gas/ChangeLog

   1 Tue Apr  9 15:17:53 2002  J"orn Rennecke <joern.rennecke@superh.com>
   2
   3         * config/tc-sh.c (md_apply_fix3): Don't zero relocations on big
   4         endian hosts.
   5
   6 2002-04-04  Alan Modra  <amodra@bigpond.net.au>
   7
   8         * dep-in.sed: Cope with absolute paths.
   9         * Makefile.am (dep.sed): Subst TOPDIR.
  10         Run "make dep-am".
  11         * Makefile.in: Regenerate.
  12
  13 2002-04-04  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
  14
  15         * config/tc-mips.c (mips16_macro_build): Cast type mismatch.
  16         (mips_ip): Remove unused variable.
  17         (md_apply_fix3): Cast signed/unsignes mismatches. Replace
  18         unsigned char with bfd_byte.
  19         (s_file): Remove unused variable.
  20         (s_mips_ent): Likewise.
  21
  22 2002-04-03  Tom Rix  <trix@redhat.com>
  23
  24         * config/tc-d10v.c (d10v_insert_operand): Fix warning in as_bad_where.
  25         (build_insn): Same.
  26         (find_opcode): Fix warning in as_warn.
  27         * config/tc-d10v.h: Update Copyright.
  28
  29 2002-04-03  Alan Matsuoka <alanm@redhat.com>
  30             Tom Rix  <trix@redhat.com>
  31
  32         From Jeff Knaggs <jknaggs@redhat.com>
  33         * config/tc-d10v.c (check_resource_conflict): New function to
  34         check for resource conflicts.
  35
  36         From Jason Eckhardt  <jle@redhat.com>
  37         * config/tc-d10v.c (build_insn): Check for unresolved imm4 or
  38         imm3 fields.
  39         * config/tc-d10v.c (find_opcode): Emit a warning if one of the
  40         reserved control registers is used.
  41         * config/tc-d10v.c (build_insn): Check for unresolved imm4 or
  42         imm3 fields.
  43
  44         From 2001-03-28  Diego Novillo  <dnovillo@redhat.com>
  45         * tc-d10v.c (parallel_ok): Prevent packing only if the first
  46         instruction cannot be packed.
  47
  48         From 2001-03-30  Diego Novillo  <dnovillo@redhat.com>
  49         * gas/config/tc-d10v.c (check_resource_conflict): Only check
  50         write-write conflicts.
  51         (md_assemble): Reformat introductory comment.
  52         * opcodes/d10v-opc.c (d10v_opcodes): `btsti' does not modify its
  53         arguments.
  54
  55 2002-04-03  Alan Modra  <amodra@bigpond.net.au>
  56
  57         * symbols.c (resolve_symbol_value <O_uminus, O_bit_not,
  58         O_logical_not>): Derive final_seg from add_symbol.
  59         <O_multiply..O_logical_or>: More final_seg twiddles.
  60
  61 2002-04-01  Jessica Han  <jessica@cup.hp.com>
  62
  63         * config/tc-ia64.c (ia64_cons_fix_new): Handle 8 byte iplt reloc
  64         in 32-bit mode.
  65
  66 2002-03-27  Andreas Schwab  <schwab@suse.de>
  67
  68         * config/tc-i386.c (output_jump): Set fx_pcrel_adjust to size of
  69         field for pc-relative fixups.
  70         (output_disp): Likewise.
  71         (md_estimate_size_before_relax): Likewise.
  72         (tc_gen_reloc): Subtract fx_pcrel_adjust instead of fx_size for
  73         pc-relative fixups in 64bit mode.
  74
  75 2002-03-22  Alan Modra  <amodra@bigpond.net.au>
  76
  77         * config/te-aix5.h: Typo fix.
  78
  79 2002-03-21  Alan Modra  <amodra@bigpond.net.au>
  80
  81         * Makefile.am: Run "make dep-am".
  82         * Makefile.in: Regenerate.
  83         * doc/Makefile.in: Regenerate.
  84
  85 2002-03-20  Albert Chin-A-Young  <china@thewrittenword.com>
  86
  87         * config/tc-arm.c (vfp_dp_reg_required_here): Fix typo
  88         (vfp_sp_reg_pos -> vfp_dp_reg_pos).
  89
  90 2002-03-18  Alexandre Oliva  <aoliva@redhat.com>
  91
  92         * config/tc-mips.c (md_estimate_size_before_relax): Do not modify
  93         the EXTENDED bit here; report the estimate according to the
  94         current size.
  95
  96 2002-03-18  Tom Rix  <trix@redhat.com>
  97
  98         * configure.in: Add AIX 5 support.
  99         * config/tc-ppc.c (ppc_target_format): Add AIX 5 64 bit target.
 100         * config/te-aix5.h: New file. AIX 5 support.
 101         * configure: Regenerate.
 102
 103 2002-03-18  Nick Clifton  <nickc@cambridge.redhat.com>
 104
 105         * po/fr.po: Updated version.
 106
 107 2002-03-16  Andreas Jaeger  <aj@suse.de>
 108
 109         * doc/c-mips.texi (Machine Dependencies): Add new node.
 110
 111 2002-03-15  Chris G. Demetriou  <cgd@broadcom.com>
 112
 113         * config/tc-mips.c (mips_set_options): New "ase_mips3d" member.
 114         (mips_opts): Initialize "ase_mips3d" member.
 115         (file_ase_mips3d): New variable.
 116         (CPU_HAS_MIPS3D): New macro.
 117         (md_begin): Initialize mips_opts.ase_mips3d and file_ase_mips3d
 118         based on command line options and configuration defaults.
 119         (macro_build, mips_ip): Accept MIPS-3D instructions if
 120         mips_opts.ase_mips3d is set.
 121         (OPTION_MIPS3D, OPTION_NO_MIPS3D, md_longopts, md_parse_option):
 122         Add support for "-mips3d" and "-no-mips3d" options.
 123         (OPTION_ELF_BASE): Move to accomodate new options.
 124         (s_mipsset): Support ".set mips3d" and ".set nomips3d".
 125         (mips_elf_final_processing): Add a comment indicating that a
 126         MIPS-3D ASE ELF header flag should be set, when one exists.
 127         * doc/as.texinfo: Document -mips3d and -no-mips3d options.
 128         * doc/c-mips.texi: Likewise, and document ".set mips3d" and ".set
 129         nomips3d" directives.
 130
 131 2002-03-14  Hans-Peter Nilsson  <hp@bitrange.com>
 132
 133         * config/tc-mmix.c (md_estimate_size_before_relax): Don't consider
 134         a weak symbol in same section to be within reach.
 135
 136 2002-03-13  Nick Clifton  <nickc@cambridge.redhat.com>
 137
 138         * po/fr.po: Updated version.
 139
 140 2002-03-12  Andreas Schwab  <schwab@suse.de>
 141
 142         * config/tc-ia64.c (fixup_unw_records): Clear region when seeing a
 143         body record so that an error is given for misplaced .save
 144         pseudo-ops.
 145
 146 2002-03-09  Alan Modra  <amodra@bigpond.net.au>
 147
 148         * config/tc-i386.h (REX_OPCODE): Define.
 149         (REX_MODE64, REX_EXTX, REX_EXTY, REX_EXTZ): Define.
 150         (rex_byte): typedef to int.
 151         * config/tc-i386.c: Group prototypes and vars together.
 152         Formatting fixes.  Remove occurrences of "register" keyword.
 153         (true): Delete.
 154         (false): Delete.
 155         (mode_from_disp_size): Add INLINE keyword to prototype.
 156         (fits_in_signed_byte): Likewise.
 157         (fits_in_unsigned_byte): Likewise.
 158         (fits_in_unsigned_word): Likewise.
 159         (fits_in_signed_word): Likewise.
 160         (fits_in_unsigned_long): Likewise.
 161         (fits_in_signed_long): Likewise.
 162         (type_names): Constify.
 163         (intel_float_operand): Constify param.
 164         (add_prefix): Use REX_OPCODE.
 165         (md_assemble): Likewise.  Modify for changed rex_byte.
 166         (parse_insn): Split out of md_assemble.
 167         (parse_operands): Likewise.
 168         (swap_operands): Likewise.
 169         (optimize_imm): Likewise.
 170         (optimize_disp): Likewise.
 171         (match_template): Likewise.
 172         (check_string): Likewise.
 173         (process_suffix): Likewise.
 174         (check_byte_reg): Likewise.
 175         (check_long_reg): Likewise.
 176         (check_qword_reg): Likewise.
 177         (check_word_reg): Likewise.
 178         (finalize_imm): Likewise.
 179         (process_operands): Likewise.
 180         (build_modrm_byte): Likewise.
 181         (output_insn): Likewise.
 182         (output_branch): Likewise.
 183         (output_jump): Likewise.
 184         (output_interseg_jump): Likewise.
 185         (output_disp): Likewise.
 186         (output_imm): Likewise.
 187
 188 2002-03-07  Daniel Jacobowitz  <drow@mvista.com>
 189
 190         * doc/as.texinfo: Wrap @menu in @ifnottex, not @ifinfo.
 191
 192 2002-03-06  Alan Modra  <amodra@bigpond.net.au>
 193
 194         * config/tc-i386.c (tc_gen_reloc): Don't attempt to handle 8 byte
 195         relocs except when BFD64.
 196
 197         * write.c (number_to_chars_bigendian): Don't abort when N is
 198         larger than sizeof (VAL).
 199         (number_to_chars_littleendian): Likewise.
 200
 201 2002-03-05  John David Anglin  <dave@hiauly1.hia.nrc.ca>
 202
 203         * config/tc-hppa.c (md_apply_fix3): Add cast.
 204         (hppa_fix_adjustable): Adjust list of selectors using e_lrsel and
 205         e_rrsel.
 206
 207 2002-03-05  Paul Koning  <pkoning@equallogic.com>
 208
 209         * tc-pdp11.c: Use VAX float format support for PDP-11 target.
 210         (parse_ac5): New function for parsing float regs in float operand.
 211         (parse_expression): Remove attempt to make literals be octal.
 212         (parse_op_no_deferred): Support float literals.
 213         (parse_op): Reject attempts to refer to float regs.
 214         (parse_fop): New function, like parse_op but for float operand.
 215         (md_assemble): Add cases to parse float operands.  Also fix
 216         IMM3, IMM6, IMM8 cases to pick up the operand from the right spot.
 217
 218 2002-03-04  H.J. Lu <hjl@gnu.org>
 219
 220         * config/obj-elf.c (special_section): Add .init_array,
 221         .fini_array and .preinit_array.
 222
 223         * config/tc-ia64.h (ELF_TC_SPECIAL_SECTIONS): Remove
 224         .init_array and .fini_array.
 225
 226 2002-03-01  Jakub Jelinek  <jakub@redhat.com>
 227
 228         * config/obj-elf.c (elf_copy_symbol_attributes): Don't copy
 229         visibility.
 230         (obj_frob_symbol): Copy visibility.
 231
 232 2002-02-28  Jakub Jelinek  <jakub@redhat.com>
 233
 234         * config/tc-alpha.c (s_alpha_text): Use obj_elf_text for OBJ_ELF, not
 235         s_text.
 236         (s_alpha_data): Use obj_elf_data for OBJ_ELF, not s_data.
 237
 238 2002-02-27  Nick Clifton  <nickc@cambridge.redhat.com>
 239
 240         * po/es.po: Updated.
 241
 242 2002-02-26  Chris Demetriou  <cgd@broadcom.com>
 243
 244         * config/tc-mips.c (mips_need_elf_addend_fixup): For embedded-PIC
 245         only, undo the changes made on 2001-06-08, with the
 246         effect being that common or extern symbols are
 247         adjusted for embedded-PIC, but weak symbols are not.
 248         (md_estimate_size_before_relax: Likewise, with the effect
 249         that extern symbols are treated the same as weak symbols
 250         only if not embedded-PIC.
 251         (mips_fix_adjustable) Likewise, with the effect that
 252         weak or extern symbols are not adjusted for embedded-PIC.
 253         (md_apply_fix3): Tweak so that the case where value is zero
 254         is handled more correctly for embedded-PIC code.
 255
 256 2002-02-26  Nick Clifton  <nickc@cambridge.redhat.com>
 257
 258         * doc/as.texinfo (Overview): Add missing @ifset IA64
 259
 260         * configure.in (LINGUAS): Add es.po.
 261         * configure: Regenerate.
 262         * po/es.po: New file.
 263
 264 2002-02-25  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
 265
 266         * config/tc-mips.c (set_at): Fix handling of 64bit register loads.
 267         (macro): Likewise. Fix la/dla address expansions for EMBEDDED_PIC
 268         and NO_PIC cases. Code cleanup.
 269         (macro2): Fix handling of 64bit register loads.
 270
 271 2002-02-25  David Mosberger  <davidm@hpl.hp.com>
 272
 273         * doc/as.texinfo: Add entry for IA64.
 274         * doc/c-ia64.texi: New file.
 275
 276 2002-02-25  Alan Modra  <amodra@bigpond.net.au>
 277
 278         * config/tc-hppa.c: Update copyright date.
 279
 280         * doc/c-ppc.texi (PowerPC-Opts): Add -mpower4, -maltivec and -m7400
 281         Remove references to chip manufacturers.
 282         * config/tc-ppc.c (md_parse_option): Handle -mpower4 option.
 283         Correct comments.
 284         (md_show_usage): Remove references to chip manufacturers.  Mention
 285         -mpower4.
 286         (md_begin): Test power4 opcode flag bits.
 287
 288 2002-02-22  David Mosberger  <davidm@hpl.hp.com>
 289
 290         * config/tc-ia64.c (dot_restore): Issue error message of epilogue
 291         count exceeds prologue count.
 292         (md_show_usage): Describe -mconstant-gp and -mauto-pic.
 293         (unwind.label_prologue_count): New member.
 294
 295         Based on a patch by Hans Boehm <hboehm@hpl.hp.com>:
 296
 297         (get_saved_prologue_count): New function.
 298         (save_prologue_count): New function.
 299         (free_saved_prologue_count): New function.
 300         (dot_label_state): Record state label by calling save_prologue_count().
 301         (dot_copy_state): Restore prologue count by calling
 302         get_saved_prologue_count().
 303         (generate_unwind_image): Free up list of saved prologue
 304         counts by calling free_saved_prologue_counts().
 305
 306 2002-02-22  Nick Clifton  <nickc@cambridge.redhat.com>
 307
 308         * config/tc-tic54x.c: Add missing prototypes and remove ANSI style
 309         function declarations.
 310
 311 2002-02-21  Nick Clifton  <nickc@cambridge.redhat.com>
 312
 313         * NEWS: Note that GASP is now deprecated.
 314         * Makefile.am: Do not build gasp-new by default.
 315         * Makefile.in: Regenerate.
 316         * doc/Makefile.am: Do not install gasp.info.
 317         * doc/Makefile.in: Regenerate.
 318         * gas/gasp.texi: Note that gasp is now deprecated.
 319
 320 2002-02-20  Nick Clifton  <nickc@cambridge.redhat.com>
 321
 322         * NEWS: Mark 2.12 branch.
 323
 324 2002-02-19  Tom Tromey  <tromey@redhat.com>
 325
 326         * config/tc-xstormy16.h (DWARF2_LINE_MIN_INSN_LENGTH): Define.
 327
 328 2002-02-19  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
 329
 330         * config/tc-mips.c (md_parse_option): Complain about invalid -mabi
 331         option input.
 332
 333 2002-02-19  Martin Schwidefsky  <schwidefsky@de.ibm.com>
 334
 335         * config/tc-s390.c (md_parse_option): Add switches -m31 and -m64.
 336         Make bit size independent of architecture switch.
 337         (md_begin): Add warning for -m64 with -Aesa.
 338         (s390_md_end): Use renamed architecture defines.
 339
 340 2002-02-18  Daniel Jacobowitz  <drow@mvista.com>
 341
 342         * config/obj-coff.h: Check !target_big_endian, not shl, for coff-sh.
 343
 344 2002-02-16  Nick Clifton  <nickc@cambridge.redhat.com>
 345
 346         * doc/as.texinfo (Machine Dependencies): Fix typo: MMIX used
 347         instead of CRIS.
 348
 349 2002-02-15  Chris Demetriou  <cgd@broadcom.com>
 350
 351         * config/tc-mips.c (md_estimate_size_before_relax): Really
 352         make sure we treat weak like extern only for ELF.  (Fixes
 353         patch from 2001-07-25.)
 354
 355 2002-02-15  Ben Elliston  <bje@redhat.com>
 356
 357         * doc/as.texinfo: Add duplicate directory entry so that "info gas"
 358         works as expected.
 359
 360 2002-02-15  Hans-Peter Nilsson  <hp@bitrange.com>
 361
 362         * NEWS: Mention support for MMIX.
 363
 364 2002-02-13  Chris Demetriou  <cgd@broadcom.com>
 365
 366         * config/tc-mips.c (mips_need_elf_addend_fixup): Restructure into
 367         a sequence of indpendent 'if' statements for easier debugging
 368         and future modification.
 369
 370 2002-02-13  Matt Fredette  <fredette@netbsd.org>
 371
 372         * config/tc-m68k.c (md_show_usage): No longer display a
 373         hard-coded "68020" for the default CPU, instead display the
 374         canonical name of the true, configured default CPU.
 375         (m68k_elf_final_processing): Mark objects for sub-68020
 376         CPUs with the new EF_M68000 flag.
 377
 378 2002-02-13  Andreas Schwab  <schwab@suse.de>
 379
 380         * config/tc-i386.c (tc_i386_fix_adjustable): Don't adjust
 381         pc-relative relocations to merge sections in 64-bit mode.
 382
 383 2002-02-13  Ben Elliston  <bje@redhat.com>
 384
 385         * NEWS: Document floating point number handling in gasp.
 386         * gasp.c: Include <assert.h> and "xregex.h".
 387         (is_flonum): New function.
 388         (chew_flownum): Likewise.
 389         (change_base): Consume flonums from the input, where possible.
 390         * doc/gasp.texi (Constants): Document floating point numbers.
 391
 392 2002-02-12  John David Anglin  <dave@hiauly1.hia.nrc.ca>
 393
 394         * config/tc-hppa.c (hppa_fix_adjustable): Don't adjust final types
 395         that implicitly use LR and RR selectors.
 396
 397 2002-02-12  Alexandre Oliva  <aoliva@redhat.com>
 398
 399         * config/tc-mn10300.c (other_registers): Added `epsw'.  Mark `pc'
 400         and `epsw' as available on AM33 and above only.
 401         (other_register_name): Add logic to handle machine type encoded in
 402         reg_number.
 403
 404 2002-02-11  Tom Rix  <trix@redhat.com>
 405
 406         * config/tc-ppc.c (md_apply_fix3): Check for insert fop invalid for
 407         xcoff64.
 408
 409 Mon Feb 11 11:23:38 2002  Alexandre Oliva  <aoliva@redhat.com>
 410
 411         * config/tc-sparc.c (U0x80000000, U0xffffffff): New constants.
 412         Use all over.
 413
 414 Mon Feb 11 12:59:29 CET 2002  Jan Hubicka  <jh@suse.cz>
 415
 416         * i386.c (md_assemble): Support 32bit address prefix.
 417         (i386_displacement): Likewise.
 418         (i386_index_check): Accept 32bit addressing in 64bit mode.
 419
 420 2002-02-11  Alexandre Oliva  <aoliva@redhat.com>
 421
 422         * config/tc-sh.c (dot): Removed unused function.
 423
 424 2002-02-11  Alan Modra  <amodra@bigpond.net.au>
 425
 426         * Makefile.am: "make dep-am".
 427         * Makefile.in: Regenerate.
 428         * aclocal.m4: Regenerate.
 429         * config.in: Regenerate.
 430         * configure: Regenerate.
 431         * doc/Makefile.in: Regenerate.
 432
 433 2002-02-10  Richard Henderson  <rth@redhat.com>
 434
 435         * doc/c-alpha.texi: New file.
 436         * doc/Makefile.am (CPU_DOCS): Add it.
 437         * doc/all.texi, doc/as.texinfo: Add hooks for Alpha.
 438
 439 2002-02-09  Richard Henderson  <rth@redhat.com>
 440
 441         * config/tc-alpha.c (O_samegp): New.
 442         (USER_RELOC_P): Include it.
 443         (alpha_reloc_op_tag, debug_exp, find_macro_match): Add it.
 444         (md_apply_fix3): Handle BFD_RELOC_ALPHA_BRSGP.
 445         (alpha_force_relocation, alpha_fix_adjustable): Likewise.
 446         (alpha_validate_fix): New.
 447         * config/tc-alpha.h (TC_VALIDATE_FIX): New.
 448
 449 2002-02-09  Hans-Peter Nilsson  <hp@axis.com>
 450
 451         * doc/c-cris.texi: New.
 452         * doc/all.texi: @set CRIS.
 453         * doc/as.texinfo: Ditto.  Add CRIS gas manpage option overview.
 454         Include c-cris.texi.
 455         * doc/Makefile.am (CPU_DOCS): Add c-cris.texi
 456         * doc/Makefile.in: Regenerate.
 457
 458 2002-02-08  Chris Demetriou  <cgd@broadcom.com>
 459
 460         * config/tc-mips.c (IS_SEXT_32BIT_NUM): New macro to
 461         determine if a number is a sign-extended 32-bit number.
 462         (load_register): Use IS_SEXT_32BIT_NUM.
 463         (macro): Check if load/store macro handling is using a
 464         constant 32-bit address on 64-bit address systems, and if
 465         so optimize the generation of that address.
 466
 467 2002-02-08  Richard Henderson  <rth@redhat.com>
 468
 469         * config/tc-alpha.c (alpha_force_relocation): Don't assert that
 470         we've eliminated all foreign relocation types yet.
 471         (alpha_fix_adjustable): Likewise.
 472
 473 2002-02-08  Alexandre Oliva  <aoliva@redhat.com>
 474
 475         Contribute sh64-elf.
 476         2002-02-08  Alexandre Oliva  <aoliva@redhat.com>
 477                     Stephen Clarke <Stephen.Clarke@st.com>
 478         * doc/c-sh64.texi: Fix citation of SH64 architecture manual.
 479         2002-01-31  Alexandre Oliva  <aoliva@redhat.com>
 480         * config/tc-sh.c (md_relax_table): Added default sizes for
 481         non-PC-relative UNDEF_MOVI, and relaxation sequences for
 482         MOVI_16, MOVI_32 and MOVI_48.
 483         * config/tc-sh64.c (shmedia_md_apply_fix3): Fix warning.
 484         (shmedia_md_convert_frag): Handle non-PC-relative UNDEF_MOVI
 485         and MOVI_16.
 486         (shmedia_md_estimate_size_before_relax): Remove redundant
 487         blocks.  Set fragP->fr_var even if relaxation type unchanged.
 488         Retain UNDEF_MOVI until expression decays to number.
 489         2002-01-24  Alexandre Oliva  <aoliva@redhat.com>
 490         * config/tc-sh64.c (shmedia_init_reloc): Handle new SHmedia PIC
 491         relocation types.  Take fixP->fx_addnumber into account too.
 492         (shmedia_md_apply_fix): Likewise.
 493         (shmedia_md_convert_frag): Likewise.
 494         (shmedia_build_Mytes): Likewise.
 495         (sh64_consume_datalabel): Complain about nested datalabel.
 496         Support PIC relocs.  Call sh_parse_name.
 497         * config/tc-sh64.h (TC_RELOC_RTSYM_LOC_FIXUP): Extend definition
 498         in tc-sh.h to SHmedia reloc types.
 499         * config/tc-sh.c (SH64PCRELPLT, MOVI_PLT, MOVI_GOTOFF,
 500         MOVI_GOTPC): New relaxation constants.
 501         (md_relax_table): Introduce relaxation directives for PIC-related
 502         constants.
 503         (sh_PIC_related_p): Handle datalabel.
 504         (sh_check_fixup): Choose SH5 PIC relocations.
 505         (sh_cons_fix_new): Added BDF_RELOC_64.
 506         (md_apply_fix3, sh_parse_name): Handle GOTPLT.
 507         2002-01-18  Alexandre Oliva  <aoliva@redhat.com>
 508         * config/tc-sh64.c (sh64_max_mem_for_rs_align_code): If the
 509         current ISA is SHmedia, get 7 bytes.
 510         2001-11-28  Nick Clifton  <nickc@cambridge.redhat.com>
 511         * config/tc-sh.c (md_apply_fix3): Treat shmedia_md_apply_fix3 as a
 512         void function.
 513         * config/tc-sh64.c (shmedia_apply_fix): Rename to
 514         shmedia_apply_fix3 and make void.
 515         2001-05-17  Alexandre Oliva  <aoliva@redhat.com>
 516         * config/tc-sh64.c (s_sh64_abi): Remove unused arguments passed to
 517         as_bad.
 518         2001-04-12  Alexandre Oliva  <aoliva@redhat.com>
 519         * config/tc-sh64.h (md_parse_name): Take &c as argument.
 520         2001-03-14  DJ Delorie  <dj@redhat.com>
 521         * doc/Makefile.am (CPU_DOCS): Added c-sh64.texi
 522         * doc/Makefile.in(CPU_DOCS): Ditto.
 523         * doc/c-sh64.texi: New file.
 524         * doc/as.texinfo: Add SH64 support.
 525         2001-03-13  DJ Delorie  <dj@redhat.com>
 526         * config/tc-sh64.c (shmedia_get_operands): Rename A_RESV_Fx to
 527         A_REUSE_PREV so that its purpose is more obvious.
 528         (shmedia_build_Mytes): Ditto.
 529         2001-03-07  DJ Delorie  <dj@redhat.com>
 530         * config/tc-sh64.c (sh64_vtable_entry): New, strip datalabels
 531         before processing.
 532         (sh64_vtable_inherit): Ditto.
 533         (strip_datalabels): New, strip "datalabel" from given line.
 534         * config/tc-sh.c (md_pseudo_table): Add sh64-specific vtable
 535         pseudos.
 536         2001-03-06  Hans-Peter Nilsson  <hpn@cygnus.com>
 537         * config/tc-sh64.c (shmedia_md_assemble): Move dwarf2_emit_insn
 538         call ...
 539         (shmedia_build_Mytes): ... to here.
 540         2001-03-06  DJ Delorie  <dj@redhat.com>
 541         * config/tc-sh.c: Remove sh64-specific uaquad now that there
 542         is a generic one.
 543         2001-01-21  Hans-Peter Nilsson  <hpn@cygnus.com>
 544         * config/tc-sh64.h (DWARF2_LINE_MIN_INSN_LENGTH): Override.
 545         * config/tc-sh64.c (shmedia_md_assemble): Offset recorded insn
 546         address by one in call to dwarf2_emit_insn.
 547         2001-01-13  Hans-Peter Nilsson  <hpn@cygnus.com>
 548         Implement ".abi" pseudo and correct .cranges descriptors.  Correct
 549         alignment handling broken by imported changes.
 550         * config/tc-sh64.h (HANDLE_ALIGN): Override definition in tc-sh.h.
 551         (sh64_handle_align): Declare.
 552         (MAX_MEM_FOR_RS_ALIGN_CODE): Override definition in tc-sh.h.
 553         (sh64_max_mem_for_rs_align_code): Declare.
 554         (enum sh64_isa_values): Moved here from tc-sh64.c.
 555         (md_do_align): Define.
 556         (sh64_do_align): Declare.
 557         (struct sh64_tc_frag_data): New.
 558         (TC_FRAG_TYPE): Change to struct sh64_tc_frag_data.  Users
 559         changed.
 560         (TC_FRAG_INIT): Change to set new datatype.
 561         (struct sh64_segment_info_type): Rename member
 562         last_flushed_location to last_contents_mark.  All users changed.
 563         (md_elf_section_change_hook, TC_CONS_FIX_NEW): Do not define.
 564         (shmedia_elf_new_section, sh64_tc_cons_fix_new): Do not prototype.
 565         * config/tc-sh.c (md_pseudo_table): Add ".abi".
 566         (sh_elf_cons) [HAVE_SH64]: Call sh64_update_contents_mark instead
 567         of unsetting seen_insn.
 568         (md_assemble) [HAVE_SH64] <before new SHcompact sequence>: Also
 569         call sh64_update_contents_mark.
 570         (sh_handle_align): Remove HAVE_SH64-conditioned code.
 571         * config/tc-sh64.c (sh64_isa_mode): Correct type from boolean to
 572         enum sh64_isa_values.
 573         (sh64_set_contents_type): Drop segT parameter.  All callers changed.
 574         (emitting_crange): Boolean guard moved to file scope from function
 575         scope in sh64_set_contents_type.
 576         (s_sh64_abi): New.
 577         (sh64_update_contents_mark): New; most split out from
 578         sh64_flush_pending_output.
 579         (shmedia_md_end): Call sh64_update_contents_mark.  Set
 580         sh64_isa_mode to sh64_isa_sh5_guard unless sh64_isa_unspecified.
 581         (sh64_do_align): New function.
 582         (sh64_max_mem_for_rs_align_code): New function.
 583         (sh64_handle_align): Rename from shmedia_do_align.  Make
 584         non-static.  Add head comment.  Emit zero bytes for n bytes modulo
 585         four.  Change return-type to void.
 586         (shmedia_elf_new_section): Remove.
 587         (shmedia_md_assemble): Call sh64_update_contents_mark.
 588         (s_sh64_mode): Ditto.  Do not call md_flush_pending_output.  Make
 589         new frag.  Call sh64_update_contents_mark after making the new
 590         frag.
 591         (sh64_flush_pending_output): Just call sh64_update_contents_mark
 592         and sh_flush_pending_output.
 593         (sh64_flag_output): Also call md_flush_pending_output, but add
 594         condition on not emitting_crange.
 595         (sh64_tc_cons_fix_new): Remove.
 596         2001-01-12  Nick Clifton  <nickc@redhat.com>
 597         * config/tc-sh64.c (shmedia_do_align): Fix to work with new
 598         alignment handling scheme imported from sourceware.
 599         2001-01-12  Hans-Peter Nilsson  <hpn@cygnus.com>
 600         * config/tc-sh64.h (TARGET_FORMAT): Define.
 601         (sh64_target_format): Prototype.
 602         * config/tc-sh64.c (sh64_target_mach): New function.
 603         2001-01-07  Hans-Peter Nilsson  <hpn@cygnus.com>
 604         * config/tc-sh64.c (shmedia_md_end): When equating a symbol, use
 605         zero_address_frag instead of copying the frag of the symbol.
 606         (shmedia_frob_file_before_adjust): Ditto.
 607         (shmedia_md_apply_fix) <case BFD_RELOC_SH_IMM_MEDLOW16>: Cast mask
 608         to valueT to remove signedness.
 609         (shmedia_md_convert_frag): Add parameter final.  Rename parameter
 610         headers to output_bfd.  Do not evaluate symbols if final is false;
 611         do emit fixups.
 612         (shmedia_md_estimate_size_before_relax) <case C (MOVI_IMM_32,
 613         UNDEF_MOVI) et al>: If symbol cannot be modified to be PC-relative
 614         to the current frag, call shmedia_md_convert_frag to emit fixups
 615         and make frag_wane neutralize the frag.  Update comments.
 616         * config/tc-sh.c (md_convert_frag): Change caller of
 617         shmedia_md_convert_frag.
 618         2001-01-06  Hans-Peter Nilsson  <hpn@cygnus.com>
 619         * config/tc-sh64.h: Tweak comments and correct formatting.
 620         * config/tc-sh64.c: Ditto.
 621         (shmedia_md_convert_frag) <PT/PTA/PTB 32, 48 and 64 bit
 622         expansion, MOVI pcrel expansion>: Fix thinko calculating offset
 623         for the no-relocation case.
 624         (shmedia_check_limits): Fix range check being off-by-one for PTA.
 625         * config/tc-sh.c: Ditto.  Add proper comments to #ifdef/#ifndef
 626         wrappers.
 627         (SH64PCREL16_F): Increment for proper max-PTA handling.  Update
 628         comment.
 629         (SH64PCREL16_M, MOVI_16_M): Correct range thinko.
 630         (SH64PCREL48_M, MOVI_48_M): Similar; don't count in length of
 631         expansion.
 632         (SH64PCREL32_M, MOVI_32_M): Ditto; handle overflowing expression.
 633         Correct comment.
 634         2001-01-05  Hans-Peter Nilsson  <hpn@cygnus.com>
 635         * config/tc-sh64.c (shmedia_md_apply_fix) <second switch, case
 636         BFD_RELOC_SH_PT_16>: Set lowest bit in field to be relocated to 1.
 637         (shmedia_md_convert_frag) <case C (SH64PCREL16_32, SH64PCREL16) et
 638         al>: Set lowest bit of field to relocate to 1 and rest to empty,
 639         if reloc is emitted.
 640         2000-12-31  Hans-Peter Nilsson  <hpn@cygnus.com>
 641         New options plus bugfixes.
 642         * config/tc-sh.c (md_longopts): New options "-no-expand" and
 643         "-expand-pt32".
 644         (md_parse_option): Handle new options.
 645         (md_show_usage): Add blurb for new options.
 646         * config/tc-sh64.c (SHMEDIA_BFD_RELOC_PT): New macro.
 647         (sh64_expand, sh64_pt32): New variables.
 648         (shmedia_init_reloc): Handle BFD_RELOC_SH_PT_16.
 649         (shmedia_md_apply_fix): Hold original fixP->fx_r_type in
 650         orig_fx_r_type.  Change SHMEDIA_BFD_RELOC_PT into
 651         BFD_RELOC_SH_PT_16.  Handle BFD_RELOC_SH_PT_16 as pc-relative.
 652         <resolved previously-pc-relative relocs>: Handle
 653         SHMEDIA_BFD_RELOC_PT and BFD_RELOC_SH_PT_16.
 654         (shmedia_md_convert_frag) <case C (SH64PCREL16PT_64, SH64PCREL16),
 655         case C (SH64PCREL16PT_32, SH64PCREL16)>: Modify to PTB if operand
 656         points to SHcompact code.
 657         <case C (SH64PCREL16_32, SH64PCREL16), case C (SH64PCREL16_64,
 658         SH64PCREL16)>: Check that ISA of what operand points at and
 659         PTA/PTB matches, or emit error.
 660         (shmedia_check_limits): Handle BFD_RELOC_SH_PT_16 and
 661         SHMEDIA_BFD_RELOC_PT.
 662         (shmedia_immediate_op): If pcrel, emit fixup also for constant
 663         operand.
 664         (shmedia_build_Mytes) <case A_IMMS16>: Also check sh64_expand in
 665         condition for MOVI expansion.
 666         <case A_PCIMMS16BY4>: Handle expansion to 32 bits only, if
 667         sh64_pt32.  Emit only a BFD_RELOC_SH_PT_16 fixup if not
 668         sh64_expand.
 669         <case A_PCIMMS16BY4_PT>: Likewise, but emit a SHMEDIA_BFD_RELOC_PT
 670         fixup.
 671         (sh64_target_format): Error-check setting of sh64_pt32 and
 672         sh64_expand.  Fix typo in check for sh64_shcompact_const_crange.
 673         (shmedia_md_pcrel_from_section): Handle BFD_RELOC_SH_PT_16 and
 674         SHMEDIA_BFD_RELOC_PT as coming from SHmedia code.
 675         2000-12-31  Hans-Peter Nilsson  <hpn@cygnus.com>
 676         * config/tc-sh64.c: Improve comments.
 677         (shmedia_md_convert_frag): Remove inactive is_pt_variant code.  Do
 678         not say the linker will check correctness of PTA/PTB expansion.
 679         (shmedia_md_end): Make non-static.
 680         * config/tc-sh64.h (md_end): Define to shmedia_md_end.  Add
 681         prototype.
 682         * config/tc-sh.c (sh_finalize): Remove.
 683         * config/tc-sh.h (md_end): Do not define.
 684         Remove prototype for sh_finalize.
 685         2000-12-30  Hans-Peter Nilsson  <hpn@cygnus.com>
 686         * config/tc-sh64.c (shmedia_frob_section_type): Use a struct
 687         sh64_section_data container when storing section type in tdata
 688         field in elf_section_data.
 689         * config/tc-sh.c (sh_elf_final_processing): Change from EF_SH64 to
 690         EF_SH5.
 691         * Makefile.am: Update dependencies.
 692         * Makefile.in: Regenerate.
 693         2000-12-22  Hans-Peter Nilsson  <hpn@cygnus.com>
 694         * config/tc-sh64.c (shmedia_md_assemble): Don't protect
 695         dwarf2_emit_insn call with test on debug_type.
 696         2000-12-19  Hans-Peter Nilsson  <hpn@cygnus.com>
 697         * config/tc-sh64.c (sh64_set_contents_type): Make contents-type
 698         CRT_SH5_ISA32 sticky for 64-bit.
 699         2000-12-18  Hans-Peter Nilsson  <hpn@cygnus.com>
 700         Generate .crange sections when switching ISA mode or emitting
 701         constants in same section as code.
 702         * config/tc-sh64.c: Reformat structure definitions.
 703         (sh64_end_of_assembly, sh64_mix, sh64_shcompact_const_crange): New
 704         variables.
 705         (sh64_set_contents_type): Rename from sh64_init_section.  Rewrite
 706         to emit a .cranges descriptor when contents type changes.  Only
 707         emit error if changing contents type and -no-mix is in effect.
 708         (sh64_emit_crange, sh64_flush_last_crange, sh64_flag_output,
 709         sh64_flush_pending_output, sh64_tc_cons_fix_new): New functions.
 710         (shmedia_md_end): Set sh64_end_of_assembly.  Pass
 711         sh64_flush_last_crange over sections.
 712         When checking main symbol of datalabel symbol, check for
 713         STO_SH5_ISA32, not ISA type of section in definition.
 714         (shmedia_frob_file_before_adjust): Check main symbol for
 715         STO_SH5_ISA32; don't check ISA type of section in definition.
 716         (shmedia_frob_section_type): Adjust for .cranges; set section flag
 717         to SHF_SH5_ISA32_MIXED or SHF_SH5_ISA32 according to whether
 718         .cranges entries have been output.
 719         (shmedia_elf_new_section): Just call md_flush_pending_output.
 720         (shmedia_md_assemble): Do not emit a BFD_RELOC_SH_SHMEDIA_CODE
 721         fix.  Do not set tc_segment_info_data.in_code for section.  Call
 722         sh64_set_contents_type for SHmedia code.
 723         (s_sh64_mode): Do not call sh64_init_section or set seen_insn to
 724         false.  Call md_flush_pending_output.
 725         (sh64_target_format): Check that -no-mix and
 726         -shcompact-const-crange are used in sane combination with other
 727         options.
 728         (shmedia_md_pcrel_from_section): Check type of fix for how to
 729         adjust pc-relative.
 730         (sh64_consume_datalabel): Check symbol for having STO_SH5_ISA32,
 731         not ISA type of section in definition.
 732         * config/tc-sh64.h (struct sh64_segment_info_type): Rewrite to
 733         hold contents-type state.
 734         (md_flush_pending_output): Redefine to sh64_flush_pending_output.
 735         (sh64_flush_pending_output): Declare.
 736         (TC_CONS_FIX_NEW): Define to sh64_tc_cons_fix_new.
 737         (sh64_tc_cons_fix_new): Declare.
 738         * config/tc-sh.c (sh_elf_cons) [HAVE_SH64]: Unset seen_insn and
 739         call sh64_flag_output.
 740         (md_assemble) [HAVE_SH64]: Do not emit BFD_RELOC_SH_CODE.  Just
 741         call sh64_set_contents_type to mark SHcompact code and set
 742         seen_insn.
 743         (md_longopts): New options "-no-mix" and
 744         "-shcompact-const-crange".
 745         (md_parse_option): Handle new options.
 746         (md_show_usage): Add blurb for new options.
 747         (md_number_to_chars) [HAVE_SH64]: Call sh64_flag_output.
 748         2000-12-15  Hans-Peter Nilsson  <hpn@cygnus.com>
 749         * config/tc-sh64.c: Delete investigated and obsolete fixme:s.
 750         (sh64_last_insn_frag): New.
 751         (shmedia_md_convert_frag): Use tc_frag_data field of incoming frag
 752         to get frag for insn opcode for generating fixups; do not assume it
 753         is the same frag.
 754         (shmedia_build_Mytes): Set sh64_last_insn_frag after growing frag
 755         for new insn.
 756         * config/tc-sh64.h (ELF_TC_SPECIAL_SECTIONS): Define for .cranges
 757         section.
 758         (TC_FRAG_TYPE): Define as fragS *.
 759         (TC_FRAG_INIT): Define to set tc_frag_data to sh64_last_insn_frag.
 760         (sh64_last_insn_frag): Declare.
 761         (sh64_consume_datalabel): Fix typo; check for seginfo != NULL,
 762         not == NULL before dereferencing.
 763         2000-12-12  Hans-Peter Nilsson  <hpn@cygnus.com>
 764         Get rid of BFD section flag and EF_SH64_ABI64.
 765         * config/tc-sh64.c (shmedia_frob_section_type): Use
 766         elf_section_data (sec)->tdata, not a specific BFD section flag, to
 767         communicate the section as containing SHmedia code.  Describe why.
 768         * config/tc-sh.c (sh_elf_final_processing): Tweak comment.  Set
 769         EF_SH64 regardless of ABI.
 770         * config/tc-sh64.c (shmedia_md_apply_fix): Decapitalize "invalid"
 771         in error message.  Handle resolved expressions for
 772         BFD_RELOC_SH_IMMS10, BFD_RELOC_SH_IMMS10BY2,
 773         BFD_RELOC_SH_IMMS10BY4 and BFD_RELOC_64.
 774         (shmedia_check_limits): Handle BFD_RELOC_64.
 775         (sh64_adjust_symtab): Do not decrement the GAS symbol value for
 776         a STO_SH5_ISA32 symbol, only the BFD value.
 777         2000-12-11  Ben Elliston  <bje@redhat.com>
 778         * config/tc-sh64.c: Call dwarf2_emit_insn, not the defunct
 779         dwarf2_generate_asm_lineno.
 780         2000-12-11  Hans-Peter Nilsson  <hpn@cygnus.com>
 781         Handle PC-relative MOVI expansions with assembler relaxation.
 782         Generate PC-relative relocs from 16-bit PC-relative expressions.
 783         * config/tc-sh64.c (SHMEDIA_MD_PCREL_FROM_FIX): Break out from...
 784         (shmedia_md_pcrel_from_section): ...here.
 785         (shmedia_md_apply_fix): Handle fixups for 16-bit operands that has
 786         turned completely resolved.  Adjust relocation type for 16-bit
 787         immediate operands that has turned PC-relative.  Adjust back for
 788         MD_PCREL_FROM_SECTION being applied twice.
 789         (shmedia_md_convert_frag): Always emit reloc for expression with
 790         global or weak symbol.  Handle relaxation result for PC-relative
 791         expressions.
 792         (shmedia_md_estimate_size_before_relax): An expression with a weak
 793         or global symbol can not be relaxed.  Break out tests for
 794         relaxable symbol into variable sym_relaxable.
 795         <cases C (MOVI_IMM_64, UNDEF_MOVI) and C (MOVI_IMM_32,
 796         UNDEF_MOVI)>: Break out any PC-relative expression and change
 797         relaxation type.
 798         (shmedia_build_Mytes): CSE &operands->operands[j] into variable
 799         opjp.
 800         <case A_IMMS16>: Fix typo for initial minor relaxation type of
 801         MOVI expansion.  If X_op_symbol of the immediate expression is
 802         set, make an expression symbol for the argument to frag_var.
 803         * config/tc-sh.c (MOVI_IMM_32_PCREL, MOVI_IMM_64_PCREL): New
 804         relaxations.
 805         (END): Adjust for new relaxations.
 806         (md_relax_table): Add entries for new relaxations.
 807         2000-12-07  Ben Elliston  <bje@redhat.com>
 808         * config/tc-sh64.c (shmedia_parse_reg): Initialize variable len.
 809         2000-12-07  Hans-Peter Nilsson  <hpn@cygnus.com>
 810         * config/tc-sh64.c (shmedia_md_convert_frag): Correct all MOVI and
 811         SHORI operand offsets in PT/PTA/PTB expansions.
 812         2000-12-05  Hans-Peter Nilsson  <hpn@cygnus.com>
 813         Implement DataLabel semantics.
 814         * config/tc-sh.c (sh_frob_file) [HAVE_SH64]: Call
 815         shmedia_frob_file_before_adjust.
 816         * config/tc-sh64.c [! OBJ_ELF]: Emit #error.
 817         (DATALABEL_SUFFIX): Define.
 818         (shmedia_md_end) <before adjusting STO_SH5_ISA32 symbols>: Walk
 819         symbol list to update "datalabel" symbols to their main symbol
 820         counterparts.
 821         (shmedia_frob_file_before_adjust): New.
 822         (sh64_adjust_symtab): For remaining datalabel symbols, set to
 823         undefined and set STT_DATALABEL.
 824         (sh64_frob_label): Initialize TC symbol field.
 825         (sh64_consume_datalabel): Actually implement semantics.  New
 826         parameter operandf, call it instead of expression.
 827         (sh64_exclude_symbol): New.
 828         * config/tc-sh64.h (md_parse_name): Pass on the function operand
 829         to sh64_consume_datalabel.
 830         (tc_symbol_new_hook): Define to tc_frob_symbol.
 831         (TC_SYMFIELD_TYPE): Define to symbolS *.
 832         (tc_frob_symbol): Define to call sh64_exclude_symbol.
 833         2000-12-01  Hans-Peter Nilsson  <hpn@cygnus.com>
 834         * config/tc-sh64.c (shmedia_init_reloc): Tweak comment for default
 835         case.
 836         (shmedia_md_assemble): Call dwarf2_generate_asm_lineno if
 837         generating dwarf2 debug information.
 838         2000-11-30  Hans-Peter Nilsson  <hpn@cygnus.com>
 839         * config/tc-sh64.c (sh64_target_format): Use elf64-sh64l and
 840         elf64-sh64 for the 64-bit ABI.
 841         * config/tc-sh.c (md_show_usage): Tweak usage output for -abi=*
 842         option.
 843         2000-11-29  Hans-Peter Nilsson  <hpn@cygnus.com>
 844         * config/tc-sh.c: Remove conditionalizing on HAVE_SH64 for
 845         case-insensitivity.
 846         2000-11-27  Hans-Peter Nilsson  <hpn@cygnus.com>
 847         * config/tc-sh64.c: Tweak comments, formatting and error messages.
 848         (enum sh64_abi_values): New type.
 849         (enum sh64_isa_values): New type.
 850         (sh64_isa_mode): Replace shmedia_mode.  All referers changed.
 851         (seen_shcompact_mode, seen_shmedia_mode): Delete.
 852         (sh64_abi): Replace shmedia_64.
 853         (shmedia_md_convert_frag) <C (MOVI_IMM_64, MOVI_64),
 854         C (MOVI_IMM_32, MOVI_32)>: Correct register number handling.
 855         (s_sh64_mode): Check validity for this target.
 856         (sh64_target_format): Initialize defaults for ISA and ABI.
 857         Fallback to old object format if no SH64 ISA or ABI has been
 858         specified.
 859         * config/tc-sh.c (md_parse_option): Check combinations for errors.
 860         (sh_elf_final_processing): Change to have EF_SH64_ABI64 for 64-bit
 861         ABI and EF_SH64 for 32-bit ABI, if SH64 options are specified.
 862         * config/tc-sh64.h: Fix typo in comment.
 863         2000-11-25  Hans-Peter Nilsson  <hpn@cygnus.com>
 864         * config/tc-sh64.c (shmedia_md_estimate_size_before_relax)
 865         <PT fixups for absolute values>: Size will be longest, not
 866         shortest.
 867         (shmedia_md_convert_frag): Disable PTB-warning machinery.  Correct
 868         all MOVI and SHORI operand offsets in PT/PTA/PTB expansions.
 869         * config/tc-sh.c (parse_reg) [HAVE_SH64]: Add local variables l0
 870         and l1 to hold lowercase of two first characters.  Change all
 871         remaining TO_LOWER to tolower.
 872         * config/tc-sh64.c (TO_LOWER): Delete.
 873         (shmedia_find_cooked_opcode): Use tolower, not TO_LOWER.
 874         (md_parse_name): Define.
 875         (sh64_consume_datalabel): Declare.
 876         (DOLLAR_DOT): Define.
 877         * config/tc-sh64.c (shmedia_parse_exp): New.
 878         (sh64_consume_datalabel): New; just ignoring datalabel semantics.
 879         (shmedia_parse_reg): Remove const from src
 880         parameter.
 881         (shmedia_get_operands): Ditto for args parameter and ptr variable.
 882         (shmedia_md_assemble): Ditto for op_end variable.
 883         (shmedia_get_operand): Ditto for ptr parameter and src variable.
 884         Use shmedia_parse_exp, not parse_exp.
 885         * config/tc-sh64.c (shmedia_parse_reg): Add shmedia_arg_type
 886         parameter.  All callers changed.
 887         (shmedia_get_operand): Add shmedia_arg_type parameter.  All
 888         callers changed.
 889         (shmedia_parse_reg): Put first two character in local variables.
 890         Use tolower, not TO_LOWER.  If no register is found and argtype
 891         indicates a control register, scan shmedia_creg_table
 892         case-insensitive.
 893         2000-11-24  Hans-Peter Nilsson  <hpn@cygnus.com>
 894         * Makefile.am (CPU_TYPES): Add sh64.
 895         (TARGET_CPU_CFILES): Add config/tc-sh64.c.
 896         (TARGET_CPU_HFILES): Add config/tc-sh64.h.
 897         Regenerate dependencies.
 898         * Makefile.in: Regenerate.
 899         * configure.in: Add support for sh64-*-elf*.
 900         * configure: Regenerate.
 901         * config/tc-sh64.h: New.
 902         * config/tc-sh64.c: New.
 903         * config/tc-sh.c (md_pseudo_table) [HAVE_SH64]: New pseudos
 904         .mode, .isa and .uaquad.
 905         [HAVE_SH64] (SH64PCREL16_32, SH64PCREL16_64, SH64PCREL16PT_32,
 906         SH64PCREL16PT_64, MOVI_IMM_32, MOVI_IMM_64): Define.
 907         [HAVE_SH64] (END): Define as 10.
 908         [HAVE_SH64] (UNDEF_SH64PCREL, SH64PCREL16, SH64PCREL32,
 909         SH64PCREL48, SH64PCREL64, UNDEF_MOVI, MOVI_16, MOVI_32, MOVI_48,
 910         MOVI_64): Define.
 911         [HAVE_SH64] (SH64PCREL16_F, SH64PCREL16_M, SH64PCREL16_LENGTH,
 912         SH64PCREL32_F, SH64PCREL32_M, SH64PCREL32_LENGTH, SH64PCREL48_F,
 913         SH64PCREL48_M, SH64PCREL48_LENGTH, SH64PCREL64_LENGTH,
 914         MOVI_16_LENGTH, MOVI_32_LENGTH, MOVI_48_LENGTH, MOVI_64_LENGTH):
 915         Define.
 916         (md_relax_table) [HAVE_SH64]: Provide relaxations for SHmedia.
 917         (md_begin) [HAVE_SH64]: Call shmedia_md_begin.
 918         (parse_reg) [HAVE_SH64]: Parse register names case-insensitive.
 919         (md_assemble) [HAVE_SH64]: Call shmedia_md_assemble if assembling
 920         SHmedia instructions.  Handle state-change after switching to
 921         SHcompact.
 922         (md_longopts) [HAVE_SH64]: New options --isa=* and --abi=*.
 923         (md_parse_option) [HAVE_SH64]: Parse new options.
 924         (md_show_usage) [HAVE_SH64]: Show usage of new options.
 925         (md_convert_frag) [HAVE_SH64] <default>: Call
 926         shmedia_md_convert_frag instead of abort.
 927         (sh_force_relocation) [HAVE_SH64]: Also force relocation for
 928         BFD_RELOC_SH_SHMEDIA_CODE.
 929         (sh_elf_final_processing) [HAVE_SH64]: Set flags identifying
 930         SHcompact or SHmedia code.
 931         (md_apply_fix) [HAVE_SH64] <default>: Return result from calling
 932         shmedia_md_apply_fix instead of abort.
 933         (md_estimate_size_before_relax) [HAVE_SH64] <default>: Return
 934         result from calling shmedia_md_estimate_size_before_relax instead
 935         of calling abort.
 936         (sh_do_align) [HAVE_SH64]: If shmedia_mode, let shmedia_do_align
 937         do the work.
 938         (tc_gen_reloc) [HAVE_SH64]: For unrecognized relocs, call
 939         shmedia_init_reloc and do nothing more if it returns non-zero.
 940         (sh_finalize) [HAVE_SH64]: Call shmedia_md_end.
 941         * po/POTFILES.in: Regenerate.
 942         * po/gas.pot: Regenerate.
 943
 944 2002-02-06  Alexandre Oliva  <aoliva@redhat.com>
 945
 946         * config/tc-sh.c (parse_at): Install the correct version of
 947         2002-02-04's patch.
 948
 949         * config/tc-sh.c (md_apply_fix3) <BFD_RELOC_32_PLT_PCREL>: Don't
 950         assume fixP->fx_subsy is non-NULL.
 951
 952 2002-02-04  Alexandre Oliva  <aoliva@redhat.com>
 953
 954         * config/tc-sh.c (parse_at): Set arg type of @(expr,pc) to
 955         A_DISP_PC_ABS, and adjust it by -4.
 956         (get_specific): Accept A_DISP_PC_ABS where A_DISP_PC is
 957         expected.
 958         (build_Mytes): Mark PCRELIMM fix-ups as pc-relative only if
 959         the operand type is not A_DISP_PC_ABS.
 960
 961 2002-02-04  Hans-Peter Nilsson  <hp@bitrange.com>
 962
 963         * config/tc-mmix.c (tc_gen_reloc): Don't try and take the value of
 964         common and weak symbols.  Handle common and weak symbols as
 965         undefined symbols with regards to GREG handling and merging.
 966         (mmix_frob_file): Ditto.
 967
 968 2002-02-02  Jason Thorpe  <thorpej@wasabisystems.com>
 969
 970         * configure.in (hppa-*-netbsd*): New target.
 971         * configure: Regenerate.
 972         * config/tc-hppa.h: Also define WARN_COMMENTS if TE_NetBSD.
 973
 974 2002-02-02  Alan Modra  <amodra@bigpond.net.au>
 975
 976         * config/tc-v850.c: Add missing prototypes amd use old-style
 977         function definitions.
 978         (AREA_ZDA, AREA_SDA, AREA_TDA): Delete.
 979         (sdata_section tdata_section, zdata_section, sbss_section,
 980         tbss_section, zbss_section, rosdata_section, rozdata_section,
 981         scommon_section, tcommon_section, zcommon_section,
 982         call_table_data_section, call_table_text_section): Delete.
 983         (v850_sdata, v850_tdata, v850_zdata, v850_sbss, v850_tbss,
 984         v850_zbss, v850_bss, v850_rosdata, v850_rozdata,
 985         v850_call_table_data, v850_call_table_text): Delete.
 986         (struct v850_seg_entry): New.
 987         (v850_seg_table): New.
 988         (SDATA_SECTION TDATA_SECTION, ZDATA_SECTION, SBSS_SECTION,
 989         TBSS_SECTION, ZBSS_SECTION, BSS_SECTION, ROSDATA_SECTION,
 990         ROZDATA_SECTION, SCOMMON_SECTION, TCOMMON_SECTION, ZCOMMON_SECTION,
 991         CALL_TABLE_DATA_SECTION, CALL_TABLE_TEXT_SECTION): Define.
 992         (do_v850_seg): New.
 993         (v850_seg): New.
 994         (v850_comm): Use do_v850_seg and v850_seg_table.  Simplify
 995         recording of alignment.
 996         (md_pseudo_table): Use v850_seg.
 997         (md_begin): Don't init .call_table_data and .call_table_text here.
 998         Set v850_seg_table bss entry.
 999
1000 2002-02-01  Hans-Peter Nilsson  <hp@bitrange.com>
1001
1002         Support on-demand global register allocation by passing on
1003         base-plus-offset relocs to the linker.
1004         * config/tc-mmix.c: Tweak and fix typos in comments.
1005         (allocate_undefined_gregs_in_linker): New variable.
1006         (OPTION_LINKER_ALLOCATED_GREGS): New option macro.
1007         (md_longopts): Add --linker-allocated-gregs.
1008         (md_parse_option) <case 'x'>: Imply --linker-allocated-gregs.
1009         <case OPTION_LINKER_ALLOCATED_GREGS>: New.
1010         (md_show_usage): Update text for -x.  Add text for
1011         --linker-allocated-gregs.
1012         (tc_gen_reloc): Derive default value for addend from val and
1013         baddsy.  Use addsec and bfd_is_abs_section in more places.  Don't
1014         emit error for BFD_RELOC_MMIX_BASE_PLUS_OFFSET without suitable
1015         GREG if allocate_undefined_gregs_in_linker.
1016         * doc/as.texinfo (Overview) <Target MMIX options>: Add
1017         --linker-allocated-gregs.
1018         * doc/c-mmix.texi (MMIX-Opts): Add blurb about
1019         --linker-allocated-gregs.  Mention that it's implied by -x.
1020         (MMIX-Pseudos) <GREG>: Mention when and how a GREG can be omitted.
1021         (MMIX-mmixal): Clarify dated comparison and location of MMIXware.
1022
1023         * config/tc-mmix.h (md_parse_name): Use ISUPPER, not isupper.
1024
1025 2002-02-01  Alan Modra  <amodra@bigpond.net.au>
1026
1027         * Makefile.am: Run "make dep-am"
1028         * Makefile.in: Regenerate.
1029
1030 2002-01-31  Ivan Guzvinec  <ivang@opencores.org>
1031
1032         * config/tc-or32.c: New file.
1033         * config/tc-or32.h: New file.
1034         * configure.in: Add support for or32 targets.
1035         * configure: Regenerate.
1036         * config/obj-coff.c: Add support for or32 targets.
1037         * config/obj-coff.h: Add support for or32 targets.
1038         * Makefile.am: Add support for or32 targets.
1039         * Makefile.in: Regenerate.
1040         * NEWS: Mention support for OpenRISC.
1041         * doc/Makefile.in: Regenerate.
1042         * po/POTFILES.in: Regenerate.
1043         * po/gas.pot: Regenerate.
1044
1045 2002-01-30  Richard Sandiford  <rsandifo@redhat.com>
1046
1047         * config/tc-sh.c (parse_reg): Fix end-of-word check for is, ix, iy
1048         and mod.
1049
1050 2002-01-29  Chris Demetriou  <cgd@broadcom.com>
1051
1052         * config/tc-mips.c (tc_gen_reloc): Arrange for
1053         BFD_RELOC_PCREL_HI16_S relocations to be output relative to
1054         their LO16 parts, even for ELF.
1055
1056 2002-01-29  Daniel Jacobowitz  <drow@mvista.com>
1057
1058         * config/tc-i386.c: Protect definitions of true and false
1059         from redefinition.
1060
1061 2002-01-28  Jakub Jelinek  <jakub@redhat.com>
1062
1063         * config/obj-elf.c (elf_frob_file_before_adjust): Remove symbols
1064         made because of .weak, if they are neither defined nor used in any
1065         way.
1066
1067 2002-01-27  Daniel Jacobowitz  <drow@mvista.com>
1068
1069         * configure: Regenerated.
1070
1071 2002-01-26  Hans-Peter Nilsson  <hp@bitrange.com>
1072
1073         * doc/Makefile.am (install): Depend on install-info.
1074         * doc/Makefile.in: Regenerate.
1075
1076 2002-01-26  Nick Clifton <nick@redhat.com>
1077
1078         * po/fr.po: Updated version
1079
1080 2002-01-24  Kazu Hirata  <kazu@hxi.com>
1081
1082         * config/tc-h8300.c (check_operand): Don't print a warning
1083         when a valid 24-bit address is given to a 16-bit address
1084         operand.
1085
1086 2002-01-24  Alexandre Oliva  <aoliva@redhat.com>
1087
1088         * config/tc-sh.c (sh_elf_suffix): Removed.
1089         (sh_PIC_related_p, sh_check_fixup, sh_cons_fix_new,
1090         sh_end_of_match, sh_parse_name): New functions.
1091         (sh_elf_cons): Simplify.
1092         (parse_exp): Reject misplaced PIC operands.
1093         (md_undefined_symbol): Simplify.
1094         (sh_fix_adjustable): Let @GOTOFF be adjusted.
1095         (md_apply_fix3): Write @PLT and @GOTOFF addends in place.
1096         (tc_gen_reloc): Move fixp subsy absolute value into addnumber.
1097         Complain if subsy remains at the end.
1098         * config/tc-sh.h (sh_parse_name, sh_cons_fix_new): Declare.
1099         (md_parse_name, TC_CONS_FIX_NEW, O_PIC_reloc): Define.
1100
1101 2002-01-22  Alexandre Oliva  <aoliva@redhat.com>
1102
1103         * config/tc-mn10300.c (xr_registers): Move `pc'...
1104         (other_registers): ... here.
1105
1106 2002-01-22  Alan Modra  <amodra@bigpond.net.au>
1107
1108         * Makefile.am: Run "make dep-am".
1109         * Makefile.in: Regenerate.
1110         * gas/po/POTFILES.in: Regenerate.
1111
1112 2002-01-21  DJ Delorie  <dj@redhat.com>
1113
1114         * config/obj-coff.c (obj_coff_init_stab_section): Make the
1115         stabstr_name allocation permanent, as it will be referenced from
1116         the section hash.
1117
1118 2002-01-21  Jason Thorpe  <thorpej@wasabisystems.com>
1119
1120         * configure.in (ia64-*-netbsd*): New target.
1121         * configure: Regenerate.
1122
1123 2002-01-21  Hans-Peter Nilsson  <hp@bitrange.com>
1124
1125         * doc/as.texinfo (Overview) <Target ARM options>: Add missing {}
1126         to @dots call.
1127         <Detailed description, ARM options>: Ditto.
1128         * doc/c-arm.texi (ARM Options): Ditto.
1129
1130 2002-01-18  Richard Earnshaw  <rearnsha@arm.com>
1131
1132         * tc-arm.c (do_xsc_mia, do_xsc_mar, do_xsc_mra): Renamed from
1133         do_mia, do_mar and do_mra respectively.
1134         (do_mav_*): Renamed from do_c_*.
1135         (mav_reg_required_here, mav_parse_offset): Renamed from
1136         cirrus_reg_required_here and cirrus_parse_offset respectively.
1137         (MAV_MODE?): Renamed from CIRRUS_MODE?.
1138
1139 2002-01-18  Richard Earnshaw  <rearnsha@arm.com>
1140             Keith Walker  <keith.walker@arm.com>
1141
1142         * tc-arm.c (ARM_EXT_V5J, ARM_ARCH_V5TEJ): Define.
1143         (insns): Add pattern for bxj instruction.
1144         (do_bxj): New function.
1145         (arm_cpus): Add arm926ej.
1146         (arm_archs): Add armv5tej.
1147
1148 2002-01-18  Richard Earnshaw  <rearnsha@arm.com>
1149
1150         * doc/c-arm.texi: Add new fpe options to list of supported flags.
1151
1152 2002-01-19  Keith Walker  <keith.walker@arm.com>
1153
1154         * tc-arm.c (arm_fpus): Add fpe2 and fpe3.
1155
1156 2002-01-18  Richard Earnshaw  <rearnsha@arm.com>
1157
1158         * NEWS: Mention new ARM command-line options and VFP support.
1159
1160         * config/tc-arm.c (ARM_CEXT_XSCALE): Replaces ARM_EXT_XSCALE.  All
1161         uses changed.
1162         (ARM_CEXT_MAVERICK): Similarly.
1163         (ARM_ANY): Now means any core instruction.
1164         (CPU_DEFAULT): Default to ARM_ANY.
1165         (uses_apcs_26, atcps, support_interwork, uses_apcs_float)
1166         (pic_code): Declare for all object types.  Make type int.
1167         (legacy_cpu, legacy_fpu, mcpu_cpu_opt, mcpu_fpu_opt, march_cpu_opt)
1168         (march_fpu_opt, mfpu_opt): Declare.
1169         (md_longopts): Tidy up conditional definitions.
1170         (arm_opts, arm_cpus, arm_archs, arm_fpus, arm_extensions)
1171         (arm_long_opts): New tables.
1172         (arm_parse_cpu, arm_parse_arch, arm_parse_fpu): New functions.
1173         (arm_parse_extension): New function.
1174         (md_parse_option): Rewrite using new table-driven system.
1175         (md_show_usage): Use new table-driven system.
1176         (md_begin): Calculate cpu_variant from command line option data.
1177         * doc/as.texinfo (ARM ISA options): Docuement new ARM-specific
1178         command-line options.
1179         * doc/c-arm.texi: Likewise.
1180
1181 2002-01-18  Andreas Jaeger  <aj@suse.de>
1182
1183         * as.c (parse_args): Update year.
1184
1185 2002-01-17  Timothy Wall  <twall@alum.mit.edu>
1186
1187         * config/tc-tic54x.c (encode_address): Add a more informative
1188         warning about incorrect syntax.
1189
1190 2002-01-17  Nick Clifton  <nickc@cambridge.redhat.com>
1191
1192         * po/gas.pot: Regenerate.
1193
1194 2002-01-17  Nick Clifton  <nickc@cambridge.redhat.com>
1195
1196         * macro.c (get_any_string): Add no-c-format comment to prevent
1197         confusion when translating string.
1198         * gasp.c (get_any_string): Add no-c-format comment to prevent
1199         confusion when translating string.
1200
1201 2002-01-16  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
1202             Johannes Stezenbach <js@convergence.de>
1203         * config/tc-mips.c (percent_op): Ensure longer percent_op's are
1204         matched before the shorter ones.
1205         (my_getSmallParser): Fix handling of nested parentheses in
1206         percent_op's. Code cleanup.
1207         (my_getPercentOp): New function, code from my_getSmallParser.
1208         (my_getSmallExpression): Fix handling of closing parentheses.
1209         Code cleanup. Better comments.
1210
1211 2002-01-16  Nick Clifton <nickc@redhat.com>
1212
1213         po/tr.po: New file: Turkish translation.
1214         configure.in (LINGUAS): Add "tr".
1215         configure: Regenerate.
1216
1217 2002-01-15  Richard Earnshaw  <rearnsha@arm.com>
1218
1219         Support for VFP instructions
1220         * tc-arm.c (CP_WB_OK, CP_NO_WB): New defines.
1221         (cp_address_required_here): New argument wb_ok.  When false, do not
1222         accept write-back forms of addressing.  Change all callers.
1223         (FPU_VFP_EXT_NONE, FPU_VFP_EXT_V1xD, FPU_VFP_VFP_V1)
1224         (FPU_VFP_EXT_V2): Define.
1225         (FPU_ARCH_VFP, FPU_ARCH_VFP_V1xD, FPU_ARCH_VFP_V1, FPU_ARCH_VFP_V2):
1226         Define in terms of above.
1227         (vfp_dp_reg_pos, vfp_sp_reg_pos, vfp_ldstm_type): New enums.
1228         (vfp_reg): New struct.
1229         (vfp_regs): New array of registers.
1230         (insns): Add VFP instructions.
1231         (sn_table): New array of VFP single-precision register names.
1232         (dn_table): New array of VFP double-precision register names.
1233         (all_reg_maps): Add the new register tables.
1234         (arm_reg_type): Add new values for above.  Increase RET_TYPE_MAX.
1235         (vfp_sp_reg_required_here, vfp_dp_reg_required_here, do_vfp_sp_monadic)
1236         (do_vfp_dp_monadic, do_vfp_sp_dyadic, do_vfp_dp_dyadic)
1237         (do_vfp_reg_from_sp, do_vfp_sp_reg2, do_vfp_sp_from_reg)
1238         (do_vfp_reg_from_dp, do_vfp_reg2_from_dp, do_vfp_dp_from_reg)
1239         (do_vfp_dp_from_reg2, vfp_psr_parse, vfp_psr_required_here)
1240         (do_vfp_reg_from_ctrl, do_vfp_ctrl_from_reg, do_vfp_sp_ldst)
1241         (do_vfp_dp_ldst, vfp_sp_reg_list, vfp_dp_reg_list, vfp_sp_ldstm)
1242         (vfp_dp_ldstm, do_vfp_sp_ldstmia, do_vfp_sp_ldstmdb, do_vfp_ldstmia)
1243         (do_vfp_dp_ldstmdb, do_vfp_xp_ldstmia, do_vfp_xp_ldstmdb)
1244         (do_vfp_sp_compare_z, do_vfp_dp_compare_z, do_vfp_dp_sp_cvt)
1245         (do_vfp_sp_dp_cvt): New functions.
1246         (md_begin): Set soft-float flag for appropriate VFP work.
1247         (md_atof): Handle VFP-format doubles.
1248         (md_parse_option): Handle VFP command-line options.
1249         (md_show_usage): Display VFP command-line options.
1250
1251 2002-01-15  Richard Earnshaw  <rearnsha@arm.com>
1252
1253         * tc-arm.c (md_parse_option): Tidy up setting of cpu_variant for
1254         various command line options.
1255
1256 2002-01-15  Nick Clifton  <nickc@cambridge.redhat.com>
1257
1258         * config/tc-xstormy16.c: (xstormy16_fix_adjustable): Do not fix
1259         vtinherit relocs.
1260         (xstormy16_md_apply_fix3): Do not return a value.
1261
1262 2002-01-14  Richard Earnshaw  <rearnsha@arm.com>
1263
1264         * tc-arm.c (md_longopts): On targets that aren't bi-endian, support
1265         the -EL/-EB option that matches the target's endianness.
1266         (md_parse_option): Likewise.
1267
1268 2002-01-14  Richard Earnshaw  <rearnsha@arm.com>
1269
1270         * tc-arm.c (md_longopts): Fix misplaced #endif -- the -oabi option
1271         is not dependent on ARM_BI_ENDIAN.
1272
1273 2002-01-14  Richard Earnshaw  <rearnsha@arm.com>
1274
1275         * tc-arm.c (all error messages): Normalize capitalization of messages.
1276
1277         * tc-arm.h (md_operand): Delete define.
1278         * tc-arm.c (in_my_get_expression): New static variable.
1279         (my_get_expression): Set and clear it.
1280         (md_operand): New function.  If called from my_get_expression
1281         put the error in inst.error.
1282         (output_inst): Now takes argument of instruction being assembled.
1283         Print it out with any error message.
1284         (do_ldst, do_ldstv4, thumb_load_store): Fault attempt to use a store
1285         with '=' syntax.
1286         (end_of_line): Don't update inst.error if it is already set.
1287
1288 2002-01-11  Richard Earnshaw  <rearnsha@arm.com>
1289
1290         * tc-arm.c ((do_ldst): Fix handling an immediate expression pseudo
1291         op that can be translated into a mvn instruction.
1292
1293 2002-01-11  Steve Ellcey  <sje@cup.hp.com>
1294
1295         * gas/config/tc-ia64.h (MD_FLAGS_DEFAULT): New Macro for
1296         setting default md.flags.
1297         (SHT_INIT_ARRAY): New elf special section used by HP-UX.
1298         (SHT_FINI_ARRAY): New elf special section used by HP-UX.
1299         * gas/config/tc-ia64.c (setup_unwind_header): Add support
1300         for 32 bit unwind info blocks.
1301         (generate_unwind_image): Add support for different types
1302         of unwind images (32 bits and/or big-endian).
1303         (ia64_init): Use MD_FLAGS_DEFAULT to set md.flags.
1304         (ia64_target_format): Add support for hpux target formats.
1305         (ia64_gen_real_reloc_type): Add support for FUNC_IPLT_RELOC.
1306         (ia64_elf_section_type): Add support for SHT_INIT_ARRAY and
1307         SHT_FINI_ARRAY elf section types.
1308
1309 2002-01-10  Richard Earnshaw  <rearnsha@arm.com>
1310
1311         * tc-arm.c (struct reg_entry): Move before prototypes.
1312         (int_register, cp_register, fp_register): Delete.
1313         (reg_table): Delete.  Replaced with ...
1314         (rn_table, cp_table, cn_table, fn_table, mav_mvf_table)
1315         (mav_mvd_table, mav_mvfx_table, mav_mvdx_table, mav_mvax_table)
1316         (mav_dspsc_table): ... one table per register set.
1317         (arm_reg_hsh): Delete.
1318         (struct reg_map): New structure.
1319         (all_reg_maps): New array.
1320         (enum arm_reg_type): New enums.
1321         (build_reg_hsh): New function.
1322         (insert_reg_alias): Use hash table passed by caller.  Adjust all
1323         callers.
1324         (create_register_alias): New function, split out from ...
1325         (md_assemble): ... here.
1326         (md_begin): Build new register hash tables.
1327         (arm_reg_parse): New argument for the hash table to search.  Adjust all
1328         callers.
1329         (arm_reg_parse_any): New function.
1330         (co_proc_number): Look up the processor number in the processor hash
1331         table.
1332         (cirrus_regtype): Delete.
1333         (cirrus_register, cirrus_mvf_register, cirrus_mvd_register)
1334         (cirrus_mvfx_register, cirrus_mvdx_register, cirrus_mvax_register)
1335         (ARM_EXT_MAVERICKsc_register): Delete.
1336         (do_c_binops_1, do_c_binops_2, do_c_binops_3): Delete.
1337         (do_c_binops_1[a-o], do_c_binops_2[a-c], do_c_binops_3[a-d]): New
1338         functions.
1339         (do_c_triple_4, do_c_triple_5): Delete.
1340         (do_c_triple_4[ab], do_c_triple_5[a-h]): New functions.
1341         (do_c_quad_6): Delete.
1342         (do_c_quad_6[ab]): New functions.
1343         (do_c_binops, do_c_triple, do_c_quad, do_c_shift, do_c_ldst): Rework
1344         arguments to use new register parsing methods.
1345         (cirrus_reg_required_here): Likewise.
1346         (insns): Reclassify cirrus maverick worker functions.
1347         (cirrus_valid_reg): Delete.
1348
1349 2002-01-07  Jason Thorpe  <thorpej@wasabisystems.com>
1350
1351         * configure.in (sh*le): Set cpu_type=sh and endian=little.
1352         (sh*-*-netbsdelf*): New target.
1353         * configure: Regenerate.
1354         * tc-sh.h: Update copyright years.
1355         (TARGET_FORMAT): Add version for TE_NetBSD.
1356
1357 2002-01-07  Nick Clifton  <nickc@cambridge.redhat.com>
1358
1359         * read.c (emit_expr): Do not allow 'size' or 'nbytes' to go
1360         negative.
1361
1362 2002-01-06  Alan Modra  <amodra@bigpond.net.au>
1363
1364         * config/tc-m68k.h (md_prepare_relax_scan): Rewrite.
1365         * config/tc-m68k.c (md_relax_table): Add md_prepare_relax_scan comment.
1366
1367 2002-01-05  Daniel Jacobowitz  <drow@mvista.com>
1368
1369         * tc-mips.c (mips_cprestore_valid): New flag.
1370         (mips_frame_reg_valid): New flag.
1371         (macro) [M_JAL_2]: Check both flags.
1372         [M_JAL_A]: Likewise.
1373         (s_cprestore): Set mips_cprestore_valid.
1374         (tc_get_register): If setting mips_frame_reg, set
1375         mips_frame_reg_valid and clear mips_cprestore_valid.
1376         (s_mips_ent): Clear both flags.
1377         (s_mips_end): Clear both flags.
1378
1379 2002-01-05  Alan Modra  <amodra@bigpond.net.au>
1380
1381         * write.c (write_object_file): Make use of bfd_section_list_remove.
1382         * config/obj-ecoff.c (ecoff_frob_file): Likewise.
1383         * config/tc-mmix.c (mmix_frob_file): Likewise.
1384
1385 2002-01-04  Jason Thorpe  <thorpej@wasabisystems.com>
1386
1387         * configure.in (i386-*-netbsdelf*): Collapse target into...
1388         (i386-*-netbsd*): ...this.  Add support for x86-64.
1389         * configure: Regenerated.
1390
1391 2002-01-03  matthew green  <mrg@redhat.com>
1392
1393         * config/tc-ppc.c (md_parse_option): BookE is not Motorola specific.
1394
1395 2002-01-02  Nick Clifton  <nickc@cambridge.redhat.com>
1396
1397         * config/tc-m68k.c (md_estimate_size_before_relax): Test for a
1398         NULL frag link.
1399
1400 For older changes see ChangeLog-0001
1401 \f
1402 Local Variables:
1403 mode: change-log
1404 left-margin: 8
1405 fill-column: 74
1406 version-control: never
1407 End: