gas/ChangeLog

   1 2007-10-11  H.J. Lu  <hongjiu.lu@intel.com>
   2
   3         * doc/c-i386.texi: Update which instruction's operands are
   4         swapped.
   5
   6 2007-10-11  Nick Clifton  <nickc@redhat.com>
   7
   8         PR gas/5155
   9         * config/tc-msp430.c: Fix spelling typos.
  10
  11 2007-10-11  Nick Clifton  <nickc@redhat.com>
  12
  13         * doc/as.texinfo (Type): Fix typo: STT_FUNC not STT_FUNCTION.
  14
  15 2007-10-08  Maciej W. Rozycki  <macro@linux-mips.org>
  16
  17         * config/tc-mips.c (AT): Rename to...
  18         (ATREG): ... this.
  19         (AT): New definition.
  20         (mips_set_options): Rename "noat" to "at"; change the type.
  21         (mips_opts): Update accordingly.
  22         (append_insn): Likewise.
  23         (macro_build_ldst_constoffset): Likewise.
  24         (load_address): Likewise.
  25         (macro, macro2): Likewise.
  26         (s_mipsset): Handle ".set at=REG".  Update handling of ".set at"
  27         and ".set noat".
  28
  29 2007-10-08  Nick Clifton  <nickc@redhat.com>
  30
  31         * doc/as.texinfo (Previous): Clarify explanation of the behaviour
  32         of this pseudo-op and add a couple of examples.
  33
  34 2007-10-08  Nick Clifton  <nickc@redhat.com>
  35
  36         PR gas/5121 gas/5122 gas/5123
  37         * Makefile.am (CFILES): Add cgen.c
  38         (TARGET_CPU_CFILES): Add tc-iq2000.c, tc-maxq.c, tc-mt.c,
  39         tc-tic4x.c and xtensa-relax.c.
  40         (TARGET_CPU_HFILES): Add tc-iq2000.h, tc-maxq.h, tc-mt.h,
  41         tc-tic4x.h and xtensa-relax.h.
  42         (TARG_ENV_HFILES): Remove te-aux.h, te-delta.h, te-delt88.h,
  43         te-ic960.h, te-linux.h.  Add te-aix5.h, te-armeabi.h,
  44         te-freebsd.h, te-gnu.h, te-interix.h, te-vxworks.h.
  45         (CONFIG_ATOF_CFILES): New variable.
  46         (POTFILES): Add CONFIG_ATOF_CFILES to dependencies.  Fix typo with
  47         dependency upon TARG_ENV_HFILES.
  48         (DEPTC): Do not put "#include opcodes/<foo>-desc.h" into
  49         cgen-desc.h when foo-desc.h does not exit.
  50         Run make dep-am.
  51         * Makefile.in: Regenerate.
  52         * doc/Makefile.in: Regenerate.
  53         * po/POTFILES.in: Regenerate.
  54         PR gas/5124 gas/5125
  55         * po/es.po: Regenerate.
  56         * po/fr.po: Regenerate.
  57         * po/gas.pot: Regenerate.
  58         * po/rw.po: Regenerate.
  59         * po/tr.po: Regenerate.
  60         * config/obj-elf.c (obj_elf_vtable_inherit): Allow for translation
  61         of error messages.
  62         PR gas/5126
  63         * config/obj-som.c: Likewise.
  64         PR gas/5129
  65         * config/tc-arc.c: Likewise.
  66         PR gas/5131 gas/5132
  67         * config/tc-arm.c: Likewise.
  68         PR gas/5137
  69         * config/tc-bfin.c: Likewise.
  70         PR gas/5143
  71         * config/tc-frv.c: Likewise.
  72         PR gas/5142
  73         * config/tc-dlx.c: Likewise.
  74
  75 2007-10-08  Eric B. Weddington  <eweddington@cso.atmel.com>
  76
  77         * config/tc-avr.c (mcu_types): Add new devices: ATtiny43U,
  78         ATtiny48, AT90PWM216, AT90PWM316.
  79         * doc/c-avr.texi: Document new devices.
  80
  81 2007-10-08  Nick Clifton  <nickc@redhat.com>
  82
  83         PR gas/5133
  84         * config/tc-arm.c (md_apply_fix): Correct error message.
  85         PR gas/5134
  86         * config/tc-arm.c (md_apply_fix): Likewise.
  87         PR gas/5136
  88         * config/tc-bfin.c (md_apply_fix): Fix error message.
  89         PR gas/5135
  90         (Expr_Node_Gen_Reloc_R): Fix spelling typos in error messages.
  91
  92 2007-10-05  H.J. Lu  <hongjiu.lu@intel.com>
  93
  94         * config/tc-i386.c (build_modrm_byte): Check the first 2 8bit
  95         immediate operands directly for instructions with 4 operands.
  96
  97 2007-10-04  H.J. Lu  <hongjiu.lu@intel.com>
  98
  99         PR gas/5109
 100         * config/tc-i386.c (process_suffix): Clear QWORD suffix if it
 101         is ignored in Intel mode.
 102
 103 2007-10-04  Helge Deller  <deller@gmx.de>
 104
 105         * read.c (potable): Add string8, string16, string32 and string64.
 106         Add bit size for stringer function.
 107         (stringer_append_char): New.
 108         (stringer): Use stringer_append_char().
 109         * config/obj-coff.c (obj_coff_ident): Add bit size for stringer function.
 110         * config/obj-elf.c (obj_elf_ident): Likewise.
 111         * config/tc-alpha.c (s_alpha_stringer): Likewise.
 112         * config/tc-dlx.c (dlx_pseudo_table): Likewise.
 113         * config/tc-hppa.c (pa_stringer): Likewise.
 114         * config/tc-ia64.c (md_pseudo_table, pseudo_opcode): Likewise.
 115         * config/tc-m68hc11.c (md_pseudo_table): Likewise.
 116         * config/tc-mcore.c (md_pseudo_table): Likewise.
 117         * config/tc-mips.c (mips_pseudo_table): Likewise.
 118         * config/tc-spu.c (md_pseudo_table): Likewise.
 119         * config/tc-s390.c (md_pseudo_table): Likewise. Replace '2' by '1'.
 120         * doc/as.texinfo (ABORT): Fix identing.
 121         (String): Document new string8, string16, string32, string64
 122         functions.
 123         * NEWS: Mention the new feature.
 124
 125 2007-10-03  Nick Clifton  <nickc@redhat.com>
 126
 127         PR gas/5078
 128         * config/tc-avr.c (avr_get_constant): Extend error message to
 129         mention that the constant must be positive.
 130
 131 2007-10-03  Nick Clifton  <nickc@redhat.com>
 132
 133         * config/tc-avr.c (avr_get_constant):
 134         PR gas/5089
 135         * config/tc-arm.c (s_arm_unwind_handlerdata): Fix spelling typo.
 136         PR gas/5090
 137         (md_assemble): Fix spelling typo.
 138
 139 2007-10-03  Alan Modra  <amodra@bigpond.net.au>
 140
 141         PR 4303
 142         * stabs.c (aout_process_stab): Set BSF_DEBUGGING.
 143
 144 2007-10-01  M R Swami Reddy <MR.Swami.Reddy@nsc.com>
 145
 146         * config/tc-cr16.c: Replaced 'tabs' with white spaces and
 147         added R_CR16_DISP8 as default reloc type for b<cc> instructions.
 148
 149 2007-09-30  H.J. Lu  <hongjiu.lu@intel.com>
 150
 151         PR gas/5080
 152         * config/tc-i386.c (check_long_reg): Also handle cvttss2si.
 153         (check_qword_reg): Also handle cvttsd2si.
 154
 155 2007-09-27  Kazu Hirata  <kazu@codesourcery.com>
 156
 157         * config/m68k-parse.h (m68k_register): Use MBO instead of MBB.
 158         (last_movec_reg): Change to MBO.
 159         * config/tc-m68k.c (fido_ctrl): Use MBO instead of MBB.
 160         (m68k_ip): Use MBO instead of MBO.
 161         (init_table): Use MBO instead of MBO.  Add an entry for mbo.
 162
 163 2007-09-26  Jan Beulich  <jbeulich@novell.com>
 164
 165         * config/tc-i386.c (build_modrm_byte): Also check for RegEip
 166         when considering IP-relative addressing.
 167
 168 2007-09-26  Jan Beulich  <jbeulich@novell.com>
 169
 170         * config/tc-i386.h (md_register_arithmetic): Define.
 171         * config/tc-ia64.h (md_register_arithmetic): Likewise.
 172         * doc/internals.texi: Document md_register_arithmetic.
 173         * expr.c (make_expr_symbol): Force O_register expressions into
 174         reg_section.
 175         (expr): Provide default for md_register_arithmetic. Don't resolve
 176         adding/subtracting constants to/from registers if
 177         md_register_arithmetic is zero.
 178
 179 2007-09-26  Jan Beulich  <jbeulich@novell.com>
 180
 181         * dw2gencfi.c: Conditionalize whole body upon TARGET_USE_CFIPOP.
 182         (cfi_finish): Add second empty instance.
 183
 184 2007-09-26  Jan Beulich  <jbeulich@novell.com>
 185
 186         * config/tc-ia64.c (dot_pred_rel): Replace specialized handling
 187         with simple call to parse_operand.
 188
 189 2007-09-26  Jan Beulich  <jbeulich@novell.com>
 190
 191         * config/tc-i386.c (NUM_FLAG_CODE): Remove.
 192
 193 2007-09-26  Jan Beulich  <jbeulich@novell.com>
 194
 195         * as.c (itbl_parse): Remove #define.
 196         (struct itbl_file_list): Move down and ...
 197         (itbl_files): .. conditionalize upon HAVE_ITBL_CPU.
 198         (show_usage): Conditionalize printing of --itbl option upon
 199         HAVE_ITBL_CPU.
 200         (parse_args): Conditionalize handling of -t/--itbl options upon
 201         HAVE_ITBL_CPU. Remove OPTION_INSTTBL and replace its use with
 202         't'.
 203
 204 2007-09-25  H.J. Lu  <hongjiu.lu@intel.com>
 205
 206         * config/tc-i386.c (output_insn): Use i.tm.opcode_length to
 207         check opcode length.
 208
 209 2007-09-25  Nathan Sidwell  <nathan@codesourcery.com>
 210
 211         * config/tc-m68k.c (LONG_BRANCH_VIA_COND): New.
 212         (BRANCHBWPL, FRAG_VAR_SIZE): New.
 213         (md_relax_table): Add BRANCHBWPL entries.
 214         (m68k_ip): Choose BRANCHBWPL relaxation if necessary.
 215         (md_assemble): Use FRAG_VAR_SIZE.
 216         (md_convert_frag_1): Add BRANCHBWPL cases.
 217         (md_estimate_size_before_relaz): Likewise.
 218
 219 2007-09-24  Carlos O'Donell  <carlos@codesourcery.com>
 220
 221         * config/tc-mips.c (s_align): Set max_alignment to 28.
 222
 223 2007-09-20  H.J. Lu  <hongjiu.lu@intel.com>
 224
 225         PR 658
 226         * config/tc-i386.c (SCALE1_WHEN_NO_INDEX): Removed.
 227         (set_allow_index_reg): New.
 228         (allow_index_reg): Likewise.
 229         (md_pseudo_table): Add "allow_index_reg" and
 230         "disallow_index_reg".
 231         (build_modrm_byte): Set i.sib.index to NO_INDEX_REGISTER for
 232         fake index registers.
 233         (i386_scale): Updated.
 234         (i386_index_check): Support fake index registers.
 235         (parse_real_register): Return NULL on eiz/riz if fake index
 236         registers aren't allowed.
 237
 238 2007-09-19  Nick Clifton  <nickc@redhat.com>
 239
 240         * config/tc-h8300.c (md_apply_fix): Do not abort or handle 8 byte
 241         fixups.
 242
 243 2007-09-19  Bob Wilson  <bob.wilson@acm.org>
 244
 245         * doc/c-xtensa.texi (Xtensa Immediate Relaxation): Fix "addi" typo.
 246
 247 2007-09-18  Bernd Schmidt  <bernd.schmidt@analog.com>
 248
 249         * config/bfin-parse.y (asm_1): Slightly improve error messages
 250         for "reg += const;".
 251
 252 2007-09-18  Alan Modra  <amodra@bigpond.net.au>
 253
 254         PR gas/5026
 255         * read.c (emit_expr): Only use long long if required and available.
 256
 257 2007-09-17  H.J. Lu  <hongjiu.lu@intel.com>
 258
 259         * config/tc-i386.c (baseindex): Removed.
 260         (build_modrm_byte): Check reg_num for RIP register instead of
 261         reg_type.
 262         (i386_index_check): Likewise.
 263
 264 2007-09-17  H.J. Lu  <hongjiu.lu@intel.com>
 265
 266         PR gas/5035
 267         * config/obj-coff.c (obj_coff_endef): Remove checking size of
 268         def_symbol_in_progress.
 269
 270 2007-09-17  Evandro Menezes  <evandro@yahoo.com>
 271
 272         PR gas/5026
 273         * read.c (emit_expr): Use unsigned long long values in warning
 274         message about truncated expressions.
 275
 276 2007-09-17  H.J. Lu  <hongjiu.lu@intel.com>
 277
 278         * config/tc-i386.c (intel_e04): Revert the last change.
 279
 280 2007-09-17  Nick Clifton  <nickc@redhat.com>
 281
 282         * po/es.po: Updated Spanish translation.
 283
 284 2007-09-15  H.J. Lu  <hongjiu.lu@intel.com>
 285
 286         PR gas/5034
 287         * config/tc-i386.c (intel_e04): Return 1 if cur_token.code is
 288         T_NIL.
 289
 290 2007-09-14  H.J. Lu  <hongjiu.lu@intel.com>
 291
 292         * config/tc-i386.c (build_modrm_byte): Adjust comment line
 293         wrap.
 294
 295 2007-09-14  H.J. Lu  <hongjiu.lu@intel.com>
 296
 297         * config/tc-i386.c (build_modrm_byte): Use (A || B) instead
 298         of (A || B) != 0.
 299
 300 2007-09-14  H.J. Lu  <hongjiu.lu@intel.com>
 301
 302         * config/tc-i386.c (build_modrm_byte): Adjust indentation.
 303
 304 2007-09-14  Michael Meissner  <michael.meissner@amd.com>
 305             Dwarakanath Rajagopal  <dwarak.rajagopal@amd.com>
 306             Tony Linthicum  <tony.linthicum@amd.com>
 307
 308         * NEWS: Add SSE5 support to NEWS file.
 309
 310         * config/tc-i386.h (drex_byte): Add fields to allow process_drex
 311         and build_modrm_byte to communicate.
 312         (DREX_OC0): New SSE5 macro.
 313         (DREX_OC0_MASK): Ditto.
 314         (DREX_OC1): Ditto.
 315         (DREX_OC1_MASK): Ditto.
 316         (DREX_XMEM_X1_X2_X2): Ditto.
 317         (DREX_X1_XMEM_X2_X2): Ditto.
 318         (DREX_X1_XMEM_X2_X1: Ditto.
 319         (DREX_X1_X2_XMEM_X1: Ditto.
 320         (DREX_XMEM_X1_X2): Ditto.
 321         (DREX_X1_XMEM_X2): Ditto.
 322         (drex_byte): New structure to describe the DREX byte.
 323
 324         * config/tc-i386.c (process_drex): New function to handle SSE5
 325         DREX bits.
 326         (build_modrm_byte): Use the information cached away in
 327         process_drex in the case of DREX instructions.
 328         (i386_insn): Add drex field.
 329         (pi): Add debugging of drex field.
 330         (md_assemble): Treat SSE5 like SSE3 in instructions with an
 331         immediate byte.  Move REX field to DREX if this is a DREX
 332         instruction.
 333         (process_operands): Add SSE5 support.
 334         (build_modrm_byte): Ditto.
 335         (output_insn): Ditto.
 336         (cpu_arch): Ditto.
 337         (i386_align_code): Ditto.
 338
 339 2007-09-12  Jan Beulich  <jbeulich@novell.com>
 340
 341         * config/tc-i386.c (md_assemble): Move handling of extrq/insertq
 342         after generic operand swapping, and swap only the immediate operands.
 343
 344 2007-09-11  Nathan Sidwell  <nathan@codesourcery.com>
 345
 346         * config/tc-m68k.c (m68k_ip): Add mcfisa_c case.
 347         (m68k_elf_final_processing): Add EF_M68K_CF_ISA_C_NODIV.
 348
 349 2007-09-09  H.J. Lu  <hongjiu.lu@intel.com>
 350
 351         * tc-i386.c (output_insn): Only check SSE4.2 and ABM for 3
 352         byte opcode.
 353
 354 2007-09-08  H.J. Lu  <hongjiu.lu@intel.com>
 355
 356         * config/tc-i386.c (cpu_flags_check_x64): Renamed to ...
 357         (cpu_flags_check_cpu64): This. Inline.
 358         (uints_all_zero): New.
 359         (uints_set): Likewise
 360         (uints_equal): Likewise
 361         (UINTS_ALL_ZERO): Likewise
 362         (UINTS_SET): Likewise
 363         (UINTS_CLEAR): Likewise
 364         (UINTS_EQUAL): Likewise
 365         (cpu_flags_and): Likewise.
 366         (cpu_flags_or): Likewise.
 367         (operand_type_and): Likewise.
 368         (operand_type_or): Likewise.
 369         (operand_type_xor): Likewise.
 370         (cpu_flags_not): Inline and use switch instead of loop.
 371         (cpu_flags_match): Updated.
 372         (operand_type_match): Likewise.
 373         (smallest_imm_type): Likewise.
 374         (set_cpu_arch): Likewise.
 375         (pt): Likewise.
 376         (md_assemble): Likewise.
 377         (parse_insn): Likewise.
 378         (optimize_imm): Likewise.
 379         (match_template): Likewise.
 380         (process_suffix): Likewise.
 381         (update_imm): Likewise.
 382         (finalize_imm): Likewise.
 383         (process_operands): Likewise.
 384         (build_modrm_byte): Likewise.
 385         (i386_immediate): Likewise.
 386         (i386_displacement): Likewise.
 387         (i386_index_check): Likewise.
 388         (i386_operand): Likewise.
 389         (i386_target_format): Likewise.
 390         (intel_e11): Likewise.
 391         (operand_type): Remove implicitregister.
 392         (operand_type_check): Updated. Inline.
 393         (cpu_flags_all_zero): Removed.
 394         (operand_type_all_zero): Likewise.
 395         (i386_array_biop): Likewise.
 396         (cpu_flags_biop): Likewise.
 397         (operand_type_biop): Likewise.
 398
 399 2007-09-08  H.J. Lu  <hongjiu.lu@intel.com>
 400
 401         * Makefile.am: Run "make dep-am".
 402         * Makefile.in: Regenerate.
 403
 404 2007-09-08  H.J. Lu  <hongjiu.lu@intel.com>
 405
 406         * configure.in (AC_CHECK_HEADERS): Add limits.h.
 407         * configure: Regenerated.
 408         * config.in: Likewise.
 409
 410         * config/tc-i386.c: Include "opcodes/i386-init.h".
 411         (_i386_insn): Use i386_operand_type for types.
 412         (cpu_arch_flags): Updated to new types with bitfield.
 413         (cpu_arch_tune_flags): Likewise.
 414         (cpu_arch_isa_flags): Likewise.
 415         (cpu_arch): Likewise.
 416         (i386_align_code): Likewise.
 417         (set_code_flag): Likewise.
 418         (set_16bit_gcc_code_flag): Likewise.
 419         (set_cpu_arch): Likewise.
 420         (md_assemble): Likewise.
 421         (parse_insn): Likewise.
 422         (process_operands): Likewise.
 423         (output_branch): Likewise.
 424         (output_jump): Likewise.
 425         (parse_real_register): Likewise.
 426         (mode_from_disp_size): Likewise.
 427         (smallest_imm_type): Likewise.
 428         (pi): Likewise.
 429         (type_names): Likewise.
 430         (pt): Likewise.
 431         (pte): Likewise.
 432         (swap_2_operands): Likewise.
 433         (optimize_imm): Likewise.
 434         (optimize_disp): Likewise.
 435         (match_template): Likewise.
 436         (check_string): Likewise.
 437         (process_suffix): Likewise.
 438         (check_byte_reg): Likewise.
 439         (check_long_reg): Likewise.
 440         (check_qword_reg): Likewise.
 441         (check_word_reg): Likewise.
 442         (finalize_imm): Likewise.
 443         (build_modrm_byte): Likewise.
 444         (output_insn): Likewise.
 445         (disp_size): Likewise.
 446         (imm_size): Likewise.
 447         (output_disp): Likewise.
 448         (output_imm): Likewise.
 449         (gotrel): Likewise.
 450         (i386_immediate): Likewise.
 451         (i386_displacement): Likewise.
 452         (i386_index_check): Likewise.
 453         (i386_operand): Likewise.
 454         (parse_real_register): Likewise.
 455         (i386_intel_operand): Likewise.
 456         (intel_e09): Likewise.
 457         (intel_bracket_expr): Likewise.
 458         (intel_e11): Likewise.
 459         (cpu_arch_flags_not): New.
 460         (cpu_flags_check_x64): Likewise.
 461         (cpu_flags_all_zero): Likewise.
 462         (cpu_flags_not): Likewise.
 463         (i386_cpu_flags_biop): Likewise.
 464         (cpu_flags_biop): Likewise.
 465         (cpu_flags_match); Likewise.
 466         (acc32): New.
 467         (acc64): Likewise.
 468         (control): Likewise.
 469         (reg16_inoutportreg): Likewise.
 470         (disp16): Likewise.
 471         (disp32): Likewise.
 472         (disp32s): Likewise.
 473         (disp16_32): Likewise.
 474         (anydisp): Likewise.
 475         (baseindex): Likewise.
 476         (regxmm): Likewise.
 477         (imm8): Likewise.
 478         (imm8s): Likewise.
 479         (imm16): Likewise.
 480         (imm32): Likewise.
 481         (imm32s): Likewise.
 482         (imm64): Likewise.
 483         (imm16_32): Likewise.
 484         (imm16_32s): Likewise.
 485         (imm16_32_32s): Likewise.
 486         (operand_type): Likewise.
 487         (operand_type_check): Likewise.
 488         (operand_type_match): Likewise.
 489         (operand_type_register_match): Likewise.
 490         (update_imm): Likewise.
 491         (set_code_flag): Also update cpu_arch_flags_not.
 492         (set_16bit_gcc_code_flag): Likewise.
 493         (md_begin): Likewise.
 494         (parse_insn): Use cpu_flags_check_x64 to check 64bit support.
 495         Use cpu_flags_match to match instructions.
 496         (i386_target_format): Update cpu_arch_isa_flags and
 497         cpu_arch_tune_flags to i386_cpu_flags type with bitfield.
 498         (smallest_imm_type): Check cpu_arch_tune to tune for i486.
 499         (match_template): Don't initialize overlap0, overlap1,
 500         overlap2, overlap3 and operand_types.
 501         (process_suffix): Handle crc32 with 64bit register.
 502         (MATCH): Removed.
 503         (CONSISTENT_REGISTER_MATCH): Likewise.
 504
 505         * config/tc-i386.h (arch_entry): Updated to i386_cpu_flags
 506         type.
 507
 508 2007-09-06  H.J. Lu  <hongjiu.lu@intel.com>
 509
 510         * config/tc-i386.c (match_template): Handle invlpga, vmload,
 511         vmrun and vmsave in SVME.
 512         (process_suffix): Likewise.
 513
 514 2007-09-05  H.J. Lu  <hongjiu.lu@intel.com>
 515
 516         * config/tc-i386.c (i386_index_check): Don't use RegRex
 517         on the reg_type field.
 518         (parse_real_register): Use `||' instead of `|'.
 519
 520 2007-09-04  H.J. Lu  <hongjiu.lu@intel.com>
 521
 522         * config/tc-i386.c (process_operands): Remove segment override
 523         check on SVME instructions.
 524         (i386_index_check): Remove memory operand check on SVME
 525         instructions.
 526
 527 2007-09-04  Alan Modra  <amodra@bigpond.net.au>
 528
 529         * config/tc-spu.c (struct spu_insn): Delete "flag".  Add "reloc".
 530         (md_assemble): Update init of insn.  Use insn.reloc instead of
 531         calculating from flag.
 532         (get_imm): Set reloc rather than flag.
 533         (calcop): Formatting.
 534
 535 2007-08-29  Daniel Jacobowitz  <dan@codesourcery.com>
 536
 537         * dwarf2dbg.c (dwarf2_directive_loc): Emit duplicate .loc directives.
 538
 539 2007-08-28  Daniel Jacobowitz  <dan@codesourcery.com>
 540
 541         * doc/c-arc.texi: Fix typo.
 542
 543 2007-08-28  H.J. Lu  <hongjiu.lu@intel.com>
 544
 545         * config/tc-i386.c (process_suffix): Handle cmpxchg8b in
 546         Intel mode.
 547
 548 2007-08-28  Nathan Sidwell  <nathan@codesourcery.com>
 549
 550         * config/tc-m68k.c (mcf52235_ctrl): Add cache registers.
 551         (mcf5253_ctrl): Add RAMBAR, MBAR, MBAR2.
 552         (mcf5407_ctrl): New.
 553         (m68k_cpus): Adjust 5407 entry.
 554
 555 2007-08-28  Maxim Kuvyrkov  <maxim@codesourcery.com>
 556
 557         * config/tc-m68k.c (mcf51qe_ctrl): Define 51QE control registers.
 558         (m68k_cpus): Define 51QE cpu.
 559
 560 2007-08-28  Mark Shinwell  <shinwell@codesourcery.com>
 561             Joseph Myers  <joseph@codesourcery.com>
 562
 563         * as.c (main): Flush stderr before printing listings to ensure
 564         consistent output order across platforms.
 565
 566 2007-08-28  Robert Sebastian Gerus  <arachnist@gmail.com>
 567
 568         * configure.tgt: Add support for i[3-7]86-*-dragonfly*.
 569
 570 2007-08-24  Joseph Myers  <joseph@codesourcery.com>
 571             Paul Brook  <paul@codesourcery.com>
 572
 573         * remap.c: New.
 574         * as.h (remap_debug_filename, add_debug_prefix_map): Declare.
 575         * as.c (show_usage): Document --debug-prefix-map option.
 576         (parse_args): Handle --debug-prefix-map.
 577         * dwarf2dbg.c (out_file_list, out_debug_info): Remap debug paths.
 578         * stabs.c (stabs_generate_asm_file): Remap debug paths.
 579         * Makefile.am (GAS_CFILES): Add remap.c
 580         (GENERIC_OBJS): Add remap.o.
 581         Regenerate dependencies.
 582         * Makefile.in: Regenerate.
 583         * doc/as.texinfo (--debug-prefix-map): Document.
 584
 585 2007-08-24  Aurelien Jarno  <aurel32@debian.org>
 586
 587         * config/tc-arm.c (md_apply_fix): Cast bfd_vma values to long
 588         before printing them.
 589
 590 2007-08-24  Anders Waldenborg  <anders@0x63.nu>
 591             Alan Modra  <amodra@bigpond.net.au>
 592
 593         * config/tc-i386.c (lex_got): Don't scan past a comma.
 594
 595 2007-08-23  Ben Elliston  <bje@au.ibm.com>
 596
 597         * config/tc-ppc.c (parse_cpu): Handle "750cl".
 598         (pre_defined_registers): Add "gqr0" to "gqr7", "gqr.0" to "gqr.7".
 599         (md_show_usage): Document -m750cl.
 600         (md_assemble): Handle two delimiters in succession (eg. `),').
 601         * doc/c-ppc.texi (PowerPC-Opts): Document -m750cl.
 602         * testsuite/gas/ppc/ppc.exp: Run ppc70ps dump tests.
 603         * testsuite/gas/ppc/ppc750ps.s: New file.
 604         * testsuite/gas/ppc/ppc750ps.d: Likewise.
 605
 606 2007-08-23  Ben Elliston  <bje@au.ibm.com>
 607
 608         * doc/c-arm.texi (ARM Directives): Move brackets out of @vars.
 609
 610 2007-08-17  Alan Modra  <amodra@bigpond.net.au>
 611
 612         PR gas/4079
 613         * config/tc-i386.c (x86_cons): Complain about invalid @got etc.
 614         expressions.
 615         (i386_immediate): Detect and complain about more cases of
 616         invalid immediate expressions.  Return failure rather than
 617         converting them to zero.
 618         (i386_displacement): Likewise.
 619
 620 2007-08-17  Alan Modra  <amodra@bigpond.net.au>
 621
 622         * po/Make-in: Add --msgid-bugs-address to xgettext invocation.
 623
 624 2007-08-14  Andreas Schwab  <schwab@suse.de>
 625
 626         * config/tc-ia64.c (tc_gen_reloc): Return NULL if relocation is
 627         unrepresentable.
 628
 629 2007-08-12  Matthias Klose  <doko@ubuntu.com>
 630
 631         * doc/Makefile.am (AM_MAKEINFOFLAGS, TEXI2DVI): Include
 632         $(top_srcdir)/../../bfd/doc.
 633         * doc/Makefile.in: Regenerate.
 634
 635 2007-08-10  Nick Clifton  <nickc@redhat.com>
 636
 637         * NEWS: Add a marker for the 2.18 features.
 638
 639 2007-08-09  Paul Brook  <paul@codesourcery.com>
 640
 641         * config/tc-arm.c (relaxed_symbol_addr): Compensate for alignment.
 642
 643 2007-08-09  H.J. Lu  <hongjiu.lu@intel.com>
 644
 645         * config/tc-i386.c (check_byte_reg): Support pextrb and pinsrb.
 646
 647 2007-07-29  H.J. Lu  <hongjiu.lu@intel.com>
 648
 649         * config/tc-i386.c (check_long_reg): Allow cvtss2si to convert
 650         DWORD memory to Reg64 in Intel synax.
 651         (check_qword_reg): Allow cvtsd2si to convert QWORD memory to
 652         Reg32 in Intel syntax.
 653
 654 2007-07-25  Sterling Augustine  <sterling@tensilica.com>
 655
 656         * config/tc-xtensa.c (xtensa_extui_opcode): New.
 657         (xg_expand_assembly_insn): Check for invalid extui operands.
 658         (md_begin): Initialize xtensa_extui_opcode.
 659
 660 2007-07-24  Nick Clifton  <nickc@redhat.com>
 661
 662         * config/tc-mep.h (skip_whitespace): Remove definition.
 663
 664 2007-07-23  H.J. Lu  <hongjiu.lu@intel.com>
 665
 666         * config/tc-i386.c (cpu_arch): Change i386 to PROCESSOR_I386.
 667         (f32_15): Removed.
 668         (jump_31): New.
 669         (f32_patt): Remove f32_15.
 670         (f16_patt): Likewise.
 671         (i386_align_code): Updated to alt_long_patt for 64bit by
 672         default.
 673
 674         * config/tc-i386.h (processor_type): Add PROCESSOR_I386.
 675
 676 2007-07-23  Evandro Menezes  <evandro.menezes@amd.com>
 677
 678         * config/tc-i386.c (i386_align_code): Enable alignment up to
 679         MAX_MEM_FOR_RS_ALIGN_CODE bytes.  Remove special treatment
 680         for K8.
 681
 682         * config/tc-i386.h (MAX_MEM_FOR_RS_ALIGN_CODE): Changed to 31.
 683
 684 2007-07-20  Nick Clifton  <nickc@redhat.com>
 685
 686         * app.c (do_scrub_chars): Provide a one character buffer to hold a
 687         pushed back newline at the end of an unterminated quoted string.
 688
 689 2007-07-14  Nick Clifton  <nickc@redhat.com>
 690
 691         * config/tc-arm.c (create_register_alias): Return a boolean rather
 692         than an integer.
 693         Check the return value of insert_reg_alias and do not continue to
 694         create aliases once an insertion has failed.
 695         (s_unreq): Delete the all-upper-case and all-lower-case
 696         alternatives as well.
 697
 698 2007-07-12  Kai Tietz   <kai.tietz@onevision.com>
 699
 700         * symbols.c: Print bfd_hostptr_t to file via fprintf_vma.
 701         * write.c: Likewise.
 702
 703 2007-07-11  Daniel Jacobowitz  <dan@codesourcery.com>
 704
 705         * config/tc-mips.c (mips_dwarf2_format, mips_dwarf2_addr_size): Use
 706         HAVE_64BIT_SYMBOLS.
 707
 708 2007-07-04  Richard Sandiford  <richard@codesourcery.com>
 709
 710         * config/tc-mips.c (mips_cpu_info_table): Add new entries for
 711         {24k,24ke,34k,74k}f{2_1,1_1,x}.  Also add an entry for 74kf3_2.
 712         Deprecate *x and *fx.
 713         * doc/c-mips.texi: Document the new CPU arguments.  Deprecate
 714         *x and *fx.
 715
 716 2007-07-04  H.J. Lu  <hongjiu.lu@intel.com>
 717
 718         * config/obj-coff.h (x86_64_target_format): Renamed to ...
 719         (i386_target_format): This
 720         (TARGET_FORMAT): Use i386_target_format.
 721
 722         * config/tc-i386.c (x86_64_target_format): Removed.
 723         (i386_target_format): Handle PE formats.
 724
 725 2007-07-04  Nick Clifton  <nickc@redhat.com>
 726
 727         * symbols.c (symbol_relc_make_value): Use bfd_sprintf_vma in order
 728         to get the right length of printed value.
 729
 730 2007-07-03  Nick Clifton  <nickc@redhat.com>
 731
 732         * COPYING: Replace with GPLv3 text.
 733         * app.c: Update copyright notice to refer to GPLv3.
 734         * as.c, as.h, asintl.h, atof_generic.c, bignum.h, bit_fix.h,
 735         cgen.c, cond.c, debug.c, depend.c, dw2gencfi.c, dw2gencfi.h,
 736         dwarf2dbg.c, dwarf2dbg.h, ecoff.c, ecoff.h, ehopt.c, emul.h,
 737         emul_target.h, expr.c, expr.h, flonum-copy.c, flonum.h,
 738         flonum-konst.c, frags.c, frags.h, hash.c, hash.h, input-file.c,
 739         input-file.h, input-scrub.c, ibtl-lex.h, itbl-lex.l, itbl-ops.c,
 740         itbl-ops.h, itbl-parse.y, listing.c, listing.h, literal.c,
 741         macro.c, messages.c, obj.h, output-file.c, output-file.h, read.c,
 742         read.h, sb.c, sb,h, stabs.c, struc-symbol.h, subsegs.c, subsegs.h,
 743         symbols.c, symbols.h, tc.h, write.c, write.h, config/aout_gnu.h,
 744         config/config/atof-ieee.c, config/atof-vax.c, config/bfin-aux.h,
 745         config/bfin-defs.h, config/bfin-lex.l, config/bfin-parse.y,
 746         config/itbl-mips.h, config/m68k-parse.h, config/m68k-parse.y,
 747         config/obj-aout.c, config/obj-aout.h, config/obj-coff.c,
 748         config/obj-coff.h, config/obj-ecoff.c, config/obj-ecoff.h,
 749         config/obj-elf.c, config/obj-elf.h, config/obj-evax.c,
 750         config/obj-evax.h, config/obj-multi.h, config/obj-som.c,
 751         config/obj-som.h, config/tc-alpha.c, config/tc-alpha.h,
 752         config/tc-arc.c, config/tc-arc.h, config/tc-arm.c,
 753         config/tc-arm.h, config/tc-avr.c, config/tc-avr.h,
 754         config/tc-bfin.c, config/tc-bfin.h, config/tc-cr16.c,
 755         config/tc-cr16.h, config/tc-cris.c, config/tc-cris.h,
 756         config/tc-crx.c, config/tc-crx.h, config/tc-d10v.c,
 757         config/tc-d10v.h, config/tc-d30v.c, config/tc-d30v.h,
 758         config/tc-dlx.c, config/tc-dlx.h, config/tc-fr30.c,
 759         config/tc-fr30.h, config/tc-frv.c, config/tc-frv.h,
 760         config/tc-generic.c, config/tc-generic.h, config/tc-h8300.c,
 761         config/tc-h8300.h, config/tc-hppa.c, config/tc-hppa.h,
 762         config/tc-i370.c, config/tc-i370.h, config/tc-i386.c,
 763         config/tc-i386.h, config/tc-i860.c, config/tc-i860.h,
 764         config/tc-i960.c, config/tc-i960.h, config/tc-ia64.c,
 765         config/tc-ia64.h, config/tc-ip2k.c, config/tc-ip2k.h,
 766         config/tc-iq2000.c, config/tc-iq2000.h, config/tc-m32c.c,
 767         config/tc-m32c.h, config/tc-m32r.c, config/tc-m32r.h,
 768         config/tc-m68hc11.c, config/tc-m68hc11.h, config/tc-m68k.c,
 769         config/tc-m68k.h, config/tc-maxq.c, config/tc-maxq.h,
 770         config/tc-mcore.c, config/tc-mcore.h, config/tc-mep.c,
 771         config/tc-mep.h, config/tc-mips.c, config/tc-mips.h,
 772         config/tc-mmix.c, config/tc-mmix.h, config/tc-mn10200.c,
 773         config/tc-mn10200.h, config/tc-mn10300.c, config/tc-mn10300.h,
 774         config/tc-msp430.c, config/tc-msp430.h, config/tc-mt.c,
 775         config/tc-mt.h, config/tc-ns32k.c, config/tc-ms32k.h,
 776         config/tc-openrisc.c, config/tc-openrisc.h, config/tc-or32.c,
 777         config/tc-or32.h, config/tc-pdp11.c, config/tc-pdp11.h,
 778         config/tc-pj.c, config/tc-pj.h, config/tc-ppc.c, config/tc-ppc.h,
 779         config/tc-s390.c, config/tc-s390.h, config/tc-score.c,
 780         config/tc-score.h, config/tc-sh64.c, config/tc-sh64.h,
 781         config/tc-sh.c, config/tc-sh.h, config/tc-sparc.c,
 782         config/tc-sparc.h, config/tc-spu.c, config/tc-spu.h,
 783         config/tc-tic30.c, config/tc-tic30.h, config/tc-tic4x.c,
 784         config/tc-tic4x.h, config/tc-tic54x.c, config/tc-tic54x.h,
 785         config/tc-v850.c, config/tc-v850.h, config/tc-vax.c,
 786         config/tc-vax.h, config/tc-xc16x.c, config/tc-x16x.h,
 787         config/tc-xstormy16.c, config/tc-xstormy16.h, config/tc-xtensa.c,
 788         config/tc-xtensa.h, config/tc-z80.c, config/tc-z80.h,
 789         config/tc-z8k.c, config/tc-z8k.h, config/te-386bsd.h,
 790         config/te-freebsd.h, config/te-hppa.h, config/te-irix.h,
 791         config/te-netware.h, config/te-sparcaout.h,  config/te-tmips.h,
 792         config/te-vxworks.h, config/vax-inst.h, config/xtensa-istack.h,
 793         config/xtensa-relax.c, config/xtensa-relax.h: Likewise.
 794
 795         * flonum-mult.c: Likewise, and also correct typo referring to
 796         non-existant GNU Assembler General Public License.
 797         * config/tc-m68851.h: Likewise.
 798         * NEWS: Mention the new license.  Also note where the 2.17 release
 799         happened.
 800         * config/e-crisaout.c: Add copyright header.
 801         * config/e-criself.c, config/e-i386aout.c, config/e-i386coff.c,
 802         config/e-i386elf.c, config/e-mipscoff.c, config/e-mipself.c,
 803         config/obj-multi.c, config/te-aix5.h, config/te-armeabi.h,
 804         config/te-armlinuxeabi.h, config/te-dynix.h, config/te-epoc-pe.h,
 805         config/te-generic.h, config/te-gnu.h, config/te-go32.h,
 806         config/te-hppa64.h, config/te-hppalinux64.h, config/te-hpux.h,
 807         config/te-i386aix.h, config/te-ia64aix.h, config/te-interix.h,
 808         config/te-linux.h, config/te-lnews.h, config/te-lynx.h,
 809         config/te-mach.h, config/te-macos.h, config/te-nbsd532.h,
 810         config/te-nbsd.h, config/te-pc532mach.h, config/te-pe.h,
 811         config/te-pep.h, config/te-psos.h, config/te-riscix.h,
 812         config/te-sun3.h, config/te-svr4.h, config/te-symbian.h,
 813         config/te-wince-pe.h: Likewise.
 814
 815 2007-07-03  Nathan Sidwell  <nathan@codesourcery.com>
 816
 817         * config/tc-m68k.c (m68k_ip): Add j & K operand types.
 818         (install_operand): Add E encoding.
 819         (md_begin): Check and skip initial '.' arg character.
 820         (get_num): Add 0..511 case.
 821
 822 2007-07-03  Alan Modra  <amodra@bigpond.net.au>
 823
 824         PR 4713
 825         * config/obj-elf.c (elf_ecoff_set_ext): Make static when OBJ_MAYBE_ELF.
 826         * config/obj-elf.h (obj_ecoff_set_ext): Comment.
 827
 828 2007-07-03  Mikkel Lauritsen  <renard@nospam.dk>
 829
 830         PR 4722
 831         * app.c (do_scrub_chars <state 5>): Check for output buffer full
 832         after memcpy.
 833
 834 2007-07-02  Joseph Myers  <joseph@codesourcery.com>
 835
 836         * config/tc-mips.c (s_dtprelword, s_dtpreldword,
 837         s_dtprel_internal): New.
 838         (mips_pseudo_table): Add .dtprelword and .dtpreldword.
 839         (md_apply_fix): Handle BFD_RELOC_MIPS_TLS_DTPREL32 and
 840         BFD_RELOC_MIPS_TLS_DTPREL64.
 841
 842 2007-07-02  Alan Modra  <amodra@bigpond.net.au>
 843
 844         * Makefile.am: Run "make dep-am".
 845         * Makefile.in: Regenerate.
 846         * aclocal.m4: Regenerate.
 847         * config.in: Regenerate.
 848         * doc/Makefile.in: Regenerate.
 849         * po/POTFILES.in: Regenerate.
 850         * po/gas.pot: Regenerate.
 851
 852 2007-07-02  Alan Modra  <amodra@bigpond.net.au>
 853
 854         * config/tc-ppc.c (ppc_pe_section): Comment out code assigning
 855         coff section flag values to bfd section flag.
 856
 857 2007-06-30  H.J. Lu  <hongjiu.lu@intel.com>
 858
 859         * aclocal.m4: Regenerated.
 860         * doc/Makefile.in: Likewise.
 861         * Makefile.in: Likewise.
 862
 863 2007-06-29  Joseph Myers  <joseph@codesourcery.com>
 864
 865         * as.c (main): Only call create_obj_attrs_section if IS_ELF.
 866
 867 2007-06-29  Joseph Myers  <joseph@codesourcery.com>
 868
 869         * as.c (create_obj_attrs_section): New.
 870         (main): Call create_obj_attrs_section for ELF.
 871         * read.c (s_gnu_attribute, skip_whitespace, skip_past_char,
 872         skip_past_comma, s_vendor_attribute): New.
 873         (potable): Add gnu_attribute for ELF.
 874         * read.h (s_vendor_attribute): Declare.
 875         * config/tc-arm.c (s_arm_eabi_attribute): Replace by wrapper
 876         round s_vendor_attribute.
 877         (aeabi_set_public_attributes): Update for new attributes
 878         interfaces.
 879         (arm_md_end): Remove attributes contents setting now done
 880         generically.
 881
 882 2007-06-29  M R Swami Reddy  <MR.Swami.Redd@nsc.com>
 883
 884         * Makefile.am: Add CR16 related entry.
 885         * Makefile.in: Regenerate.
 886         * config/tc-cr16.h: New file
 887         * config/tc-cr16.c: New file
 888         * doc/c-cr16.texi: New file for cr16
 889         * doc/all.texi: Entry for cr16
 890         * doc/Makefile.am: Added c-cr16.texi
 891         * doc/Makefile.in: Regenerate
 892         * doc/as.texinfo: Entry for CR16 target
 893         * NEWS: Announce the support for the new target.
 894
 895 2007-06-26  Paul Brook  <paul@codesourcery.com>
 896
 897         * config/tc-arm.c (parse_operands): Accept generic coprocessor regs
 898         for OP_RVC.
 899         (reg_names): Add fpinst, pfinst2, mvfr0 and mvfr1.
 900
 901 2007-06-25  H.J. Lu  <hongjiu.lu@intel.com>
 902
 903         * config/tc-i386.c (process_operands): Replace regKludge
 904         with RegKludge.
 905
 906 2007-06-25  Richard Sandiford  <richard@codesourcery.com>
 907
 908         * config/tc-mips.h (TC_SYMFIELD_TYPE): New.
 909         * config/tc-mips.c (append_insn): Record which symbols have
 910         R_MIPS16_26 relocations against them.
 911         (mips_fix_adjustable): Don't reduce relocations against such symbols.
 912
 913 2007-06-22  Sterling Augustine  <sterling@tensilica.com>
 914
 915         * config/tc-xtensa.c (xg_assembly_relax): Comment termination rules.
 916         (frag_format_size): Handle RELAX_IMMED_STEP3.
 917         (xtensa_relax_frag, md_convert_frag): Likewise.
 918         * config/tc-xtensa.h (xtensa_relax_statesE): Add RELAX_IMMED_STEP3.
 919         (RELAX_IMMED_MAXSTEPS): Adjust.
 920         * config/xtensa-relax.c (widen_spec_list): Add transitions from
 921         wide branches to branch-over-jumps.
 922         (build_transition): Handle wide branches in transition patterns.
 923
 924 2007-06-22  H.J. Lu  <hongjiu.lu@intel.com>
 925
 926         * config/tc-i386.c (disp_size): New.
 927         (imm_size): Likewise.
 928         (output_disp): Use disp_size and imm_size.
 929         (output_imm): Use imm_size.
 930
 931 2007-06-19  Sterling Augustine  <sterling@tensilica.com>
 932
 933         * config/tc-xtensa.h (struct xtensa_frag_type): Update comment about
 934         use of literal_frag field.
 935         * config/tc-xtensa.c (xtensa_mark_literal_pool_location): Record frag
 936         in the literal_frag field.
 937         (xtensa_move_literals): Use it here instead of searching.  Update
 938         literal_frag field with new value.
 939
 940 2007-06-14  Paul Brook  <paul@codesourcery.com>
 941
 942         * config/tc-arm.c (do_t_mov_cmp): Handle shift by register and
 943         narrow shift by immediate.
 944
 945 2007-06-14  H.J. Lu  <hongjiu.lu@intel.com>
 946
 947         * Makefile.am (ACLOCAL_AMFLAGS): Add -I ../config -I ../bfd.
 948
 949         * acinclude.m4: Don't include m4 files.
 950         (BFD_BINARY_FOPEN): Removed.
 951         Remove libtool kludge.
 952
 953         * Makefile.in: Regenerated.
 954         * doc/Makefile.in: Likewise.
 955         * aclocal.m4: Likewise.
 956         * configure: Likewise.
 957
 958 2007-06-11  Sterling Augustine  <sterling@tensilica.com>
 959             Bob Wilson  <bob.wilson@acm.org>
 960
 961         * config/tc-xtensa.c (XTENSA_PROP_INSN_NO_TRANSFORM): Renamed to...
 962         (XTENSA_PROP_NO_TRANSFORM): ...this.
 963         (frag_flags_struct): Move is_no_transform out of the insn sub-struct.
 964         (xtensa_mark_frags_for_org): New.
 965         (xtensa_handle_align): Set RELAX_ORG frag subtype for rs_org.
 966         (xtensa_post_relax_hook): Call xtensa_mark_frags_for_org.
 967         (get_frag_property_flags): Adjust reference to is_no_transform flag.
 968         (xtensa_frag_flags_combinable): Likewise.
 969         (frag_flags_to_number): Likewise.  Use XTENSA_PROP_NO_TRANSFORM.
 970         * config/tc-xtensa.h (xtensa_relax_statesE): Add RELAX_ORG.
 971
 972 2007-06-06  Paul Brook  <paul@codesourcery.com>
 973
 974         * config/tc-arm.c (s_align): Pad code sections appropriately.
 975
 976 2007-06-05  Paul Brook  <paul@codesourcery.com>
 977
 978         * config/tc-arm.c (insns): Correct Thumb-2 ldrd/strd opcodes.
 979
 980 2007-06-05  Nick Clifton  <nickc@redhat.com>
 981
 982         PR gas/4587
 983         * config/tc-sparc.c (sparc_ip): Terminate tls_ops array.
 984
 985 2007-06-05  Alan Modra  <amodra@bigpond.net.au>
 986
 987         * config/tc-spu.c (spu_cons): Use deferred_expression.  Handle
 988         number@ppu.
 989         (tc_gen_reloc): Abort if neither addsy or subsy is set.
 990         (md_apply_fix): Don't attempt to resolve SPU_PPU relocs.
 991         * config/tc-spu.h (md_operand): Handle @ppu without sym.
 992
 993 2007-05-31  Paul Brook  <paul@codesourcery.com>
 994
 995         * config/tc-arm.c (insns): Allow strex on M profile cores.
 996
 997 2007-05-29  David S. Miller  <davem@davemloft.net>
 998             Jakub Jelinek  <jakub@redhat.com>
 999
1000         PR gas/4558
1001         * config/tc-sparc.c (md_apply_fix): Fix relocation overflow checks
1002         for BFD_RELOC_SPARC_WDISP16 and BFD_RELOC_SPARC_WDISP19.
1003
1004 2007-05-29  Alan Modra  <amodra@bigpond.net.au>
1005
1006         * config/tc-spu.h: Wrap in #ifndef/#endif.  Delete coff macros.
1007
1008 2007-05-29  Alan Modra  <amodra@bigpond.net.au>
1009
1010         * config/tc-ppc.c: Convert to ISO C.
1011         * config/tc-ppc.c: Likewise.
1012
1013 2007-05-29  Alan Modra  <amodra@bigpond.net.au>
1014
1015         * write.h (EXEC_MACHINE_TYPE): Delete.
1016         (string_byte_count, section_alignment): Delete.
1017
1018 2007-05-28  Nathan Sidwell  <nathan@codesourcery.com>
1019
1020         * app.c (do_scrub_chars): Cope with \ at end of buffer.
1021
1022 2007-05-26  Alan Modra  <amodra@bigpond.net.au>
1023
1024         * config/tc-ppc.c (ppc_insert_operand): Truncate sign bits in
1025         top 32 bits of 64 bit value if so doing results in passing
1026         range check.  Rewrite sign extension fudges similarly.  Enable
1027         fudges for powerpc64 too.  Report user value if range check
1028         fails rather than fudged value.  Negate PPC_OPERAND_NEGATIVE
1029         range rather than value, also to report user value on failure.
1030
1031 2007-03-25  Paul Brook  <paul@codesourcery.com>
1032
1033         * config/tc-arm.c (T2_SUBS_PC_LR): Define.
1034         (do_t_add_sub): Correctly encode subs pc, lr, #const.
1035         (do_t_mov_cmp): Correctly encode movs pc, lr.
1036
1037 2007-05-24  Steve Ellcey  <sje@cup.hp.com>
1038
1039         * Makefile.in: Regnerate.
1040         * configure: Regenerate.
1041         * aclocal.m4: Regenerate.
1042         * doc/Makefile.in: Regenerate.
1043
1044 2007-05-22  Bob Wilson  <bob.wilson@acm.org>
1045
1046         * doc/c-xtensa.texi (Xtensa Automatic Alignment): Remove statements
1047         and index entries about automatic alignment of ENTRY instructions.
1048
1049 2007-05-22  Nick Clifton  <nickc@redhat.com>
1050
1051         * doc/as.texinfo: Use @copying around the copyright notice.
1052
1053 2007-05-18  Joseph Myers  <joseph@codesourcery.com>
1054
1055         * config/tc-mips.c (s_mipsset): Use generic s_set for directives
1056         containing a comma.
1057
1058 2007-05-17  H.J. Lu  <hongjiu.lu@intel.com>
1059
1060         PR gas/4517
1061         2003-06-05  Michal Ludvig  <mludvig@suse.cz>
1062         * doc/as.texinfo: Document new directives: .cfi_restore,
1063         .cfi_undefined, .cfi_same_value, .cfi_return_column,
1064         .cfi_remember_state and .cfi_restore_state.
1065
1066 2007-05-17  Nathan Sidwell  <nathan@codesourcery.com>
1067
1068         * config/tc-m68k.c (md_apply_fix): Show value of out of range
1069         fixups in error message.
1070         (md_conver_frag_1): Propagate the fix source location and use
1071         as_bad_where rather than fatal, for better error messages.
1072
1073 2007-05-16  Paul Brook  <paul@codesourcery.com>
1074
1075         * config/tc-arm.c (v7m_psrs): Add uppercase PSR names and xpsr.
1076
1077 2007-05-15  Mark Shinwell  <shinwell@codesourcery.com>
1078
1079         * app.c (do_scrub_chars): Don't damage \@ pseudo-variables.
1080
1081 2007-05-15  Vincent Riviere  <vincent.riviere@freesbee.fr>
1082
1083         PR gas/3041
1084         * config/tc-m68k.c (relaxable_symbol): Make sure that the correct
1085         addend is stored for relocs against weak symbols.
1086         (md_apply_fix): So not loose track of addend for relocs against
1087         weak symbols.
1088
1089 2007-05-14  Thiemo Seufer  <ths@mips.com>
1090
1091         * config/tc-mips.c (md_parse_option): Fix parsing of -O option.
1092
1093 2007-05-14  Mei Ligang  <ligang@sunnorth.com.cn>
1094
1095         * config/tc-score.c (data_op2, validate_immediate): Fix bug for
1096         addri, addri.c, subi, and subi.c when immediate number is hex.
1097         (score_insns): Remove subis and subis.c.
1098         (do_sub_rdi16): Delete.
1099
1100 2007-05-11  Alan Modra  <amodra@bigpond.net.au>
1101
1102         * config/tc-spu.c (md_pseudo_table): Add int, long, quad.  Call
1103         spu_cons for word.
1104         (md_assemble): Tidy use of insn.flag.
1105         (get_imm): Likewise.  Handle uppercase input too.
1106         (spu_cons): New function.
1107         * config/tc-spu.h (tc_fix_adjustable): Don't adjust SPU_PPU relocs.
1108         (TC_FORCE_RELOCATION): Don't resolve them either.
1109
1110 2007-05-05  Mark Shinwell  <shinwell@codesourcery.com>
1111
1112         * config/tc-arm.c (md_apply_fix): Generate more accurate
1113         diagnostic when 8-bit immediate range is exceeded for
1114         BFD_RELOC_ARM_OFFSET_IMM8.
1115
1116 2007-05-04  Alan Modra  <amodra@bigpond.net.au>
1117
1118         PR gas/4460
1119         * config/tc-i386.c (lex_got): Don't replace the reloc token with
1120         a space if we already have a space.
1121
1122 2007-05-03  H.J. Lu  <hongjiu.lu@intel.com>
1123
1124         * config/tc-i386.c (match_template): Don't explicitly check
1125         suffix for crc32 in Intel mode.
1126         (process_suffix): Issue an error for crc32 if the operand size
1127         is ambiguous.
1128
1129 2007-05-03  Vincent Riviere  <vincent.riviere@freesbee.fr>
1130             Nick Clifton  <nickc@redhat.com>
1131
1132         PR gas/3041
1133         * config/tc-m68k.c (relaxable_symbol): Do not relax weak symbols.
1134         (tc_gen_reloc): Adjust the addend of relocs against weak symbols.
1135         (md_apply_fix): Put zero values into the frags referencing weak
1136         symbols.
1137
1138 2007-05-02  Alan Modra  <amodra@bigpond.net.au>
1139
1140         PR 4448
1141         * config/tc-ppc.c (ppc_insert_operand): Don't increase min for
1142         PPC_OPERAND_PLUS1.
1143
1144 2007-05-01  H.J. Lu  <hongjiu.lu@intel.com>
1145
1146         * config/tc-i386.c (match_template): Check suffix for crc32 in
1147         Intel mdoe.
1148         (process_suffix): Default the suffix of 8bit crc32 to
1149         BYTE_MNEM_SUFFIX.
1150         (check_byte_reg): Skip check for 8bit crc32.
1151
1152 2007-04-30  H.J. Lu  <hongjiu.lu@intel.com>
1153
1154         * config/tc-i386.c (md_assemble): Use register_prefix in
1155         error/warning message.
1156         (check_byte_reg): Likewise.
1157         (check_long_reg): Likewise.
1158         (check_qword_reg): Likewise.
1159         (check_word_reg): Likewise.
1160         (process_operands): Likewise.
1161
1162 2007-04-30  Alan Modra  <amodra@bigpond.net.au>
1163
1164         PR 4436
1165         * config/tc-ppc.c (ppc_insert_operand): Disable range check if
1166         min > max.
1167
1168 2007-04-28  Thiemo Seufer  <ths@networkno.de>
1169
1170         * config/tc-mips.c: Fix comment.
1171
1172 2007-04-26  Anatoly Sokolov <aesok@post.ru>
1173
1174         * config/tc-avr.c (mcu_types): Add support for atmega8hva and
1175         atmega16hva devices. Move at90usb82 device to 'avr5' architecture.
1176         * doc/c-avr.texi: Document new devices.
1177
1178 2007-04-24  Alan Modra  <amodra@bigpond.net.au>
1179
1180         * Makefile.am: Run "make dep-am".
1181         * Makefile.in: Regenerate.
1182
1183 2007-04-23  Nathan Sidwell  <nathan@codesourcery.com>
1184
1185         * config/tc-m68k.c (mcf54455_ctrl): New.
1186         (HAVE_LONG_DISP, HAVE_LONG_CALL, HAVE_LONG_COND): New.
1187         (m68k_archs): Add isac.
1188         (m68k_cpus): Add 54455 family.
1189         (m68k_ip): Split Bg into Bb, Bs, Bg.
1190         (m68k_elf_final_processing): Add ISA_C.
1191         * doc/c-m68k.texi (M680x0 Options): Add isac.
1192
1193 2007-04-22  Alan Modra  <amodra@bigpond.net.au>
1194
1195         * read.c (read_a_source_file): Skip multiple spaces to
1196         cover hack in mmix md_start_line_hook which overwrites a
1197         colon with a space.  Delete sermon and needless assertion.
1198
1199 2007-04-21  Alan Modra  <amodra@bigpond.net.au>
1200
1201         * config/atof-vax.c (atof_vax_sizeof): Change return type to unsigned.
1202         (md_atof): Make number_of_chars unsigned.  Revert last change.
1203         * config/tc-or32.c (md_apply_fix): Delete bogus assertions.
1204         * config/tc-sh.c (sh_optimize_expr): Only define for OBJ_ELF.
1205         * config/tc-sh.h (md_optimize_expr): Likewise.
1206         * config/tc-sh64.c (shmedia_md_pcrel_from_section): Delete bogus
1207         assertion.
1208         * config/tc-xtensa.c (convert_frag_immed_finish_loop): Likewise.
1209
1210 2007-04-21  Nick Clifton  <nickc@redhat.com>
1211
1212         * config/atof-vax.c (md_atof): Fix comparison inside know().
1213
1214         * config/tc-ia64.c (emit_one_bundle): Fix typo.
1215
1216 2007-04-21  Alan Modra  <amodra@bigpond.net.au>
1217
1218         * expr.c (expr): Assert on rankarg, not rank which can be unsigned.
1219         * read.c (read_a_source_file): Remove buffer_limit[-1] assertion.
1220         Don't skip over NUL char.
1221         (pseudo_set): Set X_op for registers to O_register.
1222         * symbols.c (symbol_clone): Remove assertion that sym is defined.
1223         (resolve_symbol_value): Resolve O_register symbols.
1224         * config/tc-i386.c (parse_real_register): Don't use i386_float_regtab.
1225         Instead find st(0) by hash lookup.
1226         * config/tc-ppc.c (ppc_macro): Warning fix.
1227
1228         * as.h (ENABLE_CHECKING): Default define to 0.
1229         (know): Assert if ENABLE_CHECKING.
1230         (struct relax_type): Remove superfluous declaration.
1231         * configure.in (--enable-checking): New.
1232         * configure: Regenerate.
1233         * config.in: Regenerate.
1234         * config/tc-ppc.c (ppc_setup_opcodes): Do checks when ENABLE_CHECKING.
1235         Check for duplicate powerpc_operands entries.
1236
1237 2007-04-20  Nathan Sidwell  <nathan@codesourcery.com>
1238
1239         * config/tc-m68k.c (mcf5253_ctrl): New.
1240         (mcf52223_ctrl): New.
1241         (m68k_cpus): Add 5253, 52221, 52223.
1242
1243         * config/m68k-parse.h (RAMBAR_ALT): New.
1244         * config/tc-m68k.c (mcf5206_ctrl, mcf5307_ctrl): New.
1245         (mcf_ctrl, mcf5208_ctrl, mcf5210a_ctrl, mcf5213_ctrl, mcf52235_ctrl,
1246         mcf5225_ctrl, mcf5235_ctrl, mcf5271_ctrl, mcf5275_ctrl,
1247         mcf5282_ctrl, mcf5329_ctrl, mcf5373_ctrl, mcfv4e_ctrl,
1248         mcf5475_ctrl, mcf5485_ctrl): Add RAMBAR synonym for
1249         RAMBAR1.
1250         (mcf5272_ctrl): Add RAMBAR0, replace add RAMBAR with RAMBAR_ALT.
1251         (m68k_cpus): Adjust 5206, 5206e & 5307 entries.
1252         (m68k_ip) <Case J>: Detect when RAMBAR_ALT should be used.  Add it
1253         to control register mapping.
1254
1255 2007-04-20  Alan Modra  <amodra@bigpond.net.au>
1256
1257         * messages.c (as_internal_value_out_of_range): Fix typo in
1258         error message.  Return after printing domain error.
1259         * config/tc-ppc.c (ppc_insert_operand): Preserve low zero bits
1260         in max when shifting right.
1261
1262 2007-04-20  Alan Modra  <amodra@bigpond.net.au>
1263
1264         * messages.c (as_internal_value_out_of_range): Extend to report
1265         errors for values with invalid low bits set.
1266         * config/tc-ppc.c (ppc_setup_opcodes): Check powerpc_operands bitm
1267         fields.  Check that operands and opcode fields are disjoint.
1268         (ppc_insert_operand): Check operands using mask rather than bit
1269         count.   Check low bits too.  Handle PPC_OPERAND_PLUS1.  Adjust
1270         insertion code.
1271         (md_apply_fix): Adjust for struct powerpc_operand change.
1272
1273 2007-04-19  Paul Brook  <paul@codesourcery.com>
1274
1275         * config/tc-arm.c (md_assemble): Only allow 16-bit instructions on
1276         Thumb-1.  Add sanity check for bogus relaxations.
1277
1278 2007-04-19  Paul Brook  <paul@codesourcery.com>
1279
1280         * config/tc-arm.c (insns): Allow rsb and rsbs on Thumb-1.
1281
1282 2007-04-19  Alan Modra  <amodra@bigpond.net.au>
1283
1284         * Makefile.am: Run "make dep-am".
1285         * Makefile.in: Regenerate.
1286
1287 2007-04-19  Nathan Froyd <froydnj@codesourcery.com>
1288
1289         * doc/c-ppc.texi (PowerPC-Opts): Document -me500, -me500x2, -mspe.
1290
1291 2007-04-18  H.J. Lu <hongjiu.lu@intel.com>
1292
1293         * doc/c-i386.texi; Document .ssse3, .sse4.1, .sse4.2 and .sse4.
1294
1295 2007-04-18  H.J. Lu <hongjiu.lu@intel.com>
1296
1297         * config/tc-i386.c (cpu_arch): Add .sse4.2 and .sse4.
1298         (match_template): Handle operand size for crc32 in SSE4.2.
1299         (process_suffix): Handle operand type for crc32 in SSE4.2.
1300         (output_insn): Support SSE4.2.
1301
1302 2007-04-18  H.J. Lu <hongjiu.lu@intel.com>
1303
1304         * config/tc-i386.c (cpu_arch): Add .sse4.1.
1305         (process_operands): Adjust implicit operand for blendvpd,
1306         blendvps and pblendvb in SSE4.1.
1307         (output_insn): Support SSE4.1.
1308
1309 2007-04-18  Paul Brook  <paul@codesourcery.com>
1310
1311         * config/tc-arm.c (do_t_rsb): Use 16-bit encoding when possible.
1312
1313 2007-04-16  Kaz Kojima  <kkojima@rr.iij4u.or.jp>
1314
1315         * config/tc-sh.c (sh_handle_align):  Call as_bad_where instead
1316         of as_warn_where for misaligned data.
1317
1318 2007-04-15  Kaz Kojima  <kkojima@rr.iij4u.or.jp>
1319
1320         * config/tc-sh.c (align_test_frag_offset_fixed_p): Handle
1321         rs_fill frags.
1322
1323 2007-04-14  Steve Ellcey  <sje@cup.hp.com>
1324
1325         * Makefile.am: Add ACLOCAL_AMFLAGS.
1326         * Makefile.in: Regenerate.
1327
1328 2007-04-14  Kaz Kojima  <kkojima@rr.iij4u.or.jp>
1329
1330         * config/tc-sh.c (align_test_frag_offset_fixed_p): New.
1331         (sh_optimize_expr): Likewise.
1332         * config/tc-sh.h (md_optimize_expr): Define.
1333         (sh_optimize_expr): Prototype.
1334
1335 2007-04-06  Matt Thomas  <matt@netbsd.org>
1336
1337         * config/tc-vax.c (vax_cons): Added to support %pcrel{8,16,32}(exp)
1338         to emit pcrel relocations by DWARF2 in non-code sections.  Borrowed
1339         heavily from tc-sparc.c.  (vax_cons_fix_new): Likewise.
1340
1341 2007-04-04  Kazu Hirata  <kazu@codesourcery.com>
1342
1343         * config/tc-m68k.c (HAVE_LONG_BRANCH): Add fido_a.
1344
1345 2007-04-04  Paul Brook  <paul@codesourcery.com>
1346
1347         * config/tc-arm.c (do_neon_ext): Enforce immediate range.
1348         (insns): Use I15 for vext.
1349
1350 2007-04-04  Paul Brook  <paul@codesourcery.com>
1351
1352         * configure.tgt: Loosen checks for arm uclinux eabi targets.
1353
1354 2007-04-02  Sterling Augustine  <sterling@tensilica.com>
1355
1356         * config/tc-xtensa.c (xtensa_flush_pending_output): Check
1357         outputting_stabs_line_debug.
1358
1359 2007-03-26  Anatoly Sokolov <aesok@post.ru>
1360
1361         * config/tc-avr.c (mcu_types): Add support for at90pwm1, at90usb82,
1362         at90usb162, atmega325p, atmega329p, atmega3250p and atmega3290p
1363         devices.
1364         * doc/c-avr.texi: Document new devices.
1365
1366 2007-04-02  Richard Sandiford  <richard@codesourcery.com>
1367
1368         * doc/as.texinfo: Add -mvxworks-pic to the list of MIPS options.
1369         * doc/c-mips.texi (-KPIC, -mvxworks-pic): Document.
1370         * config/tc-mips.c (md_show_usage): Mention -mvxworks-pic.
1371
1372 2007-03-30  Sterling Augustine  <sterling@tensilica.com>
1373             Bob Wilson  <bob.wilson@acm.org>
1374
1375         * config/tc-xtensa.c (xtensa_move_labels): Remove loops_ok argument.
1376         Do not check is_loop_target flag.
1377         (xtensa_frob_label): Adjust calls to xtensa_move_labels.
1378         (xg_assemble_vliw_tokens): Likewise.  Also avoid calling
1379         xtensa_move_labels for alignment of loop opcodes.
1380
1381 2007-03-30  H.J. Lu  <hongjiu.lu@intel.com>
1382
1383         * config/tc-i386.c (process_suffix): Reindent a bit.
1384
1385 2007-03-30  Paul Brook  <paul@codesourcery.com>
1386
1387         * config/tc-arm.c (encode_thumb2_ldmstm): New function.
1388         (do_t_ldmstm): Generate 16-bit push/pop.  Use encode_thumb2_ldmstm.
1389         (do_t_push_pop):  Use encode_thumb2_ldmstm.
1390
1391 2007-03-29  DJ Delorie  <dj@redhat.com>
1392
1393         * config/tc-m32c.c (rl_for, relaxable): Protect argument.
1394         (md_relax_table): Add entries for ADJNZ macros.
1395         (M32C_Macros): Add ADJNZ macros.
1396         (subtype_mappings): Add entries for ADJNZ macros.
1397         (insn_to_subtype): Check for adjnz and sbjnz insns.
1398         (md_estimate_size_before_relax): Pass insn to insn_to_subtype.
1399         (md_convert_frag): Convert adjnz and sbjnz.
1400
1401 2007-03-29  Nick Clifton  <nickc@redhat.com>
1402
1403         * itbl-ops.c (itbl_entry): Remove unnecessary and excessively long
1404         initialization.
1405         * itbl-ops.h (enum e_processor): Initialise the e_nprocs field
1406         using ITBL_NUMBER_OF_PROCESSORS.
1407         * itbl-parse.y (yyerror): Remove use of redundant macro PARAMS.
1408
1409 2007-03-28  H.J. Lu  <hongjiu.lu@intel.com>
1410
1411         * config/tc-i386.c (build_modrm_byte): For instructions with 2
1412         register operands, encode destination in i.rm.regmem if its
1413         RegMem bit is set.
1414
1415 2007-03-28  Richard Sandiford  <richard@codesourcery.com>
1416             Phil Edwards  <phil@codesourcery.com>
1417
1418         * doc/as.texinfo: Put the contents after the title page rather
1419         than at the end of the document.
1420
1421 2007-03-27  Alan Modra  <amodra@bigpond.net.au>
1422
1423         * NEWS: Mention ".reloc".
1424
1425 2007-03-26  Sterling Augustine  <sterling@tensilica.com>
1426
1427         * config/tc-xtensa.c (xg_translate_idioms): Allow assembly idioms
1428         in FLIX instructions.
1429
1430 2007-03-26  Julian Brown  <julian@codesourcery.com>
1431
1432         * config/tc-arm.c (arm_it): Add immisfloat field.
1433         (parse_qfloat_immediate): Disallow integer syntax for floating-point
1434         immediates. Fix hex immediates, handle 0.0 and -0.0 specially.
1435         (parse_neon_mov): Set immisfloat bit for operand if it parsed as a
1436         float.
1437         (neon_cmode_for_move_imm): Reject non-float immediates for float
1438         operands.
1439         (neon_move_immediate): Pass immisfloat bit to neon_cmode_for_move_imm.
1440
1441 2007-03-26  Julian Brown  <julian@codesourcery.com>
1442
1443         * doc/c-arm.texi: Add documentation for .dn/.qn directives.
1444
1445 2007-03-26  Alan Modra  <amodra@bigpond.net.au>
1446
1447         * doc/as.texinfo (Reloc): Document.
1448         * read.c (potable): Add "reloc".
1449         (s_reloc): New function.
1450         * write.c (reloc_list): New global var.
1451         (resolve_reloc_expr_symbols): New function.
1452         (write_object_file): Call it.
1453         (write_relocs): Process reloc_list.
1454         * write.h (struct reloc_list): New.
1455         (reloc_list): Declare.
1456
1457 2007-03-24  Paul Brook  <paul@codesourcery.com>
1458
1459         * config/tc-arm.c (do_t_ldmstm): Error on Thumb-2 addressing modes.
1460
1461 2007-03-24  Paul Brook  <paul@codesourcery.com>
1462         Mark Shinwell  <shinwell@codesourcery.com>
1463
1464         * config/tc-arm.c (operand_parse_code): Add OP_oRRw.
1465         (parse_operands): Don't expect comma if first operand missing.
1466         Handle OP_oRRw.
1467         (do_srs): Encode register number, checking it is r13.  Update comment.
1468         (insns): Update SRS entries to take a register.
1469
1470 2007-03-23  H.J. Lu  <hongjiu.lu@intel.com>
1471
1472         * config/tc-i386.c (md_begin): Allow '.' in mnemonic.
1473
1474 2007-03-23  Mark Shinwell  <shinwell@codesourcery.com>
1475
1476         * config/tc-arm.c (md_apply_fix): Turn CBZ instructions that
1477         attempt to jump to the next instruction into NOPs.
1478
1479 2007-03-23  Alan Modra  <amodra@bigpond.net.au>
1480
1481         * config/tc-spu.c: Don't include opcode/spu.h.
1482         (md_assemble): Set tc_fix_data.insn_tag and arg_format.
1483         (md_apply_fix): Adjust.
1484         * config/tc-spu.h: Include opcode/spu.h.
1485         (struct tc_fix_info): New.
1486         (TC_FIX_TYPE, TC_INIT_FIX_DATA): Adjust.
1487         (TC_FORCE_RELOCATION): Define.
1488
1489 2007-03-22  Joseph Myers  <joseph@codesourcery.com>
1490
1491         * doc/as.texinfo: Include VERSION_PACKAGE when reporting version.
1492
1493 2007-03-21  H.J. Lu  <hongjiu.lu@intel.com>
1494
1495         * config/tc-i386.c (process_suffix): Check 0x90 instead of
1496         xchg for xchg %rax,%rax.
1497
1498 2007-03-21  H.J. Lu  <hongjiu.lu@intel.com>
1499
1500         * config/tc-i386.c: Replace REX_MODE64, REX_EXTX, REX_EXTY
1501         and REX_EXTZ with REX_W, REX_R, REX_X and REX_B respectively.
1502
1503 2007-03-21  H.J. Lu  <hongjiu.lu@intel.com>
1504
1505         PR binutils/4218
1506         * config/tc-i386.c (match_template): Properly handle 64bit mode
1507         "xchg %eax, %eax".
1508
1509 2007-03-21  Anton Ertl  <anton@mips.complang.tuw>
1510
1511         PR gas/4124
1512         * config/tc-alpha.c (emit_ustX): Fix ustq code generation.
1513
1514 2007-03-21  H.J. Lu  <hongjiu.lu@intel.com>
1515
1516         * Makefile.am: Run dep-am.
1517         * Makefile.in: Regenerated.
1518
1519         * config/tc-i386.c: Don't include "opcodes/i386-opc.h".
1520
1521         * config/tc-i386.h: Include "opcodes/i386-opc.h".
1522         (NOP_OPCODE): Removed.
1523         (template): Likewise.
1524
1525 2007-03-21  Andreas Schwab  <schwab@suse.de>
1526
1527         * config/tc-i386.h (NOP_OPCODE): Restore.
1528
1529 2007-03-18  Mark Shinwell  <shinwell@codesourcery.com>
1530
1531         * config/tc-arm.c (do_mul): Don't warn about overlapping
1532         Rd and Rm operands when assembling for v6 or above.
1533         Correctly capitalize register names in the messages.
1534         (do_mlas): Likewise.  Delete spurious blank line.
1535
1536 2007-03-16  Kazu Hirata  <kazu@codesourcery.com>
1537
1538         * config/tc-m68k.c (m68k_cpus): Add an entry for fidoa.
1539
1540 2007-03-15  H.J. Lu  <hongjiu.lu@intel.com>
1541
1542         * config/tc-i386.c (md_begin): Use i386_regtab_size to scan
1543         i386_regtab.
1544         (parse_register): Use i386_regtab_size instead of ARRAY_SIZE
1545         on i386_regtab.
1546
1547 2007-03-15  Alexandre Oliva  <aoliva@redhat.com>
1548
1549         PR gas/4184
1550         * app.c (do_scrub_chars): PUT after setting states.
1551
1552 2007-03-15  H.J. Lu  <hongjiu.lu@intel.com>
1553
1554         * Makefile.am: Run "make dep-am".
1555         * Makefile.in: Regenerated.
1556
1557         * config/tc-i386.c: Include "opcodes/i386-opc.h" instead of
1558         "opcode/i386.h".
1559         (md_begin): Check reg_name != NULL for the last entry in
1560         i386_regtab.
1561
1562         * config/tc-i386.h: Move many entries to opcode/i386.h and
1563         opcodes/i386-opc.h.
1564
1565         * configure.in (need_opcodes): Set true for i386.
1566         * configure: Regenerated.
1567
1568 2007-03-15  H.J. Lu  <hongjiu.lu@intel.com>
1569
1570         * Makefile.am (REPORT_BUGS_TO): Removed.
1571         (INCLUDES): Remove -DREPORT_BUGS_TO.
1572         * Makefile.in: Regenerated.
1573
1574         * configure.in (--with-bugurl): Removed.
1575         * configure: Regenerated.
1576
1577         * doc/Makefile.am (as_TEXINFOS): Remove gasver.texi.
1578         (AM_MAKEINFOFLAGS): Add -I ../../bfd/doc.
1579         (TEXI2DVI): Likewise.
1580         (gasver.texi): Removed.
1581         (MOSTLYCLEANFILES): Remove gasver.texi.
1582         (as.1): Don't depend on gasver.texi.
1583         * doc/Makefile.in: Regenerated.
1584
1585         * doc/as.texi: Include bfdver.texi instead of gasver.texi.
1586
1587 2007-03-14  Daniel Jacobowitz  <dan@codesourcery.com>
1588
1589         * config/tc-arm.c (arm_copy_symbol_attributes): New.
1590         * config/tc-arm.h (arm_copy_symbol_attributes): Declare.
1591         (TC_COPY_SYMBOL_ATTRIBUTES): Define.
1592         * gas/symbols.c (copy_symbol_attributes): Use
1593         TC_COPY_SYMBOL_ATTRIBUTES.
1594
1595 2007-03-14  Paul Brook  <paul@codesourcery.com>
1596
1597         * config/tc-arm.c (T16_32_TAB): Fix dec_sp encoding.
1598
1599 2007-03-14  Alan Modra  <amodra@bigpond.net.au>
1600
1601         PR 4029
1602         * write.c (relax_segment): Insert extra alignment padding
1603         to break infinite relax loop when given impossible
1604         gcc_except_table assembly.
1605
1606 2007-03-12  H.J. Lu  <hongjiu.lu@intel.com>
1607
1608         * config/tc-i386.c (md_assemble): Use Opcode_XXX instead of XXX
1609         on i.tm.base_opcode.
1610         (match_template): Likewise.
1611         (process_operands): Use ~0x3 mask to match MOV_AX_DISP32.
1612
1613         * config/tc-i386.h (Opcode_D): New.
1614         (Opcode_FloatR): Likewise.
1615         (Opcode_FloatD): Likewise.
1616         (D): Redefined.
1617         (W): Likewise.
1618         (FloatMF): Likewise.
1619         (FloatR): Likewise.
1620         (FloatD): Likewise.
1621
1622 2007-03-09  Alexandre Oliva  <aoliva@redhat.com>
1623
1624         * app.c (do_scrub_chars): Recognize comments after # line "file".
1625         * read.c (get_linefile_number): New.
1626         (s_app_line): Accept ill-formed .linefile lines as comments.
1627
1628 2007-03-09  Alan Modra  <amodra@bigpond.net.au>
1629
1630         * config/tc-i386.h (WORKING_DOT_WORD): Define.
1631
1632 2007-03-09  Alexandre Oliva  <aoliva@redhat.com>
1633
1634         * app.c (do_scrub_chars): Turn #<line>"file"flags into .linefile.
1635         * as.h (new_logical_line_flags): New.
1636         * input-scrub.c (new_logical_line): Turned into wrapper for...
1637         (new_logical_line_flags): this.  Handle flags.
1638         * read.c (potable): Add linefile.  Adjust appline argument.
1639         (s_app_file): Fake .appfiles no more.
1640         (s_app_line): For .linefile, accept file name and flags.
1641
1642 2007-03-08  Alan Modra  <amodra@bigpond.net.au>
1643
1644         * symbols.c (symbol_relc_make_sym): Comment typo fixes.
1645
1646 2007-03-08  Alan Modra  <amodra@bigpond.net.au>
1647
1648         * Makefile.am: Run "make dep-am".
1649         * Makefile.in: Regenerate.
1650         * po/POTFILES.in: Regenerate.
1651
1652 2007-03-07  Joseph Myers  <joseph@codesourcery.com>
1653
1654         * configure.in (REPORT_BUGS_TEXI): Define to Texinfo version of
1655         bug-reporting URL.
1656         * doc/Makefile.am (gasver.texi): Define BUGURL.
1657         * doc/as.texinfo: Use BUGURL.
1658         * Makefile.in, configure, doc/Makefile.in: Regenerate.
1659
1660 2007-03-06  Andreas Krebbel  <krebbel1@de.ibm.com>
1661
1662         * config/tc-s390.c (md_parse_option): z9-ec option added.
1663
1664 2007-03-02  Paul Brook  <paul@codesourcery.com>
1665
1666         * config/tc-arm.c (relax_immediate): Always return positive values.
1667         (relaxed_symbol_addr): New function.
1668         (relax_adr, relax_branch): Use it.
1669         (arm_relax_frag): Pass strect argument.  Adjust infinite loop check.
1670
1671 2007-03-01  Joseph Myers  <joseph@codesourcery.com>
1672
1673         * as.c (parse_args): Update copyright date.
1674
1675 2007-02-28  Nathan Sidwell  <nathan@codesourcery.com>
1676
1677         * configure.tgt (sh-*-uclinux, sh[12]-*-uclinux): Specify as elf.
1678
1679 2007-02-28  Nick Clifton  <nickc@redhat.com>
1680
1681         PR gas/3797
1682         * config/tc-d10v.c (do_assemble): Do not generate error messages,
1683         just return -1 whenever a problem is encountered.
1684         (md_assemble): If do_assemble returns -1 generate a non-fatal
1685         error message and return.
1686
1687         PR gas/2623
1688         * config/tc-msp430.c (line_separator_char): Change to '{'.
1689
1690 2007-02-27  Alan Modra  <amodra@bigpond.net.au>
1691
1692         * config/tc-m68hc11.c (fixup24): Correct fixup size.
1693         (build_jump_insn): Likewise.
1694         (build_insn): Likewise.
1695         (s_m68hc11_relax): Likewise.
1696
1697 2007-02-27  Alan Modra  <amodra@bigpond.net.au>
1698
1699         * config/obj-elf.c (elf_frob_file): frag_wane any new frags.
1700
1701 2007-02-25  Mark Shinwell  <shinwell@codesourcery.com>
1702
1703         * config/tc-arm.c (do_vfp_nsyn_pop): Use fldmias/fldmiad.
1704
1705 2007-02-23  Alan Modra  <amodra@bigpond.net.au>
1706
1707         * config/tc-mn10300.c (md_convert_frag): Correct fixup size.
1708         (md_assemble): Likewise.
1709
1710 2007-02-22  Alan Modra  <amodra@bigpond.net.au>
1711
1712         * write.c (size_seg): Always clear SEC_RELOC here.
1713         (install_reloc): New function, extracted from..
1714         (write_relocs): ..here.  Combine RELOC_EXPANSION_POSSIBLE code
1715         with !RELOC_EXPANSION_POSSIBLE code.  Don't add fr_offset when
1716         testing frag size.  Set SEC_RELOC here.
1717
1718 2007-02-21  Alan Modra  <amodra@bigpond.net.au>
1719
1720         PR 4082
1721         * config/tc-avr.h (TC_FX_SIZE_SLACK): Define.
1722
1723 2007-02-20  Thiemo Seufer  <ths@mips.com>
1724
1725         * doc/c-mips.texi: Document 74kc, 74kf, 74kx.
1726
1727 2007-02-20  Thiemo Seufer  <ths@mips.com>
1728
1729         * config/tc-mips.c (mips_cpu_info_table): Add 74K configurations.
1730
1731 2007-02-20  Thiemo Seufer  <ths@mips.com>
1732             Chao-Ying Fu  <fu@mips.com>
1733
1734         * config/tc-mips.c (mips_set_options, mips_opts, file_ase_dspr2,
1735         ISA_SUPPORTS_DSPR2_ASE, MIPS_CPU_ASE_DSPR2): Add DSP R2 ASE support.
1736         (macro_build): Add case '2'.
1737         (macro): Expand M_BALIGN to nop, packrl.ph or balign.
1738         (validate_mips_insn): Add support for balign instruction.
1739         (mips_ip): Handle DSP R2 instructions. Support balign instruction.
1740         (OPTION_DSPR2, OPTION_NO_DSPR2, OPTION_COMPAT_ARCH_BASE,
1741         md_parse_option, mips_after_parse_args): Add -mdspr2 and -mno-dspr2
1742         command line options.
1743         (s_mipsset): Add support for .set dspr2 and .set nodspr2 directives.
1744         (md_show_usage): Add -mdspr2 and -mno-dspr2 help output.
1745         * doc/c-mips.texi, doc/as.texinfo: Document -mdspr2, -mno-dspr2,
1746         .set dspr2, .set nodspr2.
1747
1748 2007-02-20  Nathan Sidwell  <nathan@codesourcery.com>
1749
1750         * config/tc-m68k.c (mcf5210a_ctrl, mcf52235_ctrl, mcf5225_ctrl): New.
1751         (m68k_cpus): Add 5210a..5211a, 52230..52235 5224..5225.
1752
1753 2007-02-18  Alan Modra  <amodra@bigpond.net.au>
1754
1755         * write.c (TC_FX_SIZE_SLACK): Define.
1756         (write_relocs): Reinstate check for fixup within frag.
1757         * config/tc-bfin.h (TC_FX_SIZE_SLACK): Define.
1758         * config/tc-h8300.h (TC_FX_SIZE_SLACK): Define.
1759         * config/tc-mmix.h (TC_FX_SIZE_SLACK): Define.
1760         * config/tc-sh.h (TC_FX_SIZE_SLACK): Define.
1761         * config/tc-xstormy16.h (TC_FX_SIZE_SLACK): Define.
1762
1763 2007-02-17  Mark Mitchell  <mark@codesourcery.com>
1764             Nathan Sidwell  <nathan@codesourcery.com>
1765             Vladimir Prus  <vladimir@codesourcery.com
1766             Joseph Myers  <joseph@codesourcery.com>
1767
1768         * configure.in (--with-bugurl): New option.
1769         * configure: Regenerate.
1770         * dep-in.sed: Remove bin-bugs.h.
1771         * Makefile.am (REPORT_BUGS_TO): Define.
1772         (INCLUDES): Define REPORT_BUGS_TO.
1773         (DEP_INCLUDES): Likewise.
1774         ($(OBJS)): No longer depend on bin-bugs.h.
1775         * Makefile.in: Regenerate.
1776         * doc/Makefile.in: Regenerate.
1777         * as.c (show_usage): Don't print empty REPORT_BUGS_TO.
1778         * as.h: Remove include of bin-bugs.h.
1779
1780 2007-02-17  Alan Modra  <amodra@bigpond.net.au>
1781
1782         * write.c: White space fixes.
1783         (fixup_segment): Move symbol_mri_common_p adjustments..
1784         (write_relocs): ..and symbol_equated_reloc_p adjustments..
1785         (adjust_reloc_syms): ..to here.
1786
1787 2007-02-16  Alan Modra  <amodra@bigpond.net.au>
1788
1789         * subsegs.c (subseg_change, subseg_get): Use xcalloc rather than
1790         xmalloc, memset.  Don't bother assigning NULL to known zero mem.
1791         (subseg_set_rest): Remove unnecessary cast.
1792         * write.c: Include libbfd.h.  Replace PTR with void * throughout.
1793         Remove unnecessary forward declarations and casts.
1794         (set_symtab): Delete extern bfd_alloc.
1795         (fixup_segment): Move.
1796
1797 2007-02-15  Nathan Sidwell  <nathan@codesourcery.com>
1798
1799         * config/m68k-parse.h (m68k_register): Add ROMBAR0, ASID.
1800         * config/tc-m68k.c (mcfv4e_ctrl): Add ColdFire specific names.
1801         (mcf5475_ctrl, mcf5485_ctrl): New.
1802         (m68k_cpus): Use mcf5485_ctrl and mcf5485_ctrl for those families.
1803         (m68k_ip): Add ASID, MMUBAR, ROMBAR0 handling.
1804         (init_table): Add asid, mmubar, adjust rombar0.
1805
1806 2007-02-14  Alan Modra  <amodra@bigpond.net.au>
1807
1808         * config/tc-i386.h (Seg2ShortForm, Seg3ShortForm): Delete.
1809         * config/tc-i386.c: Wrap overly long lines, whitespace fixes.
1810         (process_operands): Move old Seg2ShortForm and Seg3ShortForm
1811         code, and test for these insns using a combination of
1812         opcode_modifier and operand_types.
1813
1814 2007-02-07  Paul Brook  <paul@codesourcery.com>
1815
1816         * configure.tgt: Add arm*-*-uclinux-*eabi.
1817
1818 2007-02-05  Dave Brolley  <brolley@redhat.com>
1819             Richard Sandiford  <rsandifo@redhat.com>
1820             DJ Delorie  <dj@redhat.com>
1821             Stan Cox  <scox@redhat.com>
1822             Jim Blandy  <jimb@redhat.com>
1823             Nick Clifton  <nickc@redhat.com>
1824             Jim Wilson  <wilson@redhat.com>
1825             Frank Ch. Eigler  <fche@redhat.com>
1826             Graydon Hoare  <graydon@redhat.com>
1827             Ben Elliston  <bje@redhat.com>
1828             John Healy  <jhealy@redhat.com>
1829             Richard Henderson  <rth@redhat.com>
1830
1831         * Makefile.am (CPU_TYPES): Add mep.
1832         (TARGET_CPU_CFILES): Add tc-mep.c.
1833         (TARGET_CPU_HFILES): Add tc-mep.h.
1834         (DEPTC_mep_elf): New variable.
1835         (DEPTC_mep_coff): Likewise.
1836         (DEPOBJ_mep_coff, DEPOBJ_mep_elf, DEP_mep_coff, DEP_mep_elf): Likewise.
1837         * configure.in: Support mep.
1838         * configure.tgt: Likewise.
1839         * config/tc-mep.c: New file.
1840         * config/obj-elf.c: New file.
1841         * config/tc-mep.c: New file.
1842         * config/tc-mep.h: New file.
1843         * testsuite/gas/mep: New testsuite with content.
1844         * Makefile.in: Regenerate.
1845         * configure: Regenerate.
1846
1847 2007-02-05  Dave Brolley  <brolley@redhat.com>
1848
1849         * cgen.c (gas_cgen_install_complex_reloc): Removed.
1850         (complex_reloc_installation_howto): Removed.
1851
1852 2007-02-05  Dave Brolley  <brolley@redhat.com>
1853             Graydon Hoare  <graydon@redhat.com>
1854             DJ Delorie  <dj@redhat.com>
1855             Catherine Moore  <clm@redhat.com>
1856             Michael Chastain  <chastain@redhat.com>
1857             Frank Ch. Eigler  <fche@redhat.com>
1858
1859         * symbols.c (use_complex_relocs_for): New, to decide
1860         when to use complex relocs. Add signed RELC support.
1861         (resolve_symbol_value): Call use_complex_relocs_for. Unconditionally
1862         encode expression symbols as mangled complex relocation symbols (when
1863         compiled with -DOBJ_COMPLEX_RELOC).
1864         (symbol_relc_make_sym,value,expr): New traversal/conversion routines.
1865         * cgen.c (gas_cgen_md_apply_fix3):  Only set signed_p if RELC. Call
1866         encode_addend with new args. Modify to get start, length from
1867         ifield whenever it is set. Also change condition on which
1868         self-describing relocs are encoded. Add hook into
1869         gas_cgen_encode_addend.
1870         (queue_fixup_recursively): Add signed RELC support. Change from masked
1871         expr to trunc flag. Restore assignment of sub-field value to
1872         temporary in fixups array. Reflect changed meaning of last arg to
1873         queue_fixup_recursively.
1874         (fixup): Add cgen_maybe_multi_ifield member.
1875         (make_right_shifted_expr): New function.
1876         (queue_fixup): Change to recursive function that fragments
1877         fixups if operand has a multi-ifield.
1878         (gas_cgen_parse_operand): Add RELC code to wrap expressions in
1879         symbols, call weak_operand_overflow_check, and fragment call
1880         queue_fixup with operand fields.
1881         (gas_cgen_finish_insn) Modify to manage ifield pointer.
1882         (weak_operand_overflow_check): New function to try to select
1883         insns correctly.
1884         (gas_cgen_encode_addend): New function for relc.
1885         (gas_cgen_install_complex_reloc): Likewise.
1886         (gas_cgen_tc_gen_reloc): Add hook into gas_cgen_install_complex_reloc.
1887         * write.h (struct fix): Add msb_field_p to fx_cgen sub-struct. Add
1888         cgen_maybe_multi_ifield field to fx_cgen substructure.
1889         * cgen.h (GAS_CGEN_MAX_FIXUPS): Bump from 3 up to 32.
1890         * symbols.h (symbol_relc_make_sym,value,expr): New prototypes.
1891
1892 2007-02-03  DJ Delorie  <dj@delorie.com>
1893
1894         * config/tc-m32c.c (m32c_cons_fix_new): New.  Added to support 3
1895         byte relocs.
1896         * config/tc-m32c.h (TC_CONS_FIX_NEW): Define.
1897         (m32c_cons_fix_new): Prototype.
1898
1899 2007-02-02  Bob Wilson  <bob.wilson@acm.org>
1900
1901         * config/tc-xtensa.c (xg_build_to_insn): Use tinsn_init.
1902         (xg_expand_assembly_insn, istack_push_space, istack_pop): Likewise.
1903
1904 2007-02-02  Bob Wilson  <bob.wilson@acm.org>
1905
1906         * config/tc-xtensa.c (SUFFIX_MAP, suffix_relocs): New.
1907         (xtensa_elf_suffix): Use suffix_relocs instead of local mapping table.
1908         (map_suffix_reloc_to_operator): New.
1909         (map_operator_to_reloc): New.
1910         (expression_maybe_register): Fix incorrect test of return value from
1911         xtensa_elf_suffix.  Rearrange to use map_suffix_reloc_to_operator.
1912         (xg_assemble_literal, convert_frag_immed): Use map_operator_to_reloc.
1913
1914 2007-02-02  Bob Wilson  <bob.wilson@acm.org>
1915
1916         * config/xtensa-istack.h (struct tinsn_struct): Delete fixup field.
1917         (tinsn_get_tok): Delete prototype.
1918         * config/tc-xtensa.c (tinsn_get_tok): Delete.
1919
1920 2007-02-02  Bob Wilson  <bob.wilson@acm.org>
1921
1922         * config/xtensa-relax.h (struct build_instr): Delete id field.
1923         * config/xtensa-relax.c (widen_spec_list): Remove zeros from LITERAL
1924         and LABEL tokens.
1925         (append_literal_op, append_label_op): Remove litnum/labnum arguments;
1926         set op_data fields to zero.
1927         (parse_id_constant): Delete.
1928         (build_transition): Remove code to handle numbered literals and labels.
1929
1930 2007-02-02  Bob Wilson  <bob.wilson@acm.org>
1931
1932         * config/xtensa-relax.c (build_transition): Remove code after as_fatal.
1933         (build_transition_table): Likewise.
1934
1935 2007-02-01  Bob Wilson  <bob.wilson@acm.org>
1936
1937         * config/tc-xtensa.c (xg_add_opcode_fix, md_apply_fix): Delete use of
1938         fx_tcbit.
1939         * config/tc-xtensa.h (TC_FORCE_RELOCATION_LOCAL): Remove.
1940
1941 2007-02-02  Alan Modra  <amodra@bigpond.net.au>
1942
1943         * write.h (struct fix <fx_pcrel_adjust, fx_size>): Move.
1944         (struct fix <fx_plt>): Rename to tcbit2.
1945         * write.c (fix_new_internal): Adjust.
1946         (TC_FORCE_RELOCATION_LOCAL): Don't test fx_plt.
1947         * config/tc-arm.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1948         * config/tc-cris.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1949         * config/tc-i386.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1950         * config/tc-i960.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1951         * config/tc-sh.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1952         * config/tc-sh64.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1953         * config/tc-sparc.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1954         * config/tc-msp430.c (msp430_force_relocation_local): Likewise.
1955         * config/tc-ia64.c (emit_one_bundle): Don't set fx_plt.
1956         * config/tc-ia64.h (TC_FORCE_RELOCATION_LOCAL): Don't test fx_plt.
1957         Instead, compare fx_r_type.
1958         * config/tc-xtensa.c (xg_add_opcode_fix, md_apply_fix): Use
1959         fx_tcbit in place of fx_plt.
1960         * config/tc-xtensa.h (TC_FORCE_RELOCATION_LOCAL): Define.
1961         * doc/internals.texi (TC_FORCE_RELOCATION_LOCAL): Remove reference
1962         to fx_plt.
1963
1964 2007-01-30  Nick Clifton  <nickc@redhat.com>
1965
1966         * as.c (main): Mark symbols created via the --defsym command line
1967         option as volatile so that they can be overridden later on by a
1968         .set directive.  This maintains compatibility with the behaviour
1969         of earlier versions of the assembler.
1970         * doc/as.texinfo (--defsym): Document that the defined symbol's
1971         value can be overridden via a .set directive.
1972
1973 2007-01-28  H.J. Lu  <hongjiu.lu@intel.com>
1974
1975         * config/tc-i386.c (swap_imm_operands): Renamed to ...
1976         (swap_2_operands): This.  Take 2 ints.
1977         (md_assemble): Updated.
1978         (swap_operands): Call swap_2_operands to swap 2 operands.
1979
1980 2007-01-24  DJ Delorie  <dj@redhat.com>
1981
1982         * config/tc-m32c.c (md_pseudo_table): Add .3byte.
1983
1984 2007-01-22  Nick Clifton  <nickc@redhat.com>
1985
1986         PR gas/3871
1987         * tc-score.c: Remove unnecessary uses of _().
1988         Make the err_msg[] a file level local array in order to save
1989         storage space.
1990         Remove unnecessary sprintf()s.
1991
1992 2007-01-18  Mei Ligang  <ligang@sunnorth.com.cn>
1993
1994         PR gas/3871
1995         * config/tc-score.c : Using _() for const string.
1996         Do not assign inst.error with a local string pointer.
1997         (md_section_align): Pad section.
1998
1999 2007-01-13  H.J. Lu  <hongjiu.lu@intel.com>
2000
2001         * config/tc-i386.c (build_modrm_byte): Check number of operands
2002         when procssing memory/register operand.
2003
2004 2007-01-12  Nick Clifton  <nickc@redhat.com>
2005
2006         PR gas/3856
2007         * macro.c (expand_irp): Do not ignore spaces inside quoted
2008         strings.
2009
2010 2007-01-12  Alan Modra  <amodra@bigpond.net.au>
2011
2012         * config/tc-spu.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
2013         * config/tc-m32r.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
2014         * config/tc-mn10300.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
2015         (TC_FORCE_RELOCATION): Define.
2016         (TC_FORCE_RELOCATION_LOCAL): Define.
2017         * config/tc-mn10300.c (mn10300_fix_adjustable): Adjust.
2018
2019 2007-01-12  Alan Modra  <amodra@bigpond.net.au>
2020
2021         * input-file.c (input_file_open): Check fgets return.
2022
2023 2007-01-11  Paul Brook  <paul@codesourcery.com>
2024
2025         * config/tc-arm.c (do_t_add_sub): Use Rd and Rs.
2026
2027 2007-01-11  Nick Clifton  <nickc@redhat.com>
2028
2029         PR gas/3707
2030         * config/tc-arm.c (md_begin): Cope with an NULL mcpu_fpu_opt
2031         variable.
2032
2033         * config/tc-mcore.c (md_number_to_chars): Use
2034         number_to_chars_{big|little}endian.
2035
2036 2007-01-08  Kazu Hirata  <kazu@codesourcery.com>
2037
2038         * config/tc-m68k.c (m68k_archs, m68k_cpus): Treat Fido as an
2039         architecture by itself.
2040         (m68k_ip): Don't issue a warning for tbl instructions on fido.
2041         (m68k_elf_final_processing): Treat Fido as an architecture by
2042         itself.
2043
2044 2007-01-08  Kai Tietz   <kai.tietz@onevision.com>
2045
2046         * configure.tgt: Renamed target x86_64-*-mingw64 to x86_64-*-mingw*
2047
2048 2007-01-05  H.J. Lu  <hongjiu.lu@intel.com>
2049
2050         * config/tc-i386.c (set_intel_syntax): Update set_intel_syntax
2051         depending on allow_naked_reg.
2052
2053 2007-01-04  Paul Brook  <paul@codesourcery.com>
2054
2055         * config/tc-arm.c (do_cpsi): Set mmod bit for 2 argument form.
2056
2057 2007-01-04  H.J. Lu  <hongjiu.lu@intel.com>
2058
2059         PR gas/3830
2060         * config/tc-i386.c (register_prefix): New.
2061         (set_intel_syntax): Set set_intel_syntax to "" if register
2062         prefix isn't needed.
2063         (check_byte_reg): Use register_prefix for error message.
2064         (check_long_reg): Likewise.
2065         (check_qword_reg): Likewise.
2066         (check_word_reg): Likewise.
2067
2068 2007-01-04  Julian Brown  <julian@codesourcery.com>
2069
2070         * config/tc-arm.c (do_neon_shl_imm): Swap rN, rM.
2071         (do_neon_qshl_imm): Likewise.
2072         (do_neon_rshl): New function. Handle rounding variants of
2073         v{q}shl-by-register.
2074         (insns): Use do_neon_rshl for vrshl, vqrshl.
2075
2076 2007-01-04  Paul Brook  <paul@codesourcery.com>
2077
2078         * config/tc-arm.c (NEON_ENC_TAB): Fix encoding of vclt, vcle, vaclt
2079         and vacle.
2080
2081 2007-01-03  H.J. Lu  <hongjiu.lu@intel.com>
2082
2083         * config/tc-i386.c (swap_operands): Remove branches.
2084
2085 2007-01-03  H.J. Lu  <hongjiu.lu@intel.com>
2086
2087         * config/tc-i386.c: Update copyright year.
2088         * config/tc-i386.h: Likewise.
2089
2090 2007-01-03  H.J. Lu  <hongjiu.lu@intel.com>
2091
2092         * config/tc-i386.c (smallest_imm_type): Return unsigned int
2093         instead of int.
2094
2095 2007-01-03  H.J. Lu  <hongjiu.lu@intel.com>
2096
2097         * config/tc-i386.c: Convert to ISO C90 formatting
2098         * config/tc-i386.h: Likewise.
2099
2100 2007-01-03  David Daney  <ddaney@avtrex.com>
2101
2102         * config/tc-mips.c (md_show_usage):  Clean up -mno-shared
2103         documentation.
2104
2105 For older changes see ChangeLog-2006
2106 \f
2107 Local Variables:
2108 mode: change-log
2109 left-margin: 8
2110 fill-column: 74
2111 version-control: never
2112 End: