gas/ChangeLog

   1 2004-05-28  DJ Delorie  <dj@redhat.com>
   2
   3         * config/tc-mn10300.h (tc_fix_adjustable): Define.
   4         * config/tc-mn10300.c (mn10300_fix_adjustable): Don't adjust debug
   5         or non-merged symbols.
   6
   7 2004-05-28  H.J. Lu  <hongjiu.lu@intel.com>
   8
   9         * config/tc-ia64.c (remove_marked_resource): Save, clear and
  10         restore the old slot when inserting srlz.i/srlz.d.
  11
  12 2004-05-28  Andrew Stubbs <andrew.stubbs@superh.com>
  13
  14         * Makefile.am: Regenerate dependecies.
  15         * Makefile.in: Regenerate.
  16         * config/tc-sh.c (valid_arch): Make unsigned.
  17         (preset_target_arch): Likewise.
  18         (md_begin): Use new architecture flags system.
  19         (get_specific): Likewise.
  20         (assemble_ppi): Likewise.
  21         (md_assemble): Likewise. Also fix error check for bad opcodes.
  22         (md_parse_option): Likewise. Also generate -isa values according
  23         to the table in bfd/cpu-sh.c instead of just constants. Also
  24         allow <arch>-up ISA variants.
  25         (sh_elf_final_processing): Replace if-else chain with a call to
  26         sh_find_elf_flags().
  27         * testsuite/gas/sh/arch: New directory.
  28         * testsuite/gas/sh/arch/arch.exp: New test script.
  29         * testsuite/gas/sh/arch/arch_expected.txt: New file.
  30         * testsuite/gas/sh/arch/sh.s: New file.
  31         * testsuite/gas/sh/arch/sh2.s: New file.
  32         * testsuite/gas/sh/arch/sh-dsp.s: New file.
  33         * testsuite/gas/sh/arch/sh2e.s: New file.
  34         * testsuite/gas/sh/arch/sh3-nommu.s: New file.
  35         * testsuite/gas/sh/arch/sh3.s: New file.
  36         * testsuite/gas/sh/arch/sh3-dsp.s: New file.
  37         * testsuite/gas/sh/arch/sh3e.s: New file.
  38         * testsuite/gas/sh/arch/sh4-nommu-nofpu.s: New file.
  39         * testsuite/gas/sh/arch/sh4-nofpu.s: New file.
  40         * testsuite/gas/sh/arch/sh4.s: New file.
  41         * testsuite/gas/sh/arch/sh4a-nofpu.s: New file.
  42         * testsuite/gas/sh/arch/sh4al-dsp.s: New file.
  43         * testsuite/gas/sh/arch/sh4a.s: New file.
  44
  45 2004-05-28  Peter Barada <peter@the-baradas.com>
  46
  47         * config/gc-m68k.c(m68k_ip): Convert mode 5 addressing
  48         with zero offset into mode 2 addressing to save a word.
  49
  50 2004-05-27  H.J. Lu  <hongjiu.lu@intel.com>
  51
  52         * config/tc-ia64.c (ar_is_in_integer_unit): Removed.
  53         (ar_is_only_in_integer_unit): New.
  54         (ar_is_only_in_memory_unit): New.
  55         (generate_unwind_image): Silence gcc on 32bit host.
  56         (md_assemble): Use ar_is_only_in_integer_unit instead of
  57         ar_is_in_integer_unit. Check AR access.
  58
  59 2004-05-27  Peter Barada  <peter@the-baradas.com>
  60
  61         * config/tc-m68k.c (md_begin): Sort the opcode table into
  62         alphabetical order.
  63         (m68k_compare_opcode): New function to do the sorting.
  64
  65 2004-05-24  Peter Barada  <peter@the-baradas.com>
  66
  67         * config/m68k-parse.y(operand): Allow for MAC/EMAC mask
  68         addressing on MIT style operands.
  69         * config/m68k-parse.y(yylex): Allow '-&' for predecrement
  70         w/mask addressing.
  71         * config/tc-m68k.c(install_operand): Comment 'G' and 'H' type
  72         operands.
  73
  74 2004-05-23  Alan Modra  <amodra@bigpond.net.au>
  75
  76         * expr.c (operand, operator): Don't reject '++' and '--'.
  77
  78 2004-05-20  Richard Sandiford  <rsandifo@redhat.com>
  79
  80         * config/tc-mips.c (append_insn): Use ISA-encoded addresses in MIPS16
  81         dwarf tables.
  82
  83 2004-05-17  Adam Nemet  <anemet@lnxw.com>
  84
  85         * configure.in: Add ppc-*-lynxos*.  Update i386-*-lynxos* to ELF.
  86         * configure: Regenerate.
  87
  88 2004-05-13  Paul Brook  <paul@codesourcery.com>
  89
  90         * dw2gencfi.c (output_cie):  Handle dwarf3 format CIE entries.
  91
  92 2004-05-13  Joel Sherrill <joel@oarcorp.com>
  93
  94         * configure.in (or32-*-rtems*): Switch to elf.
  95         * configure: Regenerate.
  96
  97 2004-05-13  Nick Clifton  <nickc@redhat.com>
  98
  99         * po/fr.po: Updated French translation.
 100
 101 2004-05-11  Nick Clifton  <nickc@redhat.com>
 102
 103         * doc/as.texinfo (Section): Document G and T flags to .section
 104         directive.  Document the extra arguments that the G flag
 105         requires.  Document the #tls flag.
 106
 107 2004-05-11  H.J. Lu  <hongjiu.lu@intel.com>
 108
 109         * subsegs.c (section_symbol): Create a new section symbol if
 110         the existing one doesn't match.
 111         * symbols.c (symbol_set_bfdsym): Don't reset BFD section symbol.
 112
 113 2004-05-07  Richard Sandiford  <rsandifo@redhat.com>
 114
 115         * config/tc-mips.c (append_insn, mips_emit_delays): Extend -mfix-vr4120
 116         to cope with VR4181A errata MD(1) and MD(4).
 117
 118 2004-05-07  Brian Ford  <ford@vss.fsi.com>
 119
 120         * NEWS: Mention .secrel32 for pe[i]-i386.
 121
 122 2004-05-07  Alexandre Oliva  <aoliva@redhat.com>
 123
 124         * config/tc-frv.h (MAX_MEM_FOR_RS_ALIGN_CODE): New.
 125         (HANDLE_ALIGN): New.
 126
 127 2004-05-06  Daniel Jacobowitz  <dan@debian.org>
 128
 129         * Makefile.am (DIST_SUBDIRS): Define.
 130         * aclocal.m4: Regenerate with automake 1.8.4.
 131         * Makefile.in: Likewise.
 132         * doc/Makefile.in: Likewise.
 133
 134 2004-05-06  David Mosberger-Tang  <davidm@hpl.hp.com>
 135
 136         * config/tc-ia64.c (dot_serialize): Declare.
 137         (dot_serialize): New function.
 138         (md_pseudo_table): Add ".serialize.data" and
 139         ".serialize.instruction" directives.
 140
 141 2004-05-06  Nick Clifton  <nickc@redhat.com>
 142
 143         * messages (as_internal_value_out_of_range): Print a message about
 144         a value being out of range.  Be consistent about whether the
 145         values are printed in decimal or hexadecimal.
 146         (as_warn_value_out_of_range): Generate a warning message about an
 147         out of range value.
 148         (as_bad_value_out_of_range): Generate an error message about an
 149         out of range value.
 150         * as.h: Prototype the new functions.
 151         * config/tc-alpha.c (insert_operand): Use new function.
 152         * config/tc-arc.c (arc_insert_operand): Likewise.
 153         * config/tc-mn10200.c (mn10200_insert_operand): Likewise.
 154         * config/tc-mn10300.c (mn10300_insert_operand): Likewise.
 155         * config/tc-ppc.c (ppc_insert_operand): Likewise.
 156         * config/tc-s390.c (s390_insert_operand): Likewise.
 157         * config/tc-v850.c (v850_insert_operand): Likewise.
 158
 159 2004-05-05  Alexandre Oliva  <aoliva@redhat.com>
 160
 161         * configure.in: Set em=linux for frv-*-*linux*.
 162         * configure: Rebuilt.
 163         * config/tc-frv.h (TARGET_FORMAT): Use elf32-frvfdpic if...
 164         (frv_md_fdpic_enabled): New.
 165         * config/tc-frv.c (frv_md_fdpic_enabled): New.
 166         (DEFAULT_FDPIC): New.
 167         (frv_flags): Use DEFAULT_FDPIC.
 168         (frv_pic_flag): Likewise.
 169         (OPTION_NOPIC): New.
 170         (md_longopts): Add -mnopic.
 171         (md_parse_option): Handle it.
 172         (md_show_usage): Add -mfdpic and -mnopic.
 173
 174 2004-05-05  Peter Barada  <peter@the-baradas.com>
 175
 176         * config/tc-m68k.c: Add find_cf_chip to print list of valid
 177         chips for invalid coldfire instructions, rename selectors
 178         for ColdFire sub-variants, add 521x,5249,547x,548x and aliases,
 179         add current_chip to track which chip is referred to(including save/restore),
 180         use current_chip to select control registers, not current_arch.
 181         (md_show_usage): Add new chips.
 182         * doc/c-m68k.texi: Document new command line switches.
 183
 184 2004-05-05  Jakub Jelinek  <jakub@redhat.com>
 185
 186         * tc-s390.h (md_do_align, HANDLE_ALIGN): Remove.
 187         (NOP_OPCODE): Define.
 188         (s390_align_code): Remove prototype.
 189         * tc-s390.c (s390_align_code): Remove.
 190
 191 2004-05-04  H.J. Lu  <hongjiu.lu@intel.com>
 192
 193         * config/tc-ia64.c (make_unw_section_name): Removed.
 194         (start_unwind_section): New function.
 195         (generate_unwind_image): Take const segT instead of const
 196         char *.
 197         (dot_handlerdata): Adjusted.
 198         (dot_endp): Likewise.
 199
 200 2004-05-02  H.J. Lu  <hongjiu.lu@intel.com>
 201
 202         * config/obj-elf.c (obj_elf_change_section): Allow the
 203         ".note.GNU-stack" section has SHF_EXECINSTR.
 204
 205 2004-05-02  H.J. Lu  <hongjiu.lu@intel.com>
 206
 207         * config/obj-elf.c (get_section): Return bfd_boolean.
 208         (obj_elf_change_section): Call bfd_get_section_by_name_if
 209         instead of bfd_map_over_sections.
 210
 211 2004-04-30  H.J. Lu  <hongjiu.lu@intel.com>
 212
 213         * config/obj-elf.c (get_section): New function.
 214         (obj_elf_change_section): Support multiple sections with same
 215         name.
 216
 217 2004-04-30  Nick Clifton  <nickc@redhat.com>
 218
 219         * config/tc-arm.c (create_register_alias): Fix typo checking for
 220         case sensitive register aliases.
 221         (co_proc_number): Use error message string in all_reg_maps[]
 222         array.
 223         (cp_reg_required_here): Likewise.
 224         (fp_reg_required_here): Likewise.
 225
 226 2004-04-29  Brian Ford  <ford@vss.fsi.com>
 227
 228         * dwarf2dbg.c (dwarf2_finish): Add SEC_DEBUGGING to section flags.
 229
 230 2004-04-28  Chris Demetriou  <cgd@broadcom.com>
 231
 232         * config/tc-mips.c (HAVE_32BIT_ADDRESSES, append_insn, macro_build)
 233         (load_address, macro, mips_ip, md_parse_option)
 234         (mips_force_relocation, mips_validate_fix, md_apply_fix3)
 235         (s_change_sec, pic_need_relax, tc_gen_reloc): Remove all
 236         embedded-PIC handling, and update comments.
 237         (SWITCH_TABLE): Remove.
 238         * config/tc-mips.h (DIFF_EXPR_OK): Delete.
 239         (enum mips_pic_level): Remove EMBEDDED_PIC.
 240         (EXTERN_FORCE_RELOC): Remove embedded-PIC handling.
 241         (TC_FORCE_RELOCATION): Update comment.
 242         * ecoff.c (ecoff_build_lineno): Add comment about some code that
 243         might be safe to remove now that MIPS embedded-PIC is gone.
 244
 245 2004-04-28  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>
 246
 247         * config/obj-som.c (obj_som_init_stab_section): Add new arguments in
 248         call to obj_set_subsection_attributes.
 249         (obj_som_init_stab_section): Likewise.
 250         * config/tc-hppa.c (default_subspace_dict): Add comdat field.
 251         (pa_def_subspaces): Provide comdat default.
 252         (pa_subspace): Handle new "comdat" parameter.  Set SEC_LINK_ONCE and
 253         not SEC_IS_COMMON if section is comdat, common or dup_common.  Update
 254         calls to create_new_subspace and update_subspace to pass comdat flag.
 255         (create_new_subspace, update_subspace): Add new comdat argument.  Use
 256         it in calls to obj_set_subsection_attributes.
 257         * doc/c-hppa.texi (.subspa, .nsubspa): Document new comdat parameter
 258         and use of comdat, common and dup_comm parameters.
 259
 260 2004-04-26  H.J. Lu  <hongjiu.lu@intel.com>
 261
 262         * config/obj-elf.c (obj_elf_change_section): Check if the old
 263         group name is NULL before comparison.
 264
 265 2004-04-23  Chris Demetriou  <cgd@broadcom.com>
 266
 267         * config/tc-mips.h (mips_dwarf2_addr_size): Prototype.
 268
 269 2004-04-23  Thiemo Seufer  <seufer@csv.ica.uni-stuttgart.de>
 270
 271         * config/tc-mips.c (s_mipsset): Set default CPU type for .set mipsN.
 272
 273 2004-04-23  Chris Demetriou  <cgd@broadcom.com>
 274
 275         * config/tc-mips.c (md_longopts): Remove -membedded-pic option.
 276         (OPTION_MEMBEDDED_PIC): Remove.
 277         (OPTION_TRAP, OPTION_BREAK, OPTION_EB, OPTION_EL)
 278         (OPTION_FP32, OPTION_GP32, OPTION_CONSTRUCT_FLOATS)
 279         (OPTION_NO_CONSTRUCT_FLOATS, OPTIONS_FP64, OPTION_GP64)
 280         (OPTION_RELAX_BRANCH, OPTION_NO_RELAX_BRANCH)
 281         (OPTION_ELF_BASE): Renumber.
 282         (md_parse_option): Remove OPTION_MEMBEDDED_PIC handling.
 283         (md_show_usage): Remove mention of -membedded-pic.
 284         * doc/as.texinfo: Remove mention of -membedded-pic.
 285
 286 2004-04-23  Thiemo Seufer  <seufer@csv.ica.uni-stuttgart.de>
 287
 288         * config/tc-mips.h (USE_GLOBAL_POINTER_OPT): Remove.
 289         * config/tc-mips.c (RDATA_SECTION_NAME, mips_target_format): Remove
 290         a.out support.
 291         (md_begin, mips_ip, md_parse_option, s_change_sec, s_option,
 292         s_abicalls, nopic_need_relax, tc_gen_reloc): Remove uses of
 293         USE_GLOBAL_POINTER_OPT.
 294
 295 2004-04-22  Thiemo Seufer  <seufer@csv.ica.uni-stuttgart.de>
 296
 297         * config/tc-mips.c (macro): One more use of load_delay_nop.
 298
 299 2004-04-22  Atsushi Nemoto  <anemo@mba.ocn.ne.jp>
 300
 301         * config/tc-mips.c (load_delay_nop): New function.
 302         (load_address, macro): Use load_delay_nop() to build a nop
 303         which can be omitted with gpr_interlocks.
 304
 305 2004-04-22  Thiemo Seufer  <seufer@csv.ica.uni-stuttgart.de>
 306
 307         * config/tc-mips.c (hilo_interlocks, gpr_interlocks,
 308         cop_interlocks): Remove superfluous CPU entries.
 309
 310 2004-04-22  Paul Brook  <paul@codesourcery.com>
 311
 312         * config/tc-arm.c (mav_parse_offset): Value must be multiple of 4.
 313
 314 2004-04-22  Peter Barada <peter@the-baradas.com>
 315
 316         * NEWS: Added support for EMAC instructions and MAC/EMAC
 317         Motorola syntax.
 318         * config/m68k-parse.h: Add ACC[123], ACCEXT{01,23}, MAC/EMAC
 319         scale factor tokens, trailing_ampersand to mark mask addressing
 320         for MAC/EMAC instructions.
 321         * config/m68k-parse.y: Add options_ampersand clause, '<<',
 322         '>>'.
 323         (yylex): Handle '>', '<', and '&' following '+'.
 324         * config/tc-m68k.c: Set mcfmac/mcfemac on appropriate ColdFire
 325         architectures in archs[].
 326         (m68k-ip): Add '4', 'e', 'g', 'i', cases to handle mask addressing
 327         for MAC/EMAC instructions, ACC[0123], ACCEXT{01,23}, and '<<'/'>>'
 328         respectively.
 329         (m68k_ip): Handle trailing '&' on MAC/EMAC insns.
 330         (install_operand): Fix 'n' case, Add 'F', 'f', 'G', 'H', 'I', ']'
 331         cases.
 332         Add EMAC operands to init_table[].
 333
 334 2004-04-22  Bruno De Bus <bdebus@elis.ugent.be>
 335
 336         * config/tc-arm.h (enum mstate): Move here, add MAP_UNDEFINED
 337         state.
 338         (TC_SEGMENT_INFO_TYPE): Define to enum mstate.
 339         * config/tc-arm.c (enum mstate): Delete from here.
 340         (mapping_state): Remove the static mapstate variable and instead
 341         store the state in the segment.  This allows a per-section mapping
 342         state.  Handle and ignore MAP_UNDEFINED states.
 343         (arm_elf_change_section): Get the current mapping state from the
 344         new section.
 345         (s_ltorg): Set the mapping state to MAP_DATA.
 346         (arm_cleanup): Use arm_elf_change_section to get the mapping state
 347         for each pool as it is emitted.
 348
 349 2004-04-22  Nick Clifton  <nickc@redhat.com>
 350
 351         * config/tc-arm.h: Formatting tidy ups.
 352
 353 2004-04-20  Chris Demetriou  <cgd@broadcom.com>
 354
 355         * NEWS: Note that MIPS -membedded-pic option is deprecated.
 356
 357 2004-04-20  DJ Delorie  <dj@redhat.com>
 358
 359         * config/tc-i386.h [TE_PE] (TC_CONS_FIX_NEW): Define.
 360         * config/tc-i386.c (md_pseudo_table) [TE_PE]: Add "secrel32".
 361         [TE_PE] (O_secrel): Define.
 362         [TE_PE] (x86_pe_cons_fix_new): New.
 363         [TE_PE] (pe_directive_secrel): Likewise.
 364         (tc_gen_reloc) [TE_PE]: Support BFD_RELOC_32_SECREL.
 365
 366 2004-04-19  Eric Christopher  <echristo@redhat.com>
 367
 368         * config/tc-mips.c (mips_dwarf2_addr_size): Revert part
 369         of previous patch for fix in gcc.
 370
 371 2004-04-19  Jakub Jelinek  <jakub@redhat.com>
 372
 373         * config/tc-xtensa.c (xg_assembler_literal): Fix a typo.
 374
 375 2004-04-19  Nathan Sidwell  <nathan@codesourcery.com>
 376
 377         * read.c (do_align): Call md_flush_pending_output, if defined.
 378
 379 2004-04-16  Alan Modra  <amodra@bigpond.net.au>
 380
 381         * expr.c (operand): Correct checks for ++ and --.
 382
 383 2004-04-14  H.J. Lu  <hongjiu.lu@intel.com>
 384
 385         * config/tc-generic.c: Add some comments.
 386
 387 2004-04-14  Richard Sandiford  <rsandifo@redhat.com>
 388
 389         * doc/c-mips.texi (-m{no-,}fix-vr4120): Renamed from
 390         -{no-}mfix-vr4122-bugs.
 391         * config/tc-mips.c (mips_fix_vr4120): Renamed from mips_fix_4122_bugs.
 392         (append_insn, mips_emit_delays): Update accordingly.
 393         (OPTION_FIX_VR4120, OPTION_NO_FIX_VR4120): Renamed from *VR4122.
 394         (md_longopts): Change -{no-,}mfix-vr4122-bugs to -m{no-,}fix-vr4120.
 395         (md_parse_option): Update after above changes.
 396         (md_show_usage): Add -mfix-vr4120.
 397
 398 2004-04-13  Bob Wilson  <bob.wilson@acm.org>
 399
 400         * doc/as.texinfo (Sub-Sections): Conditionalize COFF-specific use
 401         of .section directive; add a reference to the ELF .subsection
 402         directive.
 403
 404 2004-04-13  Kazuhiro Inaoka  <inaoka.kazuhiro@renesas.com>
 405
 406         * config/tc-m32r.c (md_assemble): Fixed infinite loop bug
 407         in parallel.
 408
 409 2004-04-11  Thiemo Seufer  <seufer@csv.ica.uni-stuttgart.de>
 410
 411         * Makefile.am: Remove mips from aout targets.
 412         * Makefile.in: Regenerate.
 413         * configure.in: Remove mips-dec-bsd* target.
 414         * configure: Regenerate.
 415
 416 2004-04-07  Alan Modra  <amodra@bigpond.net.au>
 417
 418         PR 96
 419         * config/tc-ppc.c (ppc_elf_suffix): Add valid32 and valid64 fields
 420         to struct map_bfd.  Adjust MAP macro, and define MAP32, MAP64.
 421         Update "mapping".  Restrict some @ modifiers to 32 bit.
 422
 423 2004-04-01  Asgari Jinia  <asgarij@kpitcummins.com>
 424             Dhananjay Deshpande <dhananjayd@kpitcummins.com>
 425
 426         * config/tc-sh.c (dont_adjust_reloc_32): New variable.
 427         (sh_fix_adjustable): Avoid adjusting BFD_RELOC_32 when
 428         dont_adjust_reloc_32 is set.
 429         (md_longopts): Add option -renesas.
 430         (md_parse_option, md_show_usage): Likewise.
 431         * doc/c-sh.texi: Likewise.
 432
 433 2004-04-01  Dave Korn  <dk@artimi.com>
 434
 435         * config/tc-dlx.c (md_assemble): set fx_no_overflow flag for
 436         hi16 and lo16 fixS structs.
 437         (md_assemble): generate bit_fixS for RELOC_DLX_LO16 in
 438         exactly the same way as for RELOC_DLX_REL16.
 439         (machine_ip): properly respect LO flag in the_insn and
 440         output RELOC_DLX_LO16 rather than RELOC_DLX_16.
 441         (md_apply_fix3): apply RELOC_DLX_LO16.
 442
 443 2004-03-30  Stan Shebs  <shebs@apple.com>
 444
 445         Remove long-obsolete MPW support.
 446         * mpw-config.in, mpw-make.sed, mac-as.r: Remove files.
 447         * configure.in: Remove mention of ppc-*-mpw* config.
 448         * configure.in: Likewise.
 449
 450 2004-03-30  Nick Clifton  <nickc@redhat.com>
 451
 452         * config/tc-arm.c (meabi_flags): Make its use conditional upon
 453         OBJ_ELF being defined.
 454
 455 2004-03-27  Alan Modra  <amodra@bigpond.net.au>
 456
 457         * config/obj-aout.c (obj_aout_type): Remove #ifdef BFD_ASSEMBLER code.
 458
 459 2004-03-23  Paul Brook  <paul@codesourcery.com>
 460
 461         * config/tc-arm.c (meabi_flags): New variable.
 462         (arm_parse_eabi): New function.
 463         (md_begin): Set flags for EABI v3.
 464         (arm_eabis): Add.
 465         (arm_long_opts): Add meabi.
 466         * doc/as.texinf <ARM>: Document -meabi.
 467         * doc/c-arm.texi: Ditto.
 468
 469 2004-03-22  Bob Wilson  <bob.wilson@acm.org>
 470
 471         * config/tc-xtensa.c (xtensa_post_relax_hook): Create literal
 472         tables even when use_literal_section flag is not set.
 473
 474 2004-03-22  Alan Modra  <amodra@bigpond.net.au>
 475
 476         * config/tc-sh.c: Remove trailing whitespace.
 477
 478 2004-03-22  Hans-Peter Nilsson  <hp@axis.com>
 479
 480         * doc/c-cris.texi (CRIS-Opts): Document --no-mul-bug-abort,
 481         --mul-bug-abort and the default behavior.
 482         * config/tc-cris.c (cris_insn_kind): New member CRIS_INSN_MUL.
 483         (err_for_dangerous_mul_placement): New variable.
 484         (STATE_MUL, OPTION_MULBUG_ABORT_ON, OPTION_MULBUG_ABORT_OFF): New
 485         macros.
 486         (md_cris_relax_table): Have placeholder for STATE_MUL.
 487         (md_longopts): New options --mul-bug-abort and --no-mul-bug-abort.
 488         (cris_relax_frag) <case ENCODE_RELAX (STATE_MUL, STATE_BYTE)>: New
 489         case doing nothing.
 490         (md_estimate_size_before_relax) <case ENCODE_RELAX (STATE_MUL,
 491         STATE_BYTE)>: Ditto.
 492         (md_convert_frag) <ENCODE_RELAX (STATE_MUL, STATE_BYTE)>: Check
 493         alignment and position of this frag, emit error message if
 494         suspicious.
 495         (md_assemble): For a multiply insn and when checking it,
 496         transform the current frag into a special frag for that purpose.
 497         (md_parse_option) <case OPTION_MULBUG_ABORT_OFF, case
 498         OPTION_MULBUG_ABORT_ON>: Handle new options.
 499
 500 2004-03-19  Bob Wilson  <bob.wilson@acm.org>
 501
 502         * config/tc-xtensa.c (mark_literal_frags): New function.
 503         (xtensa_move_literals): Call mark_literal_frags for all literal
 504         segments, including init and fini literal segments.
 505         (xtensa_post_relax_hook): Swap use of xt_insn_sec and xt_literal_sec.
 506
 507 2004-03-19  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>
 508
 509         * tc-hppa.c (cons_fix_new_hppa): Check for PC relative base type.
 510         (pa_comm): Set BSF_OBJECT in symbol flags.
 511
 512 2004-03-19  Alan Modra  <amodra@bigpond.net.au>
 513
 514         * Makefile.am: Run "make dep-am".
 515         * Makefile.in: Regenerate.
 516         * doc/Makefile.in: Regenerate.
 517         * config.in: Regenerate.
 518         * po/gas.pot: Regenerate.
 519
 520 2004-03-18  Nathan Sidwell  <nathan@codesourcery.com>
 521
 522         * read.c (read_a_source_file): Use demand_empty_rest_of_line.
 523         (demand_empty_rest_of_line): Issue an error here.
 524         (ignore_rest_of_line): Silently skip to end.
 525         (demand_copy_string): Issue an error, not warning.
 526         (equals): Likewise.
 527         * config/obj-elf.c (obj_elf_section_name): Likewise.
 528         (obj_elf_section): Likewise.
 529         * config/tc-arc.c (arc_extoper): Remove bogus NULL checks.
 530         (arc_extinst): Likewise.
 531         * config/tc-ia64.c (dot_saveb): Use demand_empty_rest_of_line.
 532         (dot_spill): Likewise.
 533         (dot_unwabi): Likewise.
 534         (dot_prologue): Likewise.
 535
 536         * expr.c (operand): Reject ++ and --.
 537         (operator): Likewise.
 538
 539 2004-03-17  Kaz Kojima  <kkojima@rr.iij4u.or.jp>
 540
 541         * config/tc-sh.c: Include dw2gencfi.h.
 542         (sh_cfi_frame_initial_instructions): New function.
 543         (sh_regname_to_dw2regnum): Likewise.
 544         * config/tc-sh.h (DWARF2_LINE_MIN_INSN_LENGTH): Move to the end of
 545         file.
 546         (TARGET_USE_CFIPOP): Define.
 547         (tc_cfi_frame_initial_instructions): Likewise.
 548         (tc_regname_to_dw2regnum): Likewise.
 549         (DWARF2_DEFAULT_RETURN_COLUMN, DWARF2_CIE_DATA_ALIGNMENT): Likewise.
 550         * Makefile.am: Update dependencies.
 551         * Makefile.in: Regenerate.
 552
 553 2004-03-17  Ralf Corsepius <corsepiu@faw.uni-ulm.de>
 554
 555         * configure.in: Switch sh-*-rtems* to ELF.  Add sh-*-rtemscoff*.
 556         * configure: Regenerate.
 557
 558 2004-03-12  Bob Wilson  <bob.wilson@acm.org>
 559
 560         * read.c (s_leb128): Call md_flush_pending_output.
 561
 562 2004-03-12  Michal Ludvig  <mludvig@suse.cz>
 563
 564         * config/tc-i386.c (output_insn): Handle PadLock instructions.
 565         * config/tc-i386.h (CpuPadLock): New define.
 566         (CpuUnknownFlags): Added CpuPadLock.
 567
 568 2004-03-07  Andreas Schwab  <schwab@suse.de>
 569
 570         * doc/c-hppa.texi (HPPA Directives): Fix typo.
 571
 572 2004-03-07  Richard Henderson  <rth@redhat.com>
 573
 574         * dw2gencfi.c (output_cie): Align length to 4 byte boundary.
 575         (cfi_finish): Likewise for fde.
 576
 577 2004-03-05  H.J. Lu  <hongjiu.lu@intel.com>
 578
 579         * config/tc-ia64.c (md_assemble): Properly handle NULL
 580         align_frag.
 581         (ia64_handle_align): Don't abort if failed to add a stop bit.
 582
 583 2004-03-04  H.J. Lu  <hongjiu.lu@intel.com>
 584
 585         * Makefile.in: Regenerated.
 586         * aclocal.m4: Likewise.
 587         * configure: Likewise.
 588         * doc/Makefile.in: Likewise.
 589
 590 2004-03-03  H.J. Lu  <hongjiu.lu@intel.com>
 591
 592         * config/tc-ia64.c (dot_align): New.
 593         (ia64_do_align): Make it static.
 594         (md_pseudo_table): Use "dot_align" for "align".
 595         (ia64_md_do_align): Don't set align_frag here.
 596         (ia64_handle_align): Add a stop bit to the previous bundle if
 597         needed.
 598
 599         * config/tc-ia64.h (ia64_do_align): Removed.
 600
 601 2003-03-03  Andrew Stubbs  <andrew.stubbs@superh.com>
 602
 603         * config/tc-sh.c (md_parse_option): Add -isa=sh4-nofpu and
 604         -isa=sh4-nommu-nofpu options. Adjust help messages accordingly.
 605         (sh_elf_final_processing): Output BFD type sh4_nofpu if that is
 606         the most general type or the user specifically requested it.
 607         (md_assemble): Add a new error message for when an instruction
 608         is understood, but is not allowed due to an -isa option.
 609
 610 2004-03-02  H.J. Lu  <hongjiu.lu@intel.com>
 611
 612         * config/tc-ia64.c (align_frag): New.
 613         (md_assemble): Set the tc_frag_data field in align_frag for
 614         IA64_OPCODE_FIRST instructions.
 615         (ia64_md_do_align): Set align_frag.
 616         (ia64_handle_align): Add a stop bit if needed.
 617
 618         * config/tc-ia64.h (TC_FRAG_TYPE): New.
 619         (TC_FRAG_INIT): New.
 620
 621 2004-03-01  Richard Sandiford  <rsandifo@redhat.com>
 622
 623         * config/tc-frv.c (fr400_audio): New variable.
 624         (md_parse_option, md_show_usage): Add -mcpu=fr405 and -mcpu=fr450.
 625         (md_parse_option): Set fr400_audio for -mcpu=fr400 and -mcpu=fr405.
 626         (target_implements_insn_p): New function.
 627         (md_assemble): Report an error if the processor doesn't implement
 628         the instruction.
 629
 630 2004-02-27  Kazuhiro Inaoka  <inaoka.kazuhiro@renesas.com>
 631
 632         * config/tc-m32r.c (md_longopts): Added -no-bitinst option.
 633         (md_parse_option): Ditto.
 634         (OPTION_NO_SPECIAL_M32R): Added.
 635         (md_show_usage): Document it.
 636         (enable_speial_m32r): Changed a default value from 0 to 1.
 637         * doc/c-m32r.texi: Document the -no-bitinst option.
 638
 639 2004-02-27  Nick Clifton  <nickc@redhat.com>
 640
 641         * config/tc-sh.c (get_operand): Revert previous delta.
 642         (tc_gen_reloc): Check for an unknown reloc type before processing
 643         the addend.
 644
 645 2004-02-27  Hannes Reinecke  <hare@suse.de>
 646
 647         * config/tc-s390.c (s390_insn): Correct range check for opcode in
 648         .insn pseudo operation.
 649
 650 2004-02-27  Anil Paranjpe  <anilp1@kpitcummins.com>
 651
 652         * config/tc-sh.c (get_operand):  In case of #Imm, check has been
 653         added for wrong syntax.
 654
 655 2004-02-26  Eric Christopher  <echristo@redhat.com>
 656
 657         * config/tc-mips.c (mips_dwarf2_addr_size): New.
 658         * config/tc-mips.h (DWARF2_ADDR_SIZE): Use.
 659
 660 2004-02-26  Andrew Stubbs <andrew.stubbs@superh.com>
 661
 662         * config/tc-sh.c (build_Mytes): Add REG_N_D and REG_N_B01
 663         nibble types to assembler.
 664
 665 2004-02-25  Fred Fish  <fnf@redhat.com>
 666
 667         * config/tc-iq2000.c: Add missing \n\ in multiline string literal.
 668
 669 2004-02-20  James E Wilson  <wilson@specifixinc.com>
 670
 671         * config/tc-ia64.c (slot_index): New arg before_relax.  Use instead of
 672         finalize_syms.
 673         (fixup_unw_records): New arg before_relax.  Pass to slot_index.
 674         (ia64_estimate_size_before_relax): New.
 675         (ia64_convert_frag): Pass 0 to fixup_unw_records.  Add comment.
 676         (generate_unwind_image): Pass 1 to fixup_unw_records.
 677         * config/tc-ia64.h (ia64_estimate_size_before_relax): Declare.
 678         (md_estimate_size_before_relax): Call ia64_estimate_size_before_relax.
 679
 680 2004-02-19  Jakub Jelinek  <jakub@redhat.com>
 681
 682         * stabs.c (generate_asm_file): Avoid warning about use of
 683         uninitialized variable.
 684
 685 2004-02-18  David Mosberger  <davidm@hpl.hp.com>
 686
 687         * config/tc-ia64.c (ia64_flush_insns): In addition to prologue,
 688         body, and endp, allow unwind records which do not have a "t"
 689         (time/instruction) field.
 690
 691 2004-02-17  Petko Manolov  <petkan@nucleusys.com>
 692
 693         * config/tc-arm.c (do_mav_dspsc_1): Correct offset of CRn.
 694         (do_mav_dspsc_2): Likewise.
 695         Fix accumulator registers move opcodes.
 696
 697 2004-02-13  Hannes Reinecke  <hare@suse.de>
 698             Jakub Jelinek  <jakub@redhat.com>
 699
 700         * dwarf2dbg.c (get_filenum): Do not read beyond allocated memory.
 701
 702 2004-02-10  Steve Ellcey  <sje@cup.hp.com>
 703
 704         * config/tc-ia64.h (ia64_frob_symbol): New declaration.
 705         (tc_frob_symbol): New macro definition.
 706         * config/tc-ia64.c (ia64_frob_symbol): New routine.
 707
 708 2004-02-09  Daniel Jacobowitz  <drow@mvista.com>
 709
 710         * config/tc-arm.c (md_begin): Mark .note.gnu.arm.ident as
 711         read-only.
 712
 713 2004-02-09  Nathan Sidwell  <nathan@codesourcery.com>
 714
 715         * read.h (IGNORE_OPCODE_CASE): Do not define. Replace with ...
 716         (TC_CASE_SENSITIVE): ... this.
 717         * read.c: Replace IGNORE_OPCODE_CASE with TC_CASE_SENSITIVE.
 718         * doc/internals.texi (TC_CASE_SENSITIVE): Document.
 719
 720 2004-02-06  James E Wilson  <wilson@specifixinc.com>
 721
 722         * config/tc-ia64.c (dot_endp): Delete call to output_endp.
 723         (generate_unwind_image): Re-add it here.
 724
 725 2004-02-06  Nathan Sidwell  <nathan@codesourcery.com>
 726
 727         * dwarf2dbg.c (DWARF2_ADDR_SIZE): Remove trailing ';'
 728         * read.h (SKIP_WHITESPACE): Turn into an expression.
 729         * read.c (read_a_source_file): A pseudo is removed by having a
 730         NULL handler.
 731
 732 2004-02-05  James E Wilson  <wilson@specifixinc.com>
 733
 734         * config/tc-ia64.c (output_endp): New.
 735         (count_bits): Delete.
 736         (ia64_flush_insns, process_one_record, optimize_unw_records): Handle
 737         endp unwind records.
 738         (fixup_unw_records): Handle endp unwind records.  Delete code for
 739         shortening prologue regions not followed by a body record.
 740         (dot_endp): Call add_unwind_entry to emit endp unwind record.
 741         * config/tc-ia64.h (unw_record_type): Add endp.
 742
 743 2004-02-03  James E Wilson  <wilson@specifixinc.com>
 744
 745         * config/tc-ia64.c (ia64_convert_frag): Call md_number_to_chars to
 746         fill padding bytes with zeroes.
 747         (emit_one_bundle): New locals last_ptr, end_ptr.  Rewrite code that
 748         sets unwind_record slot_number and slot_frag fields.
 749
 750 2004-02-02  Maciej W. Rozycki  <macro@ds2.pg.gda.pl>
 751
 752         * config/tc-mips.c (add_got_offset_hilo): New function.
 753         (macro): Use load_register() and add_got_offset_hilo() to load
 754         constants instead of hardcoding code sequences throughout.
 755
 756 2004-01-28  H.J. Lu  <hongjiu.lu@intel.com>
 757
 758         * config/tc-ia64.c (emit_one_bundle): Add proper indentation.
 759
 760 2004-01-26  Bernardo Innocenti  <bernie@develer.com>
 761
 762         * config/tc-m68k.h (EXTERN_FORCE_RELOC): Handle m68k-uclinux specially,
 763         like m68k-elf.
 764         * config/tc-m68k.c (RELAXABLE_SYMBOL): Use EXTERN_FORCE_RELOC instead
 765         of hard-coded test for TARGET_OS=elf.
 766
 767 2004-01-24  Chris Demetriou  <cgd@broadcom.com>
 768
 769         * config/tc-mips.c (hilo_interlocks): Change definition
 770         so that MIPS32, MIPS64 and later ISAs are included, along with
 771         the already-included machines.  Update comments.
 772
 773 2004-01-23  Daniel Jacobowitz  <drow@mvista.com>
 774
 775         * config/tc-arm.c (tc_gen_reloc): Improve error message for
 776         undefined local labels.
 777
 778 2004-01-23  Richard Sandiford  <rsandifo@redhat.com>
 779
 780         * config/tc-mips.c (load_address, macro): Update comments about
 781         NewABI GP relaxation.
 782
 783 2004-01-23  Richard Sandiford  <rsandifo@redhat.com>
 784
 785         * config/tc-mips.c (macro_build): Remove place and counter arguments.
 786         (mips_build_lui, macro_build_ldst_constoffset): Likewise.
 787         (mips16_macro_build, macro_build_jalr): Remove counter argument.
 788         (set_at, load_register, load_address, move_register): Likewise.
 789         (load_got_offset, add_got_offset): Likewise.
 790         Update all calls and tidy accordingly.
 791
 792 2004-01-23  Richard Sandiford  <rsandifo@redhat.com>
 793
 794         * config/tc-mips.c (RELAX_ENCODE): Remove WARN argument.
 795         (RELAX_FIRST, RELAX_SECOND): Turn into 8-bit quantities.
 796         (RELAX_USE_SECOND): Bump to 0x10000.
 797         (RELAX_SECOND_LONGER, RELAX_NOMACRO, RELAX_DELAY_SLOT): New flags.
 798         (mips_macro_warning): New variable.
 799         (md_assemble): Wrap macro expansion in macro_start() and macro_end().
 800         (s_cpload, s_cpsetup, s_cprestore, s_cpreturn): Likewise.
 801         (relax_close_frag): Set mips_macro_warning.first_frag.  Adjust use
 802         of RELAX_ENCODE.
 803         (append_insn): Update mips_macro_warning.sizes.
 804         (macro_start, macro_warning, macro_end): New functions.
 805         (macro_build): Don't emit warnings here.
 806         (macro_build_lui, md_estimate_size_before_relax): ...or here.
 807         (md_convert_frag): Check for cases where one macro alternative
 808         needs a warning and the other doesn't.  Emit a warning if the
 809         longer sequence was chosen.
 810
 811 2004-01-23  Richard Sandiford  <rsandifo@redhat.com>
 812
 813         * config/tc-mips.h (tc_frag_data_type, TC_FRAG_TYPE): Remove.
 814         * config/tc-mips.c (RELAX_ENCODE): Take three arguments: the size of
 815         the first sequence, the size of the second sequence, and a flag
 816         that says whether we should warn.
 817         (RELAX_OLD, RELAX_NEW, RELAX_RELOC[123]): Delete.
 818         (RELAX_FIRST, RELAX_SECOND): New.
 819         (mips_relax): New variable.
 820         (relax_close_frag, relax_start, relax_switch, relax_end): New fns.
 821         (append_insn): Remove "place" argument.  Use mips_relax.sequence
 822         rather than "place" to check whether we're expanding the second
 823         alternative of a relaxable macro.  Remove redundant check for
 824         branch relaxation.  If generating a normal insn, and there
 825         is not enough room in the current frag, call relax_close_frag()
 826         to close it.  Update mips_relax.sizes[].  Emit fixups for the
 827         second version of a relaxable macro.  Record the first relaxable
 828         fixup in mips_relax.  Remove tc_gen_reloc workaround.
 829         (macro_build): Remove all uses of "place".  Use mips_relax.sequence
 830         in the same way as in append_insn.
 831         (mips16_macro_build): Remove "place" argument.
 832         (macro_build_lui): As for macro_build.  Don't drop the add_symbol
 833         when generating the second version of a relaxable macro.
 834         (load_got_offset, add_got_offset): New functions.
 835         (load_address, macro): Use new relaxation machinery.  Remove
 836         tc_gen_reloc workarounds.
 837         (md_estimate_size_before_relax): Set RELAX_USE_SECOND if the second
 838         version of a relaxable macro is needed.  Return -RELAX_SECOND if the
 839         first version is needed.
 840         (tc_gen_reloc): Remove relaxation handling.
 841         (md_convert_frag): Go through the fixups for a relaxable macro and
 842         mark those that belong to the unneeded alternative as done.  If the
 843         second alternative is needed, adjust the fixup addresses to account
 844         for the deleted first alternative.
 845
 846 2004-01-23  Richard Sandiford  <rsandifo@redhat.com>
 847
 848         * frags.h (frag_room): Declare.
 849         * frags.c (frag_room): New function.
 850         * doc/internals.texi: Document it.
 851
 852 2004-01-22  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
 853
 854         * config/tc-mips.c (append_insn): Don't do r3900 interlock
 855         optimization for -mtune=r3900, as this will break on other CPUs.
 856
 857 2004-01-11  Tom Rix   <tcrix@worldnet.att.net>
 858
 859         * config/tc-m68hc11.c (build_indexed_byte): movb and movw cannot
 860         be relaxed, use fixup.
 861         (md_apply_fix3): Use 5 bit reloc from movb and movw fixup.
 862
 863 2004-01-19  Jakub Jelinek  <jakub@redhat.com>
 864
 865         * config/tc-sparc.c (sparc_ip): Disallow %f32-%f63 for single
 866         precision operands.
 867
 868 2004-01-14  Maciej W. Rozycki  <macro@ds2.pg.gda.pl>
 869
 870         * config/tc-mips.c (append_insn): Properly detect variant frags
 871         that preclude swapping of relaxed branches.  Correctly swap
 872         instructions between frags when dealing with relaxed branches.
 873
 874 2004-01-14  Maciej W. Rozycki  <macro@ds2.pg.gda.pl>
 875
 876         * acinclude.m4: Quote names of macros to be defined by AC_DEFUN
 877         throughout.
 878         * aclocal.m4: Regenerate.
 879         * configure: Regenerate.
 880
 881 2004-01-12  Anil Paranjpe  <anilp1@KPITCummins.com>
 882
 883         * config/tc-h8300.c (build_bytes): Apply relaxation to bit
 884         manipulation insns.
 885
 886 2004-01-12  Richard Sandiford  <rsandifo@redhat.com>
 887
 888         * config/tc-mips.c (macro_build_jalr): When adding an R_MIPS_JALR
 889         reloc, reserve space for the delay slot as well as the jalr itself.
 890
 891 2004-01-09  Paul Brook  <paul@codesourcery.com>
 892
 893         * config/tc-arm.c (do_vfp_reg2_from_sp2): Rename from do_vfp_sp_reg2.
 894         (do_vfp_sp2_from_reg2): New function.
 895         (insns): Use them.
 896         (do_vfp_dp_from_reg2): Check return values properly.
 897
 898 2004-01-08  Ian Lance Taylor  <ian@wasabisystems.com>
 899
 900         * config/tc-mips.c (warn_nops): Remove static variable.
 901         (macro): Remove test of warn_nops.
 902         (md_shortops): Remove 'n'.
 903         (md_parse_option): Remove 'n' case.
 904         (md_show_usage): Remove -n.
 905         * doc/as.texinfo (Overview): Remove MIPS -n option.
 906         * doc/c-mips.texi (MIPS Opts): Remove mention -n.
 907         * NEWS: Mention removal of MIPS -n option.
 908
 909         * config/tc-mips.c (ISA_HAS_COPROC_DELAYS): Remove.
 910         (cop_interlocks): Check ISA level.
 911         (cop_mem_interlocks): Define.
 912         (reg_needs_delay): Check cop_interlocks rather than
 913         ISA_HAS_COPROC_DELAYS.
 914         (append_insn): Likewise.  Use cop_mem_interlocks rather than
 915         directly checking mips_opts.isa.
 916         (mips_emit_delays): Likewise.
 917
 918 2004-01-07  H.J. Lu  <hongjiu.lu@intel.com>
 919
 920         * config/tc-ia64.c (unwind): Move next_slot_number and
 921         next_slot_frag to ...
 922         (unw_rec_list): Here.
 923         (free_list_records): Removed.
 924         (output_unw_records): Likewise.
 925         (generate_unwind_image): Make it void.
 926         (alloc_record): Initialize next_slot_number and next_slot_frag.
 927         (slot_index): Take .org, .space and .align into account.
 928         (fixup_unw_records): Don't set slot_number to 0. Use
 929         list->next_slot_number and list->next_slot_frag instead of
 930         unwind.next_slot_number and unwind.next_slot_frag.
 931         (ia64_convert_frag): New.
 932         (generate_unwind_image): Generate a rs_machine_dependent frag
 933         for unwind record.
 934         (emit_one_bundle): Use list->next_slot_number and
 935         list->next_slot_frag instead of unwind.next_slot_number and
 936         unwind.next_slot_frag.
 937
 938         * config/tc-ia64.h (md_convert_frag): Defined as
 939         ia64_convert_frag.
 940         (md_estimate_size_before_relax): Defined as (f)->fr_var.
 941
 942 2004-01-06  Alexandre Oliva  <aoliva@redhat.com>
 943
 944         2003-12-19  Alexandre Oliva  <aoliva@redhat.com>
 945         * config/tc-frv.h (md_apply_fix3): Don't define.
 946         * config/tc-frv.c (md_apply_fix3): New.  Shift/truncate %hi/%lo
 947         operands.
 948         * config/tc-frv.h (TC_FORCE_RELOCATION_SUB_LOCAL): Define.
 949         2003-10-07  Alexandre Oliva  <aoliva@redhat.com>
 950         * config/tc-frv.c (line_separator_chars): Add `!'.
 951         2003-09-19  Alexandre Oliva  <aoliva@redhat.com>
 952         * config/tc-frv.c (md_assemble): Clear insn upfront.
 953         2003-09-18  Alexandre Oliva  <aoliva@redhat.com>
 954         * config/tc-frv.c (OPTION_FDPIC): New macro.
 955         (md_longopts): Add mfdpic.
 956         (md_parse_option): Handle it.
 957         2003-08-04  Alexandre Oliva  <aoliva@redhat.com>
 958         * config/tc-frv.c (md_cgen_lookup_reloc) <FRV_OPERAND_D12,
 959         FRV_OPERAND_S12>: Use reloc type encoded in fix-up.
 960         (frv_pic_ptr): Parse funcdesc.
 961
 962 2004-01-05  Maciej W. Rozycki  <macro@ds2.pg.gda.pl>
 963
 964         * doc/as.texinfo: Let texi2pod parse asconfig.texi and
 965         gasver.texi.  Remove duplicate symbol definitions for texi2pod.
 966
 967 2004-01-05  Maciej W. Rozycki  <macro@ds2.pg.gda.pl>
 968
 969         * Makefile.am (Makefile): Move the dependency on
 970         $(BFDDIR)/configure.in to...
 971         (CONFIG_STATUS_DEPENDENCIES): ... here.
 972         (AUTOMAKE_OPTIONS): Require automake 1.8.
 973         * Makefile.in: Regenerate.
 974         * doc/Makefile.am (BASEDIR, BFDDIR): Define.
 975         (CONFIG_STATUS_DEPENDENCIES): Add a dependency on
 976         $(BFDDIR)/configure.in here as well.
 977         * doc/Makefile.in: Regenerate.
 978
 979 2004-01-05  Maciej W. Rozycki  <macro@ds2.pg.gda.pl>
 980
 981         * Makefile.am (install, install-info, RECURSIVE_TARGETS): Remove.
 982         * Makefile.in: Regenerate.
 983         * aclocal.m4: Regenerate.
 984         * doc/Makefile.am (install, install-info): Remove.
 985         (install-data-local): A new hook for install-info.
 986         (AUTOMAKE_OPTIONS): Require automake 1.8.
 987         * doc/Makefile.in: Regenerate.
 988
 989 2004-01-02  Nutan Singh <nutan@kpitcummins.com>
 990
 991         * doc/c-sh.texi: Update description about floating point behavior
 992         of SH family.
 993
 994 2004-01-02  Bernardo Innocenti  <bernie@develer.com>
 995
 996         * configure.in: Add m68k-uClinux target.
 997         * configure: Regenerate.
 998
 999 For older changes see ChangeLog-0203
1000 \f
1001 Local Variables:
1002 mode: change-log
1003 left-margin: 8
1004 fill-column: 74
1005 version-control: never
1006 End: