1 2008-09-08 John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
3 * config/tc-hppa.c (hppa_regname_to_dw2regnum): Add register name to
4 number support for 32-bit targets.
6 2008-09-08 Tristan Gingold <gingold@adacore.com>
8 * NEWS: Add a marker for the 2.19 features.
10 2008-09-07 John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
12 * config/tc-hppa.h (DIFF_EXPR_OK): Define for SOM target. Revise
13 comment regarding use of difference expressions.
14 (TC_FORCE_RELOCATION_SUB_LOCAL): Define to 1.
16 * dw2gencfi.c (CFI_DIFF_EXPR_OK): Define if not defined.
17 (dot_cfi_personality): Use CFI_DIFF_EXPR_OK instead of DIFF_EXPR_OK.
18 (dot_cfi_lsda, output_cie, output_fde): Likewise.
19 * config/tc-hppa.h (CFI_DIFF_EXPR_OK): Define.
21 2008-09-06 Richard Sandiford <rdsandiford@googlemail.com>
23 * config/tc-mips.h (DWARF2_FDE_RELOC_SIZE): Define.
25 2008-09-03 Nick Clifton <nickc@redhat.com>
27 * config/tc-i386.c (pe_lcomm_internal): New function. Allows the
28 alignment field of the .lcomm directive to be optional.
29 (pe_lcomm): New function. Pass pe_lcomm_internal to
31 (md_pseudo_table): Implement .lcomm directive for COFF based
33 * doc/c-i386.texi (i386-Directives): New node. Used to document
36 2008-08-30 John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
38 * config/tc-hppa.h: Don't define DWARF2_EH_FRAME_READ_ONLY on Linux
41 2008-08-29 Eric B. Weddington <eric.weddington@atmel.com>
43 * config/tc-avr.c (mcu_types): Add atmega16u4.
44 * doc/c-avr.texi: Likewise.
46 2008-08-28 H.J. Lu <hongjiu.lu@intel.com>
48 * config/tc-ia64.c (CR_IIB0): New.
50 (cr): Add cr.iib0 and cr.iib1.
51 (specify_resource): Handle IA64_RS_CR_IIB and CR_IIB0/CR_IIB1.
53 2008-08-28 Jan Beulich <jbeulich@novell.com>
55 * config/tc-i386.c (md_assemble): Force number of displacement
56 operands to zero when processing string instruction.
57 (i386_index_check): Special-case string instruction operands. Don't
58 fudge address prefix if there already was a memory operand. Fix
59 error message to correctly reflect the addressing mode used.
60 (i386_att_operand): Fix comment.
61 (i386_intel_operand): Snapshot, clear, and restore base and index
62 reg for each operand processed. Increment count of memory operands
65 2008-08-27 John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
67 * config/tc-hppa.c (is_SB_relative): New macro.
68 (fix_new_hppa): Remove $segrel$ marker.
69 (cons_fix_new_hppa): Set reloc type R_PARISC_SEGREL32 if expression is
71 * config/tc-hppa.h (tc_frob_symbol): Check for $segrel$.
73 2008-08-27 Jan Beulich <jbeulich@novell.com>
75 * config/tc-i386.c (check_string): Use register_prefix for error
77 (process_operands): Likewise.
79 2008-08-26 Mark Mitchell <mark@codesourcery.com>
81 * c-arm.texi: Add tutorial on ARM unwinding pseudo ops.
83 2008-08-26 Jie Zhang <jie.zhang@analog.com>
85 * config/bfin-parse.y (check_macfunc_option): Fix instruction
87 (asm_1): Check mode for 16-bit multiply instructions.
89 2008-08-24 Alan Modra <amodra@bigpond.net.au>
91 * configure.in: Update a number of obsolete autoconf macros.
92 * configure: Regenerate.
93 * aclocal.m4: Regenerate.
95 2008-08-22 Nick Clifton <nickc@redhat.com>
97 * config/tc-mcore.c (md_assemble): Increase length of name array
98 to include terminating NUL.
100 2008-08-22 Jie Zhang <jie.zhang@analog.com>
102 * config/bfin-lex.l (NUMBER): Protect special `.'.
104 2008-08-22 Alan Modra <amodra@bigpond.net.au>
106 * symbols.c (symbol_clone): Ensure clones are not external.
108 2008-08-22 Alan Modra <amodra@bigpond.net.au>
110 * config/tc-hppa.c (md_begin): Set BSF_KEEP for "dummy_symbol".
112 2008-08-21 Richard Henderson <rth@redhat.com>
114 * dw2gencfi.c (DWARF2_FDE_RELOC_SIZE): New.
115 (output_cie, output_fde): Use it.
116 (DWARF2_EH_FRAME_READ_ONLY): New.
117 (cfi_finish): Use it.
119 * config/tc-hppa.h (DWARF2_FDE_RELOC_SIZE): Set to 8 for 64-bit.
120 (DWARF2_CIE_DATA_ALIGNMENT): Change sign.
121 (DWARF2_EH_FRAME_READ_ONLY): New.
122 * config/tc-hppa.c (tc_gen_reloc): Generate pc-relative relocations
123 from the results of DIFF_EXPR_OK manipulation.
125 2008-08-21 Sterling Augustine <sterling@tensilica.com>
127 * config/xtensa-istack.h (MAX_INSN_ARGS): Increase to 64.
129 2008-08-20 Bob Wilson <bob.wilson@acm.org>
131 * config/tc-xtensa.c (O_tlsfunc, O_tlsarg, O_tlscall): Define.
132 (O_tpoff, O_dtpoff): Define.
133 (suffix_relocs): Add entries for TLS suffixes.
134 (xtensa_elf_cons): Check for invalid use of TLS relocations.
135 (map_operator_to_reloc): Add is_literal parameter and use it to
136 control translating TLS instruction relocations to the corresponding
138 (xg_valid_literal_expression): Allow TLS operators.
139 (xg_build_to_insn): Copy TLS operators from pseudo-instruction
140 operands to generated literals.
141 (xg_assemble_literal): Handle TLS operators. Update call to
142 map_operator_to_reloc.
143 (md_assemble): Handle CALLXn.TLS pseudo-instruction.
144 (md_apply_fix): Handle TLS relocations.
145 (emit_single_op): Handle TLS operators.
146 (convert_frag_immed): Update call to map_operator_to_reloc.
147 (vinsn_to_insnbuf): Emit relocations for TLS-related instructions.
148 * config/xtensa-istack.h (tinsn_struct): Add tls_reloc field.
149 * config/xtensa-relax.c (append_literal_op): Add src_op parameter
150 to initialize the op_data field of the BuildOp.
151 (build_transition): Use it here to record the source operand
152 corresponding to a generated literal.
153 * config/xtensa-relax.h (build_op): Comment op_data use for literals.
155 2008-08-20 H.J. Lu <hongjiu.lu@intel.com>
157 AVX Programming Reference (August, 2008)
158 * config/tc-i386.c (CPU_FLAGS_AES_MATCH): New.
159 (CPU_FLAGS_AVX_MATCH): Likewise.
160 (CPU_FLAGS_32BIT_MATCH): Updated.
161 (cpu_flags_match): Likewise.
163 2008-08-20 Alan Modra <amodra@bigpond.net.au>
166 * write.c (install_reloc): Check that reloc symbols have been
168 (set_symtab): Mark symbols with BSF_KEEP.
170 2008-08-18 H.J. Lu <hongjiu.lu@intel.com>
172 * config/tc-i386.c (i386_align_code): Fix a comment typo.
174 2008-08-15 Alan Modra <amodra@bigpond.net.au>
177 * configure.in: Invoke AC_USE_SYSTEM_EXTENSIONS.
178 * Makefile.in: Regenerate.
179 * aclocal.m4: Regenerate.
180 * config.in: Regenerate.
181 * configure: Regenerate.
182 * doc/Makefile.in: Regenerate.
184 2008-08-14 Alan Modra <amodra@bigpond.net.au>
186 * config/tc-tic4x.c (tic4x_operands_parse): Make static.
188 2008-08-13 Ben Elliston <bje@au.ibm.com>
190 * doc/as.texinfo (Align): Document the PowerPC behaviour.
192 2008-08-13 Alan Modra <amodra@bigpond.net.au>
194 * as.c, as.h, ecoff.c, hash.c, macro.c, symbols.c, config/obj-evax.c,
195 config/obj-som.c, config/tc-alpha.c, config/tc-arm.c, config/tc-bfin.c,
196 config/tc-bfin.h, config/tc-crx.c, config/tc-frv.c, config/tc-frv.h,
197 config/tc-hppa.h, config/tc-i386.c, config/tc-i860.c, config/tc-i960.h,
198 config/tc-ia64.c, config/tc-ia64.h, config/tc-m32c.c, config/tc-m32c.h,
199 config/tc-m68k.c, config/tc-maxq.c, config/tc-s390.c, config/tc-s390.h,
200 config/tc-sparc.c, config/tc-sparc.h, config/tc-spu.c, config/tc-spu.h,
201 config/tc-tic4x.c, config/tc-tic4x.h, config/tc-tic54x.c,
202 config/tc-tic54x.h, config/tc-vax.c, doc/internals.texi: Banish PARAMS
203 and PTR. Convert to ISO C. Delete unnecessary forward declarations.
205 2008-08-12 Alan Modra <amodra@bigpond.net.au>
207 * config/tc-arm.c (s_unreq): Adjust hash_delete call.
208 * config/tc-ia64.c (dot_rot): Likewise.
210 2008-08-11 Alan Modra <amodra@bigpond.net.au>
213 * hash.c: Expand PTR to void *.
214 (hash_delete): Add "freeme" parameter. Call obstack_free.
215 * hash.h: Expand PTR to void *.
216 (hash_delete): Update prototype.
217 * macro.c (macro_expand_body): hash_delete LOCALs from formal_hash.
218 * config/tc-tic54x.c (tic54x_remove_local_label): Update hash_delete
220 (subsym_substitute): Likewise.
221 * doc/internals.texi (hash_delete): Update.
223 2008-08-08 Anatoly Sokolov <aesok@post.ru>
225 * config/tc-avr.c (mcu_types): Add avr25, avr31, avr35, and avr51
226 architectures. Reorganize list to put mcu types in correct
227 architectures and to order list same as in GCC. Use new ISA
228 definitions in include/opcode/avr.h.
229 * doc/c-avr.texi: Add avr25, avr31, avr35, and avr51 architecture
230 descriptions. Reorganize descriptions to put mcu types in correct
231 architectures and to order lists same as in GCC.
233 2008-08-08 Richard Sandiford <rdsandiford@googlemail.com>
234 Daniel Jacobowitz <dan@codesourcery.com>
236 * config/tc-mips.c (OPTION_CALL_NONPIC): New macro.
237 (OPTION_NON_SHARED, OPTION_XGOT, OPTION_MABI, OPTION_32)
238 (OPTION_N32, OPTION_64, OPTION_MDEBUG, OPTION_NO_MDEBUG)
239 (OPTION_PDR, OPTION_NO_PDR, OPTION_MVXWORKS_PIC): Bump by 1.
240 (md_longopts): Add -call_nonpic.
241 (md_parse_option): Handle OPTION_CALL_NONPIC.
242 (md_show_usage): Add -call_nonpic.
244 2008-08-08 Sterling Augustine <sterling@tensilica.com>
246 * config/tc-xtensa.c (exclude_section_from_property_tables): New.
247 (xtensa_create_property_segments): Use it.
248 (xtensa_create_xproperty_segments): Likewise.
250 2008-08-08 Alan Modra <amodra@bigpond.net.au>
252 * doc/internals.texi (DWARF2_FORMAT): Update for 2008-08-04 change.
254 2008-08-06 Richard Sandiford <rdsandiford@googlemail.com>
256 * config/tc-mips.c (mips16_reloc_p, got16_reloc_p, hi16_reloc_p)
257 (lo16_reloc_p): New functions.
258 (reloc_needs_lo_p): Use hi16_reloc_p and got16_reloc_p to
259 generalize relocation checks.
260 (matching_lo_reloc): New function.
261 (fixup_has_matching_lo_p): Use it.
262 (mips16_mark_labels): Don't clobber a symbol's visibility.
263 (append_insn): Use hi16_reloc_p and lo16_reloc_p.
264 (mips16_ip): Handle BFD_RELOC_MIPS16_GOT16 and BFD_RELOC_MIPS16_CALL16.
265 (md_apply_fix): Likewise.
266 (mips16_percent_op): Add %got and %call16.
267 (mips_frob_file): Use got16_reloc_p to generalize relocation checks.
268 Use matching_lo_reloc.
269 (mips_force_relocation): Use hi16_reloc_p and lo16_reloc_p to
270 generalize relocation checks.
271 (mips_fix_adjustable): Use lo16_reloc_p to generalize relocation
274 2008-08-06 DJ Delorie <dj@redhat.com>
276 * NEWS: Mention these changes.
278 * config/tc-h8300.h (H_TICK_HEX): Define.
279 * config/tc-h8300.c (OPTION_H_TICK_HEX): New.
280 (md_longopts): Add "-h-tick-hex".
281 (md_parse_option): Support it.
282 * doc/c-h8300.texi (H8/300 Options): Document it.
283 * doc/as.texinfo (Overview): Likewise.
285 * config/tc-sh.h (H_TICK_HEX): Define.
286 * config/tc-sh.c (OPTION_H_TICK_HEX): New.
287 (md_longopts): Add "-h-tick-hex".
288 (md_parse_option): Support it.
289 * doc/c-sh.texi (SH Options): Document it.
290 * doc/c-sh64.texi (SH64 Options): Document it.
291 * doc/as.texinfo (Overview): Likewise.
293 2008-08-05 Alan Modra <amodra@bigpond.net.au>
296 * dwarf2dbg.c (dwarf2_directive_file): Disable gas generated
297 debug info if we see compiler generated debug info.
298 (dwarf2_directive_loc): Likewise. Remove redundant debug_type test.
300 2008-08-04 Alan Modra <amodra@bigpond.net.au>
302 * dwarf2dbg.c: Remove superfluous forward function declarations.
303 (DWARF2_FORMAT): Add section arg.
304 (out_header): New function, split out from..
305 (out_debug_line): ..here.
306 (out_debug_aranges): Use out_header.
307 (out_debug_abbrev): Add info_seg and line_seg args. Use
308 DW_FORM_data8 (for DW_AT_stmt_list) if line_seg is 64-bit.
309 (out_debug_info): Use out_header. Output 8 byte DW_AT_stmt_list
310 if line_seg is 64-bit.
311 (dwarf2_finish): Adjust out_debug_abbrev call.
312 * config/tc-mips.h (DWARF2_FORMAT, mips_dwarf2_format): Add sec arg.
313 * config/tc-mips.c (mips_dwarf2_format): Likewise.
315 2008-08-04 Alan Modra <amodra@bigpond.net.au>
317 * Makefile.am (POTFILES.in): Set LC_ALL=C.
318 * Makefile.in: Regenerate.
319 * po/POTFILES.in: Regenerate.
321 2008-08-01 Peter Bergner <bergner@vnet.ibm.com>
323 * config/tc-ppc.c (parse_cpu): Rename altivec_or_spe to retain_flags.
324 Handle -mvsx and -mpower7.
325 (md_show_usage): Document -mpower7 and -mvsx.
326 * doc/as.texinfo (Target PowerPC): Document -mvsx.
327 * doc/c-ppc.texi (PowerPC-Opts): Document -mvsx and -mpower7.
329 2008-07-31 Peter Bergner <bergner@vnet.ibm.com>
331 * config/tc-ppc.c (parse_cpu) <power6>: Accept Altivec instructions.
334 2008-07-30 Michael J. Eager <eager@eagercon.com>
336 * config/tc-ppc.c (parse_cpu): Separate handling of -m403/405.
337 (md_show_usage): Likewise.
339 2008-07-30 Alan Modra <amodra@bigpond.net.au>
341 * messages.c, symbols.c, write.c: Silence gcc warnings.
343 2008-07-28 Ineiev <ineiev@yahoo.co.uk>
345 * config/tc-i386.c (operand_type_check): Warning fix.
347 2008-07-26 Michael Eager <eager@eagercon.com>
349 * doc/as.texinfo: Add description of single-precision attribute.
351 2008-07-24 Jie Zhang <jie.zhang@analog.com>
353 * config/bfin-parse.y (asm_1): Error if plain symbol is used
354 as load/store offset.
356 2008-07-22 Chao-ying Fu <fu@mips.com>
358 * config/tc-mips.c (mips_ip): Reset s to argsStart.
360 2008-07-22 Jie Zhang <jie.zhang@analog.com>
362 * config/tc-bfin.c (bfin_gen_loop): Remove loop symbol.
364 2008-07-21 DJ Delorie <dj@redhat.com>
366 * config/tc-h8300.c (fix_operand_size): Use the default size
367 specified by the .lbranch/.sbranch pseudos.
369 2008-07-18 DJ Delorie <dj@redhat.com>
371 * config/tc-m32c.h (H_TICK_HEX): Define.
372 * config/tc-m32c.c (OPTION_H_TICK_HEX): Define.
373 (md_longopts): Add support for it.
374 (md_parse_option): Likewise.
375 * doc/as.texinfo (Overview): Add new m32c options.
376 * doc/c-m32c.texi (M32C-Modifiers): Likewise
378 * as.h: (enable_h_tick_hex): New.
379 * app.c (enable_h_tick_hex): New.
381 (do_scrub_begin): Mark 'H' and 'h' as special if enable_h_tick_hex.
382 (do_scrub_chars): If enable_h_tick_hex and 'h', check for H'00
383 style hex constants and convert the input stream to 0x00 style.
384 (do_scrub_chars): If a 'X style character constant is found after
385 a symbol character (like you're or X'00), warn the user.
387 2008-07-10 Richard Sandiford <rdsandiford@googlemail.com>
389 * config/tc-mips.c (mips16_mark_labels): Use ELF_ST_SET_MIPS16.
390 (mips_fix_adjustable): Likewise.
391 (mips_frob_file_after_relocs): Likewise.
393 2008-07-08 Nathan Sidwell <nathan@codesourcery.com>
395 * config/tc-m68k.c (m68k_set_cpu, m68k_set_arch): Don't complain
396 about overriding an earlier setting.
398 2008-07-07 Adam Nemet <anemet@caviumnetworks.com>
400 * config/tc-mips.c (NO_ISA_COP): New macro.
401 (COP_INSN): New macro.
402 (is_opcode_valid): Use them.
403 (macro) <ld_st>: Use them. Don't accept coprocessor load store
404 insns based on the ISA if CPU is NO_ISA_COP.
405 <copz>: Likewise for coprocessor operations.
407 2008-07-07 Paul Brook <paul@codesourcery.com>
409 * config/tc-arm.c (arm_fix_adjustable): Don't adjust MOVW/MOVT
412 2008-07-07 Ralf Corsépius <ralf.corsepius@rtems.org>
414 * configure.tgt: Add bfin-*-rtems*.
416 2008-07-04 Alan Modra <amodra@bigpond.net.au>
418 * config/tc-spu.c (md_apply_fix): Handle fully resolved
419 BFD_RELOC_32_PCREL, BFD_RELOC_SPU_HI16 and BFD_RELOC_SPU_LO16.
421 2008-06-25 Peter Bergner <bergner@vnet.ibm.com>
423 * config/tc-ppc.c (parse_cpu): Handle -m464.
424 (md_show_usage): Likewise.
426 2008-06-24 Eric B. Weddington <eric.weddington@atmel.com>
428 Add support for ATtiny13A.
429 * config/tc-avr.c (mcu_types): Add attiny13a.
430 * doc/c-avr.texi: Likewise.
432 2008-06-24 Bob Wilson <bob.wilson@acm.org>
433 Alan Modra <amodra@bigpond.net.au>
435 * write.c (relax_segment <rs_org>): Include current stretch
436 value when calculating whether .org is backwards.
438 2008-06-17 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
440 * configure: Regenerate.
442 2008-06-17 Nick Clifton <nickc@redhat.com>
444 * app.c (do_scrub_chars): Do not UNGET an EOF value.
446 2008-06-16 Hans-Peter Nilsson <hp@bitrange.com>
449 * config/tc-mmix.c (s_loc): Assume "negative" addresses belong to
450 text_section. Do the "stepping backwards" test for text_section
451 using unsigned operands.
453 2008-06-13 Peter Bergner <bergner@vnet.ibm.com>
455 * config/tc-ppc.c (ppc_cpu): Use ppc_cpu_t typedef.
456 (ppc_insert_operand): Likewise.
457 (ppc_machine): Likewise.
458 * config/tc-ppc.h: #include "opcode/ppc.h"
459 (struct _ppc_fix_extra <ppc_cpu>): Use ppc_cpu_t typedef.
460 (ppc_cpu): Update extern decl.
462 2008-06-12 Adam Nemet <anemet@caviumnetworks.com>
464 * config/tc-mips.c (validate_mips_insn): Handle field descriptors
465 +x, +X, +p, +P, +s, +S.
468 * config/tc-mips.c (validate_mips_insn): Handle field descriptor +Q.
470 (macro_build): Likewise.
471 (CPU_HAS_SEQ): New macro.
472 (macro2) <M_SEQ_I, M_SNE_I>: Use it. Emit seq/sne and seqi/snei.
474 2008-06-09 Eric B. Weddington <eric.weddington@atmel.com>
476 * config/tc-avr.c (mcu_types): Remove support for ATmega32HVB device.
477 * doc/c-avr.texi: Likewise.
479 2008-06-04 Nick Clifton <nickc@redhat.com>
481 * app.c (do_scrub_chars): Do not UNGET an EOF value.
483 2008-06-03 H.J. Lu <hongjiu.lu@intel.com>
485 * config/tc-i386.c (set_sse_check): New.
486 (md_pseudo_table): Add "sse_check".
488 2008-06-03 Paul Brook <paul@codesourcery.com>
490 * config/tc-arm.c (do_t_rbit): Populate both rm fields.
492 2008-05-30 Nick Clifton <nickc@redhat.com>
495 * config/tc-avr.c (avr_ldi_expression): Do not warn about unknown
498 2008-05-29 Maxim Kuvyrkov <maxim@codesourcery.com>
500 * config/tc-mips.c (mips_cpu_info_table): Move records for
501 ST Loongson-2E/2F processors to a better place.
503 2008-05-23 H.J. Lu <hongjiu.lu@intel.com>
506 * config/tc-i386.c (match_template): Report ambiguous operand
507 size, not invalid suffix when there is no match in Intel
510 2008-05-22 Paul Brook <paul@codesourcery.com>
512 * config/tc-arm.c (parse_cond): Covert to lowercase before matching.
514 2008-05-21 I-Jui Sung <ijsung@gmail.com>
516 * config/tc-arm.c (arm_cpus): Add Faraday ARMv4 and ARMv5TE
517 compatible cores: fa526, fa626, fa626te, fa726te.
518 * doc/c-arm.texi (ARM Opts): Add -mcpu={fa526, fa626, fa626te,
521 2008-05-14 Alan Modra <amodra@bigpond.net.au>
523 * Makefile.am: Run "make dep-am".
524 * Makefile.in: Regenerate.
525 * doc/Makefile.in: Regenerate.
526 * po/POTFILES.in: Regenerate.
528 2008-05-09 Catherine Moore <clm@codesourcery.com>
530 * config/tc-mips.c (mips_frob_file): Don't match MIPS16 relocs
531 with non-MIPS16 relocs.
533 2008-05-09 Chao-ying Fu <fu@mips.com>
535 * config/tc-mips.c (md_begin): Use strncmp to compare TARGET_OS, in
536 case that some characters append at the end of the name.
538 (s_change_sec): Likewise.
539 (md_section_align): Likewise.
541 2008-05-07 Bob Wilson <bob.wilson@acm.org>
543 * config/tc-xtensa.c (xtensa_create_property_segments): Use
544 xtensa_make_property_section instead of xtensa_get_property_section.
545 (xtensa_create_xproperty_segments): Likewise.
547 2008-05-02 H.J. Lu <hongjiu.lu@intel.com>
549 * NEWS: Mention XSAVE, EPT and MOVBE.
551 * config/tc-i386.c (cpu_arch): Add .movbe and .ept.
552 (md_show_usage): Add .movbe and .ept.
554 * doc/c-i386.texi: Add movbe and ept to -march=. Document
557 2008-04-29 David S. Miller <davem@davemloft.net>
559 * config/tc-sparc.c (v9a_asr_table): Fix order of softint entries.
561 2008-04-28 Adam Nemet <anemet@caviumnetworks.com>
563 * config/tc-mips.c (file_mips_soft_float, file_mips_single_float):
565 (OPTION_ELF_BASE): Make room for new option macros.
566 (OPTION_SOFT_FLOAT, OPTION_HARD_FLOAT, OPTION_SINGLE_FLOAT,
567 OPTION_DOUBLE_FLOAT): New option macros.
568 (md_longopts): Add msoft-float, mhard-float, msingle-float and
570 (md_parse_option): Handle OPTION_SINGLE_FLOAT,
571 OPTION_DOUBLE_FLOAT, OPTION_SOFT_FLOAT and OPTION_HARD_FLOAT.
572 (md_show_usage): Add -msoft-float, -mhard-float, -msingle-float
574 (struct mips_set_options): New fields soft_float and single_float.
575 (mips_opts): Initialized them. Add comment for each field
577 (mips_after_parse_args): Set them based on file_mips_soft_float
578 and file_mips_single_float.
579 (s_mipsset): Add support for `.set softfloat', `.set hardfloat',
580 `.set singlefloat' and `.set doublefloat'.
581 (is_opcode_valid): New function to invoke OPCODE_IS_MEMBER.
582 Handle single-float and soft-float instructions here.
583 (macro_build, mips_ip): Use it instead of OPCODE_IS_MEMBER.
584 (is_opcode_valid_16): New function.
585 (mips16_ip): Use it instead of OPCODE_IS_MEMBER.
586 (macro) <M_LDC1_AB, M_SDC1_AB, M_L_DOB, M_L_DAB, M_S_DAB,
587 M_S_DOB>: Remove special-casing of r4650.
588 * doc/c-mips.texi (-march=): Add Octeon.
589 (MIPS Opts): Document -msoft-float and -mhard-float. Document
590 -msingle-float and -mdouble-float.
591 (MIPS floating-point): New section. Document `.set softfloat' and
592 `.set hardfloat'. Document `.set singlefloat' and `.set
595 2008-04-25 David S. Miller <davem@davemloft.net>
597 * config/tc-sparc.c: Accept 'softint_clear' and 'softint_set'
600 * doc/c-sparc.texi: Consistently refer to architecture 'versions',
601 rather than occaisionally 'levels'. Consistently refer to Sun's
602 UNIX variant as SunOS, every version of Solaris is also SunOS.
603 Document new 'softint_clear' and 'softint_set' aliases. Clarify
604 which architecture versions support '%dcr', '%cq', and '%gl'. Add
605 section on 32-bit/64-bit opcode translations.
607 2008-04-23 Mike Frysinger <vapier@gentoo.org>
609 * Makefile.am (OBJ_FORMAT_CFILES): Add config/obj-fdpicelf.c.
610 (OBJ_FORMAT_HFILES): Add config/obj-fdpicelf.h.
611 (obj-fdpicelf.o): Define.
612 * Makefile.in: Regenerate.
613 * configure.tgt: Set bfd_gas to yes when fmt is fdpicelf.
615 (bfin-*-linux-uclibc): New; set fmt to fdpicelf and em to linux.
616 (bfin-*-uclinux*): New; set fmt to elf and em to linux.
617 * config/obj-fdpicelf.c: New.
618 * config/obj-fdpicelf.h: Likewise.
619 * config/tc-bfin.c (bfin_flags, bfin_pic_flag): Set default based on
620 the OBJ_FDPIC_ELF define.
621 (OPTION_NOPIC): Define.
622 (md_longopts): Add mnopic and mno-fdpic.
623 (md_parse_option): Handle OPTION_NOPIC.
625 2008-04-23 Paolo Bonzini <bonzini@gnu.org>
627 * aclocal.m4: Regenerate.
628 * configure: Regenerate.
630 2008-04-23 David S. Miller <davem@davemloft.net>
632 * config/tc-sparc.c (v9a_asr_table): Add missing
633 'stick' and 'stick_cmpr', and document ordering rules
635 (tc_gen_reloc): Accept BFD_RELOC_SPARC_PC22 and
636 BFD_RELOC_SPARC_PC10.
637 * doc/c-sparc.texi: New section on Sparc constants.
638 Add documentation for %stick and %stick_cmpr.
640 2008-04-22 David S. Miller <davem@davemloft.net>
642 * config/obj-elf.c (obj_elf_section_type): Add prototype
643 before obj_elf_section_word and add 'warn' arg.
644 (obj_elf_section_word): Add type pointer arg, and if no #SECTION
645 is matched, try checking for #SECTION_TYPE.
646 (obj_elf_section): Adjust for new args.
647 (obj_elf_type_name): New function.
648 (obj_elf_type): Call it, and accept STT_foo number strings
649 in .type statements as output by SunPRO compiler.
651 2008-04-22 H.J. Lu <hongjiu.lu@intel.com>
653 * config/tc-i386.c (md_assemble): Don't check SSE instructions
656 2008-04-18 David S. Miller <davem@davemloft.net>
658 * doc/c-sparc.texi: Add syntax section.
660 2008-04-18 H.J. Lu <hongjiu.lu@intel.com>
662 * config/tc-i386.c (build_modrm_byte): Don't check FMA to swap
663 REG and NDS for instructions with immediate operand.
665 2008-04-18 H.J. Lu <hongjiu.lu@intel.com>
667 * config/tc-i386.c (build_modrm_byte): Swap REG and NDS for
670 2008-04-16 David S. Miller <davem@davemloft.net>
672 * config/tc-sparc.c (sparc_ip): Add support for gotdata mnemonics
673 and relocation generation.
674 (tc_gen_reloc): Likewise.
676 2008-04-15 Andrew Stubbs <andrew.stubbs@st.com>
678 * config/tc-sh.c (md_apply_fix): Make sure BFD_RELOC_SH_PCRELIMM8BY4
679 relocations are properly aligned, and not negative.
681 2008-04-15 Khem Raj <kraj@mvista.com>
683 * doc/tc-arm.texi: Fix fnstart and fnend directive names.
685 2008-04-14 Edmar Wienskoski <edmar@freescale.com>
687 * config/tc-ppc.c (parse_cpu): Handle "e500mc". Extend "e500" to
688 accept e500mc instructions.
689 (md_show_usage): Document -me500mc.
691 2008-04-11 Nick Clifton <nickc@redhat.com>
693 * listing.c (print_timestamp): Use localtime rather than
694 localtime_r since not all build environments provide the latter.
696 2008-04-10 H.J. Lu <hongjiu.lu@intel.com>
698 * NEWS: Mention -msse-check=[none|error|warning].
700 * config/tc-i386.c (sse_check): New.
701 (OPTION_MSSE_CHECK): Likewise.
702 (md_assemble): Check SSE instructions if needed.
703 (md_longopts): Add -msse-check.
704 (md_parse_option): Handle OPTION_MSSE_CHECK.
705 (md_show_usage): Show -msse-check=[none|error|warning].
707 * doc/c-i386.texi: Document -msse-check=[none|error|warning].
709 2008-04-10 Santiago Urueña <suruena@gmail.com>
711 * listing.c: Add -ag listing flag to show general information in
712 listings such as gas version, passed options, and time stamp.
713 (listing_general_info): New function.
714 (print_options): New function.
715 (print_single_option): New function.
716 (print_timestamp): New function.
717 (MAX_DATELEN): Define.
718 (listing_print): Add call to listing_general_info.
719 * listing.h (LISTING_GENERAL): Define.
720 (listing_print): Add new parameter.
721 * as.c (show_usage): Print new switch.
722 (parse_args): Parse new switch.
723 (main): Pass command line on to listing_print.
724 * NEWS: Mention this new feature.
725 * doc/as.texinfo: Document the new sub-option.
727 2008-04-08 Alan Modra <amodra@bigpond.net.au>
729 * dwarf2dbg.c (dwarf2_emit_insn): Simplify test before dwarf2_where
730 call. Delete out of date comment.
731 (dwarf2_consume_line_info): Always clear dwarf2_loc_directive_seen.
732 (dwarf2_emit_label): Don't emit unless there has been a previous
733 .file or we are outputting assembler generated debug.
734 dwarf2_consume_line_info after emitting line info, not before.
735 (out_debug_info): Simplify files_in_use test.
737 2008-04-07 H.J. Lu <hongjiu.lu@intel.com>
739 * config/tc-i386.c (parse_real_register): Return AVX register
740 only if AVX is enabled.
742 2008-04-07 Kaz Kojima <kkojima@rr.iij4u.or.jp>
745 * config/tc-sh64.c (shmedia_md_pcrel_from_section): Use
746 md_pcrel_from_section for BFD_RELOC_64 and BFD_RELOC_64_PCREL.
748 2008-04-04 Adrian Bunk <bunk@stusta.de>
749 Bob Wilson <bob.wilson@acm.org>
751 * config/tc-xtensa.c (xg_apply_fix_value): Check return code from
752 call to decode_reloc.
754 2008-04-04 H.J. Lu <hongjiu.lu@intel.com>
756 * NEWS: Mention XSAVE. Change CLMUL to PCLMUL.
758 * config/tc-i386.c (cpu_arch): Add .pclmul.
759 (md_show_usage): Replace clmul with pclmul.
760 * doc/c-i386.texi: Likewise.
762 2008-04-03 H.J. Lu <hongjiu.lu@intel.com>
764 * NEWS: Mention AES, CLMUL, AVX/FMA and -msse2avx.
766 * doc/c-i386.texi: Add avx, aes, clmul and fma to -march=.
767 Document -msse2avx, .avx, .aes, .clmul and .fma.
769 * config/tc-i386.c (YMMWORD_MNEM_SUFFIX): New.
770 (vex_prefix): Likewise.
772 (CPU_FLAGS_ARCH_MATCH): Likewise.
773 (CPU_FLAGS_64BIT_MATCH): Likewise.
774 (CPU_FLAGS_32BIT_MATCH): Likewise.
775 (CPU_FLAGS_PERFECT_MATCH): Likewise.
777 (vex_imm4): Likewise.
778 (fits_in_imm4): Likewise.
779 (build_vex_prefix): Likewise.
780 (VEX_check_operands): Likewise.
781 (bad_implicit_operand): Likewise.
782 (OPTION_MSSE2AVX): Likewise.
783 (T_YMMWORD): Likewise.
784 (_i386_insn): Add vex.
785 (cpu_arch): Add .avx, .aes, .clmul and .fma.
786 (cpu_flags_match): Changed to take a pointer to const template.
787 Enable encoding SSE instructions with VEX prefix for -msse2avx.
788 (match_mem_size): Also check ymmword.
789 (operand_type_match): Clear ymmword.
790 (md_begin): Allow '_' in mnemonic.
791 (type_names): Add OPERAND_TYPE_VEX_IMM4.
792 (process_immext): Update assert.
793 (md_assemble): Don't call process_immext if sse2avx and immext
794 are true. Call build_vex_prefix if vex is true.
795 (parse_insn): Updated for cpu_flags_match.
796 (swap_operands): Handle 5 operands.
797 (match_template): Handle 5 operands. Updated for cpu_flags_match.
798 Check regymm. Call VEX_check_operands. Handle YMMWORD_MNEM_SUFFIX.
799 (process_suffix): Handle YMMWORD_MNEM_SUFFIX.
800 (check_byte_reg): Check regymm.
801 (process_operands): Duplicate the destination register for
803 (build_modrm_byte): Updated for instructions with VEX encoding.
804 (output_insn): Output VEX prefix if needed.
805 (md_longopts): Add msse2avx.
806 (md_parse_option): Handle OPTION_MSSE2AVX.
807 (md_show_usage): Add avx, aes, clmul, fma and -msse2avx.
808 (intel_e09): Support YMMWORD.
809 (intel_e11): Likewise.
810 (intel_get_token): Likewise.
812 2008-03-28 Eric B. Weddington <eric.weddington@atmel.com>
814 * config/tc-avr.c (mcu_types): Add attiny167.
815 * doc/c-avr.texi: Likewise.
817 2008-03-28 Eric B. Weddington <eric.weddington@atmel.com>
819 * config/tc-avr.c (mcu_types): Add atmega32u4.
820 * doc/c-avr.texi: Likewise.
822 2008-03-28 Eric B. Weddington <eric.weddington@atmel.com>
824 * config/tc-avr.c (mcu_types): Add atmega32c1.
825 * doc/c-avr.texi: Likewise.
827 2008-03-28 Paul Brook <paul@codesourcery.com>
829 * config/tc-arm.c (parse_neon_mov): Parse register before immediate
830 to avoid spurious symbols.
832 2008-03-28 Nathan Sidwell <nathan@codesourcery.com>
834 * config/tc-m68k.c (md_convert_frag_1): Replace as_fatal with
837 2008-03-27 Eric B. Weddington <eric.weddington@atmel.com>
839 * config/tc-avr.c (mcu_types): Add atmega32m1.
840 * doc/c-avr.texi: Likewise.
842 2008-03-27 Ineiev <ineiev@yahoo.co.uk>
844 * config/tc-arm.c (do_neon_cvt): Move variable declarations to
846 (do_neon_ext): Fix sign of comparison.
848 2008-03-26 Bernd Schmidt <bernd.schmidt@analog.com>
850 From Jie Zhang <jie.zhang@analog.com>
851 * config/bfin-parse.y (asm_1): Check AREGS in comparison
852 instructions. And call yyerror when comparing PREG with
854 (check_macfunc_option): New.
855 (check_macfuncs): Check option by calling check_macfunc_option.
856 Fix comparison always true warnings. Both scalar instructions
857 of vector instruction must share the same mode option. Only allow
858 option mode at the end of the second instruction of the vector.
859 (asm_1): Check option by calling check_macfunc_option.
861 * config/bfin-parse.y (check_macfunc_option): Allow (IU)
862 option for multiply and multiply-accumulate to data register
864 (check_macfuncs): Don't check if accumulator matches the data register
866 (assign_macfunc): Check if accumulator matches the
867 data register in each rule that moves to the data
870 * config/tc-bfin.c (bfin_start_line_hook): Localize the labels
871 generated for LOOP_BEGIN and LOOP_END instructions.
872 (bfin_gen_loop): Likewise.
874 2008-03-19 Andreas Krebbel <krebbel1@de.ibm.com>
876 * config/tc-s390.c (md_parse_option): z10 option added.
878 2008-03-17 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
880 * aclocal.m4: Regenerate.
881 * configure: Likewise.
882 * Makefile.in: Likewise.
883 * doc/Makefile.in: Likewise.
885 2008-03-17 Adrian Bunk <bunk@stusta.de>
888 * config/tc-hppa.c (is_same_frag): Delete.
890 2008-03-14 Sterling Augustine <sterling@tensilica.com>
892 * config/tc-xtensa.h (xtensa_relax_statesE): Update comment for
893 RELAX_LOOP_END_ADD_NOP.
895 2008-03-13 Evandro Menezes <evandro@yahoo.com>
898 * read.c (s_mexit): Warn if attempting to exit a macro when not
899 inside a macro definition.
901 2008-03-13 Alan Modra <amodra@bigpond.net.au>
903 * Makefile.am: Run "make dep-am".
904 * Makefile.in: Regenerate.
905 * configure: Regenerate.
907 2008-03-09 Paul Brook <paul@codesourcery.com>
909 * config/tc-arm.c (arm_cpu_option_table): Add cortex-a9.
910 * doc/c-arm.texi: Add cortex-a9.
912 2008-03-09 Paul Brook <paul@codesourcery.com>
914 * config/tc-arm.c (fpu_vfp_ext_d32): New vairable.
915 (parse_vfp_reg_list, encode_arm_vfp_reg): Use it.
916 (arm_option_cpu_value): Add vfpv3-d16, vfpv2 and vfpv3.
917 (aeabi_set_public_attributes): Handle Tag_VFP_arch=VFPV3-D16.
918 * doc/c-arm.texi: Document new ARM FPU variants.
920 2008-03-07 Paul Brook <paul@codesourcery.com>
922 * config/tc-arm.c (md_apply_fix): Use correct offset range.
924 2008-03-07 Alan Modra <amodra@bigpond.net.au>
926 * config/tc-ppc.c (ppc_setup_opcodes): Tidy. Add code to test
927 for strict ordering of powerpc_opcodes, but disable for now.
929 2008-03-04 Paul Brook <paul@codesourcery.com>
931 * config/tc-arm.c (arm_ext_barrier, arm_ext_msr): New.
932 (arm_ext_v7m): Rename...
933 (arm_ext_m): ... to this. Include v6-M.
934 (do_t_add_sub): Allow narrow low-reg non flag setting adds.
935 (do_t_mrs, do_t_msr, aeabi_set_public_attributes): Use arm_ext_m.
936 (md_assemble): Allow wide msr instructions.
937 (insns): Add classifications for v6-m instructions.
938 (arm_cpu_option_table): Add cortex-m1.
939 (arm_arch_option_table): Add armv6-m.
940 (cpu_arch): Add ARM_ARCH_V6M. Fix numbering of other v6 variants.
942 2008-03-03 Sterling Augustine <sterling@tensilica.com>
943 Bob Wilson <bob.wilson@acm.org>
945 * config/tc-xtensa.c (xtensa_num_pipe_stages): New.
946 (md_begin): Initialize it.
947 (resources_conflict): Use it.
949 2008-03-03 Sterling Augustine <sterling@tensilica.com>
951 * config/tc-xtensa.h (RELAX_XTENSA_NONE): New.
953 2008-03-03 Denys Vlasenko <vda.linux@googlemail.com>
954 H.J. Lu <hongjiu.lu@intel.com>
957 * read.c (pseudo_set): Don't allow global register symbol.
959 * symbols.c (S_SET_EXTERNAL): Don't allow register symbol
962 2008-03-03 H.J. Lu <hongjiu.lu@intel.com>
965 * write.c (write_object_file): Don't allow symbols which were
966 equated to register. Stop if there is an error.
968 2008-03-01 Alan Modra <amodra@bigpond.net.au>
970 * config/tc-ppc.h (struct _ppc_fix_extra): New.
972 (TC_FIX_TYPE, TC_INIT_FIX_DATA): Define.
973 * config/tc-ppc.c (ppu_cpu): Make global.
974 (ppc_insert_operand): Add ppu_cpu parameter.
975 (md_assemble): Adjust for above change.
976 (md_apply_fix): Pass tc_fix_data.ppc_cpu to ppc_insert_operand.
978 2008-02-22 Nick Clifton <nickc@redhat.com>
980 * config/tc-arm.c (do_bx): Only test EF_ARM_EABI_VERSION on ELF
981 targeted ARM ports, otherwise just skip generating the reloc.
983 2008-02-18 H.J. Lu <hongjiu.lu@intel.com>
985 * doc/c-i386.texi: Update -march= and .arch.
987 2008-02-18 Nick Clifton <nickc@redhat.com>
989 * config/tc-mn10300.c (has_known_symbol_location): New function.
990 Do not regard weak symbols as having a known location.
991 (md_estimate_size_before_relax): Use new function.
992 (md_pcrel_from): Do not compute a pcrel against a weak symbol.
994 2008-02-18 Jan Beulich <jbeulich@novell.com>
996 * config/tc-i386.c (match_template): Disallow 'l' suffix when
997 currently selected CPU has no 32-bit support.
998 (parse_real_register): Do not return registers not available on
999 currently selected CPU.
1001 2008-02-16 H.J. Lu <hongjiu.lu@intel.com>
1003 * config/tc-i386.c (process_immext): Fix format.
1005 2008-02-16 H.J. Lu <hongjiu.lu@intel.com>
1007 * config/tc-i386.c (inoutportreg): New.
1008 (process_immext): New.
1009 (md_assemble): Use it.
1010 (update_imm): Use imm16 and imm32s.
1011 (i386_att_operand): Use inoutportreg.
1013 2008-02-14 H.J. Lu <hongjiu.lu@intel.com>
1015 * config/tc-i386.c (operand_type_all_zero): New.
1016 (operand_type_set): Likewise.
1017 (operand_type_equal): Likewise.
1018 (cpu_flags_all_zero): Likewise.
1019 (cpu_flags_set): Likewise.
1020 (cpu_flags_equal): Likewise.
1021 (UINTS_ALL_ZERO): Removed.
1022 (UINTS_SET): Likewise.
1023 (UINTS_CLEAR): Likewise.
1024 (UINTS_EQUAL): Likewise.
1025 (cpu_flags_match): Updated.
1026 (smallest_imm_type): Likewise.
1027 (set_cpu_arch): Likewise.
1028 (md_assemble): Likewise.
1029 (optimize_imm): Likewise.
1030 (match_template): Likewise.
1031 (process_suffix): Likewise.
1032 (update_imm): Likewise.
1033 (process_drex): Likewise.
1034 (process_operands): Likewise.
1035 (build_modrm_byte): Likewise.
1036 (i386_immediate): Likewise.
1037 (i386_displacement): Likewise.
1038 (i386_att_operand): Likewise.
1039 (parse_real_register): Likewise.
1040 (md_parse_option): Likewise.
1041 (i386_target_format): Likewise.
1043 2008-02-14 Dimitry Andric <dimitry@andric.com>
1046 * config/tc-arm.c (s_arm_unwind_save): Advance the input line
1047 pointer past the comma after parsing a floating point register
1050 2008-02-14 Hakan Ardo <hakan@debian.org>
1053 * config/tc-avr.c (mcu_types): Change the ISA tyoe of the attiny26
1055 (avr_operand): Disallow post-increment addressing in the lpm
1056 instruction for the attiny26.
1058 2008-02-13 Jan Beulich <jbeulich@novell.com>
1060 * config/tc-i386.c (parse_real_register): Don't return 'FLAT'
1061 if not in Intel mode.
1062 (i386_intel_operand): Ignore segment overrides in immediate and
1064 (intel_e11): Range-check i.mem_operands before use as array
1065 index. Filter out FLAT for uses other than as segment override.
1066 (intel_get_token): Remove broken promotion of "FLAT:" to mean
1069 2008-02-13 Jan Beulich <jbeulich@novell.com>
1071 * config/tc-i386.c (intel_e09): Also special-case 'bound'.
1073 2008-02-13 Jan Beulich <jbeulich@novell.com>
1075 * config/tc-i386.c (allow_pseudo_reg): New.
1076 (parse_real_register): Check for NULL just once. Allow all
1077 register table entries when allow_pseudo_reg is non-zero.
1078 Don't allow any registers without type when allow_pseudo_reg
1080 (tc_x86_regname_to_dw2regnum): Replace with ...
1081 (tc_x86_parse_to_dw2regnum): ... this.
1082 (tc_x86_frame_initial_instructions): Adjust for above change.
1083 * config/tc-i386.h (tc_regname_to_dw2regnum): Remove.
1084 (tc_parse_to_dw2regnum): New.
1085 (tc_x86_regname_to_dw2regnum): Replace with ...
1086 (tc_x86_parse_to_dw2regnum): ... this.
1087 * dw2gencfi.c (tc_parse_to_dw2regnum): New, broken out of ...
1088 (cfi_parse_reg): ... this. Use tc_parse_to_dw2regnum. Adjust
1091 2008-02-12 Nick Clifton <nickc@redhat.com>
1093 * config/tc-tic4x.c (tic4x_insn_insert): Add const qualifier to
1095 (tic4x_insn_add): Likewise.
1096 (md_begin): Drop cast that was discarding a const qualifier.
1097 * config/tc-d30v.c (get_reloc): Add const qualifier to op
1099 (build_insn): Drop cast that was discarding a const qualifier.
1101 2008-02-11 H.J. Lu <hongjiu.lu@intel.com>
1103 * config/tc-i386.c (cpu_arch): Add .xsave.
1104 (md_show_usage): Add .xsave.
1106 * doc/c-i386.texi: Add xsave to -march=.
1108 2008-02-07 Alan Modra <amodra@bigpond.net.au>
1110 * read.c (s_weakref): Don't pass unadorned NULL to concat.
1111 * config/tc-i386.c (set_cpu_arch, md_parse_option): Likewise.
1113 2008-02-05 Sterling Augustine <sterling@tensilica.com>
1115 * config/tc-xtensa.c (relax_frag_immed): Change internal consistency
1116 checks into assertions. When relaxation produces an operation that
1117 does not fit in the current FLIX instruction, make sure that the
1118 operation is relaxed as needed to account for being placed following
1119 the current instruction.
1121 2008-02-04 H.J. Lu <hongjiu.lu@intel.com>
1124 * configure: Regenerated.
1126 2008-02-04 Adam Nemet <anemet@caviumnetworks.com>
1128 * config/tc-mips.c (mips_cpu_info_table): Add Octeon.
1130 2008-01-31 Marc Gauthier <marc@tensilica.com>
1132 * configure.tgt (xtensa*-*-*): Recognize processor variants.
1134 2008-01-25 Kai Tietz <kai.tietz@onevision.com>
1136 * read.c: (emit_expr): Correct for mingw use of printf size
1139 2008-01-24 Bob Wilson <bob.wilson@acm.org>
1141 * doc/c-xtensa.texi (Xtensa Syntax): Clarify handling of opcodes that
1142 can only be encoded in FLIX instructions but are not specified as such.
1143 (Xtensa Automatic Alignment): Remove obsolete comment about debugging
1146 2008-01-24 H.J. Lu <hongjiu.lu@intel.com>
1148 * NEWS: Mention new command line options for x86 targets.
1150 2008-01-23 H.J. Lu <hongjiu.lu@intel.com>
1152 * config/tc-i386.c (md_show_usage): Replace tabs with spaces.
1154 2008-01-23 Eric B. Weddington <eric.weddington@atmel.com>
1156 * config/tc-avr.c (mcu_types): Change opcode set for at86rf401.
1158 2008-01-23 H.J. Lu <hongjiu.lu@intel.com>
1160 * config/tc-i386.c (md_show_usage): Show more processors for
1163 2008-01-22 H.J. Lu <hongjiu.lu@intel.com>
1165 * config/tc-i386.c (i386_target_format): Remove cpummx2.
1167 2008-01-22 H.J. Lu <hongjiu.lu@intel.com>
1169 * config/tc-i386.c (XXX_PREFIX): Moved from tc-i386.h.
1170 (XXX_MNEM_SUFFIX): Likewise.
1171 (END_OF_INSN): Likewise.
1172 (templates): Likewise.
1173 (modrm_byte): Likewise.
1174 (rex_byte): Likewise.
1175 (DREX_XXX): Likewise.
1176 (drex_byte): Likewise.
1177 (sib_byte): Likewise.
1178 (processor_type): Likewise.
1179 (arch_entry): Likewise.
1180 (cpu_sub_arch_name): Remove const.
1181 (cpu_arch): Add .vmx and .smx.
1182 (set_cpu_arch): Append cpu_sub_arch_name.
1183 (md_parse_option): Support -march=CPU[,+EXTENSION...].
1184 (md_show_usage): Updated.
1186 * config/tc-i386.h (XXX_PREFIX): Moved to tc-i386.c.
1187 (XXX_MNEM_SUFFIX): Likewise.
1188 (END_OF_INSN): Likewise.
1189 (templates): Likewise.
1190 (modrm_byte): Likewise.
1191 (rex_byte): Likewise.
1192 (DREX_XXX): Likewise.
1193 (drex_byte): Likewise.
1194 (sib_byte): Likewise.
1195 (processor_type): Likewise.
1196 (arch_entry): Likewise.
1198 * doc/as.texinfo: Update i386 -march option.
1200 * doc/c-i386.texi: Update -march= for ISA.
1202 2008-01-18 Bob Wilson <bob.wilson@acm.org>
1204 * config/tc-xtensa.c (xtensa_leb128): New function.
1205 (md_pseudo_table): Use it for sleb128 and uleb128.
1206 (is_leb128_expr): New internal flag.
1207 (xtensa_symbol_new_hook): Check new flag.
1209 2008-01-16 Eric B. Weddington <eric.weddington@atmel.com>
1211 * config/tc-avr.c (mcu_types): Change opcode set for avr3,
1212 at90usb82, at90usb162.
1213 * doc/c-avr.texi: Change architecture grouping for at90usb82,
1215 These changes support the new avr35 architecture group in gcc.
1217 2008-01-15 H.J. Lu <hongjiu.lu@intel.com>
1219 * config/tc-i386.c (md_assemble): Also zap movzx and movsx
1220 suffix for AT&T syntax.
1222 2008-01-14 H.J. Lu <hongjiu.lu@intel.com>
1224 * config/tc-i386.c (match_reg_size): New.
1225 (match_mem_size): Likewise.
1226 (operand_size_match): Likewise.
1227 (operand_type_match): Also clear all size fields.
1228 (match_template): Skip Intel syntax when in AT&T syntax.
1229 Call operand_size_match to check operand size.
1230 (i386_att_operand): Set the mem field to 1 for memory
1232 (i386_intel_operand): Likewise.
1234 2008-01-12 H.J. Lu <hongjiu.lu@intel.com>
1237 * config/tc-i386.c (_i386_insn): Update comment.
1238 (operand_type_match): Also clear unspecified.
1239 (operand_type_register_match): Likewise.
1240 (parse_operands): Initialize unspecified.
1241 (i386_intel_operand): Likewise.
1242 (match_template): Check memory and accumulator operand size.
1243 (i386_att_operand): Clear unspecified on register operand.
1244 (intel_e11): Likewise.
1245 (intel_e09): Set operand size and clean unspecified for
1248 2008-01-11 Andreas Schwab <schwab@suse.de>
1250 * read.c (s_space): Declare `repeat' as offsetT.
1252 2008-01-10 H.J. Lu <hongjiu.lu@intel.com>
1254 * config/tc-i386.c (match_template): Check processor support
1257 2008-01-10 H.J. Lu <hongjiu.lu@intel.com>
1259 * config/tc-i386.c (match_template): Continue if processor
1262 2008-01-09 Alexandre Oliva <aoliva@redhat.com>
1264 * config/tc-ia64.c (ia64_convert_frag): Zero-initialize room for
1265 unwind personality function address.
1267 2008-01-09 Bob Wilson <bob.wilson@acm.org>
1269 * dwarf2dbg.c (out_sleb128): Delete.
1270 (size_fixed_inc_line_addr, emit_fixed_inc_line_addr): New.
1271 (out_fixed_inc_line_addr): Delete.
1272 (relax_inc_line_addr, dwarf2dbg_estimate_size_before_relax): Call new
1273 size_fixed_inc_line_addr if DWARF2_USE_FIXED_ADVANCE_PC is set.
1274 (dwarf2dbg_convert_frag): Likewise for emit_fixed_inc_line_addr.
1275 (process_entries): Remove calls to out_fixed_inc_line_addr. When
1276 DWARF2_USE_FIXED_ADVANCE_PC is set, call relax_inc_line_addr.
1277 * read.h (emit_expr_fix): New prototype.
1278 * read.c (emit_expr): Move code to emit_expr_fix and use it here.
1279 (emit_expr_fix): New.
1281 2008-01-09 H.J. Lu <hongjiu.lu@intel.com>
1283 * config/tc-i386.c (match_template): Check register size
1284 only when size of operands can be encoded the canonical way.
1286 2008-01-08 H.J. Lu <hongjiu.lu@intel.com>
1288 * config/tc-i386.c (i386_operand): Renamed to ...
1289 (i386_att_operand): This.
1290 (parse_operands): Updated.
1292 2008-01-05 H.J. Lu <hongjiu.lu@intel.com>
1294 * doc/c-i386.texi: Update .att_mnemonic and .intel_mnemonic.
1296 * config/tc-i386.c (set_intel_mnemonic): Set intel_mnemonic
1298 (md_assemble): Remove Intel mode workaround.
1299 (match_template): Check support for old gcc, AT&T mnemonic
1301 (md_parse_option): Don't set intel_mnemonic to 0 for
1304 2008-01-04 H.J. Lu <hongjiu.lu@intel.com>
1306 * config/tc-i386.h: Update copyright to 2008.
1308 2008-01-04 Nick Clifton <nickc@redhat.com>
1310 * config/tc-ppc.c (parse_cpu): Preserve the settings of the
1311 PPC_OPCODE_ALTIVEC and PPC_OPCODE_SPE flags.
1313 2008-01-03 H.J. Lu <hongjiu.lu@intel.com>
1315 * config/tc-i386.c (md_assemble): Use !intel_mnemonic instead
1318 2008-01-03 H.J. Lu <hongjiu.lu@intel.com>
1320 * gas/config/tc-i386.c (cpu_arch_flags_not): Removed.
1321 (cpu_flags_not): Likewise.
1322 (cpu_flags_match): Updated to check 64bit and arch.
1323 (set_code_flag): Remove cpu_arch_flags_not.
1324 (set_16bit_gcc_code_flag): Likewise.
1325 (set_cpu_arch): Likewise.
1326 (md_begin): Likewise.
1327 (parse_insn): Call cpu_flags_match to check 64bit and arch.
1328 (match_template): Likewise.
1330 2008-01-03 Jakub Jelinek <jakub@redhat.com>
1332 * config/tc-i386.c (process_drex): Initialize modrm_reg and
1333 modrm_regmem to 0 instead of None.
1335 2008-01-03 H.J. Lu <hongjiu.lu@intel.com>
1337 * config/tc-i386.c (match_template): Use the xmmword field
1340 2008-01-02 H.J. Lu <hongjiu.lu@intel.com>
1342 * config/tc-i386.c (process_suffix): Fix a typo.
1344 2008-01-02 H.J. Lu <hongjiu.lu@intel.com>
1347 * config/tc-i386.c (match_template): Handle XMMWORD_MNEM_SUFFIX.
1348 Check memory size in Intel mode.
1349 (process_suffix): Handle XMMWORD_MNEM_SUFFIX.
1350 (intel_e09): Likewise.
1352 * config/tc-i386.h (XMMWORD_MNEM_SUFFIX): New.
1354 2008-01-02 Catherine Moore <clm@codesourcery.com>
1356 * config/tc-mips.c (mips_ip): Check operands on jalr instruction.
1358 For older changes see ChangeLog-2007
1364 version-control: never