gas/ChangeLog

   1 2007-10-11  Nick Clifton  <nickc@redhat.com>
   2
   3         PR gas/5155
   4         * config/tc-msp430.c: Fix spelling typos.
   5
   6 2007-10-11  Nick Clifton  <nickc@redhat.com>
   7
   8         * doc/as.texinfo (Type): Fix typo: STT_FUNC not STT_FUNCTION.
   9
  10 2007-10-08  Maciej W. Rozycki  <macro@linux-mips.org>
  11
  12         * config/tc-mips.c (AT): Rename to...
  13         (ATREG): ... this.
  14         (AT): New definition.
  15         (mips_set_options): Rename "noat" to "at"; change the type.
  16         (mips_opts): Update accordingly.
  17         (append_insn): Likewise.
  18         (macro_build_ldst_constoffset): Likewise.
  19         (load_address): Likewise.
  20         (macro, macro2): Likewise.
  21         (s_mipsset): Handle ".set at=REG".  Update handling of ".set at"
  22         and ".set noat".
  23
  24 2007-10-08  Nick Clifton  <nickc@redhat.com>
  25
  26         * doc/as.texinfo (Previous): Clarify explanation of the behaviour
  27         of this pseudo-op and add a couple of examples.
  28
  29 2007-10-08  Nick Clifton  <nickc@redhat.com>
  30
  31         PR gas/5121 gas/5122 gas/5123
  32         * Makefile.am (CFILES): Add cgen.c
  33         (TARGET_CPU_CFILES): Add tc-iq2000.c, tc-maxq.c, tc-mt.c,
  34         tc-tic4x.c and xtensa-relax.c.
  35         (TARGET_CPU_HFILES): Add tc-iq2000.h, tc-maxq.h, tc-mt.h,
  36         tc-tic4x.h and xtensa-relax.h.
  37         (TARG_ENV_HFILES): Remove te-aux.h, te-delta.h, te-delt88.h,
  38         te-ic960.h, te-linux.h.  Add te-aix5.h, te-armeabi.h,
  39         te-freebsd.h, te-gnu.h, te-interix.h, te-vxworks.h.
  40         (CONFIG_ATOF_CFILES): New variable.
  41         (POTFILES): Add CONFIG_ATOF_CFILES to dependencies.  Fix typo with
  42         dependency upon TARG_ENV_HFILES.
  43         (DEPTC): Do not put "#include opcodes/<foo>-desc.h" into
  44         cgen-desc.h when foo-desc.h does not exit.
  45         Run make dep-am.
  46         * Makefile.in: Regenerate.
  47         * doc/Makefile.in: Regenerate.
  48         * po/POTFILES.in: Regenerate.
  49         PR gas/5124 gas/5125
  50         * po/es.po: Regenerate.
  51         * po/fr.po: Regenerate.
  52         * po/gas.pot: Regenerate.
  53         * po/rw.po: Regenerate.
  54         * po/tr.po: Regenerate.
  55         * config/obj-elf.c (obj_elf_vtable_inherit): Allow for translation
  56         of error messages.
  57         PR gas/5126
  58         * config/obj-som.c: Likewise.
  59         PR gas/5129
  60         * config/tc-arc.c: Likewise.
  61         PR gas/5131 gas/5132
  62         * config/tc-arm.c: Likewise.
  63         PR gas/5137
  64         * config/tc-bfin.c: Likewise.
  65         PR gas/5143
  66         * config/tc-frv.c: Likewise.
  67         PR gas/5142
  68         * config/tc-dlx.c: Likewise.
  69
  70 2007-10-08  Eric B. Weddington  <eweddington@cso.atmel.com>
  71
  72         * config/tc-avr.c (mcu_types): Add new devices: ATtiny43U,
  73         ATtiny48, AT90PWM216, AT90PWM316.
  74         * doc/c-avr.texi: Document new devices.
  75
  76 2007-10-08  Nick Clifton  <nickc@redhat.com>
  77
  78         PR gas/5133
  79         * config/tc-arm.c (md_apply_fix): Correct error message.
  80         PR gas/5134
  81         * config/tc-arm.c (md_apply_fix): Likewise.
  82         PR gas/5136
  83         * config/tc-bfin.c (md_apply_fix): Fix error message.
  84         PR gas/5135
  85         (Expr_Node_Gen_Reloc_R): Fix spelling typos in error messages.
  86
  87 2007-10-05  H.J. Lu  <hongjiu.lu@intel.com>
  88
  89         * config/tc-i386.c (build_modrm_byte): Check the first 2 8bit
  90         immediate operands directly for instructions with 4 operands.
  91
  92 2007-10-04  H.J. Lu  <hongjiu.lu@intel.com>
  93
  94         PR gas/5109
  95         * config/tc-i386.c (process_suffix): Clear QWORD suffix if it
  96         is ignored in Intel mode.
  97
  98 2007-10-04  Helge Deller  <deller@gmx.de>
  99
 100         * read.c (potable): Add string8, string16, string32 and string64.
 101         Add bit size for stringer function.
 102         (stringer_append_char): New.
 103         (stringer): Use stringer_append_char().
 104         * config/obj-coff.c (obj_coff_ident): Add bit size for stringer function.
 105         * config/obj-elf.c (obj_elf_ident): Likewise.
 106         * config/tc-alpha.c (s_alpha_stringer): Likewise.
 107         * config/tc-dlx.c (dlx_pseudo_table): Likewise.
 108         * config/tc-hppa.c (pa_stringer): Likewise.
 109         * config/tc-ia64.c (md_pseudo_table, pseudo_opcode): Likewise.
 110         * config/tc-m68hc11.c (md_pseudo_table): Likewise.
 111         * config/tc-mcore.c (md_pseudo_table): Likewise.
 112         * config/tc-mips.c (mips_pseudo_table): Likewise.
 113         * config/tc-spu.c (md_pseudo_table): Likewise.
 114         * config/tc-s390.c (md_pseudo_table): Likewise. Replace '2' by '1'.
 115         * doc/as.texinfo (ABORT): Fix identing.
 116         (String): Document new string8, string16, string32, string64
 117         functions.
 118         * NEWS: Mention the new feature.
 119
 120 2007-10-03  Nick Clifton  <nickc@redhat.com>
 121
 122         PR gas/5078
 123         * config/tc-avr.c (avr_get_constant): Extend error message to
 124         mention that the constant must be positive.
 125
 126 2007-10-03  Nick Clifton  <nickc@redhat.com>
 127
 128         * config/tc-avr.c (avr_get_constant):
 129         PR gas/5089
 130         * config/tc-arm.c (s_arm_unwind_handlerdata): Fix spelling typo.
 131         PR gas/5090
 132         (md_assemble): Fix spelling typo.
 133
 134 2007-10-03  Alan Modra  <amodra@bigpond.net.au>
 135
 136         PR 4303
 137         * stabs.c (aout_process_stab): Set BSF_DEBUGGING.
 138
 139 2007-10-01  M R Swami Reddy <MR.Swami.Reddy@nsc.com>
 140
 141         * config/tc-cr16.c: Replaced 'tabs' with white spaces and
 142         added R_CR16_DISP8 as default reloc type for b<cc> instructions.
 143
 144 2007-09-30  H.J. Lu  <hongjiu.lu@intel.com>
 145
 146         PR gas/5080
 147         * config/tc-i386.c (check_long_reg): Also handle cvttss2si.
 148         (check_qword_reg): Also handle cvttsd2si.
 149
 150 2007-09-27  Kazu Hirata  <kazu@codesourcery.com>
 151
 152         * config/m68k-parse.h (m68k_register): Use MBO instead of MBB.
 153         (last_movec_reg): Change to MBO.
 154         * config/tc-m68k.c (fido_ctrl): Use MBO instead of MBB.
 155         (m68k_ip): Use MBO instead of MBO.
 156         (init_table): Use MBO instead of MBO.  Add an entry for mbo.
 157
 158 2007-09-26  Jan Beulich  <jbeulich@novell.com>
 159
 160         * config/tc-i386.c (build_modrm_byte): Also check for RegEip
 161         when considering IP-relative addressing.
 162
 163 2007-09-26  Jan Beulich  <jbeulich@novell.com>
 164
 165         * config/tc-i386.h (md_register_arithmetic): Define.
 166         * config/tc-ia64.h (md_register_arithmetic): Likewise.
 167         * doc/internals.texi: Document md_register_arithmetic.
 168         * expr.c (make_expr_symbol): Force O_register expressions into
 169         reg_section.
 170         (expr): Provide default for md_register_arithmetic. Don't resolve
 171         adding/subtracting constants to/from registers if
 172         md_register_arithmetic is zero.
 173
 174 2007-09-26  Jan Beulich  <jbeulich@novell.com>
 175
 176         * dw2gencfi.c: Conditionalize whole body upon TARGET_USE_CFIPOP.
 177         (cfi_finish): Add second empty instance.
 178
 179 2007-09-26  Jan Beulich  <jbeulich@novell.com>
 180
 181         * config/tc-ia64.c (dot_pred_rel): Replace specialized handling
 182         with simple call to parse_operand.
 183
 184 2007-09-26  Jan Beulich  <jbeulich@novell.com>
 185
 186         * config/tc-i386.c (NUM_FLAG_CODE): Remove.
 187
 188 2007-09-26  Jan Beulich  <jbeulich@novell.com>
 189
 190         * as.c (itbl_parse): Remove #define.
 191         (struct itbl_file_list): Move down and ...
 192         (itbl_files): .. conditionalize upon HAVE_ITBL_CPU.
 193         (show_usage): Conditionalize printing of --itbl option upon
 194         HAVE_ITBL_CPU.
 195         (parse_args): Conditionalize handling of -t/--itbl options upon
 196         HAVE_ITBL_CPU. Remove OPTION_INSTTBL and replace its use with
 197         't'.
 198
 199 2007-09-25  H.J. Lu  <hongjiu.lu@intel.com>
 200
 201         * config/tc-i386.c (output_insn): Use i.tm.opcode_length to
 202         check opcode length.
 203
 204 2007-09-25  Nathan Sidwell  <nathan@codesourcery.com>
 205
 206         * config/tc-m68k.c (LONG_BRANCH_VIA_COND): New.
 207         (BRANCHBWPL, FRAG_VAR_SIZE): New.
 208         (md_relax_table): Add BRANCHBWPL entries.
 209         (m68k_ip): Choose BRANCHBWPL relaxation if necessary.
 210         (md_assemble): Use FRAG_VAR_SIZE.
 211         (md_convert_frag_1): Add BRANCHBWPL cases.
 212         (md_estimate_size_before_relaz): Likewise.
 213
 214 2007-09-24  Carlos O'Donell  <carlos@codesourcery.com>
 215
 216         * config/tc-mips.c (s_align): Set max_alignment to 28.
 217
 218 2007-09-20  H.J. Lu  <hongjiu.lu@intel.com>
 219
 220         PR 658
 221         * config/tc-i386.c (SCALE1_WHEN_NO_INDEX): Removed.
 222         (set_allow_index_reg): New.
 223         (allow_index_reg): Likewise.
 224         (md_pseudo_table): Add "allow_index_reg" and
 225         "disallow_index_reg".
 226         (build_modrm_byte): Set i.sib.index to NO_INDEX_REGISTER for
 227         fake index registers.
 228         (i386_scale): Updated.
 229         (i386_index_check): Support fake index registers.
 230         (parse_real_register): Return NULL on eiz/riz if fake index
 231         registers aren't allowed.
 232
 233 2007-09-19  Nick Clifton  <nickc@redhat.com>
 234
 235         * config/tc-h8300.c (md_apply_fix): Do not abort or handle 8 byte
 236         fixups.
 237
 238 2007-09-19  Bob Wilson  <bob.wilson@acm.org>
 239
 240         * doc/c-xtensa.texi (Xtensa Immediate Relaxation): Fix "addi" typo.
 241
 242 2007-09-18  Bernd Schmidt  <bernd.schmidt@analog.com>
 243
 244         * config/bfin-parse.y (asm_1): Slightly improve error messages
 245         for "reg += const;".
 246
 247 2007-09-18  Alan Modra  <amodra@bigpond.net.au>
 248
 249         PR gas/5026
 250         * read.c (emit_expr): Only use long long if required and available.
 251
 252 2007-09-17  H.J. Lu  <hongjiu.lu@intel.com>
 253
 254         * config/tc-i386.c (baseindex): Removed.
 255         (build_modrm_byte): Check reg_num for RIP register instead of
 256         reg_type.
 257         (i386_index_check): Likewise.
 258
 259 2007-09-17  H.J. Lu  <hongjiu.lu@intel.com>
 260
 261         PR gas/5035
 262         * config/obj-coff.c (obj_coff_endef): Remove checking size of
 263         def_symbol_in_progress.
 264
 265 2007-09-17  Evandro Menezes  <evandro@yahoo.com>
 266
 267         PR gas/5026
 268         * read.c (emit_expr): Use unsigned long long values in warning
 269         message about truncated expressions.
 270
 271 2007-09-17  H.J. Lu  <hongjiu.lu@intel.com>
 272
 273         * config/tc-i386.c (intel_e04): Revert the last change.
 274
 275 2007-09-17  Nick Clifton  <nickc@redhat.com>
 276
 277         * po/es.po: Updated Spanish translation.
 278
 279 2007-09-15  H.J. Lu  <hongjiu.lu@intel.com>
 280
 281         PR gas/5034
 282         * config/tc-i386.c (intel_e04): Return 1 if cur_token.code is
 283         T_NIL.
 284
 285 2007-09-14  H.J. Lu  <hongjiu.lu@intel.com>
 286
 287         * config/tc-i386.c (build_modrm_byte): Adjust comment line
 288         wrap.
 289
 290 2007-09-14  H.J. Lu  <hongjiu.lu@intel.com>
 291
 292         * config/tc-i386.c (build_modrm_byte): Use (A || B) instead
 293         of (A || B) != 0.
 294
 295 2007-09-14  H.J. Lu  <hongjiu.lu@intel.com>
 296
 297         * config/tc-i386.c (build_modrm_byte): Adjust indentation.
 298
 299 2007-09-14  Michael Meissner  <michael.meissner@amd.com>
 300             Dwarakanath Rajagopal  <dwarak.rajagopal@amd.com>
 301             Tony Linthicum  <tony.linthicum@amd.com>
 302
 303         * NEWS: Add SSE5 support to NEWS file.
 304
 305         * config/tc-i386.h (drex_byte): Add fields to allow process_drex
 306         and build_modrm_byte to communicate.
 307         (DREX_OC0): New SSE5 macro.
 308         (DREX_OC0_MASK): Ditto.
 309         (DREX_OC1): Ditto.
 310         (DREX_OC1_MASK): Ditto.
 311         (DREX_XMEM_X1_X2_X2): Ditto.
 312         (DREX_X1_XMEM_X2_X2): Ditto.
 313         (DREX_X1_XMEM_X2_X1: Ditto.
 314         (DREX_X1_X2_XMEM_X1: Ditto.
 315         (DREX_XMEM_X1_X2): Ditto.
 316         (DREX_X1_XMEM_X2): Ditto.
 317         (drex_byte): New structure to describe the DREX byte.
 318
 319         * config/tc-i386.c (process_drex): New function to handle SSE5
 320         DREX bits.
 321         (build_modrm_byte): Use the information cached away in
 322         process_drex in the case of DREX instructions.
 323         (i386_insn): Add drex field.
 324         (pi): Add debugging of drex field.
 325         (md_assemble): Treat SSE5 like SSE3 in instructions with an
 326         immediate byte.  Move REX field to DREX if this is a DREX
 327         instruction.
 328         (process_operands): Add SSE5 support.
 329         (build_modrm_byte): Ditto.
 330         (output_insn): Ditto.
 331         (cpu_arch): Ditto.
 332         (i386_align_code): Ditto.
 333
 334 2007-09-12  Jan Beulich  <jbeulich@novell.com>
 335
 336         * config/tc-i386.c (md_assemble): Move handling of extrq/insertq
 337         after generic operand swapping, and swap only the immediate operands.
 338
 339 2007-09-11  Nathan Sidwell  <nathan@codesourcery.com>
 340
 341         * config/tc-m68k.c (m68k_ip): Add mcfisa_c case.
 342         (m68k_elf_final_processing): Add EF_M68K_CF_ISA_C_NODIV.
 343
 344 2007-09-09  H.J. Lu  <hongjiu.lu@intel.com>
 345
 346         * tc-i386.c (output_insn): Only check SSE4.2 and ABM for 3
 347         byte opcode.
 348
 349 2007-09-08  H.J. Lu  <hongjiu.lu@intel.com>
 350
 351         * config/tc-i386.c (cpu_flags_check_x64): Renamed to ...
 352         (cpu_flags_check_cpu64): This. Inline.
 353         (uints_all_zero): New.
 354         (uints_set): Likewise
 355         (uints_equal): Likewise
 356         (UINTS_ALL_ZERO): Likewise
 357         (UINTS_SET): Likewise
 358         (UINTS_CLEAR): Likewise
 359         (UINTS_EQUAL): Likewise
 360         (cpu_flags_and): Likewise.
 361         (cpu_flags_or): Likewise.
 362         (operand_type_and): Likewise.
 363         (operand_type_or): Likewise.
 364         (operand_type_xor): Likewise.
 365         (cpu_flags_not): Inline and use switch instead of loop.
 366         (cpu_flags_match): Updated.
 367         (operand_type_match): Likewise.
 368         (smallest_imm_type): Likewise.
 369         (set_cpu_arch): Likewise.
 370         (pt): Likewise.
 371         (md_assemble): Likewise.
 372         (parse_insn): Likewise.
 373         (optimize_imm): Likewise.
 374         (match_template): Likewise.
 375         (process_suffix): Likewise.
 376         (update_imm): Likewise.
 377         (finalize_imm): Likewise.
 378         (process_operands): Likewise.
 379         (build_modrm_byte): Likewise.
 380         (i386_immediate): Likewise.
 381         (i386_displacement): Likewise.
 382         (i386_index_check): Likewise.
 383         (i386_operand): Likewise.
 384         (i386_target_format): Likewise.
 385         (intel_e11): Likewise.
 386         (operand_type): Remove implicitregister.
 387         (operand_type_check): Updated. Inline.
 388         (cpu_flags_all_zero): Removed.
 389         (operand_type_all_zero): Likewise.
 390         (i386_array_biop): Likewise.
 391         (cpu_flags_biop): Likewise.
 392         (operand_type_biop): Likewise.
 393
 394 2007-09-08  H.J. Lu  <hongjiu.lu@intel.com>
 395
 396         * Makefile.am: Run "make dep-am".
 397         * Makefile.in: Regenerate.
 398
 399 2007-09-08  H.J. Lu  <hongjiu.lu@intel.com>
 400
 401         * configure.in (AC_CHECK_HEADERS): Add limits.h.
 402         * configure: Regenerated.
 403         * config.in: Likewise.
 404
 405         * config/tc-i386.c: Include "opcodes/i386-init.h".
 406         (_i386_insn): Use i386_operand_type for types.
 407         (cpu_arch_flags): Updated to new types with bitfield.
 408         (cpu_arch_tune_flags): Likewise.
 409         (cpu_arch_isa_flags): Likewise.
 410         (cpu_arch): Likewise.
 411         (i386_align_code): Likewise.
 412         (set_code_flag): Likewise.
 413         (set_16bit_gcc_code_flag): Likewise.
 414         (set_cpu_arch): Likewise.
 415         (md_assemble): Likewise.
 416         (parse_insn): Likewise.
 417         (process_operands): Likewise.
 418         (output_branch): Likewise.
 419         (output_jump): Likewise.
 420         (parse_real_register): Likewise.
 421         (mode_from_disp_size): Likewise.
 422         (smallest_imm_type): Likewise.
 423         (pi): Likewise.
 424         (type_names): Likewise.
 425         (pt): Likewise.
 426         (pte): Likewise.
 427         (swap_2_operands): Likewise.
 428         (optimize_imm): Likewise.
 429         (optimize_disp): Likewise.
 430         (match_template): Likewise.
 431         (check_string): Likewise.
 432         (process_suffix): Likewise.
 433         (check_byte_reg): Likewise.
 434         (check_long_reg): Likewise.
 435         (check_qword_reg): Likewise.
 436         (check_word_reg): Likewise.
 437         (finalize_imm): Likewise.
 438         (build_modrm_byte): Likewise.
 439         (output_insn): Likewise.
 440         (disp_size): Likewise.
 441         (imm_size): Likewise.
 442         (output_disp): Likewise.
 443         (output_imm): Likewise.
 444         (gotrel): Likewise.
 445         (i386_immediate): Likewise.
 446         (i386_displacement): Likewise.
 447         (i386_index_check): Likewise.
 448         (i386_operand): Likewise.
 449         (parse_real_register): Likewise.
 450         (i386_intel_operand): Likewise.
 451         (intel_e09): Likewise.
 452         (intel_bracket_expr): Likewise.
 453         (intel_e11): Likewise.
 454         (cpu_arch_flags_not): New.
 455         (cpu_flags_check_x64): Likewise.
 456         (cpu_flags_all_zero): Likewise.
 457         (cpu_flags_not): Likewise.
 458         (i386_cpu_flags_biop): Likewise.
 459         (cpu_flags_biop): Likewise.
 460         (cpu_flags_match); Likewise.
 461         (acc32): New.
 462         (acc64): Likewise.
 463         (control): Likewise.
 464         (reg16_inoutportreg): Likewise.
 465         (disp16): Likewise.
 466         (disp32): Likewise.
 467         (disp32s): Likewise.
 468         (disp16_32): Likewise.
 469         (anydisp): Likewise.
 470         (baseindex): Likewise.
 471         (regxmm): Likewise.
 472         (imm8): Likewise.
 473         (imm8s): Likewise.
 474         (imm16): Likewise.
 475         (imm32): Likewise.
 476         (imm32s): Likewise.
 477         (imm64): Likewise.
 478         (imm16_32): Likewise.
 479         (imm16_32s): Likewise.
 480         (imm16_32_32s): Likewise.
 481         (operand_type): Likewise.
 482         (operand_type_check): Likewise.
 483         (operand_type_match): Likewise.
 484         (operand_type_register_match): Likewise.
 485         (update_imm): Likewise.
 486         (set_code_flag): Also update cpu_arch_flags_not.
 487         (set_16bit_gcc_code_flag): Likewise.
 488         (md_begin): Likewise.
 489         (parse_insn): Use cpu_flags_check_x64 to check 64bit support.
 490         Use cpu_flags_match to match instructions.
 491         (i386_target_format): Update cpu_arch_isa_flags and
 492         cpu_arch_tune_flags to i386_cpu_flags type with bitfield.
 493         (smallest_imm_type): Check cpu_arch_tune to tune for i486.
 494         (match_template): Don't initialize overlap0, overlap1,
 495         overlap2, overlap3 and operand_types.
 496         (process_suffix): Handle crc32 with 64bit register.
 497         (MATCH): Removed.
 498         (CONSISTENT_REGISTER_MATCH): Likewise.
 499
 500         * config/tc-i386.h (arch_entry): Updated to i386_cpu_flags
 501         type.
 502
 503 2007-09-06  H.J. Lu  <hongjiu.lu@intel.com>
 504
 505         * config/tc-i386.c (match_template): Handle invlpga, vmload,
 506         vmrun and vmsave in SVME.
 507         (process_suffix): Likewise.
 508
 509 2007-09-05  H.J. Lu  <hongjiu.lu@intel.com>
 510
 511         * config/tc-i386.c (i386_index_check): Don't use RegRex
 512         on the reg_type field.
 513         (parse_real_register): Use `||' instead of `|'.
 514
 515 2007-09-04  H.J. Lu  <hongjiu.lu@intel.com>
 516
 517         * config/tc-i386.c (process_operands): Remove segment override
 518         check on SVME instructions.
 519         (i386_index_check): Remove memory operand check on SVME
 520         instructions.
 521
 522 2007-09-04  Alan Modra  <amodra@bigpond.net.au>
 523
 524         * config/tc-spu.c (struct spu_insn): Delete "flag".  Add "reloc".
 525         (md_assemble): Update init of insn.  Use insn.reloc instead of
 526         calculating from flag.
 527         (get_imm): Set reloc rather than flag.
 528         (calcop): Formatting.
 529
 530 2007-08-29  Daniel Jacobowitz  <dan@codesourcery.com>
 531
 532         * dwarf2dbg.c (dwarf2_directive_loc): Emit duplicate .loc directives.
 533
 534 2007-08-28  Daniel Jacobowitz  <dan@codesourcery.com>
 535
 536         * doc/c-arc.texi: Fix typo.
 537
 538 2007-08-28  H.J. Lu  <hongjiu.lu@intel.com>
 539
 540         * config/tc-i386.c (process_suffix): Handle cmpxchg8b in
 541         Intel mode.
 542
 543 2007-08-28  Nathan Sidwell  <nathan@codesourcery.com>
 544
 545         * config/tc-m68k.c (mcf52235_ctrl): Add cache registers.
 546         (mcf5253_ctrl): Add RAMBAR, MBAR, MBAR2.
 547         (mcf5407_ctrl): New.
 548         (m68k_cpus): Adjust 5407 entry.
 549
 550 2007-08-28  Maxim Kuvyrkov  <maxim@codesourcery.com>
 551
 552         * config/tc-m68k.c (mcf51qe_ctrl): Define 51QE control registers.
 553         (m68k_cpus): Define 51QE cpu.
 554
 555 2007-08-28  Mark Shinwell  <shinwell@codesourcery.com>
 556             Joseph Myers  <joseph@codesourcery.com>
 557
 558         * as.c (main): Flush stderr before printing listings to ensure
 559         consistent output order across platforms.
 560
 561 2007-08-28  Robert Sebastian Gerus  <arachnist@gmail.com>
 562
 563         * configure.tgt: Add support for i[3-7]86-*-dragonfly*.
 564
 565 2007-08-24  Joseph Myers  <joseph@codesourcery.com>
 566             Paul Brook  <paul@codesourcery.com>
 567
 568         * remap.c: New.
 569         * as.h (remap_debug_filename, add_debug_prefix_map): Declare.
 570         * as.c (show_usage): Document --debug-prefix-map option.
 571         (parse_args): Handle --debug-prefix-map.
 572         * dwarf2dbg.c (out_file_list, out_debug_info): Remap debug paths.
 573         * stabs.c (stabs_generate_asm_file): Remap debug paths.
 574         * Makefile.am (GAS_CFILES): Add remap.c
 575         (GENERIC_OBJS): Add remap.o.
 576         Regenerate dependencies.
 577         * Makefile.in: Regenerate.
 578         * doc/as.texinfo (--debug-prefix-map): Document.
 579
 580 2007-08-24  Aurelien Jarno  <aurel32@debian.org>
 581
 582         * config/tc-arm.c (md_apply_fix): Cast bfd_vma values to long
 583         before printing them.
 584
 585 2007-08-24  Anders Waldenborg  <anders@0x63.nu>
 586             Alan Modra  <amodra@bigpond.net.au>
 587
 588         * config/tc-i386.c (lex_got): Don't scan past a comma.
 589
 590 2007-08-23  Ben Elliston  <bje@au.ibm.com>
 591
 592         * config/tc-ppc.c (parse_cpu): Handle "750cl".
 593         (pre_defined_registers): Add "gqr0" to "gqr7", "gqr.0" to "gqr.7".
 594         (md_show_usage): Document -m750cl.
 595         (md_assemble): Handle two delimiters in succession (eg. `),').
 596         * doc/c-ppc.texi (PowerPC-Opts): Document -m750cl.
 597         * testsuite/gas/ppc/ppc.exp: Run ppc70ps dump tests.
 598         * testsuite/gas/ppc/ppc750ps.s: New file.
 599         * testsuite/gas/ppc/ppc750ps.d: Likewise.
 600
 601 2007-08-23  Ben Elliston  <bje@au.ibm.com>
 602
 603         * doc/c-arm.texi (ARM Directives): Move brackets out of @vars.
 604
 605 2007-08-17  Alan Modra  <amodra@bigpond.net.au>
 606
 607         PR gas/4079
 608         * config/tc-i386.c (x86_cons): Complain about invalid @got etc.
 609         expressions.
 610         (i386_immediate): Detect and complain about more cases of
 611         invalid immediate expressions.  Return failure rather than
 612         converting them to zero.
 613         (i386_displacement): Likewise.
 614
 615 2007-08-17  Alan Modra  <amodra@bigpond.net.au>
 616
 617         * po/Make-in: Add --msgid-bugs-address to xgettext invocation.
 618
 619 2007-08-14  Andreas Schwab  <schwab@suse.de>
 620
 621         * config/tc-ia64.c (tc_gen_reloc): Return NULL if relocation is
 622         unrepresentable.
 623
 624 2007-08-12  Matthias Klose  <doko@ubuntu.com>
 625
 626         * doc/Makefile.am (AM_MAKEINFOFLAGS, TEXI2DVI): Include
 627         $(top_srcdir)/../../bfd/doc.
 628         * doc/Makefile.in: Regenerate.
 629
 630 2007-08-10  Nick Clifton  <nickc@redhat.com>
 631
 632         * NEWS: Add a marker for the 2.18 features.
 633
 634 2007-08-09  Paul Brook  <paul@codesourcery.com>
 635
 636         * config/tc-arm.c (relaxed_symbol_addr): Compensate for alignment.
 637
 638 2007-08-09  H.J. Lu  <hongjiu.lu@intel.com>
 639
 640         * config/tc-i386.c (check_byte_reg): Support pextrb and pinsrb.
 641
 642 2007-07-29  H.J. Lu  <hongjiu.lu@intel.com>
 643
 644         * config/tc-i386.c (check_long_reg): Allow cvtss2si to convert
 645         DWORD memory to Reg64 in Intel synax.
 646         (check_qword_reg): Allow cvtsd2si to convert QWORD memory to
 647         Reg32 in Intel syntax.
 648
 649 2007-07-25  Sterling Augustine  <sterling@tensilica.com>
 650
 651         * config/tc-xtensa.c (xtensa_extui_opcode): New.
 652         (xg_expand_assembly_insn): Check for invalid extui operands.
 653         (md_begin): Initialize xtensa_extui_opcode.
 654
 655 2007-07-24  Nick Clifton  <nickc@redhat.com>
 656
 657         * config/tc-mep.h (skip_whitespace): Remove definition.
 658
 659 2007-07-23  H.J. Lu  <hongjiu.lu@intel.com>
 660
 661         * config/tc-i386.c (cpu_arch): Change i386 to PROCESSOR_I386.
 662         (f32_15): Removed.
 663         (jump_31): New.
 664         (f32_patt): Remove f32_15.
 665         (f16_patt): Likewise.
 666         (i386_align_code): Updated to alt_long_patt for 64bit by
 667         default.
 668
 669         * config/tc-i386.h (processor_type): Add PROCESSOR_I386.
 670
 671 2007-07-23  Evandro Menezes  <evandro.menezes@amd.com>
 672
 673         * config/tc-i386.c (i386_align_code): Enable alignment up to
 674         MAX_MEM_FOR_RS_ALIGN_CODE bytes.  Remove special treatment
 675         for K8.
 676
 677         * config/tc-i386.h (MAX_MEM_FOR_RS_ALIGN_CODE): Changed to 31.
 678
 679 2007-07-20  Nick Clifton  <nickc@redhat.com>
 680
 681         * app.c (do_scrub_chars): Provide a one character buffer to hold a
 682         pushed back newline at the end of an unterminated quoted string.
 683
 684 2007-07-14  Nick Clifton  <nickc@redhat.com>
 685
 686         * config/tc-arm.c (create_register_alias): Return a boolean rather
 687         than an integer.
 688         Check the return value of insert_reg_alias and do not continue to
 689         create aliases once an insertion has failed.
 690         (s_unreq): Delete the all-upper-case and all-lower-case
 691         alternatives as well.
 692
 693 2007-07-12  Kai Tietz   <kai.tietz@onevision.com>
 694
 695         * symbols.c: Print bfd_hostptr_t to file via fprintf_vma.
 696         * write.c: Likewise.
 697
 698 2007-07-11  Daniel Jacobowitz  <dan@codesourcery.com>
 699
 700         * config/tc-mips.c (mips_dwarf2_format, mips_dwarf2_addr_size): Use
 701         HAVE_64BIT_SYMBOLS.
 702
 703 2007-07-04  Richard Sandiford  <richard@codesourcery.com>
 704
 705         * config/tc-mips.c (mips_cpu_info_table): Add new entries for
 706         {24k,24ke,34k,74k}f{2_1,1_1,x}.  Also add an entry for 74kf3_2.
 707         Deprecate *x and *fx.
 708         * doc/c-mips.texi: Document the new CPU arguments.  Deprecate
 709         *x and *fx.
 710
 711 2007-07-04  H.J. Lu  <hongjiu.lu@intel.com>
 712
 713         * config/obj-coff.h (x86_64_target_format): Renamed to ...
 714         (i386_target_format): This
 715         (TARGET_FORMAT): Use i386_target_format.
 716
 717         * config/tc-i386.c (x86_64_target_format): Removed.
 718         (i386_target_format): Handle PE formats.
 719
 720 2007-07-04  Nick Clifton  <nickc@redhat.com>
 721
 722         * symbols.c (symbol_relc_make_value): Use bfd_sprintf_vma in order
 723         to get the right length of printed value.
 724
 725 2007-07-03  Nick Clifton  <nickc@redhat.com>
 726
 727         * COPYING: Replace with GPLv3 text.
 728         * app.c: Update copyright notice to refer to GPLv3.
 729         * as.c, as.h, asintl.h, atof_generic.c, bignum.h, bit_fix.h,
 730         cgen.c, cond.c, debug.c, depend.c, dw2gencfi.c, dw2gencfi.h,
 731         dwarf2dbg.c, dwarf2dbg.h, ecoff.c, ecoff.h, ehopt.c, emul.h,
 732         emul_target.h, expr.c, expr.h, flonum-copy.c, flonum.h,
 733         flonum-konst.c, frags.c, frags.h, hash.c, hash.h, input-file.c,
 734         input-file.h, input-scrub.c, ibtl-lex.h, itbl-lex.l, itbl-ops.c,
 735         itbl-ops.h, itbl-parse.y, listing.c, listing.h, literal.c,
 736         macro.c, messages.c, obj.h, output-file.c, output-file.h, read.c,
 737         read.h, sb.c, sb,h, stabs.c, struc-symbol.h, subsegs.c, subsegs.h,
 738         symbols.c, symbols.h, tc.h, write.c, write.h, config/aout_gnu.h,
 739         config/config/atof-ieee.c, config/atof-vax.c, config/bfin-aux.h,
 740         config/bfin-defs.h, config/bfin-lex.l, config/bfin-parse.y,
 741         config/itbl-mips.h, config/m68k-parse.h, config/m68k-parse.y,
 742         config/obj-aout.c, config/obj-aout.h, config/obj-coff.c,
 743         config/obj-coff.h, config/obj-ecoff.c, config/obj-ecoff.h,
 744         config/obj-elf.c, config/obj-elf.h, config/obj-evax.c,
 745         config/obj-evax.h, config/obj-multi.h, config/obj-som.c,
 746         config/obj-som.h, config/tc-alpha.c, config/tc-alpha.h,
 747         config/tc-arc.c, config/tc-arc.h, config/tc-arm.c,
 748         config/tc-arm.h, config/tc-avr.c, config/tc-avr.h,
 749         config/tc-bfin.c, config/tc-bfin.h, config/tc-cr16.c,
 750         config/tc-cr16.h, config/tc-cris.c, config/tc-cris.h,
 751         config/tc-crx.c, config/tc-crx.h, config/tc-d10v.c,
 752         config/tc-d10v.h, config/tc-d30v.c, config/tc-d30v.h,
 753         config/tc-dlx.c, config/tc-dlx.h, config/tc-fr30.c,
 754         config/tc-fr30.h, config/tc-frv.c, config/tc-frv.h,
 755         config/tc-generic.c, config/tc-generic.h, config/tc-h8300.c,
 756         config/tc-h8300.h, config/tc-hppa.c, config/tc-hppa.h,
 757         config/tc-i370.c, config/tc-i370.h, config/tc-i386.c,
 758         config/tc-i386.h, config/tc-i860.c, config/tc-i860.h,
 759         config/tc-i960.c, config/tc-i960.h, config/tc-ia64.c,
 760         config/tc-ia64.h, config/tc-ip2k.c, config/tc-ip2k.h,
 761         config/tc-iq2000.c, config/tc-iq2000.h, config/tc-m32c.c,
 762         config/tc-m32c.h, config/tc-m32r.c, config/tc-m32r.h,
 763         config/tc-m68hc11.c, config/tc-m68hc11.h, config/tc-m68k.c,
 764         config/tc-m68k.h, config/tc-maxq.c, config/tc-maxq.h,
 765         config/tc-mcore.c, config/tc-mcore.h, config/tc-mep.c,
 766         config/tc-mep.h, config/tc-mips.c, config/tc-mips.h,
 767         config/tc-mmix.c, config/tc-mmix.h, config/tc-mn10200.c,
 768         config/tc-mn10200.h, config/tc-mn10300.c, config/tc-mn10300.h,
 769         config/tc-msp430.c, config/tc-msp430.h, config/tc-mt.c,
 770         config/tc-mt.h, config/tc-ns32k.c, config/tc-ms32k.h,
 771         config/tc-openrisc.c, config/tc-openrisc.h, config/tc-or32.c,
 772         config/tc-or32.h, config/tc-pdp11.c, config/tc-pdp11.h,
 773         config/tc-pj.c, config/tc-pj.h, config/tc-ppc.c, config/tc-ppc.h,
 774         config/tc-s390.c, config/tc-s390.h, config/tc-score.c,
 775         config/tc-score.h, config/tc-sh64.c, config/tc-sh64.h,
 776         config/tc-sh.c, config/tc-sh.h, config/tc-sparc.c,
 777         config/tc-sparc.h, config/tc-spu.c, config/tc-spu.h,
 778         config/tc-tic30.c, config/tc-tic30.h, config/tc-tic4x.c,
 779         config/tc-tic4x.h, config/tc-tic54x.c, config/tc-tic54x.h,
 780         config/tc-v850.c, config/tc-v850.h, config/tc-vax.c,
 781         config/tc-vax.h, config/tc-xc16x.c, config/tc-x16x.h,
 782         config/tc-xstormy16.c, config/tc-xstormy16.h, config/tc-xtensa.c,
 783         config/tc-xtensa.h, config/tc-z80.c, config/tc-z80.h,
 784         config/tc-z8k.c, config/tc-z8k.h, config/te-386bsd.h,
 785         config/te-freebsd.h, config/te-hppa.h, config/te-irix.h,
 786         config/te-netware.h, config/te-sparcaout.h,  config/te-tmips.h,
 787         config/te-vxworks.h, config/vax-inst.h, config/xtensa-istack.h,
 788         config/xtensa-relax.c, config/xtensa-relax.h: Likewise.
 789
 790         * flonum-mult.c: Likewise, and also correct typo referring to
 791         non-existant GNU Assembler General Public License.
 792         * config/tc-m68851.h: Likewise.
 793         * NEWS: Mention the new license.  Also note where the 2.17 release
 794         happened.
 795         * config/e-crisaout.c: Add copyright header.
 796         * config/e-criself.c, config/e-i386aout.c, config/e-i386coff.c,
 797         config/e-i386elf.c, config/e-mipscoff.c, config/e-mipself.c,
 798         config/obj-multi.c, config/te-aix5.h, config/te-armeabi.h,
 799         config/te-armlinuxeabi.h, config/te-dynix.h, config/te-epoc-pe.h,
 800         config/te-generic.h, config/te-gnu.h, config/te-go32.h,
 801         config/te-hppa64.h, config/te-hppalinux64.h, config/te-hpux.h,
 802         config/te-i386aix.h, config/te-ia64aix.h, config/te-interix.h,
 803         config/te-linux.h, config/te-lnews.h, config/te-lynx.h,
 804         config/te-mach.h, config/te-macos.h, config/te-nbsd532.h,
 805         config/te-nbsd.h, config/te-pc532mach.h, config/te-pe.h,
 806         config/te-pep.h, config/te-psos.h, config/te-riscix.h,
 807         config/te-sun3.h, config/te-svr4.h, config/te-symbian.h,
 808         config/te-wince-pe.h: Likewise.
 809
 810 2007-07-03  Nathan Sidwell  <nathan@codesourcery.com>
 811
 812         * config/tc-m68k.c (m68k_ip): Add j & K operand types.
 813         (install_operand): Add E encoding.
 814         (md_begin): Check and skip initial '.' arg character.
 815         (get_num): Add 0..511 case.
 816
 817 2007-07-03  Alan Modra  <amodra@bigpond.net.au>
 818
 819         PR 4713
 820         * config/obj-elf.c (elf_ecoff_set_ext): Make static when OBJ_MAYBE_ELF.
 821         * config/obj-elf.h (obj_ecoff_set_ext): Comment.
 822
 823 2007-07-03  Mikkel Lauritsen  <renard@nospam.dk>
 824
 825         PR 4722
 826         * app.c (do_scrub_chars <state 5>): Check for output buffer full
 827         after memcpy.
 828
 829 2007-07-02  Joseph Myers  <joseph@codesourcery.com>
 830
 831         * config/tc-mips.c (s_dtprelword, s_dtpreldword,
 832         s_dtprel_internal): New.
 833         (mips_pseudo_table): Add .dtprelword and .dtpreldword.
 834         (md_apply_fix): Handle BFD_RELOC_MIPS_TLS_DTPREL32 and
 835         BFD_RELOC_MIPS_TLS_DTPREL64.
 836
 837 2007-07-02  Alan Modra  <amodra@bigpond.net.au>
 838
 839         * Makefile.am: Run "make dep-am".
 840         * Makefile.in: Regenerate.
 841         * aclocal.m4: Regenerate.
 842         * config.in: Regenerate.
 843         * doc/Makefile.in: Regenerate.
 844         * po/POTFILES.in: Regenerate.
 845         * po/gas.pot: Regenerate.
 846
 847 2007-07-02  Alan Modra  <amodra@bigpond.net.au>
 848
 849         * config/tc-ppc.c (ppc_pe_section): Comment out code assigning
 850         coff section flag values to bfd section flag.
 851
 852 2007-06-30  H.J. Lu  <hongjiu.lu@intel.com>
 853
 854         * aclocal.m4: Regenerated.
 855         * doc/Makefile.in: Likewise.
 856         * Makefile.in: Likewise.
 857
 858 2007-06-29  Joseph Myers  <joseph@codesourcery.com>
 859
 860         * as.c (main): Only call create_obj_attrs_section if IS_ELF.
 861
 862 2007-06-29  Joseph Myers  <joseph@codesourcery.com>
 863
 864         * as.c (create_obj_attrs_section): New.
 865         (main): Call create_obj_attrs_section for ELF.
 866         * read.c (s_gnu_attribute, skip_whitespace, skip_past_char,
 867         skip_past_comma, s_vendor_attribute): New.
 868         (potable): Add gnu_attribute for ELF.
 869         * read.h (s_vendor_attribute): Declare.
 870         * config/tc-arm.c (s_arm_eabi_attribute): Replace by wrapper
 871         round s_vendor_attribute.
 872         (aeabi_set_public_attributes): Update for new attributes
 873         interfaces.
 874         (arm_md_end): Remove attributes contents setting now done
 875         generically.
 876
 877 2007-06-29  M R Swami Reddy  <MR.Swami.Redd@nsc.com>
 878
 879         * Makefile.am: Add CR16 related entry.
 880         * Makefile.in: Regenerate.
 881         * config/tc-cr16.h: New file
 882         * config/tc-cr16.c: New file
 883         * doc/c-cr16.texi: New file for cr16
 884         * doc/all.texi: Entry for cr16
 885         * doc/Makefile.am: Added c-cr16.texi
 886         * doc/Makefile.in: Regenerate
 887         * doc/as.texinfo: Entry for CR16 target
 888         * NEWS: Announce the support for the new target.
 889
 890 2007-06-26  Paul Brook  <paul@codesourcery.com>
 891
 892         * config/tc-arm.c (parse_operands): Accept generic coprocessor regs
 893         for OP_RVC.
 894         (reg_names): Add fpinst, pfinst2, mvfr0 and mvfr1.
 895
 896 2007-06-25  H.J. Lu  <hongjiu.lu@intel.com>
 897
 898         * config/tc-i386.c (process_operands): Replace regKludge
 899         with RegKludge.
 900
 901 2007-06-25  Richard Sandiford  <richard@codesourcery.com>
 902
 903         * config/tc-mips.h (TC_SYMFIELD_TYPE): New.
 904         * config/tc-mips.c (append_insn): Record which symbols have
 905         R_MIPS16_26 relocations against them.
 906         (mips_fix_adjustable): Don't reduce relocations against such symbols.
 907
 908 2007-06-22  Sterling Augustine  <sterling@tensilica.com>
 909
 910         * config/tc-xtensa.c (xg_assembly_relax): Comment termination rules.
 911         (frag_format_size): Handle RELAX_IMMED_STEP3.
 912         (xtensa_relax_frag, md_convert_frag): Likewise.
 913         * config/tc-xtensa.h (xtensa_relax_statesE): Add RELAX_IMMED_STEP3.
 914         (RELAX_IMMED_MAXSTEPS): Adjust.
 915         * config/xtensa-relax.c (widen_spec_list): Add transitions from
 916         wide branches to branch-over-jumps.
 917         (build_transition): Handle wide branches in transition patterns.
 918
 919 2007-06-22  H.J. Lu  <hongjiu.lu@intel.com>
 920
 921         * config/tc-i386.c (disp_size): New.
 922         (imm_size): Likewise.
 923         (output_disp): Use disp_size and imm_size.
 924         (output_imm): Use imm_size.
 925
 926 2007-06-19  Sterling Augustine  <sterling@tensilica.com>
 927
 928         * config/tc-xtensa.h (struct xtensa_frag_type): Update comment about
 929         use of literal_frag field.
 930         * config/tc-xtensa.c (xtensa_mark_literal_pool_location): Record frag
 931         in the literal_frag field.
 932         (xtensa_move_literals): Use it here instead of searching.  Update
 933         literal_frag field with new value.
 934
 935 2007-06-14  Paul Brook  <paul@codesourcery.com>
 936
 937         * config/tc-arm.c (do_t_mov_cmp): Handle shift by register and
 938         narrow shift by immediate.
 939
 940 2007-06-14  H.J. Lu  <hongjiu.lu@intel.com>
 941
 942         * Makefile.am (ACLOCAL_AMFLAGS): Add -I ../config -I ../bfd.
 943
 944         * acinclude.m4: Don't include m4 files.
 945         (BFD_BINARY_FOPEN): Removed.
 946         Remove libtool kludge.
 947
 948         * Makefile.in: Regenerated.
 949         * doc/Makefile.in: Likewise.
 950         * aclocal.m4: Likewise.
 951         * configure: Likewise.
 952
 953 2007-06-11  Sterling Augustine  <sterling@tensilica.com>
 954             Bob Wilson  <bob.wilson@acm.org>
 955
 956         * config/tc-xtensa.c (XTENSA_PROP_INSN_NO_TRANSFORM): Renamed to...
 957         (XTENSA_PROP_NO_TRANSFORM): ...this.
 958         (frag_flags_struct): Move is_no_transform out of the insn sub-struct.
 959         (xtensa_mark_frags_for_org): New.
 960         (xtensa_handle_align): Set RELAX_ORG frag subtype for rs_org.
 961         (xtensa_post_relax_hook): Call xtensa_mark_frags_for_org.
 962         (get_frag_property_flags): Adjust reference to is_no_transform flag.
 963         (xtensa_frag_flags_combinable): Likewise.
 964         (frag_flags_to_number): Likewise.  Use XTENSA_PROP_NO_TRANSFORM.
 965         * config/tc-xtensa.h (xtensa_relax_statesE): Add RELAX_ORG.
 966
 967 2007-06-06  Paul Brook  <paul@codesourcery.com>
 968
 969         * config/tc-arm.c (s_align): Pad code sections appropriately.
 970
 971 2007-06-05  Paul Brook  <paul@codesourcery.com>
 972
 973         * config/tc-arm.c (insns): Correct Thumb-2 ldrd/strd opcodes.
 974
 975 2007-06-05  Nick Clifton  <nickc@redhat.com>
 976
 977         PR gas/4587
 978         * config/tc-sparc.c (sparc_ip): Terminate tls_ops array.
 979
 980 2007-06-05  Alan Modra  <amodra@bigpond.net.au>
 981
 982         * config/tc-spu.c (spu_cons): Use deferred_expression.  Handle
 983         number@ppu.
 984         (tc_gen_reloc): Abort if neither addsy or subsy is set.
 985         (md_apply_fix): Don't attempt to resolve SPU_PPU relocs.
 986         * config/tc-spu.h (md_operand): Handle @ppu without sym.
 987
 988 2007-05-31  Paul Brook  <paul@codesourcery.com>
 989
 990         * config/tc-arm.c (insns): Allow strex on M profile cores.
 991
 992 2007-05-29  David S. Miller  <davem@davemloft.net>
 993             Jakub Jelinek  <jakub@redhat.com>
 994
 995         PR gas/4558
 996         * config/tc-sparc.c (md_apply_fix): Fix relocation overflow checks
 997         for BFD_RELOC_SPARC_WDISP16 and BFD_RELOC_SPARC_WDISP19.
 998
 999 2007-05-29  Alan Modra  <amodra@bigpond.net.au>
1000
1001         * config/tc-spu.h: Wrap in #ifndef/#endif.  Delete coff macros.
1002
1003 2007-05-29  Alan Modra  <amodra@bigpond.net.au>
1004
1005         * config/tc-ppc.c: Convert to ISO C.
1006         * config/tc-ppc.c: Likewise.
1007
1008 2007-05-29  Alan Modra  <amodra@bigpond.net.au>
1009
1010         * write.h (EXEC_MACHINE_TYPE): Delete.
1011         (string_byte_count, section_alignment): Delete.
1012
1013 2007-05-28  Nathan Sidwell  <nathan@codesourcery.com>
1014
1015         * app.c (do_scrub_chars): Cope with \ at end of buffer.
1016
1017 2007-05-26  Alan Modra  <amodra@bigpond.net.au>
1018
1019         * config/tc-ppc.c (ppc_insert_operand): Truncate sign bits in
1020         top 32 bits of 64 bit value if so doing results in passing
1021         range check.  Rewrite sign extension fudges similarly.  Enable
1022         fudges for powerpc64 too.  Report user value if range check
1023         fails rather than fudged value.  Negate PPC_OPERAND_NEGATIVE
1024         range rather than value, also to report user value on failure.
1025
1026 2007-03-25  Paul Brook  <paul@codesourcery.com>
1027
1028         * config/tc-arm.c (T2_SUBS_PC_LR): Define.
1029         (do_t_add_sub): Correctly encode subs pc, lr, #const.
1030         (do_t_mov_cmp): Correctly encode movs pc, lr.
1031
1032 2007-05-24  Steve Ellcey  <sje@cup.hp.com>
1033
1034         * Makefile.in: Regnerate.
1035         * configure: Regenerate.
1036         * aclocal.m4: Regenerate.
1037         * doc/Makefile.in: Regenerate.
1038
1039 2007-05-22  Bob Wilson  <bob.wilson@acm.org>
1040
1041         * doc/c-xtensa.texi (Xtensa Automatic Alignment): Remove statements
1042         and index entries about automatic alignment of ENTRY instructions.
1043
1044 2007-05-22  Nick Clifton  <nickc@redhat.com>
1045
1046         * doc/as.texinfo: Use @copying around the copyright notice.
1047
1048 2007-05-18  Joseph Myers  <joseph@codesourcery.com>
1049
1050         * config/tc-mips.c (s_mipsset): Use generic s_set for directives
1051         containing a comma.
1052
1053 2007-05-17  H.J. Lu  <hongjiu.lu@intel.com>
1054
1055         PR gas/4517
1056         2003-06-05  Michal Ludvig  <mludvig@suse.cz>
1057         * doc/as.texinfo: Document new directives: .cfi_restore,
1058         .cfi_undefined, .cfi_same_value, .cfi_return_column,
1059         .cfi_remember_state and .cfi_restore_state.
1060
1061 2007-05-17  Nathan Sidwell  <nathan@codesourcery.com>
1062
1063         * config/tc-m68k.c (md_apply_fix): Show value of out of range
1064         fixups in error message.
1065         (md_conver_frag_1): Propagate the fix source location and use
1066         as_bad_where rather than fatal, for better error messages.
1067
1068 2007-05-16  Paul Brook  <paul@codesourcery.com>
1069
1070         * config/tc-arm.c (v7m_psrs): Add uppercase PSR names and xpsr.
1071
1072 2007-05-15  Mark Shinwell  <shinwell@codesourcery.com>
1073
1074         * app.c (do_scrub_chars): Don't damage \@ pseudo-variables.
1075
1076 2007-05-15  Vincent Riviere  <vincent.riviere@freesbee.fr>
1077
1078         PR gas/3041
1079         * config/tc-m68k.c (relaxable_symbol): Make sure that the correct
1080         addend is stored for relocs against weak symbols.
1081         (md_apply_fix): So not loose track of addend for relocs against
1082         weak symbols.
1083
1084 2007-05-14  Thiemo Seufer  <ths@mips.com>
1085
1086         * config/tc-mips.c (md_parse_option): Fix parsing of -O option.
1087
1088 2007-05-14  Mei Ligang  <ligang@sunnorth.com.cn>
1089
1090         * config/tc-score.c (data_op2, validate_immediate): Fix bug for
1091         addri, addri.c, subi, and subi.c when immediate number is hex.
1092         (score_insns): Remove subis and subis.c.
1093         (do_sub_rdi16): Delete.
1094
1095 2007-05-11  Alan Modra  <amodra@bigpond.net.au>
1096
1097         * config/tc-spu.c (md_pseudo_table): Add int, long, quad.  Call
1098         spu_cons for word.
1099         (md_assemble): Tidy use of insn.flag.
1100         (get_imm): Likewise.  Handle uppercase input too.
1101         (spu_cons): New function.
1102         * config/tc-spu.h (tc_fix_adjustable): Don't adjust SPU_PPU relocs.
1103         (TC_FORCE_RELOCATION): Don't resolve them either.
1104
1105 2007-05-05  Mark Shinwell  <shinwell@codesourcery.com>
1106
1107         * config/tc-arm.c (md_apply_fix): Generate more accurate
1108         diagnostic when 8-bit immediate range is exceeded for
1109         BFD_RELOC_ARM_OFFSET_IMM8.
1110
1111 2007-05-04  Alan Modra  <amodra@bigpond.net.au>
1112
1113         PR gas/4460
1114         * config/tc-i386.c (lex_got): Don't replace the reloc token with
1115         a space if we already have a space.
1116
1117 2007-05-03  H.J. Lu  <hongjiu.lu@intel.com>
1118
1119         * config/tc-i386.c (match_template): Don't explicitly check
1120         suffix for crc32 in Intel mode.
1121         (process_suffix): Issue an error for crc32 if the operand size
1122         is ambiguous.
1123
1124 2007-05-03  Vincent Riviere  <vincent.riviere@freesbee.fr>
1125             Nick Clifton  <nickc@redhat.com>
1126
1127         PR gas/3041
1128         * config/tc-m68k.c (relaxable_symbol): Do not relax weak symbols.
1129         (tc_gen_reloc): Adjust the addend of relocs against weak symbols.
1130         (md_apply_fix): Put zero values into the frags referencing weak
1131         symbols.
1132
1133 2007-05-02  Alan Modra  <amodra@bigpond.net.au>
1134
1135         PR 4448
1136         * config/tc-ppc.c (ppc_insert_operand): Don't increase min for
1137         PPC_OPERAND_PLUS1.
1138
1139 2007-05-01  H.J. Lu  <hongjiu.lu@intel.com>
1140
1141         * config/tc-i386.c (match_template): Check suffix for crc32 in
1142         Intel mdoe.
1143         (process_suffix): Default the suffix of 8bit crc32 to
1144         BYTE_MNEM_SUFFIX.
1145         (check_byte_reg): Skip check for 8bit crc32.
1146
1147 2007-04-30  H.J. Lu  <hongjiu.lu@intel.com>
1148
1149         * config/tc-i386.c (md_assemble): Use register_prefix in
1150         error/warning message.
1151         (check_byte_reg): Likewise.
1152         (check_long_reg): Likewise.
1153         (check_qword_reg): Likewise.
1154         (check_word_reg): Likewise.
1155         (process_operands): Likewise.
1156
1157 2007-04-30  Alan Modra  <amodra@bigpond.net.au>
1158
1159         PR 4436
1160         * config/tc-ppc.c (ppc_insert_operand): Disable range check if
1161         min > max.
1162
1163 2007-04-28  Thiemo Seufer  <ths@networkno.de>
1164
1165         * config/tc-mips.c: Fix comment.
1166
1167 2007-04-26  Anatoly Sokolov <aesok@post.ru>
1168
1169         * config/tc-avr.c (mcu_types): Add support for atmega8hva and
1170         atmega16hva devices. Move at90usb82 device to 'avr5' architecture.
1171         * doc/c-avr.texi: Document new devices.
1172
1173 2007-04-24  Alan Modra  <amodra@bigpond.net.au>
1174
1175         * Makefile.am: Run "make dep-am".
1176         * Makefile.in: Regenerate.
1177
1178 2007-04-23  Nathan Sidwell  <nathan@codesourcery.com>
1179
1180         * config/tc-m68k.c (mcf54455_ctrl): New.
1181         (HAVE_LONG_DISP, HAVE_LONG_CALL, HAVE_LONG_COND): New.
1182         (m68k_archs): Add isac.
1183         (m68k_cpus): Add 54455 family.
1184         (m68k_ip): Split Bg into Bb, Bs, Bg.
1185         (m68k_elf_final_processing): Add ISA_C.
1186         * doc/c-m68k.texi (M680x0 Options): Add isac.
1187
1188 2007-04-22  Alan Modra  <amodra@bigpond.net.au>
1189
1190         * read.c (read_a_source_file): Skip multiple spaces to
1191         cover hack in mmix md_start_line_hook which overwrites a
1192         colon with a space.  Delete sermon and needless assertion.
1193
1194 2007-04-21  Alan Modra  <amodra@bigpond.net.au>
1195
1196         * config/atof-vax.c (atof_vax_sizeof): Change return type to unsigned.
1197         (md_atof): Make number_of_chars unsigned.  Revert last change.
1198         * config/tc-or32.c (md_apply_fix): Delete bogus assertions.
1199         * config/tc-sh.c (sh_optimize_expr): Only define for OBJ_ELF.
1200         * config/tc-sh.h (md_optimize_expr): Likewise.
1201         * config/tc-sh64.c (shmedia_md_pcrel_from_section): Delete bogus
1202         assertion.
1203         * config/tc-xtensa.c (convert_frag_immed_finish_loop): Likewise.
1204
1205 2007-04-21  Nick Clifton  <nickc@redhat.com>
1206
1207         * config/atof-vax.c (md_atof): Fix comparison inside know().
1208
1209         * config/tc-ia64.c (emit_one_bundle): Fix typo.
1210
1211 2007-04-21  Alan Modra  <amodra@bigpond.net.au>
1212
1213         * expr.c (expr): Assert on rankarg, not rank which can be unsigned.
1214         * read.c (read_a_source_file): Remove buffer_limit[-1] assertion.
1215         Don't skip over NUL char.
1216         (pseudo_set): Set X_op for registers to O_register.
1217         * symbols.c (symbol_clone): Remove assertion that sym is defined.
1218         (resolve_symbol_value): Resolve O_register symbols.
1219         * config/tc-i386.c (parse_real_register): Don't use i386_float_regtab.
1220         Instead find st(0) by hash lookup.
1221         * config/tc-ppc.c (ppc_macro): Warning fix.
1222
1223         * as.h (ENABLE_CHECKING): Default define to 0.
1224         (know): Assert if ENABLE_CHECKING.
1225         (struct relax_type): Remove superfluous declaration.
1226         * configure.in (--enable-checking): New.
1227         * configure: Regenerate.
1228         * config.in: Regenerate.
1229         * config/tc-ppc.c (ppc_setup_opcodes): Do checks when ENABLE_CHECKING.
1230         Check for duplicate powerpc_operands entries.
1231
1232 2007-04-20  Nathan Sidwell  <nathan@codesourcery.com>
1233
1234         * config/tc-m68k.c (mcf5253_ctrl): New.
1235         (mcf52223_ctrl): New.
1236         (m68k_cpus): Add 5253, 52221, 52223.
1237
1238         * config/m68k-parse.h (RAMBAR_ALT): New.
1239         * config/tc-m68k.c (mcf5206_ctrl, mcf5307_ctrl): New.
1240         (mcf_ctrl, mcf5208_ctrl, mcf5210a_ctrl, mcf5213_ctrl, mcf52235_ctrl,
1241         mcf5225_ctrl, mcf5235_ctrl, mcf5271_ctrl, mcf5275_ctrl,
1242         mcf5282_ctrl, mcf5329_ctrl, mcf5373_ctrl, mcfv4e_ctrl,
1243         mcf5475_ctrl, mcf5485_ctrl): Add RAMBAR synonym for
1244         RAMBAR1.
1245         (mcf5272_ctrl): Add RAMBAR0, replace add RAMBAR with RAMBAR_ALT.
1246         (m68k_cpus): Adjust 5206, 5206e & 5307 entries.
1247         (m68k_ip) <Case J>: Detect when RAMBAR_ALT should be used.  Add it
1248         to control register mapping.
1249
1250 2007-04-20  Alan Modra  <amodra@bigpond.net.au>
1251
1252         * messages.c (as_internal_value_out_of_range): Fix typo in
1253         error message.  Return after printing domain error.
1254         * config/tc-ppc.c (ppc_insert_operand): Preserve low zero bits
1255         in max when shifting right.
1256
1257 2007-04-20  Alan Modra  <amodra@bigpond.net.au>
1258
1259         * messages.c (as_internal_value_out_of_range): Extend to report
1260         errors for values with invalid low bits set.
1261         * config/tc-ppc.c (ppc_setup_opcodes): Check powerpc_operands bitm
1262         fields.  Check that operands and opcode fields are disjoint.
1263         (ppc_insert_operand): Check operands using mask rather than bit
1264         count.   Check low bits too.  Handle PPC_OPERAND_PLUS1.  Adjust
1265         insertion code.
1266         (md_apply_fix): Adjust for struct powerpc_operand change.
1267
1268 2007-04-19  Paul Brook  <paul@codesourcery.com>
1269
1270         * config/tc-arm.c (md_assemble): Only allow 16-bit instructions on
1271         Thumb-1.  Add sanity check for bogus relaxations.
1272
1273 2007-04-19  Paul Brook  <paul@codesourcery.com>
1274
1275         * config/tc-arm.c (insns): Allow rsb and rsbs on Thumb-1.
1276
1277 2007-04-19  Alan Modra  <amodra@bigpond.net.au>
1278
1279         * Makefile.am: Run "make dep-am".
1280         * Makefile.in: Regenerate.
1281
1282 2007-04-19  Nathan Froyd <froydnj@codesourcery.com>
1283
1284         * doc/c-ppc.texi (PowerPC-Opts): Document -me500, -me500x2, -mspe.
1285
1286 2007-04-18  H.J. Lu <hongjiu.lu@intel.com>
1287
1288         * doc/c-i386.texi; Document .ssse3, .sse4.1, .sse4.2 and .sse4.
1289
1290 2007-04-18  H.J. Lu <hongjiu.lu@intel.com>
1291
1292         * config/tc-i386.c (cpu_arch): Add .sse4.2 and .sse4.
1293         (match_template): Handle operand size for crc32 in SSE4.2.
1294         (process_suffix): Handle operand type for crc32 in SSE4.2.
1295         (output_insn): Support SSE4.2.
1296
1297 2007-04-18  H.J. Lu <hongjiu.lu@intel.com>
1298
1299         * config/tc-i386.c (cpu_arch): Add .sse4.1.
1300         (process_operands): Adjust implicit operand for blendvpd,
1301         blendvps and pblendvb in SSE4.1.
1302         (output_insn): Support SSE4.1.
1303
1304 2007-04-18  Paul Brook  <paul@codesourcery.com>
1305
1306         * config/tc-arm.c (do_t_rsb): Use 16-bit encoding when possible.
1307
1308 2007-04-16  Kaz Kojima  <kkojima@rr.iij4u.or.jp>
1309
1310         * config/tc-sh.c (sh_handle_align):  Call as_bad_where instead
1311         of as_warn_where for misaligned data.
1312
1313 2007-04-15  Kaz Kojima  <kkojima@rr.iij4u.or.jp>
1314
1315         * config/tc-sh.c (align_test_frag_offset_fixed_p): Handle
1316         rs_fill frags.
1317
1318 2007-04-14  Steve Ellcey  <sje@cup.hp.com>
1319
1320         * Makefile.am: Add ACLOCAL_AMFLAGS.
1321         * Makefile.in: Regenerate.
1322
1323 2007-04-14  Kaz Kojima  <kkojima@rr.iij4u.or.jp>
1324
1325         * config/tc-sh.c (align_test_frag_offset_fixed_p): New.
1326         (sh_optimize_expr): Likewise.
1327         * config/tc-sh.h (md_optimize_expr): Define.
1328         (sh_optimize_expr): Prototype.
1329
1330 2007-04-06  Matt Thomas  <matt@netbsd.org>
1331
1332         * config/tc-vax.c (vax_cons): Added to support %pcrel{8,16,32}(exp)
1333         to emit pcrel relocations by DWARF2 in non-code sections.  Borrowed
1334         heavily from tc-sparc.c.  (vax_cons_fix_new): Likewise.
1335
1336 2007-04-04  Kazu Hirata  <kazu@codesourcery.com>
1337
1338         * config/tc-m68k.c (HAVE_LONG_BRANCH): Add fido_a.
1339
1340 2007-04-04  Paul Brook  <paul@codesourcery.com>
1341
1342         * config/tc-arm.c (do_neon_ext): Enforce immediate range.
1343         (insns): Use I15 for vext.
1344
1345 2007-04-04  Paul Brook  <paul@codesourcery.com>
1346
1347         * configure.tgt: Loosen checks for arm uclinux eabi targets.
1348
1349 2007-04-02  Sterling Augustine  <sterling@tensilica.com>
1350
1351         * config/tc-xtensa.c (xtensa_flush_pending_output): Check
1352         outputting_stabs_line_debug.
1353
1354 2007-03-26  Anatoly Sokolov <aesok@post.ru>
1355
1356         * config/tc-avr.c (mcu_types): Add support for at90pwm1, at90usb82,
1357         at90usb162, atmega325p, atmega329p, atmega3250p and atmega3290p
1358         devices.
1359         * doc/c-avr.texi: Document new devices.
1360
1361 2007-04-02  Richard Sandiford  <richard@codesourcery.com>
1362
1363         * doc/as.texinfo: Add -mvxworks-pic to the list of MIPS options.
1364         * doc/c-mips.texi (-KPIC, -mvxworks-pic): Document.
1365         * config/tc-mips.c (md_show_usage): Mention -mvxworks-pic.
1366
1367 2007-03-30  Sterling Augustine  <sterling@tensilica.com>
1368             Bob Wilson  <bob.wilson@acm.org>
1369
1370         * config/tc-xtensa.c (xtensa_move_labels): Remove loops_ok argument.
1371         Do not check is_loop_target flag.
1372         (xtensa_frob_label): Adjust calls to xtensa_move_labels.
1373         (xg_assemble_vliw_tokens): Likewise.  Also avoid calling
1374         xtensa_move_labels for alignment of loop opcodes.
1375
1376 2007-03-30  H.J. Lu  <hongjiu.lu@intel.com>
1377
1378         * config/tc-i386.c (process_suffix): Reindent a bit.
1379
1380 2007-03-30  Paul Brook  <paul@codesourcery.com>
1381
1382         * config/tc-arm.c (encode_thumb2_ldmstm): New function.
1383         (do_t_ldmstm): Generate 16-bit push/pop.  Use encode_thumb2_ldmstm.
1384         (do_t_push_pop):  Use encode_thumb2_ldmstm.
1385
1386 2007-03-29  DJ Delorie  <dj@redhat.com>
1387
1388         * config/tc-m32c.c (rl_for, relaxable): Protect argument.
1389         (md_relax_table): Add entries for ADJNZ macros.
1390         (M32C_Macros): Add ADJNZ macros.
1391         (subtype_mappings): Add entries for ADJNZ macros.
1392         (insn_to_subtype): Check for adjnz and sbjnz insns.
1393         (md_estimate_size_before_relax): Pass insn to insn_to_subtype.
1394         (md_convert_frag): Convert adjnz and sbjnz.
1395
1396 2007-03-29  Nick Clifton  <nickc@redhat.com>
1397
1398         * itbl-ops.c (itbl_entry): Remove unnecessary and excessively long
1399         initialization.
1400         * itbl-ops.h (enum e_processor): Initialise the e_nprocs field
1401         using ITBL_NUMBER_OF_PROCESSORS.
1402         * itbl-parse.y (yyerror): Remove use of redundant macro PARAMS.
1403
1404 2007-03-28  H.J. Lu  <hongjiu.lu@intel.com>
1405
1406         * config/tc-i386.c (build_modrm_byte): For instructions with 2
1407         register operands, encode destination in i.rm.regmem if its
1408         RegMem bit is set.
1409
1410 2007-03-28  Richard Sandiford  <richard@codesourcery.com>
1411             Phil Edwards  <phil@codesourcery.com>
1412
1413         * doc/as.texinfo: Put the contents after the title page rather
1414         than at the end of the document.
1415
1416 2007-03-27  Alan Modra  <amodra@bigpond.net.au>
1417
1418         * NEWS: Mention ".reloc".
1419
1420 2007-03-26  Sterling Augustine  <sterling@tensilica.com>
1421
1422         * config/tc-xtensa.c (xg_translate_idioms): Allow assembly idioms
1423         in FLIX instructions.
1424
1425 2007-03-26  Julian Brown  <julian@codesourcery.com>
1426
1427         * config/tc-arm.c (arm_it): Add immisfloat field.
1428         (parse_qfloat_immediate): Disallow integer syntax for floating-point
1429         immediates. Fix hex immediates, handle 0.0 and -0.0 specially.
1430         (parse_neon_mov): Set immisfloat bit for operand if it parsed as a
1431         float.
1432         (neon_cmode_for_move_imm): Reject non-float immediates for float
1433         operands.
1434         (neon_move_immediate): Pass immisfloat bit to neon_cmode_for_move_imm.
1435
1436 2007-03-26  Julian Brown  <julian@codesourcery.com>
1437
1438         * doc/c-arm.texi: Add documentation for .dn/.qn directives.
1439
1440 2007-03-26  Alan Modra  <amodra@bigpond.net.au>
1441
1442         * doc/as.texinfo (Reloc): Document.
1443         * read.c (potable): Add "reloc".
1444         (s_reloc): New function.
1445         * write.c (reloc_list): New global var.
1446         (resolve_reloc_expr_symbols): New function.
1447         (write_object_file): Call it.
1448         (write_relocs): Process reloc_list.
1449         * write.h (struct reloc_list): New.
1450         (reloc_list): Declare.
1451
1452 2007-03-24  Paul Brook  <paul@codesourcery.com>
1453
1454         * config/tc-arm.c (do_t_ldmstm): Error on Thumb-2 addressing modes.
1455
1456 2007-03-24  Paul Brook  <paul@codesourcery.com>
1457         Mark Shinwell  <shinwell@codesourcery.com>
1458
1459         * config/tc-arm.c (operand_parse_code): Add OP_oRRw.
1460         (parse_operands): Don't expect comma if first operand missing.
1461         Handle OP_oRRw.
1462         (do_srs): Encode register number, checking it is r13.  Update comment.
1463         (insns): Update SRS entries to take a register.
1464
1465 2007-03-23  H.J. Lu  <hongjiu.lu@intel.com>
1466
1467         * config/tc-i386.c (md_begin): Allow '.' in mnemonic.
1468
1469 2007-03-23  Mark Shinwell  <shinwell@codesourcery.com>
1470
1471         * config/tc-arm.c (md_apply_fix): Turn CBZ instructions that
1472         attempt to jump to the next instruction into NOPs.
1473
1474 2007-03-23  Alan Modra  <amodra@bigpond.net.au>
1475
1476         * config/tc-spu.c: Don't include opcode/spu.h.
1477         (md_assemble): Set tc_fix_data.insn_tag and arg_format.
1478         (md_apply_fix): Adjust.
1479         * config/tc-spu.h: Include opcode/spu.h.
1480         (struct tc_fix_info): New.
1481         (TC_FIX_TYPE, TC_INIT_FIX_DATA): Adjust.
1482         (TC_FORCE_RELOCATION): Define.
1483
1484 2007-03-22  Joseph Myers  <joseph@codesourcery.com>
1485
1486         * doc/as.texinfo: Include VERSION_PACKAGE when reporting version.
1487
1488 2007-03-21  H.J. Lu  <hongjiu.lu@intel.com>
1489
1490         * config/tc-i386.c (process_suffix): Check 0x90 instead of
1491         xchg for xchg %rax,%rax.
1492
1493 2007-03-21  H.J. Lu  <hongjiu.lu@intel.com>
1494
1495         * config/tc-i386.c: Replace REX_MODE64, REX_EXTX, REX_EXTY
1496         and REX_EXTZ with REX_W, REX_R, REX_X and REX_B respectively.
1497
1498 2007-03-21  H.J. Lu  <hongjiu.lu@intel.com>
1499
1500         PR binutils/4218
1501         * config/tc-i386.c (match_template): Properly handle 64bit mode
1502         "xchg %eax, %eax".
1503
1504 2007-03-21  Anton Ertl  <anton@mips.complang.tuw>
1505
1506         PR gas/4124
1507         * config/tc-alpha.c (emit_ustX): Fix ustq code generation.
1508
1509 2007-03-21  H.J. Lu  <hongjiu.lu@intel.com>
1510
1511         * Makefile.am: Run dep-am.
1512         * Makefile.in: Regenerated.
1513
1514         * config/tc-i386.c: Don't include "opcodes/i386-opc.h".
1515
1516         * config/tc-i386.h: Include "opcodes/i386-opc.h".
1517         (NOP_OPCODE): Removed.
1518         (template): Likewise.
1519
1520 2007-03-21  Andreas Schwab  <schwab@suse.de>
1521
1522         * config/tc-i386.h (NOP_OPCODE): Restore.
1523
1524 2007-03-18  Mark Shinwell  <shinwell@codesourcery.com>
1525
1526         * config/tc-arm.c (do_mul): Don't warn about overlapping
1527         Rd and Rm operands when assembling for v6 or above.
1528         Correctly capitalize register names in the messages.
1529         (do_mlas): Likewise.  Delete spurious blank line.
1530
1531 2007-03-16  Kazu Hirata  <kazu@codesourcery.com>
1532
1533         * config/tc-m68k.c (m68k_cpus): Add an entry for fidoa.
1534
1535 2007-03-15  H.J. Lu  <hongjiu.lu@intel.com>
1536
1537         * config/tc-i386.c (md_begin): Use i386_regtab_size to scan
1538         i386_regtab.
1539         (parse_register): Use i386_regtab_size instead of ARRAY_SIZE
1540         on i386_regtab.
1541
1542 2007-03-15  Alexandre Oliva  <aoliva@redhat.com>
1543
1544         PR gas/4184
1545         * app.c (do_scrub_chars): PUT after setting states.
1546
1547 2007-03-15  H.J. Lu  <hongjiu.lu@intel.com>
1548
1549         * Makefile.am: Run "make dep-am".
1550         * Makefile.in: Regenerated.
1551
1552         * config/tc-i386.c: Include "opcodes/i386-opc.h" instead of
1553         "opcode/i386.h".
1554         (md_begin): Check reg_name != NULL for the last entry in
1555         i386_regtab.
1556
1557         * config/tc-i386.h: Move many entries to opcode/i386.h and
1558         opcodes/i386-opc.h.
1559
1560         * configure.in (need_opcodes): Set true for i386.
1561         * configure: Regenerated.
1562
1563 2007-03-15  H.J. Lu  <hongjiu.lu@intel.com>
1564
1565         * Makefile.am (REPORT_BUGS_TO): Removed.
1566         (INCLUDES): Remove -DREPORT_BUGS_TO.
1567         * Makefile.in: Regenerated.
1568
1569         * configure.in (--with-bugurl): Removed.
1570         * configure: Regenerated.
1571
1572         * doc/Makefile.am (as_TEXINFOS): Remove gasver.texi.
1573         (AM_MAKEINFOFLAGS): Add -I ../../bfd/doc.
1574         (TEXI2DVI): Likewise.
1575         (gasver.texi): Removed.
1576         (MOSTLYCLEANFILES): Remove gasver.texi.
1577         (as.1): Don't depend on gasver.texi.
1578         * doc/Makefile.in: Regenerated.
1579
1580         * doc/as.texi: Include bfdver.texi instead of gasver.texi.
1581
1582 2007-03-14  Daniel Jacobowitz  <dan@codesourcery.com>
1583
1584         * config/tc-arm.c (arm_copy_symbol_attributes): New.
1585         * config/tc-arm.h (arm_copy_symbol_attributes): Declare.
1586         (TC_COPY_SYMBOL_ATTRIBUTES): Define.
1587         * gas/symbols.c (copy_symbol_attributes): Use
1588         TC_COPY_SYMBOL_ATTRIBUTES.
1589
1590 2007-03-14  Paul Brook  <paul@codesourcery.com>
1591
1592         * config/tc-arm.c (T16_32_TAB): Fix dec_sp encoding.
1593
1594 2007-03-14  Alan Modra  <amodra@bigpond.net.au>
1595
1596         PR 4029
1597         * write.c (relax_segment): Insert extra alignment padding
1598         to break infinite relax loop when given impossible
1599         gcc_except_table assembly.
1600
1601 2007-03-12  H.J. Lu  <hongjiu.lu@intel.com>
1602
1603         * config/tc-i386.c (md_assemble): Use Opcode_XXX instead of XXX
1604         on i.tm.base_opcode.
1605         (match_template): Likewise.
1606         (process_operands): Use ~0x3 mask to match MOV_AX_DISP32.
1607
1608         * config/tc-i386.h (Opcode_D): New.
1609         (Opcode_FloatR): Likewise.
1610         (Opcode_FloatD): Likewise.
1611         (D): Redefined.
1612         (W): Likewise.
1613         (FloatMF): Likewise.
1614         (FloatR): Likewise.
1615         (FloatD): Likewise.
1616
1617 2007-03-09  Alexandre Oliva  <aoliva@redhat.com>
1618
1619         * app.c (do_scrub_chars): Recognize comments after # line "file".
1620         * read.c (get_linefile_number): New.
1621         (s_app_line): Accept ill-formed .linefile lines as comments.
1622
1623 2007-03-09  Alan Modra  <amodra@bigpond.net.au>
1624
1625         * config/tc-i386.h (WORKING_DOT_WORD): Define.
1626
1627 2007-03-09  Alexandre Oliva  <aoliva@redhat.com>
1628
1629         * app.c (do_scrub_chars): Turn #<line>"file"flags into .linefile.
1630         * as.h (new_logical_line_flags): New.
1631         * input-scrub.c (new_logical_line): Turned into wrapper for...
1632         (new_logical_line_flags): this.  Handle flags.
1633         * read.c (potable): Add linefile.  Adjust appline argument.
1634         (s_app_file): Fake .appfiles no more.
1635         (s_app_line): For .linefile, accept file name and flags.
1636
1637 2007-03-08  Alan Modra  <amodra@bigpond.net.au>
1638
1639         * symbols.c (symbol_relc_make_sym): Comment typo fixes.
1640
1641 2007-03-08  Alan Modra  <amodra@bigpond.net.au>
1642
1643         * Makefile.am: Run "make dep-am".
1644         * Makefile.in: Regenerate.
1645         * po/POTFILES.in: Regenerate.
1646
1647 2007-03-07  Joseph Myers  <joseph@codesourcery.com>
1648
1649         * configure.in (REPORT_BUGS_TEXI): Define to Texinfo version of
1650         bug-reporting URL.
1651         * doc/Makefile.am (gasver.texi): Define BUGURL.
1652         * doc/as.texinfo: Use BUGURL.
1653         * Makefile.in, configure, doc/Makefile.in: Regenerate.
1654
1655 2007-03-06  Andreas Krebbel  <krebbel1@de.ibm.com>
1656
1657         * config/tc-s390.c (md_parse_option): z9-ec option added.
1658
1659 2007-03-02  Paul Brook  <paul@codesourcery.com>
1660
1661         * config/tc-arm.c (relax_immediate): Always return positive values.
1662         (relaxed_symbol_addr): New function.
1663         (relax_adr, relax_branch): Use it.
1664         (arm_relax_frag): Pass strect argument.  Adjust infinite loop check.
1665
1666 2007-03-01  Joseph Myers  <joseph@codesourcery.com>
1667
1668         * as.c (parse_args): Update copyright date.
1669
1670 2007-02-28  Nathan Sidwell  <nathan@codesourcery.com>
1671
1672         * configure.tgt (sh-*-uclinux, sh[12]-*-uclinux): Specify as elf.
1673
1674 2007-02-28  Nick Clifton  <nickc@redhat.com>
1675
1676         PR gas/3797
1677         * config/tc-d10v.c (do_assemble): Do not generate error messages,
1678         just return -1 whenever a problem is encountered.
1679         (md_assemble): If do_assemble returns -1 generate a non-fatal
1680         error message and return.
1681
1682         PR gas/2623
1683         * config/tc-msp430.c (line_separator_char): Change to '{'.
1684
1685 2007-02-27  Alan Modra  <amodra@bigpond.net.au>
1686
1687         * config/tc-m68hc11.c (fixup24): Correct fixup size.
1688         (build_jump_insn): Likewise.
1689         (build_insn): Likewise.
1690         (s_m68hc11_relax): Likewise.
1691
1692 2007-02-27  Alan Modra  <amodra@bigpond.net.au>
1693
1694         * config/obj-elf.c (elf_frob_file): frag_wane any new frags.
1695
1696 2007-02-25  Mark Shinwell  <shinwell@codesourcery.com>
1697
1698         * config/tc-arm.c (do_vfp_nsyn_pop): Use fldmias/fldmiad.
1699
1700 2007-02-23  Alan Modra  <amodra@bigpond.net.au>
1701
1702         * config/tc-mn10300.c (md_convert_frag): Correct fixup size.
1703         (md_assemble): Likewise.
1704
1705 2007-02-22  Alan Modra  <amodra@bigpond.net.au>
1706
1707         * write.c (size_seg): Always clear SEC_RELOC here.
1708         (install_reloc): New function, extracted from..
1709         (write_relocs): ..here.  Combine RELOC_EXPANSION_POSSIBLE code
1710         with !RELOC_EXPANSION_POSSIBLE code.  Don't add fr_offset when
1711         testing frag size.  Set SEC_RELOC here.
1712
1713 2007-02-21  Alan Modra  <amodra@bigpond.net.au>
1714
1715         PR 4082
1716         * config/tc-avr.h (TC_FX_SIZE_SLACK): Define.
1717
1718 2007-02-20  Thiemo Seufer  <ths@mips.com>
1719
1720         * doc/c-mips.texi: Document 74kc, 74kf, 74kx.
1721
1722 2007-02-20  Thiemo Seufer  <ths@mips.com>
1723
1724         * config/tc-mips.c (mips_cpu_info_table): Add 74K configurations.
1725
1726 2007-02-20  Thiemo Seufer  <ths@mips.com>
1727             Chao-Ying Fu  <fu@mips.com>
1728
1729         * config/tc-mips.c (mips_set_options, mips_opts, file_ase_dspr2,
1730         ISA_SUPPORTS_DSPR2_ASE, MIPS_CPU_ASE_DSPR2): Add DSP R2 ASE support.
1731         (macro_build): Add case '2'.
1732         (macro): Expand M_BALIGN to nop, packrl.ph or balign.
1733         (validate_mips_insn): Add support for balign instruction.
1734         (mips_ip): Handle DSP R2 instructions. Support balign instruction.
1735         (OPTION_DSPR2, OPTION_NO_DSPR2, OPTION_COMPAT_ARCH_BASE,
1736         md_parse_option, mips_after_parse_args): Add -mdspr2 and -mno-dspr2
1737         command line options.
1738         (s_mipsset): Add support for .set dspr2 and .set nodspr2 directives.
1739         (md_show_usage): Add -mdspr2 and -mno-dspr2 help output.
1740         * doc/c-mips.texi, doc/as.texinfo: Document -mdspr2, -mno-dspr2,
1741         .set dspr2, .set nodspr2.
1742
1743 2007-02-20  Nathan Sidwell  <nathan@codesourcery.com>
1744
1745         * config/tc-m68k.c (mcf5210a_ctrl, mcf52235_ctrl, mcf5225_ctrl): New.
1746         (m68k_cpus): Add 5210a..5211a, 52230..52235 5224..5225.
1747
1748 2007-02-18  Alan Modra  <amodra@bigpond.net.au>
1749
1750         * write.c (TC_FX_SIZE_SLACK): Define.
1751         (write_relocs): Reinstate check for fixup within frag.
1752         * config/tc-bfin.h (TC_FX_SIZE_SLACK): Define.
1753         * config/tc-h8300.h (TC_FX_SIZE_SLACK): Define.
1754         * config/tc-mmix.h (TC_FX_SIZE_SLACK): Define.
1755         * config/tc-sh.h (TC_FX_SIZE_SLACK): Define.
1756         * config/tc-xstormy16.h (TC_FX_SIZE_SLACK): Define.
1757
1758 2007-02-17  Mark Mitchell  <mark@codesourcery.com>
1759             Nathan Sidwell  <nathan@codesourcery.com>
1760             Vladimir Prus  <vladimir@codesourcery.com
1761             Joseph Myers  <joseph@codesourcery.com>
1762
1763         * configure.in (--with-bugurl): New option.
1764         * configure: Regenerate.
1765         * dep-in.sed: Remove bin-bugs.h.
1766         * Makefile.am (REPORT_BUGS_TO): Define.
1767         (INCLUDES): Define REPORT_BUGS_TO.
1768         (DEP_INCLUDES): Likewise.
1769         ($(OBJS)): No longer depend on bin-bugs.h.
1770         * Makefile.in: Regenerate.
1771         * doc/Makefile.in: Regenerate.
1772         * as.c (show_usage): Don't print empty REPORT_BUGS_TO.
1773         * as.h: Remove include of bin-bugs.h.
1774
1775 2007-02-17  Alan Modra  <amodra@bigpond.net.au>
1776
1777         * write.c: White space fixes.
1778         (fixup_segment): Move symbol_mri_common_p adjustments..
1779         (write_relocs): ..and symbol_equated_reloc_p adjustments..
1780         (adjust_reloc_syms): ..to here.
1781
1782 2007-02-16  Alan Modra  <amodra@bigpond.net.au>
1783
1784         * subsegs.c (subseg_change, subseg_get): Use xcalloc rather than
1785         xmalloc, memset.  Don't bother assigning NULL to known zero mem.
1786         (subseg_set_rest): Remove unnecessary cast.
1787         * write.c: Include libbfd.h.  Replace PTR with void * throughout.
1788         Remove unnecessary forward declarations and casts.
1789         (set_symtab): Delete extern bfd_alloc.
1790         (fixup_segment): Move.
1791
1792 2007-02-15  Nathan Sidwell  <nathan@codesourcery.com>
1793
1794         * config/m68k-parse.h (m68k_register): Add ROMBAR0, ASID.
1795         * config/tc-m68k.c (mcfv4e_ctrl): Add ColdFire specific names.
1796         (mcf5475_ctrl, mcf5485_ctrl): New.
1797         (m68k_cpus): Use mcf5485_ctrl and mcf5485_ctrl for those families.
1798         (m68k_ip): Add ASID, MMUBAR, ROMBAR0 handling.
1799         (init_table): Add asid, mmubar, adjust rombar0.
1800
1801 2007-02-14  Alan Modra  <amodra@bigpond.net.au>
1802
1803         * config/tc-i386.h (Seg2ShortForm, Seg3ShortForm): Delete.
1804         * config/tc-i386.c: Wrap overly long lines, whitespace fixes.
1805         (process_operands): Move old Seg2ShortForm and Seg3ShortForm
1806         code, and test for these insns using a combination of
1807         opcode_modifier and operand_types.
1808
1809 2007-02-07  Paul Brook  <paul@codesourcery.com>
1810
1811         * configure.tgt: Add arm*-*-uclinux-*eabi.
1812
1813 2007-02-05  Dave Brolley  <brolley@redhat.com>
1814             Richard Sandiford  <rsandifo@redhat.com>
1815             DJ Delorie  <dj@redhat.com>
1816             Stan Cox  <scox@redhat.com>
1817             Jim Blandy  <jimb@redhat.com>
1818             Nick Clifton  <nickc@redhat.com>
1819             Jim Wilson  <wilson@redhat.com>
1820             Frank Ch. Eigler  <fche@redhat.com>
1821             Graydon Hoare  <graydon@redhat.com>
1822             Ben Elliston  <bje@redhat.com>
1823             John Healy  <jhealy@redhat.com>
1824             Richard Henderson  <rth@redhat.com>
1825
1826         * Makefile.am (CPU_TYPES): Add mep.
1827         (TARGET_CPU_CFILES): Add tc-mep.c.
1828         (TARGET_CPU_HFILES): Add tc-mep.h.
1829         (DEPTC_mep_elf): New variable.
1830         (DEPTC_mep_coff): Likewise.
1831         (DEPOBJ_mep_coff, DEPOBJ_mep_elf, DEP_mep_coff, DEP_mep_elf): Likewise.
1832         * configure.in: Support mep.
1833         * configure.tgt: Likewise.
1834         * config/tc-mep.c: New file.
1835         * config/obj-elf.c: New file.
1836         * config/tc-mep.c: New file.
1837         * config/tc-mep.h: New file.
1838         * testsuite/gas/mep: New testsuite with content.
1839         * Makefile.in: Regenerate.
1840         * configure: Regenerate.
1841
1842 2007-02-05  Dave Brolley  <brolley@redhat.com>
1843
1844         * cgen.c (gas_cgen_install_complex_reloc): Removed.
1845         (complex_reloc_installation_howto): Removed.
1846
1847 2007-02-05  Dave Brolley  <brolley@redhat.com>
1848             Graydon Hoare  <graydon@redhat.com>
1849             DJ Delorie  <dj@redhat.com>
1850             Catherine Moore  <clm@redhat.com>
1851             Michael Chastain  <chastain@redhat.com>
1852             Frank Ch. Eigler  <fche@redhat.com>
1853
1854         * symbols.c (use_complex_relocs_for): New, to decide
1855         when to use complex relocs. Add signed RELC support.
1856         (resolve_symbol_value): Call use_complex_relocs_for. Unconditionally
1857         encode expression symbols as mangled complex relocation symbols (when
1858         compiled with -DOBJ_COMPLEX_RELOC).
1859         (symbol_relc_make_sym,value,expr): New traversal/conversion routines.
1860         * cgen.c (gas_cgen_md_apply_fix3):  Only set signed_p if RELC. Call
1861         encode_addend with new args. Modify to get start, length from
1862         ifield whenever it is set. Also change condition on which
1863         self-describing relocs are encoded. Add hook into
1864         gas_cgen_encode_addend.
1865         (queue_fixup_recursively): Add signed RELC support. Change from masked
1866         expr to trunc flag. Restore assignment of sub-field value to
1867         temporary in fixups array. Reflect changed meaning of last arg to
1868         queue_fixup_recursively.
1869         (fixup): Add cgen_maybe_multi_ifield member.
1870         (make_right_shifted_expr): New function.
1871         (queue_fixup): Change to recursive function that fragments
1872         fixups if operand has a multi-ifield.
1873         (gas_cgen_parse_operand): Add RELC code to wrap expressions in
1874         symbols, call weak_operand_overflow_check, and fragment call
1875         queue_fixup with operand fields.
1876         (gas_cgen_finish_insn) Modify to manage ifield pointer.
1877         (weak_operand_overflow_check): New function to try to select
1878         insns correctly.
1879         (gas_cgen_encode_addend): New function for relc.
1880         (gas_cgen_install_complex_reloc): Likewise.
1881         (gas_cgen_tc_gen_reloc): Add hook into gas_cgen_install_complex_reloc.
1882         * write.h (struct fix): Add msb_field_p to fx_cgen sub-struct. Add
1883         cgen_maybe_multi_ifield field to fx_cgen substructure.
1884         * cgen.h (GAS_CGEN_MAX_FIXUPS): Bump from 3 up to 32.
1885         * symbols.h (symbol_relc_make_sym,value,expr): New prototypes.
1886
1887 2007-02-03  DJ Delorie  <dj@delorie.com>
1888
1889         * config/tc-m32c.c (m32c_cons_fix_new): New.  Added to support 3
1890         byte relocs.
1891         * config/tc-m32c.h (TC_CONS_FIX_NEW): Define.
1892         (m32c_cons_fix_new): Prototype.
1893
1894 2007-02-02  Bob Wilson  <bob.wilson@acm.org>
1895
1896         * config/tc-xtensa.c (xg_build_to_insn): Use tinsn_init.
1897         (xg_expand_assembly_insn, istack_push_space, istack_pop): Likewise.
1898
1899 2007-02-02  Bob Wilson  <bob.wilson@acm.org>
1900
1901         * config/tc-xtensa.c (SUFFIX_MAP, suffix_relocs): New.
1902         (xtensa_elf_suffix): Use suffix_relocs instead of local mapping table.
1903         (map_suffix_reloc_to_operator): New.
1904         (map_operator_to_reloc): New.
1905         (expression_maybe_register): Fix incorrect test of return value from
1906         xtensa_elf_suffix.  Rearrange to use map_suffix_reloc_to_operator.
1907         (xg_assemble_literal, convert_frag_immed): Use map_operator_to_reloc.
1908
1909 2007-02-02  Bob Wilson  <bob.wilson@acm.org>
1910
1911         * config/xtensa-istack.h (struct tinsn_struct): Delete fixup field.
1912         (tinsn_get_tok): Delete prototype.
1913         * config/tc-xtensa.c (tinsn_get_tok): Delete.
1914
1915 2007-02-02  Bob Wilson  <bob.wilson@acm.org>
1916
1917         * config/xtensa-relax.h (struct build_instr): Delete id field.
1918         * config/xtensa-relax.c (widen_spec_list): Remove zeros from LITERAL
1919         and LABEL tokens.
1920         (append_literal_op, append_label_op): Remove litnum/labnum arguments;
1921         set op_data fields to zero.
1922         (parse_id_constant): Delete.
1923         (build_transition): Remove code to handle numbered literals and labels.
1924
1925 2007-02-02  Bob Wilson  <bob.wilson@acm.org>
1926
1927         * config/xtensa-relax.c (build_transition): Remove code after as_fatal.
1928         (build_transition_table): Likewise.
1929
1930 2007-02-01  Bob Wilson  <bob.wilson@acm.org>
1931
1932         * config/tc-xtensa.c (xg_add_opcode_fix, md_apply_fix): Delete use of
1933         fx_tcbit.
1934         * config/tc-xtensa.h (TC_FORCE_RELOCATION_LOCAL): Remove.
1935
1936 2007-02-02  Alan Modra  <amodra@bigpond.net.au>
1937
1938         * write.h (struct fix <fx_pcrel_adjust, fx_size>): Move.
1939         (struct fix <fx_plt>): Rename to tcbit2.
1940         * write.c (fix_new_internal): Adjust.
1941         (TC_FORCE_RELOCATION_LOCAL): Don't test fx_plt.
1942         * config/tc-arm.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1943         * config/tc-cris.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1944         * config/tc-i386.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1945         * config/tc-i960.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1946         * config/tc-sh.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1947         * config/tc-sh64.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1948         * config/tc-sparc.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1949         * config/tc-msp430.c (msp430_force_relocation_local): Likewise.
1950         * config/tc-ia64.c (emit_one_bundle): Don't set fx_plt.
1951         * config/tc-ia64.h (TC_FORCE_RELOCATION_LOCAL): Don't test fx_plt.
1952         Instead, compare fx_r_type.
1953         * config/tc-xtensa.c (xg_add_opcode_fix, md_apply_fix): Use
1954         fx_tcbit in place of fx_plt.
1955         * config/tc-xtensa.h (TC_FORCE_RELOCATION_LOCAL): Define.
1956         * doc/internals.texi (TC_FORCE_RELOCATION_LOCAL): Remove reference
1957         to fx_plt.
1958
1959 2007-01-30  Nick Clifton  <nickc@redhat.com>
1960
1961         * as.c (main): Mark symbols created via the --defsym command line
1962         option as volatile so that they can be overridden later on by a
1963         .set directive.  This maintains compatibility with the behaviour
1964         of earlier versions of the assembler.
1965         * doc/as.texinfo (--defsym): Document that the defined symbol's
1966         value can be overridden via a .set directive.
1967
1968 2007-01-28  H.J. Lu  <hongjiu.lu@intel.com>
1969
1970         * config/tc-i386.c (swap_imm_operands): Renamed to ...
1971         (swap_2_operands): This.  Take 2 ints.
1972         (md_assemble): Updated.
1973         (swap_operands): Call swap_2_operands to swap 2 operands.
1974
1975 2007-01-24  DJ Delorie  <dj@redhat.com>
1976
1977         * config/tc-m32c.c (md_pseudo_table): Add .3byte.
1978
1979 2007-01-22  Nick Clifton  <nickc@redhat.com>
1980
1981         PR gas/3871
1982         * tc-score.c: Remove unnecessary uses of _().
1983         Make the err_msg[] a file level local array in order to save
1984         storage space.
1985         Remove unnecessary sprintf()s.
1986
1987 2007-01-18  Mei Ligang  <ligang@sunnorth.com.cn>
1988
1989         PR gas/3871
1990         * config/tc-score.c : Using _() for const string.
1991         Do not assign inst.error with a local string pointer.
1992         (md_section_align): Pad section.
1993
1994 2007-01-13  H.J. Lu  <hongjiu.lu@intel.com>
1995
1996         * config/tc-i386.c (build_modrm_byte): Check number of operands
1997         when procssing memory/register operand.
1998
1999 2007-01-12  Nick Clifton  <nickc@redhat.com>
2000
2001         PR gas/3856
2002         * macro.c (expand_irp): Do not ignore spaces inside quoted
2003         strings.
2004
2005 2007-01-12  Alan Modra  <amodra@bigpond.net.au>
2006
2007         * config/tc-spu.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
2008         * config/tc-m32r.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
2009         * config/tc-mn10300.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
2010         (TC_FORCE_RELOCATION): Define.
2011         (TC_FORCE_RELOCATION_LOCAL): Define.
2012         * config/tc-mn10300.c (mn10300_fix_adjustable): Adjust.
2013
2014 2007-01-12  Alan Modra  <amodra@bigpond.net.au>
2015
2016         * input-file.c (input_file_open): Check fgets return.
2017
2018 2007-01-11  Paul Brook  <paul@codesourcery.com>
2019
2020         * config/tc-arm.c (do_t_add_sub): Use Rd and Rs.
2021
2022 2007-01-11  Nick Clifton  <nickc@redhat.com>
2023
2024         PR gas/3707
2025         * config/tc-arm.c (md_begin): Cope with an NULL mcpu_fpu_opt
2026         variable.
2027
2028         * config/tc-mcore.c (md_number_to_chars): Use
2029         number_to_chars_{big|little}endian.
2030
2031 2007-01-08  Kazu Hirata  <kazu@codesourcery.com>
2032
2033         * config/tc-m68k.c (m68k_archs, m68k_cpus): Treat Fido as an
2034         architecture by itself.
2035         (m68k_ip): Don't issue a warning for tbl instructions on fido.
2036         (m68k_elf_final_processing): Treat Fido as an architecture by
2037         itself.
2038
2039 2007-01-08  Kai Tietz   <kai.tietz@onevision.com>
2040
2041         * configure.tgt: Renamed target x86_64-*-mingw64 to x86_64-*-mingw*
2042
2043 2007-01-05  H.J. Lu  <hongjiu.lu@intel.com>
2044
2045         * config/tc-i386.c (set_intel_syntax): Update set_intel_syntax
2046         depending on allow_naked_reg.
2047
2048 2007-01-04  Paul Brook  <paul@codesourcery.com>
2049
2050         * config/tc-arm.c (do_cpsi): Set mmod bit for 2 argument form.
2051
2052 2007-01-04  H.J. Lu  <hongjiu.lu@intel.com>
2053
2054         PR gas/3830
2055         * config/tc-i386.c (register_prefix): New.
2056         (set_intel_syntax): Set set_intel_syntax to "" if register
2057         prefix isn't needed.
2058         (check_byte_reg): Use register_prefix for error message.
2059         (check_long_reg): Likewise.
2060         (check_qword_reg): Likewise.
2061         (check_word_reg): Likewise.
2062
2063 2007-01-04  Julian Brown  <julian@codesourcery.com>
2064
2065         * config/tc-arm.c (do_neon_shl_imm): Swap rN, rM.
2066         (do_neon_qshl_imm): Likewise.
2067         (do_neon_rshl): New function. Handle rounding variants of
2068         v{q}shl-by-register.
2069         (insns): Use do_neon_rshl for vrshl, vqrshl.
2070
2071 2007-01-04  Paul Brook  <paul@codesourcery.com>
2072
2073         * config/tc-arm.c (NEON_ENC_TAB): Fix encoding of vclt, vcle, vaclt
2074         and vacle.
2075
2076 2007-01-03  H.J. Lu  <hongjiu.lu@intel.com>
2077
2078         * config/tc-i386.c (swap_operands): Remove branches.
2079
2080 2007-01-03  H.J. Lu  <hongjiu.lu@intel.com>
2081
2082         * config/tc-i386.c: Update copyright year.
2083         * config/tc-i386.h: Likewise.
2084
2085 2007-01-03  H.J. Lu  <hongjiu.lu@intel.com>
2086
2087         * config/tc-i386.c (smallest_imm_type): Return unsigned int
2088         instead of int.
2089
2090 2007-01-03  H.J. Lu  <hongjiu.lu@intel.com>
2091
2092         * config/tc-i386.c: Convert to ISO C90 formatting
2093         * config/tc-i386.h: Likewise.
2094
2095 2007-01-03  David Daney  <ddaney@avtrex.com>
2096
2097         * config/tc-mips.c (md_show_usage):  Clean up -mno-shared
2098         documentation.
2099
2100 For older changes see ChangeLog-2006
2101 \f
2102 Local Variables:
2103 mode: change-log
2104 left-margin: 8
2105 fill-column: 74
2106 version-control: never
2107 End: