gas/ChangeLog

   1 2007-09-04  H.J. Lu  <hongjiu.lu@intel.com>
   2
   3         * config/tc-i386.c (process_operands): Remove segment override
   4         check on SVME instructions.
   5         (i386_index_check): Remove memory operand check on SVME
   6         instructions.
   7
   8 2007-09-04  Alan Modra  <amodra@bigpond.net.au>
   9
  10         * config/tc-spu.c (struct spu_insn): Delete "flag".  Add "reloc".
  11         (md_assemble): Update init of insn.  Use insn.reloc instead of
  12         calculating from flag.
  13         (get_imm): Set reloc rather than flag.
  14         (calcop): Formatting.
  15
  16 2007-08-29  Daniel Jacobowitz  <dan@codesourcery.com>
  17
  18         * dwarf2dbg.c (dwarf2_directive_loc): Emit duplicate .loc directives.
  19
  20 2007-08-28  Daniel Jacobowitz  <dan@codesourcery.com>
  21
  22         * doc/c-arc.texi: Fix typo.
  23
  24 2007-08-28  H.J. Lu  <hongjiu.lu@intel.com>
  25
  26         * config/tc-i386.c (process_suffix): Handle cmpxchg8b in
  27         Intel mode.
  28
  29 2007-08-28  Nathan Sidwell  <nathan@codesourcery.com>
  30
  31         * config/tc-m68k.c (mcf52235_ctrl): Add cache registers.
  32         (mcf5253_ctrl): Add RAMBAR, MBAR, MBAR2.
  33         (mcf5407_ctrl): New.
  34         (m68k_cpus): Adjust 5407 entry.
  35
  36 2007-08-28  Maxim Kuvyrkov  <maxim@codesourcery.com>
  37
  38         * config/tc-m68k.c (mcf51qe_ctrl): Define 51QE control registers.
  39         (m68k_cpus): Define 51QE cpu.
  40
  41 2007-08-28  Mark Shinwell  <shinwell@codesourcery.com>
  42             Joseph Myers  <joseph@codesourcery.com>
  43
  44         * as.c (main): Flush stderr before printing listings to ensure
  45         consistent output order across platforms.
  46
  47 2007-08-28  Robert Sebastian Gerus  <arachnist@gmail.com>
  48
  49         * configure.tgt: Add support for i[3-7]86-*-dragonfly*.
  50
  51 2007-08-24  Joseph Myers  <joseph@codesourcery.com>
  52             Paul Brook  <paul@codesourcery.com>
  53
  54         * remap.c: New.
  55         * as.h (remap_debug_filename, add_debug_prefix_map): Declare.
  56         * as.c (show_usage): Document --debug-prefix-map option.
  57         (parse_args): Handle --debug-prefix-map.
  58         * dwarf2dbg.c (out_file_list, out_debug_info): Remap debug paths.
  59         * stabs.c (stabs_generate_asm_file): Remap debug paths.
  60         * Makefile.am (GAS_CFILES): Add remap.c
  61         (GENERIC_OBJS): Add remap.o.
  62         Regenerate dependencies.
  63         * Makefile.in: Regenerate.
  64         * doc/as.texinfo (--debug-prefix-map): Document.
  65
  66 2007-08-24  Aurelien Jarno  <aurel32@debian.org>
  67
  68         * config/tc-arm.c (md_apply_fix): Cast bfd_vma values to long
  69         before printing them.
  70
  71 2007-08-24  Anders Waldenborg  <anders@0x63.nu>
  72             Alan Modra  <amodra@bigpond.net.au>
  73
  74         * config/tc-i386.c (lex_got): Don't scan past a comma.
  75
  76 2007-08-23  Ben Elliston  <bje@au.ibm.com>
  77
  78         * config/tc-ppc.c (parse_cpu): Handle "750cl".
  79         (pre_defined_registers): Add "gqr0" to "gqr7", "gqr.0" to "gqr.7".
  80         (md_show_usage): Document -m750cl.
  81         (md_assemble): Handle two delimiters in succession (eg. `),').
  82         * doc/c-ppc.texi (PowerPC-Opts): Document -m750cl.
  83         * testsuite/gas/ppc/ppc.exp: Run ppc70ps dump tests.
  84         * testsuite/gas/ppc/ppc750ps.s: New file.
  85         * testsuite/gas/ppc/ppc750ps.d: Likewise.
  86
  87 2007-08-23  Ben Elliston  <bje@au.ibm.com>
  88
  89         * doc/c-arm.texi (ARM Directives): Move brackets out of @vars.
  90
  91 2007-08-17  Alan Modra  <amodra@bigpond.net.au>
  92
  93         PR gas/4079
  94         * config/tc-i386.c (x86_cons): Complain about invalid @got etc.
  95         expressions.
  96         (i386_immediate): Detect and complain about more cases of
  97         invalid immediate expressions.  Return failure rather than
  98         converting them to zero.
  99         (i386_displacement): Likewise.
 100
 101 2007-08-17  Alan Modra  <amodra@bigpond.net.au>
 102
 103         * po/Make-in: Add --msgid-bugs-address to xgettext invocation.
 104
 105 2007-08-14  Andreas Schwab  <schwab@suse.de>
 106
 107         * config/tc-ia64.c (tc_gen_reloc): Return NULL if relocation is
 108         unrepresentable.
 109
 110 2007-08-12  Matthias Klose  <doko@ubuntu.com>
 111
 112         * doc/Makefile.am (AM_MAKEINFOFLAGS, TEXI2DVI): Include
 113         $(top_srcdir)/../../bfd/doc.
 114         * doc/Makefile.in: Regenerate.
 115
 116 2007-08-10  Nick Clifton  <nickc@redhat.com>
 117
 118         * NEWS: Add a marker for the 2.18 features.
 119
 120 2007-08-09  Paul Brook  <paul@codesourcery.com>
 121
 122         * config/tc-arm.c (relaxed_symbol_addr): Compensate for alignment.
 123
 124 2007-08-09  H.J. Lu  <hongjiu.lu@intel.com>
 125
 126         * config/tc-i386.c (check_byte_reg): Support pextrb and pinsrb.
 127
 128 2007-07-29  H.J. Lu  <hongjiu.lu@intel.com>
 129
 130         * config/tc-i386.c (check_long_reg): Allow cvtss2si to convert
 131         DWORD memory to Reg64 in Intel synax.
 132         (check_qword_reg): Allow cvtsd2si to convert QWORD memory to
 133         Reg32 in Intel syntax.
 134
 135 2007-07-25  Sterling Augustine  <sterling@tensilica.com>
 136
 137         * config/tc-xtensa.c (xtensa_extui_opcode): New.
 138         (xg_expand_assembly_insn): Check for invalid extui operands.
 139         (md_begin): Initialize xtensa_extui_opcode.
 140
 141 2007-07-24  Nick Clifton  <nickc@redhat.com>
 142
 143         * config/tc-mep.h (skip_whitespace): Remove definition.
 144
 145 2007-07-23  H.J. Lu  <hongjiu.lu@intel.com>
 146
 147         * config/tc-i386.c (cpu_arch): Change i386 to PROCESSOR_I386.
 148         (f32_15): Removed.
 149         (jump_31): New.
 150         (f32_patt): Remove f32_15.
 151         (f16_patt): Likewise.
 152         (i386_align_code): Updated to alt_long_patt for 64bit by
 153         default.
 154
 155         * config/tc-i386.h (processor_type): Add PROCESSOR_I386.
 156
 157 2007-07-23  Evandro Menezes  <evandro.menezes@amd.com>
 158
 159         * config/tc-i386.c (i386_align_code): Enable alignment up to
 160         MAX_MEM_FOR_RS_ALIGN_CODE bytes.  Remove special treatment
 161         for K8.
 162
 163         * config/tc-i386.h (MAX_MEM_FOR_RS_ALIGN_CODE): Changed to 31.
 164
 165 2007-07-20  Nick Clifton  <nickc@redhat.com>
 166
 167         * app.c (do_scrub_chars): Provide a one character buffer to hold a
 168         pushed back newline at the end of an unterminated quoted string.
 169
 170 2007-07-14  Nick Clifton  <nickc@redhat.com>
 171
 172         * config/tc-arm.c (create_register_alias): Return a boolean rather
 173         than an integer.
 174         Check the return value of insert_reg_alias and do not continue to
 175         create aliases once an insertion has failed.
 176         (s_unreq): Delete the all-upper-case and all-lower-case
 177         alternatives as well.
 178
 179 2007-07-12  Kai Tietz   <kai.tietz@onevision.com>
 180
 181         * symbols.c: Print bfd_hostptr_t to file via fprintf_vma.
 182         * write.c: Likewise.
 183
 184 2007-07-11  Daniel Jacobowitz  <dan@codesourcery.com>
 185
 186         * config/tc-mips.c (mips_dwarf2_format, mips_dwarf2_addr_size): Use
 187         HAVE_64BIT_SYMBOLS.
 188
 189 2007-07-04  Richard Sandiford  <richard@codesourcery.com>
 190
 191         * config/tc-mips.c (mips_cpu_info_table): Add new entries for
 192         {24k,24ke,34k,74k}f{2_1,1_1,x}.  Also add an entry for 74kf3_2.
 193         Deprecate *x and *fx.
 194         * doc/c-mips.texi: Document the new CPU arguments.  Deprecate
 195         *x and *fx.
 196
 197 2007-07-04  H.J. Lu  <hongjiu.lu@intel.com>
 198
 199         * config/obj-coff.h (x86_64_target_format): Renamed to ...
 200         (i386_target_format): This
 201         (TARGET_FORMAT): Use i386_target_format.
 202
 203         * config/tc-i386.c (x86_64_target_format): Removed.
 204         (i386_target_format): Handle PE formats.
 205
 206 2007-07-04  Nick Clifton  <nickc@redhat.com>
 207
 208         * symbols.c (symbol_relc_make_value): Use bfd_sprintf_vma in order
 209         to get the right length of printed value.
 210
 211 2007-07-03  Nick Clifton  <nickc@redhat.com>
 212
 213         * COPYING: Replace with GPLv3 text.
 214         * app.c: Update copyright notice to refer to GPLv3.
 215         * as.c, as.h, asintl.h, atof_generic.c, bignum.h, bit_fix.h,
 216         cgen.c, cond.c, debug.c, depend.c, dw2gencfi.c, dw2gencfi.h,
 217         dwarf2dbg.c, dwarf2dbg.h, ecoff.c, ecoff.h, ehopt.c, emul.h,
 218         emul_target.h, expr.c, expr.h, flonum-copy.c, flonum.h,
 219         flonum-konst.c, frags.c, frags.h, hash.c, hash.h, input-file.c,
 220         input-file.h, input-scrub.c, ibtl-lex.h, itbl-lex.l, itbl-ops.c,
 221         itbl-ops.h, itbl-parse.y, listing.c, listing.h, literal.c,
 222         macro.c, messages.c, obj.h, output-file.c, output-file.h, read.c,
 223         read.h, sb.c, sb,h, stabs.c, struc-symbol.h, subsegs.c, subsegs.h,
 224         symbols.c, symbols.h, tc.h, write.c, write.h, config/aout_gnu.h,
 225         config/config/atof-ieee.c, config/atof-vax.c, config/bfin-aux.h,
 226         config/bfin-defs.h, config/bfin-lex.l, config/bfin-parse.y,
 227         config/itbl-mips.h, config/m68k-parse.h, config/m68k-parse.y,
 228         config/obj-aout.c, config/obj-aout.h, config/obj-coff.c,
 229         config/obj-coff.h, config/obj-ecoff.c, config/obj-ecoff.h,
 230         config/obj-elf.c, config/obj-elf.h, config/obj-evax.c,
 231         config/obj-evax.h, config/obj-multi.h, config/obj-som.c,
 232         config/obj-som.h, config/tc-alpha.c, config/tc-alpha.h,
 233         config/tc-arc.c, config/tc-arc.h, config/tc-arm.c,
 234         config/tc-arm.h, config/tc-avr.c, config/tc-avr.h,
 235         config/tc-bfin.c, config/tc-bfin.h, config/tc-cr16.c,
 236         config/tc-cr16.h, config/tc-cris.c, config/tc-cris.h,
 237         config/tc-crx.c, config/tc-crx.h, config/tc-d10v.c,
 238         config/tc-d10v.h, config/tc-d30v.c, config/tc-d30v.h,
 239         config/tc-dlx.c, config/tc-dlx.h, config/tc-fr30.c,
 240         config/tc-fr30.h, config/tc-frv.c, config/tc-frv.h,
 241         config/tc-generic.c, config/tc-generic.h, config/tc-h8300.c,
 242         config/tc-h8300.h, config/tc-hppa.c, config/tc-hppa.h,
 243         config/tc-i370.c, config/tc-i370.h, config/tc-i386.c,
 244         config/tc-i386.h, config/tc-i860.c, config/tc-i860.h,
 245         config/tc-i960.c, config/tc-i960.h, config/tc-ia64.c,
 246         config/tc-ia64.h, config/tc-ip2k.c, config/tc-ip2k.h,
 247         config/tc-iq2000.c, config/tc-iq2000.h, config/tc-m32c.c,
 248         config/tc-m32c.h, config/tc-m32r.c, config/tc-m32r.h,
 249         config/tc-m68hc11.c, config/tc-m68hc11.h, config/tc-m68k.c,
 250         config/tc-m68k.h, config/tc-maxq.c, config/tc-maxq.h,
 251         config/tc-mcore.c, config/tc-mcore.h, config/tc-mep.c,
 252         config/tc-mep.h, config/tc-mips.c, config/tc-mips.h,
 253         config/tc-mmix.c, config/tc-mmix.h, config/tc-mn10200.c,
 254         config/tc-mn10200.h, config/tc-mn10300.c, config/tc-mn10300.h,
 255         config/tc-msp430.c, config/tc-msp430.h, config/tc-mt.c,
 256         config/tc-mt.h, config/tc-ns32k.c, config/tc-ms32k.h,
 257         config/tc-openrisc.c, config/tc-openrisc.h, config/tc-or32.c,
 258         config/tc-or32.h, config/tc-pdp11.c, config/tc-pdp11.h,
 259         config/tc-pj.c, config/tc-pj.h, config/tc-ppc.c, config/tc-ppc.h,
 260         config/tc-s390.c, config/tc-s390.h, config/tc-score.c,
 261         config/tc-score.h, config/tc-sh64.c, config/tc-sh64.h,
 262         config/tc-sh.c, config/tc-sh.h, config/tc-sparc.c,
 263         config/tc-sparc.h, config/tc-spu.c, config/tc-spu.h,
 264         config/tc-tic30.c, config/tc-tic30.h, config/tc-tic4x.c,
 265         config/tc-tic4x.h, config/tc-tic54x.c, config/tc-tic54x.h,
 266         config/tc-v850.c, config/tc-v850.h, config/tc-vax.c,
 267         config/tc-vax.h, config/tc-xc16x.c, config/tc-x16x.h,
 268         config/tc-xstormy16.c, config/tc-xstormy16.h, config/tc-xtensa.c,
 269         config/tc-xtensa.h, config/tc-z80.c, config/tc-z80.h,
 270         config/tc-z8k.c, config/tc-z8k.h, config/te-386bsd.h,
 271         config/te-freebsd.h, config/te-hppa.h, config/te-irix.h,
 272         config/te-netware.h, config/te-sparcaout.h,  config/te-tmips.h,
 273         config/te-vxworks.h, config/vax-inst.h, config/xtensa-istack.h,
 274         config/xtensa-relax.c, config/xtensa-relax.h: Likewise.
 275
 276         * flonum-mult.c: Likewise, and also correct typo referring to
 277         non-existant GNU Assembler General Public License.
 278         * config/tc-m68851.h: Likewise.
 279         * NEWS: Mention the new license.  Also note where the 2.17 release
 280         happened.
 281         * config/e-crisaout.c: Add copyright header.
 282         * config/e-criself.c, config/e-i386aout.c, config/e-i386coff.c,
 283         config/e-i386elf.c, config/e-mipscoff.c, config/e-mipself.c,
 284         config/obj-multi.c, config/te-aix5.h, config/te-armeabi.h,
 285         config/te-armlinuxeabi.h, config/te-dynix.h, config/te-epoc-pe.h,
 286         config/te-generic.h, config/te-gnu.h, config/te-go32.h,
 287         config/te-hppa64.h, config/te-hppalinux64.h, config/te-hpux.h,
 288         config/te-i386aix.h, config/te-ia64aix.h, config/te-interix.h,
 289         config/te-linux.h, config/te-lnews.h, config/te-lynx.h,
 290         config/te-mach.h, config/te-macos.h, config/te-nbsd532.h,
 291         config/te-nbsd.h, config/te-pc532mach.h, config/te-pe.h,
 292         config/te-pep.h, config/te-psos.h, config/te-riscix.h,
 293         config/te-sun3.h, config/te-svr4.h, config/te-symbian.h,
 294         config/te-wince-pe.h: Likewise.
 295
 296 2007-07-03  Nathan Sidwell  <nathan@codesourcery.com>
 297
 298         * config/tc-m68k.c (m68k_ip): Add j & K operand types.
 299         (install_operand): Add E encoding.
 300         (md_begin): Check and skip initial '.' arg character.
 301         (get_num): Add 0..511 case.
 302
 303 2007-07-03  Alan Modra  <amodra@bigpond.net.au>
 304
 305         PR 4713
 306         * config/obj-elf.c (elf_ecoff_set_ext): Make static when OBJ_MAYBE_ELF.
 307         * config/obj-elf.h (obj_ecoff_set_ext): Comment.
 308
 309 2007-07-03  Mikkel Lauritsen  <renard@nospam.dk>
 310
 311         PR 4722
 312         * app.c (do_scrub_chars <state 5>): Check for output buffer full
 313         after memcpy.
 314
 315 2007-07-02  Joseph Myers  <joseph@codesourcery.com>
 316
 317         * config/tc-mips.c (s_dtprelword, s_dtpreldword,
 318         s_dtprel_internal): New.
 319         (mips_pseudo_table): Add .dtprelword and .dtpreldword.
 320         (md_apply_fix): Handle BFD_RELOC_MIPS_TLS_DTPREL32 and
 321         BFD_RELOC_MIPS_TLS_DTPREL64.
 322
 323 2007-07-02  Alan Modra  <amodra@bigpond.net.au>
 324
 325         * Makefile.am: Run "make dep-am".
 326         * Makefile.in: Regenerate.
 327         * aclocal.m4: Regenerate.
 328         * config.in: Regenerate.
 329         * doc/Makefile.in: Regenerate.
 330         * po/POTFILES.in: Regenerate.
 331         * po/gas.pot: Regenerate.
 332
 333 2007-07-02  Alan Modra  <amodra@bigpond.net.au>
 334
 335         * config/tc-ppc.c (ppc_pe_section): Comment out code assigning
 336         coff section flag values to bfd section flag.
 337
 338 2007-06-30  H.J. Lu  <hongjiu.lu@intel.com>
 339
 340         * aclocal.m4: Regenerated.
 341         * doc/Makefile.in: Likewise.
 342         * Makefile.in: Likewise.
 343
 344 2007-06-29  Joseph Myers  <joseph@codesourcery.com>
 345
 346         * as.c (main): Only call create_obj_attrs_section if IS_ELF.
 347
 348 2007-06-29  Joseph Myers  <joseph@codesourcery.com>
 349
 350         * as.c (create_obj_attrs_section): New.
 351         (main): Call create_obj_attrs_section for ELF.
 352         * read.c (s_gnu_attribute, skip_whitespace, skip_past_char,
 353         skip_past_comma, s_vendor_attribute): New.
 354         (potable): Add gnu_attribute for ELF.
 355         * read.h (s_vendor_attribute): Declare.
 356         * config/tc-arm.c (s_arm_eabi_attribute): Replace by wrapper
 357         round s_vendor_attribute.
 358         (aeabi_set_public_attributes): Update for new attributes
 359         interfaces.
 360         (arm_md_end): Remove attributes contents setting now done
 361         generically.
 362
 363 2007-06-29  M R Swami Reddy  <MR.Swami.Redd@nsc.com>
 364
 365         * Makefile.am: Add CR16 related entry.
 366         * Makefile.in: Regenerate.
 367         * config/tc-cr16.h: New file
 368         * config/tc-cr16.c: New file
 369         * doc/c-cr16.texi: New file for cr16
 370         * doc/all.texi: Entry for cr16
 371         * doc/Makefile.am: Added c-cr16.texi
 372         * doc/Makefile.in: Regenerate
 373         * doc/as.texinfo: Entry for CR16 target
 374         * NEWS: Announce the support for the new target.
 375
 376 2007-06-26  Paul Brook  <paul@codesourcery.com>
 377
 378         * config/tc-arm.c (parse_operands): Accept generic coprocessor regs
 379         for OP_RVC.
 380         (reg_names): Add fpinst, pfinst2, mvfr0 and mvfr1.
 381
 382 2007-06-25  H.J. Lu  <hongjiu.lu@intel.com>
 383
 384         * config/tc-i386.c (process_operands): Replace regKludge
 385         with RegKludge.
 386
 387 2007-06-25  Richard Sandiford  <richard@codesourcery.com>
 388
 389         * config/tc-mips.h (TC_SYMFIELD_TYPE): New.
 390         * config/tc-mips.c (append_insn): Record which symbols have
 391         R_MIPS16_26 relocations against them.
 392         (mips_fix_adjustable): Don't reduce relocations against such symbols.
 393
 394 2007-06-22  Sterling Augustine  <sterling@tensilica.com>
 395
 396         * config/tc-xtensa.c (xg_assembly_relax): Comment termination rules.
 397         (frag_format_size): Handle RELAX_IMMED_STEP3.
 398         (xtensa_relax_frag, md_convert_frag): Likewise.
 399         * config/tc-xtensa.h (xtensa_relax_statesE): Add RELAX_IMMED_STEP3.
 400         (RELAX_IMMED_MAXSTEPS): Adjust.
 401         * config/xtensa-relax.c (widen_spec_list): Add transitions from
 402         wide branches to branch-over-jumps.
 403         (build_transition): Handle wide branches in transition patterns.
 404
 405 2007-06-22  H.J. Lu  <hongjiu.lu@intel.com>
 406
 407         * config/tc-i386.c (disp_size): New.
 408         (imm_size): Likewise.
 409         (output_disp): Use disp_size and imm_size.
 410         (output_imm): Use imm_size.
 411
 412 2007-06-19  Sterling Augustine  <sterling@tensilica.com>
 413
 414         * config/tc-xtensa.h (struct xtensa_frag_type): Update comment about
 415         use of literal_frag field.
 416         * config/tc-xtensa.c (xtensa_mark_literal_pool_location): Record frag
 417         in the literal_frag field.
 418         (xtensa_move_literals): Use it here instead of searching.  Update
 419         literal_frag field with new value.
 420
 421 2007-06-14  Paul Brook  <paul@codesourcery.com>
 422
 423         * config/tc-arm.c (do_t_mov_cmp): Handle shift by register and
 424         narrow shift by immediate.
 425
 426 2007-06-14  H.J. Lu  <hongjiu.lu@intel.com>
 427
 428         * Makefile.am (ACLOCAL_AMFLAGS): Add -I ../config -I ../bfd.
 429
 430         * acinclude.m4: Don't include m4 files.
 431         (BFD_BINARY_FOPEN): Removed.
 432         Remove libtool kludge.
 433
 434         * Makefile.in: Regenerated.
 435         * doc/Makefile.in: Likewise.
 436         * aclocal.m4: Likewise.
 437         * configure: Likewise.
 438
 439 2007-06-11  Sterling Augustine  <sterling@tensilica.com>
 440             Bob Wilson  <bob.wilson@acm.org>
 441
 442         * config/tc-xtensa.c (XTENSA_PROP_INSN_NO_TRANSFORM): Renamed to...
 443         (XTENSA_PROP_NO_TRANSFORM): ...this.
 444         (frag_flags_struct): Move is_no_transform out of the insn sub-struct.
 445         (xtensa_mark_frags_for_org): New.
 446         (xtensa_handle_align): Set RELAX_ORG frag subtype for rs_org.
 447         (xtensa_post_relax_hook): Call xtensa_mark_frags_for_org.
 448         (get_frag_property_flags): Adjust reference to is_no_transform flag.
 449         (xtensa_frag_flags_combinable): Likewise.
 450         (frag_flags_to_number): Likewise.  Use XTENSA_PROP_NO_TRANSFORM.
 451         * config/tc-xtensa.h (xtensa_relax_statesE): Add RELAX_ORG.
 452
 453 2007-06-06  Paul Brook  <paul@codesourcery.com>
 454
 455         * config/tc-arm.c (s_align): Pad code sections appropriately.
 456
 457 2007-06-05  Paul Brook  <paul@codesourcery.com>
 458
 459         * config/tc-arm.c (insns): Correct Thumb-2 ldrd/strd opcodes.
 460
 461 2007-06-05  Nick Clifton  <nickc@redhat.com>
 462
 463         PR gas/4587
 464         * config/tc-sparc.c (sparc_ip): Terminate tls_ops array.
 465
 466 2007-06-05  Alan Modra  <amodra@bigpond.net.au>
 467
 468         * config/tc-spu.c (spu_cons): Use deferred_expression.  Handle
 469         number@ppu.
 470         (tc_gen_reloc): Abort if neither addsy or subsy is set.
 471         (md_apply_fix): Don't attempt to resolve SPU_PPU relocs.
 472         * config/tc-spu.h (md_operand): Handle @ppu without sym.
 473
 474 2007-05-31  Paul Brook  <paul@codesourcery.com>
 475
 476         * config/tc-arm.c (insns): Allow strex on M profile cores.
 477
 478 2007-05-29  David S. Miller  <davem@davemloft.net>
 479             Jakub Jelinek  <jakub@redhat.com>
 480
 481         PR gas/4558
 482         * config/tc-sparc.c (md_apply_fix): Fix relocation overflow checks
 483         for BFD_RELOC_SPARC_WDISP16 and BFD_RELOC_SPARC_WDISP19.
 484
 485 2007-05-29  Alan Modra  <amodra@bigpond.net.au>
 486
 487         * config/tc-spu.h: Wrap in #ifndef/#endif.  Delete coff macros.
 488
 489 2007-05-29  Alan Modra  <amodra@bigpond.net.au>
 490
 491         * config/tc-ppc.c: Convert to ISO C.
 492         * config/tc-ppc.c: Likewise.
 493
 494 2007-05-29  Alan Modra  <amodra@bigpond.net.au>
 495
 496         * write.h (EXEC_MACHINE_TYPE): Delete.
 497         (string_byte_count, section_alignment): Delete.
 498
 499 2007-05-28  Nathan Sidwell  <nathan@codesourcery.com>
 500
 501         * app.c (do_scrub_chars): Cope with \ at end of buffer.
 502
 503 2007-05-26  Alan Modra  <amodra@bigpond.net.au>
 504
 505         * config/tc-ppc.c (ppc_insert_operand): Truncate sign bits in
 506         top 32 bits of 64 bit value if so doing results in passing
 507         range check.  Rewrite sign extension fudges similarly.  Enable
 508         fudges for powerpc64 too.  Report user value if range check
 509         fails rather than fudged value.  Negate PPC_OPERAND_NEGATIVE
 510         range rather than value, also to report user value on failure.
 511
 512 2007-03-25  Paul Brook  <paul@codesourcery.com>
 513
 514         * config/tc-arm.c (T2_SUBS_PC_LR): Define.
 515         (do_t_add_sub): Correctly encode subs pc, lr, #const.
 516         (do_t_mov_cmp): Correctly encode movs pc, lr.
 517
 518 2007-05-24  Steve Ellcey  <sje@cup.hp.com>
 519
 520         * Makefile.in: Regnerate.
 521         * configure: Regenerate.
 522         * aclocal.m4: Regenerate.
 523         * doc/Makefile.in: Regenerate.
 524
 525 2007-05-22  Bob Wilson  <bob.wilson@acm.org>
 526
 527         * doc/c-xtensa.texi (Xtensa Automatic Alignment): Remove statements
 528         and index entries about automatic alignment of ENTRY instructions.
 529
 530 2007-05-22  Nick Clifton  <nickc@redhat.com>
 531
 532         * doc/as.texinfo: Use @copying around the copyright notice.
 533
 534 2007-05-18  Joseph Myers  <joseph@codesourcery.com>
 535
 536         * config/tc-mips.c (s_mipsset): Use generic s_set for directives
 537         containing a comma.
 538
 539 2007-05-17  H.J. Lu  <hongjiu.lu@intel.com>
 540
 541         PR gas/4517
 542         2003-06-05  Michal Ludvig  <mludvig@suse.cz>
 543         * doc/as.texinfo: Document new directives: .cfi_restore,
 544         .cfi_undefined, .cfi_same_value, .cfi_return_column,
 545         .cfi_remember_state and .cfi_restore_state.
 546
 547 2007-05-17  Nathan Sidwell  <nathan@codesourcery.com>
 548
 549         * config/tc-m68k.c (md_apply_fix): Show value of out of range
 550         fixups in error message.
 551         (md_conver_frag_1): Propagate the fix source location and use
 552         as_bad_where rather than fatal, for better error messages.
 553
 554 2007-05-16  Paul Brook  <paul@codesourcery.com>
 555
 556         * config/tc-arm.c (v7m_psrs): Add uppercase PSR names and xpsr.
 557
 558 2007-05-15  Mark Shinwell  <shinwell@codesourcery.com>
 559
 560         * app.c (do_scrub_chars): Don't damage \@ pseudo-variables.
 561
 562 2007-05-15  Vincent Riviere  <vincent.riviere@freesbee.fr>
 563
 564         PR gas/3041
 565         * config/tc-m68k.c (relaxable_symbol): Make sure that the correct
 566         addend is stored for relocs against weak symbols.
 567         (md_apply_fix): So not loose track of addend for relocs against
 568         weak symbols.
 569
 570 2007-05-14  Thiemo Seufer  <ths@mips.com>
 571
 572         * config/tc-mips.c (md_parse_option): Fix parsing of -O option.
 573
 574 2007-05-14  Mei Ligang  <ligang@sunnorth.com.cn>
 575
 576         * config/tc-score.c (data_op2, validate_immediate): Fix bug for
 577         addri, addri.c, subi, and subi.c when immediate number is hex.
 578         (score_insns): Remove subis and subis.c.
 579         (do_sub_rdi16): Delete.
 580
 581 2007-05-11  Alan Modra  <amodra@bigpond.net.au>
 582
 583         * config/tc-spu.c (md_pseudo_table): Add int, long, quad.  Call
 584         spu_cons for word.
 585         (md_assemble): Tidy use of insn.flag.
 586         (get_imm): Likewise.  Handle uppercase input too.
 587         (spu_cons): New function.
 588         * config/tc-spu.h (tc_fix_adjustable): Don't adjust SPU_PPU relocs.
 589         (TC_FORCE_RELOCATION): Don't resolve them either.
 590
 591 2007-05-05  Mark Shinwell  <shinwell@codesourcery.com>
 592
 593         * config/tc-arm.c (md_apply_fix): Generate more accurate
 594         diagnostic when 8-bit immediate range is exceeded for
 595         BFD_RELOC_ARM_OFFSET_IMM8.
 596
 597 2007-05-04  Alan Modra  <amodra@bigpond.net.au>
 598
 599         PR gas/4460
 600         * config/tc-i386.c (lex_got): Don't replace the reloc token with
 601         a space if we already have a space.
 602
 603 2007-05-03  H.J. Lu  <hongjiu.lu@intel.com>
 604
 605         * config/tc-i386.c (match_template): Don't explicitly check
 606         suffix for crc32 in Intel mode.
 607         (process_suffix): Issue an error for crc32 if the operand size
 608         is ambiguous.
 609
 610 2007-05-03  Vincent Riviere  <vincent.riviere@freesbee.fr>
 611             Nick Clifton  <nickc@redhat.com>
 612
 613         PR gas/3041
 614         * config/tc-m68k.c (relaxable_symbol): Do not relax weak symbols.
 615         (tc_gen_reloc): Adjust the addend of relocs against weak symbols.
 616         (md_apply_fix): Put zero values into the frags referencing weak
 617         symbols.
 618
 619 2007-05-02  Alan Modra  <amodra@bigpond.net.au>
 620
 621         PR 4448
 622         * config/tc-ppc.c (ppc_insert_operand): Don't increase min for
 623         PPC_OPERAND_PLUS1.
 624
 625 2007-05-01  H.J. Lu  <hongjiu.lu@intel.com>
 626
 627         * config/tc-i386.c (match_template): Check suffix for crc32 in
 628         Intel mdoe.
 629         (process_suffix): Default the suffix of 8bit crc32 to
 630         BYTE_MNEM_SUFFIX.
 631         (check_byte_reg): Skip check for 8bit crc32.
 632
 633 2007-04-30  H.J. Lu  <hongjiu.lu@intel.com>
 634
 635         * config/tc-i386.c (md_assemble): Use register_prefix in
 636         error/warning message.
 637         (check_byte_reg): Likewise.
 638         (check_long_reg): Likewise.
 639         (check_qword_reg): Likewise.
 640         (check_word_reg): Likewise.
 641         (process_operands): Likewise.
 642
 643 2007-04-30  Alan Modra  <amodra@bigpond.net.au>
 644
 645         PR 4436
 646         * config/tc-ppc.c (ppc_insert_operand): Disable range check if
 647         min > max.
 648
 649 2007-04-28  Thiemo Seufer  <ths@networkno.de>
 650
 651         * config/tc-mips.c: Fix comment.
 652
 653 2007-04-26  Anatoly Sokolov <aesok@post.ru>
 654
 655         * config/tc-avr.c (mcu_types): Add support for atmega8hva and
 656         atmega16hva devices. Move at90usb82 device to 'avr5' architecture.
 657         * doc/c-avr.texi: Document new devices.
 658
 659 2007-04-24  Alan Modra  <amodra@bigpond.net.au>
 660
 661         * Makefile.am: Run "make dep-am".
 662         * Makefile.in: Regenerate.
 663
 664 2007-04-23  Nathan Sidwell  <nathan@codesourcery.com>
 665
 666         * config/tc-m68k.c (mcf54455_ctrl): New.
 667         (HAVE_LONG_DISP, HAVE_LONG_CALL, HAVE_LONG_COND): New.
 668         (m68k_archs): Add isac.
 669         (m68k_cpus): Add 54455 family.
 670         (m68k_ip): Split Bg into Bb, Bs, Bg.
 671         (m68k_elf_final_processing): Add ISA_C.
 672         * doc/c-m68k.texi (M680x0 Options): Add isac.
 673
 674 2007-04-22  Alan Modra  <amodra@bigpond.net.au>
 675
 676         * read.c (read_a_source_file): Skip multiple spaces to
 677         cover hack in mmix md_start_line_hook which overwrites a
 678         colon with a space.  Delete sermon and needless assertion.
 679
 680 2007-04-21  Alan Modra  <amodra@bigpond.net.au>
 681
 682         * config/atof-vax.c (atof_vax_sizeof): Change return type to unsigned.
 683         (md_atof): Make number_of_chars unsigned.  Revert last change.
 684         * config/tc-or32.c (md_apply_fix): Delete bogus assertions.
 685         * config/tc-sh.c (sh_optimize_expr): Only define for OBJ_ELF.
 686         * config/tc-sh.h (md_optimize_expr): Likewise.
 687         * config/tc-sh64.c (shmedia_md_pcrel_from_section): Delete bogus
 688         assertion.
 689         * config/tc-xtensa.c (convert_frag_immed_finish_loop): Likewise.
 690
 691 2007-04-21  Nick Clifton  <nickc@redhat.com>
 692
 693         * config/atof-vax.c (md_atof): Fix comparison inside know().
 694
 695         * config/tc-ia64.c (emit_one_bundle): Fix typo.
 696
 697 2007-04-21  Alan Modra  <amodra@bigpond.net.au>
 698
 699         * expr.c (expr): Assert on rankarg, not rank which can be unsigned.
 700         * read.c (read_a_source_file): Remove buffer_limit[-1] assertion.
 701         Don't skip over NUL char.
 702         (pseudo_set): Set X_op for registers to O_register.
 703         * symbols.c (symbol_clone): Remove assertion that sym is defined.
 704         (resolve_symbol_value): Resolve O_register symbols.
 705         * config/tc-i386.c (parse_real_register): Don't use i386_float_regtab.
 706         Instead find st(0) by hash lookup.
 707         * config/tc-ppc.c (ppc_macro): Warning fix.
 708
 709         * as.h (ENABLE_CHECKING): Default define to 0.
 710         (know): Assert if ENABLE_CHECKING.
 711         (struct relax_type): Remove superfluous declaration.
 712         * configure.in (--enable-checking): New.
 713         * configure: Regenerate.
 714         * config.in: Regenerate.
 715         * config/tc-ppc.c (ppc_setup_opcodes): Do checks when ENABLE_CHECKING.
 716         Check for duplicate powerpc_operands entries.
 717
 718 2007-04-20  Nathan Sidwell  <nathan@codesourcery.com>
 719
 720         * config/tc-m68k.c (mcf5253_ctrl): New.
 721         (mcf52223_ctrl): New.
 722         (m68k_cpus): Add 5253, 52221, 52223.
 723
 724         * config/m68k-parse.h (RAMBAR_ALT): New.
 725         * config/tc-m68k.c (mcf5206_ctrl, mcf5307_ctrl): New.
 726         (mcf_ctrl, mcf5208_ctrl, mcf5210a_ctrl, mcf5213_ctrl, mcf52235_ctrl,
 727         mcf5225_ctrl, mcf5235_ctrl, mcf5271_ctrl, mcf5275_ctrl,
 728         mcf5282_ctrl, mcf5329_ctrl, mcf5373_ctrl, mcfv4e_ctrl,
 729         mcf5475_ctrl, mcf5485_ctrl): Add RAMBAR synonym for
 730         RAMBAR1.
 731         (mcf5272_ctrl): Add RAMBAR0, replace add RAMBAR with RAMBAR_ALT.
 732         (m68k_cpus): Adjust 5206, 5206e & 5307 entries.
 733         (m68k_ip) <Case J>: Detect when RAMBAR_ALT should be used.  Add it
 734         to control register mapping.
 735
 736 2007-04-20  Alan Modra  <amodra@bigpond.net.au>
 737
 738         * messages.c (as_internal_value_out_of_range): Fix typo in
 739         error message.  Return after printing domain error.
 740         * config/tc-ppc.c (ppc_insert_operand): Preserve low zero bits
 741         in max when shifting right.
 742
 743 2007-04-20  Alan Modra  <amodra@bigpond.net.au>
 744
 745         * messages.c (as_internal_value_out_of_range): Extend to report
 746         errors for values with invalid low bits set.
 747         * config/tc-ppc.c (ppc_setup_opcodes): Check powerpc_operands bitm
 748         fields.  Check that operands and opcode fields are disjoint.
 749         (ppc_insert_operand): Check operands using mask rather than bit
 750         count.   Check low bits too.  Handle PPC_OPERAND_PLUS1.  Adjust
 751         insertion code.
 752         (md_apply_fix): Adjust for struct powerpc_operand change.
 753
 754 2007-04-19  Paul Brook  <paul@codesourcery.com>
 755
 756         * config/tc-arm.c (md_assemble): Only allow 16-bit instructions on
 757         Thumb-1.  Add sanity check for bogus relaxations.
 758
 759 2007-04-19  Paul Brook  <paul@codesourcery.com>
 760
 761         * config/tc-arm.c (insns): Allow rsb and rsbs on Thumb-1.
 762
 763 2007-04-19  Alan Modra  <amodra@bigpond.net.au>
 764
 765         * Makefile.am: Run "make dep-am".
 766         * Makefile.in: Regenerate.
 767
 768 2007-04-19  Nathan Froyd <froydnj@codesourcery.com>
 769
 770         * doc/c-ppc.texi (PowerPC-Opts): Document -me500, -me500x2, -mspe.
 771
 772 2007-04-18  H.J. Lu <hongjiu.lu@intel.com>
 773
 774         * doc/c-i386.texi; Document .ssse3, .sse4.1, .sse4.2 and .sse4.
 775
 776 2007-04-18  H.J. Lu <hongjiu.lu@intel.com>
 777
 778         * config/tc-i386.c (cpu_arch): Add .sse4.2 and .sse4.
 779         (match_template): Handle operand size for crc32 in SSE4.2.
 780         (process_suffix): Handle operand type for crc32 in SSE4.2.
 781         (output_insn): Support SSE4.2.
 782
 783 2007-04-18  H.J. Lu <hongjiu.lu@intel.com>
 784
 785         * config/tc-i386.c (cpu_arch): Add .sse4.1.
 786         (process_operands): Adjust implicit operand for blendvpd,
 787         blendvps and pblendvb in SSE4.1.
 788         (output_insn): Support SSE4.1.
 789
 790 2007-04-18  Paul Brook  <paul@codesourcery.com>
 791
 792         * config/tc-arm.c (do_t_rsb): Use 16-bit encoding when possible.
 793
 794 2007-04-16  Kaz Kojima  <kkojima@rr.iij4u.or.jp>
 795
 796         * config/tc-sh.c (sh_handle_align):  Call as_bad_where instead
 797         of as_warn_where for misaligned data.
 798
 799 2007-04-15  Kaz Kojima  <kkojima@rr.iij4u.or.jp>
 800
 801         * config/tc-sh.c (align_test_frag_offset_fixed_p): Handle
 802         rs_fill frags.
 803
 804 2007-04-14  Steve Ellcey  <sje@cup.hp.com>
 805
 806         * Makefile.am: Add ACLOCAL_AMFLAGS.
 807         * Makefile.in: Regenerate.
 808
 809 2007-04-14  Kaz Kojima  <kkojima@rr.iij4u.or.jp>
 810
 811         * config/tc-sh.c (align_test_frag_offset_fixed_p): New.
 812         (sh_optimize_expr): Likewise.
 813         * config/tc-sh.h (md_optimize_expr): Define.
 814         (sh_optimize_expr): Prototype.
 815
 816 2007-04-06  Matt Thomas  <matt@netbsd.org>
 817
 818         * config/tc-vax.c (vax_cons): Added to support %pcrel{8,16,32}(exp)
 819         to emit pcrel relocations by DWARF2 in non-code sections.  Borrowed
 820         heavily from tc-sparc.c.  (vax_cons_fix_new): Likewise.
 821
 822 2007-04-04  Kazu Hirata  <kazu@codesourcery.com>
 823
 824         * config/tc-m68k.c (HAVE_LONG_BRANCH): Add fido_a.
 825
 826 2007-04-04  Paul Brook  <paul@codesourcery.com>
 827
 828         * config/tc-arm.c (do_neon_ext): Enforce immediate range.
 829         (insns): Use I15 for vext.
 830
 831 2007-04-04  Paul Brook  <paul@codesourcery.com>
 832
 833         * configure.tgt: Loosen checks for arm uclinux eabi targets.
 834
 835 2007-04-02  Sterling Augustine  <sterling@tensilica.com>
 836
 837         * config/tc-xtensa.c (xtensa_flush_pending_output): Check
 838         outputting_stabs_line_debug.
 839
 840 2007-03-26  Anatoly Sokolov <aesok@post.ru>
 841
 842         * config/tc-avr.c (mcu_types): Add support for at90pwm1, at90usb82,
 843         at90usb162, atmega325p, atmega329p, atmega3250p and atmega3290p
 844         devices.
 845         * doc/c-avr.texi: Document new devices.
 846
 847 2007-04-02  Richard Sandiford  <richard@codesourcery.com>
 848
 849         * doc/as.texinfo: Add -mvxworks-pic to the list of MIPS options.
 850         * doc/c-mips.texi (-KPIC, -mvxworks-pic): Document.
 851         * config/tc-mips.c (md_show_usage): Mention -mvxworks-pic.
 852
 853 2007-03-30  Sterling Augustine  <sterling@tensilica.com>
 854             Bob Wilson  <bob.wilson@acm.org>
 855
 856         * config/tc-xtensa.c (xtensa_move_labels): Remove loops_ok argument.
 857         Do not check is_loop_target flag.
 858         (xtensa_frob_label): Adjust calls to xtensa_move_labels.
 859         (xg_assemble_vliw_tokens): Likewise.  Also avoid calling
 860         xtensa_move_labels for alignment of loop opcodes.
 861
 862 2007-03-30  H.J. Lu  <hongjiu.lu@intel.com>
 863
 864         * config/tc-i386.c (process_suffix): Reindent a bit.
 865
 866 2007-03-30  Paul Brook  <paul@codesourcery.com>
 867
 868         * config/tc-arm.c (encode_thumb2_ldmstm): New function.
 869         (do_t_ldmstm): Generate 16-bit push/pop.  Use encode_thumb2_ldmstm.
 870         (do_t_push_pop):  Use encode_thumb2_ldmstm.
 871
 872 2007-03-29  DJ Delorie  <dj@redhat.com>
 873
 874         * config/tc-m32c.c (rl_for, relaxable): Protect argument.
 875         (md_relax_table): Add entries for ADJNZ macros.
 876         (M32C_Macros): Add ADJNZ macros.
 877         (subtype_mappings): Add entries for ADJNZ macros.
 878         (insn_to_subtype): Check for adjnz and sbjnz insns.
 879         (md_estimate_size_before_relax): Pass insn to insn_to_subtype.
 880         (md_convert_frag): Convert adjnz and sbjnz.
 881
 882 2007-03-29  Nick Clifton  <nickc@redhat.com>
 883
 884         * itbl-ops.c (itbl_entry): Remove unnecessary and excessively long
 885         initialization.
 886         * itbl-ops.h (enum e_processor): Initialise the e_nprocs field
 887         using ITBL_NUMBER_OF_PROCESSORS.
 888         * itbl-parse.y (yyerror): Remove use of redundant macro PARAMS.
 889
 890 2007-03-28  H.J. Lu  <hongjiu.lu@intel.com>
 891
 892         * config/tc-i386.c (build_modrm_byte): For instructions with 2
 893         register operands, encode destination in i.rm.regmem if its
 894         RegMem bit is set.
 895
 896 2007-03-28  Richard Sandiford  <richard@codesourcery.com>
 897             Phil Edwards  <phil@codesourcery.com>
 898
 899         * doc/as.texinfo: Put the contents after the title page rather
 900         than at the end of the document.
 901
 902 2007-03-27  Alan Modra  <amodra@bigpond.net.au>
 903
 904         * NEWS: Mention ".reloc".
 905
 906 2007-03-26  Sterling Augustine  <sterling@tensilica.com>
 907
 908         * config/tc-xtensa.c (xg_translate_idioms): Allow assembly idioms
 909         in FLIX instructions.
 910
 911 2007-03-26  Julian Brown  <julian@codesourcery.com>
 912
 913         * config/tc-arm.c (arm_it): Add immisfloat field.
 914         (parse_qfloat_immediate): Disallow integer syntax for floating-point
 915         immediates. Fix hex immediates, handle 0.0 and -0.0 specially.
 916         (parse_neon_mov): Set immisfloat bit for operand if it parsed as a
 917         float.
 918         (neon_cmode_for_move_imm): Reject non-float immediates for float
 919         operands.
 920         (neon_move_immediate): Pass immisfloat bit to neon_cmode_for_move_imm.
 921
 922 2007-03-26  Julian Brown  <julian@codesourcery.com>
 923
 924         * doc/c-arm.texi: Add documentation for .dn/.qn directives.
 925
 926 2007-03-26  Alan Modra  <amodra@bigpond.net.au>
 927
 928         * doc/as.texinfo (Reloc): Document.
 929         * read.c (potable): Add "reloc".
 930         (s_reloc): New function.
 931         * write.c (reloc_list): New global var.
 932         (resolve_reloc_expr_symbols): New function.
 933         (write_object_file): Call it.
 934         (write_relocs): Process reloc_list.
 935         * write.h (struct reloc_list): New.
 936         (reloc_list): Declare.
 937
 938 2007-03-24  Paul Brook  <paul@codesourcery.com>
 939
 940         * config/tc-arm.c (do_t_ldmstm): Error on Thumb-2 addressing modes.
 941
 942 2007-03-24  Paul Brook  <paul@codesourcery.com>
 943         Mark Shinwell  <shinwell@codesourcery.com>
 944
 945         * config/tc-arm.c (operand_parse_code): Add OP_oRRw.
 946         (parse_operands): Don't expect comma if first operand missing.
 947         Handle OP_oRRw.
 948         (do_srs): Encode register number, checking it is r13.  Update comment.
 949         (insns): Update SRS entries to take a register.
 950
 951 2007-03-23  H.J. Lu  <hongjiu.lu@intel.com>
 952
 953         * config/tc-i386.c (md_begin): Allow '.' in mnemonic.
 954
 955 2007-03-23  Mark Shinwell  <shinwell@codesourcery.com>
 956
 957         * config/tc-arm.c (md_apply_fix): Turn CBZ instructions that
 958         attempt to jump to the next instruction into NOPs.
 959
 960 2007-03-23  Alan Modra  <amodra@bigpond.net.au>
 961
 962         * config/tc-spu.c: Don't include opcode/spu.h.
 963         (md_assemble): Set tc_fix_data.insn_tag and arg_format.
 964         (md_apply_fix): Adjust.
 965         * config/tc-spu.h: Include opcode/spu.h.
 966         (struct tc_fix_info): New.
 967         (TC_FIX_TYPE, TC_INIT_FIX_DATA): Adjust.
 968         (TC_FORCE_RELOCATION): Define.
 969
 970 2007-03-22  Joseph Myers  <joseph@codesourcery.com>
 971
 972         * doc/as.texinfo: Include VERSION_PACKAGE when reporting version.
 973
 974 2007-03-21  H.J. Lu  <hongjiu.lu@intel.com>
 975
 976         * config/tc-i386.c (process_suffix): Check 0x90 instead of
 977         xchg for xchg %rax,%rax.
 978
 979 2007-03-21  H.J. Lu  <hongjiu.lu@intel.com>
 980
 981         * config/tc-i386.c: Replace REX_MODE64, REX_EXTX, REX_EXTY
 982         and REX_EXTZ with REX_W, REX_R, REX_X and REX_B respectively.
 983
 984 2007-03-21  H.J. Lu  <hongjiu.lu@intel.com>
 985
 986         PR binutils/4218
 987         * config/tc-i386.c (match_template): Properly handle 64bit mode
 988         "xchg %eax, %eax".
 989
 990 2007-03-21  Anton Ertl  <anton@mips.complang.tuw>
 991
 992         PR gas/4124
 993         * config/tc-alpha.c (emit_ustX): Fix ustq code generation.
 994
 995 2007-03-21  H.J. Lu  <hongjiu.lu@intel.com>
 996
 997         * Makefile.am: Run dep-am.
 998         * Makefile.in: Regenerated.
 999
1000         * config/tc-i386.c: Don't include "opcodes/i386-opc.h".
1001
1002         * config/tc-i386.h: Include "opcodes/i386-opc.h".
1003         (NOP_OPCODE): Removed.
1004         (template): Likewise.
1005
1006 2007-03-21  Andreas Schwab  <schwab@suse.de>
1007
1008         * config/tc-i386.h (NOP_OPCODE): Restore.
1009
1010 2007-03-18  Mark Shinwell  <shinwell@codesourcery.com>
1011
1012         * config/tc-arm.c (do_mul): Don't warn about overlapping
1013         Rd and Rm operands when assembling for v6 or above.
1014         Correctly capitalize register names in the messages.
1015         (do_mlas): Likewise.  Delete spurious blank line.
1016
1017 2007-03-16  Kazu Hirata  <kazu@codesourcery.com>
1018
1019         * config/tc-m68k.c (m68k_cpus): Add an entry for fidoa.
1020
1021 2007-03-15  H.J. Lu  <hongjiu.lu@intel.com>
1022
1023         * config/tc-i386.c (md_begin): Use i386_regtab_size to scan
1024         i386_regtab.
1025         (parse_register): Use i386_regtab_size instead of ARRAY_SIZE
1026         on i386_regtab.
1027
1028 2007-03-15  Alexandre Oliva  <aoliva@redhat.com>
1029
1030         PR gas/4184
1031         * app.c (do_scrub_chars): PUT after setting states.
1032
1033 2007-03-15  H.J. Lu  <hongjiu.lu@intel.com>
1034
1035         * Makefile.am: Run "make dep-am".
1036         * Makefile.in: Regenerated.
1037
1038         * config/tc-i386.c: Include "opcodes/i386-opc.h" instead of
1039         "opcode/i386.h".
1040         (md_begin): Check reg_name != NULL for the last entry in
1041         i386_regtab.
1042
1043         * config/tc-i386.h: Move many entries to opcode/i386.h and
1044         opcodes/i386-opc.h.
1045
1046         * configure.in (need_opcodes): Set true for i386.
1047         * configure: Regenerated.
1048
1049 2007-03-15  H.J. Lu  <hongjiu.lu@intel.com>
1050
1051         * Makefile.am (REPORT_BUGS_TO): Removed.
1052         (INCLUDES): Remove -DREPORT_BUGS_TO.
1053         * Makefile.in: Regenerated.
1054
1055         * configure.in (--with-bugurl): Removed.
1056         * configure: Regenerated.
1057
1058         * doc/Makefile.am (as_TEXINFOS): Remove gasver.texi.
1059         (AM_MAKEINFOFLAGS): Add -I ../../bfd/doc.
1060         (TEXI2DVI): Likewise.
1061         (gasver.texi): Removed.
1062         (MOSTLYCLEANFILES): Remove gasver.texi.
1063         (as.1): Don't depend on gasver.texi.
1064         * doc/Makefile.in: Regenerated.
1065
1066         * doc/as.texi: Include bfdver.texi instead of gasver.texi.
1067
1068 2007-03-14  Daniel Jacobowitz  <dan@codesourcery.com>
1069
1070         * config/tc-arm.c (arm_copy_symbol_attributes): New.
1071         * config/tc-arm.h (arm_copy_symbol_attributes): Declare.
1072         (TC_COPY_SYMBOL_ATTRIBUTES): Define.
1073         * gas/symbols.c (copy_symbol_attributes): Use
1074         TC_COPY_SYMBOL_ATTRIBUTES.
1075
1076 2007-03-14  Paul Brook  <paul@codesourcery.com>
1077
1078         * config/tc-arm.c (T16_32_TAB): Fix dec_sp encoding.
1079
1080 2007-03-14  Alan Modra  <amodra@bigpond.net.au>
1081
1082         PR 4029
1083         * write.c (relax_segment): Insert extra alignment padding
1084         to break infinite relax loop when given impossible
1085         gcc_except_table assembly.
1086
1087 2007-03-12  H.J. Lu  <hongjiu.lu@intel.com>
1088
1089         * config/tc-i386.c (md_assemble): Use Opcode_XXX instead of XXX
1090         on i.tm.base_opcode.
1091         (match_template): Likewise.
1092         (process_operands): Use ~0x3 mask to match MOV_AX_DISP32.
1093
1094         * config/tc-i386.h (Opcode_D): New.
1095         (Opcode_FloatR): Likewise.
1096         (Opcode_FloatD): Likewise.
1097         (D): Redefined.
1098         (W): Likewise.
1099         (FloatMF): Likewise.
1100         (FloatR): Likewise.
1101         (FloatD): Likewise.
1102
1103 2007-03-09  Alexandre Oliva  <aoliva@redhat.com>
1104
1105         * app.c (do_scrub_chars): Recognize comments after # line "file".
1106         * read.c (get_linefile_number): New.
1107         (s_app_line): Accept ill-formed .linefile lines as comments.
1108
1109 2007-03-09  Alan Modra  <amodra@bigpond.net.au>
1110
1111         * config/tc-i386.h (WORKING_DOT_WORD): Define.
1112
1113 2007-03-09  Alexandre Oliva  <aoliva@redhat.com>
1114
1115         * app.c (do_scrub_chars): Turn #<line>"file"flags into .linefile.
1116         * as.h (new_logical_line_flags): New.
1117         * input-scrub.c (new_logical_line): Turned into wrapper for...
1118         (new_logical_line_flags): this.  Handle flags.
1119         * read.c (potable): Add linefile.  Adjust appline argument.
1120         (s_app_file): Fake .appfiles no more.
1121         (s_app_line): For .linefile, accept file name and flags.
1122
1123 2007-03-08  Alan Modra  <amodra@bigpond.net.au>
1124
1125         * symbols.c (symbol_relc_make_sym): Comment typo fixes.
1126
1127 2007-03-08  Alan Modra  <amodra@bigpond.net.au>
1128
1129         * Makefile.am: Run "make dep-am".
1130         * Makefile.in: Regenerate.
1131         * po/POTFILES.in: Regenerate.
1132
1133 2007-03-07  Joseph Myers  <joseph@codesourcery.com>
1134
1135         * configure.in (REPORT_BUGS_TEXI): Define to Texinfo version of
1136         bug-reporting URL.
1137         * doc/Makefile.am (gasver.texi): Define BUGURL.
1138         * doc/as.texinfo: Use BUGURL.
1139         * Makefile.in, configure, doc/Makefile.in: Regenerate.
1140
1141 2007-03-06  Andreas Krebbel  <krebbel1@de.ibm.com>
1142
1143         * config/tc-s390.c (md_parse_option): z9-ec option added.
1144
1145 2007-03-02  Paul Brook  <paul@codesourcery.com>
1146
1147         * config/tc-arm.c (relax_immediate): Always return positive values.
1148         (relaxed_symbol_addr): New function.
1149         (relax_adr, relax_branch): Use it.
1150         (arm_relax_frag): Pass strect argument.  Adjust infinite loop check.
1151
1152 2007-03-01  Joseph Myers  <joseph@codesourcery.com>
1153
1154         * as.c (parse_args): Update copyright date.
1155
1156 2007-02-28  Nathan Sidwell  <nathan@codesourcery.com>
1157
1158         * configure.tgt (sh-*-uclinux, sh[12]-*-uclinux): Specify as elf.
1159
1160 2007-02-28  Nick Clifton  <nickc@redhat.com>
1161
1162         PR gas/3797
1163         * config/tc-d10v.c (do_assemble): Do not generate error messages,
1164         just return -1 whenever a problem is encountered.
1165         (md_assemble): If do_assemble returns -1 generate a non-fatal
1166         error message and return.
1167
1168         PR gas/2623
1169         * config/tc-msp430.c (line_separator_char): Change to '{'.
1170
1171 2007-02-27  Alan Modra  <amodra@bigpond.net.au>
1172
1173         * config/tc-m68hc11.c (fixup24): Correct fixup size.
1174         (build_jump_insn): Likewise.
1175         (build_insn): Likewise.
1176         (s_m68hc11_relax): Likewise.
1177
1178 2007-02-27  Alan Modra  <amodra@bigpond.net.au>
1179
1180         * config/obj-elf.c (elf_frob_file): frag_wane any new frags.
1181
1182 2007-02-25  Mark Shinwell  <shinwell@codesourcery.com>
1183
1184         * config/tc-arm.c (do_vfp_nsyn_pop): Use fldmias/fldmiad.
1185
1186 2007-02-23  Alan Modra  <amodra@bigpond.net.au>
1187
1188         * config/tc-mn10300.c (md_convert_frag): Correct fixup size.
1189         (md_assemble): Likewise.
1190
1191 2007-02-22  Alan Modra  <amodra@bigpond.net.au>
1192
1193         * write.c (size_seg): Always clear SEC_RELOC here.
1194         (install_reloc): New function, extracted from..
1195         (write_relocs): ..here.  Combine RELOC_EXPANSION_POSSIBLE code
1196         with !RELOC_EXPANSION_POSSIBLE code.  Don't add fr_offset when
1197         testing frag size.  Set SEC_RELOC here.
1198
1199 2007-02-21  Alan Modra  <amodra@bigpond.net.au>
1200
1201         PR 4082
1202         * config/tc-avr.h (TC_FX_SIZE_SLACK): Define.
1203
1204 2007-02-20  Thiemo Seufer  <ths@mips.com>
1205
1206         * doc/c-mips.texi: Document 74kc, 74kf, 74kx.
1207
1208 2007-02-20  Thiemo Seufer  <ths@mips.com>
1209
1210         * config/tc-mips.c (mips_cpu_info_table): Add 74K configurations.
1211
1212 2007-02-20  Thiemo Seufer  <ths@mips.com>
1213             Chao-Ying Fu  <fu@mips.com>
1214
1215         * config/tc-mips.c (mips_set_options, mips_opts, file_ase_dspr2,
1216         ISA_SUPPORTS_DSPR2_ASE, MIPS_CPU_ASE_DSPR2): Add DSP R2 ASE support.
1217         (macro_build): Add case '2'.
1218         (macro): Expand M_BALIGN to nop, packrl.ph or balign.
1219         (validate_mips_insn): Add support for balign instruction.
1220         (mips_ip): Handle DSP R2 instructions. Support balign instruction.
1221         (OPTION_DSPR2, OPTION_NO_DSPR2, OPTION_COMPAT_ARCH_BASE,
1222         md_parse_option, mips_after_parse_args): Add -mdspr2 and -mno-dspr2
1223         command line options.
1224         (s_mipsset): Add support for .set dspr2 and .set nodspr2 directives.
1225         (md_show_usage): Add -mdspr2 and -mno-dspr2 help output.
1226         * doc/c-mips.texi, doc/as.texinfo: Document -mdspr2, -mno-dspr2,
1227         .set dspr2, .set nodspr2.
1228
1229 2007-02-20  Nathan Sidwell  <nathan@codesourcery.com>
1230
1231         * config/tc-m68k.c (mcf5210a_ctrl, mcf52235_ctrl, mcf5225_ctrl): New.
1232         (m68k_cpus): Add 5210a..5211a, 52230..52235 5224..5225.
1233
1234 2007-02-18  Alan Modra  <amodra@bigpond.net.au>
1235
1236         * write.c (TC_FX_SIZE_SLACK): Define.
1237         (write_relocs): Reinstate check for fixup within frag.
1238         * config/tc-bfin.h (TC_FX_SIZE_SLACK): Define.
1239         * config/tc-h8300.h (TC_FX_SIZE_SLACK): Define.
1240         * config/tc-mmix.h (TC_FX_SIZE_SLACK): Define.
1241         * config/tc-sh.h (TC_FX_SIZE_SLACK): Define.
1242         * config/tc-xstormy16.h (TC_FX_SIZE_SLACK): Define.
1243
1244 2007-02-17  Mark Mitchell  <mark@codesourcery.com>
1245             Nathan Sidwell  <nathan@codesourcery.com>
1246             Vladimir Prus  <vladimir@codesourcery.com
1247             Joseph Myers  <joseph@codesourcery.com>
1248
1249         * configure.in (--with-bugurl): New option.
1250         * configure: Regenerate.
1251         * dep-in.sed: Remove bin-bugs.h.
1252         * Makefile.am (REPORT_BUGS_TO): Define.
1253         (INCLUDES): Define REPORT_BUGS_TO.
1254         (DEP_INCLUDES): Likewise.
1255         ($(OBJS)): No longer depend on bin-bugs.h.
1256         * Makefile.in: Regenerate.
1257         * doc/Makefile.in: Regenerate.
1258         * as.c (show_usage): Don't print empty REPORT_BUGS_TO.
1259         * as.h: Remove include of bin-bugs.h.
1260
1261 2007-02-17  Alan Modra  <amodra@bigpond.net.au>
1262
1263         * write.c: White space fixes.
1264         (fixup_segment): Move symbol_mri_common_p adjustments..
1265         (write_relocs): ..and symbol_equated_reloc_p adjustments..
1266         (adjust_reloc_syms): ..to here.
1267
1268 2007-02-16  Alan Modra  <amodra@bigpond.net.au>
1269
1270         * subsegs.c (subseg_change, subseg_get): Use xcalloc rather than
1271         xmalloc, memset.  Don't bother assigning NULL to known zero mem.
1272         (subseg_set_rest): Remove unnecessary cast.
1273         * write.c: Include libbfd.h.  Replace PTR with void * throughout.
1274         Remove unnecessary forward declarations and casts.
1275         (set_symtab): Delete extern bfd_alloc.
1276         (fixup_segment): Move.
1277
1278 2007-02-15  Nathan Sidwell  <nathan@codesourcery.com>
1279
1280         * config/m68k-parse.h (m68k_register): Add ROMBAR0, ASID.
1281         * config/tc-m68k.c (mcfv4e_ctrl): Add ColdFire specific names.
1282         (mcf5475_ctrl, mcf5485_ctrl): New.
1283         (m68k_cpus): Use mcf5485_ctrl and mcf5485_ctrl for those families.
1284         (m68k_ip): Add ASID, MMUBAR, ROMBAR0 handling.
1285         (init_table): Add asid, mmubar, adjust rombar0.
1286
1287 2007-02-14  Alan Modra  <amodra@bigpond.net.au>
1288
1289         * config/tc-i386.h (Seg2ShortForm, Seg3ShortForm): Delete.
1290         * config/tc-i386.c: Wrap overly long lines, whitespace fixes.
1291         (process_operands): Move old Seg2ShortForm and Seg3ShortForm
1292         code, and test for these insns using a combination of
1293         opcode_modifier and operand_types.
1294
1295 2007-02-07  Paul Brook  <paul@codesourcery.com>
1296
1297         * configure.tgt: Add arm*-*-uclinux-*eabi.
1298
1299 2007-02-05  Dave Brolley  <brolley@redhat.com>
1300             Richard Sandiford  <rsandifo@redhat.com>
1301             DJ Delorie  <dj@redhat.com>
1302             Stan Cox  <scox@redhat.com>
1303             Jim Blandy  <jimb@redhat.com>
1304             Nick Clifton  <nickc@redhat.com>
1305             Jim Wilson  <wilson@redhat.com>
1306             Frank Ch. Eigler  <fche@redhat.com>
1307             Graydon Hoare  <graydon@redhat.com>
1308             Ben Elliston  <bje@redhat.com>
1309             John Healy  <jhealy@redhat.com>
1310             Richard Henderson  <rth@redhat.com>
1311
1312         * Makefile.am (CPU_TYPES): Add mep.
1313         (TARGET_CPU_CFILES): Add tc-mep.c.
1314         (TARGET_CPU_HFILES): Add tc-mep.h.
1315         (DEPTC_mep_elf): New variable.
1316         (DEPTC_mep_coff): Likewise.
1317         (DEPOBJ_mep_coff, DEPOBJ_mep_elf, DEP_mep_coff, DEP_mep_elf): Likewise.
1318         * configure.in: Support mep.
1319         * configure.tgt: Likewise.
1320         * config/tc-mep.c: New file.
1321         * config/obj-elf.c: New file.
1322         * config/tc-mep.c: New file.
1323         * config/tc-mep.h: New file.
1324         * testsuite/gas/mep: New testsuite with content.
1325         * Makefile.in: Regenerate.
1326         * configure: Regenerate.
1327
1328 2007-02-05  Dave Brolley  <brolley@redhat.com>
1329
1330         * cgen.c (gas_cgen_install_complex_reloc): Removed.
1331         (complex_reloc_installation_howto): Removed.
1332
1333 2007-02-05  Dave Brolley  <brolley@redhat.com>
1334             Graydon Hoare  <graydon@redhat.com>
1335             DJ Delorie  <dj@redhat.com>
1336             Catherine Moore  <clm@redhat.com>
1337             Michael Chastain  <chastain@redhat.com>
1338             Frank Ch. Eigler  <fche@redhat.com>
1339
1340         * symbols.c (use_complex_relocs_for): New, to decide
1341         when to use complex relocs. Add signed RELC support.
1342         (resolve_symbol_value): Call use_complex_relocs_for. Unconditionally
1343         encode expression symbols as mangled complex relocation symbols (when
1344         compiled with -DOBJ_COMPLEX_RELOC).
1345         (symbol_relc_make_sym,value,expr): New traversal/conversion routines.
1346         * cgen.c (gas_cgen_md_apply_fix3):  Only set signed_p if RELC. Call
1347         encode_addend with new args. Modify to get start, length from
1348         ifield whenever it is set. Also change condition on which
1349         self-describing relocs are encoded. Add hook into
1350         gas_cgen_encode_addend.
1351         (queue_fixup_recursively): Add signed RELC support. Change from masked
1352         expr to trunc flag. Restore assignment of sub-field value to
1353         temporary in fixups array. Reflect changed meaning of last arg to
1354         queue_fixup_recursively.
1355         (fixup): Add cgen_maybe_multi_ifield member.
1356         (make_right_shifted_expr): New function.
1357         (queue_fixup): Change to recursive function that fragments
1358         fixups if operand has a multi-ifield.
1359         (gas_cgen_parse_operand): Add RELC code to wrap expressions in
1360         symbols, call weak_operand_overflow_check, and fragment call
1361         queue_fixup with operand fields.
1362         (gas_cgen_finish_insn) Modify to manage ifield pointer.
1363         (weak_operand_overflow_check): New function to try to select
1364         insns correctly.
1365         (gas_cgen_encode_addend): New function for relc.
1366         (gas_cgen_install_complex_reloc): Likewise.
1367         (gas_cgen_tc_gen_reloc): Add hook into gas_cgen_install_complex_reloc.
1368         * write.h (struct fix): Add msb_field_p to fx_cgen sub-struct. Add
1369         cgen_maybe_multi_ifield field to fx_cgen substructure.
1370         * cgen.h (GAS_CGEN_MAX_FIXUPS): Bump from 3 up to 32.
1371         * symbols.h (symbol_relc_make_sym,value,expr): New prototypes.
1372
1373 2007-02-03  DJ Delorie  <dj@delorie.com>
1374
1375         * config/tc-m32c.c (m32c_cons_fix_new): New.  Added to support 3
1376         byte relocs.
1377         * config/tc-m32c.h (TC_CONS_FIX_NEW): Define.
1378         (m32c_cons_fix_new): Prototype.
1379
1380 2007-02-02  Bob Wilson  <bob.wilson@acm.org>
1381
1382         * config/tc-xtensa.c (xg_build_to_insn): Use tinsn_init.
1383         (xg_expand_assembly_insn, istack_push_space, istack_pop): Likewise.
1384
1385 2007-02-02  Bob Wilson  <bob.wilson@acm.org>
1386
1387         * config/tc-xtensa.c (SUFFIX_MAP, suffix_relocs): New.
1388         (xtensa_elf_suffix): Use suffix_relocs instead of local mapping table.
1389         (map_suffix_reloc_to_operator): New.
1390         (map_operator_to_reloc): New.
1391         (expression_maybe_register): Fix incorrect test of return value from
1392         xtensa_elf_suffix.  Rearrange to use map_suffix_reloc_to_operator.
1393         (xg_assemble_literal, convert_frag_immed): Use map_operator_to_reloc.
1394
1395 2007-02-02  Bob Wilson  <bob.wilson@acm.org>
1396
1397         * config/xtensa-istack.h (struct tinsn_struct): Delete fixup field.
1398         (tinsn_get_tok): Delete prototype.
1399         * config/tc-xtensa.c (tinsn_get_tok): Delete.
1400
1401 2007-02-02  Bob Wilson  <bob.wilson@acm.org>
1402
1403         * config/xtensa-relax.h (struct build_instr): Delete id field.
1404         * config/xtensa-relax.c (widen_spec_list): Remove zeros from LITERAL
1405         and LABEL tokens.
1406         (append_literal_op, append_label_op): Remove litnum/labnum arguments;
1407         set op_data fields to zero.
1408         (parse_id_constant): Delete.
1409         (build_transition): Remove code to handle numbered literals and labels.
1410
1411 2007-02-02  Bob Wilson  <bob.wilson@acm.org>
1412
1413         * config/xtensa-relax.c (build_transition): Remove code after as_fatal.
1414         (build_transition_table): Likewise.
1415
1416 2007-02-01  Bob Wilson  <bob.wilson@acm.org>
1417
1418         * config/tc-xtensa.c (xg_add_opcode_fix, md_apply_fix): Delete use of
1419         fx_tcbit.
1420         * config/tc-xtensa.h (TC_FORCE_RELOCATION_LOCAL): Remove.
1421
1422 2007-02-02  Alan Modra  <amodra@bigpond.net.au>
1423
1424         * write.h (struct fix <fx_pcrel_adjust, fx_size>): Move.
1425         (struct fix <fx_plt>): Rename to tcbit2.
1426         * write.c (fix_new_internal): Adjust.
1427         (TC_FORCE_RELOCATION_LOCAL): Don't test fx_plt.
1428         * config/tc-arm.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1429         * config/tc-cris.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1430         * config/tc-i386.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1431         * config/tc-i960.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1432         * config/tc-sh.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1433         * config/tc-sh64.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1434         * config/tc-sparc.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1435         * config/tc-msp430.c (msp430_force_relocation_local): Likewise.
1436         * config/tc-ia64.c (emit_one_bundle): Don't set fx_plt.
1437         * config/tc-ia64.h (TC_FORCE_RELOCATION_LOCAL): Don't test fx_plt.
1438         Instead, compare fx_r_type.
1439         * config/tc-xtensa.c (xg_add_opcode_fix, md_apply_fix): Use
1440         fx_tcbit in place of fx_plt.
1441         * config/tc-xtensa.h (TC_FORCE_RELOCATION_LOCAL): Define.
1442         * doc/internals.texi (TC_FORCE_RELOCATION_LOCAL): Remove reference
1443         to fx_plt.
1444
1445 2007-01-30  Nick Clifton  <nickc@redhat.com>
1446
1447         * as.c (main): Mark symbols created via the --defsym command line
1448         option as volatile so that they can be overridden later on by a
1449         .set directive.  This maintains compatibility with the behaviour
1450         of earlier versions of the assembler.
1451         * doc/as.texinfo (--defsym): Document that the defined symbol's
1452         value can be overridden via a .set directive.
1453
1454 2007-01-28  H.J. Lu  <hongjiu.lu@intel.com>
1455
1456         * config/tc-i386.c (swap_imm_operands): Renamed to ...
1457         (swap_2_operands): This.  Take 2 ints.
1458         (md_assemble): Updated.
1459         (swap_operands): Call swap_2_operands to swap 2 operands.
1460
1461 2007-01-24  DJ Delorie  <dj@redhat.com>
1462
1463         * config/tc-m32c.c (md_pseudo_table): Add .3byte.
1464
1465 2007-01-22  Nick Clifton  <nickc@redhat.com>
1466
1467         PR gas/3871
1468         * tc-score.c: Remove unnecessary uses of _().
1469         Make the err_msg[] a file level local array in order to save
1470         storage space.
1471         Remove unnecessary sprintf()s.
1472
1473 2007-01-18  Mei Ligang  <ligang@sunnorth.com.cn>
1474
1475         PR gas/3871
1476         * config/tc-score.c : Using _() for const string.
1477         Do not assign inst.error with a local string pointer.
1478         (md_section_align): Pad section.
1479
1480 2007-01-13  H.J. Lu  <hongjiu.lu@intel.com>
1481
1482         * config/tc-i386.c (build_modrm_byte): Check number of operands
1483         when procssing memory/register operand.
1484
1485 2007-01-12  Nick Clifton  <nickc@redhat.com>
1486
1487         PR gas/3856
1488         * macro.c (expand_irp): Do not ignore spaces inside quoted
1489         strings.
1490
1491 2007-01-12  Alan Modra  <amodra@bigpond.net.au>
1492
1493         * config/tc-spu.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
1494         * config/tc-m32r.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
1495         * config/tc-mn10300.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
1496         (TC_FORCE_RELOCATION): Define.
1497         (TC_FORCE_RELOCATION_LOCAL): Define.
1498         * config/tc-mn10300.c (mn10300_fix_adjustable): Adjust.
1499
1500 2007-01-12  Alan Modra  <amodra@bigpond.net.au>
1501
1502         * input-file.c (input_file_open): Check fgets return.
1503
1504 2007-01-11  Paul Brook  <paul@codesourcery.com>
1505
1506         * config/tc-arm.c (do_t_add_sub): Use Rd and Rs.
1507
1508 2007-01-11  Nick Clifton  <nickc@redhat.com>
1509
1510         PR gas/3707
1511         * config/tc-arm.c (md_begin): Cope with an NULL mcpu_fpu_opt
1512         variable.
1513
1514         * config/tc-mcore.c (md_number_to_chars): Use
1515         number_to_chars_{big|little}endian.
1516
1517 2007-01-08  Kazu Hirata  <kazu@codesourcery.com>
1518
1519         * config/tc-m68k.c (m68k_archs, m68k_cpus): Treat Fido as an
1520         architecture by itself.
1521         (m68k_ip): Don't issue a warning for tbl instructions on fido.
1522         (m68k_elf_final_processing): Treat Fido as an architecture by
1523         itself.
1524
1525 2007-01-08  Kai Tietz   <kai.tietz@onevision.com>
1526
1527         * configure.tgt: Renamed target x86_64-*-mingw64 to x86_64-*-mingw*
1528
1529 2007-01-05  H.J. Lu  <hongjiu.lu@intel.com>
1530
1531         * config/tc-i386.c (set_intel_syntax): Update set_intel_syntax
1532         depending on allow_naked_reg.
1533
1534 2007-01-04  Paul Brook  <paul@codesourcery.com>
1535
1536         * config/tc-arm.c (do_cpsi): Set mmod bit for 2 argument form.
1537
1538 2007-01-04  H.J. Lu  <hongjiu.lu@intel.com>
1539
1540         PR gas/3830
1541         * config/tc-i386.c (register_prefix): New.
1542         (set_intel_syntax): Set set_intel_syntax to "" if register
1543         prefix isn't needed.
1544         (check_byte_reg): Use register_prefix for error message.
1545         (check_long_reg): Likewise.
1546         (check_qword_reg): Likewise.
1547         (check_word_reg): Likewise.
1548
1549 2007-01-04  Julian Brown  <julian@codesourcery.com>
1550
1551         * config/tc-arm.c (do_neon_shl_imm): Swap rN, rM.
1552         (do_neon_qshl_imm): Likewise.
1553         (do_neon_rshl): New function. Handle rounding variants of
1554         v{q}shl-by-register.
1555         (insns): Use do_neon_rshl for vrshl, vqrshl.
1556
1557 2007-01-04  Paul Brook  <paul@codesourcery.com>
1558
1559         * config/tc-arm.c (NEON_ENC_TAB): Fix encoding of vclt, vcle, vaclt
1560         and vacle.
1561
1562 2007-01-03  H.J. Lu  <hongjiu.lu@intel.com>
1563
1564         * config/tc-i386.c (swap_operands): Remove branches.
1565
1566 2007-01-03  H.J. Lu  <hongjiu.lu@intel.com>
1567
1568         * config/tc-i386.c: Update copyright year.
1569         * config/tc-i386.h: Likewise.
1570
1571 2007-01-03  H.J. Lu  <hongjiu.lu@intel.com>
1572
1573         * config/tc-i386.c (smallest_imm_type): Return unsigned int
1574         instead of int.
1575
1576 2007-01-03  H.J. Lu  <hongjiu.lu@intel.com>
1577
1578         * config/tc-i386.c: Convert to ISO C90 formatting
1579         * config/tc-i386.h: Likewise.
1580
1581 2007-01-03  David Daney  <ddaney@avtrex.com>
1582
1583         * config/tc-mips.c (md_show_usage):  Clean up -mno-shared
1584         documentation.
1585
1586 For older changes see ChangeLog-2006
1587 \f
1588 Local Variables:
1589 mode: change-log
1590 left-margin: 8
1591 fill-column: 74
1592 version-control: never
1593 End: