gas/ChangeLog

   1 2013-07-07  Richard Sandiford  <rdsandiford@googlemail.com>
   2
   3         * config/tc-mips.c (validate_mips_insn): Remove "[" and "]" handling.
   4         (mips_ip): Likewise.  Do not set is_mdmx for INSN_5400 instructions.
   5         Check constraints on the VR5400 RZU.OB, SLL.OB and SRL.OB instructions.
   6
   7 2013-07-07  Richard Sandiford  <rdsandiford@googlemail.com>
   8
   9         * config/tc-mips.c (mips_ip): Preserve the real bit number for "+p".
  10         Require the msb to be <= 31 for "+s".  Check that the size is <= 31
  11         for both "+s" and "+S".
  12
  13 2013-07-07  Richard Sandiford  <rdsandiford@googlemail.com>
  14
  15         * config/tc-mips.c (validate_mips_insn, validate_micromips_insn):
  16         (mips_ip, mips16_ip): Handle "+i".
  17
  18 2013-07-07  Richard Sandiford  <rdsandiford@googlemail.com>
  19
  20         * config/tc-mips.c (mips32_to_micromips_reg_h_map): Delete.
  21         (micromips_to_32_reg_h_map): Rename to...
  22         (micromips_to_32_reg_h_map1): ...this.
  23         (micromips_to_32_reg_i_map): Rename to...
  24         (micromips_to_32_reg_h_map2): ...this.
  25         (mips_lookup_reg_pair): New function.
  26         (gpr_write_mask, macro): Adjust after above renaming.
  27         (validate_micromips_insn): Remove "mi" handling.
  28         (mips_ip): Likewise.  Parse both registers in a pair for "mh".
  29
  30 2013-07-07  Richard Sandiford  <rdsandiford@googlemail.com>
  31
  32         * config/tc-mips.c (validate_mips_insn, validate_micromips_insn)
  33         (mips_ip): Remove "+D" and "+T" handling.
  34
  35 2013-07-05  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>
  36
  37         * config/tc-s390.c (md_gather_operands, md_apply_fix): Support new
  38         relocs.
  39
  40 2013-07-03  Marcus Shawcroft  <marcus.shawcroft@arm.com>
  41
  42         * config/tc-aarch64.c (reloc_table): Merge got_prel19 into got.
  43
  44 2013-07-02  Marcus Shawcroft  <marcus.shawcroft@arm.com>
  45
  46         * config/tc-aarch64.c (md_apply_fix): Reorder case values.
  47         (aarch64_force_relocation): Likewise.
  48
  49 2013-07-02  Alan Modra  <amodra@gmail.com>
  50
  51         * config/tc-ppc.c (ppc_elf_adjust_symtab): Don't make .TOC. weak.
  52
  53 2013-06-26  Maciej W. Rozycki  <macro@codesourcery.com>
  54
  55         * doc/as.texinfo (Overview): Remove @samp from MIPS ISA names.
  56         * doc/c-mips.texi (MIPS Options): Remove @sc from MIPS ISA names.
  57         Replace @sc{mips16} with literal `MIPS16'.
  58         (MIPS ISA): Replace @sc{mips3} with literal `MIPS III'.
  59
  60 2013-06-26  Yufeng Zhang  <yufeng.zhang@arm.com>
  61
  62         * config/tc-aarch64.c (reloc_table): Replace
  63         BFD_RELOC_AARCH64_LD64_GOT_LO12_NC with
  64         BFD_RELOC_AARCH64_LD_GOT_LO12_NC; likewise to
  65         BFD_RELOC_AARCH64_TLSDESC_LD64_LO12_NC and
  66         BFD_RELOC_AARCH64_TLSIE_LD_GOTTPREL_LO12_NC.
  67         (md_apply_fix): Handle BFD_RELOC_AARCH64_LD_GOT_LO12_NC,
  68         BFD_RELOC_AARCH64_LD32_GOT_LO12_NC,
  69         BFD_RELOC_AARCH64_TLSDESC_LD_LO12_NC,
  70         BFD_RELOC_AARCH64_TLSDESC_LD32_LO12_NC,
  71         BFD_RELOC_AARCH64_TLSIE_LD_GOTTPREL_LO12_NC and
  72         BFD_RELOC_AARCH64_TLSIE_LD32_GOTTPREL_LO12_NC.
  73         (aarch64_force_relocation): Likewise.
  74
  75 2013-06-26  Yufeng Zhang  <yufeng.zhang@arm.com>
  76
  77         * config/tc-aarch64.c (ilp32_p): New static variable.
  78         (elf64_aarch64_target_format): Return the target according to the
  79         value of 'ilp32_p'.
  80         (md_begin): Determine 'mach' according to the value of 'ilp32_p'.
  81         (aarch64_opts): Add support for options '-milp32' and '-mlp64'.
  82         (aarch64_dwarf2_addr_size): New function.
  83         * config/tc-aarch64.h (aarch64_dwarf2_addr_size): New declaration.
  84         (DWARF2_ADDR_SIZE): New define.
  85
  86 2013-06-26  Richard Sandiford  <rdsandiford@googlemail.com>
  87
  88         * doc/c-mips.texi: Use ISA instead of @sc{isa}.
  89
  90 2013-06-26  Richard Sandiford  <rdsandiford@googlemail.com>
  91
  92         * config/tc-mips.c (validate_mips_insn): Use STYPE rather than SHAMT.
  93
  94 2013-06-25  Maciej W. Rozycki  <macro@codesourcery.com>
  95
  96         * config/tc-mips.c (mips_set_options): Add insn32 member.
  97         (mips_opts): Initialize it.
  98         (NOP_INSN, NOP_INSN_SIZE): Handle insn32 mode.
  99         (options): Add OPTION_INSN32 and OPTION_NO_INSN32 enum values.
 100         (md_longopts): Add "minsn32" and "mno-insn32" options.
 101         (is_size_valid): Handle insn32 mode.
 102         (md_assemble): Pass instruction string down to macro.
 103         (brk_fmt): Add second dimension and insn32 mode initializers.
 104         (mfhl_fmt): Likewise.
 105         (BRK_FMT, MFHL_FMT): Handle insn32 mode.
 106         (macro_build) <'c'>: Handle microMIPS 32-bit BREAK encoding.
 107         (macro_build_jalr, move_register): Handle insn32 mode.
 108         (macro_build_branch_rs): Likewise.
 109         (macro): Handle insn32 mode.
 110         <M_JRADDIUSP>, <M_JRC>, <M_MOVEP>: New cases.
 111         (mips_ip): Handle insn32 mode.
 112         (md_parse_option): Handle OPTION_INSN32 and OPTION_NO_INSN32.
 113         (s_mipsset): Handle "insn32" and "noinsn32" pseudo-ops.
 114         (mips_handle_align): Handle insn32 mode.
 115         (md_show_usage): Add -minsn32 and -mno-insn32.
 116
 117         * doc/as.texinfo (Target MIPS options): Add -minsn32 and
 118         -mno-insn32 options.
 119         (-minsn32, -mno-insn32): New options.
 120         * doc/c-mips.texi (MIPS Opts): Add -minsn32 and -mno-insn32
 121         options.
 122         (MIPS assembly options): New node.  Document .set insn32 and
 123         .set noinsn32.
 124         (MIPS-Dependent): List the new node.
 125
 126 2013-06-25  Nick Clifton  <nickc@redhat.com>
 127
 128         * config/tc-msp430.c (msp430_srcoperand): Do not allow the use of
 129         the PC in indirect addressing on 430xv2 parts.
 130         (msp430_operands): Add version test to hardware bug encoding
 131         restrictions.
 132
 133 2013-06-24  Roland McGrath  <mcgrathr@google.com>
 134
 135         * config/tc-arm.c (parse_reg_list): Use skip_past_char for '}',
 136         so it skips whitespace before it.
 137         (s_arm_unwind_save_mmxwr, s_arm_unwind_save_mmxwcg): Likewise.
 138
 139         * config/tc-arm.c (arm_symbol_chars): Include '{' and '}'.
 140         (arm_reg_parse_multi): Skip whitespace first.
 141         (parse_reg_list): Likewise.
 142         (parse_vfp_reg_list): Likewise.
 143         (s_arm_unwind_save_mmxwcg): Likewise.
 144
 145 2013-06-24  Nick Clifton  <nickc@redhat.com>
 146
 147         PR gas/15623
 148         * config/tc-arm.c (do_t_smc): Mark as ending an IT block.
 149
 150 2013-06-23  Richard Sandiford  <rdsandiford@googlemail.com>
 151
 152         * config/tc-mips.c (mips_ip): Fix swapped bit numbers in comments.
 153
 154 2013-06-23  Richard Sandiford  <rdsandiford@googlemail.com>
 155
 156         * config/tc-mips.c: Assert that offsetT and valueT are at least
 157         8 bytes in size.
 158         (GPR_SMIN, GPR_SMAX): New macros.
 159         (macro, mips_ip): Remove code for 4-byte valueT and offsetT.
 160
 161 2013-06-22  Richard Sandiford  <rdsandiford@googlemail.com>
 162
 163         * config/tc-mips.c: Remove OBJ_ELF, OBJ_MAYBE_ELF and IS_ELF
 164         conditions.  Remove any code deselected by them.
 165         (s_mips_frame, s_mips_mask): Handle ECOFF_DEBUGGING case first.
 166
 167 2013-06-22  Richard Sandiford  <rdsandiford@googlemail.com>
 168
 169         * NEWS: Note removal of ECOFF support.
 170         * doc/as.texinfo (--emulation): Update for the removal of MIPS ECOFF.
 171         * Makefile.am (TARG_ENV_HFILES): Remove config/te-lnews.h.
 172         (MULTI_CFILES): Remove config/e-mipsecoff.c.
 173         * Makefile.in: Regenerate.
 174         * configure.in: Remove MIPS ECOFF references.
 175         (mips-sony-bsd*, mips-*-bsd*, mips-*-lnews*-ecoff, mips-*-*-ecoff):
 176         Delete cases.
 177         (mips-*-irix5*-*, mips*-*-linux*-*, mips*-*-freebsd*)
 178         (mips*-*-kfreebsd*-gnu, mips-*-*-elf): Fold into...
 179         (mips-*-*): ...this single case.
 180         (mipsbecoff, mipslecoff, mipsecoff): Remove emulations.  Expect
 181         MIPS emulations to be e-mipself*.
 182         * configure: Regenerate.
 183         * configure.tgt (mips-sony-bsd*, mips-*-ultrix*, mips-*-osf*)
 184         (mips-*-ecoff*, mips-*-pe*, mips-*-irix*, ips-*-lnews*, mips-*-riscos*)
 185         (mips-*-sysv*): Remove coff and ecoff cases.
 186         * as.c (mipsbecoff, mipslecoff, mipsecoff): Remove.
 187         * ecoff.c: Remove reference to MIPS ECOFF.
 188         * config/e-mipsecoff.c, config/te-lnews.h: Delete files.
 189         * config/tc-mips.c (ECOFF_LITTLE_FORMAT): Delete.
 190         (RDATA_SECTION_NAME, mips_target_form): Remove COFF and ECOFF cases.
 191         (mips_hi_fixup): Tweak comment.
 192         (append_insn): Require a howto.
 193         (mips_after_parse_args): Remove OBJ_MAYBE_ECOFF code.
 194
 195 2013-06-22  Richard Sandiford  <rdsandiford@googlemail.com>
 196
 197         * doc/as.texinfo: Use MIPS rather than @sc{mips} throughout.
 198         Use "CPU" instead of "cpu".
 199         * doc/c-mips.texi: Likewise.
 200         (MIPS Opts): Rename to MIPS Options.
 201         (MIPS option stack): Rename to MIPS Option Stack.
 202         (MIPS ASE instruction generation overrides): Rename to
 203         MIPS ASE Instruction Generation Overrides (for now).
 204         (MIPS floating-point): Rename to MIPS Floating-Point.
 205
 206 2013-06-22  Richard Sandiford  <rdsandiford@googlemail.com>
 207
 208         * doc/c-mips.texi (MIPS Macros): New section.
 209         (MIPS Object): Replace with...
 210         (MIPS Small Data): ...this new section.
 211
 212 2013-06-22  Richard Sandiford  <rdsandiford@googlemail.com>
 213
 214         * doc/c-mips.texi (MIPS symbol sizes): Move section further up file.
 215         Capitalize name.  Use @kindex instead of @cindex for .set entries.
 216
 217 2013-06-22  Richard Sandiford  <rdsandiford@googlemail.com>
 218
 219         * doc/c-mips.texi (MIPS Stabs): Remove section.
 220
 221 2013-06-20  Richard Sandiford  <rdsandiford@googlemail.com>
 222
 223         * config/tc-mips.c (ISA_SUPPORTS_SMARTMIPS, ISA_SUPPORTS_DSP_ASE)
 224         (ISA_SUPPORTS_DSP64_ASE, ISA_SUPPORTS_DSPR2_ASE, ISA_SUPPORTS_EVA_ASE)
 225         (ISA_SUPPORTS_MT_ASE, ISA_SUPPORTS_MCU_ASE, ISA_SUPPORTS_VIRT_ASE)
 226         (ISA_SUPPORTS_VIRT64_ASE): Delete.
 227         (mips_ase): New structure.
 228         (mips_ases): New table.
 229         (FP64_ASES): New macro.
 230         (mips_ase_groups): New array.
 231         (mips_isa_rev, mips_ase_mask, mips_check_isa_supports_ase)
 232         (mips_check_isa_supports_ases, mips_set_ase, mips_lookup_ase): New
 233         functions.
 234         (is_opcode_valid): Use mips_ases to get the 64-bit ASE flags.
 235         (md_parse_option): Use mips_ases and mips_set_ase instead of
 236         separate case statements for each ASE option.
 237         (mips_after_parse_args): Use FP64_ASES.  Use
 238         mips_check_isa_supports_ases to check the ASEs against
 239         other options.
 240         (s_mipsset): Use mips_ases and mips_set_ase instead of
 241         separate if statements for each ASE option.  Use
 242         mips_check_isa_supports_ases, even when a non-ASE option
 243         is specified.
 244
 245 2013-06-19  Greta Yorsh  <Greta.Yorsh@arm.com>
 246
 247         * config/tc-arm.c (arm_cpus): Add support for Cortex-A12.
 248
 249 2013-06-18  Richard Sandiford  <rdsandiford@googlemail.com>
 250
 251         * config/tc-mips.c (md_shortopts, options, md_longopts)
 252         (md_longopts_size): Move earlier in file.
 253
 254 2013-06-18  Richard Sandiford  <rdsandiford@googlemail.com>
 255
 256         * config/tc-mips.c (mips_set_options): Replace separate "ase_*" fields
 257         with a single "ase" bitmask.
 258         (mips_opts): Update accordingly.
 259         (file_ase, file_ase_explicit): New variables.
 260         (file_ase_mips3d, file_ase_mdmx, file_ase_smartmips, file_ase_dsp)
 261         (file_ase_dspr2, file_ase_eva, file_ase_mt, file_ase_virt): Delete.
 262         (ISA_HAS_ROR): Adjust for mips_set_options change.
 263         (is_opcode_valid): Take the base ase mask directly from mips_opts.
 264         (mips_ip): Adjust for mips_set_options change.
 265         (md_parse_option): Likewise.  Update file_ase_explicit.
 266         (mips_after_parse_args): Adjust for mips_set_options change.
 267         Use bitmask operations to select the default ASEs.  Set file_ase
 268         rather than individual per-ASE variables.
 269         (s_mipsset): Adjust for mips_set_options change.
 270         (mips_elf_final_processing): Test file_ase rather than
 271         file_ase_mdmx.  Remove commented-out code.
 272
 273 2013-06-18  Richard Sandiford  <rdsandiford@googlemail.com>
 274
 275         * config/tc-mips.c (mips_cpu_info): Add an "ase" field.
 276         (MIPS_CPU_ASE_SMARTMIPS, MIPS_CPU_ASE_DSP, MIPS_CPU_ASE_MT)
 277         (MIPS_CPU_ASE_MIPS3D, MIPS_CPU_ASE_MDMX, MIPS_CPU_ASE_DSPR2)
 278         (MIPS_CPU_ASE_MCU, MIPS_CPU_ASE_VIRT, MIPS_CPU_ASE_EVA): Delete.
 279         (mips_after_parse_args): Use the new "ase" field to choose
 280         the default ASEs.
 281         (mips_cpu_info_table): Move ASEs from the "flags" field to the
 282         "ase" field.
 283
 284 2013-06-18  Richard Earnshaw  <rearnsha@arm.com>
 285
 286         * config/tc-arm.c (symbol_preemptible): New function.
 287         (relax_branch): Use it.
 288
 289 2013-06-17  Catherine Moore  <clm@codesourcery.com>
 290             Maciej W. Rozycki  <macro@codesourcery.com>
 291             Chao-Ying Fu  <fu@mips.com>
 292
 293         * config/tc-mips.c (mips_set_options): Add ase_eva.
 294         (mips_set_options mips_opts): Add ase_eva.
 295         (file_ase_eva): Declare.
 296         (ISA_SUPPORTS_EVA_ASE): Define.
 297         (IS_SEXT_9BIT_NUM): Define.
 298         (MIPS_CPU_ASE_EVA): Define.
 299         (is_opcode_valid): Add support for ase_eva.
 300         (macro_build): Likewise.
 301         (macro): Likewise.
 302         (validate_mips_insn): Likewise.
 303         (validate_micromips_insn): Likewise.
 304         (mips_ip): Likewise.
 305         (options): Add OPTION_EVA and OPTION_NO_EVA.
 306         (md_longopts): Add -meva and -mno-eva.
 307         (md_parse_option): Process new options.
 308         (mips_after_parse_args): Check for valid EVA combinations.
 309         (s_mipsset): Likewise.
 310
 311 2013-06-14  Richard Sandiford  <rsandifo@linux.vnet.ibm.com>
 312
 313         * dwarf2dbg.h (dwarf2_move_insn): Declare.
 314         * dwarf2dbg.c (line_subseg): Add pmove_tail.
 315         (get_line_subseg): Add create_p argument.  Initialize pmove_tail.
 316         (dwarf2_gen_line_info_1): Update call accordingly.
 317         (dwarf2_move_insn): New function.
 318         * config/tc-mips.c (append_insn): Use dwarf2_move_insn.
 319
 320 2013-06-14  Richard Sandiford  <rsandifo@linux.vnet.ibm.com>
 321
 322         Revert:
 323
 324         2011-09-05  Richard Sandiford  <rdsandiford@googlemail.com>
 325
 326         PR gas/13024
 327         * dwarf2dbg.c (pending_lines, pending_lines_tail): New variables.
 328         (dwarf2_gen_line_info_1): Delete.
 329         (dwarf2_push_line, dwarf2_flush_pending_lines): New functions.
 330         (dwarf2_gen_line_info, dwarf2_emit_label): Use them.
 331         (dwarf2_consume_line_info): Call dwarf2_flush_pending_lines.
 332         (dwarf2_directive_loc): Push previous .locs instead of generating
 333         them immediately.
 334
 335 2013-06-13  Chao-ying Fu  <Chao-ying.Fu@imgtec.com>
 336
 337         * config/tc-mips.c (ISA_SUPPORTS_VIRT_ASE): Support micromips.
 338         (ISA_SUPPORTS_VIRT64_ASE): Support 64-bit micromips.
 339
 340 2013-06-13  Nick Clifton  <nickc@redhat.com>
 341
 342         PR gas/15602
 343         * config/tc-m68k.h (TC_CHECK_ADJUSTED_BROKEN_DOT_WORD): Define.
 344         * config/tc-m68k.c (tc_m68k_check_adjusted_broken_word): New
 345         function.  Generates an error if the adjusted offset is out of a
 346         16-bit range.
 347
 348 2013-06-12  Sandra Loosemore  <sandra@codesourcery.com>
 349
 350         * config/tc-nios2.c (md_apply_fix):  Mask constant
 351         BFD_RELOC_NIOS2_HIADJ16 value to 16 bits.
 352
 353 2013-06-10  Maciej W. Rozycki  <macro@codesourcery.com>
 354
 355         * config/tc-mips.c (append_insn): Don't do branch relaxation for
 356         MIPS-3D instructions either.
 357         (md_convert_frag): Update the COPx branch mask accordingly.
 358
 359         * config/tc-mips.c (md_show_usage): Document --[no-]relax-branch
 360         option.
 361         * doc/as.texinfo (Overview): Add --relax-branch and
 362         --no-relax-branch.
 363         * doc/c-mips.texi (MIPS Opts): Document --relax-branch and
 364         --no-relax-branch.
 365
 366 2013-06-09  Sandra Loosemore  <sandra@codesourcery.com>
 367
 368         * config/tc-nios2.c (nios2_parse_args):  Allow trap argument to
 369         omitted.
 370
 371 2013-06-08  Catherine Moore  <clm@codesourcery.com>
 372
 373         * config/tc-mips.c (is_opcode_valid):  Build ASE mask.
 374         (is_opcode_valid_16): Pass ase value to opcode_is_member.
 375         (append_insn): Change INSN_xxxx to ASE_xxxx.
 376
 377 2013-06-01  George Thomas <george.thomas@atmel.com>
 378
 379         * gas/config/tc-avr.c: Change ISA for devices with USB support to
 380         AVR_ISA_XMEGAU
 381
 382 2013-05-31  H.J. Lu  <hongjiu.lu@intel.com>
 383
 384         * config/tc-i386.c (md_begin): Don't align text/data/bss sections
 385         for ELF.
 386
 387 2013-05-31  Paul Brook  <paul@codesourcery.com>
 388
 389         gas/
 390         * config/tc-mips.c (s_ehword): New.
 391
 392 2013-05-30  Paul Brook  <paul@codesourcery.com>
 393
 394         * config/tc-mips.c (md_apply_fix): Support BFD_RELOC_MIPS_EH.
 395
 396 2013-05-29  Maciej W. Rozycki  <macro@codesourcery.com>
 397
 398         * write.c (resolve_reloc_expr_symbols): On REL targets don't
 399         convert relocs who have no relocatable field either.  Rephrase
 400         the conditional so that the PC-relative check is only applied
 401         for REL targets.
 402
 403 2013-05-28  Chao-ying Fu  <Chao-ying.Fu@imgtec.com>
 404
 405         * config/tc-mips.c (macro) <ld>: Don't use $zero for address
 406         calculation.
 407
 408 2013-05-28  Yufeng Zhang  <yufeng.zhang@arm.com>
 409
 410         * config/tc-aarch64.c (reloc_table): Update to use
 411         BFD_RELOC_AARCH64_TLSDESC_ADR_PAGE21 instead of
 412         BFD_RELOC_AARCH64_TLSDESC_ADR_PAGE.
 413         (md_apply_fix): Likewise.
 414         (aarch64_force_relocation): Likewise.
 415
 416 2013-05-28  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>
 417
 418         * config/tc-arm.c (it_fsm_post_encode): Improve
 419         warning messages about deprecated IT block formats.
 420
 421 2013-05-28  Marcus Shawcroft  <marcus.shawcroft@arm.com>
 422
 423         * config/tc-aarch64.c (md_apply_fix): Move value range checking
 424         inside fx_done condition.
 425
 426 2013-05-22  Jürgen Urban  <JuergenUrban@gmx.de>
 427
 428         * config/tc-mips.c (macro): Handle M_LQC2_AB and M_SQC2_AB.
 429
 430 2013-05-20  Peter Bergner <bergner@vnet.ibm.com>
 431
 432         * config/tc-ppc.c (ppc_setup_opcodes): Use new_seg to fix error
 433         and clean up warning when using PRINT_OPCODE_TABLE.
 434
 435 2013-05-20  Alan Modra  <amodra@gmail.com>
 436
 437         * config/tc-ppc.c (md_apply_fix): Hoist code common to insn
 438         and data fixups performing shift/high adjust/sign extension on
 439         fieldval.  Sink fx_pcrel handling and checks.  Use fixP->fx_size
 440         when writing data fixups rather than recalculating size.
 441
 442 2013-05-16  Jan-Benedict Glaw  <jbglaw@lug-owl.de>
 443
 444         * doc/c-msp430.texi: Fix typo.
 445
 446 2013-05-16  Tristan Gingold  <gingold@adacore.com>
 447
 448         * config/tc-ppc.c (ppc_is_toc_sym): Symbols of class XMC_TC
 449         are also TOC symbols.
 450
 451 2013-05-16  Nick Clifton  <nickc@redhat.com>
 452
 453         * config/tc-msp430.c: Make -mmcu recognise more part numbers.
 454         Add -mcpu command to specify core type.
 455         * doc/c-msp430.texi: Update documentation.
 456
 457 2013-05-09  Andrew Pinski  <apinski@cavium.com>
 458
 459         * config/tc-mips.c (struct mips_set_options): New ase_virt field.
 460         (mips_opts): Update for the new field.
 461         (file_ase_virt): New variable.
 462         (ISA_SUPPORTS_VIRT_ASE): New macro.
 463         (ISA_SUPPORTS_VIRT64_ASE): New macro.
 464         (MIPS_CPU_ASE_VIRT): New define.
 465         (is_opcode_valid): Handle ase_virt.
 466         (macro_build): Handle "+J".
 467         (validate_mips_insn): Likewise.
 468         (mips_ip): Likewise.
 469         (enum options): Add OPTION_VIRT and OPTION_NO_VIRT.
 470         (md_longopts): Add mvirt and mnovirt
 471         (md_parse_option): Handle OPTION_VIRT and OPTION_NO_VIRT.
 472         (mips_after_parse_args): Handle ase_virt field.
 473         (s_mipsset): Handle "virt" and "novirt".
 474         (mips_elf_final_processing): Add a comment about virt ASE might need
 475         a new flag.
 476         (md_show_usage): Print out the usage of -mvirt and mno-virt options.
 477         * doc/c-mips.texi: Document -mvirt and -mno-virt.
 478         Document ".set virt" and ".set novirt".
 479
 480 2013-05-09  Alan Modra  <amodra@gmail.com>
 481
 482         * config/tc-ppc.c (md_apply_fix): Sign extend fieldval under
 483         control of operand flag bits.
 484
 485 2013-05-07  Alan Modra  <amodra@gmail.com>
 486
 487         * config/tc-ppc.c (PPC_VLE_SPLIT16A): Delete unused macro.
 488         (PPC_VLE_SPLIT16D, PPC_VLE_LO16A, PPC_VLE_LO16D): Likewise.
 489         (PPC_VLE_HI16A, PPC_VLE_HI16D): Likewise.
 490         (PPC_VLE_HA16A, PPC_VLE_HA16D): Likewise.
 491         (md_apply_fix): Set fx_no_overflow for assorted relocations.
 492         Shift and sign-extend fieldval for use by some VLE reloc
 493         operand->insert functions.
 494
 495 2013-05-06  Paul Brook  <paul@codesourcery.com>
 496             Catherine Moore  <clm@codesourcery.com>
 497
 498         * config/tc-mips.c (md_pcrel_from): Handle BFD_RELOC_32_PCREL.
 499         (limited_pcrel_reloc_p): Likewise.
 500         (md_apply_fix): Likewise.
 501         (tc_gen_reloc): Likewise.
 502
 503 2013-05-06  Richard Sandiford  <rdsandiford@googlemail.com>
 504
 505         * config/tc-mips.c (limited_pcrel_reloc_p): New function.
 506         (mips_fix_adjustable): Adjust pc-relative check to use
 507         limited_pc_reloc_p.
 508
 509 2013-05-02  Richard Sandiford  <rdsandiford@googlemail.com>
 510
 511         * config/tc-mips.c (mips_pseudo_table): Add stabd and stabs entries.
 512         (s_mips_stab): Do not restrict to stabn only.
 513
 514 2013-05-02  Nick Clifton  <nickc@redhat.com>
 515
 516         * config/tc-msp430.c: Add support for the MSP430X architecture.
 517         Add code to insert a NOP instruction after any instruction that
 518         might change the interrupt state.
 519         Add support for the LARGE memory model.
 520         Add code to initialise the .MSP430.attributes section.
 521         * config/tc-msp430.h: Add support for the MSP430X architecture.
 522         * doc/c-msp430.texi: Document the new -mL and -mN command line
 523         options.
 524         * NEWS: Mention support for the MSP430X architecture.
 525
 526 2013-05-01  Maciej W. Rozycki  <macro@codesourcery.com>
 527
 528         * configure.tgt: Replace alpha*-*-linuxecoff* pattern with
 529         alpha*-*-linux*ecoff*.
 530
 531 2013-04-30  Chao-ying Fu  <Chao-ying.Fu@imgtec.com>
 532
 533         * config/tc-mips.c (mips_ip): Add sizelo.
 534         For "+C", "+G", and "+H", set sizelo and compare against it.
 535
 536 2013-04-29  Nick Clifton  <nickc@redhat.com>
 537
 538         * as.c (Options): Add -gdwarf-sections.
 539         (parse_args): Likewise.
 540         * as.h (flag_dwarf_sections): Declare.
 541         * dwarf2dbg.c (emit_fixed_inc_line_addr): Skip section changes.
 542         (process_entries): When -gdwarf-sections is enabled generate
 543         fragmentary .debug_line sections.
 544         (out_debug_line): Set the section for the .debug_line section end
 545         symbol.
 546         * doc/as.texinfo: Document -gdwarf-sections.
 547         * NEWS: Mention -gdwarf-sections.
 548
 549 2013-04-26  Christian Groessler  <chris@groessler.org>
 550
 551         * config/tc-z8k.c (md_parse_option): Set z8k_target_from_cmdline
 552         according to the target parameter.  Don't call s_segm since s_segm
 553         calls bfd_set_arch_mach using stdoutput, but stdoutput isn't
 554         initialized yet.
 555         (md_begin): Call s_segm according to target parameter from command
 556         line.
 557
 558 2013-04-25  Alan Modra  <amodra@gmail.com>
 559
 560         * configure.in: Allow little-endian linux.
 561         * configure: Regenerate.
 562
 563 2013-04-24  Sandra Loosemore  <sandra@codesourcery.com>
 564
 565         * config/tc-nios2.c (nios2_control_register_arg_p): Rename
 566         "fstatus" control register to "eccinj".
 567
 568 2013-04-19  Kai Tietz  <ktietz@redhat.com>
 569
 570         * configure.tgt (i386-*-cygwin): Handle x86_64 cygwin.
 571
 572 2013-04-15  Julian Brown  <julian@codesourcery.com>
 573
 574         * expr.c (add_to_result, subtract_from_result): Make global.
 575         * expr.h (add_to_result, subtract_from_result): Add prototypes.
 576         * config/tc-sh.c (sh_optimize_expr): Use add_to_result,
 577         subtract_from_result to handle extra bit of precision for .sleb128
 578         directive operands.
 579
 580 2013-04-10  Julian Brown  <julian@codesourcery.com>
 581
 582         * read.c (convert_to_bignum): Add sign parameter. Use it
 583         instead of X_unsigned to determine sign of resulting bignum.
 584         (emit_expr): Pass extra argument to convert_to_bignum.
 585         (emit_leb128_expr): Use X_extrabit instead of X_unsigned. Pass
 586         X_extrabit to convert_to_bignum.
 587         (parse_bitfield_cons): Set X_extrabit.
 588         * expr.c (make_expr_symbol, expr_build_uconstant, operand):
 589         Initialise X_extrabit field as appropriate.
 590         (add_to_result): New.
 591         (subtract_from_result): New.
 592         (expr): Use above.
 593         * expr.h (expressionS): Add X_extrabit field.
 594
 595 2013-04-10  Jan Beulich <jbeulich@suse.com>
 596
 597         * gas/config/tc-arm.c (encode_arm_addr_mode_3): Only reject base
 598         register being PC when is_t or writeback, and use distinct
 599         diagnostic for the latter case.
 600
 601 2013-04-10  Jan Beulich <jbeulich@suse.com>
 602
 603         * gas/config/tc-arm.c (parse_operands): Re-write
 604         po_barrier_or_imm().
 605         (do_barrier): Remove bogus constraint().
 606         (do_t_barrier): Remove.
 607
 608 2013-04-09 Joerg Wunsch <joerg.wunsch@atmel.com>
 609
 610         * gas/config/tc-avr.c (mcu_types): Add ATmega64RFR2,
 611         ATmega644RFR2, ATmega128RFR2, ATmega1284RFR2, ATmega256RFR2,
 612         ATmega2564RFR2
 613         * gas/doc/c-avr.texi (-mmcu documentation): Likewise.
 614
 615 2013-04-09  Jan Beulich <jbeulich@suse.com>
 616
 617         * gas/config/tc-arm.c (do_vmrs): Accept all control registers.
 618         Use local variable Rt in more places.
 619         (do_vmsr): Accept all control registers.
 620
 621 2013-04-09  Jan Beulich <jbeulich@suse.com>
 622
 623         * gas/config/tc-arm.c (do_neon_mov): Fake an instruction suffix
 624         if there was none specified for moves between scalar and core
 625         register.
 626
 627 2013-04-09  Jan Beulich <jbeulich@suse.com>
 628
 629         * gas/config/tc-arm.c (do_neon_ldx_stx): Reject VSTn in the
 630         NEON_ALL_LANES case.
 631
 632 2013-04-08  Jan Beulich <jbeulich@suse.com>
 633
 634         * gas/config/tc-arm.c (do_neon_ldr_str): Correct disgnostics for
 635         PC-relative VSTR.
 636
 637 2013-04-08  Jan Beulich <jbeulich@suse.com>
 638
 639         * gas/config/tc-arm.c (reg_names): Convert duplicate SP_fiq
 640         entry to sp_fiq.
 641
 642 2013-04-03  Alan Modra  <amodra@gmail.com>
 643
 644         * doc/as.texinfo: Add support to generate man options for h8300.
 645         * doc/c-h8300.texi: Likewise.
 646
 647 2013-03-28  Ramana Radhakrishnan  <ramana.radhakrishnan@arm.com>
 648
 649         * config/tc-arm.c (arm_cpus): Add support for Cortex-A53 and
 650         Cortex-A57.
 651
 652 2013-03-27  Alexis Deruelle  <alexis.deruelle@gmail.com>
 653
 654         PR binutils/15068
 655         * config/tc-tic6x.c (tic6x_try_encode): Add use of bitfields array.
 656
 657 2013-03-26  Nick Clifton  <nickc@redhat.com>
 658
 659         PR gas/15295
 660         * listing.c (rebuffer_line): Rewrite to avoid seeking back to the
 661         start of the file each time.
 662
 663         PR gas/15178
 664         * config/tc-sparc.h (ELF_TARGET_FORMAT): Set to elf32-sparc for
 665         FreeBSD targets.
 666
 667 2013-03-26  Douglas B Rupp  <rupp@gnat.com>
 668
 669         * config/tc-ia64.c (emit_one_bundle): Move last_slot adjustment
 670         after fixup.
 671
 672 2013-03-21  Will Newton  <will.newton@linaro.org>
 673
 674         * config/tc-arm.c (encode_thumb32_addr_mode): Emit an error for all
 675         pc-relative str instructions in Thumb mode.
 676
 677 2013-03-21  Michael Schewe  <michael.schewe@gmx.net>
 678
 679         * config/tc-h8300.c (do_a_fix_imm): Add relaxation of mov
 680         @(disp:32,ERx) to mov @(disp:16,ERx) insns by new reloc
 681         R_H8_DISP32A16.
 682         * config/tc-h8300.h: Remove duplicated defines.
 683
 684 2013-03-21  Senthil Kumar Selvaraj  <senthil_kumar.selvaraj@atmel.com>
 685
 686         PR gas/15282
 687         * tc-avr.c (mcu_has_3_byte_pc): New function.
 688         (tc_cfi_frame_initial_instructions): Call it to find return
 689         address size.
 690
 691 2013-03-20  Alexis Deruelle  <alexis.deruelle@gmail.com>
 692
 693         PR gas/15095
 694         * config/tc-tic6x.c (tic6x_try_encode): Handle
 695         tic6x_coding_dreg_(msb|lsb) field coding types and use it to
 696         encode register pair numbers when required.
 697
 698 2013-03-15  Will Newton  <will.newton@linaro.org>
 699
 700         * config/tc-arm.c (do_neon_ldr_str): Fix error check for PC register
 701         in vstr in Thumb mode for pre-ARMv7 cores.
 702
 703 2013-03-14  Andreas Schwab  <schwab@suse.de>
 704
 705         * doc/c-arc.texi (ARC Directives): Revert last change and use
 706         @itemize instead of @table.
 707         * doc/c-arm.texi (ARM-Instruction-Set): Likewise.
 708
 709 2013-03-14  Nick Clifton  <nickc@redhat.com>
 710
 711         PR gas/15273
 712         * config/tc-arm.c (do_co_reg): Do not call check_obsolete with a
 713         NULL message, instead just check ARM_CPU_IS_ANY directly.
 714
 715 2013-03-14  Nick Clifton  <nickc@redhat.com>
 716
 717         PR gas/15212
 718         * doc/c-arc.texi (ARC Directives): Use @code instead of @bullet
 719         for table format.
 720         * doc/c-arm.texi (ARM-Instruction-Set): Likewise.  Also add text
 721         to the @item directives.
 722         (ARM-Neon-Alignment): Move to correct place in the document.
 723         * doc/c-cr16.texi (CR16 Operand Qualifiers): Fix up table
 724         formatting.
 725         * doc/c-tic54x.texi (TIC54X-Subsyms): Correct use of
 726         @smallexample.
 727
 728 2013-03-12  Sebastian Huber <sebastian.huber@embedded-brains.de>
 729
 730         * config/tc-nios2.c (nios2_consume_arg): Delete 'k' case.  Add 'o'
 731         case.  Add default BAD_CASE to switch.
 732
 733 2013-03-11  Sebastian Huber <sebastian.huber@embedded-brains.de>
 734
 735         * config/tc-nios2.c (nios2_assemble_args_ds): New function.
 736         (nios2_arg_info_structs): Add "d,s" and "d,s,E" entries.
 737
 738 2013-03-11  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>
 739
 740         * config/tc-arm.c (crc_ext_armv8): New feature set.
 741         (UNPRED_REG): New macro.
 742         (do_crc32_1): New function.
 743         (do_crc32b, do_crc32h, do_crc32w, do_crc32cb,
 744         do_crc32ch, do_crc32cw): Likewise.
 745         (TUEc): New macro.
 746         (insns): Add entries for crc32 mnemonics.
 747         (arm_extensions): Add entry for crc.
 748
 749 2013-03-08  Chung-Lin Tang  <cltang@codesourcery.com>
 750
 751         * write.h (struct fix): Add fx_dot_frag field.
 752         (dot_frag): Declare.
 753         * write.c (dot_frag): New variable.
 754         (fix_new_internal): Set fx_dot_frag field with dot_frag.
 755         (fixup_segment): Base calculation of fx_offset with fx_dot_frag.
 756         * expr.c (expr): Save value of frag_now in dot_frag when setting
 757         dot_value.
 758         * read.c (emit_expr): Likewise. Delete comments.
 759
 760 2013-03-07  H.J. Lu  <hongjiu.lu@intel.com>
 761
 762         * config/tc-i386.c (flag_code_names): Removed.
 763         (i386_index_check): Rewrote.
 764
 765 2013-03-05  Yufeng Zhang  <yufeng.zhang@arm.com>
 766
 767         * config/tc-aarch64.c (aarch64_imm_float_p): Rename 'e' to 'pattern';
 768         add comment.
 769         (aarch64_double_precision_fmovable): New function.
 770         (parse_aarch64_imm_float): Add parameter 'dp_p'; call the new
 771         function; handle hexadecimal representation of IEEE754 encoding.
 772         (parse_operands): Update the call to parse_aarch64_imm_float.
 773
 774 2013-02-28  H.J. Lu  <hongjiu.lu@intel.com>
 775
 776         * config/tc-i386.c (_i386_insn): Replace have_hle with hle_prefix.
 777         (check_hle): Updated.
 778         (md_assemble): Likewise.
 779         (parse_insn): Likewise.
 780
 781 2013-02-28  H.J. Lu  <hongjiu.lu@intel.com>
 782
 783         * config/tc-i386.c (_i386_insn): Add rep_prefix.
 784         (md_assemble): Check if REP prefix is OK.
 785         (parse_insn): Remove expecting_string_instruction.  Set
 786         i.rep_prefix.
 787
 788 2013-02-28  Yufeng Zhang  <yufeng.zhang@arm.com>
 789
 790         * config/tc-aarch64.c (aarch64_features): Add the 'crc' option.
 791
 792 2013-02-28  Yufeng Zhang  <yufeng.zhang@arm.com>
 793
 794         * config/tc-aarch64.c (parse_sys_reg): Allow the full range of CRn
 795         for system registers.
 796
 797 2013-02-27  DJ Delorie  <dj@redhat.com>
 798
 799         * config/tc-rl78.c (reloc_function): Add %code -> BFD_RELOC_RL78_CODE.
 800         (rl78_op): Handle %code().
 801         (rl78_cons_fix_new): Likewise, but ignore for 20-bit operands.
 802         (tc_gen_reloc): Likwise; convert to a computed reloc.
 803         (md_apply_fix): Likewise.
 804
 805 2013-02-25  Kaushik Phatak  <Kaushik.Phatak@kpitcummins.com>
 806
 807         * config/rl78-parse.y: Fix encoding of DIVWU insn.
 808
 809 2013-02-25  Terry Guo  <terry.guo@arm.com>
 810
 811         * config/tc-arm.c (arm_cpus): Add cortex-r7 entry.
 812         * doc/c-arm.texi: Add cortex-r7 and missing cortex-r5 to
 813         list of accepted CPUs.
 814
 815 2013-02-19  H.J. Lu  <hongjiu.lu@intel.com>
 816
 817         PR gas/15159
 818         * config/tc-i386.c (cpu_arch): Add ".smap".
 819
 820         * doc/c-i386.texi: Document smap.
 821
 822 2013-02-18  Maciej W. Rozycki  <macro@codesourcery.com>
 823
 824         * config/tc-mips.c (s_cpload): Call mips_mark_labels and set
 825         mips_assembling_insn appropriately.
 826         (s_cpsetup, s_cprestore, s_cpreturn, s_cpadd): Likewise.
 827
 828 2013-02-18  Maciej W. Rozycki  <macro@codesourcery.com>
 829
 830         * config/tc-mips.c (append_insn): Correct indentation, remove
 831         extraneous braces.
 832
 833 2013-02-15  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>
 834
 835         * config/tc-arm.c (do_neon_mov): Break on NS_NULL.
 836
 837 2013-02-15  Sebastian Huber  <sebastian.huber@embedded-brains.de>
 838
 839         * configure.tgt: Add nios2-*-rtems*.
 840
 841 2013-02-14  Yufeng Zhang  <yufeng.zhang@arm.com>
 842
 843         * config/tc-aarch64.c (md_begin): Change to check if 'name' is
 844         NULL.
 845
 846 2013-02-09  Jürgen Urban  <JuergenUrban@gmx.de>
 847
 848         * config/tc-mips.c (CPU_HAS_LDC1_SDC1): New macro.
 849         (macro): Use it.  Assert that trunc.w.s is not used for r5900.
 850
 851 2013-02-08  Yi-Hsiu, Hsu  <ahsu@marvell.com>
 852
 853         * gas/config/tc-arm.c (arm_cpus): Add support for mcpu=marvell-pj4
 854         core.
 855
 856 2013-02-06  Sandra Loosemore  <sandra@codesourcery.com>
 857             Andrew Jenner <andrew@codesourcery.com>
 858
 859         Based on patches from Altera Corporation.
 860
 861         * Makefile.am (TARGET_CPU_CFILES): Add config/tc-nios2.c.
 862         (TARGET_CPU_HFILES): Add config/tc-nios2.h.
 863         * Makefile.in: Regenerated.
 864         * configure.tgt: Add case for nios2*-linux*.
 865         * config/obj-elf.c: Conditionally include elf/nios2.h.
 866         * config/tc-nios2.c: New file.
 867         * config/tc-nios2.h: New file.
 868         * doc/Makefile.am (CPU_DOCS): Add c-nios2.texi.
 869         * doc/Makefile.in: Regenerated.
 870         * doc/all.texi: Set NIOSII.
 871         * doc/as.texinfo (Overview): Add Nios II options.
 872         (Machine Dependencies): Include c-nios2.texi.
 873         * doc/c-nios2.texi: New file.
 874         * NEWS: Note Altera Nios II support.
 875
 876 2013-02-06  Alan Modra  <amodra@gmail.com>
 877
 878         PR gas/14255
 879         * config/tc-avr.h (TC_VALIDATE_FIX): Mark symbol used by reloc.
 880         Don't skip fixups with fx_subsy non-NULL.
 881         * config/tc-avr.c (tc_gen_reloc): Don't specially handle fixups
 882         with fx_subsy non-NULL.
 883
 884 2013-02-04  H.J. Lu  <hongjiu.lu@intel.com>
 885
 886         * doc/c-metag.texi: Add "@c man" markers.
 887
 888 2013-02-04  Alan Modra  <amodra@gmail.com>
 889
 890         * write.c (fixup_segment): Return void.  Delete seg_reloc_count
 891         related code.
 892         (TC_ADJUST_RELOC_COUNT): Delete.
 893         * config/tc-i960.h (TC_ADJUST_RELOC_COUNT): Delete.
 894
 895 2013-02-04  Alan Modra  <amodra@gmail.com>
 896
 897         * po/POTFILES.in: Regenerate.
 898
 899 2013-01-30  Markos Chandras  <markos.chandras@imgtec.com>
 900
 901         * config/tc-metag.c: Make SWAP instruction less permissive with
 902         its operands.
 903
 904 2013-01-29  DJ Delorie  <dj@redhat.com>
 905
 906         * config/tc-rl78.c (rl78_cons_fix_new): Handle user-specified
 907         relocs in .word/.etc statements.
 908
 909 2013-01-29  Roland McGrath  <mcgrathr@google.com>
 910
 911         * config/tc-arm.c (md_apply_fix): Use as_bad_where for "bad
 912         immediate value for 8-bit offset" error so it shows line info.
 913
 914 2013-01-24  Joseph Myers  <joseph@codesourcery.com>
 915
 916         * config/tc-ppc.c (md_assemble): Do not generate APUinfo sections
 917         for 64-bit output.
 918
 919 2013-01-24  Nick Clifton  <nickc@redhat.com>
 920
 921         * config/tc-v850.c: Add support for e3v5 architecture.
 922         * doc/c-v850.texi: Mention new support.
 923
 924 2013-01-23  Nick Clifton  <nickc@redhat.com>
 925
 926         PR gas/15039
 927         * config/tc-avr.c: Include dwarf2dbg.h.
 928
 929 2013-01-18  H.J. Lu  <hongjiu.lu@intel.com>
 930
 931         * config/tc-i386.c (reloc): Support size relocation only for ELF.
 932         (tc_i386_fix_adjustable): Likewise.
 933         (lex_got): Likewise.
 934         (tc_gen_reloc): Likewise.
 935
 936 2013-01-17  Yufeng Zhang  <yufeng.zhang@arm.com>
 937
 938         * config/tc-aarch64.c (output_operand_error_record): Change to output
 939         the out-of-range error message as value-expected message if there is
 940         only one single value in the expected range.
 941         (programmer_friendly_fixup): Remove the handling of 8-bit MOVI with
 942         LSL #0 as a programmer-friendly feature.
 943
 944 2013-01-16  H.J. Lu  <hongjiu.lu@intel.com>
 945
 946         * config/tc-i386.c (reloc): Support BFD_RELOC_SIZE32.
 947         (tc_i386_fix_adjustable): Keep symbol for BFD_RELOC_32_SIZE and
 948         BFD_RELOC_64_SIZE relocations.
 949         (lex_got): Support "symbol@SIZE" and don't create GOT symbol
 950         for it.
 951         (tc_gen_reloc): Resolve BFD_RELOC_SIZE32 and BFD_RELOC_SIZE64
 952         relocations against local symbols.
 953
 954 2013-01-16  Alan Modra  <amodra@gmail.com>
 955
 956         * config/tc-ppc.c (md_assemble <TE_PE>): Ignore line after
 957         finding some sort of toc syntax error, and break to avoid
 958         compiler uninit warning.
 959
 960 2013-01-15  H.J. Lu  <hongjiu.lu@intel.com>
 961
 962         PR gas/15019
 963         * config/tc-i386.c (lex_got): Increment length by 1 if the
 964         relocation token is removed.
 965
 966 2013-01-15  Nick Clifton  <nickc@redhat.com>
 967
 968         * config/tc-v850.c (md_assemble): Allow signed values for
 969         V850E_IMMEDIATE.
 970
 971 2013-01-11  Sean Keys  <skeys@ipdatasys.com>
 972
 973         * config/tc-xgate.c (md_begin): Fix mistake made when going from
 974         git to cvs.
 975
 976 2013-01-10  Peter Bergner <bergner@vnet.ibm.com>
 977
 978         * doc/as.texinfo (Target PowerPC): Document -mpower8 and -mhtm.
 979         * doc/c-ppc.texi (PowerPC-Opts):  Likewise.
 980         * config/tc-ppc.c (md_show_usage): Likewise.
 981         (ppc_handle_align): Handle power8's group ending nop.
 982
 983 2013-01-10  Sean Keys  <skeys@ipdatasys.com>
 984
 985         * config/tc-xgate.c (md_begin): Fix the printing of opcodes so
 986         that the assember exits after the opcodes have been printed.
 987
 988 2013-01-10  H.J. Lu  <hongjiu.lu@intel.com>
 989
 990         * app.c: Remove trailing white spaces.
 991         * as.c: Likewise.
 992         * as.h: Likewise.
 993         * cond.c: Likewise.
 994         * dw2gencfi.c: Likewise.
 995         * dwarf2dbg.h: Likewise.
 996         * ecoff.c: Likewise.
 997         * input-file.c: Likewise.
 998         * itbl-lex.h: Likewise.
 999         * output-file.c: Likewise.
1000         * read.c: Likewise.
1001         * sb.c: Likewise.
1002         * subsegs.c: Likewise.
1003         * symbols.c: Likewise.
1004         * write.c: Likewise.
1005         * config/tc-i386.c: Likewise.
1006         * doc/Makefile.am: Likewise.
1007         * doc/Makefile.in: Likewise.
1008         * doc/c-aarch64.texi: Likewise.
1009         * doc/c-alpha.texi: Likewise.
1010         * doc/c-arc.texi: Likewise.
1011         * doc/c-arm.texi: Likewise.
1012         * doc/c-avr.texi: Likewise.
1013         * doc/c-bfin.texi: Likewise.
1014         * doc/c-cr16.texi: Likewise.
1015         * doc/c-d10v.texi: Likewise.
1016         * doc/c-d30v.texi: Likewise.
1017         * doc/c-h8300.texi: Likewise.
1018         * doc/c-hppa.texi: Likewise.
1019         * doc/c-i370.texi: Likewise.
1020         * doc/c-i386.texi: Likewise.
1021         * doc/c-i860.texi: Likewise.
1022         * doc/c-m32c.texi: Likewise.
1023         * doc/c-m32r.texi: Likewise.
1024         * doc/c-m68hc11.texi: Likewise.
1025         * doc/c-m68k.texi: Likewise.
1026         * doc/c-microblaze.texi: Likewise.
1027         * doc/c-mips.texi: Likewise.
1028         * doc/c-msp430.texi: Likewise.
1029         * doc/c-mt.texi: Likewise.
1030         * doc/c-s390.texi: Likewise.
1031         * doc/c-score.texi: Likewise.
1032         * doc/c-sh.texi: Likewise.
1033         * doc/c-sh64.texi: Likewise.
1034         * doc/c-tic54x.texi: Likewise.
1035         * doc/c-tic6x.texi: Likewise.
1036         * doc/c-v850.texi: Likewise.
1037         * doc/c-xc16x.texi: Likewise.
1038         * doc/c-xgate.texi: Likewise.
1039         * doc/c-xtensa.texi: Likewise.
1040         * doc/c-z80.texi: Likewise.
1041         * doc/internals.texi: Likewise.
1042
1043 2013-01-10  Roland McGrath  <mcgrathr@google.com>
1044
1045         * hash.c (hash_new_sized): Make it global.
1046         * hash.h: Declare it.
1047         * macro.c (define_macro): Use hash_new_sized instead of hash_new,
1048         pass a small size.
1049
1050 2013-01-10  Will Newton <will.newton@imgtec.com>
1051
1052         * Makefile.am: Add Meta.
1053         * Makefile.in: Regenerate.
1054         * config/tc-metag.c: New file.
1055         * config/tc-metag.h: New file.
1056         * configure.tgt: Add Meta.
1057         * doc/Makefile.am: Add Meta.
1058         * doc/Makefile.in: Regenerate.
1059         * doc/all.texi: Add Meta.
1060         * doc/as.texiinfo: Document Meta options.
1061         * doc/c-metag.texi: New file.
1062
1063 2013-01-09  Steve Ellcey  <sellcey@mips.com>
1064
1065         * config/tc-i386.c (md_begin): Remove 'internal Error' from as_fatal
1066         calls.
1067         * config/tc-mips.c (internalError): Remove, replace with abort.
1068
1069 2013-01-08  Yufeng Zhang  <yufeng.zhang@arm.com>
1070
1071         * config/tc-aarch64.c (parse_operands): Change to compare the result
1072         of function call 'parse_sys_reg' with 'PARSE_FAIL' instead of 'FALSE'.
1073
1074 2013-01-07  Nick Clifton  <nickc@redhat.com>
1075
1076         PR gas/14887
1077         * config/tc-arm.c (skip_past_char): Skip whitespace before the
1078         anticipated character.
1079         * config/tc-arm.c (parse_address_main): Delete skip of whitespace
1080         here as it is no longer needed.
1081
1082 2013-01-06  Andreas Schwab  <schwab@linux-m68k.org>
1083
1084         * doc/c-mips.texi (MIPS Opts): Fix use of @itemx.
1085         * doc/c-score.texi (SCORE-Opts): Likewise.
1086         * doc/c-tic54x.texi (TIC54X-Directives): Likewise.
1087
1088 2013-01-04  Juergen Urban <JuergenUrban@gmx.de>
1089
1090         * config/tc-mips.c: Add support for MIPS r5900.
1091         Add M_LQ_AB and M_SQ_AB to support large values for instructions
1092         lq and sq.
1093         (can_swap_branch_p, get_append_method): Detect some conditional
1094         short loops to fix a bug on the r5900 by NOP in the branch delay
1095         slot.
1096         (M_MUL): Support 3 operands in multu on r5900.
1097         (M_TRUNCWS): Support trunc.w.s on r5900 in MIPS ISA I.
1098         (s_mipsset): Force 32 bit floating point on r5900.
1099         (mips_ip): Check parameter range of instructions mfps and mtps on
1100         r5900.
1101         * configure.in: Detect CPU type when target string contains r5900
1102         (e.g. mips64r5900el-linux-gnu).
1103
1104 2013-01-02  H.J. Lu  <hongjiu.lu@intel.com>
1105
1106         * as.c (parse_args): Update copyright year to 2013.
1107
1108 2013-01-02  Yufeng Zhang  <yufeng.zhang@arm.com>
1109
1110         * config/tc-aarch64.c (aarch64_cpus): Add entries for "cortex-a53"
1111         and "cortex57".
1112
1113 2013-01-02  Nick Clifton  <nickc@redhat.com>
1114
1115         PR gas/14987
1116         * config/tc-arm.c (parse_address_main): Skip whitespace before a
1117         closing bracket.
1118
1119 For older changes see ChangeLog-2012
1120 \f
1121 Copyright (C) 2013 Free Software Foundation, Inc.
1122
1123 Copying and distribution of this file, with or without modification,
1124 are permitted in any medium without royalty provided the copyright
1125 notice and this notice are preserved.
1126
1127 Local Variables:
1128 mode: change-log
1129 left-margin: 8
1130 fill-column: 74
1131 version-control: never
1132 End: