1 2005-01-10 Inderpreet Singh <inderpreetb@noida.hcltech.com>
3 * tc-maxq.c: Replace constants 10 and 20 with bfd_mach_maxq10 and
5 (md_pseudo_table): Add new pseudo ops for maxq10 and maxq20.
6 (maxq_target): New function: Set the machine type.
8 2005-01-06 Paul Brook <paul@codesourcery.com>
10 * config/tc-arm.c (FPU_DEFAULT): Define for TE_VXWORKS.
11 (md_begin): Handle TE_VXWORKS for FP defaults.
12 (md_apply_fix3): Correct rela offsets.
13 (elf32_arm_target_format): Add VxWorks targets.
15 2005-01-06 Paul Brook <paul@codesourcery.com>
17 * configure.tgt: Set em=vxworks for *-*-vxworks.
18 * config/te-vxworks.h: New File.
20 2005-01-06 Paul Brook <paul@codesourcery.com>
22 * config/tc-arm.c (arm_cpus): Correct arch field for arm1026ej-s.
24 2005-01-04 Dmitry Diky <diwil@spec.ru>
26 * config/tc-msp430.c (md_apply_fix3): Fix offset calculation for
29 2005-01-03 David Mosberger <davidm@hpl.hp.com>
31 * config/tc-ia64.c (md): Add member "loc_directive_seen".
32 (dot_loc): New function.
33 (md_pseudo_table): Add entry to map .loc to dot_loc().
34 (emit_one_bundle): Only call dwarf2_gen_line_info() if we have
35 seen a .loc directive or we're generating DWARF2 debug info for
38 2004-12-29 Alan Modra <amodra@bigpond.net.au>
41 * read.c (s_comm_internal): Don't zero end of name until size
42 expression has been parsed.
44 2004-12-25 Marek Michalkiewicz <marekm@amelek.gda.pl>
46 * config/tc-avr.c (mcu_types): Move attiny{13,2313} from avr4 to avr2.
48 2004-12-23 Tomer Levi <Tomer.Levi@nsc.com>
50 * config/tc-crx.c: Support 'bcop' relaxation (dealt as in 'cmp&branch'
53 2004-12-22 Ian Lance Taylor <ian@airs.com>
56 * configure.in: Move setting of cpu_type, fmt, etc., to
58 * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add
59 $(srcdir)/configure.tgt.
60 * configure, Makefile.in: Rebuild.
62 2004-12-22 Klaus Rudolph <lts-rudolph@gmx.de>
64 * config/tc-avr.c: Add support for the new R_AVR_LDI, R_AVR_6 and
65 R_AVR_6_ADIW relocs for the LDI, ADIW/SBIW and LDD/STD
67 (avr_offset_expression): New function to parse offsets for LDI
69 (avr_operand): Use it.
70 (md_apply_fix3): Generate the relocs.
72 2004-12-16 Andrew Stubbs <andrew.stubbs@st.com>
74 * config/tc-sh64.c (shmedia_md_apply_fix3): Add missing
75 BFD_RELOC_SH_IMMS10BY8 relocation.
77 * config/tc-sh64.c (shmedia_build_Mytes): Emit an error message rather
78 than just ignoring bad code.
80 2004-12-16 Richard Sandiford <rsandifo@redhat.com>
82 * config/tc-v850.c (handle_lo16): New function.
83 (v850_reloc_prefix): Use it to check lo().
84 (md_assemble, md_apply_fix3): Handle BFD_RELOC_V850_LO16_SPLIT_OFFSET.
86 2004-12-14 P.J. Darcy <darcypj@us.ibm.com>
88 * configure.in: Add s390x-ibm-tpf support.
89 * configure: Regenerate.
91 2004-12-15 Jan Beulich <jbeulich@novell.com>
93 * config/obj-elf.c (obj_elf_change_section): Only set type and
94 attributes on new sections. Emit warning when type of re-declared
95 section doesn't match.
97 2004-12-15 Jan Beulich <jbeulich@novell.com>
99 * dw2gencfi.c (dot.cfi.startproc): Clear cur_cfa_offset so
100 '.cfi_startproc simple' doesn't inherit the old value.
102 2004-12-15 Jan Beulich <jbeulich@novell.com>
104 * dw2gencfi.c (output_cfi_insn): Adjust DW_CFA_def_cfa_sf generation
105 to emit a signed and factored offset. Adjust DW_CFA_def_cfa_offset_sf
106 generation to emit a factored offset.
108 2004-12-10 Ian Lance Taylor <ian@wasabisystems.com>
110 * config/tc-mips.c (macro) [M_LA_AB]: Give an error for a offset
111 which is too large in the case of NO_PIC without 64-bit
114 * config/tc-mips.c (mips_in_shared): New static variable.
115 (macro_build_lui): Permit "_gp" if !mips_in_shared.
116 (md_longopts): Add -mshared and -mno-shared.
117 (md_parse_option): Handle OPTION_MSHARED and OPTION_MNO_SHARED.
118 (s_cpload): Implement !mips_in_shared case.
119 (s_cpsetup): Likewise.
120 * doc/c-mips.texi (MIPS Opts): Document -mno-shared.
121 * NEWS: Mention -mno-shared.
123 2004-12-09 Paul Brook <paul@codesourcery.com>
125 * config/tc-arm.c (s_arm_unwind_fnend): Use R_ARM_PREL31 relocation
128 2004-12-09 Ian Lance Taylor <ian@wasabisystems.com>
130 * config/tc-mips.c (append_insn): If we emit a nop during a relax
131 sequence, increase the size of the sequence.
133 * config/tc-mips.c (mips_cpu_info_table): Change "9000" entry to
136 2004-12-07 Ben Elliston <bje@gnu.org>
138 * read.c (s_align): Use an align_limit temporary to allay a GCC
139 signed/unsigned comparison warning.
141 2004-12-01 Mark Mitchell <mark@codesourcery.com>
143 * Makefile.am (TARG_ENV_HFILES): Add te-armlinuxeabi.h.
144 * configure.in: Use it for arm*-*-linux-gnueabi*.
145 * config/tc-arm.c: Allow emulation file to set FPU_DEFAULT.
146 * config/te-armlinuxeabi.h: New file.
147 * Makefile.in: Regenerated.
148 * aclocal.m4: Likewise.
149 * configure: Likewise.
150 * doc/Makefile.in: Regenerated.
152 2004-12-02 Bob Wilson <bob.wilson@acm.org>
154 * config/tc-xtensa.c (xtensa_switch_section_emit_state): Use subseg_set.
155 (xtensa_restore_emit_state): Likewise.
157 2004-12-02 Alan Modra <amodra@bigpond.net.au>
159 * read.c (ALIGN_LIMIT): Define, increasing limit for BFD_ASSEMBLER.
162 2004-11-30 Tero Niemela <tero_niemela@yahoo.com>
164 * Makefile.am: Change LOCALEDIR to $(datadir)/share.
165 * Makefile.in: Regenerate.
167 2004-11-29 Tomer Levi <Tomer.Levi@nsc.com>
169 * config/tc-crx.c: Major code cleanup. Remove unused variables and
170 functions, give functions a meaningful name, add comments.
171 (check_range): New function - Replace operand size calculation
173 (assemble_insn): Update Algorithm, improve error issuing.
175 (process_label_constant): Bug fix regarding COP_BRANCH_INS relocation
178 2004-11-29 Kazuhiro Inaoka <inaoka.kazuhiro@renesas.com>
180 * config/tc-m32r.c (md_pcrel_from_section): Fixed a pcrel relocte
181 miss between different section in the same module.
182 (tc_gen_reloc): Likewise.
184 2004-11-25 Theodore A. Roth <troth@openavr.org>
186 * gas/config/tc-avr.c (mcu_types): Add support for atmega165,
187 atmega325, atmega3250, atmega645 and atmega6450.
189 2004-11-25 Jan Beulich <jbeulich@novell.com>
191 * config/tc-i386.c (optimize_imm): Adjust immediates to only those
192 permissible for the selected instruction suffix.
193 (process_suffix): For DefaultSize instructions, suppressing the
194 guessing of a 'q' suffix if the instruction doesn't support it is
195 pointless, because only an 'l' suffix can be guessed in this place.
197 2004-11-24 Nick Clifton <nickc@redhat.com>
199 * config/tc-iq2000.c: Remove support for IQ10 processor.
200 Convert to ISO C90 formatting.
201 * config/tc-iq2000.h: Likewise.
203 2004-11-23 Nick Clifton <nickc@redhat.com>
205 * config/tc-mn10300.c (md_relax_table): More fixes to the offsets
206 in this table. They should be correct now.
208 2004-11-23 Jan Beulich <jbeulich@novell.com>
210 * config/tc-i386.h (CpuMMX2): Declare. Artificial classifier to
211 indicate the MMX extensions added by both SSE and 3DNow!A.
212 (Cpu3dnowA): Declare.
213 (CpuUnknownFlags): Update.
214 * config/tc-i386.c (cpu_sub_arch_name): Declare.
215 (cpu_arch): i586 and pentium do not imply MMX. i686 and pentiumpro do
216 neither imply SSE nor MMX. k6 implies MMX. k6_2 additionally implies
217 3DNow!. Athlon additionally implies 3DNow!A. Several new
218 entries (those starting with a dot are for sub-arch specification).
219 (set_cpu_arch): Handle sub-arch specifications.
220 (parse_insn): Distinguish between instructions not supported because
221 of insufficient CPU features and because of 64-bit mode.
222 * doc/c-i386.texi: Describe enhanced .arch directive.
224 2004-11-22 Bob Wilson <bob.wilson@acm.org>
226 * config/tc-xtensa.c (xg_add_opcode_fix): Set fx_no_overflow.
228 2004-11-22 Bob Wilson <bob.wilson@acm.org>
230 * dwarf2dbg.c (dwarf2_finish): Don't write a .debug_line section
231 without a corresponding .debug_info section.
233 2004-11-22 Hans-Peter Nilsson <hp@axis.com>
235 * read.c (potable): Add "error" and "warning".
236 (s_errwarn): New function.
237 * read.h (s_errwarn): Declare.
238 * doc/as.texinfo (Error, Warning): Document .error and .warning.
240 2004-11-22 Nick Clifton <nickc@redhat.com>
242 * config/tc-tic54x.c (tic54x_adjust_symtab): Adjust call to
245 2004-11-19 Alan Modra <amodra@bigpond.net.au>
247 * config/tc-msp430.c (struct rcodes_s, MSP430_RLC, msp430_rcodes,
248 struct hcodes_s, msp430_hcodes): From include/opcode/msp430.h.
250 2004-11-19 Alan Modra <amodra@bigpond.net.au>
252 * config/obj-coff.c (c_dot_file_symbol): Add "app" param.
253 (coff_adjust_symtab): Adjust call.
254 (crawl_symbols): Likewise.
255 * config/obj-coff.h (c_dot_file_symbol): Add "app" param.
256 (obj_app_file): Adjust.
258 2004-11-18 Inderpreet Singh <inderpreetb@nioda.hcltech.com>
260 * configure.in: Enable bfd_assember for the MAXQ port.
261 * configure: Regenerate.
263 2004-11-12 Bob Wilson <bob.wilson@acm.org>
264 Sterling Augustine <sterling@tensilica.com>
266 * config/tc-xtensa.c (finish_vinsn): Clear pending instruction if
268 (check_t1_t2_reads_and_writes): Check for both reads and writes to
269 interfaces that are related as determined by xtensa_interface_class_id.
271 2004-11-12 Nick Clifton <nickc@redhat.com>
273 * config/tc-mn10300.c (md_relax_table): Fix off by one negative
274 offsets for conditional branches.
276 2004-11-11 Bob Wilson <bob.wilson@acm.org>
278 * config/tc-xtensa.c (MAX_IMMED6): Change value to 65.
280 2004-11-10 Bob Wilson <bob.wilson@acm.org>
282 * config/tc-xtensa.c (update_next_frag_state): Always add a NOP if
283 relaxing at the end of a loop. Don't mark frags as UNREACHABLE or
285 (relax_frag_immed): Update call to update_next_frag_state.
287 2004-11-10 Alan Modra <amodra@bigpond.net.au>
289 * obj.h (struct format_ops <app_file>): Add int param.
290 * read.h (s_app_file_string): Likewise.
291 * read.c (s_app_file_string): Likewise.
292 (s_app_file): Adjust s_app_file_string call.
293 * config/tc-mips.c (s_mips_file): Likewise.
294 * config/obj-coff.h (obj_app_file): Add app param.
295 * config/obj-ecoff.h (obj_app_file): Likewise.
296 * config/obj-multi.h (obj_app_file): Likewise.
297 * config/obj-elf.h (elf_file_symbol): Likewise.
298 * config/obj-elf.c (elf_file_symbol): Only emit one file symbol
299 if called for # preprocessor lines.
301 2004-11-08 H.J. Lu <hongjiu.lu@intel.com>
304 * symbols.c (resolve_symbol_value): Convert weak symbols only
306 (symbol_equated_reloc_p): Don't equate weaks when relocating
307 only for Windows PECOFF.
309 2004-11-08 Tomer Levi <Tomer.Levi@nsc.com>
311 * config/tc-crx.c (print_insn): Check and set insn_addr.
312 * config/tc-crx.h (md_frag_check): Define.
314 2004-11-08 Inderpreet Singh <inderpreetb@nioda.hcltech.com>
315 Vineet Sharma <vineets@noida.hcltech.com>
317 * configure.in: Add support for new target maxq-coff.
318 * configure: Regenerate.
319 * NEWS: Mention new support.
320 * config/tc-maxq.c: New file.
321 * config/tc-maxq.h: New file.
322 * config/obj-coff.h: Add support for maxq-coff.
324 2004-11-08 Aaron W. LaFramboise <aaron98wiridge9@aaronwl.com>
326 * symbols.c (any_external_name): Define.
327 (resolve_symbol_value): Convert weak symbols.
328 (S_SET_EXTERNAL): Support any_external_name.
329 (S_SET_NAME): Qualify parameter const.
330 (symbol_equated_reloc_p): Equate to weaks when relocating.
331 * symbols.h (S_SET_NAME): Qualfiy parameter const.
332 * tc.h (any_external_name): Declare.
333 * config/obj-coff.c ("coff/pe.h"): Include for BFD
335 (weak_is_altname): Declare and define.
336 (weak_name2altname): Same.
337 (weak_altname2name): Same.
338 (weak_uniquify): Same.
339 (weak_altprefix): Define.
340 (obj_coff_weak): Change .weak syntax and handling.
341 (coff_frob_symbol): Fix PE weak symbol alternates.
342 * config/obj-coff.h (USE_UNIQUE): Define.
343 * config/tc-i386.c (md_apply_fix3): Assume weak symbols
344 are in another segment.
345 (tc_gen_reloc): Remove broken addend hack.
346 doc/as.texinfo: Update.
348 2004-11-05 Sterling Augustine <sterling@tensilica.com>
350 * config/tc-xtensa.c (total_frag_text_expansion): New.
351 (md_estimate_size_before_relax): Use it.
352 (find_address_of_next_align_frag): Likewise.
354 2004-11-05 Tomer Levi <Tomer.Levi@nsc.com>
356 * config/tc-crx.c: Rename argument types.
357 (processing_arg_number): Rename to 'cur_arg_num'.
358 (get_number_of_bits): Rename to 'set_operand_size'.
359 (get_operandtype): Rename to 'parse_operand', totally rewrite.
360 (set_cons_rparams): Rename to 'set_operand', totally rewrite.
361 (set_indexmode_parameters): Remove function, integrate its code into
363 (set_operand_size): Get rid of 'Operand Number' function parameter -
364 use global variable 'cur_arg_num' instead.
365 Use a local 'argument' pointer to reference the current argument.
366 (parse_operand): Likewise.
367 (set_operand): Likewise.
368 (process_label_constant): Likewise.
370 2004-11-04 Bob Wilson <bob.wilson@acm.org>
372 * config/tc-xtensa.c: Remove XTENSA_SECTION_RENAME ifdefs.
373 (add_section_rename): Delete. Inlined into...
374 (build_section_rename): ...here. Use xstrdup instead of strdup.
375 (xtensa_section_rename): Drop "const" from argument and return types.
376 (md_show_usage): Indent to match show_usage().
377 * config/tc-xtensa.h: Remove XTENSA_SECTION_RENAME ifdefs.
378 (tc_canonicalize_section_name): Define.
379 (md_elf_section_rename): Remove unused macro.
380 * doc/as.texinfo (Overview): Document Xtensa --rename-section option.
381 * doc/c-xtensa.texi (Xtensa Options): Likewise.
382 (Frame Directive): Delete.
384 2004-11-04 Daniel Jacobowitz <dan@debian.org>
386 * configure.in: Remove arm-*-oabi and thumb-*-oabi.
387 * config/tc-arm.c (target_oabi): Delete.
388 (md_apply_fix3, elf32_arm_target_format): Remove target_oabi checks.
389 (arm_opts): Remove moabi.
390 * doc/as.texinfo (Overview): Remove documentation of -moabi.
391 * doc/c-arm.texi (ARM Options): Likewise.
392 * configure: Regenerated.
394 2004-11-04 Hans-Peter Nilsson <hp@axis.com>
396 * configure.in (crisv32): Recognize. AC_DEFINE_UNQUOTED
397 DEFAULT_CRIS_ARCH. Handle crisv32-*-linux-gnu* like
398 cris-*-linux-gnu* and crisv32-*-* like cris-*-*.
399 * configure: Regenerate.
400 * config/tc-cris.c (enum cris_archs): New.
401 (cris_mach, cris_arch_from_string, s_cris_arch, get_sup_reg)
402 (cris_insn_ver_valid_for_arch): New functions.
403 (DEFAULT_CRIS_ARCH): New macro, default to cris_any_v0_v10.
404 (cris_arch): New variable.
405 (md_pseudo_table): New pseudo .arch.
406 (err_for_dangerous_mul_placement): Initialize according to
408 (STATE_COND_BRANCH): Renamed from STATE_CONDITIONAL_BRANCH.
410 (STATE_COND_BRANCH_V32, STATE_COND_BRANCH_COMMON)
411 (STATE_ABS_BRANCH_V32, STATE_LAPC, BRANCH_BF_V32, BRANCH_BB_V32)
412 (BRANCH_WF_V32, BRANCH_WB_V32): New.
413 (BRANCH_BF, BRANCH_BB, BRANCH_WF, BRANCH_WB): Don't undef after
414 use in md_cris_relax_table.
415 (md_cris_relax_table): Add entries for STATE_COND_BRANCH_V32,
416 STATE_COND_BRANCH_COMMON, STATE_ABS_BRANCH_V32, STATE_LAPC.
417 Update and improve head comment.
418 (OPTION_PIC): Define in terms of previous option, OPTION_US.
419 (OPTION_MULBUG_ABORT_ON, OPTION_MULBUG_ABORT_OFF): Similar.
421 (md_longopts): New option --march=...
422 (cris_any_v0_v10_long_jump_size, crisv32_long_jump_size): New
424 (md_long_jump_size): Initialize in terms of DEFAULT_CRIS_ARCH.
425 (HANDLE_RELAXABLE): New macro.
426 (md_estimate_size_before_relax): Use HANDLE_RELAXABLE for common
427 cases. Check for weak symbols and assume not relaxable. Handle
428 STATE_COND_BRANCH_V32, STATE_COND_BRANCH_COMMON,
429 STATE_ABS_BRANCH_V32, STATE_LAPC. Use new variable symbolP, not
431 (md_convert_frag): Handle STATE_COND_BRANCH_V32,
432 STATE_COND_BRANCH_COMMON, STATE_ABS_BRANCH_V32, STATE_LAPC.
433 (cris_create_short_jump): Adjust for CRISv32.
434 (cris_relax_frag): Handle new states.
435 (md_create_long_jump): Ditto. Emit error for common_v10_v32.
436 (md_begin): Define symbols "..asm.arch.cris.v32",
437 "..asm.arch.cris.v10", "..asm.arch.cris.common_v10_v32" and
438 "..asm.arch.cris.any_v0_v10". Use cris_insn_ver_valid_for_arch
439 when entering opcode table entry points.
440 (md_assemble): Adjust branch handling for CRISv32. Handle LAPC
441 relaxation. In fix_new_exp call for main insn, pass 1 for pcrel
442 parameter for 8, 16 and 32-bit pc-relative insns and LAPC.
443 (cris_process_instruction): Initialize out_insnp->insn_type to
444 CRIS_INSN_NONE, not CRIS_INSN_NORMAL.
445 <case ']', '[', 'A', 'd', 'Q', 'N', 'n', 'Y', 'U', 'u', 'T'>: New
447 <case 'm'>: Check that modified_char == '.'.
448 <invalid operands>: Consume the rest of the line.
449 When operands don't match, skip over subsequent insns with
450 non-matching version specifier but same mnemonic.
451 <immediate constant, case SIZE_SPEC_REG>: Immediate operands for
452 special registers in CRISv32 are always 32 bit long.
453 <immediate constant, case SIZE_FIELD_SIGNED, SIZE_FIELD_UNSIGNED>:
455 (get_gen_reg): Only recognize "PC" when followed by "+]" for v32
456 and compatible. Recognize "ACR" for v32, unless followed by "+".
457 (get_spec_reg): Consider cris_arch when looking up register.
458 (get_autoinc_prefix_or_indir_op): Don't recognize assignment for
460 (get_3op_or_dip_prefix_op): Check for ']' after seeing '[rN+'.
461 (cris_get_expression): Restore input_line_pointer if failing "early".
462 (get_flags): Consider cris_arch and recognize flags accordingly.
463 (branch_disp): Adjust for CRISv32.
464 (gen_cond_branch_32): Similar. Emit error for common_v10_v32.
465 (cris_number_to_imm): Use as_bad_where, not as_bad. Remove
466 related FIXME. Don't insist on BFD_RELOC_32_PCREL fixup to be
467 resolved. Don't enter zeros in object file for
469 <case BFD_RELOC_CRIS_LAPCQ_OFFSET, BFD_RELOC_CRIS_SIGNED_16>
470 <case BFD_RELOC_CRIS_SIGNED_8>: New case.
471 (md_parse_option): Break out "return 1".
472 <OPTION_ARCH> New case.
473 (tc_gen_reloc): <case BFD_RELOC_CRIS_LAPCQ_OFFSET>
474 <case BFD_RELOC_CRIS_SIGNED_16, BFD_RELOC_CRIS_SIGNED_8>
475 <case BFD_RELOC_CRIS_UNSIGNED_8, BFD_RELOC_CRIS_UNSIGNED_16>
476 <case BFD_RELOC_32_PCREL>: New cases.
477 Addends for non-zero fx_pcrel are too in fx_offset.
478 (md_show_usage): Show --march=<arch>.
479 (md_apply_fix3): Adjust val for BFD_RELOC_CRIS_LAPCQ_OFFSET.
480 (md_pcrel_from): BFD_RELOC_CRIS_LAPCQ_OFFSET is PC-relative too.
481 (s_syntax) <struct syntaxes>: Properly constify member operand.
482 * config/tc-cris.h (TARGET_MACH): Define.
483 (cris_mach): Declare.
484 * doc/as.texinfo (Overview) <CRIS>: Add --march=...
485 * doc/c-cris.texi (CRIS-Symbols): New node for built-in symbols.
486 (CRIS-Opts): Document --march=...
487 (CRIS-Pseudos): Document .arch.
489 2004-11-04 Jan Beulich <jbeulich@novell.com>
491 * config/tc-i386.c (set_intel_syntax): Allow % in symbol names when
492 intel syntax and no register prefix, allow $ in symbol names when
494 (set_16bit_gcc_code_flag): Replace literal 'l' by LONG_MNEM_SUFFIX.
495 (intel_float_operand): Add fourth return value indicating math control
496 operations. Make classification more precise.
497 (md_assemble): Complain if memory operand of mov[sz]x has no size
499 (parse_insn): Translate word operands to floating point instructions
500 operating on integers as well as control instructions to short ones
501 as expected by AT&T syntax. Translate 'd' suffix to short one only for
502 floating point instructions operating on non-integer operands.
503 (match_template): Remove fldcw special case. Adjust q-suffix handling
504 to permit it on fild/fistp/fisttp in AT&T mode.
505 (process_suffix): Don't guess DefaultSize insns' suffix from
506 stackop_size for certain floating point control instructions. Guess
507 suffix for branch and [ls][gi]dt based on flag_code. Split error
508 messages for Intel and AT&T syntax, and make the condition more strict
509 for the former. Adjust suppressing of generation of operand size
511 (intel parser): Allow the full set of MASM operators. Add FWORD, TBYTE,
512 OWORD, and XMMWORD operand size specifiers (TBYTE replaces XWORD). Add
514 * config/tc-i386.h (BYTE_PTR WORD_PTR DWORD_PTR QWORD_PTR XWORD_PTR
515 SHORT OFFSET_FLAT FLAT NONE_FOUND): Remove unused defines.
517 2004-11-03 Hans-Peter Nilsson <hp@axis.com>
519 * symbols.c (colon) [!WORKING_DOT_WORD]: Don't declare
520 md_short_jump_size, md_long_jump_size.
521 * write.c [!WORKING_DOT_WORD]: Ditto.
522 * tc.h [!WORKING_DOT_WORD]: Declare them here. Drop const
524 * config/tc-cris.h (md_short_jump_size, md_long_jump_size): Don't
526 * config/tc-cris.c (md_short_jump_size, md_long_jump_size): Drop
527 const qualifier in these definitions.
528 * config/tc-i370.c, config/tc-m68k.c, config/tc-pdp11.c,
529 config/tc-s390.c, config/tc-tahoe.c, config/tc-vax.c: Ditto.
531 2004-11-02 Nick Clifton <nickc@redhat.com>
533 * dwarf2dbg.c (dwarf2_finish): Check for the existence of a file
534 table before deciding to produce a .debug_line section to match up
535 with a user provided .debug_info section.
537 2004-10-28 Tomer Levi <Tomer.Levi@nsc.com>
539 * config/tc-crx.c (getreg_image): Bug fix, a return value was
540 mistakenly omitted from CRX_C_REGTYPE and CRX_CS_REGTYPE cases.
542 2004-10-27 Tomer Levi <Tomer.Levi@nsc.com>
544 * config/tc-crx.c: Remove global variable 'post_inc_mode'.
545 (get_flags): New function.
546 (get_number_of_bits): Edit comments, update numeric values to
548 (process_label_constant): Don't support the colon
549 format (SYMBOL:[s|m|l]).
550 (set_cons_rparams): Support argument type 'arg_rbase'.
551 (get_operandtype): Bug fix in 'rbase' operand type parsing.
552 (handle_LoadStor): Bug fix, first handle post-increment mode.
553 (getreg_image): Remove redundant code, update according to latest
555 (print_constant): Bug fix relate to 3-word instructions.
556 (assemble_insn): Bug fix, when matching instructions, verify also
557 instruction type (not only mnemonic).
558 Add various error checking.
559 (preprocess_reglist): Support HI/LO and user registers.
561 2004-10-25 David Mosberger-Tang <davidm@hpl.hp.com>
563 * config/tc-ia64.c (fixup_unw_records): Don't let the "t" value
564 in an epilogue directive go negative.
566 2004-10-25 H.J. Lu <hongjiu.lu@intel.com>
569 * config/tc-ia64.c (emit_one_bundle): Decrement md.num_slots_in_use
570 after reporting template error during manual bundling. Reported
571 by Michael Dupont, michaelx.dupont@intel.com.
573 2004-10-25 Daniel Jacobowitz <dan@debian.org>
575 * Makefile.am: Run dep-am.
576 * aclocal.m4: Regenerate with automake 1.9.2.
577 * Makefile.in: Regenerate with automake 1.9.2.
578 * doc/Makefile.in: Likewise.
580 * config/tc-arm.c: Include "dw2gencfi.h".
581 (tc_arm_regname_to_dw2regnum, tc_arm_frame_initial_instructions):
583 * config/tc-arm.h (TARGET_USE_CFIPOP, DWARF2_DEFAULT_RETURN_COLUMN)
584 (DWARF2_CIE_DATA_ALIGNMENT, tc_regname_to_dw2regnum)
585 (tc_cfi_frame_initial_instructions): Define.
586 (tc_arm_regname_to_dw2regnum, tc_arm_frame_initial_instructions):
589 2004-10-21 Tomer Levi <Tomer.Levi@nsc.com>
591 * config/tc-crx.c (assemble_insn): Check unsigned immediate
593 Update coprocessor id to be unsigned immediate.
595 2004-10-18 Aaron W. LaFramboise <aaron98wiridge9@aaronwl.com>
597 * config/tc-i386.c (O_secrel): Delete.
598 (tc_pe_dwarf2_emit_offset): New function.
599 * config/tc-i386.h (O_secrel): Define as O_md1.
600 (TC_DWARF2_EMIT_OFFSET): Define.
602 2004-10-18 Nick Clifton <nickc@redhat.com>
604 * config/tc-xstormy16.c (xstormy16_cons_fix_new): Accept and
605 ignore @fptr() directives for 4-byte fixups.
607 2004-10-15 Alan Modra <amodra@bigpond.net.au>
609 * Makefile.am: Run "make dep-am"
610 * Makefile.in: Regenerate.
612 2004-10-14 Bob Wilson <bob.wilson@acm.org>
614 * doc/c-xtensa.texi (Xtensa Options, Absolute Literals Directive):
615 Remove comments about placement of literal pools.
616 (Literal Directive): Update description of literal placement.
617 (Literal Prefix Directive): Remove statement that this does not apply
618 to absolute-mode literals. Describe new section naming scheme.
620 2004-10-12 Bob Wilson <bob.wilson@acm.org>
622 * config/tc-xtensa.c (xtensa_frequency_pseudo): Use set_subseg_freq.
623 (is_entry_opcode, is_movi_opcode, is_the_loop_opcode, is_jx_opcode,
624 is_windowed_return_opcode): Delete.
625 (xtensa_frob_label): Use get_subseg_target_freq.
626 (md_assemble): Inline call to is_entry_opcode.
627 (xtensa_handle_align): Inline call to get_frag_is_literal.
628 (relaxation_requirements): Inline call to is_jx_opcode.
629 (emit_single_op): Inline call to is_movi_opcode.
630 (xg_assemble_vliw_tokens): Inline calls to get_frag_is_insn,
631 get_frag_is_no_transform, is_entry_opcode, and
632 set_frag_is_specific_opcode. Use get_subseg_total_freq.
633 (xtensa_fix_a0_b_retw_frags, xtensa_fix_b_j_loop_end_frags,
634 xtensa_fix_close_loop_end_frags, relax_frag_immed, convert_frag_immed):
635 Inline calls to get_frag_is_no_transform.
636 (next_instrs_are_b_retw): Inline call to is_windowed_return_opcode.
637 (xtensa_fix_short_loop_frags): Inline calls to is_the_loop_opcode and
638 get_frag_is_no_transform.
639 (convert_frag_immed_finish_loop): Inline calls to get_expression_value
640 and set_frag_is_no_transform.
641 (get_expression_value): Delete.
642 (subseg_map struct): Rename cur_total_freq to total_freq. Rename
643 cur_target_freq to target_freq.
644 (get_subseg_info): Split out code to create a new map entry into ...
645 (add_subseg_info): ... this new function.
646 (get_last_insn_flags): Check if get_subseg_info succeeded.
647 (set_last_insn_flags): Call add_subseg_info if needed.
648 (get_subseg_total_freq, get_subseg_target_freq, set_subseg_freq): New.
649 (xtensa_reorder_segments): Compute last_sec while counting sections.
650 Remove call to get_last_sec.
651 (get_last_sec): Delete.
652 (cache_literal_section): Inline call to retrieve_literal_seg and its
653 callees, seg_present and add_seg_list.
654 (retrieve_literal_seg, seg_present, add_seg_list): Delete.
655 (get_frag_is_insn, get_frag_is_no_transform,
656 set_frag_is_specific_opcode, set_frag_is_no_transform): Delete.
657 * config/tc-xtensa.h (MAX_SLOTS): Reduce from 31 to 15.
659 2004-10-12 Bob Wilson <bob.wilson@acm.org>
661 * config/tc-xtensa.c: Use ISO C90 formatting.
662 * config/tc-xtensa.h: Likewise.
663 * config/xtensa-istack.h: Likewise.
664 * config/xtensa-relax.c: Likewise.
665 * config/xtensa-relax.h: Likewise.
667 2004-10-12 Paul Brook <paul@codesourcery.com>
669 * config/tc-arm.c (md_begin): Change EF_ARM_EABI_VER3 to
672 * doc/c-arm.texi: Document that we actually support -meabi=4, not
675 2004-10-08 Bob Wilson <bob.wilson@acm.org>
677 * doc/as.texinfo (VTableEntry, VTableInherit): Add "directive" to index
679 (Acknowledgements): Use "GAS" instead of AS variable.
681 2004-10-08 Daniel Jacobowitz <dan@debian.org>
683 * config/tc-i386.c: Include "elf/x86-64.h".
684 (i386_elf_section_type): New function.
685 * config/tc-i386.h (md_elf_section_type): Define.
686 (i386_elf_section_type): New prototype.
688 2004-10-08 Linus Nielsen Feltzing <linus@haxx.se>
690 * config/m68k-parse.h (enum m68k_register): New control register,
692 * config/tc-m68k.c: Correct control register set for MCF5249.
694 2004-10-07 Bob Wilson <bob.wilson@acm.org>
695 Sterling Augustine <sterling@tensilica.com>
697 * config/tc-xtensa.c (absolute_literals_supported): New global flag.
698 (UNREACHABLE_MAX_WIDTH): Define.
699 (XTENSA_FETCH_WIDTH): Delete.
700 (cur_vinsn, xtensa_fetch_width, xt_saved_debug_type, past_xtensa_end,
701 prefer_const16, prefer_l32r): New global variables.
702 (LIT4_SECTION_NAME): Define.
703 (lit4_state struct): Add lit4_seg_name and lit4_seg fields.
704 (XTENSA_PROP_*, GET_XTENSA_PROP_*, SET_XTENSA_PROP_*): Define.
705 (frag_flags struct): New.
706 (xtensa_block_info struct): Move from tc-xtensa.h. Add flags field.
707 (subseg_map struct): Add cur_total_freq and cur_target_freq fields.
708 (bitfield, bit_is_set, set_bit, clear_bit): Define.
709 (MAX_FORMATS): Define.
710 (op_placement_info struct, op_placement_table): New.
711 (O_pltrel, O_hi16, O_lo16): Define.
712 (directiveE enum): Rename directive_generics to directive_transform.
713 Delete directive_relax. Add directive_schedule,
714 directive_absolute_literals, and directive_last_directive.
715 (directive_info): Rename "generics" to "transform". Delete "relax".
716 Add "schedule" and "absolute-literals".
717 (directive_state): Adjust entries to match changes in directive_info.
718 (xtensa_relax_statesE, RELAX_IMMED_MAXSTEPS): Move to tc-xtensa.h.
719 (xtensa_const16_opcode, xtensa_movi_opcode, xtensa_movi_n_opcode,
720 xtensa_l32r_opcode, xtensa_nop_opcode, xtensa_rsr_lcount_opcode): New.
721 (xtensa_j_opcode, xtensa_rsr_opcode): Delete.
722 (align_only_targets, software_a0_b_retw_interlock,
723 software_avoid_b_j_loop_end, maybe_has_b_j_loop_end,
724 software_avoid_short_loop, software_avoid_close_loop_end,
725 software_avoid_all_short_loops, specific_opcode): Delete.
726 (warn_unaligned_branch_targets): New.
727 (workaround_a0_b_retw, workaround_b_j_loop_end, workaround_short_loop,
728 workaround_close_loop_end, workaround_all_short_loops): Default FALSE.
729 (option_[no_]link_relax, option_[no_]transform,
730 option_[no_]absolute_literals, option_warn_unaligned_targets,
731 option_prefer_l32r, option_prefer_const16, option_target_hardware):
733 (option_[no_]align_only_targets, option_literal_section_name,
734 option_text_section_name, option_data_section_name,
735 option_bss_section_name, option_eb, option_el): Delete.
736 (md_longopts): Add entries for: [no-]transform, [no-]absolute-literals,
737 warn-unaligned-targets, prefer-l32r, prefer-const16, [no-]link-relax,
738 and target-hardware. Delete entries for [no-]target-align-only,
739 literal-section-name, text-section-name, data-section-name, and
741 (md_parse_option): Handle new options and remove old ones. Accept but
742 ignore [no-]density options. Warn for [no-]generics and [no-]relax
743 and treat them as [no-]transform.
744 (md_show_usage): Add new options and remove old ones.
745 (xtensa_setup_hw_workarounds): New.
746 (md_pseudo_table): Change "word" entry to use xtensa_elf_cons. Add
747 "long", "short", "loc" and "frequency" entries.
748 (use_generics): Rename to ...
749 (use_transform): ... this function. Add past_xtensa_end check.
750 (use_longcalls): Add past_xtensa_end check.
751 (code_density_available, can_relax): Delete.
752 (do_align_targets): New.
753 (get_directive): Accept dashes in directive names. Warn about
754 [no-]generics and [no-]relax directives and treat them as
756 (xtensa_begin_directive): Call md_flush_pending_output only for some
757 directives. Check for directives inside instruction bundles. Warn
758 about deprecated ".begin literal" usage. Warn and ignore [no-]density
759 directives. Handle new directives. Check generating_literals flag
761 (xtensa_end_directive): Check for directives inside instruction
762 bundles. Warn and ignore [no-]density directives. Handle new
763 directives. Call xtensa_set_frag_assembly_state.
764 (xtensa_loc_directive_seen, xtensa_dwarf2_directive_loc,
765 xtensa_dwarf2_emit_insn): New.
766 (xtensa_literal_position): Call md_flush_pending_output. Do not check
767 use_literal_section flag.
768 (xtensa_literal_pseudo): Call md_flush_pending_output. Handle absolute
769 literals. Use xtensa_elf_cons to parse the expression.
770 (xtensa_literal_prefix): Do not check use_literal_section. Support
771 ".lit4" sections for absolute literals. Change prefix convention to
772 replace ".text" (or ".t" in a linkonce section). No need to call
774 (xtensa_frequency_pseudo, xtensa_elf_cons, xtensa_elf_suffix): New.
775 (expression_end): Handle closing braces and colons.
776 (PLT_SUFFIX, plt_suffix): Delete.
777 (expression_maybe_register): Use new xtensa-isa.h functions. Use
778 xtensa_elf_suffix instead of checking for plt suffix, and handle O_lo16
779 and O_hi16 expressions as well.
780 (tokenize_arguments): Handle closing braces and colons.
781 (parse_arguments): Use new xtensa-isa.h functions. Handle "invisible"
782 operands and paired register syntax.
783 (get_invisible_operands): New.
784 (xg_translate_sysreg_op): Handle new Xtensa LX RSR/WSR/XSR syntax. Use
785 new xtensa-isa.h functions.
786 (xtensa_translate_old_userreg_ops, xtensa_translate_zero_immed): New.
787 (xg_translate_idioms): Check if inside bundle. Use use_transform.
788 Handle new Xtensa LX RSR/WSR/XSR syntax. Remove code to widen density
789 instructions. Use xtensa_translate_zero_immed.
790 (operand_is_immed, operand_is_pcrel_label): Delete.
791 (get_relaxable_immed): Use new xtensa-isa.h functions.
792 (get_opcode_from_buf): Add slot parameter. Use new xtensa-isa.h
794 (xtensa_print_insn_table, print_vliw_insn): New.
795 (is_direct_call_opcode): Use new xtensa-isa.h functions.
796 (is_call_opcode, is_loop_opcode, is_conditional_branch_opcode,
797 is_branch_or_jump_opcode): Delete.
798 (is_movi_opcode, decode_reloc, encode_reloc, encode_alt_reloc): New.
799 (opnum_to_reloc, reloc_to_opnum): Delete.
800 (xtensa_insnbuf_set_operand, xtensa_insnbuf_get_operand): Use new
801 xtensa-isa.h functions. Operate on one slot of an instruction.
802 (xtensa_insnbuf_set_immediate_field, is_negatable_branch,
803 xg_get_insn_size): Delete.
804 (xg_get_build_instr_size): Use xg_get_single_size.
805 (xg_is_narrow_insn, xg_is_single_relaxable_insn): Update calls to
806 xg_build_widen_table. Use xg_get_single_size.
807 (xg_get_max_narrow_insn_size): Delete.
808 (xg_get_max_insn_widen_size, xg_get_max_insn_widen_literal_size,
809 xg_is_relaxable_insn): Update calls to xg_build_widen_table. Use
811 (xg_build_to_insn): Record the loc field. Handle OP_OPERAND_HI16U and
812 OP_OPERAND_LOW16U. Check xg_valid_literal_expression.
813 (xg_expand_to_stack, xg_expand_narrow): Update calls to
814 xg_build_widen_table. Use xg_get_single_size.
815 (xg_immeds_fit): Use new xtensa-isa.h functions. Update call to
817 (xg_symbolic_immeds_fit): Likewise. Also handle O_lo16 and O_hi16, and
818 treat weak symbols conservatively.
819 (xg_check_operand): Use new xtensa-isa.h functions.
820 (is_dnrange): Delete.
821 (xg_assembly_relax): Inline previous calls to tinsn_copy.
822 (xg_finish_frag): Specify separate relax states for the frag and slot0.
823 (is_branch_jmp_to_next, xg_add_branch_and_loop_targets): Use new
824 xtensa-isa.h functions.
825 (xg_instruction_matches_option_term, xg_instruction_matches_or_options,
826 xg_instruction_matches_options): New.
827 (xg_instruction_matches_rule): Handle O_register expressions. Call
828 xg_instruction_matches_options.
829 (transition_rule_cmp): New.
830 (xg_instruction_match): Update call to xg_build_simplify_table.
831 (xg_build_token_insn): Record loc fields.
832 (xg_simplify_insn): Check is_specific_opcode field and
833 density_supported flag.
834 (xg_expand_assembly_insn): Skip checking code_density_available. Use
835 new xtensa-isa.h functions. Call use_transform instead of can_relax.
836 (xg_assemble_literal): Add error handling for O_big. Call
837 record_alignment. Handle O_pltrel.
838 (xg_valid_literal_expression): New.
839 (xg_assemble_literal_space): Add slot parameter. Remove call to
840 set_expr_symbol_offset. Add call to record_alignment. Update call to
842 (xg_emit_insn): Delete.
843 (xg_emit_insn_to_buf): Add format parameter. Update calls to
844 xg_add_opcode_fix and xtensa_insnbuf_to_chars.
845 (xg_add_opcode_fix): Change opcode parameter to tinsn and add format
846 and slot parameters. Handle new "alternate" relocations for absolute
847 literals and CONST16 instructions. Check for bad uses of O_lo16 and
848 O_hi16. Use new xtensa-isa.h functions.
849 (xg_assemble_tokens): Delete.
850 (is_register_writer): Use new xtensa-isa.h functions.
851 (is_bad_loopend_opcode): Check for xtensa_rsr_lcount_opcode instead of
852 old-style RSR from LCOUNT.
853 (next_frag_opcode): Delete.
854 (next_frag_opcode_is_loop, next_frag_format_size, frag_format_size,
855 update_next_frag_state): New.
856 (update_next_frag_nop_state): Delete.
857 (next_frag_pre_opcode_bytes): Use next_frag_opcode_is_loop.
858 (xtensa_mark_literal_pool_location): Check use_literal_section flag and
859 the state of the absolute-literals directive. Add calls to
860 record_alignment and xtensa_set_frag_assembly_state. Call
861 xtensa_switch_to_non_abs_literal_fragment instead of
862 xtensa_switch_to_literal_fragment.
864 (assemble_nop): Use build_nop. Update call to xtensa_insnbuf_to_chars.
865 (get_expanded_loop_offset): Change check for undefined opcode to an
867 (xtensa_set_frag_assembly_state, relaxable_section,
868 xtensa_find_unmarked_state_frags, xtensa_find_unaligned_branch_targets,
869 xtensa_find_unaligned_loops, xg_apply_tentative_value): New.
870 (md_begin): Update call to xtensa_isa_init. Initialize linkrelax to 1.
871 Set lit4_seg_name. Call xg_init_vinsn. Initialize new global opcodes.
872 Call init_op_placement_info_table and xtensa_set_frag_assembly_state.
873 (xtensa_init_fix_data): New.
874 (xtensa_frob_label): Reset label symbol to the current frag. Check
875 do_align_targets and generating_literals flag. Propagate frequency
876 info to new alignment frag. Call xtensa_set_frag_assembly_state.
877 (xtensa_unrecognized_line): New.
878 (xtensa_flush_pending_output): Check if inside a bundle. Add a call
879 to xtensa_set_frag_assembly_state.
880 (error_reset_cur_vinsn): New.
881 (md_assemble): Remove check for literal frag. Remove call to
882 istack_init. Call use_transform instead of use_generics. Parse
883 explicit instruction format specifiers. Move code for
884 a0_b_retw_interlock workaround to xg_assemble_vliw_tokens. Call
885 error_reset_cur_vinsn on errors. Add call to get_invisible_operands.
886 Add dwarf2_where call. Remote automatic alignment for ENTRY
887 instructions. Move call to xtensa_clear_insn_labels to the end.
888 Rearrange to handle bundles.
889 (xtensa_cons_fix_new): Delete.
890 (xtensa_handle_align): New.
891 (xtensa_frag_init): Call xtensa_set_frag_assembly_state. Remove
892 assignment to is_no_density field.
893 (md_pcrel_from): Use new xtensa-isa.h functions. Use decode_reloc
894 instead of reloc_to_opnum. Handle "alternate" relocations.
895 (xtensa_force_relocation, xtensa_check_inside_bundle,
896 xtensa_elf_section_change_hook): New.
897 (xtensa_symbol_new_hook): Delete.
898 (xtensa_fix_adjustable): Check for difference of symbols with an
899 offset. Check for external and weak symbols.
900 (md_apply_fix3): Remove cases for XTENSA_OP{0,1,2} relocs.
901 (md_estimate_size_before_relax): Return expansion for the first slot.
902 (tc_gen_reloc): Handle difference of symbols by producing
903 XTENSA_DIFF{8,16,32} relocs and by writing the value of the difference
904 into the output. Handle new XTENSA_SLOT*_OP relocs by storing the
905 tentative values into the output when linkrelax is set.
906 (XTENSA_PROP_SEC_NAME): Define.
907 (xtensa_post_relax_hook): Call xtensa_find_unmarked_state_frags.
908 Create literal tables only if using literal sections. Create new
909 property tables instead of old instruction tables. Check for unaligned
910 branch targets and loops.
911 (finish_vinsn, find_vinsn_conflicts, check_t1_t2_reads_and_writes,
912 new_resource_table, clear_resource_table, resize_resource_table,
913 resources_available, reserve_resources, release_resources,
914 opcode_funcUnit_use_unit, opcode_funcUnit_use_stage,
915 resources_conflict, xg_find_narrowest_format, relaxation_requirements,
916 bundle_single_op, emit_single_op, xg_assemble_vliw_tokens): New.
917 (xtensa_end): Call xtensa_flush_pending_output. Set past_xtensa_end
918 flag. Update checks for workaround options. Call
919 xtensa_mark_narrow_branches and xtensa_mark_zcl_first_insns.
920 (xtensa_cleanup_align_frags): Add special case for branch targets.
921 Check for and mark unreachable frags.
922 (xtensa_fix_target_frags): Remove use of align_only_targets flag.
923 Use RELAX_LOOP_END_BYTES in special case for negatable branch at the
924 end of a zero-overhead loop body.
925 (frag_can_negate_branch): Handle instructions with multiple slots.
926 Use new xtensa-isa.h functions
927 (xtensa_mark_narrow_branches, is_narrow_branch_guaranteed_in_range,
928 xtensa_mark_zcl_first_insns): New.
929 (xtensa_fix_a0_b_retw_frags, xtensa_fix_b_j_loop_end_frags): Error if
930 transformations are disabled.
931 (next_instrs_are_b_retw): Use new xtensa-isa.h functions. Handle
932 multislot instructions.
933 (xtensa_fix_close_loop_end_frags, xtensa_fix_short_loop_frags):
934 Likewise. Also error if transformations are disabled.
935 (unrelaxed_frag_max_size): New.
936 (unrelaxed_frag_min_insn_count, unrelax_frag_has_b_j): Use new
937 xtensa-isa.h functions.
938 (xtensa_sanity_check, is_empty_loop, is_local_forward_loop): Use
939 xtensa_opcode_is_loop instead of is_loop_opcode.
940 (get_text_align_power): Replace as_fatal with assertion.
941 (get_text_align_fill_size): Iterate instead of using modulus when
943 (get_noop_aligned_address): Assert that this is for a machine-dependent
944 RELAX_ALIGN_NEXT_OPCODE frag. Use next_frag_opcode_is_loop,
945 xg_get_single_size, and frag_format_size.
946 (get_widen_aligned_address): Rename to ...
947 (get_aligned_diff): ... this function. Add max_diff parameter.
948 Remove handling of rs_align/rs_align_code frags. Use
949 next_frag_format_size, get_text_align_power, get_text_align_fill_size,
950 next_frag_opcode_is_loop, and xg_get_single_size. Compute max_diff
951 and pass it back to caller.
952 (xtensa_relax_frag): Use relax_frag_loop_align. Add code for new
953 RELAX_SLOTS, RELAX_MAYBE_UNREACHABLE, RELAX_MAYBE_DESIRE_ALIGN,
954 RELAX_FILL_NOP, and RELAX_UNREACHABLE frag types. Check relax_seen.
955 (relax_frag_text_align): Rename to ...
956 (relax_frag_loop_align): ... this function. Assume loops can only be
957 in the first slot of an instruction.
958 (relax_frag_add_nop): Use assemble_nop instead of constructing an OR
959 instruction. Remove call to frag_wane.
960 (relax_frag_narrow): Rename to ...
961 (relax_frag_for_align): ... this function. Extend to handle
962 RELAX_FILL_NOP and RELAX_UNREACHABLE, as well as RELAX_SLOTS with
963 RELAX_NARROW for the first slot.
964 (find_address_of_next_align_frag, bytes_to_stretch): New.
965 (future_alignment_required): Use find_address_of_next_align_frag and
966 bytes_to_stretch. Look ahead to subsequent frags to make smarter
968 (relax_frag_immed): Add format, slot, and estimate_only parameters.
969 Check if transformations are enabled for b_j_loop_end workaround.
970 Use new xtensa-isa.h functions and handle multislot instructions.
971 Update call to xg_assembly_relax.
972 (md_convert_frag): Handle new RELAX_SLOTS, RELAX_UNREACHABLE,
973 RELAX_MAYBE_UNREACHABLE, RELAX_MAYBE_DESIRE_ALIGN, and RELAX_FILL_NOP
975 (convert_frag_narrow): Add segP, format and slot parameters. Call
976 convert_frag_immed for branch instructions. Adjust calls to
977 tinsn_from_chars, tinsn_immed_from_frag, and xg_emit_insn_to_buf. Use
978 xg_get_single_size and xg_get_single_format.
979 (convert_frag_fill_nop): New.
980 (convert_frag_immed): Add format and slot parameters. Handle multislot
981 instructions and use new xtensa-isa.h functions. Update calls to
982 tinsn_immed_from_frag and xg_assembly_relax. Check if transformations
983 enabled for b_j_loop_end workaround. Use build_nop instead of
984 assemble_nop. Check is_specific_opcode flag. Check for unreachable
985 frags. Use xg_get_single_size. Handle O_pltrel.
986 (fix_new_exp_in_seg): Remove check for old plt flag.
987 (convert_frag_immed_finish_loop): Update calls to tinsn_from_chars and
988 xtensa_insnbuf_to_chars. Call tinsn_immed_from_frag. Change check
989 for loop opcode to an assertion. Mark all frags up to the end of the
990 loop as not transformable.
991 (get_last_insn_flags, set_last_insn_flags): Use get_subseg_info.
992 (get_subseg_info): New.
993 (xtensa_move_literals): Call xtensa_set_frag_assembly_state. Add null
995 (xtensa_switch_to_literal_fragment): Rewrite to handle absolute
996 literals and use xtensa_switch_to_non_abs_literal_fragment otherwise.
997 (xtensa_switch_to_non_abs_literal_fragment): New.
998 (cache_literal_section): Add is_code parameter and pass it through to
999 retrieve_literal_seg.
1000 (retrieve_literal_seg): Add is_code parameter and use it to set the
1001 flags on the literal section. Handle case where head parameter is 0.
1002 (get_frag_is_no_transform, set_frag_is_specific_opcode,
1003 set_frag_is_no_transform): New.
1004 (xtensa_create_property_segments): Add end_property_function parameter
1005 and pass it through to add_xt_block_frags. Call bfd_get_section_flags
1006 and skip SEC_DEBUGGING and !SEC_ALLOC sections.
1007 (xtensa_create_xproperty_segments, section_has_xproperty): New.
1008 (add_xt_block_frags): Add end_property_function parameter and call it
1009 if it is non-zero. Call xtensa_frag_flags_init.
1010 (xtensa_frag_flags_is_empty, xtensa_frag_flags_init,
1011 get_frag_property_flags, frag_flags_to_number,
1012 xtensa_frag_flags_combinable, xt_block_aligned_size,
1013 xtensa_xt_block_combine, add_xt_prop_frags,
1014 init_op_placement_info_table, opcode_fits_format_slot,
1015 xg_get_single_size, xg_get_single_format): New.
1016 (istack_push): Inline call to tinsn_copy.
1017 (tinsn_copy): Delete.
1018 (tinsn_has_invalid_symbolic_operands): Handle O_hi16 and O_lo16 and
1019 CONST16 opcodes. Handle O_big, O_illegal, and O_absent.
1020 (tinsn_has_complex_operands): Handle O_hi16 and O_lo16.
1021 (tinsn_to_insnbuf): Use xg_get_single_format and new xtensa-isa.h
1022 functions. Handle invisible operands.
1023 (tinsn_to_slotbuf): New.
1024 (tinsn_check_arguments): Use new xtensa-isa.h functions.
1025 (tinsn_from_chars): Add slot parameter. Rewrite using xg_init_vinsn,
1026 vinsn_from_chars, and xg_free_vinsn.
1027 (tinsn_from_insnbuf): New.
1028 (tinsn_immed_from_frag): Add slot parameter and handle multislot
1029 instructions. Handle symbol differences.
1030 (get_num_stack_text_bytes): Use xg_get_single_size.
1031 (xg_init_vinsn, xg_clear_vinsn, vinsn_has_specific_opcodes,
1032 xg_free_vinsn, vinsn_to_insnbuf, vinsn_from_chars, expr_is_register,
1033 get_expr_register, set_expr_symbol_offset_diff): New.
1034 * config/tc-xtensa.h (MAX_SLOTS): Define.
1035 (xtensa_relax_statesE): Move from tc-xtensa.c. Add
1036 RELAX_CHECK_ALIGN_NEXT_OPCODE, RELAX_MAYBE_DESIRE_ALIGN, RELAX_SLOTS,
1037 RELAX_FILL_NOP, RELAX_UNREACHABLE, RELAX_MAYBE_UNREACHABLE, and
1039 (RELAX_IMMED_MAXSTEPS): Move from tc-xtensa.c.
1040 (xtensa_frag_type struct): Add is_assembly_state_set,
1041 use_absolute_literals, relax_seen, is_unreachable, is_specific_opcode,
1042 is_align, is_text_align, alignment, and is_first_loop_insn fields.
1043 Replace is_generics and is_relax fields by is_no_transform field.
1044 Delete is_text and is_longcalls fields. Change text_expansion and
1045 literal_expansion to arrays of MAX_SLOTS entries. Add arrays of
1046 per-slot information: literal_frags, slot_subtypes, slot_symbols,
1047 slot_sub_symbols, and slot_offsets. Add fr_prev field.
1048 (xtensa_fix_data struct): New.
1049 (xtensa_symfield_type struct): Delete plt field.
1050 (xtensa_block_info struct): Move definition to tc-xtensa.h. Add
1051 forward declaration here.
1052 (xt_section_type enum): Delete xt_insn_sec. Add xt_prop_sec.
1053 (XTENSA_SECTION_RENAME): Undefine.
1054 (TC_FIX_TYPE, TC_INIT_FIX_DATA, TC_FORCE_RELOCATION, NO_PSEUDO_DOT,
1055 tc_unrecognized_line, md_do_align, md_elf_section_change_hook,
1056 HANDLE_ALIGN, TC_LINKRELAX_FIXUP, SUB_SEGMENT_ALIGN): Define.
1057 (TC_CONS_FIX_NEW, tc_symbol_new_hook): Delete.
1058 (unit_num_copies_func, opcode_num_units_func,
1059 opcode_funcUnit_use_unit_func, opcode_funcUnit_use_stage_func): New.
1060 (resource_table struct): New.
1061 * config/xtensa-istack.h (MAX_INSN_ARGS): Increase from 6 to 10.
1062 (TInsn struct): Add keep_wide, loc, fixup, record_fix, subtype,
1063 literal_space, symbol, sub_symbol, offset, and literal_frag fields.
1064 (tinsn_copy): Delete prototype.
1065 (vliw_insn struct): New.
1066 * config/xtensa-relax.c (insn_pattern_struct): Add options field.
1067 (widen_spec_list): Add option conditions for density and boolean
1068 instructions. Add expansions using CONST16 and conditions for using
1069 CONST16 vs. L32R. Use new Xtensa LX RSR/WSR syntax. Add entries for
1071 (simplify_spec_list): Add option conditions for density instructions.
1072 Add entry for NOP instruction.
1073 (append_transition): Add cmp function pointer parameter and use it to
1074 insert the new entry in order.
1075 (operand_function_LOW16U, operand_function_HI16U): New.
1076 (xg_has_userdef_op_fn, xg_apply_userdef_op_fn): Handle
1077 OP_OPERAND_LOW16U and OP_OPERAND_HI16U.
1078 (enter_opname, split_string): Use xstrdup instead of strdup.
1079 (init_insn_pattern): Initialize new options field.
1080 (clear_req_or_option_list, clear_req_option_list,
1081 clone_req_or_option_list, clone_req_option_list, parse_option_cond):
1083 (parse_insn_pattern): Parse option conditions.
1084 (transition_applies): New.
1085 (build_transition): Use new xtensa-isa.h functions. Fix incorrectly
1086 swapped last arguments in calls to append_constant_value_condition.
1087 Call clone_req_option_list. Add warning about invalid opcode.
1088 Handle LOW16U and HI16U function names.
1089 (build_transition_table): Add cmp parameter and use it in calls to
1090 append_transition. Use new xtensa-isa.h functions. Check
1091 transition_applies before adding entries.
1092 (xg_build_widen_table, xg_build_simplify_table): Add cmp parameter and
1093 pass it through to build_transition_table.
1094 * config/xtensa-relax.h (ReqOrOptionList, ReqOrOption, ReqOptionList,
1095 ReqOption, transition_cmp_fn): New types.
1096 (OpType enum): Add OP_OPERAND_LOW16U and OP_OPERAND_HI16U.
1097 (transition_rule struct): Add options field.
1098 * doc/as.texinfo (Overview): Update Xtensa options.
1099 * doc/c-xtensa.texi (Xtensa Options): Delete --[no-]density,
1100 --[no-]relax, and --[no-]generics options. Update descriptions of
1101 --text-section-literals and --[no-]longcalls. Add
1102 --[no-]absolute-literals and --[no-]transform.
1103 (Xtensa Syntax): Add description of syntax for FLIX instructions.
1104 Remove use of "generic" and "specific" terminology for opcodes.
1105 (Xtensa Registers): Generalize the syntax description to include
1106 user-defined register files.
1107 (Xtensa Automatic Alignment): Update.
1108 (Xtensa Branch Relaxation): Mention limitation of unconditional jumps.
1109 (Xtensa Call Relaxation): Linker can now remove most of the overhead.
1110 (Xtensa Directives): Remove confusing rules about precedence.
1111 (Density Directive, Relax Directive): Delete.
1112 (Schedule Directive): New.
1113 (Generics Directive): Rename to ...
1114 (Transform Directive): ... this node.
1115 (Literal Directive): Update for absolute literals. Missing
1116 literal_position directive is now an error.
1117 (Literal Position Directive): Update for absolute literals.
1118 (Freeregs Directive): Delete.
1119 (Absolute Literals Directive): New.
1120 (Frame Directive): Minor editing.
1121 * Makefile.am (DEPTC_xtensa_elf, DEPOBJ_xtensa_elf, DEP_xtensa_elf):
1122 Update dependencies.
1123 * Makefile.in: Regenerate.
1125 2004-10-07 Richard Sandiford <rsandifo@redhat.com>
1127 * config/tc-mips.c (append_insn): Use fix_new rather than fix_new_exp
1128 to build the second and third fixups for a composite relocation.
1129 (macro_read_relocs): New function.
1130 (macro_build): Use it.
1131 (s_cpsetup): Pass all three composite relocation codes to macro_build.
1132 Simplify fragging code accordingly.
1133 (s_gpdword): Use fix_new rather than fix_new_exp for the second part
1134 of the composite relocation. Set fx_tcbit in both fixups.
1136 2004-10-07 Richard Sandiford <rsandifo@redhat.com>
1138 * config/tc-mips.c (append_insn): Set fx_tcbit for composite relocs.
1139 (md_apply_fix3): Don't treat composite relocs as done.
1141 2004-10-07 Jan Beulich <jbeulich@novell.com>
1143 * macro.c (macro_expand_body): When ELF, use .LL rather than LL as
1144 prefix for symbol names generated from the LOCAL macro directive.
1146 * dw2gencfi.c (select_cie_for_fde): When separating CIE out from
1147 FDE, treat a DW_CFA_remember_state as we do a DW_CFA_advance_loc.
1149 2004-10-07 Tomer Levi <Tomer.Levi@nsc.com>
1151 * config/tc-crx.c (preprocess_reglist): Handle Co-processor
1153 (md_assemble): Add error checking for Co-Processor instructions.
1154 (get_cinv_parameters): Add 'b' option to invalidate the
1155 branch-target cache.
1157 2004-10-05 Paul Brook <paul@codesourcery.com>
1159 * config/tc-arm.c (unwind): New variable.
1160 (vfp_sp_encode_reg): New function.
1161 (vfp_sp_reg_required_here): Use it.
1162 (vfp_sp_reg_list, vfp_dp_reg_list): Remove.
1163 (vfp_parse_reg_list): New function.
1164 (s_arm_unwind_fnstart, s_arm_unwind_fnend, s_arm_unwind_cantunwind,
1165 s_arm_unwind_personality, s_arm_unwind_personalityindex,
1166 s_arm_unwind_handlerdata, s_arm_unwind_save, s_arm_unwind_movsp,
1167 s_arm_unwind_pad, s_arm_unwind_setfp, s_arm_unwind_raw): New
1169 (md_pseudo_table): Add them.
1170 (do_vfp_reg2_from_sp2): Use vfp_parse_reg_list and vfp_sp_encode_reg.
1171 (do_vfp_sp2_from_reg2, vfp_sp_ldstm, vfp_dp_ldstm): Ditto.
1172 (set_section, add_unwind_adjustsp, flush_pending_unwind,
1173 finish_unwind_opcodes, start_unwind_section, create_unwind_entry,
1174 require_hashconst, add_unwind_opcode): New functions.
1175 * doc/tc-arm.text: Document unwinding opcodes.
1176 * NEWS: Mention the new feature.
1178 2004-10-04 Eric Christopher <echristo@redhat.com>
1180 * config/tc-mips.c (md_apply_fix3): Remove erroneous assert.
1182 2004-10-01 H.J. Lu <hongjiu.lu@intel.com>
1184 * config/tc-ppc.c (md_apply_fix3): Call S_SET_THREAD_LOCAL for
1186 * config/tc-s390.c (md_apply_fix3): Likewise.
1187 * config/tc-sparc.c (md_apply_fix3): Likewise.
1189 2004-10-01 Paul Brook <paul@codesourcery.com>
1191 * config/tc-arm.c (arm_elf_section_type): New function.
1192 (arm_elf_change_section): Set section link for exidx sections.
1193 * config/tc-arm.h (arm_elf_section_type): Add prototype.
1194 (md_elf_section_type): Define.
1196 2004-10-01 Bill Farmer <Bill@the-farmers.freeserve.co.uk>
1198 * config/tc-pdp11.c (md_apply_fix3): Change to sign of the SOB
1199 instruction's offset.
1201 2004-10-01 Adam Nemet <anemet@lnxw.com>
1203 * (TARGET_FORMAT): Remove LynxOS COFF definition.
1205 2004-10-01 Ravi Ramaseshan <ravi.ramaseshan@codito.com>
1207 * config/tc-arc.c (tc_gen_reloc): Don't assume fixP->fx_addsy is an
1208 asymbol *, instead use symbol_get_bfdsym.
1210 2004-09-30 Linus Nielsen Feltzing <linus@haxx.se>
1212 * config/tc-m68k.c (select_control_regs): Add mcf5249.
1214 2004-09-30 Paul Brook <paul@codesourcery.com>
1216 * config/tc-arm.c (do_smi, do_nop): New functions.
1217 (insns): Add ARMv6ZK instructions.
1218 (md_apply_fix3): Handle BFD_RELOC_ARM_SMI.
1219 (tc_gen_reloc): Ditto.
1220 (arm_cpus): Add mpcore and arm1176.
1221 (arm_archs): Add armv6{k,z,zk}.
1222 * doc/c-arm.texi: Document new cores and architectures.
1224 2004-09-30 Nick Clifton <nickc@redhat.com>
1226 * config/tc-arm.c: Use ISO C90 formatting.
1228 2004-09-30 Vladimir Ivanov <vladitx@nucleusys.com>
1230 * config/tc-arm.c (mav_reg_required_here): Allow REG_TYPE_CN
1231 as alternative when REG_TYPE_MVF, REG_TYPE_MVD, REG_TYPE_MVFX or
1232 REG_TYPE_MVDX is expected.
1234 2004-09-29 Marc Bevand <m.bevand@gmail.com>
1236 * doc/c-i386.texi (i386-Mnemonics): Fix typo.
1238 2004-09-21 James E Wilson <wilson@specifixinc.com>
1240 * config/tc-ia64.c (ENCODED_PSP_OFFSET): New.
1241 (output_rp_psprel, output_pfs_psprel, output_preds_psprel,
1242 output_spill_base, output_unat_psprel, output_lc_psprel,
1243 output_fpsr_psprel, output_priunat_psprel, output_bsp_psprel,
1244 output_bsprestore_psprel, output_rnat_psprel, output_spill_psprel,
1245 output_spill_psprel_p): Use it.
1247 2004-09-20 Tomer Levi <Tomer.Levi@nsc.com>
1249 * config/tc-crx.c (handle_LoadStor): New function.
1250 Handle load/stor unique instructions before parsing.
1252 2004-09-17 Paul Brook <paul@codesourcery.com>
1254 * config/tc-arm.c (s_arm_rel31): New funciton.
1255 (md_pseudo_table): Add .rel31.
1256 (md_apply_fix3): Handle BFD_RELOC_ARM_TARGET2,
1257 BFD_RELOC_32_PCREL and BFD_RELOC_ARM_PREL31.
1258 (tc_gen_reloc): Handle BFD_RELOC_ARM_PREL31 and BFD_RELOC_ARM_TARGET2.
1259 (arm_fix_adjustable): Return 0 for BFD_RELOC_ARM_TARGET2.
1260 (arm_parse_reloc): Add (target2).
1262 2004-09-17 Alan Modra <amodra@bigpond.net.au>
1264 * Makefile.am: Run "make dep-am".
1265 * Makefile.in: Regenerate.
1266 * aclocal.m4: Regenerate.
1267 * configure: Regenerate.
1268 * doc/Makefile.in: Regenerate.
1269 * po/POTFILES.in: Regenerate.
1270 * po/gas.pot: Regenerate.
1272 2004-09-14 Hideki IWAMOTO <h-iwamoto@kit.hi-ho.ne.jp>
1274 * config/tc-mmix.c [!LLONG_MIN]: Correct #elsif to #elif.
1275 [!LLONG_MAX]: Ditto.
1277 2004-09-13 Paul Brook <paul@codesourcery.com>
1279 * config/tc-arm.c: Rename RELABS to TARGET1.
1281 2004-09-13 Alan Modra <amodra@bigpond.net.au>
1283 * messages.c (as_internal_value_out_of_range): Cast values passed
1284 to as_bad_where or as_warn_where to proper type.
1286 2004-09-11 Theodore A. Roth <troth@openavr.org>
1288 * config/tc-avr.c: Add support for
1289 atmega48, atmega88, atmega168, attiny13, attiny2313, at90can128.
1291 2004-09-09 Alan Modra <amodra@bigpond.net.au>
1293 * dw2gencfi.c (select_cie_for_fde): When separating CIE out
1294 from FDE, treat a CFI_escape as we do a DW_CFA_advance_loc.
1296 2004-09-08 Paul Brook <paul@codesourcery.com>
1298 * config/obj-elf.c (obj_elf_section_type): Handle init_array,
1299 fini_array and preinit_array section types.
1300 * config/tc-ia64.c (ia64_elf_section_type): Remove init_array
1302 * doc/as.texinfo: Document extra section types.
1304 2004-09-02 Mark Mitchell <mark@codesourcery.com>
1306 * Makefile.am (TARG_ENV_HFILES): Add te-symbian.h.
1307 * Makefile.in: Regenerated.
1308 * configure.in: Set em for arm*-*-symbianelf*.
1309 * configure: Regenerated.
1310 * config/tc-arm.c (elf32_arm_target_format): Use Symbian target
1311 vectors when appropriate.
1312 * config/te-symbian.h: New file.
1314 2004-09-03 Tomer Levi <Tomer.Levi@nsc.com>
1316 * config/tc-crx.c (gettrap): Exception vector can be case
1318 (process_label_constant): Fix a 32-bit displacement bug in branch
1320 (get_operandtype) : Bug fix, wrong operand was used.
1321 (process_label_constant): Initialize relocation type to
1324 2004-09-01 Richard Earnshaw < reanrsha@arm.com>
1326 * tc-arm.c (arm_cpus, arm_fpus): Allow <cpu>-s as well as <cpu>s
1327 for synthesizable cores.
1329 * doc/c-arm.texi (ARM Options): Document canonical names of CPUs.
1331 2004-08-25 Dmitry Diky <diwil@spec.ru>
1333 * config/tc-msp430.c: Clean-up the code.
1334 (md_relax_table): New relax table.
1335 (mcu_types): Sort MCU types.
1336 (md_pseudo_table): Add .profiler pseudo handler.
1337 (pow2value): New function.
1338 (msp430_profiler): New function.
1339 (msp430_operands): Add new insns handlers.
1340 (msp430_srcoperand): Add register operand handler, allow complex
1342 (md_estimate_size_before_relax): Rewritten.
1343 (md_convert_frag): Rewritten.
1344 (msp430_relax_frag): New function.
1345 * config/tc-msp430.h (md_relax_frag): define macro
1346 * doc/c-msp430.texi: Update information.
1348 2004-08-24 Nick Clifton <nickc@redhat.com>
1350 * as.c (std_shortopts): Allow -g to take an optional argument.
1351 (parse_args): Pass any switch starting with -g on to the backend
1354 2004-08-18 Mark Mitchell <mark@codesourcery.com>
1356 * configure.in (arm*-*-symbianelf*): New target.
1357 (arm*-*-eabi*): Likewise.
1358 * configure: Regenerated.
1360 2004-08-18 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
1361 * config/tc-mips.c (append_insn): Handle delay slots in branch likely
1364 2004-08-18 Jakub Jelinek <jakub@redhat.com>
1366 * config/tc-ia64.c (start_unwind_section): Add linkonce_empty
1367 argument, don't do anything if current section is not
1368 .gnu.linkonce.t.* and linkonce_empty is set.
1369 (generate_unwind_image, dot_endp): Adjust callers, call
1370 start_unwind_section (*, 1) if nothing will be put into the
1373 2004-08-17 Nick Clifton <nickc@redhat.com>
1375 * as.c (MD_DEBUG_FORMAT_SELECTOR): Provide default definition.
1376 (show_usage): Add -g.
1377 (std_longopts): Add --gen-debug. Alpha sort the table.
1378 (parse_args): Print an error message if a switch is not handled.
1379 Handle the -g switch, calling md_debug_format_selector() if
1381 * NEWS: Mention new feature.
1382 * doc/as.texinfo: Document new switch.
1383 * doc/internals.texi: Document behaviour of md_parse_option.
1385 * config/tc-arm.c (md_parse_option): Do not issue an error message
1386 if the switch is not recognised.
1387 * config/tc-m68k.c (md_parse_option): Likewise.
1388 * config/tc-pdp11.c (md_parse_option): Likewise.
1389 * config/tc-v850.c (md_parse_option): Likewise.
1391 * as.h: Fix up formatting.
1394 2004-08-16 Nick Clifton <nickc@redhat.com>
1396 * macro.c (macro_set_alternate): Use ISO C90 formatting.
1398 * configure.in: Sort architecture based tables alphabetically.
1399 * configure: Regenerate.
1401 2004-08-16 Alan Modra <amodra@bigpond.net.au>
1403 * config/tc-ppc.c (tc_ppc_regname_to_dw2regnum <regnames>): Replace
1404 { "cc", 68 }, with { "cr", 70 }.
1406 2004-08-13 Jan Beulich <jbeulich@novell.com>
1407 Nick Clifton <nickc@redhat.com>
1409 * as.c: Add and handle new --alternate command line option.
1410 * macro.c (macro_set_alternate): New.
1411 * macro.h (macro_set_alternate): Declare.
1412 * read.c: Add and handle new .altmacro and .noaltmacro directives.
1413 * doc/as.texinfo: Document new command line option and pseudo-ops
1414 as well as insert documentation originating from gasp about
1415 alternate macro syntax.
1416 * NEWS: Mention new command line option and pseudo-ops.
1418 2004-08-10 Mark Mitchell <mark@codesourcery.com>
1420 * expr.c (operand): Handle the "~", "-", and "!" operators applied
1423 2004-08-06 Paul Brook <paul@codesourcery.com>
1425 * config/tc-arm.c (md_apply_fix3, tc_gen_reloc, arm_parse_reloc):
1426 Handle new relocations.
1427 * include/elf/arm.h (elf_arm_reloc_type): Add new EABI relocations.
1429 2004-08-05 Bob Wilson <bob.wilson@acm.org>
1431 * write.c (relax_segment): Use was_address instead of address when
1432 setting fr_fix field for align frag due to backwards .org.
1434 2004-07-29 Alexandre Oliva <aoliva@redhat.com>
1436 Introduce SH2a support.
1437 2004-02-24 Corinna Vinschen <vinschen@redhat.com>
1438 * config/tc-sh.c (get_specific): Change arch_sh2a_up to
1440 2004-02-24 Corinna Vinschen <vinschen@redhat.com>
1441 * config/tc-sh.c (md_parse_option): Add sh2a-nofpu ISA handling.
1442 2004-02-20 Corinna Vinschen <vinschen@redhat.com>
1443 * config/tc-sh.c (sh_elf_final_processing): Move sh2a recognition
1444 to end of conditional expression.
1445 2004-02-20 Corinna Vinschen <vinschen@redhat.com>
1446 * config/tc-sh.c: Add sh2a-nofpu support.
1447 2003-12-29 DJ Delorie <dj@redhat.com>
1448 * tc-sh.c: Add sh2a support.
1449 (parse_reg): Add tbr.
1450 (parse_at): Support @@(disp,tbr).
1451 (get_specific): Support sh2a opcodes.
1452 (insert4): New, for 4 byte relocs.
1453 (build_Mytes): Support sh2a opcodes.
1454 (md_apply_fix3_Mytes): Support sh2a opcodes.
1455 2003-12-02 Michael Snyder <msnyder@redhat.com>
1456 * config/tc-sh.c (md_parse_option): Handle sh2a.
1457 (sh_elf_final_processing): Ditto.
1459 2004-07-27 Jason Thorpe <thorpej@wasabisystems.com>
1461 * config/tc-hppa.h (TARGET_FORMAT): Set to "elf32-hppa-netbsd"
1464 2004-07-27 Alan Modra <amodra@bigpond.net.au>
1466 * config/tc-ppc.c (ppc_frob_file_before_adjust): Warn if .toc too big.
1467 (ppc_arch): Expand comment.
1469 2004-07-27 Tomer Levi <Tomer.Levi@nsc.com>
1471 * config/tc-crx.c: Support evaluating the difference between two
1473 * config/tc-crx.h: Likewise.
1475 2004-07-26 H.J. Lu <hongjiu.lu@intel.com>
1477 * config/tc-ia64.c (start_unwind_section): Set the linked-to
1479 (ia64_elf_section_change_hook): Set the linked-to section for
1482 2004-07-26 Dmitry Diky <diwil@spec.ru>
1484 * config/tc-msp430.c: Add new subtargets: msp430x1610,
1485 msp430x1611, msp430x1612, msp430x415, msp430x417, msp430xG437,
1486 msp430xG438, msp430xG439.
1488 2004-07-25 Daniel Jacobowitz <dan@debian.org>
1490 * doc/as.texinfo (Section, PushSection): Correct documentation
1493 2004-07-21 Jan Beulich <jbeulich@novell.com>
1495 * config/tc-i386.c (optimize_imm): Adjust immediates to only those
1496 permissible for the selected instruction suffix.
1497 (match_template): Don't permit 64-bit general purpose operands in
1499 (finalize_imm): Permit 64-bit immediates.
1500 (build_modrm_byte): Don't treat 32-bit addressing in 64-bit mode
1501 specially except for the width of the used base and/or index
1502 registers. For 32-bit displacements, use sign-extended
1503 relocations only when using 64-bit addressing.
1504 Force zero displacement on rip-relative addressing when there is
1505 no other displacement.
1506 (i386_index_check): Don't treat 32-bit addressing in 64-bit mode
1507 specially except for the width of the used base and/or index
1509 (parse_register): Disallow Reg64 registers in 32-bit mode.
1511 * config/tc-i386.c: For DefaultSize instructions, don't guess a 'q'
1512 suffix if the instruction doesn't support it.
1514 2004-07-20 Maciej W. Rozycki <macro@linux-mips.org>
1516 * config/tc-mips.c (append_insn): Handle constant expressions with
1517 no associated relocation.
1518 (mips_ip): Cancel the expression after use for the Q format
1520 (parse_relocation): Return no relocation for unsupported
1522 (my_getSmallExpression): Return no relocation if no relocation
1525 2004-07-19 John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
1527 * config/obj-som.c (adjust_stab_sections): Add prototype.
1528 (obj_som_compiler, obj_som_version, obj_som_copyright,
1529 adjust_stab_sections): Add ATTRIBUTE_UNUSED to unused arguments.
1530 * config/tc-hppa.c (update_subspace): Likewise.
1531 (is_defined_subspace): Amplify comment.
1532 * config/obj-som.h (som_frob_file): Add prototype.
1534 2004-07-19 Christopher Faylor <cgf@timesys.com>
1535 H.J. Lu <hongjiu.lu@intel.com>
1537 * subsegs.c (section_symbol): Don't create a new segment when
1538 existing segment is undefined.
1540 2004-07-16 Richard Earnshaw <rearnsha@arm.com>
1542 * config/tc-arm.c: Include include/opcode/arm.h.
1543 (ARM_EXT_*, ARM_ARCH_*, ARM_ANY, ARM_ALL, COPROC_ANY): Delete.
1544 (FPU_FPA_EXT_* FPU_VFP_EXT_*, FPU_ANY, FPU_NONE, FPU_MAVERICK): Delete.
1545 (FPU_ARCH_*): Delete.
1546 * Makefile.am: Update dependencies.
1547 * Makefile.in: Regenerate.
1549 2004-07-15 Nick Clifton <nickc@redhat.com>
1551 * configure.in: Accept armbe as a big-endian arm configuration.
1552 * configure: Regenerate.
1554 2004-07-13 Thomas Nystrom <thn@saeab.se>
1556 * config/tc-i386.c (T_SHIFTOP): New constant.
1557 (intel_e05_1): Handle '&', '|' and T_SHIFTOP.
1558 (intel_el1): Handle '~'.
1559 (intel_get_token): Handle '<>', '&', '|' and '~'.
1561 2004-07-13 Nick Clifton <nickc@redhat.com>
1563 (md_assemble): Remove spurious newline from end of as_bad error
1565 (intel_e05_1): Likewise.
1566 (intel_e11): Likewise.
1567 (intel_match_token): Likewise.
1569 2004-07-11 Andreas Schwab <schwab@suse.de>
1571 * config/tc-m68k.c: Convert to C90. Remove redundant
1572 declarations. Indentation fixup.
1573 [M68KCOFF]: Include "obj-coff.h" instead of declaring
1574 obj_coff_section ourselves.
1576 2004-07-09 James E Wilson <wilson@specifixinc.com>
1578 * config/tc-ia64.c (default_big_endian): New.
1579 (dot_byteorder, md_begin): Use it.
1580 (md_parse_option): Set it.
1582 2004-07-09 Nick Clifton <nickc@redhat.com>
1584 * configure.in: Change sh-sybmian-elf to sh-*-symbianelf.
1585 * configure: Regenerate.
1586 * NEWS: Change sh-sybmian-elf to sh-*-symbianelf.
1587 * config/tc-sh.c (sh_elf_final_processing): Use renamed version of
1588 sh_find_elf_flags if necessary.
1590 2004-07-08 Richard Sandiford <rsandifo@redhat.com>
1592 * config/tc-mips.c (mips_fix_adjustable): If the full addend is
1593 going to be split into more than one in-place addend, return 0
1594 for relocations against mergeable sections. Associate comments
1597 2004-07-07 Tomer Levi <Tomer.Levi@nsc.com>
1599 * Makefile.am (CPU_TYPES): Add crx.
1600 (TARGET_CPU_CFILES): Add config/tc-crx.c.
1601 (TARGET_CPU_HFILES): Add config/tc-crx.h.
1602 (DEPTC_crx_elf): New target.
1603 (DEPOBJ_crx_elf): Likewise.
1604 (DEP_crx_elf): Likewise.
1605 * Makefile.in: Regenerate.
1606 * configure.in: Add crx* target.
1607 * configure: Regenerate.
1608 * config/tc-crx.c: New file.
1609 * config/tc-crx.h: New file.
1610 * NEWS: Mention new target.
1612 2004-07-06 Nick Clifton <nickc@redhat.com>
1614 * config.in: Undefine TARGET_SYMBIAN by default.
1616 * configure: Regenerate. Add sh-symbian-elf target. If
1617 selected define TARGET_SYMBIAN.
1618 * config/tc-sh.h (TARGET_FORMAT): Select a Symbian target
1619 format if TARGET_SYMBIAN has been defined.
1621 * output-file.c (output_file_create): Report the target format
1622 chosen when bfd_openw reports that it is invalid.
1624 * config/obj-coff.c (coff_pseudo_table): Only define the weak
1625 pseudo for BFD based assemblers.
1627 2004-07-05 Andrew Stubbs <andrew.stubbs@superh.com>
1630 * config/tc-sh.c (md_assemble): Change isspace to ISSPACE.
1631 (md_parse_option): Remove redundant -isa testing.
1632 Make bfd_arch variable const.
1633 (md_show_usage): Make bfd_arch variable const.
1635 2004-07-03 James E Wilson <wilson@specifixinc.com>
1637 * config/tc-ia64.c (emit_one_bundle): Check and set insn_addr.
1638 * config/tc-ia64.h (md_frag_check): Define.
1640 2004-07-03 Aaron W. LaFramboise <aaron98wiridge9@aaronwl.com>
1642 * config/obj-coff.c (obj_coff_weak): New .weak syntax for PE weak
1644 * doc/as.texinfo (Weak): Document PE weak symbols.
1646 2004-07-03 Richard Sandiford <rsandifo@redhat.com>
1648 * config/tc-mips.c (HAVE_IN_PLACE_ADDENDS): New macro.
1649 (reloc_needs_lo_p): Only return true if HAVE_IN_PLACE_ADDENDS.
1650 (mips_frob_file): Rework so that only a single pass through the
1651 relocs is needed. Allow %lo()s to have higher offsets than their
1652 corresponding %hi()s or %got()s.
1654 2004-07-02 Nick Clifton <nickc@redhat.com>
1656 * config/tc-arm.c (md_apply_fix3:BFD_RELOC_ARM_IMMEDIATE): Do not
1657 allow values which have come from undefined symbols.
1658 Always consider this fixup to have been processed as a reloc
1659 cannot be generated for it.
1661 2004-07-02 Alan Modra <amodra@bigpond.net.au>
1663 * frags.h (struct frag): Add has_code and insn_addr fields.
1664 * write.c (cvt_frag_to_fill): Invoke md_frag_check.
1665 * config/tc-ppc.c (md_assemble): Check and set insn_addr.
1666 * config/tc-ppc.h (md_frag_check): Define.
1668 2004-06-28 Maciej W. Rozycki <macro@linux-mips.org>
1670 * doc/Makefile.am (info): Rename goal to...
1671 (info-local): ... this, to preserve implicit dependencies.
1672 * doc/Makefile.in: Regenerate with automake 1.8.5.
1674 2004-06-25 Kazuhiro Inaoka <inaoka.kazuhiro@renesas.com>
1676 * config/tc-m32r.c (md_convert_frag): Changed for @PLT.
1677 (m32r_cgen_record_fixup_exp): Changed for @GOTOFF, @GOT.
1678 (m32r_fix_adjustable): Changed for @GOTOFF, @GOT, @PLT.
1679 (tc_gen_reloc): Likewise.
1680 (m32r_end_of_match): Add for @GOTOFF, @GOT, @PLT.
1681 (m32r_parse_name): Likewise.
1682 (m32r_cgen_parse_fix_exp): Likewise.
1683 * config/tc-m32r.h (md_parse_name): Define for @GOTOFF, @GOT, @PLT.
1684 (O_PIC_reloc): Likewise.
1685 (TC_CGEN_PARSE_FIX_EXP): Likewise..
1686 * cgen.c (gas_cgen_parse_operand): Add TC_CGEN_PARSE_FIX_EXP
1687 for @GOTOFF, @GOT, @PLT.
1689 2004-06-21 Jan Beulich <jbeulich@novell.com>
1691 * gas/symbols.c: While discarding ordinary local absolute symbols
1692 when --strip-local-absolute is in effect, retain file symbols.
1694 2004-06-20 Andreas Schwab <schwab@suse.de>
1696 * config/tc-m68k.c (mri_chip): Replace current_chip, not augment.
1697 (md_parse_option): Likewise.
1699 2004-06-17 Jan Beulich <jbeulich@novell.com>
1701 * config/tc-i386.c: Deal with LEX_QM the same way as with LEX_AT.
1702 * config/te-netware.h: New file.
1703 * config/te-ppcnw.h: Delete: Obsolete.
1704 * configure.in: Eliminate ill NetWare targets. Make generic
1705 NetWare target use proper emulation.
1706 * Makefile.am: Eliminate reference to obsolete te-ppcnw.h, add
1707 reference to new te-netware.h.
1708 * configure: Regenerate.
1709 * Makefile.in: Regenerate.
1711 2004-06-15 Martin Schwidefsky <schwidefsky@de.ibm.com>
1713 * config/tc-s390.c (s390_insn): Avoid incorrect signed/unsigned
1714 comparison in .insn pseudo operation.
1716 2004-06-15 Alan Modra <amodra@bigpond.net.au>
1718 * config/obj-coff.c (coff_adjust_section_syms): Use
1719 bfd_get_section_size instead of bfd_get_section_size_before_reloc.
1720 (coff_frob_section): Likewise.
1721 * config/tc-mips.c (md_apply_fix3): Likewise.
1722 * config/obj-elf.c (elf_frob_file): Use bfd_set_section_size.
1723 (elf_frob_file_after_relocs): Likewise.
1725 2004-06-10 John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
1727 * config/tc-hppa.c (log2): Rename to exact_log2.
1728 (pa_next_subseg): Delete unused function.
1729 (create_new_space): Mark unused arguments with ATTRIBUTE_UNUSED.
1730 (create_new_subspace): Likewise.
1733 * config/tc-hppa.c (hppa_fix_adjustable): Allow reduction of fake
1734 labels. Fix warning.
1736 2004-05-28 DJ Delorie <dj@redhat.com>
1738 * config/tc-mn10300.h (tc_fix_adjustable): Define.
1739 * config/tc-mn10300.c (mn10300_fix_adjustable): Don't adjust debug
1740 or non-merged symbols.
1742 2004-05-28 H.J. Lu <hongjiu.lu@intel.com>
1744 * config/tc-ia64.c (remove_marked_resource): Save, clear and
1745 restore the old slot when inserting srlz.i/srlz.d.
1747 2004-05-28 Andrew Stubbs <andrew.stubbs@superh.com>
1749 * Makefile.am: Regenerate dependecies.
1750 * Makefile.in: Regenerate.
1751 * config/tc-sh.c (valid_arch): Make unsigned.
1752 (preset_target_arch): Likewise.
1753 (md_begin): Use new architecture flags system.
1754 (get_specific): Likewise.
1755 (assemble_ppi): Likewise.
1756 (md_assemble): Likewise. Also fix error check for bad opcodes.
1757 (md_parse_option): Likewise. Also generate -isa values according
1758 to the table in bfd/cpu-sh.c instead of just constants. Also
1759 allow <arch>-up ISA variants.
1760 (sh_elf_final_processing): Replace if-else chain with a call to
1761 sh_find_elf_flags().
1762 * testsuite/gas/sh/arch: New directory.
1763 * testsuite/gas/sh/arch/arch.exp: New test script.
1764 * testsuite/gas/sh/arch/arch_expected.txt: New file.
1765 * testsuite/gas/sh/arch/sh.s: New file.
1766 * testsuite/gas/sh/arch/sh2.s: New file.
1767 * testsuite/gas/sh/arch/sh-dsp.s: New file.
1768 * testsuite/gas/sh/arch/sh2e.s: New file.
1769 * testsuite/gas/sh/arch/sh3-nommu.s: New file.
1770 * testsuite/gas/sh/arch/sh3.s: New file.
1771 * testsuite/gas/sh/arch/sh3-dsp.s: New file.
1772 * testsuite/gas/sh/arch/sh3e.s: New file.
1773 * testsuite/gas/sh/arch/sh4-nommu-nofpu.s: New file.
1774 * testsuite/gas/sh/arch/sh4-nofpu.s: New file.
1775 * testsuite/gas/sh/arch/sh4.s: New file.
1776 * testsuite/gas/sh/arch/sh4a-nofpu.s: New file.
1777 * testsuite/gas/sh/arch/sh4al-dsp.s: New file.
1778 * testsuite/gas/sh/arch/sh4a.s: New file.
1780 2004-05-28 Peter Barada <peter@the-baradas.com>
1782 * config/gc-m68k.c(m68k_ip): Convert mode 5 addressing
1783 with zero offset into mode 2 addressing to save a word.
1785 2004-05-27 H.J. Lu <hongjiu.lu@intel.com>
1787 * config/tc-ia64.c (ar_is_in_integer_unit): Removed.
1788 (ar_is_only_in_integer_unit): New.
1789 (ar_is_only_in_memory_unit): New.
1790 (generate_unwind_image): Silence gcc on 32bit host.
1791 (md_assemble): Use ar_is_only_in_integer_unit instead of
1792 ar_is_in_integer_unit. Check AR access.
1794 2004-05-27 Peter Barada <peter@the-baradas.com>
1796 * config/tc-m68k.c (md_begin): Sort the opcode table into
1798 (m68k_compare_opcode): New function to do the sorting.
1800 2004-05-24 Peter Barada <peter@the-baradas.com>
1802 * config/m68k-parse.y(operand): Allow for MAC/EMAC mask
1803 addressing on MIT style operands.
1804 * config/m68k-parse.y(yylex): Allow '-&' for predecrement
1806 * config/tc-m68k.c(install_operand): Comment 'G' and 'H' type
1809 2004-05-23 Alan Modra <amodra@bigpond.net.au>
1811 * expr.c (operand, operator): Don't reject '++' and '--'.
1813 2004-05-20 Richard Sandiford <rsandifo@redhat.com>
1815 * config/tc-mips.c (append_insn): Use ISA-encoded addresses in MIPS16
1818 2004-05-17 Adam Nemet <anemet@lnxw.com>
1820 * configure.in: Add ppc-*-lynxos*. Update i386-*-lynxos* to ELF.
1821 * configure: Regenerate.
1823 2004-05-13 Paul Brook <paul@codesourcery.com>
1825 * dw2gencfi.c (output_cie): Handle dwarf3 format CIE entries.
1827 2004-05-13 Joel Sherrill <joel@oarcorp.com>
1829 * configure.in (or32-*-rtems*): Switch to elf.
1830 * configure: Regenerate.
1832 2004-05-13 Nick Clifton <nickc@redhat.com>
1834 * po/fr.po: Updated French translation.
1836 2004-05-11 Nick Clifton <nickc@redhat.com>
1838 * doc/as.texinfo (Section): Document G and T flags to .section
1839 directive. Document the extra arguments that the G flag
1840 requires. Document the #tls flag.
1842 2004-05-11 H.J. Lu <hongjiu.lu@intel.com>
1844 * subsegs.c (section_symbol): Create a new section symbol if
1845 the existing one doesn't match.
1846 * symbols.c (symbol_set_bfdsym): Don't reset BFD section symbol.
1848 2004-05-07 Richard Sandiford <rsandifo@redhat.com>
1850 * config/tc-mips.c (append_insn, mips_emit_delays): Extend -mfix-vr4120
1851 to cope with VR4181A errata MD(1) and MD(4).
1853 2004-05-07 Brian Ford <ford@vss.fsi.com>
1855 * NEWS: Mention .secrel32 for pe[i]-i386.
1857 2004-05-07 Alexandre Oliva <aoliva@redhat.com>
1859 * config/tc-frv.h (MAX_MEM_FOR_RS_ALIGN_CODE): New.
1860 (HANDLE_ALIGN): New.
1862 2004-05-06 Daniel Jacobowitz <dan@debian.org>
1864 * Makefile.am (DIST_SUBDIRS): Define.
1865 * aclocal.m4: Regenerate with automake 1.8.4.
1866 * Makefile.in: Likewise.
1867 * doc/Makefile.in: Likewise.
1869 2004-05-06 David Mosberger-Tang <davidm@hpl.hp.com>
1871 * config/tc-ia64.c (dot_serialize): Declare.
1872 (dot_serialize): New function.
1873 (md_pseudo_table): Add ".serialize.data" and
1874 ".serialize.instruction" directives.
1876 2004-05-06 Nick Clifton <nickc@redhat.com>
1878 * messages (as_internal_value_out_of_range): Print a message about
1879 a value being out of range. Be consistent about whether the
1880 values are printed in decimal or hexadecimal.
1881 (as_warn_value_out_of_range): Generate a warning message about an
1883 (as_bad_value_out_of_range): Generate an error message about an
1885 * as.h: Prototype the new functions.
1886 * config/tc-alpha.c (insert_operand): Use new function.
1887 * config/tc-arc.c (arc_insert_operand): Likewise.
1888 * config/tc-mn10200.c (mn10200_insert_operand): Likewise.
1889 * config/tc-mn10300.c (mn10300_insert_operand): Likewise.
1890 * config/tc-ppc.c (ppc_insert_operand): Likewise.
1891 * config/tc-s390.c (s390_insert_operand): Likewise.
1892 * config/tc-v850.c (v850_insert_operand): Likewise.
1894 2004-05-05 Alexandre Oliva <aoliva@redhat.com>
1896 * configure.in: Set em=linux for frv-*-*linux*.
1897 * configure: Rebuilt.
1898 * config/tc-frv.h (TARGET_FORMAT): Use elf32-frvfdpic if...
1899 (frv_md_fdpic_enabled): New.
1900 * config/tc-frv.c (frv_md_fdpic_enabled): New.
1901 (DEFAULT_FDPIC): New.
1902 (frv_flags): Use DEFAULT_FDPIC.
1903 (frv_pic_flag): Likewise.
1904 (OPTION_NOPIC): New.
1905 (md_longopts): Add -mnopic.
1906 (md_parse_option): Handle it.
1907 (md_show_usage): Add -mfdpic and -mnopic.
1909 2004-05-05 Peter Barada <peter@the-baradas.com>
1911 * config/tc-m68k.c: Add find_cf_chip to print list of valid
1912 chips for invalid coldfire instructions, rename selectors
1913 for ColdFire sub-variants, add 521x,5249,547x,548x and aliases,
1914 add current_chip to track which chip is referred to(including save/restore),
1915 use current_chip to select control registers, not current_arch.
1916 (md_show_usage): Add new chips.
1917 * doc/c-m68k.texi: Document new command line switches.
1919 2004-05-05 Jakub Jelinek <jakub@redhat.com>
1921 * tc-s390.h (md_do_align, HANDLE_ALIGN): Remove.
1922 (NOP_OPCODE): Define.
1923 (s390_align_code): Remove prototype.
1924 * tc-s390.c (s390_align_code): Remove.
1926 2004-05-04 H.J. Lu <hongjiu.lu@intel.com>
1928 * config/tc-ia64.c (make_unw_section_name): Removed.
1929 (start_unwind_section): New function.
1930 (generate_unwind_image): Take const segT instead of const
1932 (dot_handlerdata): Adjusted.
1933 (dot_endp): Likewise.
1935 2004-05-02 H.J. Lu <hongjiu.lu@intel.com>
1937 * config/obj-elf.c (obj_elf_change_section): Allow the
1938 ".note.GNU-stack" section has SHF_EXECINSTR.
1940 2004-05-02 H.J. Lu <hongjiu.lu@intel.com>
1942 * config/obj-elf.c (get_section): Return bfd_boolean.
1943 (obj_elf_change_section): Call bfd_get_section_by_name_if
1944 instead of bfd_map_over_sections.
1946 2004-04-30 H.J. Lu <hongjiu.lu@intel.com>
1948 * config/obj-elf.c (get_section): New function.
1949 (obj_elf_change_section): Support multiple sections with same
1952 2004-04-30 Nick Clifton <nickc@redhat.com>
1954 * config/tc-arm.c (create_register_alias): Fix typo checking for
1955 case sensitive register aliases.
1956 (co_proc_number): Use error message string in all_reg_maps[]
1958 (cp_reg_required_here): Likewise.
1959 (fp_reg_required_here): Likewise.
1961 2004-04-29 Brian Ford <ford@vss.fsi.com>
1963 * dwarf2dbg.c (dwarf2_finish): Add SEC_DEBUGGING to section flags.
1965 2004-04-28 Chris Demetriou <cgd@broadcom.com>
1967 * config/tc-mips.c (HAVE_32BIT_ADDRESSES, append_insn, macro_build)
1968 (load_address, macro, mips_ip, md_parse_option)
1969 (mips_force_relocation, mips_validate_fix, md_apply_fix3)
1970 (s_change_sec, pic_need_relax, tc_gen_reloc): Remove all
1971 embedded-PIC handling, and update comments.
1972 (SWITCH_TABLE): Remove.
1973 * config/tc-mips.h (DIFF_EXPR_OK): Delete.
1974 (enum mips_pic_level): Remove EMBEDDED_PIC.
1975 (EXTERN_FORCE_RELOC): Remove embedded-PIC handling.
1976 (TC_FORCE_RELOCATION): Update comment.
1977 * ecoff.c (ecoff_build_lineno): Add comment about some code that
1978 might be safe to remove now that MIPS embedded-PIC is gone.
1980 2004-04-28 John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
1982 * config/obj-som.c (obj_som_init_stab_section): Add new arguments in
1983 call to obj_set_subsection_attributes.
1984 (obj_som_init_stab_section): Likewise.
1985 * config/tc-hppa.c (default_subspace_dict): Add comdat field.
1986 (pa_def_subspaces): Provide comdat default.
1987 (pa_subspace): Handle new "comdat" parameter. Set SEC_LINK_ONCE and
1988 not SEC_IS_COMMON if section is comdat, common or dup_common. Update
1989 calls to create_new_subspace and update_subspace to pass comdat flag.
1990 (create_new_subspace, update_subspace): Add new comdat argument. Use
1991 it in calls to obj_set_subsection_attributes.
1992 * doc/c-hppa.texi (.subspa, .nsubspa): Document new comdat parameter
1993 and use of comdat, common and dup_comm parameters.
1995 2004-04-26 H.J. Lu <hongjiu.lu@intel.com>
1997 * config/obj-elf.c (obj_elf_change_section): Check if the old
1998 group name is NULL before comparison.
2000 2004-04-23 Chris Demetriou <cgd@broadcom.com>
2002 * config/tc-mips.h (mips_dwarf2_addr_size): Prototype.
2004 2004-04-23 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
2006 * config/tc-mips.c (s_mipsset): Set default CPU type for .set mipsN.
2008 2004-04-23 Chris Demetriou <cgd@broadcom.com>
2010 * config/tc-mips.c (md_longopts): Remove -membedded-pic option.
2011 (OPTION_MEMBEDDED_PIC): Remove.
2012 (OPTION_TRAP, OPTION_BREAK, OPTION_EB, OPTION_EL)
2013 (OPTION_FP32, OPTION_GP32, OPTION_CONSTRUCT_FLOATS)
2014 (OPTION_NO_CONSTRUCT_FLOATS, OPTIONS_FP64, OPTION_GP64)
2015 (OPTION_RELAX_BRANCH, OPTION_NO_RELAX_BRANCH)
2016 (OPTION_ELF_BASE): Renumber.
2017 (md_parse_option): Remove OPTION_MEMBEDDED_PIC handling.
2018 (md_show_usage): Remove mention of -membedded-pic.
2019 * doc/as.texinfo: Remove mention of -membedded-pic.
2021 2004-04-23 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
2023 * config/tc-mips.h (USE_GLOBAL_POINTER_OPT): Remove.
2024 * config/tc-mips.c (RDATA_SECTION_NAME, mips_target_format): Remove
2026 (md_begin, mips_ip, md_parse_option, s_change_sec, s_option,
2027 s_abicalls, nopic_need_relax, tc_gen_reloc): Remove uses of
2028 USE_GLOBAL_POINTER_OPT.
2030 2004-04-22 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
2032 * config/tc-mips.c (macro): One more use of load_delay_nop.
2034 2004-04-22 Atsushi Nemoto <anemo@mba.ocn.ne.jp>
2036 * config/tc-mips.c (load_delay_nop): New function.
2037 (load_address, macro): Use load_delay_nop() to build a nop
2038 which can be omitted with gpr_interlocks.
2040 2004-04-22 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
2042 * config/tc-mips.c (hilo_interlocks, gpr_interlocks,
2043 cop_interlocks): Remove superfluous CPU entries.
2045 2004-04-22 Paul Brook <paul@codesourcery.com>
2047 * config/tc-arm.c (mav_parse_offset): Value must be multiple of 4.
2049 2004-04-22 Peter Barada <peter@the-baradas.com>
2051 * NEWS: Added support for EMAC instructions and MAC/EMAC
2053 * config/m68k-parse.h: Add ACC[123], ACCEXT{01,23}, MAC/EMAC
2054 scale factor tokens, trailing_ampersand to mark mask addressing
2055 for MAC/EMAC instructions.
2056 * config/m68k-parse.y: Add options_ampersand clause, '<<',
2058 (yylex): Handle '>', '<', and '&' following '+'.
2059 * config/tc-m68k.c: Set mcfmac/mcfemac on appropriate ColdFire
2060 architectures in archs[].
2061 (m68k-ip): Add '4', 'e', 'g', 'i', cases to handle mask addressing
2062 for MAC/EMAC instructions, ACC[0123], ACCEXT{01,23}, and '<<'/'>>'
2064 (m68k_ip): Handle trailing '&' on MAC/EMAC insns.
2065 (install_operand): Fix 'n' case, Add 'F', 'f', 'G', 'H', 'I', ']'
2067 Add EMAC operands to init_table[].
2069 2004-04-22 Bruno De Bus <bdebus@elis.ugent.be>
2071 * config/tc-arm.h (enum mstate): Move here, add MAP_UNDEFINED
2073 (TC_SEGMENT_INFO_TYPE): Define to enum mstate.
2074 * config/tc-arm.c (enum mstate): Delete from here.
2075 (mapping_state): Remove the static mapstate variable and instead
2076 store the state in the segment. This allows a per-section mapping
2077 state. Handle and ignore MAP_UNDEFINED states.
2078 (arm_elf_change_section): Get the current mapping state from the
2080 (s_ltorg): Set the mapping state to MAP_DATA.
2081 (arm_cleanup): Use arm_elf_change_section to get the mapping state
2082 for each pool as it is emitted.
2084 2004-04-22 Nick Clifton <nickc@redhat.com>
2086 * config/tc-arm.h: Formatting tidy ups.
2088 2004-04-20 Chris Demetriou <cgd@broadcom.com>
2090 * NEWS: Note that MIPS -membedded-pic option is deprecated.
2092 2004-04-20 DJ Delorie <dj@redhat.com>
2094 * config/tc-i386.h [TE_PE] (TC_CONS_FIX_NEW): Define.
2095 * config/tc-i386.c (md_pseudo_table) [TE_PE]: Add "secrel32".
2096 [TE_PE] (O_secrel): Define.
2097 [TE_PE] (x86_pe_cons_fix_new): New.
2098 [TE_PE] (pe_directive_secrel): Likewise.
2099 (tc_gen_reloc) [TE_PE]: Support BFD_RELOC_32_SECREL.
2101 2004-04-19 Eric Christopher <echristo@redhat.com>
2103 * config/tc-mips.c (mips_dwarf2_addr_size): Revert part
2104 of previous patch for fix in gcc.
2106 2004-04-19 Jakub Jelinek <jakub@redhat.com>
2108 * config/tc-xtensa.c (xg_assembler_literal): Fix a typo.
2110 2004-04-19 Nathan Sidwell <nathan@codesourcery.com>
2112 * read.c (do_align): Call md_flush_pending_output, if defined.
2114 2004-04-16 Alan Modra <amodra@bigpond.net.au>
2116 * expr.c (operand): Correct checks for ++ and --.
2118 2004-04-14 H.J. Lu <hongjiu.lu@intel.com>
2120 * config/tc-generic.c: Add some comments.
2122 2004-04-14 Richard Sandiford <rsandifo@redhat.com>
2124 * doc/c-mips.texi (-m{no-,}fix-vr4120): Renamed from
2125 -{no-}mfix-vr4122-bugs.
2126 * config/tc-mips.c (mips_fix_vr4120): Renamed from mips_fix_4122_bugs.
2127 (append_insn, mips_emit_delays): Update accordingly.
2128 (OPTION_FIX_VR4120, OPTION_NO_FIX_VR4120): Renamed from *VR4122.
2129 (md_longopts): Change -{no-,}mfix-vr4122-bugs to -m{no-,}fix-vr4120.
2130 (md_parse_option): Update after above changes.
2131 (md_show_usage): Add -mfix-vr4120.
2133 2004-04-13 Bob Wilson <bob.wilson@acm.org>
2135 * doc/as.texinfo (Sub-Sections): Conditionalize COFF-specific use
2136 of .section directive; add a reference to the ELF .subsection
2139 2004-04-13 Kazuhiro Inaoka <inaoka.kazuhiro@renesas.com>
2141 * config/tc-m32r.c (md_assemble): Fixed infinite loop bug
2144 2004-04-11 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
2146 * Makefile.am: Remove mips from aout targets.
2147 * Makefile.in: Regenerate.
2148 * configure.in: Remove mips-dec-bsd* target.
2149 * configure: Regenerate.
2151 2004-04-07 Alan Modra <amodra@bigpond.net.au>
2154 * config/tc-ppc.c (ppc_elf_suffix): Add valid32 and valid64 fields
2155 to struct map_bfd. Adjust MAP macro, and define MAP32, MAP64.
2156 Update "mapping". Restrict some @ modifiers to 32 bit.
2158 2004-04-01 Asgari Jinia <asgarij@kpitcummins.com>
2159 Dhananjay Deshpande <dhananjayd@kpitcummins.com>
2161 * config/tc-sh.c (dont_adjust_reloc_32): New variable.
2162 (sh_fix_adjustable): Avoid adjusting BFD_RELOC_32 when
2163 dont_adjust_reloc_32 is set.
2164 (md_longopts): Add option -renesas.
2165 (md_parse_option, md_show_usage): Likewise.
2166 * doc/c-sh.texi: Likewise.
2168 2004-04-01 Dave Korn <dk@artimi.com>
2170 * config/tc-dlx.c (md_assemble): set fx_no_overflow flag for
2171 hi16 and lo16 fixS structs.
2172 (md_assemble): generate bit_fixS for RELOC_DLX_LO16 in
2173 exactly the same way as for RELOC_DLX_REL16.
2174 (machine_ip): properly respect LO flag in the_insn and
2175 output RELOC_DLX_LO16 rather than RELOC_DLX_16.
2176 (md_apply_fix3): apply RELOC_DLX_LO16.
2178 2004-03-30 Stan Shebs <shebs@apple.com>
2180 Remove long-obsolete MPW support.
2181 * mpw-config.in, mpw-make.sed, mac-as.r: Remove files.
2182 * configure.in: Remove mention of ppc-*-mpw* config.
2183 * configure.in: Likewise.
2185 2004-03-30 Nick Clifton <nickc@redhat.com>
2187 * config/tc-arm.c (meabi_flags): Make its use conditional upon
2188 OBJ_ELF being defined.
2190 2004-03-27 Alan Modra <amodra@bigpond.net.au>
2192 * config/obj-aout.c (obj_aout_type): Remove #ifdef BFD_ASSEMBLER code.
2194 2004-03-23 Paul Brook <paul@codesourcery.com>
2196 * config/tc-arm.c (meabi_flags): New variable.
2197 (arm_parse_eabi): New function.
2198 (md_begin): Set flags for EABI v3.
2200 (arm_long_opts): Add meabi.
2201 * doc/as.texinf <ARM>: Document -meabi.
2202 * doc/c-arm.texi: Ditto.
2204 2004-03-22 Bob Wilson <bob.wilson@acm.org>
2206 * config/tc-xtensa.c (xtensa_post_relax_hook): Create literal
2207 tables even when use_literal_section flag is not set.
2209 2004-03-22 Alan Modra <amodra@bigpond.net.au>
2211 * config/tc-sh.c: Remove trailing whitespace.
2213 2004-03-22 Hans-Peter Nilsson <hp@axis.com>
2215 * doc/c-cris.texi (CRIS-Opts): Document --no-mul-bug-abort,
2216 --mul-bug-abort and the default behavior.
2217 * config/tc-cris.c (cris_insn_kind): New member CRIS_INSN_MUL.
2218 (err_for_dangerous_mul_placement): New variable.
2219 (STATE_MUL, OPTION_MULBUG_ABORT_ON, OPTION_MULBUG_ABORT_OFF): New
2221 (md_cris_relax_table): Have placeholder for STATE_MUL.
2222 (md_longopts): New options --mul-bug-abort and --no-mul-bug-abort.
2223 (cris_relax_frag) <case ENCODE_RELAX (STATE_MUL, STATE_BYTE)>: New
2225 (md_estimate_size_before_relax) <case ENCODE_RELAX (STATE_MUL,
2226 STATE_BYTE)>: Ditto.
2227 (md_convert_frag) <ENCODE_RELAX (STATE_MUL, STATE_BYTE)>: Check
2228 alignment and position of this frag, emit error message if
2230 (md_assemble): For a multiply insn and when checking it,
2231 transform the current frag into a special frag for that purpose.
2232 (md_parse_option) <case OPTION_MULBUG_ABORT_OFF, case
2233 OPTION_MULBUG_ABORT_ON>: Handle new options.
2235 2004-03-19 Bob Wilson <bob.wilson@acm.org>
2237 * config/tc-xtensa.c (mark_literal_frags): New function.
2238 (xtensa_move_literals): Call mark_literal_frags for all literal
2239 segments, including init and fini literal segments.
2240 (xtensa_post_relax_hook): Swap use of xt_insn_sec and xt_literal_sec.
2242 2004-03-19 John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
2244 * tc-hppa.c (cons_fix_new_hppa): Check for PC relative base type.
2245 (pa_comm): Set BSF_OBJECT in symbol flags.
2247 2004-03-19 Alan Modra <amodra@bigpond.net.au>
2249 * Makefile.am: Run "make dep-am".
2250 * Makefile.in: Regenerate.
2251 * doc/Makefile.in: Regenerate.
2252 * config.in: Regenerate.
2253 * po/gas.pot: Regenerate.
2255 2004-03-18 Nathan Sidwell <nathan@codesourcery.com>
2257 * read.c (read_a_source_file): Use demand_empty_rest_of_line.
2258 (demand_empty_rest_of_line): Issue an error here.
2259 (ignore_rest_of_line): Silently skip to end.
2260 (demand_copy_string): Issue an error, not warning.
2262 * config/obj-elf.c (obj_elf_section_name): Likewise.
2263 (obj_elf_section): Likewise.
2264 * config/tc-arc.c (arc_extoper): Remove bogus NULL checks.
2265 (arc_extinst): Likewise.
2266 * config/tc-ia64.c (dot_saveb): Use demand_empty_rest_of_line.
2267 (dot_spill): Likewise.
2268 (dot_unwabi): Likewise.
2269 (dot_prologue): Likewise.
2271 * expr.c (operand): Reject ++ and --.
2272 (operator): Likewise.
2274 2004-03-17 Kaz Kojima <kkojima@rr.iij4u.or.jp>
2276 * config/tc-sh.c: Include dw2gencfi.h.
2277 (sh_cfi_frame_initial_instructions): New function.
2278 (sh_regname_to_dw2regnum): Likewise.
2279 * config/tc-sh.h (DWARF2_LINE_MIN_INSN_LENGTH): Move to the end of
2281 (TARGET_USE_CFIPOP): Define.
2282 (tc_cfi_frame_initial_instructions): Likewise.
2283 (tc_regname_to_dw2regnum): Likewise.
2284 (DWARF2_DEFAULT_RETURN_COLUMN, DWARF2_CIE_DATA_ALIGNMENT): Likewise.
2285 * Makefile.am: Update dependencies.
2286 * Makefile.in: Regenerate.
2288 2004-03-17 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
2290 * configure.in: Switch sh-*-rtems* to ELF. Add sh-*-rtemscoff*.
2291 * configure: Regenerate.
2293 2004-03-12 Bob Wilson <bob.wilson@acm.org>
2295 * read.c (s_leb128): Call md_flush_pending_output.
2297 2004-03-12 Michal Ludvig <mludvig@suse.cz>
2299 * config/tc-i386.c (output_insn): Handle PadLock instructions.
2300 * config/tc-i386.h (CpuPadLock): New define.
2301 (CpuUnknownFlags): Added CpuPadLock.
2303 2004-03-07 Andreas Schwab <schwab@suse.de>
2305 * doc/c-hppa.texi (HPPA Directives): Fix typo.
2307 2004-03-07 Richard Henderson <rth@redhat.com>
2309 * dw2gencfi.c (output_cie): Align length to 4 byte boundary.
2310 (cfi_finish): Likewise for fde.
2312 2004-03-05 H.J. Lu <hongjiu.lu@intel.com>
2314 * config/tc-ia64.c (md_assemble): Properly handle NULL
2316 (ia64_handle_align): Don't abort if failed to add a stop bit.
2318 2004-03-04 H.J. Lu <hongjiu.lu@intel.com>
2320 * Makefile.in: Regenerated.
2321 * aclocal.m4: Likewise.
2322 * configure: Likewise.
2323 * doc/Makefile.in: Likewise.
2325 2004-03-03 H.J. Lu <hongjiu.lu@intel.com>
2327 * config/tc-ia64.c (dot_align): New.
2328 (ia64_do_align): Make it static.
2329 (md_pseudo_table): Use "dot_align" for "align".
2330 (ia64_md_do_align): Don't set align_frag here.
2331 (ia64_handle_align): Add a stop bit to the previous bundle if
2334 * config/tc-ia64.h (ia64_do_align): Removed.
2336 2003-03-03 Andrew Stubbs <andrew.stubbs@superh.com>
2338 * config/tc-sh.c (md_parse_option): Add -isa=sh4-nofpu and
2339 -isa=sh4-nommu-nofpu options. Adjust help messages accordingly.
2340 (sh_elf_final_processing): Output BFD type sh4_nofpu if that is
2341 the most general type or the user specifically requested it.
2342 (md_assemble): Add a new error message for when an instruction
2343 is understood, but is not allowed due to an -isa option.
2345 2004-03-02 H.J. Lu <hongjiu.lu@intel.com>
2347 * config/tc-ia64.c (align_frag): New.
2348 (md_assemble): Set the tc_frag_data field in align_frag for
2349 IA64_OPCODE_FIRST instructions.
2350 (ia64_md_do_align): Set align_frag.
2351 (ia64_handle_align): Add a stop bit if needed.
2353 * config/tc-ia64.h (TC_FRAG_TYPE): New.
2354 (TC_FRAG_INIT): New.
2356 2004-03-01 Richard Sandiford <rsandifo@redhat.com>
2358 * config/tc-frv.c (fr400_audio): New variable.
2359 (md_parse_option, md_show_usage): Add -mcpu=fr405 and -mcpu=fr450.
2360 (md_parse_option): Set fr400_audio for -mcpu=fr400 and -mcpu=fr405.
2361 (target_implements_insn_p): New function.
2362 (md_assemble): Report an error if the processor doesn't implement
2365 2004-02-27 Kazuhiro Inaoka <inaoka.kazuhiro@renesas.com>
2367 * config/tc-m32r.c (md_longopts): Added -no-bitinst option.
2368 (md_parse_option): Ditto.
2369 (OPTION_NO_SPECIAL_M32R): Added.
2370 (md_show_usage): Document it.
2371 (enable_speial_m32r): Changed a default value from 0 to 1.
2372 * doc/c-m32r.texi: Document the -no-bitinst option.
2374 2004-02-27 Nick Clifton <nickc@redhat.com>
2376 * config/tc-sh.c (get_operand): Revert previous delta.
2377 (tc_gen_reloc): Check for an unknown reloc type before processing
2380 2004-02-27 Hannes Reinecke <hare@suse.de>
2382 * config/tc-s390.c (s390_insn): Correct range check for opcode in
2383 .insn pseudo operation.
2385 2004-02-27 Anil Paranjpe <anilp1@kpitcummins.com>
2387 * config/tc-sh.c (get_operand): In case of #Imm, check has been
2388 added for wrong syntax.
2390 2004-02-26 Eric Christopher <echristo@redhat.com>
2392 * config/tc-mips.c (mips_dwarf2_addr_size): New.
2393 * config/tc-mips.h (DWARF2_ADDR_SIZE): Use.
2395 2004-02-26 Andrew Stubbs <andrew.stubbs@superh.com>
2397 * config/tc-sh.c (build_Mytes): Add REG_N_D and REG_N_B01
2398 nibble types to assembler.
2400 2004-02-25 Fred Fish <fnf@redhat.com>
2402 * config/tc-iq2000.c: Add missing \n\ in multiline string literal.
2404 2004-02-20 James E Wilson <wilson@specifixinc.com>
2406 * config/tc-ia64.c (slot_index): New arg before_relax. Use instead of
2408 (fixup_unw_records): New arg before_relax. Pass to slot_index.
2409 (ia64_estimate_size_before_relax): New.
2410 (ia64_convert_frag): Pass 0 to fixup_unw_records. Add comment.
2411 (generate_unwind_image): Pass 1 to fixup_unw_records.
2412 * config/tc-ia64.h (ia64_estimate_size_before_relax): Declare.
2413 (md_estimate_size_before_relax): Call ia64_estimate_size_before_relax.
2415 2004-02-19 Jakub Jelinek <jakub@redhat.com>
2417 * stabs.c (generate_asm_file): Avoid warning about use of
2418 uninitialized variable.
2420 2004-02-18 David Mosberger <davidm@hpl.hp.com>
2422 * config/tc-ia64.c (ia64_flush_insns): In addition to prologue,
2423 body, and endp, allow unwind records which do not have a "t"
2424 (time/instruction) field.
2426 2004-02-17 Petko Manolov <petkan@nucleusys.com>
2428 * config/tc-arm.c (do_mav_dspsc_1): Correct offset of CRn.
2429 (do_mav_dspsc_2): Likewise.
2430 Fix accumulator registers move opcodes.
2432 2004-02-13 Hannes Reinecke <hare@suse.de>
2433 Jakub Jelinek <jakub@redhat.com>
2435 * dwarf2dbg.c (get_filenum): Do not read beyond allocated memory.
2437 2004-02-10 Steve Ellcey <sje@cup.hp.com>
2439 * config/tc-ia64.h (ia64_frob_symbol): New declaration.
2440 (tc_frob_symbol): New macro definition.
2441 * config/tc-ia64.c (ia64_frob_symbol): New routine.
2443 2004-02-09 Daniel Jacobowitz <drow@mvista.com>
2445 * config/tc-arm.c (md_begin): Mark .note.gnu.arm.ident as
2448 2004-02-09 Nathan Sidwell <nathan@codesourcery.com>
2450 * read.h (IGNORE_OPCODE_CASE): Do not define. Replace with ...
2451 (TC_CASE_SENSITIVE): ... this.
2452 * read.c: Replace IGNORE_OPCODE_CASE with TC_CASE_SENSITIVE.
2453 * doc/internals.texi (TC_CASE_SENSITIVE): Document.
2455 2004-02-06 James E Wilson <wilson@specifixinc.com>
2457 * config/tc-ia64.c (dot_endp): Delete call to output_endp.
2458 (generate_unwind_image): Re-add it here.
2460 2004-02-06 Nathan Sidwell <nathan@codesourcery.com>
2462 * dwarf2dbg.c (DWARF2_ADDR_SIZE): Remove trailing ';'
2463 * read.h (SKIP_WHITESPACE): Turn into an expression.
2464 * read.c (read_a_source_file): A pseudo is removed by having a
2467 2004-02-05 James E Wilson <wilson@specifixinc.com>
2469 * config/tc-ia64.c (output_endp): New.
2470 (count_bits): Delete.
2471 (ia64_flush_insns, process_one_record, optimize_unw_records): Handle
2472 endp unwind records.
2473 (fixup_unw_records): Handle endp unwind records. Delete code for
2474 shortening prologue regions not followed by a body record.
2475 (dot_endp): Call add_unwind_entry to emit endp unwind record.
2476 * config/tc-ia64.h (unw_record_type): Add endp.
2478 2004-02-03 James E Wilson <wilson@specifixinc.com>
2480 * config/tc-ia64.c (ia64_convert_frag): Call md_number_to_chars to
2481 fill padding bytes with zeroes.
2482 (emit_one_bundle): New locals last_ptr, end_ptr. Rewrite code that
2483 sets unwind_record slot_number and slot_frag fields.
2485 2004-02-02 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
2487 * config/tc-mips.c (add_got_offset_hilo): New function.
2488 (macro): Use load_register() and add_got_offset_hilo() to load
2489 constants instead of hardcoding code sequences throughout.
2491 2004-01-28 H.J. Lu <hongjiu.lu@intel.com>
2493 * config/tc-ia64.c (emit_one_bundle): Add proper indentation.
2495 2004-01-26 Bernardo Innocenti <bernie@develer.com>
2497 * config/tc-m68k.h (EXTERN_FORCE_RELOC): Handle m68k-uclinux specially,
2499 * config/tc-m68k.c (RELAXABLE_SYMBOL): Use EXTERN_FORCE_RELOC instead
2500 of hard-coded test for TARGET_OS=elf.
2502 2004-01-24 Chris Demetriou <cgd@broadcom.com>
2504 * config/tc-mips.c (hilo_interlocks): Change definition
2505 so that MIPS32, MIPS64 and later ISAs are included, along with
2506 the already-included machines. Update comments.
2508 2004-01-23 Daniel Jacobowitz <drow@mvista.com>
2510 * config/tc-arm.c (tc_gen_reloc): Improve error message for
2511 undefined local labels.
2513 2004-01-23 Richard Sandiford <rsandifo@redhat.com>
2515 * config/tc-mips.c (load_address, macro): Update comments about
2516 NewABI GP relaxation.
2518 2004-01-23 Richard Sandiford <rsandifo@redhat.com>
2520 * config/tc-mips.c (macro_build): Remove place and counter arguments.
2521 (mips_build_lui, macro_build_ldst_constoffset): Likewise.
2522 (mips16_macro_build, macro_build_jalr): Remove counter argument.
2523 (set_at, load_register, load_address, move_register): Likewise.
2524 (load_got_offset, add_got_offset): Likewise.
2525 Update all calls and tidy accordingly.
2527 2004-01-23 Richard Sandiford <rsandifo@redhat.com>
2529 * config/tc-mips.c (RELAX_ENCODE): Remove WARN argument.
2530 (RELAX_FIRST, RELAX_SECOND): Turn into 8-bit quantities.
2531 (RELAX_USE_SECOND): Bump to 0x10000.
2532 (RELAX_SECOND_LONGER, RELAX_NOMACRO, RELAX_DELAY_SLOT): New flags.
2533 (mips_macro_warning): New variable.
2534 (md_assemble): Wrap macro expansion in macro_start() and macro_end().
2535 (s_cpload, s_cpsetup, s_cprestore, s_cpreturn): Likewise.
2536 (relax_close_frag): Set mips_macro_warning.first_frag. Adjust use
2538 (append_insn): Update mips_macro_warning.sizes.
2539 (macro_start, macro_warning, macro_end): New functions.
2540 (macro_build): Don't emit warnings here.
2541 (macro_build_lui, md_estimate_size_before_relax): ...or here.
2542 (md_convert_frag): Check for cases where one macro alternative
2543 needs a warning and the other doesn't. Emit a warning if the
2544 longer sequence was chosen.
2546 2004-01-23 Richard Sandiford <rsandifo@redhat.com>
2548 * config/tc-mips.h (tc_frag_data_type, TC_FRAG_TYPE): Remove.
2549 * config/tc-mips.c (RELAX_ENCODE): Take three arguments: the size of
2550 the first sequence, the size of the second sequence, and a flag
2551 that says whether we should warn.
2552 (RELAX_OLD, RELAX_NEW, RELAX_RELOC[123]): Delete.
2553 (RELAX_FIRST, RELAX_SECOND): New.
2554 (mips_relax): New variable.
2555 (relax_close_frag, relax_start, relax_switch, relax_end): New fns.
2556 (append_insn): Remove "place" argument. Use mips_relax.sequence
2557 rather than "place" to check whether we're expanding the second
2558 alternative of a relaxable macro. Remove redundant check for
2559 branch relaxation. If generating a normal insn, and there
2560 is not enough room in the current frag, call relax_close_frag()
2561 to close it. Update mips_relax.sizes[]. Emit fixups for the
2562 second version of a relaxable macro. Record the first relaxable
2563 fixup in mips_relax. Remove tc_gen_reloc workaround.
2564 (macro_build): Remove all uses of "place". Use mips_relax.sequence
2565 in the same way as in append_insn.
2566 (mips16_macro_build): Remove "place" argument.
2567 (macro_build_lui): As for macro_build. Don't drop the add_symbol
2568 when generating the second version of a relaxable macro.
2569 (load_got_offset, add_got_offset): New functions.
2570 (load_address, macro): Use new relaxation machinery. Remove
2571 tc_gen_reloc workarounds.
2572 (md_estimate_size_before_relax): Set RELAX_USE_SECOND if the second
2573 version of a relaxable macro is needed. Return -RELAX_SECOND if the
2574 first version is needed.
2575 (tc_gen_reloc): Remove relaxation handling.
2576 (md_convert_frag): Go through the fixups for a relaxable macro and
2577 mark those that belong to the unneeded alternative as done. If the
2578 second alternative is needed, adjust the fixup addresses to account
2579 for the deleted first alternative.
2581 2004-01-23 Richard Sandiford <rsandifo@redhat.com>
2583 * frags.h (frag_room): Declare.
2584 * frags.c (frag_room): New function.
2585 * doc/internals.texi: Document it.
2587 2004-01-22 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
2589 * config/tc-mips.c (append_insn): Don't do r3900 interlock
2590 optimization for -mtune=r3900, as this will break on other CPUs.
2592 2004-01-11 Tom Rix <tcrix@worldnet.att.net>
2594 * config/tc-m68hc11.c (build_indexed_byte): movb and movw cannot
2595 be relaxed, use fixup.
2596 (md_apply_fix3): Use 5 bit reloc from movb and movw fixup.
2598 2004-01-19 Jakub Jelinek <jakub@redhat.com>
2600 * config/tc-sparc.c (sparc_ip): Disallow %f32-%f63 for single
2603 2004-01-14 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
2605 * config/tc-mips.c (append_insn): Properly detect variant frags
2606 that preclude swapping of relaxed branches. Correctly swap
2607 instructions between frags when dealing with relaxed branches.
2609 2004-01-14 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
2611 * acinclude.m4: Quote names of macros to be defined by AC_DEFUN
2613 * aclocal.m4: Regenerate.
2614 * configure: Regenerate.
2616 2004-01-12 Anil Paranjpe <anilp1@KPITCummins.com>
2618 * config/tc-h8300.c (build_bytes): Apply relaxation to bit
2621 2004-01-12 Richard Sandiford <rsandifo@redhat.com>
2623 * config/tc-mips.c (macro_build_jalr): When adding an R_MIPS_JALR
2624 reloc, reserve space for the delay slot as well as the jalr itself.
2626 2004-01-09 Paul Brook <paul@codesourcery.com>
2628 * config/tc-arm.c (do_vfp_reg2_from_sp2): Rename from do_vfp_sp_reg2.
2629 (do_vfp_sp2_from_reg2): New function.
2631 (do_vfp_dp_from_reg2): Check return values properly.
2633 2004-01-08 Ian Lance Taylor <ian@wasabisystems.com>
2635 * config/tc-mips.c (warn_nops): Remove static variable.
2636 (macro): Remove test of warn_nops.
2637 (md_shortops): Remove 'n'.
2638 (md_parse_option): Remove 'n' case.
2639 (md_show_usage): Remove -n.
2640 * doc/as.texinfo (Overview): Remove MIPS -n option.
2641 * doc/c-mips.texi (MIPS Opts): Remove mention -n.
2642 * NEWS: Mention removal of MIPS -n option.
2644 * config/tc-mips.c (ISA_HAS_COPROC_DELAYS): Remove.
2645 (cop_interlocks): Check ISA level.
2646 (cop_mem_interlocks): Define.
2647 (reg_needs_delay): Check cop_interlocks rather than
2648 ISA_HAS_COPROC_DELAYS.
2649 (append_insn): Likewise. Use cop_mem_interlocks rather than
2650 directly checking mips_opts.isa.
2651 (mips_emit_delays): Likewise.
2653 2004-01-07 H.J. Lu <hongjiu.lu@intel.com>
2655 * config/tc-ia64.c (unwind): Move next_slot_number and
2656 next_slot_frag to ...
2657 (unw_rec_list): Here.
2658 (free_list_records): Removed.
2659 (output_unw_records): Likewise.
2660 (generate_unwind_image): Make it void.
2661 (alloc_record): Initialize next_slot_number and next_slot_frag.
2662 (slot_index): Take .org, .space and .align into account.
2663 (fixup_unw_records): Don't set slot_number to 0. Use
2664 list->next_slot_number and list->next_slot_frag instead of
2665 unwind.next_slot_number and unwind.next_slot_frag.
2666 (ia64_convert_frag): New.
2667 (generate_unwind_image): Generate a rs_machine_dependent frag
2669 (emit_one_bundle): Use list->next_slot_number and
2670 list->next_slot_frag instead of unwind.next_slot_number and
2671 unwind.next_slot_frag.
2673 * config/tc-ia64.h (md_convert_frag): Defined as
2675 (md_estimate_size_before_relax): Defined as (f)->fr_var.
2677 2004-01-06 Alexandre Oliva <aoliva@redhat.com>
2679 2003-12-19 Alexandre Oliva <aoliva@redhat.com>
2680 * config/tc-frv.h (md_apply_fix3): Don't define.
2681 * config/tc-frv.c (md_apply_fix3): New. Shift/truncate %hi/%lo
2683 * config/tc-frv.h (TC_FORCE_RELOCATION_SUB_LOCAL): Define.
2684 2003-10-07 Alexandre Oliva <aoliva@redhat.com>
2685 * config/tc-frv.c (line_separator_chars): Add `!'.
2686 2003-09-19 Alexandre Oliva <aoliva@redhat.com>
2687 * config/tc-frv.c (md_assemble): Clear insn upfront.
2688 2003-09-18 Alexandre Oliva <aoliva@redhat.com>
2689 * config/tc-frv.c (OPTION_FDPIC): New macro.
2690 (md_longopts): Add mfdpic.
2691 (md_parse_option): Handle it.
2692 2003-08-04 Alexandre Oliva <aoliva@redhat.com>
2693 * config/tc-frv.c (md_cgen_lookup_reloc) <FRV_OPERAND_D12,
2694 FRV_OPERAND_S12>: Use reloc type encoded in fix-up.
2695 (frv_pic_ptr): Parse funcdesc.
2697 2004-01-05 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
2699 * doc/as.texinfo: Let texi2pod parse asconfig.texi and
2700 gasver.texi. Remove duplicate symbol definitions for texi2pod.
2702 2004-01-05 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
2704 * Makefile.am (Makefile): Move the dependency on
2705 $(BFDDIR)/configure.in to...
2706 (CONFIG_STATUS_DEPENDENCIES): ... here.
2707 (AUTOMAKE_OPTIONS): Require automake 1.8.
2708 * Makefile.in: Regenerate.
2709 * doc/Makefile.am (BASEDIR, BFDDIR): Define.
2710 (CONFIG_STATUS_DEPENDENCIES): Add a dependency on
2711 $(BFDDIR)/configure.in here as well.
2712 * doc/Makefile.in: Regenerate.
2714 2004-01-05 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
2716 * Makefile.am (install, install-info, RECURSIVE_TARGETS): Remove.
2717 * Makefile.in: Regenerate.
2718 * aclocal.m4: Regenerate.
2719 * doc/Makefile.am (install, install-info): Remove.
2720 (install-data-local): A new hook for install-info.
2721 (AUTOMAKE_OPTIONS): Require automake 1.8.
2722 * doc/Makefile.in: Regenerate.
2724 2004-01-02 Nutan Singh <nutan@kpitcummins.com>
2726 * doc/c-sh.texi: Update description about floating point behavior
2729 2004-01-02 Bernardo Innocenti <bernie@develer.com>
2731 * configure.in: Add m68k-uClinux target.
2732 * configure: Regenerate.
2734 For older changes see ChangeLog-0203
2740 version-control: never