1 Thu Mar 25 08:59:14 1993 Ian Lance Taylor (ian@cygnus.com)
3 * app.c (do_scrub_next_char): Added new state, 10, modifying state
4 9 to only keep a space in between identifier characters.
6 Wed Mar 24 02:16:22 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
8 * Makefile.in: add dvi target; as-$(config).texinfo might live in
9 srcdir, might be in objdir.
11 * doc/Makefile.in: dvi depends on as.dvi
13 Mon Mar 22 23:59:13 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
15 * Makefile.in: add installcheck target
17 Mon Mar 22 10:19:00 1993 Ian Lance Taylor (ian@cygnus.com)
19 * config/tc-mips.c (macro): Use $AT for any floating point load.
21 Sat Mar 20 12:50:51 1993 Ken Raeburn (raeburn@urth.cygnus.com)
23 * config/tc-m68k.c (m68k_ip): For operand type 'M', reject
24 bignums, but don't emit error message.
26 Fri Mar 19 21:02:19 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
28 * Makefile.in (targ-cpu.o): Depend on config.h.
30 Wed Mar 17 16:44:06 1993 Ian Lance Taylor (ian@cygnus.com)
32 * app.c (do_scrub_next_char): Added new state, 9, to avoid
33 dropping a space immediately following an identifier.
34 * expr.c, write.c: Rewrote assert expressions to not use multiple
35 lines; I don't think that can be done portably.
36 * config/tc-mips.c (macro): Use $AT if target register is zero in
37 load instruction, which it can be for a floating point load.
39 Mon Mar 15 12:17:28 1993 Ian Lance Taylor (ian@cygnus.com)
41 * write.c (write_contents): Compute the relocs before writing out
43 * config/obj-ecoff.h, config/obj-ecoff.c: Numerous changes to get
44 symbol table and values right.
45 * config/tc-mips.h (LOCAL_LABEL): If OBJ_ECOFF, any label starting
47 * config/tc-mips.c (tc_gen_reloc): If OBJ_ECOFF, adjust the addend
50 * config/z8k.mt (TARG_CPU_DEPENDENTS): The relevant file is
53 * config/obj-coffbfd.c (obj_coff_endef): Correct test for .bf
56 Fri Mar 12 18:33:36 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
58 * configure.in: recognize sparc-sun-solaris2* instead of -solaris2
60 Fri Mar 12 12:00:07 1993 Ian Lance Taylor (ian@cygnus.com)
62 * expr.c, write.c: Ultrix native 4.2 cc requires assert condition
63 to be on a single line.
65 Thu Mar 11 17:56:22 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
67 * Makefile.in (config.h): Create file, writing out definitions of
68 target cpu, alias, and canonical name.
69 (ALL_CFLAGS): No longer define TARGET_CPU.
71 * Makefile.in (check): Print a message, instead of quitting
74 * as.c (main): Don't catch any signals, for now.
77 * Makefile.in: Generate it, putting in only the version number
79 (VERSION): New variable.
80 * as.c: Include config.h.
81 (main): Reformatted version string. Include target alias. Don't
82 print if not requested (i.e., unknown -v argument).
84 * as.c (stralloc): Deleted.
85 (main): Call strdup instead.
87 * configure.in: Handle all 68300 series chips.
88 * config/tc-m68k.c: Include config.h.
89 (md_assemble): Assume TARGET_CPU is defined. Accept some 68300
90 series cpus as defaults.
91 (md_parse_option): Accept some m68300 series CPUs as defaults.
93 Wed Mar 10 17:41:16 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
95 * as.c (EXIT_SUCCESS, EXIT_FAILURE): Define to normal values if
97 (main, got_sig): Use them.
98 * config/ho-vms.h (EXIT_SUCCESS, EXIT_FAILURE): Reverse default
101 Tue Mar 9 07:40:06 1993 Ian Lance Taylor (ian@cygnus.com)
103 * config/obj-ecoff.c, config/obj-ecoff.h: Preliminary ECOFF
106 * config/tc-mips.h (TARGET_FORMAT): Define based on OBJ_AOUT vs.
107 OBJ_ECOFF as well as TARGET_BYTES_*_ENDIAN.
108 (struct loc, struct proc, struct file): Moved to tc-mips.c within
109 #ifndef OBJ_ECOFF block, since ECOFF uses different versions.
110 * config/tc-mips.c: Rearranged for ECOFF support. Added
111 prototypes for all static functions. Moved existing minimal
112 debugging format support info #ifndef OBJ_ECOFF blocks.
113 (macro_build_lui): Eliminated sign_extend argument, because ECOFF
114 does not support a non sign extended high 16 bits reloc. Adjusted
115 all callers accordingly.
116 (tc_get_register): Renamed from get_register, and made non-static.
118 * config/mips-big.mt, config/mips-lit.mt: New files. Define
119 TARGET_BYTES_BIG_ENDIAN and TARGET_BYTES_LITTLE_ENDIAN,
121 * configure.in (mips-*-bsd*): Use gas_target mips-lit.
122 (mips-*-ultrix*, mips-*-irix*, mips-*-ecoff): New targets, using
123 obj_format ecoff and gas_target mips-lit or mips-big.
125 Tue Mar 9 07:43:01 1993 Ken Raeburn (raeburn@cygnus.com)
127 * version.c: Bump to version 2.0.1.
129 Tue Mar 9 07:40:06 1993 Ian Lance Taylor (ian@cygnus.com)
131 * write.c (chain_frchains_together): Check that seg_info (section)
133 (write_object_file): Call obj_frob_file after setting the symbols,
136 Mon Mar 8 14:57:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
138 * config/tc-i386.h (TC_COUNT_RELOC): Look for fx_addsy only.
140 Fri Mar 5 09:05:55 1993 Ian Lance Taylor (ian@cygnus.com)
142 * read.h: Define stringer here.
143 read.c, config/obj-ieee.c, config/obj-tcm88k.c: Not any of these
146 Thu Mar 4 11:52:23 1993 Steve Chamberlain (sac@thepub.cygnus.com)
148 * read.c (s_space): Multiply repeat count by mult, not fill.
150 Thu Mar 4 05:20:42 1993 Ken Raeburn (raeburn@cygnus.com)
152 * read.c: Include ctype.h.
154 Wed Mar 3 10:41:46 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
156 Patches from Eric Youngdale:
157 * make-gas.com: Find obstack.obj if it's not in the current
159 * read.c (s_ignore): Don't declare is_end_of_line. It's
160 redundant, and triggers a VMS gcc compiler bug.
162 * write.c (write_object_file): Macro SUB_SEGMENT_ALIGN now takes
163 current segment as an argument. (Ignored in all cases but VMS.)
164 All callers and definitions changed.
166 Tue Mar 2 11:56:19 1993 Ian Lance Taylor (ian@cygnus.com)
168 * listing.c: Cleaned up a bit, added prototypes, made NO_LISTING
171 Tue Mar 2 08:53:34 1993 Ken Raeburn (raeburn@cygnus.com)
173 * config/tc-m68k.c (isbyte): Accept all values from -255 to +255,
174 so "~0x80" won't be rejected.
176 * config/obj-elf.c: No longer include elf/reloc.h.
177 (obj_elf_section): Set SEC_READONLY and SEC_CODE for text section.
178 (obj_elf_stab, obj_elf_desc): Deleted do-nothing and commented-out
180 (obj_elf_xstab): New routine.
181 (obj_elf_set_size): Call as_warn, not fprintf. Pass desired
182 argument to s_ignore. Put "#if 0" around unused code.
183 (obj_pseudo_table): Use s_ignore instead of do-nothing routines.
184 Call elf_xstabs for .stabs and .xstabs operators.
186 * config/tc-sparc.h (TARGET_FORMAT) [OBJ_ELF]: Now "elf32-sparc".
188 * write.c (relax_and_size_seg): Set SEC_RELOC only if fixups are
191 * configure.in: mips-bsd configuration was missing format spec.
194 * Makefile.in (Makefile): Depends on configure.in.
196 * config/tc-mips.c (append_insn): Don't check for alignment of
197 frag in memory; alignment of instructions in section is a separate
200 * config/tc-mips.c (macro_build_lui): Fix some assumptions of ANSI
203 * listing.h: Always provide function declarations, not macros, so
206 Tue Mar 2 00:50:43 1993 John Gilmore (gnu@cygnus.com)
208 * CONTRIBUTORS: Update Gilmore entry.
210 Wed Feb 24 14:58:19 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
212 * frags.c (frag_init): New function.
213 (zero_address_frag, bss_address_frag): Now initialized at run
215 * as.c (main): Call frag_init.
217 Wed Feb 24 10:32:42 1993 Ian Lance Taylor (ian@cygnus.com)
219 * app.c (do_scrub_next_char): In LEX_IS_LINE_COMMENT_START case:
220 Don't unget ch2 if we didn't get it.
222 Wed Feb 24 04:14:07 1993 Ken Raeburn (raeburn@kr-pc.cygnus.com)
224 * doc/Makefile.in (TEXIDIR): Updated for new layout.
226 * config/tc-sparc.c (s_common): Add support for ELF version.
227 (tc_gen_reloc) [BFD_ASSEMBLER]: New function.
228 * config/tc-sparc.h (TARGET_ARCH, TARGET_FORMAT) [BFD_ASSEMBLER]:
230 (md_convert_frag): New macro.
232 * config/tc-m68k.c (m68k_ip): For PC-relative addressing of a
233 symbol, fix the offset so "+2" isn't required.
235 * config/tc-i960.c (line_comment_chars, line_separator_chars):
236 Define as common/bss.
237 (op_hash, reg_hash, areg_hash, iclasses_seen, br_cnt): Default C
238 initializers are sufficient.
240 * config/obj-aout.h [BFD_ASSEMBLER]: Include libaout.h from bfd.
241 (TARGET_FORMAT) [BFD_ASSEMBLER]: Default to "a.out".
242 (S_SET_*, S_GET_*, obj_frob_symbol) [BFD_ASSEMBLER]: New macros.
243 (S_SET_TYPE) [!BFD_ASSEMBLER]: New macro.
244 * config/obj-aout.c: Use PARAMS macro for declarations. Remove
245 "IGNORE_DEBUG" conditional, since both branches are identical.
246 Use S_SET_TYPE, S_GET_TYPE, and S_GET_DESC instead of directly
247 referencing symbol structure members.
248 (obj_aout_frob_symbol) [BFD_ASSEMBLER]: New function.
250 * as.h (struct frag): Reordered a couple of fields for better
253 * write.c (record_alignment) [BFD_ASSEMBLER]: Record it in the
255 (write_contents) [BFD_ASSEMBLER]: New function.
256 (write_object_file) [BFD_ASSEMBLER]: Always handle -R here. Call
257 fix_new with BFD_RELOC_NONE instead of 0 or NO_RELOC. Call
258 obj_frob_file, obj_frob_symbol, tc_frob_symbol if defined.
259 (fixup_segment): Make sure common-section symbols get treated the
260 same as undefined symbols.
261 (fix_new) [BFD_ASSEMBLER]: Argument r_type is of type
262 bfd_reloc_code_real_type. Use seg_fix_{root,tail}P derived from
264 * write.h (fix_new): Update prototype.
266 * tc.h (md_operand, md_convert_frag, tc_headers_hook,
267 md_section_align, md_undefined_symbol): Don't provide prototypes
268 if these are defined as macros.
269 (md_convert_frag) [BFD_ASSEMBLER]: BFD version needs bfd and
272 * symbols.c (symbol_new): Argument NAME is now pointer to const.
273 Simplified STRIP_UNDERSCORE code. Remove assumptions about null
274 pointers in freshly allocated storage. [BFD_ASSEMBLER]: Get new
276 (colon): Display other/desc fields of redefined symbol only if
277 S_GET_OTHER and S_GET_DESC are defined.
278 (symbol_make): Argument NAME is now pointer to const.
279 (symbol_find, symbol_find_base): Likewise.
280 (S_IS_*, S_GET_*, S_SET_*) [BFD_ASSEMBLER]: New functions.
281 * symbols.h: Fix prototypes for new const arguments. Add
282 prototypes for BFD_ASSEMBLER S_* functions.
284 * subsegs.c (subseg_change) [BFD_ASSEMBLER]: BFD version of code
285 for changing to an existing section.
286 (subseg_new_rest) [BFD_ASSEMBLER]: Split off from subseg_new,
287 called by subseg_new and subseg_set.
288 (subseg_new) [BFD_ASSEMBLER]: Rewritten to change to new section,
289 given section name and subseg number.
290 (subseg_set) [BFD_ASSEMBLER]: New function; change to a possibly
291 new section/subsection.
293 * read.c: Don't include ctype.h.
294 (cons) [BFD_ASSEMBLER]: For undefined symbols, use BFD_RELOC_32
295 for now; should be machine-dependent.
297 * configure.in: Accept *-*-elf and *-*-solaris* as ELF format
298 targets, forcing BFD use.
300 Wed Feb 17 18:59:03 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
302 * config/tc-sparc.c: Use PARAMS macro for static function
303 declarations. Use BFD_RELOC_ macros everywhere, with
304 compatibility macros declared for non-BFD mode.
305 (struct sparc_it) [BFD_ASSEMBLER]: Use bfd_reloc_code_real_type
306 instead of enum reloc_type.
307 (emit_sparc_reloc): Commented-out function deleted.
308 (md_convert_frag): Deleted.
309 (tc_aout_pre_write_hook): Don't define for BFD_ASSEMBLER.
310 (md_apply_fix): Changed calling sequence (conditionally) for BFD
312 * config/tc-sparc.h (md_convert_frag): New macro.
314 * config/obj-aout.c (obj_aout_stab): Refer to undefined_section,
315 not SEG_UNKNOWN. Use S_SET_TYPE, S_GET_TYPE, S_GET_DESC instead
316 of referencing fields directly.
318 * write.c (cvt_frag_to_fill): New function; extracted from
320 (write_object_file) [! BFD_ASSEMBLER]: Call it.
321 (relax_and_size_seg) [BFD_ASSEMBLER]: New function; relax section
322 and set its size and flags.
324 * struc-symbol.h (struct symbol) [BFD_ASSEMBLER]: Replace some
325 fields with BFD equivalents. Turn on back-pointers, and add
326 target-specific fields at end.
328 Thu Feb 11 09:20:37 1993 Ian Lance Taylor (ian@cygnus.com)
330 * config/obj-coffbfd.c (fill_section): Don't set vaddr here.
331 (write_object_file): Set it here instead, so that fixup_segment
332 can see the correct value.
334 Mon Feb 8 13:56:17 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
336 * write.c (write_object_file): Check for errors and warnings and
337 bail out before processing contents.
338 (chain_frchains_together_1): New function, does most of the work
340 (chain_frchains_together) [BFD_ASSEMBLER]: New function.
341 (remove_subsegs) [! BFD]: Call it.
342 (write_object_file) [BFD_ASSEMBLER]: Converted to use BFD
343 structures and routines.
345 * config/obj-elf.*: New files.
347 * config/mips.mt, config/rs6000.mt: Deleted.
349 * config/h8300.mt: Don't specify compiler here.
351 * config/z8k.mt: The z8k code depends on the z8k opcode table,
353 * config/tc-z8k.h: Comment fix.
355 * write.c: Reordered some functions for better inlining.
356 (fixup_segment): Linkrelax code is no longer conditional on
359 Thu Feb 4 12:45:16 1993 Steve Chamberlain (sac@thepub.cygnus.com)
361 * config/{h8500.mt, tc-h8500.c, tc-h8500.h, obj-coffbfd.c,
362 obj-coffbfd.h}: support for the H8/500
364 Wed Feb 3 19:28:18 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
366 * config/obj-vms.h (SUB_SEGMENT_ALIGN): Define VMS version here.
367 * write.c (write_object_file): Not here.
368 (fix_new): Initialize fx_addnumber.
370 * listing.c: Don't include target-cpu.h explicitly, since as.h
373 Thu Jan 28 00:35:40 1993 Ken Raeburn (raeburn@kr-pc.cygnus.com)
375 * write.h [BFD_ASSEMBLER]: Don't declare next_object_file_charP,
376 *_fix_root, *_fix_tail, seg_fix_rootP, seg_fix_tailP.
377 (struct fix): Reordered fields for compactness and efficiency.
378 Converted some logical fields to 1-bit fields.
380 * config/obj-aout.h: Use PARAMS.
381 [BFD_ASSEMBLER]: Don't define/declare AOUT_MACHTYPE, seg_N_TYPE,
382 N_TYPE_seg, DEFAULT_MAGIC_NUMBER_FOR_OBJECT_FILE.
384 * read.c: Don't include listing.h; as.h includes it. Removed
386 [BFD_ASSEMBLER]: Include subsegs.h.
387 (old_buffer, new_broken_words): Default initialization is
390 * output-file.c [BFD_ASSEMBLER]: Include bfd.h, default TARGET_MACH
391 to 0, define stdoutput.
392 (output_file_create) [BFD_ASSEMBLER]: Call bfd_perror on failure.
393 Call bfd_set_arch_mach.
394 (output_file_close) [BFD_ASSEMBLER]: Call bfd_close, not
395 bfd_close_all_done. Call bfd_perror on failure.
396 (output_file_append) [BFD_ASSEMBLER]: Don't define.
398 * config/m68kcoff.mt (LOCAL_LOADLIBES): Delete definition.
400 * subsegs.h (segment_info_type): Always define. Omit field scnhdr
401 if not MANY_SEGMENTS. Define new field bfd_section if
403 (seg_info): New macro.
405 * expr.c, input-scrub.c: Use PARAMS macro. Deleted unused
406 variables, and some irrelevant comments.
408 * Makefile.in (ALL_CFLAGS): Include $(BFDDEF).
409 (LIBS): Include $(BFDLIB). Don't bother with $(CLIB).
410 * configure.in: Permit --with-bfd-assembler now, with a warning.
411 Variable need_bfd is now a boolean, as is new variable bfd_gas.
412 Set BFDDEF and BFDLIB in Makefile when appropriate.
414 * as.c: Removed "#ifdef DONTDEF" and "#ifdef comment" code.
415 (main): Refer to flag_always_generate_output instead of
418 * as.c (main) [BFD_ASSEMBLER]: Open output bfd.
419 (*_section) [BFD_ASSEMBLER]: Define them.
420 (perform_an_assembly_pass) [BFD_ASSEMBLER]: Initialize them, and
421 set section flags when appropriate.
422 * as.h (SEG_NORMAL) [BFD_ASSEMBLER]: Require that the specified
423 section is not absolute, undefined, or an assembler internal one.
424 (absolute_section, undefined_section): Always define.
425 * expr.c, read.c, symbols.c: Refer to *_section, not SEG_*; break
426 switch statements into if-else trees.
427 * symbols.c [MANY_SEGMENTS]: Deleted redundant definitions of
428 SEG_BSS and SEG_DATA.
430 * as.h (frag_now_fix): New macro.
431 * symbols.c (colon): Use it.
433 Wed Jan 27 21:43:53 PST 1993 Ralph Campbell (ralphc@pyramid.com)
435 * config/tc-mips.c: Added mips support for mips-dec-bsd.
436 * config/tc-mips.h: Added mips support for mips-dec-bsd.
437 * config/ho-mipsbsd.h: Added mips support for mips-dec-bsd.
438 * config/mips-opcode.h: Added mips support for mips-dec-bsd.
439 * configure.in: Added mips support for mips-dec-bsd.
440 * atof-generic.c: Define TRUE and FALSE if not defined.
442 Thu Jan 21 12:48:19 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
444 * version.c: Bumped version number to 1.93.05.
446 Wed Jan 20 17:11:53 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
448 * config/obj-coff.c (obj_emit_relocations): Don't use #elif.
449 (obj_emit_lineno): Don't need return at end of void function.
450 (obj_symbol_new_hook): Ditto.
452 * config/tc-m68k.c: Removed some unused code.
453 (tc_aout_fix_to_chars): Array nbytes_r_length is now const.
455 * config/tc-m68k.h (TC_COUNT_RELOC): Don't emit reloc if only
458 Fri Jan 8 05:44:49 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
460 * config/tc-sparc.c (architecture_requested, warn_on_bump,
461 md_relax_table): Use default zero initialization.
462 (s_reserve): Since SEG_E2 is equivalent to SEG_BSS, just use the
463 latter, instead of selecting with preprocessor conditionals.
465 Thu Jan 7 08:58:21 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
467 * configure.in: recognise all sparclite variants
469 Thu Jan 7 05:25:25 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
471 * read.c (s_data) [!BFD_ASSEMBLER]: Fix typo in 4 Jan change --
472 accidentally changed to use subseg_change where it should have
475 Tue Jan 5 08:42:16 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
477 * expr.c (operand): If character other than comma or newline is a
478 logical end-of-line character, use the newline case.
480 (operand): Set X_add_number field for floating-point numbers.
481 (operand): Treat zero byte as end-of-operand.
483 * configure.in (per-target): Look for with_bfd_assembler option.
484 For now, only accept "no", until the merge is done.
486 Merged changes from Eric Youngdale (youngdale@v6550c.nrl.navy.mil):
487 * as.c, flonum-konst.c, hex-value.c, input-file.c, version.c,
488 config/obj-aout.h, config/obj-vms.c: VMS -> HO_VMS.
489 * read.c: Finish conversion to S_* macros in the VMS only
490 parts of the program. Add "const" modifier to hex_value.
491 * as.c, read.c, symbols.c, write.c: Change "ifdef VMS" to
493 * expr.c: Add "const" modifier to hex_value.
494 * symbols.c: Finish conversion to S_* macros in the VMS only
495 parts of the program. Add "const" modifier to
496 md_[long,short]_jump_size. Remove declaration of const_flag
497 (which will be declared in obj-vms.h).
498 * write.c: Add "const" modifier to md_[long,short]_jump_size.
499 Fix arguments to VMS_write_object_file.
500 * config-gas.com: New file. Script for VMS systems to set up the
501 configuration to build gas for VMS, and create config.status.
502 * make-gas.com: Redone to work with new scheme.
503 * obj-vms.c: Patch to fix bug where we were not correctly parsing the
505 * obj-vms.c: Define macros COPY_LONG and COPY_SHORT which
506 will swap bytes if needed on a big endian system. Use throughout
508 * obj-vms.c (obj_aout_stab): Add code to generate listing file.
509 * obj-vms.c (VMS_typedef_parse): Add alias to correctly handle certain
510 types of malformed stabs. Change parsing algorithm so that we are
511 more certain of having all of the information that we need on hand.
512 * obj-vms.c (final_forward_reference): New function, used to help
513 resolve the data types of as many struct elements as possible
514 when some part of the struct is not fully defined by the compiler.
515 * obj-vms.c (VMS_LSYM_Parse): Correctly handle case of continuation
517 * obj-vms.c (VMS_write_object_file): Define all vtable psects
518 as symbols as well in the object file. Look for external functions
519 that start with "__vt.", and turn them into variables, since the
520 g++ compiler is incapable of doing this.
521 * tc-vax.c: Add '1' option for backward compatibility with older GCC
523 * bignum-copy.c (bignum_copy): Fix bug where we pad with zeroes.
524 * input-scrub.c (as_where): Fix bug where as would crash if we did not
525 have the name of the source file yet.
526 * config/ho-vms.h: define HO_VMS, not HO_VAX.
528 Mon Jan 4 05:17:26 1993 Ken Raeburn (raeburn@cygnus.com)
530 * read.c (s_data): Always use "data_section", since it'll map to
531 SEG_DATA or SEG_E1 if needed.
532 (s_lcomm): Likewise with bss_section.
533 (s_fill): Use memset, not bzero.
535 Thu Dec 31 04:29:27 1992 Ken Raeburn (raeburn@kr-pc.cygnus.com)
537 * read.c: Deleted some code under "#ifdef DONTDEF" that was for
538 handling GDB symbol table data.
540 * config/obj-aout.h (segment_name): Delete definition.
541 (seg_name): Delete declaration.
542 * config/obj-bout.h (segment_name, seg_name): Ditto.
543 * config/obj-vms.h (segment_name, seg_name): Ditto.
544 * config/obj-coff.h (segment_name): Ditto.
545 * config/obj-coffbfd.h (segment_name): Ditto.
547 * Changes for BFD_ASSEMBLER:
548 * obj.h (obj_crawl_symbol_chain): Declare only if not
550 (obj_header_append, obj_pre_write_hook): Ditto.
551 * as.h (stdoutput): New var, defined only if BFD_ASSEMBLER.
552 (segT) [BFD_ASSEMBLER]: New typedef for "asection *".
553 (segment_name) If BFD_ASSEMBLER, look up BFD section name;
554 otherwise, use seg_name array.
555 (seg_name): Declare only if not BFD_ASSEMBLER.
556 (section_alignment): Declare only if not BFD_ASSEMBLER.
557 (big_section, reg_section, pass1_section, diff_section,
558 absent_section, text_section, data_section, bss_section): If
559 BFD_ASSEMBLER, declare as variables; otherwise, declare as macros,
560 mapping to segT enum values.
561 (tc_aout_fix_to_chars, next_object_file_charP): Force parse errors
562 if these are used or defined, if BFD_ASSEMBLER.
563 (subseg_set, subseg_new) [BFD_ASSEMBLER]: Functionality of old
564 subseg_new split into two functions.
565 (SEG_NORMAL): For BFD_ASSEMBLER, always return true, for now.
567 * as.h (volatile): Don't define if already defined.
568 (had_errors, had_warnings): Provide prototypes for ANSI C even if
570 (as_bad, as_fatal, as_tsktsk, as_warn): For GNU C version 2,
571 declare with format attribute for -Wformat checking.
573 Wed Dec 30 10:18:57 1992 Ian Lance Taylor (ian@cygnus.com)
575 * app.c, config/tc-*.c: Don't include read.h, since it is already
578 * These are based on patches from Minh Tran-le
579 <mtranle@paris.intellicorp.com>.
580 * configure.in (i[34]86-ibm-aix*): Accept i486 for host. Use
581 obj_format coffbfd and gas_target i386coff for target.
582 (i[34]86-*-isc*): New host (uses sysv).
583 * config/i386aix.mt: Removed (no longer used).
584 * config/mh-i386aix (RANLIB): Use true rather than /bin/true.
586 (LDFLAGS): Added, defined as -shlib.
587 * config/te-i386aix.h (REVERSE_SORT_RELOCS): Undefine.
588 * config/te-sco386.h (LOCAL_LABEL): Don't define.
589 (DOT_LABEL_PREFIX): Define.
590 * expr.c (operand): If DOT_LABEL_PREFIX, use .L0\001 as a label
591 name rather than L0\001.
592 * read.c (s_lcomm): Make a frag in SEG_BSS rather than using
594 * symbols.c, symbols.h (local_bss_counter): Removed.
595 * write.c (write_object_file): bss no longer uses
596 local_bss_counter. Pass correct data and bss size to
597 VMS_write_object_file.
598 * config/obj-vms.c (VMS_write_object_file): Accept bss size as
599 argument, rather than using local_bss_counter.
600 * config/tc-m88k.c (s_bss): Don't use local_bss_counter.
601 * config/tc-sparc.c (s_reserve): Don't use local_bss_counter.
602 * config/obj-coffbfd.c (had_lineno, had_reloc): Removed.
603 (size_section): Restored sanity check.
604 (do_relocs_for): Base section address on s_paddr rather than
605 computing it. Adjust a29k R_IHIHALF special case to account for
606 section paddr (used to require paddr to be zero). If there are no
607 reclos, set s_relptr to 0. Set relocation size in object_headers.
608 (fill_section): Always set s_vaddr here, removing
609 ZERO_BASED_SEGMENTS case. Force s_scnptr for bss to 0. Don't set
610 NOLOAD for i386 .bss, because it confuses the SVR3 native linker.
611 Set STYP_INFO for .comment.
612 (coff_header_append): Use object headers and H_{SET,GET}_* macros.
613 Make aouthdr writing depend on OBJ_COFF_OMIT_OPTIONAL_HEADER.
614 (crawl_symbols): Handle 8 character section name correctly. Use
615 H_{SET,GET}_* macros.
616 (do_linenos_for): Set lineno size in object_headers.
617 (write_object_file): Use H_{SET,GET}_* macros. Don't bother to
618 set s_vaddr here. If string_byte_count remains 4, set it back to
619 0, and only write strings out if there are some. Call
620 fill_section before do_relocs_for and do_linenos_for.
621 (obj_coff_section): Handle optional quoted second argument giving
622 section characteristics.
623 (obj_coff_bss): Added to handle .bss.
624 (obj_coff_ident): Added to handle .ident (puts string in .comment
626 (obj_coff_lcomm): Put common symbols in .bss, not .data.
627 (fixup_mdeps): Change to segment. Call frag_wane after
629 (fixup_segment): Explicitly check S_IS_COMMON before making 386
630 adjustment (already happened only for common symbols, but this is
632 * config/obj-coffbfd.h (OBJ_COFF_OMIT_OPTIONAL_HEADER): Define.
633 * config/tc-i386.c (s_bss): Don't use if I386COFF.
634 (md_pseudo_table): Ignore .optim and .noopt.
635 (tc_coff_sizemachdep): New function.
636 * config/tc-i386.h (REVERSE_SORT_RELOCS): Undef, for SVR3
638 (LOCAL_LABEL): Removed definition.
639 (DOT_LABEL_PREFIX): Defined.
641 Mon Dec 28 10:32:05 1992 Ken Raeburn (raeburn@cygnus.com)
643 * app.c (app_push): Use memcpy, not bcopy.
644 (do_scrub_next_char): For \", return " not '.
645 (symbol_chars): Now const.
647 * expr.c (operand): If not LOCAL_LABELS_FB, don't look for "0f"
648 and "0b". If LOCAL_LABELS_DOLLAR, check for "0$".
650 * config/obj-coff.h: Don't use #elif.
652 * config/ho-sunos.h: Don't include sys/stdtypes.h; 4.0.3 doesn't
653 have it. (Reported by Noah Friedman, friedman@gnu.ai.mit.edu.)
655 Wed Dec 16 12:12:33 1992 Ian Lance Taylor (ian@cygnus.com)
657 * write.c, obj-ieee.c: don't define SUB_SEGMENT_ALIGN if it is
660 Tue Dec 15 12:40:11 1992 Steve Chamberlain (sac@thepub.cygnus.com)
662 * app.c (do_scrub_begin): allow single quote strings if so
665 * config/*z8k*: checkpoint
667 Sun Dec 13 00:04:38 1992 Ian Lance Taylor (ian@cygnus.com)
669 * read.c (read_a_source_file): avoid calling xmalloc (0).
671 Sat Dec 12 15:26:34 1992 Ian Lance Taylor (ian@cygnus.com)
673 * listing.c: Call xmalloc, not malloc; don't declare malloc.
675 * Changes to support SCO 3.2v4:
676 * read.c (s_align_bytes, s_align_ptwo): If not SEG_DATA or
677 SEG_BSS, fill with NOP_OPCODE.
678 * config/i386coff.mt: Add opcode/i386.h to TARG_CPU_DEPENDENTS.
679 * config/obj-coffbfd.c (do_relocs_for): Increment addr even if not
680 using ZERO_BASED_SEGMENTS.
681 (fill_section): If ZERO_BASED_SEGMENTS, set segment addresses, but
682 never set segment address for SEG_E2 (.bss) and don't write out
683 SEG_E2 contents. Set .init and .fini sections to STYP_TEXT.
684 (obj_coff_endef): Don't merge labels or symbols awaiting forward
685 definitions, and don't merge tags with non-tags. Check for .bf
686 rather than just checking whether the second character is b and
687 the third character is f.
688 (obj_coff_val): gcc can generate values which we don't handle
689 correctly; discard information for now, since it only affects the
690 debugging information.
691 (tag_find_or_name): Don't insert tags in the symbol table.
692 (yank_symbols): Don't merge labels.
693 (write_object_file): Don't define SUB_SEGMENT_ALIGN if it is
694 already defined. Fill subsegments with NOP_OPCODE, not 0. Don't
695 set segment address if ZERO_BASED_SEGMENTS.
696 (obj_coff_section): Accept and ignore a trailing quoted string, as
697 used in AT&T i386 syntax.
698 (fixup_segment): Take segment as argument. On the i386, adjust PC
699 relative addends by the segment vaddr.
700 * tc-i386.h: Define SUB_SEGMENT_ALIGN.
701 * tc-a29k.h: Define ZERO_BASED_SEGMENTS.
702 * tc-i386.c: (i386_operand): If I386COFF, accept any segment type.
704 Tue Dec 8 00:06:48 1992 Ken Raeburn (raeburn@rtl.cygnus.com)
706 * config/obj-coffbfd.c: Include libcoff.h.
708 * version.c: Now version 1.93.
710 Mon Dec 7 00:39:09 1992 Ken Raeburn (raeburn@cygnus.com)
712 * config/tc-i386.c (md_pseudo_table): For 386bsd and linux, do
713 power-of-two alignment for .align.
715 * as.h: If BROKEN_ASSERT, just redefine `assert' to be trivial,
716 and leave everything else alone.
718 Fri Dec 4 16:58:42 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
720 * Makefile.in (as.new): Don't bother saving as.old.
722 * write.c: Conditionalize on OBJ_VMS, not VMS.
723 (magic_number_for_object_file): Don't define if OBJ_VMS.
725 * config/obj-vms.c: Changes for traditional C.
727 Thu Dec 3 01:24:07 1992 Ken Raeburn (raeburn@kr-pc.cygnus.com)
729 * config/ho-generic.h (malloc, realloc): Declare.
731 * Lots of comment/whitespace changes.
733 * write.h (struct fix): Some fields reordered, narrowed.
735 * read.c (MASK_CHAR): Define using C types, not magic number.
737 * as.c, input-file.c: Deleted some unused code.
739 * app.c, as.h: Doc fix.
741 * flonum-konst.c, flonum-mult.c: Include ansidecl.h.
743 * as.h (xmalloc): Argument is long.
745 * xmalloc.c (error): Remove declaration; as.h takes care of it.
747 * doc/as.texinfo: Regrouped documentation of some command-line
748 options. Updated options documentation for m68k. Some minor
749 wording/punctuation changes.
751 Mon Nov 30 11:42:11 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
753 * configure.in: Accept target OS "vms".
755 * symbols.c: Merged ANSI and non-ANSI function decls, using
758 * xmalloc.c: Just include as.h, don't bother trying to figure out
761 * strstr.c, strerror.c: Deleted.
762 * Makefile.in: Deleted references.
764 * config/tc-ns32k.c: Don't include header file for string
765 declarations; leave that to ho-*.h.
767 Fri Nov 27 04:11:36 1992 Ken Raeburn (raeburn at cambridge-laptop.cygnus.com)
769 * config/coff_gnu.h [TC_I860]: Guesses for reloc type values,
770 imported from FSF sources.
772 * messages.c (strerror): Declare unconditionally.
774 * as.h: Delete alloca and register definitions.
776 * config/atof-ieee.c (mask): Now const.
778 * obstack.c, obstack.h: Deleted.
780 * as.h (flag_readonly_data_in_text): New flag.
781 * as.c (main): Set it for -R.
783 * as.h (flag_suppress_warnings): New flag.
784 * as.c (main): Set it for -W.
785 * messages.c (as_warn): Check it instead of flagseen['W'].
787 * as.h (flag_always_generate_output): New flag.
788 * as.c (main): Set it for -Z.
790 * config/tc-sparc.h: Define NEED_FX_R_TYPE.
791 * config/tc-a29k.h: Ditto.
792 * write.h (struct fix): Don't conditionalize fx_r_type field on TC
795 * as.h: Merged ANSI and non-ANSI function decls, using PARAMS
797 * bignum.h, expr.h, flonum.h, frags.h, input-file.h, listing.h,
798 obj.h, output-file.h, read.h, struc-symbol.h, symbols.h, tc.h,
802 * xmalloc.c: Conditionalize on HAVE_MALLOC_H, not USG. Fold in
803 xrealloc from xrealloc.c.
804 * xrealloc.c: Deleted.
805 * Makefile.in (REAL_SOURCES, OBJS): Adjusted.
807 * configure.in: For host CPU a29k, rs6000, vax, consider using bsd
810 * config/ho-sysv.h (setbuffer, HO_USG): Deleted.
812 * config/atof-ieee.c (atof_ieee): Exponent field isn't a pointer;
813 don't initialize it with NULL.
815 * config/ho-vax.h (M_VAX): Deleted; was unused.
817 * README-vms, config/ho-vms.h, config/obj-vms.c, config/obj-vms.h:
818 New files imported from FSF version, contributed by Eric Youngdale.
819 * README-vms-dbg, config/vms: Deleted.
821 * ChangeLog, config/ChangeLog: Merged.
823 * config/*tahoe*, configure.in: Tahoe support brought in from FSF
826 * input-file.c (input_file_open): Eliminate call to setvbuf.
827 [USG] (setbuffer): Deleted macro.
829 Mon Nov 23 11:00:16 1992 Ken Raeburn (raeburn@cygnus.com)
831 * all files: Whitespace changes for GNU indentation style, done by
832 GNU `indent'. Some cleanup still needed, especially of comments.
834 * configure.in: No te-386bsd.h file exists; don't try to use it.
836 * obj-coff.c (obj_coff_endef): Use as_warn, not fprintf.
838 * tc-m68k.c (md_assemble): Don't complain about 68000 with 68881;
839 could be doing emulation.
841 Thu Nov 19 11:47:19 1992 Steve Chamberlain (sac@thepub.cygnus.com)
844 * doc/Makefile.in, doc/all.m4, doc/as-all.texinfo, doc/as.texinfo:
847 Tue Nov 10 09:49:24 1992 Ian Lance Taylor (ian@cygnus.com)
849 * Makefile.in (as.o, obj-format.o): added dependency on subsegs.h.
851 * subsegs.h: add extern to segment_info declaration.
853 * read.h: added extern declarations for comment_chars,
854 line_comment_chars, and line_separator_chars.
855 read.c, app.c: removed definitions of comment_chars,
856 line_comment_chars, and line_separator_chars.
858 * tc-m68k.c (m68k_reg_parse): If REGISTER_PREFIX isn't defined,
859 still accept (but don't require) OPTIONAL_REGISTER_PREFIX before
861 (insert_reg): put REGISTER_PREFIX before register names before
862 putting them in the symbol table.
863 * tc-m68k.h (OPTIONAL_REGISTER_PREFIX): Define to be "%", if not
866 * obj-coffbfd.c (fill_section): set STYP_NOLOAD bit for .bss
869 * atof-ieee.c, atof-ns32k.c, tc-*.c: made EXP_CHARS, FLT_CHARS,
870 comment_chars, line_comment_chars and line_seperator_chars
871 consistently const, and always initialized them. Included read.h.
873 Thu Nov 5 17:55:41 1992 Jim Wilson (wilson@sphagnum.cygnus.com)
875 * tc-sparc.c (sparc_ip): Add code to flag error if an absolute
876 constant will not fit in an immediate field.
877 (md_apply_fix, RELOC_BASE13 case): Check for relocation overflow.
879 Wed Nov 4 07:50:46 1992 Ken Raeburn (raeburn@cygnus.com)
881 * obj-coff.c (callj_table): Delete global variable.
882 (obj_emit_relocations): Define it locally here, and only if
885 * tc-m68k.c (m68k_reg_parse): Underscore is part of a symbol name.
886 (m68k_ip): Don't warn about bignum used as float bit-pattern.
888 * obj-coff.c: Replaced ANSI and non-ANSI function declarations
889 with a single set using PARAMS macro.
891 * tc-i960.c (tc_bout_fix_to_chars): Bit-field fixups want a length
894 * tc-i960.c: Missed a couple of 0->NO_RELOC conversions.
896 * tc-i960.h (N_BALNAME, N_CALLNAME): Define as char-type values,
897 so widening works consistently.
899 Wed Oct 28 08:52:34 1992 Ken Raeburn (raeburn@cygnus.com)
901 * version.c: Put conditional "const" before version_string, not
902 before dummy function for VMS. Now version 1.91.03.
904 * app.c (do_scrub_next_char): Need double-\ before `000' to show
905 printed rep of null character.
907 Fri Oct 23 14:40:38 1992 Ian Lance Taylor (ian@cygnus.com)
909 * obj-coffbfd.c (write_object_file): check return value of
912 Tue Oct 20 12:18:08 1992 Ian Lance Taylor (ian@cygnus.com)
914 * Support for i386-sysv.
915 obj-coffbfd.c (do_relocs_for, write_object_file): set segment
916 addresses to reasonable sizes. New define ZERO_BASED_SEGMENTS can
917 be used to set them all to zero as was done before.
918 (fill_section): segment addresses now set in write_object_file.
919 (fill_section): Don't set STYP_NOLOAD for .bss section.
920 (fixup_segment): 386 uses strange common symbol format.
921 tc-i386.c (tc_coff_fix2rtype): use R_DIR32, not R_RELLONG, for
922 compatibility with SVR3.2 linker.
923 * configure.in: i386-sysv and i386-sco use coffbfd.
925 * app.c (do_scrub_next_char): discard whitespace after a label.
927 Sat Oct 10 12:33:45 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
929 * configure.in: differentiate between SunOS 4 and Solaris2 for Sun4
930 hosts, use the sysv configuration for solaris2
932 Mon Oct 5 09:28:57 1992 Steve Chamberlain (sac@thepub.cygnus.com)
934 fix i960+non-bfd coff bit rot.
935 * obj-coff.c (c_dot_file_symbol, obj_coff_ln, obj_coff_line):
936 support for C source listings. (obj_coff_endef): look in the right
937 part of the symbol for the symbol name
939 * tc-m68k.c (get_num): make it work for all segments, not just the
942 Mon Oct 5 03:30:36 1992 Mark Eichin (eichin at tweedledumber.cygnus.com)
944 * configure.in: recognize i386-*-bsd emulation.
946 Thu Oct 1 23:05:12 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
948 * configure.in: use the cpu-vendor-os triple for host and target
950 Tue Sep 29 12:22:52 1992 Steve Chamberlain (sac@thepub.cygnus.com)
952 * obj-coffbfd.c (write_object_file): don't fixup for the z8k
953 * tc-z8k.c: lots of bug fixes
955 Tue Sep 29 10:51:55 1992 Ian Lance Taylor (ian@cygnus.com)
957 * tc-i960.h, tc-i960.c: avoid the ANSI preprocessor addition
958 #elif, since it is not supported by old compilers.
959 ho-rs6000.h, tc-m68k.c: the native RS/6000 compiler miscompiles a
960 couple of expressions in tc-m68k.c.
962 Mon Sep 28 21:18:24 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
964 * read.c (cons): If NO_RELOC is defined, use it.
966 * tc-i960.c (get_cdisp): Use NO_RELOC, not 0, in call to fix_new.
968 Fri Sep 25 18:18:52 1992 Ian Lance Taylor (ian@cygnus.com)
970 * tc-m68k.h: if M68KCOFF, define DOT_LABEL_PREFIX (to require
971 local labels to start with a .) and set REGISTER_PREFIX to %.
972 tc-m68k.c (m68k_reg_parse): accept REGISTER_PREFIX if defined.
974 Fri Sep 25 17:53:43 1992 John Gilmore (gnu@cygnus.com)
976 * messages.c: Comment changes.
978 Fri Sep 25 14:12:58 1992 Ken Raeburn (raeburn@kyriath.cygnus.com)
980 * as.h: Test if __STDC__ is defined only, don't test its value.
981 * messages.c: If __STDC__ is not defined, define NO_STDARG.
983 Thu Sep 24 12:42:32 1992 Brendan Kehoe (brendan@rtl.cygnus.com)
985 * listing.c (debugging_pseudo): Add stabs and stabn as things to
988 Tue Sep 22 13:02:07 1992 Sean Eric Fagan (sef@cygnus.com)
990 * obj-coffbfd.c (do_relocs_for,fill_section): now allocate all
991 sections starting from zero, rather than making them consecutive.
992 This makes subsequent reloc calculations easier, esp if the object
993 format doesn't understand addends. (obj_coff_lcomm): (maybe temporarily)
994 allocate lcomm in .data rather than in .bss. It seems that some
995 tools can't cope with a non-zero sized bss before linkage.
997 Tue Sep 22 15:10:51 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
999 * tc-m68k.c: Replace "enum m68k_architecture" with "int"
1000 throughout. That enum no longer means what we thought it meant.
1002 * tc-m68k.c (md_assemble, md_parse_option): Handle new
1003 "-mno-688[58]1" options.
1005 * tc-m68k.c: Added CPU32 support.
1007 Fri Sep 18 08:02:18 1992 Steve Chamberlain (sac@thepub.cygnus.com)
1009 * tc-m68k.c (m68k_ip): An(disp) is not pc relative.
1011 Tue Sep 15 17:25:05 1992 Jim Wilson (wilson@sphagnum.cygnus.com)
1013 * Makefile.in (as.new): Remove dependence on LOCAL_LOADLIBES.
1014 Change LIBDEPS dependence to LIBS.
1016 Tue Sep 15 15:32:02 1992 Ian Lance Taylor (ian@cygnus.com)
1018 * Makefile.in (install): if $(tooldir) exists, install as in
1021 Sun Sep 13 20:30:10 1992 Ian Lance Taylor (ian@cygnus.com)
1023 * Added WARN_SIGNED_OVERFLOW_WORD define to give an error if any
1024 .word is < -32768 or > 32767. The -J flag causes the error to be
1025 ignored. This is to catch over-sized switches generated by gcc on
1026 systems which don't support the broken .word hack.
1027 as.c (main): permit -J if WARN_SIGNED_OVERFLOW_WORD.
1028 write.c (fixup_segment): check for signed .word overflow if
1029 WARN_SIGNED_OVERFLOW_WORD.
1031 * write.c (fixup_segment): fixed missing parens in expression
1032 checking for byte or word overflow.
1034 * obj-coffbfd.h: define WARN_SIGNED_OVERFLOW_WORD.
1035 obj-coffbfd.c (fixup_segment): check for signed .word overflow if
1036 WARN_SIGNED_OVERFLOW_WORD.
1038 * obj-coffbfd.c (fixup_segment): fixed missing parens in
1039 expression checking for byte or word overflow.
1041 Fri Sep 11 10:21:04 1992 Steve Chamberlain (sac@thepub.cygnus.com)
1043 Support for i386 coff
1044 * obj-coffbfd.h : added stuff
1045 * tc-i386.c (tc_coff_fix2rtype): new function
1046 * tc-i386.h : new coff defines
1048 Thu Sep 10 09:23:15 1992 Ian Lance Taylor (ian@cygnus.com)
1050 * input-scrub.c (input_scrub_push): call input_file_begin, not
1052 messages.c (as_perror): print ": " between the passed in error and
1053 the strerror, like perror does.
1055 Wed Sep 9 11:06:25 1992 Ian Lance Taylor (ian@cygnus.com)
1057 * Makefile.in: use gas_target instead of modifying target_cpu.
1058 From Steve Chamberlain:
1059 Makefile.in: Handle m68*-*-coff*.
1060 read.c, read.h: add mult argument to s_space
1062 * tc-m68k.c (m68k_ip, m68k_ip_op, get_num, try_moto_index): merge
1063 Motorola and MIT syntax; gas can now assemble either type of
1065 tc-m68kmote.c, tc-m68kmote.h: removed now superfluous files.
1066 From Steve Chamberlain:
1067 m68kcoff.mt: for m68k COFF.
1068 obj-coffbfd.c: (fixup_mdeps) added
1069 (size_section) removed bad sanity check
1070 (fill_section) added rs_machine_dependent case
1071 (write_object_file) call fixup_mdeps
1072 (fixup_segment) set fx_subsy to 0.
1073 obj-coffbfd.h: define WORKING_DOT_WORD (too hard to support) and
1075 tc-m68k.c, config/tc-m68k.h: added m68k COFF support and Motorala
1078 Tue Sep 8 17:10:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
1080 * Makefile.in (LIBS): Include opcode library.
1082 Fri Sep 4 18:20:56 1992 Ken Raeburn (raeburn@cygnus.com)
1084 * config/tc-m68k.c (get_num, case SEG_BIG): If only small integers
1085 including zero are accepted, pass +0.0.
1087 Sun Aug 30 21:24:46 1992 Ian Lance Taylor (ian@cygnus.com)
1089 * Makefile.in: map "as" through program_transform_name when
1092 * doc/Makefile.in: map "as" through program_transform_name when
1095 Sat Aug 29 12:11:12 1992 Jim Wilson (wilson@sphagnum.cygnus.com)
1097 * Makefile.in (as.new): Depend on LOCAL_LOADLIBES.
1099 Fri Aug 28 16:25:22 1992 Ian Lance Taylor (ian@cygnus.com)
1101 * obj-bout.h, obj-bout.c (obj_header_append, obj_symbol_to_chars),
1102 tc-i960.c (md_ri_to_chars): Always output bout object file in
1103 little endian byte order (used to use endianness of host).
1105 Tue Aug 25 15:50:48 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
1107 * config/tc-m68k.c (init_table): Now const. Always include 68851
1108 data, so that "bc" is available to 68040 cache instructions.
1109 Added "tt0", "tt1", and 68ec030 variants.
1110 (md_assemble): Complain if 68000 (only) and 68881 are specified.
1111 (enum _register): Added TT0, TT1.
1112 (m68k_ip, cases '3' and 't'): Handle new operand type codes. Pass
1113 line number correctly in "internal error" messages. Don't print
1114 architecture-mismatch message for operand errors.
1116 From Colin Smith (colin@wrs.com):
1117 * config/tc-m68k.c (m68k_ip, case '_'): Use addword twice rather
1118 than install_operand.
1120 Tue Aug 25 15:13:48 1992 Steve Chamberlain (sac@thepub.cygnus.com)
1122 * listing.c (buffer_line): rewind to the start of include
1123 files, they might be included twice.
1125 * z8k.c, z8k.h, z8k.mt: z8000 support stuff
1127 Mon Aug 24 12:45:43 1992 Ian Lance Taylor (ian@cygnus.com)
1129 * Makefile.in: defined TARGET_CPU for C code so that it can choose
1130 one element of a family.
1132 * tc-m68k.c: use TARGET_CPU to choose default cpu type.
1134 * te-generic.h: default to LOCAL_LABELS_DOLLAR and LOCAL_LABELS_FB
1135 so that we can assemble hand-written libgcc code.
1137 Fri Aug 21 14:38:44 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
1139 * messages.c (as_warn): Use fputs, not fprintf, with a buffer that
1140 has already been formatted (but may still contain %-characters).
1143 Wed Aug 19 11:20:59 1992 Ian Lance Taylor (ian@cygnus.com)
1145 * tc-m68k.c, tc-m68kmote.c: the cas2 instruction is supposed to be
1146 written with indirection on the last two operands, which can be
1147 either data or address registers. Added a new operand type 'r'
1148 which accepts either register type. Added '(' to notend stuff in
1149 tc-m68kmote.c to accept (a0):(a2) in cas2 instruction.
1151 Wed Aug 19 09:25:09 1992 Ken Raeburn (raeburn@cygnus.com)
1153 * as.h (enum _relax_state): Start off at one, not zero, to better
1154 catch uninitialized-variable errors.
1155 (linkrelax): Declare new variable.
1157 * messages.c (warning_count, error_count): Default initializer is
1160 * write.c: Merged some declarations, using PARMS macro.
1161 (text_frag_root, data_frag_root, bss_frag_root, text_last_frag,
1162 data_last_frag): No longer static.
1163 (write_object_file, case rs_align or rs_org): If HANDLE_ALIGN is
1164 defined, call it. Change segments before calling fixup_segment.
1165 (relax_align): If linkrelax, provide extra padding.
1167 * obj-bout.c (obj_emit_relocations): Emit alignment relocs despite
1168 their not having symbols associated.
1170 * tc-i960.c (norelax, instrument_branches): Default initializer is
1172 (linkrelax): Delete variable definition.
1173 (mem_fmt): Call fix_new with NO_RELOC.
1174 (tc_bout_fix_to_chars): Handle alignment relocs.
1175 (i960_handle_align): New function.
1176 * tc-i960.h (linkrelax): Delete declaration.
1177 (HANDLE_ALIGN): New macro; calls i960_handle_align.
1178 (NEED_FX_R_TYPE, NO_RELOC): New macros.
1180 Tue Aug 18 14:59:21 1992 Ken Raeburn (raeburn@cygnus.com)
1182 * config/sparc.mt: New file. Grab sparc opcode table from bfd
1185 Tue Aug 18 14:16:38 1992 Ian Lance Taylor (ian@cygnus.com)
1187 * Makefile.in: always create installation directories. Removed
1188 MINUS_G, set CFLAGS to default to -g, added FLAGS_TO_PASS, passed
1189 FLAGS_TO_PASS to recursive makes.
1191 * doc/Makefile.in: always create installation directories.
1193 Mon Aug 17 15:09:56 1992 Steve Chamberlain (sac@thepub.cygnus.com)
1195 * input-scrub.c (input_scrub_pop, input_scrub_push): memcpy was
1196 being used with args swapped, causing occasional lossage when
1197 refilling buffers after an include file.
1199 Mon Aug 17 13:18:51 1992 Ken Raeburn (raeburn@cygnus.com)
1201 * messages.c (as_tsktsk): Use correct ANSI form for stdarg
1202 version. Discard bogus DONTDEF version.
1203 (as_warn, as_bad, as_fatal): Likewise.
1205 Fri Aug 14 18:31:14 1992 Ken Raeburn (raeburn@cygnus.com)
1207 * config/tc-m68k.c (m68k_ip): If instruction is invalid for the
1208 selected architecture, print a message saying so and listing what
1209 processors support it, rather than saying "operands mismatch".
1211 Thu Aug 13 13:53:19 1992 Ken Raeburn (raeburn@cygnus.com)
1213 * as.h [BROKEN_ASSERT]: If defined, turn off all assertion checks.
1215 * config/ho-rs6000.h (M_RS6000): Don't define it.
1217 (BROKEN_ASSERT): Define it if not __STDC__.
1219 Tue Aug 11 12:58:14 1992 Ken Raeburn (raeburn@cygnus.com)
1221 * sparc.mt: New file.
1223 Mon Aug 10 14:37:08 1992 Per Bothner (bothner@cygnus.com)
1225 * tc-m68k.c: ".align N" means align to N-byte boundary *only*
1226 if TN_SUN3; otherwise align to 2**N-byte bounary.
1228 Thu Aug 6 12:10:39 1992 Steve Chamberlain (sac@thepub.cygnus.com)
1230 * read.c (s_fill): make the .fill size clamped error a warn and
1231 fix bug where 0's were always placed.
1233 * config/tc-h8300.c: if a :8 is seen after an operand, fill top
1234 two bytes of any constant with 0xff:
1236 Wed Aug 5 12:02:40 1992 Steve Chamberlain (sac@thepub.cygnus.com)
1238 * config/tc-m68k.c (md_pseudo_table): fix the .align thing
1239 the right way; for just the 68k. Sun 3 .align is nbytes, not ptwo.
1241 Wed Aug 5 01:54:34 1992 John Gilmore (gnu at cygnus.com)
1243 * tc-m68k.c (try_index): Error if index scaling specified and
1244 assembling for an older CPU than a 68020.
1246 Sat Aug 1 19:10:13 1992 Ken Raeburn (raeburn@cygnus.com)
1248 * config/tc-sparc.c (tc_aout_fix_to_chars): If pc-relative, take
1249 fx_offset into account.
1251 Fri Jul 31 21:53:28 1992 Ken Raeburn (raeburn@cygnus.com)
1253 * configure.in (mips host): Accept "ultrix" with version number.
1255 * expr.c (floating_constant): Separate "=-" to avoid confusing
1256 ancient or broken compilers.
1258 * config/tc-m68k.c (m68k_ip): Mismatch error could also indicate
1259 processor/opcode mismatch, so reword the error message.
1260 (md_assemble): If no CPU has been set (even if FPU/PMMU
1261 characteristics have been), default to 68020. Don't need extra
1262 quotes around error string.
1264 Fri Jul 31 12:26:34 1992 Jim Wilson (wilson@sphagnum.cygnus.com)
1266 * read.c (potable): Revert sac's incorrect change made Jul 13.
1267 Align really is supposed to be ptwo not nbytes.
1269 Mon Jul 20 02:51:59 1992 D. V. Henkel-Wallace (gumby@cygnus.com)
1271 * Makefile.in: _Do_ include libiberty. (from sef)
1273 Fri Jul 17 15:15:28 1992 Ken Raeburn (raeburn@cygnus.com)
1275 * expr.c (integer_constant): Handle "0f" and "0b" label references
1278 Thu Jul 16 08:20:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
1280 * write.c (fixup_segment): if relaxing, don't do anything.
1281 * config/obj-bout.[ch] : maintain the a_relaxable file header info
1282 * config/tc-i960.c: new option -linkrelax
1284 Mon Jul 13 14:11:36 1992 Steve Chamberlain (sac@thepub.cygnus.com)
1286 * expr.c (expr): allow SEG_BSS in expressions
1287 * read.c (potable): align should be nbytes, not ptwo!
1288 * write.c (write_object_file): extra glue for new bss attributes
1289 (relax_segment): SEG_BSS is ok now
1290 * config/tc-m68k.c (m68k_ip_op): can now parse more @( modes
1292 Mon Jul 6 17:09:32 1992 Steve Chamberlain (sac@cygnus.com)
1294 * obj-coffbfd.c (fill_section): mark .lit sections as STYP_LIT
1296 Mon Jun 1 16:20:22 1992 Michael Tiemann (tiemann@cygnus.com)
1298 * configure.in: recognize m680x0 as having sun3 emulation mode for
1299 vxworks environment.
1302 Tue Jun 30 20:25:54 1992 D. V. Henkel-Wallace (gumby@cygnus.com)
1304 * Makefile.in: Add program_suffix (parallel to program_prefix)
1306 Wed Jun 24 10:57:54 1992 Steve Chamberlain (sac@thepub.cygnus.com)
1308 * app.c (process_escape): new function to handle escapes the right
1309 way, (do_scrub_next_char): use new function
1310 * cond.c (s_ifdef): do ifdef/ifndef right
1311 * read.c (s_fill): make the , expressions optional like the doc
1313 * config/tc-h8300.[ch]: better warnings
1315 Tue Jun 9 07:54:54 1992 Steve Chamberlain (sac@thepub.cygnus.com)
1317 * subsegs.c (subsegs_begin): create bss0_frchainP in the same was
1320 * write.c (write_object_file): various changes to handle data in
1321 the BSS segment in much the same was as stuff in the DATA segment.
1323 * tc-m68k.c (m68kip): Fix typo so that only arch's >=68020 do
1324 pcrel data stuff. (md_estimate_size_before_relax): when relaxing a
1325 68010 bxx into a bra+6 jmpxx, put the bytes of the jmp opcode into
1326 the right place. (s_bss): Don't put .bss stuff into SEG_DATA, put
1329 Thu Jun 4 11:59:13 1992 Steve Chamberlain (sac@thepub.cygnus.com)
1331 * expr.c(expr): allow SEG_REGISTER in expressions.
1332 * read.c(pseudo_set): register expressions can be the source of a
1334 * subsegs.c (subseg_new): Now -R forces all changes to SEG_DATA to
1335 goto SEG_TEXT (if a.out)
1336 * write.c (write_object_file): If a.out don't use the old way for
1338 * config/obj-a.out (s_sect): complain if the user tries to use a
1339 subsegment with a value which might interfere with out -R hackery.
1340 * config/tc-m68k.c (m68k_reg_parse): lookup names in symbol table
1341 rather than use ugly if tree. (init_regtable): insert register
1342 names into symbol table.
1344 Tue Jun 2 16:47:09 1992 Steve Chamberlain (sac@cygnus.com)
1346 * write.c (write_object_file): keep the fix_tail clean, which
1347 fixes a bug in -R where relocations were being lost.
1349 Mon Jun 1 16:20:22 1992 Michael Tiemann (tiemann@cygnus.com)
1351 * configure.in: recognize m680x0 as having sun3 emulation mode for
1352 vxworks environment.
1354 Sun May 31 05:33:00 1992 david d `zoo' zuhn (zoo@cygnus.com)
1356 * configure.in: recognize m680x0 as an m68k
1358 Thu May 28 11:22:02 1992 Jim Wilson (wilson@sphagnum.cygnus.com)
1360 * configure.in: Recognize sparclite as a sparc variant.
1362 * tc-sparc.c: Use new ARCHITECTURES_CONFLICT_P macro. Mention new
1365 Tue May 26 16:47:56 1992 Steve Chamberlain (sac@thepub.cygnus.com)
1367 * config/tc-a29k.c: lint
1368 * listing.c, expr.c: patches from Andrew Smith
1370 Thu May 14 17:22:48 1992 K. Richard Pixley (rich@rtl.cygnus.com)
1372 * doc/Makefile.in: use m4 rather than gm4.
1374 Mon May 4 18:56:19 1992 Steve Chamberlain (sac@thepub.cygnus.com)
1376 * obj-coffbfd.c: use is a synonym for section, (do_relocs_for):
1377 calc the base of relocs correctly.
1378 * tc-a29k.c (parse_operand): allow expressions to be in any section.
1380 Mon Apr 27 13:13:31 1992 K. Richard Pixley (rich@cygnus.com)
1382 * as.c, write.c: use -K rather than -k for the broken word warning
1385 Tue Apr 21 13:35:30 1992 K. Richard Pixley (rich@cygnus.com)
1387 * Makefile.in: do not print recursion lines.
1389 Wed Apr 15 21:19:31 1992 K. Richard Pixley (rich@rtl.cygnus.com)
1391 * Makefile.in: the tooldir copy of gas goes directly in tooldir.
1393 Tue Apr 14 14:50:22 1992 Ken Raeburn (Raeburn@Cygnus.COM)
1395 * write.c (write_object_file): For b.out format, round up section
1396 start addresses to match required alignment.
1398 Thu Apr 9 05:45:29 1992 Ken Raeburn (Raeburn@Cygnus.COM)
1400 * Makefile.in (install): Install into $(tooldir)/bin, since that's
1401 where gcc looks for it.
1403 Tue Apr 7 15:12:15 1992 Sean Eric Fagan (sef@cygnus.com)
1405 * Makefile.in: Changed some lines to be less confusing for some
1408 * input-file.c: Conditionalize on _IOFBF, not VMS.
1410 * read.c, write.c: Change a series of ifdef/elif to
1411 ifdef/else/ifdef etc.
1413 Fri Mar 27 12:21:16 1992 K. Richard Pixley (rich@cygnus.com)
1415 * symbols.c (fb_label_init): fix sizeof to memset.
1417 Fri Mar 13 15:45:44 1992 K. Richard Pixley (rich@cygnus.com)
1419 * Makefile.in: install the man page.
1421 * Makefile.in: pass down MAKEINFO explicitly on info.
1423 * doc/Makefile.in: use $(MAKEINFO) not makeinfo.
1425 Fri Mar 13 08:03:03 1992 Steve Chamberlain (sac@thepub.cygnus.com)
1427 * flonum-const.c: renamed flonum-konst.c to stop dos name
1430 Thu Mar 12 04:42:38 1992 K. Richard Pixley (rich@cygnus.com)
1432 * tc-m68k.h, te-sun3.h: moved LOCAL_LABELS_FB definition from
1433 tc-m68k.h to te-sun3.h.
1435 Wed Mar 11 23:32:42 1992 K. Richard Pixley (rich@cygnus.com)
1437 * configure.in: vxworks68 gets te-sun3.h.
1439 * expr.c: remove limitation that local_labels_dollar or
1440 local_labels_fb must be < 10.
1442 * symbols.c: remove local_labels_dollar, replace with a function
1443 interface for a sparse array. All users adjusted.
1445 * te-sun3.h: add LOCAL_LABELS_DOLLAR.
1447 Sat Mar 7 00:06:25 1992 K. Richard Pixley (rich@rtl.cygnus.com)
1449 * doc/Makefile.in: commented out line for building as-all.texinfo.
1452 * doc/as.texinfo, doc/as-all.texinfo: added menu item hooks.
1454 Fri Mar 6 21:57:18 1992 K. Richard Pixley (rich@cygnus.com)
1456 * Makefile.in: added check target.
1458 Tue Mar 3 15:45:56 1992 K. Richard Pixley (rich@rtl.cygnus.com)
1460 * Makefile.in: added tooldir and program_prefix.
1462 Sun Mar 1 04:43:19 1992 Michael Tiemann (tiemann@cygnus.com)
1464 * write.{c,h} (fix_new): Make these declarations consistent.
1466 Sat Feb 29 13:59:10 1992 Michael Tiemann (tiemann@cygnus.com)
1468 * Makefile.in (strerror.o): Add rule so that broken Sun make can
1471 Wed Feb 26 19:26:28 1992 Steve Chamberlain (sac at thepub.cygnus.com)
1473 * read.c, obj-coffbfd.c : fix h8300 specific bit rot
1475 * expr.c (operand): if can't work out what sort of operand it is,
1476 then look through FLT_CHARS for a hint.
1478 Wed Feb 26 18:04:40 1992 K. Richard Pixley (rich@cygnus.com)
1480 * Makefile.in, configure.in: removed traces of namesubdir,
1481 -subdirs, $(subdir), $(unsubdir), some rcs triggers. Forced
1482 copyrights to '92, changed some from Cygnus to FSF.
1484 * doc/Makefile.in, doc/configure.in: removed traces of namesubdir,
1485 -subdirs, $(subdir), $(unsubdir), some rcs triggers. Forced
1486 copyrights to '92, changed some from Cygnus to FSF.
1488 Tue Feb 25 14:17:15 1992 Steve Chamberlain (sac at rtl.cygnus.com)
1490 * expr.c: If an expression is single comma, then return with
1491 SEG_ABSENT rather than an error - since the sparc front end does
1492 really strange things with things like fbge,a
1494 * as.h: include bfd.h if using many sections
1495 * expr.c: LOCAL_LABELS_FB had been changed to lower case - so
1496 local labels didn't work.
1497 * listing.c (list_symbol_table): don't core dump when there's no
1499 * write.c, write.h: call fix_new with the right number of args on
1501 * config/tc-h8300.[ch] : fix bugs reported by HMSI, and make
1504 Sat Feb 22 12:26:28 1992 Steve Chamberlain (sac at rtl.cygnus.com)
1506 * app.c: MRI compatibility - allow single quote to start a string.
1507 * as.c: fix typo recently introduced.
1508 * as.h : Don't include aout/reloc.h - it's not right for COFF!
1509 * expr.c: Much rewriting, to accomodate MRI syntax for
1510 expressions. Also easier to read now.
1511 * listing.c: Put back defuns
1512 * read.c: modified to accept MRI syntax, put back listing pseudo
1513 ops so that an assembler built with NO_LISTING ignores list ops
1515 * write.c, write.h: fixs - only keep a reloc type in a fix if the target
1516 machine is a SPARC or a 29K.
1517 * config/obj-aout.c: added s_sect pseudo op
1518 * config/obj-coffbfd.c: lints, set the filehdr flags right and
1519 fill in the timestamp.
1520 * config/obj-coffbfd.h: Since we don't include aout/reloc.h
1521 anymore, define all the relocs which the tc-<x> bit will use so we
1522 can translate from them to the coff types.
1523 * config/tc-a29k.c: reloc_type isn't ane enum any more
1524 * config/tc-m68k.c: Added NO_RELOC definition.
1526 Fri Feb 21 06:21:07 1992 K. Richard Pixley (rich@rtl.cygnus.com)
1528 * Makefile.in: put header files before C source for TAGS; remove
1529 references to non-existent syscalls.h.
1531 * read.c, write.c subsegs.c: back out the .bss changes.
1533 * obj-aout.c: do not include stab.gnu.h if NO_LISTING.
1535 * tc-i860.c, a.out.gnu.h: move i860 relocs to a proper place.
1539 Fri Feb 21 01:08:48 1992 Minh Tran-Le (TRANLE@INTELLICORP.COM)
1541 * symbols.c (local_label_name): symbols now start with ^A.
1543 * read.c, subsegs.c, write.c obj-coff.c: added handling of
1544 `.bss` pseudo op for unitialized data. The new gcc (1.37.9x)
1545 generate these sections. .align: will use NOP_OPCODE or 0
1546 for padding. This is just for being nice to the
1549 * expr.c (operand): changed to generate local label "\001L0"
1550 starting with a ^A so that it is recognized as a local label.
1552 * as.c (perform_an_assembly_pass): zero bss_fix_root, too.
1554 * tc-i386.c: tc-i386.c: added handling of the following opcodes:
1555 i/o opcodes - inb, inw, outb and outw. string manipulation with
1556 att syntax - scmp, slod, smov, ssca, ssto.
1558 * obj-coff.c: (for aix386) Moved the symbols .text, .data and .bss
1559 to just after .file .
1561 In obj_crawl_symbol_chain() where it tries to put the external
1562 symbols apart, with the condition:
1563 (!S_IS_DEFINED(symbolP) &&
1564 !S_IS_DEBUG(symbolP) &&
1565 !SF_GET_STATICS(symbolP))
1566 it was moving too many symbols out. So I switch it back to the
1568 (S_GET_STORAGE_CLASS(symbolP) == C_EXT && !SF_GET_FUNCTION(symbolP))
1570 In obj_emit_relocations() added the conditional on KEEP_RELOC_INFO
1571 so that we don't use the F_RELFLG which make the linker complain
1572 that somebody has stripped the relocation info.
1574 Also, the AIX ld program require that the relocation table
1575 is sorted by r_vaddr like the standard ATT assembler does.
1577 [he also changed the sizeof(struct ...)'s into the coff
1578 style FOOSZ macros. I'm not sure this is right, but I can't
1579 remember why. xoxorich.]
1581 Fri Feb 21 01:08:48 1992 K. Richard Pixley (rich@cygnus.com)
1583 * Makefile.in, configure.in, doc: use the doc. Build it, install
1586 Tue Feb 18 02:21:25 1992 K. Richard Pixley (rich at cygnus.com)
1588 * read.c: white space and comments only.
1590 * configure.in: use the new atof-ns32.c for ns32k.
1592 * write.c: comment change only.
1594 * tc-m88k.[hc]: pulled in from hack's unfinished work. These
1595 aren't yet integrated.
1597 * tc-i860.[hc]: blew off the dust. Something must still be done
1598 about conflicting relocation types.
1600 * tc-ns32k.c: Replaced previous tc_aout_fix_to_chars stub with the
1603 * tc-i960.c, tc-sparc.c: white space and comments only.
1605 * tc-a29k.h: delete duplicate macro definition.
1607 * new file atof-ns32k.c copied from hack's last unreleased gas.
1609 Mon Feb 17 07:51:06 1992 K. Richard Pixley (rich at cygnus.com)
1611 * config/tc-ns32k.c: actually make tc_aout_fix_to_chars work
1614 * nearly everything. flush ChangeLog, package as gas-1.92.1.
1615 ChangeLog's prior to this are sketchy at best. I have logs.
1616 They just aren't ChangeLogs.