Fri Jun 5 23:27:04 1998 Alan Modra <alan@spri.levels.unisa.edu.au>

[deliverable/binutils-gdb.git] / gas / ChangeLog

Fri Jun  5 23:27:04 1998  Alan Modra  <alan@spri.levels.unisa.edu.au>

        * config/tc-i386.c (mode_from_disp_size): Disp16 is mode 2.
        (i386_operand): Simplify checks for valid base/index combinations.
        Disallow `in 4(%dx),%al'.

        * config/tc-i386.c (struct _i386_insn): Make regs, base_reg, and
        index_reg const.
        (add_prefix): Change parameter from char to int.

        * config/tc-i386.h (Ugh): Define opcode modifier.
        * config/tc-i386.c (md_assemble): Print warnings for Ugh insns.

        * config/tc-i386.c (md_assemble): Rewrite MATCH and
        CONSISTENT_REGISTER_MATCH macros to check register types more
        thoroughly.  Check for illegal suffix/operand combinations
        when matching insns with operands.  Handle new `s' suffix, and
        associated FloatMF opcode modifier for float insns with memory
        operands.
        * config/tc-i386.h (FloatMF): Define new opcode modifier.
        (No_sSuf, No_bSuf, No_wSuf, No_lSuf): Likewise.
        (SHORT_OPCODE_SUFFIX, LONG_OPCODE_SUFFIX): Define.
        * config/tc-i386.c: Rename WORD_PREFIX_OPCODE to
        DATA_PREFIX_OPCODE throughout.

        * config/tc-i386.c (REGISTER_WARNINGS): Define.
        (md_assemble): Rewrite suffix/register operand checking code to be
        more thorough.  Remove Abs8,16,32.  Change occurrences of Mem to
        AnyMem, the better to grep.
        (pi): Remove Abs.
        (i386_operand): Don't set Mem bits in i.types[this_operand] when
        given a memory operand.  Don't set Abs bits either.
        (type_names): Remove Mem*, Abs*.
        * config/tc-i386.h (Mem8, Mem16, Mem32, Abs8, Abs16, Abs32): Don't
        define opcode_modifiers as these cases are handled by Disp8,
        Disp16, Disp32 and suffix checks.
        (COMES_IN_BOTH_DIRECTIONS): Remove.
        (FloatR): Define. It's OK to share the bit with ReverseRegRegmem.

        * config/tc-i386.c (md_assemble): Don't emit operand size prefix
        if IgnoreDataSize modifier given.  Remove ShortformW modifier
        test.  Add test for ShortForm in W base_opcode modification.
        Merge Seg2ShortForm and Seg3ShortForm code.
        * config/tc-i386.h (ShortFormW): Remove.
        (IgnoreDataSize): Define.

Fri Jun  5 10:50:53 1998  Nick Clifton  <nickc@cygnus.com>

        * config/tc-d30v.c (md_assemble): Store previous segment state
        with previous instruction.

Wed Jun  3 18:21:56 1998  Alan Modra  <alan@spri.levels.unisa.edu.au>

        * config/tc-i386.c (SCALE1_WHEN_NO_INDEX): Define.
        (ebp, esp): Remove static variables.
        (MATCH): Remove test for InOutPortReg.
        (i386_operand): Properly handle InOutPortReg here instead.
        Disallows `inb (%dx,2)', `inb %es:(%dx)' and `mov (%dx),%ax'
        (md_assemble): Simplify and correct modrm and sib generation.
        (i386_operand): Add warning for scale without index.
        Rewrite checks for valid base/index combinations.

        * config/tc-i386.c (END_STRING_AND_SAVE): Protect arguments of
        macros and enclose in do while(0).
        (RESTORE_END_STRING): Likewise.
        (md_assemble): Add one to printed operand number so we start
        from 1 not 0.  Add some more gettext invocations.
        (i386_operand): Fix `%%s' -> `%%%s'. Inc printed operand
        number here too.

        * config/tc-i386.h (WAIT_PREFIX, LOCKREP_PREFIX, ADDR_PREFIX,
        DATA_PREFIX, SEG_PREFIX): Define.
        * config/tc-i386.c (struct _i386_insn): Remove wait_prefix field.
        (check_prefix): Remove function.
        (add_prefix): New function.  Add prefix to i.prefix as well as
        doing checks.
        (md_assemble): Changes for add_prefix.  Remove hack for wait
        prefix, instead always output prefixes in fixed order.  Test
        for jcxz/loop when selecting between word & dword operations,
        and add address size prefix rather than operand size prefix.
        Remove operand -> address size hack when emitting jcxz/loop.
        (i386_operand): Remove O_Absent check as it's done in expr.

Wed Jun  3 15:09:10 1998  Ian Lance Taylor  <ian@cygnus.com>

        * configure.in: Recognize m5200 as a cpu_type of m68k.
        * aclocal.m4: Rebuild with current libtool.
        * configure: Rebuild.

Wed Jun  3 14:11:59 1998  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>

        * config/tc-m68k.c (md_estimate_size_before_relax): Add more calls
        to relaxable_symbol to prevent references to external symbol from
        being relaxed.

Wed Jun  3 14:10:36 1998  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-m68k.c (relaxable_symbol): If TARGET_OS is "elf", all
        symbols are relaxable.

start-sanitize-sky
Wed Jun  3 10:26:04 1998  Doug Evans  <devans@canuck.cygnus.com>

        * config/tc-dvp.c (md_begin): Change alignment of .DVP.ovlytab to 4.
        (create_vuoverlay_section): Entries are 4 bytes not 8.

end-sanitize-sky
Wed Jun  3 09:16:00 1998  Catherine Moore  <clm@cygnus.com>
 
        * config/tc-v850.c (md_begin):  Don't create special
        sections by default.
 
Tue Jun  2 14:52:56 1998  Jeffrey A Law  (law@cygnus.com)

        * config/tc-mips.c (macro): For div and udiv, close the
        reorder block as soon as possible.

Tue Jun  2 15:36:13 1998  Ian Lance Taylor  <ian@cygnus.com>

        From Matt Semersky <matts@scd.hp.com>:
        * macro.c (macro_mri_mode): New function.
        * macro.h (macro_mri_mode): Declare.
        * read.c (s_mri): Call macro_mri_mode when switching in and out of
        MRI mode.

Tue Jun  2 13:32:22 1998  Klaus Kaempf  <kkaempf@progis.de>

        * config/tc-alpha.c (s_alpha_comm): Allow alignment parameter in
        OBJ_EVAX case.

        * config/tc-alpha.c (s_alpha_comm): Defer restoring character
        until after xstrdup in OBJ_EVAX case.

Tue Jun  2 13:11:13 1998  Pat Rankin  <rankin@eql.caltech.edu>

        * config/tc-vax.c (md_create_short_jump): Fix off by two bug in
        offset calculation.  Also, use VAX_BRW from vax-inst.h instead
        of hardcoded magic number.
        (md_create_long_jump): Use VAX_JMP and VAX_ABSOLUTE_MODE macros.

Tue Jun  2 09:25:34 1998  Doug Evans  <devans@canuck.cygnus.com>

        * read.c (do_s_func): New function.
        (s_func): Call it.
        * read.h (do_s_func): Add prototype.
start-sanitize-sky
        * config/tc-dvp.c (md_pseudo_table): Add .func/.endfunc.
        (s_dvp_func): New function.
end-sanitize-sky

start-sanitize-r5900
Mon Jun  1 17:04:56 1998  Jeffrey A Law  (law@cygnus.com)

        * config/tc-mips.c (hilo_interlocks): The r5900 has HILO interlocks.

end-sanitize-r5900
Mon Jun  1 12:47:30 1998  Doug Evans  <devans@canuck.cygnus.com>

        * config/tc-m32r.c (m32r_do_align): Only fill code sections with
        nops if fill pattern not specified.

Mon Jun  1 14:08:35 1998  Ian Lance Taylor  <ian@cygnus.com>

        From Andrew Crabtree <andrewc@typhoon.rose.hp.com>:
        * config/te-go32.h (TE_GO32): Define.
        * config/tc-i386.h (LOCAL_LABEL): Don't define if TE_GO32.

Sun May 31 15:43:06 1998  Doug Evans  <devans@canuck.cygnus.com>

        Implement .func/.endfunc pseudo-ops.
        * read.h (stabs_generate_asm_func,stabs_generate_asm_endfunc): Declare.
        (s_func): Declare.
        * read.c (potable): Add .func,.endfunc.
        (s_func): New function.
        * stabs.c (stabs_generate_asm_func,stabs_generate_asm_endfunc): New
        functions.
        (in_doc_func_p,current_function_label): New static globals.
        (stabs_generate_asm_lineno): Emit function relative stabs if in .func.

start-sanitize-sky
        * config/tc-dvp.h (ELF_TC_SPECIAL_SECTIONS): Delete .vuoverlay_table.
        (VUOVERLAY_SECTION_PREFIX,VUOVERLAY_TABLE_SECTION_NAME): Delete.
        * config/tc-dvp.c (vuoverlay_string_section): New static global.
        (md_begin): Create overlay string section.
        (create_vuoverlay_section): Put section name in overlay string section.
        Put string's offset in overlay table entry.  Set SEC_CODE flag for
        overlay sections.

end-sanitize-sky
Fri May 29 18:13:12 1998  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-a29k.h (WORKING_DOT_WORD): Define.
        * config/tc-alpha.h (WORKING_DOT_WORD): Define.
        * config/tc-arm.h (WORKING_DOT_WORD): Define.
        * config/tc-h8300.h (WORKING_DOT_WORD): Define.
        * config/tc-h8500.h (WORKING_DOT_WORD): Define.
        * config/tc-hppa.h (WORKING_DOT_WORD): Define.
        * config/tc-i860.h (WORKING_DOT_WORD): Define.
        * config/tc-i960.h (WORKING_DOT_WORD): Define.
        * config/tc-tic30.h (WORKING_DOT_WORD): Define.
        * config/tc-w65.h (WORKING_DOT_WORD): Define.
        * config/tc-z8k.h (WORKING_DOT_WORD): Define.
        * config/tc-a29k.c: Don't define md_short_jump_size,
        md_long_jump_size, md_create_short_jump or md_create_long_jump.
        * config/tc-alpha.c: Likewise.
        * config/tc-alpha.h: Likewise.
        * config/tc-arm.c: Likewise.
        * config/tc-h8300.c: Likewise.
        * config/tc-h8500.c: Likewise.
        * config/tc-hppa.c: Likewise.
        * config/tc-i860.c: Likewise.
        * config/tc-i960.c: Likewise.
        * config/tc-ppc.c: Likewise.
        * config/tc-sh.c: Likewise.
        * config/tc-sparc.h: Likewise.
        * config/tc-tic30.c: Likewise.
        * config/tc-w65.c: Likewise.
        * config/tc-z8k.c: Likewise.

Fri May 29 16:03:26 1998  Pat Rankin  <rankin@eql.caltech.edu>

        * config/tc-vax.c (_): Delete this macro used for placeholder
        values in vax_operand_width_size; it conflicts with the _() macro
        used for internationalization.

Fri May 29 13:46:07 1998  Ian Lance Taylor  <ian@cygnus.com>

        * symbols.c (symbol_find_base): Fix case insensitive symbol name
        code.  From Chris Moller <moller@bops.com>.

        Based on patch from Klaus Kaempf <kkaempf@progis.de>:
        * struc-symbol.h (struct broken_word): Add seg and subseg fields.
        * read.c (emit_expr): Initialize seg and subseg fields of a new
        broken word.
        * write.c (write_object_file): Switch to the appropriate segment
        and subsegment when processing a broken word.

        * config/tc-m68k.c (mri_assemble): New static function.
        (build_mri_control_operand): Call mri_assemble rather than
        md_assemble.
        (s_mri_else, s_mri_break, s_mri_next, s_mri_for): Likewise.
        (s_mri_endf, s_mri_endw): Likewise.

start-sanitize-sky
Thu May 28 16:23:08 1998  Doug Evans  <devans@canuck.cygnus.com>

        * config/tc-dvp.h (ELF_TC_SPECIAL_SECTIONS): Add .vuoverlay_table.
        (dvp_frob_file): Declare.
        (tc_frob_file): Define.
        (VUOVERLAY_SECTION_PREFIX,VUOVERLAY_TABLE_SECTION_NAME): New macros.
        * config/tc-dvp.c (VUOVERLAY_START_PREFIX): New macro.
        (vuoverlay_section_name,create_vuoverlay_section): New functions.
        (vuoverlay_section,vuoverlay_table_section): New static globals.
        (ovlysym_table): New static global.
        (md_begin): Create .vuoverlay_table section.
        (assemble_vif): Call create_vuoverlay_section for each mpg.
        (dvp_frob_label): Record vu labels in ovlysym_table for later
        movement from absolute section to their overlay section.
        (dvp_frob_file): New function.
        (md_apply_fix3): For 8/16/32/64 bit relocs, only process if fx_done.

end-sanitize-sky
Wed May 27 11:16:25 1998  Ian Lance Taylor  <ian@cygnus.com>

        * read.c (s_org): Call md_flush_pending_output if it is defined.

        * config/tc-sparc.c (md_show_usage): Add \n\ to new string.

Tue May 26 19:27:52 1998  Stan Cox  <scox@equinox.cygnus.com>

        * config/tc-sparc.c (OPTION_LITTLE_ENDIAN_DATA): New.
        (md_parse_option): Add for same.
        (sparc_md_end): Set bfd_mach_sparc_sparclite_le.
        (md_apply_fix3, tc_gen_reloc): Allow BFD_RELOC_SPARC_32LE.
        (cons_fix_new_sparc): Added to create BFD_RELOC_SPARC_32LE.

        * config/tc-sparc.h (cons_fix_new_sparc): Added.
        
start-sanitize-sky
Fri May 22 11:47:01 1998  Doug Evans  <devans@canuck.cygnus.com>

        * config/tc-dvp.c (assemble_one_insn): Parse suffix operands
        even when missing in input string.

end-sanitize-sky
Thu May 21 15:02:41 1998  Nick Clifton  <nickc@cygnus.com>

        * config/tc-arm.c (find_real_start): Relax definition of local
        labels.

Tue May 19 16:59:44 1998  Nick Clifton  <nickc@cygnus.com>

        * config/tc-d30v.c (d30v_align): Apply address adjustment to all
        symbols at the given address, not just the last one specified.

Tue May 19 08:25:19 1998  Catherine Moore <clm@cygnus.com>

        * config/tc-sparc.c (sparc_handle_align): Use number_to_chars_bigendian
        or number_to_chars_littleendian to write data.

Mon May 18 17:09:30 1998  Nick Clifton  <nickc@cygnus.com>

        * config/tc-v850.c (md_assemble): Remove artificially created
        register name symbols.

Mon May 18 13:47:06 1998  Doug Evans  <devans@canuck.cygnus.com>

        * write.c (fixup_segment): Change "segment" to "section" in
        error message.

Mon May 18 16:55:40 1998  Michael Meissner  <meissner@cygnus.com>

        * write.c (fixup_segment): Change sym1-sym2 message again.

start-sanitize-r5900
Mon May 18 11:49:04 1998  Jeffrey A Law  (law@cygnus.com)

        * config/tc-mips.c (validate_mips_insn): Handle ';' opcode completer.
        (mips_ip): Likewise.

Mon May 18 12:37:38 1998  Frank Ch. Eigler  <fche@cygnus.com>

        * config/tc-mips.c (macro): For R5900, use "B" operand format for
        "break" instructions generated in macro (div etc.) instructions.

end-sanitize-r5900
Mon May 18 09:31:43 1998  Michael Meissner  <meissner@cygnus.com>

        * write.c (fixup_segment): Improve error message for sym1-sym2
        errors when sym1 is in a different segment from sym2.

Wed May 13 10:16:37 1998  Doug Evans  <devans@canuck.cygnus.com>

        * config/tc-m32r.c (warn_unmatched_high): New static local.
        (OPTION_WARN_PARALLEL): Rename from OPTION_WARN.
        (OPTION_NO_WARN_PARALLEL): Rename from OPTION_NO_WARN.
        (md_longopts): Recognize --{no-,}warn-unmatched-high.
        (md_parse_option): Likewise.
        (md_show_usage): Likewise.
        (m32r_frob_file): Likewise.

        * read.c (generate_file_debug,generate_lineno_debug): New functions.
        (read_a_source_file): Call them.
        * read.h (stabs_generate_asm_file): Declare.
        * stabs.c (stabs_generate_asm_file): New function.
        (generate_asm_file): New function.
        (stabs_generate_asm_lineno): Move file name handling into
        generate_asm_file.

Tue May 12 12:03:44 1998  Richard Henderson  <rth@cygnus.com>

        * config/tc-d30v.c (cur_mul32_p, prev_mul32_p): Make static.
        (d30v_current_align, d30v_current_align_seg): New variables.
        (d30v_last_label): New variable.
        (d30v_align, s_d30v_align, s_d30v_text): New functions.
        (s_d30v_data, s_d30v_section): Likewise.
        (md_pseudo_table): Call them.
        (md_begin): Initialize d30v_current_align_seg.
        (md_assemble): Call d30v_align when needed by known current alignment.
        (d30v_frob_label, d30v_cons_align): New functions.
        * config/tc-d30v.h (md_do_align): Remove.
        (tc_frob_label): Call d30v_frob_label.
        (md_cons_align): New.

        * config/tc-d30v.c (find_format): Convert complex expressions to 
        expression symbols before processing.  Clean up code formatting.

start-sanitize-sky
Mon May 11 12:48:33 1998  Doug Evans  <devans@canuck.cygnus.com>

        * config/tc-dvp.c (md_begin): Set type of output file to mips:r5900.

end-sanitize-sky
Sun May 10 22:35:02 1998  Jeffrey A Law  (law@cygnus.com)

        * po/Make-in (install-info): New target.

Thu May  7 15:49:07 1998  Jeffrey A Law  (law@cygnus.com)

        * config/tc-mn10200.c (md_assemble): Handle "bra" just like "jmp"
        instructions.
        * config/tc-mn10300.c (md_assemble): Likewise.

Thu May  7 11:47:22 1998  Doug Evans  <devans@canuck.cygnus.com>

        * Makefile.am: Update with `make dep-am'.
        (HFILES): Add cgen.h.
        (cgen.o): Depend on cgen.h.
        * Makefile.in: Regenerate.

        * cgen.c (cgen_md_apply_fix3): Don't pass newline to as_warn_where.

Thu May  7 13:20:56 1998  Anders Blomdell  <anders.blomdell@control.lth.se>

        * gasp.c (grab_label): Permit a label to be a preprocessor
        variable by permitting a label to start with a backslash.

Thu May  7 12:50:33 1998  Frank Ch. Eigler  <fche@cygnus.com>

        * config/tc-mips.c (validate_mips_insn): Removed hack
        for previously inaccessible bitfields in some INSN_TRAP
        instructions.

start-sanitize-d30v
Thu May  7 11:13:00 1998  Frank Ch. Eigler  <fche@cygnus.com>

        * config/tc-d30v.c (do_assemble): Abort with error message
        if opcode operands do not match.
        
end-sanitize-d30v
Thu May  7 09:36:06 1998  Frank Ch. Eigler  <fche@cygnus.com>

        * config/tc-mips.c (macro_build, validate_mips_insn): Implement
        'q' operand format for 20-bit "break"/"sdbbp" instructions.
        (mips_ip): Truncate overflowed "break" 'c' operand.  Implement
        similar new 'q' operand.

Thu May  7 07:47:14 1998  Michael Meissner  <meissner@cygnus.com>

        * cgen.c (cgen_asm_finish_insn): Fix typo.

Thu May  7 02:19:14 1998  Doug Evans  <devans@charmed.cygnus.com>

        * cgen.h: New file.
        * cgen.c: Include it.
        (MAX_FIXUPS): Renamed to CGEN_MAX_FIXUPS.
        (cgen_asm_finish_insn): Result is now void.  New arg `result'.
        All callers updated.
        * config/tc-m32r.c: Include cgen.h.
        (m23r_insn): New members num_fixups,fixups.
start-sanitize-m32rx
        (assemble_parallel_insn): Initialize debug_sym_link for each insn.
        (md_assemble): Simplify code to pack two insns in parallel.
        When swapping two insns, update their fixups.
end-sanitize-m32rx

start-sanitize-sky
Wed May  6 16:26:57 1998  Doug Evans  <devans@canuck.cygnus.com>

        * config/tc-dvp.c: Delete inclusion of "sysdep.h".

end-sanitize-sky
Wed May  6 16:29:19 1998  Jeffrey A Law  (law@cygnus.com)

        * config/tc-hppa.c (md_apply_fix): Slightly rework some code
        to avoid compiler warning.

Wed May  6 15:26:34 1998  Klaus Kaempf  <kkaempf@progis.de>

        * makefile.vms: Run dec c with /nodebug.  Pass CC value when
        calling make.

        * makefile.vms (OBJS): Add ehopt.obj

Wed May  6 15:11:12 1998  Klaus Kaempf  <kkaempf@progis.de>

        * doc/c-vax.texi: Correct and extend vax/vms documentation.

start-sanitize-d30v
Wed May  6 11:51:51 1998  Richard Henderson  <rth@cygnus.com>

        * config/tc-d30v.c (do_assemble): Accept a new parameter requesting
        a short format insn.
        (md_assemble): Set it for explicitly packed insns.
end-sanitize-d30v
        
Tue May  5 13:23:13 1998  Nick Clifton  <nickc@cygnus.com>

        * config/obj-coff.c (c_symbol_merge): Do not take address of
        native fields when performing the memcpy.

Tue May  5 13:10:41 1998  Gavin Koch  <gavin@cygnus.com>

        * config/tc-mips.c (macro,macro2): Implement 
        M_DMULO_I, M_MULO_I, M_DMULOU_I, and M_MULOU_I.

Mon May  4 17:49:14 1998  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>

        * config/tc-m68k.h (TC_RELOC_RTSYM_LOC_FIXUP): Changed to keep
        relocations against globally visible symbols.
        * config/tc-m68k.c (relaxable_symbol): New macro.
        (m68k_ip, md_estimate_size_before_relax): Use it.
        (tc_m68k_fix_adjustable): Also handle weak symbols.

Mon May  4 16:12:23 1998  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-i386.h (TC_RELOC_RTSYM_LOC_FIXUP): Keep relocs for all
        references to externally visible symbols.
        * config/tc-i386.c (md_apply_fix3): When OBJ_ELF, don't add the
        values in twice for a PC relative reloc if the symbol is
        externally defined.

        * config/tc-sparc.h (tc_fix_adjustable) [OBJ_AOUT]: When PIC,
        don't adjust a PC relative reloc against an externally visible
        symbol.
        * config/tc-sparc.c (md_apply_fix3): When generating a.out PIC,
        for a PC relative fixup against an externally visible defined
        symbol, arrange to store object file and addend values as though
        the symbol were not defined.
        (tc_gen_reloc): Likewise.

Thu Apr 30 13:09:39 1998  Fred Fish  <fnf@ninemoons.com>

        * read.c (sizeof_leb128): Referenced externally by write.c so
        don't inline.

Wed Apr 29 15:45:57 1998  Michael Meissner  <meissner@cygnus.com>

        * config/tc-m32r.c ({,expand_}debug_sym): New functions to record
        and expand a 'debug' symbol associated with the next instruction
        that does not cause a short instruction to be filled with a NOP.
        (md_pseudo_table): Add support for .debugsym.
        (assemble_parallel_insn): Add calls to expand_debug_sym as
        appropriate.
        (md_assemble): Ditto.

Tue Apr 28 19:16:26 1998  Tom Tromey  <tromey@cygnus.com>

        * as.c (main): Conditionally call setlocale.
        * gasp.c (main): Likewise.
        * asintl.h: Include <locale.h> if HAVE_LOCALE_H.
        (LC_MESSAGES): Now can be defined even when ENABLE_NLS.

start-sanitize-d30v
Tue Apr 28 18:33:23 1998  Frank Ch. Eigler  <fche@cygnus.com>

        * config/tc-d30v.c (md_show_usage): Correct gettext typo.
        
end-sanitize-d30v
Tue Apr 28 12:16:30 1998  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-hppa.c: Change all calls to bzero to use memset.
        (pa_ip): Add cast to avoid warning.
        (tc_gen_reloc, md_apply_fix): Likewise.
        (pa_find_space_by_number): Likewise.
        (hppa_force_relocation): Likewise.
        (pa_block): Change i to unsigned int.
        * config/obj-som.h (obj_som_copyright): Declare.

Tue Apr 28 11:35:56 1998  Frank Ch. Eigler  <fche@cygnus.com>

        * ecoff.c (ecoff_build_lineno): Do not use dummy first_lineno
        for line numbers for assembly source.

Mon Apr 27 15:58:46 1998  Ian Lance Taylor  <ian@cygnus.com>

        * configure.in: Change version number to 2.9.4
        * configure: Rebuild.

Mon Apr 27 12:07:33 1998  Doug Evans  <devans@seba.cygnus.com>

        * cgen.c (cgen_asm_finish_insn): New arg relax_p.  All callers updated.
start-sanitize-m32rx
        * config/tc-m32r.c (assemble_parallel_insn): No need to try
        non-relaxable variant any more.  Simplify test for nop insn.
        (md_assemble): Only scan operands if m32rx.  Set orig_insn in case
        scan of operands yields an insn different from original (e.g. a macro).
        Fix call to can_make_parallel.
end-sanitize-m32rx

Mon Apr 27 15:16:12 1998  Ian Lance Taylor  <ian@cygnus.com>

        * ecoff.h: Change symbolS in function declaration to struct
        symbol.

Sun Apr 26 13:44:22 1998  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-sh.c (parse_reg): Add casts to avoid warnings.
        (md_convert_frag): Fix i18n typo.

Sat Apr 25 20:12:02 1998  Richard Henderson  <rth@cygnus.com>

        * ecoff.c (ecoff_get_cur_proc_sym): New function.
        * ecoff.h: Protoype it.
        * config/tc-alpha.c [ELF] (s_alpha_prologue): New function.
        [EVAX] (s_alpha_prologue): Delete.
        (md_pseudo_table): Update.

Sat Apr 25 14:00:52 1998  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-i960.c (md_assemble): Change bp_error_msg from static
        array to local pointer.
        (get_args, parse_expr): Add casts to avoid warnings.

Fri Apr 24 12:47:42 1998  Philippe De Muyter  <phdm@macqel.be>

        * read.c (s_set): Cast xmalloc return value to fragS *.
        * config/tc-m68k.c (m68k_ip): Function made static to match
        previous forward declaration.
        (insert_reg, init_regtable, md_convert_frag_1): Likewise.

Fri Apr 24 09:26:46 1998  Nick Clifton  <nickc@cygnus.com>

        * config/tc-v850.c: Add internationalisation macros to error
        strings.  

        * config/tc-m32r.c (can_make_parallel): Add internationalisation
        macros to error strings.

Thu Apr 23 19:23:23 1998  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-ppc.c (ppc_fix_adjustable): Correct test of whether a
        reloc is in the TOC csect.
        (md_apply_fix3): Correct gettext typo.

Thu Apr 23 14:58:31 1998  Nick Clifton  <nickc@cygnus.com>

        * config/tc-arm.c (find_real_start): Ignore symbols starting with
        .L - they are local labels and the branches are not really
        function calls but rather far jumps.

start-sanitize-sky
Thu Apr 23 11:09:34 1998  Doug Evans  <devans@canuck.cygnus.com>

        * config/tc-dvp.c (dvp_frob_label): Don't emit _$ versions of
        local labels ($ prefix).

end-sanitize-sky
Wed Apr 22 15:57:21 1998  Tom Tromey  <tromey@cygnus.com>

        * po/Make-in (MKINSTALLDIRS): Don't look in $(top_srcdir).

Wed Apr 22 14:52:36 1998  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-i386.c (md_assemble): Print operand number rather than
        using ordinal_names.
        (i386_operand): Likewise.

Tue Apr 21 22:34:25 1998  Tom Tromey  <tromey@scribbles.cygnus.com>

        * Makefile.am (INTLLIBS): Define to work around apparent automake
        bug.
        All Makefiles: Regenerated.

        * Many files: Added gettext invocations around user-visible
        strings.
        * acconfig.h (ENABLE_NLS, HAVE_CATGETS, HAVE_GETTEXT, HAVE_STPCPY,
        HAVE_LC_MESSAGES): Define.
        * dep-in.sed: Added asintl.h.
        * po/Make-in: New file.
        * gasp.c (main): Call setlocale, bindtextdomain, and textdomain.
        Include "asintl.h".
        * read.c (Z_): Renamed from `_'.
        * Makefile.am (SUBDIRS): Added po.
        (POTFILES): new macro.
        (po/POTFILES.in): New target.
        ($(OBJS)): Added asintl.h.
        (HFILES): Likewise.
        (INCLUDES): Added -DLOCALEDIR, -I$(top_srcdir)/../intl.
        (as_new_LDADD): Added $(INTLLIBS).
        (as_new_DEPENDENCIES): Added $(INTLDEPS).
        (gasp_new_LDADD): Added $(INTLLIBS).
        (gasp_new_DEPENDENCIES): New macro.
        * configure, aclocal.m4: Rebuilt.
        * configure.in: Call CY_GNU_GETTEXT.  Generate po/Makefile.in and
        po/Makefile.
        (ALL_LINGUAS): Define.
        * macro.c: Include "asintl.h".
        * as.c (main): Call setlocale, bindtextdomain, and textdomain.
        * as.h: Include "asintl.h".
        * config/tc-i386.c (ordinal_names): Removed.
        (md_assemble): Changed error text to avoid ordinal_names.
        (i386_operand): Likewise.
        (reloc): Added as_bad to avoid i18n problems.
        (tc_gen_reloc): Likewise.
        * config/tc-arm.c (bad_args): Now a #define.
        (bad_pc): Likewise.
        * config/obj-vms.c (VMS_stab_parse): Changed type of
        `long_const_msg'.
        (global_symbol_directory): Unified strings to avoid i18n
        problems.
        * config/tc-m68k.c (get_reloc_code): Added some as_bad calls to
        avoid i18n problems.
        * config/tc-ns32k.c (reloc): Added as_bad to avoid i18n problems.
        * config/tc-ppc.c (md_apply_fix3): Added as_bad_where to avoid
        i18n problems.
        * config/tc-sh.c (md_convert_frag): Added as_bad to avoid i18n
        problems.
        * config/tc-v850.c (md_assemble): Changed C++ comment into C
        comment.
        * config/tc-vax.c (md_assemble): Added as_warn to avoid i18n
        problems.
        * as.c (print_version_id): Added an fprintf to avoid i18n
        problems.
        * cond.c (cond_finish_check): Added as_bad call to avoid i18n
        problems.
        * expr.c (expr): Added as_warn call to avoid i18n problems.
        * messages.c (as_assert): Changed code to avoid i18n problems.
        (as_abort): Likewise.
        * read.c (pseudo_set): Added as_bad call to avoid i18n problems.
        (s_space): Likewise.
        * po/Make-in, po/POTFILES.in, po/gas.pot: New files.

Tue Apr 21 17:01:22 1998  Alan Modra  <alan@spri.levels.unisa.edu.au>

        * config/tc-i386.c (check_prefix): New static function, split out
        from md_assemble.
        (struct _i386_insn): Add wait_prefix field.
        (md_assemble): Remove wait_prefix local variable.  Use
        check_prefix when adding a prefix.

        * config/tc-i386.c (current_templates): New static variable.
        (md_assemble): Remove current_templates local variable.
        (md_assemble, i386_operand): Improve error and warning messages in
        many places.  Add RESTORE_END_STRING in many places before error
        return.  Clarify some comments.

        * config/tc-i386.c (struct _i386_insn): Change seg field to a two
        element array.
        (md_assemble): Parse string instruction operands, looking for
        segment override prefixes.  Check for invalid segment prefixes on
        string instruction.
        (i386_operand): i.seg[] and max mem_operand changes for string
        insns.
        * config/tc-i386.h (EsSeg): Define.

        * config/tc-i386.h (regKludge): Define.
        (iclrKludge, imulKludge): Don't define.
        * config/tc-i386.c (md_assemble): Merge imulKludge and iclrKludge
        code.  Move ReverseRegRegmem fudges into Modrm case.  Reorder
        opcode_modifier checks to look for more common cases first.  Add
        default_seg for IsString case.

Tue Apr 21 16:18:12 1998  Ian Lance Taylor  <ian@cygnus.com>

        * configure.in: Call AM_PROG_LEX rather than AC_PROG_LEX and
        AC_DECL_YYTEXT.
        * configure: Rebuild with new automake and libtool.
        * aclocal.m4, Makefile.in: Likewise.

        * doc/Makefile.am (as.dvi): New target.
        * doc/Makefile.in: Rebuild.

start-sanitize-sky
Mon Apr 20 12:49:33 1998  Doug Evans  <devans@canuck.cygnus.com>

        * config/tc-dvp.c (VU_LABEL_PREFIX): Make "_$".

end-sanitize-sky
Sat Apr 18 01:21:04 1998  Stan Cox  <scox@cygnus.com>

        * configure.in: Added sparc86x support.
        
        * configure: Rebuild.
        
        * config/tc-sparc.c (lookup_arch): Added arch_type to struct
        sparc_arch.
        (md_parse_option): Warn if -EL is not supported for this architecture.

        * config/tc-sparc.h (SPARC_BIENDIAN) Always define.
        
Sat Apr 18 01:19:01 1998  Jeffrey A Law  (law@cygnus.com)

        * config/tc-mips.c (mips_ip): Note when we use get match on
        the full instruction name.
start-sanitize-r5900
        (mips_ip): For '&' DEST completer handling, if we got a full match
        then the DEST completer is implicitly .wxyz.
end-sanitize-r5900

start-sanitize-sky
Thu Apr 16 11:48:18 1998  Doug Evans  <devans@canuck.cygnus.com>

        * config/tc-dvp.c (unpackloc_sym): Delete.  All uses deleted.
        (vif_insn_type): New function.
        (md_apply_fix3): Don't validate user specified length if unpack insn
        and wl > cl.

end-sanitize-sky
Wed Apr 15 15:17:27 1998  Richard Henderson  <rth@cygnus.com>

        * symbols.c (resolve_symbol_value) [O_symbol]: Also store the symbol
        back into the expression to handle add/sub simplification correctly.

start-sanitize-r5900
Wed Apr 15 10:35:59 1998  Frank Ch. Eigler <fche@cygnus.com>
 
        * config/tc-mips.c (mips_ip): Specs changed for
        VCALLMSR instruction.
 
end-sanitize-vr5900
start-sanitize-vr5400
Wed Apr 15 07:06:04 1998  Catherine Moore  <clm@cygnus.com>
 
        * config/tc-mips.c (hilo_interlocks): Remove VR5400.
 
end-sanitize-vr5400
Wed Apr 15 07:06:04 1998  Catherine Moore  <clm@cygnus.com>

        * config/tc-mips.c (hilo_interlocks): Remove 4300.

Mon Apr 13 16:51:04 1998  Nick Clifton  <nickc@cygnus.com>

        * config/tc-arm.c (do_msr): Support undocumented 'msr cpsr_flg,
        #<n>' instruction.

start-sanitize-sky
Mon Apr 13 12:18:53 1998  Doug Evans  <devans@canuck.cygnus.com>

        * config/tc-dvp.c (md_apply_fix3): Mark fixup for mpg loaded vu
        branch error as being done so we don't try to emit a reloc.

end-sanitize-sky
Thu Apr  9 10:29:42 1998  Doug Evans  <devans@canuck.cygnus.com>

        * symbols.c (max_indent_level): New global.
        (print_symbol_value_1): Use it.
        * expr.h (expr_build_dot): Declare.
        * expr.c (expr_build_dot): New function.
start-sanitize-sky
        * config/tc-dvp.c (VU_LABEL_PREFIX): New macro.
        (compute_mpgloc): New function.
        (eval_expr): New arg `cpu'.  All callers updated.
        (non_vu_insn_seen_p): New static global.
        (RELAX_{MPG,DIRECT,VU,ENCODE,GROWTH,DONE_}): New macros.
        (struct dvp_fixup): New member `cpu'.
        (assemble_one_insn): New args init_fixup_count, fixup_offset.
        All callers updated.
        (md_assemble): Set non_vu_insn_seen_p as appropriate.
        (assemble_vif): Set `cpu' field of fixup.
        Clean up calls to frag_var.  Recorded mpgloc is now in bytes.
        (assemble_vu_insn): Delete, contents moved into ...
        (assemble_vu): ... here.  Don't record fixups until after parsing
        both upper and lower insns.  If branch insn inside mpg, properly
        compute target address.
        (dvp_frob_label): Create copies of vu labels inside mpg's.
        (dvp_relax_frag): Clean up.
        (md_convert_frag): Ditto.
        (md_apply_fix3): Signal error if mpg embedded vu code has branch
        to undefined label (not currently supported).
        (eval_expr): New arg `cpu'.  All callers updated.
        (insert_operand_final): Convert mpgloc from bytes to dwords.
        (s_endmpg): Use compute_mpgloc to update $.mpgloc.
        (s_state): If switching to vu state, initialize $.mpgloc.
end-sanitize-sky

Wed Apr  8 16:16:11 1998  Doug Evans  <devans@canuck.cygnus.com>

        * symbols.c (print_binary): New function.
        (print_expr_1): Call it.

start-sanitize-sky
Tue Apr  7 12:21:39 1998  Doug Evans  <devans@canuck.cygnus.com>

        * config/tc-dvp.c (md_convert_frag): Fix thinko.

Mon Apr  6 17:08:47 1998  Doug Evans  <devans@canuck.cygnus.com>

        * config/tc-dvp.c (assemble_vif): Watch for macro insns.
        0 is a valid length value (= max+1).
        (install_vif_length): 0 is a valid length value (= max+1).

end-sanitize-sky
Mon Apr  6 12:06:39 1998  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>

        * config/tc-m68k.c (m68k_ip, case "#B"): Install the offset of the
        operand in the opcode.

start-sanitize-sky
Fri Apr  3 12:13:03 1998  Doug Evans  <devans@canuck.cygnus.com>

        * config/tc-dvp.c (assemble_vif): Put relaxable insns in their
        own fragment.

end-sanitize-sky
Fri Apr  3 11:58:19 1998  Alan Modra  <alan@spri.levels.unisa.edu.au>

        * config/tc-i386.h: Reorder operand flags and opcode modifier
        flags for clarity.  Remove unused definitions: Unknown,
        ImmUnknown, DispUnknown, NoModrm.
        * config/tc-i386.c (type_names): Add missing Debug type.
        (md_assemble): Better duplicate prefix checking.  Quicker string
        instruction check via new opcode_modifier flag.

Fri Apr  3 11:44:34 1998  Ian Lance Taylor  <ian@cygnus.com>

        * doc/as.texinfo (Invoking): Clarify -Wa example.

Fri Apr  3 09:12:23 1998  Gavin Koch  <gavin@cetus.cygnus.com>

        * config/tc-mips.c (mips_pseudo_table): Add weakext entry. 
        (s_mips_weakext): Define.
        * ecoff.c (ecoff_directive_weakext): Don't define if defined(TC_MIPS).
        * config/obj-ecoff.c (obj_pseudo_table): Don't add weakext if 
        defined(TC_MIPS).       
        
Thu Apr  2 22:42:02 1998  Jeffrey A Law  (law@cygnus.com)

        * config/tc-mn10200.c (tc_gen_reloc): The difference of two symbols
        is an error if the value can not be computed at assembly time.
        * config/tc-mn10300.c (tc_gen-reloc): Likewise.

Thu Apr  2 16:36:47 1998  Ian Lance Taylor  <ian@cygnus.com>

        * gasp.c (main): Set next field of new include_path structure to
        NULL.  From Avery Pennarun <averyp@gdc.ca>.

        * read.c (s_mri_sect): Call as_bad rather than abort for an
        unsupported MRI target.

Wed Apr  1 11:08:27 1998  Nick Clifton  <nickc@cygnus.com>

        * config/tc-arm.c (arm_validate_fix): New function.  Determine if
        the destination of a branch instruction should be altered.
        (find_real_start): New function:  Locate the real, Thumb coded
        start of a Thumb function.
        (do_t_branch23): Alter the destination of branches to Thumb
        functions. 

        * config/tc-arm.h: Define TC_VALIDATE_FIX.

Tue Mar 31 13:27:33 1998  Dean M. Deaver  <deaver@amt.tay1.dec.com>

        * config/tc-arm.c (decode_shift): Handle addressing mode 2 w/rrx
        also.

Wed Apr  1 13:13:20 1998  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>

        * doc/as.texinfo: Use @itemx for a secondary item in a table.
        * doc/c-hppa.texi: Likewise.

Tue Mar 31 17:52:40 1998  Ian Lance Taylor  <ian@cygnus.com>

        * Makefile.am: Rebuild dependencies.
        * Makefile.in: Rebuild.

        * Makefile.am (DEP_INCLUDES): New variable.
        (.dep1): Change to work when srcdir is not an absolute path.
        (.tcdep, .objdep, .dep2, dep.sed): Likewise.
        * Makefile.in: Rebuild.

Mon Mar 30 12:46:48 1998  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-i386.h, config/tc-i386.c: Revert March 24
        LinearAddress patch.

        * configure.in: Set version to 2.9.1.
        * configure: Rebuild.

        * Branched binutils 2.9.

Mon Mar 30 11:22:08 1998  Alan Modra  <alan@spri.levels.unisa.edu.au>

        * config/tc-i386.h (FWait): Define.
        * config/tc-i386.c (md_assemble): Emit fwait prefix before any
        other prefixes.  Check FWait flag in opcode table to see which
        instructions require an fwait prefix.

Mon Mar 30 10:12:00 1998  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>

        * stabs.c (get_stab_string_offset): Always create a stab string
        section.

Sat Mar 28 22:28:02 1998  Ian Lance Taylor  <ian@cygnus.com>

        Fix some gcc -Wall warnings:
        * atof-generic.c (atof_generic): Add casts to avoid warnings.
        * ehopt.c (eh_frame_code_alignment): Likewise.
        * expr.c (integer_constant, operand): Likewise.
        * frags.c (frag_align): Likewise.
        * gasp.c (level_0, change_base, doinstr): Likewise.
        * hash.c (hash_ask): Likewise.
        * listing.c (listing_page, calc_hex, print_lines): Likewise.
        (debugging_pseudo): Likewise.
        * macro.c (define_macro, check_macro): Likewise.
        * read.c (read_a_source_file, s_align, s_float_space): Likewise.
        (ignore_rest_of_line, float_cons): Likewise.
        * symbols.c (decode_local_label_name): Likewise.
        * write.c (record_alignment, cvs_frag_to_fill): Likewise.
        (fixup_segment, number_to_chars_bigendian): Likewise.
        (number_to_chars_littleendian): Likewise.
        * config/atof-ieee.c (gen_to_words): Likewise.
        * config/tc-sparc.c (md_begin, md_assemble): Likewise.
        (sparc_ip, parse_keyword_arg, s_common): Likewise.
        * read.c (output_big_sleb128): Initialize locals to avoid
        warnings.
        (output_big_uleb128, equals): Likewise.
        * atof-generic.c (atof_generic): Change number_of_digits_* locals
        to unsigned int.  Change zeros to unsigned int.
        * cond.c (s_if): Add return to default case.
        * frags.c (frag_now_fix): Change return type to addressT.
        * frags.h (frag_now_fix): Update declaration.
        * listing.c (file_info_struct): Change linenum to unsigned int.
        (struct list_info_struct): Change hll_line to unsigned int.
        (print_source): Update format string.
        * read.c (emit_expr): Change scan to unsigned int, and don't
        bother to initialize it.
        * symbols.c (dollar_label_count): Change to unsigned long.
        * write.c (adjust_reloc_syms): Remove unused label reduce_fixup.
        * config/tc-sparc.c (sparc_memory_model): Only define if OBJ_ELF.
        * config/tc-sparc.c (tc_gen_reloc): Add return to default case.

Fri Mar 27 12:46:47 1998  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-m68k.c (m68k_ip): Check legal addressing modes for
        mcf5200 just as we do for m68000.
        (m68k_init_after_args): Likewise.
        (md_estimate_size_before_relax): Likewise.

Fri Mar 27 10:30:01 1998  Catherine Moore  <clm@cygnus.com>

        * config/tc-v850.c (md_assemble):  Store relocation addend in
        fixup instead of instruction.

Thu Mar 26 23:07:18 1998  Alan Modra  <alan@spri.levels.unisa.edu.au>

        * config/tc-i386.c (md_assemble): Swap template arguments to
        CONSISTENT_REGISTER_MATCH macro in reverse direction test.
        This macro is currently symmetric, so passing them the wrong
        way didn't cause any problem, but may if the macro is changed
        in the future.
        After copying template to i.tm, use i.tm. rather than t-> to
        access fields, and make t a const*
        Move i.tm.operand_types[] swap to immediately after the copy.

start-sanitize-sky
Thu Mar 26 13:29:59 1998  Doug Evans  <devans@canuck.cygnus.com>

        * config/tc-dvp.c (s_endunpack): Round up to word boundary after
        we've computed the data length.

end-sanitize-sky
Wed Mar 25 13:44:18 1998  Doug Evans  <devans@canuck.cygnus.com>

        * expr.h (expr_build_uconstant): Add prototype.
        (expr_build_unary,expr_build_binary): Add prototypes.
        * expr.c (expr_build_uconstant): New function.
        (expr_build_unary,expr_build_binary): New functions.
start-sanitize-sky
        * config/tc-dvp.h (md_estimate_size_before_relax): Delete.
        (md_convert_frag): Delete.
        (TC_FIX_TYPE): New fields wl,cl,user_value;
        * config/tc-dvp.c (insert_mpg_marker): New argument ignore.
        All callers updated.
        (insert_unpack_marker): New function.
        (insert_file): New argument insert_marker_arg.  All callers updated.
        (gif_user_value): New static local.
        (vif_data_start,vif_data_end): New static locals.
        (mpgloc_sym,unpackloc_sym): New static locals.
        (cur_varlen_frag,cur_varlen_insn,cur_varlen_value): Delete.
        (cur_opcode,cur_operand): New static locals.
        (endmpg_caller): New enum.
        (md_pseudo_table): Pass ENDMPG_USER to s_endmpg.
        (md_begin): Initialize mpgloc_sym, unpackloc_sym.
        (dvp_fixup): New members user_value,wl,cl;
        (assemble_vif): Rewrite.
        (assemble_gif): Tweak name of data start label.
        (assemble_one_insn): Allow special parser to punt and call the
        normal expression parser.  Set cur_opcode,cur_operand for md_operand.
        (md_operand): Handle '*' value for mpgloc,unpackloc.
        (md_estimate_size_before_relax): New function.
        (dvp_relax_frag,md_convert_frag): New functions.
        (md_pcrel_from_section): Handle end data label for variable length
        vif insns.
        (md_apply_fix3): Handle count field for variable length vif insns.
        Handle address field for mpg,unpack.
        (eval_expr): Initialize user_value,wl,cl fields of the fixup.
        (cur_vif_insn_length): Delete.
        (vif_length_value): New function.
        (install_vif_length): Don't perform logical->physical conversion here.
        (s_enddirect,s_endmpg,s_endunpack): Rewrite.
end-sanitize-sky

Wed Mar 25 13:10:42 1998  Bruno Haible  <bruno@linuix.mathematik.uni-karlsruhe.de>

        * gasp.c (IS*): Cast argument to unsigned char, not unsigned int.
        * macro.c (macro_expand_body): Increase buffer size.
        * messages.c (as_warn): Likewise.
        (as_warn_where, as_bad, as_bad_where): Likewise.

Wed Mar 25 12:59:07 1998  Ian Lance Taylor  <ian@cygnus.com>

        Based on patch from H.J. Lu  <hjl@gnu.org>:
        * Makefile.am (DISTSTUFF): New variable.
        (diststuff): New target.
        * Makefile.in: Rebuild.

Tue Mar 24 16:51:29 1998  Nick Clifton  <nickc@cygnus.com>

        * config/tc-m32r.h (md_cleanup, md_elf_section_change_hook): Call
        m32r_elf_section_change_hook.

        * config/tc-m32r.c (m32r_elf_section_change_hook): New function to
        emit a nop if a section ends with a 16 bit instruction.

Tue Mar 24 19:48:09 1998  Ian Lance Taylor  <ian@cygnus.com>

        * config/obj-coff.c (obj_coff_bss): Compile unconditionally.  Call
        s_lcomm rather than obj_coff_lcomm.
        (obj_pseudo_table): Compile .bss pseudo-op unconditionally.

Tue Mar 24 18:30:58 1998  H.J. Lu  <hjl@gnu.org>

        * config/tc-i386.h (LinearAddress): Define.
        * config/tc-i386.c (md_assemble): If LinearAddress is set for the
        instruction, don't use a default segment.

Mon Mar 23 18:53:40 1998  Joel Sherrill  <joel@OARcorp.com>

        * configure.in: (sh*-*-rtems*): Switched from ELF to COFF.
        * configure: Rebuild.

start-sanitize-sky
Mon Mar 23 13:16:22 1998  Doug Evans  <devans@canuck.cygnus.com>

        * config/tc-dvp.c (insert_mpg_marker): Update mpgloc.

end-sanitize-sky
start-sanitize-r5900
Sun Mar 22 13:21:01 1998  Jeffrey A Law  (law@cygnus.com)

        * config/tc-mips.c (validate_mips_insn): Handle r5900 operands.

        * config/tc-mips.c (append_insn): Handle BFD_RELOC_MIPS16_S3.
        (mips_ip): Handle 'O' operand.
        (md_apply_fix): Handle BFD_RELOC_MIPS16_S3.

end-sanitize-r5900
Fri Mar 20 19:15:44 1998  Ian Lance Taylor  <ian@cygnus.com>

        * aclocal.m4, configure: Rebuild with libtool 1.2.

start-sanitize-r5900
Fri Mar 20 09:04:13 1998  Jeffrey A Law  (law@cygnus.com)

        * config/tc-mips.c: Change '%' to '#' in r5900 code to avoid conflict
        with vr5400 support.

end-sanitize-r5900
Thu Mar 19 16:03:12 1998  Nick Clifton  <nickc@cygnus.com>

        * config/tc-arm.c (md_apply_fix3): fix code to test the range of
        PC relative branches.  Patch courtesy of Jonathan Walton. 

start-sanitize-r5900
Thu Mar 19 14:19:27 1998  Jeffrey A Law  (law@cygnus.com)

        * config/tc-mips.c (mips_ip): Handle opcodes which have the form
        "name.completer" where only the name is actually in the opcode
        table.  Allow various operands for base register in load/store
        instructions.  Handle various new argument characters for the
        cop2/vu0 co-processor.

end-sanitize-r5900
start-sanitize-sky
        Wed Mar 18 13:54:04 1998  Frank Ch. Eigler  <fche@cygnus.com>

        * config/tc-dvp.c (s_dmadata): Force 16-byte alignment for ".dmadata"
        pseudo-op.
end-sanitize-sky
        
Wed Mar 18 09:29:51 1998  Nick Clifton  <nickc@cygnus.com>

        * configure.in (emulations): Add thumb-pe target.

        * configure (emulations): Add thumb-pe target.

1998-03-17  Ken Raeburn  <raeburn@cygnus.com>

        * itbl-lex.l (yywrap): Don't define if already defined as a
        macro.

start-sanitize-sky
Tue Mar 17 10:40:54 1998  Doug Evans  <devans@canuck.cygnus.com>

        * config/tc-dvp.c (md_begin): Turn dma/vif packing on by default.
        (assemble_dma): Only output 8 bytes for actual dma insn if dma/vif
        packing is enabled.  Emit VIF cpu marker after dma insn.

        * config/tc-dvp.h (TC_START_LABEL): Define.
        * config/tc-dvp.c (force_mach_label): New function.
        (md_begin,create_colon_label,s_dmadata): Use it.

        * config/tc-dvp.c (s_enddmadata): Always fill dma data out to 16
        byte boundary.

Mon Mar 16 10:19:44 1998  Doug Evans  <devans@canuck.cygnus.com>

        * config/tc-dvp.c (md_pseudo_table): Make .quad 16 bytes.

end-sanitize-sky
Fri Mar 13 16:31:38 1998  Tom Tromey  <tromey@cygnus.com>

        * depend.c (quote_string_for_make): New function.
        (wrap_output): Use it.

Thu Mar 12 18:28:22 1998  Nick Clifton  <nickc@cygnus.com>

        * config/obj-elf.c (obj_elf_section): Set bss flag in seg_info
        structure if type is SHT_NOBITS.  [Bug fix courtesy of rth]

start-sanitize-sky
Thu Mar 12 16:13:25 1998  Doug Evans  <devans@canuck.cygnus.com>

        * config/tc-dvp.h (TC_FIX_TYPE,TC_INIT_FIX_DATA): Define.
        * config/tc-dvp.c (compute_nloop,check_nloop): New functions.
        (gif_insn_frag_loc): New static global.
        (assemble_gif): Record frag and location frag of insn.
        (md_apply_fix3): Validate user specified nloop if we couldn't do
        it earlier.
        (s_endgif): Queue fixup to install nloop if we can't compute it here.

Fri Mar  6 11:36:37 1998  Doug Evans  <devans@canuck.cygnus.com>

        * config/tc-dvp.c (s_endgif): Fix nloop calc and test.  Warn if
        insufficient data present.  Fix insertion of computed nloop value.
        (install_vif_length): Second pass at unpack len calcs.
        (s_endunpack): Round data up to word boundary.
        (insert_mpg_marker): New function.
        (insert_file): New args insert_marker, size.  All callers updated.
        (assemble_vif): Rewrite varlen insn handling.
        (assemble_vu): Call insert_mpg_marker when 256th insn reached.
        (s_enddirect,s_endunpack): Rename arg to internal_p.

end-sanitize-sky
start-sanitize-vr4320
Tue Mar  3 11:37:26 1998  Gavin Koch  <gavin@cygnus.com>

        * config/tc-mips.c : Added vr4320 similar to vr4300.
        
end-sanitize-vr4320
Sat Feb 28 17:28:55 1998  Richard Henderson  <rth@cygnus.com>

        * config/tc-alpha.c (md_shortopts, md_longopts, md_parse_option):
        Recognize -GN and -relax.
        (md_begin): Initialize gp size from -G switch.
        (alpha_force_relocation): Always force if -relax.
        (alpha_align): Take a new argument that will specify when to 
        emit an R_ALPHA_ALIGN relocation (though we don't do that now).
        Change all callers.  Emit nop alignment padding as nop+unop pair.

Sat Feb 28 17:06:22 1998  Richard Henderson  <rth@cygnus.com>

        * config/obj-elf.c [TC_ALPHA]: Include <elf/alpha.h>.
        * config/tc-alpha.h (ELF_TC_SPECIAL_SECTIONS): New.

start-sanitize-d30v
Thu Feb 26 15:49:04 1998  Michael Meissner  <meissner@cygnus.com>

        * config/tc-d30v.c (write_2_short): Delayed jsr instructions don't
        require padding to the next long word boundary.

end-sanitize-d30v
start-sanitize-sky
Fri Feb 27 10:06:59 1998  Doug Evans  <devans@canuck.cygnus.com>

        * config/tc-dvp.c (assemble_vif): Insert cpu type marker before
        inserted binary files.

end-sanitize-sky
start-sanitize-phase2-m32rx
Wed Feb 25 11:43:45 1998  Doug Evans  <devans@canuck.cygnus.com>

        * config/tc-m32r.c (optimize): New static local.
        (md_shortopts): Add -O.
        (md_parse_option): Recognize it.
        (md_show_usage): Document it.
        (md_assemble): Don't try to combine insns in parallel if !optimize.

end-sanitize-phase2-m32rx
start-sanitize-m32rx
Tue Feb 24 18:03:25 1998  Nick Clifton  <nickc@cygnus.com>

        * config/tc-m32r.c (first_writes_to_seconds_operands):
        Reinitialise b_operands for each pass of the inner loop.
end-sanitize-m32rx
start-sanitize-sky
Tue Feb 24 11:01:25 1998  Doug Evans  <devans@canuck.cygnus.com>

        * config/tc-dvp.h (tc_frob_label): Define.
        * config/tc-dvp.c (dvp_frob_label): New function.
        (create_colon_label): New argument `sto'.  All callers updated.
        (record_mach): New argument `force_next_p'.  All callers updated.
        (cpu_sto): New function.
        (UNIQUE_LABEL_PREFIX): New macro.
        (unique_label): Use it.
        (assemble_gif): Emit start label before mach label.
        (s_endgif): Update.  NLOOP is in quadwords for IMAGE mode now.

Mon Feb 23 15:55:12 1998  Doug Evans  <devans@canuck.cygnus.com>

        * config/tc-dvp.c (assemble_dma): Do alignment before parsing insn.
        (setup_dma_autocount): Renamed from setup_autocount.  New argument
        inline_p.  All callers changed.  Fix word address of count.
        (parse_dma_addr_autocount): Fix word address of address.

end-sanitize-sky
start-sanitize-sky
Mon Feb 23 17:24:06 1998  Jim Lemke  <jlemke@cygnus.com>

        * config/obj-elf.c: Take Ian's suggestion, leave .bss etc
        in special_sections table and add .vubss etc via
        ELF_TC_SPECIAL_SECTIONS.
        * config/tc-dvp.h: Likewise.

end-sanitize-sky
Mon Feb 23 11:29:06 1998  Doug Evans  <devans@seba.cygnus.com>

        * cgen.c: #include symcat.h.
        * config/tc-m32r.c: Likewise.

Mon Feb 23 10:27:40 1998  Jeffrey A Law  (law@cygnus.com)

        * config/tc-mips.c (mips_ip, case 'P'): Make 'P' arguments be
        absolute expressions instead of '$' prefixed register names.

Sat Feb 21 22:36:52 1998  Richard Henderson  <rth@cygnus.com>

        * read.c (s_set): Record file and line info for symbols when -as.
        (pseudo_set): Don't overwrite that dummy fragment.

start-sanitize-sky
Fri Feb 20 12:43:02 1998  Doug Evans  <devans@canuck.cygnus.com>

        * config/tc-dvp.c (md_assemble): Handle ASM_DIRECT state.
        (dvp_parse_done): Comment out contents.
        (s_enddirect,s_endmpg,s_endunpack): Call demand_empty_rest_of_line.
        (s_state): Handle .vu in included file.
        (asm_state): New state ASM_GIF.
        (asm_state_stack): Maintain stack of parsing states.
        ({push,pop,set}_asm_state): New functions.
        (CUR_ASM_STATE): Renamed from cur_asm_state, all uses updated.
        (gif_{insn_type,data_name,insn_frag}): New static locals.
        (md_assemble): Watch for .endgif if in ASM_GIF state.
        (assemble_gif): Complete.
        (s_endgif): Complete.
        (cur_mach): New static local.
        (record_mach): New function.
        (md_begin): Initialize `cur_mach'.
        (assemble_*): Record current mach type.
        (vu_count): New static local.
        (assemble_vif): Temporary hack to properly align mpg/direct data.
        (assemble_vu): Insert mpg every 256 insns.

end-sanitize-sky
Fri Feb 20 15:03:13 1998  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-ppc.c (md_pseudo_table): Add "section".
        (ppc_named_section): New static function.

Thu Feb 19 22:25:42 1998  Richard Henderson  <rth@cygnus.com>

        * tc-ppc.c (ppc_biei): Cache the last symbol we inserted
        so we don't have to scan the entire list.

start-sanitize-d30v
Tue Feb 17 17:02:15 1998  Fred Fish  <fnf@cygnus.com>

        * config/tc-d30v.c (parallel_ok): For the explicitly parallel
        case, allow the parallel instructions to modify the same flag
        bits.

end-sanitize-d30v
Thu Feb 19 16:08:15 1998  Richard Henderson  <rth@cygnus.com>

        * listing.c (list_symbol_table): Categorize symbols by
        undefined_section rather than sy_frag->line == NULL.

start-sanitize-sky
Thu Feb 19 02:17:03 1998  Doug Evans  <devans@charmed.cygnus.com>

        * config/tc-dvp.c (LOCAL_LABEL_PREFIX,END_LABEL_PREFIX): New macros.
        (inline_dmadata): Renamed from s_dmadata_implied.
        (assemble_one_insn): Rewrite dma operand processing.
        (md_apply_fix3): Handle DVP_OPERAND_DMA_NEXT.
        (unique_name,setup_autocount): New functions.

        * config/tc-dvp.c: Include stdarg.h/varargs.h.
        (md_pseudo_table): Add .word.
        (assemble_dma): Set alignment to 16 bytes.  Enable code that records
        fixups.
        (assemble_one_insn): Handle DVP_OPERAND_DMA_{ADDR,AUTOCOUNT}.
        (md_apply_fix3): Handle DVP_OPERAND_DMA_ADDR.
        (parse_dma_addr_autocount): Renamed from parse_dma_ptr_autocount.
        Rewrite.
        (eval_expr): New function.
        (create_label,create_colon_label): New function.
        (s_enddmadata): Rewrite.

end-sanitize-sky
Wed Feb 18 23:39:46 1998  Richard Henderson  <rth@cygnus.com>

        * Makefile.am (install-exec-local): Install properly when ln
        fails or tooldir == prefix.

start-sanitize-m32rx
Wed Feb 18 18:11:42 1998  Nick Clifton  <nickc@cygnus.com>

        * config/tc-m32r.c (first_writes_to_seconds_operands): Special
        handling of updates to the condition bit as this is shadow by
        several registers.
end-sanitize-m32rx
start-sanitize-sky
Wed Feb 18 15:49:56 1998  Doug Evans  <devans@canuck.cygnus.com>

        * config/tc-dvp.c (parse_float): New function.
        (assemble_vu): Handle loi insns.
        (assemble_one_insn): Simplify suffix parsing.
        Handle DVP_OPERAND_FLOAT.  Allow FAKE arguments to have a parser
        handler.

end-sanitize-sky
start-sanitize-m32rx
Wed Feb 18 14:30:26 1998  Nick Clifton  <nickc@cygnus.com>

        * doc/c-m32r.texi (M32R-Opts): Add --Wp and --Wnp.

        * doc/as.texinfo (Overview): Add --Wp and --Wnp.

        * config/tc-m32r.c (md_longopts): Accept --Wp as an abbreviation
        for --warn-explicit-parallel-conflicts and --Wnp as an
        abbreviation for --no-warn-explicit-parallel-conflicts.
        (assemble_parallel_insn): Use non-relaxable versions of branch
        instructions. 

Wed Feb 18 11:00:18 1998  Nick Clifton  <nickc@cygnus.com>

        * app.c: Parse || as a seperator between assembler statements.

end-sanitize-m32rx
Tue Feb 17 18:58:51 1998  Doug Evans  <devans@seba.cygnus.com>

        * cgen.c (cgen_md_apply_fix3): Delete call to validate_operand.
        Test result of insert_operand for error.

start-sanitize-m32rx
Mon Feb 16 12:28:40 1998  Nick Clifton  <nickc@cygnus.com>

        * config/tc-m32r.c (md_assemble): Only parallelise instructions
        when m32rx target is enabled and the instructions are not
        relaxable. 

Fri Feb 13 14:42:16 1998  Nick Clifton  <nickc@cygnus.com>

        * config/tc-m32r.c (first_writes_to_seconds_operands): Do not
        bother checking insn which have no operands.

end-sanitize-m32rx
Fri Feb 13 16:41:42 1998  Ian Lance Taylor  <ian@cygnus.com>

        * Makefile.am (AUTOMAKE_OPTIONS): Add cygnus.
        * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
        * doc/Makefile.am (AUTOMAKE_OPTIONS): Define.
        * doc/Makefile.in: Rebuild.

start-sanitize-m32rx
Fri Feb 13 09:57:11 1998  Nick Clifton  <nickc@cygnus.com>

        * config/tc-m32r.c (first_writes_to_seconds_operands): New
        function.  Replaces get_src_reg(), check_for_side_effects(),
        reads_from_src_reg().  Uses new insn operand features of cgen.
        (writes_to_pc): New function., but with new code suppressed for now.
        (md_assemble): Call first_writes_to_seconds_operands().
end-sanitize-m32rx
Fri Feb 13 00:47:44 1998  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-mips.c (macro_build): Handle operand type 'C'.
        (macro): Fix handling of M_COP[0-3].

Thu Feb 12 14:06:59 1998  Ian Lance Taylor  <ian@cygnus.com>

        Based on patches from Ross Harvey <ross@teraflop.com>:
        * macro.c (ISSEP): Only treat '<' and '>' as separator characters
        if macro_alternate or macro_mri.
        (getstring): Remove support for byte constants between < and >.
        (get_any_string): '<' only starts a string if macro_alternate or
        macro_mri.
        (macro_expand_body): Permit keyword parameters following
        positional parameters.

        NetBSD patches from Gordon W. Ross <gwr@mc.com>:
        * configure.in (alpha*-*-netbsd*): New target.
        * config/te-nbsd.h (LOCAL_LABELS_FB): Define.
        * configure: Rebuild.

        * as.h (flag_warn_suppress_instructionswap): Move from here...
        * config/tc-d10v.c (flag_warn_suppress_instructionswap): ...to
        here, and make static.

        * ehopt.c (eh_frame_code_alignment): Only use seg_info if
        BFD_ASSEMBLER or MANY_SEGMENTS.

        * as.c (show_usage): Update bug-gnu-utils address.
        * gasp.c (show_usage): Likewise.
        * doc/as.texinfo (Bug Reporting): Likewise.

Wed Feb 11 23:26:28 1998  Jeffrey A Law  (law@cygnus.com)

        * config/tc-mips.c (load_address): Don't use mips III or mips IV
        insns regardless of the size of a pointer if we're in mips I or
        MIPS II mode.
        (macro, macro2, s_cprestore, s_cpadd): Likewise.

Thu Feb 12 03:41:00 1998  J"orn Rennecke  <amylaar@cygnus.co.uk>

Fix rac to accept only a0:
        * tc-d10v.c (parallel_ok, find_opcode):
        Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
        Introduce OPERAND_GPR.

Wed Feb 11 16:28:13 1998  Richard Henderson  <rth@cygnus.com>

        * read.c (s_fill): Handle non-constant repeat counts by creating
        an rs_space fragment.

start-sanitize-m32rx
Wed Feb 11 10:32:28 1998  Nick Clifton  <nickc@cygnus.com>

        * doc/c-m32r.texi: Document warning and error messages.  Add
        descriptions of --warn-explicit-parallel-conflicts.

        * doc/as.texinfo: Add more m32rx command line options.

end-sanitize-m32rx
Tue Feb 10 18:31:31 1998  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-i386.c (i386_operand): Change error added Jan 2 1998
        from as_bad to as_warn.

start-sanitize-sky
Tue Feb 10 15:15:40 1998  Doug Evans  <devans@canuck.cygnus.com>

        * config/tc-dvp.c (*): pke->vif, gpuif->gif.

end-sanitize-sky
Tue Feb 10 18:04:00 1998  Jim Lemke  <jlemke@cygnus.com>

        * as.c: (perform_an_assembly_pass): Use [TEXT|DATA|BSS]_SECTION_NAME
        * as.h: Define default values of [TEXT|DATA|BSS]_SECTION_NAME
        * config/obj-elf.c (elf_begin): Use [TEXT|DATA|BSS]_SECTION_NAME
start-sanitize-sky
        * config/tc-dvp.h: Add configuration specific section names.
end-sanitize-sky

Tue Feb 10 17:58:18 1998  Ian Lance Taylor  <ian@cygnus.com>

        * ehopt.c (eh_frame_code_alignment): If not BFD_ASSEMBLER, use
        seg_fix_rotP rather than fix_root from seg_info.

Tue Feb 10 15:32:22 1998  Ian Carmichael  <iancarm@cygnus.com>

        * expr.c: Add support for 0x1_2_3_4 bignums.

Tue Feb 10 14:43:40 1998  Ian Lance Taylor  <ian@cygnus.com>

        * configure.in: Change -linux* to -linux-gnu*.
        * configure: Rebuild.

        * app.c (do_scrub_begin): Treat \r as whitespace.

start-sanitize-m32rx
Mon Feb  9 16:23:11 1998  Nick Clifton  <nickc@cygnus.com>

        * config/tc-m32r.c (get_src_reg): Use m32r_cgen_get_operand()
        rather than parsing syntax string manually.
        (assemble_parallel_insn): Check for both forms of parallel
        conflict. 
end-sanitize-m32rx
Mon Feb  9 14:16:11 1998  Ian Lance Taylor  <ian@cygnus.com>

        * Makefile.am: Update dependencies.
        * Makefile.in: Rebuild.

Sat Feb  7 15:33:51 1998  Ian Lance Taylor  <ian@cygnus.com>

        * configure, aclocal.m4: Rebuild with new libtool.

Fri Feb  6 16:08:30 1998  Jeffrey A Law  (law@cygnus.com)

        * config/tc-mips.c (md_begin): If mips_cpu is set, then use it as
        the argument to bfd_set_arch_mach.
        (load_address): Use bfd_arch_bits_per_address to determine the
        bit size of an address instead of looking at the isa level.
        (macro, macro2, s_cprestore, s_cpadd): Likewise.

start-sanitize-v850e
Fri Feb  6 14:44:34 1998  Nick Clifton  <nickc@cygnus.com>

        * config/tc-v850.c (md_parse_option): Add -mv850any command line option.
end-sanitize-v850e
Thu Feb  5 12:39:08 1998  Ian Lance Taylor  <ian@cygnus.com>

        * ehopt.c: New file.
        * as.h (enum _relax_state): Add rs_cfa.
        (check_eh_frame, eh_frame_estimate_size_before_relax): Declare.
        (eh_frame_relax_frag, eh_frame_convert_frag): Declare.
        * read.c (emit_expr): Call check_eh_frame.
        * write.c (cvt_frag_to_fill): Handle rs_cfa.
        (relax_segment): Likewise.
        * Makefile.am: Rebuild dependencies.
        (GAS_CFILES): Add ehopt.c.
        (GENERIC_OBJS): Add ehopt.o.
        * doc/internals.texi (Frags): Document rs_cfa.

        * as.c (show_usage): Mention --traditional-format.
        (parse_args): Accept --traditional-format.
        * as.h (flag_traditional_format): Declare.
        * output-file.c (output_file_create): If flag_traditional_format,
        set BFD_TRADITIONAL_FORMAT on stdoutput.
        * doc/as.texinfo, doc/as.1: Document --traditional-format.

        * config/tc-mips.c (append_insn): Make sure that if we have a
        fixup for an unmatched %hi reloc, it does not associated with a
        variant frag.

        * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
        * doc/Makefile.in: Likewise.

Wed Feb  4 15:41:54 1998  Nick Clifton  <nickc@cygnus.com>

        * config/tc-m32r.c (check_for_side_effects): New function.
        (can_make_parallel): Add checks for instruction side effects
        clashing with the other instruction.
        (assemble_parallel_insn): Improve warning messages.  Return error
        message from non-swapped instruction order.

Wed Feb  4 20:00:26 1998  James G. Smith  <jsmith@teknema.demon.co.uk>

        * config/tc-arm.c: Rename arm_after_pass_hook() to arm_cleanup().

        * config/tc-arm.h: Replace md_after_pass_hook definition with a
        md_cleanup definition.  This moves the forced literal output to
        the end of the source pass, and avoids macro's inserting literals
        into the code immediately after the macro expansion.

Wed Feb  4 13:17:19 1998  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-sparc.h (tc_fix_adjustable) [OBJ_ELF]: A reloc against
        a gas internal symbol is adjustable.
        * config/tc-ppc.h (tc_fix_adjustable): Likewise.

        * as.h: If gcc version greater than 2.6, use `__format__' and
        `__printf__' in function attributes, rather than `format' and
        `printf'.

Mon Feb  2 18:38:18 1998  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-sparc.c: Only include elf/sparc.h if OBJ_ELF.

Mon Feb  2 18:30:34 1998  Steve Haworth  <steve@pm.cse.rmit.EDU.AU>

        Add tms320c30 support:
        * config/tc-tic30.h: New file.
        * config/tc-tic30.c: New file.
        * config/obj-coff.h: If TC_TIC30, include coff/tic30.h and define
        TARGET_FORMAT as "coff-tic30".
        * configure.in (tic30-*-*aout*, tic30-*-*coff*): New targets.
        * Makefile.am: Rebuild dependencies.
        (CPU_TYPES): Add tic30.
        (CPU_OBJ_VALID): tic30-aout is valid.
        (TARGET_CPU_CFILES): Add config/tc-tic30.c.
        (TARGET_CPU_HFILES): Add config/tc-tic30.h.
        * configure, Makefile.in: Rebuild.

Mon Feb  2 10:20:37 1998  Nick Clifton  <nickc@cygnus.com>

        * config/tc-v850.c (md_assemble): Improvements to error messages.

Mon Feb  2 12:39:05 1998  Geoff Keating  <geoffk@ozemail.com.au>

        * config/tc-ppc.c (md_apply_fix3): Change BFD_RELOC_HI16 and
        BFD_RELOC_HI16_S to store the high bits of any value.

        * config/tc-ppc.h (tc_fix_adjustable): Undo change of Fri Jun 27.
        (TC_RELOC_RTSYM_LOC_FIXUP): Don't let the
        assembler calculate relocations to any external symbol at all.
        * config/tc-ppc.c (md_apply_fix3) [OBJ_ELF]: Correct bugs
        involving generation of pc-relative relocs.
        (md_pcrel_from_section) [OBJ_ELF]: The job this code used to do
        has been moved to md_apply_fix3.

        * config/tc-ppc.c (md_apply_fix3): Fix test for too-far branch.
        (ppc_elf_suffix): Warn about 'identifier+constant@got' syntax,
        which actually means (the address of identifier's GOT entry) +
        constant, which is not particularly useful.

Fri Jan 30 11:02:35 1998  Doug Evans  <devans@canuck.cygnus.com>

        * read.h (include_dirs): Declare.
        (include_dir_count,include_dir_maxlen): Declare.
start-sanitize-sky

        * config/tc-dvp.c (md_longopts): Add -no-dma, -no-dma-pke.
        (md_parse_option): Handle them.
        (md_show_usage): Print them.
        (output_dma,output_pke): New static globals.
        (assemble_pke): Handle -no-dma-pke.
        (insert_file): Search include dir list.
        (s_enddirect): Validate length if prespecified.
        (s_endmpg): Likewise.  Handle -no-dma-pke.
        (s_endunpack): Handle -no-dma-pke.
        (md_pcrel_from_section): Add offset to delay slot for
        undefined symbols.
end-sanitize-sky

Fri Jan 30 11:47:02 1998  Ian Lance Taylor  <ian@cygnus.com>

        * configure.in: Correct check for shared opcodes library.
        * configure: Rebuild.

        * listing.c (buffer_line): If we can't open the file, set at_end.
        (listing_print): Remove unused local variable fi.

        * config/m68k-parse.y (reglistpair): Handle register list in
        either order.

        * config/vms-conf.h: Don't undef VERSION.

start-sanitize-m32rx
Thu Jan 29 13:36:29 1998  Doug Evans  <devans@canuck.cygnus.com>

        * config/tc-m32r.c (allow_m32rx): Must compile with K&R C.
        (m32rx support): only include #ifdef HAVE_CPU_M32RX.

end-sanitize-m32rx
Thu Jan 29 14:42:44 1998  Pat Rankin  <rankin@eql.caltech.edu>

        * Makefile.am (CONFIG_OBJS): New variable, containing part of old
        OBJS variable.
        (GENERIC_OBJS): New variable, with the rest of the old OBJS
        variable.
        (OBJS): Now just $(CONFIG_OBJS) and $(GENERIC_OBJS).
        ($(srcdir)/make-gas.com): Rename from make-gas.com.
        (stamp-mk.com): Replace $(OBJS) with $(GENERIC_OBJS).
        (EXTRA_DIST): Define.
        * vmsconf.sh: Handle {targ-cpu, obj-format, atof-targ} modules
        explicitly rather than via the list of object files.
        (gcc-as.opt): New file created when make-gas.com is run.
        * config-gas.com: Create {targ-cpu.h, obj-format.h, targ-env.h,
        itbl-cpu.h} to #include appropriate file rather than copying that
        file.
        * config/vms-conf.h: Synchronize with current config.in.
        * Makefile.in: Rebuild.

start-sanitize-d30v
Thu Jan 29 18:48:19 1998  Bill Moyer  <billm@cygnus.com>

        * config/tc-d30v.c (do_assemble): Added flag_explicitly_parallel.
        (parallel_ok): Relaxed parallel subinstruction dependency check.

end-sanitize-d30v
start-sanitize-m32rx
Wed Jan 28 16:27:27 1998  Nick Clifton  <nickc@cygnus.com>

        * config/tc-m32r.c (md_assemble): Fix determination of when
        instructions can be combined in parallel.

end-sanitize-m32rx
Wed Jan 28 14:35:00 1998  Bill Moyer <billm@cygnus.com>

        * as.h (flag_warn_suppress_instructionswap): added new flag.
        * tc-d10v.c (md_parse_option,md_longopts): added "--nowarnswap" 
        command line argument.
        * tc-d10v.c (write_2_short): emit "Swapping instructions"
        warning only if flag_warn_suppress_instructionswap is false.

Wed Jan 28 16:41:19 1998  J.J. van der Heijden  <J.J.vanderHeijden@student.utwente.nl>

        * configure.in (i386-*-mingw32*): New target.
        * configure: Rebuild.

Wed Jan 28 14:51:18 1998  Ian Lance Taylor  <ian@cygnus.com>

        * symbols.c (resolve_symbol_value): Don't set the segment if it
        hasn't changed, and this is OBJ_AOUT without BFD_ASSEMBLER.

        * config/obj-aout.h (S_IS_LOCAL): Correct typo--pass argument to
        S_GET_SEGMENT.

Wed Jan 28 13:54:50 1998  Pat Rankin  <rankin@eql.caltech.edu>

        as.h (unlink): Reverse 13-Feb-97 change; use of unlink vs remove
        depends upon HAVE_{UNLINK,REMOVE} values rather than host
        compiler.

Wed Jan 28 13:48:08 1998  Ian Lance Taylor  <ian@cygnus.com>

        * config/obj-coff.h (RESOLVE_SYMBOL_REDEFINITION): Define.

start-sanitize-sky
Wed Jan 28 10:00:40 1998  Doug Evans  <devans@canuck.cygnus.com>

        * configure.in: Add dvp support.
        * configure: Regenerate.
        * config/tc-dvp.[ch]: New files.

end-sanitize-sky
Wed Jan 28 09:52:00 1998  Nick Clifton  <nickc@cygnus.com>

        * config/tc-v850.c (v850_insert_operand): Display instruction when
        an error is encountered.

Tue Jan 27 13:32:01 1998  Robert Lipe  <robertl@dgii.com>

        * configure.in (i386-*-sco3.2v5*): Defaults to ELF now.
        (i386-*-sco3.2v5*coff): New target.
        (i386-*-sco3.2*): New target.
        * configure: Rebuild.

Tue Jan 27 11:06:52 1998  Nick Clifton  <nickc@cygnus.com>

        * config/tc-v850.c: Tidy error message production.

Tue Jan 27 12:24:32 1998  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-arm.c (md_apply_fix3): Add new variable newimm to hold
        validate_immediate return value in the right type for comparisons
        to FAIL.

Tue Jan 27 06:51:59 1998  Richard Henderson  <rth@cygnus.com>

        * listing.c (MAX_BYTES): Use listing variables not constants.
        (data_buffer): No longer an array, but a pointer.
        (calc_hex): sizeof(data_buffer) -> MAX_BYTES.
        (listing_listing): Allocate data_buffer.

Tue Jan 27 06:38:35 1998  Richard Henderson  <rth@cygnus.com>

        * as.c (parse_args): Add --listing-lhs-width, --listing-lhs-width2,
        --listing-rhs-width, --listing-cont-lines.
        (show_usage): Update.
        * listing.c (listing_lhs_width, listing_lhs_width_second): New vars.
        (listing_lhs_cont_lines, listing_rhs_width): New vars.
        (print_lines): Use the variables instead of the constants.
        (listing_listing): Likewise.    
        * listing.h: Declare the new vars.
        
Tue Jan 27 05:32:05 1998  Richard Henderson  <rth@cygnus.com>

        * as.c (parse_args): Add --keep-locals alias for -L.
        Add --strip-local-absolute.
        (show_usage): Update.
        * as.h (flag_strip_local_absolute): New flag.
        * symbols.c (S_IS_LOCAL): Use it.
        * config/obj-aout.h (S_IS_LOCAL): Likewise.
        * config/obj-bout.h (S_IS_LOCAL): Likewise.
        * config/obj-coff.h (S_IS_LOCAL): Likewise.

Mon Jan 26 13:07:41 1998  Nick Clifton  <nickc@cygnus.com>

        * config/tc-m32r.c: Detect if explicitly parallel instructions
        might have an io conflict and issue a warning message. 

start-sanitize-m32rx
Mon Jan 26 12:38:54 1998  Nick Clifton  <nickc@cygnus.com>

        * config/tc-m32r.c (reads_from_src_reg): Change second parameter
        to a count of the number of matches to skip.
        (can_make_parallel): Pass count of number of matches to skip to
        reads_from_src_reg().

end-sanitize-m32rx
Thu Jan 22 17:51:44 1998  Nick Clifton  <nickc@cygnus.com>

start-sanitize-m32rx
        * config/tc-m32r.c: Add support for swapping fixups of swap
        instructions. 
end-sanitize-m32rx
        * cgen.c (cgen_save_fixups, cgen_restore_fixups,
        cgen_swap_fixups): Functions to save, restore and swap the fixup
        chain with a backup copy.
        (cgen_asm_finish_insn): Returns address of constructed insn.

Wed Jan 21 16:49:10 1998  Richard Henderson  <rth@cygnus.com>

        * listing.c (file_info_struct): Remove FILE, add POS.
        (last_open_file_info, last_open_file): New; a one entry FILE* cache.
        (file_info): Don't open the file.
        (buffer_line): Check for the file in the last_open cache, updating
        as necessary.
        (print_source): Don't reference file_info->file.
        (listing_listing): Likewise.
        (listing_print): Close the file in the cache, if any.

start-sanitize-m32rx
Tue Jan 20 17:08:53 1998  Nick Clifton  <nickc@cygnus.com>

        * config/tc-m32r.c (md_assemble): Add code to swap explicitly
        parallel instructions so that they are in the correct order.
        (reads_from_src_reg, get_src_reg, can_make_parallel,
        make_parallel): New functions to support opportunistic
        parallelisation of adjacent instructions.

end-sanitize-m32rx
Fri Jan 16 14:51:48 1998  Ian Lance Taylor  <ian@cygnus.com>

        * read.c (dwarf_file_string): New file static variable.
        (emit_expr): Look for constant sequence that leads up to a file
        name in DWARF debugging output.
        (stringer): Use dwarf_file_string to decide whether to accept a
        string as a file name.

Fri Jan 16 11:30:37 1998  Richard Henderson  <rth@cygnus.com>

        * tc-m68k.c (m68k_ip): Remove absl->reglst MRI hack.
        (crack_operand): Add reg->reglst MRI hack.
        (r_seg): Put reglst symbols in reg_section.
        (m68k_frob_symbol): Frob reglst symbols into absolute_section.

Thu Jan 15 14:19:01 1998  Richard Henderson  <rth@cygnus.com>

        * tc-sh.c (get_specific): Handle SGR & DBR.

Thu Jan 15 13:46:48 1998  Richard Henderson  <rth@cygnus.com>

        * tc-h8300.c (parse_reg): Take the length of the symbol into
        account when attempting to match a register name.
        * tc-h8500.c (parse_reg): Likewise.

Wed Jan 14 17:52:33 1998  Nick Clifton  <nickc@cygnus.com>

start-sanitize-m32rx
        * config/tc-m32r.c (md_assemble): Add support for parsing parallel
        instructions.
end-sanitize-m32rx
        * cgen.c: Formatting changes to improve readability.

Wed Jan 14 15:41:41 1998  Jeffrey A Law  (law@cygnus.com)

        * config/tc-mips.c (macro): Rework division code to avoid unfilled
        delay slot.

start-sanitize-d30v
Wed Jan 14 18:04:20 1998  Michael Meissner  <meissner@cygnus.com>

        Based on a patch from Jim Wilson
        * config/tc-d30v.c (do_assemble): Remove non-ansi default case.
        (tc_gen_reloc): Handle cross section PC relative relocs
        correctly.

end-sanitize-d30v
Wed Jan 14 15:02:19 1998  Doug Evans  <devans@seba.cygnus.com>

        * config/tc-mips.c (mips_ip): Don't test pinfo flags if INSN_MACRO.

Mon Jan 12 13:04:57 1998  Doug Evans  <devans@seba.cygnus.com>

        * cgen.c: #include setjmp.h.  Clean up pass over `struct foo' usage.
        (expr_jmp_buf): New static local.
        (cgen_parse_operand): Allow use of longjmp in parsing to handle errors.
        (cgen_md_operand): New function.
        * tc-m32r.c: Clean up pass over `struct foo' usage.
        (md_estimate_size_before_relax): Use CGEN_INSN_MNEMONIC.

Tue Jan  6 15:36:02 1998  Richard Henderson  <rth@cygnus.com>

        * symbols.c (S_SET_SEGMENT): Don't set the segment for section syms.
        (S_IS_EXTERNAL, S_IS_LOCAL): Correct parenthetication.

Fri Jan  2 16:08:54 1998  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-i386.c (i386_operand): Give an error if there are
        unrecognized characters after an expression.

Wed Dec 31 12:29:47 1997  Jeffrey A Law  (law@cygnus.com)

        * config/tc-mn10200.c (md_relax_table): Correct branch ranges.

Mon Dec 22 13:06:05 1997  Joel Sherrill  <joel@oarcorp.com>

        * configure.in (i386*-go32-rtems*): Fix to be the same as
        i[3456]86-go32.
        * configure: Rebuild.

Mon Dec 22 12:54:07 1997  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-mips.c (macro): The 4650 doesn't permit M_LDC1_AB,
        M_SDC1_AB, M_L_DOB, M_L_DAB, M_S_DAB, or M_S_DOB.
        (mips_ip): Always check for FP_D, not just for instructions that
        are not part of the regular ISA.

Thu Dec 18 16:49:28 1997  Richard Henderson  <rth@cygnus.com>

        * config/tc-d10v.c (build_insn): Make `number' a long for 64-bit hosts.

Thu Dec 18 16:42:57 1997  Richard Henderson  <rth@cygnus.com>

        * config/tc-alpha.c (cpu_types): 21164pc/pca56 does not have CIX.

Wed Dec 17 21:23:07 1997  Jeffrey A Law  (law@cygnus.com)

        * expr.c (integer_constant 32bit bignum): Mask off bits outside
        the range we care about.

start-sanitize-d30v
Wed Dec 17 15:29:03 1997  Michael Meissner  <meissner@cygnus.com>

        * config/tc-d30v.c (md_shortopts): Add 'n' and 'N' options.
        (exec_type_enum): Enumeration giving all of the exec types.
        (warn_nops): New static variable to give nop warning level.
        ({cur,prev}_mul32_p): New static variable to keep track of whether
        the current/previous instruction is a 32-bit multiply.
        (Optimizing): Make static.
        (NOP{2,_LEFT,_RIGHT}): Macros for word of nops and left/right
        nops.
        (d30v_insert_operand): Delete declaration of unused function.
        (write_2_short): Make exec_type argument enum, not int.
        (parallel_ok): Ditto.
        (check_range): Delete unused variable(s).
        (build_insn): Ditto.
        (find_format): Ditto.
        (md_apply_fix3): Ditto.
        (md_show_usage): Document -n and -N.
        (md_parse_option): Parse -n and -N.
        (write_1_short): If -n, warn about adding a nop.  Use
        NOP_{LEFT,RIGHT}.
        (write_2_short): Use enumeration values instead of hard coded
        integers.  Reset exec_type for default operations.  For explicit
        parallel operations, call parallel_ok to make sure everything is
        ok.  If writing out a parallel operation, and the previous
        instruction was a 32-bit multiply, indicate current instruction
        is.
        (parallel_ok): Allow add/tx ... to be done in parallel with
        another add/tx ... assuming the gpr registers don't overlap.
        (md_assemble): Use exec type enumeration values, not hard coded
        ints.  Check for loads or 16-bit multiplies following in the next
        cycle after a 32-bit multiply.  Add nops if that is the case.
        (do_assemble): Copy prev_mul32_p to cur_mul32_p, and set
        cur_mul32_p if current instruction is a 32-bit multiply.
        (find_format): Change spacing and layout.

end-sanitize-d30v
start-sanitize-tic80
Tue Dec 16 16:55:45 1997  Fred Fish  <fnf@cygnus.com>

        * config/tc-tic80.c (tic80_relax): New static variable.
        (md_longopts): Add new OPTION_RELAX and OPTION_NO_RELAX options.
        (md_parse_option): Handle new relax options.
        (md_show_usage): Document new relax options.
        (find_opcode): Don't use short forms of PC relative branches if
        tic80_relax is set.

end-sanitize-tic80
start-sanitize-d30v
Tue Dec 16 15:26:03 1997  Michael Meissner  <meissner@cygnus.com>

        * config/tc-d30v.c (parallel_ok): Remove non-register bits from
        used/set flag fields.  Make flag vars unsigned long.  Use
        FLAG_A{0,1} for accumulators.  Allow any 2 insns to be done in
        parallel if they use the same conditional flag with reversed
        meaning.  Allow 2 add/sub insns that set the carry or overflow
        flags but do not query them to be done in parallel.  Don't allow 2
        word store operations to be done in parallel with ADDppp or
        SUBppp.  Don't allow loads to be done in parallel with 16 bit
        multiplies.

end-sanitize-d30v
Tue Dec 16 09:20:43 1997  Nick Clifton  <nickc@cygnus.com>

        * config/tc-arm.c: Prevent use of interworking support for
        non-COFF targets.

Mon Dec 15 15:20:32 1997  Nick Clifton  <nickc@cygnus.com>

        * doc/all.texi: Add M32R cpu.

        * doc/as.texinfo: Add documentation of m32r processor.

        * doc/c-m32r.texi: New file, documenting m32r specific features.  

start-sanitize-m32rx
        * config/tc-m32r.c (allow_m32rx): New function.
        (enable_m32rx): New variable.
        (md_pseudo_table): Added .m32r and .m32rx pseudo ops
        (md_show_usage): Document new --m32rx command line option.
        (md_parse_option): Implement new --m32rx command line option.
end-sanitize-m32rx

Mon Dec 15 10:32:28 1997  Jeffrey A Law  (law@cygnus.com)

        * config/tc-mips.c (mips_ip): Correctly insert 'P' operands into
        the instruction.

start-sanitize-tic80
Fri Dec 12 11:44:20 1997  Fred Fish  <fnf@cygnus.com>

        * config/tc-tic80.c (build_insn): Handle instructions that have
        long (32 bit) PC relative offsets.  Fix places that previously
        misused R_MPPCR for 15 bit offsets to use the new R_MPPCR15W type.
        (md_apply_fix): Add case to handle long PC relative offsets.

end-sanitize-tic80
Fri Dec 12 10:35:01 1997  Nick Clifton  <nickc@cygnus.com>

        * doc/c-arm.texi (ARM Options): Document support for new ARM
        processor names.

        * config/tc-arm.c (md_parse_option): Add support for new ARM
        processor names.

Thu Dec 11 17:46:50 1997  Richard Henderson  <rth@cygnus.com>

        * config/tc-m68k.c (m68k_ip): Don't overwrite opcode table data.
        (insop, m68k_ip): Make `opcode' const so it doesn't happen again.

Fri Dec  5 11:23:59 1997  Nick Clifton  <nickc@cygnus.com>

        * config/tc-v850.c (md_assemble): Fix BFD_RELOC_32 against a
        symbol + offset.

        * config/tc-v850.h (ELF_TC_SPECIAL_SECTIONS): Use
        SHT_V850_{S|T|Z}COMMON to mark special common sections.

Tue Dec  2 17:05:13 1997  Nick Clifton  <nickc@cygnus.com>

        * config/tc-v850.c: Brought up to date with the branch.

Mon Dec  1 20:24:18 1997  J"orn Rennecke <amylaar@cygnus.co.uk>

        * config/tc-sh.c (SWITCH_TABLE_CONS): Handle (fix)->fx_size == 1.
        (SWITCH_TABLE): Handle BFD_RELOC_8.
        (md_apply_fix): #ifndef BFD_ASSEMBLER code: Handle fixP->fx_size == 1.
        (coff_reloc_map): Add BFD_RELOC_8_PCREL entry.
        (sh_coff_reloc_mangle): SWITCH_TABLE case: Handle BFD_RELOC_8.

Sat Nov 22 16:19:22 1997  Richard Henderson  <rth@cygnus.com>

        * tc-alpha.c (range_signed_16, range_signed_32): Work around an
        apparent bug in gcc's long long support crossing from x86.

Sat Nov 22 14:26:09 1997  Nick Clifton  <nickc@cygnus.com>

        * config/tc-arm.c: Brought up to date with latest changes on arm
        branch. 

Sat Nov 22 15:50:09 1997  Klaus Kaempf  <kkaempf@progis.de>

        * config-gas.com: Get version info from configure.in.

        * makefile.vms: include depend.obj in OBJS.

        * config/tc-alpha.c (s_alpha_section): Remove ".lcomm" handling.

        * config/tc-alpha.c (alpha_basereg_clobbered): Remove variable and
        all corresponding code.

Thu Nov 20 15:06:08 1997  Richard Earnshaw <rearnsha@arm.com>

        * config/tc-arm.h (TARGET_FORMAT for generic a.out targets): Allow
        run-time endian selection.

Wed Nov 19 17:44:42 1997  Richard Henderson  <rth@cygnus.com>

        * tc-sh.c (parse_reg): Properly quote for fv4.

Wed Nov 19 23:46:18 1997  Ian Lance Taylor  <ian@cygnus.com>

        * symbols.c (resolve_symbol_value): Add missing breaks in case on
        symbol value operator.

start-sanitize-vr5400
Wed Nov 19 02:24:07 1997  Ken Raeburn  <raeburn@cygnus.com>

        * config/tc-mips.c (gpr_interlocks, cop_interlocks): VR5400 has
        these.

end-sanitize-vr5400
Tue Nov 18 18:45:14 1997  J"orn Rennecke  <amylaar@cygnus.co.uk>

        * config/tc-d10v.c (parallel_ok, find_opcode): 
        Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.

Sun Nov 16 10:05:07 1997  Fred Fish  <fnf@cygnus.com>

        * config/obj-coff.c (fixup_segment): Cast second arg of
        md_apply_fix3 call to type "valueT *".

Thu Nov 13 13:53:10 1997  Andrew Cagney  <cagney@b1.cygnus.com>

        * configure.in (emulations): Make FreeBSD an aout / i386bsd
        variant.
        * configure: Re-generate.
        
Thu Nov 13 11:07:14 1997  Gavin Koch  <gavin@cygnus.com>

        * config/tc-mips.c (macro_build): Use the membership field
        for INSN_MACRO's.
        (mips_ip): Same.

Thu Nov 13 02:04:55 1997  J"orn Rennecke  <amylaar@cygnus.co.uk>

        * config/tc-d10v.c (find_opcode): For OPCODE_FAKE, add check for
        first argument if it's supposed to be a register.

start-sanitize-tx49
Wed Nov 12 10:06:27 1997  Gavin Koch  <gavin@cygnus.com>

        * config/tc-mips.c (mips_4900): Added.
        (hilo_interlocks): Added mips_4900.
        (md_begin): Set default for mips_4900.
        (macro_build,mips_ip): Test for INSN_4900 if mips_4900.
        (md_longopts): Add "m4900" and "no-m4900".
        (md_parse_option): Handle above options.

end-sanitize-tx49
Tue Nov 11 19:25:05 1997  J"orn Rennecke  <amylaar@cygnus.co.uk>

        * app.c (do_scrub_chars):  If d10v, re-insert a space before
        a '#' when in state 10.

Tue Nov 11 13:33:15 1997  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-h8300.c: Include "subsegs.h".
        (tc_reloc_mangle): Handle references to symbols which are not
        being output, so that references to `.' work.

Mon Nov 10 13:43:33 1997  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-m68k.c (m68k_ip): Call add_fix when needed for '_'
        case.

        * macro.c (sub_actual): If we don't find a parameter for an &,
        just substitute &.

Fri Nov  7 21:29:32 1997  Ken Raeburn  <raeburn@cygnus.com>
start-sanitize-vr5400

        * config/tc-mips.c (mips_ip): Added cases for "e", "%", and "P"
        operand types.
        (hilo_interlocks): VR5400 has interlocks.
        (md_begin): Expect mips64vr5400, not mips64r5400.
end-sanitize-vr5400

        * config/tc-mips.c (mips_ip): In default case, call as_bad
        instead of fprintf, to get "assembler messages:" message output
        before instead of after.

Fri Nov  7 10:36:22 1997  Doug Evans  <devans@canuck.cygnus.com>

        * frags.h: Handle multiple inclusion.

Wed Nov  5 10:51:49 1997  Doug Evans  <devans@canuck.cygnus.com>

        Based on a patch from Ian.Dall@dsto.defence.gov.au.
        * as.h (struct frag, frag support): Moved from here.
        * frags.h: To here.
        (struct frag, member tc_frag_data): New member if TC_FRAG_TYPE
        is defined.
        (struct frag, member fr_cgen): Renamed from fr_targ.cgen.
        * cgen.c (cgen_asm_finish_insn): Update.
        * config/tc-m32r.c (md_estimate_size_before_relax): Update.
        * config/tc-m32r.h (TC_FRAG_INIT): Renamed from md_init_frag.
        (md_convert_frag): Ditto.
        * config/tc-ns32k.h (TC_FRAG_TYPE): Define.
        (frag_opcode_frag,frag_opcode_offset,frag_bsr): Update.
        (TC_FRAG_INIT): Update.

Tue Nov  4 16:35:57 1997  Ian Dall  <Ian.Dall@dsto.defence.gov.au>

        * write.c (print_fixup): Use TC_FIX_DATA_PRINT (if defined) to
        print out MD fields of fix.
        * frags.c (frag_var, frag_variant): Use TC_FRAG_INIT macro (if
        defined) to initialize MD fields in frag.
        * as.h (struct frag, ns32k support): Rename ns32k to fr_ns32k.
        Delete pcrel_adjust.  Add fr_opcode_fragP, fr_opcode_offset.
        * config/tc-ns32k.h: Add comments. Remove obsolete
        BFD_FAST_SECTION_FILL definition, change prototypes for
        fix_new_ns32k and fix_new_ns32k_exp to add new arguments
        opcode_frag and opcode_offset and remove pcrel_adjust.
        (TC_FIX_TYPE): add opcode_fragP and opcode_offset fields.
        (TC_FIX_DATA_PRINT): new macro to print out TC_FIX_TYPE.
        (TC_FRAG_INIT): new macro to initialize machine dependent field in
        frags.
        (frag_opcode_frag, frag_opcode_offset, frag_bsr): macros to access
        MD fields in frag structure.
        (fix_im_disp, fix_bit_fixP, fix_opcode_frag, fix_opcode_offset,
        fix_bsr): macros to access MD fields in fix structure.
        * config/tc-ns32k.c: Avoid overlength lines. Align comments.  Don't
        use struct opcode_location as these fields are now in the frag
        structure.
        (convert_iif): Call frag_more as it is needed instead
        of trying to allocate for the whole insn. Avoid call of frag_more
        with negative argument.
        (md_pcrel_adjust, md_fix_pcrel_adjust, md_apply_fix,
        md_estimate_size_before_relax, md_pcrel_from,
        tc_aout_fix_to_chars): use accessor macros to get md fields in fix
        and frag structures.
        (fix_new_ns32k, fix_new_ns32k_exp): add new arguments opcode_frag and
        opcode_offset and remove pcrel_adjust.
        (convert_iif, cons_fix_new_ns32k): call fix_new_ns32k,
        fix_new_ns32k_exp with changed arguments.

Mon Nov  3 13:30:17 1997  Gavin Koch  <gavin@cygnus.com>

        * tc-mips.c (md_begin): Reorganize setting of default values so
        that mips_cpu depends on TARGET_CPU, and mips_opts.isa depends on
        mips_cpu.
        (md_parse_option): Remove all code that sets defaults; md_begin
        handles all of this now.

Sun Nov  2 14:46:09 1997  Ian Lance Taylor  <ian@cygnus.com>

        * Makefile.am (STAGESTUFF): Change bin_PROGRAMS to
        noinst_PROGRAMS.
        (bootstrap, bootstrap2, bootstrap3): Likewise.
        * Makefile.in: Rebuild.

        * config/tc-ppc.c (ppc_fix_adjustable): Don't adjust relocs in the
        TOC section to be against the csect.

Fri Oct 31 18:19:55 1997  Ken Raeburn  <raeburn@cygnus.com>

start-sanitize-vr5400
        * config/tc-mips.c (mips_5400): New variable.
        (md_begin, md_parse_option): Handle 5400 options/names.
        (macro_build, mips_ip): Check for 5400-specific instructions.
        (md_longopts, OPTION_M5400, OPTION_NO_M5400): More command-line
        support for 5400.

end-sanitize-vr5400
        * config/tc-mips.c (validate_mips_insn): New function, checks
        match versus mask bits, and also verifies that all bits to be
        output are actually specified somewhere.
        (md_begin): Call it for 32-bit instructions, instead of doing
        match/mask check here.  In case of failure, print a message, but
        check the rest of the opcode table before exiting.

Thu Oct 30 13:46:20 1997  Nick Clifton  <nickc@cygnus.com>

        * config/tc-arm.c (md_apply_fix3): Fix thumb ADR pseudo op.  Patch
        from Tony Thompson at ARM: athompso@arm.com

start-sanitize-d30v
Thu Oct 30 11:11:26 1997  Michael Meissner  <meissner@cygnus.com>

        * config/tc-d30v.c (build_insn): Allow odd registers for ld2w and
        friends.

end-sanitize-d30v
start-sanitize-tx49
Wed Oct 29 16:22:38 1997  Gavin Koch  <gavin@cygnus.com>

        * config/tc-mips.c (hilo_interlocks): True for tx49.
        (md_begin): Add mips64tx49.
        (md_parse_option): Add 4900 cpu.
        
end-sanitize-tx49
Fri Oct 24 15:56:47 1997  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-ppc.c (md_assemble): When handling @l, always sign
        extend if the operand expects a signed value.

        * config/tc-mips.h (LOCAL_LABELS_DOLLAR): Don't define; use
        default which is to permit dollar labels.

Fri Oct 24 11:19:22 1997  Jakub Jelinek  <jj@sunsite.mff.cuni.cz>

        * config/tc-sparc.c (sparc_memory_model): New variable.
        (md_longopts): Add -TSO/-PSO/-RMO options.
        (md_parse_options): Handle them.
        (sparc_elf_final_processing): For 64 ELF, set required
        memory ordering in e_flags. Default to RMO and let the user
        override it through command line.

        * config/tc-sparc.h (elf_tc_final_processing): Add.

Wed Oct 22 17:42:12 1997  Richard Henderson  <rth@cygnus.com>

        * config/tc-sparc.c (v9a_asr_table): New variable.
        (sparc_ip): Handle v9a asr's.
        Patch from David Miller <davem@vger.rutgers.edu>.

Wed Oct 22 17:22:59 1997  Richard Henderson  <rth@cygnus.com>

        * config/tc-sparc.h (md_do_align): New macro.
        * config/tc-sparc.c (sparc_handle_align): Handle rs_align_code.
        Patch from Jakub Jelinek <jj@sunsite.mff.cuni.cz>.

Wed Oct 22 12:51:18 1997  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-sh.c (sh_small): New variable.
        (OPTION_SMALL): Define.
        (md_longopts): Add "small".
        (md_parse_option): Handle OPTION_SMALL.
        (md_show_usage): Mention -small.
        * config/tc-sh.h (sh_small): Declare.
        (SUB_SEGMENT_ALIGN): Handle sh_small.
        * config/obj-coff.h (TARGET_FORMAT): Check sh_small in TC_SH
        case.

        * config/tc-mips.c (macro): Correct handling of constant in M_LI_D
        case in little endian mode.

Tue Oct 21 10:20:11 1997  Doug Evans  <devans@canuck.cygnus.com>

        * config/tc-sparc.c (md_apply_fix3, cases ..._H44, ..._HIX22): Leave
        overflow signalling to linker.

Mon Oct 20 14:54:06 1997  Klaus K"ampf  <kkaempf@progis.de>

        * makefile.vms: Fix for dec c.

        * config-gas.com: Give explanation for dec c setup in error
        message.

        * config/tc-alpha.c (s_alpha_comm): Make .comm symbols separate
        sections on openvms/alpha.

        * config/obj-evax.c: support .weak pseudo-op

Mon Oct 20 10:13:32 1997  Doug Evans  <devans@canuck.cygnus.com>

        * config/tc-sparc.c (default_arch_size): New static local.
        (struct sparc_arch): Rename arch_size to default_arch_size.
        New member user_option_p.
        (sparc_arch_table): Always include v9, v9a.  New entry v9-64.
        (init_default_arch): Check whether default arch is valid.
        Set default_arch_size in addition to sparc_arch_size.
        (OPTION_32,OPTION_64): Define.
        (md_longopts): New entries for -32, -64.
        (md_parse_option): Handle them.
        (md_show_usage): Print them.  Ensure init_default_arch called.
        * configure.in (sparc64): Set arch to v9-64.
        * configure: Regenerated.

Sun Oct 19 13:50:50 1997  Ian Lance Taylor  <ian@cygnus.com>

        * write.c (subsegs_finish): New function, broken out of
        write_object_file.
        (write_object_file): Some code moves into subsegs_finish.
        * write.c (subsegs_finish): Declare.
        * as.c (main): Call subsegs_finish.

        * read.c (s_include): Check for error return from
        demand_copy_string.

Tue Oct 14 20:50:58 1997  Richard Henderson  <rth@cygnus.com>

        * read.c (get_line_sb): Accept any eol marker while scanning macros.

Tue Oct 14 19:12:45 1997  Richard Henderson  <rth@cygnus.com>

        * config/tc-alpha.h (DIFF_EXPR_OK): Define.
        * config/tc-i386.h (DIFF_EXPR_OK): Define.
        * config/tc-alpha.c (md_apply_fix): Notice fx_pcrel and substitute
        the correct relocation when it exists.
        * config/tc-i386.c (md_apply_fix3): Likewise.

        * config/tc-ppc.h: Correct typo in comment.
        * config/tc-v850.h: Likewise.

Fri Oct 10 16:09:35 1997  Andrew Cagney  <cagney@b1.cygnus.com>

        * config/tc-d10v.c (parallel_ok): Allow parallel instruction issue
        when second instruction is writing to first instructions inputs.
        
Mon Oct 13 15:27:17 1997  Richard Henderson  <rth@cygnus.com>

        * ecoff.c (PAGE_SIZE): Double to 8k as a hack to allow some C++
        templated programs to build with -g.

Fri Oct 10 17:48:29 1997  Nick Clifton  <nickc@cygnus.com>

        * config/tc-v850.c (md_relax_table): Add support for relaxing
        unconditional branches.  This patch is courtesy of Jim Wilson. 
        (md_convert_frag): Fix relaxing of branches.  This patch is
        courtesy of Jim Wilson.
        (md_assemble): Create different fixups for conditional and
        unconditional branches.  This patch is courtesy of Jim Wilson.
        (md_estimate_size_before_relax): Estimate size of variable part of
        fixup based on whether it is for a conditional or an unconditional
        branch.  This patch is courtesy of Jim Wilson.
        (v850_sdata, v850_tdata, v850_zdata, v850_sbss, v850_tbss,
        v850_zbss, v850_rosdata, v850_rozdata, v850_bss): Add call to
        obj_elf_section_change_hook(). 
        (v850_comm): New function.
        (md_pseudo_table): Add new pseudo ops .zcomm, .scomm and .tcomm.
        (md_begin): Add bss flag to seg_info of bss sections.

        Add support for .scommon, .tcommon and .zcommon sections.

        * config/tc-v850.h (ELF_TC_SPECIAL_SECTIONS): Add .scommon,
        .zcommon, .tbss, .call_table_data and .call_table_text.

Fri Oct 10 15:01:14 1997  Doug Evans  <dje@canuck.cygnus.com>

        * configure.in (sparc): Set DEFAULT_ARCH from correct target.
        * configure: Regenerated.

Fri Oct 10 11:22:45 1997  Martin M. Hunt  <hunt@cygnus.com>

        * config/tc-d10v.c: Fixes to make sure the AT_WORD
        expression is not confused with -1.

Fri Oct 10 11:54:50 1997  Andrew Cagney  <cagney@b1.cygnus.com>

        * config/tc-d10v.c (parallel_ok): Flag SP as modified for @-sp
        operand - OPERAND_ATMINUS.

Fri Oct 10 00:47:44 1997  Michael Meissner  <meissner@cygnus.com>

        * config/tc-d10v.c (parallel_ok): Note that auto increment and
        decrement modify the index register.

Thu Oct  9 15:17:50 1997  Ian Lance Taylor  <ian@cygnus.com>

        From Robin Kirkham <Robin.Kirkham@mlb.dmt.csiro.au>:
        * config/tc-m68k.c (archs): Add 68306, 68307, 68322, 68356, 68334,
        68336, 68341, 68349.
        * doc/c-m68k.texi (M68K-Opts): Add -m68ec000 -m68hc000 -m68hc001
        -m68306, -m68307, -m68322, -m68356, -m68ec020, -m68ec030,
        -m68ec040, -m68ec060, -m68330, -m68334, -m68336, -m68341,
        -m68349.

        * doc/Makefile.am (CPU_DOCS): Define.
        (as.info): Depend upon $(CPU_DOCS).
        * doc/Makefile.in: Rebuild.

        * configure.in: Remove AM_PROG_INSTALL; it's called by
        AM_INIT_AUTOMAKE.
        * configure: Rebuild.

Thu Oct  9 01:44:36 1997  J"orn Rennecke  <amylaar@cygnus.co.uk>

        * tc-d10v.h (TC_START_LABEL): Don't define.
        (tc_frob_label): Define.

Thu Oct  9 00:07:23 1997  J"orn Rennecke  <amylaar@cygnus.co.uk>

        * config/tc-d10v.c (write_2_short): Fix bug that wouldn't allow
        to pair a branch and link with anything but an exe instruction.

Wed Oct  8 16:28:53 1997  Richard Henderson  <rth@cygnus.com>

        * config/tc-alpha.c (load_expression): Disable the sym+const .got
        optimization to reduce the alignment surprises for gcc.

Wed Oct  8 16:11:15 1997  Doug Evans  <dje@canuck.cygnus.com>

        * config/obj-coff.h (TC_SPARC): Don't define TARGET_FORMAT.
        * config/tc-sparc.c (sparc_target_format): Handle coff here.
        (sparc_ip): Add %hix,%lox.
        (md_apply_fix3): Call as_bad_where, not as_bad.
        Add support for BFD_RELOC_SPARC_{HIX22,LOX10}.
        (tc_gen_reloc): Add support for BFD_RELOC_SPARC_{HIX22,LOX10}.

Wed Oct  8 12:33:32 1997  Richard Henderson  <rth@cygnus.com>

        * configure.in: Change alpha-*-* to alpha*-*-*; config.guess now
        recognizes alphaev5 etc.
        * configure: Rebuild.

Wed Oct  8 00:04:05 1997  Gavin Koch  <gavin@cygnus.com>

        * config/tc-mips.c (md_begin): Replace the TARGET_CPU value
        of mipsr3900 with mipstx39.

        * config/tc-mips.c (mips_ip): Don't print the 'opcode requires 
        -mipsXX message' if the insn isn't an ISA insn.

Tue Oct  7 12:48:30 1997  Doug Evans  <dje@canuck.cygnus.com>

        * config/tc-sparc.h (TARGET_FORMAT support): Moved to tc-sparc.c.
        Redefine TARGET_FORMAT to call sparc_target_format.
        * config/tc-sparc.c (in_unsigned_range): New function.
        (sparc_arch_size): Make static.
        (sparc_target_format): New function.
        (sparc_ip): Delete variable immediate_max.  Rewrite %hi/etc reloc
        handling.  Add support for %hh,%hm,%lm,%h44,%m44,%l44.
        (output_insn): Set `fx_no_overflow'.
        (md_apply_fix3): Handle BFD_RELOC_SPARC_{7,H44,M44,L44}.
        (tc_gen_reloc): Likewise.

Mon Oct  6 14:04:50 1997  Nick Clifton  <nickc@cygnus.com>

        * config/tc-v850.c (v850_section): Remove.

        * config/obj-elf.c (obj_elf_section): Enhance error message.

Fri Oct  3 15:40:38 1997  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-mips.c: Undef OBJ_COPY_SYMBOL_ATTRIBUTES before
        including obj-elf.h in OBJ_MAYBE_ELF case.
        (mips_target_format): Return NULL after abort to avoid warning.

        * ecoff.c (generate_ecoff_stab): Remove unused static function.

        * expr.c (operator): Accept ==.  From Anders Blomdell
        <anders.blomdell@control.lth.se>.

        * config/atof-ieee.c (gen_to_words): When generating a denormal
        number, handle an overflow into the smallest normalized number.

Mon Sep 29 15:24:52 1997  J"orn Rennecke <amylaar@cygnus.co.uk>

        * as.h, input-scrub.c (new_logical_line): New return value.
        * read.c (s_app_file): Don't note the same file several times
        in a row.

Thu Sep 25 13:08:02 1997  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-m68k.c (m68k_ip): Remove ` operand specifier.

Wed Sep 24 16:54:40 1997  Joel Sherrill  <joel@oarcorp.com>

        * configure.in (sh*-*-rtems*): New target, like sh-*-elf*.
        * configure: Rebuild.

Wed Sep 24 11:30:25 1997  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-m68k.c (m68k_ip): Handle q and v operand specifiers.

        * doc/c-i386.texi (i386-Float): Remove incorrect assertion that
        fn* instructions do not insert implicit fwait.  This was changed
        Jan 29, 1996.

        * config/m68k-parse.y (yylex): Permit an expression to be used for
        the scale factor.

        * Makefile.am (EXTRA_as_new_SOURCES): Set to config/m68k-parse.y,
        not m68k-parse.y.
        * Makefile.in: Rebuild.

        * aclocal.m4: Rebuild with new libtool.
        * configure: Rebuild.

Tue Sep 23 17:48:09 1997  Ian Lance Taylor  <ian@cygnus.com>

        * app.c (do_scrub_chars): Clear mri_state at end of .mri
        pseudo-op.

        * config/tc-mips.c (hilo_interlocks): Change from a static
        variable to a macro, so that it varies with the variables upon
        which it depends.
        (gpr_interlocks, cop_interlocks): Likewise.
        (md_begin): Don't initialize them.

Fri Sep 19 17:08:41 1997  Jeffrey A Law  (law@cygnus.com)

        * config/tc-mn10300.c (md_assemble): Use strcasecomp instead
        of strcmp where appropriate.

Thu Sep 18 14:11:56 1997  Nick Clifton  <nickc@cygnus.com>

        * config/tc-v850.c (md_assemble): Cope with a zero data area
        relocation with a constant offset.
        (md_assemble): Produce error message when special data area
        relocations are used on instructions which do not support them.
        (md_assemble): Reset processor mask if defined by command line
        switch. 

Thu Sep 18 11:24:01 1997  Doug Evans  <dje@canuck.cygnus.com>

        * config/tc-sparc.c: Reorganize file.
        (parse_keyword_arg): Allow numbers in reg names.
        (SPECIAL_CASE_NONE): New macro.
        (md_assemble): Use it.
        (lookup_arch,init_default_arch): New functions.
        (default_arch,default_init_p,sparc_arch_table): New static locals.
        (sparc_arch_size): New static local.
        (max_architecture): Initialize in init_default_arch.
        (md_parse_options): Call init_default_arch if necessary.
        Rewrite -xarch/-A processing.
        (md_show_usage): Print -A values from sparc_arch_table.
        (md_begin): Call init_default_arch if necessary.
        (sparc_md_end): Handle both 32 and 64 bit environments.
        * config/tc-sparc.h (TARGET_FORMAT): Likewise.
        * acconfig.h (SPARC_V9,SPARC_ARCH64): Delete.
        (DEFAULT_ARCH): Add.
        * config.in: Regenerate.
        * configure.in (sparc): Default DEFAULT_ARCH based on target cpu.
        (SPARC_V9,SPARC_ARCH64): Delete.
        * configure: Regenerate.
        * config/vms-conf.h (SPARC_V9,SPARC_ARCH64): Delete.

Wed Sep 17 16:54:20 1997  Nick Clifton  <nickc@cygnus.com>

        * config/tc-v850.c (v850_reloc_prefix): Recoded to use CHECK_ ()
        macro. 
        (handle_tdaoff, handle_zdaoff, handle_sdaoff): New functions.
start-sanitize-v850e    

        * config/tc-v850.c (md_assemble): Corrected typo.
        * config/tc-v850.c Add new sections: call_table_data and
        call_table_text.
        (v850_reloc_prefix): Add support for ctoff() relocation prefix. 
        (handle_ctoff): New Function.

        * doc/c-v850.texi (V850 Opcodes): Document call table relocations.
end-sanitize-v850e

Tue Sep 16 14:18:22 1997  Nick Clifton  <nickc@cygnus.com>

        * config/tc-v850.c (v850_reloc_prefix): Add support for a 16 bit
        displacement from the tiny data area pointer.

Mon Sep 15 21:28:09 1997  Jeffrey A Law  (law@cygnus.com)

        * config/tc-hppa.c (fix_new_hppa): Make declaration match
        definition.

Mon Sep 15 18:33:06 1997  Nick Clifton  <nickc@cygnus.com>

        * config/tc-v850.c (processor_mask): New variable.
        (set_machine, md_parse_option): Set processor_mask.
        (md_assemble): Check that instruction is available to target
        processor. 

        * config/tc-v850.h (TARGET_PROCESSOR): New constant.
start-sanitize-v850e
        (TARGET_PROCESSOR): New constant.
        (TARGET_PROCESSOR): New constant.
end-sanitize-v850e

start-sanitize-tx19
Mon Sep 15 17:26:46 1997  Gavin Koch  <gavin@cygnus.com>

        * config/tc-mips.c (mips_1900): Replace with mips_3900 and
        mips16.

end-sanitize-tx19
start-sanitize-d30v
Mon Sep 15 11:28:04 1997  Ken Raeburn  <raeburn@cygnus.com>

        Merge in work from Martin Hunt:

        * config/tc-d30v.c (build_insn): For mvfsys and mvtsys,
        CR is 0 for PSWL and PSWH.

        * config/tc-d30v.c (do_assemble): Don't accept
        illegal condition codes for cmpu instruction.

        * config/tc-d30v.c: Add support for BFD_RELOC_D30V_9_PCREL
        used in d*i instructions.

        * config/tc-d30v.c (check_size): New function.  Check
        relocations for overflows.
        (md_pcrel_from_section): Fix relocations between sections.
        (md_apply_fix3): Use new relocation types for 15 and 21
        bit relocations in the right container. Needed because
        the address of the instruction is not eight-byte aligned
        but the relocations must be.

        * config/tc-d30v.c (md_apply_fix3): Check for overflow.
        (find_format): If ".s" or ".l" are used, don't try
        to compute branch sizes.

        * config/tc-d30v.c (do_assemble): Check for ".s" or
        ".l" extensions to opcode names.
        (find_format): Generate the correct instructions when
        ".s" or ".l" are used.

        * config/tc-d30v.c (build_insn): Check for odd registers
        on instructions that require even registers.

        * config/tc-d30v.h (md_start_line_hook): Define.
        * config/tc-d30v.c (md_start_line_hook): New hook.
        Checks the beginning of each line for a ".".  If it
        finds one, assume a pseudo-op and flush any unwritten
        instructions.

        * config/tc-d30v.c (md_apply_fix3): Fix problem
        with determining when fixups were done.

        * config/tc-d30v.c (build_insn): Fix bug where the numeric
        part of a symbol (for example, "foo+8") was being written
        into the instruction.
        (md_pseudo_table): Change .word to be 32 bits and add
        .hword as 16 bits.

        * config/tc-d30v.c (parallel_ok): Check to see if first
        instruction is a jump.

        * config/tc-d30v.c (parallel_ok): Major code reorganization.

end-sanitize-d30v
Wed Sep 10 10:07:08 1997  Nick Clifton  <nickc@cygnus.com>

start-sanitize-v850e
        * config/tc-v850.c (md_assemble): Corrected spelling mistake.
end-sanitize-v850e
        * configure.in (emulations): Add v850 emulation.

Tue Sep  9 17:14:33 1997  Doug Evans  <dje@canuck.cygnus.com>

        * Makefile.am (CPU_TYPES): Add arc.
        (TARGET_CPU_CFILES): Add tc-arc.c.
        (TARGET_CPU_HFILES): Add tc-arc.h.
        (dependencies): Rebuild.
        * Makefile.in: Rebuild.
        * configure.in: Recognize arc-*-elf*.
        * configure: Regenerated.
        * config/tc-arc.[ch]: New files.

Tue Sep  9 10:19:37 1997  Nick Clifton  <nickc@cygnus.com>

        * doc/c-v850.texi (V850 Opcodes): Document hi0() reloc prefix.
        Correct description of hi() reloc prefix.

start-sanitize-v850e
        * doc/c-v850.texi (V850 Opcodes): Document new reloc prefix.
        * config/tc-v850.c (v850_reloc_prefix): Add hilo() reloc prefix.
        * config/tc-v850.c (md_assemble): Add support for BFD_RELOC_32.
end-sanitize-v850e

        * doc/c-v850.texi: Document new pseudo ops and command line
        options.

        * config/tc-v850.c (set_machine): New function.
        * config/tc-v850.c (.v850): New pseudo op.
start-sanitize-v850e
        * config/tc-v850.c (.v850e): New pseudo op.
        * config/tc-v850.c (.v850ea): New pseudo op.
end-sanitize-v850e
        

Mon Sep  8 23:08:04 1997  Ian Lance Taylor  <ian@cygnus.com>

        Support -alh and -ald for DWARF 1:
        * listing.c (struct list_info_struct): Add debugging field.
        (listing_newline): Initialize the debugging field.  If ELF, if the
        section starts with .debug or .line, set the debugging field in
        the listing structure.
        (debugging_pseudo): Add list parameter.  Change all callers.  If
        the debugging field is set, consider it to be a debugging pseudo.
        If ELF, skip blank lines between debugging lines.
        * read.c (emit_expr): If ELF, look for line numbers.
        (stringer): If ELF, look for file names.

Mon Sep  8 12:33:40 1997  Nick Clifton  <nickc@cygnus.com>

        * config/tc-v850.c (v850_insert_operand): Only test for overflow
        if there is no insert function.

        * config/tc-v850.h (TARGET_MACHINE): New constant.

        * config/tc-v850.c (v850_insert_operand): Add
        -mwarn_unsigned_overflow. 
        (md_begin): Set BFD machine number based on machine variable.
        (md_parse_option): Add -mv850, -mv850e and -mv850ea options.

Mon Sep  8 11:20:46 1997  Ian Lance Taylor  <ian@cygnus.com>

        * as.h: Don't declare alloca if it is a macro.
        * macro.c: Likewise.

start-sanitize-tx19
Sun Sep  7 16:04:53 1997  Gavin Koch  <gavin@cygnus.com>

        * config/tc-mips.c: Add tx19/r1900.

end-sanitize-tx19
Sun Sep  7 00:30:19 1997  Richard Henderson  <rth@cygnus.com>

        * config/tc-alpha.c (md_parse_option): Move m[] out to top level and
        rename to cpu_types[].
        (s_alpha_arch): New function.
        (md_pseudo_table): Add "arch".

        * config/tc-alpha.c (md_begin): Merge the two loops through the
        opcode table.
        (s_alpha_proc): Add initial SKIP_WHITESPACE.
        (s_alpha_set): Likewise.  Use get_symbol_end instead local while loop.

Sat Sep  6 19:38:12 1997  Fred Fish  <fnf@cygnus.com>

        * read.h (s_lcomm_bytes): Add prototype (for real this time).

Thu Sep  4 12:10:01 1997  Ian Lance Taylor  <ian@cygnus.com>

        * config/obj-elf.c (elf_frob_symbol): Only set BSF_OBJECT for
        symbols on Irix.

Wed Sep  3 11:21:33 1997  Nick Clifton  <nickc@cygnus.com>

        * config/tc-v850.c: Remove BFD_RELOC_V850_16_PCREL.

Tue Sep  2 18:32:30 1997  Jeffrey A Law  (law@cygnus.com)

        * config/tc-mn10200.c (md_convert_frag): PC relative instructions arex
        relative to the next instruction, not the current instruction.
        (md_assemble): Similarly.

Tue Sep  2 15:58:52 1997  Nick Clifton  <nickc@cygnus.com>

        * doc/c-v850.texi: Explanations of offsets in SDA/ZDA areas
        correcetd. 

        * config/tc-v850.c: Add support for SDA/TDA/ZDA sections.
        (v850_reloc_prefix): Duplicate code eliminated.  Add code to
        recognise special instructions.
        (md_assemble): Calculation of the size of a fixups corrected.

        * config/tc-v850.h (ELF_TC_SPECIAL_SECTIONS): Add SDA/TDA/ZDA
        sections.       

Tue Sep  2 15:40:56 1997  Andrew Cagney  <cagney@b1.cygnus.com>

        * config/tc-v850.c (md_assemble): Use opcode->name instead of
        opcode->opcode as the sentinal. Zero is a valid opcode.

Tue Aug 26 16:51:14 1997  Ian Lance Taylor  <ian@cygnus.com>

        * doc/as.texinfo (Machine Dependencies): Add v850 to menu.
        * doc/c-v850.texi: Change node name to match other chapter nodes.

Tue Aug 26 09:46:22 1997  Nick Clifton  <nickc@cygnus.com>

        * doc/c-v850.texi (V850 Opcodes): Correct name for tiny data area
        pointer. 

Tue Aug 26 12:23:25 1997  Ian Lance Taylor  <ian@cygnus.com>

        * expr.c (integer_constant): If BFD64, don't make a bignum if the
        number will fit in 64 bits.

        * config/tc-alpha.c (load_expression): Check explicitly for O_big,
        rather than calling abort.

        * as.h: Don't define alloca if __GNUC__.  Just declare it.
        * macro.c: Copy alloca handling from as.h.

        * config/tc-i386.c (i386_align_code): Correct 16 bit noops.  From
        Gabriel Paubert <paubert@iram.es>.

        * config/tc-i386.c (md_assemble): In JumpByte case, when looking
        for a WORD_PREFIX_OPCODE, change it to ADDR_PREFIX_OPCODE if this
        is jcxz or a loop instruction.

Mon Aug 25 16:04:14 1997  Nick Clifton  <nickc@cygnus.com>

        * config/tc-v850.c (pre_defined_registers): Add 'hp' as alias for
        r2.
        (md_begin): Set up machine architecture and type.

Mon Aug 25 14:25:48 1997  Ian Lance Taylor  <ian@cygnus.com>

        * symbols.c (resolve_symbol_value): Store the value back into the
        symbol expression, to handle add or subtract simplification
        correctly.  Handle O_symbol_rva.  Add default case.

        * config/tc-ppc.c (ppc_change_csect): Temporarily lower the
        chunksize while creating the new subsection.
        * as.c (chunksize): Initialize to zero.
        * subsegs.c (subseg_set_rest): Change 5000 to chunksize when
        calling obstack_begin.

Mon Aug 25 11:21:48 1997  Nick Clifton  <nickc@cygnus.com>

        * config/tc-v850.c (md_assemble): Restore input_line_pointer upon
        exit. 
        
start-sanitize-v850e
        * config/tc-v850.c (parse_register_list): Support constant
        expressions as register lists.
end-sanitize-v850e

Mon Aug 25 10:19:34 1997  Nick Clifton  <nickc@cygnus.com>

        * doc/c-v850.texi: Change the major node to v850 Machine
        Dependencies. 

Fri Aug 22 11:16:14 1997  Nick Clifton  <nickc@cygnus.com>

        * doc/as.texinfo: Add inclusion of c-v850.texi

        * doc/c-v850.texi: New file.

        * read.c (is_end_of_line): Make NUL character be considered to be
        a line terminator.

Fri Aug 22 10:45:33 1997  Nick Clifton  <nickc@cygnus.com>

        * config/tc-v850.c (parse_register_list): Add support for curly
        brace syntax.
        (cc_names): Add "e" and "ne" conditions.

Thu Aug 21 11:00:36 1997  Nick Clifton  <nickc@cygnus.com>

        * app.c (do_scrub_chars): Support a double dash as starting a
        comment that extends to end of line.

Thu Aug 21 10:54:27 1997  Nick Clifton  <nickc@cygnus.com>

        * config/tc-v850.c (v850_section, v850_bss, v850_offset): New
        functions.
        (md_pseudo_table): New pseudo ops: .bss, .offset, .section

Thu Aug 21 00:59:53 1997  Doug Evans  <dje@canuck.cygnus.com>

        * config/tc-m32r.c (md_estimate_size_before_relax): Update recorded
        insn when changing to a different instruction.

Wed Aug 20 00:45:20 1997  J"orn Rennecke <amylaar@cygnus.co.uk>

        * tc-sh.c (parse_reg, get_specific, build_Mytes): Add SH4
        floating point extensions.
        (parse_reg): parse sgr and dbr.

Tue Aug 19 17:07:34 1997  Nick Clifton  <nickc@cygnus.com>

        * config/tc-v850.c (system_register_name): Support numbers for
        system register IDs.

Tue Aug 19 08:59:12 1997  Fred Fish  <fnf@cygnus.com>

        * read.c (s_lcomm_internal): Renamed from s_lcomm, added arg to
        flag when alignment is in bytes instead of power of 2, and code to
        use that flag to convert alignment to bytes.
        (s_lcomm, s_lcomm_bytes):  New helpers that call s_lcomm_internal.
        * read.h (s_lcomm_bytes): Add prototype.
        * config/obj-coff.c (write_object_file): If ALIGNMENT_IN_S_FLAGS is
        defined, write alignment to alignment bits in section header s_flags
        rather than the s_align field.
start-sanitize-tic80
        * config/obj-coff.h (ALIGNMENT_IN_S_FLAGS): Define for TC_TIC80.
        * config/tc-tic80.c (md_pseudo_table): Use s_lcomm_bytes for bss
        pseudo, instead of s_lcomm which wants a power of two for alignment.
end-sanitize-tic80

Mon Aug 18 20:42:23 1997  Richard Henderson  <rth@cygnus.com>

        * macro.c (check_macro): use alloca instead of xmalloc to plug leak.

Mon Aug 18 20:33:06 1997  Richard Henderson  <rth@cygnus.com>

        * as.c (show_usage): Add -am.
        * input-scrub.c (input_scrub_include_sb): Don't add leading \n
        if we've already got one.
        * listing.c (struct list_info_struct): Add line_contents.
        (listing_newline): Put unused argument to work: if non-null, save it...
        (listing_listing): ... and regurgitate during listing instead of line
        from file.
        * listing.h (LISTING_MACEXP): New define.
        (LISTING_NEWLINE): Argument is NULL.
        * read.c (read_a_source_file): If expanding macros, break up input
        lines and pass them to listing_newline.
        * doc/as.texinfo: Document -ac and -am.

        * cond.c (s_ifc): Add missing demand_empty_rest_of_line.

Mon Aug 18 11:26:36 1997  Nick Clifton  <nickc@cygnus.com>

        * config/tc-v850.c (md_apply_fix3): Add support for new 16 bit PC
        relative reloc.

start-sanitize-v850e
Mon Aug 18 11:24:21 1997  Nick Clifton  <nickc@cygnus.com>

        * config/tc-v850.c: Remove support_v850e flag and command line
        option. 
        
        * configure.in (emulations): Add support for v850e target

        * configure (emulations): Add support for v850e target

Mon Aug 18 11:24:21 1997  Nick Clifton  <nickc@cygnus.com>

        * config/tc-v850.c: Remove support_v850ea flag and command line
        option. 
        
        * configure.in (emulations): Add support for v850ea target

        * configure (emulations): Add support for v850ea target
end-sanitize-v850e

Fri Aug 15 14:00:13 1997  Ian Lance Taylor  <ian@cygnus.com>

        * Makefile.am (check-DEJAGNU): Don't cd into testsuite until after
        setting EXPECT and TCL_LIBRARY.
        * Makefile.in: Rebuild.

        * as.h (enum debug_info_type): Define.
        (debug_type): Declare.
        * as.c (debug_type): New global variable.
        (show_usage): Add --gstabs.
        (parse_args): Handle --gstabs.
        * read.c (generate_asm_lineno): Remove.
        (read_a_source_file): Output stabs debugging if appropriate.
        Change checks of generate_asm_lineno to check debug_type.  Only
        generate ECOFF debugging if ECOFF_DEBUGGING is defined.
        * read.h (generate_asm_lineno): Don't declare.
        (stabs_generate_asm_lineno): Declare.
        * stabs.c (stabs_generate_asm_lineno): New function.
        * ecoff.c (add_file): Use debug_type, not generate_asm_lineno.
        Don't turn off debugging.
        (add_file): Remove old #if 0 code.
        (ecoff_new_file): Set debug_type, not generate_asm_lineno.
        (ecoff_directive_end): Don't generate stabs line symbols.
        (ecoff_generate_asm_lineno): Don't check stabs_seen.  Don't set
        generate_asm_lineno.
        (line_label_cnt): Remove.
        (ecoff_generate_asm_line_stab): Remove.
        * ecoff.h (ecoff_generate_asm_line_stab): Don't declare.
        * doc/as.texinfo, doc/as.1: Document --gstabs.

Wed Aug 13 18:58:56 1997  Nick Clifton  <nickc@cygnus.com>

start-sanitize-v850e
        * config/tc-v850.c (md_assemble, md_show_usage, md_parse_option):
        Add support for v850ea instructions.

        * config/tc-v850.c (md_assemble, md_show_usage, md_parse_option):
        Add support for v850e instructions.
end-sanitize-v850e
        
        * config/tc-v850.c (md_assemble): Fix error recovery to reload
        text of entire opcode. 

Tue Aug 12 10:27:34 1997  Richard Henderson  <rth@cygnus.com>

        * doc/internals.texi: Document rs_leb128.

Tue Aug 12 12:17:03 1997  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-m68k.c (m68k_ip): Give an error message for SIZE_BYTE
        in ABSL case, rather than calling abort.

Mon Aug 11 21:48:00 1997  Richard Henderson  <rth@cygnus.com>

        * as.h (enum _relax_state): Add rs_leb128.
        * read.c (potable): Add sleb128 and uleb128.
        (sizeof_*leb128, output_*leb128, emit_leb128_expr, s_leb128): New
        functions.
        * read.h: Update prototypes.
        * symbols.c (resolve_symbol_value): Streamline quite a bit.  Return
        the symbol value, add a second FINALIZE argument that prevents 
        changes from being comitted.  Update all callers.
        * write.c (cvt_frag_to_fill, relax_segment): Handle rs_leb128.
        * doc/as.texinfo: Document the new pseudos.

Sun Aug 10 14:51:49 1997  Ian Lance Taylor  <ian@cygnus.com>

        * Makefile.am (MOSTLYCLEANFILES): Add site.bak, site.exp, stage,
        stage1, and stage2.
        (DISTCLEANFILES): Define.
        * doc/Makefile.am (DISTCLEANFILES): Define.
        * Makefile.in, doc/Makefile.in: Rebuild.

Wed Aug  6 00:30:30 1997  Ian Lance Taylor  <ian@cygnus.com>

        * configure.in: Define TARGET_BYTES_BIG_ENDIAN if endian is set.
        Don't set targ or gas_target.  Define SCO_ELF and
        TARGET_SOLARIS_COMMENT when appropriate.  Don't substitute for
        target_frag.
        * Makefile.am: Remove @target_frag@.
        (INCLUDES): Remove $(INTERNAL_CFLAGS), $(CROSS), $(HDEFINES), and
        $(TDEFINES).
        (dep-am): Mark as phony.
        * acconfig.h: Add TARGET_BYTES_BIG_ENDIAN, TARGET_SOLARIS_COMMENT,
        and SCO_ELF.
        * config/arm-big.mt, config/arm-lit.mt: Remove.
        * config/mips-big.mt, config/mips-lit.mt: Remove.
        * config/ppc-big.mt, config/ppc-lit.mt: Remove.
        * config/ppc-sol.mt: Remove.
        * config/i386coff.mt, config/m68kcoff.mt: Remove.
        * config/m88kcoff.mt: Remove.
        * config/sco5.mt: Remove.
        * configure, config.in, Makefile.in: Rebuild.

        * Makefile.am ($(srcdir)/config/m68k-parse.h): New target, to
        further try to circumvent the .y.h rule.
        * Makefile.in: Rebuild.

Tue Aug  5 12:32:07 1997  Ian Lance Taylor  <ian@cygnus.com>

        * Makefile.am: New file, based on old Makefile.in.
        * acinclude.m4: New file, from old aclocal.m4.
        * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.  Remove
        shared library handling; now handled by libtool.  Replace
        AC_CONFIG_HEADER with AM_CONFIG_HEADER.  Call AC_PROG_YACC,
        AC_PROG_LEX, and AC_DECL_YYTEXT.  Call AM_MAINTAINER_MODE,
        AM_CYGWIN32, and AM_EXEEXT.  Don't call CY_CYGWIN32 or CY_EXEEXT.
        * config.in: New file, created by autoheader.
        * conf.in: Remove.
        * acconfig.h: Mention PACKAGE, VERSION, and USING_CGEN.
        * stamp-h.in: New file.
        * as.c (print_version_id): Change GAS_VERSION to VERSION.
        (parse_args): Likewise.
        * config/obj-vms.c: (Write_VMS_MHD_Records): Likewise.
        * doc/Makefile.am: New file, based on old doc/Makefile.in.
        * Makefile.in, doc/Makefile.in: Now built with automake.
        * aclocal.m4: Now built with aclocal.
        * configure: Rebuild.

        * cond.c (s_else): If not listing false conditionals, turn listing
        off in the false branch of the else.

Mon Aug  4 11:28:35 1997  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-mips.c (macro): Fix handling of a double load from a
        symbol plus an offset.

        * ecoff.c (ecoff_build_symbols): Set fMerge to 0 for an FDR which
        has an associated external symbol.

Sun Aug  3 23:23:59 1997  Richard Henderson  <rth@cygnus.com>
 
        * config/tc-alpha.c (s_alpha_ucons): New function.
        (md_pseudo_table): Add unaligned data pseudos for DWARF.

Thu Jul 31 15:13:43 1997  Jeffrey A Law  (law@cygnus.com)

        * config/tc-v850.c (md_assemble): Ignore the rest of the current
        line if we encounter an error.

        * config/tc-v850.c (md_assemble): Sign extend constants value
        for hi and hi0 expressions.
        (v850_insert_operand): Enable range checking for generic 16bit
        operands.

Tue Jul 29 14:20:43 1997  Jeffrey A Law  (law@cygnus.com)

        * config/tc-v850.c (md_assemble): Turn on fx_no_overflow for
        LO16, HI16 and HI16_S relocs.

Mon Jul 28 18:41:41 1997  Rob Savoye  <rob@chinadoll.cygnus.com>

        * configure.in: Use CYGWIN and EXEEXT autoconf macro to look for
        win32 dependencies.
        * configure: Regenerated with autoconf 2.12.
        * Makefile.in: Add $(EXEEXT) to all executables.

Fri Jul 25 10:54:43 1997  Jeffrey A Law  (law@cygnus.com)

        * tc-hppa.c (md_apply_fix): Improve warnings for out of range
        unconditional branches.
        (hppa_fix_adjustable): Don't adjust anything with a RR% or LR%
        field selector.

Thu Jul 24 15:21:49 1997  Doug Evans  <dje@canuck.cygnus.com>

        * tc-sparc.c (md_begin): Cast sparc_opcodes to PTR for hash_insert.

Thu Jul 24 17:51:29 1997  Ian Lance Taylor  <ian@cygnus.com>

        * macro.c (define_macro): Make sure the index is in range before
        checking for '('.

start-sanitize-tic80
Thu Jul 24 12:13:19 1997  Fred Fish  <fnf@cygnus.com>

        * config/tc-tic80.c (build_insn): Remove "extended" and replace with
        "fx" and "fxfrag".  Add "ffrag".  Change code to initialize and use
        the right f/ffrag and fx/fxfrag pairs since instruction may be split
        across frags.

end-sanitize-tic80
Tue Jul 22 18:38:56 1997  Robert Hoehne <robert.hoehne@Mathematik.TU-Chemnitz.DE>

        * config/te-go32.h (USE_ALIGN_PTWO): Define.
        * config/tc-i386.c (md_pseudo_table): If USE_ALIGN_PTWO is
        defined, use s_align_ptwo for .align.
        * configure.in (i386-*-msdosdjgpp*): New target.
        (i386-*-go32*): Set em to go32 and targ to coffgo32.
        * configure: Rebuild.

Tue Jul 22 12:41:40 1997  Doug Evans  <dje@canuck.cygnus.com>

        * config/tc-sparc.c (last_opcode): New static local.
        (md_assemble): Don't issue "FP branch in delay slot" warning if
        the delay slot has been annulled.

Tue Jul 22 13:25:13 1997  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-m68k.c (md_apply_fix_2): Check for PC relative reloc
        code if BFD_ASSEMBLER.

Mon Jul 21 08:57:17 1997  Jeffrey A Law  (law@cygnus.com)

        * config/tc-v850.c (system_registers): Fix ordering of registers.

start-sanitize-tic80
Tue Jul 15 16:29:54 1997  Fred Fish  <fnf@cygnus.com>

        * config/tc-tic80.c (build_insn): Initialize extended word to zero
        when it will be filled in later by relocation information.

end-sanitize-tic80
Mon Jul 14 23:10:58 1997  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-mips.c (macro_build): Restore check of fmt argument.
        (mips_ip): Fix ISA checks.

start-sanitize-r5900
Tue Jul 15 10:15:39 1997  Jeffrey A Law  (law@cygnus.com)

        * configure.in: Default the r5900 to little endian.
        * configure: Rebuilt.

end-sanitize-r5900
start-sanitize-tic80
Mon Jul 14 19:30:55 1997  Fred Fish  <fnf@cygnus.com>

        * config/tc-tic80.c (build_insn): Fix endianness problem with
        O_big operands.

end-sanitize-tic80
Sun Jul 13 20:43:46 1997  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-mips.c (check_absolute_expr): Change warning to
        error.

Fri Jul 11 10:18:47 1997  Jeffrey A Law  (law@cygnus.com)

        * config/tc-mips.c (macro_build): Refine code to check if an
        instruction is available on a particular cpu variant.
        (mips_ip): Likewise.

Mon Jul  7 22:53:08 1997  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-i386.c (tc_i386_fix_adjustable): Change ifndef
        OBJ_AOUT to ifdef OBJ_ELF.
        (md_apply_fix3): When mangling 32 bit PC relative reloc for
        BFD_ASSEMBLER, handle one ELF case for COFF as well, and add a PE
        case.
        * write.c (fixup_segment): Change special case for i386-coff to
        not apply for i386-pe.
        * config/obj-coff.c (coff_adjust_section_syms): Only count fixups
        which were not done.
        (coff_frob_file_after_relocs): Rename from coff_frob_file.
        (coff_format_ops): Initialize frob_file_after_relocs field rather
        than frob_file field.
        * config/obj-coff.h (coff_frob_file): Don't declare.
        (coff_frob_file_after_relocs): Declare.
        (obj_frob_file): Don't define.
        (obj_frob_file_after_relocs): Define.
        * configure.in: Set bfd_gas to yes for i386-*-cygwin32.
        * configure: Rebuild.

Wed Jul  2 12:05:00 1997  Ian Lance Taylor  <ian@cygnus.com>

        * config/obj-coff.c (fixup_segment): Never subtract section
        address from PC relative reloc which will be fully resolved.

Tue Jul  1 15:23:07 1997  Jeffrey A Law  (law@cygnus.com)

        * ecoff.c (page_type): Renamed from page_t to avoid conflict
        with hpux10 header files.

Mon Jun 30 12:27:28 1997  Ian Lance Taylor  <ian@cygnus.com>

        From Jason Merrill <jason@cygnus.com>:
        * read.c (do_align): If BFD_ASSEMBLER, only use NOP_OPCODE if
        SEC_CODE is set.
        * config/tc-i386.h (md_maybe_text): Define.
        (md_do_align): Use md_maybe_text.

Fri Jun 27 19:15:27 1997  Michael Meissner  <meissner@cygnus.com>

        * config/tc-ppc.h (tc_fix_adjustable): Only check for GOT type
        relocations, don't check for symbol being external, weak, etc.

Mon Jun 16 19:12:51 1997  Geoff Keating  <geoffk@ozemail.com.au>

        * config/tc-ppc.h (tc_fix_adjustable): Don't let the assembler
        calculate relocations to any external symbol, because we might be
        linking a shared object and the symbol might be overriden or moved
        (for instance, moved into a static executable's .bss section).
        (GLOBAL_OFFSET_TABLE_NAME): Delete. This is an i386 wierdness.

        * config/tc-ppc.h (tc_fix_adjustable): GOT-based relocations can't
        be calculated by the assembler.

        * config/tc-ppc.c (md_apply_fix3): Handle @plt or @local branch
        whose destination lies in the same file, by ignoring the @plt or
        @local and aiming the branch at its destination.

Mon Jun 16 13:59:18 1997  H.J. Lu  <hjl@gnu.ai.mit.edu>

        * symbols.c (copy_symbol_attributes): Copy BSF_OBJECT flag.
        * config/obj-elf.h (OBJ_COPY_SYMBOL_ATTRIBUTES): Copy size
        expression.

        * config/obj-multi.h (OBJ_COPY_SYMBOL_ATTRIBUTES): Define instead
        of obj_copy_symbol_attributes.

Mon Jun 16 12:45:56 1997  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-ppc.c (ppc_insert_operand): In 32 bit mode, with a
        signed operand, sign extend a 32 bit value to the host size.

        * Makefile.in (CFLAGS): Subsitute from configure script.  From
        Jeff Makey <jeff@cts.com>.

        * config/tc-i386.c (i386_operand): Use alloca rather than a fixed
        buffer size to make a copy of the symbol.

        * Makefile.in (OBJS): Put @extra_objects@ on the same line as
        macro.o.

Thu Jun 12 12:16:20 1997  Ian Lance Taylor  <ian@cygnus.com>

        * write.c (write_object_file): In non BFD_ASSEMBLER code, as we
        step through the frags calling cvt_frag_to_fill, switch to
        SEG_DATA when we reach data_frag_root.

Tue Jun 10 17:08:34 1997  Jeffrey A Law  (law@cygnus.com)

        * config/tc-mn10300.c (md_assemble): Allow an empty register
        list for instructions which use register lists.

Tue Jun 10 11:18:09 1997  H.J. Lu  <hjl@gnu.ai.mit.edu>

        * config/tc-arm.c (md_apply_fix3): Make temp unsigned long.

        * config/tc-arm.c (arm_adjust_symtab): Only set storage classes if
        OBJ_COFF.

        * config/tc-arm.c: Add prototypes for many static functions.
        (struct asm_opcode ): Add prototypes for parms field.
        (struct thumb_opcode ): Likewise.
        (fp_op2): Remove unused flags parameter.
        (output_inst): Make static.
        (arm_after_pass_hook): Remove unused ignore parameter.
        * config/tc-arm.h (arm_after_pass_hook): Declare.
        (arm_start_line_hook): Declare.
        (arm_frob_label): Declare.

Mon Jun  9 12:55:45 1997  H.J. Lu  <hjl@gnu.ai.mit.edu>

        * depend.c (wrap_output): new prototype.

Mon Jun  9 12:52:44 1997  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-sh.c (md_apply_fix): Check for overflow.

        * config/tc-m68k.c (md_section_align): If a.out and BFD, force
        section size to be aligned.

Fri Jun  6 17:15:55 1997  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-sh.h (md_cons_align): Define.
        (sh_cons_align): Declare.
        * config/tc-sh.c (md_pseudo_table): Add .uaword and .ualong.
        (sh_no_align_cons): New static variable.
        (s_uacons): New static function.
        (sh_cons_align): New function.
        (sh_handle_align): Warn about misaligned data.
        * doc/c-sh.texi: Document .uaword and .ualong.

Thu Jun  5 15:38:17 1997  Ian Lance Taylor  <ian@cygnus.com>

        * macro.c (macro_expand): In MRI mode, treat single quote as a
        separator character when checking for a positional argument.

Tue Jun  3 16:15:13 1997  Nick Clifton  <nickc@cygnus.com>

        * config/tc-arm.c (md_parse_option): Merge in changes from
        armT-970328-branch.

        * config/tc-arm.h: Merge in changes from armT-970328-branch.

        * configure.in (emulations): Add Thumb architecture support from
        armT-9703-28-branch.

Mon Jun  2 16:25:07 1997  Nick Clifton  <nickc@cygnus.com>

        * doc/all.texi: Add enabling of ARM documentation.

        * doc/as.texinfo: Add ARM documentation from armT-970328-branch.

Mon Jun  2 11:55:12 1997  Gavin Koch  <gavin@cygnus.com>

        * config/tc-mips.c: Added r3900 support.

Thu May 29 12:58:26 1997  Ben Pfaff  <pfaffben@pilot.msu.edu>

        * as.c: (parse_args) `-t' option requires an argument.

Wed May 28 15:45:07 1997  Nick Clifton  <nickc@cygnus.com>

        * config/tc-arm.c (md_begin): Change call to
        coff_arm_bfd_set_private_flags() to a call to
        bfd_set_private_flags(). 

Wed May 28 16:17:34 1997  Ian Lance Taylor  <ian@cygnus.com>

        * Makefile.in: Rebuild dependencies.

        * config/tc-i386.c (tc_gen_reloc): Don't try to convert the type
        of a BFD_RELOC_RVA reloc.

Wed May 28 10:48:14 1997  Jeffrey A Law  (law@cygnus.com)

        * config/tc-hppa.c (tc_fix_adjustable): Reject absolute calls/jumps.
        (hppa_force_relocation): Force a relocation for an absolute
        call/jump.

Mon May 26 13:24:25 1997  Ian Lance Taylor  <ian@cygnus.com>

        * doc/as.texinfo: Don't use @value in section names or index
        entries; it confuses texinfo.tex.

Fri May 23 00:09:35 1997  Tom Tromey  <tromey@cygnus.com>

        * doc/as.texinfo: Updated for -MD option.
        * Makefile.in (CFILES): Added depend.c.
        (OBJS): Added depend.o.
        * as.h (start_dependencies, register_dependency,
        print_dependencies): New declarations.
        * depend.c: New file.
        * as.c (parse_args): Added -MD option.
        (main): Call print_dependencies.
        (show_usage): Added help for -MD.
        * read.c (s_app_file): Call register_dependency.
        (s_include): Call register_dependency when file is found.
        (read_a_source_file): Call register_dependency.

Wed May 21 17:39:28 1997  Ian Lance Taylor  <ian@cygnus.com>

        * config/obj-coff.c (symbol_to_chars): If TE_PE, don't add the
        section address to the symbol value.

Tue May 20 11:23:31 1997  Gavin Koch  <gavin@cygnus.com>

        * config/tc-mips.c (macro_build,mips_ip): Move the INSN_ISA field
        into the new membership field.

Thu May 15 10:00:53 1997  Nick Clifton  <nickc@cygnus.com>

        * config/tc-arm.c (md_begin): If no cpu type is specified on the
        command line then the ARM7 is now chosen by default when setting
        the BFD machine and architecture.

Wed May 14 09:54:53 1997  Nick Clifton  <nickc@cygnus.com>

        * config/tc-arm.c (global variables): Added 'uses_apcs_26' flag to
        hold APCS selection.
        (md_begin): Added code to generate flags to be set into the COFF
        header and the calls to the BFD functions to do this.
        (md_parse_option, md_show_usage): Added new command line
        options -mapcs-32, -mapcs-26, -marmv2, -marmv2a, -marmv3,
        -marmv3m, -marmv4, -marmv4t. 

        * tc-arm.h (LOCAL_LABEL): Removed the definition of this macro
        as it is never used.

Tue May 13 22:26:14 1997  Jeffrey A Law  (law@cygnus.com)

        * config/tc-mn10200.c (md_convert_frag): Prefix temporary
        label name with ".".
        * config/tc-mn10300.c (md_convert_frag): Likewise.

Tue May 13 14:44:39 1997  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-mips.c (set_at): Check for bignum.
        (check_absolute_expr, macro, mips16_macro): Likewise.

start-sanitize-tic80
Tue May 13 10:45:56 1997  Fred Fish  <fnf@cygnus.com>

        * config/tc-tic80.c (md_apply_fix): Check PC relative relocations
        for overflow/underflow, only insert lower 15 bits into instruction.

end-sanitize-tic80
Mon May 12 13:33:08 1997  H.J. Lu  <hjl@gnu.ai.mit.edu>

        * config/tc-i386.c (pi): Check for RegMMX.

Thu May  8 11:10:15 1997  Ian Lance Taylor  <ian@cygnus.com>

        * expr.c (expr): When subtracting values in the same frag,
        subtract X_add_number rather than adding it.

Wed May  7 15:39:48 1997  Ian Lance Taylor  <ian@cygnus.com>

        * config/obj-coff.c (write_object_file): Just pass NULL to
        md_do_align, not the address of a char holding NOP_OPCODE.

        * config/tc-mips.c (macro): Handle constants for M_LI_D and
        M_LI_DD.
        (mips_ip): For 'F', 'L', 'f', and 'l', generate a constant rather
        than an address if the floating point value looks sufficiently
        simple.

Tue May  6 12:18:09 1997  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-i386.c (md_section_align): If a.out and BFD, force
        section size to be aligned.

Mon May  5 17:16:55 1997  Ian Lance Taylor  <ian@cygnus.com>

        * cond.c: Include "macro.h".
        (struct conditional_frame): Add macro_nest field.
        (initialize_cframe): Initialize macro_nest.
        (cond_finish_check): Add nest parameter.  Change all callers.
        (cond_exit_macro): New function.
        * as.h (cond_finish_check): Update declaration.
        (cond_exit_macro): Declare.
        * input-scrub.c (macro_nest): Make globally visible.
        (input_scrub_next_buffer): Call cond_finish_check.
        * macro.h (macro_nest): Declare.
        * read.c (s_mexit): Call cond_exit_macro.

        * config/tc-i386.h (RegMMX): Define.
        * config/tc-i386.c (pi): Check for all register types.
        (type_names): Add RegMMX.
        (md_assemble): Handle RegMMX.

Wed Apr 30 12:47:00 1997  Manfred Hollstein  <manfred@s-direktnet.de>

        * config/obj-coff.c (c_section_symbol): Clear the LOCAL bit #ifdef
        TE_DELTA.

Tue Apr 29 20:23:10 1997  Jim Wilson  <wilson@cygnus.com>

        * config/tc-mips.c (nopic_need_relax): Add new parameter
        before_relaxing.  Use it when testing ecoff_extern_size.
        (load_address, macro, md_estimate_size_before_relax): Fix all
        callers.

Tue Apr 29 19:54:36 1997  Richard Henderson  <rth@tamu.edu>

        * config/obj-elf.c (elf_pseudo_table): Add "subsection".
        (obj_elf_subsection): New static function.

Tue Apr 29 19:52:47 1997  Ian Lance Taylor  <ian@cygnus.com>

        * config/obj-coff.c (coff_header_append): Don't reset string_size
        each time through the loop.

Fri Apr 25 14:17:46 1997  H.J. Lu  <hjl@gnu.ai.mit.edu>

        * Makefile.in (DISTSTUFF): Add itbl-parse.h.

Fri Apr 25 12:03:15 1997  Ian Lance Taylor  <ian@cygnus.com>

        * doc/internals.texi (Porting GAS): Correct documentation for
        current configure handling of targ-cpu.h, et. al.
        (CPU backend): Document listing macros.

        * listing.c (data_buffer): Set size based on other listing macros,
        rather than always using 100.
        (data_buffer_size): Remove static variable.
        (calc_hex): Make data_buffer_size a local variable.  Don't leave
        any slop when filling data_buffer.

Mon Apr 21 15:33:19 1997  Ian Lance Taylor  <ian@cygnus.com>

        * doc/c-mips.texi: Document .set autoextend.

Sat Apr 19 23:09:25 1997  Niklas Hallqvist  <niklas@petra.appli.se>

        * configure.in (i386-*-openbsd*, m68k-*-openbsd*,
        mips-dec-openbsd*, ppc-*-*bsd*, ns32k-pc532-openbsd*,
        sparc-*-openbsd*): New targets.
        * configure: Rebuild.

Sat Apr 19 22:52:03 1997  Jim Wilson  <wilson@cygnus.com>

        * config/obj-elf.c (elf_frob_symbol): If TC_MIPS, set BSF_OBJECT
        for all undefined symbols.

Fri Apr 18 13:37:35 1997  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-ppc.c (ppc_fix_adjustable): Handle zero length csects
        correctly.

Fri Apr 18 11:51:35 1997  Niklas Hallqvist  <niklas@appli.se>

        * configure.in (alpha*-*-openbsd*): New target.
        * configure: Rebuild.

Thu Apr 17 13:59:47 1997  Per Fogelstrom  <pefo@openbsd.org>

        * configure.in (mips-*-openbsd*): New target.
        * configure: Rebuild.

start-sanitize-d30v
Wed Apr 16 12:31:24 1997  Martin Hunt <hunt@cygnus.com>

        * config/tc-d30v.c (parallel_ok): Fix parallel checking
        for instructions using conditional execution.

end-sanitize-d30v       
Tue Apr 15 18:11:44 1997  Gavin Koch  <gavin@cygnus.com>

        * config/tc-mips.c (insn_uses_reg): Correct test for fpr pairs.

Tue Apr 15 13:04:47 1997  Ian Lance Taylor  <ian@cygnus.com>

        * Makefile.in (srcroot): Remove.
        (INSTALL): Set to @INSTALL@.
        (INSTALL_XFORM, INSTALL_XFORM1): Remove.
        (all, dvi): Don't set srcroot.
        (install): Depend upon as.new, gasp.new, and installdirs.  Use
        $(program_transform_name) directly, rather than using
        $(INSTALL_XFORM) and $(INSTALL_XFORM1).
        (installdirs): New target.
        * doc/Makefile.in (INSTALL_XFORM1): Remove.
        (install): Depend upon installdirs.  Use $(program_transform_name)
        directly, rather than using $(INSTALL_XFORM) and
        $(INSTALL_XFORM1).
        (installdirs): New target.
        (install-info-as): Run mkinstalldirs.
        (install-info-gasp): Likewise.

Mon Apr 14 11:59:08 1997  Ian Lance Taylor  <ian@cygnus.com>

        * Makefile.in (INSTALL): Change install.sh to install-sh.

        * symbols.c (resolve_symbol_value): Check for division by zero.

        From Thomas Graichen <graichen@rzpd.de>:
        * Makefile.in: Always use $(SHELL) when running move-if-change.
        * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
        * configure: Rebuild.

Thu Apr 10 14:40:00 1997  Doug Evans  <dje@canuck.cygnus.com>

        * cgen.c (cgen_parse_operand): Renamed from cgen_asm_parse_operand.
        New argument `want'.  Update enum cgen_parse_operand_result values.
        Initialize if CGEN_PARSE_OPERAND_INIT.
        * config/tc-m32r.c (md_begin): Set cgen_parse_operand_fn.
        (md_assemble): Call cgen_asm_init_parse.
        Update call to m32r_cgen_assemble_insn, call as_bad if assembly failed.

Wed Apr  9 11:49:41 1997  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-m68k.c (m68k_ip): Handle #j.

Tue Apr  8 16:37:57 1997  Jeffrey A Law  (law@cygnus.com)

        * config/tc-mn10300.c (md_convert_frag): Create fixup at the
        right address for call label:32,regs,imm.

Mon Apr  7 14:58:22 1997  Jeffrey A Law  (law@cygnus.com)

        * config/tc-hppa.c (pa_subspace_start): If OBJ_ELF, then always return
        zero.
        * config/tc-hppa.h (tc_frob_symbol): Don't reset the value of the
        symbol for OBJ_ELF anymore.

Mon Apr  7 10:54:59 1997  Doug Evans  <dje@canuck.cygnus.com>

        * Makefile.in: Regenerate dependencies.
        (TARG_CPU): New variable.
        (cgen.o): Depend on cgen.h, $(TARG_CPU)-opc.h.
        (.dep1): Delete creating of cgen-opc.h.
        (.tcdep): Put proper contents in cgen-opc.h.
        * configure.in (m32r): Delete setting of extra_files, extra_links.
        (AC_OUTPUT): Create cgen-opc.h.
        * configure: Regenerated.

Sat Apr  5 13:19:12 1997  Klaus Kaempf  <kkaempf@progis.de>

        * makefile.vms: Update to build gasp.exe.

Fri Apr  4 16:10:02 1997  Doug Evans  <dje@canuck.cygnus.com>

        * write.c (relax_frag): Make non-static.
        * write.h (relax_frag): Add prototype for.
        * config/tc-m32r.h (md_do_align): New arg `max'.
        * config/tc-m32r.c (m32r_do_align): Likewise.
        Update calls to frag_align, frag_align_pattern.
        (fill_insn): Update call to m32r_do_align.
        (m32r_scomm): Update call to frag_align.

        * config/tc-m32r.[ch]: New files.
        * cgen.c: New file.
        * Makefile.in (CPU_TYPES): Add m32r.
        (TARGET_CPU_CFILES): Add tc-m32r.c.
        (TARGET_CPU_HFILES): Add tc-m32r.h.
        (DISTCLEAN_HERE): Add cgen-opc.h.
        (.dep1,.tcdep): Create empty cgen-opc.h.
        (cgen.o): Add dependencies.
        (dependencies): Regenerate.
        * as.h (struct frag): New member fr_targ.
        (fr_pcrel_adjust,fr_bsr): Move into union fr_targ.ns32k.
        * conf.in (USING_CGEN): New macro.
        * configure.in (m32r-*-*): Add entry for.
        Add cgen.o to extra_objects.
        * configure: Regenerate.
        * frags.c (frag_var): fr_pcrel_adjust renamed to
        fr_targ.ns32k.pcrel_adjust.  fr_bsr renamed to fr_targ.ns32k.bsr.
        (frag_variant): Likewise.
        * write.c (relax_frag): Likewise.
        * config/tc-ns32k.c (*): Likewise.

Fri Apr  4 13:26:10 1997  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-hppa.h (TC_EOL_IN_INSN): Check explicitly for '!',
        rather than for any end of line character.

        * config/tc-hppa.c (tc_gen_reloc): If hppa_ren_reloc_type fails,
        call abort (i.e., as_abort) rather than crashing.

        * config/tc-mips.c: Protect uses of STO_MIPS16 with an ifdef of
        OBJ_ELF, rather than of S_GET_OTHER.

        * Makefile.in (DISTCLEAN_HERE): Add site.exp and site.bak.

Thu Apr  3 13:16:18 1997  Ian Lance Taylor  <ian@cygnus.com>

        * Makefile.in (VERSION): Set to 2.8.1.

        * Branched binutils 2.8.

Wed Apr  2 12:24:10 1997  Ian Lance Taylor  <ian@cygnus.com>

        * COPYING: Update FSF address.

        * config/tc-mips.c (mips16_macro): Handle M_DMUL and M_MUL.

Tue Apr  1 18:29:47 1997  Jim Wilson  <wilson@cygnus.com>

        * config/tc-mips.c (md_begin): Don't set interlocks for 4100.

Tue Apr  1 16:24:28 1997  Klaus Kaempf  <kkaempf@progis.de>

        * config-gas.com: Update to handle both vax and alpha.
        * makefile.vms: Update to use config-gas.
        * conf-a-gas.com: Remove file.

Tue Apr  1 16:08:21 1997  Ian Lance Taylor  <ian@cygnus.com>

        * Makefile.in: Remove unnecessary itbl-parse.h, ibtl-parse.c, and
        itbl-lex.c dependencies.  Remove rules for itbl-lex.o,
        itbl-parse.o, and itbl-ops.o; just use the normal .c.o rule.

start-sanitize-tic80
Tue Apr  1 11:25:56 1997  Michael Meissner  <meissner@cygnus.com>

        * config/tc-tic80.c (line_comment_char): Make '#' start comments
        at the beginning of a line for compatibility with .S files where
        cpp leaves the filename transitions beginning with '#'.

end-sanitize-tic80
Tue Apr  1 00:07:30 1997  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-m68k.c: Only compile tc_coff_symbol_emit_hook and
        tc_coff_sizemachdep if OBJ_COFF.

Mon Mar 31 23:53:44 1997  H.J. Lu  <hjl@gnu.ai.mit.edu>

        * config/tc-ppc.c (register_name): Declare.

Mon Mar 31 16:31:04 1997  Joel Sherrill  <joel@oarcorp.com>

        * configure.in (hppa*-*-rtems*): New target, like hppa-*-*elf*.
        * configure: Rebuild.

Mon Mar 31 14:15:19 1997  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-mips.c (mips_pseudo_table): Add "stabn".
        (mips16_mark_labels): New static function.
        (append_insn): Call mips16_mark_labels.
        (mips_emit_delays): Likewise.
        (s_insn): Likewise.  Don't call mips_clear_insn_labels.
        (s_mips_stab): New static function.

        * configure.in: Use ELF for mips-*-gnu*.
        * configure: Rebuild.

Mon Mar 31 14:01:40 1997  Philippe De Muyter  <phdm@info.ucl.ac.be>

        * config/tc-m68k.h (TARGET_FORMAT): Set to "coff-m68k-sysv" if
        TE_DELTA.

Fri Mar 28 18:03:19 1997  Alan Modra  <alan@spri.levels.unisa.edu.au>

        * configure.in: Add AC_ARG_ENABLE for commonbfdlib.  If it is set,
        set OPCODES_LIB to empty.
        * configure: Rebuild.

Fri Mar 28 15:25:24 1997  H.J. Lu  <hjl@gnu.ai.mit.edu>

        * configure.in (sparc-*-linux*aout*, sparc-*-linux*): New
        targets.
        * configure: Rebuild.

Fri Mar 28 13:08:33 1997  Ian Lance Taylor  <ian@cygnus.com>

        * itbl-parse.y (yyerror): Make static.  Declare.

        From Ralf Baechle <ralf@gnu.ai.mit.edu>:
        * configure.in: Set emulations for mips-*-linux*-*.
        * configure: Rebuild.

        * config/tc-mips.c (struct mips_set_options): Define.
        (mips_opts): New static variable.
        (mips_isa): Remove.  Now a field in mips_opts.  Change all
        references.
        (mips16, mips16_autoextend, mips_warn_about_macros): Likewise.
        (mips_noreorder, mips_nomove, mips_noat, mips_nobopt): Likewise.
        (struct mips_option_stack): Define.
        (mips_opts_stack): New static variable.
        (s_mipsset): Add support for .set push and .set pop.
        * doc/c-mips.texi: Document .set push and .set pop.

        * config/obj-elf.c (obj_elf_section_change_hook): New function.
        * config/obj-elf.h (obj_elf_section_change_hook): Declare it.
        * config/tc-mips.c (s_change_sec): Call it if OBJ_ELF.

Thu Mar 27 12:23:56 1997  Ian Lance Taylor  <ian@cygnus.com>

        * as.c (parse_args): Update copyright date in version message.

        * Makefile.in (clean-here): Remove dependency files.

        * read.c (s_comm): Check S_IS_COMMON as well as S_IS_DEFINED.
        (s_mri_common): Check S_IS_COMMON unconditionally.
        * symbols.c (colon): Check S_IS_COMMON as well as S_IS_DEFINED.
        * config/tc-alpha.c (s_alpha_comm): Likewise.
        * config/tc-mips.c (nopic_need_relax): Likewise.
        * config/tc-ppc.c (ppc_elf_lcomm): Likewise.
        (ppc_pe_comm): Likewise.
        * config/obj-elf.c (obj_elf_common): Likewise.  Set segment of
        common symbol to bfd_com_section_ptr.
        * config/tc-sparc.c (s_common): Likewise.
        (tc_gen_reloc): Likewise.

start-sanitize-d30v
Thu Mar 27 00:29:46 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>

        * config/tc-d30v.c (md_apply_fix3): Get the relocs right.

end-sanitize-d30v       
Wed Mar 26 13:35:15 1997  H.J. Lu  <hjl@lucon.org>

        * config/tc-i386.c (tc_i386_fix_adjustable): Only define if
        BFD_ASSEMBLER.

Wed Mar 26 11:32:51 1997  Ian Lance Taylor  <ian@cygnus.com>

        * input-scrub.c (input_scrub_next_buffer): Handle very long input
        lines correctly.

        * listing.c (print_lines): Add lineno parameter.  Change all
        callers.
        (listing_listing): Only call calc_hex for the right line.
        (listing_list): Set the new edict based on the current edict, in
        order to handle listing commands in macros correctly.

        * config/tc-mips.c (insn_uses_reg): Map register numbers in mips16
        instructions.

        * cond.c (cond_finish_check): New function.
        * as.h (cond_finish_check): Declare.
        * as.c (main): Call cond_finish_check.

start-sanitize-d30v
Tue Mar 25 14:45:54 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>

        * config/tc-d30v.c (md_assemble): If two instructions
        are supposed to be assembled in parallel and the first one is
        long, print an error and stop.
        (md_apply_fix3): Don't calculate absolute relocs.  Just write
        them out.

end-sanitize-d30v       
Mon Mar 24 12:11:18 1997  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-i386.h (iclrKludge): Define.
        * config/tc-i386.c (md_assemble): Handle iclrKludge.

        * config/tc-alpha.h (tc_frob_file_before_adjust): Define if
        OBJ_ECOFF.
        (alpha_frob_file_before_adjust): Declare if OBJ_ECOFF.
        * config/tc-alpha.c (alpha_debug): New static variable.
        (md_parse_option): Set alpha_debug if -g is seen.
        (alpha_frob_file_before_adjust): New function if OBJ_ECOFF.

start-sanitize-d30v
Sun Mar 23 18:03:31 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>

        * config/tc-d30v.c (build_insn): Enable range-checking code.
        (postfix): Stop at space or comma.
        (md_assemble): Change error message.

end-sanitize-d30v       
Sat Mar 22 13:44:28 1997  Ian Lance Taylor  <ian@cygnus.com>

        * Makefile.in: Added automatic dependency building.
        * dep-in.sed: New file.

Fri Mar 21 15:42:37 1997  Ian Lance Taylor  <ian@cygnus.com>

        * config/obj-ieee.c (segment_name): Don't define function if this
        is a macro.

        * config/obj-coff.h (DO_STRIP): Don't define.
        * config/tc-h8300.h (DO_STRIP): Don't define.
        * config/tc-h8500.h (DO_STRIP): Don't define.
        * config/tc-w65.h (DO_STRIP): Don't define.
        * config/tc-z8k.h (DO_STRIP): Don't define.

        * symbols.c (colon): Call obj_frob_label if it is defined.
        * config/obj-vms.h (obj_frob_label): Rename from tc_frob_label.

        * configure.in: Don't set files and links.  Don't call
        AC_LINK_FILES.  Substitute te_file.  Create targ-cpu.h,
        obj-format.h, targ-env.h, and itbl-cpu.h in AC_OUTPUT.
        * configure: Rebuild.
        * Makefile.in (TARG_CPU_C): New variable.
        (TARG_CPU_O, TARG_CPU_H): New variables.
        (OBJ_FORMAT_C, OBJ_FORMAT_O, OBJ_FORMAT_H): New variables.
        (TARG_ENV_H, ATOF_TARG_C, ATOF_TARG_O): New variables.
        (SOURCES): Rename from REAL_SOURCES.  Delete old definition.
        (LINKED_SOURCES): Remove.
        (HEADERS): Rename from REAL_HEADERS.  Delete old definition.
        (LINKED_HEADERS): Remove.
        (OBJS): Use $(TARG_CPU_O), etc., rather than targ-cpu.o, etc.
        ($(OBJS)): Depend upon $(TARG_ENV_H), etc., rather than
        targ-cpu.h, etc.
        ($(TARG_CPU_O), $(OBJ_FORMAT_O) $(ATOF_TARG_O)): New targets.
        (targ-cpu.o, obj-format.o, atof-targ.o): Remove targets.
        (itbl-cpu.h): Remove target.
        (DISTCLEAN_HERE): Remove targ-cpu.c, obj-format.c, atof-targ.c,
        atof-targ.h.

Thu Mar 20 19:18:58 1997  Ian Lance Taylor  <ian@cygnus.com>

        * doc/as.texinfo (Symbol Names): Don't use obsolete @ctrl macro.

Thu Mar 20 16:49:14 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>

        * config/tc-m68k.c (mri_chip): Replace calls to get_symbol_end by
        open coded loop that does not require the name to start with a
        name beginner.

Thu Mar 20 13:42:01 1997  H.J. Lu  <hjl@lucon.org>

        * frags.c (frag_var): Change offset parameter to offsetT.
        (frag_variant): Likewise.
        * frags.h (frag_variant, frag_var): Update declarations.
        * config/tc-m68k.c (struct m68k_it): Change foff field to
        offsetT.
        (add_frag): Change off parameter to offsetT.
        * Several files: Add casts to calls to frag_var.

        * Makefile.in (m68k-parse.c): Depend upon itbl-parse.c, to
        serialize a parallel make.
        (itbl-parse.h): Split target out from itbl-parse.c.

Thu Mar 20 12:48:45 1997  Philippe De Muyter  <phdm@info.ucl.ac.be>

        * config/m68k-parse.y (motorola_operand): Allow (zdireg,EXPR).

        * config/te-delta.h (COFF_COMMON_ADDEND): Define.
        * config/obj-coff.c (fixup_segment): Check COFF_COMMON_ADDEND when
        storing the value of a common symbol.

Wed Mar 19 11:37:57 1997  Philippe De Muyter  <phdm@info.ucl.ac.be>

        * config/obj-coff.c (glue_symbols): Unused variable symbolP
        removed.
        (crawl_symbols): Do not modify symbol_rootP and symbol_lastP here;
        that is done by symbol_remove and symbol_insert.

        * config/obj-coff.h (S_IS_LOCAL): Return 0 for a debugging
        symbol.

Wed Mar 19 11:06:29 1997  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-mips.c (load_register): In 32 bit mode, when not
        dealing with a 64 bit number, permit the upper 32 bits to be set
        even if bit 31 is not set.

Tue Mar 18 23:30:14 1997  Ian Lance Taylor  <ian@cygnus.com>

        * read.c (potable): Add "equiv".
        (s_set): Handle .equiv based on argument.
        * doc/as.texinfo (Equiv): New node to document .equiv.
        (Err): New node to document .err.

Tue Mar 18 15:50:13 1997  H.J. Lu  <hjl@lucon.org>

        * Many files: Add function prototypes.
        * as.c (show_usage, parse_args): Make static.
        * frags.h (frag_alloc): Declare.
        * subsegs.c (subseg_set_rest): Don't declare frag_alloc.
        * symbols.c (dollar_label_instance): Change return type to long.
        * symbols.h (print_symbol_value): Declare.
        (print_expr, print_expr_1, print_symbol_value_1): Declare.
        * write.c (fix_new_exp): Don't declare make_expr_symbol.
        (remove_subsegs, relax_frag): Make static.
        * config/atof-vax.c (atof_vax_sizeof): Change letter to int.
        (what_kind_of_float): Likewise.
        (atof_vax): Make static.  Change what_kind to int.
        (md_atof): Change what_statement_type to int.
        * config/obj-ecoff.h (obj_ecoff_set_ext): Declare.
        * config/tc-alpha.c (vax_md_atof): Declare.
        (md_atof): Don't declare atof_ieee and vax_md_atof.
        * config/tc-i386.c (set_16bit_code_flag): Make static.
        * config/tc-i386.h (tc_i386_fix_adjustable): Declare.
        * config/tc-m68k.c (add_fix): Change width to int.
        (insert_reg): Change regname to const.
        (md_atof): Don't declare atof_ieee.
        (demand_empty_rest_of_line): Don't declare.
        * config/tc-m88k.c (md_atof): Don't declare atof_ieee.
        * config/tc-sparc.c (cmp_reg_entry): Change args to const PTR.
        (parse_keyword_arg): Change lookup_fn to take const arg.
        (md_atof): Don't declare atof_ieee.
        * config/tc-sparc.h: Add ifdef for multiple inclusion.
        (tc_aout_pre_write_hook): Don't declare.

Mon Mar 17 11:21:09 1997  Ian Lance Taylor  <ian@cygnus.com>

        * as.h (bfd_alloc_by_size_t): Don't declare.
        * Many files: Use xmalloc rather than bfd_alloc_by_size_t.

Sun Mar 16 13:49:21 1997  Philippe De Muyter <phdm@info.ucl.ac.be>

        * symbols.c (symbol_new): Don't call debug_verify_symchain.
        (symbol_append): Set sy_next and sy_previous when adding a single
        symbol to an empty list.  Call debug_verify_symchain.
        (verify_symbol_chain): Use assert, not know.

Sat Mar 15 20:27:12 1997  Fred Fish  <fnf@cygnus.com>

        * NEWS: Note BeOS support.
        * configure.in: (ppc-*-beos): New target, use coff as object format.
        * configure: Regenerate with autoconf.
        
Sat Mar 15 19:14:02 1997  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-mips.c (md_apply_fix): Improve error message for out
        of range branch.

        * Makefile.in: Add dependencies on obstack.h where needed.

Fri Mar 14 15:33:38 1997  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-mips.c (md_estimate_size_before_relax): Handle the
        case of a symbol equated to another symbol when using SVR4_PIC.

        * Makefile.in (TARG_CPU_DEP_sparc): Add opcode/sparc.h.

Thu Mar 13 11:20:51 1997  Ian Lance Taylor  <ian@cygnus.com>

        * read.c (read_a_source_file): Call LISTING_NEWLINE before
        HANDLE_CONDITIONAL_ASSEMBLY when handling an MRI line label.

        * config/obj-elf.c (obj_elf_data): Call md_flush_pending_output
        and md_elf_section_change_hook if they are defined.
        (obj_elf_text, obj_elf_previous): Likewise.

Wed Mar 12 11:40:20 1997  Ian Lance Taylor  <ian@cygnus.com>

        * config/obj-multi.h (struct elf_obj_sy): Define if
        OBJ_MAYBE_ELF.
        (OBJ_SYMFIELD_TYPE): Define as struct elf_obj_sy if
        OBJ_MAYBE_ELF.
        * config/obj-elf.h (struct elf_obj_sy): Don't define if
        OBJ_SYMFIELD_TYPE is defined.

        * doc/as.texinfo (bss): Improve description of .bss section.  In
        ELF or COFF, you are permitted to switch into the section.
        (Comm): Rewrite description of common symbols.
        (Lcomm): Mention that some targets permit a third argument.

Tue Mar 11 01:13:31 1997  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-ppc.c (ppc_elf_lcomm): Don't call S_CLEAR_EXTERNAL.

        * symbols.c (colon): Change type of local to int.  From Alan Modra
        <alan@spri.levels.unisa.edu.au>.

        * config/tc-m88k.c (m88k_do_align): Don't use a special nop
        alignment if a zero fill pattern was explicitly specified.
        * config/tc-sh.c (sh_do_align): Likewise.

        * read.c (equals): Always permit register names to be redefined.

        * config/tc-mips.c (mips_fix_adjustable): Permit a reloc against a
        mips16 symbol to be adjusted if a symbol is being subtracted from
        it.

        From Eric Youngdale <eric@andante.jic.com>:
        * config/obj-elf.c (obj_elf_symver): Check for duplicate or
        illegal symbol version names.
        (elf_frob_symbol): Check for external default versions.

Sun Mar  9 23:49:12 1997  Ian Lance Taylor  <ian@cygnus.com>

        From Eric Youngdale <eric@andante.jic.com>:
        * config/obj-elf.h (struct elf_obj_sy): Define.
        (OBJ_SYMFIELD_TYPE): Define to elf_obj_sy struct.  Change all
        users.
        * config/obj-elf.c (obj_elf_symver): Just record the name.
        (obj_symbol_new_hook): Initialized versioned_name field.
        (elf_frob_symbol): If there is a versioned_name, either rename the
        symbol, or add an alias with that name.

Thu Mar  6 13:55:32 1997  Jeffrey A Law  (law@cygnus.com)

        * config/tc-mn10300.c (md_relax_table): Define.
        (md_convert_frag): Implement.
        (md_assemble): Handle relaxable operands/instructions correctly.
        (md_estimate_size_before_relax): Implement.
        * config/tc-mn10300.h (TC_GENERIC_RELAX_TABLE): Define.

        * config/tc-mn10200.c (md_relax_table): Fix typos.

        * config/tc-mn10300.c (md_assemble): Don't use any MN10300 specific
        relocs anymore.  Tweak fx_offset for pc-relative relocs.

Wed Mar  5 15:46:16 1997  Ian Lance Taylor  <ian@cygnus.com>

        * cond.c (s_ifc): Call mri_comment_field and mri_comment_end when
        in MRI mode.

start-sanitize-tic80
Tue Mar  4 19:34:21 1997  Fred Fish  <fnf@cygnus.com>

        * config/tc-tic80.c (md_pseudo_table): Add "sect" and "section"
        pseudo-ops.
        * config/tc-tic80.c (md_begin): Declare external variable
        coff_flags and insert an F_AR32WR bit into it.

end-sanitize-tic80
Tue Mar  4 10:01:04 1997  Ian Lance Taylor  <ian@cygnus.com>

        * read.c (equals): Add reassign parameter.  Change all callers.
        * read.h (equals): Update declaration.

Sat Mar  1 01:04:04 1997  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-mips.c (mips16_extended_frag): Don't assume that we
        can rely on the frag address to determine whether a frag is
        earlier or later.

Fri Feb 28 14:40:00 1997  Ian Lance Taylor  <ian@cygnus.com>

        * write.h (LOCAL_LABEL): Only define if not BFD_ASSEMBLER.
        (S_LOCAL_NAME): Likewise.
        (FAKE_LABEL_NAME): Define unconditionally.
        * symbols.c (colon): Call bfd_is_local_label, not LOCAL_LABEL, if
        BFD_ASSEMBLER.
        (S_IS_LOCAL): Call bfd_is_local_label_name, not LOCAL_LABEL.
        * config/tc-*.h: Only define LOCAL_LABEL if not BFD_ASSEMBLER.
        Don't define FAKE_LABEL_NAME.
        * config/te-ic960.h: Likewise.
        * config/tc-mips.h (tc_frob_file_before_adjust): Define.
        (mips_frob_file_before_adjust): Declare.
        * config/tc-mips.c (mips_frob_file_before_adjust): New function.
        (mips_local_label): Remove.

        * config/te-sco386.h: Remove; not used.

start-sanitize-tic80
Thu Feb 27 15:39:16 1997  Fred Fish  <fnf@cygnus.com>

        * config/tc-tic80 (md_pseudo_table): Add align pseudo op to do
        byte alignment rather than power-of-two alignment that is the
        GAS default.

end-sanitize-tic80
Thu Feb 27 13:29:04 1997  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-m68k.c (md_assemble): Handle a reloc width of 'W'.

        * gasp.c (hash_add_to_string_table): Correct misspelling in error
        message, and add newline.
        (process_file): Don't process assignments in the label if this is
        a equ or assign pseudo-op.
        (process_pseudo_op): Swap first argument to do_assign for K_ASSIGN
        and K_EQU, to match documentation.

Thu Feb 27 12:00:03 1997  Michael Meissner  <meissner@cygnus.com>

        * config/obj-coff.c (obj_coff_section): Add 'r' section attribute
        to denote read-only data sections.

Thu Feb 27 00:26:33 1997  Ian Lance Taylor  <ian@cygnus.com>

        * config/obj-elf.c (obj_elf_common): Set BSF_OBJECT in flags.
        * config/tc-sparc.c (s_common): Likewise, if BFD_ASSEMBLER.

        * expr.c (operand): Simplify 0b handling.  Don't treat 0b as a
        binary number if the next character is '+' or '-'.

start-sanitize-tic80
Wed Feb 26 20:47:12 1997  Fred Fish  <fnf@cygnus.com>

        * config/tc-tic80.c (FLT_CHARS): Change from "dD" to "fF".
        (find_opcode): Match operands that can be floats.
        (build_insn): Handle O_big (float) expressions and build
        correct opcode.

end-sanitize-tic80
Wed Feb 26 18:19:00 1997  Stan Shebs  <shebs@andros.cygnus.com>

        * configure.in (mips*-*-lnews*): New target, also make empty
        emulation list for this target.
        * configure: Update.
        * tc-mips.c (ECOFF_LITTLE_FORMAT): Define.
        (mips_target_format): Use.
        * te-lnews.h: New file.

start-sanitize-tic80
Wed Feb 26 15:33:46 1997  Fred Fish  <fnf@cygnus.com>

        * config/tc-tic80.c (find_opcode, build_insn): Changes to match
        operands with :m or :s modifiers and generate the right opcodes
        for them.

end-sanitize-tic80
Wed Feb 26 11:56:11 1997  Ian Lance Taylor  <ian@cygnus.com>

        * Makefile.in (itbl-parse.c itbl-parse.h): Use $(BISON) and
        $(BISONFLAGS), not $(YACC) and $(YACCFLAGS).

Tue Feb 25 22:02:23 1997  Philippe De Muyter  <phdm@info.ucl.ac.be>

        * config/tc-m68k.c (instring): Useless local declaration of
        crack_operand removed.
        * expr.h (expressionS): Changed type of X_op field to operatorT if
        __GNUC__.

Tue Feb 25 13:17:27 1997  Ian Lance Taylor  <ian@cygnus.com>

        Based on patches from Robert Lipe <robertl@dgii.com>:
        * configure.in: Add i386coff and i386elf to emulation list.
        * configure: Rebuild.
        * as.c (i386coff, i386elf): Declare.
        * obj.h (coff_format_ops): Declare.
        * config/obj-coff.c (OBJ_HEADER): Define.
        (coff_obj_symbol_new_hook): Rename from obj_symbol_new_hook.
        (coff_obj_read_begin_hook): Rename from obj_read_begin_hook.
        (obj_pseudo_table): Add "version".
        (coff_pop_insert): New static function.
        (coff_sec_sym_ok_for_reloc): New static function.
        (no_func): New static function.
        (coff_format_ops): New variable.
        * config/obj-coff.h (coff_obj_symbol_new_hook): Declare.
        (obj_symbol_new_hook): Define.
        (coff_obj_read_begin_hook): Declare.
        (obj_read_begin_hook): Define.
        * config/tc-i386.h (i386_target_format): Declare.
        * config/tc-i386.c: Check OBJ_MAYBE_ELF as well as OBJ_ELF; check
        OUTPUT_FLAVOR when appropriate.
        (i386_target_format): New function.
        * Makefile.in (obj-coff.o): New target.
        (e-i386coff.o, e-i386elf.o): New targets.

        From Stephen Williams <steve@icarus.icarus.com>:
        * config/tc-i960.h (TC_SYMFIELD_TYPE): Define if OBJ_COFF.
        (_tc_get_bal_of_call): Don't declare.
        (tc_get_bal_of_call): Declare as function, don't define as macro.
        * config/tc-i960.c (tc_set_bal_of_call): If OBJ_COFF, store balP
        in sy_tc field, not x_balntry field.
        (tc_get_bal_of_call): Rename from _tc_get_bal_of_call.  Change
        return type to symbolS *.  If OBJ_COFF, retrieve value from sy_tc
        field, not x_balntry field.

        * config/obj-elf.c (obj_elf_section): Permit a .note section to
        have the SHF_ALLOC attribute.

        * Makefile.in ($(OBJS)): Don't depend upon $(IT_HDRS).
        (TARG_CPU_DEP_mips): Depend upon $(srcdir)/itbl-ops.h.
        (itbl-lex.o): Depend upon itbl-parse.h.

        * itbl-parse.y (yyerror): Change return type to int.  Change to
        use old style function declaration.

        * Makefile.in (itbl-lex.o): Remove -Wall.
        (itbl-parse.o): Likewise.

        * cond.c (s_ifdef): If we should omit conditionals from listings,
        call listing_list.
        (s_if, s_ifc, s_endif, s_else, s_ifeqs): Likewise.
        * listing.c (list_info_struct): Add EDICT_NOLIST_NEXT.
        (listing_listing): Handle EDICT_NOLIST_NEXT.
        (listing_list): An argument of 2 means EDICT_NOLIST_NEXT.
        * listing.h (LISTING_NOCOND): Define.
        (LISTING_SKIP_COND): Define.
        * as.c (show_usage): Mention c as a suboption of -a.
        (parse_args): Handle c as a suboption of -a.
        * doc/as.texinfo: Document -alc.

start-sanitize-tic80
Mon Feb 24 23:34:14 1997  Fred Fish  <fnf@cygnus.com>

        * config/tc-tic80.c (md_apply_fix): Handle R_ABS type fixups.

end-sanitize-tic80
Mon Feb 24 18:27:43 1997  Eric Youngdale  <eric@andante.jic.com>

        * doc/as.texinfo: Document .symver.

Mon Feb 24 15:19:57 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>

        * config/tc-d10v.c: Change pre_defined_registers to 
        d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.

Mon Feb 24 10:40:45 1997  Fred Fish  <fnf@cygnus.com>

        * config/obj-coff.c: Fix typo in comment section.
start-sanitize-tic80
        * config/tc-tic80.c (md_pseudo_table): Add entry for bss, which takes
        an additional alignment argument.
        (find_opcode): Allow O_symbol relocs for any 32 bit field, not just
        base relative ones.
        (build_insn): Handle O_symbol relocs for any 32 bit field, not just
        base relative ones.
end-sanitize-tic80

Mon Feb 24 02:23:00 1997  Dawn Perchik  <dawn@cygnus.com>

        * Makefile.in: Remove dependancies on itbl-cpu.h.
        * as.c: Define stubs for itbl_parse and itbl_init if HAVE_ITBL_CPU 
        is not defined.

Mon Feb 24 02:03:00 1997  Dawn Perchik  <dawn@cygnus.com>

        * itbl-ops.h: Include as.h.

Mon Feb 24 01:04:00 1997  Dawn Perchik  <dawn@cygnus.com>

        * as.c: Remove -t option.
        * configure, configure.in: Move itbl-cpu.h to mips specific configure.
        * itbl-ops.h: Include itbl-cpu.h only if HAVE_ITBL_CPU is defined.
        * config/tc-mips.h: Define HAVE_ITBL_CPU.

Sun Feb 23 18:01:00 1997  Dawn Perchik  <dawn@cygnus.com>

        * itbl-ops.c: Don't define DEBUG.

Sun Feb 23 17:49:00 1997  Dawn Perchik  <dawn@cygnus.com>

        * Makefile.in: Update itbl-test.c to reflect its new location.

Sun Feb 23 15:50:00 1997  Dawn Perchik  <dawn@cygnus.com>

        * itbl-ops.c: Add test for itbl_have_entries.
        * config/tc-mips.c: Remove test for itbl_have_entries.
        * config/tc-mips.h: Define tc_init_after_args to mips_init_after_args.

Sun Feb 23 18:13:19 1997  Ian Lance Taylor  <ian@cygnus.com>

        * Makefile.in (DISTSTUFF): Remove itbl-parse.y, itbl-lex.l, and
        itbl-ops.c.  Add itbl-parse.c and itbl-lex.c.
        (LEX, LEXFLAGS): Define.
        * itbl-ops.c (append_insns_as_macros): Remove bogus ASSERT.

Sat Feb 22 21:25:00 1997  Dawn Perchik  <dawn@cygnus.com>

        * itbl-parse.y: Fix indentation mistakes from indent program.
        * itbl-lex.l: Fix indentation mistakes from indent program.
        * itbl-ops.h: Add include for ansidecl.h.
        Add PARAMS around function arguments.
        Add declaration for itbl_have_entries.
        * itbl-ops.c: Add PARAMS around function arguments.
        * Makefile.in: Add itbl build rules.
        Add dependancies for itbl files to mips target.
        * as.c: Add itbl support.
        Add new option "--insttbl" for dynamically extending instruction set.
        * as.h: Declare insttbl_file_name;
        the name of file defining extensions to the basic instruction set 
        * configure.in, configure: Add itbl-parse.o, itbl-lex.o, and 
        itbl-ops.o to extra_objects for mips configuration.
        Add include file link from itbl-cpu.h to 
        config/itbl-${target_cpu_type}.h.
        * config/tc-mips.c: Allow copz instructions.
        Add notes for future additions to the itbl support.
        Add debug macros.
        (macro): Call itbl_assemble to assemble itbl instructions.
        See if an unknown register is specified in an itbl entry.

Sat Feb 22 20:53:01 1997  Fred Fish  <fnf@cygnus.com>
        * doc/internals.texi (CPU backend): Fix typo in md_section_align
        description.
start-sanitize-tic80
        * config/tc-tic80.h (NEED_FX_R_TYPE): Define.
        * config/tc-tic80.c (find_opcode): Add code to support O_symbol
        operands.
        (build_insn): Grab a frag early so we can use the address in
        fixups.  Take one's complement of BITNUM values before insertion
        in opcode.  Add code to support O_symbol operands.
        (md_apply_fix): Replace unimplemented warning with implementation.
        (md_pcrel_from): Ditto.
        (tc_coff_fix2rtype): Ditto.
end-sanitize-tic80

Fri Feb 21 14:34:31 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>
start-sanitize-d30v
        * config/tc-d30v.c (parallel_ok): New function. 
        * config/tc-d30v.h: Define TARGET_BYTES_BIG_ENDIAN.
end-sanitize-d30v
        * config/tc-d10v.c (md_pcrel_from_section): Return 0 if
        relocation is in different section.

Fri Feb 21 10:08:25 1997  Jim Wilson  <wilson@cygnus.com>

        * tc-mips.c (mips_ip): If configured for an embedded ELF system,
        don't set the section alignment to 2**4.

Fri Feb 21 11:55:03 1997  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-m68k.c (line_comment_chars): Add '*'.

        * app.c (LEX_IS_TWOCHAR_COMMENT_2ND): Don't define.
        (do_scrub_begin): Don't set lex['*'].
        (do_scrub_chars): When handling LEX_IS_TWOCHAR_COMMENT_1ST, don't
        check for LEX_IS_TWOCHAR_COMMENT_2ND.  Instead, just check for
        a literal '*'.

        * configure.in: Set em=svr4 for m68k-*-sysv4*.
        * configure: Rebuild.
        * config/te-svr4.h: New file.
        * config/tc-m68k.c (m68k_comment_chars): Only include `#' if
        TE_SVR4 or TE_DELTA.

Thu Feb 20 22:24:39 1997  Jeffrey A Law  (law@cygnus.com)

        * config/tc-mn10200.c (md_convert_frag): Create a fixup for the
        short conditional branch around a long unconditional branch.

Thu Feb 20 13:56:00 1997  Ian Lance Taylor  <ian@cygnus.com>

        * config/obj-coff.c (obj_coff_ln [both versions]): Call
        new_logical_line.

        * config/tc-arm.c (fix_new_arm): Use make_expr_symbol to handle a
        complex expression.

        * symbols.c (resolve_symbol_value): If both left and right
        operands are undefined, warn about both of them.

Wed Feb 19 00:53:28 1997  Ian Lance Taylor  <ian@cygnus.com>

        Based on patches from Eric Youngdale <eric@andante.jic.com>:
        * config/obj-elf.c (elf_pseudo_table): Add "symver".
        (obj_elf_symver): New static function.
        * config/obj-elf.h (OBJ_COPY_SYMBOL_ATTRIBUTES): Copy the st_other
        field.

        * write.c (relax_segment): Make type and printf format agree.

        * read.c (get_line_sb): Don't end the line on a semicolon inside a
        string.

start-sanitize-d30v
Tue Feb 18 18:42:51 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>

        * config/tc-d30v.c, config/tc-d30v.h: New files.

        * configure: Rebuilt.
        
        * configure.in: Add case for d30v.

end-sanitize-d30v       
Sun Feb 16 17:47:29 1997  Fred Fish  <fnf@cygnus.com>

        * config/tc-alpha.h (md_operand): Define with a null expansion,
        like all the other targets.
        * doc/internals.texi (CPU backend): Add missing word in 
        md_flush_pending_output description.  Fix typo in md_convert_frag
        description.
start-sanitize-tic80
        * config/tc-tic80: Minor comment additions/changes.
end-sanitize-tic80
        
Fri Feb 14 18:09:59 1997  Philippe De Muyter  <phdm@info.ucl.ac.be>

        * config/tc-m68k.c (LOCAL_LABEL): Macro redefined if TE_DELTA.
        (tc_canonicalize_symbol_name): Macro defined if TE_DELTA.
        * config/obj-coff.c (obj_coff_def): Use
        tc_canonicalize_symbol_name if defined.
        (obj_coff_tag, obj_coff_val): Likewise.
        * expr.c (operand): Reject '~' as operator if is_name_beginner.

Fri Feb 14 17:24:48 1997  Ian Lance Taylor  <ian@cygnus.com>

        Based on notes from Peter Eriksson <peter@ifm.liu.se>.  The target
        does not actually work, though:
        * configure.in (i386-sequent-bsd*): New target.
        * configure: Rebuild.
        * config/tc-dynix.h: New file.
        * config/tc-i386.h: Define TARGET_FORMAT if TE_DYNIX.

        * read.c (do_align): Add max parameter.  Change all callers.
        Remove useless static variables.
        (s_align): New static function.  Do common portion of
        s_align_bytes and s_align_ptwo.
        (s_align_bytes, s_align_ptwo): Just call s_align.
        * frags.c (frag_align): Add max parameter.  Change all callers.
        (frag_align_pattern): Likewise.
        * frags.h (frag_align, frag_align_pattern): Update declarations.
        * write.c (relax_segment): Limit alignment change to fr_subtype.
        Fix some types to be addressT.
        * config/obj-coff.c (size_section): Likewise.
        * config/obj-ieee.c (size_section): Likewise.
        * config/tc-d10v.h (md_do_align): Add max parameter.
        * config/tc-i386.h (md_do_align): Likewise.
        * config/tc-m88k.h (md_do_align): Likewise.
        * config/tc-m88k.c (m88k_do_align): Likewise.
        * config/tc-sh.h (md_do_align): Likewise.
        * config/tc-sh.c (sh_do_align): Likewise.
        * as.h: Improve comments on rs_align and rs_align_code.
        * doc/as.texinfo: Document new alignment arguments.
        * doc/internals.texi (Frags): Document use of fr_subtype field for
        rs_align and rs_align_code.

Fri Feb 14 15:56:06 1997  Gavin Koch  <gavin@cygnus.com>

        * config/tc-mips.c: Changed opcode parsing.

Thu Feb 13 20:02:16 1997  Fred Fish  <fnf@cygnus.com>

        * config/{tc-alpha.h, tc-d10v.h, tc-generic.h, tc-i960.h,
        tc-mn10200.h, tc-mn10300.h, tc-sh.h, tc-vax.h, tc-w65.h}:
        Add default definition of zero for TARGET_BYTES_BIG_ENDIAN.
        * config/{tc-arm.h, tc-hppa.h, tc-i386.h, tc-mips.h, tc-ns32k.h,
        tc-ppc.h, tc-sparc.h}: Move definition of TARGET_BYTES_BIG_ENDIAN
        to a location consistent with the rest of the target include files.
        * config/tc-i386.c: Remove misleading comment.
        * doc/internals.texi (CPU backend): Add description of function
        md_undefined_symbol.
start-sanitize-tic80
        * config/tc-tic80.c: Add code to insert predefined symbols into the
        symbol table so they can be parsed by the standard expression parser.
        Remove custom code that use to parse them.
        * config/tc-tic80.h: Move definition of TARGET_BYTES_BIG_ENDIAN
        to a location consistent with the rest of the target include files.
end-sanitize-tic80
        
Thu Feb 13 21:44:18 1997  Klaus Kaempf  <kkaempf@progis.de>

        * as.h: GNU c provides unlink() function.

        Unify section handling on openVMS/Alpha:
        * config/tc-alpha.c(s_alpha_link): Remove.
        (s_alpha_section): New function.
        Remove case-hacking of symbols
        Add .code_address pseudo-op.
        (BFD_RELOC_ALPHA_CODEADDR): New relocation.
        (s_alpha_code_address): New function.
        (alpha_ctors_section, alpha_dtors_section): New sections for C++
        static constructors/destructors.
        Add debug code for crash debugs, to be removed when traceback code
        is added to object code.
        (s_alpha_name): New function for .name pseudo-op.
        (alpha_print_token): New function to print token expressions with
        alpha specific extensions.

        * makefile.vms: Allow compilation with current gcc snapshot.

Thu Feb 13 16:29:04 1997  Fred Fish  <fnf@cygnus.com>

        * doc/Makefile.in (TEXI2DVI): Set to just name of program.
        (DVIPS): Set to dvips.
        (ps, as.ps, gasp.ps): New targets.
        (internals.info, gasp.dvi, internals.dvi): Set both TEXINPUTS
        and MAKEINFO env variables.
        (internals.ps): Use DVIPS macro.
        (clean): Remove core and backup files.
        (distclean): Remove temporary files from building internals.
        (clean-dvi): Ditto.
        * doc/internals.texi (Frags): Fix typo.
        (GAS processing): Ditto.
        (CPU backend): Ditto.
        * ecoff.c (init_file): Use TARGET_BYTES_BIG_ENDIAN value directly.
        * mpw-config.in: Define TARGET_BYTES_BIG_ENDIAN as 1.
        * read.c: Remove ugly hack that dealt with config files not
        correctly defining TARGET_BYTES_BIG_ENDIAN.
        (target_big_endian): Use TARGET_BYTES_BIG_ENDIAN directly.
        * config/arm-big.mt: Define TARGET_BYTES_BIG_ENDIAN to 1.
        * config/arm-lit.mt: Define TARGET_BYTES_BIG_ENDIAN to 0.
        * config/mips-big.mt: Define TARGET_BYTES_BIG_ENDIAN to 1.
        * config/mips-lit.mt: Define TARGET_BYTES_BIG_ENDIAN to 0.
        * config/ppc-lit.mt: Define TARGET_BYTES_BIG_ENDIAN to 1.
        * config/ppc-sol.mt: Replace TARGET_BYTES_LITTLE_ENDIAN
        with TARGET_BYTES_BIG_ENDIAN defined to 0.
        * config/tc-arm.h: Remove use of TARGET_BYTES_LITTLE_ENDIAN
        and simplify.  Test value of TARGET_BYTES_BIG_ENDIAN, not just
        whether it is defined or not.
        * config/tc-mips.h: Remove use of TARGET_BYTES_LITTLE_ENDIAN.
        * config/tc-ppc.h: Remove use of TARGET_BYTES_LITTLE_ENDIAN
        and simplify. Test value of TARGET_BYTES_BIG_ENDIAN, not just
        whether it is defined or not.
start-sanitize-tic80
        * config/tic80.h (TARGET_FORMAT): Define to coff-tic80.
        (TARGET_BYTES_BIG_ENDIAN): Define to 0.
end-sanitize-tic80
        
Thu Feb 13 14:40:16 1997  Doug Evans  <dje@canuck.cygnus.com>

        * write.c (write_relocs): Correct text in as_fatal error message,
        bfd_perform_relocation -> bfd_install_relocation.

Thu Feb 13 14:48:03 1997  Philippe De Muyter  <phdm@info.ucl.ac.be>

        * config/tc-m68k.c (LEX_TILDE): Define if TE_DELTA.
        * read.c (LEX_TILDE): Define if not defined.
        (lex_type): Use LEX_TILDE.
        * expr.c (get_symbol_end): Check first char with is_name_beginner,
        not is_part_of_name.

Thu Feb 13 11:40:58 1997  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-sparc.c (md_show_usage): Add missing backslash at end
        of continued line.

        * config/tc-mips.c (mips16_extended_frag): Correct base address
        for an extended PC relative instruction.
        (md_convert_frag): Likewise.

        * config/tc-mips.c (prev_nop_frag): New static variable.
        (prev_nop_frag_holds): New static variable.
        (prev_nop_frag_required): New static variable.
        (prev_nop_frag_since): New static variable.
        (append_insn): If we aren't reordering, and prev_nop_frag is not
        NULL, and we don't need any nops, then decrease the size of
        prev_nop_frag.  Don't insert nops because of instructions in
        noreorder sections.  Remember whether the previous instructions
        where in noreorder sections even when not reordering.
        (mips_no_prev_insn): Add preserver parameter.  Change all
        callers.  Refer prev_nop_frag variables when appropriate.
        (mips_emit_delays): Set up prev_nop_frag.
        (s_mipsset): Clear prev_nop_frag if reordering.

Wed Feb 12 14:36:29 1997  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-mips.c (append_insn): Remove useless code which
        handled swapping a mips16 jump with a mips16 instruction with a
        reloc.

        * config/tc-mips.c (md_parse_option): When debugging, set
        mips_optimize to 1, not 0.

        * config/tc-mips.c (mips16_ip): Handle an extend operand.

        * config/tc-mips.c (my_getExpression): In mips16 mode, if it looks
        like the expression was based on `.', adjust the value of the
        symbol.

        * config/tc-mips.c (append_insn): Warn about an attempt to put an
        extended instruction in a delay slot when not reordering.
        (md_convert_frag): Warn if an extended instruction appears in a
        delay slot.

        * config/tc-mips.c (mips_pseudo_table): Add "insn".
        (s_insn): New static function.
        * doc/c-mips.texi: Document .insn.

        * config/tc-mips.c (md_begin): Add the general registers to the
        symbol table.
        (mips16_ip): First parse the expression, and then see whether it
        came up with a register, rather than trying to first see whether
        we are looking at a register.

start-sanitize-tic80
Tue Feb 11 15:13:39 1997  Fred Fish  <fnf@cygnus.com>

        * config/tc-tic80.c: Numerous changes and additions to flesh
        out functions that were previously just stubs, and fix some
        problems found using the new TIc80 testsuite cases.

end-sanitize-tic80
Tue Feb 11 15:52:22 1997  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-mips.c (mips16_ip): Handle %gprel modifier.
        (md_apply_fix): Handle BFD_RELOC_MIPS16_GPREL.

        * config/tc-mips.c (append_insn): Output jump instruction as a
        pair of 2 byte instructions, rather than as a single 4 byte
        instruction.

start-sanitize-r5900
        * config/tc-mips.c (md_begin): Correct test of mips_5900.
        (mips_ip): Don't check INSN_ISA for a macro.

end-sanitize-r5900
start-sanitize-r5900
Fri Feb  7 11:11:06 1997  Gavin Koch  <gavin@cygnus.com>
        
        * config/tc-mips.c: added r5900.
        
end-sanitize-r5900
Mon Feb 10 22:06:00 1997  Dawn Perchik  (dawn@cygnus.com)

        * itbl-ops.c, itbl-lex.l, itbl-parse.y, itbl-ops.h,
        config/itbl-mips.h: Add copyright message and fix indentation.

Mon Feb 10 18:09:00 1997  Dawn Perchik  (dawn@cygnus.com)

        * itbl-ops.c: New file.  Add support for dynamically read 
        instruction registers, opcodes and formats.  Build internal table 
        for new instructions and provide callbacks for assembler and 
        disassembler.
        * itbl-lex.l, itbl-parse.y: Lex and yacc parsers for instruction 
        spec table.
        * itbl-ops.h: New file.  Header file for itbl support.
        * config/itbl-mips.h: New file.  Mips specific definitions for
        itbl support.

Fri Feb  7 09:52:34 1997  Jeffrey A Law  (law@cygnus.com)

        * config/tc-mn10200.c (md_assemble): If a constant operand won't
        fit into the constant field of a relaxable operand, then it does
        not match.

Thu Feb  6 20:08:12 1997  Jeffrey A Law  (law@cygnus.com)

        * config/tc-mn10200.c (md_estimate_size_before_relax): Treat
        a jsr target in a different section just like a jsr to
        an undefined target.

Thu Feb  6 16:52:57 1997  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-mips.c (mips_fix_adjustable): Don't adjust relocations
        against any mips16 symbols, not just externally visible ones.
        (md_apply_fix): Corresponding change.

Wed Feb  5 11:11:06 1997  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-mips.c (mips16_ip): Accept floating point registers in
        the operand of the exit instruction.

Tue Feb  4 14:12:39 1997  Ian Lance Taylor  <ian@cygnus.com>

        * symbols.c (resolve_symbol_value): If we leave an equated symbol
        as O_symbol, copy over the segment.

Mon Feb  3 12:35:54 1997  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-mips.c (md_apply_fix): If we aren't adjusting this
        fixup to be against the section symbol, adjust the value
        accordingly.

        * symbols.c (resolve_symbol_value): Don't change X_add_number for
        an equated symbol.
        * write.c (write_relocs): Avoid looping on equated symbols.
        Adjust fx_offset by X_add_number for each symbol.
        * config/obj-coff.c (do_relocs_for): Avoid looping on equated
        symbols.
        (fixup_segment): Add a loop to track down equated symbols and
        adjust fx_offset appropriately.

Fri Jan 31 15:21:02 1997  Jeffrey A Law  (law@cygnus.com)

        * config/tc-mn10200.c (md_relax_table): Add entries to allow
        jmp -> bra relaxing.
        (md_convert_frag): Handle jmp->bra relaxing.
        (md_assemble): Handle jmp->bra relaxing.
        (md_estimate_size_before_relax): Likewise.

Fri Jan 31 13:15:05 1997  Alan Modra  <alan@spri.levels.unisa.edu.au>

        * config/tc-i386.c (i386_align_code): Add comments explaining the
        nop instructions.

Fri Jan 31 10:46:14 1997  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-sparc.c (enforce_aligned_data): New static variable.
        (sparc_cons_align): Don't do anything unless enforce_aligned_data
        is set.
        (md_longopts): Add "enforce-aligned-data".
        (md_show_usage): Mention --enforce-aligned-data.
        * doc/c-sparc.texi (Sparc-Aligned-Data): New node; document
        enforce-aligned-data.

        * config/tc-ppc.c (md_pseudo_table): If OBJ_XCOFF, add "long",
        "word", and "short".
        (ppc_xcoff_cons): New static function.

        * write.c (relax_segment): Give an error if a .space symbol is
        common or undefined.

        * read.c (read_a_source_file): Don't handle mri_pending_align if
        the handler is s_globl or s_ignore.

Thu Jan 30 11:46:59 1997  Fred Fish  <fnf@cygnus.com>

        * config/tc-d10v.c (find_opcode): Remove unused variable "numops".
start-sanitize-tic80
        * config/tc-tic80.c: Many additions to previous placeholder file.
        * config/tc-tic80.h: Ditto.
end-sanitize-tic80

Thu Jan 30 12:28:18 1997  Alan Modra  <alan@spri.levels.unisa.edu.au>

        * config/tc-i386.c (i386_align_code): Improve the nop patterns.

Thu Jan 30 12:08:40 1997  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-mips.c (mips_fix_adjustable): New function.
        * config/tc-mips.h (tc_fix_adjustable): Call mips_fix_adjustable.
        (mips_fix_adjustable): Declare.

        Ideas from Srinivas Addagarla <srinivas@cdotd.ernet.in>:
        * read.c (read_a_source_file): After doing an mri_pending_align,
        adjust the line_label if there is one.
        (s_space): Set mri_pending_align if an odd number of bytes were
        output.

Wed Jan 29 15:31:12 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>

        * config/tc-d10v.h (md_do_align): Add this hook to call
        d10v_cleanup() when a ".align" is detected.

        * config/tc-d10v.c (find_opcode): Correctly calculate
        branch displacement when .aligns are present.

Wed Jan 29 09:42:11 1997  Jeffrey A Law  (law@cygnus.com)

        * config/tc-mn10200.c (md_relax_table): Define.
        (md_convert_frag): Implement.
        (md_assemble): Handle relaxable operands/instructions correctly.
        (md_estimate_size_before_relax): Implement.
        * config/tc-mn10200.h (TC_GENERIC_RELAX_TABLE): Define.

Tue Jan 28 15:27:28 1997  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-mips.c (append_insn): Give an error for jumps to a
        misaligned address.
        (md_apply_fix): Make a branch to an odd address an error rather
        than a warning.

        * config/tc-mips.c (md_convert_frag): If the user explicitly
        requested an extended opcode, pass warn as true to mips16_immed.

        * config/tc-mips.c (mips16_ip): Handle a missing expression like
        an explicit 0, so that explicitly extended instructions work
        correctly.

Mon Jan 27 17:41:20 1997  Ian Lance Taylor  <ian@cygnus.com>

        * ecoff.c (ecoff_build_symbols): Don't generate a local ECOFF
        symbol for a common symbol.

Wed Jan 22 10:39:39 1997  Doug Evans  <dje@canuck.cygnus.com>

        Patch presumed to have been checked in awhile ago but wasn't.
        Mon Nov 25 10:45:14 1996  Doug Evans  <dje@seba.cygnus.com>
        * write.c: Delete "ifndef md_relax_frag" around is_dnrange.
        (relax_segment, case rs_org): Move code inside braces.  Move locals
        target,after inside too.
        (relax_segment, case rs_machine_dependent): Guts moved to ...
        (relax_frag): New function.
        Call md_prepare_relax_scan if defined.

Mon Jan 20 10:56:47 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>

        * config/tc-m68k.c (m68k_ip): Reject pc-relative addresses for the
        'p' operand specifier.

Mon Jan 20 10:39:36 1997  J.T. Conklin  <jtc@cygnus.com>

        * config/tc-m68k.c (HAVE_LONG_BRANCH): New macro, returns true for
        m68k family cpus which support long branch addressing modes.
        (m68k_ip, md_convert_frag_1, md_estimate_size_before_relax,
        md_create_long_jump): Use it.

Mon Jan 20 12:42:06 1997  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-mips.c (md_begin): Don't set SEC_ALLOC or SEC_LOAD for
        the .reginfo or .MIPS.options section if configured for an
        embedded target.

        * config/tc-mips.c (md_begin): Don't set interlocks for
        mips_4650.

Wed Jan 15 13:51:50 1997  Ian Lance Taylor  <ian@cygnus.com>

        * read.c (read_a_source_file): Make sure the symbol ends with
        whitespace before checking whether the next character is '='.

Tue Jan 14 15:07:27 1997  Robert Lipe <robertl@dgii.com>

        * config/tc-i386.c (sco_id): Moved from here...
        * config/obj-elf.c (sco_id): ...to here.  Adding the identifier
        really is an SCO ELF specific thing, not just a SCO x86 specific
        thing.

start-sanitize-tic80
Mon Jan 13 22:43:01 1997  Michael Meissner  <meissner@tiktok.cygnus.com>

        * configure.in (tic80-*-*): Don't require 'coff'.
        * configure: Regenerate.

end-sanitize-tic80
Thu Jan  9 09:08:43 1997  Ian Lance Taylor  <ian@cygnus.com>

        * read.c (emit_expr): Check for overflow of a negative value
        correctly.
        * write.c (fixup_segment): Likewise.
        * config/obj-coff.c (fixup_segment): Likewise.

        * config/tc-m68k.c (struct label_line): Define.
        (labels, current_label): New static variables.
        (md_assemble): Mark current_label as text, and clear it.
        (m68k_frob_label): New function.
        (m68k_flush_pending_output): New function.
        (m68k_frob_symbol): New function.
        * config/tc-m68k.h (tc_frob_label): Define.
        (md_flush_pending_output): Define.
        (tc_frob_symbol): Don't warn, just call m68k_frob_symbol.
        (tc_frob_coff_symbol): Likewise.

        * read.c (read_a_source_file): When defining a macro in MRI mode,
        don't add the symbol to the symbol table.

Tue Jan  7 11:21:42 1997  Jeffrey A Law  (law@cygnus.com)

        * config/tc-mn10300.c (tc_gen_reloc): Handle sym1-sym2 fixups
        here since fixup_segment doesn't (linkrelax is set).
        * config/tc-mn10200.c (tc_gen_reloc): Likewise.

Mon Jan  6 15:19:32 1997  Jeffrey A Law  (law@cygnus.com)

        * config/tc-mn10200.c (md_assemble): Tweak fx_offset for pc-relative
        relocs.

Fri Jan  3 16:47:08 1997  Jeffrey A Law  (law@cygnus.com)

        * config/tc-hppa.c (struct hppa_fix_struct): Tweak fx_r_field's type
        to avoid warnings with the native HP compiler.
        (fix_new_hppa): Similarly for the r_type argument.
        (pa_build_unwind_subspace, hppa_elf_mark_end_of_function): Enclose
        in an #if OBJ_ELF to keep gcc -Wall quiet.
        (md_apply_fix): Always initialize "result".

        * config/tc-mn10200.c (md_assemble): Generate relocations.

Fri Jan  3 18:17:23 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>

        * config/tc-m68k.c (s_even): Adjust the alignment of the current
        section.

Fri Jan  3 17:10:33 1997  Richard Henderson  <rth@tamu.edu>

        * config/obj-elf.c (elf_file_symbol): When using ECOFF debugging,
        pass on the new file hook.

        * config/tc-alpha.c (alpha_fix_adjustable): Not quite the same as
        !alpha_force_relocation, as local LITERALs can be adjusted to be
        relative to the section.

Fri Jan  3 12:09:24 1997  Ian Lance Taylor  <ian@cygnus.com>

        * config/obj-coff.c (yank_symbols): If tc_frob_coff_symbol is
        defined, call it.
        * config/tc-m68k.h (tc_frob_symbol): Check whether text label is
        aligned to odd boundary.
        (tc_frob_coff_symbol): Define.

        * doc/as.texinfo (Set): Change parenthesized @xref to @pxref.

        * macro.c (macro_expand_body): In MRI mode, just copy a single &.

        * config/tc-m68k.c (m68k_ip): Call frag_grow before adding a
        PCINDEX frag.  From Ronald F. Guilmette <rfg@monkeys.com>.

        * config/tc-m68k.c (m68k_ip): Accept 'B' as a size for an
        immediate value.
        (md_assemble): If the size is 'B', set fx_signed.
        (md_apply_fix_2): Use fx_signed when checking for overflow.

        * write.h (struct fix): Add fx_signed field.
        * write.c (fix_new_internal): Initialize fx_no_overflow and
        fx_signed fields.
        (fixup_segment): Use fx_signed when checking for overflow.
        * config/obj-coff.c (fixup_segment): Check fx_no_overflow and
        fx_signed when checking for overflow.

Thu Jan  2 13:37:29 1997  Ian Lance Taylor  <ian@cygnus.com>

        * NOTES, NOTES.config: Removed.  These are rarely, if ever,
        updated, and all the useful information is in doc/internals.texi.

        Based on patch from Ronald F. Guilmette <rfg@monkeys.com>:
        * read.c (read_a_source_file): Check for conditional operators
        before doing an MRI pending alignment.
        * config/tc-m68k.h (m68k_conditional_pseudoop): Declare.
        (tc_conditional_pseudop): Define.
        * config/tc-m68k.c (m68k_conditional_pseudop): New function.
        * doc/internals.texi (CPU backend): Describe
        tc_conditional_pseudoop.

        Based on patch from Ronald F. Guilmette <rfg@monkeys.com>:
        * config/tc-m68k.c (m68k_rel32_from_cmdline): New static
        variable.
        (md_begin): Check m68k_rel32_from_cmdline before setting
        m68k_rel32.
        (m68k_mri_mode_change): Likewise.
        (md_longopts): Add --disp-size-default-16 and
        --disp-size-default-32.
        (md_parse_option): Handle new options.
        (md_show_usage): Mention new options.
        * doc/c-m68k.texi (M68K-Opts): Document new options.

        Based on patch from Ronald F. Guilmette <rfg@monkeys.com>:
        * config/tc-m68k.c (m68k_index_width_default): New static
        variable.
        (m68k_ip): Use m68k_index_width_default to set the size of a base
        register whose size was not given.
        (md_longopts): Add --base-size-default-16 and
        --base-size-default-32.
        (md_parse_option): Handle new options.
        (md_show_usage): Mention new options.
        * doc/c-m68k.texi (M68K-Opts): Document new options.

        * doc/c-mips.texi: Mention ISA level 4, and the -mips16 option.

        * configure.in: Recognize mips-*-linux* target.
        * configure: Rebuild.

        * config/tc-mips.c (load_register): Rewrite 64 bit handling to
        work if valueT is only 32 bits.

        * config/tc-mips.c: Throughout, check target_big_endian rather
        than byte_order.
        (byte_order): Remove.
        (mips_init_after_args): Remove.
        * config/tc-mips.h (LITTLE_ENDIAN, BIG_ENDIAN): Don't define.
        (mips_init_after_args): Don't declare.
        (tc_init_after_args): Don't define.

        * config/tc-mips.h (tc_frob_after_relocs): Define if
        OBJ_MAYBE_ELF.
        (mips_elf_final_processing): Likewise.
        (ELF_TC_SPECIAL_SECTIONS): Likewise.

Tue Dec 31 15:12:35 1996  Michael Meissner  <meissner@tiktok.cygnus.com>

        * config/tc-v850.c (md_assemble): If this is sst.{h,w} or
        sld.{h,w} and the operand is relocatable, adjust the adend by
        shifting it right one bit.

Tue Dec 31 12:56:41 1996  Ian Lance Taylor  <ian@cygnus.com>

        * read.c (read_a_source_file): Check mri_pending_align after
        checking for a macro.  From Ronald F. Guilmette
        <rfg@monkeys.com>.

        * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.

        * config/tc-sparc.c (md_apply_fix3): Rename from md_apply_fix, and
        add segment argument.  If OBJ_ELF, treat a relocation against a
        symbol in a linkonce section like a relocation against an external
        symbol.
        * config/tc-sparc.h (MD_APPLY_FIX3): Define.

Mon Dec 30 11:35:40 1996  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-mips.c (mips16_macro): Add case for M_ABS.

Fri Dec 27 22:51:51 1996  Fred Fish  <fnf@cygnus.com>

        * NOTES.config (Implementation): as.h #define's "GAS" not "gas",
        includes config.h instead of host.h, tc.h instead of tp.h, and
        targ-env.h instead of target-environment.h.
        Also, obj-format.h includes targ-cpu.h instead of
        target-processor.h.
start-sanitize-tic80
        * configure.in (case ${generic_target}): Add tic80-*-coff entry.
        * configure: Rebuild with autoconf.
        * config/obj-coff.h (coff/tic80.h): Include if TC_TIC80 defined.
        (TARGET_FORMAT): Define to "coff-tic80".
        * config/tc-tic80.c: New file for TIc80 support.
        * config/tc-tic80.h: New file for TIc80 support.
end-sanitize-tic80
        
Fri Dec 27 11:42:29 1996  Ian Lance Taylor  <ian@cygnus.com>

        * doc/as.texinfo (M): Mention explicitly that -M changes macro
        handling.

Thu Dec 19 12:06:08 1996  Ian Lance Taylor  <ian@cygnus.com>

        * write.c (adjust_reloc_syms): If the fixup symbol has been
        equated to an undefined symbol, convert the fixup to being against
        the target symbol.  Remove obsolete code handling a special case
        for i386 PIC.

Wed Dec 18 22:54:39 1996  Stan Shebs  <shebs@andros.cygnus.com>

        * mpw-make.sed: Use NewFolderRecursive for installation.

Wed Dec 18 16:00:42 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>

        * config/tc-d10v.c (do_assemble): Correct previous bug fix.

Wed Dec 18 15:27:40 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>

        * config/tc-d10v.c (md_assemble): Fix bug which caused
        second instruction in a line to be case sensitize.

Wed Dec 18 10:08:46 1996  Jeffrey A Law  (law@cygnus.com)

        * config/tc-mn10200.c (mn10200_insert_operand): Don't
        range check operands with MN10200_OPERAND_NOCHECK set.
        (check_operand): Likewise.

Tue Dec 17 10:59:32 1996  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-mips.c: Undo part of last Friday's alignment changes.
        (md_begin): Always align the text section to a four byte
        boundary.
        (append_insn): Remove call to record_align.

        * config/tc-mips.c (insn_label): Remove.
        (struct insn_label_list): Define.
        (insn_labels, free_insn_labels): New static variables.
        (mips_clear_insn_labels): New static function.
        (append_insn): Mark all mips16 text labels, and make them odd.
        Handle all labels after emitting a nop, not just one.  Call
        mips_clear_insn_labels rather than just clearing insn_label.
        (mips_emit_delays): Add insns parameter, and use it to decide
        whether to mark mips16 labels.  Handle all labels, not just one.
        Force mips16 labels to be odd.  Change all callers.
        (mips16_immed): Don't check for an odd branch target.
        (md_apply_fix): Don't check mips16 mode for a branch reloc.
        (mips16_extended_frag): Ignore the low bit in a branch target.
        (md_convert_frag): Likewise.
        (mips_no_prev_insn): Call mips_clear_insn_labels rather than just
        clearing insn_label.
        (mips_align, mips_flush_pending_output, s_cons): Likewise.
        (s_float_cons, s_gpword): Likewise.
        (s_align): Use insn_labels rather than insn_label.
        (s_cons, s_float_cons, s_gpword): Likewise.
        (mips_frob_file_after_relocs): New function.
        (mips_define_label): Rewrite to add to insn_labels list.
        * config/tc-mips.h (tc_frob_file_after_relocs): Define.
        * ecoff.c (ecoff_build_symbols): If the size of a function comes
        out odd, increment it.

        * config/tc-mips.c (append_insn): Only update prev_insn when not
        reordering if place is NULL.

        * config/tc-mips.c (mips16_ip): Check for a missing expression
        when using the register indirect addressing mode.

Mon Dec 16 10:08:46 1996  Jeffrey A Law  (law@cygnus.com)

        * config/tc-mn10200.c (mn10200_insert_operand): Don't
        check 24bit operands for overflow.
        (check_operand): Likewise.

Mon Dec 16 11:50:40 1996  Ian Lance Taylor  <ian@cygnus.com>

        * doc/as.texinfo (Section): Document how to use the .section
        pseudo-op for COFF and ELF.

Sun Dec 15 15:26:37 1996  Ian Lance Taylor  <ian@cygnus.com>

        * write.c (adjust_reloc_syms): Fix linkonce check for ELF.

Sat Dec 14 22:37:27 1996  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-mips.c (prev_insn_reloc_type): New static variable.
        (RELAX_MIPS16_ENCODE): Add dslot and jal_dslot arguments, and
        store them.  Adjust other RELAX_MIPS16 macros.
        (RELAX_MIPS16_DSLOT): Define.
        (RELAX_MIPS16_JAL_DSLOT): Define.
        (append_insn): Pass new arguments to RELAX_MIPS16_ENCODE.  Correct
        handling of whether previous instruction has a fixup.  Set
        prev_insn_reloc_type.
        (mips_no_prev_insn): Clear prev_insn_reloc_type.
        (mips16_extended_frag): Use the right base address for a PC
        relative add or load.
        (md_convert_frag): Likewise.  If a PC relative add or load is
        used, record the alignment for the section.

Fri Dec 13 13:00:33 1996  Ian Lance Taylor  <ian@cygnus.com>

        * write.c (adjust_reloc_syms): Don't reduce a reloc against a
        linkonce section into a reloc against the section symbol.

        * config/tc-mips.c (mips16_macro): Remove nop instructions after
        branch instructions.

        * config/tc-mips.c (md_begin): If configured for an embedded ELF
        system, don't set the section alignment to 2**4.
        (s_change_sec): Likewise.
        (append_insn): Call record_alignment for the section.
        (md_section_align): Don't align the section size for an embedded
        ELF system.

Thu Dec 12 16:40:47 1996  Ian Lance Taylor  <ian@cygnus.com>

        * write.c (adjust_reloc_syms): Make sure that symbols are
        resolved; expression symbols may have been skipped.
        * config/obj-coff.c (fixup_segment): Likewise.

Thu Dec 12 15:18:21 1996  Michael Meissner  <meissner@tiktok.cygnus.com>

        * config/tc-ppc.c (ppc_elf_suffix): Move @plt to
        BFD_RELOC_24_PLT_PCREL relocation.
        (md_apply_fix3): Support BFD_RELOC_24_PLT_PCREL.

Tue Dec 10 13:51:55 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>

        * config/tc-d10v.c (write_2_short): Remove code that called
        parallel_ok() when the programmer specified parallel instructions.

Tue Dec 10 12:23:19 1996  Jeffrey A Law  (law@cygnus.com)

        * config/tc-mn10300.c (md_assemble): Update to handle endianness
        issues correctly.

        * config/tc-mn10200.c (md_assemble): Opcode 0x0 is valid!
        * config/tc-mn10300.c (md_assemble): Likewise.

Tue Dec 10 11:37:14 1996  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-mips.c (append_insn): Make sure there is enough room
        in a frag after a mips16 instruction to switch it with a jump
        instruction.

        * config/tc-mips.c (mips16_extended_frag): Give an error for an
        attempt to use a non absolute symbol in an extending frag.

Mon Dec  9 16:48:20 1996  Jeffrey A Law  (law@cygnus.com)

        * config/tc-mn10200.c: Flesh out assembler support for MN10200.
        * config/tc-mn10200.h: Likewise.

Mon Dec  9 17:09:42 1996  Ian Lance Taylor  <ian@cygnus.com>

        * app.c (do_scrub_chars): At the end of a C comment, pass space to
        UNGET rather than PUT.  Set old_state before setting state to -2.

        * config/tc-mips.c (mips16_extended_frag): Avoid an infinite loop
        when extending because the value is exactly maxtiny + 1.

        * config/tc-mips.c (RELAX_MIPS16_ENCODE): Add small and ext
        arguments, and store them.  Adjust other RELAX_MIPS16 macros.
        (RELAX_MIPS16_USER_SMALL): Define.
        (RELAX_MIPS16_USER_EXT): Define.
        (mips16_small, mips16_ext): New static variables.
        (append_insn): Pass mips16_small and mips16_ext to
        RELAX_MIPS16_ENCODE.
        (mips16_ip): Set mips16_small and mips16_ext.
        (mips16_immed): Don't check mips16_autoextend.
        (mips16_extended_frag): Check USER_SMALL and USER_EXT.

        * write.c (write_relocs): Print an error for an out of range
        fixup, rather than calling abort.

        * as.c (main): Unlink the output file if there are errors while
        generating the fixups.

Fri Dec  6 18:48:13 1996  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-mips.c (mips16_extended_frag): Don't call
        S_GET_VALUE.
        (md_convert_frag): Call resolve_symbol_value before calling
        S_GET_VALUE, and don't add in the frag address.

        * config/tc-mips.c (mips16_immed): Add file and line parameters,
        and use them when reporting errors.  Change all callers.

Fri Dec  6 15:36:32 1996  Jeffrey A Law  (law@cygnus.com)

        * config/tc-mn10300.c: Fix various gcc -Wall warnings.
        Remove '$' prefixing for registers.

Fri Dec  6 00:55:48 1996  Martin  <hunt@cygnus.com>

        * config/tc-d10v.c (md_assemble): Check to see if prev_seg
        is initialized before using it.
        (d10v_cleanup): No longer uses its argument, so make it void.

        * config/tc-d10v.h (d10v_cleanup): Change prototype.
        
Thu Dec  5 11:03:31 1996  Ian Lance Taylor  <ian@cygnus.com>

        * write.c (fixup_segment): Don't discard the symbol for a PC
        relative fixup to an absolute symbol.

Wed Dec  4 15:42:41 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>

        * config/tc-d10v.c (md_assemble, d10v_cleanup): Fix bug
        with multiple sections.

Wed Dec  4 13:00:07 1996  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-mips.c (md_longopts): Rename mips-16 to mips16, and
        no-mips-16 to no-mips16.
        (s_mipsset): Accept .set mips16 and .set nomips16.

Wed Dec  4 10:35:33 1996  Michael Meissner  <meissner@tiktok.cygnus.com>

        * config/tc-ppc.c (ppc_elf_suffix): Take expressionS pointer
        argument, and check for +/- constant following the suffix, folding
        it into the expression.
        (ppc_elf_cons): Change ppc_elf_suffix calls.
        (md_assemble): Ditto.
        (shlib): Replace boolean mrelocatable with enumeration shlib.
        (md_parse_option): Discriminate between PIC style shared libraries
        and -mrelocatable.
        (ppc_elf_validate_fix): Don't report warnings for PIC style shared
        libraries.

Tue Dec  3 23:18:29 1996  Michael Meissner  <meissner@tiktok.cygnus.com>

        * config/tc-ppc.h ({tc,ppc}_comment_chars): Define, so that we can
        change the comment characters.

        * config/tc-ppc.c (comment_chars): Delete in favor of
        tc_comment_chars.
        (ppc_{eabi,solaris}_comment_chars): Eabi and Solaris versions of
        comment chars.
        (ppc_comment_chars): Select appropriate comment chars by default.
        (msolaris): New flag for -m{,no-}solaris.
        (md_parse_option): Recognize -K pic.  Add support for
        -m{,no-}solaris.
        (md_show_usage): Update.
        (md_begin): Do not set ELF flags if Solaris.
        (ppc_elf_suffix): @local sets R_PPC_LOCAL24PC relocation.
        (md_apply_fix3): Add support for R_PPC_LOCAL24PC.

Mon Dec  2 13:48:57 1996  Ian Lance Taylor  <ian@cygnus.com>

        * as.c (main): Correct handling of flag_always_generate_output.

Sun Dec  1 21:46:05 1996  Jeffrey A Law  (law@cygnus.com)

        * config/tc-mn10300.c (tc_gen_reloc): Get the addend from
        fx_offset, not fx_addnumber.

        * config/tc-mn10300.h (tc_fix_adjustable): Don't do any
        reloc adjustments.

Sat Nov 30 17:34:48 1996  Eliot Dresselhaus  <eliot@wally.edc.com>

        * config/tc-i386.c: Correct misspelling: balenced to balanced.

Wed Nov 27 13:25:39 1996  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-mips.c (md_section_align): Check for an alignment of
        4, not an alignment of 16.  Corrects August 7 patch.

Tue Nov 26 10:33:16 1996  Ian Lance Taylor  <ian@cygnus.com>

        * configure, conf.in: Rebuild with autoconf 2.12.

        * config/tc-ppc.c (ppc_elf_lcomm): Don't give an error if no
        alignment is specified.

        Add support for mips16 (16 bit MIPS implementation):
        * config/tc-mips.c: Extensive additions for mips16 support, not
        listed here.
        (RELAX_OLD, RELAX_NEW): Use only 7 bits each.
        (insn_uses_reg): Change last parameter to an enum.
        * config/tc-mips.h (LOCAL_LABELS_DOLLAR): Define as 0.
        (md_relax_frag): Define as mips_relax_frag.
        (mips_relax_frag): Declare.
        (struct mips_cl_insn): Add use_extend and extend fields.
        (tc_fix_adjustable): Define.
        * config/obj-elf.h (S_GET_OTHER): Define.
        (S_SET_OTHER): Define.

Mon Nov 25 18:02:29 1996  J.T. Conklin  <jtc@beauty.cygnus.com>

        * config/tc-m68k.c (m68k_ip): Implement cases for new <, >, m, n,
        o and p operand specifiers.

Mon Nov 25 10:45:14 1996  Doug Evans  <dje@seba.cygnus.com>

        * write.c: Delete "ifndef md_relax_frag" around is_dnrange.
        (relax_segment, case rs_org): Move code inside braces.  Move locals
        target,after inside too.
        (relax_segment, case rs_machine_dependent): Guts moved to ...
        (relax_frag): New function.
        Call md_prepare_relax_scan if defined.
        * config/tc-m68k.h (md_prepare_relax_scan): Renamed from
        M68K_AIM_KLUDGE.

Mon Nov 25 08:49:36 1996  Jeffrey A Law  (law@cygnus.com)

        * config/tc-mn10300.c (address_registers): Use '$' as register
        prefix instead of '%'.
        (data_registers, other_registers, md_assemble): Likewise.

        * config/tc-mn10300.c (address_registers): Use '%' prefix for regs.
        (data_registers, other_registers, md_assemble): Likewise.

        * config/tc-mn10300.c (md_assemble): Correctly determine the
        correct location and type for each relocation.
        (md_pcrel_from): Simplify.

Fri Nov 22 15:42:26 1996  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-sh.c (md_convert_frag): Improve warning when branch is
        converted into branch around branch.

Thu Nov 21 11:56:11 1996  Jeffrey A Law  (law@cygnus.com)

        * config/tc-mn10300.h (DIFF_EXPR_OK): Don't define this.
        (tc_fix_adjustable): Don't adjust relocs against weak symbols or 
        pc-relative relocs.
        * config/tc-mn10300.c (md_begin): Set linkrelax.
        (md_assemble): Create fixups as needed.
        (md_apply_fix3): Gut.  It shouldn't ever get called anymore.

Tue Nov 19 17:48:06 1996  Michael Meissner  <meissner@tiktok.cygnus.com>

        * config/tc-d10v.c (parallel_ok): When automatically converting
        serial ops to parallel, do not consider a branch as the first
        instruction.

Tue Nov 19 13:35:22 1996  Jeffrey A Law  (law@cygnus.com)

        * config/tc-mn10300.c (md_assemble): Handle MN10300_OPERAND_REG_LIST.

Mon Nov 18 15:26:55 1996  Jeffrey A Law  (law@cygnus.com)

        * config/tc-mn10300.c (mn10300_insert_operand): Provide prototype
        via PARAMS.
        (check_operand): Likewise.

Mon Nov 18 15:22:28 1996  Michael Meissner  <meissner@tiktok.cygnus.com>

        * config/tc-d10v.c (parallel_ok): Branch and link instructions
        modify r13.
        (write_2_short): Call parallel_ok to check whether two short
        instructions the user requested execute in parallel, can be
        executed that way.

Thu Nov 14 11:17:49 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>

        * config/tc-d10v.c (write_2_short): Fix bug that wouldn't
        allow a branch and link in parallel with an exe instruction.

Fri Nov  8 13:55:03 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>

        * doc/c-d10v.texi: Add info on @word modifier.

Wed Nov  6 13:46:07 1996  Jeffrey A Law  (law@cygnus.com)
        
        * config/tc-mn10300.c (mn10300_insert_operand): MN10300_OPERAND_SPLIT
        operands are assumed to be 32bits.  Use "bits" field to hold the
        number of bits in the main instruction word for MN10300_OPERAND_SPLIT.
        (mn10300_check_operand): MN10300_OPERAND_SPLIT operands are assumed
        to be 32bits.

        * config/tc-mn10300.c (mn10300_insert_operand): Shift low part
        of a MN10300_OPERAND_SPLIT operand by operand->shift.

        * config/tc-mn10300.c (mn10300_insert_operand): Handle
        MN10300_OPERAND_SPLIT.

Tue Nov  5 13:30:40 1996  Jeffrey A Law  (law@cygnus.com)

        * config/tc-mn10300.c (md_assemble): Insert operands into
        the extension part of the instruction if necessary.
        (mn10300_insert_operand): Accept pointer to extension word
        argument.  Make insn a pointer argument too.  Return type
        is now void.  All callers changed.

Mon Nov  4 12:53:40 1996  Jeffrey A Law  (law@cygnus.com)

        * config/tc-mn10300.c (mn10300_insert_operand): Handle
        repeated register operands.

Fri Nov  1 10:42:49 1996  Ian Lance Taylor  <ian@cygnus.com>

        * doc/as.texinfo: Added section on reporting bugs.

        * config/tc-alpha.c: Change uses of void * to PTR.  Change the
        alpha_macro emit field to expect a const argument, and change the
        arg field to be const.  Fix some spacing to follow the GNU
        standard.

Fri Nov  1 10:32:03 1996  Richard Henderson  <rth@tamu.edu>

        * config/tc-alpha.c (md_parse_option): Add knowledge of 21164pc
        (pca56) and 21264 (ev6) cpus.
        (md_apply_fix): Private relocation types are now negative.
        (alpha_force_relocation): Likewise.
        (tc_gen_reloc): Likewise.
        (emit_insn): Likewise.
        (emit_ldXu): Do the right thing when the hardware can do byte insns.
        (emit_stX): Likewise.
        (emit_sextX): Likewise.

Thu Oct 31 16:33:21 1996  Ian Lance Taylor  <ian@cygnus.com>

        * config/obj-coff.c (do_relocs_for): Call resolve_symbol_value on
        a symbol found in a reloc.

        * symbols.c (resolve_symbol_value): Improve the error message if
        an undefined symbol is used in an expression.

Wed Oct 30 20:15:35 1996  Ian Lance Taylor  <ian@cygnus.com>

        * doc/internals.texi: Rewrite, and add a lot of documentation.
        * doc/Makefile.in (internals.info): New target.

Wed Oct 30 14:55:57 1996  Jeffrey A Law  (law@cygnus.com)

        * config/tc-v850.h (tc_fix_adjustable): Don't adjust relocs
        against weak symbols.

Tue Oct 29 12:28:16 1996  Jeffrey A Law  (law@cygnus.com)

        * config/tc-v850.c (md_assemble): Don't lose for relaxable
        addresses like .+6.

        * config/tc-v850.c (md_convert_frag): Make sure we insert the
        fixup at the right address within the frag.

        * config/tc-v850.c (md_convert_frag): Don't set fragP->fr_fix
        to an absolute value, instead increment it as needed.

        * config/tc-v850.h (TC_GENERIC_RELAX_TABLE): Define.
        * config/tc-v850.c: Fix some indention problems.
        (md_relax_table): Define for D9->D99 branch displacement
        relaxing.
        (md_convert_frag): Do something useful instead of aborting.
        (md_estimate_size_before_relax): Likewise.
        (md_assemble): Note if the matching instruction has a relaxable
        operand.  If it does, allocate frag with frag_var and don't
        do any fixups.

Mon Oct 28 10:48:40 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>

        * config/tc-d10v.h (md_cleanup): New function.  This is needed to
        write out any buffered instructions when a ".end" is found.

Mon Oct 28 10:43:45 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>

        * read.c (read_a_source_file): New hook md_cleanup().

Fri Oct 25 00:01:00 1996  Ian Lance Taylor  <ian@cygnus.com>

        * write.c (fix_new_exp): Use make_expr_symbol to build an
        expression symbol for a complex fixup.

Thu Oct 24 14:31:04 1996  Jeffrey A Law  (law@cygnus.com)

        * config/tc-v850.c (v850_reloc_prefix): Several disgusting
        hacks to improve parsing of complex hi, lo, zda, etc
        expressions.
        (md_assemble): Don't demand and eat a trailing ')' after finding
        a v850 relocation prefix.  Sign extend the constant in a
        BFD_RELOC_LO16 expression.  Do eat a trailing ')' after a complete
        operand.
        (parse_cons_expression_v850): Don't eat a trailing ')' after
        finding a v850 relocation prefix.

        * config/tc-v850.h (TC_PARSE_CONS_EXPRESSION): Define.
        (TC_CONS_FIX_NEW): Likewise.
        * config/tc-v850.c (parse_cons_expression_v850): New function.
        (cons_fix_new_v850): Likewise.

        * config/tc-v850.h (tc_fix_adjustable): Don't adjust TDA relocs.

Wed Oct 23 18:20:29 1996  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-ppc.c (md_apply_fix3): Give a better warning message
        for an unknown relocation type.

Wed Oct 23 16:21:28 1996  Jeffrey A Law  (law@cygnus.com)

        * config/tc-v850.c (md_pseudo_table): Add .word; allocates
        4 bytes of space.

Tue Oct 22 22:01:25 1996  Jeffrey A Law  (law@cygnus.com)

        * config/tc-v850.c (md_assemble): Handle TDAOFF relocs
        differently for movea & sst/sld insns.

Tue Oct 22 17:09:32 1996  Michael Meissner  <meissner@tiktok.cygnus.com>

        * config/tc-d10v.c (parallel_ok): Don't allow illegal combinations
        of instructions.

Tue Oct 22 11:28:39 1996  Ian Lance Taylor  <ian@cygnus.com>

        * obj.h (struct format_ops): Add frob_file_after_relocs field.
        * config/obj-multi.h (obj_frob_file_after_relocs): Define.
        * config/obj-ecoff.c (ecoff_format_ops): Initialize new
        frob_file_after_relocs field.
        * config/obj-elf.c (elf_format_ops): Likewise.
        * config/tc-mips.c: Undefine obj_frob_file_after_relocs before
        including obj-elf.h.

Mon Oct 21 11:38:30 1996  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-mips.c (cons_fix_new_mips): Only treat 8 byte reloc
        specially if not ELF.
        (md_apply_fix): Handle BFD_RELOC_64.
        (tc_gen_reloc): Handle BFD_RELOC_64.

        * config/tc-i386.c (md_apply_fix3): Don't increment value for a PC
        relative reloc when BFD_ASSEMBLER and OBJ_AOUT (more ugly gas
        reloc hacking).

        * config/obj-aout.h (S_IS_DEFINE): non BFD_ASSEMBLER version:
        Don't check S_GET_OTHER.

Fri Oct 18 14:06:26 1996  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-mips.c (mips_ip): Accept an odd floating point
        register with l.s or s.s.

        * config/obj-aout.c (obj_pseudo_table): Use obj_aout_type for
        .type pseudo-op.
        (obj_aout_type): New static function.

Thu Oct 17 17:55:17 1996  Ian Lance Taylor  <ian@cygnus.com>

        * Makefile.in ($(OBJS)): Depend upon libiberty.h.

Wed Oct 16 11:28:31 1996  Jeffrey A Law  (law@cygnus.com)

        * config/tc-v850.c (v850_reloc_prefix): Recognize zdaoff, tdaoff
        and sdaoff expressions.

        * write.c (fixup_segment): Don't add symbol value to addend if
        TC_V850 and OBJ_ELF.
        * config/tc-v850.h (tc_fix_adjustable): Don't adjust any
        pc-relative fixups.

        * config/tc-v850.c (md_pcrel_from): Undo yesterday's changes.
        (md_pcrel_from_section): Likewise.
        * config/tc-v850.h (MD_PCREL_FROM_SECTION): Likewise.

Tue Oct 15 23:19:00 1996  Jeffrey A Law  (law@cygnus.com)

        * config/tc-v850.c (md_pcrel_from): Delete unused function.
        (md_pcrel_from_section): New function.
        * config/tc-v850.h (MD_PCREL_FROM_SECTION): Define.

Mon Oct 14 13:59:12 1996  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-mips.c (load_register): Add cast to offsetT when using
        a constant with &~.

Mon Oct 14 11:24:28 1996  Richard Henderson  <rth@tamu.edu>

        * config/obj-elf.c (elf_frob_file): Move ECOFF debug processing to ...
        (elf_frob_file_after_relocs): ... here.  New function.
        * config/obj-elf.h (obj_from_file_after_relocs): New macro.
        * write.c (write_object_file): Call *frob_after_relocs after the
        call to write_relocs.

        * config/tc-alpha.c: Use new BFD_RELOC_ALPHA_ELF_LITERAL reloc.

        * config/tc-alpha.c (load_expression): Don't SET_VALUE on the section
        symbol, as this messes up linking.  Instead, expand the recursive call
        inline and change up the appropriate bits to get the 0x8000 offset
        in the reloc addend.

Thu Oct 10 17:30:31 1996  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-sparc.h (tc_fix_adjustable): Permit the difference of
        two symbols in the same segment to be adjusted.

        * configure.in: Don't get confused by CPU-VENDOR-linux-gnu.
        * configure: Rebuild.

Thu Oct 10 17:22:18 1996  Michael Meissner  <meissner@tiktok.cygnus.com>

        * config/tc-ppc.c (ppc_insert_operand): Change most warnings into
        errors.
        (ppc_elf_validate_fix): Ditto.
        (md_assemble): Ditto.
        (ppc_tc): Ditto.
        (ppc_pe_section): Ditto.
        (ppc_frob_symbol): Ditto.

Thu Oct 10 12:05:45 1996  Jeffrey A Law  (law@cygnus.com)

        * config/mn10300.c (md_assemble): Pass an extra shift count
        to mn10300_insert_operand based on the opcode format.
        (mn10300_insert_operand): Accept and use extra shift count
        parameter.

        * config/tc-mn10300.c (md_assemble): Use FMT_* macros for
        formats rather than hard-coded constants.

        * config/tc-mn10300.c (md_assemble): Format D5 instructions
        are 7 bytes long.  Write out instructions in big-endian format.

Tue Oct  8 14:56:15 1996  Jeffrey A Law  (law@cygnus.com)

        * config/tc-mn10300.c (md_assemble): Tweak further so
        that all instructions are parsed correctly.

Tue Oct  8 13:02:21 1996  Ian Lance Taylor  <ian@cygnus.com>

        * as.h: Include libiberty.h.
        (xmalloc, xrealloc): Don't declare.
        * as.c: Don't include libiberty.h.
        * expr.c, read.c, stabs.c, config/obj-coff.c: Likewise.
        * config/tc-mips.c: Likewise.
        * messages.c: Likewise.
        (xstrerror): Don't declare.
        * xmalloc.c: Remove.

Mon Oct  7 16:53:23 1996  Jeffrey A Law  (law@cygnus.com)

        * config/tc-mn10300.h (pre_defined_registers) Remove.
        (system_registers, cc_names): Likewise.
        (address_registers, data_registers, other_registers): New register
        arrays.
        (register_name, system_register_name, cc_name): Remove.
        (mn10300_reloc_prefix): Likewise.
        (data_register_name): New function.
        (address_register_name, other_register_name): Likewise.
        (md_assemble): Rough cut at parsing operands.  Remove lots of
        unwanted code.
        (md_apply_fix3): Disable for now.

Mon Oct  7 11:38:34 1996  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>

        * config/tc-m68k.c (select_control_regs): New function, extracted
        out of m68k_init_after_args.
        (m68k_init_after_args): Use it.
        (mri_chip): Use it here as well to update set of allowed control
        regs for movec.

Mon Oct  7 11:24:29 1996  Ian Lance Taylor  <ian@cygnus.com>

        * config/obj-elf.c (elf_begin): New function.
        (obj_elf_section): Add the section symbol to the symbol table.
        * config/obj-elf.h (obj_begin): Define.
        (elf_begin): Declare.
        * as.c (perform_an_assembly_pass): Call obj_begin if it is
        defined.

Fri Oct  4 18:37:32 1996  Ian Lance Taylor  <ian@cygnus.com>

        * config/obj-coff.c (fixup_segment): Subtract the section address
        from a PC relative reloc if TC_M68K.

Thu Oct  3 15:15:30 1996  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-sparc.c (md_pseudo_table): Make .uahalf, .uaword, and
        .uaxword available even if not OBJ_ELF.
        (md_atof): Remove unused local variable wordP.

Thu Oct  3 00:16:50 1996  Jeffrey A Law  (law@cygnus.com)

        * config/tc-mn10x00.c, config/tc-mn10x00.h: New files
        for Matsushita MN10x00 support.
        * configure.in: Recognize mn10x00-*-*
        * configure: Rebuilt.

Wed Oct  2 15:54:03 1996  Klaus Kaempf  <kkaempf@progis.de>

        * obj-evax.h: move openvms definitions from here to tc-alpha.c.
        * tc-alpha.c: add support for vms_case_hack like in vax/vms.
        (load_expression): track clobbering of base reg before jmp/jsr.
        (s_alpha_file): pass case_hack flags and source filename via
        symbol table to bfd.
        * tc-alpha.h (TC_CONS_FIX_NEW): define

Tue Oct  1 16:16:01 1996  Joel Sherrill  <joel@oarcorp.com>

        * configure.in (mips-*-rtems*): New target, like mips-*-elf*.
        * configure: Rebuild.

Tue Oct  1 12:37:48 1996  Ian Lance Taylor  <ian@cygnus.com>

        * read.c (s_macro): Warn if a macro has the same name as a
        pseudo-op.
        (s_space): In m68k MRI mode, align to a word boundary.
        * macro.c (define_macro): Add namep parameter.  Change all
        callers.
        * macro.h (define_macro): Update declaration.

        * as.c (show_usage): Print bug report address.
        (parse_args): Change version printing to match current GNU
        standards.
        * gasp.c (show_usage): Print bug report address.
        (main): Change version printing to match current GNU standards.

        * config/tc-m68k.c (init_table): Correct access control unit
        register numbers.  From Ken Rose <rose@netcom.com>.

        * config/tc-alpha.c: Add some static function prototypes.
        (alpha_macros): Move to top of file.  Make static.
        (alpha_num_macros): Move to top of file.

Tue Oct  1 09:36:19 1996  Stu Grossman  (grossman@critters.cygnus.com)

        * tc-v850.h:  Define LOCAL_LABEL to recognise _.L_* symbols
        generated by DWARF.

Sat Sep 28 03:38:08 1996  Ian Lance Taylor  <ian@cygnus.com>

        * listing.c (list_symbol_table): Remove bogus code in BFD64 case,
        and just call sprintf_vma.

Thu Sep 26 16:04:11 1996  Ian Lance Taylor  <ian@cygnus.com>

        * expr.c (expr): Change >>= to >> (fix typo).  (From meissner).

Tue Sep 24 19:05:08 1996  Ian Lance Taylor  <ian@cygnus.com>

        * read.c (float_cons): Call md_flush_pending_output if it is
        defined.

Tue Sep 24 12:22:18 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>

        * config/tc-d10v.c (md_operand): Created.  Allows operands to 
        start with '#'.
        * config/tc-d10v.h (md_operand): Undefined.

Mon Sep 23 12:13:18 1996  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-m68k.c (add_fix): Treat a width of '3' like 'B'.
        (md_assemble): A fixup width of '3' means a 1 byte reloc.

Thu Sep 19 12:21:24 1996  Ian Lance Taylor  <ian@cygnus.com>

        * config/obj-coff.c (fixup_segment): Don't adjust PC relative
        reloc for the i960 for a reloc in the same section.  This undoes
        one of the two changes made Aug 19.

Wed Sep 18 12:11:58 1996  Ian Lance Taylor  <ian@cygnus.com>

        * config/obj-coff.c (obj_coff_endef): Both versions: Move C_STAT
        symbols to the position of the debugging information.

Mon Sep 16 11:41:40 1996  Ian Lance Taylor  <ian@cygnus.com>

        * expr.c (expr): Always use unsigned right shifts for >>.

Thu Sep 12 10:25:45 1996  James G. Smith  <jsmith@cygnus.co.uk>

        * config/tc-arm.c (md_apply_fix3): Update two thumb instruction
        slots when processing BL fixups.

        * config/tc-arm.c (output_inst): Ensure Thumb BL fixup is marked
        on the first half of the instruction.

Wed Sep 11 00:09:35 1996  Ian Lance Taylor  <ian@cygnus.com>

        * ecoff.c (ecoff_stab): Create an expression symbol for a complex
        stabs expression, rather than giving an error.

        * ecoff.c (ecoff_new_file): Don't do anything if we are still in
        the same file.

Tue Sep 10 11:45:37 1996  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-mips.c (append_insn): Fill in the value for a constant
        jump, rather than creating a reloc.

Mon Sep  9 10:57:42 1996  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-mips.c (append_insn): Don't swap an instruction which
        sets a condition code with an instruction which uses a condition
        code.
        (mips_ip): In cases 'N' and 'M', look for $fccN rather than an
        immediate value.

        * config/tc-mips.c (md_begin): Recognize r5000 for cpu.
        (mips_ip): Give a better error message if the ISA level is wrong.
        (md_parse_option): Recognize -mcpu=[v][r]5000.

Sat Sep  7 13:25:55 1996  James G. Smith  <jsmith@cygnus.co.uk>

        * config/tc-mips.c (COUNT_TOP_ZEROES): Added macro to count
        leading zeroes.
        (load_register): Ensure hi32 bits are not lost during lo32bit
        processing. Fix shift offset that was overflowing into the next
        instruction field. Add code to generate shorter sequences for
        constants with a single contiguous seqeuence of ones.

Fri Sep  6 17:07:12 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>

        * config/tc-d10v.c (d10v_dot_word): New function to support
        "@word" with the word pseudo-op.
        (md_apply_fix3): Cleanup and changes to support correct sizes
        for 16 and 18-bit relocs.

Fri Sep  6 16:00:29 1996  Doug Evans  <dje@canuck.cygnus.com>

        * configure.in (sparc-*-aout): Set `em'.
        * configure: Regenerated.
        * config/te-sparcaout.h: New file.
        * config/tc-sparc.h (TARGET_BYTES_BIG_ENDIAN): Define.
        Ifdef TE_SPARCOUT define TARGET_FORMAT and SPARC_BIENDIAN.
        * config/tc-sparc.c (INSN_BIG_ENDIAN): New macro.
        (SPECIAL_CASE_{SETSW,SETX}): Define.
        ({NOP,OR,FMOVS,SETHI,SLLX,SRA}_INSN): Define.
        (md_begin): Delete setting of `target_big_endian'.
        (output_insn): New function.
        (md_assemble): Rewrite.  Add `setx' support.
        (sparc_ip): Handle `0' operand char.  Recognize setuw, setsw, setx
        special cases.
        (md_atof): Add little endian support.
        (md_number_to_chars): Likewise.
        (md_apply_fix): Likewise.
        (md_longopts): Recognize -EL,-EB ifdef SPARC_BIENDIAN.
        (md_parse_option): Likewise.
        (md_show_usage): Print -EL, -EB ifdef SPARC_BIENDIAN.

Thu Sep  5 13:40:29 1996  Ian Lance Taylor  <ian@cygnus.com>

        * ecoff.c (ecoff_new_file): New function.
        * ecoff.h (ecoff_new_file): Declare.
        * config/obj-ecoff.h (obj_app_file): Define.

Thu Sep  5 13:39:25 1996  Richard Henderson  <rth@tamu.edu>

        * config/tc-alpha.c (load_expression): Bias the .lit8 section
        symbol by 32k so that our 16-bit signed offset can address the
        entire chunk.  Reported by <matt@lkg.dec.com>.

Wed Sep  4 10:23:20 1996  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-mips.c (load_register): Remove unused variable tmp.

Wed Sep  4 11:24:29 1996  James G. Smith  <jsmith@cygnus.co.uk>

        * config/tc-mips.c (load_register): Remove unnecessary code that
        was causing the high 32bits of 64bit constants to be lost.
        
Tue Sep  3 13:52:56 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>

        * config/tc-d10v.c: Added changes to support function
        pointers and "@word" syntax.

Tue Sep  3 11:57:18 1996  Jeffrey A Law  (law@cygnus.com)

        * config/tc-v850.c: Remove commented out and #if 0'd code.
        (v850_reloc_prefix): Provide prototype.
        (postfix, get_reloc, build_insn): Remove prototypes for nonexistant
        functions.
        (md_begin, md_assemble, md_apply_fix3): Remove unused variables.
        (md_assemble): Add default to case statement.

Sat Aug 31 16:03:00 1996  Jeffrey A Law  (law@cygnus.com)

        * config/tc-v850.c (md_assemble): Compute size of the instrction
        from the opcode.

        * config/tc-v850.c (md_apply_fix3): Do simple byte, short and
        word fixups too.

Fri Aug 30 23:50:08 1996  Jeffrey A Law  (law@cygnus.com)

        * config/tc-v850.c (md_apply_fix3): Use little endian get/put
        routines to fetch/store the updated instruction from/to memory.
        (v850_insert_operand): If the operand has a specialized insert
        routine, call it.

Fri Aug 30 18:35:26 1996  J.T. Conklin  <jtc@hippo.cygnus.com>

        * config/tc-v850.c (reg_name_search): Align calling convention to
        be like identical function found in tc-ppc.c.
        (get_reloc): Removed.
        (v850_reloc_prefix): New function, parse lo(), hi() and hi0().
        (md_assemble): emit fixups.
        (md_pcrel_from): renamed from md_pcrel_from_section, emit proper
        displacement.
        (md_apply_fix3): handle fixups/relocs.
        * config/tc-v850.h (MD_PCREL_FROM_SECTION): Removed definition.
        
Fri Aug 30 18:12:00 1996  Ian Lance Taylor  <ian@cygnus.com>

        Add SH ELF support.
        * configure.in (sh-*-elf*): New target.
        * config/tc-sh.h (TARGET_ARCH): Define.
        (WORKING_DOT_WORD): Define.
        (TC_COFF_FIX2RTYPE): Only define if OBJ_COFF.
        (BFD_ARCH, COFF_MAGIC, TC_COUNT_RELOC): Likewise.
        (TC_RELOC_MANGLE, tc_coff_symbol_emit_hook): Likewise.
        (DO_NOT_STRIP, NEED_FX_R_TYPE, TC_KEEP_FX_OFFSET): Likewise.
        (TC_COFF_SIZEMACHDEP, tc_frob_file): Likewise.
        (SUB_SEGMENT_ALIGN): Likewise.
        (RELOC_32): Don't define.
        (tc_frob_file_before_adjust): Define if BFD_ASSEMBLER.
        (target_big_endian): Declare if OBJ_ELF.
        (TARGET_FORMAT): Define if OBJ_ELF.
        * config/tc-sh.c: Use BFD reloc codes instead of SH COFF reloc
        numbers throughout.
        (tc_crawl_symbol_chain): Only define if OBJ_COFF.
        (tc_headers_hook, tc_coff_sizemachdep): Likewise.
        (struct sh_count_relocs): Define.
        (sh_count_relocs): New static function, broken out of
        sh_frob_file.  Add BFD_ASSEMBLER code.
        (sh_frob_section): Likewise.
        (sh_frob_file): Call sh_frob_section.
        (md_convert_frag): If BFD_ASSEMBLER, change type of headers, and
        call section_symbol rather than seg_info (seg)->dot.
        (md_section_align): Add OBJ_ELF version.
        (SWITCH_TABLE_CONS): Define.
        (SWITCH_TABLE): Use SWITCH_TABLE_CONS.
        (md_apply_fix): Change parameter types if BFD_ASSEMBLER.  Only
        handle fx_r_type == 0 if not BFD_ASSEMBLER.  Return 0 if
        BFD_ASSEMBLER.
        (struct reloc_map): Define if not BFD_ASSEMBLER.
        (coff_reloc_map): Likewise.
        (sh_coff_reloc_mangle): Use coff_reloc_map to convert fx_r_type.
        (tc_gen_reloc): New function if BFD_ASSEMBLER.
        * write.c (write_relocs): Ifdef out fx_where test which triggers
        inappropriately for SH ELF.
        (write_object_file): Call tc_frob_file_before_adjust and
        obj_frob_file_before_adjust if they are defined.

        * write.c (write_object_file): Use BFD_RELOC_16, not
        BFD_RELOC_NONE, when calling fix_new_exp for a broken word.

        * read.c (emit_expr): Fix conversion of byte count to BFD reloc
        code.

Fri Aug 30 14:47:38 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>

        * config/tc-d10v.c (find_opcode): Fix problem with calculating 
        branch sizes in across sections.

Fri Aug 30 00:44:13 1996  Jeffrey A Law  (law@cygnus.com)

        * config/tc-850.c (md_assemble): Handle hi() correctly.  Handle
        hi0() too.

Wed Aug 28 23:11:08 1996  Jeffrey A Law  (law@cygnus.com)

        * config/tc-v850.c (md_begin): Deal with end of opcode
        table marker.

Wed Aug 28 19:20:04 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>

        * config/tc-d10v.c (find_opcode): Fix a bug which could generate
        the wrong opcode for cases like st2w where there are many forms
        of the same instruction.

Tue Aug 27 13:53:22 1996  Ian Lance Taylor  <ian@cygnus.com>

        * expr.c (operand): If md_parse_name is defined, call it before
        calling symbol_find_or_make.
        * config/tc-ppc.h (md_parse_name): Define.
        (ppc_parse_name): Declare.
        * config/tc-ppc.c (reg_name_search): Add regs and regcount
        parameters.
        (register_name): Update call to reg_name_search.
        (cr_operand): New static variable.
        (cr_names): New static const array.
        (ppc_parse_name): New function.
        (md_assemble): If PPC_OPERAND_CR is set in the operand flags, set
        cr_operand before calling expression.

Tue Aug 27 09:05:50 1996  Jeffrey A Law  (law@cygnus.com)

        * config/tc-hppa.c (tc_gen_reloc): Add new argument to
        hppa_gen_reloc_type call.

Mon Aug 26 18:24:51 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>

        * config/tc-d10v.c: Fixed ".word".  Fixed problem with range checking
        on addresses.  Improved error messages.
        * doc/c-d10v.texi: Added docs for register pairs.

Mon Aug 26 13:39:27 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>

        * config/tc-d10v.c (parallel_ok): Fix bug in parallel 
        checking code.

Mon Aug 26 14:38:22 1996  Ian Lance Taylor  <ian@cygnus.com>

        * ecoff.c (init_file): Initialize fMerge to 1.
        (add_file): Restore old file merging code, but only merge files if
        fMerge is set.
        (ecoff_directive_loc): Clear fMerge field of current file.
        (ecoff_generate_asm_lineno): Likewise.

Fri Aug 23 11:40:47 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>

        * doc/c-d10v.texi: Fix typo. 

Fri Aug 23 10:41:32 1996  Jeffrey A Law  (law@cygnus.com)

        * config/tc-v850.c (md_assemble): Correct bit masking for
        hi and lo expressions.

        * config/tc-v850.c (md_assemble): Rough cut at demanding
        "ep" or "r30" in sst and sld instructions.
        (md_apply_fix3): Don't abort.  Just warn that we don't
        have relocs yet.

        * config/tc-v850.c (CC_NAME_CNT): Define.
        (cc_name): New function.
        (md_assemble): Handle V850_OPERAND_CC correctly.

        * config/tc-v850.c (md_assemble): Don't forget to initialize
        "insn"!

        * config/tc-v850.c (reg_name_search): Generalize to search
        any given register table.
        (register_name): Pass appropriate table and size to reg_name_search.
        (system_register_name): New function.
        (SYSREG_NAME_CNT): Define.
        (md_assemble): Handle operands which are system registers.
        
        * config/tc-v850.c (md_assemble): If we find a register, but the
        opcode doesn't want a register, then we don't have a match.
        (md_assemble): Get size of the instruction from the opcode table.

Thu Aug 22 10:20:30 1996  Ian Lance Taylor  <ian@cygnus.com>

        * configure.in: Set and substitute HLDENV.
        * configure: Rebuild.
        * Makefile.in (HLDENV): New variable.
        (as.new): Use $(HLDENV).

        * ecoff.c (ecoff_directive_endef): Avoid a division by zero error
        if an array dimension is not known.

Thu Aug 22 10:50:00 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>

        * config/tc-d10v.c: Fix a reloc bug caused by my last change. 
        * doc/c-d10v.texi: Cleanup.
        
Tue Aug 20 15:15:16 1996  J.T. Conklin  <jtc@hippo.cygnus.com>

        * config/tc-v850.c: New file.
        * config/tc-v850.h: New file.
        * configure (v850-*-elf): New target.
        * configure.in (v850-*-elf): New target.
        
Wed Aug 21 15:50:54 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>

        * doc/c-d10v.texi: New file.
        * doc/all.texi: Added D10V stuff.
        * doc/as.texinfo: Added D10V stuff.

Tue Aug 20 14:10:02 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>

        * config/tc-d10v.c: All references to defined symbols should
        now use the optimal instruction.  .float and .double now work. 

Mon Aug 19 14:41:36 1996  Ian Lance Taylor  <ian@cygnus.com>

        * config/obj-coff.c (fixup_segment): Adjust PC relative reloc by
        section address for the i960 as is done for the i386.

Thu Aug 15 16:37:59 1996  Stan Shebs  <shebs@andros.cygnus.com>

        * mpw-config.in: Add wildcards for config matching, add mips-*-*
        case, forward-include bfd/elf-bfd.h.

Thu Aug 15 13:24:30 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>

        * config/tc-d10v.c: Add additional information to the opcode
        table to help determinine which instructions can be done
        in parallel. 

Thu Aug 15 17:01:31 1996  James G. Smith  <jsmith@cygnus.co.uk>

        * config/tc-arm.c: Major changes to add Thumb support, with lots
        of change input from <rearnsha@armltd.co.uk>.
        Reverted to INSN_SIZE macro, rather than insn_size variable.
        (insns): Added ARM "bx" instruction support.
        (tinsns): Added Thumb instruction definition structure.
        (arm_tops_hsh): Added hash structure for Thumb opcodes.
        (md_pseudo_table): Added ".arm", ".thumb" and ".code" pseudo-ops.
        (opcode_select,s_arm,s_thumb,s_code): Added.
        (decode_shift): Allow upper-case RRX.
        (do_ldst): Simpler halfword support.
        (do_ldmstm): Improved.
        (reg_list, do_bx, thumb_reg, thumb_add_sub, thumb_shift,
        thumb_mov_compare, thumb_load_store, do_t_arit, do_t_add,
        do_t_asr, do_t_branch, do_t_bx, do_t_compare, do_t_ldmstm,
        do_t_ldrb, do_t_ldrh, do_t_lds, do_t_lsl, do_t_lsr, do_t_mov,
        do_t_push_pop, do_t_str, do_t_strb, do_t_strh, do_t_sub, do_t_swi,
        do_t_adr): Added.
        (md_apply_fix3): Add support for BFD_RELOC_ARM_THUMB_* relocations.
        (md_parse_option): Add support for -mthumb.
        (md_show_usage): Updated to reflect new command line option.
        (arm_data_in_code, arm_canonicalize_symbol_name): Added.
        * config/tc-arm.h: Provide TC_FIX_TYPE to allow private ARM
        fragment information to be held.

Thu Aug 15 16:12:00 1996  Richard Earnshaw (rearnsha@armltd.co.uk)

        * tc-arm.c (md_apply_fix3): Also set fixP->fx_done if fx_addsy is 
        non-null, but is a constant.
        (fix_new_arm): Call make_expr_symbol to make the expression symbol
        so that error reporting will work correctly.

Wed Aug 14 10:37:21 1996  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-i386.c (tc_i386_fix_adjustable): Don't adjust relocs
        against weak symbols.

Tue Aug 13 17:39:24 1996  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-ppc.h (TC_FORCE_RELOCTION): Define if OBJ_XCOFF.
        (ppc_force_relocation): Declare if OBJ_XCOFF.
        * config/tc-ppc.c (ppc_force_relocation): New function if
        OBJ_XCOFF.

Mon Aug 12 16:49:43 1996  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-mips.h (BYTE_ORDER): Don't define.  No longer used.

Fri Aug  9 17:48:28 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>

        * config/tc-d10v.c: Fix problem with relocs. 

Fri Aug  9 14:16:14 1996  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-sh.c (sh_do_align): If not BFD_ASSEMBLER, always align
        with nops if not in data_section or bss_section.

Thu Aug  8 12:32:56 1996  Klaus Kaempf  <kkaempf@progis.de>

        Add support for openVMS/Alpha.
        * as.h (PRINTF_LIKE): Don't define if VMS, for now.
        * config/obj-evax.c: New file.
        * config/obj-evax.h: New file.
        * config/tc-alpha.c: Add support for EVAX format if OBJ_EVAX is
        defined.
        * config/tc-alpha.h: Add support for EVAX format if OBJ_EVAX is
        defined.  Add case for bfd_target_evax_flavour.
        * config/vms-a-conf.h: New file.
        * conf-a-gas.com: New file.
        * configure.in: Add target alpha-*-*vms*.
        * configure: Rebuild.
        * makefile.vms: New file.
        * read.c (s_lcomm): Align bss_seg on 8 byte boundary if OBJ_EVAX.
        Don't call ffs on openVMS/Alpha.

Wed Aug  7 14:19:03 1996  Philippe De Muyter  <phdm@info.ucl.ac.be>

        * configure.in: Make GAS_CHECK_DECL_NEEDED include <string.h> or
        <strings.h> if they exist.  Call GAS_CHECK_DECL_NEEDED on strstr
        and sbrk.
        * acconfig.h (NEED_DECLARATION_STRSTR): New macro.
        (NEED_DECLARATION_SBRK): New macro.
        * configure, conf.in: Rebuild.
        * as.h: Only include <strings.h> if HAVE_STRINGS_H.
        (strstr): Declare if NEED_DECLARATION_STRSTR.
        * as.c: If HAVE_SBRK and NEED_DECLARATION_SBRK, declare sbrk.

Wed Aug  7 11:50:26 1996  Ian Lance Taylor  <ian@cygnus.com>

        * symbols.c (resolve_symbol_value): Handle addition or subtraction
        by a constant before entering the main switch.  Reject attempts to
        apply an arithmetic function to non-absolute symbols, except for
        the special case of subtraction of two symbols in the same
        section.

        * config/tc-mips.c (md_section_align): Do align if OBJ_ELF, but
        not to more than a 16 byte boundary.

        * config/tc-i386.c (tc_gen_reloc): Accept all relocs; remove
        #ifndef OBJ_ELF lines.  From Eric Valette <valette@crf.canon.fr>.
        (tc_gen_reloc): If out of memory call as_fatal rather than
        assert.  If no howto found, call as_bad_where rather than
        as_fatal.  Change the error message slightly.  Set howto to a
        non-NULL value in order to keep going.

Tue Aug  6 12:58:03 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>

        * config/tc-d10v.c: Added code to support 32-bit fixups for stabs.

Tue Aug  6 11:15:26 1996  Jeffrey A Law  (law@cygnus.com)

        * config/tc-h8300.c (get_specific): New operand "size" derived
        from ".b", ".w" and ".l" extensions.  All callers changed.  If
        the base instruction has no operands, then use the size to
        determine which specific instruction to use.

Mon Aug  5 14:21:10 1996  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-i960.c (mem_fmt): Call parse_expr before emit.

Fri Aug  2 11:23:31 1996  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-mips.c (md_section_align): Don't change addr if
        OBJ_ELF.

Thu Aug  1 23:51:52 1996  Jeffrey A Law  (law@cygnus.com)

        * config/tc-hppa.c: Revert yesterday's changes.
        
Wed Jul 31 14:46:11 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>

        * config/tc-d10v.c: Disable range checking on 16-bit values.

Wed Jul 31 16:27:19 1996  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-m68k.c (m68k_ip): Set ok_arch for every instruction,
        not just the ones that don't match.

Wed Jul 31 11:45:15 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>

        * config/tc-d10v.c: Fixed bugs in short relocs and range checking.

Wed Jul 31 15:41:42 1996  James G. Smith  <jsmith@cygnus.co.uk>

        * config/tc-arm.c: Changed INSN_SIZE to variable insn_size, as
        pre-cursor to adding Thumb support. Also added cpu_variant flag
        information to each of the asm_flg structures.
        (md_parse_option): Updated ARM7 parsing to allow 't' for
        thumb/halfword support, aswell as 'm' for long multiply.
        (md_show_usage): Updated help message.
        (md_assemble): Check that instruction flags are applicated to the
        current cpu variant.
        (md_apply_fix3, tc_gen_reloc): Add BFD_RELOC_ARM_OFFSET_IMM8 and
        BFD_RELOC_ARM_HWLITERAL relocation support for new halfword and
        signextension instructions.
        (do_ldst): Generate halfword and signextension variants if
        mnemonic flags match.
        (ldst_extend): Do not allow shifts in the offset field of halfword
        or signextension instructions.
        (validate_offset_imm): Provide check on halfword and signextension
        immediate range.
        (add_to_lit_pool): Merge identical literal pool values.

Tue Jul 30 14:28:23 1996  Jeffrey A Law  (law@cygnus.com)

        * config/tc-hppa.c (selector_table): Add 'E' selector.
        (cons_fix_new_hppa): Don't coke on e_esel.
        (tc_gen_reloc, SOM version): Handle R_COMP2 when used
        to help generate exception handling tables.
        (md_apply_fix): Don't try to apply fixups with an e_esel
        selector.
        (hppa_fix_adjustable): Fixups with e_esel selectors
        are not adjustable.

Tue Jul 30 15:51:41 1996  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-sparc.c (md_pseudo_table): Add 2byte, 4byte, and 8byte
        pseudo-ops.

Fri Jul 26 11:43:03 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>

        * config/tc-d10v.c: Added lots of error checking.  Added hacks
        to support accumulator shifts.
        
Fri Jul 26 11:56:08 1996  Ian Lance Taylor  <ian@cygnus.com>

        * symbols.c (S_SET_EXTERNAL): Let .weak override.
        (S_CLEAR_EXTERNAL): Likewise.
        (S_SET_WEAK): Remove error; just let .weak override.

Thu Jul 25 15:22:51 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>

        * config/tc-d10v.c (md_assemble): Now handles multiline
        instructions.

Thu Jul 25 12:03:33 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>

        * config/tc-d10v.c: Fix packaging bug. Added range checking.
        Added kludge for divs instruction.  Fixed minor problem with
        multiple text sections.
        * config/tc-d10v.h (d10v_cleanup): Change prototype. 
        
Tue Jul 23 10:49:36 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>

        * config/tc-d10v.c (md_apply_fix3): Fix all instruction
        addresses to be right-shifted by 2.

Mon Jul 22 11:32:36 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>

        * config/tc-d10v.c: Many changes to get relocs working.
        (register_name): No longer creates a symbol for register names.
        (pre_defined_registers): moved to opcodes/d10v-opc.c.
        (d10v_insert_operand): Now works correctly for either container.
        * config/tc-d10v.h (d10v_cleanup): Declare. 
        
Mon Jul 22 14:01:33 1996  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-mips.c (tc_gen_reloc): BFD_RELOC_PCREL_HI16_S and
        BFD_RELOC_PCREL_LO16 are expected to be PC relative.

Mon Jul 22 12:46:55 1996  Richard Henderson  <rth@tamu.edu>

        * tc-alpha.c: Patches to track current minimum alignment to reduce
        the number of fragments created with frag_align.
        (alpha_current_align): New static variable.
        (s_alpha_text): Reset alignment to 0.
        (s_alpha_data, s_alpha_rdata, s_alpha_sdata): Likewise.
        (s_alpha_stringer, s_alpha_space): New functions.
        (s_alpha_cons, alpha_flush_pending_output): Remove functions.
        (alpha_cons_align): New function to replace both of them.
        (emit_insn): Only align if alpha_current_align is less than 2;
        reset alpha_current_align to 2.
        (s_alpha_gprel32): Likewise.
        (s_alpha_section): New function.  Basically duplicate the other
        alpha section change hooks.  Only define for ELF.
        (s_alpha_float_cons): Simplify alignment handling.
        (md_pseudo_table): Only define "rdata" and "sdata" if OBJ_ECOFF.
        If OBJ_ELF, define "section", "section.s", "sect", and "sect.s".
        Don't define the s_alpha_cons pseudo-ops.  Do define
        s_alpha_stringer and s_alpha_space pseudo-ops.
        (alpha_align): Skip if less than current default alignment.  Set
        default alignment.
        * tc-alpha.h (md_flush_pending_output): Remove.
        (md_cons_align): Add.

        * tc-alpha.c: Add oodles of function description comments.
        (md_bignum_to_chars): Remove; there are no callers.
        (md_show_usage): Mention some more variants.

Thu Jul 18 15:54:54 1996  Ian Lance Taylor  <ian@cygnus.com>

        From Andrew Gierth <ANDREWG@microlise.co.uk>:
        * configure.in (sparc-*-sysv4*): New target.
        * configure: Rebuild.

        * config/tc-sparc.c (md_pseudo_table): Change uahalf, uaword, and
        uaxword to use s_uacons.
        (sparc_no_align_cons): New static variable.
        (s_uacons): New static function.
        (sparc_cons_align): If sparc_no_align_cons is set, just clear it
        and return.

        * config/tc-sparc.c (s_common): Remove unused label allocate_bss.

        * configure.in: Add mips-*-irix6* target.  Handle Irix 6 like Irix
        5 with regard to shared libraries.
        * configure: Rebuild.

        * config/tc-m68k.c (m68k_ip): Use the correct length when
        allocating space for the unsupported architecture error message.

Thu Jul 18 12:57:10 1996  Michael Meissner  <meissner@tiktok.cygnus.com>

        * configure.in (d10v-*-*): Allow d10v-*-*, don't require d10v-*-elf*.

Wed Jul 17 14:25:13 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>

        * config/tc-d10v.c: New file.
        * config/tc-d10v.h: New file.
        * configure (d10v-*-elf): New target.
        * configure.in (d10v-*-elf): New target.
        
Fri Jul 12 20:54:19 1996  Michael Meissner  <meissner@tiktok.cygnus.com>

        * config/tc-ppc.c (md_parse_option): Recognize -K PIC.

Wed Jul 10 12:39:08 1996  Richard Henderson  <rth@tamu.edu>

        * config/tc-alpha.c (alpha_align): Change fill parameter
        to a pointer.  Take NULL as 0 or nop depending on section.  Change
        all callers.
        (s_alpha_align): Rename local variables.

        * doc/as.texinfo (.align): Document action of omitted
        fill parameter.

Wed Jul 10 00:23:30 1996  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-ppc.c (md_apply_fix3): Give a useful error message
        when an unsupported PC relative reloc is seen, rather than calling
        abort.

        * app.c (do_scrub_chars): Remove not_cpp_line local variable.
        Instead, check state when '#' comment is seen.

Mon Jul  8 14:11:49 1996  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-mips.c (mips_regmask_frag): Only define if OBJ_ELF or
        OBJ_MAYBE_ELF.
        (tc_gen_reloc): If fixup was changed to be PC relative, change
        reloc type accordingly.  Use name of reloc in error message.

        * as.h: Don't define const or volatile.
        * flonum.h: Don't define const.

        * config/tc-m68k.c (tc_gen_reloc): Change the code appropriately
        if fx_pcrel is set.  Correct setting the addend case in the
        OBJ_ELF case (from Andreas Schwab
        <schwab@issan.informatik.uni-dortmund.de>).
        (md_show_usage): Correct -mfc5200 to -m5200.

Fri Jul  5 10:32:58 1996  J.T. Conklin  <jtc@rtl.cygnus.com>

        * doc/c-m68k.texi: Document -m5200 flag.
        * doc/as.texinfo: Likewise.

        * config/tc-m68k.c (m68k_ip): The coldfire does not support 8x
        scale factor.

Fri Jul  5 11:07:24 1996  Ian Lance Taylor  <ian@cygnus.com>

        * symbols.c (S_SET_EXTERNAL): Change as_warn to as_bad.
        (S_CLEAR_EXTERNAL, S_SET_WEAK): Likewise.

Thu Jul  4 11:59:46 1996  Ian Lance Taylor  <ian@cygnus.com>

        * Makefile.in (VERSION): Set to cygnus-2.7.1.

        * Released binutils 2.7.

Thu Jul  4 10:11:33 1996  James G. Smith  <jsmith@cygnus.co.uk>

        * config/tc-mips.c (mips_ip): Only perform range check when
        dealing with O_constant expressions.

Wed Jul  3 15:02:21 1996  J.T. Conklin  <jtc@rtl.cygnus.com>

        * m68k-parse.h (m68k_register): Add new coldfile control
        registers.

        * config/tc-m68k.c (mcf5200_control_regs): New variable, 
        array of control registers for the coldfire.
        (cpu_of_arch): Added mcf5200.
        (archs): Added mcf5200.
        (init_table): Add new control registers.
        (m68k_ip): Added support for new control registers.
        (m68k_init_after_args): Likewise.

        * config/tc-m68k.c (md_show_usage): Add -m5200 to usage text.

Wed Jul  3 16:05:50 1996  Ian Lance Taylor  <ian@cygnus.com>

        * read.h (is_it_end_of_statement): Declare.
        * read.c (is_it_end_of_statement): Remove declaration.

        * config/tc-ppc.c (ppc_elf_suffix): Correct parenthesization of ||
        within &&.
        (md_assemble): Fix handling of @l with an unsigned constant.  Add
        default case to reloc switch.

        * config/tc-i386.h (AOUT_MACHTYPE): Define as 0 if TE_386BSD.

        Based on patches from Tom Quiggle <quiggle@sgi.com>:
        * ecoff.c (last_lineno): New static variable.
        (add_procedure): Set last_lineno.
        (ecoff_directive_loc): Likewise.
        (ecoff_generate_asm_lineno): Likewise.
        (ecoff_fix_loc): New function.
        * ecoff.h (ecoff_fix_loc): Declare.
        * config/tc-mips.c (append_insn): When inserting nops, and using
        ECOFF debugging, call ecoff_fix_loc.

Tue Jul  2 23:02:12 1996  Jeffrey A Law  (law@cygnus.com)

        * config/tc-h8300.c (build_bytes): If an operand type is 
        marked as SRC_IN_DST retrieve it from the "destination" op.

Sat Jun 29 13:38:31 1996  Ian Lance Taylor  <ian@cygnus.com>

        * configure.in (arm-*-riscix*): Set emulation to riscix.
        * configure: Rebuild.
        * config/te-riscix.h: New file to define TE_RISCIX.

        * config/tc-sh.h (SUB_SEGMENT_ALIGN): Define.

Fri Jun 28 15:14:31 1996  Ian Lance Taylor  <ian@cygnus.com>

        * Makefile.in (config.status): Just run config.status as other
        tools do.

Fri Jun 28 11:09:38 1996  Stan Shebs  <shebs@andros.cygnus.com>

        * mpw-config.in (TARGET_OS): Add definition to conf.

Thu Jun 27 20:39:40 1996  James G. Smith  <jsmith@cygnus.co.uk>

        * config/tc-mips.c (append_insn): Parenthesize
        cop_interlocks expressions.

Thu Jun 27 12:18:26 1996  Ian Lance Taylor  <ian@cygnus.com>

        * listing.c (listing_print): Close the listing file if it is not
        stdout.  Close the other files opened for the listing.

        * config/tc-sparc.h (md_cons_align): Define.
        (sparc_cons_align): Declare.
        (HANDLE_ALIGN): Define.
        (sparc_handle_align): Declare.
        * config/tc-sparc.c (sparc_cons_align): New function.
        (sparc_handle_align): New function.
        * read.c (cons_worker): Call md_cons_align if it is defined.

        * as.h (struct frag): Add fr_file and fr_line fields.
        * frags.c (frag_new): Set fr_file and fr_line.
        (frag_var): Likewise.
        (frag_variant): Likewise.

        * as.h (struct frag): Remove unused align_mask and align_offset
        fields.

        * listing.c (calc_hex): Offset by fr_fix when examining fr_var.
        From <uddeborg@carmen.se>.

Wed Jun 26 13:21:34 1996  Ian Lance Taylor  <ian@cygnus.com>

        * configure.in (mips-*-osf*): New target.
        * configure: Rebuild.

        * config/tc-m68k.c: Add 68ec060 as a synonym for 68060.

Wed Jun 26 16:23:08 1996  James G. Smith  <jsmith@cygnus.co.uk>

        * config/tc-mips.c: Added cop_interlocks, to avoid NOP insertion
        between co-processor comparisons and branches for the VR4300.

Mon Jun 24 18:02:50 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)

        * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
        INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
        (docdir): Removed.
        * configure.in (AC_PREREQ): autoconf 2.5 or higher.
        * doc/Makefile.in (bindir, libdir, datadir, mandir, infodir,
        includedir): Use autoconf set values.
        (docdir): Removed.

Mon Jun 24 11:58:14 1996  Ian Lance Taylor  <ian@cygnus.com>

        * listing.c (listing_eject): Don't do anything if listing is 0.
        (listing_list): Likewise.
        (listing_source_line): Likewise.
        (listing_title): Don't save title if listing is 0.
        (listing_source_file): Check listing rather than listing_tail.

        * configure.in: On alpha*-*-osf*, link against libbfd.a if not
        using shared libraries.
        * configure: Rebuild.

Fri Jun 21 18:22:23 1996  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-mips.c (mips_ip): In case 'i'/'j', don't require an
        absolute expression if a relocation type was specified.

Fri Jun 21 17:40:16 1996  Joel Sherrill  <joel@merlin.gcs.redstone.army.mil>

        * configure.in: Add support for *-*-rtems* configurations.
        * configure: Rebuild.

Fri Jun 21 16:01:18 1996  Richard Henderson  <rth@tamu.edu>

        * configure.in: Add alpha-*-linuxecoff* target.  Use elf for
        alpha-*-linux* target.  Force bfd_gas for alpha-*.  Require
        opcodes library for alpha.
        * configure: Rebuild with autoconf 2.10.
        * config/tc-alpha.c: Substantial rewrite to add ELF support and
        use new opcode table.
        * config/tc-alpha.h (md_undefined_symbol): Don't define.
        (LOCAL_LABEL): Define differently if OBJ_ELF.
        (FAKE_LABEL_NAME): Define if OBJ_ELF.
        * config/alpha-opcode.h: Remove.
        * config/obj-elf.h: If TC_ALPHA, define ECOFF_DEBUGGING.
        * Makefile.in (TARG_CPU_DEP_alpha): Depend upon
        include/opcode/alpha.h rather than config/alpha-opcode.h.

Thu Jun 20 19:10:28 1996  Ian Lance Taylor  <ian@cygnus.com>

        * config/obj-aout.c (obj_emit_relocations): Give an error if the
        relocation symbol was not resolved.
        * config/obj-coff.c (do_relocs_for): Likewise.

        * write.c (adjust_reloc_syms): Refetch the symbol section after
        calling S_GET_VALUE, since it may have changed.

        * expr.c (struct expr_symbol_line): Define.
        (expr_symbol_lines): New static variable.
        (make_expr_symbol): Add entry to expr_symbol_lines.
        (expr_symbol_where): New function.
        * expr.h: Use extern on function declarations.
        (expr_symbol_where): Declare.
        * symbols.c (resolve_symbol_value): Try to use expr_symbol_where
        rather than printing the meaningless name of an expression
        symbol.

Thu Jun 20 15:57:41 1996  Ken Raeburn  <raeburn@cygnus.com>

        * config/tc-i386.c (md_number_to_chars): Deleted.
        * config/tc-i386.h (md_number_to_chars): New macro.

        * config/tc-alpha.c (build_operate_n, build_mem): Moved earlier in
        the file.
        (load_symbol_address, load_expression): Use build_mem.
        (build_operate): New function.
        (emit_addq_r): Use it.

        Wed Mar 13 22:14:14 1996  Pat Rankin  <rankin@eql.caltech.edu>

        * symbols.c (colon):  #if VMS, use S_SET_OTHER to store `const_flag'.

        Tue Mar  5 14:31:45 1996  Pat Rankin  <rankin@eql.caltech.edu>

        * config/tc-vax.h (NOP_OPCODE): Define.

        Sun Feb  4 21:01:03 1996  Pat Rankin  <rankin@eql.caltech.edu>

        * config/obj-vms.h (S_IS_COMMON): Define.
        (S_IS_LOCAL): Check for \002 as well as \001.
        (LONGWORD_ALIGNMENT): New macro.
        (SUB_SEGMENT_ALIGN): Use it.

        Fri Jan 26 17:44:09 1996  Pat Rankin  <rankin@eql.caltech.edu>

        * config/vms-conf.h: Reconcile with conf.in.

Wed Jun 19 11:31:50 1996  Ian Lance Taylor  <ian@cygnus.com>

        * write.c (is_dnrange): Only define if TC_GENERIC_RELAX_TABLE is
        defined.

        * doc/as.texinfo: Document that any number of hex digits can
        follow \x.

        * as.c (struct defsym_list): Define.
        (defsyms): New static variable.
        (parse_args): Just put --defsym arguments on defsyms list, rather
        than defining them.
        (main): Define defsyms after output file is created.

        * config/tc-m68k.c (m68k_ip): Reject PRE and POST indexing mode on
        cpu32.  From Eric Norum <Eric.Norum@usask.ca>.

        * config/tc-mips.c (mips_ip): In cases 'I', 'i', and 'j', set
        insn_error rather than calling check_absolute_expr.

        * as.c (emulation_name): Remove unused static variable.
        (default_emul_bfd_name): Add return NULL to avoid warning.
        * ecoff.c (ecoff_stab): Remove unused variables name and
        name_end.
        * frags.c (frag_new): Remove unused variable tmp.
        * hash.c (hash_grow): Parenthesize + within <<.
        (hash_print_statistics): Use %lu, not %d, to print unsigned
        long variables.
        * messages.c: Include "libiberty.h".
        (fprint_value): Add cast to avoid printf warning.
        (sprint_value): Likewise.
        * read.c: Include "ecoff.h".
        (emit_expr): Add casts to avoid printf warnings.
        * read.h: Use extern for function declarations.
        (pop_insert): Declare.
        * stabs.c: Include "ecoff.h".
        * subsegs.c (subseg_set_rest): Remove unused variables tmp,
        former_last_fragP, and new_fragP.
        * subsegs.h (subsegs_print_statistics): Declare.
        * symbols.c (debug_verify_symchain): Change macro to discard
        arguments.
        * write.c (dump_section_relocs): Likewise.
        * write.h: Use extern for function declarations.
        (write_print_statistics): Declare.
        * config/e-mipsecoff.c (mipsecoff_bfd_name): Return NULL to avoid
        warning.
        * config/e-mipself.c (mipself_bfd_name): Likewise.
        * config/obj-elf.h (elf_ecoff_set_ext): Declare.

        * config/tc-sparc.h (TC_RELOC_RTSYM_LOC_FIXUP): If OBJ_ELF, always
        emit relocations against external symbols.

        * config/tc-alpha.c (tc_gen_reloc): Output a sensible error
        message if bfd_reloc_type_lookup fails, rather than calling
        assert.

        * config/tc-alpha.c (alpha_force_relocation): Add
        BFD_RELOC_12_PCREL to switch.

Tue Jun 18 20:29:57 1996  Doug Evans  <dje@canuck.cygnus.com>

        * config/tc-i386.h (LOCAL_LABEL,FAKE_LABEL_NAME): Use defaults for
        TE_PE (Lfoo, not .Lfoo).

Tue Jun 18 17:13:33 1996  Ian Lance Taylor  <ian@cygnus.com>

        * read.c (s_fill): Don't warn about a zero repeat count.

        * config/tc-mips.c (mips_ip): Don't warn about using AT as a
        coprocessor register.

        * config/tc-i386.c (md_assemble): When checking the size of a
        register to set the size of an instruction, do a bitwise and with
        Reg8 and Reg16 rather than requiring the type to be exactly Reg8
        or Reg16.

Tue Jun 18 13:19:51 1996  Jeffrey A. Law  <law@rtl.cygnus.com>

        * config/tc-h8300.c (parse_reg): Tweak error messages.
        (build_bytes): Likewise.
        (skip_colonthing): Handle :32 suffix.
        (get_specific): Promote L_24 to L_32 if it makes a match.
        Don't always promote L_8 to L_16.
        (do_a_fix_imm): Clean up L_32 and L_24 handling.

        * config/tc-h8300.c (Smode): New variable.
        (h8300hmode): Turn off Hmode.
        (h8300smode): New function.  Turn on Smode and Hmode.
        (md_pseudo_table): New ".h8300s" pseudo-op.
        (parse_reg): Handle "exr" register.
        (get_operand): Handle bizarre syntax for "stm.l" and "ldm.l".
        Handle "mach" and "machl" operands for ldmac.
        (get_specific): Handle "stm.l" and "ldm.l".
        (build_bytes): Handle "stm.l" and "ldm.l"; handle MACREG operands.
        * config/tc-h8300.h (COFF_MAGIC): Handle H8/S magic number.
        (Smode): Declare.

Mon Jun 17 15:50:53 1996  J.T. Conklin  <jtc@rtl.cygnus.com>

        * doc/as.texinfo: Reorder chapter of machine dependent options so
        that it is sorted by chip name.  

        * doc/as.texinfo: Use consistant spelling of Vax.
        * doc/c-vax.texi: Likewise.

Mon Jun 17 11:26:56 1996  Jeffrey A. Law  <law@rtl.cygnus.com>

        * config/tc-hppa.c (md_pseudo_table): Add ".begin_try" and ".end_try"
        pseudo ops.
        (tc_gen_reloc, SOM version): Handle R_BEGIN_TRY and R_END_TRY.
        (md_apply_fix): Likewise.
        (pa_try): New function.
        (hppa_force_relocation): Force relocs for BEGIN_TRY and END_TRY.

Sun Jun 16 22:57:47 1996  Jeffrey A. Law  <law@rtl.cygnus.com>

        * config/tc-hppa.c (md_pseudo_table): Add ".level" pseudo op.
        (pa_level): New function.

Fri Jun 14 20:06:44 1996  Ian Lance Taylor  <ian@cygnus.com>

        * listing.c (listing_newline): Don't do anything if listing is 0.

Thu Jun 13 17:50:54 1996  Ian Lance Taylor  <ian@cygnus.com>

        * subsegs.c (section_symbol): If symbol_table_frozen is set, call
        symbol_create, not symbol_new.

Wed Jun 12 14:10:44 1996  Ian Lance Taylor  <ian@cygnus.com>

        * write.c (adjust_reloc_syms): Don't set sy_used_in_reloc for an
        absolute symbol unless TC_FORCE_RELOCATION returns true.

        * config/obj-coff.c (previous_file_symbol): Remove BFD_ASSEMBLER
        version.
        (c_dot_file_symbol): BFD_ASSEMBLER version: Don't set the value of
        the symbol to a pointer.  Don't set previous_file_symbol.
        Simplify symbol list rearrangement.
        (coff_frob_symbol): Don't do anything with C_FILE symbols.
        (coff_adjust_symtab): Don't check previous_file_symbol.

Mon Jun 10 14:52:29 1996  Michael Meissner  <meissner@tiktok.cygnus.com>

        * config/tc-ppc.c (ppc_elf_lcomm): New function for .lcomm
        directive.
        (md_pseudo_table): Add ppc_elf_lcomm.

Mon Jun 10 11:45:51 1996  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-m68k.c (m68k_ip): Accept ABSL for 'O', so that `bfextu
        d0{24:1},d0' works without an immediate prefix on the bit numbers.
        (md_begin): Add digits to alt_notend_table.
        (md_parse_option): Make s a const pointer.

        * config/tc-sparc.c (md_pseudo_table): Add "empty".
        (s_empty): New static function.

        * config/obj-coff.c (struct filename_list): Only define if not
        BFD_ASSEMBLER.
        (filename_list_head, filename_list_tail): Likewise.
        (c_section_symbol): Remove unused BFD_ASSEMBLER version.
        (obj_coff_endef, BFD_ASSEMBLER version): Don't set the debugging
        flag for C_MOS, C_MOE, C_MOU, or C_EOS symbols, since they should
        have a section of N_ABS rather than N_DEBUG.  If we do a merge,
        remove the new symbol from the list.
        (obj_coff_endef, both versions): Call tag_insert even if there is
        an old symbol with the same name, if the old symbol does not
        happen to be a tag.
        (coff_frob_symbol): Check SF_GET_TAG, C_EOF, and C_FILE outside of
        the SF_GET_DEBUG condition.  Don't call SA_SET_SYM_ENDNDX with a
        symbol that will be moved to the end of the symbol list.
        (coff_adjust_section_syms): Always call section_symbol for .text,
        .data, and .bss.
        (coff_frob_section): Likewise.  Also, remove unused variable
        strname.

        * config/tc-ns32k.c (convert_iif): Call frag_grow rather than
        manipulating frags directly.
        (md_number_to_field): Adjust mem_ptr correctly if ENDIAN is
        defined.

        * app.c (do_scrub_chars): If '/' is LINE_COMMENT_START, check
        whether the next character is '*' before checking whether we are
        at the start of a line.  Permit LINE_COMMENT_START to start a
        comment in state 1 (seen some whitespace) as well, to match the
        documentation.

        * gasp.c (do_align): Permit a fill value for .align.

Wed Jun  5 17:09:26 1996  Ian Lance Taylor  <ian@cygnus.com>

        * read.c (next_char_of_string): Warn if a newline is seen in the
        middle of a string.  Call bump_line_counters when appropriate.

Wed Jun  5 17:08:36 1996  Richard Henderson  <rth@tamu.edu>

        * symbols.c (colon): Use LOCAL_LABEL.

Tue Jun  4 10:55:16 1996  Tom Tromey  <tromey@csk3.cygnus.com>

        * Makefile.in (install): Don't check to see if tooldir exists.
        Make $(tooldir) and $(tooldir)/bin.

Tue Jun  4 10:14:53 1996  Michael Meissner  <meissner@tiktok.cygnus.com>

        * config/ppc-sol.mt (TDEFINES): Don't turn on -mregnames by
        default.

Mon Jun  3 11:34:41 1996  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-mips.c (mips_ip): Don't call as_warn if we are setting
        insn_error.  Don't put the string "ERROR" in insn_error.  Set
        insn_error rather than calling as_warn for an unsupported opcode.

Sat Jun  1 21:51:55 1996  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-mips.c (md_parse_option): Check for a 64 bit format
        before permitting -64.
        * output-file.c (output_file_create): Remove duplicate
        bfd_perror.

Fri May 31 01:08:06 1996  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-mips.c (md_begin): If -64, create a .MIPS.options
        section rather than a .reginfo section.
        (mips_elf_final_processing): If -64, write out 64 bit RegInfo
        information.

        * config/tc-mips.c (load_register): If mips_isa < 3, permit a 32
        bit value with the high bit set.

Thu May 30 19:00:19 1996  Ian Lance Taylor  <ian@cygnus.com>

        * read.c (s_lcomm): Set section flags for .sbss section.

        * config/tc-mips.c (mips_64): New static variable.
        (mips_target_format): If mips_64, return elf64 targets rather than
        elf32 ones.
        (md_longopts): Add "32" and "64".
        (md_parse_option): Handle -32 and -64.
        (md_show_usage): Mention -32 and -64.
        (cons_fix_new_mips): If mips_64, don't convert an 8 byte reloc to
        a 4 byte one.

Thu May 30 10:36:19 1996  Michael Meissner  <meissner@tiktok.cygnus.com>

        * config/tc-ppc.c (comment_chars): Make '!' a comment character
        for Solaris compatibility.

        * stabs.c (s_stab_generic): Under PowerPC Solaris, convert a
        .stabd with 4 arguments into a .stabn.

Wed May 29 16:43:16 1996  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-mips.c (macro): When passing X_add_number to
        macro_build, cast it to int first.

Tue May 28 13:29:39 1996  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-z8k.c (md_apply_fix): Handle fx_r_type of 0, as
        created by emit_expr.

        * symbols.c (symbol_create): If bfd_make_empty_symbol fails, call
        as_perror rather than assert.

Fri May 24 18:24:11 1996  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-mips.c (mips_ip): Mark sections created to hold
        floating point information as read only.

Fri May 24 12:07:54 1996  David Edelsohn  <edelsohn@mhpcc.edu>

        * config/tc-ppc.c (ppc_set_cpu): Change defaults to match AIX.

Thu May 23 17:34:24 1996  Michael Meissner  <meissner@tiktok.cygnus.com>

        * read.c (potable): Add .skip as a synonym for .space.

        * stabs.c (s_stab_generic): For PowerPC ELF, allow .stabd to take
        4 arguments, providing the 4th argument is 0, to allow
        compatibility with the Solaris assembler.

Thu May 16 15:51:48 1996  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-sh.h (struct sh_segment_info_type): Define.
        (TC_SEGMENT_INFO_TYPE): Define.
        (sh_frob_label): Declare.
        (tc_frob_label): Define.
        (sh_flush_pending_output): Declare.
        (md_flush_pending_output): Define.
        * config/tc-sh.c (md_assemble): If relaxing, emit a R_SH_CODE
        reloc before the instruction if necessary.
        (sh_frob_label): New function.
        (sh_flush_pending_output): New function.
        (sh_coff_frob_file): Ignore ALIGN, CODE, DATA, and LABEL relocs
        when looking for the reloc for the target of .uses.
        (md_convert_frag): Fix printf format (%0xlx to 0x%lx).
        (sh_force_relocation): Force CODE, DATA, and LABEL relocs to be
        emitted.
        (md_apply_fix): Ignore CODE, DATA, and LABEL relocs.
        (sh_coff_reloc_mangle): Force CODE, DATA, and LABEL relocs to use
        the absolute symbol.

        * subsegs.h (segment_info_type): Add tc_segment_info_data field if
        TC_SEGMENT_INFO_TYPE is defined.

Wed May 15 12:23:53 1996  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-i386.c (md_assemble): Make sure the opcode suffix
        matches the register size.

Wed May 15 08:33:37 1996  Jeffrey A Law  (law@cygnus.com)

        * config/obj-coff.c (count_entries_in_chain): Ignore Fixups with
        fx_done set. 
        (do_relocs_for): Likewise.
        (fixup_segment): Don't just quit if linkrelax is set.  Try to
        apply non pc-relative sym1-sym2 fixups, even if linkrelax is
        nonzero.

Fri May 10 14:16:59 1996  Michael Meissner  <meissner@tiktok.cygnus.com>

        * config/tc-ppc.c (ppc_elf_validate_fix): Allow GOT and section
        relative relocations with -mrelocatable.  Also allow unfixed
        relocs in .ex_shared.

Tue May  7 11:24:10 1996  Ian Lance Taylor  <ian@cygnus.com>

        * config/obj-coff.c (yank_symbols): Check that FNAME_OFFSET is
        non-zero before assuming this is a long file name.
        (w_strings): Likewise.
        (c_dot_file_symbol): Set FNAME_OFFSET to 1 for a long file name.

        * config/obj-coff.c (w_strings): Move declaration of i inside
        #ifdef block which uses it.

Tue May  7 00:49:58 1996  Jeffrey A Law  (law@cygnus.com)

        * config/tc-h8300.c (do_a_fix_imm): Rename last argument to
        "relaxmode".  Output relocs which identify various relaxing
        possibilities for mov.[bwl] instructions.
        (build_bytes): Pass in a relaxing mode to do_a_fix_imm.

Mon May  6 15:26:28 1996  Doug Evans  <dje@canuck.cygnus.com>

        * config/tc-arm.h (TC_HANDLES_FX_DONE): Define.
        (MD_APPLY_FIX3): Define.
        * config/tc-arm.c (my_get_expression): Only watch for bad segments
        if OBJ_AOUT.
        (md_apply_fix3): Renamed from md_apply_fix.
        If pcrel reloc and symbol is in different section, undo effects
        of md_pcrel_from.

Sat May  4 12:49:35 1996  Jeffrey A Law  (law@cygnus.com)

        * config/tc-hppa.c (hppa_fix_adjustable): Don't adjust
        any reloc with an LR% or RR% field selector for SOM.

Sat May  4 11:26:19 1996  Ian Lance Taylor  <ian@cygnus.com>

        * Makefile.in: Add subsegs.h to appropriate TARG_CPU_DEP_*
        variables.

Fri May  3 17:58:31 1996  Ian Lance Taylor  <ian@cygnus.com>

        * config/obj-coff.c (coff_frob_symbol): Don't merge a symbol with
        SF_GET_STATICS set.
        (yank_symbols): Likewise.

Wed May  1 13:38:17 1996  Ian Lance Taylor  <ian@cygnus.com>

        * subsegs.h (segment_info_type): If MANY_SEGMENTS and not
        BFD_ASSEMBLER, add name field.
        * config/obj-coff.c: Include "libiberty.h".
        (coff_header_append): Handle long section names.
        (crawl_symbols): Just use the name field for the symbol name,
        without worrying about null byte termination.
        (w_strings): Handle long section names.
        (write_object_file): Likewise.  Also, use the name field, rather
        than scnhdr.s_name.
        (obj_coff_add_segment): Permit long section names.
        (obj_coff_init_stab_section): Use the name field, rather than
        scnhdr.s_name.
        (adjust_stab_section): Likewise.
        * config/te-pe.h (COFF_LONG_SECTION_NAMES): Define.

        * config/tc-i960.c (brtab_emit): Don't set fx_im_disp field.
        (mem_fmt): Likewise.
        (md_apply_fix): Don't check fx_im_disp field.

Thu Apr 25 11:39:51 1996  Ian Lance Taylor  <ian@cygnus.com>

        * configure.in: Add * after sparc*-*-vxworks.
        * configure: Rebuild.

        * app.c (do_scrub_begin): If tc_comment_chars is not defined,
        define it to comment_chars.  Use tc_comment_chars rather than
        comment_chars.
        (do_scrub_chars): Use tc_comment_chars rather than comment_chars.
        * config/tc-m68k.h (tc_comment_chars): Define.
        (m68k_comment_chars): Declare.
        * config/tc-m68k.c (m68k_comment_chars): Rename from
        comment_chars.  Change into a pointer rather than an array.
        (md_longopts): Add "bitwise-or".
        (md_parse_option): Handle OPTION_BITWISE_OR.
        (md_show_usage): Mention --bitwise-or.
        * doc/c-m68k.texi: Document --bitwise-or.

Wed Apr 24 11:28:38 1996  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-m68k.c (m68k_ip): Prevent attempts to use long offsets
        in 68000 mode.

        * config/obj-coff.c (obj_coff_section): BFD_ASSEMBLER version:
        call demand_empty_rest_of_line.  Non BFD_ASSEMBLER version:
        correct handling of input line pointer, and call
        demand_empty_rest_of_line.

Mon Apr 22 18:02:37 1996  Doug Evans  <dje@blues.cygnus.com>

        * config/tc-sparc.c (in_bitfield_range): New static function.
        (sparc_ip): New cases X,Y.  Use SPARC_OPCODE_ARCH_V9_P.
        (md_apply_fix, cases BFD_RELOC_32_PCREL_S2,
        BFD_RELOC_SPARC_{WDISP16,WDISP19}): Fix undefined code.
        (md_apply_fix): New cases BFD_RELOC_SPARC_[56].
        (tc_gen_reloc): New cases BFD_RELOC_SPARC_[56].

Thu Apr 18 18:58:33 1996  Ian Lance Taylor  <ian@cygnus.com>

        * config/obj-coff.c: BFD_ASSEMBLER:
        (coff_last_bf): New static variable.
        (coff_frob_symbol): Set endndx of a .bf symbol.
        Non BFD_ASSEMBLER:
        (obj_coff_endef): Call SF_SET_PROCESS on a .bf symbol.
        (last_bfP): New static variable.
        (yank_symbols): Set endndx of a .bf symbol.

Thu Apr 18 11:53:58 1996  Michael Meissner  <meissner@tiktok.cygnus.com>

        * config/tc-ppc.c (md_parse_option): Add support for Solaris's -le
        and -s options.  Add -be for good measure.

Wed Apr 17 12:31:01 1996  Ian Lance Taylor  <ian@cygnus.com>

        * read.c (s_space): Support non-constant fill value.  Handle fill
        value correctly for a size other than 1.

Tue Apr 16 15:17:40 1996  Doug Evans  <dje@canuck.cygnus.com>

        * config/tc-arm.c (my_get_float_expression): Update call to
        gen_to_words, X_PRECISION changed from 6 to 5.

Tue Apr 16 10:25:42 1996  Michael Meissner  <meissner@tiktok.cygnus.com>

        * config/tc-ppc.c (register_name,reg_name_search): Move register
        name lookup from PE specific code to all targets.  Add support for
        -mregnames/-mno-regnames to control whether register names are
        expanded or not.
        (md_assemble): Call register_name for all platforms.
        (md_parse_option): Add support for -mregnames/-mno-regnames.

        * configure.in (powerpcle*-*-solaris): Add support.
        (powerpc*-*-linux): Ditto.
        * configure: Regenerate.

        * config/ppc-sol.mt: New config file for PowerPC Solaris.

Mon Apr 15 12:26:33 1996  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-mips.c (mips_frob_file): Permit multiple %hi relocs to
        be associated with a single %lo reloc.

        * config/tc-mips.c (load_address): Cast X_add_number to valueT
        before comparing against MAX_GPREL_OFFSET, so that negative
        numbers are handled correctly.
        (macro): Likewise.

Thu Apr 11 12:39:02 1996  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-sparc.c (last_insn): New static variable.
        (md_assemble): Warn about putting floating point branches in a
        delay slot.  If architecture is less than v9, insert NOP
        instructions between floating point instructions and floating
        point branches.  (The SunOS assembler does both these operations.)
        Save the last instruction opcode.
        (sparc_ip): Add pinsn parameter.  Change caller.

        * config/tc-m68k.c (md_estimate_size_before_relax): Correct check
        for byte jump to next instruction to skip empty frags.

Wed Apr 10 16:48:12 1996  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-alpha.c (alpha_ip): If we are going to call emit_add64
        for addq with a 16 bit signed value, just emit a lda instruction
        instead.

Wed Apr 10 14:34:49 1996  Jeffrey A Law  (law@cygnus.com)

        * config/tc-h8300.c (do_a_fix_imm): Don't cut off high bits
        of a 32bit operand.

Mon Apr  8 14:42:53 1996  Ian Lance Taylor  <ian@cygnus.com>

        * configure.in: Permit --enable-shared to specify a list of
        directories.
        * configure: Rebuild.

Fri Apr  5 17:01:35 1996  Jeffrey A Law  (law@cygnus.com)

        * config/tc-h8300.c (get_specific): Remove some #if 0 code.
        (build_bytes): Remove all ABSMOV related code; it's unnecessary.

Fri Apr  5 15:13:10 1996  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>

        * config/atof-ieee.c: Fix handling of denormalized extended
        precision numbers and overflow/underflow detection.
        (MAX_PRECISION, X_PRECISION, P_PRECISION): Changed from 6 to 5, to
        not include the 16 bit gap in the m68k extended precision format.

Fri Apr  5 14:29:23 1996  Ian Lance Taylor  <ian@cygnus.com>

        * configure.in: Add i386-*-freebsdelf* target; from John Polstra
        <jdp@polstra.com>.
        * configure: Rebuild.

Fri Apr  5 18:39:28 1996  James G. Smith  <jsmith@cygnus.co.uk>

        * config/tc-mips.c: Allow non-zero offsets from .sdata symbols to
        be accessed using the $gp register.
        * config/tc-mips.h (MAX_GPREL_OFFSET): Added.

Wed Apr  3 10:56:14 1996  Doug Evans  <dje@canuck.cygnus.com>

        * config/tc-sparc.c (sparc_md_end): Set bfd machine number to
        bfd_mach_sparc_sparclet if current_architecture is sparclet.

Mon Apr  1 16:55:44 1996  Ian Lance Taylor  <ian@cygnus.com>

        * read.c (get_line_sb): Bump line counters based on
        input_line_pointer[-1], not *input_line_pointer.  Don't bother to
        call LISTING_NEWLINE.
        (s_macro): Don't call demand_empty_rest_of_line.
        * app.c (do_scrub_chars): When handling C style comments, unget
        ch2 rather than ch.

Fri Mar 29 16:15:06 1996  Ian Lance Taylor  <ian@cygnus.com>

        * read.h (enum linkonce_type): Define.
        (s_linkonce): Declare.
        * read.c (potable): Add "linkonce".
        (s_linkonce): New function.
        * subsegs.h (segment_info_type): Add linkonce field to
        MANY_SEGMENTS && ! BFD_ASSEMBLER section.
        * config/obj-coff.h (obj_handle_link_once): Define if TE_PE.
        (obj_coff_pe_handle_link_once): Declare if TE_PE.
        * config/obj-coff.c: If TE_PE and not BFD_ASSEMBLER, #include
        "coff/pe.h".
        (obj_coff_pe_handle_link_once): New function, defined if TE_PE.
        (c_section_symbol): If TE_PE, set the x_comdat field in the aux
        entry based on the linkonce field in segment_info.
        * doc/as.texinfo: Document .linkonce.

Fri Mar 29 11:31:27 1996  J.T. Conklin  (jtc@lisa.cygnus.com)

        * doc/as.1: Changed to be recognized by catman -w on Solaris.

Thu Mar 28 15:27:47 1996  Ian Lance Taylor  <ian@cygnus.com>

        * stabs.c (s_stab_generic): Call the listing functions before
        doing the rest of the processing, which may involve freeing the
        string.  Pass string, not string + stroff, to OBJ_PROCESS_STAB in
        SEPARATE_STAB_SECTIONS case.

        * config/tc-hppa.c: Remove nested comment.
        (tc_gen_reloc): Move label done inside the ifdef in which it is
        used.
        (md_apply_fix): Pass pointers to correct types to libhppa.h
        functions.  Always return a value.

        * config/tc-mips.h (tc_frob_file): Define.
        (mips_frob_file): Declare.
        * config/tc-mips.c (struct mips_hi_fixup): Define.
        (mips_hi_fixup_list): New static variable.
        (imm_unmatched_hi): New static variable.
        (md_assemble): Clear imm_reloc, imm_unmatched_hi, and
        offset_reloc.  Pass imm_unmatched_hi to append_insn.
        (append_insn): Add unmatched_hi parameter.  If it is set, add the
        new fixup to mips_hi_fixup_list.  Change all callers.
        (mips_ip): Set imm_unmatched_hi when appropriate.
        (mips_frob_file): New function.

Thu Mar 28 11:47:59 1996  Doug Evans  <dje@canuck.cygnus.com>

        * configure.in (sparc-*-solaris2*): Renamed from sparc*-*-solaris2*.
        * configure: Regenerated.

Tue Mar 26 18:19:12 1996  Ian Lance Taylor  <ian@cygnus.com>

        * as.c (main): Call bfd_set_error_program_name.

Fri Mar 22 11:13:00 1996  Ian Lance Taylor  <ian@cygnus.com>

        * as.h (strdup): Don't declare.
        * stabs.c: Include libiberty.h
        (get_stab_string_offset): Use xstrdup rather than strdup.
        (s_stab_generic): Likewise.
        * as.c (parse_args): Likewise.
        * read.c (s_mri_sect): Likewise.

        * gasp.c (change_base): Recognize \(...) construct documented to
        pass through enclosed characters literally through to the output.
        (process_assigns): Likewise.  Also, be more careful to avoid
        looking past the end of the buffer.

Thu Mar 21 13:18:43 1996  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-i386.c (md_parse_option): If OBJ_ELF, ignore -k for
        FreeBSD compatibility.  From John Polstra <jdp@polstra.com>.

Wed Mar 20 18:13:32 1996  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>

        * doc/as.texinfo, doc/c-i960.texi: Fix typos.

Wed Mar 20 17:05:16 1996  David Mosberger-Tang  <davidm@azstarnet.com>

        * config/alpha-opcode.h: Added cvtst instruction.

Mon Mar 18 13:12:46 1996  Ian Lance Taylor  <ian@cygnus.com>

        * ecoff.c (ecoff_stab): Don't try to make a symbol out of the stab
        string.  Extract the addend from the result of expression.

Fri Mar 15 17:10:43 1996  Ian Lance Taylor  <ian@cygnus.com>

        * app.c (do_scrub_chars): If whitespace is seen in state 11, and
        LABELS_WITHOUT_COLONS is not defined, and we are not in m68k MRI
        mode, change the state to 3 rather than 1.

Thu Mar 14 18:18:25 1996  Ian Lance Taylor  <ian@cygnus.com>

        * config/obj-coff.h (C_REGISTER_SECTION): Change from 20 to 50, to
        correspond to 11 March change.

Thu Mar 14 15:27:10 1996  Jeffrey A Law  (law@cygnus.com)

        * config/tc-h8300.c (build_bytes, MEMIND case): Generate
        an R_MEM_INDIRECT reloc rather than R_RELBYTE.

Tue Mar 12 12:21:10 1996  Ian Lance Taylor  <ian@cygnus.com>

        * configure: Rebuild with autoconf 2.8.

Mon Mar 11 18:57:12 1996  Ian Lance Taylor  <ian@cygnus.com>

        * config/atof-ieee.c (gen_to_words): Improve handling of
        X_PRECISION numbers.  Based on patches from Andreas Schwab
        <schwab@issan.informatik.uni-dortmund.de>.

Mon Mar 11 09:59:53 1996  Steve Chamberlain  <sac@slash.cygnus.com>

        * as.h (SEG_NORMAL, SEG_LIST): Bump segment limit from 10 to 40.
        (SEG_LAST): New.
        * subsegs.c (MANY_SEGMENTS): Increase segment limit.
        * obj-coff.c (seg_N_TYPE, seg_info_off_by_4): Likewise.
        (do_relocs_for, w_symbols, obj_coff_add_segment, do_linenos_for,
        crawl_symbols, coff_header_append): Loop to SEG_LAST rather than
        SEG_E9.
        
Thu Mar  7 15:17:39 1996  Doug Evans  <dje@charmed.cygnus.com>

        * config/tc-sparc.c (sparc_ip): Handle operand char 'O' (neg reg).

Thu Mar  7 09:19:15 1996  Jeffrey A Law  (law@cygnus.com)

        * config/tc-hppa.c (SUBSEG_MILLI): Define.
        (pa_def_subspaces): Add $MILLICODE$.
        (pa_spaces_begin): Set section flags for $MILLICODE$.

Wed Mar  6 14:11:30 1996  Ian Lance Taylor  <ian@cygnus.com>

        * config/obj-elf.c (obj_elf_section): Only SEC_LOAD if the type is
        not SHT_NOBITS.  Don't tamper with flags based on type if a
        special section was found (revert Feb 29 change).

        * config/tc-sh.c (sh_do_align): Only align using the nop pattern
        if aligning to a longword boundary or greater.

Tue Mar  5 15:10:43 1996  Jim Wilson  <wilson@chestnut.cygnus.com>

        * config/tc-sh.c (sh_do_align): Pass 1 not 2 to frag_align.

Mon Mar  4 20:50:57 1996  Steve Chamberlain  <sac@slash.cygnus.com>

        * configure.in (i386-*-cygwin32): Don't use bfd_gas.
        * configure: Regenerated.

Mon Mar  4 10:13:06 1996  Jeffrey A Law  (law@cygnus.com)

        * config/tc-hppa.c: Add default definitions for R_N0SEL and
        R_N1SEL since they're not defined for old versions of hpux.

        * config/tc-hppa.c (tc_gen_reloc): Fix typo in R_COMP2 code.
        Set "sym_ptr_ptr" and "addend" fields to dummy values for
        R_N0SEL and R_N1SEL.

Fri Mar  1 10:20:52 1996  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>

        * flonum-konst.c: Add two more constants for 1e+-2048 and
        1e+-4096, and correct the other constants.

        * symbols.c (resolve_symbol_value): Handle O_logical_not.

Thu Feb 29 13:58:35 1996  Michael Meissner  <meissner@tiktok.cygnus.com>

        * config/obj-elf.c (obj_elf_section): Allow predefined section
        types to set the nobits type.  Avoid a shadowed declaration.

Wed Feb 28 15:38:56 1996  Jeffrey A Law  (law@cygnus.com)

        * config/tc-hppa.c (hppa_fix_adjustable): For SOM, don't
        reduce relocs using e_nlrsel field selectors.

        * write.c (fix_new_exp): Don't use #elif.  Some compilers
        don't handle it.

        * config/tc-hppa.c (selector_table): Add "n", "nl", and "nlr" to
        the selector table.
        (pa_chk_field_selector): Handle new field selectors for SOM.

Tue Feb 27 14:42:27 1996  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>

        * configure.in (m68k-*-linux*aout*, m68k-*-linux*): New targets.
        * configure: Rebuild.
        * config/te-linux.h (LOCAL_LABELS_FB): Define.
        * config/tc-m68k.h (TARGET_FORMAT) [TE_LINUX]: Define to
        "a.out-m68k-linux".
        * config/tc-m68k.c (comment_chars): Don't include '#' if TE_LINUX
        is defined.

Mon Feb 26 18:58:58 1996  Stan Shebs  <shebs@andros.cygnus.com>

        * mpw-make.sed: Update to handle shared library support.

Mon Feb 26 10:34:10 1996  Doug Evans  <dje@charmed.cygnus.com>

        * config/tc-sparc.c (sparc_ip): Print all architectures that support
        the insn on mismatch.

Fri Feb 23 21:44:39 1996  Rob Savoye  <rob@chinadoll.cygnus.com>

        * configure.in: Add support for a29-coff.
        * configure: Rebuild.

Thu Feb 22 16:39:43 1996  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-sh.c (sh_coff_frob_file): Don't consider the address
        of the section when looking for the R_SH_USES fixup, because the
        frag addresses have not yet been adjusted.

        * gdbinit.in: Set a breakpoint on as_warn_where.

        * config/tc-mips.c (macro): Add missing arguments to macro_build
        omitted in last change.  From Jim Wilson <wilson@cygnus.com>.

Wed Feb 21 17:00:32 1996  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-h8300.c (tc_reloc_mangle): Change reloc based on size
        if it is TC_CONS_RELOC.  Set a size of 4 to R_RELLONG.

Wed Feb 21 09:25:39 1996  Doug Evans  <dje@charmed.cygnus.com>

        * config/tc-sparc.c (sparc_ip): Recognize %asr0 for v8.

Tue Feb 20 21:48:03 1996  Doug Evans  <dje@charmed.cygnus.com>

        * config/tc-sparc.c (parse_keyword_arg): Accept leading '%'.
        (sparc_ip): Accept %asr[1..31] for v8 and %asr[%16..31] for v9.
        Recognize [uU] format args as sparclet cpregs.

Tue Feb 20 22:25:55 1996  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-sh.c (sh_handle_align): Don't emit R_SH_ALIGN relocs
        in bss_section.

Mon Feb 19 14:16:24 1996  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-sparc.h (TC_RELOC_RTSYM_LOC_FIXUP): Check S_IS_WEAK as
        well as S_IS_EXTERNAL.
        (tc_fix_adjustable): Likewise.
        * config/tc-sparc.c (md_apply_fix): In OBJ_ELF case, check for
        S_IS_WEAK as well as S_IS_EXTERNAL when deciding whether to return
        early.
        (tc_gen_reloc): Check S_IS_WEAK as wel as S_IS_EXTERNAL when
        deciding whether to convert BFD_RELOC_32_PCREL_S2 if PIC.

Mon Feb 19 02:15:57 1996  Doug Evans  <dje@charmed.cygnus.com>

        * config/tc-sparc.c (max_architecture): Change to sparclite for
        32 bit arch.
        (default_compatible): Delete.
        (sparc_ffs): New function.
        (md_begin): Only call SPARC_OPCODE_CONFLICT_P once.
        (sparc_ip): Rewrite architecture match and bump logic.

Sun Feb 18 15:03:50 1996  Ian Lance Taylor  <ian@cygnus.com>

        * configure.in: Check for 'do not mix' from native linker before
        trying to use -rpath.
        * configure: Rebuild.

Fri Feb 16 16:53:31 1996  Ian Lance Taylor  <ian@cygnus.com>

        * config/obj-coff.h (SF_ADJ_LNNOPTR): Define (non BFD_ASSEMBLER).
        (SF_GET_ADJ_LNNOPTR): Define (non BFD_ASSEMBLER).
        (SF_SET_ADJ_LNNOPTR): Define (non BFD_ASSEMBLER).
        * config/obj-coff.c (obj_coff_endef): Set ADJ_LNNOPTR when LNNOPTR
        is set.
        (w_symbols): If ADJ_LNNOPTR is set, add the section lnnoptr field
        to the symbol lnnoptr field, to get the correct file offset.

Thu Feb 15 14:48:38 1996  Michael Meissner  <meissner@tiktok.cygnus.com>

        * config/obj-elf.c (elf_frob_symbol): On the PowerPC, force all
        symbols that are not function, file, or section symbols to be
        object types.

Thu Feb 15 11:20:18 1996  Ian Lance Taylor  <ian@cygnus.com>

        * configure: Set and substitute RPATH_ENVVAR.
        * configure: Rebuild.
        * Makefile.in (RPATH_ENVVAR): New variable.
        (check): Use $(RPATH_ENVVAR) rather than LD_LIBRARY_PATH.

        * configure.in: Accept i686.  From H.J. Lu <hjl@zoom.com>: i386
        doesn't need opcodes.  If configuring shared, opcodes needs bfd.
        * configure: Rebuild.

Wed Feb 14 16:33:12 1996  Martin Anantharaman  <martin@mail.imech.uni-duisburg.de>

        * read.c (s_mri_sect): Don't return '\0' in type.  Set all
        appropriate flags in BFD section.

        * configure.in (m68k-*-psos*): New target.
        * configure: Rebuild.
        * config/te-psos.h: New file.
        * config/tc-m68k.c (comment_chars): Don't include '#' if TE_PSOS
        is defined.

Wed Feb 14 13:43:24 1996  Ian Lance Taylor  <ian@cygnus.com>

        From Alan Modra <alan@spri.levels.unisa.edu.au>:
        * configure.in: Remove duplicate setting of cpu_type.  Check
        whether opcodes library is required for on all targets, not just
        primary one.
        * configure: Rebuild.

        * config/tc-mips.c (mips_big_got): New static variable.
        (s_extern): Don't declare.
        (reg_needs_delay): New static function.
        (macro_build): Permit GOT/CALL_HI/LO relocs.
        (macro_build_lui): If place is not NULL, use the number in the
        expression.
        (load_address): Handle mips_big_got case.
        (macro): Handle mips_big_got for M_LA_AB, M_JAL_A, and load and
        store macros.
        (OPTION_XGOT): Define.
        (md_longopts): Add "xgot" if OBJ_ELF.
        (md_parse_option): Handle -xgot.
        (md_show_usage): Mention -xgot.
        (md_apply_fix): Permit GOT/CALL_HI/LO relocs.
        (tc_gen_reloc): Handle GOT/CALL_HI/LO relocs.

Wed Feb 14 11:22:27 1996  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>

        * config/tc-m68k.c (m68k_ip) [operand kind '#']: When fixing
        the byte relocation, point it to the low byte of the word.

Tue Feb 13 15:31:18 1996  Ian Lance Taylor  <ian@cygnus.com>

        * configure.in: Set HDLFLAGS for *-*-hpux with --enable-shared.
        * configure: Rebuild.

Mon Feb 12 15:53:46 1996  Doug Evans  <dje@charmed.cygnus.com>

        * configure.in: Recognize any sparc* cpu.
        * configure: Regenerated.

Mon Feb 12 15:41:21 1996  Ian Lance Taylor  <ian@cygnus.com>

        * read.c (potable): Add "mri" and ".mri".
        (s_mri): New function.
        * read.h (s_mri): Declare.
        * app.c (scrub_m68k_mri): New static variable.
        (mri_pseudo): New static variable.
        (do_scrub_begin): Add m68k_mri parameter.  Use it rather than
        flag_m68k_mri.  Initialize scrub_m68k_mri.
        (mri_state, mri_last_ch): New static variables.
        (struct app_save): Add scrub_m68k_mri, mri_state, and mri_last_ch
        fields.
        (app_push): Save new fields.
        (app_pop): Restore new fields.
        (do_scrub_chars): Check scrub_m68k_mri rather than flag_mri_mri.
        If TC_M68K, use a trivial state machine to look for occurrences of
        the .mri pseudo-op, and change the mode appropriately.
        * as.h (do_scrub_begin): Update prototype.
        * input-scrub.c (input_scrub_begin): Pass flag_m68k_mri to
        do_scrub_begin.
        * config/tc-m68k.c (reg_prefix_optional_seen): New static
        variable.
        (m68k_mri_mode_change): New function.
        (md_parse_option): Set reg_prefix_optional_seen.
        * config/tc-m68k.h (m68k_mri_mode_change): Declare.
        (MRI_MODE_CHANGE): Define.
        * doc/as.texinfo: Document .mri pseudo-op.

        * app.c (do_scrub_chars): In MRI mode, don't treat '#' as a
        comment character.

Mon Feb 12 15:16:29 1996  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>

        Support for OBJ_ELF on m68k, mostly inside #ifdef OBJ_ELF:
        * config/m68k-parse.h (enum pic_relocation): Define.
        (struct m68k_exp): Add pic_reloc field.
        * config/tc-m68k.h (TC_RELOC_RTSYM_LOC_FIXUP): Define.
        (tc_fix_adjustable): Define to call tc_m68k_fix_adjustable.
        (NO_RELOC): Define to BFD_RELOC_NONE if BFD_ASSEMBLER, to zero
        otherwise.
        * config/tc-m68k.c: Delete definition of NO_RELOC.
        (struct m68k_it): Add pic_reloc field.
        (add_fix): Copy over pic_reloc field.
        (md_pseudo_table): Interpret .align parameter as byte count.
        (mote_pseudo_table): Likewise.
        (tc_m68k_fix_adjustable): New function.
        (get_reloc_code): New function.
        (md_assemble): Use it as last argument to fix_new_exp.
        (md_apply_fix_2): For a relocation against a symbol don't put the
        addend into the data.
        (tc_gen_reloc): Different addend computation for OBJ_ELF.
        (m68k_ip): Don't relax an operand that requires pic relocation.
        (md_begin): Align .text, .data and .bss on 4 byte boundary by
        default.
        * write.c (fixup_segment): Don't add symbol value to addend if
        TC_M68K and OBJ_ELF.
        * config/m68k-parse.y (yylex): Handle @PLTPC, etc.
        (motorola_operand): Add rule for `(zapc, EXPR)'.

Mon Feb 12 10:07:33 1996  David Mosberger-Tang  <davidm@azstarnet.com>

        * ecoff.c (ecoff_directive_weakext): Fixed so that whitespace
        *really* is permissible before the comma.

Mon Feb 12 00:12:13 1996  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-sh.c (sh_do_align): Align to a 2 byte boundary before
        inserting nop instructions.

Fri Feb  9 10:54:19 1996  Ian Lance Taylor  <ian@cygnus.com>

        * config/te-aux.h: Change include of aux.h to aux-coff.h.

Thu Feb  8 20:02:58 1996  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-i960.c (tc_coff_symbol_emit_hook): Correct storage
        class setting for a CALLNAME symbol in COFF.

        * read.c (potable): Pass negative numbers for new .balign[wl] and
        .p2align[wl] pseudo-ops.
        (s_align_bytes): Treat a negative argument as specifying the fill
        length.
        (s_align_ptwo): Likewise.

Wed Feb  7 14:12:03 1996  Ian Lance Taylor  <ian@cygnus.com>

        * read.c (potable): Add balignw, balignl, p2alignw, and p2alignl.
        (do_align): Take new len parameter.  Change all callers.  Pass it
        to md_do_align.
        (s_align_bytes): Arg now indicates the length of the fill pattern.
        (s_align_ptwo): Likewise.
        * config/obj-coff.c (write_object_file): Pass length to
        md_do_align.
        * config/tc-i386.h (md_do_align): Take new len parameter.
        * config/tc-m88k.h (md_do_align): Likewise.
        * config/tc-m88k.c (m88k_do_align): Likewise.
        * config/tc-sh.h (md_do_align): Likewise.
        * config/tc-sh.c (sh_do_align): Likewise.
        * doc/as.texinfo: Document new pseudo-ops.

        * config/obj-coff.c (fixup_mdeps): Divide offset by fr_var, as is
        done in cvt_frag_to_fill.

        * config/tc-sh.h (sh_do_align): Declare.
        (md_do_align): Define.
        * config/tc-sh.c (sh_do_align): New function.

        * ecoff.c (ecoff_build_lineno): Don't try to store the address
        difference if the next address is before the current one.

        * config/tc-m68k.c (struct m68k_cpu): Add alias field.
        (archs): Initialize new field.
        (m68k_ip): Don't list alias names when listing CPUs which support
        an instruction.

        * as.c (main): Call parse_args before read_begin.
        * app.c (do_scrub_chars): If flag_m68k_mri, don't put a dot in
        front of generated pseudo-ops.
        * read.c (potable): Ignore "name".
        (s_app_file): Permit a single quote after the string, since one
        may appear in m68k MRI mode.

        * configure.in: Check for --enable-shared.  If linking against
        shared BFD and opcodes, fix library name on SunOS, and try to set
        -rpath reasonably.
        * configure: Rebuild.

Tue Feb  6 15:16:17 1996  Ian Lance Taylor  <ian@cygnus.com>

        * as.h (flag_m68k_mri): Declare.
        * as.c (parse_args): If TC_M68K, set flag_m68k_mri for -M.
        * Many files: For MRI syntax that is specific to the m68k MRI
        assembler, check flag_m68k_mri rather than flag_mri or
        MRI_MODE_NEEDS_PSEUDO_DOT.

Mon Feb  5 16:29:11 1996  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-i960.c (ARCH_HX): Define.
        (arch_tab): Add HX.
        (targ_has_sfr): Handle ARCH_HX.
        (targ_has_iclass): Handle ARCH_HX.
        (tc_coff_fix2rtype): Add return 0 to avoid warning.
        (tc_headers_hook): If the architecture was specified explicitly,
        use it when setting the flags.  Set the extern variable coff_flags
        rather than headers->filehdr.f_flags, since the latter is set
        unconditionally in obj-coff.c.
        (i960_handle_align): Remove unused variable fixp.

        Support for building bfd and opcodes as shared libraries, based on
        patches from Alan Modra <alan@spri.levels.unisa.edu.au>:
        * configure.in: Set OPCODES and BFD to search directories.
        Substitute OPCODES_DEP and BFDDEP.  On SunOS, set HLDFLAGS.
        * configure: Rebuild.
        * Makefile.in (LDFLAGS, HLDFLAGS): New variables.
        (LIBDEPS): New variable.
        (as.new0: Depend upon $(LIBDEPS) rather than $(LIBS).  Use
        $(HLDFLAGS) in link.
        (check): Set LD_LIBRARY_PATH in the environment.

Fri Feb  2 17:41:53 1996  Michael Meissner  <meissner@wogglebug.tiac.net>

        * config/tc-ppc.h (ELF_TC_SPECIAL_SECTIONS): Make .sdata2, .sbss2,
        .PPC.EMB.sdata0, and .PPC.EMB.sbss0 sections all default to
        read-only, not read/write.

Fri Feb  2 14:09:25 1996  Alan Modra  <alan@spri.levels.unisa.edu.au>

        * Makefile.in (INSTALL_XFORM): Remove -e.

Fri Feb  2 12:32:15 1996  Ian Lance Taylor  <ian@cygnus.com>

        * write.c (write_relocs): Use S_IS_DEFINED and S_IS_COMMON rather
        than comparing S_GET_SEGMENT to undefined_section.
        (write_object_file): Skip symbols which were equated to an
        undefined or common symbol.
        * symbols.c (resolve_symbol_value): Use S_IS_DEFINED and
        S_IS_COMMON rather than comparing S_GET_SEGMENT to
        undefined_section.
        (S_GET_VALUE): Likewise.  Avoid recursion problems if S_IS_DEFINED
        or S_IS_COMMON call S_GET_VALUE.
        * config/obj-aout.h (S_IS_COMMON): Define if not BFD_ASSEMBLER.
        * config/obj-aout.c (obj_emit_relocations): If a reloc is equated
        to an undefined or common symbol, convert the reloc to be against
        the target symbol.
        (obj_crawl_symbol_chain): Skip symbols which were equated to an
        undefined or common symbol.
        * config/obj-bout.h (S_IS_COMMON): Define if not BFD_ASSEMBLER.
        * config/obj-bout.c (obj_emit_relocations): If a reloc is equated
        to an undefined or common symbol, convert the reloc to be against
        the target symbol.
        (obj_crawl_symbol_chain): Skip symbols which were equated to an
        undefined or common symbol.
        * config/obj-coff.c (do_relocs_for): Use S_IS_DEFINED and
        S_IS_COMMON rather than comparing S_GET_SEGMENT to
        undefined_section.
        (yank_symbols): Skip symbols which were equated to an undefined or
        common symbol.

Thu Feb  1 15:34:32 1996  Ian Lance Taylor  <ian@cygnus.com>

        * config/obj-aout.h (S_IS_LOCAL): Check for \002 as well as \001.
        * config/obj-bout.h (S_IS_LOCAL): Likewise.

        * configure.in: Make sure we only add m68k-parse.o to
        ${extra_objects} once, no matter how many m68k targets have been
        enabled.
        * configure: Rebuild.

Wed Jan 31 18:31:46 1996  Steve Chamberlain  <sac@slash.cygnus.com>

        * configure.in (i386-*-cygwin32, ppc-*-cygwin32): New.
        * configure: Rebuild.

Wed Jan 31 14:03:17 1996  Richard Henderson  <rth@tamu.edu>

        * config/tc-m68k.c (md_pseudo_table): Add "extend" and "ldouble".
        * doc/c-m68k.texi: Document .extend and .ldouble.

        * configure.in (m68*-apple-aux*): New target.
        * config/te-aux.h: New file.
        * config/obj-coff.c (compare_external_relocs): New static function
        if TE_AUX.
        (do_relocs_for): Sort relocs if TE_AUX.
        (fixup_segment): If TE_AUX, store common symbol value in segment.
        * config/tc-m68k.h (TARGET_FORMAT): Define if TE_AUX.

Wed Jan 31 12:24:58 1996  Ian Lance Taylor  <ian@cygnus.com>

        * config/obj-coff.h (S_IS_LOCAL): Check for \002 as well as \001.

        * config/tc-mips.c (s_mips_globl): Set BSF_OBJECT if it is not
        BSF_FUNCTION.
        (s_cpload): Set BSF_OBJECT for _gp_disp symbol.
        * read.c (s_lcomm): If S_SET_SIZE is defined, set the size of the
        symbol.
        * ecoff.c (add_procedure): Set the BSF_FUNCTION flag.
        (ecoff_build_symbols): If S_SET_SIZE is defined, set the size of
        an undefined symbol and the size of a function symbol.
        * config/obj-elf.c (elf_frob_symbol): If TC_MIPS, set BSF_OBJECT
        for all common symbols.

Tue Jan 30 12:35:24 1996  Ken Raeburn  <raeburn@cygnus.com>

        * config/tc-i960.c (parse_memop): In MRI mode, don't use implicit
        scaling of index.

        * expr.c (operand): Accept 0x hex constants in MRI mode if not on
        m68k.

Mon Jan 29 12:21:30 1996  Ian Lance Taylor  <ian@cygnus.com>

        * config/obj-elf.c (obj_elf_type): Set BSF_OBJECT flag for a type
        of object.  From Ronald F. Guilmette <rfg@monkeys.com>.

        * ecoff.c (localsym_t): Add addend field.
        (add_ecoff_symbol): Add addend argument.  Change all callers.
        (coff_sym_value): Make static.
        (coff_sym_addend): New static variable.
        (ecoff_directive_def): Initialize coff_sym_addend.
        (ecoff_directive_val): Accept symbol + constant.
        (ecoff_directive_endef): Pass coff_sym_addend to add_ecoff_symbol.
        (ecoff_build_symbols): Include the addend in the symbol value.

Fri Jan 26 19:28:52 1996  Kim Knuttila  <krk@cygnus.com>

        * config/tc-ppc.c (md_assemble): Ignore overflow on 
        BFD_RELOC_16_GOTOFF and BFD_RELOC_PPC_TOC16.

Fri Jan 26 16:14:17 1996  Michael Meissner  <meissner@tiktok.cygnus.com>

        * config/tc-ppc.c (md_apply_fix3): SDA21 relocations are now 4
        bytes in size, so offset appropriately in big endian mode when
        writing the bottom 2 bytes.

Thu Jan 25 20:26:23 1996  Doug Evans  <dje@charmed.cygnus.com>

        * config/tc-sparc.c (default_compatible): New static local.
        (md_begin): Initialize it.  Rewrite warn_on_bump handling.
        (sparc_ip): If no architecture or -bump specified, don't mark as
        mismatched those in default_compatible.

Thu Jan 25 12:21:53 1996  Ian Lance Taylor  <ian@cygnus.com>

        SCO ELF support from Robert Lipe <robertl@arnet.com>:
        * configure.in (i386-*-sco*elf*): Use fmt elf, targ sco5.
        * configure: Rebuild.
        * config/sco5.mt: New file; set TDEFINES to -DSCO_ELF.
        * config/tc-i386.c (sco_id): New function, if SCO_ELF.
        * config/tc-i386.h (tc_init_after_args): Define if SCO_ELF.
        (sco_id): Declare if SCO_ELF.

Thu Jan 25 03:10:53 1996  Doug Evans  <dje@charmed.cygnus.com>

        * config/tc-sparc.c (initial_architecture,can_bump_v9_p): Deleted.
        ({max,warn_after}_architecture): New static locals.
        (md_begin): Replace NUMOPCODES with sparc_num_opcodes.
        If both architecture and -bump requested, set max_architecture to max.
        (sparc_md_end): Simplify.
        (sparc_ip): Replace references to can_bump_v9_p with max_architecture.
        Rewrite code to bump architecture and check for conflicts.
        (md_longopts): Recognize -xarch={v8plus,v8plusa} for compatibility
        with Solaris assembler.
        (md_parse_option): Likewise.  Call sparc_opcode_lookup_arch.
        (md_show_usage): Update.

Wed Jan 24 22:11:03 1996  Doug Evans  <dje@charmed.cygnus.com>

        * Makefile.in (RUNTEST): Fix reference to $${srcdir}.

Mon Jan 22 09:21:36 1996  Doug Evans  <dje@charmed.cygnus.com>

        * config/tc-sparc.h (TARGET_FORMAT): Use #ifdef SPARC_ARCH64 instead of
        #ifdef sparcv9 when choosing value.
        (ENV64): Delete.
        (md_end): Define.
        (sparc_md_end): Declare.
        * config/tc-sparc.c (SPARC_V9): Renamed from sparcv9.
        (initial_architecture): New static local.
        (can_bump_v9_p): Likewise.
        (NO_V9): Delete all occurrences.
        (sparc_md_end): New function.
        (sparc_ip): New local v9_arg_p.  Rework fp reg number test.
        Don't bump architecture to v9 unless can_bump_v9_p set.
        (md_parse_option): -A<arch> passed, set can_bump_v9_p accordingly.
        * configure.in (sparc64 target cpu): Don't set obj_format here.
        (SPARC_V9): Renamed from sparcv9.
        (sparc64-*-elf*): Define SPARC_ARCH64.
        * configure: Regenerated.
        * acconfig.h (SPARC_V9): Renamed from sparcv9.
        (SPARC_ARCH64): Add.
        * conf.in: Regenerated.
        * config/vmsconf.h: Update.

Mon Jan 22 17:24:47 1996  James G. Smith  <jsmith@cygnus.co.uk>

        * config/tc-mips.c (load_register): Optimise "dli" loads.
        (md_show_usage): add "-mcpu=vr4100" to help text.

Mon Jan 22 11:53:00 1996  Ian Lance Taylor  <ian@cygnus.com>

        * symbols.c (resolve_symbol_value): If a symbol is equated to an
        undefined symbol, preserve the X_op of O_symbol.
        (S_GET_VALUE): Fix check to permit this case.
        * write.c (write_relocs): If a reloc is against an undefined
        symbol equated to another symbol, change the reloc to be against
        the latter symbol.
        * config/obj-coff.c (do_relocs_for): Likewise.

        * config/tc-ppc.c (ppc_csect): An unnamed csect is storage class
        XMC_PR.

Mon Jan 22 10:59:48 1996  Michael Meissner  <meissner@tiktok.cygnus.com>

        * config/obj-elf.c (elf/ppc.h): Include elf/ppc.h if target
        computer is PowerPC.

        * config/tc-ppc.c (md_apply_fix3): Add more embedded relocations.

        * config/tc-ppc.h (ELF_TC_SPECIAL_SECTIONS): Add sections
        mentioned in the eabi.

Thu Jan 18 17:58:19 1996  Kim Knuttila  <krk@cygnus.com>

        * config/tc-ppc.c (ppc_reldata): Changed alignement on reldata_section
        * config/tc-ppc.c (ppc_pdata): Changed the alignment on pdata_section

Mon Jan 15 17:43:42 1996  Michael Meissner  <meissner@tiktok.cygnus.com>

        * config/tc-ppc.c (mapping): Add more relocation suffixes.

Sun Jan 14 21:29:36 1996  Michael Meissner  <meissner@tiktok.cygnus.com>

        * config/tc-ppc.c (ppc_elf_validate_fix): Allow .gcc_except_table
        as a section it is ok to have unadorned -mrelocatable pointers in.

Sat Jan 13 11:09:08 1996  Michael Meissner  <meissner@tiktok.cygnus.com>

        * config/tc-ppc.c (ppc_section*): Wrap these functions inside
        #ifdef OBJ_ELF.

Fri Jan 12 15:32:07 1996  Michael Meissner  <meissner@tiktok.cygnus.com>

        * config/obj-elf.c (obj_elf_section): Add hooks so machine
        dependent section attributes can be handled.

        * config/tc-ppc.h: (md_elf_section_{letter,type,word,flags}): New
        macros to add support for exclude section flag and ordered section
        type.

        * config/tc-ppc.c (ppc_elf_section_{letter,type,word,flags}): New
        functions to add support for exclude section flag and ordered
        section type.

Fri Jan 12 12:04:00 1996  Ian Lance Taylor  <ian@cygnus.com>

        * subsegs.c (section_symbol): Don't try to look up the section
        symbol in the hash table.  It should be possible to have a symbol
        with the same name as a section, but no connection to it.

        * read.c (cons_worker): Only call mri_comment_end from flag_mri.
        From James Carlson <carlson@xylogics.com>.

        * expr.c (operand): Skip whitespace after a close parenthesis.
        From James Carlson <carlson@xylogics.com>.

Tue Jan  2 12:43:23 1996  Jim Wilson  <wilson@chestnut.cygnus.com>

        * config/tc-sh.c (md_apply_fix): Call as_bad_where instead of
        as_warn_where for relocation overflow.
        (parse_reg): Accept register name only if next character is
        not alphanumeric.

Sat Dec 30 23:42:51 1995  Jeffrey A Law  (law@cygnus.com)

        * ecoff.c (ecoff_stab): Simplify.  Correctly handle sym + offset
        addresses for static variables.

Thu Dec 21 12:54:32 1995  Michael Meissner  <meissner@tiktok.cygnus.com>

        * config/tc-ppc.c (mapping): Make @got give a real GOT relocation,
        and xgot give the old toc16 relocation.
        (md_apply_fix3): Support all GOT relocations.

Wed Dec 20 14:57:17 1995  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-mips.c (load_address): Correctly handle a constant in
        SVR4_PIC case.  From Richard Kenner <kenner@vlsi1.ultra.nyu.edu>.

Fri Dec 15 14:25:07 1995  J.T. Conklin  <jtc@rtl.cygnus.com>

        * config/tc-sh.c (parse_reg): Recognize SH3 registers.
        (get_specific): Handle A_SSR, A_SPC and A_REG_B.
        (build_Mbytes): Handle REG_B.

Fri Dec 15 16:07:25 1995  Ian Lance Taylor  <ian@cygnus.com>

        * ecoff.c (ecoff_build_aux): Use new bfd_big_endian macro.

Fri Dec 15 12:11:48 1995  Raymond Jou  <rjou@mexican.cygnus.com>

        * mpw-make.sed: If linking, edit ALL_CFLAGS to CFLAGS.

Thu Dec 14 15:09:52 1995  Ian Lance Taylor  <ian@cygnus.com>

        * config/obj-coff.c (write_object_file): Set the s_align field to
        the number of bytes, rather than to the power of 2.

Tue Dec 12 12:19:37 1995  Ian Lance Taylor  <ian@cygnus.com>

        * Makefile.in (DISTCLEAN_HERE): New variable.
        (distclean): Use it.
        (maintainer-clean): Depend upon clean-here rather than clean,
        distclean, and clean-info.  Run make maintainer-clean in doc.
        Remove files listed in DISTCLEAN_HERE.
        * doc/Makefile.in (maintainer-clean realclean): Split out from
        distclean.  Depend upon clean-info and distclean.

Mon Dec 11 16:23:51 1995  Stan Shebs  <shebs@andros.cygnus.com>

        * mac-as.r: Fix copyright and version strings.
        (cfrg): Use PROG_NAME instead of literal name.

Mon Dec 11 14:14:08 1995  Ian Lance Taylor  <ian@cygnus.com>

        * read.c (read_a_source_file): If tc_unrecognized_line is defined,
        call it.
        * config/tc-a29k.h (tc_unrecognized_line): Define.
        * config/tc-a29k.c (a29k_unrecognized_line): New function.
        (md_operand): Handle a29k style local dollar labels.

Wed Dec  6 17:52:52 1995  Ian Lance Taylor  <ian@cygnus.com>

        * config/obj-multi.h: If OBJ_MAYBE_ELF, define OBJ_SYMFIELD_TYPE.

Tue Dec  5 13:26:34 1995  Ken Raeburn  <raeburn@cygnus.com>

        * read.c (s_fill): If md_flush_pending_output is defined, call
        it.

Mon Dec  4 15:10:53 1995  Ken Raeburn  <raeburn@cygnus.com>

        * config/obj-coff.c (size_section, fill_section, fixup_mdeps):
        Treat rs_align_code like rs_align.

Sun Dec  3 16:46:54 1995  Richard Earnshaw (rearnsha@armltd.co.uk)

        * config/tc-arm.c (cp_address_required_here): Set pre_inc when
        converting an absolute address into a PC-relative one.

Fri Dec  1 11:57:56 1995  Stan Shebs  <shebs@andros.cygnus.com>

        * mpw-config.in: Don't always use te-generic.h for emulation.
        (powerpc-apple-macos): Use emulation te-macos.h.
        * mpw-make.sed (install, install-only): Edit in Mac-specific
        install procedure.

Fri Dec  1 10:59:25 1995  Ian Lance Taylor  <ian@cygnus.com>

        * configure.in: Improve message about unsupported ELF targets.
        * configure: Rebuild.

        * config/tc-m88k.c (m88k_do_align): Correct check for whether fill
        pattern is zero.  From Manfred Hollstein.

Thu Nov 30 13:25:49 1995  Kim Knuttila  <krk@cygnus.com>

        * config/tc-ppc.c (ppc_pe_section): To get the alignment right for
        the various idata sections, we check the name on the .section pseudo.

Thu Nov 30 11:23:42 1995  Manfred Hollstein KS/EF4A 60/1F/110 #40283  <manfred@lts.sel.alcatel.de>

        * config/obj-coff.c (fixup_segment): If TC_M88K is defined, do not
        add section's paddr to add_number; compatibility to native as and
        ld forbids.

Wed Nov 29 23:14:27 1995  Ken Raeburn  <raeburn@cygnus.com>

        * configure.in: Treat m68k-sysv4 like m68k-elf, not m68k-sysv3.

        * hash.c (struct hash_entry): Moved here...
        * hash.h (struct hash_entry): ...from here.

        * config/obj-elf.c (elf_frob_symbol): Don't free and clear sy_obj
        if it's already known to be null.

Wed Nov 29 13:00:20 1995  Michael Meissner  <meissner@tiktok.cygnus.com>

        * config/tc-ppc.c (md_apply_fix3): Don't adjust the value for 32
        bit relocs converted to PC relative relocs.  This turned out to
        add the offset from the beginning of .text twice.

Tue Nov 28 10:42:36 1995  Ken Raeburn  <raeburn@cygnus.com>

        * stabs.c (s_stab_generic): In 's' case, free string from
        obstack.

        * config/obj-elf.h (ELF_TARGET_SYMBOL_FIELDS): Remove unused field
        sy_name_offset.
        * config/obj-multi.h (ELF_TARGET_SYMBOL_FIELDS) [OBJ_MAYBE_ELF]:
        Ditto.

        * subsegs.h (segment_info_type): Make bitfields unsigned.

        * expr.h (struct expressionS): Make X_op and X_unsigned bitfields,
        and move them together.  On most systems this will reduce the
        structure size by one word.
        (operatorT): Define O_max.
        * expr.c (expr_begin): Verify that X_op is wide enough to hold
        O_max.

        * read.c (pop_insert): Print error returned by hash table
        insertion code.

        * as.c (dump_statistics): Split out from main; dump some hash
        table stats and target-specific stats.
        (start_time): No longer automatic to main.
        (main): Set file-level start_time and call dump_statistics at
        exit.  Exit by calling xexit.
        (show_usage): Make --statistics description less specific.
        * subsegs.c (subsegs_print_statistics): New function.
        * write.c (write_print_statistics): New function.
        (n_fixups): New static variable.
        (fix_new_internal): Increment it.
        * read.c (read_print_statistics): New function.
        * read.h (read_print_statistics): Declare.
        * symbol.c (symbol_print_statistics): New function.
        * symbol.h (symbol_print_statistics): Declare.
        * hash.c (hash_print_statistics): New function.
        * hash.h (hash_print_statistics): Declare.
        * config/tc-i386.c (i386_print_statistics): New function.
        * config/tc-i386.h (i386_print_statistics): Declare.
        (tc_print_statistics): New macro.
        * messages.c (as_fatal, as_assert, as_abort): Use xexit, not
        exit.

        * hash.c (DELETED): Rewrite to use a valid but unique address.
        (START_POWER): Reduce to 10.
        (enum stat_enum): New enumerator, replacing STAT_* index macros.
        Add new values for counting strcmp calls.
        (GROW_FACTOR): New macro.
        (hash_grow): Use GROW_FACTOR.  Rewrite for quick returns instead
        of nesting blocks.
        (FULL_VALUE): New macro.  Use 1/4 of table size instead of 1/2.
        (hash_new): Use FULL_VALUE.
        (struct hash_control): Definition moved here.
        (hash_code): Don't mask to low bits.
        (hash_ask): Mask returned hash code here.  Check hash value before
        calling strcmp; count strcmp calls.
        * hash.h (struct hash_control): Declare, don't define, here.
        (HASH_STATLENGTH): Deleted.
        (struct hash_entry): Add field for hash code.
        (hash_say, hash_apply): Don't declare.

        * hash.c (destroy): Return void.
        (applicatee): Ditto.
        (main): Fix declarations.
        (hash_apply): Return void.  Argument `function' returns void.  Put
        inside "#ifdef TEST".
        (hash_say): Define only if TEST is defined.
        * hash.h (hash_apply, hash_say): Declarations deleted.

Mon Nov 27 13:18:25 1995  Ian Lance Taylor  <ian@cygnus.com>

        * configure: Rebuild with autoconf 2.7.

Tue Nov 21 18:39:01 1995  Ian Lance Taylor  <ian@cygnus.com>

        * aclocal.m4 (AC_PROG_CC): Remove local definition.
        * configure: Rebuild with autoconf 2.6.

Mon Nov 20 17:26:00 1995  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-ppc.c (ppc_debug_name_section_size): Remove.
        (ppc_stabx): Don't increment ppc_debug_name_section_size.
        (ppc_bc): Likewise.
        (ppc_frob_file): Remove.
        * config/tc-ppc.h (tc_frob_file): Don't define.
        (ppc_frob_file): Don't declare.

Mon Nov 20 13:37:05 1995  Ken Raeburn  <raeburn@cygnus.com>

        * Makefile.in (TARG_CPU_DEP_alpha): Mention alpha-opcode.h.
        * config/alpha-opcode.h: Include one-operand variants of jmp and
        jsr.

        * config/te-delt88.h: Renamed from te-delta88.h, to avoid conflict
        with te-delta.h in 8.3 file systems.
        * configure.in: Adjusted.

Thu Nov 16 12:49:38 1995  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-mips.c (s_err): Remove; just use the one in read.c.

        * config/m68k-parse.y (yylex): In MRI mode, '@' can start an octal
        number.
        * expr.c (operand): Handle MRI suffixes after unadorned 0.

Thu Nov 16 00:21:44 1995  Ken Raeburn  <raeburn@cygnus.com>

        Version 2.6 released.
        * Makefile.in (VERSION): Updated to 2.6.

        * config/obj-coff.c (write_object_file): Change use of md_do_align
        to pass a pointer rather than a fill value, to match other uses.

Wed Nov 15 03:52:00 1995  Ken Raeburn  <raeburn@cygnus.com>

        * config/tc-ns32k.h (TC_FIX_TYPE): Add missing semicolon.

        * as.c (main): Move md_end call to just after call to
        perform_an_assembly_pass.  Delete cpu-specific code here.
        * config/tc-i960.h (md_end): New macro, calls brtab_emit.
        * config/tc-arm.c (md_end): Unused function deleted.
        * config/tc-ns32k.c (md_end): Ditto.

        * config/tc-i386.c (i386_align_code): New function, moved here
        from HANDLE_ALIGN macro.
        * config/tc-i386.h (HANDLE_ALIGN): Call it.

        Mon Jul 31 14:53:19 1995  Alan Modra  <alan@spri.levels.unisa.edu.au>

        * config/tc-i386.h (md_do_align): cast fill and 0x90 to char
        before comparing

        Mon May  1 10:91:49 1995  Alan Modra  <alan@spri.levels.unisa.edu.au>

        * config/tc-i386.h (md_do_align):  Make ".align n,0x90" generate
        multi-byte nops to avoid changing gcc.  The necessary gcc change
        might break old assemblers.

        Sat Apr 22 20:53:05 1995  Alan Modra  <alan@spri.levels.unisa.edu.au>

        * config/tc-i386.h (md_do_align, HANDLE_ALIGN):  Add macros to
        generate optimal multi-byte nop instructions for ".align n"
        ".align n,0x90", and aligns requiring more than 15 bytes of
        padding still generate multiple 0x90's as before.

Mon Nov 13 17:40:21 1995  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-m68k.c (s_mri_until): Call pop_mri_control.

Mon Nov 13 20:39:06 1995  Stan Shebs  <shebs@andros.cygnus.com>

        * configure.in (ppc-*-macos*, ppc-*-mpw*): New configurations.
        * configure: Update.
        * mpw-make.sed: Reorder commands to make sed happier.
        * config/te-macos.h: New file.
        * config/tc-ppc.h (TARGET_FORMAT): Set correctly for PowerMac.

Sun Nov 12 21:14:56 1995  Jeffrey A Law  (law@cygnus.com)

        * config/tc-hppa.c (pa_ip): Fix off-by-2 bug in length check for
        conditional branches.
        (md_apply_fix): Likewise.

Thu Nov  9 16:14:01 1995  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-a29k.c (md_apply_fix): Warn if an attempt is made to
        generate a reloc which the linker will not handle correctly.  Fix
        overflow checking--R_IREL is 18 bits, not 17.

Wed Nov  8 19:59:36 1995  Ian Lance Taylor  <ian@cygnus.com>

        * config/obj-coff.c (fixup_segment): Don't subtract md_pcrel_from
        from a PC relative reloc if TC_A29K.

        * config/tc-a29k.c (line_separator_chars): Restore '@'.  Existing
        code depends upon it.

        * config/tc-a29k.c (md_operand): Handle $float, $double, and
        $extend.  Based on code from Eric Freudenthal
        <freudenthal@nyu.edu>.
        * config/tc-a29k.h (LEX_DOLLAR): Define.
        * read.c (LEX_DOLLAR): Define if not defined.
        (lex_type): Use LEX_DOLLAR.

Wed Nov  8 16:38:14 1995  Eric Freudenthal <freudenthal@nyu.edu>

        * configure.in (a29k-nyu-sym1): New target, just like other a29k
        targets.

Wed Nov  8 11:38:48 1995  Ian Lance Taylor  <ian@cygnus.com>

        * config/obj-coff.c (c_dot_file_symbol): Cast xmalloc return.

Tue Nov  7 09:14:35 1995  Kim Knuttila  <krk@cygnus.com>

        * config/tc-ppc.c (md_apply_fix3): Added BFD_RELOC_RVA. Currently
        used only by "dlltool.c".

Mon Nov  6 18:51:26 1995  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-alpha.c: Undefine inline if not __GNUC__.
        (md_pseudo_table): Don't define "extern".

Sat Nov  4 00:51:21 1995  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-ppc.c (ppc_biei): Force symbol into text_section.

        * config/tc-ppc.c (md_show_usage): Put backslash at end of line.

Fri Nov  3 13:02:59 1995  Ian Lance Taylor  <ian@cygnus.com>

        * macro.c (macro_expand_body): Don't warn about == with a
        nonexistent parameter, in case it is in a comment field.

        * as.c (main): On TC_A29K, call macro_init with macro_alternate
        set to 1.
        * macro.c (get_any_string): Don't keep quotes if macro_strip_at is
        set, even if macro_alternate is set.
        (get_apost_token): If macro_strip_at, only skip kind if it is '@'.
        (sub_actual): If macro_strip_at, and kind is '@', don't look up
        the token unless it ended in '@'.
        * config/tc-a29k.c (line_separator_chars): Remove '@'.
        * doc/c-a29k.texi: Document macro usage on A29K.

Thu Nov  2 23:07:57 1995  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-m68k.c (m68k_ip): Handle new 'W' place, meaning a
        signed word.
        (install_operand): Likewise.

        * config/obj-elf.c (ecoff_debug_pseudo_table): Add "extern".

Wed Nov  1 15:17:02 1995  Manfred Hollstein KS/EF4A 60/1F/110 #40283  <manfred@lts.sel.alcatel.de>

        * configure.in (m88k-motorola-sysv*): New target.
        * configure: Rebuild.
        * config/te-delta88.h: New file.
        * config/obj-coff.c (write_object_file): Use md_do_align if it is
        defined.
        * config/tc-m88k.h (SUB_SEGMENT_ALIGN): Define.
        (md_do_align): Define.
        * config/tc-m88k.c: Include "subsegs.h".
        (m88k_do_align): New function.

        * config/te-delta.h (STRIP_UNDERSCORE): Don't define.
        (COFF_NOLOAD_PROBLEM): Define.
        (LOCAL_LABELS_DOLLAR, LOCAL_LABELS_FB): Define.

Wed Nov  1 16:07:43 1995  Ken Raeburn  <raeburn@cygnus.com>

        * config/tc-i386.c (md_assemble): For a jump instruction with
        non-constant target, require 7 available bytes in the current
        frag, not 6.

Tue Oct 31 15:37:16 1995  Fred Fish  <fnf@rtl.cygnus.com>

        * config/obj-elf.h: Include bfd/elf-bfd.h rather than
        bfd/libelf.h.

Tue Oct 31 16:34:28 1995  David Mosberger-Tang  <davidm@azstarnet.com>

        * configure.in (alpha-*-linux*): Use ecoff.
        * configure: Rebuild.
        * ecoff.c (ecoff_directive_extern): New function.
        (ecoff_directive_weakext): New function.
        (ecoff_build_symbols): Handle weak symbols.
        (ecoff_setup_ext): Likewise.
        (ecoff_frob_symbol): Warn about weak common symbols.
        * ecoff.h (ecoff_directive_extern): Declare.
        (ecoff_directive_weakext): Declare.
        * symbols.c (S_IS_WEAK): New function.
        * symbols.h (S_IS_WEAK): Declare.
        * config/obj-ecoff.c (obj_pseudo_table): Add "extern" and
        "weakext".
        * config/tc-mips.c (mips_pseudo_table): Remove "extern".
        (s_extern): Remove.

Tue Oct 31 13:29:08 1995  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-ppc.c (ppc_lglobl): Do the right thing.

        * config/tc-ppc.c (ppc_bb): Call SF_SET_PROCESS.
        (ppc_eb): Likewise.  Set the storage class to C_BLOCK, not C_FCN.
        (ppc_frob_symbol): Don't change C_BLOCK symbols to C_HIDEXT.
        * config/obj-coff.c (coff_frob_symbol): Don't call
        SA_SET_SYM_ENDNDX with the current symbol; call it with the next
        one.  If OBJ_XCOFF, try to figure out whether the symbol is going
        to be dropped.

        * config/tc-ppc.c (md_pseudo_table): Add "bc" and "ec".
        (ppc_stab_symbol): New static variable.
        (ppc_change_csect): Check that ppc_toc_csect is not NULL.
        (ppc_stabx): Set ppc_stab_symbol around call to symbol_make.  Set
        sy_tc.real_name to the stab string.
        (ppc_bc, ppc_ec): New static functions.
        (ppc_canonicalize_symbol_name): If ppc_stab_symbol is set, don't
        do anything.
        (ppc_symbol_new_hook): If ppc_stab_symbol is set, don't look for a
        suffix.
        (ppc_frob_symbol): Set BSF_NOT_AT_END for symbols with csect aux
        entries.

        * input-scrub.c (input_scrub_push): Reset sb_index.

Mon Oct 30 17:52:46 1995  Ian Lance Taylor  <ian@cygnus.com>

        * listing.c (listing_newline): Don't create a frag in the absolute
        section.

Sat Oct 28 01:02:05 1995  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-ppc.c (md_pseudo_table): Add "data" and "text".
        (ppc_csect): Move most of the code to ppc_change_csect, and call
        it.
        (ppc_change_csect): New static function, taken from ppc_csect.
        (ppc_section): New static function.
        (ppc_saw_abs): New static varable.
        (ppc_frob_symbol): Create aux entry for absolute symbols.  Warn if
        a symbol has no csect.
        (ppc_adjust_symtab): New function.
        * config/tc-ppc.h (tc_adjust_symtab): Define if OBJ_XCOFF.
        (ppc_adjust_symtab): Declare if OBJ_XCOFF.

        * write.c (write_object_file): If tc_adjust_symtab is defined,
        call it just before the call to obj_adjust_symtab.

        * symbols.c (symbol_find_or_make): Change name to be const.
        * symbols.h (symbol_find_or_make): Update declaration.

Thu Oct 26 19:18:27 1995  Ken Raeburn  <raeburn@cygnus.com>

        * doc/as.texinfo (Align): Mention SH.
        * doc/c-m68k.texi (M68K-Directives, .even): Describe behavior, not
        .align value.
        * doc/c-z8k.texi (Z8000 Directives, global): Fix minor typo.
        (Z8000 Directives, even): Don't give numeric align value, instead
        explain behavior.

Thu Oct 26 11:45:03 1995  Richard Earnshaw (rearnsha@armltd.co.uk)

        * tc-arm.c (do_ldst): Assemble ldr/str r0, [r1] as a pre-increment
        instruction.

Wed Oct 25 11:59:24 1995  Per Bothner  <bothner@kalessin.cygnus.com>

        * Makefile.in (diststuff):  Also make info.
        (maintainer-clean realclean):  Also make clean-info.

Tue Oct 24 15:21:33 1995  Jeffrey A Law  (law@cygnus.com)

        * config/tc-hppa.c (md_pseudo_table): Add new ".nsubspa" opcode.
        (pa_subspace): For ".nsubspa", always create a new subspace
        with the given attributes, even if one already exists with the
        same name.

Tue Oct 24 14:50:38 1995  Michael Meissner  <meissner@tiktok.cygnus.com>

        * config/tc-ppc.h (TC_FORCE_RELOCATION_SECTION): Rename from
        TC_FORCE_RELOCATION, taking an additional section argument.  If
        the section of the target symbol is not the same as the current
        section, always force the relocation to be used.
        (MD_PCREL_FROM_SECTION): New macro to call md_pcrel_from_section.

        * config/tc-ppc.c (md_pcrel_from_section): Rename from the
        md_pcrel_from function, taking an additional section argument.
        Invoke TC_FORCE_RELOCATION_SECTION instead of TC_FORCE_RELOCATION.

        * write.c (TC_FORCE_RELOCATION_SECTION): Define in terms of the
        older TC_FORCE_RELOCATION if not defined.
        (MD_PCREL_FROM_SECTION): If not defined, invoke md_pcrel_from.
        (fixup_segment): Use MD_PCREL_FROM_SECTION instead of
        md_pcrel_from, and TC_FORCE_RELOCATION_SECTION instead of
        TC_FORCE_RELOCATION.
        
Mon Oct 23 16:20:04 1995  Ken Raeburn  <raeburn@cygnus.com>

        * input-scrub.c (as_where): Set name to null pointer if we don't
        have a file name.
        * messages.c (identify): Only print filename if non-null.
        (as_show_where): Ditto, for line number too.
        (as_warn_internal, as_bad_internal): Ditto.

        * input-file.c (input_file_open): If the input file can't be
        opened, consider it an error.

Mon Oct 23 11:15:44 1995  James G. Smith  <jsmith@pasanda.cygnus.co.uk>

        * config/tc-mips.c: Added mips_4100 control, and support for
        accepting the 4100 as a MIPS architecture variant (md_begin,
        macro_build, mips_ip, md_parse_option). Adding suitable
        command-line OPTIONs, and updating the help text (md_show_usage).
        
Wed Oct 18 13:20:32 1995  Ken Raeburn  <raeburn@cygnus.com>

        * subsegs.c (subseg_begin): Only set absolute_frchain.fix_* when
        BFD_ASSEMBLER is defined.

        * Use one active frag and one obstack per frag chain:
        * frags.c (frags): Variable deleted.
        (frag_alloc): New function.
        (frag_grow, frag_more, frag_variant, frag_now_fix,
        frag_append_1_char): Refer to frchain_now->frch_obstack instead of
        frags variable.
        (frag_new): Ditto.  Verify that frch_last and frag_now match on
        entry and exit, and that old frag_now has non-zero type.  Replace
        "know" uses with "assert".  Use frag_alloc instead of mucking with
        obstack alignment.
        * frags.h (frags): Declaration deleted.
        * subsegs.h (struct frchain): Add new field frch_frag_now.
        * subsegs.c (frchains, dummy_frag, absolute_frchain): New static
        variables.
        (subsegs_begin): Initialize frchains obstack.  Under gcc, don't
        give it any stricter alignment than frchainS structures need.  Do
        not initialize frags obstack.  Set frag_now to point to
        dummy_obstack.  Initialize absolute_frchain.
        (subseg_set_rest): Save and restore frag_now in frch_frag_now
        field of frchainS.  Don't create new frags on section switch, and
        use frag_alloc when creating a new frag chain.  For absolute
        section, set frchain_now to absolute_frchain.  Verify that
        frch_last and frag_now match on entry and exit.  Initialize
        per-chain obstack, and under gcc, set required alignment to that
        needed by fragS structure.

        * write.c (chain_frchains_together_1): Verify fr_type is nonzero.

        * stabs.c (get_stab_string_offset): Only copy input string if a
        fresh copy is needed, not if the section already exists.
        (s_stab_generic): Cache stab section name to bypass lookups, since
        usually it will match.  Could be made faster still by changing the
        memory allocation rules.
        (s_xstab): Cache section name to bypass repeated string
        allocation.

        * frags.c (frag_new): Deleted register declarations.

        * listing.c (frag_now): Don't declare.

        * as.c (chunksize): New variable.
        (debug_memory): New variable.
        (main): If debug_memory is set, reduce chunksize and
        _bfd_chunksize.
        * as.h (chunksize): Declare it.
        * read.c (read_begin): Use it.

        * config/tc-alpha.c (md_shortopts): Include 'g'.
        (md_parse_option): Ignore it.

        * Makefile.in (distclean): Remove Makefile and config.status from
        testsuite directory.
        (clean-here): Don't delete testsuite.  Instead, delete only the
        files within it that would be generated by running tests.

        * config/tc-hppa.c (hppa_elf_mark_end_of_function): Call
        frag_now_fix instead of accessing obstack info directly.
        * config/tc-arm.c (s_ltorg): Ditto.
        (md_assemble): Ditto.

        * config/tc-i386.c (md_assemble): Call frag_grow instead of
        obstack_room.

Wed Oct 18 12:22:59 1995  Ken Raeburn  <raeburn@cygnus.com>

        * stabs.c (aout_process_stab): Insert debug symbol into symbol
        chain after parsing value expression, if any, to avoid separating
        continued .stabs lines.

Mon Oct 16 10:56:41 1995  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-mips.c (mips_elf_pseudo_table): Remove.
        (mips_pop_insert): Don't call pop_insert on mips_elf_pseudo_table.

Mon Oct 16 07:07:37 1995  Michael Meissner  <meissner@wogglebug.tiac.net>

        * config/tc-ppc.c (md_begin): Use new flags PPC_OPCODE_COMMON for
        -mcom support and PPC_OPCODE_ANY for -many.
        (md_parse_option): Ditto.
        (ppc_arch): Ditto.
        (md_begin): For duplicate instructions, print all duplicates
        before aborting.

Sun Oct 15 22:06:14 1995  Michael Meissner  <meissner@cygnus.com>

        * config/tc-ppc.c (md_parse_option): Support for -mcom to turn on
        common mode operation.
        (md_show_usage): Add -mcom to usage message.

Fri Oct 13 13:32:45 1995  steve chamberlain  <sac@slash.cygnus.com>

        * expr.c (op_rank): Add O_symbol_rva.
        * expr.h (operatorT): Add O_symbol_rva.
        * read.c (cons_worker): Set O_symbol_rva when necessary.
        * write.c (fix_new_exp): Understand O_symbol_rva.

Tue Oct 10 11:34:14 1995  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-mips.c: Correct s_cons arguments.  From Michael
        Joosten <joost@ori.cadlab.de>.

Mon Oct  9 19:59:53 1995  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-ppc.c (ppc_macro): Make count unsigned.
        (ppc_biei): Set segment to now_seg and value to coff_n_line_nos.
        (ppc_frob_symbol): Handle C_BINCL and C_EINCL symbols by setting
        the fix_line field.
        * config/obj-coff.c (coff_n_line_nos): Rename from n_line_nos, and
        make non-static.  Change all users.
        * config/obj-coff.h (coff_n_line_nos): Declare.

Fri Oct  6 16:24:27 1995  Ken Raeburn  <raeburn@cygnus.com>

        Mon Sep 25 22:49:32 1995  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>

        * configure.in (AC_ARG_WITH(bfd-assembler)): Fix help message.

        * config/obj-elf.c (obj_elf_common): Convert specified byte
        alignment to power of two.  Set size of local bss symbol.

        * config/tc-m68k.c (tc_gen_reloc): Fix typo in variable name.

Fri Oct  6 15:22:25 1995  Ian Lance Taylor  <ian@cygnus.com>

        * sb.c, macro.c: Decide whether to include <string.h> or
        <strings.h> just as as.h does.

Fri Oct  6 09:55:33 1995  Doug Evans  <dje@canuck.cygnus.com>

        * Makefile.in (site.exp): Fix setting of $srcdir.

        * config/tc-arm.c (md_atof): Fix little-endian output.
        * config/tc-arm.h (ARM_BI_ENDIAN): Move definition so defined for
        all coff targets.

Thu Oct  5 20:17:30 1995  Ken Raeburn  <raeburn@cygnus.com>

        * doc/as.texinfo: Split out the NS32k family documentation,
        despite its being commented out for now.
        * doc/c-ns32k.texi: New file.

        * sb.c, macro.c: Include string.h.

        * Makefile.in (comparison): Only check *.o; we don't care if
        timestamps inserted by the native linker differ.

        * config/tc-alpha.c (alpha_align): Only fill with a no-op pattern
        if alignment stricter than 4 bytes is requested; in that case,
        align to a 4-byte boundary first.

        Thu Sep 28 19:35:27 1995  Pat Rankin  <rankin@eql.caltech.edu>

        * config/obj-vms.c (VMS_RSYM_Parse): eliminate "might be used
        uninitialized" warning for `Max_Source_Offset'.

Wed Oct  4 16:17:02 1995  Kim Knuttila  <krk@cygnus.com>

        * config/tc-ppc.c (parse_toc_entry): New function to parse [toc]
        qualifiers and detect errors if present.
        (md_assemble): Add call to parse_toc_entry. Also added some support
        for the [tocv] qualifier.
        (ppc_pe_tocd): New function to support data in the toc section.

Wed Oct  4 14:03:39 1995  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-ppc.c (ppc_frob_symbol): Don't create an aux entry for
        an absolute symbol.

Tue Oct  3 12:18:19 1995  Ian Lance Taylor  <ian@cygnus.com>

        * config/tc-m68k.c (isword): Accept all values from -65536 to
        +65535, so ~VAL will not be rejected.

        * cond.c (s_endif): Call demand_empty_rest_of_line.  In MRI mode,
        skip characters after the pseudo-op.
        (s_else): Likewise.
        * read.c (get_line_sb): Don't look past buffer_limit.
        (s_include): In MRI mode, skip characters after the file name.

Mon Oct  2 16:15:27 1995  Ian Lance Taylor  <ian@cygnus.com>

        * config/m68k-parse.y (m68k_reg_parse): In MRI mode, permit
        periods in register names.

For older changes see ChangeLog.1.