option, s_mipsset, s_tls_rel_directive)
30 (s_gpword, s_gpdword, s_ehword, s_nan, tc_gen_reloc, md_convert_frag)
31 (s_mips_end, s_mips_ent, s_mips_frame, s_mips_mask, mips_parse_cpu):
32 Start error messages with a lower-case letter. Do not end error
33 messages with a period. Wrap long messages to 80 character-lines.
34 Use "cannot" instead of "can't" and "can not".
36 2013-08-19 Richard Sandiford <rdsandiford@googlemail.com>
38 * config/tc-mips.c (imm_expr): Expand comment.
39 (set_at, macro, mips16_macro): Expect imm_expr to be O_constant
42 2013-08-19 Richard Sandiford <rdsandiford@googlemail.com>
44 * config/tc-mips.c (imm2_expr): Delete.
45 (md_assemble, match_insn, imm2_expr.X_op, mips_ip): Update accordingly.
47 2013-08-19 Richard Sandiford <rdsandiford@googlemail.com>
49 * config/tc-mips.c (report_bad_range, report_bad_field): Delete.
50 (macro): Remove M_DEXT and M_DINS handling.
52 2013-08-19 Richard Sandiford <rdsandiford@googlemail.com>
54 * config/tc-mips.c (mips_arg_info): Replace allow_nonconst and
55 lax_max with lax_match.
56 (match_int_operand): Update accordingly. Don't report an error
57 for !lax_match-only cases.
58 (match_insn): Replace more_alts with lax_match and use it to
59 initialize the mips_arg_info field. Add a complete_p parameter.
60 Handle implicit VU0 suffixes here.
61 (match_invalid_for_isa, match_insns, match_mips16_insns): New
63 (mips_ip, mips16_ip): Use them.
65 2013-08-19 Richard Sandiford <rdsandiford@googlemail.com>
67 * config/tc-mips.c (match_expression): Report uses of registers here.
68 Add a "must be an immediate expression" error. Handle elided offsets
70 (match_int_operand): ...here.
72 2013-08-19 Richard Sandiford <rdsandiford@googlemail.com>
74 * config/tc-mips.c (mips_arg_info): Remove soft_match.
75 (match_out_of_range, match_not_constant): New functions.
76 (match_const_int): Remove fallback parameter and check for soft_match.
77 Use match_not_constant.
78 (match_mapped_int_operand, match_addiusp_operand)
79 (match_perf_reg_operand, match_save_restore_list_operand)
80 (match_mdmx_imm_reg_operand): Update accordingly. Use
81 match_out_of_range and set_insn_error* instead of as_bad.
82 (match_int_operand): Likewise. Use match_not_constant in the
83 !allows_nonconst case.
84 (match_float_constant): Report invalid float constants.
85 (match_insn, match_mips16_insn): Remove soft_match code. Rely on
86 match_float_constant to check for invalid constants. Fail the
87 match if match_const_int or match_float_constant return false.
88 (mips_ip): Update accordingly.
89 (mips16_ip): Likewise. Undo null termination of instruction name
90 once lookup is complete.
92 2013-08-19 Richard Sandiford <rdsandiford@googlemail.com>
94 * config/tc-mips.c (mips_insn_error_format): New enum.
95 (mips_insn_error): New struct.
96 (insn_error): Change to a mips_insn_error.
97 (clear_insn_error, set_insn_error_format, set_insn_error)
98 (set_insn_error_i, set_insn_error_ss, report_insn_error): New
100 (mips_parse_argument_token, md_assemble, match_insn)
101 (match_mips16_insn): Use them instead of manipulating insn_error
103 (mips_ip, mips16_ip): Likewise. Simplify control flow.
105 2013-08-19 Richard Sandiford <rdsandiford@googlemail.com>
107 * config/tc-mips.c (normalize_constant_expr): Move further up file.
108 (normalize_address_expr): Likewise.
109 (match_insn, match_mips16_insn): New functions, split out from...
110 (mips_ip, mips16_ip): ...here.
112 2013-08-19 Richard Sandiford <rdsandiford@googlemail.com>
114 * config/tc-mips.c (operand_reg_mask, match_operand): Handle
116 (mips_ip, mips16_ip): Use mips_optional_operand_p to check
117 for optional operands.
119 2013-08-16 Alan Modra <amodra@gmail.com>
121 * config/tc-ppc.c (ppc_elf_cons): Allow @l and other reloc
124 2013-08-16 Alan Modra <amodra@gmail.com>
126 * config/tc-ppc.c (ppc_elf_lcomm): Use subsection 1.
128 2013-08-14 David Edelsohn <dje.gcc@gmail.com>
130 * config/tc-ppc.c (ppc_comm): Accept optional fourth .lcomm
131 argument as alignment.
133 2013-08-09 Nick Clifton <nickc@redhat.com>
135 * config/tc-rl78.c (elf_flags): New variable.
136 (enum options): Add OPTION_G10.
137 (md_longopts): Add mg10.
138 (md_parse_option): Parse -mg10.
139 (rl78_elf_final_processing): New function.
140 * config/tc-rl78.c (tc_final_processing): Define.
141 * doc/c-rl78.texi: Document -mg10 option.
143 2013-08-06 Jürgen Urban <JuergenUrban@gmx.de>
145 * config/tc-mips.c (match_vu0_suffix_operand): Allow single-channel
146 suffixes to be elided too.
147 (mips_lookup_insn): Don't reject INSN2_VU0_CHANNEL_SUFFIX here.
148 (mips_ip): Assume .xyzw if no VU0 suffix is specified. Allow +N
151 2013-08-05 John Tytgat <john@bass-software.com>
153 * po/POTFILES.in: Regenerate.
155 2013-08-05 Eric Botcazou <ebotcazou@adacore.com>
156 Konrad Eisele <konrad@gaisler.com>
158 * config/tc-sparc.c (sparc_arch_types): Add leon.
159 (sparc_arch): Move sparc4 around and add leon.
160 (sparc_target_format): Document -Aleon.
161 * doc/c-sparc.texi: Likewise.
163 2013-08-05 Richard Sandiford <rdsandiford@googlemail.com>
165 * config/tc-mips.c (mips_lookup_insn): Make length and opend signed.
167 2013-08-04 Jürgen Urban <JuergenUrban@gmx.de>
168 Richard Sandiford <rdsandiford@googlemail.com>
170 * config/tc-mips.c (MAX_OPERANDS): Bump to 6.
171 (RWARN): Bump to 0x8000000.
172 (RTYPE_VI, RTYPE_VF, RTYPE_R5900_I, RTYPE_R5900_Q, RTYPE_R5900_R)
173 (RTYPE_R5900_ACC): New register types.
174 (RTYPE_MASK): Include them.
175 (R5900_I_NAMES, R5900_Q_NAMES, R5900_R_NAMES, R5900_ACC_NAMES): New
177 (reg_names): Include them.
178 (mips_parse_register_1): New function, split out from...
179 (mips_parse_register): ...here. Add a channels_ptr parameter.
180 Look for VU0 channel suffixes when nonnull.
181 (reg_lookup): Update the call to mips_parse_register.
182 (mips_parse_vu0_channels): New function.
183 (OT_CHANNELS, OT_DOUBLE_CHAR): New mips_operand_token_types.
184 (mips_operand_token): Add a "channels" field to the union.
185 Extend the comment above "ch" to OT_DOUBLE_CHAR.
186 (mips_parse_base_start): Match -- and ++. Handle channel suffixes.
187 (mips_parse_argument_token): Handle channel suffixes here too.
188 (validate_mips_insn): Handle INSN2_VU0_CHANNEL_SUFFIX.
189 Ignore OP_VU0_MATCH_SUFFIX when calculating the used bits.
191 (md_begin): Register $vfN and $vfI registers.
192 (operand_reg_mask): Handle OP_VU0_SUFFIX and OP_VU0_MATCH_SUFFIX.
193 (convert_reg_type): Handle OP_REG_VI, OP_REG_VF, OP_REG_R5900_I,
194 OP_REG_R5900_Q, OP_REG_R5900_R and OP_REG_R5900_ACC.
195 (match_vu0_suffix_operand): New function.
196 (match_operand): Handle OP_VU0_SUFFIX and OP_VU0_MATCH_SUFFIX.
197 (macro): Use "+7" rather than "E" for LDQ2 and STQ2.
198 (mips_lookup_insn): New function.
199 (mips_ip): Use it. Allow "+K" operands to be elided at the end
200 of an instruction. Handle '#' sequences.
202 2013-08-03 Richard Sandiford <rdsandiford@googlemail.com>
204 * config/tc-mips.c (macro, mips16_macro): Create an array of operand
205 values and use it instead of sreg, treg, xreg, etc.
207 2013-08-03 Richard Sandiford <rdsandiford@googlemail.com>
209 * config/tc-mips.c (match_int_operand): Use mips_int_operand_min
210 and mips_int_operand_max.
211 (mips16_immed_operand, mips16_immed_operands, MIPS16_NUM_IMMED):
213 (mips16_immed_operand, mips16_immed_in_range_p): New functions.
214 (mips16_immed, mips16_extended_frag): Use them. Use mips_int_operand
215 instead of mips16_immed_operand.
217 2013-08-03 Richard Sandiford <rdsandiford@googlemail.com>
219 * config/tc-mips.c (mips16_macro): Don't use move_register.
220 (mips16_ip): Allow macros to use 'p'.
222 2013-08-01 Richard Sandiford <rdsandiford@googlemail.com>
224 * config/tc-mips.c (MAX_OPERANDS): New macro.
225 (mips_operand_array): New structure.
226 (mips_operands, mips16_operands, micromips_operands): New arrays.
227 (micromips_to_32_reg_b_map, micromips_to_32_reg_c_map)
228 (micromips_to_32_reg_e_map, micromips_to_32_reg_f_map)
229 (micromips_to_32_reg_g_map, micromips_to_32_reg_l_map)
230 (micromips_to_32_reg_q_map): Delete.
231 (insn_operands, insn_opno, insn_extract_operand): New functions.
232 (validate_mips_insn): Take a mips_operand_array as argument and
233 use it to build up a list of operands. Extend to handle INSN_MACRO
235 (validate_mips16_insn): New function.
236 (validate_micromips_insn): Take a mips_operand_array as argument.
238 (md_begin): Initialize mips_operands, mips16_operands and
239 micromips_operands. Call validate_mips_insn and
240 validate_micromips_insn for macro instructions too.
241 Call validate_mips16_insn for MIPS16 instructions.
242 (insn_read_mask, insn_write_mask, operand_reg_mask, insn_reg_mask):
244 (gpr_read_mask, gpr_write_mask, fpr_read_mask, fpr_write_mask): Use
245 them. Handle INSN_UDI.
246 (get_append_method): Use gpr_read_mask.
248 2013-08-01 Richard Sandiford <rdsandiford@googlemail.com>
250 * config/tc-mips.c (compact_branch_p, uncond_branch_p): Use the same
251 flags for MIPS16 and non-MIPS16 instructions.
252 (gpr_mod_mask): Move the INSN2_MOD_SP case outside the micromips block.
253 (gpr_read_mask): Use INSN2_READ_GPR_31 for MIPS16 instructions too.
254 (gpr_write_mask): Remove MIPS16_INSN_WRITE_SP handling.
255 (can_swap_branch_p, get_append_method): Use the same flags for MIPS16
256 and non-MIPS16 instructions. Fix formatting.
258 2013-08-01 Richard Sandiford <rdsandiford@googlemail.com>
260 * config/tc-mips.c (reg_needs_delay): Move later in file.
262 (insns_between): Use gpr_read_mask instead of EXTRACT_OPERAND.
264 2013-07-26 Sergey Guriev <sergey.s.guriev@intel.com>
265 Alexander Ivchenko <alexander.ivchenko@intel.com>
266 Maxim Kuznetsov <maxim.kuznetsov@intel.com>
267 Sergey Lega <sergey.s.lega@intel.com>
268 Anna Tikhonova <anna.tikhonova@intel.com>
269 Ilya Tocar <ilya.tocar@intel.com>
270 Andrey Turetskiy <andrey.turetskiy@intel.com>
271 Ilya Verbin <ilya.verbin@intel.com>
272 Kirill Yukhin <kirill.yukhin@intel.com>
273 Michael Zolotukhin <michael.v.zolotukhin@intel.com>
275 * config/tc-i386-intel.c (O_zmmword_ptr): New.
276 (i386_types): Add zmmword.
277 (i386_intel_simplify_register): Allow regzmm.
278 (i386_intel_simplify): Handle zmmwords.
279 (i386_intel_operand): Handle RC/SAE, vector operations and
281 * config/tc-i386.c (ZMMWORD_MNEM_SUFFIX): New.
282 (struct RC_Operation): New.
283 (struct Mask_Operation): New.
284 (struct Broadcast_Operation): New.
285 (vex_prefix): Size of bytes increased to 4 to support EVEX
287 (enum i386_error): Add new error codes: unsupported_broadcast,
288 broadcast_not_on_src_operand, broadcast_needed,
289 unsupported_masking, mask_not_on_destination, no_default_mask,
290 unsupported_rc_sae, rc_sae_operand_not_last_imm,
291 invalid_register_operand, try_vector_disp8.
292 (struct _i386_insn): Add new fields vrex, need_vrex, mask,
293 rounding, broadcast, memshift.
294 (struct RC_name): New.
295 (RC_NamesTable): New.
298 (extra_symbol_chars): Add '{'.
299 (cpu_arch): Add AVX512F, AVX512CD, AVX512ER and AVX512PF.
300 (i386_operand_type): Add regzmm, regmask and vec_disp8.
301 (match_mem_size): Handle zmmwords.
302 (operand_type_match): Handle zmm-registers.
303 (mode_from_disp_size): Handle vec_disp8.
304 (fits_in_vec_disp8): New.
305 (md_begin): Handle {} properly.
306 (type_names): Add "rZMM", "Mask reg" and "Vector d8".
307 (build_vex_prefix): Handle vrex.
308 (build_evex_prefix): New.
309 (process_immext): Adjust to properly handle EVEX.
310 (md_assemble): Add EVEX encoding support.
311 (swap_2_operands): Correctly handle operands with masking,
312 broadcasting or RC/SAE.
313 (check_VecOperands): Support EVEX features.
314 (VEX_check_operands): Properly handle 16 upper [xyz]mm registers.
315 (match_template): Support regzmm and handle new error codes.
316 (process_suffix): Handle zmmwords and zmm-registers.
317 (check_byte_reg): Extend to zmm-registers.
318 (process_operands): Extend to zmm-registers.
319 (build_modrm_byte): Handle EVEX.
320 (output_insn): Adjust to properly handle EVEX case.
321 (disp_size): Handle vec_disp8.
322 (output_disp): Support compressed disp8*N evex feature.
323 (output_imm): Handle RC/SAE immediates properly.
324 (check_VecOperations): New.
325 (i386_immediate): Handle EVEX features.
326 (i386_index_check): Handle zmmwords and zmm-registers.
327 (RC_SAE_immediate): New.
328 (i386_att_operand): Handle EVEX features.
329 (parse_real_register): Add a check for ZMM/Mask registers.
330 (OPTION_MEVEXLIG): New.
331 (OPTION_MEVEXWIG): New.
332 (md_longopts): Add mevexlig and mevexwig.
333 (md_parse_option): Handle mevexlig and mevexwig options.
334 (md_show_usage): Add description for mevexlig and mevexwig.
335 * doc/c-i386.texi: Document avx512f/.avx512f, avx512cd/.avx512cd,
336 avx512er/.avx512er, avx512pf/.avx512pf, mevexlig and mevexwig.
338 2013-07-25 Michael Zolotukhin <michael.v.zolotukhin@intel.com>
340 * config/tc-i386.c (cpu_arch): Add .sha.
341 * doc/c-i386.texi: Document sha/.sha.
343 2013-07-24 Anna Tikhonova <anna.tikhonova@intel.com>
344 Kirill Yukhin <kirill.yukhin@intel.com>
345 Michael Zolotukhin <michael.v.zolotukhin@intel.com>
347 * config/tc-i386.c (BND_PREFIX): New.
348 (struct _i386_insn): Add new field bnd_prefix.
349 (add_bnd_prefix): New.
351 (i386_operand_type): Add regbnd.
352 (md_assemble): Handle BND prefixes.
353 (parse_insn): Likewise.
354 (output_branch): Likewise.
355 (output_jump): Likewise.
356 (build_modrm_byte): Handle regbnd.
357 (OPTION_MADD_BND_PREFIX): New.
358 (md_longopts): Add entry for 'madd-bnd-prefix'.
359 (md_parse_option): Handle madd-bnd-prefix option.
360 (md_show_usage): Add description for madd-bnd-prefix
362 * doc/c-i386.texi: Document mpx/.mpx and -madd-bnd-prefix.
364 2013-07-24 Tristan Gingold <gingold@adacore.com>
366 * config/tc-ppc.c (md_apply_fix): Adjust BFD_RELOC_PPC_B16 on
369 2013-07-24 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
371 * config/tc-s390.c (s390_machine): Don't force the .machine
372 argument to lower case.
374 2013-07-22 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
376 * config/tc-arm.c (s_arm_arch_extension): Improve error message
377 for invalid extension.
379 2013-07-19 Yufeng Zhang <yufeng.zhang@arm.com>
381 * config/tc-aarch64.c (enum aarch64_abi_type): New enumeration tag.
382 (AARCH64_ABI_LP64, AARCH64_ABI_ILP32): New enumerators.
383 (aarch64_abi): New variable.
384 (ilp32_p): Change to be a macro.
385 (aarch64_opts): Remove the support for option -milp32 and -mlp64.
386 (struct aarch64_option_abi_value_table): New struct.
387 (aarch64_abis): New table.
388 (aarch64_parse_abi): New function.
389 (aarch64_long_opts): Add entry for -mabi=.
390 * doc/as.texinfo (Target AArch64 options): Document -mabi.
391 * doc/c-aarch64.texi: Likewise.
393 2013-07-18 Jim Thomas <thomas@cfht.hawaii.edu>
395 * config/tc-i386-intel.c (i386_intel_operand): Fixed signed vs
398 2013-07-18 Sandeep Kumar Singh <Sandeep.Singh2@kpitcummins.com>
400 * config/rx-defs.h: Add macros for RX100, RX200, RX600, and
402 * config/rx-parse.y: (rx_check_float_support): Add function to
403 check floating point operation support for target RX100 and
405 * config/tc-rx.c: Add CPU options RX100, RX200, RX600, and RX610.
406 * doc/c-rx.texi: Add -mcpu option to recognize macros for RX100,
407 RX200, RX600, and RX610
409 2013-07-18 Senthil Kumar Selvaraj <senthil_kumar.selvaraj@atmel.com>
411 * config/tc-avr.c (md_show_usage): Add avrxmega2 to help text
413 2013-07-18 Vishnu K.S <vishnu.k_s@atmel.com>
415 * config/tc-avr.c: Make ata6289's ISA to AVR_ISA_AVR4.
416 * doc/c-avr.texi: Likewise.
418 2013-07-15 Richard Sandiford <rdsandiford@googlemail.com>
420 * config/tc-mips.c (match_save_restore_list_operand): Avoid -Wformat
421 error with older GCCs.
422 (mips16_macro_build): Dereference args.
424 2013-07-14 Richard Sandiford <rdsandiford@googlemail.com>
426 * config/tc-mips.c (mips_prefer_vec_regno, mips_parse_register):
427 New functions, split out from...
428 (reg_lookup): ...here. Remove itbl support.
429 (reglist_lookup): Delete.
430 (mips_operand_token_type): New enum.
431 (mips_operand_token): New structure.
432 (mips_operand_tokens): New variable.
433 (mips_add_token, mips_parse_base_start, mips_parse_argument_token)
434 (mips_parse_arguments): New functions.
435 (md_begin): Initialize mips_operand_tokens.
436 (mips_arg_info): Add a token field. Remove optional_reg field.
437 (match_char, match_expression): New functions.
438 (match_const_int): Use match_expression. Remove "s" argument
439 and return a boolean result. Remove O_register handling.
440 (match_regno, match_reg, match_reg_range): New functions.
441 (match_int_operand, match_mapped_int_operand, match_msb_operand)
442 (match_reg_operand, match_reg_pair_operand, match_perf_reg_operand)
443 (match_addiusp_operand, match_clo_clz_dest_operand)
444 (match_lwm_swm_list_operand, match_entry_exit_operand)
445 (match_save_restore_list_operand, match_mdmx_imm_reg_operand)
446 (match_tied_reg_operand): Remove "s" argument and return a boolean
447 result. Match tokens rather than text. Update calls to
448 match_const_int. Rely on match_regno to call check_regno.
449 (match_pcrel_operand, match_pc_operand): Replace "s" argument with
450 "arg" argument. Return a boolean result.
451 (parse_float_constant): Replace with...
452 (match_float_constant): ...this new function.
453 (match_operand): Remove "s" argument and return a boolean result.
454 Update calls to subfunctions.
455 (mips_ip, mips16_ip): Call mips_parse_arguments. Use match routines
456 rather than string-parsing routines. Update handling of optional
457 registers for token scheme.
459 2013-07-14 Richard Sandiford <rdsandiford@googlemail.com>
461 * config/tc-mips.c (parse_float_constant): Split out from...
464 2013-07-14 Richard Sandiford <rdsandiford@googlemail.com>
466 * config/tc-mips.c (INSERT_BITS, INSERT_OPERAND, MIPS16_INSERT_OPERAND):
469 2013-07-14 Richard Sandiford <rdsandiford@googlemail.com>
471 * config/tc-mips.c (mips32_to_16_reg_map): Delete.
472 (match_entry_exit_operand): New function.
473 (match_save_restore_list_operand): Likewise.
474 (match_operand): Use them.
475 (check_absolute_expr): Delete.
476 (mips16_ip): Rewrite main parsing loop to use mips_operands.
478 2013-07-14 Richard Sandiford <rdsandiford@googlemail.com>
480 * config/tc-mips.c: Enable functions commented out in previous patch.
481 (SKIP_SPACE_TABS): Move further up file.
482 (mips32_to_micromips_reg_b_map, mips32_to_micromips_reg_c_map)
483 (mips32_to_micromips_reg_d_map, mips32_to_micromips_reg_e_map)
484 (ips32_to_micromips_reg_f_map, mips32_to_micromips_reg_g_map)
485 (mips32_to_micromips_reg_l_map, mips32_to_micromips_reg_m_map)
486 (mips32_to_micromips_reg_q_map, mips32_to_micromips_reg_n_map)
487 (micromips_imm_b_map, micromips_imm_c_map): Delete.
488 (mips_lookup_reg_pair): Delete.
489 (macro): Use report_bad_range and report_bad_field.
490 (mips_immed, expr_const_in_range): Delete.
491 (mips_ip): Rewrite main parsing loop to use new functions.
493 2013-07-14 Richard Sandiford <rdsandiford@googlemail.com>
495 * config/tc-mips.c (mips_oddfpreg_ok): Move further up file.
496 Change return type to bfd_boolean.
497 (report_bad_range, report_bad_field): New functions.
498 (mips_arg_info): New structure.
499 (match_const_int, convert_reg_type, check_regno, match_int_operand)
500 (match_mapped_int_operand, match_msb_operand, match_reg_operand)
501 (match_reg_pair_operand, match_pcrel_operand, match_perf_reg_operand)
502 (match_addiusp_operand, match_clo_clz_dest_operand)
503 (match_lwm_swm_list_operand, match_mdmx_imm_reg_operand)
504 (match_pc_operand, match_tied_reg_operand, match_operand)
505 (check_completed_insn): New functions, commented out for now.
507 2013-07-14 Richard Sandiford <rdsandiford@googlemail.com>
509 * config/tc-mips.c (insn_insert_operand): New function.
510 (macro_build, mips16_macro_build): Put null character check
511 in the for loop and convert continues to breaks. Use operand
512 structures to handle constant operands.
514 2013-07-14 Richard Sandiford <rdsandiford@googlemail.com>
516 * config/tc-mips.c (validate_mips_insn): Move further up file.
517 Add insn_bits and decode_operand arguments. Use the mips_operand
518 fields to work out which bits an operand occupies. Detect double
520 (validate_micromips_insn): Move further up file. Call into
523 2013-07-14 Richard Sandiford <rdsandiford@googlemail.com>
525 * config/tc-mips.c (mips16_macro_build): Remove 'Y' case.
527 2013-07-14 Richard Sandiford <rdsandiford@googlemail.com>
529 * config/tc-mips.c (macro_build): Take an int for "C", "k", "\\"
531 (macro): Update accordingly.
533 2013-07-14 Richard Sandiford <rdsandiford@googlemail.com>
535 * config/tc-mips.c (imm_expr, imm2_expr, offset_expr): Tweak commentary.
537 (md_assemble): Remove imm_reloc handling.
538 (mips_ip): Update commentary. Use offset_expr and offset_reloc
539 rather than imm_expr and imm_reloc for 'i', 'j' and 'u'.
540 Use a temporary array rather than imm_reloc when parsing
541 constant expressions. Remove imm_reloc initialization.
542 (mips16_ip): Update commentary. Use offset_expr and offset_reloc
543 for the relaxable field. Use a relax_char variable to track the
544 type of this field. Remove imm_reloc initialization.
546 2013-07-14 Richard Sandiford <rdsandiford@googlemail.com>
548 * config/tc-mips.c (mips16_ip): Handle "I".
550 2013-07-12 Maciej W. Rozycki <macro@codesourcery.com>
552 * config/tc-mips.c (mips_flag_nan2008): New variable.
553 (options): Add OPTION_NAN enum value.
554 (md_longopts): Handle it.
555 (md_parse_option): Likewise.
556 (s_nan): New function.
557 (mips_elf_final_processing): Handle EF_MIPS_NAN2008.
558 (md_show_usage): Add -mnan.
560 * doc/as.texinfo (Overview): Add -mnan.
561 * doc/c-mips.texi (MIPS Opts): Document -mnan.
562 (MIPS NaN Encodings): New node. Document .nan directive.
563 (MIPS-Dependent): List the new node.
565 2013-07-09 Tristan Gingold <gingold@adacore.com>
567 * configure.com: Define HAVE_SYS_TYPES_H and HAVE_UNISTD_H
569 2013-07-08 Richard Sandiford <rdsandiford@googlemail.com>
571 * config/tc-mips.c (mips_ip): Unconditionally parse an expression
572 for 'A' and assume that the constant has been elided if the result
575 2013-07-07 Richard Sandiford <rdsandiford@googlemail.com>
577 * config/tc-mips.c (gprel16_reloc_p): New function.
578 (macro_read_relocs): Assume BFD_RELOC_LO16 if all relocs are
580 (offset_high_part, small_offset_p): New functions.
581 (nacro): Use them. Remove *_OB and *_DOB cases. For single-
582 register load and store macros, handle the 16-bit offset case first.
583 If a 16-bit offset is not suitable for the instruction we're
584 generating, load it into the temporary register using
585 ADDRESS_ADDI_INSN. Make the M_LI_DD code fall through into the
586 M_L_DAB code once the address has been constructed. For double load
587 and store macros, again handle the 16-bit offset case first.
588 If the second register cannot be accessed from the same high
589 part as the first, load it into AT using ADDRESS_ADDI_INSN.
590 Fix the handling of LD in cases where the first register is the
591 same as the base. Also handle the case where the offset is
592 not 16 bits and the second register cannot be accessed from the
593 same high part as the first. For unaligned loads and stores,
594 fuse the offbits == 12 and old "ab" handling. Apply this handling
595 whenever the second offset needs a different high part from the first.
596 Construct the offset using ADDRESS_ADDI_INSN where possible,
597 for offbits == 16 as well as offbits == 12. Use offset_reloc
598 when constructing the individual loads and stores.
599 (mips_ip): Set up imm_expr, imm2_expr, offset_expr, imm_reloc
600 and offset_reloc before matching against a particular opcode.
601 Handle elided 'A' constants. Allow 'A' constants to use
602 relocation operators.
604 2013-07-07 Richard Sandiford <rdsandiford@googlemail.com>
606 * config/tc-mips.c (validate_mips_insn): Remove "[" and "]" handling.
607 (mips_ip): Likewise. Do not set is_mdmx for INSN_5400 instructions.
608 Check constraints on the VR5400 RZU.OB, SLL.OB and SRL.OB instructions.
610 2013-07-07 Richard Sandiford <rdsandiford@googlemail.com>
612 * config/tc-mips.c (mips_ip): Preserve the real bit number for "+p".
613 Require the msb to be <= 31 for "+s". Check that the size is <= 31
614 for both "+s" and "+S".
616 2013-07-07 Richard Sandiford <rdsandiford@googlemail.com>
618 * config/tc-mips.c (validate_mips_insn, validate_micromips_insn):
619 (mips_ip, mips16_ip): Handle "+i".
621 2013-07-07 Richard Sandiford <rdsandiford@googlemail.com>
623 * config/tc-mips.c (mips32_to_micromips_reg_h_map): Delete.
624 (micromips_to_32_reg_h_map): Rename to...
625 (micromips_to_32_reg_h_map1): ...this.
626 (micromips_to_32_reg_i_map): Rename to...
627 (micromips_to_32_reg_h_map2): ...this.
628 (mips_lookup_reg_pair): New function.
629 (gpr_write_mask, macro): Adjust after above renaming.
630 (validate_micromips_insn): Remove "mi" handling.
631 (mips_ip): Likewise. Parse both registers in a pair for "mh".
633 2013-07-07 Richard Sandiford <rdsandiford@googlemail.com>
635 * config/tc-mips.c (validate_mips_insn, validate_micromips_insn)
636 (mips_ip): Remove "+D" and "+T" handling.
638 2013-07-05 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
640 * config/tc-s390.c (md_gather_operands, md_apply_fix): Support new
643 2013-07-03 Marcus Shawcroft <marcus.shawcroft@arm.com>
645 * config/tc-aarch64.c (reloc_table): Merge got_prel19 into got.
647 2013-07-02 Marcus Shawcroft <marcus.shawcroft@arm.com>
649 * config/tc-aarch64.c (md_apply_fix): Reorder case values.
650 (aarch64_force_relocation): Likewise.
652 2013-07-02 Alan Modra <amodra@gmail.com>
654 * config/tc-ppc.c (ppc_elf_adjust_symtab): Don't make .TOC. weak.
656 2013-06-26 Maciej W. Rozycki <macro@codesourcery.com>
658 * doc/as.texinfo (Overview): Remove @samp from MIPS ISA names.
659 * doc/c-mips.texi (MIPS Options): Remove @sc from MIPS ISA names.
660 Replace @sc{mips16} with literal `MIPS16'.
661 (MIPS ISA): Replace @sc{mips3} with literal `MIPS III'.
663 2013-06-26 Yufeng Zhang <yufeng.zhang@arm.com>
665 * config/tc-aarch64.c (reloc_table): Replace
666 BFD_RELOC_AARCH64_LD64_GOT_LO12_NC with
667 BFD_RELOC_AARCH64_LD_GOT_LO12_NC; likewise to
668 BFD_RELOC_AARCH64_TLSDESC_LD64_LO12_NC and
669 BFD_RELOC_AARCH64_TLSIE_LD_GOTTPREL_LO12_NC.
670 (md_apply_fix): Handle BFD_RELOC_AARCH64_LD_GOT_LO12_NC,
671 BFD_RELOC_AARCH64_LD32_GOT_LO12_NC,
672 BFD_RELOC_AARCH64_TLSDESC_LD_LO12_NC,
673 BFD_RELOC_AARCH64_TLSDESC_LD32_LO12_NC,
674 BFD_RELOC_AARCH64_TLSIE_LD_GOTTPREL_LO12_NC and
675 BFD_RELOC_AARCH64_TLSIE_LD32_GOTTPREL_LO12_NC.
676 (aarch64_force_relocation): Likewise.
678 2013-06-26 Yufeng Zhang <yufeng.zhang@arm.com>
680 * config/tc-aarch64.c (ilp32_p): New static variable.
681 (elf64_aarch64_target_format): Return the target according to the
683 (md_begin): Determine 'mach' according to the value of 'ilp32_p'.
684 (aarch64_opts): Add support for options '-milp32' and '-mlp64'.
685 (aarch64_dwarf2_addr_size): New function.
686 * config/tc-aarch64.h (aarch64_dwarf2_addr_size): New declaration.
687 (DWARF2_ADDR_SIZE): New define.
689 2013-06-26 Richard Sandiford <rdsandiford@googlemail.com>
691 * doc/c-mips.texi: Use ISA instead of @sc{isa}.
693 2013-06-26 Richard Sandiford <rdsandiford@googlemail.com>
695 * config/tc-mips.c (validate_mips_insn): Use STYPE rather than SHAMT.
697 2013-06-25 Maciej W. Rozycki <macro@codesourcery.com>
699 * config/tc-mips.c (mips_set_options): Add insn32 member.
700 (mips_opts): Initialize it.
701 (NOP_INSN, NOP_INSN_SIZE): Handle insn32 mode.
702 (options): Add OPTION_INSN32 and OPTION_NO_INSN32 enum values.
703 (md_longopts): Add "minsn32" and "mno-insn32" options.
704 (is_size_valid): Handle insn32 mode.
705 (md_assemble): Pass instruction string down to macro.
706 (brk_fmt): Add second dimension and insn32 mode initializers.
707 (mfhl_fmt): Likewise.
708 (BRK_FMT, MFHL_FMT): Handle insn32 mode.
709 (macro_build) <'c'>: Handle microMIPS 32-bit BREAK encoding.
710 (macro_build_jalr, move_register): Handle insn32 mode.
711 (macro_build_branch_rs): Likewise.
712 (macro): Handle insn32 mode.
713 <M_JRADDIUSP>, <M_JRC>, <M_MOVEP>: New cases.
714 (mips_ip): Handle insn32 mode.
715 (md_parse_option): Handle OPTION_INSN32 and OPTION_NO_INSN32.
716 (s_mipsset): Handle "insn32" and "noinsn32" pseudo-ops.
717 (mips_handle_align): Handle insn32 mode.
718 (md_show_usage): Add -minsn32 and -mno-insn32.
720 * doc/as.texinfo (Target MIPS options): Add -minsn32 and
722 (-minsn32, -mno-insn32): New options.
723 * doc/c-mips.texi (MIPS Opts): Add -minsn32 and -mno-insn32
725 (MIPS assembly options): New node. Document .set insn32 and
727 (MIPS-Dependent): List the new node.
729 2013-06-25 Nick Clifton <nickc@redhat.com>
731 * config/tc-msp430.c (msp430_srcoperand): Do not allow the use of
732 the PC in indirect addressing on 430xv2 parts.
733 (msp430_operands): Add version test to hardware bug encoding
736 2013-06-24 Roland McGrath <mcgrathr@google.com>
738 * config/tc-arm.c (parse_reg_list): Use skip_past_char for '}',
739 so it skips whitespace before it.
740 (s_arm_unwind_save_mmxwr, s_arm_unwind_save_mmxwcg): Likewise.
742 * config/tc-arm.c (arm_symbol_chars): Include '{' and '}'.
743 (arm_reg_parse_multi): Skip whitespace first.
744 (parse_reg_list): Likewise.
745 (parse_vfp_reg_list): Likewise.
746 (s_arm_unwind_save_mmxwcg): Likewise.
748 2013-06-24 Nick Clifton <nickc@redhat.com>
751 * config/tc-arm.c (do_t_smc): Mark as ending an IT block.
753 2013-06-23 Richard Sandiford <rdsandiford@googlemail.com>
755 * config/tc-mips.c (mips_ip): Fix swapped bit numbers in comments.
757 2013-06-23 Richard Sandiford <rdsandiford@googlemail.com>
759 * config/tc-mips.c: Assert that offsetT and valueT are at least
761 (GPR_SMIN, GPR_SMAX): New macros.
762 (macro, mips_ip): Remove code for 4-byte valueT and offsetT.
764 2013-06-22 Richard Sandiford <rdsandiford@googlemail.com>
766 * config/tc-mips.c: Remove OBJ_ELF, OBJ_MAYBE_ELF and IS_ELF
767 conditions. Remove any code deselected by them.
768 (s_mips_frame, s_mips_mask): Handle ECOFF_DEBUGGING case first.
770 2013-06-22 Richard Sandiford <rdsandiford@googlemail.com>
772 * NEWS: Note removal of ECOFF support.
773 * doc/as.texinfo (--emulation): Update for the removal of MIPS ECOFF.
774 * Makefile.am (TARG_ENV_HFILES): Remove config/te-lnews.h.
775 (MULTI_CFILES): Remove config/e-mipsecoff.c.
776 * Makefile.in: Regenerate.
777 * configure.in: Remove MIPS ECOFF references.
778 (mips-sony-bsd*, mips-*-bsd*, mips-*-lnews*-ecoff, mips-*-*-ecoff):
780 (mips-*-irix5*-*, mips*-*-linux*-*, mips*-*-freebsd*)
781 (mips*-*-kfreebsd*-gnu, mips-*-*-elf): Fold into...
782 (mips-*-*): ...this single case.
783 (mipsbecoff, mipslecoff, mipsecoff): Remove emulations. Expect
784 MIPS emulations to be e-mipself*.
785 * configure: Regenerate.
786 * configure.tgt (mips-sony-bsd*, mips-*-ultrix*, mips-*-osf*)
787 (mips-*-ecoff*, mips-*-pe*, mips-*-irix*, ips-*-lnews*, mips-*-riscos*)
788 (mips-*-sysv*): Remove coff and ecoff cases.
789 * as.c (mipsbecoff, mipslecoff, mipsecoff): Remove.
790 * ecoff.c: Remove reference to MIPS ECOFF.
791 * config/e-mipsecoff.c, config/te-lnews.h: Delete files.
792 * config/tc-mips.c (ECOFF_LITTLE_FORMAT): Delete.
793 (RDATA_SECTION_NAME, mips_target_form): Remove COFF and ECOFF cases.
794 (mips_hi_fixup): Tweak comment.
795 (append_insn): Require a howto.
796 (mips_after_parse_args): Remove OBJ_MAYBE_ECOFF code.
798 2013-06-22 Richard Sandiford <rdsandiford@googlemail.com>
800 * doc/as.texinfo: Use MIPS rather than @sc{mips} throughout.
801 Use "CPU" instead of "cpu".
802 * doc/c-mips.texi: Likewise.
803 (MIPS Opts): Rename to MIPS Options.
804 (MIPS option stack): Rename to MIPS Option Stack.
805 (MIPS ASE instruction generation overrides): Rename to
806 MIPS ASE Instruction Generation Overrides (for now).
807 (MIPS floating-point): Rename to MIPS Floating-Point.
809 2013-06-22 Richard Sandiford <rdsandiford@googlemail.com>
811 * doc/c-mips.texi (MIPS Macros): New section.
812 (MIPS Object): Replace with...
813 (MIPS Small Data): ...this new section.
815 2013-06-22 Richard Sandiford <rdsandiford@googlemail.com>
817 * doc/c-mips.texi (MIPS symbol sizes): Move section further up file.
818 Capitalize name. Use @kindex instead of @cindex for .set entries.
820 2013-06-22 Richard Sandiford <rdsandiford@googlemail.com>
822 * doc/c-mips.texi (MIPS Stabs): Remove section.
824 2013-06-20 Richard Sandiford <rdsandiford@googlemail.com>
826 * config/tc-mips.c (ISA_SUPPORTS_SMARTMIPS, ISA_SUPPORTS_DSP_ASE)
827 (ISA_SUPPORTS_DSP64_ASE, ISA_SUPPORTS_DSPR2_ASE, ISA_SUPPORTS_EVA_ASE)
828 (ISA_SUPPORTS_MT_ASE, ISA_SUPPORTS_MCU_ASE, ISA_SUPPORTS_VIRT_ASE)
829 (ISA_SUPPORTS_VIRT64_ASE): Delete.
830 (mips_ase): New structure.
831 (mips_ases): New table.
832 (FP64_ASES): New macro.
833 (mips_ase_groups): New array.
834 (mips_isa_rev, mips_ase_mask, mips_check_isa_supports_ase)
835 (mips_check_isa_supports_ases, mips_set_ase, mips_lookup_ase): New
837 (is_opcode_valid): Use mips_ases to get the 64-bit ASE flags.
838 (md_parse_option): Use mips_ases and mips_set_ase instead of
839 separate case statements for each ASE option.
840 (mips_after_parse_args): Use FP64_ASES. Use
841 mips_check_isa_supports_ases to check the ASEs against
843 (s_mipsset): Use mips_ases and mips_set_ase instead of
844 separate if statements for each ASE option. Use
845 mips_check_isa_supports_ases, even when a non-ASE option
848 2013-06-19 Greta Yorsh <Greta.Yorsh@arm.com>
850 * config/tc-arm.c (arm_cpus): Add support for Cortex-A12.
852 2013-06-18 Richard Sandiford <rdsandiford@googlemail.com>
854 * config/tc-mips.c (md_shortopts, options, md_longopts)
855 (md_longopts_size): Move earlier in file.
857 2013-06-18 Richard Sandiford <rdsandiford@googlemail.com>
859 * config/tc-mips.c (mips_set_options): Replace separate "ase_*" fields
860 with a single "ase" bitmask.
861 (mips_opts): Update accordingly.
862 (file_ase, file_ase_explicit): New variables.
863 (file_ase_mips3d, file_ase_mdmx, file_ase_smartmips, file_ase_dsp)
864 (file_ase_dspr2, file_ase_eva, file_ase_mt, file_ase_virt): Delete.
865 (ISA_HAS_ROR): Adjust for mips_set_options change.
866 (is_opcode_valid): Take the base ase mask directly from mips_opts.
867 (mips_ip): Adjust for mips_set_options change.
868 (md_parse_option): Likewise. Update file_ase_explicit.
869 (mips_after_parse_args): Adjust for mips_set_options change.
870 Use bitmask operations to select the default ASEs. Set file_ase
871 rather than individual per-ASE variables.
872 (s_mipsset): Adjust for mips_set_options change.
873 (mips_elf_final_processing): Test file_ase rather than
874 file_ase_mdmx. Remove commented-out code.
876 2013-06-18 Richard Sandiford <rdsandiford@googlemail.com>
878 * config/tc-mips.c (mips_cpu_info): Add an "ase" field.
879 (MIPS_CPU_ASE_SMARTMIPS, MIPS_CPU_ASE_DSP, MIPS_CPU_ASE_MT)
880 (MIPS_CPU_ASE_MIPS3D, MIPS_CPU_ASE_MDMX, MIPS_CPU_ASE_DSPR2)
881 (MIPS_CPU_ASE_MCU, MIPS_CPU_ASE_VIRT, MIPS_CPU_ASE_EVA): Delete.
882 (mips_after_parse_args): Use the new "ase" field to choose
884 (mips_cpu_info_table): Move ASEs from the "flags" field to the
887 2013-06-18 Richard Earnshaw <rearnsha@arm.com>
889 * config/tc-arm.c (symbol_preemptible): New function.
890 (relax_branch): Use it.
892 2013-06-17 Catherine Moore <clm@codesourcery.com>
893 Maciej W. Rozycki <macro@codesourcery.com>
894 Chao-Ying Fu <fu@mips.com>
896 * config/tc-mips.c (mips_set_options): Add ase_eva.
897 (mips_set_options mips_opts): Add ase_eva.
898 (file_ase_eva): Declare.
899 (ISA_SUPPORTS_EVA_ASE): Define.
900 (IS_SEXT_9BIT_NUM): Define.
901 (MIPS_CPU_ASE_EVA): Define.
902 (is_opcode_valid): Add support for ase_eva.
903 (macro_build): Likewise.
905 (validate_mips_insn): Likewise.
906 (validate_micromips_insn): Likewise.
908 (options): Add OPTION_EVA and OPTION_NO_EVA.
909 (md_longopts): Add -meva and -mno-eva.
910 (md_parse_option): Process new options.
911 (mips_after_parse_args): Check for valid EVA combinations.
912 (s_mipsset): Likewise.
914 2013-06-14 Richard Sandiford <rsandifo@linux.vnet.ibm.com>
916 * dwarf2dbg.h (dwarf2_move_insn): Declare.
917 * dwarf2dbg.c (line_subseg): Add pmove_tail.
918 (get_line_subseg): Add create_p argument. Initialize pmove_tail.
919 (dwarf2_gen_line_info_1): Update call accordingly.
920 (dwarf2_move_insn): New function.
921 * config/tc-mips.c (append_insn): Use dwarf2_move_insn.
923 2013-06-14 Richard Sandiford <rsandifo@linux.vnet.ibm.com>
927 2011-09-05 Richard Sandiford <rdsandiford@googlemail.com>
930 * dwarf2dbg.c (pending_lines, pending_lines_tail): New variables.
931 (dwarf2_gen_line_info_1): Delete.
932 (dwarf2_push_line, dwarf2_flush_pending_lines): New functions.
933 (dwarf2_gen_line_info, dwarf2_emit_label): Use them.
934 (dwarf2_consume_line_info): Call dwarf2_flush_pending_lines.
935 (dwarf2_directive_loc): Push previous .locs instead of generating
938 2013-06-13 Chao-ying Fu <Chao-ying.Fu@imgtec.com>
940 * config/tc-mips.c (ISA_SUPPORTS_VIRT_ASE): Support micromips.
941 (ISA_SUPPORTS_VIRT64_ASE): Support 64-bit micromips.
943 2013-06-13 Nick Clifton <nickc@redhat.com>
946 * config/tc-m68k.h (TC_CHECK_ADJUSTED_BROKEN_DOT_WORD): Define.
947 * config/tc-m68k.c (tc_m68k_check_adjusted_broken_word): New
948 function. Generates an error if the adjusted offset is out of a
951 2013-06-12 Sandra Loosemore <sandra@codesourcery.com>
953 * config/tc-nios2.c (md_apply_fix): Mask constant
954 BFD_RELOC_NIOS2_HIADJ16 value to 16 bits.
956 2013-06-10 Maciej W. Rozycki <macro@codesourcery.com>
958 * config/tc-mips.c (append_insn): Don't do branch relaxation for
959 MIPS-3D instructions either.
960 (md_convert_frag): Update the COPx branch mask accordingly.
962 * config/tc-mips.c (md_show_usage): Document --[no-]relax-branch
964 * doc/as.texinfo (Overview): Add --relax-branch and
966 * doc/c-mips.texi (MIPS Opts): Document --relax-branch and
969 2013-06-09 Sandra Loosemore <sandra@codesourcery.com>
971 * config/tc-nios2.c (nios2_parse_args): Allow trap argument to
974 2013-06-08 Catherine Moore <clm@codesourcery.com>
976 * config/tc-mips.c (is_opcode_valid): Build ASE mask.
977 (is_opcode_valid_16): Pass ase value to opcode_is_member.
978 (append_insn): Change INSN_xxxx to ASE_xxxx.
980 2013-06-01 George Thomas <george.thomas@atmel.com>
982 * gas/config/tc-avr.c: Change ISA for devices with USB support to
985 2013-05-31 H.J. Lu <hongjiu.lu@intel.com>
987 * config/tc-i386.c (md_begin): Don't align text/data/bss sections
990 2013-05-31 Paul Brook <paul@codesourcery.com>
992 * config/tc-mips.c (s_ehword): New.
994 2013-05-30 Paul Brook <paul@codesourcery.com>
996 * config/tc-mips.c (md_apply_fix): Support BFD_RELOC_MIPS_EH.
998 2013-05-29 Maciej W. Rozycki <macro@codesourcery.com>
1000 * write.c (resolve_reloc_expr_symbols): On REL targets don't
1001 convert relocs who have no relocatable field either. Rephrase
1002 the conditional so that the PC-relative check is only applied
1005 2013-05-28 Chao-ying Fu <Chao-ying.Fu@imgtec.com>
1007 * config/tc-mips.c (macro) <ld>: Don't use $zero for address
1010 2013-05-28 Yufeng Zhang <yufeng.zhang@arm.com>
1012 * config/tc-aarch64.c (reloc_table): Update to use
1013 BFD_RELOC_AARCH64_TLSDESC_ADR_PAGE21 instead of
1014 BFD_RELOC_AARCH64_TLSDESC_ADR_PAGE.
1015 (md_apply_fix): Likewise.
1016 (aarch64_force_relocation): Likewise.
1018 2013-05-28 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
1020 * config/tc-arm.c (it_fsm_post_encode): Improve
1021 warning messages about deprecated IT block formats.
1023 2013-05-28 Marcus Shawcroft <marcus.shawcroft@arm.com>
1025 * config/tc-aarch64.c (md_apply_fix): Move value range checking
1026 inside fx_done condition.
1028 2013-05-22 Jürgen Urban <JuergenUrban@gmx.de>
1030 * config/tc-mips.c (macro): Handle M_LQC2_AB and M_SQC2_AB.
1032 2013-05-20 Peter Bergner <bergner@vnet.ibm.com>
1034 * config/tc-ppc.c (ppc_setup_opcodes): Use new_seg to fix error
1035 and clean up warning when using PRINT_OPCODE_TABLE.
1037 2013-05-20 Alan Modra <amodra@gmail.com>
1039 * config/tc-ppc.c (md_apply_fix): Hoist code common to insn
1040 and data fixups performing shift/high adjust/sign extension on
1041 fieldval. Sink fx_pcrel handling and checks. Use fixP->fx_size
1042 when writing data fixups rather than recalculating size.
1044 2013-05-16 Jan-Benedict Glaw <jbglaw@lug-owl.de>
1046 * doc/c-msp430.texi: Fix typo.
1048 2013-05-16 Tristan Gingold <gingold@adacore.com>
1050 * config/tc-ppc.c (ppc_is_toc_sym): Symbols of class XMC_TC
1051 are also TOC symbols.
1053 2013-05-16 Nick Clifton <nickc@redhat.com>
1055 * config/tc-msp430.c: Make -mmcu recognise more part numbers.
1056 Add -mcpu command to specify core type.
1057 * doc/c-msp430.texi: Update documentation.
1059 2013-05-09 Andrew Pinski <apinski@cavium.com>
1061 * config/tc-mips.c (struct mips_set_options): New ase_virt field.
1062 (mips_opts): Update for the new field.
1063 (file_ase_virt): New variable.
1064 (ISA_SUPPORTS_VIRT_ASE): New macro.
1065 (ISA_SUPPORTS_VIRT64_ASE): New macro.
1066 (MIPS_CPU_ASE_VIRT): New define.
1067 (is_opcode_valid): Handle ase_virt.
1068 (macro_build): Handle "+J".
1069 (validate_mips_insn): Likewise.
1070 (mips_ip): Likewise.
1071 (enum options): Add OPTION_VIRT and OPTION_NO_VIRT.
1072 (md_longopts): Add mvirt and mnovirt
1073 (md_parse_option): Handle OPTION_VIRT and OPTION_NO_VIRT.
1074 (mips_after_parse_args): Handle ase_virt field.
1075 (s_mipsset): Handle "virt" and "novirt".
1076 (mips_elf_final_processing): Add a comment about virt ASE might need
1078 (md_show_usage): Print out the usage of -mvirt and mno-virt options.
1079 * doc/c-mips.texi: Document -mvirt and -mno-virt.
1080 Document ".set virt" and ".set novirt".
1082 2013-05-09 Alan Modra <amodra@gmail.com>
1084 * config/tc-ppc.c (md_apply_fix): Sign extend fieldval under
1085 control of operand flag bits.
1087 2013-05-07 Alan Modra <amodra@gmail.com>
1089 * config/tc-ppc.c (PPC_VLE_SPLIT16A): Delete unused macro.
1090 (PPC_VLE_SPLIT16D, PPC_VLE_LO16A, PPC_VLE_LO16D): Likewise.
1091 (PPC_VLE_HI16A, PPC_VLE_HI16D): Likewise.
1092 (PPC_VLE_HA16A, PPC_VLE_HA16D): Likewise.
1093 (md_apply_fix): Set fx_no_overflow for assorted relocations.
1094 Shift and sign-extend fieldval for use by some VLE reloc
1095 operand->insert functions.
1097 2013-05-06 Paul Brook <paul@codesourcery.com>
1098 Catherine Moore <clm@codesourcery.com>
1100 * config/tc-mips.c (md_pcrel_from): Handle BFD_RELOC_32_PCREL.
1101 (limited_pcrel_reloc_p): Likewise.
1102 (md_apply_fix): Likewise.
1103 (tc_gen_reloc): Likewise.
1105 2013-05-06 Richard Sandiford <rdsandiford@googlemail.com>
1107 * config/tc-mips.c (limited_pcrel_reloc_p): New function.
1108 (mips_fix_adjustable): Adjust pc-relative check to use
1111 2013-05-02 Richard Sandiford <rdsandiford@googlemail.com>
1113 * config/tc-mips.c (mips_pseudo_table): Add stabd and stabs entries.
1114 (s_mips_stab): Do not restrict to stabn only.
1116 2013-05-02 Nick Clifton <nickc@redhat.com>
1118 * config/tc-msp430.c: Add support for the MSP430X architecture.
1119 Add code to insert a NOP instruction after any instruction that
1120 might change the interrupt state.
1121 Add support for the LARGE memory model.
1122 Add code to initialise the .MSP430.attributes section.
1123 * config/tc-msp430.h: Add support for the MSP430X architecture.
1124 * doc/c-msp430.texi: Document the new -mL and -mN command line
1126 * NEWS: Mention support for the MSP430X architecture.
1128 2013-05-01 Maciej W. Rozycki <macro@codesourcery.com>
1130 * configure.tgt: Replace alpha*-*-linuxecoff* pattern with
1131 alpha*-*-linux*ecoff*.
1133 2013-04-30 Chao-ying Fu <Chao-ying.Fu@imgtec.com>
1135 * config/tc-mips.c (mips_ip): Add sizelo.
1136 For "+C", "+G", and "+H", set sizelo and compare against it.
1138 2013-04-29 Nick Clifton <nickc@redhat.com>
1140 * as.c (Options): Add -gdwarf-sections.
1141 (parse_args): Likewise.
1142 * as.h (flag_dwarf_sections): Declare.
1143 * dwarf2dbg.c (emit_fixed_inc_line_addr): Skip section changes.
1144 (process_entries): When -gdwarf-sections is enabled generate
1145 fragmentary .debug_line sections.
1146 (out_debug_line): Set the section for the .debug_line section end
1148 * doc/as.texinfo: Document -gdwarf-sections.
1149 * NEWS: Mention -gdwarf-sections.
1151 2013-04-26 Christian Groessler <chris@groessler.org>
1153 * config/tc-z8k.c (md_parse_option): Set z8k_target_from_cmdline
1154 according to the target parameter. Don't call s_segm since s_segm
1155 calls bfd_set_arch_mach using stdoutput, but stdoutput isn't
1157 (md_begin): Call s_segm according to target parameter from command
1160 2013-04-25 Alan Modra <amodra@gmail.com>
1162 * configure.in: Allow little-endian linux.
1163 * configure: Regenerate.
1165 2013-04-24 Sandra Loosemore <sandra@codesourcery.com>
1167 * config/tc-nios2.c (nios2_control_register_arg_p): Rename
1168 "fstatus" control register to "eccinj".
1170 2013-04-19 Kai Tietz <ktietz@redhat.com>
1172 * configure.tgt (i386-*-cygwin): Handle x86_64 cygwin.
1174 2013-04-15 Julian Brown <julian@codesourcery.com>
1176 * expr.c (add_to_result, subtract_from_result): Make global.
1177 * expr.h (add_to_result, subtract_from_result): Add prototypes.
1178 * config/tc-sh.c (sh_optimize_expr): Use add_to_result,
1179 subtract_from_result to handle extra bit of precision for .sleb128
1182 2013-04-10 Julian Brown <julian@codesourcery.com>
1184 * read.c (convert_to_bignum): Add sign parameter. Use it
1185 instead of X_unsigned to determine sign of resulting bignum.
1186 (emit_expr): Pass extra argument to convert_to_bignum.
1187 (emit_leb128_expr): Use X_extrabit instead of X_unsigned. Pass
1188 X_extrabit to convert_to_bignum.
1189 (parse_bitfield_cons): Set X_extrabit.
1190 * expr.c (make_expr_symbol, expr_build_uconstant, operand):
1191 Initialise X_extrabit field as appropriate.
1192 (add_to_result): New.
1193 (subtract_from_result): New.
1195 * expr.h (expressionS): Add X_extrabit field.
1197 2013-04-10 Jan Beulich <jbeulich@suse.com>
1199 * gas/config/tc-arm.c (encode_arm_addr_mode_3): Only reject base
1200 register being PC when is_t or writeback, and use distinct
1201 diagnostic for the latter case.
1203 2013-04-10 Jan Beulich <jbeulich@suse.com>
1205 * gas/config/tc-arm.c (parse_operands): Re-write
1206 po_barrier_or_imm().
1207 (do_barrier): Remove bogus constraint().
1208 (do_t_barrier): Remove.
1210 2013-04-09 Joerg Wunsch <joerg.wunsch@atmel.com>
1212 * gas/config/tc-avr.c (mcu_types): Add ATmega64RFR2,
1213 ATmega644RFR2, ATmega128RFR2, ATmega1284RFR2, ATmega256RFR2,
1215 * gas/doc/c-avr.texi (-mmcu documentation): Likewise.
1217 2013-04-09 Jan Beulich <jbeulich@suse.com>
1219 * gas/config/tc-arm.c (do_vmrs): Accept all control registers.
1220 Use local variable Rt in more places.
1221 (do_vmsr): Accept all control registers.
1223 2013-04-09 Jan Beulich <jbeulich@suse.com>
1225 * gas/config/tc-arm.c (do_neon_mov): Fake an instruction suffix
1226 if there was none specified for moves between scalar and core
1229 2013-04-09 Jan Beulich <jbeulich@suse.com>
1231 * gas/config/tc-arm.c (do_neon_ldx_stx): Reject VSTn in the
1232 NEON_ALL_LANES case.
1234 2013-04-08 Jan Beulich <jbeulich@suse.com>
1236 * gas/config/tc-arm.c (do_neon_ldr_str): Correct disgnostics for
1239 2013-04-08 Jan Beulich <jbeulich@suse.com>
1241 * gas/config/tc-arm.c (reg_names): Convert duplicate SP_fiq
1244 2013-04-03 Alan Modra <amodra@gmail.com>
1246 * doc/as.texinfo: Add support to generate man options for h8300.
1247 * doc/c-h8300.texi: Likewise.
1249 2013-03-28 Ramana Radhakrishnan <ramana.radhakrishnan@arm.com>
1251 * config/tc-arm.c (arm_cpus): Add support for Cortex-A53 and
1254 2013-03-27 Alexis Deruelle <alexis.deruelle@gmail.com>
1257 * config/tc-tic6x.c (tic6x_try_encode): Add use of bitfields array.
1259 2013-03-26 Nick Clifton <nickc@redhat.com>
1262 * listing.c (rebuffer_line): Rewrite to avoid seeking back to the
1263 start of the file each time.
1266 * config/tc-sparc.h (ELF_TARGET_FORMAT): Set to elf32-sparc for
1269 2013-03-26 Douglas B Rupp <rupp@gnat.com>
1271 * config/tc-ia64.c (emit_one_bundle): Move last_slot adjustment
1274 2013-03-21 Will Newton <will.newton@linaro.org>
1276 * config/tc-arm.c (encode_thumb32_addr_mode): Emit an error for all
1277 pc-relative str instructions in Thumb mode.
1279 2013-03-21 Michael Schewe <michael.schewe@gmx.net>
1281 * config/tc-h8300.c (do_a_fix_imm): Add relaxation of mov
1282 @(disp:32,ERx) to mov @(disp:16,ERx) insns by new reloc
1284 * config/tc-h8300.h: Remove duplicated defines.
1286 2013-03-21 Senthil Kumar Selvaraj <senthil_kumar.selvaraj@atmel.com>
1289 * tc-avr.c (mcu_has_3_byte_pc): New function.
1290 (tc_cfi_frame_initial_instructions): Call it to find return
1293 2013-03-20 Alexis Deruelle <alexis.deruelle@gmail.com>
1296 * config/tc-tic6x.c (tic6x_try_encode): Handle
1297 tic6x_coding_dreg_(msb|lsb) field coding types and use it to
1298 encode register pair numbers when required.
1300 2013-03-15 Will Newton <will.newton@linaro.org>
1302 * config/tc-arm.c (do_neon_ldr_str): Fix error check for PC register
1303 in vstr in Thumb mode for pre-ARMv7 cores.
1305 2013-03-14 Andreas Schwab <schwab@suse.de>
1307 * doc/c-arc.texi (ARC Directives): Revert last change and use
1308 @itemize instead of @table.
1309 * doc/c-arm.texi (ARM-Instruction-Set): Likewise.
1311 2013-03-14 Nick Clifton <nickc@redhat.com>
1314 * config/tc-arm.c (do_co_reg): Do not call check_obsolete with a
1315 NULL message, instead just check ARM_CPU_IS_ANY directly.
1317 2013-03-14 Nick Clifton <nickc@redhat.com>
1320 * doc/c-arc.texi (ARC Directives): Use @code instead of @bullet
1322 * doc/c-arm.texi (ARM-Instruction-Set): Likewise. Also add text
1323 to the @item directives.
1324 (ARM-Neon-Alignment): Move to correct place in the document.
1325 * doc/c-cr16.texi (CR16 Operand Qualifiers): Fix up table
1327 * doc/c-tic54x.texi (TIC54X-Subsyms): Correct use of
1330 2013-03-12 Sebastian Huber <sebastian.huber@embedded-brains.de>
1332 * config/tc-nios2.c (nios2_consume_arg): Delete 'k' case. Add 'o'
1333 case. Add default BAD_CASE to switch.
1335 2013-03-11 Sebastian Huber <sebastian.huber@embedded-brains.de>
1337 * config/tc-nios2.c (nios2_assemble_args_ds): New function.
1338 (nios2_arg_info_structs): Add "d,s" and "d,s,E" entries.
1340 2013-03-11 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
1342 * config/tc-arm.c (crc_ext_armv8): New feature set.
1343 (UNPRED_REG): New macro.
1344 (do_crc32_1): New function.
1345 (do_crc32b, do_crc32h, do_crc32w, do_crc32cb,
1346 do_crc32ch, do_crc32cw): Likewise.
1348 (insns): Add entries for crc32 mnemonics.
1349 (arm_extensions): Add entry for crc.
1351 2013-03-08 Chung-Lin Tang <cltang@codesourcery.com>
1353 * write.h (struct fix): Add fx_dot_frag field.
1354 (dot_frag): Declare.
1355 * write.c (dot_frag): New variable.
1356 (fix_new_internal): Set fx_dot_frag field with dot_frag.
1357 (fixup_segment): Base calculation of fx_offset with fx_dot_frag.
1358 * expr.c (expr): Save value of frag_now in dot_frag when setting
1360 * read.c (emit_expr): Likewise. Delete comments.
1362 2013-03-07 H.J. Lu <hongjiu.lu@intel.com>
1364 * config/tc-i386.c (flag_code_names): Removed.
1365 (i386_index_check): Rewrote.
1367 2013-03-05 Yufeng Zhang <yufeng.zhang@arm.com>
1369 * config/tc-aarch64.c (aarch64_imm_float_p): Rename 'e' to 'pattern';
1371 (aarch64_double_precision_fmovable): New function.
1372 (parse_aarch64_imm_float): Add parameter 'dp_p'; call the new
1373 function; handle hexadecimal representation of IEEE754 encoding.
1374 (parse_operands): Update the call to parse_aarch64_imm_float.
1376 2013-02-28 H.J. Lu <hongjiu.lu@intel.com>
1378 * config/tc-i386.c (_i386_insn): Replace have_hle with hle_prefix.
1379 (check_hle): Updated.
1380 (md_assemble): Likewise.
1381 (parse_insn): Likewise.
1383 2013-02-28 H.J. Lu <hongjiu.lu@intel.com>
1385 * config/tc-i386.c (_i386_insn): Add rep_prefix.
1386 (md_assemble): Check if REP prefix is OK.
1387 (parse_insn): Remove expecting_string_instruction. Set
1390 2013-02-28 Yufeng Zhang <yufeng.zhang@arm.com>
1392 * config/tc-aarch64.c (aarch64_features): Add the 'crc' option.
1394 2013-02-28 Yufeng Zhang <yufeng.zhang@arm.com>
1396 * config/tc-aarch64.c (parse_sys_reg): Allow the full range of CRn
1397 for system registers.
1399 2013-02-27 DJ Delorie <dj@redhat.com>
1401 * config/tc-rl78.c (reloc_function): Add %code -> BFD_RELOC_RL78_CODE.
1402 (rl78_op): Handle %code().
1403 (rl78_cons_fix_new): Likewise, but ignore for 20-bit operands.
1404 (tc_gen_reloc): Likwise; convert to a computed reloc.
1405 (md_apply_fix): Likewise.
1407 2013-02-25 Kaushik Phatak <Kaushik.Phatak@kpitcummins.com>
1409 * config/rl78-parse.y: Fix encoding of DIVWU insn.
1411 2013-02-25 Terry Guo <terry.guo@arm.com>
1413 * config/tc-arm.c (arm_cpus): Add cortex-r7 entry.
1414 * doc/c-arm.texi: Add cortex-r7 and missing cortex-r5 to
1415 list of accepted CPUs.
1417 2013-02-19 H.J. Lu <hongjiu.lu@intel.com>
1420 * config/tc-i386.c (cpu_arch): Add ".smap".
1422 * doc/c-i386.texi: Document smap.
1424 2013-02-18 Maciej W. Rozycki <macro@codesourcery.com>
1426 * config/tc-mips.c (s_cpload): Call mips_mark_labels and set
1427 mips_assembling_insn appropriately.
1428 (s_cpsetup, s_cprestore, s_cpreturn, s_cpadd): Likewise.
1430 2013-02-18 Maciej W. Rozycki <macro@codesourcery.com>
1432 * config/tc-mips.c (append_insn): Correct indentation, remove
1435 2013-02-15 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
1437 * config/tc-arm.c (do_neon_mov): Break on NS_NULL.
1439 2013-02-15 Sebastian Huber <sebastian.huber@embedded-brains.de>
1441 * configure.tgt: Add nios2-*-rtems*.
1443 2013-02-14 Yufeng Zhang <yufeng.zhang@arm.com>
1445 * config/tc-aarch64.c (md_begin): Change to check if 'name' is
1448 2013-02-09 Jürgen Urban <JuergenUrban@gmx.de>
1450 * config/tc-mips.c (CPU_HAS_LDC1_SDC1): New macro.
1451 (macro): Use it. Assert that trunc.w.s is not used for r5900.
1453 2013-02-08 Yi-Hsiu, Hsu <ahsu@marvell.com>
1455 * gas/config/tc-arm.c (arm_cpus): Add support for mcpu=marvell-pj4
1458 2013-02-06 Sandra Loosemore <sandra@codesourcery.com>
1459 Andrew Jenner <andrew@codesourcery.com>
1461 Based on patches from Altera Corporation.
1463 * Makefile.am (TARGET_CPU_CFILES): Add config/tc-nios2.c.
1464 (TARGET_CPU_HFILES): Add config/tc-nios2.h.
1465 * Makefile.in: Regenerated.
1466 * configure.tgt: Add case for nios2*-linux*.
1467 * config/obj-elf.c: Conditionally include elf/nios2.h.
1468 * config/tc-nios2.c: New file.
1469 * config/tc-nios2.h: New file.
1470 * doc/Makefile.am (CPU_DOCS): Add c-nios2.texi.
1471 * doc/Makefile.in: Regenerated.
1472 * doc/all.texi: Set NIOSII.
1473 * doc/as.texinfo (Overview): Add Nios II options.
1474 (Machine Dependencies): Include c-nios2.texi.
1475 * doc/c-nios2.texi: New file.
1476 * NEWS: Note Altera Nios II support.
1478 2013-02-06 Alan Modra <amodra@gmail.com>
1481 * config/tc-avr.h (TC_VALIDATE_FIX): Mark symbol used by reloc.
1482 Don't skip fixups with fx_subsy non-NULL.
1483 * config/tc-avr.c (tc_gen_reloc): Don't specially handle fixups
1484 with fx_subsy non-NULL.
1486 2013-02-04 H.J. Lu <hongjiu.lu@intel.com>
1488 * doc/c-metag.texi: Add "@c man" markers.
1490 2013-02-04 Alan Modra <amodra@gmail.com>
1492 * write.c (fixup_segment): Return void. Delete seg_reloc_count
1494 (TC_ADJUST_RELOC_COUNT): Delete.
1495 * config/tc-i960.h (TC_ADJUST_RELOC_COUNT): Delete.
1497 2013-02-04 Alan Modra <amodra@gmail.com>
1499 * po/POTFILES.in: Regenerate.
1501 2013-01-30 Markos Chandras <markos.chandras@imgtec.com>
1503 * config/tc-metag.c: Make SWAP instruction less permissive with
1506 2013-01-29 DJ Delorie <dj@redhat.com>
1508 * config/tc-rl78.c (rl78_cons_fix_new): Handle user-specified
1509 relocs in .word/.etc statements.
1511 2013-01-29 Roland McGrath <mcgrathr@google.com>
1513 * config/tc-arm.c (md_apply_fix): Use as_bad_where for "bad
1514 immediate value for 8-bit offset" error so it shows line info.
1516 2013-01-24 Joseph Myers <joseph@codesourcery.com>
1518 * config/tc-ppc.c (md_assemble): Do not generate APUinfo sections
1521 2013-01-24 Nick Clifton <nickc@redhat.com>
1523 * config/tc-v850.c: Add support for e3v5 architecture.
1524 * doc/c-v850.texi: Mention new support.
1526 2013-01-23 Nick Clifton <nickc@redhat.com>
1529 * config/tc-avr.c: Include dwarf2dbg.h.
1531 2013-01-18 H.J. Lu <hongjiu.lu@intel.com>
1533 * config/tc-i386.c (reloc): Support size relocation only for ELF.
1534 (tc_i386_fix_adjustable): Likewise.
1535 (lex_got): Likewise.
1536 (tc_gen_reloc): Likewise.
1538 2013-01-17 Yufeng Zhang <yufeng.zhang@arm.com>
1540 * config/tc-aarch64.c (output_operand_error_record): Change to output
1541 the out-of-range error message as value-expected message if there is
1542 only one single value in the expected range.
1543 (programmer_friendly_fixup): Remove the handling of 8-bit MOVI with
1544 LSL #0 as a programmer-friendly feature.
1546 2013-01-16 H.J. Lu <hongjiu.lu@intel.com>
1548 * config/tc-i386.c (reloc): Support BFD_RELOC_SIZE32.
1549 (tc_i386_fix_adjustable): Keep symbol for BFD_RELOC_32_SIZE and
1550 BFD_RELOC_64_SIZE relocations.
1551 (lex_got): Support "symbol@SIZE" and don't create GOT symbol
1553 (tc_gen_reloc): Resolve BFD_RELOC_SIZE32 and BFD_RELOC_SIZE64
1554 relocations against local symbols.
1556 2013-01-16 Alan Modra <amodra@gmail.com>
1558 * config/tc-ppc.c (md_assemble <TE_PE>): Ignore line after
1559 finding some sort of toc syntax error, and break to avoid
1560 compiler uninit warning.
1562 2013-01-15 H.J. Lu <hongjiu.lu@intel.com>
1565 * config/tc-i386.c (lex_got): Increment length by 1 if the
1566 relocation token is removed.
1568 2013-01-15 Nick Clifton <nickc@redhat.com>
1570 * config/tc-v850.c (md_assemble): Allow signed values for
1573 2013-01-11 Sean Keys <skeys@ipdatasys.com>
1575 * config/tc-xgate.c (md_begin): Fix mistake made when going from
1578 2013-01-10 Peter Bergner <bergner@vnet.ibm.com>
1580 * doc/as.texinfo (Target PowerPC): Document -mpower8 and -mhtm.
1581 * doc/c-ppc.texi (PowerPC-Opts): Likewise.
1582 * config/tc-ppc.c (md_show_usage): Likewise.
1583 (ppc_handle_align): Handle power8's group ending nop.
1585 2013-01-10 Sean Keys <skeys@ipdatasys.com>
1587 * config/tc-xgate.c (md_begin): Fix the printing of opcodes so
1588 that the assember exits after the opcodes have been printed.
1590 2013-01-10 H.J. Lu <hongjiu.lu@intel.com>
1592 * app.c: Remove trailing white spaces.
1596 * dw2gencfi.c: Likewise.
1597 * dwarf2dbg.h: Likewise.
1598 * ecoff.c: Likewise.
1599 * input-file.c: Likewise.
1600 * itbl-lex.h: Likewise.
1601 * output-file.c: Likewise.
1604 * subsegs.c: Likewise.
1605 * symbols.c: Likewise.
1606 * write.c: Likewise.
1607 * config/tc-i386.c: Likewise.
1608 * doc/Makefile.am: Likewise.
1609 * doc/Makefile.in: Likewise.
1610 * doc/c-aarch64.texi: Likewise.
1611 * doc/c-alpha.texi: Likewise.
1612 * doc/c-arc.texi: Likewise.
1613 * doc/c-arm.texi: Likewise.
1614 * doc/c-avr.texi: Likewise.
1615 * doc/c-bfin.texi: Likewise.
1616 * doc/c-cr16.texi: Likewise.
1617 * doc/c-d10v.texi: Likewise.
1618 * doc/c-d30v.texi: Likewise.
1619 * doc/c-h8300.texi: Likewise.
1620 * doc/c-hppa.texi: Likewise.
1621 * doc/c-i370.texi: Likewise.
1622 * doc/c-i386.texi: Likewise.
1623 * doc/c-i860.texi: Likewise.
1624 * doc/c-m32c.texi: Likewise.
1625 * doc/c-m32r.texi: Likewise.
1626 * doc/c-m68hc11.texi: Likewise.
1627 * doc/c-m68k.texi: Likewise.
1628 * doc/c-microblaze.texi: Likewise.
1629 * doc/c-mips.texi: Likewise.
1630 * doc/c-msp430.texi: Likewise.
1631 * doc/c-mt.texi: Likewise.
1632 * doc/c-s390.texi: Likewise.
1633 * doc/c-score.texi: Likewise.
1634 * doc/c-sh.texi: Likewise.
1635 * doc/c-sh64.texi: Likewise.
1636 * doc/c-tic54x.texi: Likewise.
1637 * doc/c-tic6x.texi: Likewise.
1638 * doc/c-v850.texi: Likewise.
1639 * doc/c-xc16x.texi: Likewise.
1640 * doc/c-xgate.texi: Likewise.
1641 * doc/c-xtensa.texi: Likewise.
1642 * doc/c-z80.texi: Likewise.
1643 * doc/internals.texi: Likewise.
1645 2013-01-10 Roland McGrath <mcgrathr@google.com>
1647 * hash.c (hash_new_sized): Make it global.
1648 * hash.h: Declare it.
1649 * macro.c (define_macro): Use hash_new_sized instead of hash_new,
1652 2013-01-10 Will Newton <will.newton@imgtec.com>
1654 * Makefile.am: Add Meta.
1655 * Makefile.in: Regenerate.
1656 * config/tc-metag.c: New file.
1657 * config/tc-metag.h: New file.
1658 * configure.tgt: Add Meta.
1659 * doc/Makefile.am: Add Meta.
1660 * doc/Makefile.in: Regenerate.
1661 * doc/all.texi: Add Meta.
1662 * doc/as.texiinfo: Document Meta options.
1663 * doc/c-metag.texi: New file.
1665 2013-01-09 Steve Ellcey <sellcey@mips.com>
1667 * config/tc-i386.c (md_begin): Remove 'internal Error' from as_fatal
1669 * config/tc-mips.c (internalError): Remove, replace with abort.
1671 2013-01-08 Yufeng Zhang <yufeng.zhang@arm.com>
1673 * config/tc-aarch64.c (parse_operands): Change to compare the result
1674 of function call 'parse_sys_reg' with 'PARSE_FAIL' instead of 'FALSE'.
1676 2013-01-07 Nick Clifton <nickc@redhat.com>
1679 * config/tc-arm.c (skip_past_char): Skip whitespace before the
1680 anticipated character.
1681 * config/tc-arm.c (parse_address_main): Delete skip of whitespace
1682 here as it is no longer needed.
1684 2013-01-06 Andreas Schwab <schwab@linux-m68k.org>
1686 * doc/c-mips.texi (MIPS Opts): Fix use of @itemx.
1687 * doc/c-score.texi (SCORE-Opts): Likewise.
1688 * doc/c-tic54x.texi (TIC54X-Directives): Likewise.
1690 2013-01-04 Juergen Urban <JuergenUrban@gmx.de>
1692 * config/tc-mips.c: Add support for MIPS r5900.
1693 Add M_LQ_AB and M_SQ_AB to support large values for instructions
1695 (can_swap_branch_p, get_append_method): Detect some conditional
1696 short loops to fix a bug on the r5900 by NOP in the branch delay
1698 (M_MUL): Support 3 operands in multu on r5900.
1699 (M_TRUNCWS): Support trunc.w.s on r5900 in MIPS ISA I.
1700 (s_mipsset): Force 32 bit floating point on r5900.
1701 (mips_ip): Check parameter range of instructions mfps and mtps on
1703 * configure.in: Detect CPU type when target string contains r5900
1704 (e.g. mips64r5900el-linux-gnu).
1706 2013-01-02 H.J. Lu <hongjiu.lu@intel.com>
1708 * as.c (parse_args): Update copyright year to 2013.
1710 2013-01-02 Yufeng Zhang <yufeng.zhang@arm.com>
1712 * config/tc-aarch64.c (aarch64_cpus): Add entries for "cortex-a53"
1715 2013-01-02 Nick Clifton <nickc@redhat.com>
1718 * config/tc-arm.c (parse_address_main): Skip whitespace before a
1721 For older changes see ChangeLog-2012
1723 Copyright (C) 2013 Free Software Foundation, Inc.
1725 Copying and distribution of this file, with or without modification,
1726 are permitted in any medium without royalty provided the copyright
1727 notice and this notice are preserved.
1733 version-control: never