1 2007-10-08 Nick Clifton <nickc@redhat.com>
4 * config/tc-arm.c (md_apply_fix): Correct error message
6 * config/tc-bfin.c (md_apply_fix): Fix error message.
8 (Expr_Node_Gen_Reloc_R): Fix spelling typos in error messages.
10 2007-10-05 H.J. Lu <hongjiu.lu@intel.com>
12 * config/tc-i386.c (build_modrm_byte): Check the first 2 8bit
13 immediate operands directly for instructions with 4 operands.
15 2007-10-04 H.J. Lu <hongjiu.lu@intel.com>
18 * config/tc-i386.c (process_suffix): Clear QWORD suffix if it
19 is ignored in Intel mode.
21 2007-10-04 Helge Deller <deller@gmx.de>
23 * read.c (potable): Add string8, string16, string32 and string64.
24 Add bit size for stringer function.
25 (stringer_append_char): New.
26 (stringer): Use stringer_append_char().
27 * config/obj-coff.c (obj_coff_ident): Add bit size for stringer function.
28 * config/obj-elf.c (obj_elf_ident): Likewise.
29 * config/tc-alpha.c (s_alpha_stringer): Likewise.
30 * config/tc-dlx.c (dlx_pseudo_table): Likewise.
31 * config/tc-hppa.c (pa_stringer): Likewise.
32 * config/tc-ia64.c (md_pseudo_table, pseudo_opcode): Likewise.
33 * config/tc-m68hc11.c (md_pseudo_table): Likewise.
34 * config/tc-mcore.c (md_pseudo_table): Likewise.
35 * config/tc-mips.c (mips_pseudo_table): Likewise.
36 * config/tc-spu.c (md_pseudo_table): Likewise.
37 * config/tc-s390.c (md_pseudo_table): Likewise. Replace '2' by '1'.
38 * doc/as.texinfo (ABORT): Fix identing.
39 (String): Document new string8, string16, string32, string64
41 * NEWS: Mention the new feature.
43 2007-10-03 Nick Clifton <nickc@redhat.com>
46 * config/tc-avr.c (avr_get_constant): Extend error message to
47 mention that the constant must be positive.
49 2007-10-03 Nick Clifton <nickc@redhat.com>
51 * config/tc-avr.c (avr_get_constant):
53 * config/tc-arm.c (s_arm_unwind_handlerdata): Fix spelling typo.
55 (md_assemble): Fix spelling typo.
57 2007-10-03 Alan Modra <amodra@bigpond.net.au>
60 * stabs.c (aout_process_stab): Set BSF_DEBUGGING.
62 2007-10-01 M R Swami Reddy <MR.Swami.Reddy@nsc.com>
64 * config/tc-cr16.c: Replaced 'tabs' with white spaces and
65 added R_CR16_DISP8 as default reloc type for b<cc> instructions.
67 2007-09-30 H.J. Lu <hongjiu.lu@intel.com>
70 * config/tc-i386.c (check_long_reg): Also handle cvttss2si.
71 (check_qword_reg): Also handle cvttsd2si.
73 2007-09-27 Kazu Hirata <kazu@codesourcery.com>
75 * config/m68k-parse.h (m68k_register): Use MBO instead of MBB.
76 (last_movec_reg): Change to MBO.
77 * config/tc-m68k.c (fido_ctrl): Use MBO instead of MBB.
78 (m68k_ip): Use MBO instead of MBO.
79 (init_table): Use MBO instead of MBO. Add an entry for mbo.
81 2007-09-26 Jan Beulich <jbeulich@novell.com>
83 * config/tc-i386.c (build_modrm_byte): Also check for RegEip
84 when considering IP-relative addressing.
86 2007-09-26 Jan Beulich <jbeulich@novell.com>
88 * config/tc-i386.h (md_register_arithmetic): Define.
89 * config/tc-ia64.h (md_register_arithmetic): Likewise.
90 * doc/internals.texi: Document md_register_arithmetic.
91 * expr.c (make_expr_symbol): Force O_register expressions into
93 (expr): Provide default for md_register_arithmetic. Don't resolve
94 adding/subtracting constants to/from registers if
95 md_register_arithmetic is zero.
97 2007-09-26 Jan Beulich <jbeulich@novell.com>
99 * dw2gencfi.c: Conditionalize whole body upon TARGET_USE_CFIPOP.
100 (cfi_finish): Add second empty instance.
102 2007-09-26 Jan Beulich <jbeulich@novell.com>
104 * config/tc-ia64.c (dot_pred_rel): Replace specialized handling
105 with simple call to parse_operand.
107 2007-09-26 Jan Beulich <jbeulich@novell.com>
109 * config/tc-i386.c (NUM_FLAG_CODE): Remove.
111 2007-09-26 Jan Beulich <jbeulich@novell.com>
113 * as.c (itbl_parse): Remove #define.
114 (struct itbl_file_list): Move down and ...
115 (itbl_files): .. conditionalize upon HAVE_ITBL_CPU.
116 (show_usage): Conditionalize printing of --itbl option upon
118 (parse_args): Conditionalize handling of -t/--itbl options upon
119 HAVE_ITBL_CPU. Remove OPTION_INSTTBL and replace its use with
122 2007-09-25 H.J. Lu <hongjiu.lu@intel.com>
124 * config/tc-i386.c (output_insn): Use i.tm.opcode_length to
127 2007-09-25 Nathan Sidwell <nathan@codesourcery.com>
129 * config/tc-m68k.c (LONG_BRANCH_VIA_COND): New.
130 (BRANCHBWPL, FRAG_VAR_SIZE): New.
131 (md_relax_table): Add BRANCHBWPL entries.
132 (m68k_ip): Choose BRANCHBWPL relaxation if necessary.
133 (md_assemble): Use FRAG_VAR_SIZE.
134 (md_convert_frag_1): Add BRANCHBWPL cases.
135 (md_estimate_size_before_relaz): Likewise.
137 2007-09-24 Carlos O'Donell <carlos@codesourcery.com>
139 * config/tc-mips.c (s_align): Set max_alignment to 28.
141 2007-09-20 H.J. Lu <hongjiu.lu@intel.com>
144 * config/tc-i386.c (SCALE1_WHEN_NO_INDEX): Removed.
145 (set_allow_index_reg): New.
146 (allow_index_reg): Likewise.
147 (md_pseudo_table): Add "allow_index_reg" and
148 "disallow_index_reg".
149 (build_modrm_byte): Set i.sib.index to NO_INDEX_REGISTER for
150 fake index registers.
151 (i386_scale): Updated.
152 (i386_index_check): Support fake index registers.
153 (parse_real_register): Return NULL on eiz/riz if fake index
154 registers aren't allowed.
156 2007-09-19 Nick Clifton <nickc@redhat.com>
158 * config/tc-h8300.c (md_apply_fix): Do not abort or handle 8 byte
161 2007-09-19 Bob Wilson <bob.wilson@acm.org>
163 * doc/c-xtensa.texi (Xtensa Immediate Relaxation): Fix "addi" typo.
165 2007-09-18 Bernd Schmidt <bernd.schmidt@analog.com>
167 * config/bfin-parse.y (asm_1): Slightly improve error messages
170 2007-09-18 Alan Modra <amodra@bigpond.net.au>
173 * read.c (emit_expr): Only use long long if required and available.
175 2007-09-17 H.J. Lu <hongjiu.lu@intel.com>
177 * config/tc-i386.c (baseindex): Removed.
178 (build_modrm_byte): Check reg_num for RIP register instead of
180 (i386_index_check): Likewise.
182 2007-09-17 H.J. Lu <hongjiu.lu@intel.com>
185 * config/obj-coff.c (obj_coff_endef): Remove checking size of
186 def_symbol_in_progress.
188 2007-09-17 Evandro Menezes <evandro@yahoo.com>
191 * read.c (emit_expr): Use unsigned long long values in warning
192 message about truncated expressions.
194 2007-09-17 H.J. Lu <hongjiu.lu@intel.com>
196 * config/tc-i386.c (intel_e04): Revert the last change.
198 2007-09-17 Nick Clifton <nickc@redhat.com>
200 * po/es.po: Updated Spanish translation.
202 2007-09-15 H.J. Lu <hongjiu.lu@intel.com>
205 * config/tc-i386.c (intel_e04): Return 1 if cur_token.code is
208 2007-09-14 H.J. Lu <hongjiu.lu@intel.com>
210 * config/tc-i386.c (build_modrm_byte): Adjust comment line
213 2007-09-14 H.J. Lu <hongjiu.lu@intel.com>
215 * config/tc-i386.c (build_modrm_byte): Use (A || B) instead
218 2007-09-14 H.J. Lu <hongjiu.lu@intel.com>
220 * config/tc-i386.c (build_modrm_byte): Adjust indentation.
222 2007-09-14 Michael Meissner <michael.meissner@amd.com>
223 Dwarakanath Rajagopal <dwarak.rajagopal@amd.com>
224 Tony Linthicum <tony.linthicum@amd.com>
226 * NEWS: Add SSE5 support to NEWS file.
228 * config/tc-i386.h (drex_byte): Add fields to allow process_drex
229 and build_modrm_byte to communicate.
230 (DREX_OC0): New SSE5 macro.
231 (DREX_OC0_MASK): Ditto.
233 (DREX_OC1_MASK): Ditto.
234 (DREX_XMEM_X1_X2_X2): Ditto.
235 (DREX_X1_XMEM_X2_X2): Ditto.
236 (DREX_X1_XMEM_X2_X1: Ditto.
237 (DREX_X1_X2_XMEM_X1: Ditto.
238 (DREX_XMEM_X1_X2): Ditto.
239 (DREX_X1_XMEM_X2): Ditto.
240 (drex_byte): New structure to describe the DREX byte.
242 * config/tc-i386.c (process_drex): New function to handle SSE5
244 (build_modrm_byte): Use the information cached away in
245 process_drex in the case of DREX instructions.
246 (i386_insn): Add drex field.
247 (pi): Add debugging of drex field.
248 (md_assemble): Treat SSE5 like SSE3 in instructions with an
249 immediate byte. Move REX field to DREX if this is a DREX
251 (process_operands): Add SSE5 support.
252 (build_modrm_byte): Ditto.
253 (output_insn): Ditto.
255 (i386_align_code): Ditto.
257 2007-09-12 Jan Beulich <jbeulich@novell.com>
259 * config/tc-i386.c (md_assemble): Move handling of extrq/insertq
260 after generic operand swapping, and swap only the immediate operands.
262 2007-09-11 Nathan Sidwell <nathan@codesourcery.com>
264 * config/tc-m68k.c (m68k_ip): Add mcfisa_c case.
265 (m68k_elf_final_processing): Add EF_M68K_CF_ISA_C_NODIV.
267 2007-09-09 H.J. Lu <hongjiu.lu@intel.com>
269 * tc-i386.c (output_insn): Only check SSE4.2 and ABM for 3
272 2007-09-08 H.J. Lu <hongjiu.lu@intel.com>
274 * config/tc-i386.c (cpu_flags_check_x64): Renamed to ...
275 (cpu_flags_check_cpu64): This. Inline.
276 (uints_all_zero): New.
277 (uints_set): Likewise
278 (uints_equal): Likewise
279 (UINTS_ALL_ZERO): Likewise
280 (UINTS_SET): Likewise
281 (UINTS_CLEAR): Likewise
282 (UINTS_EQUAL): Likewise
283 (cpu_flags_and): Likewise.
284 (cpu_flags_or): Likewise.
285 (operand_type_and): Likewise.
286 (operand_type_or): Likewise.
287 (operand_type_xor): Likewise.
288 (cpu_flags_not): Inline and use switch instead of loop.
289 (cpu_flags_match): Updated.
290 (operand_type_match): Likewise.
291 (smallest_imm_type): Likewise.
292 (set_cpu_arch): Likewise.
294 (md_assemble): Likewise.
295 (parse_insn): Likewise.
296 (optimize_imm): Likewise.
297 (match_template): Likewise.
298 (process_suffix): Likewise.
299 (update_imm): Likewise.
300 (finalize_imm): Likewise.
301 (process_operands): Likewise.
302 (build_modrm_byte): Likewise.
303 (i386_immediate): Likewise.
304 (i386_displacement): Likewise.
305 (i386_index_check): Likewise.
306 (i386_operand): Likewise.
307 (i386_target_format): Likewise.
308 (intel_e11): Likewise.
309 (operand_type): Remove implicitregister.
310 (operand_type_check): Updated. Inline.
311 (cpu_flags_all_zero): Removed.
312 (operand_type_all_zero): Likewise.
313 (i386_array_biop): Likewise.
314 (cpu_flags_biop): Likewise.
315 (operand_type_biop): Likewise.
317 2007-09-08 H.J. Lu <hongjiu.lu@intel.com>
319 * Makefile.am: Run "make dep-am".
320 * Makefile.in: Regenerate.
322 2007-09-08 H.J. Lu <hongjiu.lu@intel.com>
324 * configure.in (AC_CHECK_HEADERS): Add limits.h.
325 * configure: Regenerated.
326 * config.in: Likewise.
328 * config/tc-i386.c: Include "opcodes/i386-init.h".
329 (_i386_insn): Use i386_operand_type for types.
330 (cpu_arch_flags): Updated to new types with bitfield.
331 (cpu_arch_tune_flags): Likewise.
332 (cpu_arch_isa_flags): Likewise.
333 (cpu_arch): Likewise.
334 (i386_align_code): Likewise.
335 (set_code_flag): Likewise.
336 (set_16bit_gcc_code_flag): Likewise.
337 (set_cpu_arch): Likewise.
338 (md_assemble): Likewise.
339 (parse_insn): Likewise.
340 (process_operands): Likewise.
341 (output_branch): Likewise.
342 (output_jump): Likewise.
343 (parse_real_register): Likewise.
344 (mode_from_disp_size): Likewise.
345 (smallest_imm_type): Likewise.
347 (type_names): Likewise.
350 (swap_2_operands): Likewise.
351 (optimize_imm): Likewise.
352 (optimize_disp): Likewise.
353 (match_template): Likewise.
354 (check_string): Likewise.
355 (process_suffix): Likewise.
356 (check_byte_reg): Likewise.
357 (check_long_reg): Likewise.
358 (check_qword_reg): Likewise.
359 (check_word_reg): Likewise.
360 (finalize_imm): Likewise.
361 (build_modrm_byte): Likewise.
362 (output_insn): Likewise.
363 (disp_size): Likewise.
364 (imm_size): Likewise.
365 (output_disp): Likewise.
366 (output_imm): Likewise.
368 (i386_immediate): Likewise.
369 (i386_displacement): Likewise.
370 (i386_index_check): Likewise.
371 (i386_operand): Likewise.
372 (parse_real_register): Likewise.
373 (i386_intel_operand): Likewise.
374 (intel_e09): Likewise.
375 (intel_bracket_expr): Likewise.
376 (intel_e11): Likewise.
377 (cpu_arch_flags_not): New.
378 (cpu_flags_check_x64): Likewise.
379 (cpu_flags_all_zero): Likewise.
380 (cpu_flags_not): Likewise.
381 (i386_cpu_flags_biop): Likewise.
382 (cpu_flags_biop): Likewise.
383 (cpu_flags_match); Likewise.
387 (reg16_inoutportreg): Likewise.
391 (disp16_32): Likewise.
393 (baseindex): Likewise.
401 (imm16_32): Likewise.
402 (imm16_32s): Likewise.
403 (imm16_32_32s): Likewise.
404 (operand_type): Likewise.
405 (operand_type_check): Likewise.
406 (operand_type_match): Likewise.
407 (operand_type_register_match): Likewise.
408 (update_imm): Likewise.
409 (set_code_flag): Also update cpu_arch_flags_not.
410 (set_16bit_gcc_code_flag): Likewise.
411 (md_begin): Likewise.
412 (parse_insn): Use cpu_flags_check_x64 to check 64bit support.
413 Use cpu_flags_match to match instructions.
414 (i386_target_format): Update cpu_arch_isa_flags and
415 cpu_arch_tune_flags to i386_cpu_flags type with bitfield.
416 (smallest_imm_type): Check cpu_arch_tune to tune for i486.
417 (match_template): Don't initialize overlap0, overlap1,
418 overlap2, overlap3 and operand_types.
419 (process_suffix): Handle crc32 with 64bit register.
421 (CONSISTENT_REGISTER_MATCH): Likewise.
423 * config/tc-i386.h (arch_entry): Updated to i386_cpu_flags
426 2007-09-06 H.J. Lu <hongjiu.lu@intel.com>
428 * config/tc-i386.c (match_template): Handle invlpga, vmload,
429 vmrun and vmsave in SVME.
430 (process_suffix): Likewise.
432 2007-09-05 H.J. Lu <hongjiu.lu@intel.com>
434 * config/tc-i386.c (i386_index_check): Don't use RegRex
435 on the reg_type field.
436 (parse_real_register): Use `||' instead of `|'.
438 2007-09-04 H.J. Lu <hongjiu.lu@intel.com>
440 * config/tc-i386.c (process_operands): Remove segment override
441 check on SVME instructions.
442 (i386_index_check): Remove memory operand check on SVME
445 2007-09-04 Alan Modra <amodra@bigpond.net.au>
447 * config/tc-spu.c (struct spu_insn): Delete "flag". Add "reloc".
448 (md_assemble): Update init of insn. Use insn.reloc instead of
449 calculating from flag.
450 (get_imm): Set reloc rather than flag.
451 (calcop): Formatting.
453 2007-08-29 Daniel Jacobowitz <dan@codesourcery.com>
455 * dwarf2dbg.c (dwarf2_directive_loc): Emit duplicate .loc directives.
457 2007-08-28 Daniel Jacobowitz <dan@codesourcery.com>
459 * doc/c-arc.texi: Fix typo.
461 2007-08-28 H.J. Lu <hongjiu.lu@intel.com>
463 * config/tc-i386.c (process_suffix): Handle cmpxchg8b in
466 2007-08-28 Nathan Sidwell <nathan@codesourcery.com>
468 * config/tc-m68k.c (mcf52235_ctrl): Add cache registers.
469 (mcf5253_ctrl): Add RAMBAR, MBAR, MBAR2.
471 (m68k_cpus): Adjust 5407 entry.
473 2007-08-28 Maxim Kuvyrkov <maxim@codesourcery.com>
475 * config/tc-m68k.c (mcf51qe_ctrl): Define 51QE control registers.
476 (m68k_cpus): Define 51QE cpu.
478 2007-08-28 Mark Shinwell <shinwell@codesourcery.com>
479 Joseph Myers <joseph@codesourcery.com>
481 * as.c (main): Flush stderr before printing listings to ensure
482 consistent output order across platforms.
484 2007-08-28 Robert Sebastian Gerus <arachnist@gmail.com>
486 * configure.tgt: Add support for i[3-7]86-*-dragonfly*.
488 2007-08-24 Joseph Myers <joseph@codesourcery.com>
489 Paul Brook <paul@codesourcery.com>
492 * as.h (remap_debug_filename, add_debug_prefix_map): Declare.
493 * as.c (show_usage): Document --debug-prefix-map option.
494 (parse_args): Handle --debug-prefix-map.
495 * dwarf2dbg.c (out_file_list, out_debug_info): Remap debug paths.
496 * stabs.c (stabs_generate_asm_file): Remap debug paths.
497 * Makefile.am (GAS_CFILES): Add remap.c
498 (GENERIC_OBJS): Add remap.o.
499 Regenerate dependencies.
500 * Makefile.in: Regenerate.
501 * doc/as.texinfo (--debug-prefix-map): Document.
503 2007-08-24 Aurelien Jarno <aurel32@debian.org>
505 * config/tc-arm.c (md_apply_fix): Cast bfd_vma values to long
506 before printing them.
508 2007-08-24 Anders Waldenborg <anders@0x63.nu>
509 Alan Modra <amodra@bigpond.net.au>
511 * config/tc-i386.c (lex_got): Don't scan past a comma.
513 2007-08-23 Ben Elliston <bje@au.ibm.com>
515 * config/tc-ppc.c (parse_cpu): Handle "750cl".
516 (pre_defined_registers): Add "gqr0" to "gqr7", "gqr.0" to "gqr.7".
517 (md_show_usage): Document -m750cl.
518 (md_assemble): Handle two delimiters in succession (eg. `),').
519 * doc/c-ppc.texi (PowerPC-Opts): Document -m750cl.
520 * testsuite/gas/ppc/ppc.exp: Run ppc70ps dump tests.
521 * testsuite/gas/ppc/ppc750ps.s: New file.
522 * testsuite/gas/ppc/ppc750ps.d: Likewise.
524 2007-08-23 Ben Elliston <bje@au.ibm.com>
526 * doc/c-arm.texi (ARM Directives): Move brackets out of @vars.
528 2007-08-17 Alan Modra <amodra@bigpond.net.au>
531 * config/tc-i386.c (x86_cons): Complain about invalid @got etc.
533 (i386_immediate): Detect and complain about more cases of
534 invalid immediate expressions. Return failure rather than
535 converting them to zero.
536 (i386_displacement): Likewise.
538 2007-08-17 Alan Modra <amodra@bigpond.net.au>
540 * po/Make-in: Add --msgid-bugs-address to xgettext invocation.
542 2007-08-14 Andreas Schwab <schwab@suse.de>
544 * config/tc-ia64.c (tc_gen_reloc): Return NULL if relocation is
547 2007-08-12 Matthias Klose <doko@ubuntu.com>
549 * doc/Makefile.am (AM_MAKEINFOFLAGS, TEXI2DVI): Include
550 $(top_srcdir)/../../bfd/doc.
551 * doc/Makefile.in: Regenerate.
553 2007-08-10 Nick Clifton <nickc@redhat.com>
555 * NEWS: Add a marker for the 2.18 features.
557 2007-08-09 Paul Brook <paul@codesourcery.com>
559 * config/tc-arm.c (relaxed_symbol_addr): Compensate for alignment.
561 2007-08-09 H.J. Lu <hongjiu.lu@intel.com>
563 * config/tc-i386.c (check_byte_reg): Support pextrb and pinsrb.
565 2007-07-29 H.J. Lu <hongjiu.lu@intel.com>
567 * config/tc-i386.c (check_long_reg): Allow cvtss2si to convert
568 DWORD memory to Reg64 in Intel synax.
569 (check_qword_reg): Allow cvtsd2si to convert QWORD memory to
570 Reg32 in Intel syntax.
572 2007-07-25 Sterling Augustine <sterling@tensilica.com>
574 * config/tc-xtensa.c (xtensa_extui_opcode): New.
575 (xg_expand_assembly_insn): Check for invalid extui operands.
576 (md_begin): Initialize xtensa_extui_opcode.
578 2007-07-24 Nick Clifton <nickc@redhat.com>
580 * config/tc-mep.h (skip_whitespace): Remove definition.
582 2007-07-23 H.J. Lu <hongjiu.lu@intel.com>
584 * config/tc-i386.c (cpu_arch): Change i386 to PROCESSOR_I386.
587 (f32_patt): Remove f32_15.
588 (f16_patt): Likewise.
589 (i386_align_code): Updated to alt_long_patt for 64bit by
592 * config/tc-i386.h (processor_type): Add PROCESSOR_I386.
594 2007-07-23 Evandro Menezes <evandro.menezes@amd.com>
596 * config/tc-i386.c (i386_align_code): Enable alignment up to
597 MAX_MEM_FOR_RS_ALIGN_CODE bytes. Remove special treatment
600 * config/tc-i386.h (MAX_MEM_FOR_RS_ALIGN_CODE): Changed to 31.
602 2007-07-20 Nick Clifton <nickc@redhat.com>
604 * app.c (do_scrub_chars): Provide a one character buffer to hold a
605 pushed back newline at the end of an unterminated quoted string.
607 2007-07-14 Nick Clifton <nickc@redhat.com>
609 * config/tc-arm.c (create_register_alias): Return a boolean rather
611 Check the return value of insert_reg_alias and do not continue to
612 create aliases once an insertion has failed.
613 (s_unreq): Delete the all-upper-case and all-lower-case
614 alternatives as well.
616 2007-07-12 Kai Tietz <kai.tietz@onevision.com>
618 * symbols.c: Print bfd_hostptr_t to file via fprintf_vma.
621 2007-07-11 Daniel Jacobowitz <dan@codesourcery.com>
623 * config/tc-mips.c (mips_dwarf2_format, mips_dwarf2_addr_size): Use
626 2007-07-04 Richard Sandiford <richard@codesourcery.com>
628 * config/tc-mips.c (mips_cpu_info_table): Add new entries for
629 {24k,24ke,34k,74k}f{2_1,1_1,x}. Also add an entry for 74kf3_2.
630 Deprecate *x and *fx.
631 * doc/c-mips.texi: Document the new CPU arguments. Deprecate
634 2007-07-04 H.J. Lu <hongjiu.lu@intel.com>
636 * config/obj-coff.h (x86_64_target_format): Renamed to ...
637 (i386_target_format): This
638 (TARGET_FORMAT): Use i386_target_format.
640 * config/tc-i386.c (x86_64_target_format): Removed.
641 (i386_target_format): Handle PE formats.
643 2007-07-04 Nick Clifton <nickc@redhat.com>
645 * symbols.c (symbol_relc_make_value): Use bfd_sprintf_vma in order
646 to get the right length of printed value.
648 2007-07-03 Nick Clifton <nickc@redhat.com>
650 * COPYING: Replace with GPLv3 text.
651 * app.c: Update copyright notice to refer to GPLv3.
652 * as.c, as.h, asintl.h, atof_generic.c, bignum.h, bit_fix.h,
653 cgen.c, cond.c, debug.c, depend.c, dw2gencfi.c, dw2gencfi.h,
654 dwarf2dbg.c, dwarf2dbg.h, ecoff.c, ecoff.h, ehopt.c, emul.h,
655 emul_target.h, expr.c, expr.h, flonum-copy.c, flonum.h,
656 flonum-konst.c, frags.c, frags.h, hash.c, hash.h, input-file.c,
657 input-file.h, input-scrub.c, ibtl-lex.h, itbl-lex.l, itbl-ops.c,
658 itbl-ops.h, itbl-parse.y, listing.c, listing.h, literal.c,
659 macro.c, messages.c, obj.h, output-file.c, output-file.h, read.c,
660 read.h, sb.c, sb,h, stabs.c, struc-symbol.h, subsegs.c, subsegs.h,
661 symbols.c, symbols.h, tc.h, write.c, write.h, config/aout_gnu.h,
662 config/config/atof-ieee.c, config/atof-vax.c, config/bfin-aux.h,
663 config/bfin-defs.h, config/bfin-lex.l, config/bfin-parse.y,
664 config/itbl-mips.h, config/m68k-parse.h, config/m68k-parse.y,
665 config/obj-aout.c, config/obj-aout.h, config/obj-coff.c,
666 config/obj-coff.h, config/obj-ecoff.c, config/obj-ecoff.h,
667 config/obj-elf.c, config/obj-elf.h, config/obj-evax.c,
668 config/obj-evax.h, config/obj-multi.h, config/obj-som.c,
669 config/obj-som.h, config/tc-alpha.c, config/tc-alpha.h,
670 config/tc-arc.c, config/tc-arc.h, config/tc-arm.c,
671 config/tc-arm.h, config/tc-avr.c, config/tc-avr.h,
672 config/tc-bfin.c, config/tc-bfin.h, config/tc-cr16.c,
673 config/tc-cr16.h, config/tc-cris.c, config/tc-cris.h,
674 config/tc-crx.c, config/tc-crx.h, config/tc-d10v.c,
675 config/tc-d10v.h, config/tc-d30v.c, config/tc-d30v.h,
676 config/tc-dlx.c, config/tc-dlx.h, config/tc-fr30.c,
677 config/tc-fr30.h, config/tc-frv.c, config/tc-frv.h,
678 config/tc-generic.c, config/tc-generic.h, config/tc-h8300.c,
679 config/tc-h8300.h, config/tc-hppa.c, config/tc-hppa.h,
680 config/tc-i370.c, config/tc-i370.h, config/tc-i386.c,
681 config/tc-i386.h, config/tc-i860.c, config/tc-i860.h,
682 config/tc-i960.c, config/tc-i960.h, config/tc-ia64.c,
683 config/tc-ia64.h, config/tc-ip2k.c, config/tc-ip2k.h,
684 config/tc-iq2000.c, config/tc-iq2000.h, config/tc-m32c.c,
685 config/tc-m32c.h, config/tc-m32r.c, config/tc-m32r.h,
686 config/tc-m68hc11.c, config/tc-m68hc11.h, config/tc-m68k.c,
687 config/tc-m68k.h, config/tc-maxq.c, config/tc-maxq.h,
688 config/tc-mcore.c, config/tc-mcore.h, config/tc-mep.c,
689 config/tc-mep.h, config/tc-mips.c, config/tc-mips.h,
690 config/tc-mmix.c, config/tc-mmix.h, config/tc-mn10200.c,
691 config/tc-mn10200.h, config/tc-mn10300.c, config/tc-mn10300.h,
692 config/tc-msp430.c, config/tc-msp430.h, config/tc-mt.c,
693 config/tc-mt.h, config/tc-ns32k.c, config/tc-ms32k.h,
694 config/tc-openrisc.c, config/tc-openrisc.h, config/tc-or32.c,
695 config/tc-or32.h, config/tc-pdp11.c, config/tc-pdp11.h,
696 config/tc-pj.c, config/tc-pj.h, config/tc-ppc.c, config/tc-ppc.h,
697 config/tc-s390.c, config/tc-s390.h, config/tc-score.c,
698 config/tc-score.h, config/tc-sh64.c, config/tc-sh64.h,
699 config/tc-sh.c, config/tc-sh.h, config/tc-sparc.c,
700 config/tc-sparc.h, config/tc-spu.c, config/tc-spu.h,
701 config/tc-tic30.c, config/tc-tic30.h, config/tc-tic4x.c,
702 config/tc-tic4x.h, config/tc-tic54x.c, config/tc-tic54x.h,
703 config/tc-v850.c, config/tc-v850.h, config/tc-vax.c,
704 config/tc-vax.h, config/tc-xc16x.c, config/tc-x16x.h,
705 config/tc-xstormy16.c, config/tc-xstormy16.h, config/tc-xtensa.c,
706 config/tc-xtensa.h, config/tc-z80.c, config/tc-z80.h,
707 config/tc-z8k.c, config/tc-z8k.h, config/te-386bsd.h,
708 config/te-freebsd.h, config/te-hppa.h, config/te-irix.h,
709 config/te-netware.h, config/te-sparcaout.h, config/te-tmips.h,
710 config/te-vxworks.h, config/vax-inst.h, config/xtensa-istack.h,
711 config/xtensa-relax.c, config/xtensa-relax.h: Likewise.
713 * flonum-mult.c: Likewise, and also correct typo referring to
714 non-existant GNU Assembler General Public License.
715 * config/tc-m68851.h: Likewise.
716 * NEWS: Mention the new license. Also note where the 2.17 release
718 * config/e-crisaout.c: Add copyright header.
719 * config/e-criself.c, config/e-i386aout.c, config/e-i386coff.c,
720 config/e-i386elf.c, config/e-mipscoff.c, config/e-mipself.c,
721 config/obj-multi.c, config/te-aix5.h, config/te-armeabi.h,
722 config/te-armlinuxeabi.h, config/te-dynix.h, config/te-epoc-pe.h,
723 config/te-generic.h, config/te-gnu.h, config/te-go32.h,
724 config/te-hppa64.h, config/te-hppalinux64.h, config/te-hpux.h,
725 config/te-i386aix.h, config/te-ia64aix.h, config/te-interix.h,
726 config/te-linux.h, config/te-lnews.h, config/te-lynx.h,
727 config/te-mach.h, config/te-macos.h, config/te-nbsd532.h,
728 config/te-nbsd.h, config/te-pc532mach.h, config/te-pe.h,
729 config/te-pep.h, config/te-psos.h, config/te-riscix.h,
730 config/te-sun3.h, config/te-svr4.h, config/te-symbian.h,
731 config/te-wince-pe.h: Likewise.
733 2007-07-03 Nathan Sidwell <nathan@codesourcery.com>
735 * config/tc-m68k.c (m68k_ip): Add j & K operand types.
736 (install_operand): Add E encoding.
737 (md_begin): Check and skip initial '.' arg character.
738 (get_num): Add 0..511 case.
740 2007-07-03 Alan Modra <amodra@bigpond.net.au>
743 * config/obj-elf.c (elf_ecoff_set_ext): Make static when OBJ_MAYBE_ELF.
744 * config/obj-elf.h (obj_ecoff_set_ext): Comment.
746 2007-07-03 Mikkel Lauritsen <renard@nospam.dk>
749 * app.c (do_scrub_chars <state 5>): Check for output buffer full
752 2007-07-02 Joseph Myers <joseph@codesourcery.com>
754 * config/tc-mips.c (s_dtprelword, s_dtpreldword,
755 s_dtprel_internal): New.
756 (mips_pseudo_table): Add .dtprelword and .dtpreldword.
757 (md_apply_fix): Handle BFD_RELOC_MIPS_TLS_DTPREL32 and
758 BFD_RELOC_MIPS_TLS_DTPREL64.
760 2007-07-02 Alan Modra <amodra@bigpond.net.au>
762 * Makefile.am: Run "make dep-am".
763 * Makefile.in: Regenerate.
764 * aclocal.m4: Regenerate.
765 * config.in: Regenerate.
766 * doc/Makefile.in: Regenerate.
767 * po/POTFILES.in: Regenerate.
768 * po/gas.pot: Regenerate.
770 2007-07-02 Alan Modra <amodra@bigpond.net.au>
772 * config/tc-ppc.c (ppc_pe_section): Comment out code assigning
773 coff section flag values to bfd section flag.
775 2007-06-30 H.J. Lu <hongjiu.lu@intel.com>
777 * aclocal.m4: Regenerated.
778 * doc/Makefile.in: Likewise.
779 * Makefile.in: Likewise.
781 2007-06-29 Joseph Myers <joseph@codesourcery.com>
783 * as.c (main): Only call create_obj_attrs_section if IS_ELF.
785 2007-06-29 Joseph Myers <joseph@codesourcery.com>
787 * as.c (create_obj_attrs_section): New.
788 (main): Call create_obj_attrs_section for ELF.
789 * read.c (s_gnu_attribute, skip_whitespace, skip_past_char,
790 skip_past_comma, s_vendor_attribute): New.
791 (potable): Add gnu_attribute for ELF.
792 * read.h (s_vendor_attribute): Declare.
793 * config/tc-arm.c (s_arm_eabi_attribute): Replace by wrapper
794 round s_vendor_attribute.
795 (aeabi_set_public_attributes): Update for new attributes
797 (arm_md_end): Remove attributes contents setting now done
800 2007-06-29 M R Swami Reddy <MR.Swami.Redd@nsc.com>
802 * Makefile.am: Add CR16 related entry.
803 * Makefile.in: Regenerate.
804 * config/tc-cr16.h: New file
805 * config/tc-cr16.c: New file
806 * doc/c-cr16.texi: New file for cr16
807 * doc/all.texi: Entry for cr16
808 * doc/Makefile.am: Added c-cr16.texi
809 * doc/Makefile.in: Regenerate
810 * doc/as.texinfo: Entry for CR16 target
811 * NEWS: Announce the support for the new target.
813 2007-06-26 Paul Brook <paul@codesourcery.com>
815 * config/tc-arm.c (parse_operands): Accept generic coprocessor regs
817 (reg_names): Add fpinst, pfinst2, mvfr0 and mvfr1.
819 2007-06-25 H.J. Lu <hongjiu.lu@intel.com>
821 * config/tc-i386.c (process_operands): Replace regKludge
824 2007-06-25 Richard Sandiford <richard@codesourcery.com>
826 * config/tc-mips.h (TC_SYMFIELD_TYPE): New.
827 * config/tc-mips.c (append_insn): Record which symbols have
828 R_MIPS16_26 relocations against them.
829 (mips_fix_adjustable): Don't reduce relocations against such symbols.
831 2007-06-22 Sterling Augustine <sterling@tensilica.com>
833 * config/tc-xtensa.c (xg_assembly_relax): Comment termination rules.
834 (frag_format_size): Handle RELAX_IMMED_STEP3.
835 (xtensa_relax_frag, md_convert_frag): Likewise.
836 * config/tc-xtensa.h (xtensa_relax_statesE): Add RELAX_IMMED_STEP3.
837 (RELAX_IMMED_MAXSTEPS): Adjust.
838 * config/xtensa-relax.c (widen_spec_list): Add transitions from
839 wide branches to branch-over-jumps.
840 (build_transition): Handle wide branches in transition patterns.
842 2007-06-22 H.J. Lu <hongjiu.lu@intel.com>
844 * config/tc-i386.c (disp_size): New.
845 (imm_size): Likewise.
846 (output_disp): Use disp_size and imm_size.
847 (output_imm): Use imm_size.
849 2007-06-19 Sterling Augustine <sterling@tensilica.com>
851 * config/tc-xtensa.h (struct xtensa_frag_type): Update comment about
852 use of literal_frag field.
853 * config/tc-xtensa.c (xtensa_mark_literal_pool_location): Record frag
854 in the literal_frag field.
855 (xtensa_move_literals): Use it here instead of searching. Update
856 literal_frag field with new value.
858 2007-06-14 Paul Brook <paul@codesourcery.com>
860 * config/tc-arm.c (do_t_mov_cmp): Handle shift by register and
861 narrow shift by immediate.
863 2007-06-14 H.J. Lu <hongjiu.lu@intel.com>
865 * Makefile.am (ACLOCAL_AMFLAGS): Add -I ../config -I ../bfd.
867 * acinclude.m4: Don't include m4 files.
868 (BFD_BINARY_FOPEN): Removed.
869 Remove libtool kludge.
871 * Makefile.in: Regenerated.
872 * doc/Makefile.in: Likewise.
873 * aclocal.m4: Likewise.
874 * configure: Likewise.
876 2007-06-11 Sterling Augustine <sterling@tensilica.com>
877 Bob Wilson <bob.wilson@acm.org>
879 * config/tc-xtensa.c (XTENSA_PROP_INSN_NO_TRANSFORM): Renamed to...
880 (XTENSA_PROP_NO_TRANSFORM): ...this.
881 (frag_flags_struct): Move is_no_transform out of the insn sub-struct.
882 (xtensa_mark_frags_for_org): New.
883 (xtensa_handle_align): Set RELAX_ORG frag subtype for rs_org.
884 (xtensa_post_relax_hook): Call xtensa_mark_frags_for_org.
885 (get_frag_property_flags): Adjust reference to is_no_transform flag.
886 (xtensa_frag_flags_combinable): Likewise.
887 (frag_flags_to_number): Likewise. Use XTENSA_PROP_NO_TRANSFORM.
888 * config/tc-xtensa.h (xtensa_relax_statesE): Add RELAX_ORG.
890 2007-06-06 Paul Brook <paul@codesourcery.com>
892 * config/tc-arm.c (s_align): Pad code sections appropriately.
894 2007-06-05 Paul Brook <paul@codesourcery.com>
896 * config/tc-arm.c (insns): Correct Thumb-2 ldrd/strd opcodes.
898 2007-06-05 Nick Clifton <nickc@redhat.com>
901 * config/tc-sparc.c (sparc_ip): Terminate tls_ops array.
903 2007-06-05 Alan Modra <amodra@bigpond.net.au>
905 * config/tc-spu.c (spu_cons): Use deferred_expression. Handle
907 (tc_gen_reloc): Abort if neither addsy or subsy is set.
908 (md_apply_fix): Don't attempt to resolve SPU_PPU relocs.
909 * config/tc-spu.h (md_operand): Handle @ppu without sym.
911 2007-05-31 Paul Brook <paul@codesourcery.com>
913 * config/tc-arm.c (insns): Allow strex on M profile cores.
915 2007-05-29 David S. Miller <davem@davemloft.net>
916 Jakub Jelinek <jakub@redhat.com>
919 * config/tc-sparc.c (md_apply_fix): Fix relocation overflow checks
920 for BFD_RELOC_SPARC_WDISP16 and BFD_RELOC_SPARC_WDISP19.
922 2007-05-29 Alan Modra <amodra@bigpond.net.au>
924 * config/tc-spu.h: Wrap in #ifndef/#endif. Delete coff macros.
926 2007-05-29 Alan Modra <amodra@bigpond.net.au>
928 * config/tc-ppc.c: Convert to ISO C.
929 * config/tc-ppc.c: Likewise.
931 2007-05-29 Alan Modra <amodra@bigpond.net.au>
933 * write.h (EXEC_MACHINE_TYPE): Delete.
934 (string_byte_count, section_alignment): Delete.
936 2007-05-28 Nathan Sidwell <nathan@codesourcery.com>
938 * app.c (do_scrub_chars): Cope with \ at end of buffer.
940 2007-05-26 Alan Modra <amodra@bigpond.net.au>
942 * config/tc-ppc.c (ppc_insert_operand): Truncate sign bits in
943 top 32 bits of 64 bit value if so doing results in passing
944 range check. Rewrite sign extension fudges similarly. Enable
945 fudges for powerpc64 too. Report user value if range check
946 fails rather than fudged value. Negate PPC_OPERAND_NEGATIVE
947 range rather than value, also to report user value on failure.
949 2007-03-25 Paul Brook <paul@codesourcery.com>
951 * config/tc-arm.c (T2_SUBS_PC_LR): Define.
952 (do_t_add_sub): Correctly encode subs pc, lr, #const.
953 (do_t_mov_cmp): Correctly encode movs pc, lr.
955 2007-05-24 Steve Ellcey <sje@cup.hp.com>
957 * Makefile.in: Regnerate.
958 * configure: Regenerate.
959 * aclocal.m4: Regenerate.
960 * doc/Makefile.in: Regenerate.
962 2007-05-22 Bob Wilson <bob.wilson@acm.org>
964 * doc/c-xtensa.texi (Xtensa Automatic Alignment): Remove statements
965 and index entries about automatic alignment of ENTRY instructions.
967 2007-05-22 Nick Clifton <nickc@redhat.com>
969 * doc/as.texinfo: Use @copying around the copyright notice.
971 2007-05-18 Joseph Myers <joseph@codesourcery.com>
973 * config/tc-mips.c (s_mipsset): Use generic s_set for directives
976 2007-05-17 H.J. Lu <hongjiu.lu@intel.com>
979 2003-06-05 Michal Ludvig <mludvig@suse.cz>
980 * doc/as.texinfo: Document new directives: .cfi_restore,
981 .cfi_undefined, .cfi_same_value, .cfi_return_column,
982 .cfi_remember_state and .cfi_restore_state.
984 2007-05-17 Nathan Sidwell <nathan@codesourcery.com>
986 * config/tc-m68k.c (md_apply_fix): Show value of out of range
987 fixups in error message.
988 (md_conver_frag_1): Propagate the fix source location and use
989 as_bad_where rather than fatal, for better error messages.
991 2007-05-16 Paul Brook <paul@codesourcery.com>
993 * config/tc-arm.c (v7m_psrs): Add uppercase PSR names and xpsr.
995 2007-05-15 Mark Shinwell <shinwell@codesourcery.com>
997 * app.c (do_scrub_chars): Don't damage \@ pseudo-variables.
999 2007-05-15 Vincent Riviere <vincent.riviere@freesbee.fr>
1002 * config/tc-m68k.c (relaxable_symbol): Make sure that the correct
1003 addend is stored for relocs against weak symbols.
1004 (md_apply_fix): So not loose track of addend for relocs against
1007 2007-05-14 Thiemo Seufer <ths@mips.com>
1009 * config/tc-mips.c (md_parse_option): Fix parsing of -O option.
1011 2007-05-14 Mei Ligang <ligang@sunnorth.com.cn>
1013 * config/tc-score.c (data_op2, validate_immediate): Fix bug for
1014 addri, addri.c, subi, and subi.c when immediate number is hex.
1015 (score_insns): Remove subis and subis.c.
1016 (do_sub_rdi16): Delete.
1018 2007-05-11 Alan Modra <amodra@bigpond.net.au>
1020 * config/tc-spu.c (md_pseudo_table): Add int, long, quad. Call
1022 (md_assemble): Tidy use of insn.flag.
1023 (get_imm): Likewise. Handle uppercase input too.
1024 (spu_cons): New function.
1025 * config/tc-spu.h (tc_fix_adjustable): Don't adjust SPU_PPU relocs.
1026 (TC_FORCE_RELOCATION): Don't resolve them either.
1028 2007-05-05 Mark Shinwell <shinwell@codesourcery.com>
1030 * config/tc-arm.c (md_apply_fix): Generate more accurate
1031 diagnostic when 8-bit immediate range is exceeded for
1032 BFD_RELOC_ARM_OFFSET_IMM8.
1034 2007-05-04 Alan Modra <amodra@bigpond.net.au>
1037 * config/tc-i386.c (lex_got): Don't replace the reloc token with
1038 a space if we already have a space.
1040 2007-05-03 H.J. Lu <hongjiu.lu@intel.com>
1042 * config/tc-i386.c (match_template): Don't explicitly check
1043 suffix for crc32 in Intel mode.
1044 (process_suffix): Issue an error for crc32 if the operand size
1047 2007-05-03 Vincent Riviere <vincent.riviere@freesbee.fr>
1048 Nick Clifton <nickc@redhat.com>
1051 * config/tc-m68k.c (relaxable_symbol): Do not relax weak symbols.
1052 (tc_gen_reloc): Adjust the addend of relocs against weak symbols.
1053 (md_apply_fix): Put zero values into the frags referencing weak
1056 2007-05-02 Alan Modra <amodra@bigpond.net.au>
1059 * config/tc-ppc.c (ppc_insert_operand): Don't increase min for
1062 2007-05-01 H.J. Lu <hongjiu.lu@intel.com>
1064 * config/tc-i386.c (match_template): Check suffix for crc32 in
1066 (process_suffix): Default the suffix of 8bit crc32 to
1068 (check_byte_reg): Skip check for 8bit crc32.
1070 2007-04-30 H.J. Lu <hongjiu.lu@intel.com>
1072 * config/tc-i386.c (md_assemble): Use register_prefix in
1073 error/warning message.
1074 (check_byte_reg): Likewise.
1075 (check_long_reg): Likewise.
1076 (check_qword_reg): Likewise.
1077 (check_word_reg): Likewise.
1078 (process_operands): Likewise.
1080 2007-04-30 Alan Modra <amodra@bigpond.net.au>
1083 * config/tc-ppc.c (ppc_insert_operand): Disable range check if
1086 2007-04-28 Thiemo Seufer <ths@networkno.de>
1088 * config/tc-mips.c: Fix comment.
1090 2007-04-26 Anatoly Sokolov <aesok@post.ru>
1092 * config/tc-avr.c (mcu_types): Add support for atmega8hva and
1093 atmega16hva devices. Move at90usb82 device to 'avr5' architecture.
1094 * doc/c-avr.texi: Document new devices.
1096 2007-04-24 Alan Modra <amodra@bigpond.net.au>
1098 * Makefile.am: Run "make dep-am".
1099 * Makefile.in: Regenerate.
1101 2007-04-23 Nathan Sidwell <nathan@codesourcery.com>
1103 * config/tc-m68k.c (mcf54455_ctrl): New.
1104 (HAVE_LONG_DISP, HAVE_LONG_CALL, HAVE_LONG_COND): New.
1105 (m68k_archs): Add isac.
1106 (m68k_cpus): Add 54455 family.
1107 (m68k_ip): Split Bg into Bb, Bs, Bg.
1108 (m68k_elf_final_processing): Add ISA_C.
1109 * doc/c-m68k.texi (M680x0 Options): Add isac.
1111 2007-04-22 Alan Modra <amodra@bigpond.net.au>
1113 * read.c (read_a_source_file): Skip multiple spaces to
1114 cover hack in mmix md_start_line_hook which overwrites a
1115 colon with a space. Delete sermon and needless assertion.
1117 2007-04-21 Alan Modra <amodra@bigpond.net.au>
1119 * config/atof-vax.c (atof_vax_sizeof): Change return type to unsigned.
1120 (md_atof): Make number_of_chars unsigned. Revert last change.
1121 * config/tc-or32.c (md_apply_fix): Delete bogus assertions.
1122 * config/tc-sh.c (sh_optimize_expr): Only define for OBJ_ELF.
1123 * config/tc-sh.h (md_optimize_expr): Likewise.
1124 * config/tc-sh64.c (shmedia_md_pcrel_from_section): Delete bogus
1126 * config/tc-xtensa.c (convert_frag_immed_finish_loop): Likewise.
1128 2007-04-21 Nick Clifton <nickc@redhat.com>
1130 * config/atof-vax.c (md_atof): Fix comparison inside know().
1132 * config/tc-ia64.c (emit_one_bundle): Fix typo.
1134 2007-04-21 Alan Modra <amodra@bigpond.net.au>
1136 * expr.c (expr): Assert on rankarg, not rank which can be unsigned.
1137 * read.c (read_a_source_file): Remove buffer_limit[-1] assertion.
1138 Don't skip over NUL char.
1139 (pseudo_set): Set X_op for registers to O_register.
1140 * symbols.c (symbol_clone): Remove assertion that sym is defined.
1141 (resolve_symbol_value): Resolve O_register symbols.
1142 * config/tc-i386.c (parse_real_register): Don't use i386_float_regtab.
1143 Instead find st(0) by hash lookup.
1144 * config/tc-ppc.c (ppc_macro): Warning fix.
1146 * as.h (ENABLE_CHECKING): Default define to 0.
1147 (know): Assert if ENABLE_CHECKING.
1148 (struct relax_type): Remove superfluous declaration.
1149 * configure.in (--enable-checking): New.
1150 * configure: Regenerate.
1151 * config.in: Regenerate.
1152 * config/tc-ppc.c (ppc_setup_opcodes): Do checks when ENABLE_CHECKING.
1153 Check for duplicate powerpc_operands entries.
1155 2007-04-20 Nathan Sidwell <nathan@codesourcery.com>
1157 * config/tc-m68k.c (mcf5253_ctrl): New.
1158 (mcf52223_ctrl): New.
1159 (m68k_cpus): Add 5253, 52221, 52223.
1161 * config/m68k-parse.h (RAMBAR_ALT): New.
1162 * config/tc-m68k.c (mcf5206_ctrl, mcf5307_ctrl): New.
1163 (mcf_ctrl, mcf5208_ctrl, mcf5210a_ctrl, mcf5213_ctrl, mcf52235_ctrl,
1164 mcf5225_ctrl, mcf5235_ctrl, mcf5271_ctrl, mcf5275_ctrl,
1165 mcf5282_ctrl, mcf5329_ctrl, mcf5373_ctrl, mcfv4e_ctrl,
1166 mcf5475_ctrl, mcf5485_ctrl): Add RAMBAR synonym for
1168 (mcf5272_ctrl): Add RAMBAR0, replace add RAMBAR with RAMBAR_ALT.
1169 (m68k_cpus): Adjust 5206, 5206e & 5307 entries.
1170 (m68k_ip) <Case J>: Detect when RAMBAR_ALT should be used. Add it
1171 to control register mapping.
1173 2007-04-20 Alan Modra <amodra@bigpond.net.au>
1175 * messages.c (as_internal_value_out_of_range): Fix typo in
1176 error message. Return after printing domain error.
1177 * config/tc-ppc.c (ppc_insert_operand): Preserve low zero bits
1178 in max when shifting right.
1180 2007-04-20 Alan Modra <amodra@bigpond.net.au>
1182 * messages.c (as_internal_value_out_of_range): Extend to report
1183 errors for values with invalid low bits set.
1184 * config/tc-ppc.c (ppc_setup_opcodes): Check powerpc_operands bitm
1185 fields. Check that operands and opcode fields are disjoint.
1186 (ppc_insert_operand): Check operands using mask rather than bit
1187 count. Check low bits too. Handle PPC_OPERAND_PLUS1. Adjust
1189 (md_apply_fix): Adjust for struct powerpc_operand change.
1191 2007-04-19 Paul Brook <paul@codesourcery.com>
1193 * config/tc-arm.c (md_assemble): Only allow 16-bit instructions on
1194 Thumb-1. Add sanity check for bogus relaxations.
1196 2007-04-19 Paul Brook <paul@codesourcery.com>
1198 * config/tc-arm.c (insns): Allow rsb and rsbs on Thumb-1.
1200 2007-04-19 Alan Modra <amodra@bigpond.net.au>
1202 * Makefile.am: Run "make dep-am".
1203 * Makefile.in: Regenerate.
1205 2007-04-19 Nathan Froyd <froydnj@codesourcery.com>
1207 * doc/c-ppc.texi (PowerPC-Opts): Document -me500, -me500x2, -mspe.
1209 2007-04-18 H.J. Lu <hongjiu.lu@intel.com>
1211 * doc/c-i386.texi; Document .ssse3, .sse4.1, .sse4.2 and .sse4.
1213 2007-04-18 H.J. Lu <hongjiu.lu@intel.com>
1215 * config/tc-i386.c (cpu_arch): Add .sse4.2 and .sse4.
1216 (match_template): Handle operand size for crc32 in SSE4.2.
1217 (process_suffix): Handle operand type for crc32 in SSE4.2.
1218 (output_insn): Support SSE4.2.
1220 2007-04-18 H.J. Lu <hongjiu.lu@intel.com>
1222 * config/tc-i386.c (cpu_arch): Add .sse4.1.
1223 (process_operands): Adjust implicit operand for blendvpd,
1224 blendvps and pblendvb in SSE4.1.
1225 (output_insn): Support SSE4.1.
1227 2007-04-18 Paul Brook <paul@codesourcery.com>
1229 * config/tc-arm.c (do_t_rsb): Use 16-bit encoding when possible.
1231 2007-04-16 Kaz Kojima <kkojima@rr.iij4u.or.jp>
1233 * config/tc-sh.c (sh_handle_align): Call as_bad_where instead
1234 of as_warn_where for misaligned data.
1236 2007-04-15 Kaz Kojima <kkojima@rr.iij4u.or.jp>
1238 * config/tc-sh.c (align_test_frag_offset_fixed_p): Handle
1241 2007-04-14 Steve Ellcey <sje@cup.hp.com>
1243 * Makefile.am: Add ACLOCAL_AMFLAGS.
1244 * Makefile.in: Regenerate.
1246 2007-04-14 Kaz Kojima <kkojima@rr.iij4u.or.jp>
1248 * config/tc-sh.c (align_test_frag_offset_fixed_p): New.
1249 (sh_optimize_expr): Likewise.
1250 * config/tc-sh.h (md_optimize_expr): Define.
1251 (sh_optimize_expr): Prototype.
1253 2007-04-06 Matt Thomas <matt@netbsd.org>
1255 * config/tc-vax.c (vax_cons): Added to support %pcrel{8,16,32}(exp)
1256 to emit pcrel relocations by DWARF2 in non-code sections. Borrowed
1257 heavily from tc-sparc.c. (vax_cons_fix_new): Likewise.
1259 2007-04-04 Kazu Hirata <kazu@codesourcery.com>
1261 * config/tc-m68k.c (HAVE_LONG_BRANCH): Add fido_a.
1263 2007-04-04 Paul Brook <paul@codesourcery.com>
1265 * config/tc-arm.c (do_neon_ext): Enforce immediate range.
1266 (insns): Use I15 for vext.
1268 2007-04-04 Paul Brook <paul@codesourcery.com>
1270 * configure.tgt: Loosen checks for arm uclinux eabi targets.
1272 2007-04-02 Sterling Augustine <sterling@tensilica.com>
1274 * config/tc-xtensa.c (xtensa_flush_pending_output): Check
1275 outputting_stabs_line_debug.
1277 2007-03-26 Anatoly Sokolov <aesok@post.ru>
1279 * config/tc-avr.c (mcu_types): Add support for at90pwm1, at90usb82,
1280 at90usb162, atmega325p, atmega329p, atmega3250p and atmega3290p
1282 * doc/c-avr.texi: Document new devices.
1284 2007-04-02 Richard Sandiford <richard@codesourcery.com>
1286 * doc/as.texinfo: Add -mvxworks-pic to the list of MIPS options.
1287 * doc/c-mips.texi (-KPIC, -mvxworks-pic): Document.
1288 * config/tc-mips.c (md_show_usage): Mention -mvxworks-pic.
1290 2007-03-30 Sterling Augustine <sterling@tensilica.com>
1291 Bob Wilson <bob.wilson@acm.org>
1293 * config/tc-xtensa.c (xtensa_move_labels): Remove loops_ok argument.
1294 Do not check is_loop_target flag.
1295 (xtensa_frob_label): Adjust calls to xtensa_move_labels.
1296 (xg_assemble_vliw_tokens): Likewise. Also avoid calling
1297 xtensa_move_labels for alignment of loop opcodes.
1299 2007-03-30 H.J. Lu <hongjiu.lu@intel.com>
1301 * config/tc-i386.c (process_suffix): Reindent a bit.
1303 2007-03-30 Paul Brook <paul@codesourcery.com>
1305 * config/tc-arm.c (encode_thumb2_ldmstm): New function.
1306 (do_t_ldmstm): Generate 16-bit push/pop. Use encode_thumb2_ldmstm.
1307 (do_t_push_pop): Use encode_thumb2_ldmstm.
1309 2007-03-29 DJ Delorie <dj@redhat.com>
1311 * config/tc-m32c.c (rl_for, relaxable): Protect argument.
1312 (md_relax_table): Add entries for ADJNZ macros.
1313 (M32C_Macros): Add ADJNZ macros.
1314 (subtype_mappings): Add entries for ADJNZ macros.
1315 (insn_to_subtype): Check for adjnz and sbjnz insns.
1316 (md_estimate_size_before_relax): Pass insn to insn_to_subtype.
1317 (md_convert_frag): Convert adjnz and sbjnz.
1319 2007-03-29 Nick Clifton <nickc@redhat.com>
1321 * itbl-ops.c (itbl_entry): Remove unnecessary and excessively long
1323 * itbl-ops.h (enum e_processor): Initialise the e_nprocs field
1324 using ITBL_NUMBER_OF_PROCESSORS.
1325 * itbl-parse.y (yyerror): Remove use of redundant macro PARAMS.
1327 2007-03-28 H.J. Lu <hongjiu.lu@intel.com>
1329 * config/tc-i386.c (build_modrm_byte): For instructions with 2
1330 register operands, encode destination in i.rm.regmem if its
1333 2007-03-28 Richard Sandiford <richard@codesourcery.com>
1334 Phil Edwards <phil@codesourcery.com>
1336 * doc/as.texinfo: Put the contents after the title page rather
1337 than at the end of the document.
1339 2007-03-27 Alan Modra <amodra@bigpond.net.au>
1341 * NEWS: Mention ".reloc".
1343 2007-03-26 Sterling Augustine <sterling@tensilica.com>
1345 * config/tc-xtensa.c (xg_translate_idioms): Allow assembly idioms
1346 in FLIX instructions.
1348 2007-03-26 Julian Brown <julian@codesourcery.com>
1350 * config/tc-arm.c (arm_it): Add immisfloat field.
1351 (parse_qfloat_immediate): Disallow integer syntax for floating-point
1352 immediates. Fix hex immediates, handle 0.0 and -0.0 specially.
1353 (parse_neon_mov): Set immisfloat bit for operand if it parsed as a
1355 (neon_cmode_for_move_imm): Reject non-float immediates for float
1357 (neon_move_immediate): Pass immisfloat bit to neon_cmode_for_move_imm.
1359 2007-03-26 Julian Brown <julian@codesourcery.com>
1361 * doc/c-arm.texi: Add documentation for .dn/.qn directives.
1363 2007-03-26 Alan Modra <amodra@bigpond.net.au>
1365 * doc/as.texinfo (Reloc): Document.
1366 * read.c (potable): Add "reloc".
1367 (s_reloc): New function.
1368 * write.c (reloc_list): New global var.
1369 (resolve_reloc_expr_symbols): New function.
1370 (write_object_file): Call it.
1371 (write_relocs): Process reloc_list.
1372 * write.h (struct reloc_list): New.
1373 (reloc_list): Declare.
1375 2007-03-24 Paul Brook <paul@codesourcery.com>
1377 * config/tc-arm.c (do_t_ldmstm): Error on Thumb-2 addressing modes.
1379 2007-03-24 Paul Brook <paul@codesourcery.com>
1380 Mark Shinwell <shinwell@codesourcery.com>
1382 * config/tc-arm.c (operand_parse_code): Add OP_oRRw.
1383 (parse_operands): Don't expect comma if first operand missing.
1385 (do_srs): Encode register number, checking it is r13. Update comment.
1386 (insns): Update SRS entries to take a register.
1388 2007-03-23 H.J. Lu <hongjiu.lu@intel.com>
1390 * config/tc-i386.c (md_begin): Allow '.' in mnemonic.
1392 2007-03-23 Mark Shinwell <shinwell@codesourcery.com>
1394 * config/tc-arm.c (md_apply_fix): Turn CBZ instructions that
1395 attempt to jump to the next instruction into NOPs.
1397 2007-03-23 Alan Modra <amodra@bigpond.net.au>
1399 * config/tc-spu.c: Don't include opcode/spu.h.
1400 (md_assemble): Set tc_fix_data.insn_tag and arg_format.
1401 (md_apply_fix): Adjust.
1402 * config/tc-spu.h: Include opcode/spu.h.
1403 (struct tc_fix_info): New.
1404 (TC_FIX_TYPE, TC_INIT_FIX_DATA): Adjust.
1405 (TC_FORCE_RELOCATION): Define.
1407 2007-03-22 Joseph Myers <joseph@codesourcery.com>
1409 * doc/as.texinfo: Include VERSION_PACKAGE when reporting version.
1411 2007-03-21 H.J. Lu <hongjiu.lu@intel.com>
1413 * config/tc-i386.c (process_suffix): Check 0x90 instead of
1414 xchg for xchg %rax,%rax.
1416 2007-03-21 H.J. Lu <hongjiu.lu@intel.com>
1418 * config/tc-i386.c: Replace REX_MODE64, REX_EXTX, REX_EXTY
1419 and REX_EXTZ with REX_W, REX_R, REX_X and REX_B respectively.
1421 2007-03-21 H.J. Lu <hongjiu.lu@intel.com>
1424 * config/tc-i386.c (match_template): Properly handle 64bit mode
1427 2007-03-21 Anton Ertl <anton@mips.complang.tuw>
1430 * config/tc-alpha.c (emit_ustX): Fix ustq code generation.
1432 2007-03-21 H.J. Lu <hongjiu.lu@intel.com>
1434 * Makefile.am: Run dep-am.
1435 * Makefile.in: Regenerated.
1437 * config/tc-i386.c: Don't include "opcodes/i386-opc.h".
1439 * config/tc-i386.h: Include "opcodes/i386-opc.h".
1440 (NOP_OPCODE): Removed.
1441 (template): Likewise.
1443 2007-03-21 Andreas Schwab <schwab@suse.de>
1445 * config/tc-i386.h (NOP_OPCODE): Restore.
1447 2007-03-18 Mark Shinwell <shinwell@codesourcery.com>
1449 * config/tc-arm.c (do_mul): Don't warn about overlapping
1450 Rd and Rm operands when assembling for v6 or above.
1451 Correctly capitalize register names in the messages.
1452 (do_mlas): Likewise. Delete spurious blank line.
1454 2007-03-16 Kazu Hirata <kazu@codesourcery.com>
1456 * config/tc-m68k.c (m68k_cpus): Add an entry for fidoa.
1458 2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
1460 * config/tc-i386.c (md_begin): Use i386_regtab_size to scan
1462 (parse_register): Use i386_regtab_size instead of ARRAY_SIZE
1465 2007-03-15 Alexandre Oliva <aoliva@redhat.com>
1468 * app.c (do_scrub_chars): PUT after setting states.
1470 2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
1472 * Makefile.am: Run "make dep-am".
1473 * Makefile.in: Regenerated.
1475 * config/tc-i386.c: Include "opcodes/i386-opc.h" instead of
1477 (md_begin): Check reg_name != NULL for the last entry in
1480 * config/tc-i386.h: Move many entries to opcode/i386.h and
1483 * configure.in (need_opcodes): Set true for i386.
1484 * configure: Regenerated.
1486 2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
1488 * Makefile.am (REPORT_BUGS_TO): Removed.
1489 (INCLUDES): Remove -DREPORT_BUGS_TO.
1490 * Makefile.in: Regenerated.
1492 * configure.in (--with-bugurl): Removed.
1493 * configure: Regenerated.
1495 * doc/Makefile.am (as_TEXINFOS): Remove gasver.texi.
1496 (AM_MAKEINFOFLAGS): Add -I ../../bfd/doc.
1497 (TEXI2DVI): Likewise.
1498 (gasver.texi): Removed.
1499 (MOSTLYCLEANFILES): Remove gasver.texi.
1500 (as.1): Don't depend on gasver.texi.
1501 * doc/Makefile.in: Regenerated.
1503 * doc/as.texi: Include bfdver.texi instead of gasver.texi.
1505 2007-03-14 Daniel Jacobowitz <dan@codesourcery.com>
1507 * config/tc-arm.c (arm_copy_symbol_attributes): New.
1508 * config/tc-arm.h (arm_copy_symbol_attributes): Declare.
1509 (TC_COPY_SYMBOL_ATTRIBUTES): Define.
1510 * gas/symbols.c (copy_symbol_attributes): Use
1511 TC_COPY_SYMBOL_ATTRIBUTES.
1513 2007-03-14 Paul Brook <paul@codesourcery.com>
1515 * config/tc-arm.c (T16_32_TAB): Fix dec_sp encoding.
1517 2007-03-14 Alan Modra <amodra@bigpond.net.au>
1520 * write.c (relax_segment): Insert extra alignment padding
1521 to break infinite relax loop when given impossible
1522 gcc_except_table assembly.
1524 2007-03-12 H.J. Lu <hongjiu.lu@intel.com>
1526 * config/tc-i386.c (md_assemble): Use Opcode_XXX instead of XXX
1527 on i.tm.base_opcode.
1528 (match_template): Likewise.
1529 (process_operands): Use ~0x3 mask to match MOV_AX_DISP32.
1531 * config/tc-i386.h (Opcode_D): New.
1532 (Opcode_FloatR): Likewise.
1533 (Opcode_FloatD): Likewise.
1536 (FloatMF): Likewise.
1540 2007-03-09 Alexandre Oliva <aoliva@redhat.com>
1542 * app.c (do_scrub_chars): Recognize comments after # line "file".
1543 * read.c (get_linefile_number): New.
1544 (s_app_line): Accept ill-formed .linefile lines as comments.
1546 2007-03-09 Alan Modra <amodra@bigpond.net.au>
1548 * config/tc-i386.h (WORKING_DOT_WORD): Define.
1550 2007-03-09 Alexandre Oliva <aoliva@redhat.com>
1552 * app.c (do_scrub_chars): Turn #<line>"file"flags into .linefile.
1553 * as.h (new_logical_line_flags): New.
1554 * input-scrub.c (new_logical_line): Turned into wrapper for...
1555 (new_logical_line_flags): this. Handle flags.
1556 * read.c (potable): Add linefile. Adjust appline argument.
1557 (s_app_file): Fake .appfiles no more.
1558 (s_app_line): For .linefile, accept file name and flags.
1560 2007-03-08 Alan Modra <amodra@bigpond.net.au>
1562 * symbols.c (symbol_relc_make_sym): Comment typo fixes.
1564 2007-03-08 Alan Modra <amodra@bigpond.net.au>
1566 * Makefile.am: Run "make dep-am".
1567 * Makefile.in: Regenerate.
1568 * po/POTFILES.in: Regenerate.
1570 2007-03-07 Joseph Myers <joseph@codesourcery.com>
1572 * configure.in (REPORT_BUGS_TEXI): Define to Texinfo version of
1574 * doc/Makefile.am (gasver.texi): Define BUGURL.
1575 * doc/as.texinfo: Use BUGURL.
1576 * Makefile.in, configure, doc/Makefile.in: Regenerate.
1578 2007-03-06 Andreas Krebbel <krebbel1@de.ibm.com>
1580 * config/tc-s390.c (md_parse_option): z9-ec option added.
1582 2007-03-02 Paul Brook <paul@codesourcery.com>
1584 * config/tc-arm.c (relax_immediate): Always return positive values.
1585 (relaxed_symbol_addr): New function.
1586 (relax_adr, relax_branch): Use it.
1587 (arm_relax_frag): Pass strect argument. Adjust infinite loop check.
1589 2007-03-01 Joseph Myers <joseph@codesourcery.com>
1591 * as.c (parse_args): Update copyright date.
1593 2007-02-28 Nathan Sidwell <nathan@codesourcery.com>
1595 * configure.tgt (sh-*-uclinux, sh[12]-*-uclinux): Specify as elf.
1597 2007-02-28 Nick Clifton <nickc@redhat.com>
1600 * config/tc-d10v.c (do_assemble): Do not generate error messages,
1601 just return -1 whenever a problem is encountered.
1602 (md_assemble): If do_assemble returns -1 generate a non-fatal
1603 error message and return.
1606 * config/tc-msp430.c (line_separator_char): Change to '{'.
1608 2007-02-27 Alan Modra <amodra@bigpond.net.au>
1610 * config/tc-m68hc11.c (fixup24): Correct fixup size.
1611 (build_jump_insn): Likewise.
1612 (build_insn): Likewise.
1613 (s_m68hc11_relax): Likewise.
1615 2007-02-27 Alan Modra <amodra@bigpond.net.au>
1617 * config/obj-elf.c (elf_frob_file): frag_wane any new frags.
1619 2007-02-25 Mark Shinwell <shinwell@codesourcery.com>
1621 * config/tc-arm.c (do_vfp_nsyn_pop): Use fldmias/fldmiad.
1623 2007-02-23 Alan Modra <amodra@bigpond.net.au>
1625 * config/tc-mn10300.c (md_convert_frag): Correct fixup size.
1626 (md_assemble): Likewise.
1628 2007-02-22 Alan Modra <amodra@bigpond.net.au>
1630 * write.c (size_seg): Always clear SEC_RELOC here.
1631 (install_reloc): New function, extracted from..
1632 (write_relocs): ..here. Combine RELOC_EXPANSION_POSSIBLE code
1633 with !RELOC_EXPANSION_POSSIBLE code. Don't add fr_offset when
1634 testing frag size. Set SEC_RELOC here.
1636 2007-02-21 Alan Modra <amodra@bigpond.net.au>
1639 * config/tc-avr.h (TC_FX_SIZE_SLACK): Define.
1641 2007-02-20 Thiemo Seufer <ths@mips.com>
1643 * doc/c-mips.texi: Document 74kc, 74kf, 74kx.
1645 2007-02-20 Thiemo Seufer <ths@mips.com>
1647 * config/tc-mips.c (mips_cpu_info_table): Add 74K configurations.
1649 2007-02-20 Thiemo Seufer <ths@mips.com>
1650 Chao-Ying Fu <fu@mips.com>
1652 * config/tc-mips.c (mips_set_options, mips_opts, file_ase_dspr2,
1653 ISA_SUPPORTS_DSPR2_ASE, MIPS_CPU_ASE_DSPR2): Add DSP R2 ASE support.
1654 (macro_build): Add case '2'.
1655 (macro): Expand M_BALIGN to nop, packrl.ph or balign.
1656 (validate_mips_insn): Add support for balign instruction.
1657 (mips_ip): Handle DSP R2 instructions. Support balign instruction.
1658 (OPTION_DSPR2, OPTION_NO_DSPR2, OPTION_COMPAT_ARCH_BASE,
1659 md_parse_option, mips_after_parse_args): Add -mdspr2 and -mno-dspr2
1660 command line options.
1661 (s_mipsset): Add support for .set dspr2 and .set nodspr2 directives.
1662 (md_show_usage): Add -mdspr2 and -mno-dspr2 help output.
1663 * doc/c-mips.texi, doc/as.texinfo: Document -mdspr2, -mno-dspr2,
1664 .set dspr2, .set nodspr2.
1666 2007-02-20 Nathan Sidwell <nathan@codesourcery.com>
1668 * config/tc-m68k.c (mcf5210a_ctrl, mcf52235_ctrl, mcf5225_ctrl): New.
1669 (m68k_cpus): Add 5210a..5211a, 52230..52235 5224..5225.
1671 2007-02-18 Alan Modra <amodra@bigpond.net.au>
1673 * write.c (TC_FX_SIZE_SLACK): Define.
1674 (write_relocs): Reinstate check for fixup within frag.
1675 * config/tc-bfin.h (TC_FX_SIZE_SLACK): Define.
1676 * config/tc-h8300.h (TC_FX_SIZE_SLACK): Define.
1677 * config/tc-mmix.h (TC_FX_SIZE_SLACK): Define.
1678 * config/tc-sh.h (TC_FX_SIZE_SLACK): Define.
1679 * config/tc-xstormy16.h (TC_FX_SIZE_SLACK): Define.
1681 2007-02-17 Mark Mitchell <mark@codesourcery.com>
1682 Nathan Sidwell <nathan@codesourcery.com>
1683 Vladimir Prus <vladimir@codesourcery.com
1684 Joseph Myers <joseph@codesourcery.com>
1686 * configure.in (--with-bugurl): New option.
1687 * configure: Regenerate.
1688 * dep-in.sed: Remove bin-bugs.h.
1689 * Makefile.am (REPORT_BUGS_TO): Define.
1690 (INCLUDES): Define REPORT_BUGS_TO.
1691 (DEP_INCLUDES): Likewise.
1692 ($(OBJS)): No longer depend on bin-bugs.h.
1693 * Makefile.in: Regenerate.
1694 * doc/Makefile.in: Regenerate.
1695 * as.c (show_usage): Don't print empty REPORT_BUGS_TO.
1696 * as.h: Remove include of bin-bugs.h.
1698 2007-02-17 Alan Modra <amodra@bigpond.net.au>
1700 * write.c: White space fixes.
1701 (fixup_segment): Move symbol_mri_common_p adjustments..
1702 (write_relocs): ..and symbol_equated_reloc_p adjustments..
1703 (adjust_reloc_syms): ..to here.
1705 2007-02-16 Alan Modra <amodra@bigpond.net.au>
1707 * subsegs.c (subseg_change, subseg_get): Use xcalloc rather than
1708 xmalloc, memset. Don't bother assigning NULL to known zero mem.
1709 (subseg_set_rest): Remove unnecessary cast.
1710 * write.c: Include libbfd.h. Replace PTR with void * throughout.
1711 Remove unnecessary forward declarations and casts.
1712 (set_symtab): Delete extern bfd_alloc.
1713 (fixup_segment): Move.
1715 2007-02-15 Nathan Sidwell <nathan@codesourcery.com>
1717 * config/m68k-parse.h (m68k_register): Add ROMBAR0, ASID.
1718 * config/tc-m68k.c (mcfv4e_ctrl): Add ColdFire specific names.
1719 (mcf5475_ctrl, mcf5485_ctrl): New.
1720 (m68k_cpus): Use mcf5485_ctrl and mcf5485_ctrl for those families.
1721 (m68k_ip): Add ASID, MMUBAR, ROMBAR0 handling.
1722 (init_table): Add asid, mmubar, adjust rombar0.
1724 2007-02-14 Alan Modra <amodra@bigpond.net.au>
1726 * config/tc-i386.h (Seg2ShortForm, Seg3ShortForm): Delete.
1727 * config/tc-i386.c: Wrap overly long lines, whitespace fixes.
1728 (process_operands): Move old Seg2ShortForm and Seg3ShortForm
1729 code, and test for these insns using a combination of
1730 opcode_modifier and operand_types.
1732 2007-02-07 Paul Brook <paul@codesourcery.com>
1734 * configure.tgt: Add arm*-*-uclinux-*eabi.
1736 2007-02-05 Dave Brolley <brolley@redhat.com>
1737 Richard Sandiford <rsandifo@redhat.com>
1738 DJ Delorie <dj@redhat.com>
1739 Stan Cox <scox@redhat.com>
1740 Jim Blandy <jimb@redhat.com>
1741 Nick Clifton <nickc@redhat.com>
1742 Jim Wilson <wilson@redhat.com>
1743 Frank Ch. Eigler <fche@redhat.com>
1744 Graydon Hoare <graydon@redhat.com>
1745 Ben Elliston <bje@redhat.com>
1746 John Healy <jhealy@redhat.com>
1747 Richard Henderson <rth@redhat.com>
1749 * Makefile.am (CPU_TYPES): Add mep.
1750 (TARGET_CPU_CFILES): Add tc-mep.c.
1751 (TARGET_CPU_HFILES): Add tc-mep.h.
1752 (DEPTC_mep_elf): New variable.
1753 (DEPTC_mep_coff): Likewise.
1754 (DEPOBJ_mep_coff, DEPOBJ_mep_elf, DEP_mep_coff, DEP_mep_elf): Likewise.
1755 * configure.in: Support mep.
1756 * configure.tgt: Likewise.
1757 * config/tc-mep.c: New file.
1758 * config/obj-elf.c: New file.
1759 * config/tc-mep.c: New file.
1760 * config/tc-mep.h: New file.
1761 * testsuite/gas/mep: New testsuite with content.
1762 * Makefile.in: Regenerate.
1763 * configure: Regenerate.
1765 2007-02-05 Dave Brolley <brolley@redhat.com>
1767 * cgen.c (gas_cgen_install_complex_reloc): Removed.
1768 (complex_reloc_installation_howto): Removed.
1770 2007-02-05 Dave Brolley <brolley@redhat.com>
1771 Graydon Hoare <graydon@redhat.com>
1772 DJ Delorie <dj@redhat.com>
1773 Catherine Moore <clm@redhat.com>
1774 Michael Chastain <chastain@redhat.com>
1775 Frank Ch. Eigler <fche@redhat.com>
1777 * symbols.c (use_complex_relocs_for): New, to decide
1778 when to use complex relocs. Add signed RELC support.
1779 (resolve_symbol_value): Call use_complex_relocs_for. Unconditionally
1780 encode expression symbols as mangled complex relocation symbols (when
1781 compiled with -DOBJ_COMPLEX_RELOC).
1782 (symbol_relc_make_sym,value,expr): New traversal/conversion routines.
1783 * cgen.c (gas_cgen_md_apply_fix3): Only set signed_p if RELC. Call
1784 encode_addend with new args. Modify to get start, length from
1785 ifield whenever it is set. Also change condition on which
1786 self-describing relocs are encoded. Add hook into
1787 gas_cgen_encode_addend.
1788 (queue_fixup_recursively): Add signed RELC support. Change from masked
1789 expr to trunc flag. Restore assignment of sub-field value to
1790 temporary in fixups array. Reflect changed meaning of last arg to
1791 queue_fixup_recursively.
1792 (fixup): Add cgen_maybe_multi_ifield member.
1793 (make_right_shifted_expr): New function.
1794 (queue_fixup): Change to recursive function that fragments
1795 fixups if operand has a multi-ifield.
1796 (gas_cgen_parse_operand): Add RELC code to wrap expressions in
1797 symbols, call weak_operand_overflow_check, and fragment call
1798 queue_fixup with operand fields.
1799 (gas_cgen_finish_insn) Modify to manage ifield pointer.
1800 (weak_operand_overflow_check): New function to try to select
1802 (gas_cgen_encode_addend): New function for relc.
1803 (gas_cgen_install_complex_reloc): Likewise.
1804 (gas_cgen_tc_gen_reloc): Add hook into gas_cgen_install_complex_reloc.
1805 * write.h (struct fix): Add msb_field_p to fx_cgen sub-struct. Add
1806 cgen_maybe_multi_ifield field to fx_cgen substructure.
1807 * cgen.h (GAS_CGEN_MAX_FIXUPS): Bump from 3 up to 32.
1808 * symbols.h (symbol_relc_make_sym,value,expr): New prototypes.
1810 2007-02-03 DJ Delorie <dj@delorie.com>
1812 * config/tc-m32c.c (m32c_cons_fix_new): New. Added to support 3
1814 * config/tc-m32c.h (TC_CONS_FIX_NEW): Define.
1815 (m32c_cons_fix_new): Prototype.
1817 2007-02-02 Bob Wilson <bob.wilson@acm.org>
1819 * config/tc-xtensa.c (xg_build_to_insn): Use tinsn_init.
1820 (xg_expand_assembly_insn, istack_push_space, istack_pop): Likewise.
1822 2007-02-02 Bob Wilson <bob.wilson@acm.org>
1824 * config/tc-xtensa.c (SUFFIX_MAP, suffix_relocs): New.
1825 (xtensa_elf_suffix): Use suffix_relocs instead of local mapping table.
1826 (map_suffix_reloc_to_operator): New.
1827 (map_operator_to_reloc): New.
1828 (expression_maybe_register): Fix incorrect test of return value from
1829 xtensa_elf_suffix. Rearrange to use map_suffix_reloc_to_operator.
1830 (xg_assemble_literal, convert_frag_immed): Use map_operator_to_reloc.
1832 2007-02-02 Bob Wilson <bob.wilson@acm.org>
1834 * config/xtensa-istack.h (struct tinsn_struct): Delete fixup field.
1835 (tinsn_get_tok): Delete prototype.
1836 * config/tc-xtensa.c (tinsn_get_tok): Delete.
1838 2007-02-02 Bob Wilson <bob.wilson@acm.org>
1840 * config/xtensa-relax.h (struct build_instr): Delete id field.
1841 * config/xtensa-relax.c (widen_spec_list): Remove zeros from LITERAL
1843 (append_literal_op, append_label_op): Remove litnum/labnum arguments;
1844 set op_data fields to zero.
1845 (parse_id_constant): Delete.
1846 (build_transition): Remove code to handle numbered literals and labels.
1848 2007-02-02 Bob Wilson <bob.wilson@acm.org>
1850 * config/xtensa-relax.c (build_transition): Remove code after as_fatal.
1851 (build_transition_table): Likewise.
1853 2007-02-01 Bob Wilson <bob.wilson@acm.org>
1855 * config/tc-xtensa.c (xg_add_opcode_fix, md_apply_fix): Delete use of
1857 * config/tc-xtensa.h (TC_FORCE_RELOCATION_LOCAL): Remove.
1859 2007-02-02 Alan Modra <amodra@bigpond.net.au>
1861 * write.h (struct fix <fx_pcrel_adjust, fx_size>): Move.
1862 (struct fix <fx_plt>): Rename to tcbit2.
1863 * write.c (fix_new_internal): Adjust.
1864 (TC_FORCE_RELOCATION_LOCAL): Don't test fx_plt.
1865 * config/tc-arm.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1866 * config/tc-cris.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1867 * config/tc-i386.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1868 * config/tc-i960.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1869 * config/tc-sh.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1870 * config/tc-sh64.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1871 * config/tc-sparc.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1872 * config/tc-msp430.c (msp430_force_relocation_local): Likewise.
1873 * config/tc-ia64.c (emit_one_bundle): Don't set fx_plt.
1874 * config/tc-ia64.h (TC_FORCE_RELOCATION_LOCAL): Don't test fx_plt.
1875 Instead, compare fx_r_type.
1876 * config/tc-xtensa.c (xg_add_opcode_fix, md_apply_fix): Use
1877 fx_tcbit in place of fx_plt.
1878 * config/tc-xtensa.h (TC_FORCE_RELOCATION_LOCAL): Define.
1879 * doc/internals.texi (TC_FORCE_RELOCATION_LOCAL): Remove reference
1882 2007-01-30 Nick Clifton <nickc@redhat.com>
1884 * as.c (main): Mark symbols created via the --defsym command line
1885 option as volatile so that they can be overridden later on by a
1886 .set directive. This maintains compatibility with the behaviour
1887 of earlier versions of the assembler.
1888 * doc/as.texinfo (--defsym): Document that the defined symbol's
1889 value can be overridden via a .set directive.
1891 2007-01-28 H.J. Lu <hongjiu.lu@intel.com>
1893 * config/tc-i386.c (swap_imm_operands): Renamed to ...
1894 (swap_2_operands): This. Take 2 ints.
1895 (md_assemble): Updated.
1896 (swap_operands): Call swap_2_operands to swap 2 operands.
1898 2007-01-24 DJ Delorie <dj@redhat.com>
1900 * config/tc-m32c.c (md_pseudo_table): Add .3byte.
1902 2007-01-22 Nick Clifton <nickc@redhat.com>
1905 * tc-score.c: Remove unnecessary uses of _().
1906 Make the err_msg[] a file level local array in order to save
1908 Remove unnecessary sprintf()s.
1910 2007-01-18 Mei Ligang <ligang@sunnorth.com.cn>
1913 * config/tc-score.c : Using _() for const string.
1914 Do not assign inst.error with a local string pointer.
1915 (md_section_align): Pad section.
1917 2007-01-13 H.J. Lu <hongjiu.lu@intel.com>
1919 * config/tc-i386.c (build_modrm_byte): Check number of operands
1920 when procssing memory/register operand.
1922 2007-01-12 Nick Clifton <nickc@redhat.com>
1925 * macro.c (expand_irp): Do not ignore spaces inside quoted
1928 2007-01-12 Alan Modra <amodra@bigpond.net.au>
1930 * config/tc-spu.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
1931 * config/tc-m32r.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
1932 * config/tc-mn10300.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
1933 (TC_FORCE_RELOCATION): Define.
1934 (TC_FORCE_RELOCATION_LOCAL): Define.
1935 * config/tc-mn10300.c (mn10300_fix_adjustable): Adjust.
1937 2007-01-12 Alan Modra <amodra@bigpond.net.au>
1939 * input-file.c (input_file_open): Check fgets return.
1941 2007-01-11 Paul Brook <paul@codesourcery.com>
1943 * config/tc-arm.c (do_t_add_sub): Use Rd and Rs.
1945 2007-01-11 Nick Clifton <nickc@redhat.com>
1948 * config/tc-arm.c (md_begin): Cope with an NULL mcpu_fpu_opt
1951 * config/tc-mcore.c (md_number_to_chars): Use
1952 number_to_chars_{big|little}endian.
1954 2007-01-08 Kazu Hirata <kazu@codesourcery.com>
1956 * config/tc-m68k.c (m68k_archs, m68k_cpus): Treat Fido as an
1957 architecture by itself.
1958 (m68k_ip): Don't issue a warning for tbl instructions on fido.
1959 (m68k_elf_final_processing): Treat Fido as an architecture by
1962 2007-01-08 Kai Tietz <kai.tietz@onevision.com>
1964 * configure.tgt: Renamed target x86_64-*-mingw64 to x86_64-*-mingw*
1966 2007-01-05 H.J. Lu <hongjiu.lu@intel.com>
1968 * config/tc-i386.c (set_intel_syntax): Update set_intel_syntax
1969 depending on allow_naked_reg.
1971 2007-01-04 Paul Brook <paul@codesourcery.com>
1973 * config/tc-arm.c (do_cpsi): Set mmod bit for 2 argument form.
1975 2007-01-04 H.J. Lu <hongjiu.lu@intel.com>
1978 * config/tc-i386.c (register_prefix): New.
1979 (set_intel_syntax): Set set_intel_syntax to "" if register
1980 prefix isn't needed.
1981 (check_byte_reg): Use register_prefix for error message.
1982 (check_long_reg): Likewise.
1983 (check_qword_reg): Likewise.
1984 (check_word_reg): Likewise.
1986 2007-01-04 Julian Brown <julian@codesourcery.com>
1988 * config/tc-arm.c (do_neon_shl_imm): Swap rN, rM.
1989 (do_neon_qshl_imm): Likewise.
1990 (do_neon_rshl): New function. Handle rounding variants of
1991 v{q}shl-by-register.
1992 (insns): Use do_neon_rshl for vrshl, vqrshl.
1994 2007-01-04 Paul Brook <paul@codesourcery.com>
1996 * config/tc-arm.c (NEON_ENC_TAB): Fix encoding of vclt, vcle, vaclt
1999 2007-01-03 H.J. Lu <hongjiu.lu@intel.com>
2001 * config/tc-i386.c (swap_operands): Remove branches.
2003 2007-01-03 H.J. Lu <hongjiu.lu@intel.com>
2005 * config/tc-i386.c: Update copyright year.
2006 * config/tc-i386.h: Likewise.
2008 2007-01-03 H.J. Lu <hongjiu.lu@intel.com>
2010 * config/tc-i386.c (smallest_imm_type): Return unsigned int
2013 2007-01-03 H.J. Lu <hongjiu.lu@intel.com>
2015 * config/tc-i386.c: Convert to ISO C90 formatting
2016 * config/tc-i386.h: Likewise.
2018 2007-01-03 David Daney <ddaney@avtrex.com>
2020 * config/tc-mips.c (md_show_usage): Clean up -mno-shared
2023 For older changes see ChangeLog-2006
2029 version-control: never