* gas/config/tc-arm.c (ARM_EXT_MAVERIK): New macro.

[deliverable/binutils-gdb.git] / gas / ChangeLog

2001-10-08  Aldy Hernandez  <aldyh@redhat.com>

        * doc/arm/c-arm.texi (ARM Options): Add arm9e documentation.

        * config/tc-arm.c (ARM_EXT_MAVERIK): New macro.
        (cirrus_regtype): New enum.
        (LONGEST_INST): Change to 10.
        (CIRRUS_MODE1): New.
        (CIRRUS_MODE2): New.
        (CIRRUS_MODE3): New.
        (CIRRUS_MODE4): New.
        (CIRRUS_MODE5): New.
        (CIRRUS_MODE6): New.
        (insns): Add cirrus dsp instructions.
        (ARM_EXT_MAVERIKSC_REG): New.
        (cirrus_register): New.
        (cirrus_mvf_register): New.
        (cirrus_mvd_register): New.
        (cirrus_mvfx_register): New.
        (cirrus_mvdx_register): New.
        (cirrus_mvax_register): New.
        (ARM_EXT_MAVERIKsc_register): New.
        (reg_table): Add cirrus registers.
        (cirrus_valid_reg): New.
        (cirrus_reg_required_here): New.
        (do_c_binops_1): New.
        (do_c_binops_2): New.
        (do_c_binops_3): New.
        (do_c_triple_4): New.
        (do_c_triple_5): New.
        (do_c_quad_6): New.
        (do_c_dspsc_1): New.
        (do_c_dspsc_2): New.
        (do_c_shift_1): New.
        (do_c_shift_2): New.
        (do_c_ldst_1): New.
        (do_c_ldst_2): New.
        (do_c_ldst_3): New.
        (do_c_ldst_4): New.
        (do_c_binops): New.
        (do_c_triple): New.
        (do_c_quad): New.
        (do_c_dspsc): New.
        (do_c_shift): New.
        (cirrus_parse_offset): New.
        (do_c_ldst): New.
        (md_parse_option): Add arm9e.
        (md_show_usage): Same.

2001-10-08  Tom Rix <trix@redhat.com>

        * config/tc-ppc (ppc_bf, ppc_biei) : Set first .bi lineno value to 
        location of next .bf
        * config/obj-coff.c (coff_frob_symbol) : XCOFF does not use endndx.

2001-10-07  Alan Modra  <amodra@bigpond.net.au>

        * config/obj-elf.c: Standardize error/warning messages - don't
        capitalise, no final period or newline, don't say "ignoring" for
        as_bad messages.  In some cases, change the wording to that used
        elsewhere for similar messages.
        (obj_elf_section_name): New function, split out from ..
        (obj_elf_section): .. here.  Correctly mask off SHF_MERGE if
        entsize not specified.

2001-10-05  Jakub Jelinek  <jakub@redhat.com>

        * doc/as.texinfo: Document M and S ELF section flags.

2001-10-05  Alan Modra  <amodra@bigpond.net.au>

        * subsegs.c (subseg_text_p): Return 0 for absolute section.
        * read.c (do_align): If in absolute section, warn about and ignore
        non-zero fill pattern.

2001-10-05  Alexandre Oliva  <aoliva@redhat.com>

        * config/tc-mn10300.c (tc_gen_reloc): Don't free
        reloc->sym_ptr_ptr if it's not allocated.

2001-10-04  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>

        * config/tc-mips.c (prev_insn_reloc_type): Make it an array to hold a
        relocation triple.
        (prev_insn_fixp): Likewise.
        (append_insn): Changed prototype to accept a relocation pointer.
        (imm_reloc): Make it an array.
        (offset_reloc): Likewise.
        (md_assemble): Handle triple relocations.
        (append_insn): Likewise. Add handling for some NewABI relocations.
        (mips_no_prev_insn): Handle triple relocations.
        (macro_build): Likewise. Add handling for some NewABI relocations.
        Move handling for the 'u' case to append_insn().
        (mips16_macro_build): Handle triple relocations.
        (macro_build_lui): Likewise. Don't handle _gp_disp as special symbol
        for NewABI.
        (mips_ip): Handle triple relocations.
        (mips16_ip): Likewise.
        (mips_force_relocation): Force handling of triple relocations
        without symbols for NewABI.
        (md_apply_fix): Add handling for some NewABI relocations.

2001-10-05  Alan Modra  <amodra@bigpond.net.au>

        * config/tc-i386.c (parse_register): If not producing code for
        x86_64, reject x86_64 register name matches.
        (md_assemble): Remove now redundant check for x86_64 regs.

2001-10-04  Alan Modra  <amodra@bigpond.net.au>

        * config/tc-ppc.c (md_assemble <DS relocs>): Test ppc_size as well
        as BFD_DEFAULT_TARGET_SIZE.
        (ppc_tc): Likewise.
        (ppc_is_toc_sym): Likewise.
        (md_apply_fix3): Likewise.

2001-10-03  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>

        * config/tc-mips.c (mips_64): Remove.
        (mips_target_format): Move downwards in file, use HAVE_64BIT_OBJECTS
        in it.
        (mips_abi_level, mips_abi): New enum.
        (mips_32bit_abi): Remove.
        (HAVE*PRS): Use mips_abi instead of mips_32bit_abi.
        (HAVE_NEWABI): New define.
        (HAVE_64BIT_OBJECTS): New define.
        (HAVE_32BIT_ADDRESSES): Don't return true for 64bit objects.
        (HAVE_64BIT_ADDRESSES): New define, inverse of HAVE_32BIT_ADDRESSES.
        (support_64bit_objects): New prototype.
        (md_begin): Use mips_abi instead of mips_32bit_abi. Don't write
        .reginfo section for n32, use .MIPS.options instead.
        (support_64bit_objects): New function, code from md_parse_option.
        (md_longopts): Add -n32 option.
        (md_parse_option): Use mips_abi instead of mips_32bit_abi/mips64.
        Add -n32 option. Protect with OBJ_ELF.
        (s_mipsset): Use mips_abi instead of mips_32bit_abi.
        (mips_elf_final_processing): Likewise. Don't write .reginfo section
        for n32, use .MIPS.options instead.

2001-10-03  Alan Modra  <amodra@bigpond.net.au>

        * po/POTFILES.in: Regenerate.
        * configure: Regenerate.

2001-10-02  Alan Modra  <amodra@bigpond.net.au>

        * config/tc-ppc.c (md_apply_fix3 <BFD_RELOC_CTOR>): Make it 64
        bits if target is 64 bit.

        * doc/as.texinfo (listing): Fix typo.

        * as.c (print_version_id): Use BFD_VERSION_STRING in place of
        BFD_VERSION.
        * Makefile.am (Makefile): Depend on bfd/configure.in.
        Run "make dep-am".
        * Makefile.in: Regenerate.

2001-09-30  H.J. Lu  <hjl@gnu.org>

        * config/obj-elf.c (obj_elf_parse_section_letters): Accept "am"
        and "ams" for compatibility.

2001-09-30  Hans-Peter Nilsson  <hp@bitrange.com>

        * config/tc-sh.c (md_pcrel_from_section): Transformed from
        md_pcrel_from.  Handle pc-relativeness against link-time
        symbol.  Handle relativeness to elsewhere than the fixup.
        * config/tc-sh.h (MD_PCREL_FROM_SECTION): Define.
        (md_pcrel_from_section): Prototype.

        * Makefile.am: Update dependencies with "make dep-am".
        * Makefile.in: Regenerate.

2001-09-30  Stephane Carrez  <Stephane.Carrez@worldnet.fr>

        * config/tc-m68hc11.c (cmp_opcode): Define prototype.
        (print_opcode_format, skip_whites): Likewise.
        (convert_branch, m68hc11_new_insn): Likewise.
        (build_dbranch_insn, build_indexed_byte): Likewise.
        (build_reg_mode, find, find_opcode): Likewise.
        (print_insn_format): Fix call to print_opcode_format.
        (md_assemble): Fix call to build_dbranch_insn.

2001-09-27  Nick Clifton  <nickc@cambridge.redhat.com>

        * config/tc-arm.c: Add missing prototypes.

2001-09-26  Jeff Johnston  <jjohnstn@redhat.com>

        * input-file.c (input_file_open): When reading the
        first line looking for #NO_APP, prepare for the possibility
        of finding #APP instead.  Also fix algorithm to allow
        white-space to follow either #NO_APP or #APP directives.

2001-09-25  Geoff Berry  <geoff.berry@bops.com>

        * listing.c (buffer_line): Don't write past the end of `line' when
        EOF is reached.

2001-09-25  Alexandre Oliva  <aoliva@redhat.com>

        * config/tc-mn10300.c (tc_gen_reloc): Don't emit an *ABS*
        relocation for differences between symbols in a section other
        than the one in which the difference is to be placed; apply
        the relocation instead.

2001-09-24  Nick Clifton  <nickc@cambridge.redhat.com>

        * config/tc-arc.c: Add missing prototype.
        (md_atof): Change type to int. Add missing prototype.
        * config/tc-arc.h: Prototype exported functions.

2001-09-22  Nick Clifton  <nickc@cambridge.redhat.com>

        * as.c: Add missing function prototype.
        * config/obj-aout.c: Fix compile time warning.

2001-09-21  Bruno Haible  <haible@clisp.cons.org>

        * config/tc-openrisc.c: Don't include <ctype.h>.

2001-09-19  Martin Schwidefsky <schwidefsky@de.ibm.com>

        * gas/config/tc-s390.c: Add option -mwarn-areg-zero.

2001-09-19  Alan Modra  <amodra@bigpond.net.au>

        * config/tc-i370.c: Fix typo in last change.

2001-09-19  Nick Clifton  <nickc@cambridge.redhat.com>

        * doc/as.texinfo (Symbol Names): Improve documentation on local
        labels and add documenation about dollar labels.

2001-09-18  Bruno Haible  <haible@clisp.cons.org>

        * as.h: Don't include <ctype.h>.
        * as.c (main): For gettext, also set the LC_CTYPE locate facet.
        * atof-generic.c: Include "safe-ctype.h" instead of <ctype.h>.
        (atof_generic): Use ISDIGIT instead of isdigit.
        * config/m68k-parse.y: Include "safe-ctype.h".
        (yylex): Use ISDIGIT/ISALNUM instead of isdigit/isalnum.
        * config/obj-elf.c: Include "safe-ctype.h".
        (obj_elf_vtable_inherit): Use ISSPACE instead of isspace.
        * config/obj-vms.c: Include "safe-ctype.h".
        (Write_VMS_MHD_Records): Use TOUPPER instead of islower/toupper.
        (VMS_Case_Hack_Symbol): Use ISUPPER/ISLOWER/TOUPPER/TOLOWER
        instead of isupper/islower/toupper/tolower.
        * config/tc-a29k.c: Include "safe-ctype.h" instead of <ctype.h>.
        (insert_sreg): Use TOUPPER instead of islower/toupper.
        (machine_ip): Use ISALPHA/ISALNUM/ISUPPER/TOLOWER instead of
        isalpha/isalnum/isupper/tolower.
        (a29k_unrecognized_line, md_operand): Use ISDIGIT instead of
        isdigit.
        * config/tc-alpha.c: Include "safe-ctype.h" instead of <ctype.h>.
        (md_undefined_symbol, s_alpha_ent): Use ISDIGIT instead of isdigit.
        * config/tc-arc.c: Include "safe-ctype.h" instead of <ctype.h>.
        (md_assemble): Use ISSPACE/ISALNUM instead of isspace/isalnum.
        (arc_extoper): Use TOLOWER instead of isupper/tolower.
        * config/tc-arm.c: Include "safe-ctype.h" instead of <ctype.h>.
        (arm_psr_parse): Use ISALPHA instead of isalpha.
        (accum0_required_here): Use ISALNUM instead of isalnum.
        (do_ldrd): Use ISSPACE instead of isspace.
        (decode_shift): Use ISALPHA instead of isalpha.
        (insert_reg): Use TOUPPER instead of islower/toupper.
        (arm_reg_parse): Use ISALPHA instead of isalpha.
        (arm_parse_reloc): Use ISALNUM/ISPUNCT/TOLOWER instead of
        isalnum/ispunct/tolower.
        * config/tc-avr.c: Include "safe-ctype.h" instead of <ctype.h>.
        (md_parse_option): Use TOLOWER instead of tolower.
        (avr_operand): Use ISDIGIT/TOLOWER instead of isdigit/tolower.
        * config/tc-cris.c: Include "safe-ctype.h" instead of <ctype.h>.
        (cris_process_instruction): Use ISLOWER instead of islower.
        (get_gen_reg): Use ISALNUM/ISDIGIT instead of isalnum/isdigit.
        (get_spec_reg): Use TOLOWER/ISALNUM instead of isupper/tolower/isalnum.
        (get_flags): Use ISSPACE instead of isspace.
        * config/tc-d10v.c: Include "safe-ctype.h" instead of <ctype.h>.
        (do_assemble): Use TOLOWER instead of tolower.
        * config/tc-d30v.c: Include "safe-ctype.h" instead of <ctype.h>.
        (do_assemble): Use TOLOWER instead of tolower.
        (d30v_start_line): Use ISSPACE instead of isspace.
        * config/tc-fr30.c: Include "safe-ctype.h" instead of <ctype.h>.
        (fr30_is_colon_insn): Use TOLOWER instead of tolower.
        * config/tc-h8300.c: Include "safe-ctype.h" instead of <ctype.h>.
        (skip_colonthing, get_operand): Use ISDIGIT instead of isdigit.
        * config/tc-h8500.c: Include "safe-ctype.h" instead of <ctype.h>.
        (start_label): Use ISALPHA instead of isalpha.
        * config/tc-hppa.c: Include "safe-ctype.h" instead of <ctype.h>.
        (pa_ip): Use ISUPPER/ISLOWER/TOLOWER instead of
        isupper/islower/tolower.
        (pa_parse_number): Use ISDIGIT instead of isdigit.
        (pa_chk_field_selector): Use TOLOWER instead of tolower.
        (pa_stringer): Use ISDIGIT instead of isdigit.
        * config/tc-i370.c: Include "safe-ctype.h" instead of <ctype.h>.
        (register_name): Use ISALPHA instead of isalpha.
        (i370_elf_suffix): Use ISALNUM/TOLOWER instead of
        isalnum/islower/tolower.
        (i370_addr_offset): Use ISDIGIT/ISALPHA instead of
        isdigit/isalpha.
        (i370_addr_cons): Use ISALPHA/ISXDIGIT instead of
        isalpha/isxdigit.
        (md_assemble): Use ISSPACE instead of isspace.
        * config/tc-i386.c: Include "safe-ctype.h" instead of <ctype.h>.
        (md_begin): Use ISDIGIT/ISLOWER/ISUPPER/TOLOWER/ISALPHA
        instead of isdigit/islower/isupper/tolower/isalpha.
        (output_invalid): Use ISPRINT instead of isprint.
        * config/tc-i860.c: Include "safe-ctype.h" instead of <ctype.h>.
        (i860_ip): Use ISLOWER/ISDIGIT instead of islower/isdigit.
        * config/tc-i960.c: Include "safe-ctype.h" instead of <ctype.h>.
        (get_args): Use ISALNUM instead of isalnum.
        * config/tc-ia64.c: Include "safe-ctype.h".
        (dot_pred_rel): Use TOUPPER/ISDIGIT instead of toupper/isdigit.
        (ia64_unrecognized_line): Use ISDIGIT instead of isdigit.
        (ia64_parse_name): Likewise.
        * config/tc-m32r.c: Include "safe-ctype.h" instead of <ctype.h>.
        (assemble_two_insns): Use ISSPACE/ISALNUM/ISUPPER/TOLOWER
        instead of isspace/isalnum/isupper/tolower.
        * config/tc-m68hc11.c: Include "safe-ctype.h" instead of <ctype.h>.
        (md_assemble): Use TOLOWER/ISALNUM instead of tolower/isalnum.
        * config/tc-m68k.c: Include "safe-ctype.h" instead of <ctype.h>.
        (mklower_table): Remove variable.
        (mklower): Remove macro.
        (insert_reg): Use TOUPPER instead of islower/toupper.
        (md_begin): Remove initialization of mklower_table.
        (s_reg): Use ISALNUM instead of isalnum.
        (mri_assemble): Use ISUPPER/TOLOWER instead of isupper/tolower.
        (parse_mri_condition): Use TOLOWER instead of isupper/tolower.
        (build_mri_control_operand): Use TOLOWER instead of tolower.
        (s_mri_else, s_mri_break, s_mri_next, s_mri_for): Likewise.
        * config/tc-m88k.c: Include "safe-ctype.h" instead of <ctype.h>.
        (md_assemble): Use ISSPACE instead of isspace.
        (get_imm16): Use ISALNUM instead of isalnum.
        (get_cnd): Use ISDIGIT/ISUPPER/TOLOWER instead of
        isdigit/isupper/tolower.
        (get_bf_offset_expression): Use ISALPHA/ISUPPER/TOLOWER
        instead of isalpha/isupper/tolower.
        (hexval): Use ISDIGIT/ISLOWER/ISUPPER instead of
        isdigit/islower/isupper.
        * config/tc-mcore.c: Include "safe-ctype.h" instead of <ctype.h>.
        (mcore_s_section): Use ISSPACE instead of isspace.
        (parse_reg): Use ISSPACE/TOLOWER/ISALNUM instead of
        isspace/tolower/isalnum.
        (parse_creg): Use ISSPACE/TOLOWER instead of isspace/tolower.
        (parse_psrmod): Use TOLOWER instead of isascii/tolower.
        (parse_exp, parse_mem, md_assemble): Use ISSPACE instead of
        isspace.
        * config/tc-mips.c: Include "safe-ctype.h" instead of <ctype.h>.
        (mips_ip): Use ISSPACE/ISDIGIT instead of isspace/isdigit.
        (mips16_ip): Use ISLOWER/ISDIGIT instead of islower/isdigit.
        (my_getSmallExpression): Use ISDIGIT/TOLOWER instead of
        isdigit/tolower.
        (tc_get_register): Likewise.
        (get_number): Use ISDIGIT/ISXDIGIT instead of isdigit/isxdigit.
        (s_mips_ent): Use ISDIGIT instead of isdigit.
        * config/tc-mn10200.c: Include "safe-ctype.h" instead of <ctype.h>.
        (md_assemble): Use ISSPACE instead of isspace.
        * config/tc-mn10300.c: Include "safe-ctype.h" instead of <ctype.h>.
        (md_assemble): Use ISSPACE instead of isspace.
        * config/tc-ns32k.c: Don't include <ctype.h>.
        * config/tc-pdp11.c: Include "safe-ctype.h".
        (mklower): Remove function.
        (parse_reg): Use TOLOWER instead of mklower.
        * config/tc-pj.c: Include "safe-ctype.h".
        (md_assemble): Use ISSPACE instead of isspace.
        * config/tc-ppc.c: Include "safe-ctype.h" instead of <ctype.h>.
        (register_name): Use ISALPHA instead of isalpha.
        (ppc_elf_suffix): Use ISALNUM/TOLOWER instead of
        isalnum/islower/tolower.
        (md_assemble): Use ISSPACE instead of isspace.
        (ppc_canonicalize_symbol_name): Use ISLOWER/TOUPPER instead of
        islower/toupper.
        * config/tc-s390.c: Include "safe-ctype.h" instead of <ctype.h>.
        (register_name): Use ISALPHA instead of isalpha.
        (s390_elf_suffix, s390_lit_suffix): Use ISALNUM instead of isalnum.
        (md_gather_operands, md_assemble, s390_insn): Use ISSPACE instead of
        isspace.
        * config/tc-sh.c: Include "safe-ctype.h" instead of <ctype.h>.
        (sh_elf_suffix): Use ISALNUM/TOLOWER instead of
        isalnum/islower/tolower.
        (IDENT_CHAR): Use ISALNUM instead of isalnum.
        (parse_reg): Use TOLOWER instead of tolower.
        (find_cooked_opcode): Use TOLOWER instead of isupper/tolower.
        * config/tc-sparc.c: Include "safe-ctype.h" instead of <ctype.h>.
        (sparc_ip): Use ISLOWER/ISDIGIT instead of islower/isdigit.
        (parse_keyword_arg): Use ISALNUM instead of isalnum.
        * config/tc-tahoe.c: Include "safe-ctype.h".
        (tahoe_reg_parse): Use ISDIGIT instead of isdigit.
        (tip_op): Use TOLOWER instead of isupper/tolower.
        * config/tc-tic30.c: Include "safe-ctype.h".
        (md_begin): Use ISLOWER/ISDIGIT/ISUPPER/TOLOWER/ISLOWER/
        ISALPHA instead of islower/isdigit/isupper/tolower/islower/isalpha.
        (tic30_operand): Use TOLOWER instead of tolower.
        (tic30_find_parallel_insn): Likewise.
        (output_invalid): Use ISPRINT instead of isprint.
        * config/tc-tic54x.c: Include "safe-ctype.h".
        (tic54x_asg, tic54x_eval): Use ISALPHA instead of isalpha.
        (lookup_version): Use TOUPPER instead of toupper.
        (tic54x_var): Use ISALPHA instead of isalpha.
        (tic54x_mlib): Use ISSPACE instead of isspace.
        (subsym_iscons): Use TOUPPER instead of toupper.
        (get_operands): Use ISSPACE instead of isspace.
        (is_type): Use TOUPPER/ISDIGIT instead of toupper/isdigit.
        (encode_indirect, encode_operand): Use TOUPPER instead of toupper.
        (next_line_shows_parallel): Use ISSPACE instead of isspace.
        (subsym_get_arg, subsym_substitute): Use ISDIGIT instead of isdigit.
        (tic54x_start_line_hook, md_assemble, tic54x_start_label): Use
        ISSPACE instead of isspace.
        * config/tc-tic80.c: Include "safe-ctype.h".
        (md_assemble): Use ISSPACE instead of isspace.
        * config/tc-v850.c: Include "safe-ctype.h" instead of <ctype.h>.
        (system_register_name): Use ISDIGIT instead of isdigit.
        (md_assemble): Use ISSPACE instead of isspace.
        * config/tc-vax.c: Include "safe-ctype.h" instead of <ctype.h>.
        (vax_reg_parse): Use TOLOWER/ISDIGIT instead of
        isupper/tolower/isdigit.
        (vip_op): Use TOLOWER instead of isupper/tolower.
        * config/tc-w65.c: Don't include <ctype.h>.
        * config/tc-z8k.c: Include "safe-ctype.h" instead of <ctype.h>.
        (tohex): Use ISDIGIT/ISLOWER instead of isdigit/islower.
        (whatreg): Use ISDIGIT instead of isdigit.
        * ecoff.c: Include "safe-ctype.h" instead of <ctype.h>.
        (ecoff_directive_ent, ecoff_stab): Use ISDIGIT instead of isdigit.
        * expr.c: Include "safe-ctype.h" instead of <ctype.h>.
        (integer_constant): Use ISALNUM/TOUPPER instead of
        isalnum/islower/toupper.
        (operand): Use TOLOWER instead of isupper/tolower.
        * gasp.c: Include "safe-ctype.h" instead of <ctype.h>.
        (sb_strtol, level_0, change_base, doinstr): Use ISDIGIT instead
        of isdigit.
        (process_assigns, whatcond): Use TOUPPER instead of toupper.
        (chartype_init): Use ISALPHA/ISDIGIT instead of isalpha/isdigit.
        (main): For gettext, also set the LC_CTYPE locate facet.
        * hash.c: Include "safe-ctype.h".
        (main): Use TOLOWER instead of isupper/tolower.
        * itbl-lex.l: Don't include <ctype.h>.
        * listing.c: Include "safe-ctype.h" instead of <ctype.h>.
        (listing_newline): Use ISCNTRL instead of isascii/iscntrl. Don't
        omit non-ASCII characters.
        (debugging_pseudo): Use ISSPACE instead of isspace.
        * macro.c: Include "safe-ctype.h" instead of <ctype.h>.
        (buffer_and_nest): Use ISALNUM instead of isalnum.
        (get_token): Use ISALPHA/ISALNUM instead of isalpha/isalnum.
        (define_macro): Use ISUPPER/TOLOWER instead of isupper/tolower.
        (macro_expand_body): Use ISALNUM/ISDIGIT/ISUPPER/ISALPHA
        instead of isalnum/isdigit/isupper/isalpha.
        (check_macro): Use ISALPHA/ISALNUM/ISUPPER/TOLOWER instead
        of isalpha/isalnum/isupper/tolower.
        * read.c: Include "safe-ctype.h" instead of <ctype.h>.
        (read_a_source_file): Use ISUPPER/TOLOWER/ISDIGIT instead of
        isupper/tolower/isdigit.
        (s_mri_common): Use ISDIGIT instead of isdigit.
        (s_mri_sect): Use ISDIGIT/TOUPPER instead of isdigit/toupper.
        (s_float_space): Use ISALPHA instead of isalpha.
        (ignore_rest_of_line): Use ISPRINT instead of isprint.
        (float_cons): Use ISALPHA instead of isalpha.
        (next_char_of_string): Use ISDIGIT/ISXDIGIT instead of
        isdigit/isxdigit.
        * symbols.c: Include "safe-ctype.h" instead of <ctype.h>.
        (save_symbol_name): Use ISLOWER/TOUPPER instead of
        islower/toupper.
        (symbol_find_base): Use TOUPPER instead of islower/toupper.
        (decode_local_label_name): Use ISDIGIT instead of isdigit.

2001-09-18  Martin Schwidefsky <schwidefsky@de.ibm.com>

        * tc-s390.c (s390_insn): Add code to cope with 6 byte O_constants
        in 64 bit mode and make format "e" work.

2001-09-18  Alan Modra  <amodra@bigpond.net.au>

        * dwarf2dbg.c (dwarf2_directive_file): Avoid signed/unsigned warning.

        * write.c (set_symtab): Update bfd_alloc declaration.  Use a temp
        var to ensure bfd_alloc arg is the right type.
        (write_object_file): Cast args of bfd_seek.  Replace bfd_write with
        bfd_bwrite.

        * config/obj-coff.c: Replace calls to bfd_write with calls to
        bfd_bwrite.  Cast args of bfd_seek.

        * config/obj-elf.c (obj_elf_change_section): Avoid signed/unsigned
        warning.

        * config/tc-mn10300.c (set_arch_mach): Make param unsigned.

        * config/tc-tic54x.c (tic54x_mlib): Replace bfd_read call with
        call to bfd_bread.

2001-09-15  Hans-Peter Nilsson  <hp@bitrange.com>

        * config/tc-sh.h (sh_force_relocation): Prototype.
        (struct fix): Forward declare.
        * config/tc-sh.c (type sh_operand_info): Move to top of file.
        (cons, s_align_bytes): Remove old-type declarations.
        (sh_elf_suffix, parse_reg, dot, parse_exp, parse_at, get_operand,
        get_operands, get_specific, insert, build_relax,
        insert_loop_bounds, build_Mytes): Prototype.
        (little): Make static.  Prototype.
        (check, tc_Nout_fix_to_chars): Delete unused functions.

2001-09-14  Eric Christopher  <echristo@redhat.com>

        * config/tc-mips.c (md_parse_option): Remove setting mips_64 via
        -mgp32/mgp64.

2001-09-14  Kevin Lo <kevlo@openbsd.org>

        * configure.in: Add arm-openbsd target.
        * configure: Regenerate.

2001-09-14  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>

        * configure.in: Change machine triplets from mips-*-linux-gnu* to
        mips*-*-linux*.

2001-09-12  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>

        * config/tc-mips.c (append_insn): Don't rightshift BFD_RELOC_16_PCREL.

2001-09-11  Richard Henderson  <rth@redhat.com>

        * config/tc-alpha.c (alpha_elf_section_letter): New.
        (alpha_elf_section_flags): New.
        * config/tc-alpha.h (md_elf_section_letter): New.
        (md_elf_section_flags): New.
        * config/tc-ia64.c (ia64_elf_section_letter): New.
        * config/tc-ia64.h (md_elf_section_letter): New.

2001-09-11  Jakub Jelinek  <jakub@redhat.com>

        * config/obj-elf.c (obj_elf_parse_section_letters): Use 'M' instead
        of 'm', 'S' instead of 's'.  Update bad_msg.
        * config/tc-ppc.c (ppc_section_letter): Update bad_msg.
        * config/tc-i370.c (i370_sectioN_letter): Update bad_msg.

2001-09-09  Alan Modra  <amodra@bigpond.net.au>

        * expr.c (expr): Move code setting "retval" to the end of the loop,
        and rearrange for efficiency.  For "PIC code" subtraction, use
        "rightseg" rather than recalculating.  For "symbol OP symbol"
        subtract, set "retval" to absolute_section if symbols in same
        section.
        * symbols.c (resolve_symbol_value): Resolve "sym +/- expr" to an
        O_symbol.  Simplify a +/- b code.  Allow equality and non-equality
        comparisons on symbols from any section.  Allow other comparison
        operators as for subtraction.
        (symbol_equated_reloc_p): New predicate function.
        * symbols.h (symbol_equated_reloc_p): Declare.
        * write.c (relax_segment <rs_machine_dependent>): Ensure segment
        for expression syms is set correctly.
        (adjust_reloc_syms): Use symbol_equated_reloc_p.
        (write_relocs): Likewise.
        (write_object_file): Likewise.
        * config/tc-mips.c (md_estimate_size_before_relax): Likewise.
        * config/tc-i386.c (md_assemble <Output jumps>): Don't lose part
        of a complex expression when setting up frag_var.

2001-09-07  Richard Henderson  <rth@redhat.com>

        * config/tc-alpha.c (alpha_reloc_op_tag): Replace need_seq with
        require_seq and allow_seq.  Let !literal omit the sequence number.
        (tokenize_arguments): Reject sequence numbers of !allow_seq.

2001-09-08  Jakub Jelinek  <jakub@redhat.com>

        * config/tc-sparc.c (md_apply_fix3): Handle relocs against SEC_MERGE
        section symbols the same way as externs.

2001-09-07  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>

        * config/tc-mips.c (s_mipsset): Reallow unrestricted use of .set mipsX
        pseudo-op.

2001-09-07  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>

        * config/tc-mips.c (append_insn): Handle BFD_RELOC_16_PCREL.
        (macro_build): Use BFD_RELOC_16_PCREL_S2 only for embedded
        PIC, BFD_RELOC_16_PCREL for the rest.
        (mips_ip): Likewise.
        (md_pcrel_from): return the right offset for the differently shifted
        pcrel relocs.
        (md_apply_fix): Handle BFD_RELOC_16_PCREL.

2001-09-05  Richard Henderson  <rth@redhat.com>

        * config/tc-ia64.c (FUNC_IPLT_RELOC): New.
        (pseudo_func): Add @iplt.
        (pseudo_opcode): Add data16 and data16.ua.
        (md_begin): Set iplt pseudo.
        (ia64_cons_fix_new): Handle 16 byte iplt reloc specially.

2001-09-04  Richard Henderson  <rth@redhat.com>

        * config/tc-alpha.c (struct alpha_insn): Make sequence scalar long.
        (MACRO_LITERAL, MACRO_BASE, MACRO_BYTOFF, MACRO_JSR): Remove.
        (alpha_macros): Remove occurrences of same.
        (O_lituse_addr, O_gprel): New.
        (DUMMY_RELOC_LITUSE_*): New.
        (s_alpha_ucons, s_alpha_arch): Prototype.
        (alpha_reloc_op): Construct elements via DEF macro.
        (ALPHA_RELOC_SEQUENCE_OK): Remove.
        (struct alpha_reloc_tag): Rename from alpha_literal_tag; rename
        members to not be literal specific.
        (next_sequence_num): New.
        (md_apply_fix3): Cope with missing GPDISP_LO16.  Adjust for
        added/removed BFD relocations.
        (alpha_force_relocation, alpha_fix_adjustable): Likewise.
        (alpha_adjust_symtab_relocs): Handle GPDISP relocs as well.
        (tokenize_arguments): Parse ! relocations properly.
        (find_macro_match): Delete unused macro argument types.
        (assemble_insn): Add reloc parameter; emit that instead of the
        default as appropriate.
        (get_alpha_reloc_tag): New.  Split from ...
        (emit_insn): ... here.  Allocate a reloc tag for GPDISP.
        (assemble_tokens): Don't search macros if user relocation present.
        Copy reloc sequence number to insn struct.
        (emit_ldgp): Remove user reloc handling.
        (load_expression, emit_lda, emit_ldah, emit_ir_load): Likewise.
        (emit_loadstore, emit_ldXu, emit_ldil, emit_stX): Likewise.
        (emit_sextX, emit_division, emit_jsrjmp, emit_retjcr): Likewise.
        * config/tc-alpha.h (tc_adjust_symtab): Always define.
        (struct alpha_fix_tag): Name members less literal specific.

Tue Sep  4 20:01:19 2001  Jeffrey A Law  (law@cygnus.com)

        * tc-h8300.c (tc_gen_reloc): Give an error if we try to take the
        address of two symbols in different sections.

2001-08-31  Eric Christopher  <echristo@redhat.com>
            Jason Eckhardt  <jle@redhat.com>

        * config/tc-mips.c (mips_cpu_info): Add support for mipsisa32,
        5kc, and 20kc.  Clean up old entries.

Fri Aug 31 12:05:13 2001  J"orn Rennecke <amylaar@redhat.com>
                          Jeff Law <law@redhat.com>

        * config/tc-h8300.c (build_bytes): For OBJ_ELF, make relocation's
        offset match H8 ELF spec.
        (md_section_align): Alternate implementation for BFD_ASSEMBLER.
        (md_apply_fix): Fix argument and return types for BFD_ASSEMBLER.

        * tc-h8300.c (relocation mappings): Remove.  Moved to tc-h8300.h.
        (build_bytes): Mark fixups for PCrel branches as signed.  For
        OBJ_ELF, make sure the reloc's offset points to the first byte
        to be modified.
        (md_convert_frag): Update definiton based on BFD_ASSEMBLER.
        * tc-h8300.h (relocation mappings): Add.

Thu Aug 30 12:05:13 2001  J"orn Rennecke <amylaar@redhat.com>

        * tc-h8300.c (tc_crawl_symbol_chain, tc_headers_hook): Don't
        define for BFD_ASSEMBLER.
        (tc_reloc_mangle): Likewise.
        (tc_gen_reloc): New function for BFD_ASSEMBLER.

Wed Aug 29 12:49:58 2001  Jeffrey A Law  (law@cygnus.com)

        * config/tc-h8300.c (h8300hmode): Record the machine type
        if BFD_ASSEMBLER is defined.
        (h8300smode, md_begin): Similarly.

2001-08-29  Joel Sherrill <joel@OARcorp.com>

        * configure.in (i[3456]86-*-rtems*, m68*-*-rtems*): Change
        default from coff to elf.
        * configure: Regenerate.

Wed Aug 29 12:05:13 2001  J"orn Rennecke <amylaar@redhat.com>

        * tc-h8300.c: If OBJ_ELF, include elf/h8.h, and define
        assorted coff relocations to the corresponding elf relocations.
        * tc-h8300.h (TARGET_ARCH, TARGET_FORMAT): Define appropriately.

        * configure.in: Add case for h8300-*-elf.
        * configure: Regenerate.

Wed Aug 29 12:05:13 2001  J"orn Rennecke <amylaar@redhat.com>

        * doc/internals.texi (MD_PCREL_FROM_SECTION): Change
        documentation to reflect reality.

2001-08-27  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>

        * config/tc-mips.c (load_address): Reflect change to MAX_GPREL_OFFSET.
        (macro): Reflect change to MAX_GPREL_OFFSET.

2001-08-27  Torbjorn Granlund  <tege@swox.com>
            Staffan Ulfberg  <staffanu@swox.se>
            Linus Nordberg  <linus@swox.se>
            Alan Modra  <amodra@bigpond.net.au>

        * configure.in: Recognise powerpc*le*, not just powerpcle*.
        * configure: Regenerate.
        * config/tc-ppc.c (PPC_LO, PPC_HI, PPC_HA, PPC_HIGHER,
        PPC_HIGHERA, PPC_HIGHEST, PPC_HIGHESTA, SEX16): New macros.
        (md_assemble): Use them.
        (ppc_machine): Support stub for ELF64 as well as XCOFF.
        (md_pseudo_table): Add "llong", "quad".
        (md_parse_option): Match default_cpu of powerpc*.
        (ppc_arch): Likewise.
        (ppc_subseg_align): Only for OBJ_XCOFF.
        (ppc_target_format): Return elf64-powerpc strings for 64 bit ELF.
        (md_begin): Select PPC_OPCODE_64 for 64 bit.
        (ppc_insert_operand): Don't bother testing 'file' before calling
        as_bad_where.  Use as_bad_where for operand->insert errors.
        (mapping): Add ELF64 relocation modifiers.
        (ppc_elf_suffix): Replace symbol on BFD_RELOC_PPC64_TOC reloc
        expressions with abs_symbol.
        (ppc_elf_cons): Correct offset for little endian targets.
        (ppc_elf_frob_symbol): New.
        (md_assemble): Add support for 64 bit ELF relocs.
        (ppc_tc): Ensure 8 byte alignment when 64 bit.
        (ppc_is_toc_sym): Only define for OBJ_XCOFF and OBJ_ELF.  Match
        ".toc" section for 64 bit ELF.
        (ppc_fix_adjustable): New.  Macro body moved from tc-ppc.h.
        (md_apply_fix3): Silence warning with ATTRIBUTE_UNUSED.  Only do
        the ppc_is_toc_sym check for OBJ_XCOFF and OBJ_ELF.  For 64 bit,
        use BFD_RELOC_PPC64_TOC16_DS instead of BFD_RELOC_PPC_TOC16.
        Expand on comments, error message.  Add support for 64 bit relocs,
        and use PPC_HI etc. macros.
        * config/tc-ppc.h (MAX_MEM_FOR_RS_ALIGN_CODE): Define.
        (HANDLE_ALIGN): Define to generate nops in code sections rather
        than zeros.
        (TC_FORCE_RELOCATION): Force for BFD_RELOC_PPC64_TOC.
        (ELF_TC_SPECIAL_SECTIONS): Add 64 bit ELF sections.
        (tc_fix_adjustable): Move body of macro to tc-ppc.c.
        (ppc_fix_adjustable): Declare.
        (tc_frob_symbol): Define.
        (ppc_elf_frob_symbol): Declare.

2001-08-26  Andreas Jaeger  <aj@suse.de>

        * config/tc-s390.c: Add missing prototypes
        (md_gather_operands): Make static.

2001-08-26  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>

        * config/tc-mips.h (MAX_GPREL_OFFSET): Change it to the maximum
        allowed value, not the word beyond maximum.
        * config/tc-mips.c (macro_build_lui): Code cleanup.
        (macro): Reflect change to MAX_GPREL_OFFSET.
        (mips_ip): Check explicitly against S_EX_NONE.
        (my_get_SmallExpression): parse for %gp_rel, not %gprel.
        (md_apply_fix): Code cleanup.

2001-08-24  Andreas Jaeger  <aj@suse.de>

        * config/tc-ppc.h: Fix prototype declaration.

2001-08-23  Jakub Jelinek  <jakub@redhat.com>

        * config/tc-ia64.c (dot_endp): Set function symbol sizes.
        * config/obj-elf.c (obj_elf_size): When size is constant, free
        and clear symbol_get_obj(sym)->size if any.

2001-08-21  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>

        * config/tc-mips.c (md_begin): Warn about incompatibility between
        -march=FOO and -mipsN option, continue with default ISA.

2001-08-21  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>

        * config/tc-mips.c (md_parse_option): #ifdef the
        traditional/non-traditional names as it is done in mips_target_format.

2001-08-20  Richard Henderson  <rth@redhat.com>

        * config/tc-alpha.h (MD_APPLY_FIX3): Define.
        * config/tc-alpha.c (md_apply_fix3): Rename from md_apply_fix;
        use seg parameter instead of now_seg.

2001-08-18  H.J. Lu  <hjl@gnu.org>

        * config/tc-mips.c (show): Add the missing prototype.

2001-08-18  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>

        * config/tc-mips.c (S_EX_*): New enum for my_getSmallExpression()
        return values.
        (mips_ip): Use the new return values instead of characters. Add
        support for %higher and %highest.
        (LP): Remove.
        (RP): Remove.
        (my_getSmallExpression): Make parsing case insensitive and more
        reliable. Add support for %higher and %highest. Further support to
        parse %gprel and %neg is implemented but currently deactivated.

2001-08-17  Alan Modra  <amodra@bigpond.net.au>

        * ecoff.c (ecoff_frob_symbol): Remove casts from bfd_get_gp_size.
        (ecoff_build_symbols): Likewise.
        * read.c (s_lcomm_internal): Fix signed/unsigned warning.

2001-08-16  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>

        * config/tc-mips.c (mips_elf_final_processing): Set elf header flags
        for n32 ABI if appropriate.

2001-08-16  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>

        * config/tc-mips.c (cons_fix_new_mips): Remove.
        * config/tc-mips.h (TC_CONS_FIX_NEW): Remove.
        (cons_fix_new_mips): Remove.

2001-08-14  Jeff Johnston  <jjohnstn@redhat.com>

        * expr.c (operand)[LITERAL_PREFIXDOLLAR_HEX]: Treat $L as
        a label, not a hex constant.

2001-08-13  Nick Clifton  <nickc@cambridge.redhat.com>

        * config/tc-v850.h: Add missing prototypes.

2001-08-12  Martin Schwidefsky  <schwidefsky@de.ibm.com>

        * config/tc-s390.c (s390_elf_cons): Correct fixups for PLT
        relocations.

2001-08-12  TAKAI Kousuke  <takai@vlsi.kuee.kyoto-u.ac.jp>

        * config/tc-sparc.c (cons_fix_new_sparc): Move
        `sparc_no_align_cons = 0;' to...
        (s_uacons): ...here so that sparc_no_align_cons will get
        cleared properly.

2001-08-11  Kazu Hirata  <kazu@hxi.com>

        * config/tc-mips.c: Fix a comment typo.

2001-08-10  Richard Sandiford  <rsandifo@redhat.com>

        * config/tc-mips.c (move_register): New function.
        (macro_build): Remove OPCODE_IS_MEMBER's gp32 argument.
        (mips_ip): Likewise.
        (macro2): Use move_register rather than macro_build for moves.
        (mips16_macro): Likewise.
        (macro): Likewise.  Handle M_MOVE.

2001-08-10  Andreas Jaeger  <aj@suse.de>

        * configure.in: Add -Wstrict-prototypes and -Wmissing-prototypes
        to build warnings.
        * configure: Regenerate.

2001-08-10  Alan Modra  <amodra@bigpond.net.au>

        * as.h (alloca): Don't declare if __GNUC__.  Remove an old comment.
        Comment indentation of #pragma.
        * macro.c (alloca): Likewise.

        * config/tc-ppc.c: Revert 2001-08-08.

2001-08-09  Alan Modra  <amodra@bigpond.net.au>

        * symbols.c: Add missing prototypes.
        * config/e-i386elf.c: Likewise.
        * config/e-i386coff.c: Likewise.
        * config/e-i386aout.c: Likewise.
        * config/obj-coff.c: Likewise.
        (def_symbol_in_progress, stack): Move definition.
        * config/obj-elf.c: Add missing prototypes.
        (obj_elf_change_section): Make static.
        (obj_elf_parse_section_letters): Likewise.
        (obj_elf_section_word): Likewise.
        (obj_elf_section_type): Likewise.

2001-08-08  Alan Modra  <amodra@bigpond.net.au>

        From 1999-10-25  Torbjorn Granlund  <tege@swox.com>
        * config/tc-ppc.c (md_apply_fix3): Replace haphazard code for
        determining reloc type with code reading operands->reloc field.

2001-08-08  Alan Modra  <amodra@bigpond.net.au>

        * config/obj-elf.c (elf_copy_symbol_attributes): Make it a global
        function, and expand old obj-elf.h OBJ_COPY_SYMBOL_ATTRIBUTES here.
        * config/obj-elf.h (elf_copy_symbol_attributes): Declare.
        (OBJ_COPY_SYMBOL_ATTRIBUTES): Call elf_copy_symbol_attributes.

        * output-file.c (output_file_create): Don't try to open a second
        time as it's unnecessary.  FOPEN_W was undefined too.

2001-08-07  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>

        * config/tc-mips.c (macro_build): Replace magic constants by defines.
        (mips_ip): Likewise. Typo.

2001-08-04  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>

        * config/tc-mips.c (mips_abi_string): Initialize with NULL instead
        of 0.
        (RELAX_ENCODE): Replace bfd_vma by valueT.
        (load_address): Formatting.
        (macro): Likewise. Code cleanup. Typo.
        (macro2): Formatting.
        (md_parse_option): Typo.
        (s_mipsset): Reorder cases to look nicer.
        (md_estimate_size_before_relax): Formatting. Code cleanup.
        (mips_elf_final_processing): Check against NULL instead of 0.
        (md_obj_end): Remove ugly `' in message string.
        (s_mips_ent): Remove ugly `' in message string.

2001-07-30  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>

        * config/tc-mips.c (md_begin): Take -mcpu value into account even when
        -mipsX is specified. Make both -mcpu/-march and -mcpu/-mtune pairs
        mutually exclusive (if they are different).
        (md_parse_option): Warn if an -march/-mtune/-mcpu/-m<cpu> option is
        set more than once.

2001-08-03  Richard Sandiford  <rsandifo@redhat.com>

        * config/tc-mips.c (md_apply_fix): Don't subtract the symbol value
        from GPREL addends.

2001-08-02  Richard Sandiford  <rsandifo@redhat.com>

        * doc/c-mips.tex (-mgp32, -mfp32): Added -mfp32, unified with -mgp32.
        * config/tc-mips.c (mips_fp32, mips_32bit_abi): New static variables.
        (md_long_opts): Add -mfp32 option.
        (md_parse_option): Handle it.  Set mips_32bit_abi given -mabi=32.
        (md_show_usage): Show usage for -mfp32 and -mgp32.
        (HAVE_32BIT_GPRS, HAVE_32BIT_FPRS): New macros.
        (HAVE_64BIT_GPRS, HAVE_64BIT_FPRS): New macros, inverse of the above.
        (HAVE_32BIT_ADDRESSES): New macro.
        (load_register): Use HAVE_32BIT_GPRS to determine the register width.
        (load_address): Use HAVE_32BIT_ADDRESSES to determine the address size.
        (s_cprestore, s_cpadd): Likewise.
        (macro): Use HAVE_32BIT_GPRS to determine the width of registers
        used in branch and M_LI_D macros.  Use HAVE_64BIT_FPRS to determine
        the width registers used in M_LI_DD macros.  Use HAVE_32BIT_ADDRESSES
        to determine the width of addresses in load, store and jump macros.
        (macro2): Use HAVE_32BIT_GPRS to determine the width of registers
        used in set instructions; do not check the address size for them.
        Use HAVE_32BIT_ADDRESSES to determine the width of addresses in
        unaligned load and store macros.
        (mips_ip): Use the new macros to check the width of a register when
        processing float constants.  Force a constant into memory if it is
        destined for an FPR and the FPRs are wider than the GPRs.  Warn about
        odd FPR numbers if HAVE_32BIT_FPRS.  Use HAVE_32BIT_GPRS rather
        than mips_gp32 to select synthetic instructions.
        (macro_build): Use HAVE_32BIT_GPRS rather than mips_gp32 to select
        synthetic instructions.

2001-08-01  Christian Groessler <cpg@aladdin.de>

        * config/tc-z8k.c (parse_reg): If a string starts with "r", "rl",
        "rh", "rr", "rq", or "sp" then don't automatically assume
        it's a register name.  Check whether there is a number
        following.

2001-08-01  Alan Modra  <amodra@bigpond.net.au>

        * config/tc-i386.c (lex_got): Match lower case relocation tokens.
        Don't allocate more space than necessary for the input line copy.

2001-08-01  Alan Modra  <amodra@bigpond.net.au>

        * read.c: Standardize error/warning messages - don't capitalise, no
        final period or newline, don't say "ignored" or "zero assumed" for
        as_bad messages.  In some cases, change the wording to that used
        elsewhere for similar messages.
        * app.c: Likewise.
        * as.c: Likewise.
        * atof-generic.c: Likewise.
        * cgen.c: Likewise.
        * cond.c: Likewise.
        * depend.c: Likewise.
        * dwarf2dbg.c: Likewise.
        * ecoff.c: Likewise.
        * expr.c: Likewise.
        * frags.c: Likewise.
        * input-file.c: Likewise.
        * input-scrub.c: Likewise.
        * listing.c: Likewise.
        * output-file.c: Likewise.
        * stabs.c: Likewise.
        * subsegs.c: Likewise.
        * symbols.c: Likewise.
        * write.c: Likewise.
        * ecoff.c (ecoff_directive_end): Test for missing name by
        comparing input line pointers rather than reading string.
        (ecoff_directive_ent): Likewise.
        * read.c (s_set): Likewise.
        (s_align): Report a warning rather than an error for
        alignment too large.
        (s_comm): Check for missing symbol name.
        (s_lcomm_internal): Likewise.
        (s_lsym): Likewise.
        (s_globl): Use is_end_of_line instead of looking for '\n'.
        (s_lcomm_internal): Likewise.
        (ignore_rest_of_line): Report a warning rather than an error.

2001-07-31  Geoffrey Keating  <geoffk@redhat.com>

        * config/tc-ppc.c (ppc_elf_validate_fix): It's OK to have
        any kind of relocation against a not-loaded section.

2001-07-30  Alan Modra  <amodra@bigpond.net.au>

        * config/obj-elf.c (obj_elf_symver): Temporarily modify lex_type
        to include '@' in symbol names when parsing versioned symbols
        rather than calling get_symbol_end multiple times.
        * config/tc-i370.c (register_name): Format fixes.  Don't call
        get_symbol_end after parsing number.
        * config/tc-mn10200.c (data_register_name): Format fixes.  Hoist
        code out of conditional.
        (address_register_name): Likewise.
        (other_register_name): Likewise.
        * config/tc-mn10300.c (r_register_name): Likewise.
        (xr_register_name): Likewise.
        (data_register_name): Likewise.
        (address_register_name): Likewise.
        (other_register_name): Likewise.
        * config/tc-ppc.c (register_name): Likewise.
        * config/tc-s390.c (register_name): Likewise.

2001-07-27  Stephane Carrez  <Stephane.Carrez@worldnet.fr>

        * config/tc-m68hc11.c (md_estimate_size_before_relax): Fix bsr
        and bra relax: update fragP->fr_fix after the fixup.

2001-07-27  Tracy Kuhrt  <Tracy.Kuhrt@microchip.com>

        * read.c (s_set): Check for missing symbol name.

2001-07-26  Alan Modra  <amodra@bigpond.net.au>

        * write.c (relax_segment <rs_space>): Account for fr_fix.

2001-07-25  H.J. Lu  <hjl@gnu.org>

        * config/tc-mips.c (md_estimate_size_before_relax): Make sure
        we treat weak like extern only for ELF.
        (mips_fix_adjustable): Make sure we don't adjust extern/weak
        symbols only for ELF.

2001-07-25  Chris Demetriou  <cgd@broadcom.com>

        * config/tc-mips.c: Fix spelling error in comment.

2001-07-25  Dave Brolley  <brolley@redhat.com>

        * app.c (LEX_IS_PARALLEL_SEPARATOR): New macro.
        (IS_PARALLEL_SEPARATOR): New macro.
        (do_scrub_begin): Set up characters in tc_parallel_separator_chars
        as LEX_IS_PARALLEL_SEPARATOR, if it is defined.
        (do_scrub_chars): Handle LEX_PARALLEL_SEPARATOR chars like
        LEX_LINE_SEPARATOR except that we go to state 1 (as if the label has
        been seen).

2001-07-24  Alan Modra  <amodra@bigpond.net.au>

        * Makefile.am (DEP_FLAGS): Define, add -DOBJ_MAYBE_ELF.
        (DEP1, DEPTC, DEPOBJ, DEP2): Use it.
        Update dependencies with "make dep-am".
        * Makefile.in: Regenerate.
        * doc/Makefile.in: Regenerate.

2001-07-23  Kazu Hirata  <kazu@hxi.com>

        * config/tc-alpha.h: Fix formatting.
        * config/tc-arc.c: Likewise.
        * config/tc-d10v.h: Likewise.
        * config/tc-hppa.c: Likewise.
        * config/tc-i370.c: Likewise.
        * config/tc-i386.h: Likewise.
        * config/tc-i960.h: Likewise.
        * config/tc-ia64.c: Likewise.
        * config/tc-ia64.h: Likewise.
        * config/tc-m32r.c: Likewise.
        * config/tc-m68k.c: Likewise.
        * config/tc-m88k.c: Likewise.
        * config/tc-ns32k.c: Likewise.
        * config/tc-pdp11.c: Likewise.
        * config/tc-pj.h: Likewise.
        * config/tc-s390.c: Likewise.
        * config/tc-sparc.c: Likewise.
        * config/tc-sparc.h: Likewise.
        * config/tc-tic80.c: Likewise.
        * config/tc-w65.h: Likewise.

2001-07-23  Alan Modra  <amodra@bigpond.net.au>

        * symbols.c (S_GET_VALUE): Don't treat O_constant and local
        symbols specially.  Always resolve, adding fr_address to value.
        * write.c (write_object_file): Don't add fr_address to sym values.
        (relax_frag): Likewise.
        (relax_segment): Likewise.
        * config/obj-ieee.c (do_symbols): Likewise.
        * config/tc-cris.c (md_convert_frag): Likewise.
        * config/tc-fr30.c (md_convert_frag): Likewise.
        * config/tc-i386.c (md_convert_frag): Likewise.
        * config/tc-m32r.c (md_convert_frag): Likewise.
        * config/tc-m68hc11.c (md_convert_frag): Likewise.
        * config/tc-mcore.c (md_convert_frag): Likewise.
        * config/tc-mips.c (mips16_extended_frag): Likewise.
        * config/tc-ns32k.c (md_convert_frag): Likewise.
        * config/tc-m68k.c (md_convert_frag_1): Likewise.
        (BRANCHBWL, BRABSJUNC, BRABSJCOND, BRANCHBW, FBRANCH, DBCCLBR,
        DBCCABSJ, PCREL1632, PCINDEX, ABSTOPCREL): Decrement.
        (md_relax_table): Remove first four entries.  Format.
        (md_estimate_size_before_relax): Remove old_fix.  Don't bother
        setting fr_var.  Simplify byte branch checks.

2001-07-23  Alan Modra  <amodra@bigpond.net.au>

        * config/tc-hppa.c (pa_parse_nonneg_cmpsub_cmpltr): Remove
        "isbranch" param as all calls have it set.
        (pa_parse_neg_cmpsub_cmpltr): Likewise.
        (pa_parse_nonneg_add_cmpltr): Likewise.  Remember result of
        strcasecmp in "nullify" var.
        (pa_parse_neg_add_cmpltr): Likewise.
        (pa_ip): Don't "save_s" unnecessarily.  Update calls to above
        functions.  Don't print wrong conditions in error messages.

2001-07-23  Andreas Jaeger  <aj@suse.de>

        * config/tc-s390.c (s390_force_relocation): Removed.

        * config/tc-s390.h: Remove double declaration of
        TC_FORCE_RELOCATION.

2001-07-22  H.J. Lu <hjl@gnu.org>

        * config/tc-mips.c (s_mips_end): Remove unused variables.
        (s_mips_frame): Add ATTRIBUTE_UNUSED.

2001-07-17  Andreas Schwab  <schwab@suse.de>

        * config/tc-m68k.c (md_pseudo_table) [OBJ_ELF]: Add .file and
        .loc.
        (md_assemble) [OBJ_ELF]: Call dwarf2_emit_insn before emitting
        insn.
        * config/tc-m68k.h (DWARF2_LINE_MIN_INSN_LENGTH): Define.

2001-07-17  matthew green  <mrg@eterna.com.au>

        * config/tc-i386.c (comment_chars): Don't use '/' as comment start if
        TE_NetBSD.
        (line_comment_chars): Set to '/' if TE_NetBSD.

2001-07-14  matthew green  <mrg@eterna.com.au>

        * configure.in (i386-*-netbsdelf*): New target.
        * configure: Regenerate.

2001-07-10  Mark Elbrecht  <snowball3@softhome.net>

        * config/obj-coff.c (coff_frob_symbol): Don't merge if the storage
        class of the non-debug symbol is C_NULL.

2001-07-10  Anders Norlander <anorland@synergenix.se>

        * doc/as.texinfo (Incbin): Fix grammatical errors.

2001-07-10  Nick Clifton  <nickc@cambridge.redhat.com>

        * depend.c: Use FOPEN_.. macros in calls to fopen().
        * input-file.c: As above.
        * itbl-ops.c: As above.
        * listing.c: As above.
        * output-file.c: As above.
        * read.c: As above.

2001-07-08  Anders Norlander <anorland@synergenix.se>

        * read.c (s_incbin): New .incbin function.
        * read.c (potable): Add "incbin" pseudo-op.
        * read.h: Add s_incbin prototype.
        * doc/as.texinfo (incbin): Document .incbin pseudo-op.
        * NEWS: Mention new feature.

2001-07-07  Nick Clifton  <nickc@cambridge.redhat.com>

        * ecoff.c (add_file): Only set debug_type to DEBUG_NONE if it is
        DEBUG_UNSPECIFIED.

2001-07-06  John Healy  <jhealy@redhat.com>

        * cgen.c (gas_cgen_save_fixups): Modified to allow more than one
        set of fixups to be stored.
        (gas_cgen_restore_fixups): Modified to allow the fixup chain to be
        restored to be chosen from any that are saved.
        (gas_cgen_swap_fixups): Modified to allow the current set of
        fixups to be swapped with any other set that has been saved.
        (gas_cgen_initialize_saved_fixups_array): New routine.
        * cgen.h: Modifed prototypes for gas_cgen_save_fixups,
        gas_cgen_restore_fixups, and gas_cgen_swap_fixups.  Added definitions
        or MAX_SAVED_FIXUP_CHAINS.
        * config/tc-m32r.c (assemble_two_insns): Changed calls to fixup
        store, swap and restore fuctions to reflect the new interface.

2001-07-06  Nick Clifton  <nickc@cambridge.redhat.com>

        * config/tc-m68k.c (md_estimate_size_before_relax): Catch and
        ignore empty, ineffectual alignment frags when deciding if a
        branch can be short.

2001-07-05  Steve Ellcey  <sje@cup.hp.com>

        * config/tc-ia64.c (special_section): Add SPECIAL_SECTION_INIT_ARRAY
        and SPECIAL_SECTION_FINI_ARRAY.
        (special_section_name): Add .init_array and .fini_array.
        (md_pseudo_table): Add init_array and fini_array.
        (md): Add pointer_size and pointer_size_shift fields.
        (setup_unwind_header): New static function.
        (output_unw_records): Modify to use setup_unwind_header.
        (generate_unwind_image, dot_endp): Modify to use md.pointer_size and
        md.pointer_size_shift.
        (md_begin): Initialize md.pointer_size and md.pointer_size_shift.

2001-07-05  Ben Elliston  <bje@redhat.com>

        * README (Supported platforms): m88k no longer suffers bitrot.

        * config/tc-m88k.c (md_pseudo_table): Remove redundant "global".

2001-07-05  Alan Modra  <amodra@bigpond.net.au>

        * struc-symbol.h (struct local_symbol): Rename lsy_offset to
        lsy_value.  Correct typos in comments.
        * symbols.c (local_symbol_make): Update for name change.
        (local_symbol_convert): Likewise.
        (colon): Likewise.
        (S_GET_VALUE): Likewise.
        (S_SET_VALUE): Likewise.
        (print_symbol_value_1): Likewise.
        (resolve_symbol_value): Likewise.  Don't divide local sym values
        by OCTETS_PER_BYTE twice.

2001-07-04  Jim Wilson  <wilson@redhat.com>

        * config/tc-ia64.c (md_pseudo_table): Add 2byte, 4byte, and 8byte.

        * config/tc-ia64.c (is_conditional_branch): Rewrite to exclude mod
        sched branches.

2001-07-05  Ben Elliston  <bje@redhat.com>

        * read.c (s_fill): Correct spelling error in comments.

        * doc/c-m88k.texi: New file.
        * doc/Makefile.am (CPU_DOCS): Add c-m88k.texi.
        * doc/Makefile.in: Regenerate.
        * doc/all.texi: Set M880X0.
        * doc/as.texinfo: Hook in m88k-dependent documentation.

2001-07-04  Eric Christopher  <echristo@redhat.com>

        * doc/c-mips.texi (MIPS Opts): Document 12000 as valid cpu.

        * config/tc-mips.c (mips_cpu_info_table): Add rm5200, rm5231, rm5261,
        and rm5721 as valid cpu strings.
        (md_show_usage): Add rm5200, rm5231, rm5261, rm5721.

2001-07-04  Richard Sandiford  <rsandifo@redhat.com>

        * config/tc-mips.c (md_apply_fix): Prevent addend from becoming zero
        if it's expected to be non-zero.

2001-07-03  Nick Clifton  <nickc@cambridge.redhat.com>

        * config/tc-sh.c (sh_frob_section): Replace symbol_get_frag() with
        fscan->fx_frag.

        * write.c (TC_FINALIZE_SYMS_BEFORE_SIZE_SEG): Default to 1.
        (write_object_file): Set finalize_syms to
        TC_FINALIZE_SYMS_BEFORE_SIZE_SEG just before size_segs is
        called.

        * doc/internals.texi; Document
        TC_FINALIZE_SYMS_BEFORE_SIZE_SEG.

2001-07-02  Alan Modra  <amodra@bigpond.net.au>

        * config/tc-ppc.c: Formatting fixes.

2001-07-01  Ben Elliston  <bje@redhat.com>

        * config/tc-m88k.c: Back out warning fixes from 2001-06-24, as
        they cause some subtle breakage.  Will fix them again later.

2001-06-28  Nick Clifton  <nickc@cambridge.redhat.com>

        * config/obj-coff.c (obj_coff_ln): Treat a .ln directive
        outside of a function as a .appline directive.

2001-06-28  Eric Christopher <echristo@redhat.com>
            H.J. Lu  <hjl@gnu.org>

        * config/tc-mips.c (mips_arch): New. Use mips_arch instead
        of mips_cpu for the ISA selection.
        (md_longopts): Add OPTION_MARCH and OPTION_MTUNE.
        (md_parse_option): Handle OPTION_MARCH and OPTION_MTUNE.
        (mips_tune): New.  Use mips_tune for scheduling and optimization
        issues.
        (append_insn): Use mips_tune and mips_arch.
        (macro_build): Ditto.
        (mips_ip): Ditto.
        (md_begin): Handle mips_arch, mips_tune and mips_cpu.  For
        backwards compatability mips_cpu generates arch and tune.
        (md_show_usage): Document new behavior.

        * doc/c-mips.texi (MIPS Opts): Document -march and -mtune.
        Deprecate -mcpu.

        * NEWS: Update.

2001-06-27  Nick Clifton  <nickc@cambridge.redhat.com>

        * write.c (write_object_file): Do not set finalize_syms until
        after the segments have been sized.  Some backends may still
        need to access the syms's frags in order to adjust relaxed
        frags.

        * config/tc-arm.c (do_ldst): Use MVN to build simple inverted
        constants.

2001-06-27  Alan Modra  <amodra@bigpond.net.au>

        * write.c (fixup_segment <Difference of 2 syms same seg>): Don't
        subtract MD_PCREL_FROM_SECTION for 68k.
        (fixup_segment <Difference of 2 syms different seg>): Only fudge
        by adding MD_PCREL_FROM_SECTION for 68k or if not already pcrel.

2001-06-27  Tracy A. Kuhrt  <Tracy.Kuhrt@microchip.com>

        * write.c (fixup_segment <Difference of 2 syms same seg>): If
        pcrel, subtract MD_PCREL_FROM_SECTION value.

2001-06-24  Ben Elliston  <bje@redhat.com>

        * stabs.c (generate_asm_file): Make local variable `len' a size_t.

2001-06-24  Jakub Jelinek  <jakub@redhat.com>

        * config/tc-alpha.c (tc_gen_reloc): Handle relocs against SEC_MERGE
        section symbols the same way as externs.

2001-06-24  Ben Elliston  <bje@redhat.com>

        * config/tc-m88k.c (md_number_to_imm): Remove; unused since 1993.
        (emit_relocations): Ditto.
        (s_bss): Ditto.
        (md_begin): Reformat comments to conform to the GNU standards.
        (md_assemble): Ditto.

        * config/tc-m88k.c (get_reg): Adjust type of `reg_prefix' to char.
        (md_parse_option): Mark parameters as unused.
        (md_show_usage): Ditto.
        (calcop): Adjust type of `reg_prefix' to char.
        (get_reg): Ditto.
        (getval): Adjust type of local `c' to char.
        (md_create_short_jump): Mark from_addr, to_addr params as unused.
        (md_create_long_jump): Ditto.
        (md_estimate_size_before_relax): Mark parameters as unused.

        * config/tc-m88k.c (md_pseudo_table): Properly terminate the table
        to allay a possible compiler warning.

2001-06-22  Nick Clifton  <nickc@cambridge.redhat.com>

        * doc/internals.texi (CPU backend): Document md_atof.

2001-06-22  Matthew Wilcox  <willy@ldl.fc.hp.com>

        * config/tc-hppa.c (pre_defined_registers): Add %mrp (millicode
        return pointer) alias for %r2 or %r31, depending on 32 or 64 bit
        architecture.

2001-06-21  Philip Blundell  <philb@gnu.org>

        * config/tc-arm.c (cplong_flag): Rename to long_flag.  All uses
        updated.
        (insns): Remove entry for adrl.  Add long_flag for adr.
        (do_adr): Handle `l' suffix.
        (do_adrl): Delete.

2001-06-21  Alan Modra  <amodra@bigpond.net.au>

        * config/tc-hppa.c (CHECK_FIELD_WHERE): Define.
        (md_apply_fix): Use it here.  Replace printf with equivalent
        as_bad_where.
        (tc_gen_reloc): Use as_bad_where instead of as_bad.
        (md_apply_fix): Here too.
        * config/tc-i386.c (tc_gen_reloc): Use as_bad_where instead of as_bad.
        * config/tc-m68k.c (tc_gen_reloc): Likewise.
        (md_convert_frag_1): Likewise.

2000-06-20  Tom Rix <trix@redhat.com>

        * config/tc-ppc.c (ppc_comm): Change default alignment to 4 bytes.

2001-06-18  H.J. Lu <hjl@gnu.org>

        * doc/Makefile.am (info): Depend on $(MANS).
        (as.1): Remove the prefix `$(srcdir)/'.
        * doc/Makefile.in: Regenerated.

        * as.1: Removed.

2001-06-18  Philip Blundell  <philb@gnu.org>

        * config/tc-arm.c (do_msr): Remove restriction on usage of
        immediate operands.

2001-06-19  Alan Modra  <amodra@bigpond.net.au>

        * dwarf2dbg.c (dwarf2_finish): Output file info even when no
        line info.

2001-06-13  Philip Blundell  <philb@gnu.org>

        * config/tc-arm.c (thumb_shift): Improve wording of error message.
        (do_t_arit): Likewise.

2001-06-13  Nick Clifton  <nickc@cambridge.redhat.com>

        * config/tc-sh.c (md_pseudo_table): Only intercept the .file and
        .loc pseudos if the dfwarf2 functions are available.
        (md_assemble): Only call dwarf2_emit_insn if it is available.

        * expr.c: Fix typo in comment.

2001-06-12  Nick Clifton  <nickc@cambridge.redhat.com>

        * doc/as.texinfo (Infix Ops): Document that comparison and
        combiner operators can be used as infix operators.

2001-06-12  Peter Jakubek <pjak@snafu.de>

        * config/tc-m68k.c (parse_mri_control_operand): Fix handling
        of AND/OR.
        (swap_mri_condition): Add HS (alias fo CC) and LO (alias for CS).
        (reverse_mri_condition): Likewise.
        (swap_mri_condition): Issue warning for conditions that can not be
        swapped.
        (build_mri_control_operand): Fix order of operands (swapped).
        (build_mri_control_operand): Allow upper case extension in structured
        control directives.
        (s_mri_else): Likewise.
        (s_mri_next): Likewise.
        (s_mri_for): Likewise.
        (s_mri_if): Fix handling comment ('*') in mri mode.
        (s_mri_while): Likewise.
        * macro.c (macro_expand): Allow macro invocation with empty
        extension.

2001-06-12  Nick Clifton  <nickc@cambridge.redhat.com>

        * config/tc-arm.c: Fix test for overlow of literal pool.

2001-06-11  H.J. Lu  <hjl@gnu.org>

        * NEWS: Updated for the new -n option for the MIPS assembler.

        * config/tc-mips.c (md_show_usage): Add -n.

        * doc/as.texinfo: Document the new -n option.
        * doc/c-mips.texi: Likewise.
        * doc/as.1: Regenerated.

2001-06-10  Alan Modra  <amodra@bigpond.net.au>

        * config/obj-coff.c (obj_coff_section): Formatting fix.

        * config/tc-i386.c (md_assemble): Accept branch hints as ",pt" and
        ",pn".

2001-06-08  H.J. Lu  <hjl@gnu.org>

        * config/tc-mips.c (warn_nops): New variable. Set to 0 to
        disable warning about all NOPS that the assembler generates.
        (macro): Warn NOPS generated only if warn_nops is not 0.
        (md_shortopts): Add `n'.
        (md_parse_option): Set warn_nops to 1 for `n'.

2001-06-08  H.J. Lu  <hjl@gnu.org>

        * config/tc-mips.c (mips_ip): Properly handle illegal operands.

2001-06-08  H.J. Lu  <hjl@gnu.org>

        * config/tc-mips.c (md_apply_fix): Don't adjust common
        extern/weak symbols for ELF.
        (md_estimate_size_before_relax): Treat weak like extern for
        ELF.
        (mips_fix_adjustable): Don't adjust extern/weak symbols for
        ELF.

2001-06-08  Alan Modra  <amodra@bigpond.net.au>

        * Makefile.am: 'som' is not wrongly spelled 'some'.
        * Makefile.in: Regenerate.

        * config/tc-mips.c (mips16_mark_labels): Reduce number of calls to
        S_GET_VALUE by using a temp.
        (append_insn): Likewise, and for S_SET_VALUE too.
        (mips_emit_delays): Likewise.
        (my_getExpression): Likewise.
        (md_apply_fix): Likewise.  Use "valueT" rather than "long" for "value".
        (mips16_extended_frag): Remove code concerned with avoiding
        locking in a frag address now that symbols are not finalized until
        relaxation is complete.  Cater for first relaxation pass having
        bogus addresses.  Use relax_marker to reliably determine whether a
        symbol frag has been reached on the current pass.

2001-06-07  H.J. Lu  <hjl@gnu.org>

        * configure.in: Move "mips-*-linux-gnu*" before "mips-*-gnu*".
        * configure: Regenerate.

2001-06-07  H.J. Lu  <hjl@gnu.org>

        * configure.in: Use MIPS_STABS_ELF for Linux/mips and remove
        ecoff emulation.
        * configure: Regenerate.

2001-06-07  H.J. Lu  <hjl@gnu.org>

        * config/tc-mips.c (mips_pseudo_table): Add "extern" if
        MIPS_STABS_ELF is defined.

2001-06-06  Nick Clifton  <nickc@cambridge.redhat.com>

        * as.c (show_usage): Remove L from listing options.  It is not a
        generic option.

2001-06-06  Christian Groessler <cpg@aladdin.de>

        * config/tc-z8k.c: Removed many warnings by removing unused
        variables and tagging unused parameters as such.
        (md_begin): Fixed a typo (","instead of ";").
        (struct ctrl_table): Add parentheses to initialize array
        correctly.
        (struct flag_table): Likewise.
        (struct intr_table): Likewise.
        (struct table): Likewise.
        (check_operand): "#if 0"'ed since it doesn't seem to be used.

2001-06-06  Peter Jakubek <pjak@snafu.de>

        * config/tc-m68k.c (md_show_usage): Add all supported ColdFire
        options to list (e.g. m5206e, m5307, m5407).

2001-06-06  Martin Schwidefsky <schwidefsky@de.ibm.com>

        * config/tc-s390.h (TC_FORCE_RELOCATION): Always emit relocations
        BFD_RELOC_VTABLE_INHERIT and BFD_RELOC_VTABLE_ENTRY.

2001-06-06  Alan Modra  <amodra@bigpond.net.au>

        * config/tc-i386.c (md_assemble): Handle Pentium4 branch hints.
        <JumpByte, JumpDword insn output>: Remove dead code.

2001-06-06  Tracy Kuhrt <Tracy.Kuhrt@microchip.com>

        * as.c (parse_args): Correct option name "listing-lhs-width2".

2001-06-05  Nick Clifton  <nickc@cambridge.redhat.com>

        * symbols.c (S_SET_EXTERNAL): Do not override a section symbol's
        status.

2001-05-30  Richard Henderson  <rth@redhat.com>

        * read.c (emit_leb128_expr): Call md_cons_align.

2001-05-28  Jeff Sturm  <jsturm@one-point.com>

        * config/tc-sparc.c (md_apply_fix3): Handle BFD_RELOC_SPARC_UA16,
        BFD_RELOC_SPARC_UA32 and BFD_RELOC_SPARC_UA64.
        (tc_gen_reloc): Likewise.
        (sparc_cons_align): Don't clear sparc_no_align_cons.
        (cons_fix_new_sparc): Substitute BFD_RELOC_SPARC_UA{16|32|64} for
        BFD_RELOC_{16|32|64} iff sparc_no_align_cons is set.

2001-05-27  Alan Modra  <amodra@one.net.au>

        * write.c (relax_segment <rs_space>): Check the section of a
        symbol to determine whether it is absolute rather than comparing
        its frag against zero_address_frag as listings play tricks with
        frags.

        * config/tc-m68k.c (md_assemble): Ensure variable part of frag is
        allocated in the same chunk as the fixed part.

2001-05-26  Alan Modra  <amodra@one.net.au>

        * write.c (relax_segment <rs_space>): Calculate growth using
        addresses before stretch.  Prevent repeated error messages.
        From Peter Jakubek  <pjak@snafu.de>
        Use as_bad_where and as_warn_where to pinpoint errors.

2001-05-25  Alan Modra  <amodra@one.net.au>

        * symbols.c (resolve_symbol_value): Always set segment, even when
        not finalizing symbol value.

        * config/obj-ieee.c (write_object_file): Set finalize_syms.
        * config/obj-coff.c (write_object_file): Likewise.
        * (size_section): Remove rs_space assert as fr_symbol is no longer
        removed.
        (fill_section): Likewise.

        * configure.in: Replace linuxoldld with linux*oldld.
        * configure: Regenerate.

        From 2.11 branch 2001-03-30  Richard Henderson  <rth@redhat.com>
        * config/tc-i386.c (md_convert_frag): Don't die on local symbols
        that have been finalized.

        * symbols.c (resolve_symbol_value): Clear sy_resolving before
        taking exit_dont_set_value.

        * write.c (relax_segment <rs_space>): Don't zap fr_symbol when
        relaxing.

2000-05-24  Tom Rix <trix@redhat.com>

        * config/obj-coff.c (add_lineno): xcoff allows negative line
        numbers
        * config/tc-ppc.c (ppc_stabx): fix generated symbol

2001-05-24  Alan Modra  <amodra@one.net.au>

        * write.c (write_object_file): Set finalize_syms = 1 before
        size_seg is called.

2001-05-23  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>

        * config/tc-mips.c (ISA_HAS_64BIT_REGS): Add ISA_MIPS64 as 64 bit
        architecture, remove erraneous ISA_MIPS32.
        (md_show_usage): Add MIPS r12k support.
        (mips_cpu_info_table): Add MIPS r12k support.

2001-05-22  Alan Modra  <amodra@one.net.au>

        * config/tc-arc.c (md_assemble): Use is_end_of_line instead of
        testing for NULs.

        * symbols.c (resolve_symbol_value): Remove "finalize" param,
        instead use finalize_syms directly.  Don't treat expressions
        specially with regard to finalize_syms.  Update calls to self.
        (resolve_local_symbol): Update call to resolve_symbol_value.
        (S_GET_VALUE): Likewise.  Return resolve_symbol_value if
        !finalize_syms.
        * symbols.h (resolve_symbol_value): Update prototype.
        * config/obj-aout.c (obj_crawl_symbol_chain): Update call
        to resolve_symbol_value.
        * config/obj-bout.c (obj_crawl_symbol_chain): Likewise.
        * config/obj-coff.c (do_relocs_for): Likewise.
        (yank_symbols): Likewise.
        (fixup_segment): Likewise.
        * config/obj-vms.c (obj_crawl_symbol_chain): Likewise.
        * config/tc-mips.c (md_convert_frag): Likewise.
        * config/tc-ppc.c (ppc_frob_symbol): Likewise.
        (ppc_fix_adjustable): Likewise.
        * dwarf2dbg.c (dwarf2dbg_estimate_size_before_relax): Likewise.
        (dwarf2dbg_convert_frag): Likewise.
        * ehopt.c (eh_frame_estimate_size_before_relax): Likewise.
        (eh_frame_convert_frag): Likewise.
        * expr.c (make_expr_symbol): Likewise.
        * write.c (adjust_reloc_syms): Likewise.
        (write_object_file): Likewise.
        (relax_segment): Likewise.
        (fixup_segment): Likewise.
        (finalize_syms): Init to zero, and update comment.
        (write_object_file): Set finalize_syms to 1 rather than 2.
        * doc/internals.texi (sy_value): Mention finalize_syms.
        (S_GET_VALUE): Remove restriction on when S_GET_VALUE can be called.

        * config/tc-m68k.c (relaxable_symbol): Only treat external symbols
        as relaxable if embedded system, make weak syms non-relaxable.
        Move definition..
        (tc_m68k_fix_adjustable): ..so it can be used here.
        (md_apply_fix_2): Sign extend without conditional.

        * config/tc-v850.c: Update copyright.

2001-05-16  Jeff Johnston  <jjohnstn@redhat.com>

        * cgen.c (gas_cgen_tc_gen_reloc): Changed error message when
        howto entry is not found.

2001-05-15  Alexandre Oliva  <aoliva@redhat.com>

        * config/tc-mn10300.c (mn10300_force_relocation): Don't
        optimize differences between symbols in code sections to
        constants.
        (mn10300_fix_adjustable): Don't adjust to section+offset
        relocations pointing at symbols in code sections.

2001-05-16  Alan Modra  <amodra@one.net.au>

        * config/tc-arc.c (md_assemble): Correct dwarf2_emit_insn param
        for 8 byte insns.
        * config/tc-i386.c (md_assemble): Call dwarf2_emit_insn before
        opcodes are output rather than after.  Delete insn_size.
        * config/tc-v850.c (md_assemble): Similarly, but delete
        total_insn_size.

2001-05-14  Richard Henderson  <rth@redhat.com>

        * ehopt.c (eh_frame_convert_frag): Fix missed subtype adjustment
        last change.

2001-05-14  Richard Henderson  <rth@redhat.com>

        * ehopt.c (get_cie_info): Rename from eh_frame_code_alignment;
        also collect whether to expect an FDE augmentation.
        (check_eh_frame): Rewrite as a state machine.  Track where in
        an FDE we are located, skip any augmentation.
        (eh_frame_estimate_size_before_relax): Get code alignment from
        the fragment subtype.
        (eh_frame_relax_frag, eh_frame_convert_frag): Likewise.
        * read.c (emit_leb128_expr): Call check_eh_frame.

2001-05-14  Alexandre Oliva  <aoliva@redhat.com>

        * config/tc-mn10300.c (md_assemble): Anchor dwarf2 line info
        before a relaxable insns.

2001-05-13  Alexandre Oliva  <aoliva@redhat.com>

        * config/tc-mn10300.c (tc_gen_reloc): Don't reject differences
        between symbols if the base symbol is in the current section;
        emit a PC-relative relocation instead.

2001-05-12  Peter Targett  <peter.targett@arccores.com>

        * config/tc-arc.c: Update copyright and tidy source comments.
        (md_pseudo_table): Add directive .cpu back as an alias for
        .option.  Add .file and .line for dwarf2 support.
        (arc_mach_type): Make bfd_mach_arc_6 default.
        (md_longopts): Add entry 'pre-v6' representing old command line
        option when assembling for 'arc5' core versions.
        (md_parse_option): Make OPTION_ARC same as OPTION_ARC6, for new
        default behaviour.
        (arc_code_symbol): Make symbol value for @h30 fixup expression
        equal to O_constant.
        (md_assemble): Call dwarf2_emit_insn.
        Include "dwarf2dbg2.h".  Formatting fixes throughout file.
        * config/tc-arc.h (DWARF2_LINE_MIN_INSN_LENGTH): Define.
        * doc/c-arc.texi (ARC_CORE_DEFAULT): Update to new default.

2001-05-11  Jakub Jelinek  <jakub@redhat.com>

        * config/tc-ia64.c (special_linkonce_name): New.
        (make_unw_section): Map .gnu.linkonce.t.FOO text section into
        .gnu.linkonce.ia64unw{,i}.FOO.
        (ia64_elf_section_type): Handle .gnu.linkonce.ia64unw{,i}.FOO.
        (dot_endp): Add comment about it.

2001-05-11  Nick Clifton  <nickc@cambridge.redhat.com>

        * config/tc-arm.c (arm_handle_align): When truncating an aligned
        block, ensure that the low order bits of the alignment are
        preserved.

2001-05-10  Alan Modra  <amodra@one.net.au>

        * config/obj-vms.c (obj_crawl_symbol_chain): Don't take address of
        symbol_next.

        * config/tc-fr30.c (md_estimate_size_before_relax): Return size of
        current variable part of frag.
        * config/tc-m32r.c (md_estimate_size_before_relax): Likewise.
        * config/tc-openrisc.c (md_estimate_size_before_relax): Likewise.
        * config/tc-m68hc11.c (RELAX_STATE): Define.
        (RELAX_LENGTH): Define.
        (md_estimate_size_before_relax): Handle non-relaxable cases
        separately from relaxable cases for clarity, and return correct
        size for multi-pass relaxation.
        * config/tc-tahoe.c (RELAX_LENGTH): Correct.
        (md_estimate_size_before_relax): As for tc-m68hc11.c.
        (md_convert_frag): Remove "length_code".
        * config/tc-vax.c (RELAX_STATE): Define.
        (RELAX_LENGTH): Define.
        (md_relax_table): Add missing entry.
        (md_estimate_size_before_relax): As for tc-m68hc11.c.
        (md_convert_frag): Remove "length_code".
        * config/tc-ns32k.c (md_estimate_size_before_relax): Simplify and
        don't bother setting fr_var.  Return correct size for multi-pass
        relaxation.
        * config/tc-v850.c (md_estimate_size_before_relax): Rewrite.
        (md_convert_frag): Don't bother clearing fr_var.
        (md_pseudo_table): Correct initialization.
        * config/tc-h8500.c (md_convert_frag): Don't bother clearing fr_var.
        (md_estimate_size_before_relax): No need to set fr_var.
        * config/tc-mcore.c (md_convert_frag): Don't bother clearing fr_var.
        (md_estimate_size_before_relax): No need to set fr_var.

2001-05-09  Richard Henderson  <rth@redhat.com>

        * config/tc-ia64.c (generate_unwind_image): Align the fragment
        beginning a function's unwind info block.

2001-05-09  Alexandre Oliva  <aoliva@redhat.com>

        * config/tc-mn10300.c (md_apply_fix3): Accept PC-relative relocs.

2001-05-08  Andreas Schwab  <schwab@suse.de>

        * config/tc-m68k.c: Instead of replacing -1 by 64 in assignment to
        fx_pcrel_adjust explicitly sign extend when reading it.

2001-05-08  Alan Modra  <amodra@one.net.au>

        * config/tc-m68k.c (md_estimate_size_before_relax): Set fr_var
        from md_relax_table, and combine some switch cases.

2001-05-06  Alexandre Oliva  <aoliva@redhat.com>

        * config/tc-mn10300.c (md_assemble): Subtract operand->shift
        from offset in non-pcrel operands too.

2001-05-06  Nick Clifton  <nickc@cambridge.redhat.com>

        * config/tc-arm.h (MAX_MEM_FOR_RS_ALIGN_CODE): Define.
        * config/tc-arm.c (arm_handle_align): Do not insert more than
        MAX_MEM_FOR_RS_ALIGN_CODE bytes.
        (arm_frag_align_code): Use MAX_MEM_FOR_RS_ALIGN_CODE.

2001-05-03  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>

        * Makefile.am (TARG_ENV_HFILES): Add te-hppa64.h and te-hppalinux64.h.
        Run "make dep-am".
        * Makefile.in: Regenerate.
        * configure.in: Remove duplicate mips-*-ecoff* entry.
        * configure: Regenerate.

        * config/obj-ecoff.c (obj_pseudo_table): Fix terminating entry.
        (n_names): Cast away type mismatch.
        (ecoff_sec_sym_ok_for_reloc): Add unused attribute.
        (obj_ecoff_frob_symbol): Likewise.
        * ecoff.c: (add_file): Add unused attribute.
        (ecoff_directive_begin): Likewise.
        (ecoff_directive_bend): Likewise.
        (ecoff_directive_def): Likewise.
        (ecoff_directive_dim): Likewise.
        (ecoff_directive_scl): Likewise.
        (ecoff_directive_size): Likewise.
        (ecoff_directive_type): Likewise.
        (ecoff_directive_tag): Likewise.
        (ecoff_directive_val): Likewise.
        (ecoff_directive_endef): Likewise.
        (ecoff_directive_end): Likewise.
        (ecoff_directive_ent): Likewise.
        (ecoff_directive_extern): Likewise.
        (ecoff_directive_file): Likewise.
        (ecoff_directive_fmask): Likewise.
        (ecoff_directive_frame): Likewise.
        (ecoff_directive_mask): Likewise.
        (ecoff_directive_loc): Likewise.
        (mark_stabs): Likewise.
        (ecoff_stab):  Likewise.
        (ecoff_frob_symbol): Cast away type mismatch.
        (ecoff_padding_adjust): Likewise.
        (ecoff_build_symbols): Likewise.
        (ecoff_build_procs): Likewise.
        (ecoff_build_aux): Likewise.
        (ecoff_build_strings): Likewise.
        (ecoff_build_fdr): Likewise.
        (ecoff_build_debug): Likewise.
        * itbl-ops.c (itbl_assemble): Variable initialization.

2001-05-03  Alan Modra  <amodra@one.net.au>

        * config/tc-i386.c (i386_displacement): Call as_bad for bad GOTOFF
        expressions rather than triggering an assert.

2001-05-02  Johan Rydberg  <jrydberg@opencores.org>

        * config/tc-openrisc.c: New file.
        * config/tc-openrisc.h: Likewise.

        * Makefile.am: Add OpenRISC target.
        * Makefile.in: Regenerated.

        * configure.in (openrisc-*-*): Add target.
        * configure: Regenerated.

2001-05-02  Nick Clifton  <nickc@cambridge.redhat.com>

        * config/tc-arm.c (arm_frag_align_code): Change error message to
        more explanatory version.

2001-04-29  Keith M Wesolowski <wesolows@foobazco.org>

        * config/tc-mips.c (md_parse_option): Also accept
        elf64-tradbigmips and elf64-tradlittlemips for OPTION_64.

2001-04-27  David Mosberger  <davidm@hpl.hp.com>

        * config/tc-ia64.c (dot_spillmem_p): Fix output_spill_?sprel_p()
        argument passing order: predicate goes last, not first.

2001-04-27  Sean McNeil <sean@mcneil.com>

        * configure.in: Add arm-vxworks.
        * configure: Regenerate.

2001-04-26  Nick Clifton  <nickc@cambridge.redhat.com>

        * config/tc-arm.c (arm_handle_align): New Function:  Generate
        no-op filled alignment frags.
        (arm_frag_align_code): New Function: Create a code alignment frag.
        (arm_init_frag): New Function: Initialse the target dependent
        parts of a frag.

        * config/tc-arm.h (TC_FRAG_TYPE): Define.
        (TC_FRAG_INIT): Define.
        (HANDLE_ALIGN): Define.
        (md_do_align): Define.

2001-04-25  Nick Clifton  <nickc@cambridge.redhat.com>

        * config/obj-coff.c (do_linenos_for): Check to see if the filename
        symbol has been initialised before extracting its symbol index.

2001-04-24  H.J. Lu  <hjl@gnu.org>

        * configure: Regenerated with the right version of autoconf.

2001-04-24  Christian Groessler  <cpg@aladdin.de>

        * config/tc-z8k.c (build_bytes): 12 and 16 bit displacements now
        generate R_CALLR and R_REL16 relocations

2000-04-20  Jason Eckhardt  <jle@redhat.com>

        * config/tc-d10v.h (tc_frob_label): Update the symbol's frag
        since frag_now can change after d10v_cleanup is called.

2001-04-16  David O'Brien  <obrien@FreeBSD.org>

        * configure.in: Add the em type for FreeBSD targets.
        * configure: Regenerate.

2001-04-14  Alexandre Oliva  <aoliva@redhat.com>

        * struc-symbol.h (struct local_symbol): New TC_LOCAL_SYMFIELD_TYPE.
        * symbols.c (local_symbol_convert): Call TC_LOCAL_SYMFIELD_CONVERT.

        * config/tc-mn10300.c (md_assemble): Simplify offset adjustment of
        pc-relative relocations not placed at the end of the instruction.

2001-04-13  Jim Wilson  <wilson@redhat.com>

        * tc-ia64.c (is_conditional_branch): Return true for br, brl, and br.
        excluding br.i.

2001-04-13  Jakub Jelinek  <jakub@redhat.com>

        * config/obj-elf.c (obj_elf_change_section): Add entsize argument,
        handle SHF_MERGE and SHF_STRINGS.
        (obj_elf_parse_section_letters): Set SHF_MERGE and SHF_STRINGS.
        (obj_elf_section): Allow additional argument specifying entity size.
        * write.c (adjust_reloc_syms): Keep relocations against local symbols
        in SEC_MERGE sections.

2001-04-12  Jason Merrill  <jason_merrill@redhat.com>

        * dwarf2dbg.c (process_entries): Don't optimize redundant line notes.

2001-04-12  Alexandre Oliva  <aoliva@redhat.com>

        * expr.c (operand): Pass &c to md_parse_name().
        * config/tc-ia64.h, config/tc-ppc.h, config/tc-tic54x.h: Adjust.

2001-04-07  Steven J. Hill  <sjhill@cotw.com>

        * config/tc-mips.c: Support ELF64 for traditional MIPS targets.

        * Makefile.am: (TARG_ENV_HFILES): Add tc-mips.h.
        * Makefile.in: Regenerated.

        * configure.in: Use traditional MIPS targets for Linux/MIPS.
        * configure: Regenerated.

2001-04-06  Alexandre Oliva  <aoliva@redhat.com>

        * config/tc-mn10300.c (xr_registers): Added `pc'.

2001-04-05  Alan Modra  <alan@linuxcare.com.au>

        * configure.in: Add h8500-*-coff and h8500-*-rtems targets.
        * configure: Regenerate.

        * config/tc-h8500.c (md_estimate_size_before_relax): Add missing
        cases, and always return size based on current fr_subtype.
        (md_begin): Move initialization of md_relax_table..
        (md_relax_table): ..to static initializer.  Set rlx_length for
        UNDEF_WORD_DISP cases.
        * config/tc-w65.c (md_estimate_size_before_relax): Likewise.
        (md_begin): Likewise.
        (md_relax_table): Likewise.
        * config/tc-mcore.c (md_estimate_size_before_relax): Likewise.
        (md_relax_table): Set rlx_length for UNDEF_WORD_DISP cases.
        Set rlx_backward and rlx_forward to zero for unused states.
        * config/tc-sh.c (md_estimate_size_before_relax): Likewise.
        (md_relax_table): Set rlx_length for UNDEF_WORD_DISP cases.
        (UNCOND12, UNCOND32): Remove duplicate defines.

2001-04-04  Hans-Peter Nilsson  <hp@axis.com>

        * config/tc-cris.c (md_estimate_size_before_relax) <case
        ENCODE_RELAX (STATE_CONDITIONAL_BRANCH, STATE_UNDF)>: Don't emit
        32-bit branch, just set fragP->fr_subtype.  Set fragP->fr_var.
        <all cases>: Always set fragP->fr_var using md_cris_relax_table.
        Add cases to cover all relax states.
        (cris_insn_first_word_frag): New.
        (md_assemble): Call cris_insn_first_word_frag to get the first
        frag in an insn, not frag_more.  Don't call dwarf2_emit_insn at
        end.  Drop variable insn_size.
        (gen_bdap): Call cris_insn_first_word_frag, not frag_more.
        (cris_sym_leading_underscore): Wrap first as_bad parameter in _().
        (cris_sym_no_leading_underscore, s_cris_file, s_cris_loc): Ditto.

        * write.c (write_object_file): Reset broken word state before
        calling relax_seg.

2001-03-31  Alan Modra  <alan@linuxcare.com.au>

        * listing.c (listing_listing): Enable listing on EDICT_NOLIST_NEXT
        for one line if not already enabled.
        * cond.c (s_elseif): Correct conditional assembly listing.
        (s_else): Likewise.

        * cond.c (s_endif): Correct handling of "if .. elseif .." trees.
        Don't abort on NULL current_cframe.

2001-03-30  Alan Modra  <alan@linuxcare.com.au>

        * dwarf2dbg.c (dwarf2_directive_file): Fix warnings.
        (dwarf2dbg_convert_frag): Pass `finalize_syms' to resolve_symbol_value.
        * config/obj-aout.c (obj_crawl_symbol_chain): Likewise.
        * config/obj-bout.c (obj_crawl_symbol_chain): Likewise.
        * config/obj-coff.c (do_relocs_for): Likewise.
        (yank_symbols): Likewise.
        (fixup_segment): Likewise.
        * config/tc-ppc.c (ppc_frob_symbol): Likewise.
        (ppc_fix_adjustable): Likewise.
        * config/tc-mips.c (md_convert_frag): Likewise.
        * config/obj-vms.c (obj_crawl_symbol_chain): Likewise.
        * ehopt.c (eh_frame_convert_frag): Likewise.
        * expr.c (make_expr_symbol): Likewise.

        * frags.h (struct frag): Add last_fr_address.  Reorder fields for
        better packing.
        * symbols.c (resolve_symbol_value): Don't fix expression values
        until relaxation is complete.
        (resolve_local_symbol): Pass `finalize_syms' to resolve_symbol_value.
        (S_GET_VALUE): Likewise, and return unresolved expression value.
        * write.c (finalize_syms): New.
        (relax_and_size_seg): Split into..
        (relax_seg): New function, returns 1 if anything changed..
        (size_seg): And the remainder of relax_and_size_seg.
        (fixup_segment): Arrange for final resolution of sym values.
        (adjust_reloc_syms): Likewise.
        (write_object_file): Likewise, and repeatedly call relax_seg until
        nothing more changes.
        (relax_segment): Return 1 if anything changed.  Use correct types
        for rs_org `target' and `after'.
        * write.h (finalize_syms): Declare.
        (relax_segment): Update prototype.

        * config/tc-sh.c (md_estimate_size_before_relax): Add extra
        do-nothing cases to switch to avoid abort on a second relaxation
        pass, and tidy code a little.
        * config/tc-cris.c (md_estimate_size_before_relax): Likewise.
        * config/tc-h8500.c (md_estimate_size_before_relax): Likewise.
        * config/tc-w65.c (md_estimate_size_before_relax): Likewise.
        * config/tc-i386.c (UNCOND_JUMP, COND_JUMP, COND_JUMP86): Decrement.
        (md_relax_table): Remove first four unused entries.  Increment
        rlx_length by one throughout table, and update comments to suit.
        (md_estimate_size_before_relax): Return size of current variable
        part of frag to reflect reality when relaxing more than once.
        * config/tc-mcore.c (COND12, UNCD12): Rename to DISP12 throughout.
        (COND32, UNCD32): Rename to DISP32 throughout.
        (UNDEF_WORD_DISP): Renumber to 3.
        (md_estimate_size_before_relax): Add extra do-nothing cases.
        * config/tc-mn10200.c (md_estimate_size_before_relax): Rewrite.
        * config/tc-mn10300.c (md_estimate_size_before_relax): Rewrite.
        * config/tc-ns32k.c (md_estimate_size_before_relax): Add cases to
        handle word and dword branches.

2001-03-29  Hans-Peter Nilsson  <hp@axis.com>

        * config/tc-cris.h (tc_fix_adjustable): Allow only
        BFD_RELOC_CRIS_32_GOTREL of the PIC relocs.
        * config/tc-cris.c (cris_get_pic_suffix): Correct reloc type in
        example in comment to valid type.

2001-03-28  H.J. Lu  <hjl@gnu.org>

        * read.c (equals): Set to local for COFF only if it hasn't been
        defined before.

2001-03-28  Alan Modra  <alan@linuxcare.com.au>

        * config/tc-hppa.c (DEFAULT_LEVEL): Define.
        (md_begin): Use it when setting default architecture.

2001-03-27  Nick Papadonis  <nick@coelacanth.com>

        * read.c (equals): (for COFF) default symbols to being local.

2001-03-27  Hans-Peter Nilsson  <hp@axis.com>

        * configure.in (cris-*-*): Change default emulation to criself.
        (cris-*-*aout*): New rule.
        * configure: Regenerate.

2001-03-26  Martin Schwidefsky  <schwidefsky@de.ibm.com>

        * config/tc-s390.c (tc_s390_fix_adjustable): Add test for
        BFD_RELOC_390_GOTENT.
        * config/tc-s390.h (TC_RELOC_RTSYM_LOC_FIXUP): Add test for
        BFD_RELOC_390_GOTENT.

2001-03-26  Nick Clifton  <nickc@redhat.com>

        * config/tc-s390.h (TC_FORCE_RELOCATION): Define.
        * config/tc-s390.c (s390_force_relocation): New function: Force
        relocations for VTINHERIT relocs.

2001-03-23  Stephane Carrez  <Stephane.Carrez@worldnet.fr>

        * doc/as.texinfo: Put @c man begin to generate the as man page.
        When generating man, define all the variables. Re-organize some
        options to obtain better indentation of man page.
        * doc/Makefile.am (MANCONF, TEXI2POD, POD2MAN): New variable.
        (as.1): Build from as.texinfo.
        * doc/Makefile.in: Regenerate.Index: binutils/Makefile.am

2001-03-25  Alan Modra  <alan@linuxcare.com.au>

        * config/tc-i386.c (i386_scale): Accept an absolute expression for
        scale factor, and return the end of the expression.
        (i386_operand): Modify for above.

2001-03-23  Nick Clifton  <nickc@redhat.com>

        * doc/as.texinfo: Document --listing-XXX command line switches.
        Explain why listings behave differently when -pipe is used.

2001-03-23  Richard Sandiford  <rsandifo@redhat.com>

        * write.c (fix_new_exp): Print an error if passed a register.

2001-03-23  Hans-Peter Nilsson  <hp@axis.com>

        * config/tc-cris.c: Tweak attribution.  Fix typos.  PIC support.
        (PIC_SUFFIX_CHAR): New macro.
        (cris_get_pic_suffix, cris_get_pic_reloc_size): New functions.
        (pic): New variable.
        (md_longopts): New option --pic.
        (OPTION_PIC): Define.
        (md_estimate_size_before_relax): Tweak longish comment.
        (md_create_long_jump): Make the long jumps generate ADD.D offset,PC.
        (md_assemble): Handle a PIC relocation on prefix and normal
        instruction operands.
        <output_instruction.insn_type == CRIS_INSN_BRANCH>: Handle
        "complex" operand expressions.  Call frag_more outside
        gen_cond_branch_32 parameter list.
        (cris_process_instruction): Handle PIC relocs on parsed
        operand expressions.  Validize PIC reloc sizes.
        (get_autoinc_prefix_or_indir_op): Handle PIC suffix.
        (gen_bdap): Handle "complex" operand expressions.
        (gen_cond_branch_32): Use as_warn_where, not as_warn.  Use
        ADD.D offset,PC as jump instruction if generating PIC.  Generate
        error instead of crashing on complex expressions.
        (cris_number_to_imm): Add segT parameter.  All callers changed.
        Use segT parameter, not now_seg, for segment of fixup.  Handle
        PCREL relocations but check that they are fully resolved.
        (md_parse_option): Handle OPTION_PIC.
        (tc_gen_reloc): Handle PIC relocs.
        (md_show_usage): Update for --pic.
        (md_apply_fix3): Renamed from md_apply_fix.
        (md_pcrel_from): Accept emitting PCREL relocs when ELF.
        (md_cris_force_relocation): Force relocation for PIC relocs.

        * config/tc-cris.h: Tweak attribution.
        (MD_APPLY_FIX3): Define.
        (IS_CRIS_PIC_RELOC): New macro.
        (TC_RELOC_RTSYM_LOC_FIXUP): Define.
        (tc_fix_adjustable): Don't adjust a globally visible symbol when
        generating ELF.
        (tc_frob_symbol): Avoid emitting undefined symbols.

2001-03-20  Alan Modra  <alan@linuxcare.com.au>

        * frags.h (struct frag): Add relax_marker.
        * write.c (is_dnrange): Delete.
        (relax_frag): Use correct types for `aim', `target', `address'.
        Delete `offset', `was_address'.  Test `relax_marker' instead of
        using fragile (and slow) address test.
        (relax_segment): Init and flip `relax_marker'.

2001-03-19  Alan Modra  <alan@linuxcare.com.au>

        * config/tc-i386.c (md_assemble <REGISTER_WARNINGS>): Correct
        used register name.

2001-03-18  Stephane Carrez  <Stephane.Carrez@worldnet.fr>

        * config/tc-m68hc11.c (md_pseudo_table): Recognize xrefb to comply
        with 'Motorola specification for assembly language input standard'.

2001-03-17  Richard Henderson  <rth@redhat.com>

        * dwarf2dbg.c (user_filenum, user_filenum_allocated): Remove.
        (dwarf2_directive_loc): Don't use them.
        (dwarf2_directive_file): Reject duplicate file definitions.
        (get_filenum): Zero allocated memory.
        (out_file_list): Complain about missing file definitions.

2001-03-17  Alan Modra  <alan@linuxcare.com.au>

        * read.c (do_org): Handle complex expressions.
        * cgen.c (gas_cgen_finish_insn): Likewise.

2001-03-15  David Mosberger  <davidm@hpl.hp.com>

        * config/tc-ia64.c (md): New member keep_pending_output.
        (ia64_flush_pending_output): Flush only if md.keep_pending_output
        is not set.
        (dot_xdata): Turn on md.keep_pending_output for the duration of
        this function.
        (dot_xfloat_cons): Ditto.
        (dot_xstringer): Ditto.
        (dot_xdata_ua): Ditto.
        (dot_xfloat_cons_ua): Ditto.

2001-03-15  Jim Wilson  <wilson@redhat.com>

        * config/tc-ia64.c (ia64_unrecognized_line, case '['): Add local
        label support.

2001-03-15  Alexandre Oliva  <aoliva@redhat.com>

        * config/tc-sh.c (parse_reg): Match capital MACH and MACL.

2001-03-15  DJ Delorie  <dj@redhat.com>

        * stabs.c (s_stab_generic): Don't corrupt the notes obstack by
        blindly freeing string if it isn't at the top of the obstack.

2001-03-13  Alan Modra  <alan@linuxcare.com.au>

        * config/tc-i386.c (RELOC_ENUM): Define.  Use throughout file.
        (NUM_FLAG_CODE): Define.
        (lex_got): New function.
        (got_reloc): New global var.
        (x86_cons_fix_new): New function.
        (x86_cons): New function.
        (i386_immediate): Use lex_got here, replacing inline code.  Change
        "ignoring junk.." error message to "junk.."
        (i386_displacement): Likewise.
        * config/tc-i386.h (TC_PARSE_CONS_EXPRESSION): Define.
        (x86_cons): Declare.
        (TC_CONS_FIX_NEW): Define.
        (x86_cons_fix_new): Declare.

2001-03-12  Nick Clifton  <nickc@redhat.com>

        * config/tc-arm.c (md_begin): Always set machine type based on
        cpu_variant.

2001-03-07  Alan Modra  <alan@linuxcare.com.au>

        * config/tc-i386.c (struct _i386_insn): Rename disp_reloc to reloc.
        (md_assemble) <smallest displacement>: Use correct field of i.op[]
        union.
        <JumpInterSegment output>: Use correct i.disp_reloc[].
        <immediate output>: Likewise.

2001-03-06  Nick Clifton  <nickc@redhat.com>

        * config/tc-arm.c (md_apply_fix3): Clear bit zero of offset in
        BLX(1) instruction.

2001-03-06  Igor Shevlyakov  <igor@windriver.com>

        * config/tc-m68k.c : Add 5407 to archs[] table.
        (HAVE_LONG_BRANCH): Add mcf5407.
        (select_control_regs): Recognize 5407.

2001-03-02  Dave Brolley  <brolley@redhat.com>

        * config/tc-m32r.c (expand_debug_syms): Call frag_align_code rather
        than m32r_do_align.

2001-03-02  Richard Sandiford  <rsandifo@redhat.com>

        * config/atof-ieee.c (TC_LARGEST_EXPONENT_IS_NORMAL): New macro.
        (gen_to_words): Print warnings if NaNs are found and the target CPU
        does not support them.  Allow largest exponent to be used in normal
        numbers if TC_LARGEST_EXPONENT_IS_NORMAL evaluates to true.

2001-02-28  Andreas Jaeger  <aj@suse.de>, Bo Thorsen  <bo@suse.de>

        * config/tc-i386.c (tc_gen_reloc): Remove ugly hack which is not needed
        anymore since we use bfd_elf_generic_reloc now.
        (md_apply_fix3): Only apply hack for partial_inplace if not using RELA.

2001-02-27  Alan Modra  <alan@linuxcare.com.au>

        * configure.in (BFD_VERSION): New.
        (AM_INIT_AUTOMAKE): Use $BFD_VERSION.
        * configure: Regenerate.
        * Makefile.am: Run "make dep-am"
        * Makefile.in: Regenerate.
        * doc/Makefile.in: Regenerate.

2001-02-26  Mark Elbrecht  <snowball3@bigfoot.com>

        * config/obj-coff.c [BFD_ASSEMBLER] (obj_coff_section): Set
        SEC_NEVER_LOAD when the 'n' flag is used.
        Add SEC_NEVER_LOAD to matchflags.

2001-02-24  Stephane Carrez  <Stephane.Carrez@worldnet.fr>

        * symbols.c (decode_local_label_name): Initialize message_format
        only when an error is reported (perf pb due to I18N).

2001-02-23  H.J. Lu  <hjl@gnu.org>

        * dwarf2dbg.c (dwarf2_directive_file): Call s_app_file (0) if
        BFD_ASSEMBLER is not defined.

2001-02-23  Richard Sandiford  <rsandifo@redhat.com>

        * config/tc-mn10300.c (md_apply_fix3): Don't mark a fixup as
        done if it's against a symbol.

2001-02-22  Timothy Wall  <twall@cygnus.com>

        * config/tc-ia64.c (ia64_target_format): Return ia64-aix-specific
        target formats if applicable.
        * config/te-ia64aix.h: New.  Configuration for AIX5 on IA-64.
        * Makefile.am (TARG_ENV_HFILES): Added config/te-ia64aix.h.
        * Makefile.in: Regenerated.
        * configure.in: Added configuration for ia64-*-aix*.
        * configure: Regenerated.

2001-02-21  David Mosberger  <davidm@hpl.hp.com>

        * config/tc-ia64.c (enum operand_match_result): New type.
        (operand_match): Change return type to operand_match_result.
        Fix all returns appropriately, adding support for returning the
        out-of-range result.
        (parse_operands): New locals result, error_pos, out_of_range_pos,
        curr_out_of_range_pos.  Rewrite operand matching loop to give better
        error messages.

2001-02-21  David Mosberger  <davidm@hpl.hp.com>

        * config/tc-ia64.c (struct unwind): Add member "prologue_count".
        (dot_proc): Clear unwind.prologue_count to zero.
        (dot_prologue): Increment unwind.prologue_count.
        (dot_restore): If second operand is omitted, use
        unwind.prologue_count -1 for "ecount" (# of additional regions to
        pop).  Decrement unwind.prologue_count by number of regions
        popped.

2001-02-21  Nick Clifton  <nickc@redhat.com>

        * doc/as.texinfo (Section): Note that some flags to the COFF
        version of .section remove attributes rather than setting them.

2001-02-20  Kazu Hirata  <kazu@hxi.com>

        * config/tc-pdp11.c: Fix formatting.
        * config/tc-pdp11.h: Likewise.

2001-02-20  Bo Thorsen  <bo@suse.de>

        * config/tc-i386.c (tc_i386_fix_adjustable): Fix GOTPCREL GOT
        entry.

2001-02-18  David O'Brien  <obrien@FreeBSD.org>

        * configure.in (cpu_type, arch): Add a generic FreeBSD specification as
        all FreeBSD platforms should look the same at this level.
        * configure: Rebuilt.
        * config/tc-i386.c: Add support for old FreeBSD a.out hosts.

2001-02-18  lars brinkhoff  <lars@nocrew.org>

        * Makefile.am: Add PDP-11 target.
        * configure.in: Likewise.
        * config/tc-pdp11.c: New file.
        * config/tc-pdp11.h: New file.
        * doc/Makefile.am: Add PDP-11 documentation.
        * doc/all.texi: Likewise.
        * doc/as.texinfo: Likewise.
        * doc/c-pdp11.texi: New file.

2001-02-16  matthew green  <mrg@redhat.com>

        * cgen.c (gas_cgen_md_apply_fix3): Support BFD_RELOC_64.

2001-02-13  Jim Wilson  <wilson@redhat.com>

        * config/tc-ia64.c (operand_match, case TAG13): Make a BFD_RELOC_UNUSED
        reloc instead of a 0 reloc.
        (md_apply_fix3): Check for BFD_RELOC_UNUSED instead of 0, and mark it
        as done.
        * config/tc-ia64.h (TC_RELOC_RTSYM_LOC_FIXUP): Likewise.

2001-02-13  Ian Lance Taylor  <ian@zembu.com>

        * write.c (is_dnrange): Stop as soon as the address becomes
        larger.
        (relax_frag): Add segment parameter.  Only call symbol_get_frag
        once.  Only call is_dnrange if the symbol is in the same segment,
        and the symbol address is larger.
        (relax_segment): Pass segment to md_relax_frag and relax_frag.
        * write.h (relax_frag): Update declaration.
        * config/tc-fr30.c (fr30_relax_frag): Add segment parameter.  Pass
        it to relax_frag.
        * config/tc-m32r.c (m32r_relax_frag): Likewise.
        * config/tc-m32r.h (md_relax_frag): Add segment parameter.
        (m32r_relax_frag): Update declaration.
        * config/tc-mips.h (md_relax_frag): Add segment parameter.
        * config/tc-tic54x.h (md_relax_frag): Likewise.
        * doc/internals.texi (CPU backend): Update documentation for
        md_relax_frag.

2001-02-13  Alan Modra  <alan@linuxcare.com.au>

        * doc/c-i386.texi (i386-Arch): Add "jumps"/"nojumps" blurb.
        Mention effect of < 386 architectures on jump promotion.
        (i386-Jumps): xref above.  Don't assume long disp is 32 bits.

        * config/tc-i386.c (no_cond_jump_promotion): New.
        (set_cpu_arch): Parse "jumps" arch modifier.
        (insn_size): Modify usage comment.
        (ENCODE_RELAX_STATE): Reformat and protect macro arg.
        (SIZE_FROM_RELAX_STATE): Rename to DISP_SIZE_FROM_RELAX_STATE.
        (TYPE_FROM_RELAX_STATE): New define.
        (UNCOND_JUMP, COND_JUMP): Renumber.
        (md_relax_table): Reorder to suit.
        (COND_JUMP86): New define.
        (md_relax_table): Handle COND_JUMP86 cases. Add a few comments.
        (md_assemble): Create frag var for jumps of max size, encode relax
        state for COND_JUMP86.
        (md_estimate_size_before_relax): Handle COND_JUMP86 cases, and
        leave conditional jumps small if no_cond_jump_promotion.
        (md_convert_frag): Likewise.

        * expr.c (operator): Don't bump input_line_pointer for two char
        operators.  Instead return operator size via new param num_chars.
        (expr): Use above to parse multi-char operators correctly.

Mon Feb 12 17:45:50 CET 2001  Jan Hubicka  <jh@suse.cz>

        * config/tc-i386.c (i386_displacement): Fix handling of
        BFD_RELOC_X86_64_GOTPCREL.
        (i386_validate_fix): Likewise.

2001-02-12  Philip Blundell  <pb@futuretv.com>

        * config/tc-arm.c (do_ldst): Improve warnings for unpredictable
        ldrt/strt instructions.

2001-02-11  Maciej W. Rozycki  <macro@ds2.pg.gda.pl>

        * config/tc-mips.c (macro): For M_LA_AB emit a
        BFD_RELOC_MIPS_CALL16 relocation or a
        BFD_RELOC_MIPS_CALL_HI16/BFD_RELOC_MIPS_CALL_LO16 pair instead of
        BFD_RELOC_MIPS_GOT16 and
        BFD_RELOC_MIPS_GOT_HI16/BFD_RELOC_MIPS_GOT_LO16, respectively for
        loading the jump register when generating SVR4_PIC code.

2001-02-10  Chris Demetriou  <cgd@broadcom.com>

        * configure.in: Make 'mipself' and 'mipsecoff' emulations
        map to MIPS-specific files, as they used to do before the
        change on 2000-05-21.
        * configure: Regerate.

2001-02-10  Chris Demetriou  <cgd@broadcom.com>

        * config/tc-mips.c (md_parse_option): Don't try to compile
        ELF-only option code if not ELF.

2001-02-08  David Mosberger  <davidm@hpl.hp.com>

        * config/tc-ia64.h (md_elf_section_type): New macro.
        (ELF_TC_SPECIAL_SECTIONS): Drop .IA_64.unwind and .IA_64.unwind_info
        (they're now handled via ia64_elf_section_type.

        * config/tc-ia64.c (unwind): New members saved_text_seg,
        saved_text_subseg, and force_unwind_entry.
        (optimize_unw_records): New function to optimize away unnecessary
        unwind directives.
        (ia64_elf_section_type): New function.
        (output_unw_records): Generate unwind info only if the size is
        non-zero or if it's forced for some other reason (e.g.,
        handlerdata or a personality routine).
        (generate_unwind_image): Don't switch back to previous
        section---stay inside the unwind info section instead so that
        handlerdata that may follow goes into the right place.
        (dot_handlerdata): Force generation of unwind entry and save the
        current active text segment before generating unwind image.
        (dot_unwentry): Force generation of unwind entry.
        (dot_personality): Ditto.
        (dot_endp): Generate unwind table entry only if there is
        some unwind info or the unwind entry was forced.

        * config/tc-ia64.c (make_unw_section_name): New macro to form
        unwind section name.
        (generate_unwind_image): Add "text_name" argument.  Use it to
        form unwind section name.
        (dot_handlerdata): Determine current segment (section) name and
        pass it to generate_unwind_image().
        (dot_endp): Determine current segment (section) name and use
        it to determine the appropriate unwind section name.
        (ia64_md_do_align): Add missing ATTRIBUTE_UNUSED declarations to
        n, fill, and max arguments.

2001-02-09  Schwidefsky  <schwidefsky@de.ibm.com>

        * Makefile.am: Add linux target for S/390.
        * configure.in: Likewise.
        * config/tc-s390.c: New file.
        * config/tc-s390.h: New file.

2001-02-09  Alexandre Oliva  <aoliva@redhat.com>

        * config/tc-sh.c (md_pseudo_table): Add uaquad.  Use s_uacons for
        2byte, 4byte and 8byte.

2001-02-08  Alan Modra  <alan@linuxcare.com.au>

        * config/tc-hppa.c (pa_build_unwind_subspace): Don't call
        md_number_to_chars with size > sizeof (valueT).

2001-02-06  H.J. Lu  <hjl@gnu.org>

        * config/tc-ia64.h (TC_RELOC_RTSYM_LOC_FIXUP): Do fixup if
        there is no relocation.

2001-02-06  H.J. Lu  <hjl@gnu.org>

        * config/tc-ia64.h (TC_RELOC_RTSYM_LOC_FIXUP): New. Defined.

        * config/tc-ia64.c (md_parse_option): Only accept the valid
        ia64 options on "-axxx".

2001-02-05  Jim Wilson  <wilson@redhat.com>

        * config/tc-ia64.c (errata_nop_necessary_p): Return 0 instead of
        aborting for invalid operands.

2001-02-06  Alan Modra  <alan@linuxcare.com.au>

        * config/tc-hppa.c (fix_new_hppa): Pass in unwind directly rather
        than via pointer.  Update all callers.
        (UNWIND_LOW32): Define.
        (UNWIND_HIGH32): Define.
        (pa_build_unwind_subspace): Use the above macros instead of dumping
        bitfields directly.  Call frag_more once rather than multiple times.
        (md_assemble): Use UNWIND_LOW32.
        (pa_entry): Likewise
        (pa_procend): Likewise.
        (process_exit): Use UNWIND_HIGH32.

2001-02-04  Stephane Carrez  <Stephane.Carrez@worldnet.fr>

        * config/tc-m68hc11.h (LISTING_HEADER): Use m68hc11_listing_header
        function to select the header according to the cpu.
        (md_after_pass_hook, md_do_align): Remove.
        (md_cleanup, m68hc11_cleanup): Remove.
        (md_pcrel_from_section): Declare.
        * config/tc-m68hc11.c (build_dbranch_insn): Remove insn_size.
        (build_jump_insn, build_insn): Likewise.
        (m68hc11_listing_header): New function.
        (m68hc11_cleanup): Remove.

2001-02-02  Stephane Carrez  <Stephane.Carrez@worldnet.fr>

        * config/tc-m68hc11.c (relaxable_symbol): Relax externally visible
        symbols because there is no support for shared libraries and these
        symbols can't be overridden (unless they are weak).

2001-02-01  Momchil Velikov  <velco@fadata.bg>

        * dwarf2dbg.c (out_debug_abbrev): Terminate the abbreviations
        for the compilation unit with a zero byte.

2001-01-30  Alan Modra  <alan@linuxcare.com.au>

        * config/tc-hppa.c (pa_ip): Support 12 bit branches to absolute
        destinations.  Correct range check for 17 and 22 bit branches.

2001-01-25  Nick Clifton  <nickc@redhat.com>

        * config/tc-m68k.c (tc_gen_reloc): Do not abort if tcbit is
        still set.  Issue an error message instead.
        (md_estimate_size_before_relax): Delete unused variable
        'buffer_address'.  Fixup parentheses around if statement.

2001-01-23  Kazu Hirata  <kazu@hxi.com>

        * as.c: Fix formatting.
        * ehopt.c: Likewise.
        * messages.c: Likewise.
        * stabs.c: Likewise.
        * symbols.c: Likewise.

2001-01-23  Ben Elliston  <bje@redhat.com>

        * config/tc-m32r.c (m32r_handle_align): Declare type of fragp.

2001-01-22  Kazu Hirata  <kazu@hxi.com>

        * config/tc-alpha.c: Fix formatting.

2001-01-19  Kazu Hirata  <kazu@hxi.com>

        * config/tc-alpha.c: Fix formatting.

2001-01-18  Kazu Hirata  <kazu@hxi.com>

        * config/tc-alpha.c: Fix formatting.

2001-01-18  Nick Clifton  <nickc@redhat.com>

        * config/tc-arm.c (ldm_flags): Remove redundant bit from "fa" and
        "da" flags.
        (stm_flags): Remove redundant bit from "ed" and "da" flags.

2001-01-18  Alexandre Oliva  <aoliva@redhat.com>

        * configure.in (cpu_type, arch): Match i386 too.
        * configure: Rebuilt.

2001-01-16  Kazu Hirata  <kazu@hxi.com>

        * config/tc-i386.c: Fix formatting.

2001-01-16  Alan Modra  <alan@linuxcare.com.au>

        * config/tc-hppa.c (tc_gen_reloc): Use SEGREL32 instead of DIR32
        relocs for .PARISC.unwind section.

        * config/tc-hppa.c (pa_build_unwind_subspace): Build unwind
        depending on section flags, not just for .text.

2001-01-15  Jim Wilson  <wilson@redhat.com>

        * config/tc-ia64.c (ia64_flush_insns): Handle unwind directives
        not immediately followed by an instruction.

2001-01-15  Kazu Hirata  <kazu@hxi.com>

        * config/tc-m68hc11.c: Fix formatting.

2001-01-15  Nick Clifton  <nickc@redhat.com>

        * symbols.c (colon): Change 'already defined symbol' from a
        fatal error to an ordinary error.  There is no reason why this
        error should be fatal.

        * message.c (as_fatal): Delete output file, if one has been
        created.

2001-01-14  Alan Modra  <alan@linuxcare.com.au>

        * config/tc-hppa.h (TARGET_FORMAT): Add hppa-linux variants.

2001-01-14  Kazu Hirata  <kazu@hxi.com>

        * config/tc-alpha.c: Fix formatting.
        * config/tc-arc.c: Likewise.
        * config/tc-arc.h: Likewise.
        * config/tc-d10v.c: Likewise.
        * config/tc-i370.c: Likewise.
        * config/tc-i386.c: Likewise.
        * config/tc-i960.c: Likewise.
        * config/tc-m68k.c: Likewise.
        * config/tc-ppc.c: Likewise.
        * config/tc-sparc.c: Likewise.
        * config/tc-tahoe.c: Likewise.
        * config/tc-vax.c: Likewise.

        * config/tc-arc.c: Fix formatting.

        * config/tc-arc.c: Fix formatting.

2001-01-14  Alan Modra  <alan@linuxcare.com.au>

        * config/tc-hppa.c (pa_build_unwind_subspace): Use SEGREL32 for
        both 32 and 64 bit ELF.

        * config/tc-hppa.c (pa_ip): Store `a' flag in bit zero of operand
        and don't bother storing `m' for "ce" completer.  Tidy handling of
        'J' and 'K' operands to suit.  Handle '<' and '>' operands.

Sun Jan 14 00:36:42 MET 2001  Jan Hubicka  <jh@suse.cz>

        * config/tc-i386.h (TARGET_MACH): New macro.
        (i386_mach): Declare.
        * config/tc-i386.c (i386_mach): New function.

2001-01-13  Philip Blundell  <philb@gnu.org>

        * doc/as.texinfo: Fix spelling and cross-references.

        * doc/c-arm.texi: Fix typos.  Say that `;' is a line separator
        character for all systems, not just GNU/Linux.  Make it explicit
        that `-k' doesn't affect code generation, just ELF flags.

Sat Jan 13 01:47:35 MET 2001  Jan Hubicka <jh@suse.cz>

        * config/tc-i386.c (md_assemble): Check cpu_flags even for nullary
        instructions.

2001-01-12  Frank Ch. Eigler  <fche@redhat.com>

        * cgen.c (gas_cgen_finish_insn): Call dwarf2_emit_insn.

2001-01-12  Nick Clifton  <nickc@redhat.com>

        * as.c (print_args): Update copyright date to 2001.

2001-01-12  Peter Targett  <peter.targett@arccores.com>

        * doc/c-arc.texi: New file.
        Some sections to be expanded.

2001-01-12  Alan Modra  <alan@linuxcare.com.au>

        * config/tc-i386.c (md_longopts): Recognize "--64" only for ELF.
        (md_parse_option): Always accept "--32".

2001-01-11  Peter Targett  <peter.targett@arccores.com>

        * as.h (TC_ARC): Ensure struc-symbol.h included.
        * as.c (dwarf2dbg.h): Include to remove implicit declaration
        warnings.
        * struc-symbol.h (SYMBOLS_NEED_BACKPOINTERS): Define.
        (TARGET_SYMBOL_FIELDS) added.

        * doc/Makefile.am (CPU_DOCS): Added c-arc.texi.
        * doc/c-arc.texi: New file.
        Some sections to be expanded.
        * doc/as.texinfo: Update command-line options.
        Removed outdated text for ARC dependant features, instead include
        text from above file.

        * config/obj-elf.h (ELF_TARGET_SYMBOL_FIELDS): Define local flag.
        (TARGET_SYMBOL_FIELDS): Alias to previous definition.
        (targ-cpu.h) header.
        * config/tc-arc.h:
        * config/tc-arc.c: New updated configuration for
        ARC, including selection of core variants, and extensibility of
        instructions, registers etc. through directives.

        * config/tc-arc.c (arc_extinst): Minor corrections for
        error messages.
        (arc_common) Likewise. Make alignment argument optional for local
        symbols also, with default of zero.

2001-01-11  Stephane Carrez  <Stephane.Carrez@worldnet.fr>

        * config/tc-m68hc11.c (md_estimate_size_before_relax): Fix
        STATE_INDEXED_OFFSET when the symbol is undefined (16-bit offset).
        (build_indexed_byte): Don't relax indexed byte, use 16-bit offset
        and fix_new_exp() instead.
        (md_convert_frag): For indexed post byte use the symbol value
        rather than the displacement.
        (md_relax_table): Fix indexed offset relax.

2001-01-11  Stephane Carrez  <Stephane.Carrez@worldnet.fr>

        * config/tc-m68hc11.c (md_estimate_size_before_relax):Don't
        relax weak symbols.
        (relaxable_symbol): New function.

2001-01-11  Andreas Jaeger  <aj@suse.de>

        * config/tc-i386.h (TC_RELOC_GLOBAL_OFFSET_TABLE): Removed, it's
        not used anywhere.

2001-01-10  Nick Clifton  <nickc@redhat.com>

        * config/tc-arm.c (arm_fix_adjustable): Define for OBJ_COFF.
        * config/tc-arm.h (obj_fix_adjustable): Define for OBJ_COFF

2001-01-10  Nick Clifton  <nickc@redhat.com>

        * symbols.c (DOLLAR_LABEL_CHAR): New constant - the magic
        character used to dollar local symbols.
        (LOCAL_LABEL_CHAR): New constant - the magic character used to
        local label symbols.
        (dollar_label_name): Use DOLLAR_LABEL_CHAR.
        (fb_label_name): Prefix local labels with LOCAL_LABEL_PREFIX,
        if defined.
        Use LOCAL_LABEL_CHAR.
        (decode_local_label_name): Skip LOCAL_LABEL_PREFIX.
        Use DOLLAR_LABEL_CHAR and LOCAL_LABEL_CHAR.
        (S_IS_LOCAL): Use DOLLAR_LABEL_CHAR and LOCAL_LABEL_CHAR.

2001-01-08  Bo Thorsen  <bo@suse.de>

        * config/tc-i386.c (i386_immediate, i386_displacement):
        GOTPCREL check fix.

2001-01-07  Ian Lance Taylor  <ian@zembu.com>

        * doc/c-i386.texi (i386-Arch): Remove spaces incorrectly inserted
        in last change.

2001-01-07  Philip Blundell  <philb@gnu.org>

        * doc/as.texinfo (Bug Reporting): Update email address for
        reports.
        * README: Likewise.

Sat Jan  6 13:33:10 MET 2001  Jan Hubicka  <jh@suse.cz>

        * configure.in: Define DEFAULT_ARCH for i386.
        * config/tc-i386.c (md_assemble): Return after the error message;
        move testing for 64bit operands to proper place.

2001-01-06  Jan Hubicka <jh@suse.cz>, Andreas Jaeger  <aj@suse.de>

        * doc/as.texinfo: Document '#' as comment character for i386 and
        x86_64. Add AMD x86-64 into menu of machine dependent information.

        * doc/c-i386.texi: Document x86_64 extensions.

Fri Jan  5 13:26:42 MET 2001  Jan Hubicka  <jh@suse.cz>

        * config/tc-i386.c (md_assemble): Handle third byte of the opcode as prefix.

Thu Jan  4 22:25:26 MET 2001  Jan Hubicka  <jh@suse.cz>

        * config/tc-i386.c (cpu_arch): Add Pentium4 and modify sledgehammer entry.
        * NEWS: Add note about Pentium4 support.

Wed Jan  3 17:26:32 MET 2001  Jan Hubicka  <jh@suse.cz>

        * config/tc-i387.c (pi, pte, pt): Update.
        (type_names): Add new types.

Wed Jan  3 16:26:52 MET 2001  Jan Hubicka  <jh@suse.cz>

        * config/tc-i386.h (CpuK6, CpuAthlon, CpuSledgehammer, CpuMMX, Cpu3dnow,
        CpuUnknown): Renumber
        (CpuP4, CpuSSE2): New.
        (CpuUnknownFlags): Add CpuP4 and CpuSSE2

2001-01-03  Philip Blundell  <pb@futuretv.com>

        * config/tc-alpha.c (alpha_force_relocation): Handle vtable
        relocs.
        (alpha_fix_adjustable): Likewise.
        (md_apply_fix): Likewise.

2000-12-31  H.J. Lu  <hjl@gnu.org>

        * listing.c (listing_message): Allocate string only if it is
        used.

        * configure: Rebuild.

2000-12-31  Hans-Peter Nilsson  <hp@bitrange.com>

        * doc/internals.texi (Relaxing with a table) <after relaxation>:
        Point out caveats with generating fixups for the opcode in a frag.

Sat Dec 30 19:02:48 MET 2000  Jan Hubicka  <jh@suse.cz>

        * configure.in: Add support for x86_64 and x86_64-*-linux-gnu*
        * NEWS: Add x86_64.

2000-12-29  H.J. Lu  <hjl@gnu.org>

        * listing.c (calc_hex): Print the variable part only if the
        fragment type is rs_fill.

2000-12-29  Hans-Peter Nilsson  <hp@bitrange.com>

        * doc/internals.texi (tc_conditional_pseudoop,
        TC_LINKRELAX_FIXUP): Fix typos.

2000-12-28  Richard Henderson  <rth@redhat.com>

        * write.c (subsegs_finish): Fix thinko last change -- don't
        "optimize" the alignment == 0 case.

2000-12-28  Richard Henderson  <rth@redhat.com>

        * as.h (rs_align_test): New.
        * frags.c (NOP_OPCODE): Move default from read.c.
        (MAX_MEM_FOR_RS_ALIGN_CODE): New default.
        (frag_align_code): New.
        * frags.h (frag_align_code): Declare.
        * read.c (NOP_OPCODE): Remove.
        (do_align): Use frag_align_code.
        * write.c (NOP_OPCODE): Remove.
        (get_recorded_alignment): New.
        (cvt_frag_to_fill): Handle rs_align_test.
        (relax_segment): Likewise.
        (subsegs_finish): Align last subseg in section to the
        section alignment.  Use frag_align_code.
        * write.h (get_recorded_alignment): Declare.
        * config/obj-coff.c (size_section): Handle rs_align_test.
        (fill_section, fixup_mdeps): Likewise.
        (write_object_file): Use frag_align_code.

        * config/tc-alpha.c (alpha_align): Use frag_align_code.
        (alpha_handle_align): New.
        * config/tc-alpha.h (HANDLE_ALIGN): New.
        (MAX_MEM_FOR_RS_ALIGN_CODE): New.

        * config/tc-i386.h (md_do_align): Use frag_align_code.
        (MAX_MEM_FOR_RS_ALIGN_CODE): New.

        * config/tc-ia64.c (ia64_md_do_align): Don't do code alignment.
        (ia64_handle_align): New.
        * config/tc-ia64.h (HANDLE_ALIGN): New.
        (MAX_MEM_FOR_RS_ALIGN_CODE): New.

        * config/tc-m32r.c (m32r_do_align): Remove.
        (m32r_handle_align): New.
        (fill_insn): Use frag_align_code.
        * config/tc-m32r.h (md_do_align): Remove.
        (HANDLE_ALIGN, MAX_MEM_FOR_RS_ALIGN_CODE): New.
        * config/tc-m88k.c, config/tc-m88k.h: Similarly.
        * config/tc-mips.c, config/tc-mips.h: Similarly.

        * config/tc-sh.c (sh_cons_align): Use rs_align_test.
        (sh_handle_align): Likewise.  Handle rs_align_code.
        (sh_do_align): Remove.
        * config/tc-sh.h (md_do_align): Remove.
        (MAX_MEM_FOR_RS_ALIGN_CODE): New.

        * config/tc-sparc.c (sparc_cons_align): Use rs_align_test.
        (sparc_handle_align): Likewise.  Handle rs_align_code.
        * config/tc-sparc.h (md_do_align): Remove.
        (MAX_MEM_FOR_RS_ALIGN_CODE): New.

2000-12-22  DJ Delorie  <dj@redhat.com>

        * config/tc-d10v.c (md_assemble): set prev_seg and prev_subseg
        when we assemble the first half of a pair.

2000-12-22  H.J. Lu  <hjl@gnu.org>

        * config/tc-i386.c (reloc): Update the macro for non-bfd
        assembler.
        (BFD_RELOC_X86_64_GOTPCREL): Set to 0 for non-bfd assembler.

2000-12-22  H.J. Lu  <hjl@gnu.org>

        * dwarf2dbg.c (dwarf2_finish): Remove #if BFD_ASSEMBLER.

Wed Dec 20 14:21:22 MET 2000  Jan Hubicka  <jh@suse.cz>

        * config/tc-i386.h (i386_target_format): Define even for ELFs.
        (QWORD_MNEM_SUFFIX): New macro.
        (CpuK6,CpuAthlon,CpuSledgehammer, Cpu64, CpuNo64, CpuUnknownFlags):
        New macros
        (CpuMMX,CpuSSE,Cpu3dnow, CpuUnknown): Renumber.
        (IgnoreSize, DefaultSize, No_?Suf, FWait, IsString, regKludge, IsPrefix,
        ImmExt): Renumber.
        (Size64, No_qSuf, NoRex64, Rex64): New macros.
        (Reg64, Imm32S, Imm64, Disp32S, Disp64): New macros.
        (Imm8, Imm8S, Imm16, Imm32, Imm1, BaseIndex, Disp8, Disp16, Disp32,
        InOutPortReg,ShiftCount, Control, Debug, Test, FloatReg, FloatAcc,
        SReg2, SReg3, Acc, JumpAbsolute, RegMMX, RegXMM, EsSeg, InvMem):
        Renumber.
        (Reg, WordReg): Add Reg64.
        (Imm): Add Imm32S and Imm64.
        (EncImm): New.
        (Disp): Add Disp64 and Disp32S.
        (AnyMem): Add Disp32S.
        (RegRex, RegRex64): New macros.
        (rex_byte): New type.
        * config/tc-i386.c (set_16bit_code_flag): Kill.
        (fits_in_unsigned_long, fits_in_signed_long): New functions.
        (reloc): New parameter "signed"; support x86_64.
        (set_code_flag): New.
        (DEFAULT_ARCH): New macro; default to "i386".
        (default_arch): New static variable.
        (struct _i386_insn): New fields Operand_PCrel; rex.
        (flag_16bit_code): Kill; All tests replaced to "flag_code == CODE_64BIT"
        (flag_code): New enum and static variable.
        (use_rela_relocations): New static variable.
        (flag_code_names): New static variable.
        (cpu_arch_flags): Default to CpuUnknownFlags|CpuNo64.
        (cpu_arch): Add "sledgehammer"; Add CPUAthlon to Athlon and CpuK6 to
        K6 and Athlon.
        (i386_align_code): Return plain "nop" for x86_64.
        (mode_from_disp_size): Support Disp32S.
        (smallest_imm_type): Support Imm32S and Imm64.
        (offset_in_range): Support size of 8.
        (set_cpu_arch): Do not clobber to Cpu64/CpuNo64.
        (md_pseudo_table): Add "code64"; use set_code_flat.
        (md_begin): Emit sane error message on hash failure.
        (tc_i386_fix_adjustable): Support x86_64 relocations.
        (md_assemble): Support QWORD_MNEM_SUFFIX, REX registers,
        instructions supported on particular arch just partially,
        output of 64bit immediates, handling of Imm32S and Disp32S type.
        (i386_immedaite): Support x86_64 relocations; support 64bit constants.
        (i386_displacement): Likewise.
        (i386_index_check): Cleanup; support 64bit addresses.
        (md_apply_fix3): Support x86_64 relocation and rela.
        (md_longopts): Add "32" and "64".
        (md_parse_option): Add OPTION_32 and OPTION_64.
        (i386_target_format): Call even for ELFs; choose between
        elf64-x86-64 and elf32-i386.
        (i386_validate_fix): Refuse GOTOFF in 64bit mode.
        (tc_gen_reloc): Support rela relocations and x86_64.
        (intel_e09_1): Support QWORD.

2000-12-15  Diego Novillo  <dnovillo@redhat.com>

        * config/tc-i386.c (intel_e09_1): Only flag as a memory operand if
        it's not an offset expression.
        (intel_e10_1): Ditto. Also, if the operand is an offset expression,
        keep the braces '[' and ']' in the output string.
        (intel_e11): Ditto. Also remove comparison intel_parser.op_modifier
        != FLAT. There is no such op_modifier.

2000-12-14  Michael Sokolov  <msokolov@ivan.Harhan.ORG>

        * dwarf2dbg.c: If we don't have <limits.h>, try including <sys/param.h>
        if we have it.

2000-12-13  Kazu Hirata  <kazu@hxi.com>

        * as.h: Fix formatting.
        * cgen.h: Likewise.
        * dwarf2dbg.c: Likewise.
        * input-scrub.c: Likewise.
        * read.h: Likewise.

2000-12-13  Mark Elbrecht  <snowball3@bigfoot.com>

        * configure.in (i386-*-msdosdjgpp): Set bfd_gas to yes.
        configure: Regenerate.

2000-12-13  Michael Sokolov  <msokolov@ivan.Harhan.ORG>

        * dwarf2dbg.c: #include <limits.h> only if it exists.

2000-12-13  Rodney Brown  <RodneyBrown@mynd.com>

        * config/tc-hppa.c (pa_ip): Correct CHECK_FIELD typo.
        (md_apply_fix): Here too.

2000-12-12  Jim Wilson  <wilson@redhat.com>

        * config/tc-ia64.h (ia64_init): Add prototype.

2000-12-12  H.J. Lu  <hjl@gnu.org>

        * dwarf2dbg.c: Enabled only if BFD_ASSEMBLER is defined.

        * read.h (outputting_stabs_line_debug): Change it to int.
        * stabs.c (outputting_stabs_line_debug): Likewise.

2000-12-12  Geoffrey Keating  <geoffk@redhat.com>

        * config/obj-bout.c (obj_crawl_symbol_chain): Don't take
        the address of a function result.

2000-12-12  Franz Sirl  <Franz.Sirl-kernel@lauterbach.com>

        * config/tc-ppc.c (md_pseudo_table): Add .file and .loc.
        (md_assemble): Call dwarf2_emit_insn.
        (shlib): Fix typo SHILB -> SHLIB.
        (md_parse_option): Likewise.
        (ppc_elf_validate_fix): Likewise:
        * config/tc-ppc.h (DWARF2_LINE_MIN_INSN_LENGTH): New.

2000-12-12  Nick Clifton  <nickc@redhat.com>

        * cgen.h: Fix formatting.
        * input-scrub.c: Fix formatting.
        * macro.c: Fix formatting.
        * config/tc-mips.c: Fix formatting.
        * doc/c-mips.texi: Fix formatting.

Mon Dec 11 14:35:42 MET 2000  Jan hubicka  <jh@suse.cz>

        * config/tc-i386.c (md_assemble): Refuse 's' and 'l' suffixes in the intel
        mode; convert 'd' suffix to 's' or 'l'; remove all DWORD_MNEM_SUFFIX
        references.
        (intel_e09_1): Convert QWORD to 'l' suffix for FP operations; refuse
        otherwise.
        * config/tc-i386.h (DWORD_MNEM_SUFFIX): Kill.
        (No_dSuf): Kill.

        * i386.h (*_Suf): Remove No_dSuf.
        (d_suf, wld_Suf,sld_Suf, sldx_Suf, bwld_Suf, d_FP, sld_FP, sldx_FP)
        Remove.
        (i386_optab): Remove 'd' in the suffixes.

2000-12-06  Mark Elbrecht  <snowball3@bigfoot.com>

        * config/tc-i386.c (T_SHORT): Undefine before defining.

2000-12-05  Kazu Hirata  <kazu@hxi.com>

        * config/tc-mips.c: Fix formatting.

2000-12-04  Matthew Hiller  <hiller@redhat.com>

        * config/tc-d10v.c (flag_allow_gstabs_packing): New variable.
        (md_longopts): New options --gstabs-packing, --no-gstabs-packing.
        (md_show_usage): Ditto.
        (md_parse_option): Ditto.
        (d10v_cleanup): Writes pending instruction only if
        ! outputting_stabs_line_debug || ! flag_allow_gstabs_packing.
        Fix compile time warning messages.

        * doc/c-d10v.texi: Documents new options.

2000-12-04  Matthew Hiller  <hiller@redhat.com>

        * stabs.c (outputting_stabs_line_debug): New variable.
        (stabs_generate_asm_lineno): Set outputting_stabs_line_debug at
        function entry and unset at function exit.

        * read.h (outputting_stabs_line_debug): New extern declaration.

        * as.c: Include dwarf2dbg.h for definition of dwarf2_finish.

        * dwarf2dbg.c: Fix compile time warning messages.

2000-12-03  Kazu Hirata  <kazu@hxi.com>

        * config/tc-a29k.c: Fix formatting.
        * config/tc-alpha.c: Likewise.
        * config/tc-arm.c: Likewise.
        * config/tc-cris.c: Likewise.
        * config/tc-hppa.c: Likewise.
        * config/tc-i370.c: Likewise.
        * config/tc-i386.c: Likewise.
        * config/tc-i860.c: Likewise.
        * config/tc-i960.c: Likewise.
        * config/tc-ia64.c: Likewise.
        * config/tc-m68hc11.c: Likewise.
        * config/tc-m68k.c: Likewise.
        * config/tc-m88k.c: Likewise.
        * config/tc-pj.c: Likewise.
        * config/tc-ppc.c: Likewise.
        * config/tc-sh.c: Likewise.
        * config/tc-sparc.c: Likewise.
        * config/tc-tahoe.c: Likewise.
        * config/tc-vax.c: Likewise.

2000-12-01  Chris Demetriou  <cgd@sibyte.com>

        * config/tc-mips.c (mips_ip): When calculating offsets,
        don't accept as constant the difference between the
        addresses of symbols in two different sections.

        * config/tc-mips.c (macro_build): Add new 'U' and 'J' operand
        specifiers.
        (validate_mips_insn): Likewise.  Also, update 'B' operand
        specifier to use OP_*_CODE20 constants and delete 'm' operand
        specifier.
        (mips_ip): Remove 'm' operand specifier, add 'U' and 'J'
        operand specifiers.  Change warning generated by 'B' operand
        specifier to reflect its new multi-purpose usage.

        * config/tc-mips.c (mips_set_options): Use ISA_UNKNOWN rather than
        -1, and update comment.
        (file_mips_isa): Likewise.
        (mips_cpu): Use CPU_UNKNOWN rather than -1, and update comment.
        (ISA_HAS_COPROC_DELAYS, ISA_HAS_64BIT_REGS, gpr_interlocks): Use
        ISA_* constants rather than hard-coded numbers.
        (mips_cpu_info): New structure.
        (mips_cpu_info_table): New table describing CPU and ISA names
        and numbers.
        (mips_cpu_info_from_name, mips_cpu_info_from_isa,
        mips_cpu_info_from_cpu): New functions.
        (mips_isa_to_str): New function to get string for ISA name.
        (mips_cpu_to_str): Convert to use mips_cpu_info_from_cpu, and
        return const char *.
        (md_begin): Redo CPU and ISA selection logic, using
        mips_cpu_info_from_*.  Convert to use ISA_* constants rather
        than hard-coded numbers.
        (append_insn, mips_emit_delays, macro, macro2): Convert to use
        ISA_* constants rather than hard-coded numbers.
        (mips_ip): Convert to use mips_isa_to_str to get ISA name.
        (md_longopts): Delete OPTION_NO_MIPS32.
        (md_parse_option): Convert to use ISA_* constants rather than
        hard-coded numbers.  Make OPTIONS_MIPS32 case treat MIPS32
        as an ISA.  Delete OPTION_NO_MIPS32 case.  Convert OPTION_MCPU
        to use strcasecmp to recognize "default" and to use
        mips_cpu_info_from_name to get CPU numbers from argument.
        (md_show_usage): Move -mips32 so it's with the rest of the ISA
        flags.  Change 4Kc, 4Kp and 4Km CPU entries to just be
        mips32-4k.
        (s_mipsset): Accept ISA value 32.
        * doc/as.texinfo: Clean up MIPS options summary slightly,
        remove -no-mips32.  Add note about -mips4 and -mips32
        specifying those ISA levels.  Delete -mips32 and -no-mips32
        cpu flag descriptions.
        * doc/c-mips.texi: Add -mips32 to list of ISA switches.  Clean
        up the supported CPU switch list, and replace 4Kc, 4Km, and
        4Kp entries with a single mips32-4k entry.  Note that you can
        use ".set mips32".

        * config/tc-mips.c (ISA_HAS_64BIT_REGS): Add checks for ISA_MIPS5 and
        ISA_MIPS64.
        (md_longopts, OPTION_MIPS5, OPTION_MIPS64): Add options for
        -mips5 and -mips64.
        (md_parse_option): Add cases for OPTION_MIPS5 and
        OPTION_MIPS64.
        (md_show_usage): Mention -mips5 and -mips64 arguments.
        (s_mipsset): Add cases for MIPS5 and MIPS64.
        (mips_cpu_info_table): Add entries for MIPS5 and MIPS64 ISAs
        and pseudo-CPUs.
        * doc/as.texinfo: Mention -mips5 and -mips64 options
        and their meanings.
        * doc/c-mips.texi: Likewise.  Also update introduction
        and ".set" usage information.

        * config/tc-mips.c (md_show_usage): Add "sb1" to the
        CPU list.
        (mips_cpu_info_table): Add SB-1 entries.
        * doc/c-mips.texi: Add "sb1" to the list of CPUs
        known to the -mcpu option.

        * doc/as.texinfo: Correct description of MIPS -mcpu
        option, by copying some of the text from doc/c-mips.texi.

2000-12-01  Joel Sherrill  <joel@OARcorp.com>

        * configure.in (arm-*-rtems*, a29k-*rtems*, h8300-*-rtems*):
        New targets.
        (sparc*-*-rtemself*, sparc*-*-rtemsaout*): New targets.
        (sparc*-*-rtems*): Switched from a.out to ELF.
        * configure: Regenerate.
        * config.in: Regenerate.
        * Makefile.in: Regenerate.
        * aclocal.m4: Regenerate.
        * po/gas.pot: Regenerate.

2000-11-30  Philip Blundell  <pb@futuretv.com>

        * config/obj-coff.c (obj_coff_weak): Use S_SET_WEAK if it exists,
        even in non BFD_ASSEMBLER case.

2000-11-30  Diego Novillo  <dnovillo@redhat.com>

        * config/tc-i386.c (md_assemble): Swap i.disp_relocs when using intel
        syntax.

2000-11-29  Richard Henderson  <rth@redhat.com>

        * dwarf2dbg.c: Rewrite from scratch.  Queue all debugging output
        until dwarf2_finish; use relaxation to get cross-fragment offsets;
        thread multiple subsegments properly; handle multiple code
        sections properly; emit proper compilation unit info for assembler
        generated debugging.

        * as.h (enum _relax_state): Add rs_dwarf2dbg.
        * dwarf2dbg.h (struct dwarf2_line_info): Remove filename.
        (dwarf2dbg_estimate_size_before_relax): Declare.
        (dwarf2dbg_relax_frag, dwarf2dbg_convert_frag): Declare.
        * write.c: Include dwarf2dbg.h.
        (cvt_frag_to_fill): Handle rs_dwarf2dbg.
        (relax_segment): Likewise.

2000-11-28  Hans-Peter Nilsson  <hp@bitrange.com>

        * config/tc-sh.c (md_convert_frag) <undefined symbol, conditional
        jump>: Use as_bad_where instead of as_bad.  Tweak error message
        accordingly.  Stabilize frag by updating fix part and resetting
        variant part.
        <undefined symbol, unconditional jump>: Ditto.
        (sh_elf_cons): Cast *input_line_pointer to unsigned char when
        indexing is_end_of_line[].
        (md_assemble): Initialize size to 0.
        (md_section_align): Mark parameter seg as unused.
        (parse_reg): Parse names case-insensitively.

2000-11-28  Kazu Hirata  <kazu@hxi.com>

        * config/obj-aout.h: Fix formatting.
        * config/obj-bout.h: Likewise.
        * config/obj-coff.c: Likewise.
        * config/obj-coff.h: Likewise.
        * config/obj-elf.h: Likewise.
        * config/obj-som.h: Likewise.
        * config/obj-vms.c: Likewise.
        * config/obj-vms.h: Likewise.
        * config/tc-h8300.h: Likewise.
        * config/tc-ns32k.h: Likewise.
        * config/tc-sparc.h: Likewise.
        * config/tc-tic54x.h: Likewise.
        * config/tc-z8k.h: Likewise.

2000-11-28  Nick Clifton  <nickc@redhat.com>

        * doc/as.1 (COPYING): Mention that the GNU Free Documentation
        License is present in the sources, but not the output, and
        also available from the GNU website.
        (GNU Free Documentation License): Comment out this section.

2000-11-28  Hans-Peter Nilsson  <hp@axis.com>

        * Makefile.am (CPU_OBJ_VALID): Add case to filter out invalid coff
        targets.  Remove i860 from valid a.out targets.
        * Makefile.in: Regenerate.

        * config/tc-cris.c: Include dwarf2dbg.h.
        (md_pseudo_table): Add .file and .loc.
        (md_assemble): Call dwarf2_emit_insn if generating ELF.
        (s_cris_file, s_cris_loc): New.
        * config/tc-cris.h (DWARF2_LINE_MIN_INSN_LENGTH): Define.
        * Makefile.am: Regenerate dependencies.
        * Makefile.in: Regenerate.

2000-11-28  Alan Modra  <alan@linuxcare.com.au>

        * expr.c (STANDARD_MUL_PRECEDENCE): Correct value.
        (MRI_MUL_PRECEDENCE): Likewise.
        (op_rank): Fix a comment typo.

2000-11-26  Stephane Carrez  <Stephane.Carrez@worldnet.fr>

        * config/tc-m68hc11.c (build_indexed_byte): Print the offset in
        the error message.
        (get_operand): Fix analysis for movw/movb instructions.

2000-11-24  Nick Clifton  <nickc@redhat.com>

        * configure.in (xscale-elf): Add target.
        (xscale-coff): Add target.
        * configure: Regenerate.

        * config/tc-arm.c (ARM_EXT_V5E): New ARM architecture
        extenstion.
        (ARM_EXT_XSCALE): New ARM architecture extension.
        (ARM_LONGMUL): Rename to ARM_EXT_LONGMUL.
        (ARM_HALFWORD): Rename to ARM_EXT_HALFWORD.
        (ARM_THUMB): Rename to ARM_EXT_THUMB.
        (ARM_ARCH_V4): Remove processor from architecture.
        (ARM_ARCH_3M): New architecutre definition.
        (ARM_ARCH_V5TE): New architecutre definition.
        (ARM_ARCH_XSCALE): New architecutre definition.
        (CPU_DEFAULT): Allow to be defaulted to XScale.
        (atpcs): New boolean variable.
        (ldr_flags): Support 'd' flag for double word loads.
        (str_flags): Support 'd' flag for double word stored.
        (do_mia): New function.
        (do_mar): New function.
        (do_mra): New function.
        (do_pld): New function.
        (do_ldrd): New function.
        (do_blx): New function.
        (do_bkpt): New function.
        (do_clz): New function.
        (do_lstc2): New function.
        (do_cdp2): New function.
        (do_t_blx): New function.
        (do_t_bkpt): New function.
        (do_smla): New function.
        (do_smlal): New function.
        (do_smul): New function.
        (do_qadd): New function.
        (do_co_reg2c): New function.
        (LONGEST_INSN): Redefine to 7.

        * doc/c-arm.texi: Document -mxscale, -mmarmv5te and -matpcs
        command line switches.

2000-11-22  Jim Wilson  <wilson@redhat.com>

        * config/tc-ia64.c (pseudo_func): Add missing initializers.
        (struct rsrc): Make line unsigned.
        (gr_values): Add missing initializer.
        (SLOT_NUM_NOT_SET): Add unsigned cast.
        (ia64_elf_section_flags, output_vbyte_mem, count_output, dot_radix,
        dot_fframe, dot_vframe, dot_vframesp, dot_vframepsp, dot_save,
        dot_restore, dot_restorereg, dot_restorereg_p, dot_handlerdata,
        dot_unwentry, dot_altrp, dot_saveg, dot_savef, dot_saveb, dot_savegf,
        dot_spill, dot_spillreg, dot_spillreg_p, dot_label_state,
        dot_copy_state, dot_unwabi, dot_personality, dot_proc, dot_body,
        dot_prologue, dot_endp, dot_regstk, dot_psr, dot_alias, dot_ln,
        dot_reg_val, dot_entry, dot_mem_offset, ia64_init, mark_resource,
        md_undefined_symbol, md_apply_fix3, tc_gen_reloc, ia64_md_do_align):
        Add ATTRIBUTE_UNUSED to unused parameters.
        (convert_expr_to_ab_reg): Add parens.
        (convert_expr_to_xy_reg): Add parens.  Comment out >= REG_GR test.
        (dot_prologue): Initialize grsave when declared.
        (md_pseudo_table): Add missing initializers.
        (operand_match): Add casts to bfd_vma.
        (emit_one_bundle): Delete unused local prev.  Make required_template
        unsigned.
        (specify_resource): Cast i to unsigned.
        (note_register_values): Use fprintf_vma.
        (print_dependency): Likewise.

2000-11-21  Jim Wilson  <wilson@redhat.com>

        * config/tc-ia64.c (generate_unwind_image): Call record_alignment
        for unwind info section.
        (dot_endp): Likewise for unwind section.

        * config/tc-ia64.c (emit_one_bundle): Pass size of 8 not 4 to
        fix_new_exp.

2000-11-21  Jakub Jelinek  <jakub@redhat.com>

        * config/tc-sparc.c (md_pseudo_table): Add .file and .loc.
        (output_insn): Call dwarf2_emit_insn.
        * config/tc-sparc.h (DWARF2_LINE_MIN_INSN_LENGTH): New.

2000-11-17  Richard Henderson  <rth@redhat.com>

        * ehopt.c (eh_frame_code_alignment): New arg `in_seg', update all
        callers.  Don't switch segments.  Expect CIE == -1 in .debug_frame.
        (check_eh_frame): Handle .eh_frame and .debug_frame concurrently.

2000-11-17  Nick Clifton  <nickc@redhat.com>

        * config/tc-arm.c (md_pseudo_table): Add support for .line and
        .file pseudo ops.

2000-11-17  Richard Henderson  <rth@redhat.com>

        * config/tc-i386.c (md_pseudo_table): Add .file and .loc.

2000-11-17  Richard Henderson  <rth@redhat.com>

        * dwarf2dbg.c (dwarf2_gen_line_info): Early out for no line number.
        * config/obj-elf.h (ECOFF_DEBUGGING) [TC_ALPHA]: Adjust for
        tri-state definition of alpha_flag_mdebug.
        * config/tc-alpha.c (alpha_flag_mdebug): Init to -1.
        (s_alpha_file): Store first .file directive.
        (s_alpha_stab): New.
        (md_pseudo_table): Add stabs and stabn.

2000-11-17  Richard Henderson  <rth@redhat.com>

        * config/tc-i386.c (md_assemble): Call dwarf2_emit_insn.

2000-11-17  Richard Henderson  <rth@redhat.com>

        * as.c (debug_type): Init to DEBUG_UNSPECIFIED.
        (main): Call dwarf2_finish.
        * as.h (debug_type): Clarify documentation of the meaning
        of this variable.
        * dwarf2dbg.c (DWARF2_LINE_MIN_INSN_LENGTH): Default to 1.
        (print_stats): Fix parenthesis problem.
        (now_subseg_size): New.
        (dwarf2_finish): Use it.  If DEBUG_DWARF2, emit bits for .debug_info.
        (dwarf2_directive_file): Don't set debug_type.
        (dwarf2_where): Honor DEBUG_DWARF2 first.
        (dwarf2_emit_insn): Renamed from dwarf2_generate_asm_lineno;
        do nothing if not emitting dwarf2 debug info, or no work.
        * dwarf2dbg.h (dwarf2_emit_insn): Update.
        * ecoff.c (add_file): Turn on DEBUG_ECOFF only if DEBUG_UNSPECIFIED.
        (ecoff_new_file): Likewise.
        * read.c (generate_lineno_debug): Kill ecoff hackery.  Update
        commentary wrt dwarf2.

        * config/tc-alpha.c (alpha_adjust_symtab_relocs): Add
        ATTRIBUTE_UNUSED as needed.
        (emit_insn): Call dwarf2_emit_insn.
        (s_alpha_file): New.
        (s_alpha_loc): New.
        (s_alpha_coff_wrapper): Don't handle them.
        (md_pseudo_table): Update for .file and .loc.
        * config/tc-alpha.h (DWARF2_LINE_MIN_INSN_LENGTH): New.

        * config/tc-arm.c (output_inst): Update for dwarf2_emit_insn;
        don't protect with debug_type.
        * config/tc-hppa.c (md_assemble): Likewise.
        * config/tc-m68hc11.c (m68hc11_new_insn): Likewise.
        * config/tc-mn10300.c (md_assemble): Likewise.
        * config/tc-sh.c (md_assemble): Likewise.
        * config/tc-v850.c (md_assemble): Likewise.

        * config/tc-arm.c (arm_end_of_source): Remove.
        * config/tc-hppa.c (pa_end_of_source): Remove.
        * config/tc-m68hc11.c (m68hc11_end_of_source): Remove.
        * config/tc-mn10300.c (mn10300_finalize): Remove.
        * config/tc-sh.c (sh_finalize): Remove.
        * config/tc-v850.c (sh_finalize): Remove.

        * config/tc-arm.h (md_end): Remove.
        * config/tc-hppa.h (md_end): Remove.
        (DWARF2_LINE_MIN_INSN_LENGTH): New.
        * config/tc-m68hc11.h (md_end): Remove.
        * config/tc-mn10300.h (md_end): Remove.
        * config/tc-sh.h (md_end): Remove.
        * config/tc-v850.h (md_end): Remove.

        * config/tc-ia64.c (emit_one_bundle): Don't protect
        dwarf2 bits with debug_type.
        (md_assemble): Likewise.
        (ia64_end_of_source): Don't call dwarf2_finish.

2000-11-16  Jim Wilson  <wilson@redhat.com>

        * config/tc-ia64.c (errata_nop_necessary_p): Abort if general regno
        >= 128 instead of > 128.  Abort if predicate regno is >= 64 instead of
        > 16.

2000-11-16  H.J. Lu  <hjl@gnu.org>

        * config/obj-elf.c (obj_elf_symver): Don't check the missing
        version name.

2000-11-15  Kazu Hirata  <kazu@hxi.com>

        * config/tc-tic30.c: Fix formatting.
        * config/tc-tic80.c: Likewise.
        * config/tc-v850.c: Likewise.
        * config/tc-vax.c: Likewise.
        * config/tc-w65.c: Likewise.
        * config/tc-z8k.c: Likewise.

2000-11-14  DJ Delorie  <dj@redhat.com>

        * config/tc-v850.c: Support dwarf2.
        * config/tc-v850.h: Ditto.

        * config/tc-v850.c (cons_fix_new_v850): Don't rely on
        parse_cons_expression_v850 to initialize hold_cons_reloc.

2000-11-15  Bernd Schmidt  <bernds@redhat.com>

        * config/tc-ia64.c (struct md): New entries LAST_GROUPS, GROUP_IDX.
        (errata_nops_necessary_p): New function.
        (emit_one_bundle): Call it.  Update the GROUP_IDX field in struct
        md.

2000-11-14  Jim Wilson  <wilson@redhat.com>

        * config/tc-ia64.c (ia64_target_format): If EF_IA_64_BE not set, then
        return little endian bfd formats.

2000-11-14  Kazu Hirata  <kazu@hxi.com>

        * config/aout_gnu.h: Fix formatting.
        * config/atof-vax.c: Likewise.
        * config/m68k-parse.h: Likewise.
        * config/m88k-opcode.h: Likewise.
        * config/obj-elf.c: Likewise.
        * config/tc-arm.c: Likewise.
        * config/tc-cris.c: Likewise.
        * config/tc-i386.c: Likewise.
        * config/tc-ia64.c: Likewise.
        * config/tc-mn10300.c: Likewise.
        * config/te-386bsd.h: Likewise.
        * config/te-hppa.h: Likewise.
        * config/te-nbsd.h: Likewise.
        * config/te-ppcnw.h: Likewise.
        * config/te-sparcaout.h: Likewise.
        * config/te-tmips.h: Likewise.
        * config/vax-inst.h: Likewise.
        * config/vms-conf.h: Likewise.

2000-11-14  Jakub Jelinek  <jakub@redhat.com>

        * config/tc-alpha.c (s_alpha_prologue): Preserve visibility bits.

2000-11-13  H.J. Lu  <hjl@gnu.org>

        * config/obj-elf.c (elf_frob_symbol): Support
        ".symver name,name2@@@nodename".
        (elf_frob_file_before_adjust): Likewise.

        * doc/as.texinfo: Updated for ".symver name,name2@@@nodename"
        and ".symver name,name2@@@nodename".
        Fix a typo.

2000-11-12  H.J. Lu  (hjl@gnu.org)

        * config/obj-elf.c (obj_elf_symver): Check missing version
        name.

2000-11-12  H.J. Lu  (hjl@gnu.org)

        * dwarf2dbg.c (dwarf2_generate_asm_lineno): Use addressT
        instead of bfd_vma for non-bfd assemblers.

2000-11-09  Kazu Hirata  <kazu@hxi.com>

        * itbl-ops.c: Fix comment typos.

2000-11-08  Jim Wilson  <wilson@redhat.com>

        * config/tc-ia64.c (struct unw_rec_list): Add slot_frag field.
        (struct unwind): Add next_slot_frag field.
        (slot_index): New parameters slot_frag and first_frag.  Add code
        to add in frag sizes when different.  Add comments.
        (fixup_unw_records): New locals first_frag and last_frag.  Pass new
        arguments to slot_index.
        (emit_one_bundle): Set slot_frag field.  Set next_slot_number after
        loop end.  Set next_slot_frag field.

2000-11-07  H.J. Lu  <hjl@gnu.org>

        * doc/as.texinfo (.symver): Updated for versioned symbol
        reference.

        * obj.h (format_ops): Add the frob_file_before_adjust field.

        * config/obj-aout.c (aout_format_ops): Set the
        frob_file_before_adjust field to 0.
        * config/obj-coff.c (coff_format_ops): Likewise.
        * config/obj-ecoff.c (ecoff_format_ops): Likewise.

        * config/obj-elf.c (obj_elf_symver): Allow duplicated version
        name.
        (elf_frob_file_before_adjust): New function to remove unneeded
        versioned symbols from the symbol table.
        (elf_format_ops): Set the frob_file_before_adjust field to
        elf_frob_file_before_adjust.

        * config/obj-elf.h (obj_frob_file_before_adjust): Defined if
        not defined.

        * config/obj-multi.h (obj_frob_file_before_adjust): Defined.

2000-11-07  Peter Targett  <peter.targett@arccores.com>

        * config/tc-arc.h: Avoid warnings for LITTLE_ENDIAN and
        BIG_ENDIAN macros.
        * config/tc-arc.c: Use S_IS_LOCAL to test local symbols.
        Fix compile time warning messages.

2000-11-07  Nick Clifton  <nickc@redhat.com>

        * stabs.c (generate_asm_file): Increase length of xmalloc'ed
        buffer in order to avoid buffer overflows.

2000-11-06  Steve Ellcey <sje@cup.hp.com>

        * config/tc-ia64.c (md_shortopts, md_parse_option, md_show_usage):
        Change M to m for -milp32 or -mlp64 to match gcc.
        (dot_endp): Use bytes_per_address instead of 8.
        (emit_one_bundle): Use number_to_chars_littleendian instead of
        md_number_to_chars.
        (fix_insn): Likewise.
        (ia64_init): New function.
        (ia64_target_format): New function.
        (md_begin): Set endianness, arch, and machine as appropriate.
        * config/tc-ia64.h: (TARGET_BYTES_BIG_ENDIAN, md_number_to_chars):
        Make these macros depend on TE_HPUX macro.
        (TARGET_FORMAT): Define.
        (HOST_SPECIAL_INIT): Define.
        * config/te-hpux.h: New file.
        * configure.in: Add "ia64-*-hpux*" target to configure.
        * configure: Regenerate.

2000-11-06  Kazu Hirata  <kazu@hxi.com>

        * as.c: Fix formatting.
        * dwarf2dbg.c: Likewise.
        * input-file.c: Likewise.
        * input-file.h: Likewise.
        * input-scrub.c: Likewise.
        * itbl-ops.c: Likewise.
        * listing.c: Likewise.
        * macro.h: Likewise.
        * messages.c: Likewise.
        * read.c: Likewise.
        * subsegs.c: Likewise.
        * subsegs.h: Likewise.
        * write.c: Likewise.

2000-11-06  Nick Clifton  <nickc@redhat.com>

        * doc/as.texinfo: Add GNU Free Documentation License.
        * doc/gasp.texi:  Add GNU Free Documentation License.
        * doc/as.1:  Add GNU Free Documentation License.

2000-11-05  Nick Clifton  <nickc@redhat.com>

        * config/tc-arm.c: Add include of "dwarf2dbg.h"

2000-11-02  Per Lundberg  <plundis@chaosdev.org>

        * configure.in: Recognise i[3456]86-chaosdev-storm-chaos.
        * configure: Regenerate.

2000-11-01  Nick Clifton  <nickc@redhat.com>

        * read.c (original_case_string): New global variable.
        (read_a_source_file): Copy opcode string into
        original_case_string if clobbering the case of the opcode.
        * read.h: Export the definition of original_case_string.
        * config/tc-arm.c (md_assembler): When parsing a .req
        directive use the original opcode string, not the case
        clobbered version.

2000-11-02  Nick Clifton  <nickc@redhat.com>

        * config/tc-mn10300.c (debug_line): Remove this static
        variable.
        (md_assemble): Call dwarf2_generate_asm_lineno instead of
        dwarf2_where and dwarf2_gen_line_info.

2000-11-02  Theo Honohan  <th@futuretv.com>

        * config/tc-arm.c (do_msr): Improve error message.

2000-10-31  Eric Christopher  <echristo@redhat.com>

        * config/tc-mn10300.c (md_apply_fix3): Use valuep if fully resolved
        or pc-relative, else use fx_offset.

2000-10-31  Jim Wilson  <wilson@redhat.com>

        * config/tc-ia64.c (struct md): New field tag_fixups.
        (ia64_flush_insns): Handle tag_fixups.  Error if dangling
        qualifying predicate.
        (emit_one_bundle): Delete spurious multiplication by one.  Handle
        tag_fixups.
        (ia64_start_line): Error if dangling qualifying predicate.
        (defining_tag): New static variable.
        (ia64_unrecognized_line, case '['): Parse tags.
        (ia64_frob_label): Create tag_fixups.
        (md_assemble): Reset md.qp.X_op after using it.

2000-10-31  Kaz Kojima <kkojima@rr.iij4u.or.jp>

        * config/tc-sh.c (md_apply_fix [BFD_RELOC_SH_PCDISP12BY2]): Allow 4094.

2000-10-31  Bernd Schmidt  <bernds@redhat.co.uk>

        * config/tc-ia64.c (extra_goodness): Only prefer F in slot 1 and B in slot 2.

2000-10-30  Kazu Hirata  <kazu@hxi.com>

        * expr.c: Fix formatting.
        * flonum-copy.c: Likewise.
        * flonum.h: Likewise.
        * gasp.c: Likewise.
        * hash.c: Likewise.

2000-10-30  Hans-Peter Nilsson  <hp@bitrange.com>

        * as.h (OPTION_MD_BASE): Bump to 190.
        * as.c (parse_args) <std_longopts>: Add comment about the need to
        check OPTION_MD_BASE in as.h.

        * config/tc-sh.c (md_apply_fix): For ELF, do not "adjust back" VAL
        for weak symbols.

2000-10-27  Nick Clifton  <nickc@redhat.com>

        * configure.in (emulations): Add m68hc12.
        * configure: Regenerate.
        * po/gas.pot: Regenerate.

2000-10-27  Aldy Hernandez  <aldyh@redhat.com>

        * config/tc-arm.c (psrs): Remove lowercase versions of spsr* and
        cpsr*.
        (arm_psr_parse): Handle lowercase CPSR and SPSR.

2000-10-25  Nick Clifton  <nickc@redhat.com>

        * dwarf2out.c (dwarf2_generate_asm_lineno): New function: Generate
        a DWARF2 line number information sequence.

        *dwarf2out.h: Add prototype for dwarf2_generate_asm_lineno.

        * read.c (generate_lineno_debug): Update comment describing why
        DWARF2 line number debug information is not generated
        automatically by this function.

        * doc/as.texinfo: Note that --gdwarf2 only works on some targets,
        not all.

        * config/tc-arm.h (md_end): Define.
        (DWARF2_LINE_MIN_INSN_LENGTH): Define.

        * config/tc-arm.c (output_inst): Call dwarf2_generate_asm_lineno
        if generating DWARF2 line numbers.
        (arm_end_of_source): New function.  Call dwarf2_finish if
        necessary.

        * config/tc-hppa.c (md_assemble): Use dwarf2_generate_asm_lineno.
        * config/tc-m68hc11.c (m68hc11_new_insn): Use dwarf2_generate_asm_lineno.
        * config/tc-sh.c (md_assemble): Use dwarf2_generate_asm_lineno.

2000-10-25  Diego Novillo  <dnovillo@cygnus.com>

        * config/tc-i386.c: Fix prototype declarations for functions taking no
        arguments.

2000-10-24  Diego Novillo  <dnovillo@cygnus.com>

        * config/tc-i386.c (i386_operand_modifier): Remove.
        (build_displacement_string): Remove.
        (i386_parse_seg): Remove.
        (i386_intel_memory_operand): Remove.
        (i386_intel_operand): Re-write using recursive descent parser based
        on MASM documentation.
        (struct intel_parser_s): New structure.
        (intel_parser): New static variable.
        (struct intel_token): New structure.
        (cur_token, prev_token): New static variables.
        (T_NIL): Define.
        (T_CONST): Define.
        (T_REG): Define.
        (T_BYTE): Define.
        (T_WORD): Define.
        (T_DWORD): Define.
        (T_QWORD): Define.
        (T_XWORD): Define.
        (T_SHORT): Define.
        (T_OFFSET): Define.
        (T_PTR): Define.
        (T_ID): Define.
        (intel_match_token): New function.
        (intel_get_token): New function.
        (intel_putback_token): New function.
        (intel_expr): New function.
        (intel_e05): New function.
        (intel_e05_1): New function.
        (intel_e06): New function.
        (intel_e06_1): New function.
        (intel_e09): New function.
        (intel_e09_1): New function.
        (intel_e10): New function.
        (intel_e10_1): New function.
        (intel_e11): New function.

2000-10-20  Jakub Jelinek  <jakub@redhat.com>

        * config/tc-sparc.c (sparc_ip): Fix a bug which caused v9_arg_p
        instructions to loose any special insn->architecture mask.

        * config/tc-sparc.c (v9a_asr_table): Add v9b ASRs.
        (sparc_md_end, sparc_arch_types, sparc_arch,
        sparc_elf_final_processing): Handle v8plusb and v9b architectures.
        (sparc_ip): Handle siam mode operands. Support v9b ASRs (and
        request v9b architecture if they are used).

2000-10-18  Michael Sokolov  <msokolov@ivan.Harhan.ORG>

        * config/tc-m68k.c: Fix the previous misapplied patch.

2000-10-18  Michael Sokolov  <msokolov@ivan.Harhan.ORG>

        * config/tc-m68k.h (RELAX_RELOC_*): New definitions for both
        BFD_ASSEMBLER and !BFD_ASSEMBLER.
        * config/tc-m68k.c (md_convert_frag_1): Use them instead of
        BFD_RELOC_*.

2000-10-17  Kazu Hirata  <kazu@hxi.com>

        * debug.c: Fix formatting.
        * depend.c: Likewise.
        * dwarf2dbg.c: Likewise.
        * dwarf2dbg.h: Likewise.
        * ecoff.c: Likewise.
        * expr.c: Likewise.
        * expr.h: Likewise.
        * flonum-konst.c: Likewise.
        * frags.h: Likewise.

2000-10-17  Chandrakala Chavva  <cchavva@redhat.com>

        * as.c: New option OPTION_TARGET_HELP. Prints all target specific
        options.
        * doc/as.texinfo: Added notes about this new option.

2000-10-16  Hans-Peter Nilsson  <hp@bitrange.com>

        * config/tc-sh.c (JREG): Remove.
        (md_convert_frag): Remove #if 0:d code using JREG.

2000-10-15  Diego Novillo  <dnovillo@cygnus.com>

        * config/tc-i386.c (i386_operand_modifier): Only match
        modifiers SHORT and FLAT if they are followed by a space.
        (parse_register): When `allow_naked_reg' is set, do not confuse
        identifiers that start with a register name with a register.

2000-10-12  Kazu Hirata  <kazu@hxi.com>

        * app.c: Fix formatting.
        * as.c: Likewise.
        * as.h: Likewise.
        * bit_fix.h: Likewise.
        * cgen.c: Likewise.
        * cgen.h: Likewise.
        * cond.c: Likewise.

2000-10-11  Alan Modra  <alan@linuxcare.com.au>

        * config/obj-elf.c (elf_frob_symbol): Revert 2000-10-07 change.

2000-10-07  Alan Modra  <alan@linuxcare.com.au>

        * config/tc-hppa.c (md_apply_fix): Remove plainly wrong assert.
        Re-arrange function a little and improve error message.

        * write.c (write_relocs): Fix a comment.

        * config/obj-elf.c (elf_frob_symbol): Make section syms global on
        link-once sections.

2000-10-05  Jim Wilson  <wilson@cygnus.com>

        * config/tc-ia64.c (resources_match): Handle IA64_RS_PRr.

2000-10-05  Alan Modra  <alan@linuxcare.com.au>

        * config/tc-i386.c: Delete some useless comments, reformat others.

        * config/tc-i386.h (TC_FIX_ADJUSTABLE): Add check to cover
        non-global syms in linkonce sections.

2000-10-04  Ralf Baechle  <ralf@gnu.org>

        * config/tc-ia64.c (operand_match): Don't use // style comments.
        * config/tc-i370.c: Likewise.

2000-09-29  Hans-Peter Nilsson  <hp@axis.com>

        Changes to handle varying register prefix and user symbol prefix.
        * config/tc-cris.c (SYNTAX_RELAX_REG_PREFIX,
        SYNTAX_ENFORCE_REG_PREFIX, SYNTAX_USER_SYM_LEADING_UNDERSCORE,
        SYNTAX_USER_SYM_NO_LEADING_UNDERSCORE, REGISTER_PREFIX_CHAR): New.
        (s_syntax, cris_force_reg_prefix, cris_relax_reg_prefix,
        cris_sym_leading_underscore, cris_sym_no_leading_underscore): New.
        (demand_register_prefix): New variable.
        (md_pseudo_table): New pseudo ".syntax".
        (md_longopts): New options --no-underscore and --underscore.
        (cris_target_format): Return elf32-us-cris or elf32-cris depending
        on symbols_have_leading_underscore.
        (get_gen_reg): Accept or require REGISTER_PREFIX_CHAR.
        (get_spec_reg): Ditto.
        (cris_number_to_imm) <case BFD_RELOC_VTABLE_ENTRY>: Remove FIXME.
        Fix formatting.
        (md_parse_option) <case 'h' 'H'>: Deprecate; add reference to
        --help.
        <case OPTION_NO_US, case OPTION_US>: New.
        (md_show_usage): Be brief and reformat to match continuation of
        --help.
        * po/gas.pot: Regenerate.

2000-09-28  Alan Modra  <alan@linuxcare.com.au>

        * config/tc-hppa.c (hppa_force_relocation): If OBJ_SOM, don't
        force relocs for 12 bit branches.
        (md_apply_fix): Similarly, adjust logic here.

2000-09-28  Alan Modra  <alan@linuxcare.com.au>

        * config/tc-hppa.c (md_apply_fix): Add fmt assertion.  Don't
        adjust for external and weak syms as we will use a reloc.  Allow
        for +8 offset when calculating limits of branches.
        (hppa_fix_adjustable): Undo 2000-09-23 change.
        (hppa_force_relocation): Likewise.  Add fx_addsy assertion.
        Correct distance calculation.
        (tc_gen_reloc): Print the file name and line number if we can't
        handle a fixup.

        From John David Anglin <dave@hiauly1.hia.nrc.ca>
        * config/tc-hppa.c (nonzero_dibits): Define.
        (arg_reloc_stub_needed): Check each arg and return value
        separately for zero case.
        (pa_align): Declare argument `bytes'.

2000-09-25  Kazu Hirata  <kazu@hxi.com>

        * config/tc-cris.c: Fix formatting.
        * config/tc-d10v.h: Likewise.
        * config/tc-d30v.c: Likewise.
        * config/tc-d30v.h: Likewise.
        * config/tc-fr30.c: Likewise.
        * config/tc-fr30.h: Likewise.
        * config/tc-m68k.c: Likewise.
        * config/tc-m68k.h: Likewise.
        * config/tc-pj.h: Likewise.
        * config/tc-ppc.c: Likewise.
        * config/tc-ppc.h: Likewise.
        * config/tc-sh.c: Likewise.
        * config/tc-sh.h: Likewise.
        * config/tc-sparc.c: Likewise.
        * config/tc-v850.h: Likewise.
        * config/tc-vax.h: Likewise.
        * config/tc-w65.h: Likewise.
        * config/tc-z8k.h: Likewise.

2000-09-23  Alan Modra  <alan@linuxcare.com.au>

        * config/tc-hppa.c (hppa_fix_adjustable): Do the external and weak
        checks only for ELF.
        (hppa_force_relocation): Likewise.

2000-09-22  Jim Wilson  <wilson@cygnus.com>

        * config/tc-ia64.c (dv_sem): Add "stop".
        (specify_resource, case IA64_RS_PR): Only handles regs 1 to 15 now.
        (specify_resource, case IA64_RS_PRr): New for regs 16 to 62.
        (specify_resource, case IA64_RS_PR63): Reorder (note == 7) test to
        match above.
        (mark_resources): Check IA64_RS_PRr.

2000-09-22  Michael Sokolov  <msokolov@ivan.Harhan.ORG>

        * config/tc-m68k.c (md_relax_table, m68k_ip, md_convert_frag_1,
        md_estimate_size_before_relax): Redesign and clean up the
        relaxation mechanism.

2000-09-21  Kazu Hirata  <kazu@hxi.com>

        * config/tc-ns32k.c: Fix formatting.
        * config/tc-ns32k.h: Likewise.

2000-09-20  Kazu Hirata  <kazu@hxi.com>

        * config/tc-m32r.c: Fix formatting.
        * config/tc-m32r.h: Likewise.
        * config/tc-m68851.h: Likewise.
        * config/tc-m68hc11.c: Likewise.
        * config/tc-m68hc11.h: Likewise.
        * config/tc-m88k.c: Likewise.
        * config/tc-mcore.c: Likewise.
        * config/tc-mcore.h: Likewise.
        * config/tc-mips.c: Likewise.
        * config/tc-mips.h: Likewise.
        * config/tc-mn10200.h: Likewise.
        * config/tc-mn10300.h: Likewise.
        * config/tc-tahoe.c: Likewise.
        * config/tc-tahoe.h: Likewise.

2000-09-19  Michael Sokolov  <msokolov@ivan.Harhan.ORG>

        * config/tc-vax.c (synthetic_votstrs): Remove jbssi and jbcci.
        Likewise in relaxation description comments.

2000-09-18  Alan Modra  <alan@linuxcare.com.au>

        * config/tc-hppa.h (TC_FORCE_RELOCATION_SECTION): Allow
        subtraction of two syms without emitting a relocation.

        From  David Huggins-Daines  <dhd@linuxcare.com>
        * config/tc-hppa.c (hppa_force_relocation): Force relocations for
        global or weak symbols.

2000-09-15  Kazu Hirata  <kazu@hxi.com>

        * config/tc-h8300.h: Fix formatting.
        * config/tc-h8500.c: Likewise.
        * config/tc-h8500.h: Likewise.
        * config/tc-hppa.h: Likewise.
        * config/tc-i370.h: Likewise.
        * config/tc-i386.h: Likewise.
        * config/tc-i860.c: Likewise.
        * config/tc-i860.h: Likewise.
        * config/tc-i960.h: Likewise.
        * config/tc-ia64.c: Likewise.
        * config/tc-ia64.h: Likewise.

2000-09-14  Kazu Hirata  <kazu@hxi.com>

        * config/tc-a29k.c: Fix formatting.
        * config/tc-alpha.c: Likewise.
        * config/tc-arc.c: Likewise.
        * config/tc-arc.h: Likewise.
        * config/tc-arm.c: Likewise.
        * config/tc-arm.h: Likewise.
        * config/tc-avr.c: Likewise.
        * config/tc-avr.h: Likewise.
        * config/tc-tic30.c: Likewise.
        * config/tc-tic30.h: Likewise.
        * config/tc-tic54x.c: Likewise.
        * config/tc-tic54x.h: Likewise.
        * config/tc-tic80.c: Likewise.
        * config/tc-tic80.h: Likewise.

2000-09-14  Timothy Wall  <twall@cygnus.com>

        * config/tc-ia64.c (specify_resource): For PR%/PR63, note types of
        parallel comparisons for later use.
        (struct rsrc): Add parallel comparison type.
        (resources_match): Skip special cases of PR usage (non-conflicting
        parallel compares).

2000-09-13  Kazu Hirata  <kazu@hxi.com>

        * config/obj-ecoff.c: Fix formatting.
        * config/obj-elf.c: Likewise.
        * config/obj-elf.h: Likewise.
        * config/obj-evax.h: Likewise.
        * config/obj-generic.h: Likewise.
        * config/obj-hp300.c: Likewise.
        * config/obj-hp300.h: Likewise.
        * config/obj-ieee.h: Likewise.
        * config/obj-vms.c: Likewise.
        * config/obj-vms.h: Likewise.

2000-09-13  Anders Norlander  <anorland@acc.umu.se>

        * config/tc-mips.c (md_begin): Recognize 4Kc, 4Km and 4Kp processors.
        (md_parse_option): Ditto.
        (md_longopts): Add -mips32 option.
        (md_show_usage): Document new options.
        (mips_ip): Assemble sdbbp 20 bit 'm' args for MIPS32.
        (mips_ip): Assemble mfc0 with a sub-selection code.
        (validate_mips_insn): Handle 'H' (OP_*_SEL) and 'm' (OP_*_CODE20).
        (mips_cpu_to_str): New function.
        (mips_ip): Use mips_cpu_to_str instead of printing numeric cpu value.
        Use CPU_* defines instead of hardcoded numbers.

        * doc/as.texinfo: Document new options.
        * doc/c-mips.texi: Ditto.

2000-09-12  Kazu Hirata  <kazu@hxi.com>

        * as.h: Fix formatting.
        * asintl.h: Likewise.
        * bit_fix.h: Likewise.
        * config/obj-aout.c: Likewise.
        * config/obj-aout.h: Likewise.
        * config/obj-bout.c: Likewise.
        * config/obj-bout.h: Likewise.
        * config/obj-coff.c: Likewise.
        * config/obj-coff.h: Likewise.
        * dwarf2dbg.h: Likewise.
        * expr.h: Likewise.
        * flonum.h: Likewise.
        * frags.h: Likewise.
        * itbl-ops.h: Likewise.
        * macro.h: Likewise.
        * read.h: Likewise.
        * sb.h: Likewise.
        * struc-symbol.h: Likewise.
        * subsegs.h: Likewise.
        * symbols.h: Likewise.
        * tc.h: Likewise.
        * write.h: Likewise.

2000-09-11  Kazu Hirata  <kazu@hxi.com>

        * bignum-copy.c: Fix formatting.
        * config/tc-i370.c: Likewise.
        * config/tc-i960.c: Likewise.
        * config/tc-m68k.c: Likewise.
        * ehopt.c: Likewise.
        * flonum-copy.c: Likewise.
        * flonum-konst.c: Likewise.
        * flonum-mult.c: Likewise.
        * literal.c: Likewise.
        * read.c: Likewise.
        * sb.c: Likewise.
        * stabs.c: Likewise.
        * subsegs.c: Likewise.

2000-09-09  Philip Blundell  <philb@gnu.org>

        * configure.in (arm*-*-uclinux*): New target.
        * configure: Regenerate.

2000-09-09  Kazu Hirata  <kazu@hxi.com>

        * input-file.c: Fix formatting.
        * itbl-ops.c: Likewise.
        * messages.c: Likewise.

2000-09-08  Philip Blundell  <philb@gnu.org>

        * config/tc-arm.c (md_apply_fix3): Correct handling of ADRL when
        offset is negative.

2000-09-07  H.J. Lu  <hjl@gnu.org>

        * configure.in (AC_ISC_POSIX): Put after AC_CANONICAL_SYSTEM.
        * configure: Rebuild.

2000-09-07  Kazu Hirata  <kazu@hxi.com>

        * atof-generic.c: Fix formatting.
        * config/tc-mips.c: Likewise.
        * config/tc-vax.c: Likewise.
        * input-scrub.c: Likewise.

2000-09-07  Alexandre Oliva  <aoliva@redhat.com>

        * config/tc-sh.h (TARGET_FORMAT): Use sh-linux targets.
        * configure.in (sh-*-linux*): Added.
        * configure: Rebuilt.

2000-09-06  Kazu Hirata  <kazu@hxi.com>

        * config/tc-hppa.c: Fix formatting.

        * ecoff.c: Fix formatting.

2000-09-06  Alexandre Oliva  <aoliva@redhat.com>

        * configure: Rebuilt with new libtool.m4.

2000-09-05  Kazu Hirata  <kazu@hxi.com>

        * cgen.c: Fix formatting.
        * config/tc-ia64.c: Likewise.

2000-09-05  Nick Clifton  <nickc@redhat.com>

        * aclocal.m4: Regenerate.
        * config.in: Regenerate.
        * configure: Regenerate.
        * po/gas.pot: Regenerate.

2000-09-05  Hans-Peter Nilsson  <hp@axis.com>

        * config/tc-cris.c: Correct comment typos.

2000-09-05  Eric Christopher  <echristo@cygnus.com>

        * config/tc-mn10300.c: Cleanup.
        (md_pcrel_from): Enable.

2000-09-05  Alan Modra  <alan@linuxcare.com.au>

        * expr.c (operand): Fix a comment typo.
        * write.c (write_relocs): Fix a signed/unsigned warning.

        * config/tc-hppa.c (fudge_reg_expressions): New
        (hppa_force_reg_syms_absolute): New.
        (pa_equ): Allow reg_section expressions.
        * config/tc-hppa.c (md_optimize_expr): Define.
        (hppa_force_reg_syms_absolute): Prototype.

        * config/tc-hppa.c (pa_11_fp_reg_struct): Delete.
        (pa_parse_number): Pass in arg to select fp reg parsing.
        Return 1 to indicate format checks pass.  If strict, then only
        accept a register or register symbol.  Return value in...
        (pa_number): New static for pa_parse_number.
        (FP_REG_BASE): Define.
        (FP_REG_RSEL): Define.
        (pre_defined_registers): Apply FP_REG_BASE and FP_REG_RSEL as
        appropriate.  White space changes.
        (need_pa11_opcode): Don't bother passing any params, get them from
        globals instead.
        (pa_ip): Modify all calls to pa_parse_number and need_pa11_opcode.
        Remove extraneous check in case 'Q'.
        (pa_equ): Modify call to pa_parse_number to do strict parsing. If
        reg, set section of resulting symbol to reg_section.
        (pa_parse_space_stmt): Modify call to pa_parse_number.
        (pa_space): Likewise.

        * config/tc-hppa.c: (md_apply_fix): Handle vtable relocs.
        (hppa_force_relocation): Handle vtable relocs.
        (pa_vtable_entry): New.
        (pa_vtable_inherit): New.
        (md_pseudo_table): Add entries for vtable pseudos.
        (hppa_fix_adjustable): Reject reduction of R_PARISC_GNU_VTINHERIT
        and R_PARISC_GNU_VTENTRY relocs.  Reject reduction of relocs
        against weak syms.
        (tc_gen_reloc): Remove ELF_ARG_RELOC_INSN code.
        (pa_type_args): Don't call symbol_get_bfdsym multiple times.
        Set STT_PARISC_MILLICODE for OBJ_ELF when encountering a
        millicode import.
        * config/obj-elf.c (obj_elf_type): Allow md_elf_symbol_type to
        specify a symbol type.

        * config/tc-hppa.h: Reorganize file a little, grouping OBJ_ELF
        dependent things together.
        (md_elf_symbol_type): Define.

        * config/tc-hppa.c (fix_new_hppa): Elide "$PIC_pcrel$0" pseudo
        symbol.
        * config/tc-hppa.h (tc_frob_symbol): Elide "$PIC_pcrel$0" here too.

        * config/obj-elf.h (obj_elf_vtable_inherit): Declare.
        (obj_elf_vtable_entry): Declare.

        * config/obj-elf.c (obj_elf_vtable_inherit): Return struct fix *
        and export function.
        (obj_elf_vtable_entry): Similarly.
        (elf_pseudo_table): Fix the damage with a cast.

2000-09-03  Richard Henderson  <rth@cygnus.com>

        * config/tc-ia64.c (emit_one_bundle): Stop collecting insns
        for template selection when a label is needed.

2000-09-02  Kazu Hirata  <kazu@hxi.com>

        * config/tc-ia64.c: Fix formatting.

2000-09-02  Nick Clifton  <nickc@redhat.com>

        * configure.in: Increase version number to 2.10.91.
        * configure: Regenerate.
        * aclocal.m4: Regenerate.
        * config.in: Regenerate.
        * po/gas.pot: Regenerate.
        * Makefile.in: Regenerate.

2000-09-01  Alexandre Oliva  <aoliva@redhat.com>

        * config/tc-sh.h [OBJ_ELF] (TC_FIX_ADJUSTABLE): Define.
        * config/tc-sh.c (md_apply_fix): Map 32-bit relocations that
        become PC-relative to BFD_RELOC_32_PCREL.  Reject 16- or 8-bit
        similar relocs.
        (sh_obj_adjustable): Return 1 for PC-relative offsets used in
        branches.

2000-09-01  Niibe Yutaka  <gniibe@m17n.org>, Kaz Kojima  <kkojima@rr.iij4u.or.jp>, Alexandre Oliva  <aoliva@redhat.com>

        * config/tc-sh.h (DIFF_EXPR_OK, GLOBAL_OFFSET_TABLE_NAME,
        TC_RELOC_GLOBAL_OFFSET_TABLE, TC_RELOC_RTSYM_LOC_FIXUP): Define.
        * config/tc-sh.c (sh_elf_cons, sh_elf_suffix): New functions.
        [OBJ_ELF] (md_pseudo_table) <long, int, word, short>: Use them.
        (GOT_symbol): New variable.
        (md_undefined_symbol): Set it.

2000-09-01  Richard Henderson  <rth@cygnus.com>

        * config/tc-ia64.c (match): Don't inline.
        (extra_goodness): New.
        (md_begin): Prefer nop.f and nop.b for best_template.

2000-08-31  Kazu Hirata  <kazu@hxi.com>

        * as.c: Fix formatting.
        * cond.c: Likewise.
        * frags.c: Likewise.
        * macro.c: Likewise.

2000-08-31  Eric Christopher  <echristo@cygnus.com>

        * config/tc-mn10300.c:  Cleanup and fix warnings.
        (md_pseudo_table): Add initializers.
        (md_show_usage): Cleanup.
        (md_parse_option): Fix warnings.
        (md_undefined_symbol): Fix warnings.
        (md_conver_frag): Fix warnings.
        (tc_gen_reloc): Fix warnings.
        (md_apply_fix3): Fix warnings.
        (check_operand): Fix warnings.

2000-08-31  Alexandre Oliva  <aoliva@redhat.com>

        * acinclude.m4: Include libtool and gettext macros from the
        top level.
        * aclocal.m4, configure: Rebuilt.

2000-08-30  Mark Hatle  <mhatle@mvista.com>

        * config/tc-ppc.c (md_parse_option): Recognize -m405.

2000-08-31  Kazu Hirata  <kazu@hxi.com>

        * listing.c: Fix formatting.

2000-08-29  Kazu Hirata  <kazu@hxi.com>

        * app.c: Fix a comment typo.  Fix formatting.

2000-08-25  J. David Anglin  <dave@hiauly1.hia.nrc.ca>

        * config/tc-vax.c (md_convert_frag): Correctly calculate the pc relative
        offset of the target destination for jmp instructions.
        (md_assemble): Change mode to VAX_ABSOLUTE_MODE as per comments.

2000-08-24  Hans-Peter Nilsson  <hp@axis.com>

        * NEWS: Mention support for CRIS.

Thu Aug 24 20:41:05 2000  Denis Chertykov  <denisc@overta.ru>

        * config/tc-avr.h (TC_IMPLICIT_LCOMM_ALIGNMENT): New macros.
        Sets `.lcomm' alignment to zero.

2000-08-23  Alexandre Oliva  <aoliva@redhat.com>

        * config/tc-i386.h (OBJ_MAYBE_ELF, OBJ_MAYBE_COFF,
        TC_FIX_ADJUSTABLE): Define.

2000-08-23  Jim Wilson  <wilson@cygnus.com>

        * config/tc-ia64.c (output_unw_records): Set U & E flags only if
        unwind.personality_routine is set.

2000-08-23  H.J. Lu  <hjl@gnu.org>

        * write.c (TC_FIX_ADJUSTABLE): Remove the duplicate.

2000-08-23  Alexandre Oliva  <aoliva@redhat.com>

        * config/tc-i386.h (TC_FIX_ADJUSTABLE): Do *NOT* define if target
        environment is pe.

2000-08-22  H.J. Lu  <hjl@gnu.org>

        * config.in (STRICTCOFF): New for strict COFF.

        * configure.in: Define STRICTCOFF for i386-*-msdosdjgpp*,
        i386-*-go32* and i386-go32-rtems*.
        * configure: Rebuilt.

        * config/obj-coff.c (obj_coff_endef): Follow the historical
        behavior if STRICTCOFF is not defined.

        * doc/internals.texi: Document STRICTCOFF.

2000-08-22  Alexandre Oliva  <aoliva@redhat.com>

        * write.c (TC_FIX_ADJUSTABLE): Define to 1, if not defined.
        (fixup_segment) Use it instead of TC_DONT_FIX_NON_ADJUSTABLE.
        * config/tc-i386.h (TC_DONT_FIX_NON_ADJUSTABLE): Remove.
        <OBJ_ELF, OBJ_COFF, TE_PE> (TC_FIX_ADJUSTABLE): Define.
        * config/tc-arm.h (TC_DONT_FIX_NON_ADJUSTABLE): Remove.
        <OBJ_ELF> (TC_FIX_ADJUSTABLE): Define.
        * config/tc-i960.h, config/tc-m68k.h, config/tc-v850.h:
        Likewise.

2000-08-22  Eric Christopher  <echristo@cygnus.com>

        * config/tc-mn10300.c: (md_apply_fix): New function.
        (mn10300_force_relocation): New function.
        (mn10300_fix_adjustable): New function.

        * config/tc-mn10300.h: (TC_FORCE_RELOCATION): Define.
        (TC_HANDLES_FX_DONE): Define.
        (obj_fix_adjustable): Define.
        (MD_APPLY_FIX3): Define.
        (TC_LINKRELAX_FIXUP): Define.

        * write.c: (TC_LINKRELAX_FIXUP):  Define if not
        previously defined.
        (fixup_segment): Use TC_LINKRELAX_FIXUP.

        * doc/internals.texi: Document TC_LINKRELAX_FIXUP.

2000-08-21  Jason Eckhardt  <jle@cygnus.com>

        * config/tc-i860.c (md_apply_fix3): Do not insert the immediate
        if the fixup resulted in a relocation.

2000-08-18  Nick Clifton  <nickc@redhat.com>

        * config/tc-arm.c (decode_shift): Replace as_tsktsk with as_warn.
        Make reference to first element of shift_names explicit.

2000-08-18  Alexandre Oliva  <aoliva@redhat.com>

        * write.c (fixup_segment) [TC_DONT_FIX_NON_ADJUSTABLE]: Use
        obj_fix_adjustable() and tc_fix_adjustable() to tell whether to
        add a symbol's address.  Removed all target-specific #ifdefs that
        used to accomplished the same.
        * config/tc-v850.h (TC_DONT_FIX_NON_ADJUSTABLE): Define.
        * config/tc-m68k.h (TC_DONT_FIX_NON_ADJUSTABLE): Define.
        * config/tc-arm.h (TC_DONT_FIX_NON_ADJUSTABLE): Define.
        * config/tc-i960.h (TC_DONT_FIX_NON_ADJUSTABLE): Define.
        * config/tc-i386.h (TC_DONT_FIX_NON_ADJUSTABLE): Define.

2000-08-17  Kazu Hirata  <kazu@hxi.com>

        * dwarf2dbg.c: Fix formatting.

2000-08-17  Nick Clifton  <nickc@redhat.com>

        * config/tc-arm.c (decode_shift): Allow illegal shifts by zero
        to be recoded as logical shift lefts by zero.

2000-08-16  Jim Wilson  <wilson@cygnus.com>

        * config/tc-ia64.c (specify_resource, case IA64_RS_GR): Handle
        postincrement modified registers.  Handle IA64_OPND_R3_2 addl
        source registers.
        (note_register_values): Handle IA64_OPND_R3_2 operands.

2000-08-16  Jason Eckhardt  <jle@cygnus.com>

        * config/tc-i860.c (md_operand): Silly typo fixed.

2000-08-16  Nick Clifton  <nickc@redhat.com>

        * config/tc-arm.c (struct asm_shift): Delete.
        (shift[]): Delete.
        (enum asm_shift_index): New.
        (struct asm_shift_properties): New.
        (struct asm_shift_name): New.
        (shift_properties[]); New.
        (shift_names[]); New.

        (decode_shift): Use new structures.
        Issue a warning is "ROR #0" is used.
        Issue a warning if "ASR #0" or "LSR #0" is used.

        (md_begin): Initialise arm_shift_hsh table from new
        asm_shift_name array.

2000-08-16  Jakub Jelinek  <jakub@redhat.com>

        * config/tc-sparc.c: Kill all warnings.
        (md_parse_option): Set -32/-64 for -xarch=, allow all -A archs
        in -xarch= as well.
        (md_show_usage): Update usage text.

2000-08-16  Nick Clifton  <nickc@redhat.com>

        * config/tc-arm.c (do_bx): Warn about "bx px" not being very
        useful.

2000-08-15  Will Cohen  <wcohen@redhat.com>

        * config/tc-sh.h (DWARF2_LINE_MIN_INSN_LENGTH): Defined.

        * config/tc-sh.c (md_assemble): Changed so debug_type
        test performed for ppi_assemble
        * config/tc-sh.c: Included dwarf2dbg.h.
        (debug_line): Defined.
        (md_assemble): Generates dwarf2 line info.
        (sh_finalize): New function.  Finalize dwarf2 info.
        (assemble_ppi): Returns size of code generated.
        (build_Mytes): Returns size of code generated.
        (md_pseudo_table): Added "file" and "loc" psuedo ops.
        * config/tc-sh.h (md_end): Defined.
        (sh_finalize): Declared.

2000-08-15  Alexandre Oliva  <aoliva@redhat.com>

        * config/tc-sh.c (md_apply_fix) [BFD_RELOC_32, BFD_RELOC_16]: Use
        md_number_to_chars.

2000-08-14  Nick Clifton  <nickc@redhat.com>

        * config/tc-arm.c (do_bx): Allow "bx pc".

2000-08-14  Jim Wilson  <wilson@cygnus.com>

        * config/tc-ia64.c (md_longopts): Add -mconstant-gp and -mauto-pic.
        (md_parse_option):  Add OPTION_MCONSTANT_GP and OPTION_MAUTO_PIC.
        (md_begin): Change assignment to md.flag to OR in the new bit.

2000-08-14  Mark Elbrecht  <snowball3@bigfoot.com>

        * config/obj-coff.c (obj_coff_endef) [BFD_ASSEMBLER]: Set the debug
        flag for storage types C_ARG, C_REGPARM, C_FIELD, C_MOS, C_MOE,
        C_MOU, and C_EOS.

2000-08-14  Jason Eckhardt  <jle@cygnus.com>

        * NEWS: Mention i860 support.

Mon Aug 14 11:49:12 2000  Jeffrey A Law  (law@cygnus.com)

        * config/tc-mn10300.h (DWARF2_LINE_MIN_INSN_LENGTH): Define.

2000-08-14  Andreas Schwab  <schwab@suse.de>

        * doc/c-arm.texi (ARM Directives): Fix warnings from makeinfo.

2000-08-11  Andreas Schwab  <schwab@suse.de>

        * doc/c-i860.texi (Opcodes for i860): Remove braces from @item
        argument.

2000-08-11  Kazu Hirata  <kazu@hxi.com>

        * expr.c: Fix formatting.
        * config/obj-bout.c: Likewise.

2000-08-10  Jason Eckhardt  <jle@cygnus.com>

        * doc/c-i860.texi: Flesh out the i860 section more.

2000-08-10  Kazu Hirata  <kazu@hxi.com>

        * symbols.c: Fix formatting.
        * expr.c: Likewise.

Wed Aug  9 16:28:21 EDT 2000    Diego Novillo <dnovillo@cygnus.com>

        * config/tc-i386.c (md_assemble): Skip suffix check if the opcode
        modifier has the IgnoreSize bit set.

2000-08-09  Alan Modra  <alan@linuxcare.com.au>

        From  Rodney Brown  <RodneyBrown@mynd.com>
        * configure.in: Use elf on Unixware 7 (i586-sco-sysv5uw7.1.0)
        * configure: Regenerate.

2000-08-09  Kazu Hirata  <kazu@hxi.com>

        * hash.c: Fix formatting.
        * gasp.c: Likewise.

2000-08-08  Jason Eckhardt  <jle@cygnus.com>

        * config/tc-i860.h: Rework completely for BFD_ASSEMBLER.
        (i860_fix_info): New enum.
        (MD_APPLY_FIX3): Define.
        (WORKING_DOT_WORD): Define.
        (TC_HANDLES_FX_DONE): Define.
        (DIFF_EXPR_OK): Define.
        (LISTING_HEADER): Define.
        (TARGET_FORMAT): Select target format based on endian flag.
        (TARGET_BYTES_BIG_ENDIAN): Default to little endian.
        (target_big_endian): Add external declaration.

        * config/tc-i860.c: All existing code reworked completely. Other
        new code shown below.
        (SYNTAX_SVR4): Define.
        (target_warn_expand): New variable.
        (md_shortopts): Declare and define (-Qy, -Qn, and -V options).
        (md_longopts): Declare and define with new options (-EL, -EB,
        and -mwarn-expand).
        (md_show_usage): New function.
        (md_operand): New function.
        (obtain_reloc_for_imm16): New function.
        (md_apply_fix3): New function.
        (tc_gen_reloc): New function.

2000-08-08  Stephane Carrez  <Stephane.Carrez@worldnet.fr>

        * config/tc-m68hc11.c (build_jump_insn): Make sure the
        2 bytes of the jump address are in the same frag.
        (find): Accept 68hc12 register indirect modes.

        * NEWS: Mention 68HC11 & 68HC12 support.

2000-08-07  Richard Henderson  <rth@cygnus.com>

        * config/tc-ia64.c (unwind): Add prologue_mask member.
        (dot_vframe): Elide psp_gr record if it overlaps prologue_gr.
        (dot_save): Likewise for pfs_gr, rp_gr, and preds_gr.
        (dot_body): Clear unwind.prologue_mask.
        (dot_prologue): Set it.  Accept a register second argument.

2000-08-07  Kazu Hirata  <kazu@hxi.com>

        * config/atof-ieee.c: Fix formatting.
        * config/atof-tahoe.c: Likewise.

2000-08-06  Nick Clifton  <nickc@cygnus.com>

        * config/tc-sparc.c (md_begin): Fix typo in recent formatting
        work.

        * doc/as.texinfo (Pseudo Ops): Update to include descriptions
        of .popsection, .previous, .pushsection, .subsection,
        .version, .vtable_entry, .vtable_inherit and .weak.

2000-08-05  Kazu Hirata  <kazu@hxi.com>

        * config/tc-cris.c: Fix formatting.
        * config/tc-i386.c: Likewise.
        * config/tc-sparc.c (sparc_ip): Simplify the code.

2000-08-04  Kazu Hirata  <kazu@hxi.com>

        * config/tc-cris.c: Rearrange code for readability.
        * config/tc-d10v.c: Fix formatting.
        * config/tc-m32r.c: Likewise.
        * config/tc-sparc.c: Likewise.

2000-08-02  Jim Wilson  <wilson@cygnus.com>

        * config/tc-ia64.c (emit_one_bundle): Call ia64_free_opcode
        before ia64_find_opcode.
        (md_assemble): Likewise.

2000-08-01  Nick Clifton  <nickc@cygnus.com>

        * config/tc-arm.c (do_mrs): Fix skip of 'cpsr_all' flag.
        Undo some formatting fixes.

2000-08-01  Kazu Hirata  <kazu@hxi.com>

        * config/obj-som.c: Fix formatting.
        * config/obj-ieee.c: Likewise.
        * config/tc-arm.c: Likewise.
        * config/tc-v850.c: Likewise.

2000-08-01  Nick Clifton  <nickc@redhat.com>

        * doc/c-m68k.texi (section M680x0 Options): Turn into a table
        index by command line option.

2000-08-01  Michael Sokolov  <msokolov@ivan.Harhan.ORG>

        * doc/c-m68k.texi (@cindex @samp{--pcrel}): Rewrite option description.
        (@node M68K-Branch): Rewrite to match the reality.

2000-07-31  Jason Eckhardt  <jle@cygnus.com>

        * doc/c-i860.texi: New file.
        * doc/Makefile.am (CPU_DOCS): Add c-i860.texi.
        * doc/Makefile.in: Regenerate.
        * doc/all.texi: Add I860 as relevant architecture.
        * doc/as.texinfo: Include i860 dependent file c-i860.texi.

2000-07-31  Kazu Hirata  <kazu@hxi.com>

        * config/tc-d30v.c: Fix formatting.

2000-07-31  Michael Sokolov  <msokolov@ivan.Harhan.ORG>

        * config/tc-m68k.c (flag_keep_pcrel, OPTION_PCREL): Add --pcrel option.
        (md_convert_frag_1, md_estimate_size_before_relax): When making DBcc
        long emit a long branch if available instead of an absolute jump, never
        emit absolute jumps for anything with --pcrel.

        * doc/c-m68k.texi: Document new command line option.

2000-07-29  Marek Michalkiewicz  <marekm@linux.org.pl>

        * config/tc-avr.c: Use PARAMS macro in function declarations.
        Don't declare md_pcrel_from_section (already in tc-avr.h).
        (avr_operands): Use AVR_UNDEF_P and AVR_SKIP_P macros.
        (avr_operand): Don't set (unsigned) op_mask to -1.

2000-07-28  Jason Eckhardt  <jle@cygnus.com>

        * configure.in: Add bits for i860-stardent-{sysv4, elf}*.
        * configure: Regenerated.
        * config/obj-elf.c (obj_elf_type): Recognize a fifth type
        of operand to the .type directive (.e.g, "type").

2000-07-28  Alan Modra  <alan@linuxcare.com.au>

        * as.h (warn_comment, found_comment, found_comment_file): Declare.
        * app.c (do_scrub_chars): Record where first comment found.
        * read.c (read_a_source_file): Init found_comment on entry, and
        notify whether comments found on exit.
        * config/tc-hppa.c (md_shortopts): Add "c".
        (md_longopts): Add warn-comment.
        (md_parse_option): Handle it.
        (md_show_usage): Show available options.
        * config/tc-hppa.h (WARN_COMMENTS): Define if TE_LINUX

Thu Jul 27 11:25:01 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * config/tc-mn10300.c (md_convert_frag): Fix printfs.
        (tc_gen_reloc): Add cast when assigning bfd_abs_symbol to
        sym_ptr_ptr
        (md_estimate_size_before_relax): Don't fall off end of function.

2000-07-27  Kazu Hirata  <kazu@hxi.com>

        * config/tc-avr.c: Fix formatting.
        * config/tc-ns32k.c: Likewise.

2000-07-27  Alan Modra  <alan@linuxcare.com.au>

        * config/tc-d10v.c (find_opcode): Remove extraneous `='.

2000-07-27  Kazu Hirata  <kazu@hxi.com>

        * config/tc-d10v.c: Fix formatting.
        * config/tc-z8k.c: Likewise.
        * config/tc-sparc.c: Likewise.

2000-07-26  Dave Brolley  <brolley@redhat.com>

        * cgen.c (queue_fixup): Declare opinfo.
        (gas_cgen_parse_operand): Mark unused parameters with ATTRIBUTE_UNUSED.
        (gas_cgen_md_operand): Ditto.
        (gas_cgen_md_apply_fix3): Ditto.

2000-07-24  Mark Elbrecht  <snowball3@bigfoot.com>

        * config/obj-coff.c (obj_frob_symbol): Don't merge
        labels. Don't merge if the symbol isn't constant. Return
        immediately if a symbol is merged.

2000-07-22  Alan Modra  <alan@linuxcare.com.au>

        * frags.c (frag_align): Correct absolute section alignment.

2000-07-20  DJ Delorie  <dj@redhat.com>

        * config/obj-coff.c (obj_frob_symbol): revert previous change,
        it breaks linking against DLLs.

2000-07-20  Hans-Peter Nilsson  <hp@axis.com>

        * configure.in: Add CRIS support.
        * configure: Regenerate.
        * Makefile.am: (CPU_TYPES): Add cris.
        (CPU_OBJ_VALID) [aout]: Add cris.
        (MULTI_CPU_TYPES): Add cris.
        (MULTI_CPU_OBJ_VALID) [aout]: Add cris.
        [coff]: Only i386 and mips are valid.
        (TARGET_CPU_CFILES): Add config/tc-cris.c.
        (TARGET_CPU_HFILES): Add config/tc-cris.h.
        (MULTI_CFILES): Add config/e-crisaout.c and config/e-criself.c.
        Regenerate dependencies.
        * Makefile.in: Regenerate.
        * aclocal.m4: Regenerate.
        * as.c: Declare crisaout, criself.
        * config/tc-cris.h, config/tc-cris.c: New.
        * config/e-criself.c, config/e-crisaout.c: New.
        * po/POTFILES.in, po/gas.pot: Regenerate.

2000-07-20  Kazu Hirata  <kazu@hxi.com>

        * read.c: Fix formatting.
        * write.c: Fix formatting.

2000-07-19  H.J. Lu  <hjl@gnu.org>

        * sb.c: Include <stdlib.h> if exists for abort ().

2000-07-19  Alan Modra  <alan@linuxcare.com.au>

        * config/tc-hppa.c (hppa_fix_adjustable): Correct LR%/RR% comment.
        (arg_reloc_stub_needed): #ifdef OBJ_SOM, not #ifdef SOM.
        (pa_type_args): Same here.

2000-07-17  Mark Elbrecht  <snowball3@bigfoot.com>

        * config/obj-coff.c (obj_frob_symbol): Don't merge labels. Don't
        merge if the symbol isn't constant. Don't call S_SET_EXTERNAL if
        the storage class is already set.

2000-07-17  Kazu Hirata  <kazu@hxi.com>

        * config/tc-m68hc11.c: Fix formatting.
        * config/tc-mn10200.c: Likewise.
        * config/tc-mn10300.c: Likewise.
        * config/tc-pj.c: Likewise.
        * config/tc-tic80.c: Likewise.
        * config/tc-w65.c: Likewise.

2000-07-17  Frank Ch. Eigler  <fche@redhat.com>

        * expr.c (operand): Permit %bin literals if LITERAL_PREFIXPERCENT_BIN
        is defined.

2000-07-15  Ian Lance Taylor  <ian@zembu.com>

        * doc/c-mips.texi (MIPS Opts): Remove erroneous space after
        @code.

2000-07-15  Alan Modra  <alan@linuxcare.com.au>

        * config/tc-hppa.c (hppa_fix_adjustable): Use the same checks for
        ELF as are used for SOM (except the 32-bit reloc one) to decide
        whether a symbol can be reduced to a section symbol.  Expand on
        the comment for symbols involved in LR% and RR% expressions.

2000-07-14  Nick Clifton  <nickc@cygnus.com>

        * config/tc-mips.c (mips_disable_float_construction): New
        static variable.  Set to true if doubles should not be
        constructed by loading two single width fp registers with
        halves of the value.
        (mips_ip): Test mips_disable_float_construction.
        (md_longopts): Add command line switches --construct-floats
        and --no-construct-floats.
        (md_parse_option): Parse new command line options.
        (md_show_usage): Describe new command line options.

        * doc/c-mips.texi: Document new command line options.

2000-07-13  Koundinya K  <kk@ddeorg.soft.net>

        * configure.in: Remove the test /usr/dde for mips-*-sysv4*MP*
        * configure: Regenerate.

2000-07-13  Hans-Peter Nilsson  <hp@axis.com>

        * configure.in (DEFAULT_EMULATION setting): Revert part of
        2000-07-01 change that set te_multi=multi unless set to tmips.
        * configure: Regenerate.

2000-07-12  Mark Elbrecht  <snowball3@bigfoot.com>

        * config/obj-coff.c (coff_frob_section): Add padding to the last
        section when aligning it increases its size.

2000-07-11  Kazu Hirata  <kazu@hxi.com>

        * config/tc-tic54x.c: Fix formatting.

2000-07-10  Kazu Hirata  <kazu@hxi.com>

        * config/tc-h8500.c: Fix formatting.
        * config/tc-tic54x.c: Fix formatting.

2000-07-10  Alan Modra  <alan@linuxcare.com.au>

        * config/tc-hppa.c (md_apply_fix): Check fmt 12 and 22 pc-rel
        displacements correctly.

        * read.h (s_abort): Add ATTRIBUTE_NORETURN.

2000-07-10  Ryan Bradetich  <rbradetich@uswest.net>

        * hash.c (hash_insert): Add cast to obstruct_alloc to fix
        warning.
        (hash_jam): Ditto.

2000-07-09  Alan Modra  <alan@linuxcare.com.au>

        From  David Huggins-Daines  <dhd@linuxcare.com>
        * config/te-hppalinux64.h: Add a new emulation.
        * configure.in (emulations): Add configure bits to support the
        64-bit Linux/parisc target.
        * configure: Regenerate.

        * config/tc-hppa.c (md_parse_option): Support `-V' for ELF.
        (md_shortopts): Add `V' for ELF.

        * config/tc-hppa.c (arg_reloc_stub_needed): Define as zero except
        when SOM or ELF_ARG_RELOC are defined.
        (pa_type_args): Only set symbol_arg_reloc_info when SOM or
        ELF_ARG_RELOC are defined.
        (pa_stringer_aux): Don't pa_check_current_space_and_subspace here..
        (pa_stringer): ..Do it here instead.  Fix comment typos.
        (hppa_force_relocation): Cast enums to int before comparing with
        ints.

        From  Ryan Bradetich  <rbradetich@uswest.net>
        * config/tc-hppa.c: Removed unneeded libbfd.h to fix macro
        redifinition warning.
        (md_apply_fix): Added cast from enum to int for fixP->fx_r_type.
        (hppa_force_relocation): ditto
        (md_apply_fix): Added cast to buf to fix warnings.

        * config/tc-hppa.h (pa_define_label, parse_cons_expression_hppa,
        cons_fix_new_hppa, hppa_force_relocation): Prototype.

        * config/tc-hppa.c (reloc_type): It's an enum for OBJ_ELF.
        (R_N0SEL, R_N1SEL): Define only for OBJ_SOM.
        (tc_gen_reloc): Make `code' a reloc_type and `codes' a
        reloc_type** to avoid warnings in switch.
        (md_apply_fix): Make insn, val signed.  Zap buf_wd and read insn a
        little earlier instead.

        * config/tc-hppa.c (symbol_arg_reloc_info): Define for both som
        and elf.
        (pa_type_args): Use symbol_arg_reloc_info.
        (struct pa_it): Make arg_reloc unsigned int.
        (struct hppa_fix_struct): Likewise for fx_arg_reloc.
        (pa_text, pa_data, pa_comm): Don't compile for TE_LINUX.
        (pa_code): Delete.  pa_text duplicates this function.
        (md_pseudo_table): Call obj_elf_text for ".code" if TE_LINUX.
        (fix_new_hppa): Argument offset is offsetT, arg_reloc is unsigned
        int.
        (cons_fix_new_hppa): Actually change selector to e_fsel when
        warning about assuming so.
        (tc_gen_reloc): More example elf arg reloc code.
        (md_apply_fix): Use arg_reloc_stub_needed for elf too.
        (hppa_force_relocation): Likewise.

        * config/tc-hppa.h: Use TARGET_ARCH_SIZE to select target include
        files.
        (pa_end_of_source): Prototype.
        (hppa_fix_adjustable): Prototype.
        (LABELS_WITHOUT_COLONS): Move it..
        * config/te-hppa.h: To here.

        * config/te-hppa64.h: New file.

        * config/tc-hppa.c: Use TARGET_ARCH_SIZE to select target reloc
        type.
        (md_apply_fix): Pass stdoutput to bfd_hppa_insn2fmt.  Handle
        format -10, -16, 16 relocs.
        (hppa_elf_mark_end_of_function): Test for null
        last_call_info->start_symbol

        * config/tc-hppa.c (pa_ip): In case 'V', pass `strict' to
        CHECK_FIELD, not INSERT_FIELD_AND_CONTINUE.  Don't pass opcode to
        re_assesmble_* functions.  Delete extraneous statements.  Fix
        typos in comments.
        (md_apply_fix): Compare against 1048575 in case 21.  Don't pass
        insn to re_assemble_*.

2000-07-08  Ulf Carlsson  <ulfc@engr.sgi.com>

        * doc/internals.texi (Expressions): Fix typo.

2000-07-08  Kazu Hirata  <kazu@hxi.com>

        * config/tc-sh.c: Fix formatting.
        * config/tc-tic54x.c: Fix formatting.
        * depend.c: Fix formatting.
        * flonum-konst.c: Likewise.
        * flonum-mult.c: Likewise.

2000-07-07  Kazu Hirata <kazu@hxi.com>

        * config/tc-sh.c: Fix comments.
        * config/obj-vms.c: Fix comments.
        * config/tc-a29k.c: Likewise.
        * config/tc-alpha.c: Likewise.
        * config/tc-h8300.c: Likewise.
        * config/tc-h8500.c: Likewise.
        * config/tc-i370.c: Likewise.
        * config/tc-ia64.c: Likewise.
        * config/tc-m68hc11.c: Likewise.
        * config/tc-m68k.c: Likewise.
        * config/tc-mips.c: Likewise.
        * config/tc-ns32k.c: Likewise.
        * config/tc-ppc.c: Likewise.
        * config/tc-z8k.c: Likewise.

2000-07-06  Mark Elbrecht  <snowball3@bigfoot.com>

        * config/obj-coff.c (TC_COFF_SECTION_DEFAULT_ATTRIBUTES): New.
        Default to '(SEC_LOAD | SEC_DATA)'.
        (obj_coff_section) [BFD_ASSEMBLER]: Use it.

        * doc/internals.texi (CPU Backend): Describe
        TC_COFF_SECTION_DEFAULT_ATTRIBUTES.

Thu Jul  6 17:20:58 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * as.c (parse_args): NULL terminate the long option list.

Tue Jul  4 14:08:28 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * config/tc-d30v.h: Include "write.h" for fixS.
        (d30v_start_line, md_pcrel_from_section): Add function prototypes.

2000-07-05  Nick Clifton  <nickc@cygnus.com>

        * config/tc-d30v.c (write_2_short): Further changes to warning
        messages produced when combining EITHER_BUT_PREFER_MU attributed
        opcodes.

2000-07-05  DJ Delorie  <dj@redhat.com>

        * MAINTAINERS: new

2000-07-04  Alexandre Oliva  <aoliva@redhat.com>

        * config/tc-arm.c (psrs): Accept combinations of flags.

2000-07-03  Marek Michalkiewicz  <marekm@linux.org.pl>

        * config/tc-avr.c: Change _ () to _() around all strings marked
        for translation (exception from the usual coding style).
        (avr_opt): New struct variable, how the new switches are set.
        (OPTION_MMCU): Define as 'm' and actually use.
        (md_longopts): Add -mall-opcodes, -mno-skip-bug, -mno-wrap.
        (show_mcu_list): New function, display the list of known MCUs.
        (md_show_usage): Document the new switches.  Call show_mcu_list.
        (avr_set_arch): Change 'm' to OPTION_MMCU.
        (md_parse_option): Call show_mcu_list if unknown MCU specified.
        Handle the new switches.
        (avr_operands): Disable warnings for undefined combinations of
        operands if -mall-opcodes.  Disable warnings for skipping two-word
        instructions if enhanced core or -mno-skip-bug.
        (avr_operand): Accept all addressing modes on avr1 if -mall-opcodes.
        (md_apply_fix3): Reject 8K wrap if >8K or -mno-wrap.
        (md_assemble): Accept opcodes not supported by MCU if -mall-opcodes.
        (avr_ldi_expression): Warn about implicit lo8().
        * config/tc-avr.h (md_pcrel_from_section): Add prototype.

2000-07-01  Koundinya K  <kk@ddeorg.soft.net>

        * configure.in: Add entry for mips-*-sysv4*MP*
        * configure: Rebuild
        * config/tc-mips.c (mips_target_format): Return elf32-tradbigmips or
        elf32-tradlittlemips for traditional mips targets.
        * config/tc-mips.c (md_estimate_size_before_relax): Duplicate the
        test for Link Once sections as in adjust_reloc_syms.
        * config/te-tmips.h: New file for traditional mips targets. Define
        TE_TMIPS.

2000-06-29 Mark Elbrecht <snowball3@bigfoot.com>

        * config/obj-coff.c (obj_coff_setcion) [BFD_ASSEMBLER]: If the
        flags argument is not present, don't change an existing section's
        section's attributes. If the flags argument is present, warn if the
        attributes don't match the section's current attributes. When
        long section names are supported, set SEC_LINK_ONCE and
        SEC_LINK_DUPLICATES_DISCARD for a new .gnu.linkonce section.

Thu Jun 29 21:30:00 2000  Hans-Peter Nilsson  <hp@axis.com>

        * config/obj-aout.c (obj_aout_type): Do not ignore for undefined
        symbols; create them.

2000-06-29 Mark Elbrecht <snowball3@bigfoot.com>

        * write.c (set_segment_vma): New: Set vma and lma for a segment.
        (write_object_file) [BFD_ASSEMBLER && OBJ_COFF && TE_GO32]: Use it.

2000-06-27  Aldy Hernandez  <aldyh@redhat.com>

        * config/tc-mips.c (mips_ip): handle "(foo-.-4)" type of
        expressions.  Ignore the problem when handling 16 bit signed
        immediates, because the assembler will take care of the relocation
        later.

2000-06-27  Nick Clifton  <nickc@cygnus.com>

        * config/tc-d30v.c (write_2_short): Do not allow opcodes with
        the EITHER_BUT_PREFER_MU attribute to be combined into a reverse
        sequential order, and emit warning messages if the input source
        code contains constructs like that, or parallel constructs
        containing such opcodes.

2000-06-26  Marek Michalkiewicz  <marekm@linux.org.pl>

        * config/tc-avr.c (mcu_types): Rename avr4 to avr5, add avr4.
        Add more MCU types for avr4 and avr5.  Replace at94k{10,20,40}
        with just at94k.  Change AVR_ISA_85xx back to AVR_ISA_2xxx.
        (md_show_usage): Update usage message.
        (md_parse_option): Allow redefinition of MCU type within the
        same avr[1-5] bfd machine type.  Show both old and new MCU type
        in the error message.
        (md_apply_fix3): Support 8K wrap if AVR_ISA_MEGA is not set.
        Simplify 8K wrap code.

2000-06-25  Kazu Hirata  <kazu@hxi.com>

        * config/obj-aout.c: Remove all uses of DEFUN.
        * config/obj-ieee.c: Likewise.
        * config/tc-sh.c: Fix comment typos.
        * config/tc-tahoe.c: Likewise.
        * config/tc-vax.c: Likewise.
        * config/tc-w65.c: Likewise.
        * config/tc-z8k.c: Likewise.
        * config/tc-h8300.c (build_bytes): Assemble ldmac correctly.

2000-06-24  DJ Delorie  <dj@cygnus.com>

        * config/tc-i386.c (md_estimate_size_before_relax): Revert
        more changes from Sept 1999
        (tc_i386_fix_adjustable): ditto
        (md_apply_fix3): ditto

2000-06-24  Frank Ch. Eigler  <fche@redhat.com>

        * cgen.c (expr_jmp_buf_p): New validity flag for expr_jmp_buf.
        (gas_cgen_parse_operand): Set it around expression() call.
        (gas_cgen_md_operand): Test for it before longjmp().

2000-06-24  Kazu Hirata  <kazu@hxi.com>

        * config/tc-h8500.c: Remove all uses of DEFUN.
        * config/tc-sh.c: Likewise.
        * config/tc-w65.c: Likewise.
        * config/tc-z8k.c: Likewise.

        * config/tc-h8500.c: Fix typos in comments.

2000-06-23  Frank Ch. Eigler  <fche@redhat.com>

        * expr.c (operand): Permit $hex literals if LITERAL_PREFIXDOLLAR_HEX
        is defined.

2000-06-23  matthew green  <mrg@redhat.com>

        * expr.c (operand): Do not as_bad() if RELAX_PAREN_GROUPING is
        defined.  Fix error message for `[' grouping.

2000-06-22  Kazu Hirata  <kazu@hxi.com>

        * config/tc-h8300.c: Fix formatting and comment typos.

2000-06-22  Timothy Wall  <twall@cygnus.com>

        * config/tc-ia64.c (note_register_values): Move premature QP
        notation clearing into the appropriate place.

2000-06-22  Alan Modra  <alan@linuxcare.com.au>

        * dep-in.sed: Escape literal `.'s on patterns.  Trim off `../'
        first before anything else.  Add bin-bugs.h, emul.h and progress.h
        Sort list of files as for $(OBJS) in Makefile.am.

        * Makefile.am (DEP): grep for leading `/' in DEPA, and fail if we
        find one.  Remake dependencies.
        ($(OBJS)): Add bin-bugs.h, emul.h, and progress.h  Sort the list.
        * Makefile.in: Regenerate.
        * doc/Makefile.in: Regenerate.

        * config/tc-i386.c (i386_displacement): Don't assume a constant
        displacement is necessarily 16 bits when in 16 bit code mode.
        (md_assemble): Instead size the displacement here after we know
        for sure that a .code16gcc operand hasn't automatically added
        operand size prefixes.

2000-06-21  H.J. Lu  <hjl@gnu.org>

        * Makefile.am: Rebuild dependency.
        * Makefile.in: Rebuild.

2000-06-21  Kazu Hirata  <kazu@hxi.com>

        * config/tc-h8300.c (parse_reg): Make the function static.
        (parse_exp): Likewise.

2000-06-20  DJ Delorie  <dj@cygnus.com>

        * config/tc-i386.c (tc_i386_fix_adjustable): Revert change from
        Sept 1999; RVA relocs need to be treated more like DIR32 relocs
        for cygwin import libraries to work properly.

2000-06-20  H.J. Lu  <hjl@gnu.org>

        * Makefile.am: Rebuild dependency.
        * Makefile.in: Rebuild.
        * configure: Likewise.
        * doc/Makefile.in: Likewise.

2000-06-20  Timothy Wall  <twall@cygnus.com>

        * doc/internals.texi (CPU backend): Add @itemx for
        TC_START_LABEL_WITHOUT_COLON.
        * doc/c-tic54x.texi: New.
        * doc/as.texinfo: Add tic54x features and include primary tic54x
        documentation file.
        * doc/all.texi: Add C54X.
        * doc/Makefile.am (CPU_DOCS): Add c-tic54x.texi.
        * doc/Makefile.in: Regenerate.
        * configure.in: Add tic54x and define LIBM for tic54x.
        * configure: Regenrate.
        * config/tc-tic54x.[ch]: New.
        * config/obj-coff.h: Add tic54x.
        * Makefile.am: (CPU_TYPES): Add tic54x.
        (TARGET_CPU_CFILES): Add 'tc-tic54x.c'.
        (TARGET_CPU_HFILES): Add 'tc-tic54x.h'.
        (as_new_LDADD): Add $(LIBM).
        * Makefile.in: Regenerate.

2000-06-18  Stephane Carrez  <stcarrez@worldnet.fr>

        * doc/Makefile.am (CPU_DOCS): Added 68hc11 file.
        * doc/c-m68hc11.texi: Document 68HC11 and 68HC12 port.
        * doc/as.texinfo: Likewise.

        * configure, Makefile.in: Regenerate.
        * configure.in (emulations): Recognize m6811 and m6812.
        * Makefile.am (CPU_TYPES, TARGET_CPU_CFILES, TARGET_CPU_HFILES):
        Added files for 68hc11 and 68hc12 assembler.
        * config/tc-m68hc11.c: Assembler for 68hc11 and 68hc12.
        * config/tc-m68hc11.h: Header definition for that assembler.

2000-06-18  Nick Clifton  <nickc@redhat.com>

        * symbols.c (resolve_symbol_value): Use bfd_octets_per_byte
        instead of OCTETS_PER_BYTE.

        * config/tc-v850.c: Fix compile time warnings.
        * config/tc-ppc.c: Fix compile time warnings.

2000-06-18  H.J. Lu <hjl@gnu.org>

        * configure.in: Don't emulate i386-pc-pe-coff with i386coff.
        * configure: Rebuild.

2000-06-17 Mark Elbrecht <snowball3@bigfoot.com>

        * config/obj-coff.c (obj_coff_weak): Typo fix: Change BFD_ASSEMLER
        to BFD_ASSEMBLER.

2000-06-16  Nick Clifton  <nickc@cygnus.com>

        * config/tc-mips.c (md_parse_option): Accept RM5200,RM5230,
        RM5231, RM5261, RM5721 and RM7000 as r5000 cpu variants.

        * doc/c-mips.texi: Document newly accepted cpu variants.

2000-06-15  Ulf Carlsson  <ulfc@engr.sgi.com>

        * config/tc-mips.h: Remove definition of ONLY_STANDARD_ESCAPES.

2000-06-13  Ulf Carlsson  <ulfc@engr.sgi.com>

        * macro.c (getstring): Make it possible to escape the quote
        character.

Tue Jun 13 20:58:28 2000  Catherine Moore <clm@redhat.com>

        * config/tc-hppa.c (pa_export): Weak symbols can be global.

2000-06-13  H.J. Lu  <hjl@gnu.org>

        * configure: Regenerate.

2000-06-09  Alan Modra  <alan@linuxcare.com.au>

        * app.c (do_scrub_begin): Don't default lex[';'] as a line
        separator.
        * doc/internals.texi (line_separator_chars): Semicolon is no
        longer a default.  Mention null and newline as defaults.

        * read.c (is_end_of_line): Remove ifdef TC_HPPA.

        * config/tc-i386.h (line_separator_chars): Explicitly mention `;'
        * config/tc-i860.h (line_separator_chars): Likewise.
        * config/tc-h8300.c (line_separator_chars): Likewise.
        * config/tc-i960.c (line_separator_chars): Likewise.
        * config/tc-m68k.c (line_separator_chars): Likewise.
        * config/tc-mips.c (line_separator_chars): Likewise.
        * config/tc-ns32k.c (line_separator_chars): Likewise.
        * config/tc-sparc.c (line_separator_chars): Likewise.
        * config/tc-vax.c (line_separator_chars): Likewise.

        * config/tc-h8300.c (comment_chars): Use string initialiser.
        * config/tc-i960.c (line_comment_chars): Likewise.
        * config/tc-z8k.c (comment_chars, line_comment_chars,
        line_separator_chars): Likewise.

        * config/tc-arm.c (line_separator_chars): Always use `;', not just
        for TE_LINUX.

2000-06-08  Nick Clifton  <nickc@cygnus.com>

        * config/tc-arm.c (cons_fix_new_arm): Assign correct reloc value
        for size 1 fixes.

2000-06-08  David O'Brien  <obrien@FreeBSD.org>

        * configure.in (VERSION): Update to show this is the CVS mainline.

2000-06-08  Matthew Jacob  <mjacob@feral.com>

        * config/tc-alpha.c (md_undefined_symbol): Properly understand that
        $at is the integer register $r28, vs. both $r28 and the floating
        point register $f28.

2000-06-08  James E. Wilson  <wilson@cygnus.com>

        * config/tc-ia64.c (generate_unwind_image): Call ia64_flush_insns.
        (dot_endp): Don't call ia64_flush_insns.
        (emit_one_bundle): Don't delete prologue/body records from
        unwind_record list in first loop.  Rewrite second loop to account for
        this.

2000-06-07  David Mosberger  <davidm@hpl.hp.com>

        * config/tc-ia64.c: Add missing prototypes.
        (generate_unwind_image): Cast argument to output_unw_records call.

Wed Jun  7 22:44:14 2000  Denis Chertykov  <denisc@overta.ru>

        * config/tc-avr.c (avr_operand): fix the formatting of the comment.

Wed Jun  7 21:26:15 2000  Denis Chertykov  <denisc@overta.ru>

        * config/tc-avr.c (AVR_ISA_???): moved to include/opcode/avr.h
        (REGISTER_P): likewise.
        (avr_opcodes): uses include/opcode/avr.h
        (avr_operand): enable ld r,Z or st r,Z for at90s1200.

2000-06-04  Alan Modra  <alan@linuxcare.com.au>

        * read.c (is_end_of_line): No ';' for TC_HPPA.  Add missing
        initializers too.

2000-06-03  H.J. Lu  <hjl@gnu.org>

        * read.c (is_end_of_line): Put back `;'.

2000-06-03  Alan Modra  <alan@linuxcare.com.au>

        * config/tc-i386.c (md_shortopts): Remove 'm', add 'q' to non-elf.

2000-06-01  Alan Modra  <alan@linuxcare.com.au>

        * expr.c (operand): Test is_end_of_line outside switch to catch
        line separator chars that are also operators.
        (operator): Return O_illegal for line separator chars.

        * read.c (is_end_of_line): Use 1 instead of 99.  Don't set `;'
        entry (or `!' entry for TC_HPPA).

        * config/tc-arm.c (my_get_float_expression): Cast to unsigned char
        before indexing is_end_of_line.  Remove redundant check for '\0'.
        (fp_op2): Likewise.
        * config/tc-h8500.c (md_assemble): Likewise.
        * config/tc-mcore.c (md_assemble): Likewise.
        * config/tc-tic30.c (tic30_find_parallel_insn): Likewise.
        (md_atof): Likewise

        * config/tc-m88k.c (s_bss): Cast to unsigned char before indexing
        is_end_of_line.
        * config/tc-mcore.c (mcore_cons): Likewise.
        (mcore_float_cons): Likewise.
        (mcore_stringer): Likewise.
        * config/tc-tic30.c (tic30_find_parallel_insn): Likewise.

2000-06-01  Scott Bambrough <scottb@netwinder.org>

        * config/tc-arm.c (do_mrs): Allow SPSR_BIT to be set correctly.

2000-05-29  Nick Clifton  <nickc@cygnus.com>

        * config/tc-sh.c: Fix compile time warning messages.

        * config/tc-mips.c: Fix compile time warning messages.

2000-05-29  Philip Blundell  <philb@gnu.org>

        * doc/as.texinfo: Update copyright dates.
        (Local Labels): Delete misplaced mention of ARM.
        * NEWS: Mention ARM ELF support.

2000-05-27  Alexandre Oliva  <aoliva@cygnus.com>

        * config/tc-mn10300.c (md_assemble): Copy size to real_size before
        it is modified, and use the real_size to compute the frag address
        for dwarf2 line info.

2000-05-27  Alan Modra  <alan@linuxcare.com.au>

        * Makefile.am (DEP, DEP1, dep, dep-in, dep-am): Use a better sed
        line-matching scheme to cope with automake moving variables around.
        ($(TARG_CPU_O)): Remove dependency on TARG_CPU_DEP_@target_cpu_type@
        * Makefile.in: Regenerate.

2000-05-26  Jakub Jelinek  <jakub@redhat.com>

        * config/tc-sparc.c (sparc_relax): New.
        (md_longopts): Add -relax and -no-relax options.
        (md_parse_options, md_show_usage): Likewise.
        (md_apply_fix3): Optimize tail call into branch always if possible.

Thu May  4 15:27:07 2000  Donald Lindsay  <dlindsay@cygnus.com>

        * config/tc-d10v.c (write_2_short, parallel_ok, md_assemble,
        d10v_cleanup) implement Mitsubishi's newly explained branch-packing
        rules, with warning when a GAS statement specifies a packing that
        will result in an instruction being squashed.
        Added typdef packing_type and enumerals, changed various integer
        literals to use the enumerals.

2000-05-24  David Mosberger  <davidm@hpl.hp.com>

        * config/tc-ia64.c (dot_restorereg_p): New function.
        (md_pseudo_table): Add restorereg.p.
        (output_X3_format): Fix typo: record type should be UNW_X3, not UNW_X1.
        (output_X4_format): Fix typo: record type should be UNW_X4, not UNW_X2.

        * config/tc-ia64.h (unw_record_type): Add unwabi.
        (unw_r_record): Rename member MASK to GRMASK.  Add sub-structure
        called MASK with members for imask, and the masks produced by
        fr_mem, gr_mem, br_mem, and frgr_mem.
        (unw_p_record): Add members ABI and CONTEXT.
        (unw_x_record): Add member AB.
        * config/tc-ia64.c (enum reg_symbol): Add REG_PSP and REG_PRIUNAT
        as pseudo-register for use during unwind info generation.
        (AR_PFS, AR_LC): New macros.
        (enum pseudo_type): Add PSEUDO_FUNC_REG to permit declaring registers
        whose names start with an at sign (as in "@priunat").
        (pseudo_func): Add "svr4", "hpux", "nt" constants and "priunat"
        register.
        (unwind_list, unwind_tail, current_unwind_entry, proc_start,
        proc_end, unwind_info, personality_routine): Consolidate into
        "unwind" structure to reduce offset-table use.  Add member
        NEXT_SLOT_NUMBER to track the slot number for the next instruction
        to be emitted.
        (output_R1_format, output_R3_format, output_P3_format,
        output_P6_format): Initialize R with zero to reduce compiler warnings.
        (output_P7_format): Ditto.  Add `default' branch to switch
        statement to reduce compiler warnings.
        (output_P8_format, output_B1_format, output_B4_format): Ditto.
        (output_P4_format): Rename 2nd & 3rd arg to IMASK and IMASK_SIZE.
        (format_ab_reg): Rename from format_a_b_reg.  Merge A and B args
        into single argument.
        (output_X1_format, output_X3_format): Initialize R with zero to reduce
        compiler warnings.  Merge A and B args into single argument.
        (output_X2_format, output_X4_format): Remove unused variable R.  Merge
        A and B args into single argument.
        (free_record): Removed (wasn't used).
        (free_list_records): Also free imasks in prologue records.
        (output_prologue, output_prologue_gr): Initialize mask bits to zero.
        (output_spill_mask): Remove.
        (output_unwabi): New function.
        (output_epilogue, output_label_state, output_copy_state): Call
        alloc_record.
        (output_spill_psprel, output_spill_sprel, output_spill_psprel_p,
        output_spill_sprel_p, output_spill_reg, output_spill_reg_p): Add AB
        argument.
        (process_one_record): New locals FR_MASK and GR_MASK.  Ignore
        gr_mem, fr_mem, br_mem, and frgr_mem records and instead emit them
        as part of handling the prologue records.  Emit region's imask if
        we have one.  Handle unwabi, epilogue, label_state, copy_state,
        spill_psprel, spill_sprel, spill_reg, spill_psprel_p,
        spill_sprel_p, and spill_reg_p records.
        (set_imask, count_bits, slot_index): New function.
        (fixup_unw_records): Fix region size computation.  Handle
        epilogue, spill_reg, spill_sprel, spill_psprel, spill_reg_p,
        spill_sprel_p, and spill_psprel_p records.  Merge mask bits of
        frgr_mem, fr_mem, gr_mem, br_mem on a per-region basis and
        set_imask accordingly.  Update imask for gr_gr, and br_gr records.
        (convert_expr_to_ab_reg, convert_expr_to_xy_reg): New function.
        (dot_save): Use manifest constants for applicaton registers.
        Handle REG_PR and REG_PRIUNAT.
        (dot_restore): Don't just ignore it.
        (dot_restorereg): New function..
        (generate_unwind_image): Ensure unwind info is a multiple of eight
        bytes, not just four bytes.
        (dot_handlerdata, dot_unwentry): Demand empty rest of line.
        (dot_altrp): Don't just ignore it.
        (dot_savemem): New function.  Replaces dot_savesp() and
        dot_savepsp().  Use manifest constants for applicaton registers.
        Handle REG_PR and REG_PRIUNAT.
        (dot_savef): Simplify.
        (dot_saveb): Support generation of br_gr.
        (dot_spillreg, dot_spillmem, dot_spillreg_p, dot_spillmem_p,
         dot_label_state, dot_copy_state): New function.
        (dot_unwabi): Don't just ignore it.
        (md_pseudo_table): Add restorereg, spillreg, spillsp, spillpsp,
        spillreg.p, spillsp.p, spillpsp, label_state, copy_state,
        unwabi, vframesp, and vframepsp.  Fix typo alprp->altrp.
        (emit_one_bundle): Set slot number for prologue/body records
        *before* emitting the first insn.
        (emit_one_bundle): Set UNWIND.NEXT_SLOT_NUMBER.
        (md_begin): Declare "psp" pseudo-register.
        (md_operand): Handle PSEUDO_FUNC_REG.  Fix printing of error message
        so we don't get segfault.
        (output_psp_sprel): Output sp/psp relative offsets as 4-byte word
        counts as required per SW Conventions manual
        (output_rp_psprel, output_rp_sprel, output_pfs_psprel,output_pfs_sprel,
        output_preds_psprel, output_preds_sprel, output_spill_base,
        output_unat_psprel, output_unat_sprel, output_lc_psprel,
        output_lc_sprel, output_fpsr_psprel, output_fpsr_sprel,
        output_priunat_psprel, output_priunat_sprel, output_bsp_psprel,
        output_bsp_sprel, output_bspstore_psprel, output_bspstore_sprel,
        output_rnat_psprel, output_rnat_sprel, output_spill_psprel,
        output_spill_sprel, output_spill_psprel_p, output_spill_sprel_p):Ditto.
        (dot_vframe): Implement.
        (dot_vframesp, dot_vframepsp): New function.

Tue May 23 00:57:05 2000  Hans-Peter Nilsson  <hp@axis.com>

        * configure.in (i386-*-freebsd a.out entry): Quote properly.
        * configure: Regenerate.

2000-05-23  Alan Modra  <alan@linuxcare.com.au>

        * config/tc-i386.c (md_assemble): Pass jump reloc in fr_var...
        (md_estimate_size_before_relax): so we can use it here instead of
        old kludges.  Localise vars to blocks.  Comment.

        * frags.c (frag_new): Update fr_var comments.
        * frags.h (struct frag): Ditto.

2000-05-22  Richard Henderson  <rth@cygnus.com>

        * config/tc-ia64.c (FUNC_PC_RELATIVE): New.
        (pseudo_func): Add pcrel.
        (operand_match):  Handle IA64_OPND_TGT64.
        (build_insn): Likewise.
        (md_begin): Initialize pseudo_func[FUNC_PC_RELATIVE].
        (ia64_gen_real_reloc_type): Handle FUNC_PC_RELATIVE.
        (fix_insn): Handle all three 64-bit relocation types.

Mon May 22 22:43:32 2000  Hans-Peter Nilsson  <hp@axis.com>

        * obj.h (struct format_ops): New members begin, app_file,
        s_set_other, s_set_desc, s_get_type, s_set_type,
        separate_stab_sections, init_stab_section.

        * config/obj-multi.h: Update GPL notice to v2.
        (obj_begin): New.
        (obj_app_file): New.
        (S_SET_SIZE): Test s_set_size for NULL before calling.
        (S_SET_ALIGN): Similar for s_set_align.
        (S_SET_OTHER): New.
        (S_SET_DESC): New.
        (S_GET_TYPE): New.
        (S_SET_TYPE): New.
        (SEPARATE_STAB_SECTIONS): New.
        (INIT_STAB_SECTION): New.
        (EMIT_SECTION_SYMBOLS): New.
        (AOUT_STABS) [OBJ_MAYBE_AOUT]: Define.

        * config/obj-elf.h: Update GPL notice to v2.
        Mention that this file is included from obj-multi.h.
        (obj_begin): Wrap definition in ifndef.
        (elf_file_symbol): Constify declaration.
        (obj_app_file): Ditto.
        (SEPARATE_STAB_SECTIONS, INIT_STAB_SECTION, OBJ_PROCESS_STAB):
        Wrap in ifndef SEPARATE_STAB_SECTIONS.

        * config/obj-elf.c (elf_s_set_other): New.
        (elf_file_symbol): Constify argument.
        (elf_separate_stab_sections): New.
        (elf_init_stab_section): New.
        (elf_format_ops): Add new members.  Remove comma at end.

        * config/obj-ecoff.c (ecoff_separate_stab_sections): New.
        (ecoff_format_ops): Add new fields.  Remove comma at end.
        Mention inconsistency for emit_section_symbols.

        * config/obj-coff.h (c_dot_file_symbol): Constify declaration.

        * config/obj-coff.c (c_dot_file_symbol): Constify argument.
        (coff_separate_stab_sections): New.
        (coff_format_ops): Add new members.

        * config/obj-aout.c (obj_aout_sec_sym_ok_for_reloc): New.
        (obj_aout_s_set_other): New.
        (obj_aout_s_set_desc): New.
        (obj_aout_s_get_type): New.
        (obj_aout_s_set_type): New.
        (obj_aout_separate_stab_sections): New.
        (aout_format_ops): New members added.  Use obj_aout_process_stab,
        not 0.  Use obj_aout_sec_sym_ok_for_reloc, not 0.
        (obj_aout_frob_symbol): Add ATTRIBUTE_UNUSED to args as
        appropriate.
        (obj_aout_line, obj_aout_weak, obj_aout_type): Ditto.

2000-05-22  Alan Modra  <alan@linuxcare.com.au>

        * config/tc-i386.c (tc_i386_fix_adjustable): Prevent adjustment
        for OBJ_MAYBE_ELF too.  Use S_IS_EXTERNAL instead of S_IS_EXTERN.
        (md_estimate_size_before_relax): Ensure jumps to weak and
        externally visible symbols are relocatable.

Sat May 20 16:41:55 2000  Hans-Peter Nilsson  <hp@axis.com>

        * stabs.c (aout_process_stab): Make global.
        (s_desc): Add ATTRIBUTE_UNUSED to args as appropriate.
        * read.h (aout_process_stab): Declare.

        * configure.in (EMULATIONS) [i386aout, i386coff, i386elf]:
        Generalize to *aout, *coff *elf.
        * configure: Regenerated.

        * doc/internals.texi (Object format backend): Say
        SEPARATE_STAB_SECTIONS needs to be nonzero, not just defined.

        * Makefile.am (TARG_ENV_HFILES): Delete te-multi.h.
        * Makefile.in: Regenerated.

2000-05-19  Catherine Moore  <clm@cygnus.com>

        * cgen.h (GAS_CGEN_MAX_FIXUPS): Check if already defined.

2000-05-18  Alan Modra  <alan@linuxcare.com.au>

        * config/tc-hppa.c (md_apply_fix): Mask out immediate bits of
        instruction to reflect change in re_assemble_*.

Thu May 18 10:52:14 2000  Jeffrey A Law  (law@cygnus.com)

        * configure.in (hppa-*-hpux11*): If the cpu is hppa*64*, then
        build PA64 ELF tools.
        * configure: Rebuilt.

2000-05-17  Alan Modra  <alan@linuxcare.com.au>

        * Makefile.am: Regenerate dependencies.
        * Makefile.in: Regenerate.

2000-05-15  Nick Clifton  <nickc@cygnus.com>

        * config/tc-arm.c (struct asm_psr): Add boolean field
        distinguishing between CSPR and SPSR.  Rename 'number' field
        to 'field'.
        (psrs): Rearrange contents to match new asm_psr structure.
        (arm_psr_parse): Move next to psr_required_here.  Make it
        return an asm_psr structure.
        (psr_required_here): Use asm_psr structure returned by
        arm_psr_parse.
        (do_msr): Reorganise to allow psr_required_here to be called
        only once.
        (md_undefined_name): Mark 'name' parameter as unused, since
        the COFF target does not use it.

2000-05-14  David O'Brien  <obrien@FreeBSD.org>

        * config/te-386bsd.h:  Clean up comments to adhere to the GNU coding
        standards.
        * config/te-aux.h:  Likewise.
        * config/te-dpx2.h:  Likewise.
        * config/te-go32.h:  Likewise.
        * config/te-hp300.h:  Likewise.
        * config/te-hppa.h:  Likewise.
        * config/te-i386aix.h:  Likewise.
        * config/te-ic960.h:  Likewise.
        * config/te-interix.h:  Likewise.
        * config/te-nbsd532.h:  Likewise.
        * config/te-pc532mach.h:  Likewise.
        * config/te-ppcnw.h:  Likewise.
        * config/te-psos.h:  Likewise.
        * config/te-sparcaout.h:  Likewise.
        * config/te-sun3.h:  Likewise.
        * config/te-sysv32.h:  Likewise.

2000-05-14  Alan Modra  <alan@linuxcare.com.au>

        * config/tc-h8300.c (do_a_fix_imm): Don't rely on `short' being 16
        bits.  Instead explicitly mask and sign extend.  Do the 8 bit mask
        and sign extend without an if statement.
        (build_bytes): Likewise.

2000-05-14  Kazu Hirata  <kazu@hxi.com>

        * config/tc-h8300.c (do_a_fix_imm): Output a reloc for no
        X_add_symbol L_32 case.

2000-05-14  David O'Brien  <obrien@FreeBSD.org>

        * config/te-freebsd.h: New file.

2000-05-13  Alan Modra  <alan@linuxcare.com.au>

        * asintl.h (gettext, dgettext, dcgettext, textdomain,
        bindtextdomain): Replace defines with those from intl/libgettext.h
        to quieten gcc warnings.

        * NEWS: Mention x86 .arch and -q.

        * config/tc-i386.c (quiet_warnings): New.
        (md_assemble): Use quiet_warnings.
        (md_parse_option): Set quiet_warnings from -q.
        (md_show_usage): Mention -q, delete -m.
        (flag_do_long_jump): Delete.
        (md_parse_option): Remove -m.
        (md_show_usage): Remove -m.
        (md_create_long_jump): Remove useless flag_do_long_jump code.

        * as.c (parse_args): In case OPTION_DEFSYM, use a valueT to hold
        the symbol value, and use bfd_scan_vma if BFD_ASSEMBLER.

2000-05-13  Alan Modra  <alan@linuxcare.com.au>
            Alexander Sokolov <robocop@netlink.ru>

        * doc/c-i386.texi (i386-Arch): New section.
        (i386-Syntax): Mention .intel_syntax and .att_syntax.

        * config/tc-i386.c (cpu_arch_name, cpu_arch_flags): New.
        (smallest_imm_type): Use smallest opcode for shift by one if cpu
        architecture has been given and is not 486.
        (set_cpu_arch): New.
        (md_pseudo_table): Add .arch.
        (md_assemble): Warn if cpu architecture has been given and an
        unsupported instruction.

        * config/tc-i386.h (SMALLEST_DISP_TYPE): Delete.
        Move operand_types bit defines after relevant template field.
        (template): Add cpu_flags.
        (Cpu*): Define.
        (arch_entry): New.

2000-05-12  Alexandre Oliva  <aoliva@cygnus.com>

        * config/tc-mn10300.h (md_end): Define.
        (mn10300_finalize): Declare.
        * config/tc-mn10300.c: Include dwarf2dbg.h.
        (debug_line): Define.
        (md_assemble): Generate dwarf2 line info.
        (mn10300_finalize): New function.  Finalize dwarf2 info.

2000-05-11  Ulf Carlsson  <ulfc@engr.sgi.com>

        * config/tc-mips.c (md_estimate_size_before_relax): Use the
        external version of the relocation for weak symbols.

2000-05-08  David Mosberger  <davidm@hpl.hp.com>

        * config/tc-ia64.c (output_P7_format, case mem_stack_f): Output fixed
        frame size in units of 16 bytes, as required per SW Conventions manual.
        (output_unw_records): Output info-block header as a dword to get
        byte-order right.

2000-05-08  Alan Modra  <alan@linuxcare.com.au>

        * as.h: #include "file", not <file> on files from ../include.
        (as_abort, as_fatal): Add ATTRIBUTE_NORETURN.
        * config/tc-m68k.c (m68k_ip): Fix signed/unsigned warnings.
        (md_convert_frag): Add ATTRIBUTE_UNUSED.
        (tc_coff_symbol_emit_hook): Ditto.
        (OPTCOUNT): Cast to int to avoid compiler warning.
        (md_begin): Fix signed/unsigned warnings.

2000-05-08  Michael Sokolov  <msokolov@ivan.Harhan.ORG>

        * config/tc-m68k.c (md_convert_frag_1): Abort if we end up in the
        ABRANCH LONG case for a conditional branch on a 68000.
        (md_estimate_size_before_relax): Likewise.  Also handle
        flag_short_refs correctly for ABRANCH, BCC68000, and DBCC.
        (m68k-ip: case ABSL): Relax absolute references to 16-bit
        PC-relative on all CPUs.
        (md_estimate_size_before_relax): Likewise.

2000-05-04  Alan Modra  <alan@linuxcare.com.au>

        * as.c (parse_args): Just mention current year in printed
        copyright message.

2000-05-03  J.T. Conklin  <jtc@redback.com>

        * config/tc-ppc.c (pre_defined_registers): Add entries for vector
        unit registers.
        (md_parse_option): Recognize -m7400.

2000-05-03  Ian Lance Taylor  <ian@zembu.com>

        * config/atof-ieee.c (gen_to_words): When adding carry back in,
        don't permit lp to become less than the words array.

2000-05-03  Rodney Brown  <RodneyBrown@pmsc.com>

        config/tc-mcore.c (md_apply_fix3): BFD_RELOC_MCORE_PCREL_IMM11BY2
        Fix little-endian case.

2000-05-03  David O'Brien  <obrien@NUXI.com>

        * as.c (parse_args): Update copyright.

2000-05-03  Mark Elbrecht  <snowball3@bigfoot.com>

        * config/tc-i386.h (SUB_SEGMENT_ALIGN): If TE_GO32, return 4
        for the .bss section too.

2000-05-02  Alan Modra  <alan@linuxcare.com.au>

        * configure.in: Set em=linux for hppa-*-linux.
        * configure: Regenerate.
        * doc/Makefile.in: Regenerate with correct automake.

        * frags.c (frag_grow): Sanity check chunk_size.

        * config/obj-elf.h: #include "bfd.h" not <bfd.h>
        * config/obj-som.h: Likewise.
        * config/obj-ieee.h: Likewise.

        * config/tc-hppa.h: Test BFD_ARCH_SIZE, not BFD64.

        * config/tc-hppa.c (log2): Only compile when OBJ_SOM.
        (md_pseudo_table): Fully initialise OBJ_ELF cases.
        (fix_new_hppa): Add ATTRIBUTE_UNUSED to args as appropriate.
        (pa_ip): low_sign_unext now returns via function value.  Use
        re_assemble_* instead of dis_assemble_* and
        INSERT_FIELD_AND_CONTINUE combination.  Don't call sign_unext
        unnecessarily.
        (md_convert_frag): Add ATTRIBUTE_UNUSED to args as appropriate.
        (md_section_align, md_parse_option, md_show_usage,
        md_undefined_symbol, pa_align, pa_block, pa_brtab, pa_try,
        pa_callinfo, pa_code, pa_comm, pa_end, pa_enter, pa_entry,
        pa_exit, pa_export, pa_import, pa_label, pa_leave, pa_level,
        pa_origin, pa_param, pa_proc, pa_procend, pa_space, pa_spnum,
        pa_version, pa_compiler, pa_copyright, pa_data, pa_fill, pa_lsym,
        pa_text): Likewise.
        (md_apply_fix): Change type of new_val to offsetT.  Delete w1, w2,
        w, resulti.  Add insn, val.  Move bfd_get_32 and bfd_put_32
        outside of switch.  Correct mask and shifting errors in case 10
        and case -11.  In case 21, compare against signed range to suit
        hppa_field_adjust changes.  In case 12, use re_assemble_12.  In
        case 17 and case 22, use offsetT variable to properly check range.
        Use re_assemble_* here too.
        (evaluate_absolute): Change type of value to offsetT.  Call
        hppa_field_adjust to do the work for us.
        (pa_parse_cmpb_64_cmpltr): Delete save_s.
        (pa_parse_cmpib_64_cmpltr): Ditto.
        (pa_build_unwind_subspace): Delete unused var subseg.  Change type
        of i to unsigned int.
        (pa_type_args): Conditionally declare symbol if OBJ_SOM.
        (pa_end_of_source): Return type is void.

Mon May  1 08:54:23 2000  Catherine Moore  <clm@cygnus.com>

        * macro.c (macro_expand_body): Don't prepend macro number with zeroes.

Mon May  1 14:19:39 2000  Denis Chertykov  <denisc@overta.ru>

        * config/tc-avr.c: ATTRIBUTE_UNUSED added to the necessary places.
        More comments added.
        (md_begin): Removed "construct symbols for each register name".
        Because register names conflicts with GCC generated function
        names.
        (avr_operand): Now constant numbers can be used as a register
        identifiers (0 as r0, 31 as r31).
        (md_assemble): use skip_space () before parsing instruction
        operands.

2000-05-01  Alan Modra  <alan@linuxcare.com.au>

        * configure.in: Set bfd_gas=yes on i386-*-pe and i386-*-nt* to
        ensure all pe targets use bfd.  Remove unnecessary bfd_gas=yes on
        arm-*-netbsd* and arm-*-wince as this is set for all arm*.
        * configure: Regenerate.

2000-04-29  Andreas Jaeger  <aj@suse.de>

        * as.h: Correctly check GCC version.

2000-04-26  David O'Brien  <obrien@FreeBSD.org>

        * doc/as.1: Fix unbalanced brackets.

        * config/tc-i386.c (comment_chars): Don't use '/' as comment start if
        TE_FreeBSD.
        (line_comment_chars): Set to '/' if TE_FreeBSD.

Tue Apr 25 11:02:02 2000  Jeffrey A Law  (law@cygnus.com)

        * configure.in: Configury support for PA64 (currently disabled).
        * configure: Rebuilt.

2000-04-25  Machida Hiroyuki  <machida@sm.sony.co.jp>

        * config/tc-mips.c (s_change_sec): Use record_alignment, not
        bfd_set_section_alignment.

2000-04-25  Alan Modra  <alan@linuxcare.com.au>

        * config/tc-i386.c (offset_in_range): Ensure shift counts are less
        than 32.

2000-04-24  Nick Clifton  <nickc@cygnus.com>

        * doc/c-arm.texi (ARM Directives): Document behaviour of .align 0.
        * doc/as.texinfo (Align): Include arm and strongarm in list of
        targets that have the second form of the behaviour of the .align
        directive.

2000-04-24  Mark Klein <mklein@dis.com>

        * config/obj-som.c: Terminate obj_pseudo_table.

Mon Apr 24 15:21:11 2000  Clinton Popetz  <cpopetz@cygnus.com>

        * as.c (parse_args): Allow md_parse_option to override -a listing
        option.
        * config/obj-coff.c (add_lineno): Change type of offset parameter
        from "int" to "bfd_vma."
        * config/tc-ppc.c (md_pseudo_table): Add "llong" and "machine."
        (ppc_mach, ppc_subseg_align, ppc_target_format): New.
        (ppc_change_csect): Align correctly for XCOFF64.
        (ppc_machine): New function, which discards "ppc_machine" line.
        (ppc_tc): Cons for 8 when code is 64 bit.
        (md_apply_fix3): Don't check operand->insert.  Handle 64 bit
        relocations.
        (md_parse_option): Handle -a64 and -a32.
        (ppc_xcoff64): New.
        * config/tc-ppc.h (TARGET_MACH): Define.
        (TARGET_FORMAT): Move to function.
        (SUB_SEGMENT_ALIGN): Use ppc_subseg_align.

Sun Apr 23 16:45:45 2000  Denis Chertykov  <denisc@overta.ru>

        * config/tc-avr.c: New AVR_ISA_ defined.
        (md_assemble): Handle opcodes with optional operands (lpm,elpm).
        (avr_operand): Handle 'a', 'v' and 'z' constraint letters needed
        for `fmul', `movw' and `lpm R,Z' instructions.
        (avr_operands): Warn if current opcode is a two-word instruction
        and previous opcode was cpse/sbic/sbis/sbrc/sbrs.
        (avr_opcodes): New commands added.
        (REGISTER_P): Check 'a' and 'v' constraint letters.
        (mcu_types): New MCU added.

2000-04-22  Timothy Wall  <twall@cygnus.com>

        * config/tc-ia64.c (pseudo_func[]): Add new "nat" entry equivalent
        to "natval".
        (operand_match): Conditionally insert default bit values for IMMU9.

2000-04-14  Matthew Green  <mrg@cygnus.com>

        * configure.in: Add NetBSD/sparc ELF and NetBSD/sparc64 support.
        * configure: Rebuilt.

Fri Apr 21 14:29:43 2000  Jeffrey A Law  (law@cygnus.com)
                          Jason Eckhardt  <jle@cygnus.com>

        * config/tc-hppa.c (md_apply_fix): Handle new PA2.0 formats.

        * config/tc-hppa.c (CHECK_ALIGN): New macro.
        Added handling of new operand types l,y,&,fe,fE,fx.

Fri Apr 21 13:20:53 2000  Richard Henderson  <rth@cygnus.com>
                          David Mosberger  <davidm@hpl.hp.com>
                          Timothy Wall <twall@cygnus.com>
                          Andrew MacLeod  <amacleod@cygnus.com>
                          Jim Wilson  <wilson@cygnus.com>

        * Makefile.am (CPU_TYPES): Add ia64.
        (TARGET_CPU_CFILES): Add config/tc-ia64.c.
        (TARGET_CPU_HFILES): Add config/tc-ia64.h.
        * Makefile.in: Rebuild.
        * app.c (do_scrub_chars): Handle DOUBLESLASH_COMMENTS.
        * configure: Rebuild.
        * configure.in: Recognize ia64 as cpu type.  Set bfd_gas.
        (ia64-*-elf*, ia64-*-linux-gnu*): New targets.
        * expr.c (expr): Handle md_optimize_expr.
        * read.c (LEX_HASH): Add comment.
        * config/tc-ia64.c, config/tc-ia64.h: New files.

2000-04-21  Richard Henderson  <rth@cygnus.com>

        * config/tc-d30v.c (write_2_short): Disregard opcode1->ecc when
        bundling a non-delayed branch type instruction.

2000-04-20  Alexandre Oliva  <aoliva@cygnus.com>

        * config/tc-mn10300.c (HAVE_AM30): Define.
        (md_assemble): Use it.

2000-04-19  Alan Modra  <alan@linuxcare.com.au>

        * config/obj-elf.c (obj_elf_change_section): Check for changed
        section attributes.

        * Makefile.am: (CPU_MULTI_VALID): Remove.
        (MULTI_CPU_TYPES): Define.
        (MULTI_CPU_OBJ_VALID): Define.
        (DEPTC): Use the above.
        (DEPOBJ): Same here.
        (DEP2): And here.
        Regenerate dependencies.
        * Makefile.in: Regenerate.

2000-04-19  Michael Sokolov  <msokolov@ivan.Harhan.ORG>

        * Makefile.am (YACC, LEX): Get them from configure.

2000-04-18  H.J. Lu  (hjl@gnu.org)

        * config/tc-i386.c (offset_in_range): Use addressT instead of
        bfd_vma for non-bfd assemblers.

2000-04-17  Alan Modra  <alan@linuxcare.com.au>

        * config/tc-i386.c (offset_in_range): Sign extend val so BFD64
        doesn't give spurious errors.

2000-04-14  Michael Sokolov  <msokolov@ivan.Harhan.ORG>

        * as.h (SEEK_SET): Define if undefined.

2000-04-13  Alan Modra  <alan@linuxcare.com.au>

        * config/tc-arm.c (md_apply_fix3): Don't use UL suffix on
        constants, and don't assume offsetT is 32 bits.

2000-04-12  Andrew Cagney  <cagney@b1.cygnus.com>

        * config/tc-d10v.h: Include "write.h" to get definition of fixS.
        (md_pcrel_from_section): Add prototype.
        (d10v_fix_adjustable): Add prototype.
        (d10v_force_relocation): Replace 'struct fix' with 'fixS'.

        * config/tc-d10v.c (md_apply_fix3): Add paren around &&.

2000-04-12  Nick Clifton  <nickc@cygnus.com>

        * config/tc-d10v.c (find_opcode): Correctly calculate position of
        symbol in frag chain.

2000-04-10  Alan Modra  <alan@linuxcare.com.au>

        * config/tc-i386.c (fits_in_signed_byte): Change arg to offsetT.
        (fits_in_unsigned_byte, fits_in_unsigned_word): Ditto.
        (fits_in_signed_word, smallest_imm_type): Ditto.
        (md_assemble): Use an offsetT var to hold offsetT values, not a
        long.
        (offset_in_range): New.
        (md_assemble): Use it.
        (md_convert_frag): Change type of target_address, opcode_address,
        and displacement_from_opcode_start to offsetT.
        (md_create_short_jump): Change type of offset to offsetT.
        (md_create_long_jump): Ditto.
        (md_apply_fix3): Use -4, not 0xfffffffc for BFD_RELOC_386_PLT32.
        (md_chars_to_number): Remove.
        (output_invalid): Remove duplicate prototype.

2000-04-09  Nick Clifton  <nickc@cygnus.com>

        * Makefile.am (CPU_TYPES): Add 'avr'.
        (TARGET_CPU_CFILES): Add 'tc-avr.c'.
        (TARGET_CPU_HFILES): Add 'tc-avr.h'.

        * Makefile.in: Regenerate.

        * doc/as.texinfo: Add M32R documentation.

Fri Apr  7 15:56:57 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * configure.in (WARN_CFLAGS): Set to -W -Wall by default.  Add
        --enable-build-warnings option.
        * Makefile.am (AM_CFLAGS, WARN_CFLAGS): Add definitions.
        * Makefile.in, configure: Re-generate.

2000-04-07  Nick Clifton  <nickc@cygnus.com>

        * config/tc-arm.c (md_apply_fix3): Treat BFD_RELOC_ARM_PCREL_BLX
        in the same way as BFD_RELOC_ARM_PCREL_BRANCH, and
        BFD_RELOC_THUMB_PCREL_BLX lie BFD_RELOC_THUMB_PCREL_BRANCH.
        (tc_gen_reloc): Accept BFD_RELOC_{ARM|THUMB}_PCREL_BLX.
        (arm_force_relocation): Force relocations for
        BFD_RELOC_{ARM|THUMB}_PCREL_BLX as well.

Wed Apr  5 22:26:32 2000  J"orn Rennecke <amylaar@cygnus.co.uk>

        * config/tc-sh.c (get_operands): There's no third operand if the
        first operand is an immediate.

Wed Apr  5 22:07:19 2000  J"orn Rennecke <amylaar@cygnus.co.uk>

        * config/tc-sh.c (immediate): Delete.
        (sh_operand_info): Add immediate member.
        (parse_reg): Use A_PC for pc.
        (parse_exp): Add second argument 'op'.  All callers changed.
        (parse_at): Expect pc to be coded as A_PC.
        Use immediate field in *op.
        (insert): Add fourth argument 'op'.  All callers changed.
        (build_relax): Add second argument 'op'.  All callers changed.
        (insert_loop_bounds): New function.
        (build_Mytes): Remove DISP_4.
        Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}.  Add REPEAT.
        (assemble_ppi): Use immediate field in *operand.
        (sh_force_relocation): Handle BFD_RELOC_SH_LOOP_{START,END}.
        (md_apply_fix): Likewise.
        (tc_gen_reloc): Likewise.  Check for a pcrel BFD_RELOC_SH_LABEL.

Wed Apr  5 06:35:45 2000  Alexandre Oliva  <oliva@lsd.ic.unicamp.br>

        * config/tc-sparc.c (sparc_ip): Avoid string pasting.

Tue Apr  4 19:27:50 2000  Hans-Peter Nilsson  <hp@axis.com>

        * internals.texi (CPU backend): Document
        TC_CHECK_ADJUSTED_BROKEN_DOT_WORD.

2000-04-04  Alan Modra  <alan@linuxcare.com.au>

        * po/gas.pot: Regenerate.

        * as.c (show_usage): Restore translated part of bug string.
        * gasp.c (show_usage): Likewise.

        * Makefile.am (MKDEP): Use gcc -MM rather than ../mkdep.
        (DEP): Quote when passing vars to sub-make.  Use "mv -f" rather
        than move-if-change.
        (DEP1): Modify for "gcc -MM".
        (DEPTC): Likewise.
        (DEPOBJ): Likewise.
        (DEP2): Likewise.
        (CLEANFILES): Add DEPTCA, DEPOBJA, DEP2a, DEPA.
        Update dependencies.
        * Makefile.in: Regenerate.

2000-04-03  Alexandre Oliva  <aoliva@cygnus.com>

        * config/tc-mn10300.c (md_pseudo_table): Use constant names.
        (md_begin): Likewise.
        (HAVE_AM33): New macro.
        (md_assemble): Use it.  Match r_regs and xr_regs only if
        HAVE_AM33.

2000-04-03  Alan Modra  <alan@linuxcare.com.au>

        * as.h: #include "bin-bugs.h"
        * as.c (show_usage): Use REPORT_BUGS_TO.
        * gasp.c: #include "bin-bugs.h"
        (show_usage): Use REPORT_BUGS_TO.

        * config/tc-sparc.c (md_show_usage): Add a trailing newline.

Mon Apr  3 13:56:03 2000  Hans-Peter Nilsson  <hp@axis.com>

        * write.c (write_object_file) [! WORKING_DOT_WORD]: If defined,
        call TC_CHECK_ADJUSTED_BROKEN_DOT_WORD for each word after
        adjustments.

2000-04-03  Alan Modra  <alan@linuxcare.com.au>

        * config/tc-i386.c (i386_immediate): Don't assume a constant
        immediate is necessarily 16 bits when in 16 bit code mode.
        (md_assemble): Instead set guess_suffix here after we have checked
        registers.

2000-04-02  Richard Henderson  <rth@cygnus.com>

        * config/tc-d30v.c (check_range): Allow signed or unsigned 32-bit
        quantities.  Correct right shift sign extension.
        (build_insn): Make `number' unsigned long.  Mask top 6 bits of
        32-bit value when shifting into place.

2000-04-01  Ian Lance Taylor  <ian@zembu.com>

        * app.c: Add ATTRIBUTE_UNUSED as needed.
        * config/tc-ppc.c: Likewise.
        (ppc_size): Make unsigned long.
        (ppc_insert_operand): Add casts to avoid warnings.

2000-03-31  Nick Clifton  <nickc@cygnus.com>

        * config/tc-d10v.h (md_flush_pending_output): Define.

2000-03-29  Nick Clifton  <nickc@cygnus.com>

        * config/tc-sh.h (SEG_NAME): New macro: return the name of a
        segment.  Works for both BFD_ASSEMBLER and others.
        (SUB_SEGMENT_ALIGN): Use SEG_NAME.

2000-03-29  Nick Clifton <nickc@cygnus.com

        * config/tc-arm.c (tinsns): Add "bal" instruction pattern.

2000-03-28  Alan Modra  <alan@linuxcare.com.au>

        * listing.c (LISTING_LHS_WIDTH): Default depends on
        LISTING_WORD_SIZE.
        (LISTING_LHS_WIDTH_SECOND): Default to LISTING_LHS_WIDTH.

2000-03-27  Ian Lance Taylor  <ian@zembu.com>

        * config/tc-sh.c (md_show_usage): Use backslash before newline in
        string literal.

2000-03-27  Alan Modra  <alan@linuxcare.com.au>

        * config/tc-avr.h (TC_HANDLES_FX_DONE): Define.

        * config/tc-avr.c (mcu_types): Add missing initialiser.
        (md_pcrel_from_section): Add prototype.
        (avr_operand): Remove redundant test of unsigned < 0.
        (avr_cons_fix_new): Ensure exp_mod_pm zero on function exit.

2000-03-27  Denis Chertykov  <denisc@overta.ru>

        * config/tc-avr.c: New file for AVR support.
        * config/tc-avr.h: Likewise.
        * configure.in: Add AVR support.
        * configure: Regenerate.

2000-03-26  Timothy Wall <twall@cygnus.com>

        * gasp.c (macro_op): Add new argument to check_macro call.
        Macro structure definitions moved to macro.h
        * sb.h:  Add argument to prototype for input_scrub_include_sb.
        * input-scrub.c (input_scrub_include_sb): Allow disabling of sb
        nesting checks with an additional flag.
        (struct input_save): Add flag to indicate whether current sb
        should be checked for proper macro/conditional nesting.
        (input_scrub_push/pop): Save/restore nest check flag.
        (input_scrub_next_buffer): Ditto.  Also call end of macro hook if
        defined.
        * macro.c (check_macro):  Allow caller to retrieve parsed macro
        information if a pointer is provided.  This information may be
        used by the new macro hooks.
        * macro.h: Update prototype for check_macro.  Macro struct
        definitions moved here from macro.c/gasp.c.
        * read.c (read_a_source_file): Add parameter to check_macro call,
        and pass macro info to the macro hook, if defined.
        (input_scrub_insert_line): New.  Allow insertion of a line of
        characters into the input stream.
        (input_scrub_insert_file): New.  Allow insertion of an arbitrary
        file into the input stream.
        (s_include): Use input_scrub_insert_file.
        * internals.texi: Document new macro hooks.
        * as.h: New prototypes added.

2000-03-26  Alan Modra  <alan@linuxcare.com.au>

        * config/tc-i386.c: Don't start any as_bad or as_warn message with
        an initial capital letter.
        (i386_index_check): Reindent.

2000-03-19  Nick Clifton  <nickc@cygnus.com>

        * config/tc-arm.c (md_apply_fix3): Fix bug detecting overflow of pc
        relative branches.

2000-03-17 Thomas de Lellis <tdel@windriver.com>

        * config/tc-arm.c (do_t_adr): Flag "adr Rd,label"
        instruction operand bad if Rd > 7 when generating
        thumb instructions. Prevents for example,
        "adr r12,label" from silently failing and generating
        the wrong instruction.

2000-03-17  Nick Clifton  <nickc@cygnus.com>

        * config/tc-arm.c (md_apply_fix3): Handle same-section relocations
        that have a destingation >= 0x400000.
        Fix compile time warning messages.

Thu Mar 16 23:45:16 2000  J"orn Rennecke <amylaar@cygnus.co.uk>

        * config/tc-sh.c (md_begin): When encountering insn that are
        not supported by the current arch, only change the name if
        its contents are the same as prev_name.
        (get_specific): If the the architecture doesn't match, fail.

Thu Mar 16 21:18:13 2000  J"orn Rennecke <amylaar@cygnus.co.uk>

        * config/tc-sh.c (IDENT_CHAR): Define.
        (parse_reg): Use it instead of isalnum.  Put r[0..7]_bank operand
        matching back where it came from.

Thu Mar 16 20:58:10 2000  J"orn Rennecke <amylaar@cygnus.co.uk>

        * config/tc-sh.c (md_show_usage): Add description of -dsp.

2000-03-15  Jonathan Larmour  <jlarmour@redhat.co.uk>

        * config/tc-sh.c (parse_reg): Match r[0..7]_bank operands before
        normal operands.

2000-03-15  Kazu Hirata  <kazu@hxi.com>

        * config/tc-h8300.c: Add ATTRIBUTE_UNUSED as appropriate.

Mon Mar 13 22:02:59 2000  Hans-Peter Nilsson  <hp@axis.se>

        * expr.c (operand) [case 'f']: When testing if '0f' can start a
        floating-point-number, make sure 'f' is in FLT_CHARS.

Sat Mar 11 00:01:39 2000  Hans-Peter Nilsson  <hp@axis.se>

        * read.c (TC_IMPLICIT_LCOMM_ALIGNMENT): New default-definition.
        (s_lcomm_internal): Use it.
        * doc/internals.texi (CPU backend): Document it.
        * config/obj-evax.h (TC_IMPLICIT_LCOMM_ALIGNMENT): Set to 2**3
        bytes.

2000-03-10  Geoffrey Keating  <geoffk@cygnus.com>

        * config/tc-mips.c (mips_ip): Don't put stuff in .rodata
        when embedded-pic.

        * config/tc-mips.c (SWITCH_TABLE): The ELF embedded-pic
        implementation doesn't have special handling for switch
        statements.
        (macro_build): Allow for code in sections other than .text.
        (macro): Likewise.
        (mips_ip): Likewise.
        (md_apply_fix): Do pc-relative relocation madness for MIPS ELF.
        Don't perform relocs if we will be outputting them.
        (tc_gen_reloc): For ELF, just use fx_addnumber for pc-relative
        relocations.  Allow BFD_RELOC_16_PCREL_S2 relocs when
        embedded-pic.

2000-03-09  Catherine Moore  <clm@cygnus.com>

        * config/tc-m32r.c (m32r_fix_adjustable):  Look up the
        relocation type based on the entry in the fixup structure.
        Put S_IS_EXTERN processing back in.

2000-03-08  H.J. Lu  (hjl@gnu.org)

        * Makefile.am (install-exec-tooldir): Depend on
        install-exec-bindir for parallel make.
        * Makefile.in: Regenerated.

2000-03-06  Nick Clifton  <nickc@cygnus.com>

        * config/tc-m32r.c (struct md_longopts): Add -m32r command line
        switch.
        (md_parse_option): Parse -m32r command line switch - disable m32rx
        compatability.
        (md_show_usage): Document new option.

        * doc/Makefile.am (CPU_DOCS): Add c-m32r.texi.
        * doc/Makefile.in: Regenerate.
        * doc/c-m32r.texi (M32R-Opts): Document new command line switch.

2000-03-02  Michael Meissner  <meissner@redhat.com>

        * config/tc-d30v.c (check_range): Remove code that incorrectly
        sign extended values where bits < 32.

2000-03-02  H.J. Lu  (hjl@gnu.org)

        * configure.in: Support --enable-targets=all on ia32.
        * configure: Regenerated.

2000-03-01  Nick Clifton  <nickc@cygnus.com>

        * gasp.c (do_align): Remove bogus check of alignment value.

2000-02-27  Thomas de Lellis  <tdel@windriver.com>

        * config/obj-elf.c (elf_frob_symbol): Remove code which when
        TC_PPC was defined forced the type of a symbol with no other type
        to be BSF_OBJECT.

2000-02-27  Hans-Peter Nilsson  <hp@axis.com>

        * doc/internals.texi (CPU backend): Mention that
        line_separator_chars do not break up comments.  Fix typos for
        LEX_AT and LEX_NAME descriptions.  Document operands for
        TC_EQUAL_IN_INSN, md_operand and md_section_align.  Correct
        description of md_create_short_jump usage.  Document argument for
        md_undefined_symbol.

2000-02-27  Jakub Jelinek  <jakub@redhat.com>

        * config/tc-sparc.c (OPTION_UNDECLARED_REGS): New option.
        (md_parse_option): Handle it.
        (md_show_usage): Document it.

2000-02-27  Ian Lance Taylor  <ian@zembu.com>

        * config/tc-alpha.c (md_assemble): Accept `1' and `9' in an
        opcode, for the instruction `pal19'.  From Andrea Arcangeli
        <andrea@suse.de>.

2000-02-26  Alan Modra  <alan@spri.levels.unisa.edu.au>

        * config/tc-i386.c (i386_immediate): Move constant operand sizing
        from here..
        (md_assemble): To here, before template operands are matched.
        Also ensure a constant immediate is sign extended when we know the
        size is at most 16 bits.  This is to catch cases like "add
        $0xffc0,%ax" where we don't know the size, and thus that the
        immediate can be represented as Imm8S until after parsing the
        register operand.
        (i386_displacement): Similarly sign extend 16 bit constant
        displacements.
        (md_assemble): Relax 16-bit jump constant range check to suit sign
        extended displacements.

2000-02-26  Andreas Jaeger  <aj@suse.de>

        * doc/c-mips.texi (MIPS Opts): Fix typo in last patch.

2000-02-25  Alan Modra  <alan@spri.levels.unisa.edu.au>

        * config/tc-i386.c (md_assemble): Don't swap intersegment jmp and
        call operands when intel_syntax.
        (intel_float_operand): Return 2 for "fi...".
        (i386_operand_modifier): Change "DWORD PTR" test to suit above.
        Return SHORT_MNEM_SUFFIX for "WORD PTR" when "fi...".  Revert
        earlier "SHORT" change.
        (md_assemble): When determining suffix from Regs, exclude
        InOutPortReg.

2000-02-24  Nick Clifton  <nickc@cygnus.com>

        * configure: Add arm-wince, mips-pe and sh-pe targets.
        * configure: Regenerate.

        * config/obj-coff.h (COFF_WITH_PE): Define for mips-pe and
        sh-pe targets.
        (TARGET_FORMAT): Set to "pe-shl" for the sh-pe target and to
        "pe-mips" for the mips-pe target.

        * config/tc-arm.c (insns): Change displacement encoded in BL
        and B instructions if the target port is arm-wince.
        (do_ldst): Do not bias the relocation offset if the target
        port is arm-wince.
        (md_pcrel_from): Add in missing relocation offset bias if the
        target os arm-wince.

        * config/tc-mips.c (mips_target_format): Support COFF flavour.
        (md_begin): Disable -G support for mips-pe target.
        (md_apply_fix): Treat BFD_RELOC_RVA reloc as BFD_RELOC_32.
        * config/tc-mips.h (USE_GLOBAL_POINTER_OPT): Add support for
        COFF flavour.

        * config/tc-sh.c (md_begin): sh-pe target is little endian.
        * config/tc-sh.h (SUB_SEGMENT_ALIGN): If using a BFD
        assembler, just set the alignment to 4.

        * config/te-wince-pe.h: New file for WinCE targets.  Define
        TE_WINCE.

2000-02-25  Alan Modra  <alan@spri.levels.unisa.edu.au>

        * config/tc-i386.c (md_assemble): Swap segments too for intel mode
        string instructions.
        (i386_operand_modifier): Set i.suffix = WORD_MNEM_SUFFIX for SHORT.
        (i386_intel_memory_operand): After finding a segment override,
        check again for no `[' before looking for a displacement.  Bomb if
        more than one displacement rather than silently discarding the
        second and subsequent ones.  Free strings malloc'd by
        build_displacement_string.

2000-02-24  Catherine Moore  <clm@cygnus.com>

        * config/obj-som.c (obj_pseudo_table): Add "weak".
        (obj_som_weak): New routine.

2000-02-24  Alan Modra  <alan@spri.levels.unisa.edu.au>

        * config/tc-i386.c (union i386_op): New.
        (struct _i386_insn): Delete disps[], imms[], regs[].  Add op[].
        Throughout file replace occurences of disps[n], imms[n], regs[n]
        with equivalent op[n].disps, op[n].imms, op[n].regs.  Simplify
        intel mode operand swapping.  Add assert in regKludge and
        fake_zero_displacement code.  Test i.types[n] when outputting
        displacements and immediates.  Combine output of Disp16 with
        Disp32.
        (md_assemble): Don't try to fix broken UNIXWARE_COMPAT opcodes
        when in intel mode by (not) reversing fsub and fdiv operands
        before the template search.  This fails for single operand
        shorthand forms of the instruction, and if UNIXWARE_COMPAT is
        undefined.  Instead fix the base_opcode after we've found the
        template.  Move base_opcode xor with found_reverse_match from
        opcode output code to before this fix so we test for the correct
        opcodes.
        (md_assemble): Don't use strcmp when deciding to ignore the suffix
        check in intel mode.  Instead compare opcodes.

        * config/tc-i386.h (TC_RELOC): Delete.
        * config/tc-i386.c (TC_RELOC): Delete.  Replace usage of TC_RELOC
        with equivalent call to reloc.

        * as.h (flag_m68k_mri): Move declaration after target include, and
        only declare when TC_M68K defined.  Define as zero otherwise.
        (LABELS_WITHOUT_COLONS, NO_PSEUDO_DOT): If undefined, define as 0.
        * app.c (scrub_m68k_mri): Declare only when TC_M68K defined.
        Define as zero otherwise.
        (do_scrub_begin): Use m68k_mri parameter only when TC_M68K defined.
        (struct app_save): Declare scrub_m68k_mri only when TC_M68K.
        (app_push, app_pop): Save scrub_m68k_mri only when TC_M68K.
        (do_scrub_chars): Use LABELS_WITHOUT_COLONS directly rather than
        testing whether defined.
        * cond.c (ignore_input): Use NO_PSEUDO_DOT directly.
        * expr.c (operand): #ifdef unused case labels when TC_M68K undefined.
        * read.c: Use LABELS_WITHOUT_COLONS and NO_PSEUDO_DOT directly
        rather than testing whether defined.
        (s_mri): Set flag_m68k_mri only when TC_M68K defined.
        (parse_mri_cons): Declare and use only when TC_M68K.
        * config/tc-hppa.h (LABELS_WITHOUT_COLONS): Define as 1.
        * config/tc-m68k.h (NO_PSEUDO_DOT): Define as 1.
        * config/tc-m88k.h (NO_PSEUDO_DOT): Define as 1.

        * NEWS: Mention IBM 370 support.

2000-02-23  Richard Henderson  <rth@cygnus.com>

        * config/tc-i386.c (md_assemble): When swapping operands for
        intel_syntax, assume everything that's not Imm or Disp is a
        register.

2000-02-23  Linas Vepstas <linas@linas.org>

        * config/tc-i370.c, config/tc-i370.h: New files.
        * Makefile.am: Add support for Linux/IBM 370.
        * configure.in: Likewise.
        * app.c (do_scrub_begin): Don't lex single quote when TC_I370.
        * config/obj-elf.c: Include elf/i370.h
        (obj_elf_section): Don't do anything special for flag_mri if TC_I370.

        * Makefile.in: Regenerate.
        * configure: Regenerate.

        * doc/c-i370.texi: New file.
        * doc/all.texi: Include it.
        * doc/as.texinfo: And here.
        * doc/Makefile.am(CPU_DOCS): Add c-i370.texi.
        * doc/Makefile.in: Regenerate.

2000-02-19  Michael Meissner  <meissner@redhat.com>

        * config/tc-d30v.c (parallel_ok): Use FLAG_NOT_WITH_ADDSUBppp to
        determine if an instruction can be used in parallel with an ADDppp
        or SUBppp instruction.

2000-02-22  Andrew Haley  <aph@cygnus.com>

        * doc/c-mips.texi (MIPS Opts): Document -mgp32 and -mgp64.

2000-02-22  Andrew Haley  <aph@cygnus.com>

        * config/tc-mips.c (mips_gp32): New variable.
        (macro_build) Use mips_gp32.
        (mips_ip): Ditto.
        (md_longopts): Add "-mgp32" and "-mgp64".
        (md_parse_option): Add OPTION_GP32 and OPTION_GP64.

        (OPTION_M7900): Change offset
        (OPTION_NO_M7900): Ditto.

2000-02-22  Alexandre Oliva  <oliva@lsd.ic.unicamp.br>

        * config/obj-coff.c (add_lineno): Accept non-positive lineno with
        warning, and bump it to 1.

2000-02-22  Ian Lance Taylor  <ian@zembu.com>

        From Brad Lucier <lucier@math.purdue.edu>:
        * dwarf2dbg.c (print_stats): Add cast to force printf argument to
        match format.

2000-02-21  Catherine Moore  <clm@cygnus.com>

        * config/tc-mips.c (MF_HILO_INSN): Define.
        (mips_7000_hilo_fix): Declare.
        (append_insn): Conditionally insert nops after an mfhi/mflo insn.
        (md_parse_option): Check for 7000_HILO_FIX options.
        (OPTION_M7000_HILO_FIX): Define.
        (OPTION_NO_M7000_HILO_FIX): Define.
        * doc/c-mips.texi (-mfix7000): Describe.

2000-02-21  Alan Modra  <alan@spri.levels.unisa.edu.au>

        * listing.c (print_lines): Remove unused variable `end'.

        * config/tc-i386.c (md_assemble): Use `reloc()' to select reloc
        type for JumpInterSegment output. Use enum bfd_reloc_code_real for
        reloc_type when BFD_ASSEMBLER.
        (md_estimate_size_before_relax): Use enum bfd_reloc_code_real for
        reloc_type when BFD_ASSEMBLER. Move common code out of switch
        statement and quell signed vs. unsigned comparison warning.

2000-02-18  Nick Clifton  <nickc@cygnus.com>

        * config/tc-d10v.c (find_opcode): Add a symbol's value to
        the computed frag offset, rather than overwriting it.

Thu Feb 17 00:11:08 2000  J"orn Rennecke <amylaar@cygnus.co.uk>

        * config/tc-sh.c ("elf/sh.h"): Include.
        (sh_dsp, valid_arch, reg_x, reg_y, reg_efg): New static variables.
        (md.begin): Initialize target_arch.
        Only include opcodes in has table that match selected architecture.
        (parse_reg): Recognize register names for sh-dsp.
        (parse_at): Recognize post-modify addressing.
        (get_operands): The leading space is now optional.
        (get_specific): Remove FDREG_N support.  Add support for sh-dsp
        arguments.  Update valid_arch.
        (build_Mytes): Add support for SDT_REG_N.
        (find_cooked_opcode): New function, broken out of md_assemble.
        (assemble_ppi, sh_elf_final_processing): New functions.
        (md_assemble): Use find_cooked_opcode and assemble_ppi.
        (md_longopts, md_parse_option): New option: -dsp.
        * config/tc-sh.h (elf_tc_final_processing): Define.
        (sh_elf_final_processing): Declare.

Fri Feb 11 14:21:51 2000  Jeffrey A Law  (law@cygnus.com)

        * config/tc-hppa.c (pa_build_unwind_subspace): Use subseg_new to create
        the unwinder subspace.  Save the current seg/subseg before creating
        the new seg/subseg.

2000-02-10  Nick Clifton  <nickc@cygnus.com>

        * config/tc-mcore.c (INST_BYTE0): Redefine to handle big and
        little endian targets.
        (INST_BYTE1): Redefine to handle big and little endian
        targets.
        (cpu_type): New type: Select between M340 and M210.
        (parse_psrmod): New function: Parse the PSRCLR and PSRSET
        instructions of the M340.
        (md_assemble): Add support for the MULSH and OPSR classes of
        instructions.
        (md_atof): Add support for little endian targets.
        (md_parse_option): Add support for -EL, -EB and -mcpu command
        line switches.
        (md_convert_frag): Add support for little endian targets.
        (md_apply_fix3): Add support for little endian targets.
        (md_number_to_chars): Add support for little endian targets.

2000-02-10  Timothy Wall  <twall@redhat.com>

        * read.c (read_a_source_file): If TC_START_LABEL_WITHOUT_COLON is
        defined, use it to verify the symbol just read should be a label.

2000-02-10  Timothy Wall  <twall@redhat.com>

        * app.c (do_scrub_chars): Handle "||" for parallel instructions
        when DOUBLEBAR_PARALLEL is defined.  Avoid stripping whitespace
        around colons when KEEP_WHITE_AROUND_COLON is defined.
        * doc/internals.texi (CPU backend): Document DOUBLEBAR_PARALLEL
        and KEEP_WHITE_AROUND_COLON.

2000-02-08  Timothy Wall  <twall@redhat.com>

        * read.c (s_rept): Call do_repeat, which abstracts the repeat
        logic.
        (do_repeat): New.  Abstract repeat logic so that a "break" can be
        implemented.
        (end_repeat): New.  Provide support for a "break" out of the
        repeat loop.
        * read.h: Add prototypes for new functions.

2000-02-08  Timothy Wall  <twall@redhat.com>

        * doc/internals.texi: Document NUMBERS_WITH_SUFFIX macro.
        * as.h: Provide a default NUMBERS_WITH_SUFFIX definition (zero).
        * expr.c: Handle numbers with suffixes if NUMBERS_WITH_SUFFIX is
        non-zero.

2000-02-08  Timothy Wall  <twall@redhat.com>

        * read.c: Added elseif to directives table.
        * read.h: Added prototype for s_elseif.
        * doc/as.texinfo: Added description for elseif.
        * cond.c (s_elseif): New function

2000-02-04  Timothy Wall  <twall@redhat.com>

        * listing.c (print_lines): Remove conditionals causing bug in
        listings.

2000-02-03  Timothy Wall  <twall@cygnus.com>

        * as.h: Define OCTETS_PER_BYTE and OCTETS_PER_BYTE_POWER
        default values.
        * frags.c (frag_new): Calculate fr_fix in octets
        (frag_now_fix) Return offset as target address offset (bytes).
        (frag_now_fix_octets) New - Return offset in octets (8-bit
        quantities).
        * frags.h: Added prototype for frag_now_fix_octets().
        Distinguish between octets and bytes in field descriptions.
        * listing.c (calc_hex): Account for octets vs bytes when
        printing addresses/offsets.
        (print_lines) Ditto.  Also, if LISTING_WORD_SIZE is not 1, and
        target is little-endian, print the octets in a word in big-endian
        order so that the display looks like a proper hexadecimal number,
        instead of having the octets reversed.
        * read.c (do_align): When recording alignment, alignment power
        should be in terms of target bytes (minimum addressible unit)
        instead of octets.
        (do_org) Convert ORG target address (byte) argument into an
        octet offset when generating a variable fragment.
        * symbols.c (resolve_symbol_value): Symbol final value
        converted to a target address offset (bytes) from its octet offset.
        * config/obj-coff.c (coff_frob_symbol): Symbol target address
        offset (bytes) is adjusted by the frag offset (octets) converted
        to bytes.
        (coff_frob_section) Section alignment power is in terms of bytes;
        convert it to an octet alignment power when calculating size (and
        size mask) in octets.  Don't modify the section size in order to
        "align" it for TI COFF, since that format has a different method
        for storing alignment information.

2000-02-01  Timothy Wall  <twall@cygnus.com>

        * stabs.c (generate_asm_file): Escape backslashes in stabs file
        entries, matching the way GCC generates them.  If not escaped, the
        filename is encoded incorrectly.

2000-01-31  Nick Clifton  <nickc@cygnus.com>

        * config/tc-arm.c (reg_table): Add support for ATPCS register
        naming conventions.

2000-01-31  Geoff Keating  <geoffk@cygnus.com>

        * config/obj-coff.h (OBJ_COPY_SYMBOL_ATTRIBUTES): Don't define if
        already defined.
        * config/tc-ppc.h [OBJ_XCOFF] (OBJ_COPY_SYMBOL_ATTRIBUTES):
        New macro.
        * config/tc-ppc.c (ppc_fix_adjustable): Don't look at the frag
        of a symbol when we really care about its value.

2000-01-19  Chandra Chavva  <cchavva@cygnus.com>

        * config/tc-mcore.c (md_assemble): Give warning message if
        operands passes to instruction are more than the spec.

2000-01-27  Thomas de Lellis <tdel@windriver.com>

        * config/tc-arm.c (armadjust_symtab): If the assembler is in
        Thumb mode but the label seen was not declared as '.thumb_func'
        then set the ST_INFO type to STT_ARM_16BIT mode.  This allows
        correct disassembly of Thumb code bounded by non function labels.

2000-01-27  Alan Modra  <alan@spri.levels.unisa.edu.au>

        * Makefile.am (MULTI_CFILES): Add config/e-i386aout.c
        Add dependencies for e-i386aout.o.  Fix 2 comment lines.

        * Makefile.in: Same here.
        Update copyright.

        * configure.in: Set bfd_gas for i386-aout when primary target
        is bfd.  Handle i386aout emulation.  Don't use te_file=multi, as
        we may need the primary te_file.  Remove incorrect comment.

        * configure: Regenerate.

        * config/e-i386aout.c: New file.

        * as.c (USE_EMULATIONS): Move to before print_version_id.
        (struct emulation): Add i386aout.
        (show_usage): Split text strings.  Reformat -a text.  Add --em
        help.
        Update copyright.

        * obj.h (struct format_ops): Add s_get_other and s_get_desc.
        (aout_format_ops): New.
        Update copyright.

        * read.c (s_lcomm_internal): Rewrite OBJ_AOUT,OBJ_BOUT
        preprocessor conditional and add aout USE_EMULATIONS tests.
        (read_a_source_file): Don't pass error strings to printf as
        format arg.
        Update copyright.

        * gasp.c (exp_get_abs): Don't pass error strings to printf as
        format arg.
        (do_data): Same here.
        (process_file): And here.
        Update copyright.

        * symbols.c (colon): Rewrite "already defined" fatal message
        code for aout with USE_EMULATIONS.
        Update copyright.

        * config/obj-aout.c (OBJ_HEADER): Define.
        (obj_pseudo_table): Rename to aout_pseudo_table.  Init all
        fields of sentinel.
        (obj_aout_frob_symbol): Expand S_GET_DESC, S_GET_TYPE,
        S_GET_OTHER, S_SET_TYPE macros since we don't need obj-multi
        forms here.
        (obj_aout_type): Expand S_SET_OTHER here too.
        (obj_read_begin_hook): Remove.
        (aout_pop_insert): New.
        (obj_aout_s_get_other): New.
        (obj_aout_s_get_desc): New.
        (aout_format_ops): New.
        Update copyright.

        * config/obj-aout.h (obj_pop_insert): Define so non-multi usage
        gets aout_pseudo_table.
        (aout_pseudo_table): Declare.
        (obj_read_begin_hook): Define.
        Update copyright.

        * config/obj-coff.c (obj_pseudo_table): Rename to
        coff_pseudo_table.
        (coff_pop_insert): Use coff_pseudo_table.
        (coff_sec_sym_ok_for_reloc): Remove.
        (coff_format_ops): Add 0 entries for s_get_size, s_set_size,
        and comment all zero entries and remove #if 0 code.
        Update copyright.

        * config/obj-coff.h (obj_pop_insert): Define.
        (coff_pseudo_table): Declare.
        Update copyright.

        * config/obj-ecoff.c (ecoff_format_ops): Add 0 entries for
        s_get_size, s_set_size.  Comment all zero entries.
        Update copyright.

        * config/obj-elf.c (elf_s_get_other): New function.
        (obj_read_begin_hook): Rename to elf_obj_read_begin_hook.
        (obj_symbol_new_hook): Rename to elf_obj_symbol_new_hook.
        (elf_format_ops): Add elf_s_get_other, 0 s_get_size entry, and
        comment.
        (obj_elf_parse_section_letters): Don't pass error strings to
        printf as format arg.
        Update copyright.

        * config/obj-elf.h (ECOFF_DEBUGGING): Define when
        OBJ_MAYBE_ECOFF.
        (elf_s_get_other): Declare.
        (S_GET_OTHER) Define as elf_s_get_other if not already
        defined.
        (S_SET_OTHER): Only define when not already defined.
        (elf_obj_read_begin_hook): Declare.
        (obj_read_begin_hook): Define.
        (elf_obj_symbol_new_hook): Declare.
        (obj_symbol_new_hook): Define.
        Update copyright.

        * config/obj-multi.h: Add copyright header and protect against
        multiple inclusion.  Add * to all function pointers.
        (OBJ_HEADER): If defined, include it rather than other defines
        in this file.
        (obj_frob_file_after_relocs): Test for NULL.
        (obj_symbol_new_hook): Here too.
        (obj_sec_sym_ok_for_reloc): And here.
        (S_GET_OTHER): Define.
        (S_GET_DESC): Define.
        (ECOFF_DEBUGGING): Remove as it's done in obj-elf.h
        (OBJ_MAYBE_ELF): Update comment.

        * config/tc-i386.c (i386_immediate): Add OBJ_MAYBE_AOUT to
        OBJ_AOUT preprocessor conditional and handle emulation by
        testing OUTPUT_FLAVOR.
        (i386_displacement): Here too.
        (md_section_align): Similarly here.
        (i386_target_format): Conditionally compile when more than one
        of OBJ_MAYBE_{ELF,COFF,AOUT} defined.  Add aout case.
        (i386_immediate): Fix error message for aout BFD_ASSMBLER.
        (i386_displacement): Here too.
        Update copyright.

        * config/tc-i386.h (AOUT_TARGET_FORMAT): Define for each TE_*.
        Define TARGET_FORMAT for aout only when not multi.
        Update copyright.

        * config/te-multi.h: Delete file as it's identical to te-generic.h

2000-01-15  Alan Modra  <alan@spri.levels.unisa.edu.au>

        * config/tc-i386.h (DWORD_MNEM_SUFFIX): Delete.
        * config/tc-i386.c (DWORD_MNEM_SUFFIX): Rename all occurrences to
        LONG_MNEM_SUFFIX.

        * config/tc-i386.h (INTEL_DWORD_MNEM_SUFFIX): Rename to
        DWORD_MNEM_SUFFIX.
        * config/tc-i386.c (INTEL_DWORD_MNEM_SUFFIX): Here too.  Fix some
        comments.

2000-01-13  Clinton Popetz  <cpopetz@cygnus.com>

        * config/tc-mips.c (mips_do_align): New function.
        * config/tc-mips.h (md_do_align): Define.

2000-01-10  Philip Blundell  <philb@gnu.org>

        * doc/c-arm.texi (ARM Options): Fix typo.
        (ARM-Chars): Correct description of `#'.  Mention  that `;' is a
        line separator for Linux.
        * doc/as.texinfo (Comments): Mention the ARM.

2000-01-10  Philip Blundell  <pb@futuretv.com>

        * configure.in (arm*-*-conix*): New target.
        (arm*-*-linux-gnu*): Match instead of arm-*-linux* and
        armv*-*-linux-gnu.
        * configure: Regenerate.

2000-01-03  Martin v. Loewis  <loewis@informatik.hu-berlin.de>

        * config/obj-elf.c (elf_pseudo_table): Define visibility pseudos.
        (obj_elf_visibility): New function.

        * doc/as.texinfo (Visibility): New node: document visibility
        pseudo ops.

For older changes see ChangeLog-9899