gas/ChangeLog

   1 2011-08-04  Alan Modra  <amodra@gmail.com>
   2
   3         * write.c (write_object_file): Call set_symtab even if we had
   4         errors.
   5
   6 2011-08-04  Tristan Gingold  <gingold@adacore.com>
   7
   8         * config/obj-elf.c (obj_elf_section): Do not free name.
   9
  10 2011-08-03  James Greenhalgh  <james.greenhalgh@arm.com>
  11
  12         * config/tc-arm.c (do_t_strexbh): New.
  13         (insns): Update accordingly.
  14
  15 2011-08-01  H.J. Lu  <hongjiu.lu@intel.com>
  16
  17         PR ld/13048
  18         * config/tc-i386.c (handle_quad): Removed.
  19         (md_pseudo_table): Remove "quad".
  20         (tc_gen_reloc): Don't check BFD_RELOC_64 for disallow_64bit_reloc.
  21         (x86_dwarf2_addr_size): New.
  22
  23         * config/tc-i386.h (x86_dwarf2_addr_size): New.
  24         (DWARF2_ADDR_SIZE): Likewise.
  25
  26 2011-08-01  Nick Clifton  <nickc@redhat.com>
  27
  28         PR ld/12974
  29         * config/tc-arm.c (literal_pool): Add locs field.
  30         (add_to_lit_pool): Initialise the locs entry for the new literal.
  31         (s_ltorg): Generate a DWARF2 line number entry for each emitted
  32         literal pool entry.
  33
  34 2011-08-01  Tristan Gingold  <gingold@adacore.com>
  35
  36         * write.c (write_relocs): Fix -Wshadow in DEBUG3 and DEBUG4.
  37
  38 2011-08-01  Tristan Gingold  <gingold@adacore.com>
  39
  40         * frags.c (frag_grow): Simplify the code.
  41
  42 2011-07-30  Richard Sandiford  <rdsandiford@googlemail.com>
  43
  44         * config/tc-mips.c (nops_for_vr4130): Revert previous commit.
  45
  46 2011-07-29  Maciej W. Rozycki  <macro@codesourcery.com>
  47
  48         * config/tc-mips.c: Adjust comments throughout.
  49         (reglist_lookup): Reshape code.
  50         (jmp_reloc_p, jalr_reloc_p): Reformat.
  51         (got16_reloc_p, hi16_reloc_p, lo16_reloc_p): Handle microMIPS
  52         relocations.
  53         (gpr_mod_mask): Remove unused variable.
  54         (gpr_read_mask, gpr_write_mask): Reshape code.
  55         (fpr_read_mask, fpr_write_mask): Likewise.
  56         (nops_for_vr4130): Ensure non-microMIPS mode.
  57         (can_swap_branch_p): Correct pinfo2 reference.  Reshape code.
  58         (append_insn): Skip Loongson 2F workaround in MIPS16 mode.  Use
  59         the outermost operator of a compound relocation to determines
  60         the relocated field.  Fix formatting.
  61         (md_convert_frag): Reshape code.
  62
  63 2011-07-29  Tristan Gingold  <gingold@adacore.com>
  64
  65         * frags.c (frag_var_init): New function.
  66         (frag_var): Call frag_var_init to initialize.
  67         (frag_variant): Ditto.
  68
  69 2011-07-27  Nathan Sidwell  <nathan@codesourcery.com>
  70
  71         * dwarf2dbg.c (out_debug_line): Ignore non-normal segments, with a
  72         warning.
  73         * doc/as.texinfo (Offset): Document .offset directive.
  74
  75 2011-07-27  Tristan Gingold  <gingold@adacore.com>
  76
  77         * frags.c (frag_grow): Revert previous patch.
  78
  79 2011-07-26  Kazuhiro Inaoka  <kazuhiro.inaoka.ud@renesas.com>
  80
  81         * config/tc-rx.c (md_convert_frag): Fix encoding of beq.a
  82         synthetic instruction.
  83
  84 2011-07-25  Tristan Gingold  <gingold@adacore.com>
  85
  86         * frags.c (frag_grow): Simplify the code.
  87
  88 2011-07-24  Maciej W. Rozycki  <macro@codesourcery.com>
  89             Chao-ying Fu  <fu@mips.com>
  90             Richard Sandiford  <rdsandiford@googlemail.com>
  91
  92         * config/tc-mips.h (mips_segment_info): Add one bit for
  93         microMIPS.
  94         (TC_LABEL_IS_LOCAL): New macro.
  95         (mips_label_is_local): New prototype.
  96         * config/tc-mips.c (S0, S7): New macros.
  97         (emit_branch_likely_macro): New variable.
  98         (mips_set_options): Add micromips.
  99         (mips_opts): Initialise micromips to -1.
 100         (file_ase_micromips): New variable.
 101         (CPU_HAS_MICROMIPS): New macro.
 102         (hilo_interlocks): Set for microMIPS too.
 103         (gpr_interlocks): Likewise.
 104         (cop_interlocks): Likewise.
 105         (cop_mem_interlocks): Likewise.
 106         (HAVE_CODE_COMPRESSION): New macro.
 107         (micromips_op_hash): New variable.
 108         (micromips_nop16_insn, micromips_nop32_insn): New variables.
 109         (NOP_INSN): Handle microMIPS ASE.
 110         (mips32_to_micromips_reg_b_map): New macro.
 111         (mips32_to_micromips_reg_c_map): Likewise.
 112         (mips32_to_micromips_reg_d_map): Likewise.
 113         (mips32_to_micromips_reg_e_map): Likewise.
 114         (mips32_to_micromips_reg_f_map): Likewise.
 115         (mips32_to_micromips_reg_g_map): Likewise.
 116         (mips32_to_micromips_reg_l_map): Likewise.
 117         (mips32_to_micromips_reg_n_map): Likewise.
 118         (mips32_to_micromips_reg_h_map): New variable.
 119         (mips32_to_micromips_reg_m_map): Likewise.
 120         (mips32_to_micromips_reg_q_map): Likewise.
 121         (micromips_to_32_reg_h_map): New variable.
 122         (micromips_to_32_reg_i_map): Likewise.
 123         (micromips_to_32_reg_m_map): Likewise.
 124         (micromips_to_32_reg_q_map): Likewise.
 125         (micromips_to_32_reg_b_map): New macro.
 126         (micromips_to_32_reg_c_map): Likewise.
 127         (micromips_to_32_reg_d_map): Likewise.
 128         (micromips_to_32_reg_e_map): Likewise.
 129         (micromips_to_32_reg_f_map): Likewise.
 130         (micromips_to_32_reg_g_map): Likewise.
 131         (micromips_to_32_reg_l_map): Likewise.
 132         (micromips_to_32_reg_n_map): Likewise.
 133         (micromips_imm_b_map, micromips_imm_c_map): New macros.
 134         (RELAX_DELAY_SLOT_16BIT): New macro.
 135         (RELAX_DELAY_SLOT_SIZE_FIRST): Likewise.
 136         (RELAX_DELAY_SLOT_SIZE_SECOND): Likewise.
 137         (RELAX_MICROMIPS_ENCODE, RELAX_MICROMIPS_P): New macros.
 138         (RELAX_MICROMIPS_TYPE, RELAX_MICROMIPS_AT): Likewise.
 139         (RELAX_MICROMIPS_U16BIT, RELAX_MICROMIPS_UNCOND): Likewise.
 140         (RELAX_MICROMIPS_COMPACT, RELAX_MICROMIPS_LINK): Likewise.
 141         (RELAX_MICROMIPS_RELAX32, RELAX_MICROMIPS_TOOFAR16): Likewise.
 142         (RELAX_MICROMIPS_MARK_TOOFAR16): Likewise.
 143         (RELAX_MICROMIPS_CLEAR_TOOFAR16): Likewise.
 144         (RELAX_MICROMIPS_TOOFAR32): Likewise.
 145         (RELAX_MICROMIPS_MARK_TOOFAR32): Likewise.
 146         (RELAX_MICROMIPS_CLEAR_TOOFAR32): Likewise.
 147         (INSERT_OPERAND, EXTRACT_OPERAND): Handle microMIPS ASE.
 148         (mips_macro_warning): Add delay_slot_16bit_p, delay_slot_32bit_p,
 149         fsize and insns.
 150         (mips_mark_labels): New function.
 151         (mips16_small, mips16_ext): Remove variables, replacing with...
 152         (forced_insn_size): ... this.
 153         (append_insn, mips16_ip): Update accordingly.
 154         (micromips_insn_length): New function.
 155         (insn_length): Return the length of microMIPS instructions.
 156         (mips_record_mips16_mode): Rename to...
 157         (mips_record_compressed_mode): ... this.  Handle microMIPS ASE.
 158         (install_insn): Handle microMIPS ASE.
 159         (reglist_lookup): New function.
 160         (is_size_valid, is_delay_slot_valid): Likewise.
 161         (md_begin): Handle microMIPS ASE.
 162         (md_assemble): Likewise.  Update for append_insn interface change.
 163         (micromips_reloc_p): New function.
 164         (got16_reloc_p): Handle microMIPS ASE.
 165         (hi16_reloc_p): Likewise.
 166         (lo16_reloc_p): Likewise.
 167         (jmp_reloc_p): New function.
 168         (jalr_reloc_p): Likewise.
 169         (matching_lo_reloc): Handle microMIPS ASE.
 170         (insn_uses_reg, reg_needs_delay): Likewise.
 171         (mips_move_labels): Likewise.
 172         (mips16_mark_labels): Rename to...
 173         (mips_compressed_mark_labels): ... this.  Handle microMIPS ASE.
 174         (gpr_mod_mask): New function.
 175         (gpr_read_mask, gpr_write_mask): Handle microMIPS ASE.
 176         (fpr_read_mask, fpr_write_mask): Likewise.
 177         (insns_between, nops_for_vr4130, nops_for_insn): Likewise.
 178         (fix_loongson2f_nop, fix_loongson2f_jump): Likewise.
 179         (MICROMIPS_LABEL_CHAR): New macro.
 180         (micromips_target_label, micromips_target_name): New variables.
 181         (micromips_label_name, micromips_label_expr): New functions.
 182         (micromips_label_inc, micromips_add_label): Likewise.
 183         (mips_label_is_local): Likewise.
 184         (micromips_map_reloc): Likewise.
 185         (can_swap_branch_p): Handle microMIPS ASE.
 186         (append_insn): Add expansionp argument.  Handle microMIPS ASE.
 187         (start_noreorder, end_noreorder): Handle microMIPS ASE.
 188         (macro_start, macro_warning, macro_end): Likewise.
 189         (brk_fmt, cop12_fmt, jalr_fmt, lui_fmt): New variables.
 190         (mem12_fmt, mfhl_fmt, shft_fmt, trap_fmt): Likewise.
 191         (BRK_FMT, COP12_FMT, JALR_FMT, LUI_FMT): New macros.
 192         (MEM12_FMT, MFHL_FMT, SHFT_FMT, TRAP_FMT): Likewise.
 193         (macro_build): Handle microMIPS ASE.  Update for append_insn
 194         interface change.
 195         (mips16_macro_build): Update for append_insn interface change.
 196         (macro_build_jalr): Handle microMIPS ASE.
 197         (macro_build_lui): Likewise.  Simplify.
 198         (load_register): Handle microMIPS ASE.
 199         (load_address): Likewise.
 200         (move_register): Likewise.
 201         (macro_build_branch_likely): New function.
 202         (macro_build_branch_ccl): Likewise.
 203         (macro_build_branch_rs): Likewise.
 204         (macro_build_branch_rsrt): Likewise.
 205         (macro): Handle microMIPS ASE.
 206         (validate_micromips_insn): New function.
 207         (expr_const_in_range): Likewise.
 208         (mips_ip): Handle microMIPS ASE.
 209         (options): Add OPTION_MICROMIPS and OPTION_NO_MICROMIPS.
 210         (md_longopts): Add mmicromips and mno-micromips.
 211         (md_parse_option): Handle OPTION_MICROMIPS and
 212         OPTION_NO_MICROMIPS.
 213         (mips_after_parse_args): Handle microMIPS ASE.
 214         (md_pcrel_from): Handle microMIPS relocations.
 215         (mips_force_relocation): Likewise.
 216         (md_apply_fix): Likewise.
 217         (mips_align): Handle microMIPS ASE.
 218         (s_mipsset): Likewise.
 219         (s_cpload, s_cpsetup, s_cpreturn): Use relocation wrappers.
 220         (s_dtprel_internal): Likewise.
 221         (s_gpword, s_gpdword): Likewise.
 222         (s_insn): Handle microMIPS ASE.
 223         (s_mips_stab): Likewise.
 224         (relaxed_micromips_32bit_branch_length): New function.
 225         (relaxed_micromips_16bit_branch_length): New function.
 226         (md_estimate_size_before_relax): Handle microMIPS ASE.
 227         (mips_fix_adjustable): Likewise.
 228         (tc_gen_reloc): Handle microMIPS relocations.
 229         (mips_relax_frag): Handle microMIPS ASE.
 230         (md_convert_frag): Likewise.
 231         (mips_frob_file_after_relocs): Likewise.
 232         (mips_elf_final_processing): Likewise.
 233         (mips_nop_opcode): Likewise.
 234         (mips_handle_align): Likewise.
 235         (md_show_usage): Handle microMIPS options.
 236         * symbols.c (TC_LABEL_IS_LOCAL): New macro.
 237         (S_IS_LOCAL): Add a TC_LABEL_IS_LOCAL check.
 238
 239         * doc/as.texinfo (Target MIPS options): Add -mmicromips and
 240         -mno-micromips.
 241         (-mmicromips, -mno-micromips): New options.
 242         * doc/c-mips.texi (-mmicromips, -mno-micromips): New options.
 243         (MIPS ISA): Document .set micromips and .set nomicromips.
 244         (MIPS insn): Update for microMIPS support.
 245
 246 2011-07-24  Maciej W. Rozycki  <macro@codesourcery.com>
 247
 248         * config/tc-mips.c (mips_ip): Make a copy of the instruction's
 249         mnemonic and use it for further processing.
 250
 251 2011-07-24  Maciej W. Rozycki  <macro@codesourcery.com>
 252
 253         * config/tc-mips.c (can_swap_branch_p): Adjust for the rename of
 254         INSN_TRAP to INSN_NO_DELAY_SLOT.  Remove the check for INSN_SYNC
 255         as well as explicit checks for ERET and DERET when scheduling
 256         branch delay slots.
 257
 258 2011-07-22  H.J. Lu  <hongjiu.lu@intel.com>
 259
 260         * config/tc-i386.c (cpu_arch): Add k1om.
 261         (i386_align_code): Handle PROCESSOR_K1OM.
 262         (check_cpu_arch_compatible): Check EM_K1OM.
 263         (i386_arch): Handle Intel K1OM.
 264         (i386_mach): Return bfd_mach_k1om for Intel K1OM.
 265         (i386_target_format): Return ELF_TARGET_K1OM_FORMAT for Intel
 266         K1OM.
 267
 268         * config/tc-i386.h (ELF_TARGET_K1OM_FORMAT): New.
 269         (processor_type): Add PROCESSOR_K1OM.
 270
 271         * doc/c-i386.texi: Document k1om.
 272
 273 2011-07-18  H.J. Lu  <hongjiu.lu@intel.com>
 274
 275         * doc/c-i386.texi: Fix a typo.
 276
 277 2011-07-06  Aurelien Jarno  <aurelien@aurel32.net>
 278
 279         * config/tc-mips.c (append_insn): delete prev_pinfo2 and pinfo2.
 280
 281 2011-07-04  Richard Sandiford  <rdsandiford@googlemail.com>
 282
 283         * config/tc-mips.c (gpr_read_mask, gpr_write_mask): Fix handling
 284         of register 0.
 285
 286 2011-07-04  Maciej W. Rozycki  <macro@codesourcery.com>
 287
 288         * config/tc-mips.c (append_insn): Make sure DWARF-2 location
 289         information is properly adjusted for branches that get swapped.
 290
 291 2011-07-03  Samuel Thibault  <samuel.thibault@gnu.org>
 292             Thomas Schwinge  <thomas@schwinge.name>
 293
 294         PR binutils/12913
 295         * config/obj-elf.c (obj_elf_type): Use ELFOSABI_GNU name instead of
 296         ELFOSABI_LINUX alias.
 297         * config/tc-ia64.c: Likewise.
 298
 299 2011-06-30  Paul Carroll  <pcarroll@codesourcery.com>
 300
 301         * config/tc-arm.c (do_t_add_sub): Only allow LSL shifts of less
 302         than 4 in Thumb mode.
 303
 304 2011-06-30  Nick Clifton  <nickc@redhat.com>
 305
 306         PR gas/12848
 307         * config/tc-arm.c (BAD_RANGE): New error message define.
 308         (md_apply_fix): Use it.
 309         Fix range check for thumb branch instructions.
 310
 311 2011-06-29  Richard Sandiford  <rdsandiford@googlemail.com>
 312
 313         * config/tc-mips.c (append_method): New enum.
 314         (can_swap_branch_p, get_append_method): New functions.
 315         (append_insn): Use get_append_method to decide how the instruction
 316         should be added.
 317
 318 2011-06-29  Richard Sandiford  <rdsandiford@googlemail.com>
 319
 320         * config/tc-mips.c (append_insn): Remove bogus goto.
 321
 322 2011-06-29  Richard Sandiford  <rdsandiford@googlemail.com>
 323
 324         * config/tc-mips.c (append_insn): Always clear the history after an
 325         unconditional branch.
 326
 327 2011-06-29  Richard Sandiford  <rdsandiford@googlemail.com>
 328
 329         * config/tc-mips.c (find_altered_mips16_opcode): New function.
 330         (append_insn): Use it.
 331
 332 2011-06-29  Richard Sandiford  <rdsandiford@googlemail.com>
 333
 334         * config/tc-mips.c (insn_uses_reg): Delete.
 335         (gpr_read_mask, gpr_write_mask): New functions.
 336         (fpr_read_mask, fpr_write_mask): Likewise.
 337         (insns_between, nops_for_vr4130, append_insn): Use them.
 338
 339 2011-06-29  Richard Sandiford  <rdsandiford@googlemail.com>
 340
 341         * config/tc-mips.c (md_mips_end): Call mips_emit_delays.
 342
 343 2011-06-29  Dave Martin  <dave.martin@linaro.org>
 344
 345         PR gas/12931
 346         * config/tc-arm.c (mapping_state): When changing to ARM or THUMB
 347         state set the minimum required alignment of the section.
 348
 349 2011-06-29  Tristan Gingold  <gingold@adacore.com>
 350
 351         * config/tc-i386.c (i386_mach): Convert to ISO-C.
 352         (md_begin, pe_directive_secrel, md_estimate_size_before_relax): Ditto.
 353         (md_convert_frag, md_apply_fix, md_undefined_symbol): Ditto.
 354         (md_section_align, tc_gen_reloc): Ditto.
 355
 356 2011-06-28  Tristan Gingold  <gingold@adacore.com>
 357
 358         * config/tc-alpha.c (s_alpha_pdesc): Fix indentation. Do not
 359         generate dummy fix.
 360
 361 2011-06-28  Tristan Gingold  <gingold@adacore.com>
 362
 363         * config/tc-alpha.c (load_expression): Use alloca instead of xmalloc.
 364         (emit_jsrjmp): Ditto.
 365         (tc_gen_reloc): Ditto.
 366
 367 2011-06-28  Tristan Gingold  <gingold@adacore.com>
 368
 369         * config/tc-alpha.c (alpha_evax_proc_hash): Remove.
 370         (alpha_evax_proc_data): New variable.
 371         (s_alpha_ent): Prevent nested function.  Remove has_insert call.
 372         (s_alpha_pdesc): Do not call demand_empty_rest_of_line in case of
 373         error.  Do not search in the hash table.  Check if match with .ent.
 374         (s_alpha_name): Remove unused variable.
 375         (md_begin): Remove initialization of alpha_evax_proc_hash.
 376
 377 2011-06-27  Tristan Gingold  <gingold@adacore.com>
 378
 379         * config/tc-alpha.c (add_to_link_pool): Remove basesym parameter.
 380         Locally declare basesym.  Add comments.  Do not set literal_pool_size.
 381         (load_expression): Adjust call to add_to_link_pool.
 382         (s_alpha_pdesc): Define pdesc symbol using dot.
 383         Do not set literal_pool_size.
 384         (s_alpha_end): Use NULL instead of 0.
 385
 386 2011-06-27  Tristan Gingold  <gingold@adacore.com>
 387
 388         * config/obj-evax.c (evax_frob_file_before_adjust): Add comments.
 389         Fix style.
 390         * config/obj-evax.h (struct alpha_linkage_fixups): Remove seg
 391         field.  Add comments.
 392         (obj_symbol_type, object_headers, OBJ_SYMFIELD_TYPE): Remove
 393
 394 2011-06-26  Richard Sandiford  <rdsandiford@googlemail.com>
 395
 396         * config/tc-mips.c (fix_24k_record_store_info): If the previous
 397         instruction was a store, and the next instructions are unknown,
 398         assume the worst.
 399
 400 2011-06-25  Richard Sandiford  <rdsandiford@googlemail.com>
 401
 402         PR gas/12915
 403         * config/tc-mips.c (nops_for_vr4130, nops_for_24k, nops_for_insn)
 404         (nops_for_sequence, nops_for_insn_or_target): Add ignore parameters.
 405         (mips_emit_delays, start_noreorder): Update accordingly.
 406         (append_insn): Likewise.  Revert original fix for this PR
 407         and use the ignore parameter instead.
 408
 409 2011-06-24  Tristan Gingold  <gingold@adacore.com>
 410
 411         PR gas/11625
 412         * config/obj-evax.c (evax_frob_symbol): Use as_bad instead of abort.
 413
 414 2011-06-24  Tristan Gingold  <gingold@adacore.com>
 415
 416         * config/tc-alpha.c (add_to_link_pool): Remove useless offset
 417         variable.  Fix style.
 418
 419 2011-06-23  Richard Sandiford  <rdsandiford@googlemail.com>
 420
 421         PR gas/12915
 422         * config/tc-mips.c (append_insn): Only consider hazards between the
 423         pre-noreorder block and ip.
 424
 425 2011-06-21  Sameera Deshpande  <sameera.deshpande@arm.com>
 426
 427         * config/tc-arm.c (vfp_conv): Add check on range of immediate operand
 428         in vcvt instruction between floating-point and fixed-point.
 429         (operand_parse_code): Add "OP_oI32z".
 430         (parse_operands): OP_oI32z case added.
 431
 432 2011-06-20  H.J. Lu  <hongjiu.lu@intel.com>
 433
 434         * configure.tgt: Revert x32 change.
 435
 436 2011-06-20  Nick Clifton  <nickc@redhat.com>
 437
 438         * doc/Makefile.am: (CPU_DOCS): Add c-xstormy16.texi.
 439         * doc/Makefile.in: Regenerate.
 440         * doc/all.texi: Set XSTORMY16.
 441         * doc/c-xstormy16.texi: New file.
 442
 443 2011-06-19  H.J. Lu  <hongjiu.lu@intel.com>
 444
 445         * configure.tgt: Support x32.
 446
 447 2011-06-15  Nick Clifton  <nickc@redhat.com>
 448
 449         * NEWS: Mention addition of TILEPRO and TIKE-Gx support.
 450
 451 2011-06-14  Tristan Gingold  <gingold@adacore.com>
 452
 453         * config/tc-ppc.h (struct ppc_tc_sy): Complete comment on within.
 454         (tc_new_dot_label): Define.
 455         (ppc_new_dot_label): Declare.
 456         * config/tc-ppc.c (ppc_frob_label): Set within target field.
 457         (ppc_fix_adjustable): Use this field to adjust the reloc.
 458         (ppc_new_dot_label): New function.
 459
 460 2011-06-14  Alan Modra  <amodra@gmail.com>
 461
 462         * po/POTFILES.in: Regenerate.
 463
 464 2011-06-13  Walter Lee  <walt@tilera.com>
 465
 466         * Makefile.am (TARGET_CPU_CFILES): Add config/tc-tilegx.c and
 467         config/tc-tilepro.c.
 468         (TARGET_CPU_HFILES): Add config/tc-tilegx.h and
 469         config/tc-tilepro.h.
 470         * Makefile.in: Regenerate.
 471         * configure.tgt (tilepro-*-*): New.
 472         (tilegx-*-*): Likewise.
 473         * config/tc-tilegx.c: New file.
 474         * config/tc-tilegx.h: Likewise.
 475         * config/tc-tilepro.h: Likewise.
 476         * config/tc-tilepro.c: Likewise.
 477         * doc/Makefile.am (CPU_DOCS): Add c-tilegx.texi and
 478         c-tilepro.texi.
 479         * doc/Makefile.in: Regenerate.
 480         * doc/all.texi (TILEGX): Define.
 481         (TILEPRO): Define.
 482         * doc/as.texinfo: Add Tile-Gx and TILEPro documentation.  Include
 483         c-tilegx.texi and c-tilepro.texi.
 484         * doc/c-tilegx.texi: New.
 485         * doc/c-tilepro.texi: New.
 486
 487 2011-06-13  Nick Clifton  <nickc@redhat.com>
 488
 489         PR gas/12854
 490         * config/tc-arm.c (do_shift): Do not allow shift operations at the
 491         end of a register based shift insn.
 492         (do_t_shift): Likewise.
 493
 494 2011-06-13  Nick Clifton  <nickc@redhat.com>
 495
 496         * config/tc-score.c (s3_my_get_expression): Delete unused local
 497         variable 'seg'.
 498         (s3_do_ldst_insn): Delete unused local variable 'strbak'.
 499         (s3_do16_ldst_insn): Delete unused local variable 'temp'.
 500         (s3_do_macro_bcmp): Zero inst_expand array.
 501         (s3_do_macro_bcmpz): Likewise.
 502         (s3_s_score_end): Delete unused local variable 'dot'.
 503         (s3_gen_reloc): Delete unused local variables 'f', 's', and 'e'.
 504         * config/tc-score7.c (s7_my_get_expression): Delete unused local
 505         variable 'seg'.
 506         (s7_do_ldst_insn): Delete unused local variable 'strbak'.
 507         (s7_b32_relax_to_b16): Delete unused local variables 'r_old' and
 508         'r_new'.
 509         (s7_s_score_end): Delete unused local variable 'dot'.
 510         (s7_relax_frag): Delete unused local variable 'relax_size'.
 511         (s7_gen_reloc): Delete unused local variables 'f', 's', and 'e'.
 512
 513 2011-06-10  H.J. Lu  <hongjiu.lu@intel.com>
 514
 515         AVX Programming Reference (June, 2011)
 516         * config/tc-i386.c (i386_error): Add invalid_vsib_address and
 517         unsupported_vector_index_register.
 518         (cpu_arch): Add .avx2, .bmi2, .lzcnt and .invpcid.
 519         (check_VecOperands): New.
 520         (match_template): Call check_VecOperands.  Handle
 521         invalid_vsib_address and unsupported_vector_index_register.
 522         (build_modrm_byte): Support VecSIB.  Check register-only source
 523         operand when two source operands are swapped.
 524         (i386_index_check): Allow Xmm/Ymm index registers.
 525
 526         * doc/c-i386.texi: Document avx2/.avx2, bmi2/.bmi2, lzcnt/.lzcnt
 527         and invpcid./invpcid.
 528
 529 2011-06-09  Nick Clifton  <nickc@redhat.com>
 530
 531         PR gas/12861
 532         * config/tc-cr16.c (tc_gen_reloc): Remove unused local variable
 533         code.
 534         (check_cinv_options): Remove unused local variables.  Make
 535         function void.
 536         (md_assemble): Remove unused local variable.
 537
 538 2011-06-09  James Greenhalgh  <james.greenhalgh@arm.com>
 539
 540         * config/tc-arm.c (do_ldrd): Warn in unpredictable cases.
 541
 542 2011-06-03  Arnaud Patard  <arnaud.patard@rtp-net.org>
 543
 544         PR gas/12698
 545         * config/tc-arm.c (parse_psr): Set m_profile to false when
 546         assembling for any architecture.
 547
 548 2011-06-02  Jie Zhang jie@codesourcery.com
 549             Nathan Sidwell nathan@codesourcery.com
 550
 551         * config/tc-arm.c (parse_address_main): Handle -0 offsets.
 552         (encode_arm_addr_mode_2): Set default sign of zero here ...
 553         (encode_arm_addr_mode_3): ... and here.
 554         (encode_arm_cp_address): ... and here.
 555         (md_apply_fix): Use default sign of zero here.
 556
 557 2011-06-02  Nick Clifton  <nickc@redhat.com>
 558
 559         * as.c: Fix spelling typo.
 560         * read.c: Likewise.
 561         * config/tc-ppc.c: Likewise.
 562         * po/gas.pit: Regenerate.
 563
 564 2011-05-31  Paul Brook  <paul@codesourcery.com>
 565
 566         * config/tc-arm.c (arm_cpus): Add Cortex-R5.
 567         (arm_extensions): Allow idiv on ARMv7-R.
 568         * doc/c-arm.text: Update idiv extension restrictions.
 569
 570 2011-05-31  Paul Brook  <paul@codesourcery.com>
 571
 572         * config/tc-arm.c (arm_force_relocation): Resolve all pc-relative
 573         loads.
 574
 575 2011-05-31  Paul Brook  <paul@codesourcery.com>
 576
 577         * config/tc-arm.c (do_t_branch): Avoid relaxing branches to constant
 578         addresses.
 579
 580 2011-05-31  Paul Brook  <paul@codesourcery.com>
 581         Nathan Sidwell  <nathan@codesourcery.com>
 582
 583         * config/tc-arm.c (fix_new_arm): Create an absolute symbol for
 584         pc-relative fixes to constants.
 585         * config/tc-arm.h (TC_FORCE_RELOCATATION_ABS): Define.
 586
 587 2011-05-27  Nick Clifton  <nickc@redhat.com>
 588
 589         * config/tc-s390.c (md_begin): Remove unused variable dup_insn.
 590
 591 2011-05-24  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>
 592
 593         * config/tc-s390.c (md_gather_operands): Fix check for floating
 594         register pair operands.
 595
 596 2011-05-24  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>
 597
 598         * config/tc-s390.c (md_gather_operands): Emit an error for odd
 599         numbered registers used as register pair operand.
 600
 601 2011-05-23  Nick Clifton  <nickc@redhat.com>
 602
 603         * config/tc-v850.h (TC_FX_SIZE_SLACK): Define.
 604
 605 2011-05-20  Bernd Schmidt  <bernds@codesourcery.com>
 606
 607         * config/tc-tic6x.c (tic6x_operators): Add "pcr_offset".
 608         (tic6x_parse_name): Handle it.
 609         (tic6x_fix_new_exp): Handle O_pcr_offset.
 610         (tic6x_fix_adjustable): Return 0 for the new relocs.
 611         (md_apply_fix): Handle them.
 612         (tc_gen_reloc): Likewise.
 613         * config/tc-tic6x.h (tic6x_fix_info): Add a fix_subsy member.
 614
 615 2011-05-18  Nick Clifton  <nickc@redhat.com>
 616
 617         PR gas/12754
 618         * config/tc-tic30.c (ordinal_names): Allow translation of the
 619         ordinal names.
 620
 621 2011-05-18  Nick Clifton  <nickc@redhat.com>
 622
 623         * config/tc-arm.c (s_unreq): Reword warning message to make it
 624         easier to translate.
 625         * config/tc-ia64.c (md_show_usage): Add note for translators.
 626         * configure.in (ALL_LINGUAS): Add "fi".
 627         * configure: Regenerate.
 628
 629 2011-05-18  Tristan Gingold  <gingold@adacore.com>
 630
 631         * config/tc-ppc.h (ppc_tc_sy): Reorder fields.
 632         Put size into an union with dw.
 633         (OBJ_COPY_SYMBOL_ATTRIBUTES): Adjust.
 634         (ppc_xcoff_end): Declare.
 635         (md_end): Define.
 636         * config/tc-ppc.c: Add includes for xcoff.
 637         (ppc_dwsect): New function.
 638         (md_pseudo_table): Add dwsect.
 639         (struct dw_subsection): New.
 640         (dw_sections): New.
 641         (ppc_change_debug_section): New function.
 642         (ppc_xcoff_end): Ditto.
 643         (ppc_function): Adjust for ppc_tc_sy.
 644         (ppc_symbol_new_hook): Ditto.
 645         (ppc_frob_symbol): Ditto.
 646         (ppc_frob_section): Do not set vma for debug sections.
 647         (ppc_fix_adjustable): Return true for debug sections.
 648         * config/obj-coff.c: Add includes for xcoff.
 649         (coff_frob_section): Handle dwarf section.
 650
 651 2011-05-17  Nick Clifton  <nickc@redhat.com>
 652
 653         * po/fi.po: New Finnish translation.
 654         * po/fr.po: Updated French translation.
 655
 656         * config/tc-m32r.c (md_show_usage): Fix typos in descriptions.
 657         * config/tc-mt.c (md_assemble): Fix typos in warning messages.
 658         * cond.c (s_else): Fix typos in error messages.
 659         * config/tc-pj.c (md_assemble): Fix typo in error message.
 660
 661 2011-05-16  Hans-Peter Nilsson  <hp@axis.com>
 662
 663         * config/tc-cris.c (md_parse_option) <OPTION_PIC>: Error if not
 664         emitting ELF object.
 665         (md_show_usage): Only mention --pic if the assembler can generate
 666         ELF objects.
 667         * doc/c-cris.texi (CRIS-Opt): Mention that generating ELF is a
 668         prerequisite for --pic being a valid option.
 669
 670 2011-05-13  Frederic Marchal  <fmarchal@perso.be>
 671
 672         PR gas/12755
 673         * config/tc-v850.c (parse_register_list): Correct error string.
 674
 675 2011-05-12  Quentin Neill  <quentin.neill@amd.com>
 676
 677         * config/tc-i386.c (cpu_arch): Rename PROCESSOR_BDVER1 to PROCESSOR_BD.
 678         (i386_align_code): Ditto
 679
 680 2011-05-12  Matthew Gretton-Dann  <matthew.gretton-dann@arm.com>
 681
 682         PR gas/12715
 683         * config/tc-arm.c (parse_big_immediate):  Fix parsing of 64-bit
 684         immediates on 32-bit hosts.
 685
 686 2011-05-10  Quentin Neill  <quentin.neill@amd.com>
 687
 688         * config/tc-i386.c (cpu_arch): Add bdver2 and rename
 689         PROCESSOR_BDVER1 to PROCESSOR_BDVER.
 690         (i386_align_code): Rename PROCESSOR_BDVER1.
 691         (processor_type): Ditto.
 692         * doc/c-i386.texi: Add bdver2.
 693
 694 2011-05-10  Alan Modra  <amodra@gmail.com>
 695
 696         * dw2gencfi.c (tc_cfi_endproc): Avoid "set but not used" error.
 697
 698 2011-05-09  Paul Brook  <paul@codesourcery.com>
 699
 700         * config/tc-tic6x.c (streq): Define.
 701         (tic6x_get_unwind): New.
 702         (s_tic6x_cantunwind, s_tic6x_handlerdata, s_tic6x_endp,
 703         s_tic6x_personalityindex, s_tic6x_personality): New functions.
 704         (md_pseudo_table): Add "endp", "handlerdata", "personalityindex",
 705         "personality" and "cantunwind".
 706         (tic6x_regname_to_dw2regnum, tic6x_frame_initial_instructions,
 707         tic6x_start_unwind_section, tic6x_unwind_frame_regs,
 708         tic6x_pop_rts_offset_little, tic6x_pop_rts_offset_big,
 709         tic6x_unwind_reg_from_dwarf, tic6x_flush_unwind_word,
 710         tic6x_unwind_byte, tic6x_unwind_2byte, tic6x_unwind_uleb,
 711         tic6x_cfi_startproc, output_exidx_entry, tic6x_output_unwinding,
 712         tic6x_cfi_endproc): New.
 713         * config/tc-tic6x.h (TIC6X_NUM_UNWIND_REGS): Define.
 714         (tic6x_unwind_info): New.
 715         (tic6x_segment_info_type): Add marked_pr_dependency, unwind and
 716         text_unwind.
 717         (TARGET_USE_CFIPOP, tc_regname_to_dw2regnum,
 718         tc_cfi_frame_initial_instructions, DWARF2_DEFAULT_RETURN_COLUMN,
 719         DWARF2_CIE_DATA_ALIGNMENT, tc_cfi_startproc, tc_cfi_endproc,
 720         tc_cfi_section_name): Define.
 721         * doc/c-tic6x.texi: Document new unwinding directives.
 722         * dw2gencfi.c (tc_cfi_startproc, tc_cfi_endproc): Add default
 723         definitions.
 724         (cfi_insn_data, fde_entry, CFI_adjust_cfa_offset, CFI_return_column,
 725         CFI_rel_offset, CFI_escape, CFI_signal_frame, CFI_val_encoded_addr):
 726         Move to dw2gencfi.h.
 727         (CFI_EMIT_target): Define.
 728         (dot_cfi_sections): Check tc_cfi_section_name.
 729         (dot_cfi_startproc): Use tc_cfi_startproc.
 730         (dot_cfi_endproc): Use tc_cfi_endproc.
 731         * dw2gencfi.h (cfi_insn_data, fde_entry, CFI_adjust_cfa_offset,
 732         CFI_return_column, CFI_rel_offset, CFI_escape, CFI_signal_frame,
 733         CFI_val_encoded_addr):  Move to here from dw2gencfi.c.
 734
 735 2011-05-07  Alan Modra  <amodra@gmail.com>
 736
 737         * dw2gencfi.c (CUR_SEG, SET_CUR_SEG, HANDLED, SET_HANDLED): Define.
 738         Use throughout in place of #if SUPPORT_FRAME_LINKONCE.
 739         (struct fde_entry): Rename cseg to cur_seg.
 740         (cfi_change_reg_numbers): Remove ATTRIBUTE_UNUSED.
 741         (get_cfi_seg): Likewise.  Use if (SUPPORT_FRAME_LINKONCE) rather
 742         that #if SUPPORT_FRAME_LINKONCE.
 743         (cfi_finish): Likewise.
 744
 745 2011-05-06  Tristan Gingold  <gingold@adacore.com>
 746
 747         * read.c (s_comm_internal): Remove code for OBJ_VMS.
 748         (s_data): Ditto.
 749         (s_text): Ditto.
 750         * write.c (write_object_file): Ditto.
 751         * symbols.c (define_sym_at_dot): Ditto.
 752         (colon): Ditto.
 753
 754 2011-05-05  Alan Modra  <amodra@gmail.com>
 755
 756         * dw2gencfi.c (SUPPORT_FRAME_LINKONCE): Define.  Use throughout
 757         file to conditionally compile code added 2011-04-26.
 758         (cfi_change_reg_numbers): Add ATTRIBUTE_UNUSED on params only used
 759         when SUPPORT_FRAME_LINKONCE.
 760         (get_cfi_seg): Likewise.  Reintroduce old code for when not
 761         SUPPORT_FRAME_LINKONCE.
 762         (cfi_finish): Move get_cfi_seg calls out of loop when not
 763         SUPPORT_FRAME_LINKONCE.  Avoid unused var warning.
 764
 765 2011-05-03  Paul Brook  <paul@codesourcery.com>
 766
 767         * config/tc-tic6x.c (s_ehtype): New function.
 768         (md_pseudo_table): Add "ehtype".
 769         (tic6x_fix_adjustable, md_apply_fix): BFD_RELOC_C6000_EHTYPE.
 770         * doc/c-tic6x.texi: Document .ehtype directive.
 771
 772 2011-04-26  Kai Tietz  <ktietz@redhat.com>
 773
 774         * dw2gencfi.c (dwcfi_seg_list): New struct.
 775         (dwcfi_hash): New static hash variable.
 776         (get_debugseg_name): New.
 777         (alloc_debugseg_item): New.
 778         (make_debug_seg): New.
 779         (dwcfi_hash_insert): New.
 780         (dwcfi_hash_find): New.
 781         (dwcfi_hash_find_or_make): New.
 782         (cfi_insn_data): New member cur_seg.
 783         (cie_entry): Likewise.
 784         (fde_entry): New cseg and handled members.
 785         (alloc_fde_entry): Initialize cseg member.
 786         (alloc_cfi_insn_data): Initialize cur_seg member.
 787         (dot_cfi_sections): Compare for beginning of
 788         section names via strncmp.
 789         (get_cfi_seg): New.
 790         (cfi_finish): Treat link-once sections.
 791         (is_now_linkonce_segment): New local helper.
 792         (output_cie): Ignore cie entries not member of current
 793         segment.
 794         (output_fde): Likewise.
 795         (select_cie_for_fde): Likewise.
 796         (cfi_change_reg_numbers): Add new argument for current segment
 797         and ignore insn elements, if not part of current segment.
 798         * ehopt.c (get_cie_info): Use strncmp for
 799         section name matching.
 800         (heck_eh_frame): Likewise.
 801
 802 2011-04-20  Catherine Moore  <clm@codesourcery.com>
 803             David Ung <davidu@mips.com>
 804
 805         * config/mips.c (mips_cl_insn): Add new field complete_p.
 806         (create_insn): Initialize complete_p to zero.
 807         (BASE_REG_EQ): New.
 808         (fix_24k_align_to): New.
 809         (fix_24k_store_info): Declare.
 810         (fix_24k_sort): New.
 811         (fix_24k_record_store_info): New.
 812         (nops_for_24k): New.
 813         (nops_for_insn): Call nops_for_24k.
 814         (append_insn): Move O_constant expression handling.
 815
 816 2011-04-20  Alan Modra  <amodra@gmail.com>
 817
 818         * hash.c (set_gas_hash_table_size): Use bfd_hash_set_default_size.
 819         (hash_new_sized): New function, split out from..
 820         (hash_new): ..here.
 821
 822 2011-04-19  Nick Clifton  <nickc@redhat.com>
 823
 824         * config/tc-arm.c (v7m_psrs): Revert previous delta.
 825
 826 2011-04-18  Julian Brown  <julian@codesourcery.com>
 827             Nick Clifton  <nickc@redhat.com>
 828
 829         * config/tc-arm.c (parse_psr): Use selected_cpu not cpu_variant to
 830         detect M-profile targets.
 831         (do_t_swi): Exclude v7 and higher variants from arm_ext_os test.
 832         (v7m_psrs): Fix typo: basepri_max should be basepri_mask.
 833
 834 2011-04-14  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>
 835
 836         * config/tc-s390.c (s390_machine): New prototype.
 837         (md_pseudo_table): New pseudo-op .machine.
 838         (s390_opcode_hash): Initialize to NULL.
 839         (s390_parse_cpu): New function.
 840         (md_parse_option): Use s390_parse_cpu.
 841         (s390_setup_opcodes): New function.
 842         (md_begin): Use s390_setup_opcodes.
 843         (s390_machine): New hook handling the new .machine pseudo.
 844
 845         * doc/c-s390.texi: Document the new pseudo op .machine.
 846
 847 2011-04-12  H.J. Lu  <hongjiu.lu@intel.com>
 848
 849         * config/tc-i386.c (i386_mach): Start error message with lower
 850         case.
 851         (md_begin): Likewise.
 852         (md_parse_option): Likewise.
 853         (i386_target_format): Likewise.
 854         (check_byte_reg): Likewise.
 855         (check_long_reg): Likewise.
 856         (check_qword_reg): Likewise.
 857         (check_word_reg): Likewise.
 858
 859 2011-04-12  Nick Clifton  <nickc@redhat.com>
 860
 861         PR gas/12532
 862         * config/tc-arm.c (relax_branch): Do not relax branches to
 863         preemptable global symbols.
 864
 865 2011-04-11  Julian Brown  <julian@codesourcery.com>
 866
 867         * config/tc-arm.c (parse_psr): Add LHS argument. Improve support
 868         for *APSR bitmasks.
 869         (operand_parse_code): Replace OP_PSR with OP_wPSR and OP_rPSR.
 870         Remove OP_RVC_PSR.
 871         (parse_operands): Likewise.
 872         (do_mrs): Tweak error message for constraint.
 873         (do_t_mrs): Update constraints for changes to APSR support.
 874         (do_t_msr): Likewise. Don't set PSR_f flag here.
 875         (psrs): Remove "g", "nzcvq", "nzcvqg".
 876         (insns): Tweak entries for msr and mrs instructions.
 877
 878 2011-04-11  Kai Tietz  <ktietz@redhat.com>
 879
 880         * config/tc-i386.c (x86_cons): Initialize adjust with zero.
 881
 882 2011-04-11  Nick Clifton  <nickc@redhat.com>
 883
 884         * config/tc-i386.c (x86_cons): Define even for non-ELF targets.
 885         * config/tc-i386.h (x86_cons): Always prototype.
 886
 887         * config/tc-cr16.c (getprocregp_image): Fix type of 'r' parameter
 888         in order to avoid a compile time warning.
 889         (getprocreg_image): Likewise.
 890
 891 2011-04-11  Alan Modra  <amodra@gmail.com>
 892
 893         * config/tc-cr16.c (getprocreg_image): Correct range check.
 894         (getprocregp_image): Likewise.
 895
 896 2011-04-06  Joseph Myers  <joseph@codesourcery.com>
 897
 898         * configure.tgt (strongarm*be, strongarm*b, strongarm*,
 899         xscale*be|xscale*b, xscale*): Remove architectures.
 900         (thumb-*-coff, thumb-*-rtems*, thumb-*-elf, thumb-epoc-pe,
 901         thumb-*-pe, xscale-*-coff, xscale-*-elf): Remove targets.
 902
 903 2011-04-01  Tristan Gingold  <gingold@adacore.com>
 904
 905         * config/tc-ia64.c (md_apply_fix): Add a cast to avoid a warning.
 906
 907 2011-03-31  Bernd Schmidt  <bernds@codesourcery.com>
 908
 909         * config/tc-tic6x.c (sbss_section, scom_section, scom_symbol): New
 910         static variables.
 911         (md_begin): Initialize them.
 912         (s_tic6x_scomm): New static function.
 913         (md_pseudo_table): Add "scomm".
 914         (tc_gen_reloc): Really undo all adjustments made by
 915         bfd_install_relocation.
 916         * doc/c-tic6x.texi: Document the .scomm directive.
 917
 918 2011-03-31  Tristan Gingold  <gingold@adacore.com>
 919
 920         * dwarf2dbg.c (DWARF2_VERSION): Define.
 921         (out_debug_line): Use it.
 922         (out_debug_aranges): Ditto.
 923         (out_debug_info): Ditto.
 924         * config/tc-ia64.h (DWARF2_VERSION): Override it.
 925
 926 2011-03-30  Michael Snyder  <msnyder@vmware.com>
 927
 928         * obj-elf.c (obj_elf_section): Free malloced name.
 929         * macro.c (get_any_string): Free malloced br_buf.
 930         (do_formals): Free 'formal'.
 931
 932 2011-03-30  Tristan Gingold  <gingold@adacore.com>
 933
 934         * config/tc-ppc.c (ppc_frob_symbol): Convert stsym symbols value
 935         to offset only if within is set.
 936         (ppc_stabx): Reformat.  For stsym stabs, add a check and set
 937         within only for symbols.
 938
 939 2011-03-29  Richard Henderson  <rth@redhat.com>
 940
 941         PR 12610
 942         * config/tc-alpha.c (s_alpha_align): Don't auto-align a previous
 943         label; zap alpha_insn_label.
 944
 945 2011-03-29  H.J. Lu  <hongjiu.lu@intel.com>
 946
 947         * config/tc-i386.c (handle_quad): Properly handle multiple
 948         operands.
 949
 950 2011-03-29  Mike Frysinger  <vapier@gentoo.org>
 951
 952         * config/bfin-parse.y (BYTEUNPACK): Return yyerror when dest
 953         reg $2 is the same as dest reg $4.
 954
 955 2011-03-29  Mike Frysinger  <vapier@gentoo.org>
 956
 957         * config/bfin-parse.y (BYTEOP16M): Return yyerror when dest
 958         reg $2 is the same as dest reg $4.
 959
 960 2011-03-29  Mike Frysinger  <vapier@gentoo.org>
 961
 962         * config/bfin-parse.y (BYTEOP16P): Return yyerror when dest
 963         reg $2 is the same as dest reg $4.
 964
 965 2011-03-28  Mike Frysinger  <vapier@gentoo.org>
 966
 967         * config/bfin-parse.y (16bit acc add): Return yyerror when dest
 968         reg $1 is the same as dest reg $7.
 969
 970 2011-03-28  H.J. Lu  <hongjiu.lu@intel.com>
 971
 972         * config/tc-i386.c (handle_quad): New.
 973         (md_pseudo_table): Add "quad".
 974
 975 2011-03-26  John Marino  <binutils@marino.st>
 976
 977         * configure.tgt: Fix support for *-*-dragonfly*.
 978         * config/tc-i386.c: define SVR4_COMMENT_CHARS for dragonfly.
 979         * config/te-dragonfly.h: New file.
 980
 981 2011-03-24  Eric B. Weddington  <eric.weddington@atmel.com>
 982
 983         * config/tc-avr.c (mcu_types): Add new devices: atmega325pa,
 984         atmega3250pa, atmega3290pa, atmega16hvbrevb, atmega32hvbrevb,
 985         at90pwm161.
 986         * doc/c-avr.texi: Document new device names.
 987
 988 2011-03-24  Mike Frysinger  <vapier@gentoo.org>
 989
 990         * config/bfin-parse.y (dual 32bit add/sub): Return yyerror when dest
 991         reg $1 is the same as dest reg $7.
 992         (quad 16bit add/sub): Return yyerror when dest reg $1 is the same as
 993         dest reg $7.
 994
 995 2011-03-24  Mike Frysinger  <vapier@gentoo.org>
 996
 997         * config/bfin-parse.y (check_macfuncs): Clarify error message when
 998         P is mismatched.  Check destination regno are off by one when P is
 999         set, or are equal when P is not set.
1000
1001 2011-03-23  Mike Frysinger  <vapier@gentoo.org>
1002
1003         * config/bfin-parse.y (SEARCH): Return yyerror when dest reg $2 is
1004         the same as dest reg $4.
1005         (BITMUX): Return yyerror when dest reg $3 is the same as dest reg $5.
1006
1007 2011-03-23  Eric B. Weddington  <eric.weddington@atmel.com>
1008
1009         * config/tc-avr.c (mcu_types): Add new xmega devices: atxmega64a1u,
1010         atxmega128a1u, atxmega16x1, atxmega32x1, atxmega128b1, atxmega256a3bu.
1011         * doc/c-avr.texi: Document new device names.
1012
1013 2011-03-22  Eric B. Weddington  <eric.weddington@atmel.com>
1014
1015         * config/tc-avr.c (struct avr_opcodes_s): Add opcode field.
1016         (AVR_INSN): Change definition to match.
1017         (avr_opcodes): Likewise, change to match.
1018         (mcu_types): Add XMEGA architecture names and new XMEGA device names.
1019         (md_show_usage): Add XMEGA architecture names.
1020         (avr_operand): Add 'E' constraint for DES instruction of XMEGA devices.
1021         Add support for SPM Z+ instruction.
1022         * doc/c-avr.texi: Add documentation for XMEGA architectures and
1023         devices.
1024
1025 2011-03-21  Eric B. Weddington  <eric.weddington@atmel.com>
1026
1027         * config/tc-avr.c (md_show_usage): Add "Assembler" text to output.
1028
1029 2011-03-18  Alan Modra  <amodra@gmail.com>
1030
1031         * config/obj-elf.c (elf_frob_symbol): Report S_SET_SIZE symbol
1032         on .size expression errors rather than symbols in the size expression.
1033
1034 2011-03-18  Alan Modra  <amodra@gmail.com>
1035
1036         * input-scrub.c (line_numberT): Delete.
1037         (input_scrub_close): Reset line counters.
1038         * messages.c (as_show_where): Don't print invalid line number.
1039         (as_warn_internal, as_bad_internal): Likewise.
1040
1041 2011-03-18  Alan Modra  <amodra@gmail.com>
1042
1043         * read.c (read_a_source_file): Remove md_after_pass_hook.
1044         Move "quit" label before set of dot_symbol.
1045         * config/tc-d10v.h (md_after_pass_hook): Don't define.
1046         * config/tc-d30v.h (md_after_pass_hook): Likewise.
1047         * config/tc-m32r.h (md_after_pass_hook): Likewise.
1048         (md_cleanup): Define to call m32r_fill_insn.
1049
1050 2011-03-18  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>
1051
1052         * config/tc-s390.c (md_parse_option): Add -march=all option which
1053         switches to the highest available CPU.
1054
1055 2011-03-17  Alan Modra  <amodra@gmail.com>
1056
1057         PR 12569
1058         * expr.c (operand): Correct passing of "mode" to expr.
1059         * read.c (do_org): Allow expr_section.
1060         (get_known_segmented_expression): Don't assert anything about the
1061         segment.
1062
1063 2011-03-16  H.J. Lu  <hongjiu.lu@intel.com>
1064
1065         * as.c (show_usage): Add --size-check=.
1066         (parse_args): Add and handle OPTION_SIZE_CHECK.
1067
1068         * as.h (flag_size_check): New.
1069
1070         * config/obj-elf.c (elf_frob_symbol): Use as_bad to report
1071         bad .size directive only for --size-check=error.
1072
1073         * doc/as.texinfo: Document --size-check=.
1074
1075 2011-03-14  Mike Frysinger  <vapier@gentoo.org>
1076
1077         * config/tc-bfin.c (bfin_cpus[]): Add 0.4 for
1078         bf542/bf544/bf547/bf548/bf549.
1079
1080 2011-03-14  Richard Sandiford  <richard.sandiford@linaro.org>
1081
1082         * config/tc-arm.c (md_pcrel_from_section): Use S_FORCE_RELOC to
1083         determine whether a relocation is needed.
1084         (md_apply_fix, arm_apply_sym_value): Likewise.
1085
1086 2011-03-14  Richard Sandiford  <richard.sandiford@linaro.org>
1087
1088         * config/tc-arm.c (arm_adjust_symtab): Set the branch type
1089         for Thumb symbols.
1090
1091 2011-03-11  Nick Clifton  <nickc@redhat.com>
1092
1093         * remap.c (remap_debug_filename): Always allocate a buffer for the
1094         returned pointer.
1095         * stabs.c (stabs_generate_asm_file): Free the pointer returned by
1096         remap_debug_filename.
1097
1098 2011-03-10  Michael Snyder  <msnyder@vmware.com>
1099
1100         Revert the following change:
1101         * dwarf2dbg.c (out_file_list): Free malloced 'dir'.
1102         (out_debug_info): Free malloced 'dirname' and 'comp_dir'.
1103
1104 2011-03-10  Alan Modra  <amodra@gmail.com>
1105
1106         * gas/config/obj-elf.h (ELF_TARGET_SYMBOL_FIELDS,
1107         TARGET_SYMBOL_FIELDS): Don't define.
1108         * gas/config/tc-arc.c (arc_common): Use correct symbol "local" field.
1109
1110 2011-03-09  Michael Snyder  <msnyder@vmware.com>
1111
1112         * dwarf2dbg.c (out_file_list): Free malloced 'dir'.
1113         (out_debug_info): Free malloced 'dirname' and 'comp_dir'.
1114         (emit_fixed_inc_line_addr): Assign instead of conditional in
1115         assert.
1116
1117 2011-03-05  H.J. Lu  <hongjiu.lu@intel.com>
1118
1119         * config/obj-elf.c (elf_frob_symbol): Mention symbol name in
1120         non-constant .size expression.
1121
1122 2011-03-02  Nick Clifton  <nickc@redhat.com>
1123
1124         * ecoff.c: Incldue filenames.h
1125
1126 2011-02-28  Kai Tietz  <kai.tietz@onevision.com>
1127
1128         * depend.c (register_dependency): Use filename_(n)cmp.
1129         * dwarf2dbg.c (get_filenum): Likewise.
1130         * ecoff.c (add_file): Likewise.
1131         (ecoff_generate_asm_lineno): Likewise.
1132         * input-scrub.c (new_logical_line_flags): Likewise.
1133         * listing.c (file_info): Likewise.
1134         (listing_newline): Likewise.
1135         * remap.c (remap_debug_filename): Likewise.
1136         * stabs.c (generate_asm_file): Likewise.
1137         (stabs_generate_asm_lineno): Likewise.
1138
1139 2011-02-28  Maciej W. Rozycki  <macro@codesourcery.com>
1140
1141         * config/tc-mips.c (append_insn): Disable branch relaxation for
1142         DSP instructions.
1143
1144 2011-02-28  Maciej W. Rozycki  <macro@codesourcery.com>
1145
1146         * config/tc-mips.c (macro): Handle M_PREF_AB.
1147
1148 2011-02-28  Maciej W. Rozycki  <macro@codesourcery.com>
1149
1150         * config/tc-mips.c (RELAX_BRANCH_ENCODE): Encode the temporary
1151         register to use.
1152         (RELAX_BRANCH_UNCOND): Adjust accordingly.
1153         (RELAX_BRANCH_LIKELY): Likewise.
1154         (RELAX_BRANCH_LINK): Likewise.
1155         (RELAX_BRANCH_TOOFAR): Likewise.
1156         (RELAX_BRANCH_AT): New macro.
1157         (append_insn): Encode the temporary register to use in standard
1158         MIPS branch relaxation.
1159         (relaxed_branch_length): Update according to changes to
1160         RELAX_BRANCH_ENCODE.
1161         (md_convert_frag): Use the encoded register as the temporary.
1162
1163 2011-02-28  Maciej W. Rozycki  <macro@codesourcery.com>
1164
1165         * config/tc-mips.c (mips_fix_adjustable): On REL targets also
1166         reject PC-relative relocations.
1167
1168 2011-02-28  Maciej W. Rozycki  <macro@codesourcery.com>
1169
1170         * config/tc-mips.c (md_convert_frag): Correct message
1171         capitalization.
1172
1173 2011-02-28  Alan Modra  <amodra@gmail.com>
1174
1175         * symbols.c (report_op_error): Remove unnecessary forward declaration.
1176         Add "op" parameter.  Report operator and operand segments in error
1177         message, not operand symbols.
1178         (resolve_symbol_value): Always set segment for equated symbols, not
1179         just when finalizing.  Adjust report_op_error calls.
1180
1181 2011-02-25  H.J. Lu  <hongjiu.lu@intel.com>
1182
1183         * config/tc-i386.c (reloc): Don't sign-check 4-byte relocations
1184         if 64bit relocations aren't allowed.
1185
1186 2011-02-25  Alan Modra  <amodra@gmail.com>
1187
1188         PR gas/12519
1189         * config/obj-elf.c (elf_frob_symbol): Properly handle size expression.
1190
1191 2011-02-21  Maciej W. Rozycki  <macro@codesourcery.com>
1192
1193         * config/tc-mips.c (mips_ip) <'o'>: Remove duplicate
1194         initialization of offset_reloc.
1195
1196 2011-02-15  Richard Henderson  <rth@redhat.com>
1197
1198         * dw2gencfi.c (dot_cfi_dummy): New.
1199         (cfi_pseudo_table) [!TARGET_USE_CFIPOP]: New.
1200         * read.c (pobegin): Unconditionally call cfi_pop_insert.
1201
1202 2011-02-13  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
1203
1204         * configure: Regenerate.
1205
1206 2011-02-13  Mike Frysinger  <vapier@gentoo.org>
1207
1208         * config/bfin-lex.l (BYTEOP2M): Remove tokenization.
1209         * config/bfin-parse.y (BYTEOP2M): Delete token.
1210         (asm_1): Remove BYTEOP2M insn matching.
1211
1212 2011-02-12  Mike Frysinger  <vapier@gentoo.org>
1213
1214         * config/bfin-defs.h: Include opcode/bfin.h.
1215         (M_S2RND, M_T, M_W32, M_FU, M_TFU, M_IS, M_ISS2, M_IH, M_IU): Delete.
1216
1217 2011-02-11  Mike Frysinger  <vapier@gentoo.org>
1218
1219         * doc/c-bfin.texi (Instruction Delimiting): Fix occur typo.
1220         (Modify Registers): Fix subtracted typo.
1221         (.byte2): Extend and swap descriptions with .byte4.
1222         (.byte4): Extend and swap descriptions with .byte2.
1223         (.db, .dw, .dd): Document behavior.
1224
1225 2011-02-11  Mike Frysinger  <vapier@gentoo.org>
1226
1227         * config/bfin-parse.y (TESTSET): Reject REG_SP and REG_FP.
1228
1229 2011-02-11  Alan Modra  <amodra@gmail.com>
1230
1231         * doc/c-ppc.texi (PowerPC-Opts <-nops>): Clarify.
1232
1233 2011-02-10  Alan Modra  <amodra@gmail.com>
1234
1235         * doc/as.texinfo (Overview): Add missing markup around Blackfin
1236         and PowerPC options.
1237
1238 2011-02-10  Alan Modra  <amodra@gmail.com>
1239
1240         * config/tc-ppc.c (md_show_usage): Remove -l and -b.  Add -K PIC.
1241         * doc/as.texinfo: Refer to and include c-ppc.texi for PowerPC options.
1242         (Overview <Target PowerPC options>): Add a number of missing options.
1243         * doc/c-ppc.texi: Likewise.  Add markup for use in manpage generation.
1244
1245 2011-02-08  H.J. Lu  <hongjiu.lu@intel.com>
1246
1247         PR gas/6957
1248         * config/tc-i386.c (i386_align_code): Use f32_patt when tuning
1249         for i686.
1250
1251 2011-02-08  H.J. Lu  <hongjiu.lu@intel.com>
1252
1253         * config/tc-i386.c (set_cpu_arch): Also update cpu_arch_isa_flags
1254         for ISA extensions.
1255         (md_parse_option): Likewise.
1256
1257 2011-02-04  Bernd Schmidt  <bernds@codesourcery.com>
1258
1259         * doc/as.texinfo (Target TIC6X options): Don't mention "-matomic".
1260         * doc/c-tic6x.texi (TIC6X Directives): Don't mention ".atomic".
1261         (TIC6X Options): Don't mention "-matomic".
1262         * config/tc-tic6x.c (OPTION_MATOMIC, OPTION_MNO_ATOMIC): Delete.
1263         (md_longopts): Remove corresponding entries.
1264         (md_parse_option): Don't handle them.
1265         (md_show_usage): Don't document them.
1266         (tic6x_atomic): Delete variable.
1267         (tic6x_update_features): Always copy tic6x_arch_enable to
1268         tic6x_features.
1269         (tic6x_arch_enable): Remove references to TIC6X_INSN_ATOMIC.
1270         (s_tic6x_atomic, s_tic6x_noatomic): Remove functions.
1271         (md_pseudo_table): Remove ".atomic" and ".noatomic".
1272
1273 2011-01-31  Nick Clifton  <nickc@redhat.com>
1274
1275         * write.c (write_contents): Include output file name and bfd error
1276         value when reporting the inability to write to the output file.
1277         * config/tc-rx.c (rx_handle_align): Do not insert NOPs into align
1278         frag that has a non-zero fill value.
1279
1280 2011-01-27  DJ Delorie  <dj@redhat.com>
1281
1282         * config/tc-rx.c (md_convert_frag): If we can't compute the target
1283         address, zero out the values stored in the object file to make
1284         objdump's output consistent.
1285
1286 2011-01-26  Kai Tietz  <kai.tietz@onevision.com>
1287
1288         * config/tc-i386.c (md_begin): Set for x64 windows COFF target
1289         x86_dwarf2_return_column to 32.
1290
1291 2011-01-20  Nick Clifton  <nickc@redhat.com>
1292
1293         PR gas/12384
1294         * config/tc-h8300.c (constant_fits_width_p): Use correct type for
1295         comparison.
1296
1297 2011-01-18  H.J. Lu  <hongjiu.lu@intel.com>
1298
1299         * write.c (compress_debug): Return if section size is smaller
1300         than 32 bytes.
1301
1302 2011-01-18  H.J. Lu  <hongjiu.lu@intel.com>
1303
1304         PR gas/12409
1305         * write.c (compress_debug): Return if section size is 0.
1306
1307 2011-01-18  Mingfeng Wu  <mingfeng@faraday-tech.com>
1308
1309         * config/tc-arm.c (arm_cpus): Add Faraday ARMv5TE compatible
1310         cores: fa606te, fa616te, fmp626.  Modify the VFP of fa626te.
1311         * doc/c-arm.texi (ARM Options): Add -mcpu={fa606te, fa616te,
1312         fmp626} options.
1313
1314 2011-01-18  Nick Clifton  <nickc@redhat.com>
1315
1316         PR gas/12390
1317         * doc/all.texi: Add NS32K
1318         * doc/as.texinfo: Remove target specific details of which
1319         characters act as comment initiators and statement separators into
1320         individual target specific files.
1321         * doc/c-alpha.texi (Alpha-Chars): Document special behaviour of
1322         the hash character at the start of a line.
1323         * doc/c-arm.texi (ARM-Chars): Likewise.
1324         * doc/c-avr.texi (AVR-Chars): Likewise.
1325         * doc/c-d10v.texi (D10V-Chars): Likewise.
1326         * doc/c-d30v.texi (D30V-Chars): Likewise.
1327         * doc/c-mmix.texi (MMIX-Chars): Likewise.
1328         * doc/c-s390.texi (s390 characters): Likewise.
1329         * doc/c-sh.texi (SH-Chars): Likewise.
1330         * doc/c-sh64.texi (SH64-Chars): Likewise.
1331         * doc/c-sparc.texi (SPARC-Chars): Likewise.
1332         * doc/c-tic6x.texi (TIC6X Syntax): Likewise.
1333         * doc/c-xtensa.texi (Xtensa Syntax): Likewise.
1334         * doc/c-z80.texi (Z80-Chars): Likewise.
1335         * doc/c-z8k.texi (Z8000-Chars): Likewise.
1336         * doc/c-pdp11.texi (PDP11-Syntax): Document line separator character.
1337         * doc/c-arc.texi (ARC-Chars): Fill in this subsection.
1338         * doc/c-bfin.texi (Blackfin Syntax): Document line comment and
1339         line separator characters.
1340         * doc/c-cr16.texi (CR16 Syntax): Likewise.
1341         * doc/c-i386.texi (i386-Chars): Likewise.
1342         * doc/c-i860.texi (i860-Chars): Likewise.
1343         * doc/c-i960.texi (i960-Chars): Likewise.
1344         * doc/c-ip2k.texi (IP2K-Chars): Likewise.
1345         * doc/c-lm32.texi (LM32-Chars): likewise.
1346         * doc/c-m32c.texi (M32C-Chars): Likewise.
1347         * doc/c-m68hc11.texi (M68HC11-syntax): Likewise.
1348         * doc/c-m68k.texi (M68K-Chars): Likewise.
1349         * doc/c-microblaze.texi (MicroBlaze-Chars): Likewise.
1350         * doc/c-msp430.texi (MSP430-Chars): Likewise.
1351         * doc/c-mt.texi (MT-Chars): Likewise.
1352         * doc/c-ns32k.texi (NS32K-Chars): Likewise.
1353         * doc/c-pj.texi (PJ-Chars): Likewise.
1354         * doc/c-ppc.texi (PowerPC-Chars): Likewise.
1355         * doc/c-rx.texi (RX-Chars): Likewise.
1356         * doc/c-score.texi (SCORE-Chars): Likewise.
1357         * doc/c-tic54x.texi (TIC54X-Chars): Likewise.
1358         * doc/c-v850.texi (V850-Chars): Likewise.
1359         * doc/c-vax.texi (VAX-Chars): Likewise.
1360         * doc/c-xc16x.texi (xc16x-Chars): Likewise.
1361
1362 2011-01-17  Quentin Neill  <quentin.neill@amd.com>
1363
1364         * config/tc-i386.c (cpu_arch): Add CPU_TBM_FLAGS.
1365
1366         * doc/c-i386.texi (i386-TBM): New section.
1367
1368 2011-01-16  H.J. Lu  <hongjiu.lu@intel.com>
1369
1370         * config/tc-i386.c (disallow_64bit_disp): Renamed to ...
1371         (disallow_64bit_reloc): This.
1372         (md_assemble): Don't check movabs for x32 mode here.
1373         (i386_target_format): Updated.
1374         (tc_gen_reloc): Check if 64bit relocations are allowed.
1375
1376 2011-01-15  H.J. Lu  <hongjiu.lu@intel.com>
1377
1378         * config/tc-i386.c (disallow_64bit_disp): New.
1379         (x86_elf_abi): Replace X86_64_LP64_ABI/X86_64_ILP32_ABI with
1380         X86_64_ABI/X86_64_X32_ABI.
1381         (md_assemble): Don't allow movabs with relocation in x32 mode.
1382         (i386_target_format): Updated.
1383
1384 2011-01-14  H.J. Lu  <hongjiu.lu@intel.com>
1385
1386         * config/tc-i386.c (OPTION_N32): Renamed to ...
1387         (OPTION_X32): This.
1388         (md_longopts): Replace n32 with x32.
1389         (md_parse_option): Updated.
1390         (md_show_usage): Likewise.
1391
1392         * doc/c-i386.texi: Replace --n32 with --x32.
1393
1394 2011-01-11  Mingjie Xing  <mingjie.xing@gmail.com>
1395
1396         * config/tc-mips.c (mips_ip): Update error messages.  Take an
1397         unadjusted offset for "+c" argument.
1398
1399 2011-01-10  Nick Clifton  <nickc@redhat.com>
1400
1401         * config/tc-i386.c (x86_elf_abi): Only define for targets that use
1402         it.
1403
1404 2011-01-10  Nick Clifton  <nickc@redhat.com>
1405
1406         * config/tc-arm.c (s_arm_tls_desceq): Move code into ELF-only
1407         part of the file.
1408
1409 2011-01-10  Nathan Sidwell  <nathan@codesourcery.com>
1410             Glauber de Oliveira Costa  <glommer@gmail.com>
1411
1412         * doc/c-arm.texi: Document TLSDESC and TLSCALL relocations, and
1413         .tlsdescseq directive.
1414         * config/tc-arm.c (arm_typed_reg_parse): Check for potential reloc
1415         following a symbol.
1416         (s_arm_tls_descseq): New directive.
1417         (md_pseudo_table): Add it.
1418         (encode_branch): Allow TLS_CALL relocs too.
1419         (do_t_blx, do_t_branch23): Use encode_branch.
1420         (reloc_names): Add tlsdesc and tlscall.
1421         (md_apply_fix): Process tls desc relocations.
1422         (tc_gen_reloc): Likewise.
1423         (arm_fix_adjustable): Likewise.
1424
1425 2011-01-07  Quentin Neill  <quentin.neill@amd.com>
1426
1427         * config/tc-i386.c (cpu_arch): Add CPU_BMI_FLAGS.
1428
1429         * doc/c-i386.texi (i386-BMI): New section.
1430
1431 2011-01-06  Paul Koning  <ni1d@arrl.net>
1432
1433         * config/tc-pdp11.c (parse_op_no_deferred): Allow PC-relative
1434         references to absolute addresses.
1435
1436 2011-01-05  DJ Delorie  <dj@redhat.com>
1437
1438         * config/tc-rx.c (tc_gen_reloc): Emit an RX_OP_NEG expression
1439         instead of an RH_NEG32 one.
1440
1441 2011-01-05  Jonathan Wakely  <jwakely.gcc@gmail.com>
1442
1443         * doc/c-i386.texi: Clarify --n32.
1444
1445 2011-01-04  H.J. Lu  <hongjiu.lu@intel.com>
1446
1447         * config/tc-i386.c (build_modrm_byte): Allow encoding 32/64bit
1448         integer registers in VEX.vvvv.  Check register-only source
1449         operand when two source operands are swapped.  Properly update
1450         destination when two source operands are swapped.
1451
1452 2011-01-01  H.J. Lu  <hongjiu.lu@intel.com>
1453
1454         * gas.c (parse_args): Update copyright to 2011.
1455
1456 For older changes see ChangeLog-2010
1457 \f
1458 Local Variables:
1459 mode: change-log
1460 left-margin: 8
1461 fill-column: 74
1462 version-control: never
1463 End: