1 2011-12-19 Iain Sandoe <idsandoe@googlemail.com>
3 * config/obj-macho.c (obj_mach_o_section): Account for target-
4 dependent section types. Improve error handling when wrong section
5 types/attributes are specified.
7 2011-12-19 Chung-Lin Tang <cltang@codesourcery.com>
9 * config/tc-mips.c (mips_pseudo_table): Add tprelword/tpreldword
11 (mips16_percent_op): Add MIPS16 TLS relocation ops.
12 (md_apply_fix): Add BFD_RELOC_MIPS16_TLS_* switch cases.
13 (s_tls_rel_directive): Rename from s_dtprel_internal(). Abstract out
14 directive string and reloc type as function parameters. Update
16 (s_dtprelword,s_dtpreldword): Change to use s_tls_rel_directive().
17 (s_tprelword,s_tpreldword): New functions.
19 2011-12-15 Tristan Gingold <gingold@adacore.com>
21 * config/obj-macho.c (obj_mach_o_fileprop): Fix typo.
23 2011-12-15 Konstantin Belousov <kib@FreeBSD.org>
25 * config/obj-elf.c (obj_elf_type): Add ELFOSABI_FREEBSD to the
28 2011-12-15 Iain Sandoe <iains@gcc.gnu.org>
30 * config/obj-macho.c (obj_mach_o_subsections_by_symbols): New global.
31 (obj_mach_o_file_properties): New enum.
32 (obj_mach_o_subsections_via_symbols): Generalize name to...
33 ... (obj_mach_o_fileprop) and use to set subsections_via_symbols.
35 2011-12-14 Stuart Henderson <shenders@gcc.gnu.org>
37 * config/bfin-parse.y (asm_1): set SRCx fields to all 1s for
38 dspalu32 instrs that don't use them.
40 2011-12-14 Nick Clifton <nickc@redhat.com>
42 * config/tc-cris.c (md_convert_frag): Mark the length_code local
43 variable as unused as it is only used when ENABLE_CHECKING is on.
45 2011-12-14 Iain Sandoe <iains@gcc.gnu.org>
47 * config/obj-macho.c: Add some more top-level comments.
48 (collect_16char_name): New.
49 (obj_mach_o_section): Amend to allow syntax compatible with
50 existing system tools. Use section translation data when available.
51 (obj_mach_o_segT_from_bfd_name): New.
52 (known_sections): Update.
53 (obj_mach_o_known_section): Use obj_mach_o_segT_from_bfd_name.
55 (obj_mach_o_objc_section): New.
56 (debug_sections): New.
57 (obj_mach_o_debug_section): New.
59 (obj_mach_o_opt_tgt_section): New.
60 (obj_mach_o_base_section): New.
61 (obj_mach_o_common_parse): Update to create BSS on demand and to handle
62 lcomm optional alignment param.
63 (obj_mach_o_comm): Update parameter name.
64 (obj_mach_o_placeholder): New.
65 (mach_o_pseudo_table): Update for GCC section directives.
66 * config/obj-macho.h (_OBJ_MACH_O_H): New.
67 (USE_ALIGN_PTWO): Define.
70 2011-12-13 Andrew Burgess <aburgess@broadcom.com>
72 * doc/internals.texi (TC_FORCE_RELOCATION_SUB_SAME): Update
75 2011-12-08 Andrew Pinski <apinski@cavium.com>
76 Adam Nemet <anemet@caviumnetworks.com>
78 * tc-mips.c (CPU_IS_OCTEON): Add Octeon2.
79 (mips_cpu_info_table): Add Octeon2.
80 * doc/c-mips.texi: Document octeon2 as an acceptable value for -march=.
82 2011-12-07 Sameera Deshpande <sameera.deshpande@arm.com>
84 * config/tc-arm.c (do_t_ldstd): Warn for unpredictable cases.
86 2011-11-07 Matthew Gretton-Dann <matthew.gretton-dann@arm.com>
88 * config/tc-arm.c (ARM_IT_MAX_OPERANDS): New define.
89 (arm_it): Use ARM_IT_MAX_OPERANDS.
90 (neon_select_shape): Ensure we have matched all operands.
92 2011-11-07 Matthew Gretton-Dann <matthew.gretton-dann@arm.com>
94 * config/tc-arm.c (parse_neon_mov): Update which_operand
97 2011-12-05 Richard Earnshaw <rearnsha@arm.com>
99 * tc-arm.c (aeabi_set_public_attributes): Correctly set
100 Tag_ARM_ISA_use and Tag_Thumb_ISA_use.
102 2011-11-30 Matthew Gretton-Dann <matthew.gretton-dann@arm.com>
104 * config/tc-arm.c (arm_cpu_option_table): Add name_len field.
105 (arm_arch_option_table): Likewise.
106 (arm_option_extension_value_table): Likewise.
107 (ARM_CPU_OPT): New define.
108 (ARM_ARCH_OPT): Likewise.
109 (ARM_EXT_OPT): Likewise.
110 (arm_cpus): Use ARM_CPU_OPT to initialize.
111 (arm_archs): Use ARM_ARCH_OPT to initialize.
112 (arm_extensions): Use ARM_EXT_OPT to initialize.
113 (arm_parse_extension): Ensure option string matching matches
115 (arm_parse_cpu): Likewise.
116 (arm_parse_arch): Likewise.
118 2011-11-29 Andrew Pinski <apinski@cavium.com>
120 * config/tc-mips.c (CPU_IS_OCTEON): New macro function.
121 (CPU_HAS_SEQ): Change to use CPU_IS_OCTEON.
122 (NO_ISA_COP): Likewise.
123 (macro) <ld_st>: Add support when off0 is true.
124 Add support for M_SAA_AB, M_SAA_OB, M_SAAD_OB and M_SAAD_AB.
125 (mips_cpu_info_table): Add octeon+.
126 * doc/c-mips.texi: Document octeon+ as an acceptable value for -march=.
128 2011-11-25 Matthew Gretton-Dann <matthew.gretton-dann@arm.com>
130 * config/tc-arm.c (do_t_mov_cmp): Allow MOV lowreg, lowreg when no CPU
133 2011-11-23 Tristan Gingold <gingold@adacore.com>
135 * config/tc-alpha.c (s_alpha_prologue): Requires empty line.
137 2011-11-23 Tristan Gingold <gingold@adacore.com>
139 * config/tc-alpha.c (s_alpha_frame): Emit a warning if bad value
141 (s_alpha_pdesc): Adjust comment.
143 2011-11-23 Thomas Klein <th.r.klein@web.de>
145 * config/tc-arm.c (do_t_mov_cmp): Prevent emitting code for MOV
146 with two low register at arch v4t or v5t when assember using
149 2011-11-21 DJ Delorie <dj@redhat.com>
151 * config/rl78-defs.h (rl78_error): Add "const".
152 * config/rl78-parse.y (rl78_error): Likewise.
154 2011-11-21 Andreas Tobler <andreast@fgznet.ch>
156 * config/tc-ppc.c (ppc_target_format): Add format for powerpc*-freebsd.
158 2011-11-16 David S. Miller <davem@davemloft.net>
160 * config/tc-sparc.c (md_apply_fix): Handle BFD_RELOC_8.
162 2011-11-16 Maciej W. Rozycki <macro@codesourcery.com>
164 * config/tc-mips.c (macro): Fix unsupported opcode message
166 (mips_ip, mips16_ip): Likewise.
168 2011-11-16 Maciej W. Rozycki <macro@codesourcery.com>
170 * config/tc-mips.c (ISA_SUPPORTS_MCU_ASE): Also set if microMIPS
173 2011-11-16 Maciej W. Rozycki <macro@codesourcery.com>
175 * config/tc-mips.c (macro_build_jalr): Reverse a negative
179 2011-11-16 Catherine Moore <clm@codesourcery.com>
180 Maciej W. Rozycki <macro@codesourcery.com>
182 * config/tc-mips.c (mips_cpu_info_table): Add "m14ke" and
184 * doc/c-mips.texi (MIPS architecture options): Add "m14ke" and
185 "m14kec" to the list of -march options.
187 2011-11-15 Maciej W. Rozycki <macro@codesourcery.com>
189 * write.c (dump_section_relocs): Don't convert PC-relative relocs
190 that have an in-place addend narrower than the addresses used.
192 2011-11-14 Maciej W. Rozycki <macro@codesourcery.com>
194 * config/tc-mips.c (can_swap_branch_p): Exclude microMIPS
197 2011-11-07 Matthew Gretton-Dann <matthew.gretton-dann@arm.com>
199 * config/tc-arm.c (arm_cpus): Add cortex-a7 entry.
200 * doc/c-arm.texi (ARM Options): Add cortex-a7 to list of accepted
203 2011-11-04 DJ Delorie <dj@redhat.com>
205 * doc/c-rl78.texi (RL78-Float): Remove unused menu entry.
207 2011-11-02 DJ Delorie <dj@redhat.com>
209 * config/tc-rl78.c (tc_gen_reloc): Remove unused variable.
211 2011-11-02 Nick Clifton <nickc@redhat.com>
213 * config/tc-arm.c (md_begin): Remove ARM_PLT32 reloc associated
214 with the (PLT) instruction suffix when operating in eabi mode.
215 * doc/c-arm.texi (ARM_Relocations): Extend description of (PLT)
218 2011-11-01 DJ Delorie <dj@redhat.com>
220 * Makefile.am (TARGET_CPU_CFILES): Add tc-rl78.c.
221 (TARGET_CPU_HFILES): Add rc-rl78.h.
222 (EXTRA_DIST): Add rl78-parse.c and rl78-parse.y.
223 (rl78-parse.c, rl78-parse.h, rl78-parse.o, rl78-defs.h): New rules.
224 * Makefile.in: Regenerate.
225 * configure.in: Add rl78 case.
226 * configure: Regenerate.
227 * configure.tgt: Add rl78 case.
228 * config/rl78-defs.h: New file.
229 * config/rl78-parse.y: New file.
230 * config/tc-rl78.c: New file.
231 * config/tc-rl78.h: New file.
232 * NEWS: Add Renesas RL78.
234 * doc/Makefile.am (c-rl78.texi): New.
235 * doc/Makefile.in: Likewise.
236 * doc/all.texi: Enable it.
237 * doc/as.texi: Add it.
238 * doc/c-rl78.texi: New file.
240 2011-10-28 Walter Lee <walt@tilera.com>
242 * NEWS: Fix TILEPro capitalization.
243 * config/tc-tilegx.c (emit_tilegx_instruction) Handle
244 relocations of aliases.
245 * config/tc-tilepro.c: (emit_tilepro_instruction) Likewise.
247 2011-10-28 Nick Clifton <nickc@redhat.com>
249 * po/ja.po: New Japanese translation.
250 * configure.in (ALL_LINGUAS): Add ja.
251 * configure: Regenerate.
253 2011-10-26 Joern Rennecke <joern.rennecke@embecosm.com>
255 * doc/as.texinfo [EPIPHANY]: Include c-epiphany.texi to avoid
258 2011-10-25 Mike Frysinger <vapier@gentoo.org>
260 * config/rx-defs.h (rx_error): Add const to first arg.
261 * config/rx-parse.y (rx_error): Likewise.
263 2011-10-25 Nick Clifton <nickc@redhat.com>
265 * config/tc-ns32k.c (md_begin): Rename local variable 'stat' to
268 2011-10-25 Joern Rennecke <joern.rennecke@embecosm.com>
270 * NEWS: Mention addition of Adapteva Epiphany support.
271 * config/tc-epiphany.c: New file.
272 * config/tc-epiphany.h: New file.
273 * Makefile.am (TARGET_CPU_CFILES): Add config/tc-epiphany.c .
274 (TARGET_CPU_HFILES): Add config/tc-epiphany.h .
275 * configure.in: Also set using_cgen for epiphany.
276 * configure.tgt: Handle epiphany.
277 * doc/Makefile.am (CPU_DOCS): Add c-epiphany.texi .
278 * doc/all.texi: Set EPIPHANY.
279 * doc/as.texinfo: Add EPIPHANY-specific text.
280 * doc/c-epiphany.texi: New file.
281 * po/gas.pot: Regenerate.
282 * Makefile.in: Regenerate.
283 * configure: Regenerate.
284 * doc/Makefile.in: Regenerate.
285 * po/POTFILES.in: Regenerate.
287 2011-10-24 Maciej W. Rozycki <macro@codesourcery.com>
289 * config/tc-mips.c (move_register): Fix formatting.
291 2011-10-24 Maciej W. Rozycki <macro@codesourcery.com>
293 * config/tc-mips.c (can_swap_branch_p): Remove empty line.
294 (start_noreorder): Likewise.
296 2011-10-24 Maciej W. Rozycki <macro@codesourcery.com>
298 * config/tc-mips.c (s_option): Fix formatting.
299 (mips_elf_final_processing): Likewise.
301 2011-10-24 Maciej W. Rozycki <macro@codesourcery.com>
303 * config/tc-mips.c (validate_micromips_insn): Fix formatting.
305 2011-10-24 David Binderman <dcb314@hotmail.com>
307 * config/tc-mn10200.c (md_convert_frag): Add missing break.
309 2011-10-21 Tristan Gingold <gingold@adacore.com>
311 * config/tc-alpha.c (load_expression): Use symbol_mark_used accessor.
312 (s_alpha_comm): Use symbol_set_frag accessor.
314 2011-10-20 Alan Modra <amodra@gmail.com>
316 * config/tc-mips.c (micromips_add_label): Avoid gcc warning.
317 (md_convert_frag): Likewise.
319 2011-10-18 Jie Zhang <jie@codesourcery.com>
320 Julian Brown <julian@codesourcery.com>
322 * config/tc-arm.c (parse_shifter_operand): Fix handling of explicit
324 (encode_arm_shifter_operand): Likewise.
326 2011-10-13 James Greenhalgh <james.greenhalgh@arm.com>
328 * config/tc-arm.c (check_ldr_r15_aligned): New.
329 (do_ldst): Warn in upredictable cases.
330 (do_t_ldst): Likewise.
331 (insns): Update accordingly.
333 2011-10-13 Alan Modra <amodra@gmail.com>
335 * as.c (main): Define .gasversion. rather than __GAS_VERSION__.
336 * frags.h (bss_address_frag): Delete
337 (predefined_address_frag): New.
338 * frags.c (frag_init): Init predefined_address_frag. Delete ref
340 * symbols.c (S_CAN_BE_REDEFINED): New function.
341 * symbols.h (S_CAN_BE_REDEFINED): Declare.
342 * read.c (assign_symbol): Use S_CAN_BE_REDEFINED.
344 2011-10-12 Alan Modra <amodra@gmail.com>
346 * symbols.c (local_symbol_make): Make global.
347 * symbols.h (local_symbol_make): Declare.
348 * as.c (main): Define __GAS_VERSION__.
350 2011-10-10 Nick Clifton <nickc@redhat.com>
352 * po/es.po: Updated Spanish translation.
353 * po/fi.po: Updated Finnish translation.
354 * po/fr.po: Updated French translation.
356 2011-10-05 DJ Delorie <dj@redhat.com>
357 Nick Clifton <nickc@redhat.com>
359 * config/rx-defs.h (rx_pid_register): New.
360 (rx_gp_register): New.
361 * config/rx-parse.y (rx_lex): Add support for %gpreg and %pidreg.
362 (displacement): Add PID support.
363 * config/tc-rx.c (rx_pid_mode): New.
364 (rx_num_int_regs): New.
365 (rx_pid_register): New.
366 (rx_gp_register): New.
367 (options): Add -mpid and -mint-register= options.
368 (md_longopts): Likewise.
369 (md_parse_option): Likewise.
370 (md_show_usage): Likewise.
371 (rx_pid_symbol): New.
372 (rx_pidreg_symbol): New.
373 (rx_gpreg_symbol): New.
374 (md_begin): Support PID.
375 (rx_validate_fix_sub): Support PID.
376 (tc_gen_reloc): Support PID.
377 * doc/c-rx.texi: Document PID support.
379 2011-09-27 Kai Tietz <ktietz@redhat.com>
381 * config/obj-coff.c (obj_coff_section): Add 'e' as specifier
382 for marking section SEC_EXCLUDE.
384 2011-09-22 Tristan Gingold <gingold@adacore.com>
386 * NEWS: Add marker for 2.22.
388 2011-09-21 David S. Miller <davem@davemloft.net>
390 * config/tc-sparc.c (hwcap_allowed): New.
391 (struct sparc_arch): New field 'hwcap_allowed' containing a bitmask
392 of F_FOO flags which are enabled by the particular arch setting.
393 Add new options that provide explicit access to new instructions.
394 (md_parse_option): Only bump max_architecture if the requested one
395 is larger, or this is the first explicit request.
396 (get_hwcap_name): New function.
397 (sparc_ip): Validate that hwcaps used by an instruction have actually
399 * doc/c-sparc.texi: Document new sparc options.
401 2011-09-21 David S. Miller <davem@davemloft.net>
403 * config/tc-sparc.c (hwcap_seen): New bitmask, defined when
405 (sparc_ip): When not TE_SOLARIS, accumulate hwcap bits from
406 sparc_opcode->flags of instruction into hwcap_seen.
407 (sparc_md_end): Create Tag_GNU_Sparc_HWCAPS attribute if
408 hwcap_seen is non-zero and not TE_SOLARIS.
410 2011-09-19 Tristan Gingold <gingold@adacore.com>
412 * config/tc-alpha.c (insert_operand): Call as_bad_value_out_of_range
413 instead of as_warn_out_of_range.
415 2011-09-08 Mark Fortescue <mark@mtfhpc.demon.co.uk>
417 * config/tc-sparc.c (sparc_ip): Handle 'i' + r<0..31>
418 in addition to 'i' + [goli]<0..7>.
420 2011-09-08 Joern Rennecke <joern.rennecke@embecosm.com>
422 * cgen.c (gas_cgen_pcrel_r_type): New function.
423 (gas_cgen_tc_gen_reloc): Check for GAS_CGEN_PCREL_R_TYPE.
424 * cgen.h (gas_cgen_pcrel_r_type): Declare.
426 2011-09-08 Richard Sandiford <rdsandiford@googlemail.com>
429 * dwarf2dbg.c (dwarf2_flush_pending_lines): Use symbol_temp_new_now.
431 2011-09-05 Richard Sandiford <rdsandiford@googlemail.com>
434 * dwarf2dbg.c (pending_lines, pending_lines_tail): New variables.
435 (dwarf2_gen_line_info_1): Delete.
436 (dwarf2_push_line, dwarf2_flush_pending_lines): New functions.
437 (dwarf2_gen_line_info, dwarf2_emit_label): Use them.
438 (dwarf2_consume_line_info): Call dwarf2_flush_pending_lines.
439 (dwarf2_directive_loc): Push previous .locs instead of generating
442 2011-08-26 Nick Clifton <nickc@redhat.com>
444 * po/es.po: Updated Spanish translation.
446 2011-08-26 Tristan Gingold <gingold@adacore.com>
448 * config/tc-alpha.c (s_alpha_linkage): Simplify. Add comments.
450 2011-08-26 Tristan Gingold <gingold@adacore.com>
452 * config/tc-alpha.c (add_to_link_pool): Improve comment.
453 (s_alpha_fp_save): Fix indentation.
455 2011-08-19 Nick Clifton <nickc@redhat.com>
457 * doc/as.texinfo: Include c-xstormy16.texi.
459 2011-08-18 Alan Modra <amodra@gmail.com>
461 * write.c (resolve_reloc_expr_symbols): Convert local symbols
462 on relocs to section+offset.
463 (get_frag_for_reloc): New function.
464 (write_relocs): Merge sort fixup relocs with those from .reloc
467 2011-08-10 Maciej W. Rozycki <macro@codesourcery.com>
469 * config/tc-mips.c (can_swap_branch_p): Update the comment on
472 2011-08-09 Chao-ying Fu <fu@mips.com>
473 Daniel Jacobowitz <dan@codesourcery.com>
475 * config/tc-mips.c (mips_cpu_info_table): Add "m14k" and
477 * doc/c-mips.texi (MIPS architecture options): Add "m14k" and
478 "m14kc" to the list of -march options.
480 2011-08-09 Chao-ying Fu <fu@mips.com>
481 Maciej W. Rozycki <macro@codesourcery.com>
483 * config/tc-mips.c (mips_set_options): Add ase_mcu.
484 (mips_opts): Initialise ase_mcu to -1.
485 (ISA_SUPPORTS_MCU_ASE): New macro.
486 (MIPS_CPU_ASE_MCU): Likewise.
487 (is_opcode_valid): Handle MCU.
488 (macro_build, macro): Likewise.
489 (validate_mips_insn, validate_micromips_insn): Likewise.
491 (options): Add OPTION_MCU and OPTION_NO_MCU.
492 (md_longopts): Add mmcu and mno-mcu.
493 (md_parse_option): Handle OPTION_MCU and OPTION_NO_MCU.
494 (mips_after_parse_args): Handle MCU.
495 (s_mipsset): Likewise.
496 (md_show_usage): Handle MCU options.
498 * doc/as.texinfo: Document -mmcu and -mno-mcu options.
499 * doc/c-mips.texi: Likewise, and document ".set mcu" and
500 ".set nomcu" directives.
502 2011-08-09 Maciej W. Rozycki <macro@codesourcery.com>
504 * config/tc-mips.c (gpr_mod_mask): Remove INSN2_MOD_GPR_MB,
505 INSN2_MOD_GPR_MC, INSN2_MOD_GPR_ME, INSN2_MOD_GPR_MG,
506 INSN2_MOD_GPR_MHI, INSN2_MOD_GPR_MJ, INSN2_MOD_GPR_MM,
507 INSN2_MOD_GPR_MN, INSN2_MOD_GPR_MP and INSN2_MOD_GPR_MQ opcode
509 (gpr_read_mask): Add INSN2_READ_GPR_MC, INSN2_READ_GPR_ME
510 INSN2_READ_GPR_MG, INSN2_READ_GPR_MJ, INSN2_READ_GPR_MMN,
511 INSN2_READ_GPR_MP and INSN2_READ_GPR_MQ opcode register use
513 (gpr_write_mask): Replace INSN2_WRITE_GPR_S opcode register
514 use flag with INSN_WRITE_GPR_S. Add INSN2_WRITE_GPR_MB,
515 INSN2_WRITE_GPR_MHI, INSN2_WRITE_GPR_MJ and INSN2_WRITE_GPR_MP
516 opcode register use checks.
517 (can_swap_branch_p): Enable microMIPS branch swapping.
518 (append_insn): Likewise.
520 2011-08-09 Maciej W. Rozycki <macro@codesourcery.com>
522 * config/tc-mips.c (RELAX_MICROMIPS_ENCODE): Remove forced 16-bit
523 branch size information.
524 (RELAX_MICROMIPS_U16BIT): Remove macro.
525 (RELAX_MICROMIPS_UNCOND): Adjust accordingly.
526 (RELAX_MICROMIPS_COMPACT, RELAX_MICROMIPS_LINK): Likewise.
527 (RELAX_MICROMIPS_RELAX32): Likewise.
528 (RELAX_MICROMIPS_TOOFAR16): Likewise.
529 (RELAX_MICROMIPS_MARK_TOOFAR16): Likewise.
530 (RELAX_MICROMIPS_CLEAR_TOOFAR16): Likewise.
531 (RELAX_MICROMIPS_TOOFAR32): Likewise.
532 (RELAX_MICROMIPS_MARK_TOOFAR32): Likewise.
533 (RELAX_MICROMIPS_CLEAR_TOOFAR32): Likewise.
534 (append_insn): Always check forced_insn_length for microMIPS
535 relaxation. Adjust code for the removal of
536 RELAX_MICROMIPS_U16BIT.
537 (mips_ip) <'D', 'E'>: If forced_insn_length, then emit the
538 relocation straight away.
539 (relaxed_micromips_16bit_branch_length): Adjust code for the
540 removal of RELAX_MICROMIPS_U16BIT.
542 2011-08-08 Tristan Gingold <gingold@adacore.com>
544 * config/obj-macho.c (obj_mach_o_section): New function.
545 (struct known_section): New type.
546 (known_sections): Declare.
547 (obj_mach_o_known_section): New function.
548 (obj_mach_o_common_parse): Ditto.
549 (obj_mach_o_comm): Ditto.
550 (obj_mach_o_subsections_via_symbols): Ditto.
551 (mach_o_pseudo_table): Add new pseudos.
553 2011-08-06 Richard Henderson <rth@redhat.com>
555 * dw2gencfi.c (all_fde_data): Export.
556 * dw2gencfi.h (all_fde_data): Declare.
557 * config/tc-alpha.c (alpha_elf_md_end): Don't convert legacy unwind
558 info to cfi unwind info if the user already has supplied some.
560 2011-08-06 Richard Sandiford <rdsandiford@googlemail.com>
562 * config/tc-mips.c (emit_nop): Delete.
563 (get_delay_slot_nop): New function.
564 (nops_for_insn_or_target): Use it.
565 (append_insn): Likewise. When avoiding hazards, call add_fixed_insn
566 and insert_into_history directly.
568 2011-08-06 Richard Sandiford <rdsandiford@googlemail.com>
570 * config/tc-mips.c (delayed_branch_p, compact_branch_p)
571 (uncond_branch_p, branch_likely_p): New functions.
572 (insns_between, nops_for_insn_or_target, append_insn)
573 (macro_start): Use them.
574 (get_append_method): Likewise. Remove redundant test.
576 2011-08-05 David S. Miller <davem@davemloft.net>
578 * config/tc-sparc.c (v9a_asr_table): Add "cps".
579 (sparc_ip): Handle '4', '5' and '(' format codes.
581 2011-08-04 H.J. Lu <hongjiu.lu@intel.com>
584 * output-file.c (output_file_close): Call bfd_cache_close_all
587 * write.c (write_object_file): Revert the last change.
589 2011-08-04 Alan Modra <amodra@gmail.com>
591 * write.c (write_object_file): Call set_symtab even if we had
594 2011-08-04 Tristan Gingold <gingold@adacore.com>
596 * config/obj-elf.c (obj_elf_section): Do not free name.
598 2011-08-03 James Greenhalgh <james.greenhalgh@arm.com>
600 * config/tc-arm.c (do_t_strexbh): New.
601 (insns): Update accordingly.
603 2011-08-01 H.J. Lu <hongjiu.lu@intel.com>
606 * config/tc-i386.c (handle_quad): Removed.
607 (md_pseudo_table): Remove "quad".
608 (tc_gen_reloc): Don't check BFD_RELOC_64 for disallow_64bit_reloc.
609 (x86_dwarf2_addr_size): New.
611 * config/tc-i386.h (x86_dwarf2_addr_size): New.
612 (DWARF2_ADDR_SIZE): Likewise.
614 2011-08-01 Nick Clifton <nickc@redhat.com>
617 * config/tc-arm.c (literal_pool): Add locs field.
618 (add_to_lit_pool): Initialise the locs entry for the new literal.
619 (s_ltorg): Generate a DWARF2 line number entry for each emitted
622 2011-08-01 Tristan Gingold <gingold@adacore.com>
624 * write.c (write_relocs): Fix -Wshadow in DEBUG3 and DEBUG4.
626 2011-08-01 Tristan Gingold <gingold@adacore.com>
628 * frags.c (frag_grow): Simplify the code.
630 2011-07-30 Richard Sandiford <rdsandiford@googlemail.com>
632 * config/tc-mips.c (nops_for_vr4130): Revert previous commit.
634 2011-07-29 Maciej W. Rozycki <macro@codesourcery.com>
636 * config/tc-mips.c: Adjust comments throughout.
637 (reglist_lookup): Reshape code.
638 (jmp_reloc_p, jalr_reloc_p): Reformat.
639 (got16_reloc_p, hi16_reloc_p, lo16_reloc_p): Handle microMIPS
641 (gpr_mod_mask): Remove unused variable.
642 (gpr_read_mask, gpr_write_mask): Reshape code.
643 (fpr_read_mask, fpr_write_mask): Likewise.
644 (nops_for_vr4130): Ensure non-microMIPS mode.
645 (can_swap_branch_p): Correct pinfo2 reference. Reshape code.
646 (append_insn): Skip Loongson 2F workaround in MIPS16 mode. Use
647 the outermost operator of a compound relocation to determines
648 the relocated field. Fix formatting.
649 (md_convert_frag): Reshape code.
651 2011-07-29 Tristan Gingold <gingold@adacore.com>
653 * frags.c (frag_var_init): New function.
654 (frag_var): Call frag_var_init to initialize.
655 (frag_variant): Ditto.
657 2011-07-27 Nathan Sidwell <nathan@codesourcery.com>
659 * dwarf2dbg.c (out_debug_line): Ignore non-normal segments, with a
661 * doc/as.texinfo (Offset): Document .offset directive.
663 2011-07-27 Tristan Gingold <gingold@adacore.com>
665 * frags.c (frag_grow): Revert previous patch.
667 2011-07-26 Kazuhiro Inaoka <kazuhiro.inaoka.ud@renesas.com>
669 * config/tc-rx.c (md_convert_frag): Fix encoding of beq.a
670 synthetic instruction.
672 2011-07-25 Tristan Gingold <gingold@adacore.com>
674 * frags.c (frag_grow): Simplify the code.
676 2011-07-24 Maciej W. Rozycki <macro@codesourcery.com>
677 Chao-ying Fu <fu@mips.com>
678 Richard Sandiford <rdsandiford@googlemail.com>
680 * config/tc-mips.h (mips_segment_info): Add one bit for
682 (TC_LABEL_IS_LOCAL): New macro.
683 (mips_label_is_local): New prototype.
684 * config/tc-mips.c (S0, S7): New macros.
685 (emit_branch_likely_macro): New variable.
686 (mips_set_options): Add micromips.
687 (mips_opts): Initialise micromips to -1.
688 (file_ase_micromips): New variable.
689 (CPU_HAS_MICROMIPS): New macro.
690 (hilo_interlocks): Set for microMIPS too.
691 (gpr_interlocks): Likewise.
692 (cop_interlocks): Likewise.
693 (cop_mem_interlocks): Likewise.
694 (HAVE_CODE_COMPRESSION): New macro.
695 (micromips_op_hash): New variable.
696 (micromips_nop16_insn, micromips_nop32_insn): New variables.
697 (NOP_INSN): Handle microMIPS ASE.
698 (mips32_to_micromips_reg_b_map): New macro.
699 (mips32_to_micromips_reg_c_map): Likewise.
700 (mips32_to_micromips_reg_d_map): Likewise.
701 (mips32_to_micromips_reg_e_map): Likewise.
702 (mips32_to_micromips_reg_f_map): Likewise.
703 (mips32_to_micromips_reg_g_map): Likewise.
704 (mips32_to_micromips_reg_l_map): Likewise.
705 (mips32_to_micromips_reg_n_map): Likewise.
706 (mips32_to_micromips_reg_h_map): New variable.
707 (mips32_to_micromips_reg_m_map): Likewise.
708 (mips32_to_micromips_reg_q_map): Likewise.
709 (micromips_to_32_reg_h_map): New variable.
710 (micromips_to_32_reg_i_map): Likewise.
711 (micromips_to_32_reg_m_map): Likewise.
712 (micromips_to_32_reg_q_map): Likewise.
713 (micromips_to_32_reg_b_map): New macro.
714 (micromips_to_32_reg_c_map): Likewise.
715 (micromips_to_32_reg_d_map): Likewise.
716 (micromips_to_32_reg_e_map): Likewise.
717 (micromips_to_32_reg_f_map): Likewise.
718 (micromips_to_32_reg_g_map): Likewise.
719 (micromips_to_32_reg_l_map): Likewise.
720 (micromips_to_32_reg_n_map): Likewise.
721 (micromips_imm_b_map, micromips_imm_c_map): New macros.
722 (RELAX_DELAY_SLOT_16BIT): New macro.
723 (RELAX_DELAY_SLOT_SIZE_FIRST): Likewise.
724 (RELAX_DELAY_SLOT_SIZE_SECOND): Likewise.
725 (RELAX_MICROMIPS_ENCODE, RELAX_MICROMIPS_P): New macros.
726 (RELAX_MICROMIPS_TYPE, RELAX_MICROMIPS_AT): Likewise.
727 (RELAX_MICROMIPS_U16BIT, RELAX_MICROMIPS_UNCOND): Likewise.
728 (RELAX_MICROMIPS_COMPACT, RELAX_MICROMIPS_LINK): Likewise.
729 (RELAX_MICROMIPS_RELAX32, RELAX_MICROMIPS_TOOFAR16): Likewise.
730 (RELAX_MICROMIPS_MARK_TOOFAR16): Likewise.
731 (RELAX_MICROMIPS_CLEAR_TOOFAR16): Likewise.
732 (RELAX_MICROMIPS_TOOFAR32): Likewise.
733 (RELAX_MICROMIPS_MARK_TOOFAR32): Likewise.
734 (RELAX_MICROMIPS_CLEAR_TOOFAR32): Likewise.
735 (INSERT_OPERAND, EXTRACT_OPERAND): Handle microMIPS ASE.
736 (mips_macro_warning): Add delay_slot_16bit_p, delay_slot_32bit_p,
738 (mips_mark_labels): New function.
739 (mips16_small, mips16_ext): Remove variables, replacing with...
740 (forced_insn_size): ... this.
741 (append_insn, mips16_ip): Update accordingly.
742 (micromips_insn_length): New function.
743 (insn_length): Return the length of microMIPS instructions.
744 (mips_record_mips16_mode): Rename to...
745 (mips_record_compressed_mode): ... this. Handle microMIPS ASE.
746 (install_insn): Handle microMIPS ASE.
747 (reglist_lookup): New function.
748 (is_size_valid, is_delay_slot_valid): Likewise.
749 (md_begin): Handle microMIPS ASE.
750 (md_assemble): Likewise. Update for append_insn interface change.
751 (micromips_reloc_p): New function.
752 (got16_reloc_p): Handle microMIPS ASE.
753 (hi16_reloc_p): Likewise.
754 (lo16_reloc_p): Likewise.
755 (jmp_reloc_p): New function.
756 (jalr_reloc_p): Likewise.
757 (matching_lo_reloc): Handle microMIPS ASE.
758 (insn_uses_reg, reg_needs_delay): Likewise.
759 (mips_move_labels): Likewise.
760 (mips16_mark_labels): Rename to...
761 (mips_compressed_mark_labels): ... this. Handle microMIPS ASE.
762 (gpr_mod_mask): New function.
763 (gpr_read_mask, gpr_write_mask): Handle microMIPS ASE.
764 (fpr_read_mask, fpr_write_mask): Likewise.
765 (insns_between, nops_for_vr4130, nops_for_insn): Likewise.
766 (fix_loongson2f_nop, fix_loongson2f_jump): Likewise.
767 (MICROMIPS_LABEL_CHAR): New macro.
768 (micromips_target_label, micromips_target_name): New variables.
769 (micromips_label_name, micromips_label_expr): New functions.
770 (micromips_label_inc, micromips_add_label): Likewise.
771 (mips_label_is_local): Likewise.
772 (micromips_map_reloc): Likewise.
773 (can_swap_branch_p): Handle microMIPS ASE.
774 (append_insn): Add expansionp argument. Handle microMIPS ASE.
775 (start_noreorder, end_noreorder): Handle microMIPS ASE.
776 (macro_start, macro_warning, macro_end): Likewise.
777 (brk_fmt, cop12_fmt, jalr_fmt, lui_fmt): New variables.
778 (mem12_fmt, mfhl_fmt, shft_fmt, trap_fmt): Likewise.
779 (BRK_FMT, COP12_FMT, JALR_FMT, LUI_FMT): New macros.
780 (MEM12_FMT, MFHL_FMT, SHFT_FMT, TRAP_FMT): Likewise.
781 (macro_build): Handle microMIPS ASE. Update for append_insn
783 (mips16_macro_build): Update for append_insn interface change.
784 (macro_build_jalr): Handle microMIPS ASE.
785 (macro_build_lui): Likewise. Simplify.
786 (load_register): Handle microMIPS ASE.
787 (load_address): Likewise.
788 (move_register): Likewise.
789 (macro_build_branch_likely): New function.
790 (macro_build_branch_ccl): Likewise.
791 (macro_build_branch_rs): Likewise.
792 (macro_build_branch_rsrt): Likewise.
793 (macro): Handle microMIPS ASE.
794 (validate_micromips_insn): New function.
795 (expr_const_in_range): Likewise.
796 (mips_ip): Handle microMIPS ASE.
797 (options): Add OPTION_MICROMIPS and OPTION_NO_MICROMIPS.
798 (md_longopts): Add mmicromips and mno-micromips.
799 (md_parse_option): Handle OPTION_MICROMIPS and
801 (mips_after_parse_args): Handle microMIPS ASE.
802 (md_pcrel_from): Handle microMIPS relocations.
803 (mips_force_relocation): Likewise.
804 (md_apply_fix): Likewise.
805 (mips_align): Handle microMIPS ASE.
806 (s_mipsset): Likewise.
807 (s_cpload, s_cpsetup, s_cpreturn): Use relocation wrappers.
808 (s_dtprel_internal): Likewise.
809 (s_gpword, s_gpdword): Likewise.
810 (s_insn): Handle microMIPS ASE.
811 (s_mips_stab): Likewise.
812 (relaxed_micromips_32bit_branch_length): New function.
813 (relaxed_micromips_16bit_branch_length): New function.
814 (md_estimate_size_before_relax): Handle microMIPS ASE.
815 (mips_fix_adjustable): Likewise.
816 (tc_gen_reloc): Handle microMIPS relocations.
817 (mips_relax_frag): Handle microMIPS ASE.
818 (md_convert_frag): Likewise.
819 (mips_frob_file_after_relocs): Likewise.
820 (mips_elf_final_processing): Likewise.
821 (mips_nop_opcode): Likewise.
822 (mips_handle_align): Likewise.
823 (md_show_usage): Handle microMIPS options.
824 * symbols.c (TC_LABEL_IS_LOCAL): New macro.
825 (S_IS_LOCAL): Add a TC_LABEL_IS_LOCAL check.
827 * doc/as.texinfo (Target MIPS options): Add -mmicromips and
829 (-mmicromips, -mno-micromips): New options.
830 * doc/c-mips.texi (-mmicromips, -mno-micromips): New options.
831 (MIPS ISA): Document .set micromips and .set nomicromips.
832 (MIPS insn): Update for microMIPS support.
834 2011-07-24 Maciej W. Rozycki <macro@codesourcery.com>
836 * config/tc-mips.c (mips_ip): Make a copy of the instruction's
837 mnemonic and use it for further processing.
839 2011-07-24 Maciej W. Rozycki <macro@codesourcery.com>
841 * config/tc-mips.c (can_swap_branch_p): Adjust for the rename of
842 INSN_TRAP to INSN_NO_DELAY_SLOT. Remove the check for INSN_SYNC
843 as well as explicit checks for ERET and DERET when scheduling
846 2011-07-22 H.J. Lu <hongjiu.lu@intel.com>
848 * config/tc-i386.c (cpu_arch): Add k1om.
849 (i386_align_code): Handle PROCESSOR_K1OM.
850 (check_cpu_arch_compatible): Check EM_K1OM.
851 (i386_arch): Handle Intel K1OM.
852 (i386_mach): Return bfd_mach_k1om for Intel K1OM.
853 (i386_target_format): Return ELF_TARGET_K1OM_FORMAT for Intel
856 * config/tc-i386.h (ELF_TARGET_K1OM_FORMAT): New.
857 (processor_type): Add PROCESSOR_K1OM.
859 * doc/c-i386.texi: Document k1om.
861 2011-07-18 H.J. Lu <hongjiu.lu@intel.com>
863 * doc/c-i386.texi: Fix a typo.
865 2011-07-06 Aurelien Jarno <aurelien@aurel32.net>
867 * config/tc-mips.c (append_insn): delete prev_pinfo2 and pinfo2.
869 2011-07-04 Richard Sandiford <rdsandiford@googlemail.com>
871 * config/tc-mips.c (gpr_read_mask, gpr_write_mask): Fix handling
874 2011-07-04 Maciej W. Rozycki <macro@codesourcery.com>
876 * config/tc-mips.c (append_insn): Make sure DWARF-2 location
877 information is properly adjusted for branches that get swapped.
879 2011-07-03 Samuel Thibault <samuel.thibault@gnu.org>
880 Thomas Schwinge <thomas@schwinge.name>
883 * config/obj-elf.c (obj_elf_type): Use ELFOSABI_GNU name instead of
884 ELFOSABI_LINUX alias.
885 * config/tc-ia64.c: Likewise.
887 2011-06-30 Paul Carroll <pcarroll@codesourcery.com>
889 * config/tc-arm.c (do_t_add_sub): Only allow LSL shifts of less
890 than 4 in Thumb mode.
892 2011-06-30 Nick Clifton <nickc@redhat.com>
895 * config/tc-arm.c (BAD_RANGE): New error message define.
896 (md_apply_fix): Use it.
897 Fix range check for thumb branch instructions.
899 2011-06-29 Richard Sandiford <rdsandiford@googlemail.com>
901 * config/tc-mips.c (append_method): New enum.
902 (can_swap_branch_p, get_append_method): New functions.
903 (append_insn): Use get_append_method to decide how the instruction
906 2011-06-29 Richard Sandiford <rdsandiford@googlemail.com>
908 * config/tc-mips.c (append_insn): Remove bogus goto.
910 2011-06-29 Richard Sandiford <rdsandiford@googlemail.com>
912 * config/tc-mips.c (append_insn): Always clear the history after an
913 unconditional branch.
915 2011-06-29 Richard Sandiford <rdsandiford@googlemail.com>
917 * config/tc-mips.c (find_altered_mips16_opcode): New function.
918 (append_insn): Use it.
920 2011-06-29 Richard Sandiford <rdsandiford@googlemail.com>
922 * config/tc-mips.c (insn_uses_reg): Delete.
923 (gpr_read_mask, gpr_write_mask): New functions.
924 (fpr_read_mask, fpr_write_mask): Likewise.
925 (insns_between, nops_for_vr4130, append_insn): Use them.
927 2011-06-29 Richard Sandiford <rdsandiford@googlemail.com>
929 * config/tc-mips.c (md_mips_end): Call mips_emit_delays.
931 2011-06-29 Dave Martin <dave.martin@linaro.org>
934 * config/tc-arm.c (mapping_state): When changing to ARM or THUMB
935 state set the minimum required alignment of the section.
937 2011-06-29 Tristan Gingold <gingold@adacore.com>
939 * config/tc-i386.c (i386_mach): Convert to ISO-C.
940 (md_begin, pe_directive_secrel, md_estimate_size_before_relax): Ditto.
941 (md_convert_frag, md_apply_fix, md_undefined_symbol): Ditto.
942 (md_section_align, tc_gen_reloc): Ditto.
944 2011-06-28 Tristan Gingold <gingold@adacore.com>
946 * config/tc-alpha.c (s_alpha_pdesc): Fix indentation. Do not
949 2011-06-28 Tristan Gingold <gingold@adacore.com>
951 * config/tc-alpha.c (load_expression): Use alloca instead of xmalloc.
952 (emit_jsrjmp): Ditto.
953 (tc_gen_reloc): Ditto.
955 2011-06-28 Tristan Gingold <gingold@adacore.com>
957 * config/tc-alpha.c (alpha_evax_proc_hash): Remove.
958 (alpha_evax_proc_data): New variable.
959 (s_alpha_ent): Prevent nested function. Remove has_insert call.
960 (s_alpha_pdesc): Do not call demand_empty_rest_of_line in case of
961 error. Do not search in the hash table. Check if match with .ent.
962 (s_alpha_name): Remove unused variable.
963 (md_begin): Remove initialization of alpha_evax_proc_hash.
965 2011-06-27 Tristan Gingold <gingold@adacore.com>
967 * config/tc-alpha.c (add_to_link_pool): Remove basesym parameter.
968 Locally declare basesym. Add comments. Do not set literal_pool_size.
969 (load_expression): Adjust call to add_to_link_pool.
970 (s_alpha_pdesc): Define pdesc symbol using dot.
971 Do not set literal_pool_size.
972 (s_alpha_end): Use NULL instead of 0.
974 2011-06-27 Tristan Gingold <gingold@adacore.com>
976 * config/obj-evax.c (evax_frob_file_before_adjust): Add comments.
978 * config/obj-evax.h (struct alpha_linkage_fixups): Remove seg
980 (obj_symbol_type, object_headers, OBJ_SYMFIELD_TYPE): Remove
982 2011-06-26 Richard Sandiford <rdsandiford@googlemail.com>
984 * config/tc-mips.c (fix_24k_record_store_info): If the previous
985 instruction was a store, and the next instructions are unknown,
988 2011-06-25 Richard Sandiford <rdsandiford@googlemail.com>
991 * config/tc-mips.c (nops_for_vr4130, nops_for_24k, nops_for_insn)
992 (nops_for_sequence, nops_for_insn_or_target): Add ignore parameters.
993 (mips_emit_delays, start_noreorder): Update accordingly.
994 (append_insn): Likewise. Revert original fix for this PR
995 and use the ignore parameter instead.
997 2011-06-24 Tristan Gingold <gingold@adacore.com>
1000 * config/obj-evax.c (evax_frob_symbol): Use as_bad instead of abort.
1002 2011-06-24 Tristan Gingold <gingold@adacore.com>
1004 * config/tc-alpha.c (add_to_link_pool): Remove useless offset
1005 variable. Fix style.
1007 2011-06-23 Richard Sandiford <rdsandiford@googlemail.com>
1010 * config/tc-mips.c (append_insn): Only consider hazards between the
1011 pre-noreorder block and ip.
1013 2011-06-21 Sameera Deshpande <sameera.deshpande@arm.com>
1015 * config/tc-arm.c (vfp_conv): Add check on range of immediate operand
1016 in vcvt instruction between floating-point and fixed-point.
1017 (operand_parse_code): Add "OP_oI32z".
1018 (parse_operands): OP_oI32z case added.
1020 2011-06-20 H.J. Lu <hongjiu.lu@intel.com>
1022 * configure.tgt: Revert x32 change.
1024 2011-06-20 Nick Clifton <nickc@redhat.com>
1026 * doc/Makefile.am: (CPU_DOCS): Add c-xstormy16.texi.
1027 * doc/Makefile.in: Regenerate.
1028 * doc/all.texi: Set XSTORMY16.
1029 * doc/c-xstormy16.texi: New file.
1031 2011-06-19 H.J. Lu <hongjiu.lu@intel.com>
1033 * configure.tgt: Support x32.
1035 2011-06-15 Nick Clifton <nickc@redhat.com>
1037 * NEWS: Mention addition of TILEPRO and TIKE-Gx support.
1039 2011-06-14 Tristan Gingold <gingold@adacore.com>
1041 * config/tc-ppc.h (struct ppc_tc_sy): Complete comment on within.
1042 (tc_new_dot_label): Define.
1043 (ppc_new_dot_label): Declare.
1044 * config/tc-ppc.c (ppc_frob_label): Set within target field.
1045 (ppc_fix_adjustable): Use this field to adjust the reloc.
1046 (ppc_new_dot_label): New function.
1048 2011-06-14 Alan Modra <amodra@gmail.com>
1050 * po/POTFILES.in: Regenerate.
1052 2011-06-13 Walter Lee <walt@tilera.com>
1054 * Makefile.am (TARGET_CPU_CFILES): Add config/tc-tilegx.c and
1055 config/tc-tilepro.c.
1056 (TARGET_CPU_HFILES): Add config/tc-tilegx.h and
1057 config/tc-tilepro.h.
1058 * Makefile.in: Regenerate.
1059 * configure.tgt (tilepro-*-*): New.
1060 (tilegx-*-*): Likewise.
1061 * config/tc-tilegx.c: New file.
1062 * config/tc-tilegx.h: Likewise.
1063 * config/tc-tilepro.h: Likewise.
1064 * config/tc-tilepro.c: Likewise.
1065 * doc/Makefile.am (CPU_DOCS): Add c-tilegx.texi and
1067 * doc/Makefile.in: Regenerate.
1068 * doc/all.texi (TILEGX): Define.
1070 * doc/as.texinfo: Add Tile-Gx and TILEPro documentation. Include
1071 c-tilegx.texi and c-tilepro.texi.
1072 * doc/c-tilegx.texi: New.
1073 * doc/c-tilepro.texi: New.
1075 2011-06-13 Nick Clifton <nickc@redhat.com>
1078 * config/tc-arm.c (do_shift): Do not allow shift operations at the
1079 end of a register based shift insn.
1080 (do_t_shift): Likewise.
1082 2011-06-13 Nick Clifton <nickc@redhat.com>
1084 * config/tc-score.c (s3_my_get_expression): Delete unused local
1086 (s3_do_ldst_insn): Delete unused local variable 'strbak'.
1087 (s3_do16_ldst_insn): Delete unused local variable 'temp'.
1088 (s3_do_macro_bcmp): Zero inst_expand array.
1089 (s3_do_macro_bcmpz): Likewise.
1090 (s3_s_score_end): Delete unused local variable 'dot'.
1091 (s3_gen_reloc): Delete unused local variables 'f', 's', and 'e'.
1092 * config/tc-score7.c (s7_my_get_expression): Delete unused local
1094 (s7_do_ldst_insn): Delete unused local variable 'strbak'.
1095 (s7_b32_relax_to_b16): Delete unused local variables 'r_old' and
1097 (s7_s_score_end): Delete unused local variable 'dot'.
1098 (s7_relax_frag): Delete unused local variable 'relax_size'.
1099 (s7_gen_reloc): Delete unused local variables 'f', 's', and 'e'.
1101 2011-06-10 H.J. Lu <hongjiu.lu@intel.com>
1103 AVX Programming Reference (June, 2011)
1104 * config/tc-i386.c (i386_error): Add invalid_vsib_address and
1105 unsupported_vector_index_register.
1106 (cpu_arch): Add .avx2, .bmi2, .lzcnt and .invpcid.
1107 (check_VecOperands): New.
1108 (match_template): Call check_VecOperands. Handle
1109 invalid_vsib_address and unsupported_vector_index_register.
1110 (build_modrm_byte): Support VecSIB. Check register-only source
1111 operand when two source operands are swapped.
1112 (i386_index_check): Allow Xmm/Ymm index registers.
1114 * doc/c-i386.texi: Document avx2/.avx2, bmi2/.bmi2, lzcnt/.lzcnt
1115 and invpcid./invpcid.
1117 2011-06-09 Nick Clifton <nickc@redhat.com>
1120 * config/tc-cr16.c (tc_gen_reloc): Remove unused local variable
1122 (check_cinv_options): Remove unused local variables. Make
1124 (md_assemble): Remove unused local variable.
1126 2011-06-09 James Greenhalgh <james.greenhalgh@arm.com>
1128 * config/tc-arm.c (do_ldrd): Warn in unpredictable cases.
1130 2011-06-03 Arnaud Patard <arnaud.patard@rtp-net.org>
1133 * config/tc-arm.c (parse_psr): Set m_profile to false when
1134 assembling for any architecture.
1136 2011-06-02 Jie Zhang jie@codesourcery.com
1137 Nathan Sidwell nathan@codesourcery.com
1139 * config/tc-arm.c (parse_address_main): Handle -0 offsets.
1140 (encode_arm_addr_mode_2): Set default sign of zero here ...
1141 (encode_arm_addr_mode_3): ... and here.
1142 (encode_arm_cp_address): ... and here.
1143 (md_apply_fix): Use default sign of zero here.
1145 2011-06-02 Nick Clifton <nickc@redhat.com>
1147 * as.c: Fix spelling typo.
1149 * config/tc-ppc.c: Likewise.
1150 * po/gas.pit: Regenerate.
1152 2011-05-31 Paul Brook <paul@codesourcery.com>
1154 * config/tc-arm.c (arm_cpus): Add Cortex-R5.
1155 (arm_extensions): Allow idiv on ARMv7-R.
1156 * doc/c-arm.text: Update idiv extension restrictions.
1158 2011-05-31 Paul Brook <paul@codesourcery.com>
1160 * config/tc-arm.c (arm_force_relocation): Resolve all pc-relative
1163 2011-05-31 Paul Brook <paul@codesourcery.com>
1165 * config/tc-arm.c (do_t_branch): Avoid relaxing branches to constant
1168 2011-05-31 Paul Brook <paul@codesourcery.com>
1169 Nathan Sidwell <nathan@codesourcery.com>
1171 * config/tc-arm.c (fix_new_arm): Create an absolute symbol for
1172 pc-relative fixes to constants.
1173 * config/tc-arm.h (TC_FORCE_RELOCATATION_ABS): Define.
1175 2011-05-27 Nick Clifton <nickc@redhat.com>
1177 * config/tc-s390.c (md_begin): Remove unused variable dup_insn.
1179 2011-05-24 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
1181 * config/tc-s390.c (md_gather_operands): Fix check for floating
1182 register pair operands.
1184 2011-05-24 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
1186 * config/tc-s390.c (md_gather_operands): Emit an error for odd
1187 numbered registers used as register pair operand.
1189 2011-05-23 Nick Clifton <nickc@redhat.com>
1191 * config/tc-v850.h (TC_FX_SIZE_SLACK): Define.
1193 2011-05-20 Bernd Schmidt <bernds@codesourcery.com>
1195 * config/tc-tic6x.c (tic6x_operators): Add "pcr_offset".
1196 (tic6x_parse_name): Handle it.
1197 (tic6x_fix_new_exp): Handle O_pcr_offset.
1198 (tic6x_fix_adjustable): Return 0 for the new relocs.
1199 (md_apply_fix): Handle them.
1200 (tc_gen_reloc): Likewise.
1201 * config/tc-tic6x.h (tic6x_fix_info): Add a fix_subsy member.
1203 2011-05-18 Nick Clifton <nickc@redhat.com>
1206 * config/tc-tic30.c (ordinal_names): Allow translation of the
1209 2011-05-18 Nick Clifton <nickc@redhat.com>
1211 * config/tc-arm.c (s_unreq): Reword warning message to make it
1212 easier to translate.
1213 * config/tc-ia64.c (md_show_usage): Add note for translators.
1214 * configure.in (ALL_LINGUAS): Add "fi".
1215 * configure: Regenerate.
1217 2011-05-18 Tristan Gingold <gingold@adacore.com>
1219 * config/tc-ppc.h (ppc_tc_sy): Reorder fields.
1220 Put size into an union with dw.
1221 (OBJ_COPY_SYMBOL_ATTRIBUTES): Adjust.
1222 (ppc_xcoff_end): Declare.
1224 * config/tc-ppc.c: Add includes for xcoff.
1225 (ppc_dwsect): New function.
1226 (md_pseudo_table): Add dwsect.
1227 (struct dw_subsection): New.
1229 (ppc_change_debug_section): New function.
1230 (ppc_xcoff_end): Ditto.
1231 (ppc_function): Adjust for ppc_tc_sy.
1232 (ppc_symbol_new_hook): Ditto.
1233 (ppc_frob_symbol): Ditto.
1234 (ppc_frob_section): Do not set vma for debug sections.
1235 (ppc_fix_adjustable): Return true for debug sections.
1236 * config/obj-coff.c: Add includes for xcoff.
1237 (coff_frob_section): Handle dwarf section.
1239 2011-05-17 Nick Clifton <nickc@redhat.com>
1241 * po/fi.po: New Finnish translation.
1242 * po/fr.po: Updated French translation.
1244 * config/tc-m32r.c (md_show_usage): Fix typos in descriptions.
1245 * config/tc-mt.c (md_assemble): Fix typos in warning messages.
1246 * cond.c (s_else): Fix typos in error messages.
1247 * config/tc-pj.c (md_assemble): Fix typo in error message.
1249 2011-05-16 Hans-Peter Nilsson <hp@axis.com>
1251 * config/tc-cris.c (md_parse_option) <OPTION_PIC>: Error if not
1252 emitting ELF object.
1253 (md_show_usage): Only mention --pic if the assembler can generate
1255 * doc/c-cris.texi (CRIS-Opt): Mention that generating ELF is a
1256 prerequisite for --pic being a valid option.
1258 2011-05-13 Frederic Marchal <fmarchal@perso.be>
1261 * config/tc-v850.c (parse_register_list): Correct error string.
1263 2011-05-12 Quentin Neill <quentin.neill@amd.com>
1265 * config/tc-i386.c (cpu_arch): Rename PROCESSOR_BDVER1 to PROCESSOR_BD.
1266 (i386_align_code): Ditto
1268 2011-05-12 Matthew Gretton-Dann <matthew.gretton-dann@arm.com>
1271 * config/tc-arm.c (parse_big_immediate): Fix parsing of 64-bit
1272 immediates on 32-bit hosts.
1274 2011-05-10 Quentin Neill <quentin.neill@amd.com>
1276 * config/tc-i386.c (cpu_arch): Add bdver2 and rename
1277 PROCESSOR_BDVER1 to PROCESSOR_BDVER.
1278 (i386_align_code): Rename PROCESSOR_BDVER1.
1279 (processor_type): Ditto.
1280 * doc/c-i386.texi: Add bdver2.
1282 2011-05-10 Alan Modra <amodra@gmail.com>
1284 * dw2gencfi.c (tc_cfi_endproc): Avoid "set but not used" error.
1286 2011-05-09 Paul Brook <paul@codesourcery.com>
1288 * config/tc-tic6x.c (streq): Define.
1289 (tic6x_get_unwind): New.
1290 (s_tic6x_cantunwind, s_tic6x_handlerdata, s_tic6x_endp,
1291 s_tic6x_personalityindex, s_tic6x_personality): New functions.
1292 (md_pseudo_table): Add "endp", "handlerdata", "personalityindex",
1293 "personality" and "cantunwind".
1294 (tic6x_regname_to_dw2regnum, tic6x_frame_initial_instructions,
1295 tic6x_start_unwind_section, tic6x_unwind_frame_regs,
1296 tic6x_pop_rts_offset_little, tic6x_pop_rts_offset_big,
1297 tic6x_unwind_reg_from_dwarf, tic6x_flush_unwind_word,
1298 tic6x_unwind_byte, tic6x_unwind_2byte, tic6x_unwind_uleb,
1299 tic6x_cfi_startproc, output_exidx_entry, tic6x_output_unwinding,
1300 tic6x_cfi_endproc): New.
1301 * config/tc-tic6x.h (TIC6X_NUM_UNWIND_REGS): Define.
1302 (tic6x_unwind_info): New.
1303 (tic6x_segment_info_type): Add marked_pr_dependency, unwind and
1305 (TARGET_USE_CFIPOP, tc_regname_to_dw2regnum,
1306 tc_cfi_frame_initial_instructions, DWARF2_DEFAULT_RETURN_COLUMN,
1307 DWARF2_CIE_DATA_ALIGNMENT, tc_cfi_startproc, tc_cfi_endproc,
1308 tc_cfi_section_name): Define.
1309 * doc/c-tic6x.texi: Document new unwinding directives.
1310 * dw2gencfi.c (tc_cfi_startproc, tc_cfi_endproc): Add default
1312 (cfi_insn_data, fde_entry, CFI_adjust_cfa_offset, CFI_return_column,
1313 CFI_rel_offset, CFI_escape, CFI_signal_frame, CFI_val_encoded_addr):
1314 Move to dw2gencfi.h.
1315 (CFI_EMIT_target): Define.
1316 (dot_cfi_sections): Check tc_cfi_section_name.
1317 (dot_cfi_startproc): Use tc_cfi_startproc.
1318 (dot_cfi_endproc): Use tc_cfi_endproc.
1319 * dw2gencfi.h (cfi_insn_data, fde_entry, CFI_adjust_cfa_offset,
1320 CFI_return_column, CFI_rel_offset, CFI_escape, CFI_signal_frame,
1321 CFI_val_encoded_addr): Move to here from dw2gencfi.c.
1323 2011-05-07 Alan Modra <amodra@gmail.com>
1325 * dw2gencfi.c (CUR_SEG, SET_CUR_SEG, HANDLED, SET_HANDLED): Define.
1326 Use throughout in place of #if SUPPORT_FRAME_LINKONCE.
1327 (struct fde_entry): Rename cseg to cur_seg.
1328 (cfi_change_reg_numbers): Remove ATTRIBUTE_UNUSED.
1329 (get_cfi_seg): Likewise. Use if (SUPPORT_FRAME_LINKONCE) rather
1330 that #if SUPPORT_FRAME_LINKONCE.
1331 (cfi_finish): Likewise.
1333 2011-05-06 Tristan Gingold <gingold@adacore.com>
1335 * read.c (s_comm_internal): Remove code for OBJ_VMS.
1338 * write.c (write_object_file): Ditto.
1339 * symbols.c (define_sym_at_dot): Ditto.
1342 2011-05-05 Alan Modra <amodra@gmail.com>
1344 * dw2gencfi.c (SUPPORT_FRAME_LINKONCE): Define. Use throughout
1345 file to conditionally compile code added 2011-04-26.
1346 (cfi_change_reg_numbers): Add ATTRIBUTE_UNUSED on params only used
1347 when SUPPORT_FRAME_LINKONCE.
1348 (get_cfi_seg): Likewise. Reintroduce old code for when not
1349 SUPPORT_FRAME_LINKONCE.
1350 (cfi_finish): Move get_cfi_seg calls out of loop when not
1351 SUPPORT_FRAME_LINKONCE. Avoid unused var warning.
1353 2011-05-03 Paul Brook <paul@codesourcery.com>
1355 * config/tc-tic6x.c (s_ehtype): New function.
1356 (md_pseudo_table): Add "ehtype".
1357 (tic6x_fix_adjustable, md_apply_fix): BFD_RELOC_C6000_EHTYPE.
1358 * doc/c-tic6x.texi: Document .ehtype directive.
1360 2011-04-26 Kai Tietz <ktietz@redhat.com>
1362 * dw2gencfi.c (dwcfi_seg_list): New struct.
1363 (dwcfi_hash): New static hash variable.
1364 (get_debugseg_name): New.
1365 (alloc_debugseg_item): New.
1366 (make_debug_seg): New.
1367 (dwcfi_hash_insert): New.
1368 (dwcfi_hash_find): New.
1369 (dwcfi_hash_find_or_make): New.
1370 (cfi_insn_data): New member cur_seg.
1371 (cie_entry): Likewise.
1372 (fde_entry): New cseg and handled members.
1373 (alloc_fde_entry): Initialize cseg member.
1374 (alloc_cfi_insn_data): Initialize cur_seg member.
1375 (dot_cfi_sections): Compare for beginning of
1376 section names via strncmp.
1378 (cfi_finish): Treat link-once sections.
1379 (is_now_linkonce_segment): New local helper.
1380 (output_cie): Ignore cie entries not member of current
1382 (output_fde): Likewise.
1383 (select_cie_for_fde): Likewise.
1384 (cfi_change_reg_numbers): Add new argument for current segment
1385 and ignore insn elements, if not part of current segment.
1386 * ehopt.c (get_cie_info): Use strncmp for
1387 section name matching.
1388 (heck_eh_frame): Likewise.
1390 2011-04-20 Catherine Moore <clm@codesourcery.com>
1391 David Ung <davidu@mips.com>
1393 * config/mips.c (mips_cl_insn): Add new field complete_p.
1394 (create_insn): Initialize complete_p to zero.
1396 (fix_24k_align_to): New.
1397 (fix_24k_store_info): Declare.
1398 (fix_24k_sort): New.
1399 (fix_24k_record_store_info): New.
1400 (nops_for_24k): New.
1401 (nops_for_insn): Call nops_for_24k.
1402 (append_insn): Move O_constant expression handling.
1404 2011-04-20 Alan Modra <amodra@gmail.com>
1406 * hash.c (set_gas_hash_table_size): Use bfd_hash_set_default_size.
1407 (hash_new_sized): New function, split out from..
1410 2011-04-19 Nick Clifton <nickc@redhat.com>
1412 * config/tc-arm.c (v7m_psrs): Revert previous delta.
1414 2011-04-18 Julian Brown <julian@codesourcery.com>
1415 Nick Clifton <nickc@redhat.com>
1417 * config/tc-arm.c (parse_psr): Use selected_cpu not cpu_variant to
1418 detect M-profile targets.
1419 (do_t_swi): Exclude v7 and higher variants from arm_ext_os test.
1420 (v7m_psrs): Fix typo: basepri_max should be basepri_mask.
1422 2011-04-14 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
1424 * config/tc-s390.c (s390_machine): New prototype.
1425 (md_pseudo_table): New pseudo-op .machine.
1426 (s390_opcode_hash): Initialize to NULL.
1427 (s390_parse_cpu): New function.
1428 (md_parse_option): Use s390_parse_cpu.
1429 (s390_setup_opcodes): New function.
1430 (md_begin): Use s390_setup_opcodes.
1431 (s390_machine): New hook handling the new .machine pseudo.
1433 * doc/c-s390.texi: Document the new pseudo op .machine.
1435 2011-04-12 H.J. Lu <hongjiu.lu@intel.com>
1437 * config/tc-i386.c (i386_mach): Start error message with lower
1439 (md_begin): Likewise.
1440 (md_parse_option): Likewise.
1441 (i386_target_format): Likewise.
1442 (check_byte_reg): Likewise.
1443 (check_long_reg): Likewise.
1444 (check_qword_reg): Likewise.
1445 (check_word_reg): Likewise.
1447 2011-04-12 Nick Clifton <nickc@redhat.com>
1450 * config/tc-arm.c (relax_branch): Do not relax branches to
1451 preemptable global symbols.
1453 2011-04-11 Julian Brown <julian@codesourcery.com>
1455 * config/tc-arm.c (parse_psr): Add LHS argument. Improve support
1457 (operand_parse_code): Replace OP_PSR with OP_wPSR and OP_rPSR.
1459 (parse_operands): Likewise.
1460 (do_mrs): Tweak error message for constraint.
1461 (do_t_mrs): Update constraints for changes to APSR support.
1462 (do_t_msr): Likewise. Don't set PSR_f flag here.
1463 (psrs): Remove "g", "nzcvq", "nzcvqg".
1464 (insns): Tweak entries for msr and mrs instructions.
1466 2011-04-11 Kai Tietz <ktietz@redhat.com>
1468 * config/tc-i386.c (x86_cons): Initialize adjust with zero.
1470 2011-04-11 Nick Clifton <nickc@redhat.com>
1472 * config/tc-i386.c (x86_cons): Define even for non-ELF targets.
1473 * config/tc-i386.h (x86_cons): Always prototype.
1475 * config/tc-cr16.c (getprocregp_image): Fix type of 'r' parameter
1476 in order to avoid a compile time warning.
1477 (getprocreg_image): Likewise.
1479 2011-04-11 Alan Modra <amodra@gmail.com>
1481 * config/tc-cr16.c (getprocreg_image): Correct range check.
1482 (getprocregp_image): Likewise.
1484 2011-04-06 Joseph Myers <joseph@codesourcery.com>
1486 * configure.tgt (strongarm*be, strongarm*b, strongarm*,
1487 xscale*be|xscale*b, xscale*): Remove architectures.
1488 (thumb-*-coff, thumb-*-rtems*, thumb-*-elf, thumb-epoc-pe,
1489 thumb-*-pe, xscale-*-coff, xscale-*-elf): Remove targets.
1491 2011-04-01 Tristan Gingold <gingold@adacore.com>
1493 * config/tc-ia64.c (md_apply_fix): Add a cast to avoid a warning.
1495 2011-03-31 Bernd Schmidt <bernds@codesourcery.com>
1497 * config/tc-tic6x.c (sbss_section, scom_section, scom_symbol): New
1499 (md_begin): Initialize them.
1500 (s_tic6x_scomm): New static function.
1501 (md_pseudo_table): Add "scomm".
1502 (tc_gen_reloc): Really undo all adjustments made by
1503 bfd_install_relocation.
1504 * doc/c-tic6x.texi: Document the .scomm directive.
1506 2011-03-31 Tristan Gingold <gingold@adacore.com>
1508 * dwarf2dbg.c (DWARF2_VERSION): Define.
1509 (out_debug_line): Use it.
1510 (out_debug_aranges): Ditto.
1511 (out_debug_info): Ditto.
1512 * config/tc-ia64.h (DWARF2_VERSION): Override it.
1514 2011-03-30 Michael Snyder <msnyder@vmware.com>
1516 * obj-elf.c (obj_elf_section): Free malloced name.
1517 * macro.c (get_any_string): Free malloced br_buf.
1518 (do_formals): Free 'formal'.
1520 2011-03-30 Tristan Gingold <gingold@adacore.com>
1522 * config/tc-ppc.c (ppc_frob_symbol): Convert stsym symbols value
1523 to offset only if within is set.
1524 (ppc_stabx): Reformat. For stsym stabs, add a check and set
1525 within only for symbols.
1527 2011-03-29 Richard Henderson <rth@redhat.com>
1530 * config/tc-alpha.c (s_alpha_align): Don't auto-align a previous
1531 label; zap alpha_insn_label.
1533 2011-03-29 H.J. Lu <hongjiu.lu@intel.com>
1535 * config/tc-i386.c (handle_quad): Properly handle multiple
1538 2011-03-29 Mike Frysinger <vapier@gentoo.org>
1540 * config/bfin-parse.y (BYTEUNPACK): Return yyerror when dest
1541 reg $2 is the same as dest reg $4.
1543 2011-03-29 Mike Frysinger <vapier@gentoo.org>
1545 * config/bfin-parse.y (BYTEOP16M): Return yyerror when dest
1546 reg $2 is the same as dest reg $4.
1548 2011-03-29 Mike Frysinger <vapier@gentoo.org>
1550 * config/bfin-parse.y (BYTEOP16P): Return yyerror when dest
1551 reg $2 is the same as dest reg $4.
1553 2011-03-28 Mike Frysinger <vapier@gentoo.org>
1555 * config/bfin-parse.y (16bit acc add): Return yyerror when dest
1556 reg $1 is the same as dest reg $7.
1558 2011-03-28 H.J. Lu <hongjiu.lu@intel.com>
1560 * config/tc-i386.c (handle_quad): New.
1561 (md_pseudo_table): Add "quad".
1563 2011-03-26 John Marino <binutils@marino.st>
1565 * configure.tgt: Fix support for *-*-dragonfly*.
1566 * config/tc-i386.c: define SVR4_COMMENT_CHARS for dragonfly.
1567 * config/te-dragonfly.h: New file.
1569 2011-03-24 Eric B. Weddington <eric.weddington@atmel.com>
1571 * config/tc-avr.c (mcu_types): Add new devices: atmega325pa,
1572 atmega3250pa, atmega3290pa, atmega16hvbrevb, atmega32hvbrevb,
1574 * doc/c-avr.texi: Document new device names.
1576 2011-03-24 Mike Frysinger <vapier@gentoo.org>
1578 * config/bfin-parse.y (dual 32bit add/sub): Return yyerror when dest
1579 reg $1 is the same as dest reg $7.
1580 (quad 16bit add/sub): Return yyerror when dest reg $1 is the same as
1583 2011-03-24 Mike Frysinger <vapier@gentoo.org>
1585 * config/bfin-parse.y (check_macfuncs): Clarify error message when
1586 P is mismatched. Check destination regno are off by one when P is
1587 set, or are equal when P is not set.
1589 2011-03-23 Mike Frysinger <vapier@gentoo.org>
1591 * config/bfin-parse.y (SEARCH): Return yyerror when dest reg $2 is
1592 the same as dest reg $4.
1593 (BITMUX): Return yyerror when dest reg $3 is the same as dest reg $5.
1595 2011-03-23 Eric B. Weddington <eric.weddington@atmel.com>
1597 * config/tc-avr.c (mcu_types): Add new xmega devices: atxmega64a1u,
1598 atxmega128a1u, atxmega16x1, atxmega32x1, atxmega128b1, atxmega256a3bu.
1599 * doc/c-avr.texi: Document new device names.
1601 2011-03-22 Eric B. Weddington <eric.weddington@atmel.com>
1603 * config/tc-avr.c (struct avr_opcodes_s): Add opcode field.
1604 (AVR_INSN): Change definition to match.
1605 (avr_opcodes): Likewise, change to match.
1606 (mcu_types): Add XMEGA architecture names and new XMEGA device names.
1607 (md_show_usage): Add XMEGA architecture names.
1608 (avr_operand): Add 'E' constraint for DES instruction of XMEGA devices.
1609 Add support for SPM Z+ instruction.
1610 * doc/c-avr.texi: Add documentation for XMEGA architectures and
1613 2011-03-21 Eric B. Weddington <eric.weddington@atmel.com>
1615 * config/tc-avr.c (md_show_usage): Add "Assembler" text to output.
1617 2011-03-18 Alan Modra <amodra@gmail.com>
1619 * config/obj-elf.c (elf_frob_symbol): Report S_SET_SIZE symbol
1620 on .size expression errors rather than symbols in the size expression.
1622 2011-03-18 Alan Modra <amodra@gmail.com>
1624 * input-scrub.c (line_numberT): Delete.
1625 (input_scrub_close): Reset line counters.
1626 * messages.c (as_show_where): Don't print invalid line number.
1627 (as_warn_internal, as_bad_internal): Likewise.
1629 2011-03-18 Alan Modra <amodra@gmail.com>
1631 * read.c (read_a_source_file): Remove md_after_pass_hook.
1632 Move "quit" label before set of dot_symbol.
1633 * config/tc-d10v.h (md_after_pass_hook): Don't define.
1634 * config/tc-d30v.h (md_after_pass_hook): Likewise.
1635 * config/tc-m32r.h (md_after_pass_hook): Likewise.
1636 (md_cleanup): Define to call m32r_fill_insn.
1638 2011-03-18 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
1640 * config/tc-s390.c (md_parse_option): Add -march=all option which
1641 switches to the highest available CPU.
1643 2011-03-17 Alan Modra <amodra@gmail.com>
1646 * expr.c (operand): Correct passing of "mode" to expr.
1647 * read.c (do_org): Allow expr_section.
1648 (get_known_segmented_expression): Don't assert anything about the
1651 2011-03-16 H.J. Lu <hongjiu.lu@intel.com>
1653 * as.c (show_usage): Add --size-check=.
1654 (parse_args): Add and handle OPTION_SIZE_CHECK.
1656 * as.h (flag_size_check): New.
1658 * config/obj-elf.c (elf_frob_symbol): Use as_bad to report
1659 bad .size directive only for --size-check=error.
1661 * doc/as.texinfo: Document --size-check=.
1663 2011-03-14 Mike Frysinger <vapier@gentoo.org>
1665 * config/tc-bfin.c (bfin_cpus[]): Add 0.4 for
1666 bf542/bf544/bf547/bf548/bf549.
1668 2011-03-14 Richard Sandiford <richard.sandiford@linaro.org>
1670 * config/tc-arm.c (md_pcrel_from_section): Use S_FORCE_RELOC to
1671 determine whether a relocation is needed.
1672 (md_apply_fix, arm_apply_sym_value): Likewise.
1674 2011-03-14 Richard Sandiford <richard.sandiford@linaro.org>
1676 * config/tc-arm.c (arm_adjust_symtab): Set the branch type
1679 2011-03-11 Nick Clifton <nickc@redhat.com>
1681 * remap.c (remap_debug_filename): Always allocate a buffer for the
1683 * stabs.c (stabs_generate_asm_file): Free the pointer returned by
1684 remap_debug_filename.
1686 2011-03-10 Michael Snyder <msnyder@vmware.com>
1688 Revert the following change:
1689 * dwarf2dbg.c (out_file_list): Free malloced 'dir'.
1690 (out_debug_info): Free malloced 'dirname' and 'comp_dir'.
1692 2011-03-10 Alan Modra <amodra@gmail.com>
1694 * gas/config/obj-elf.h (ELF_TARGET_SYMBOL_FIELDS,
1695 TARGET_SYMBOL_FIELDS): Don't define.
1696 * gas/config/tc-arc.c (arc_common): Use correct symbol "local" field.
1698 2011-03-09 Michael Snyder <msnyder@vmware.com>
1700 * dwarf2dbg.c (out_file_list): Free malloced 'dir'.
1701 (out_debug_info): Free malloced 'dirname' and 'comp_dir'.
1702 (emit_fixed_inc_line_addr): Assign instead of conditional in
1705 2011-03-05 H.J. Lu <hongjiu.lu@intel.com>
1707 * config/obj-elf.c (elf_frob_symbol): Mention symbol name in
1708 non-constant .size expression.
1710 2011-03-02 Nick Clifton <nickc@redhat.com>
1712 * ecoff.c: Incldue filenames.h
1714 2011-02-28 Kai Tietz <kai.tietz@onevision.com>
1716 * depend.c (register_dependency): Use filename_(n)cmp.
1717 * dwarf2dbg.c (get_filenum): Likewise.
1718 * ecoff.c (add_file): Likewise.
1719 (ecoff_generate_asm_lineno): Likewise.
1720 * input-scrub.c (new_logical_line_flags): Likewise.
1721 * listing.c (file_info): Likewise.
1722 (listing_newline): Likewise.
1723 * remap.c (remap_debug_filename): Likewise.
1724 * stabs.c (generate_asm_file): Likewise.
1725 (stabs_generate_asm_lineno): Likewise.
1727 2011-02-28 Maciej W. Rozycki <macro@codesourcery.com>
1729 * config/tc-mips.c (append_insn): Disable branch relaxation for
1732 2011-02-28 Maciej W. Rozycki <macro@codesourcery.com>
1734 * config/tc-mips.c (macro): Handle M_PREF_AB.
1736 2011-02-28 Maciej W. Rozycki <macro@codesourcery.com>
1738 * config/tc-mips.c (RELAX_BRANCH_ENCODE): Encode the temporary
1740 (RELAX_BRANCH_UNCOND): Adjust accordingly.
1741 (RELAX_BRANCH_LIKELY): Likewise.
1742 (RELAX_BRANCH_LINK): Likewise.
1743 (RELAX_BRANCH_TOOFAR): Likewise.
1744 (RELAX_BRANCH_AT): New macro.
1745 (append_insn): Encode the temporary register to use in standard
1746 MIPS branch relaxation.
1747 (relaxed_branch_length): Update according to changes to
1748 RELAX_BRANCH_ENCODE.
1749 (md_convert_frag): Use the encoded register as the temporary.
1751 2011-02-28 Maciej W. Rozycki <macro@codesourcery.com>
1753 * config/tc-mips.c (mips_fix_adjustable): On REL targets also
1754 reject PC-relative relocations.
1756 2011-02-28 Maciej W. Rozycki <macro@codesourcery.com>
1758 * config/tc-mips.c (md_convert_frag): Correct message
1761 2011-02-28 Alan Modra <amodra@gmail.com>
1763 * symbols.c (report_op_error): Remove unnecessary forward declaration.
1764 Add "op" parameter. Report operator and operand segments in error
1765 message, not operand symbols.
1766 (resolve_symbol_value): Always set segment for equated symbols, not
1767 just when finalizing. Adjust report_op_error calls.
1769 2011-02-25 H.J. Lu <hongjiu.lu@intel.com>
1771 * config/tc-i386.c (reloc): Don't sign-check 4-byte relocations
1772 if 64bit relocations aren't allowed.
1774 2011-02-25 Alan Modra <amodra@gmail.com>
1777 * config/obj-elf.c (elf_frob_symbol): Properly handle size expression.
1779 2011-02-21 Maciej W. Rozycki <macro@codesourcery.com>
1781 * config/tc-mips.c (mips_ip) <'o'>: Remove duplicate
1782 initialization of offset_reloc.
1784 2011-02-15 Richard Henderson <rth@redhat.com>
1786 * dw2gencfi.c (dot_cfi_dummy): New.
1787 (cfi_pseudo_table) [!TARGET_USE_CFIPOP]: New.
1788 * read.c (pobegin): Unconditionally call cfi_pop_insert.
1790 2011-02-13 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
1792 * configure: Regenerate.
1794 2011-02-13 Mike Frysinger <vapier@gentoo.org>
1796 * config/bfin-lex.l (BYTEOP2M): Remove tokenization.
1797 * config/bfin-parse.y (BYTEOP2M): Delete token.
1798 (asm_1): Remove BYTEOP2M insn matching.
1800 2011-02-12 Mike Frysinger <vapier@gentoo.org>
1802 * config/bfin-defs.h: Include opcode/bfin.h.
1803 (M_S2RND, M_T, M_W32, M_FU, M_TFU, M_IS, M_ISS2, M_IH, M_IU): Delete.
1805 2011-02-11 Mike Frysinger <vapier@gentoo.org>
1807 * doc/c-bfin.texi (Instruction Delimiting): Fix occur typo.
1808 (Modify Registers): Fix subtracted typo.
1809 (.byte2): Extend and swap descriptions with .byte4.
1810 (.byte4): Extend and swap descriptions with .byte2.
1811 (.db, .dw, .dd): Document behavior.
1813 2011-02-11 Mike Frysinger <vapier@gentoo.org>
1815 * config/bfin-parse.y (TESTSET): Reject REG_SP and REG_FP.
1817 2011-02-11 Alan Modra <amodra@gmail.com>
1819 * doc/c-ppc.texi (PowerPC-Opts <-nops>): Clarify.
1821 2011-02-10 Alan Modra <amodra@gmail.com>
1823 * doc/as.texinfo (Overview): Add missing markup around Blackfin
1824 and PowerPC options.
1826 2011-02-10 Alan Modra <amodra@gmail.com>
1828 * config/tc-ppc.c (md_show_usage): Remove -l and -b. Add -K PIC.
1829 * doc/as.texinfo: Refer to and include c-ppc.texi for PowerPC options.
1830 (Overview <Target PowerPC options>): Add a number of missing options.
1831 * doc/c-ppc.texi: Likewise. Add markup for use in manpage generation.
1833 2011-02-08 H.J. Lu <hongjiu.lu@intel.com>
1836 * config/tc-i386.c (i386_align_code): Use f32_patt when tuning
1839 2011-02-08 H.J. Lu <hongjiu.lu@intel.com>
1841 * config/tc-i386.c (set_cpu_arch): Also update cpu_arch_isa_flags
1843 (md_parse_option): Likewise.
1845 2011-02-04 Bernd Schmidt <bernds@codesourcery.com>
1847 * doc/as.texinfo (Target TIC6X options): Don't mention "-matomic".
1848 * doc/c-tic6x.texi (TIC6X Directives): Don't mention ".atomic".
1849 (TIC6X Options): Don't mention "-matomic".
1850 * config/tc-tic6x.c (OPTION_MATOMIC, OPTION_MNO_ATOMIC): Delete.
1851 (md_longopts): Remove corresponding entries.
1852 (md_parse_option): Don't handle them.
1853 (md_show_usage): Don't document them.
1854 (tic6x_atomic): Delete variable.
1855 (tic6x_update_features): Always copy tic6x_arch_enable to
1857 (tic6x_arch_enable): Remove references to TIC6X_INSN_ATOMIC.
1858 (s_tic6x_atomic, s_tic6x_noatomic): Remove functions.
1859 (md_pseudo_table): Remove ".atomic" and ".noatomic".
1861 2011-01-31 Nick Clifton <nickc@redhat.com>
1863 * write.c (write_contents): Include output file name and bfd error
1864 value when reporting the inability to write to the output file.
1865 * config/tc-rx.c (rx_handle_align): Do not insert NOPs into align
1866 frag that has a non-zero fill value.
1868 2011-01-27 DJ Delorie <dj@redhat.com>
1870 * config/tc-rx.c (md_convert_frag): If we can't compute the target
1871 address, zero out the values stored in the object file to make
1872 objdump's output consistent.
1874 2011-01-26 Kai Tietz <kai.tietz@onevision.com>
1876 * config/tc-i386.c (md_begin): Set for x64 windows COFF target
1877 x86_dwarf2_return_column to 32.
1879 2011-01-20 Nick Clifton <nickc@redhat.com>
1882 * config/tc-h8300.c (constant_fits_width_p): Use correct type for
1885 2011-01-18 H.J. Lu <hongjiu.lu@intel.com>
1887 * write.c (compress_debug): Return if section size is smaller
1890 2011-01-18 H.J. Lu <hongjiu.lu@intel.com>
1893 * write.c (compress_debug): Return if section size is 0.
1895 2011-01-18 Mingfeng Wu <mingfeng@faraday-tech.com>
1897 * config/tc-arm.c (arm_cpus): Add Faraday ARMv5TE compatible
1898 cores: fa606te, fa616te, fmp626. Modify the VFP of fa626te.
1899 * doc/c-arm.texi (ARM Options): Add -mcpu={fa606te, fa616te,
1902 2011-01-18 Nick Clifton <nickc@redhat.com>
1905 * doc/all.texi: Add NS32K
1906 * doc/as.texinfo: Remove target specific details of which
1907 characters act as comment initiators and statement separators into
1908 individual target specific files.
1909 * doc/c-alpha.texi (Alpha-Chars): Document special behaviour of
1910 the hash character at the start of a line.
1911 * doc/c-arm.texi (ARM-Chars): Likewise.
1912 * doc/c-avr.texi (AVR-Chars): Likewise.
1913 * doc/c-d10v.texi (D10V-Chars): Likewise.
1914 * doc/c-d30v.texi (D30V-Chars): Likewise.
1915 * doc/c-mmix.texi (MMIX-Chars): Likewise.
1916 * doc/c-s390.texi (s390 characters): Likewise.
1917 * doc/c-sh.texi (SH-Chars): Likewise.
1918 * doc/c-sh64.texi (SH64-Chars): Likewise.
1919 * doc/c-sparc.texi (SPARC-Chars): Likewise.
1920 * doc/c-tic6x.texi (TIC6X Syntax): Likewise.
1921 * doc/c-xtensa.texi (Xtensa Syntax): Likewise.
1922 * doc/c-z80.texi (Z80-Chars): Likewise.
1923 * doc/c-z8k.texi (Z8000-Chars): Likewise.
1924 * doc/c-pdp11.texi (PDP11-Syntax): Document line separator character.
1925 * doc/c-arc.texi (ARC-Chars): Fill in this subsection.
1926 * doc/c-bfin.texi (Blackfin Syntax): Document line comment and
1927 line separator characters.
1928 * doc/c-cr16.texi (CR16 Syntax): Likewise.
1929 * doc/c-i386.texi (i386-Chars): Likewise.
1930 * doc/c-i860.texi (i860-Chars): Likewise.
1931 * doc/c-i960.texi (i960-Chars): Likewise.
1932 * doc/c-ip2k.texi (IP2K-Chars): Likewise.
1933 * doc/c-lm32.texi (LM32-Chars): likewise.
1934 * doc/c-m32c.texi (M32C-Chars): Likewise.
1935 * doc/c-m68hc11.texi (M68HC11-syntax): Likewise.
1936 * doc/c-m68k.texi (M68K-Chars): Likewise.
1937 * doc/c-microblaze.texi (MicroBlaze-Chars): Likewise.
1938 * doc/c-msp430.texi (MSP430-Chars): Likewise.
1939 * doc/c-mt.texi (MT-Chars): Likewise.
1940 * doc/c-ns32k.texi (NS32K-Chars): Likewise.
1941 * doc/c-pj.texi (PJ-Chars): Likewise.
1942 * doc/c-ppc.texi (PowerPC-Chars): Likewise.
1943 * doc/c-rx.texi (RX-Chars): Likewise.
1944 * doc/c-score.texi (SCORE-Chars): Likewise.
1945 * doc/c-tic54x.texi (TIC54X-Chars): Likewise.
1946 * doc/c-v850.texi (V850-Chars): Likewise.
1947 * doc/c-vax.texi (VAX-Chars): Likewise.
1948 * doc/c-xc16x.texi (xc16x-Chars): Likewise.
1950 2011-01-17 Quentin Neill <quentin.neill@amd.com>
1952 * config/tc-i386.c (cpu_arch): Add CPU_TBM_FLAGS.
1954 * doc/c-i386.texi (i386-TBM): New section.
1956 2011-01-16 H.J. Lu <hongjiu.lu@intel.com>
1958 * config/tc-i386.c (disallow_64bit_disp): Renamed to ...
1959 (disallow_64bit_reloc): This.
1960 (md_assemble): Don't check movabs for x32 mode here.
1961 (i386_target_format): Updated.
1962 (tc_gen_reloc): Check if 64bit relocations are allowed.
1964 2011-01-15 H.J. Lu <hongjiu.lu@intel.com>
1966 * config/tc-i386.c (disallow_64bit_disp): New.
1967 (x86_elf_abi): Replace X86_64_LP64_ABI/X86_64_ILP32_ABI with
1968 X86_64_ABI/X86_64_X32_ABI.
1969 (md_assemble): Don't allow movabs with relocation in x32 mode.
1970 (i386_target_format): Updated.
1972 2011-01-14 H.J. Lu <hongjiu.lu@intel.com>
1974 * config/tc-i386.c (OPTION_N32): Renamed to ...
1976 (md_longopts): Replace n32 with x32.
1977 (md_parse_option): Updated.
1978 (md_show_usage): Likewise.
1980 * doc/c-i386.texi: Replace --n32 with --x32.
1982 2011-01-11 Mingjie Xing <mingjie.xing@gmail.com>
1984 * config/tc-mips.c (mips_ip): Update error messages. Take an
1985 unadjusted offset for "+c" argument.
1987 2011-01-10 Nick Clifton <nickc@redhat.com>
1989 * config/tc-i386.c (x86_elf_abi): Only define for targets that use
1992 2011-01-10 Nick Clifton <nickc@redhat.com>
1994 * config/tc-arm.c (s_arm_tls_desceq): Move code into ELF-only
1997 2011-01-10 Nathan Sidwell <nathan@codesourcery.com>
1998 Glauber de Oliveira Costa <glommer@gmail.com>
2000 * doc/c-arm.texi: Document TLSDESC and TLSCALL relocations, and
2001 .tlsdescseq directive.
2002 * config/tc-arm.c (arm_typed_reg_parse): Check for potential reloc
2004 (s_arm_tls_descseq): New directive.
2005 (md_pseudo_table): Add it.
2006 (encode_branch): Allow TLS_CALL relocs too.
2007 (do_t_blx, do_t_branch23): Use encode_branch.
2008 (reloc_names): Add tlsdesc and tlscall.
2009 (md_apply_fix): Process tls desc relocations.
2010 (tc_gen_reloc): Likewise.
2011 (arm_fix_adjustable): Likewise.
2013 2011-01-07 Quentin Neill <quentin.neill@amd.com>
2015 * config/tc-i386.c (cpu_arch): Add CPU_BMI_FLAGS.
2017 * doc/c-i386.texi (i386-BMI): New section.
2019 2011-01-06 Paul Koning <ni1d@arrl.net>
2021 * config/tc-pdp11.c (parse_op_no_deferred): Allow PC-relative
2022 references to absolute addresses.
2024 2011-01-05 DJ Delorie <dj@redhat.com>
2026 * config/tc-rx.c (tc_gen_reloc): Emit an RX_OP_NEG expression
2027 instead of an RH_NEG32 one.
2029 2011-01-05 Jonathan Wakely <jwakely.gcc@gmail.com>
2031 * doc/c-i386.texi: Clarify --n32.
2033 2011-01-04 H.J. Lu <hongjiu.lu@intel.com>
2035 * config/tc-i386.c (build_modrm_byte): Allow encoding 32/64bit
2036 integer registers in VEX.vvvv. Check register-only source
2037 operand when two source operands are swapped. Properly update
2038 destination when two source operands are swapped.
2040 2011-01-01 H.J. Lu <hongjiu.lu@intel.com>
2042 * gas.c (parse_args): Update copyright to 2011.
2044 For older changes see ChangeLog-2010
2050 version-control: never