1 2004-03-30 Nick Clifton <nickc@redhat.com>
3 * config/tc-arm.c (meabi_flags): Make its use conditional upon
6 2004-03-27 Alan Modra <amodra@bigpond.net.au>
8 * config/obj-aout.c (obj_aout_type): Remove #ifdef BFD_ASSEMBLER code.
10 2004-03-23 Paul Brook <paul@codesourcery.com>
12 * config/tc-arm.c (meabi_flags): New variable.
13 (arm_parse_eabi): New function.
14 (md_begin): Set flags for EABI v3.
16 (arm_long_opts): Add meabi.
17 * doc/as.texinf <ARM>: Document -meabi.
18 * doc/c-arm.texi: Ditto.
20 2004-03-22 Bob Wilson <bob.wilson@acm.org>
22 * config/tc-xtensa.c (xtensa_post_relax_hook): Create literal
23 tables even when use_literal_section flag is not set.
25 2004-03-22 Alan Modra <amodra@bigpond.net.au>
27 * config/tc-sh.c: Remove trailing whitespace.
29 2004-03-22 Hans-Peter Nilsson <hp@axis.com>
31 * doc/c-cris.texi (CRIS-Opts): Document --no-mul-bug-abort,
32 --mul-bug-abort and the default behavior.
33 * config/tc-cris.c (cris_insn_kind): New member CRIS_INSN_MUL.
34 (err_for_dangerous_mul_placement): New variable.
35 (STATE_MUL, OPTION_MULBUG_ABORT_ON, OPTION_MULBUG_ABORT_OFF): New
37 (md_cris_relax_table): Have placeholder for STATE_MUL.
38 (md_longopts): New options --mul-bug-abort and --no-mul-bug-abort.
39 (cris_relax_frag) <case ENCODE_RELAX (STATE_MUL, STATE_BYTE)>: New
41 (md_estimate_size_before_relax) <case ENCODE_RELAX (STATE_MUL,
43 (md_convert_frag) <ENCODE_RELAX (STATE_MUL, STATE_BYTE)>: Check
44 alignment and position of this frag, emit error message if
46 (md_assemble): For a multiply insn and when checking it,
47 transform the current frag into a special frag for that purpose.
48 (md_parse_option) <case OPTION_MULBUG_ABORT_OFF, case
49 OPTION_MULBUG_ABORT_ON>: Handle new options.
51 2004-03-19 Bob Wilson <bob.wilson@acm.org>
53 * config/tc-xtensa.c (mark_literal_frags): New function.
54 (xtensa_move_literals): Call mark_literal_frags for all literal
55 segments, including init and fini literal segments.
56 (xtensa_post_relax_hook): Swap use of xt_insn_sec and xt_literal_sec.
58 2004-03-19 John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
60 * tc-hppa.c (cons_fix_new_hppa): Check for PC relative base type.
61 (pa_comm): Set BSF_OBJECT in symbol flags.
63 2004-03-19 Alan Modra <amodra@bigpond.net.au>
65 * Makefile.am: Run "make dep-am".
66 * Makefile.in: Regenerate.
67 * doc/Makefile.in: Regenerate.
68 * config.in: Regenerate.
69 * po/gas.pot: Regenerate.
71 2004-03-18 Nathan Sidwell <nathan@codesourcery.com>
73 * read.c (read_a_source_file): Use demand_empty_rest_of_line.
74 (demand_empty_rest_of_line): Issue an error here.
75 (ignore_rest_of_line): Silently skip to end.
76 (demand_copy_string): Issue an error, not warning.
78 * config/obj-elf.c (obj_elf_section_name): Likewise.
79 (obj_elf_section): Likewise.
80 * config/tc-arc.c (arc_extoper): Remove bogus NULL checks.
81 (arc_extinst): Likewise.
82 * config/tc-ia64.c (dot_saveb): Use demand_empty_rest_of_line.
83 (dot_spill): Likewise.
84 (dot_unwabi): Likewise.
85 (dot_prologue): Likewise.
87 * expr.c (operand): Reject ++ and --.
90 2004-03-17 Kaz Kojima <kkojima@rr.iij4u.or.jp>
92 * config/tc-sh.c: Include dw2gencfi.h.
93 (sh_cfi_frame_initial_instructions): New function.
94 (sh_regname_to_dw2regnum): Likewise.
95 * config/tc-sh.h (DWARF2_LINE_MIN_INSN_LENGTH): Move to the end of
97 (TARGET_USE_CFIPOP): Define.
98 (tc_cfi_frame_initial_instructions): Likewise.
99 (tc_regname_to_dw2regnum): Likewise.
100 (DWARF2_DEFAULT_RETURN_COLUMN, DWARF2_CIE_DATA_ALIGNMENT): Likewise.
101 * Makefile.am: Update dependencies.
102 * Makefile.in: Regenerate.
104 2004-03-17 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
106 * configure.in: Switch sh-*-rtems* to ELF. Add sh-*-rtemscoff*.
107 * configure: Regenerate.
109 2004-03-12 Bob Wilson <bob.wilson@acm.org>
111 * read.c (s_leb128): Call md_flush_pending_output.
113 2004-03-12 Michal Ludvig <mludvig@suse.cz>
115 * config/tc-i386.c (output_insn): Handle PadLock instructions.
116 * config/tc-i386.h (CpuPadLock): New define.
117 (CpuUnknownFlags): Added CpuPadLock.
119 2004-03-07 Andreas Schwab <schwab@suse.de>
121 * doc/c-hppa.texi (HPPA Directives): Fix typo.
123 2004-03-07 Richard Henderson <rth@redhat.com>
125 * dw2gencfi.c (output_cie): Align length to 4 byte boundary.
126 (cfi_finish): Likewise for fde.
128 2004-03-05 H.J. Lu <hongjiu.lu@intel.com>
130 * config/tc-ia64.c (md_assemble): Properly handle NULL
132 (ia64_handle_align): Don't abort if failed to add a stop bit.
134 2004-03-04 H.J. Lu <hongjiu.lu@intel.com>
136 * Makefile.in: Regenerated.
137 * aclocal.m4: Likewise.
138 * configure: Likewise.
139 * doc/Makefile.in: Likewise.
141 2004-03-03 H.J. Lu <hongjiu.lu@intel.com>
143 * config/tc-ia64.c (dot_align): New.
144 (ia64_do_align): Make it static.
145 (md_pseudo_table): Use "dot_align" for "align".
146 (ia64_md_do_align): Don't set align_frag here.
147 (ia64_handle_align): Add a stop bit to the previous bundle if
150 * config/tc-ia64.h (ia64_do_align): Removed.
152 2003-03-03 Andrew Stubbs <andrew.stubbs@superh.com>
154 * config/tc-sh.c (md_parse_option): Add -isa=sh4-nofpu and
155 -isa=sh4-nommu-nofpu options. Adjust help messages accordingly.
156 (sh_elf_final_processing): Output BFD type sh4_nofpu if that is
157 the most general type or the user specifically requested it.
158 (md_assemble): Add a new error message for when an instruction
159 is understood, but is not allowed due to an -isa option.
161 2004-03-02 H.J. Lu <hongjiu.lu@intel.com>
163 * config/tc-ia64.c (align_frag): New.
164 (md_assemble): Set the tc_frag_data field in align_frag for
165 IA64_OPCODE_FIRST instructions.
166 (ia64_md_do_align): Set align_frag.
167 (ia64_handle_align): Add a stop bit if needed.
169 * config/tc-ia64.h (TC_FRAG_TYPE): New.
172 2004-03-01 Richard Sandiford <rsandifo@redhat.com>
174 * config/tc-frv.c (fr400_audio): New variable.
175 (md_parse_option, md_show_usage): Add -mcpu=fr405 and -mcpu=fr450.
176 (md_parse_option): Set fr400_audio for -mcpu=fr400 and -mcpu=fr405.
177 (target_implements_insn_p): New function.
178 (md_assemble): Report an error if the processor doesn't implement
181 2004-02-27 Kazuhiro Inaoka <inaoka.kazuhiro@renesas.com>
183 * config/tc-m32r.c (md_longopts): Added -no-bitinst option.
184 (md_parse_option): Ditto.
185 (OPTION_NO_SPECIAL_M32R): Added.
186 (md_show_usage): Document it.
187 (enable_speial_m32r): Changed a default value from 0 to 1.
188 * doc/c-m32r.texi: Document the -no-bitinst option.
190 2004-02-27 Nick Clifton <nickc@redhat.com>
192 * config/tc-sh.c (get_operand): Revert previous delta.
193 (tc_gen_reloc): Check for an unknown reloc type before processing
196 2004-02-27 Hannes Reinecke <hare@suse.de>
198 * config/tc-s390.c (s390_insn): Correct range check for opcode in
199 .insn pseudo operation.
201 2004-02-27 Anil Paranjpe <anilp1@kpitcummins.com>
203 * config/tc-sh.c (get_operand): In case of #Imm, check has been
204 added for wrong syntax.
206 2004-02-26 Eric Christopher <echristo@redhat.com>
208 * config/tc-mips.c (mips_dwarf2_addr_size): New.
209 * config/tc-mips.h (DWARF2_ADDR_SIZE): Use.
211 2004-02-26 Andrew Stubbs <andrew.stubbs@superh.com>
213 * config/tc-sh.c (build_Mytes): Add REG_N_D and REG_N_B01
214 nibble types to assembler.
216 2004-02-25 Fred Fish <fnf@redhat.com>
218 * config/tc-iq2000.c: Add missing \n\ in multiline string literal.
220 2004-02-20 James E Wilson <wilson@specifixinc.com>
222 * config/tc-ia64.c (slot_index): New arg before_relax. Use instead of
224 (fixup_unw_records): New arg before_relax. Pass to slot_index.
225 (ia64_estimate_size_before_relax): New.
226 (ia64_convert_frag): Pass 0 to fixup_unw_records. Add comment.
227 (generate_unwind_image): Pass 1 to fixup_unw_records.
228 * config/tc-ia64.h (ia64_estimate_size_before_relax): Declare.
229 (md_estimate_size_before_relax): Call ia64_estimate_size_before_relax.
231 2004-02-19 Jakub Jelinek <jakub@redhat.com>
233 * stabs.c (generate_asm_file): Avoid warning about use of
234 uninitialized variable.
236 2004-02-18 David Mosberger <davidm@hpl.hp.com>
238 * config/tc-ia64.c (ia64_flush_insns): In addition to prologue,
239 body, and endp, allow unwind records which do not have a "t"
240 (time/instruction) field.
242 2004-02-17 Petko Manolov <petkan@nucleusys.com>
244 * config/tc-arm.c (do_mav_dspsc_1): Correct offset of CRn.
245 (do_mav_dspsc_2): Likewise.
246 Fix accumulator registers move opcodes.
248 2004-02-13 Hannes Reinecke <hare@suse.de>
249 Jakub Jelinek <jakub@redhat.com>
251 * dwarf2dbg.c (get_filenum): Do not read beyond allocated memory.
253 2004-02-10 Steve Ellcey <sje@cup.hp.com>
255 * config/tc-ia64.h (ia64_frob_symbol): New declaration.
256 (tc_frob_symbol): New macro definition.
257 * config/tc-ia64.c (ia64_frob_symbol): New routine.
259 2004-02-09 Daniel Jacobowitz <drow@mvista.com>
261 * config/tc-arm.c (md_begin): Mark .note.gnu.arm.ident as
264 2004-02-09 Nathan Sidwell <nathan@codesourcery.com>
266 * read.h (IGNORE_OPCODE_CASE): Do not define. Replace with ...
267 (TC_CASE_SENSITIVE): ... this.
268 * read.c: Replace IGNORE_OPCODE_CASE with TC_CASE_SENSITIVE.
269 * doc/internals.texi (TC_CASE_SENSITIVE): Document.
271 2004-02-06 James E Wilson <wilson@specifixinc.com>
273 * config/tc-ia64.c (dot_endp): Delete call to output_endp.
274 (generate_unwind_image): Re-add it here.
276 2004-02-06 Nathan Sidwell <nathan@codesourcery.com>
278 * dwarf2dbg.c (DWARF2_ADDR_SIZE): Remove trailing ';'
279 * read.h (SKIP_WHITESPACE): Turn into an expression.
280 * read.c (read_a_source_file): A pseudo is removed by having a
283 2004-02-05 James E Wilson <wilson@specifixinc.com>
285 * config/tc-ia64.c (output_endp): New.
286 (count_bits): Delete.
287 (ia64_flush_insns, process_one_record, optimize_unw_records): Handle
289 (fixup_unw_records): Handle endp unwind records. Delete code for
290 shortening prologue regions not followed by a body record.
291 (dot_endp): Call add_unwind_entry to emit endp unwind record.
292 * config/tc-ia64.h (unw_record_type): Add endp.
294 2004-02-03 James E Wilson <wilson@specifixinc.com>
296 * config/tc-ia64.c (ia64_convert_frag): Call md_number_to_chars to
297 fill padding bytes with zeroes.
298 (emit_one_bundle): New locals last_ptr, end_ptr. Rewrite code that
299 sets unwind_record slot_number and slot_frag fields.
301 2004-02-02 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
303 * config/tc-mips.c (add_got_offset_hilo): New function.
304 (macro): Use load_register() and add_got_offset_hilo() to load
305 constants instead of hardcoding code sequences throughout.
307 2004-01-28 H.J. Lu <hongjiu.lu@intel.com>
309 * config/tc-ia64.c (emit_one_bundle): Add proper indentation.
311 2004-01-26 Bernardo Innocenti <bernie@develer.com>
313 * config/tc-m68k.h (EXTERN_FORCE_RELOC): Handle m68k-uclinux specially,
315 * config/tc-m68k.c (RELAXABLE_SYMBOL): Use EXTERN_FORCE_RELOC instead
316 of hard-coded test for TARGET_OS=elf.
318 2004-01-24 Chris Demetriou <cgd@broadcom.com>
320 * config/tc-mips.c (hilo_interlocks): Change definition
321 so that MIPS32, MIPS64 and later ISAs are included, along with
322 the already-included machines. Update comments.
324 2004-01-23 Daniel Jacobowitz <drow@mvista.com>
326 * config/tc-arm.c (tc_gen_reloc): Improve error message for
327 undefined local labels.
329 2004-01-23 Richard Sandiford <rsandifo@redhat.com>
331 * config/tc-mips.c (load_address, macro): Update comments about
332 NewABI GP relaxation.
334 2004-01-23 Richard Sandiford <rsandifo@redhat.com>
336 * config/tc-mips.c (macro_build): Remove place and counter arguments.
337 (mips_build_lui, macro_build_ldst_constoffset): Likewise.
338 (mips16_macro_build, macro_build_jalr): Remove counter argument.
339 (set_at, load_register, load_address, move_register): Likewise.
340 (load_got_offset, add_got_offset): Likewise.
341 Update all calls and tidy accordingly.
343 2004-01-23 Richard Sandiford <rsandifo@redhat.com>
345 * config/tc-mips.c (RELAX_ENCODE): Remove WARN argument.
346 (RELAX_FIRST, RELAX_SECOND): Turn into 8-bit quantities.
347 (RELAX_USE_SECOND): Bump to 0x10000.
348 (RELAX_SECOND_LONGER, RELAX_NOMACRO, RELAX_DELAY_SLOT): New flags.
349 (mips_macro_warning): New variable.
350 (md_assemble): Wrap macro expansion in macro_start() and macro_end().
351 (s_cpload, s_cpsetup, s_cprestore, s_cpreturn): Likewise.
352 (relax_close_frag): Set mips_macro_warning.first_frag. Adjust use
354 (append_insn): Update mips_macro_warning.sizes.
355 (macro_start, macro_warning, macro_end): New functions.
356 (macro_build): Don't emit warnings here.
357 (macro_build_lui, md_estimate_size_before_relax): ...or here.
358 (md_convert_frag): Check for cases where one macro alternative
359 needs a warning and the other doesn't. Emit a warning if the
360 longer sequence was chosen.
362 2004-01-23 Richard Sandiford <rsandifo@redhat.com>
364 * config/tc-mips.h (tc_frag_data_type, TC_FRAG_TYPE): Remove.
365 * config/tc-mips.c (RELAX_ENCODE): Take three arguments: the size of
366 the first sequence, the size of the second sequence, and a flag
367 that says whether we should warn.
368 (RELAX_OLD, RELAX_NEW, RELAX_RELOC[123]): Delete.
369 (RELAX_FIRST, RELAX_SECOND): New.
370 (mips_relax): New variable.
371 (relax_close_frag, relax_start, relax_switch, relax_end): New fns.
372 (append_insn): Remove "place" argument. Use mips_relax.sequence
373 rather than "place" to check whether we're expanding the second
374 alternative of a relaxable macro. Remove redundant check for
375 branch relaxation. If generating a normal insn, and there
376 is not enough room in the current frag, call relax_close_frag()
377 to close it. Update mips_relax.sizes[]. Emit fixups for the
378 second version of a relaxable macro. Record the first relaxable
379 fixup in mips_relax. Remove tc_gen_reloc workaround.
380 (macro_build): Remove all uses of "place". Use mips_relax.sequence
381 in the same way as in append_insn.
382 (mips16_macro_build): Remove "place" argument.
383 (macro_build_lui): As for macro_build. Don't drop the add_symbol
384 when generating the second version of a relaxable macro.
385 (load_got_offset, add_got_offset): New functions.
386 (load_address, macro): Use new relaxation machinery. Remove
387 tc_gen_reloc workarounds.
388 (md_estimate_size_before_relax): Set RELAX_USE_SECOND if the second
389 version of a relaxable macro is needed. Return -RELAX_SECOND if the
390 first version is needed.
391 (tc_gen_reloc): Remove relaxation handling.
392 (md_convert_frag): Go through the fixups for a relaxable macro and
393 mark those that belong to the unneeded alternative as done. If the
394 second alternative is needed, adjust the fixup addresses to account
395 for the deleted first alternative.
397 2004-01-23 Richard Sandiford <rsandifo@redhat.com>
399 * frags.h (frag_room): Declare.
400 * frags.c (frag_room): New function.
401 * doc/internals.texi: Document it.
403 2004-01-22 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
405 * config/tc-mips.c (append_insn): Don't do r3900 interlock
406 optimization for -mtune=r3900, as this will break on other CPUs.
408 2004-01-11 Tom Rix <tcrix@worldnet.att.net>
410 * config/tc-m68hc11.c (build_indexed_byte): movb and movw cannot
411 be relaxed, use fixup.
412 (md_apply_fix3): Use 5 bit reloc from movb and movw fixup.
414 2004-01-19 Jakub Jelinek <jakub@redhat.com>
416 * config/tc-sparc.c (sparc_ip): Disallow %f32-%f63 for single
419 2004-01-14 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
421 * config/tc-mips.c (append_insn): Properly detect variant frags
422 that preclude swapping of relaxed branches. Correctly swap
423 instructions between frags when dealing with relaxed branches.
425 2004-01-14 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
427 * acinclude.m4: Quote names of macros to be defined by AC_DEFUN
429 * aclocal.m4: Regenerate.
430 * configure: Regenerate.
432 2004-01-12 Anil Paranjpe <anilp1@KPITCummins.com>
434 * config/tc-h8300.c (build_bytes): Apply relaxation to bit
437 2004-01-12 Richard Sandiford <rsandifo@redhat.com>
439 * config/tc-mips.c (macro_build_jalr): When adding an R_MIPS_JALR
440 reloc, reserve space for the delay slot as well as the jalr itself.
442 2004-01-09 Paul Brook <paul@codesourcery.com>
444 * config/tc-arm.c (do_vfp_reg2_from_sp2): Rename from do_vfp_sp_reg2.
445 (do_vfp_sp2_from_reg2): New function.
447 (do_vfp_dp_from_reg2): Check return values properly.
449 2004-01-08 Ian Lance Taylor <ian@wasabisystems.com>
451 * config/tc-mips.c (warn_nops): Remove static variable.
452 (macro): Remove test of warn_nops.
453 (md_shortops): Remove 'n'.
454 (md_parse_option): Remove 'n' case.
455 (md_show_usage): Remove -n.
456 * doc/as.texinfo (Overview): Remove MIPS -n option.
457 * doc/c-mips.texi (MIPS Opts): Remove mention -n.
458 * NEWS: Mention removal of MIPS -n option.
460 * config/tc-mips.c (ISA_HAS_COPROC_DELAYS): Remove.
461 (cop_interlocks): Check ISA level.
462 (cop_mem_interlocks): Define.
463 (reg_needs_delay): Check cop_interlocks rather than
464 ISA_HAS_COPROC_DELAYS.
465 (append_insn): Likewise. Use cop_mem_interlocks rather than
466 directly checking mips_opts.isa.
467 (mips_emit_delays): Likewise.
469 2004-01-07 H.J. Lu <hongjiu.lu@intel.com>
471 * config/tc-ia64.c (unwind): Move next_slot_number and
472 next_slot_frag to ...
473 (unw_rec_list): Here.
474 (free_list_records): Removed.
475 (output_unw_records): Likewise.
476 (generate_unwind_image): Make it void.
477 (alloc_record): Initialize next_slot_number and next_slot_frag.
478 (slot_index): Take .org, .space and .align into account.
479 (fixup_unw_records): Don't set slot_number to 0. Use
480 list->next_slot_number and list->next_slot_frag instead of
481 unwind.next_slot_number and unwind.next_slot_frag.
482 (ia64_convert_frag): New.
483 (generate_unwind_image): Generate a rs_machine_dependent frag
485 (emit_one_bundle): Use list->next_slot_number and
486 list->next_slot_frag instead of unwind.next_slot_number and
487 unwind.next_slot_frag.
489 * config/tc-ia64.h (md_convert_frag): Defined as
491 (md_estimate_size_before_relax): Defined as (f)->fr_var.
493 2004-01-06 Alexandre Oliva <aoliva@redhat.com>
495 2003-12-19 Alexandre Oliva <aoliva@redhat.com>
496 * config/tc-frv.h (md_apply_fix3): Don't define.
497 * config/tc-frv.c (md_apply_fix3): New. Shift/truncate %hi/%lo
499 * config/tc-frv.h (TC_FORCE_RELOCATION_SUB_LOCAL): Define.
500 2003-10-07 Alexandre Oliva <aoliva@redhat.com>
501 * config/tc-frv.c (line_separator_chars): Add `!'.
502 2003-09-19 Alexandre Oliva <aoliva@redhat.com>
503 * config/tc-frv.c (md_assemble): Clear insn upfront.
504 2003-09-18 Alexandre Oliva <aoliva@redhat.com>
505 * config/tc-frv.c (OPTION_FDPIC): New macro.
506 (md_longopts): Add mfdpic.
507 (md_parse_option): Handle it.
508 2003-08-04 Alexandre Oliva <aoliva@redhat.com>
509 * config/tc-frv.c (md_cgen_lookup_reloc) <FRV_OPERAND_D12,
510 FRV_OPERAND_S12>: Use reloc type encoded in fix-up.
511 (frv_pic_ptr): Parse funcdesc.
513 2004-01-05 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
515 * doc/as.texinfo: Let texi2pod parse asconfig.texi and
516 gasver.texi. Remove duplicate symbol definitions for texi2pod.
518 2004-01-05 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
520 * Makefile.am (Makefile): Move the dependency on
521 $(BFDDIR)/configure.in to...
522 (CONFIG_STATUS_DEPENDENCIES): ... here.
523 (AUTOMAKE_OPTIONS): Require automake 1.8.
524 * Makefile.in: Regenerate.
525 * doc/Makefile.am (BASEDIR, BFDDIR): Define.
526 (CONFIG_STATUS_DEPENDENCIES): Add a dependency on
527 $(BFDDIR)/configure.in here as well.
528 * doc/Makefile.in: Regenerate.
530 2004-01-05 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
532 * Makefile.am (install, install-info, RECURSIVE_TARGETS): Remove.
533 * Makefile.in: Regenerate.
534 * aclocal.m4: Regenerate.
535 * doc/Makefile.am (install, install-info): Remove.
536 (install-data-local): A new hook for install-info.
537 (AUTOMAKE_OPTIONS): Require automake 1.8.
538 * doc/Makefile.in: Regenerate.
540 2004-01-02 Nutan Singh <nutan@kpitcummins.com>
542 * doc/c-sh.texi: Update description about floating point behavior
545 2004-01-02 Bernardo Innocenti <bernie@develer.com>
547 * configure.in: Add m68k-uClinux target.
548 * configure: Regenerate.
550 For older changes see ChangeLog-0203
556 version-control: never