1 2004-06-20 Andreas Schwab <schwab@suse.de>
3 * config/tc-m68k.c (mri_chip): Replace current_chip, not augment.
4 (md_parse_option): Likewise.
6 2004-06-17 Jan Beulich <jbeulich@novell.com>
8 * config/tc-i386.c: Deal with LEX_QM the same way as with LEX_AT.
9 * config/te-netware.h: New file.
10 * config/te-ppcnw.h: Delete: Obsolete.
11 * configure.in: Eliminate ill NetWare targets. Make generic
12 NetWare target use proper emulation.
13 * Makefile.am: Eliminate reference to obsolete te-ppcnw.h, add
14 reference to new te-netware.h.
15 * configure: Regenerate.
16 * Makefile.in: Regenerate.
18 2004-06-15 Martin Schwidefsky <schwidefsky@de.ibm.com>
20 * config/tc-s390.c (s390_insn): Avoid incorrect signed/unsigned
21 comparison in .insn pseudo operation.
23 2004-06-15 Alan Modra <amodra@bigpond.net.au>
25 * config/obj-coff.c (coff_adjust_section_syms): Use
26 bfd_get_section_size instead of bfd_get_section_size_before_reloc.
27 (coff_frob_section): Likewise.
28 * config/tc-mips.c (md_apply_fix3): Likewise.
29 * config/obj-elf.c (elf_frob_file): Use bfd_set_section_size.
30 (elf_frob_file_after_relocs): Likewise.
32 2004-06-10 John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
34 * config/tc-hppa.c (log2): Rename to exact_log2.
35 (pa_next_subseg): Delete unused function.
36 (create_new_space): Mark unused arguments with ATTRIBUTE_UNUSED.
37 (create_new_subspace): Likewise.
40 * config/tc-hppa.c (hppa_fix_adjustable): Allow reduction of fake
43 2004-05-28 DJ Delorie <dj@redhat.com>
45 * config/tc-mn10300.h (tc_fix_adjustable): Define.
46 * config/tc-mn10300.c (mn10300_fix_adjustable): Don't adjust debug
47 or non-merged symbols.
49 2004-05-28 H.J. Lu <hongjiu.lu@intel.com>
51 * config/tc-ia64.c (remove_marked_resource): Save, clear and
52 restore the old slot when inserting srlz.i/srlz.d.
54 2004-05-28 Andrew Stubbs <andrew.stubbs@superh.com>
56 * Makefile.am: Regenerate dependecies.
57 * Makefile.in: Regenerate.
58 * config/tc-sh.c (valid_arch): Make unsigned.
59 (preset_target_arch): Likewise.
60 (md_begin): Use new architecture flags system.
61 (get_specific): Likewise.
62 (assemble_ppi): Likewise.
63 (md_assemble): Likewise. Also fix error check for bad opcodes.
64 (md_parse_option): Likewise. Also generate -isa values according
65 to the table in bfd/cpu-sh.c instead of just constants. Also
66 allow <arch>-up ISA variants.
67 (sh_elf_final_processing): Replace if-else chain with a call to
69 * testsuite/gas/sh/arch: New directory.
70 * testsuite/gas/sh/arch/arch.exp: New test script.
71 * testsuite/gas/sh/arch/arch_expected.txt: New file.
72 * testsuite/gas/sh/arch/sh.s: New file.
73 * testsuite/gas/sh/arch/sh2.s: New file.
74 * testsuite/gas/sh/arch/sh-dsp.s: New file.
75 * testsuite/gas/sh/arch/sh2e.s: New file.
76 * testsuite/gas/sh/arch/sh3-nommu.s: New file.
77 * testsuite/gas/sh/arch/sh3.s: New file.
78 * testsuite/gas/sh/arch/sh3-dsp.s: New file.
79 * testsuite/gas/sh/arch/sh3e.s: New file.
80 * testsuite/gas/sh/arch/sh4-nommu-nofpu.s: New file.
81 * testsuite/gas/sh/arch/sh4-nofpu.s: New file.
82 * testsuite/gas/sh/arch/sh4.s: New file.
83 * testsuite/gas/sh/arch/sh4a-nofpu.s: New file.
84 * testsuite/gas/sh/arch/sh4al-dsp.s: New file.
85 * testsuite/gas/sh/arch/sh4a.s: New file.
87 2004-05-28 Peter Barada <peter@the-baradas.com>
89 * config/gc-m68k.c(m68k_ip): Convert mode 5 addressing
90 with zero offset into mode 2 addressing to save a word.
92 2004-05-27 H.J. Lu <hongjiu.lu@intel.com>
94 * config/tc-ia64.c (ar_is_in_integer_unit): Removed.
95 (ar_is_only_in_integer_unit): New.
96 (ar_is_only_in_memory_unit): New.
97 (generate_unwind_image): Silence gcc on 32bit host.
98 (md_assemble): Use ar_is_only_in_integer_unit instead of
99 ar_is_in_integer_unit. Check AR access.
101 2004-05-27 Peter Barada <peter@the-baradas.com>
103 * config/tc-m68k.c (md_begin): Sort the opcode table into
105 (m68k_compare_opcode): New function to do the sorting.
107 2004-05-24 Peter Barada <peter@the-baradas.com>
109 * config/m68k-parse.y(operand): Allow for MAC/EMAC mask
110 addressing on MIT style operands.
111 * config/m68k-parse.y(yylex): Allow '-&' for predecrement
113 * config/tc-m68k.c(install_operand): Comment 'G' and 'H' type
116 2004-05-23 Alan Modra <amodra@bigpond.net.au>
118 * expr.c (operand, operator): Don't reject '++' and '--'.
120 2004-05-20 Richard Sandiford <rsandifo@redhat.com>
122 * config/tc-mips.c (append_insn): Use ISA-encoded addresses in MIPS16
125 2004-05-17 Adam Nemet <anemet@lnxw.com>
127 * configure.in: Add ppc-*-lynxos*. Update i386-*-lynxos* to ELF.
128 * configure: Regenerate.
130 2004-05-13 Paul Brook <paul@codesourcery.com>
132 * dw2gencfi.c (output_cie): Handle dwarf3 format CIE entries.
134 2004-05-13 Joel Sherrill <joel@oarcorp.com>
136 * configure.in (or32-*-rtems*): Switch to elf.
137 * configure: Regenerate.
139 2004-05-13 Nick Clifton <nickc@redhat.com>
141 * po/fr.po: Updated French translation.
143 2004-05-11 Nick Clifton <nickc@redhat.com>
145 * doc/as.texinfo (Section): Document G and T flags to .section
146 directive. Document the extra arguments that the G flag
147 requires. Document the #tls flag.
149 2004-05-11 H.J. Lu <hongjiu.lu@intel.com>
151 * subsegs.c (section_symbol): Create a new section symbol if
152 the existing one doesn't match.
153 * symbols.c (symbol_set_bfdsym): Don't reset BFD section symbol.
155 2004-05-07 Richard Sandiford <rsandifo@redhat.com>
157 * config/tc-mips.c (append_insn, mips_emit_delays): Extend -mfix-vr4120
158 to cope with VR4181A errata MD(1) and MD(4).
160 2004-05-07 Brian Ford <ford@vss.fsi.com>
162 * NEWS: Mention .secrel32 for pe[i]-i386.
164 2004-05-07 Alexandre Oliva <aoliva@redhat.com>
166 * config/tc-frv.h (MAX_MEM_FOR_RS_ALIGN_CODE): New.
169 2004-05-06 Daniel Jacobowitz <dan@debian.org>
171 * Makefile.am (DIST_SUBDIRS): Define.
172 * aclocal.m4: Regenerate with automake 1.8.4.
173 * Makefile.in: Likewise.
174 * doc/Makefile.in: Likewise.
176 2004-05-06 David Mosberger-Tang <davidm@hpl.hp.com>
178 * config/tc-ia64.c (dot_serialize): Declare.
179 (dot_serialize): New function.
180 (md_pseudo_table): Add ".serialize.data" and
181 ".serialize.instruction" directives.
183 2004-05-06 Nick Clifton <nickc@redhat.com>
185 * messages (as_internal_value_out_of_range): Print a message about
186 a value being out of range. Be consistent about whether the
187 values are printed in decimal or hexadecimal.
188 (as_warn_value_out_of_range): Generate a warning message about an
190 (as_bad_value_out_of_range): Generate an error message about an
192 * as.h: Prototype the new functions.
193 * config/tc-alpha.c (insert_operand): Use new function.
194 * config/tc-arc.c (arc_insert_operand): Likewise.
195 * config/tc-mn10200.c (mn10200_insert_operand): Likewise.
196 * config/tc-mn10300.c (mn10300_insert_operand): Likewise.
197 * config/tc-ppc.c (ppc_insert_operand): Likewise.
198 * config/tc-s390.c (s390_insert_operand): Likewise.
199 * config/tc-v850.c (v850_insert_operand): Likewise.
201 2004-05-05 Alexandre Oliva <aoliva@redhat.com>
203 * configure.in: Set em=linux for frv-*-*linux*.
204 * configure: Rebuilt.
205 * config/tc-frv.h (TARGET_FORMAT): Use elf32-frvfdpic if...
206 (frv_md_fdpic_enabled): New.
207 * config/tc-frv.c (frv_md_fdpic_enabled): New.
208 (DEFAULT_FDPIC): New.
209 (frv_flags): Use DEFAULT_FDPIC.
210 (frv_pic_flag): Likewise.
212 (md_longopts): Add -mnopic.
213 (md_parse_option): Handle it.
214 (md_show_usage): Add -mfdpic and -mnopic.
216 2004-05-05 Peter Barada <peter@the-baradas.com>
218 * config/tc-m68k.c: Add find_cf_chip to print list of valid
219 chips for invalid coldfire instructions, rename selectors
220 for ColdFire sub-variants, add 521x,5249,547x,548x and aliases,
221 add current_chip to track which chip is referred to(including save/restore),
222 use current_chip to select control registers, not current_arch.
223 (md_show_usage): Add new chips.
224 * doc/c-m68k.texi: Document new command line switches.
226 2004-05-05 Jakub Jelinek <jakub@redhat.com>
228 * tc-s390.h (md_do_align, HANDLE_ALIGN): Remove.
229 (NOP_OPCODE): Define.
230 (s390_align_code): Remove prototype.
231 * tc-s390.c (s390_align_code): Remove.
233 2004-05-04 H.J. Lu <hongjiu.lu@intel.com>
235 * config/tc-ia64.c (make_unw_section_name): Removed.
236 (start_unwind_section): New function.
237 (generate_unwind_image): Take const segT instead of const
239 (dot_handlerdata): Adjusted.
240 (dot_endp): Likewise.
242 2004-05-02 H.J. Lu <hongjiu.lu@intel.com>
244 * config/obj-elf.c (obj_elf_change_section): Allow the
245 ".note.GNU-stack" section has SHF_EXECINSTR.
247 2004-05-02 H.J. Lu <hongjiu.lu@intel.com>
249 * config/obj-elf.c (get_section): Return bfd_boolean.
250 (obj_elf_change_section): Call bfd_get_section_by_name_if
251 instead of bfd_map_over_sections.
253 2004-04-30 H.J. Lu <hongjiu.lu@intel.com>
255 * config/obj-elf.c (get_section): New function.
256 (obj_elf_change_section): Support multiple sections with same
259 2004-04-30 Nick Clifton <nickc@redhat.com>
261 * config/tc-arm.c (create_register_alias): Fix typo checking for
262 case sensitive register aliases.
263 (co_proc_number): Use error message string in all_reg_maps[]
265 (cp_reg_required_here): Likewise.
266 (fp_reg_required_here): Likewise.
268 2004-04-29 Brian Ford <ford@vss.fsi.com>
270 * dwarf2dbg.c (dwarf2_finish): Add SEC_DEBUGGING to section flags.
272 2004-04-28 Chris Demetriou <cgd@broadcom.com>
274 * config/tc-mips.c (HAVE_32BIT_ADDRESSES, append_insn, macro_build)
275 (load_address, macro, mips_ip, md_parse_option)
276 (mips_force_relocation, mips_validate_fix, md_apply_fix3)
277 (s_change_sec, pic_need_relax, tc_gen_reloc): Remove all
278 embedded-PIC handling, and update comments.
279 (SWITCH_TABLE): Remove.
280 * config/tc-mips.h (DIFF_EXPR_OK): Delete.
281 (enum mips_pic_level): Remove EMBEDDED_PIC.
282 (EXTERN_FORCE_RELOC): Remove embedded-PIC handling.
283 (TC_FORCE_RELOCATION): Update comment.
284 * ecoff.c (ecoff_build_lineno): Add comment about some code that
285 might be safe to remove now that MIPS embedded-PIC is gone.
287 2004-04-28 John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
289 * config/obj-som.c (obj_som_init_stab_section): Add new arguments in
290 call to obj_set_subsection_attributes.
291 (obj_som_init_stab_section): Likewise.
292 * config/tc-hppa.c (default_subspace_dict): Add comdat field.
293 (pa_def_subspaces): Provide comdat default.
294 (pa_subspace): Handle new "comdat" parameter. Set SEC_LINK_ONCE and
295 not SEC_IS_COMMON if section is comdat, common or dup_common. Update
296 calls to create_new_subspace and update_subspace to pass comdat flag.
297 (create_new_subspace, update_subspace): Add new comdat argument. Use
298 it in calls to obj_set_subsection_attributes.
299 * doc/c-hppa.texi (.subspa, .nsubspa): Document new comdat parameter
300 and use of comdat, common and dup_comm parameters.
302 2004-04-26 H.J. Lu <hongjiu.lu@intel.com>
304 * config/obj-elf.c (obj_elf_change_section): Check if the old
305 group name is NULL before comparison.
307 2004-04-23 Chris Demetriou <cgd@broadcom.com>
309 * config/tc-mips.h (mips_dwarf2_addr_size): Prototype.
311 2004-04-23 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
313 * config/tc-mips.c (s_mipsset): Set default CPU type for .set mipsN.
315 2004-04-23 Chris Demetriou <cgd@broadcom.com>
317 * config/tc-mips.c (md_longopts): Remove -membedded-pic option.
318 (OPTION_MEMBEDDED_PIC): Remove.
319 (OPTION_TRAP, OPTION_BREAK, OPTION_EB, OPTION_EL)
320 (OPTION_FP32, OPTION_GP32, OPTION_CONSTRUCT_FLOATS)
321 (OPTION_NO_CONSTRUCT_FLOATS, OPTIONS_FP64, OPTION_GP64)
322 (OPTION_RELAX_BRANCH, OPTION_NO_RELAX_BRANCH)
323 (OPTION_ELF_BASE): Renumber.
324 (md_parse_option): Remove OPTION_MEMBEDDED_PIC handling.
325 (md_show_usage): Remove mention of -membedded-pic.
326 * doc/as.texinfo: Remove mention of -membedded-pic.
328 2004-04-23 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
330 * config/tc-mips.h (USE_GLOBAL_POINTER_OPT): Remove.
331 * config/tc-mips.c (RDATA_SECTION_NAME, mips_target_format): Remove
333 (md_begin, mips_ip, md_parse_option, s_change_sec, s_option,
334 s_abicalls, nopic_need_relax, tc_gen_reloc): Remove uses of
335 USE_GLOBAL_POINTER_OPT.
337 2004-04-22 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
339 * config/tc-mips.c (macro): One more use of load_delay_nop.
341 2004-04-22 Atsushi Nemoto <anemo@mba.ocn.ne.jp>
343 * config/tc-mips.c (load_delay_nop): New function.
344 (load_address, macro): Use load_delay_nop() to build a nop
345 which can be omitted with gpr_interlocks.
347 2004-04-22 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
349 * config/tc-mips.c (hilo_interlocks, gpr_interlocks,
350 cop_interlocks): Remove superfluous CPU entries.
352 2004-04-22 Paul Brook <paul@codesourcery.com>
354 * config/tc-arm.c (mav_parse_offset): Value must be multiple of 4.
356 2004-04-22 Peter Barada <peter@the-baradas.com>
358 * NEWS: Added support for EMAC instructions and MAC/EMAC
360 * config/m68k-parse.h: Add ACC[123], ACCEXT{01,23}, MAC/EMAC
361 scale factor tokens, trailing_ampersand to mark mask addressing
362 for MAC/EMAC instructions.
363 * config/m68k-parse.y: Add options_ampersand clause, '<<',
365 (yylex): Handle '>', '<', and '&' following '+'.
366 * config/tc-m68k.c: Set mcfmac/mcfemac on appropriate ColdFire
367 architectures in archs[].
368 (m68k-ip): Add '4', 'e', 'g', 'i', cases to handle mask addressing
369 for MAC/EMAC instructions, ACC[0123], ACCEXT{01,23}, and '<<'/'>>'
371 (m68k_ip): Handle trailing '&' on MAC/EMAC insns.
372 (install_operand): Fix 'n' case, Add 'F', 'f', 'G', 'H', 'I', ']'
374 Add EMAC operands to init_table[].
376 2004-04-22 Bruno De Bus <bdebus@elis.ugent.be>
378 * config/tc-arm.h (enum mstate): Move here, add MAP_UNDEFINED
380 (TC_SEGMENT_INFO_TYPE): Define to enum mstate.
381 * config/tc-arm.c (enum mstate): Delete from here.
382 (mapping_state): Remove the static mapstate variable and instead
383 store the state in the segment. This allows a per-section mapping
384 state. Handle and ignore MAP_UNDEFINED states.
385 (arm_elf_change_section): Get the current mapping state from the
387 (s_ltorg): Set the mapping state to MAP_DATA.
388 (arm_cleanup): Use arm_elf_change_section to get the mapping state
389 for each pool as it is emitted.
391 2004-04-22 Nick Clifton <nickc@redhat.com>
393 * config/tc-arm.h: Formatting tidy ups.
395 2004-04-20 Chris Demetriou <cgd@broadcom.com>
397 * NEWS: Note that MIPS -membedded-pic option is deprecated.
399 2004-04-20 DJ Delorie <dj@redhat.com>
401 * config/tc-i386.h [TE_PE] (TC_CONS_FIX_NEW): Define.
402 * config/tc-i386.c (md_pseudo_table) [TE_PE]: Add "secrel32".
403 [TE_PE] (O_secrel): Define.
404 [TE_PE] (x86_pe_cons_fix_new): New.
405 [TE_PE] (pe_directive_secrel): Likewise.
406 (tc_gen_reloc) [TE_PE]: Support BFD_RELOC_32_SECREL.
408 2004-04-19 Eric Christopher <echristo@redhat.com>
410 * config/tc-mips.c (mips_dwarf2_addr_size): Revert part
411 of previous patch for fix in gcc.
413 2004-04-19 Jakub Jelinek <jakub@redhat.com>
415 * config/tc-xtensa.c (xg_assembler_literal): Fix a typo.
417 2004-04-19 Nathan Sidwell <nathan@codesourcery.com>
419 * read.c (do_align): Call md_flush_pending_output, if defined.
421 2004-04-16 Alan Modra <amodra@bigpond.net.au>
423 * expr.c (operand): Correct checks for ++ and --.
425 2004-04-14 H.J. Lu <hongjiu.lu@intel.com>
427 * config/tc-generic.c: Add some comments.
429 2004-04-14 Richard Sandiford <rsandifo@redhat.com>
431 * doc/c-mips.texi (-m{no-,}fix-vr4120): Renamed from
432 -{no-}mfix-vr4122-bugs.
433 * config/tc-mips.c (mips_fix_vr4120): Renamed from mips_fix_4122_bugs.
434 (append_insn, mips_emit_delays): Update accordingly.
435 (OPTION_FIX_VR4120, OPTION_NO_FIX_VR4120): Renamed from *VR4122.
436 (md_longopts): Change -{no-,}mfix-vr4122-bugs to -m{no-,}fix-vr4120.
437 (md_parse_option): Update after above changes.
438 (md_show_usage): Add -mfix-vr4120.
440 2004-04-13 Bob Wilson <bob.wilson@acm.org>
442 * doc/as.texinfo (Sub-Sections): Conditionalize COFF-specific use
443 of .section directive; add a reference to the ELF .subsection
446 2004-04-13 Kazuhiro Inaoka <inaoka.kazuhiro@renesas.com>
448 * config/tc-m32r.c (md_assemble): Fixed infinite loop bug
451 2004-04-11 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
453 * Makefile.am: Remove mips from aout targets.
454 * Makefile.in: Regenerate.
455 * configure.in: Remove mips-dec-bsd* target.
456 * configure: Regenerate.
458 2004-04-07 Alan Modra <amodra@bigpond.net.au>
461 * config/tc-ppc.c (ppc_elf_suffix): Add valid32 and valid64 fields
462 to struct map_bfd. Adjust MAP macro, and define MAP32, MAP64.
463 Update "mapping". Restrict some @ modifiers to 32 bit.
465 2004-04-01 Asgari Jinia <asgarij@kpitcummins.com>
466 Dhananjay Deshpande <dhananjayd@kpitcummins.com>
468 * config/tc-sh.c (dont_adjust_reloc_32): New variable.
469 (sh_fix_adjustable): Avoid adjusting BFD_RELOC_32 when
470 dont_adjust_reloc_32 is set.
471 (md_longopts): Add option -renesas.
472 (md_parse_option, md_show_usage): Likewise.
473 * doc/c-sh.texi: Likewise.
475 2004-04-01 Dave Korn <dk@artimi.com>
477 * config/tc-dlx.c (md_assemble): set fx_no_overflow flag for
478 hi16 and lo16 fixS structs.
479 (md_assemble): generate bit_fixS for RELOC_DLX_LO16 in
480 exactly the same way as for RELOC_DLX_REL16.
481 (machine_ip): properly respect LO flag in the_insn and
482 output RELOC_DLX_LO16 rather than RELOC_DLX_16.
483 (md_apply_fix3): apply RELOC_DLX_LO16.
485 2004-03-30 Stan Shebs <shebs@apple.com>
487 Remove long-obsolete MPW support.
488 * mpw-config.in, mpw-make.sed, mac-as.r: Remove files.
489 * configure.in: Remove mention of ppc-*-mpw* config.
490 * configure.in: Likewise.
492 2004-03-30 Nick Clifton <nickc@redhat.com>
494 * config/tc-arm.c (meabi_flags): Make its use conditional upon
495 OBJ_ELF being defined.
497 2004-03-27 Alan Modra <amodra@bigpond.net.au>
499 * config/obj-aout.c (obj_aout_type): Remove #ifdef BFD_ASSEMBLER code.
501 2004-03-23 Paul Brook <paul@codesourcery.com>
503 * config/tc-arm.c (meabi_flags): New variable.
504 (arm_parse_eabi): New function.
505 (md_begin): Set flags for EABI v3.
507 (arm_long_opts): Add meabi.
508 * doc/as.texinf <ARM>: Document -meabi.
509 * doc/c-arm.texi: Ditto.
511 2004-03-22 Bob Wilson <bob.wilson@acm.org>
513 * config/tc-xtensa.c (xtensa_post_relax_hook): Create literal
514 tables even when use_literal_section flag is not set.
516 2004-03-22 Alan Modra <amodra@bigpond.net.au>
518 * config/tc-sh.c: Remove trailing whitespace.
520 2004-03-22 Hans-Peter Nilsson <hp@axis.com>
522 * doc/c-cris.texi (CRIS-Opts): Document --no-mul-bug-abort,
523 --mul-bug-abort and the default behavior.
524 * config/tc-cris.c (cris_insn_kind): New member CRIS_INSN_MUL.
525 (err_for_dangerous_mul_placement): New variable.
526 (STATE_MUL, OPTION_MULBUG_ABORT_ON, OPTION_MULBUG_ABORT_OFF): New
528 (md_cris_relax_table): Have placeholder for STATE_MUL.
529 (md_longopts): New options --mul-bug-abort and --no-mul-bug-abort.
530 (cris_relax_frag) <case ENCODE_RELAX (STATE_MUL, STATE_BYTE)>: New
532 (md_estimate_size_before_relax) <case ENCODE_RELAX (STATE_MUL,
534 (md_convert_frag) <ENCODE_RELAX (STATE_MUL, STATE_BYTE)>: Check
535 alignment and position of this frag, emit error message if
537 (md_assemble): For a multiply insn and when checking it,
538 transform the current frag into a special frag for that purpose.
539 (md_parse_option) <case OPTION_MULBUG_ABORT_OFF, case
540 OPTION_MULBUG_ABORT_ON>: Handle new options.
542 2004-03-19 Bob Wilson <bob.wilson@acm.org>
544 * config/tc-xtensa.c (mark_literal_frags): New function.
545 (xtensa_move_literals): Call mark_literal_frags for all literal
546 segments, including init and fini literal segments.
547 (xtensa_post_relax_hook): Swap use of xt_insn_sec and xt_literal_sec.
549 2004-03-19 John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
551 * tc-hppa.c (cons_fix_new_hppa): Check for PC relative base type.
552 (pa_comm): Set BSF_OBJECT in symbol flags.
554 2004-03-19 Alan Modra <amodra@bigpond.net.au>
556 * Makefile.am: Run "make dep-am".
557 * Makefile.in: Regenerate.
558 * doc/Makefile.in: Regenerate.
559 * config.in: Regenerate.
560 * po/gas.pot: Regenerate.
562 2004-03-18 Nathan Sidwell <nathan@codesourcery.com>
564 * read.c (read_a_source_file): Use demand_empty_rest_of_line.
565 (demand_empty_rest_of_line): Issue an error here.
566 (ignore_rest_of_line): Silently skip to end.
567 (demand_copy_string): Issue an error, not warning.
569 * config/obj-elf.c (obj_elf_section_name): Likewise.
570 (obj_elf_section): Likewise.
571 * config/tc-arc.c (arc_extoper): Remove bogus NULL checks.
572 (arc_extinst): Likewise.
573 * config/tc-ia64.c (dot_saveb): Use demand_empty_rest_of_line.
574 (dot_spill): Likewise.
575 (dot_unwabi): Likewise.
576 (dot_prologue): Likewise.
578 * expr.c (operand): Reject ++ and --.
579 (operator): Likewise.
581 2004-03-17 Kaz Kojima <kkojima@rr.iij4u.or.jp>
583 * config/tc-sh.c: Include dw2gencfi.h.
584 (sh_cfi_frame_initial_instructions): New function.
585 (sh_regname_to_dw2regnum): Likewise.
586 * config/tc-sh.h (DWARF2_LINE_MIN_INSN_LENGTH): Move to the end of
588 (TARGET_USE_CFIPOP): Define.
589 (tc_cfi_frame_initial_instructions): Likewise.
590 (tc_regname_to_dw2regnum): Likewise.
591 (DWARF2_DEFAULT_RETURN_COLUMN, DWARF2_CIE_DATA_ALIGNMENT): Likewise.
592 * Makefile.am: Update dependencies.
593 * Makefile.in: Regenerate.
595 2004-03-17 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
597 * configure.in: Switch sh-*-rtems* to ELF. Add sh-*-rtemscoff*.
598 * configure: Regenerate.
600 2004-03-12 Bob Wilson <bob.wilson@acm.org>
602 * read.c (s_leb128): Call md_flush_pending_output.
604 2004-03-12 Michal Ludvig <mludvig@suse.cz>
606 * config/tc-i386.c (output_insn): Handle PadLock instructions.
607 * config/tc-i386.h (CpuPadLock): New define.
608 (CpuUnknownFlags): Added CpuPadLock.
610 2004-03-07 Andreas Schwab <schwab@suse.de>
612 * doc/c-hppa.texi (HPPA Directives): Fix typo.
614 2004-03-07 Richard Henderson <rth@redhat.com>
616 * dw2gencfi.c (output_cie): Align length to 4 byte boundary.
617 (cfi_finish): Likewise for fde.
619 2004-03-05 H.J. Lu <hongjiu.lu@intel.com>
621 * config/tc-ia64.c (md_assemble): Properly handle NULL
623 (ia64_handle_align): Don't abort if failed to add a stop bit.
625 2004-03-04 H.J. Lu <hongjiu.lu@intel.com>
627 * Makefile.in: Regenerated.
628 * aclocal.m4: Likewise.
629 * configure: Likewise.
630 * doc/Makefile.in: Likewise.
632 2004-03-03 H.J. Lu <hongjiu.lu@intel.com>
634 * config/tc-ia64.c (dot_align): New.
635 (ia64_do_align): Make it static.
636 (md_pseudo_table): Use "dot_align" for "align".
637 (ia64_md_do_align): Don't set align_frag here.
638 (ia64_handle_align): Add a stop bit to the previous bundle if
641 * config/tc-ia64.h (ia64_do_align): Removed.
643 2003-03-03 Andrew Stubbs <andrew.stubbs@superh.com>
645 * config/tc-sh.c (md_parse_option): Add -isa=sh4-nofpu and
646 -isa=sh4-nommu-nofpu options. Adjust help messages accordingly.
647 (sh_elf_final_processing): Output BFD type sh4_nofpu if that is
648 the most general type or the user specifically requested it.
649 (md_assemble): Add a new error message for when an instruction
650 is understood, but is not allowed due to an -isa option.
652 2004-03-02 H.J. Lu <hongjiu.lu@intel.com>
654 * config/tc-ia64.c (align_frag): New.
655 (md_assemble): Set the tc_frag_data field in align_frag for
656 IA64_OPCODE_FIRST instructions.
657 (ia64_md_do_align): Set align_frag.
658 (ia64_handle_align): Add a stop bit if needed.
660 * config/tc-ia64.h (TC_FRAG_TYPE): New.
663 2004-03-01 Richard Sandiford <rsandifo@redhat.com>
665 * config/tc-frv.c (fr400_audio): New variable.
666 (md_parse_option, md_show_usage): Add -mcpu=fr405 and -mcpu=fr450.
667 (md_parse_option): Set fr400_audio for -mcpu=fr400 and -mcpu=fr405.
668 (target_implements_insn_p): New function.
669 (md_assemble): Report an error if the processor doesn't implement
672 2004-02-27 Kazuhiro Inaoka <inaoka.kazuhiro@renesas.com>
674 * config/tc-m32r.c (md_longopts): Added -no-bitinst option.
675 (md_parse_option): Ditto.
676 (OPTION_NO_SPECIAL_M32R): Added.
677 (md_show_usage): Document it.
678 (enable_speial_m32r): Changed a default value from 0 to 1.
679 * doc/c-m32r.texi: Document the -no-bitinst option.
681 2004-02-27 Nick Clifton <nickc@redhat.com>
683 * config/tc-sh.c (get_operand): Revert previous delta.
684 (tc_gen_reloc): Check for an unknown reloc type before processing
687 2004-02-27 Hannes Reinecke <hare@suse.de>
689 * config/tc-s390.c (s390_insn): Correct range check for opcode in
690 .insn pseudo operation.
692 2004-02-27 Anil Paranjpe <anilp1@kpitcummins.com>
694 * config/tc-sh.c (get_operand): In case of #Imm, check has been
695 added for wrong syntax.
697 2004-02-26 Eric Christopher <echristo@redhat.com>
699 * config/tc-mips.c (mips_dwarf2_addr_size): New.
700 * config/tc-mips.h (DWARF2_ADDR_SIZE): Use.
702 2004-02-26 Andrew Stubbs <andrew.stubbs@superh.com>
704 * config/tc-sh.c (build_Mytes): Add REG_N_D and REG_N_B01
705 nibble types to assembler.
707 2004-02-25 Fred Fish <fnf@redhat.com>
709 * config/tc-iq2000.c: Add missing \n\ in multiline string literal.
711 2004-02-20 James E Wilson <wilson@specifixinc.com>
713 * config/tc-ia64.c (slot_index): New arg before_relax. Use instead of
715 (fixup_unw_records): New arg before_relax. Pass to slot_index.
716 (ia64_estimate_size_before_relax): New.
717 (ia64_convert_frag): Pass 0 to fixup_unw_records. Add comment.
718 (generate_unwind_image): Pass 1 to fixup_unw_records.
719 * config/tc-ia64.h (ia64_estimate_size_before_relax): Declare.
720 (md_estimate_size_before_relax): Call ia64_estimate_size_before_relax.
722 2004-02-19 Jakub Jelinek <jakub@redhat.com>
724 * stabs.c (generate_asm_file): Avoid warning about use of
725 uninitialized variable.
727 2004-02-18 David Mosberger <davidm@hpl.hp.com>
729 * config/tc-ia64.c (ia64_flush_insns): In addition to prologue,
730 body, and endp, allow unwind records which do not have a "t"
731 (time/instruction) field.
733 2004-02-17 Petko Manolov <petkan@nucleusys.com>
735 * config/tc-arm.c (do_mav_dspsc_1): Correct offset of CRn.
736 (do_mav_dspsc_2): Likewise.
737 Fix accumulator registers move opcodes.
739 2004-02-13 Hannes Reinecke <hare@suse.de>
740 Jakub Jelinek <jakub@redhat.com>
742 * dwarf2dbg.c (get_filenum): Do not read beyond allocated memory.
744 2004-02-10 Steve Ellcey <sje@cup.hp.com>
746 * config/tc-ia64.h (ia64_frob_symbol): New declaration.
747 (tc_frob_symbol): New macro definition.
748 * config/tc-ia64.c (ia64_frob_symbol): New routine.
750 2004-02-09 Daniel Jacobowitz <drow@mvista.com>
752 * config/tc-arm.c (md_begin): Mark .note.gnu.arm.ident as
755 2004-02-09 Nathan Sidwell <nathan@codesourcery.com>
757 * read.h (IGNORE_OPCODE_CASE): Do not define. Replace with ...
758 (TC_CASE_SENSITIVE): ... this.
759 * read.c: Replace IGNORE_OPCODE_CASE with TC_CASE_SENSITIVE.
760 * doc/internals.texi (TC_CASE_SENSITIVE): Document.
762 2004-02-06 James E Wilson <wilson@specifixinc.com>
764 * config/tc-ia64.c (dot_endp): Delete call to output_endp.
765 (generate_unwind_image): Re-add it here.
767 2004-02-06 Nathan Sidwell <nathan@codesourcery.com>
769 * dwarf2dbg.c (DWARF2_ADDR_SIZE): Remove trailing ';'
770 * read.h (SKIP_WHITESPACE): Turn into an expression.
771 * read.c (read_a_source_file): A pseudo is removed by having a
774 2004-02-05 James E Wilson <wilson@specifixinc.com>
776 * config/tc-ia64.c (output_endp): New.
777 (count_bits): Delete.
778 (ia64_flush_insns, process_one_record, optimize_unw_records): Handle
780 (fixup_unw_records): Handle endp unwind records. Delete code for
781 shortening prologue regions not followed by a body record.
782 (dot_endp): Call add_unwind_entry to emit endp unwind record.
783 * config/tc-ia64.h (unw_record_type): Add endp.
785 2004-02-03 James E Wilson <wilson@specifixinc.com>
787 * config/tc-ia64.c (ia64_convert_frag): Call md_number_to_chars to
788 fill padding bytes with zeroes.
789 (emit_one_bundle): New locals last_ptr, end_ptr. Rewrite code that
790 sets unwind_record slot_number and slot_frag fields.
792 2004-02-02 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
794 * config/tc-mips.c (add_got_offset_hilo): New function.
795 (macro): Use load_register() and add_got_offset_hilo() to load
796 constants instead of hardcoding code sequences throughout.
798 2004-01-28 H.J. Lu <hongjiu.lu@intel.com>
800 * config/tc-ia64.c (emit_one_bundle): Add proper indentation.
802 2004-01-26 Bernardo Innocenti <bernie@develer.com>
804 * config/tc-m68k.h (EXTERN_FORCE_RELOC): Handle m68k-uclinux specially,
806 * config/tc-m68k.c (RELAXABLE_SYMBOL): Use EXTERN_FORCE_RELOC instead
807 of hard-coded test for TARGET_OS=elf.
809 2004-01-24 Chris Demetriou <cgd@broadcom.com>
811 * config/tc-mips.c (hilo_interlocks): Change definition
812 so that MIPS32, MIPS64 and later ISAs are included, along with
813 the already-included machines. Update comments.
815 2004-01-23 Daniel Jacobowitz <drow@mvista.com>
817 * config/tc-arm.c (tc_gen_reloc): Improve error message for
818 undefined local labels.
820 2004-01-23 Richard Sandiford <rsandifo@redhat.com>
822 * config/tc-mips.c (load_address, macro): Update comments about
823 NewABI GP relaxation.
825 2004-01-23 Richard Sandiford <rsandifo@redhat.com>
827 * config/tc-mips.c (macro_build): Remove place and counter arguments.
828 (mips_build_lui, macro_build_ldst_constoffset): Likewise.
829 (mips16_macro_build, macro_build_jalr): Remove counter argument.
830 (set_at, load_register, load_address, move_register): Likewise.
831 (load_got_offset, add_got_offset): Likewise.
832 Update all calls and tidy accordingly.
834 2004-01-23 Richard Sandiford <rsandifo@redhat.com>
836 * config/tc-mips.c (RELAX_ENCODE): Remove WARN argument.
837 (RELAX_FIRST, RELAX_SECOND): Turn into 8-bit quantities.
838 (RELAX_USE_SECOND): Bump to 0x10000.
839 (RELAX_SECOND_LONGER, RELAX_NOMACRO, RELAX_DELAY_SLOT): New flags.
840 (mips_macro_warning): New variable.
841 (md_assemble): Wrap macro expansion in macro_start() and macro_end().
842 (s_cpload, s_cpsetup, s_cprestore, s_cpreturn): Likewise.
843 (relax_close_frag): Set mips_macro_warning.first_frag. Adjust use
845 (append_insn): Update mips_macro_warning.sizes.
846 (macro_start, macro_warning, macro_end): New functions.
847 (macro_build): Don't emit warnings here.
848 (macro_build_lui, md_estimate_size_before_relax): ...or here.
849 (md_convert_frag): Check for cases where one macro alternative
850 needs a warning and the other doesn't. Emit a warning if the
851 longer sequence was chosen.
853 2004-01-23 Richard Sandiford <rsandifo@redhat.com>
855 * config/tc-mips.h (tc_frag_data_type, TC_FRAG_TYPE): Remove.
856 * config/tc-mips.c (RELAX_ENCODE): Take three arguments: the size of
857 the first sequence, the size of the second sequence, and a flag
858 that says whether we should warn.
859 (RELAX_OLD, RELAX_NEW, RELAX_RELOC[123]): Delete.
860 (RELAX_FIRST, RELAX_SECOND): New.
861 (mips_relax): New variable.
862 (relax_close_frag, relax_start, relax_switch, relax_end): New fns.
863 (append_insn): Remove "place" argument. Use mips_relax.sequence
864 rather than "place" to check whether we're expanding the second
865 alternative of a relaxable macro. Remove redundant check for
866 branch relaxation. If generating a normal insn, and there
867 is not enough room in the current frag, call relax_close_frag()
868 to close it. Update mips_relax.sizes[]. Emit fixups for the
869 second version of a relaxable macro. Record the first relaxable
870 fixup in mips_relax. Remove tc_gen_reloc workaround.
871 (macro_build): Remove all uses of "place". Use mips_relax.sequence
872 in the same way as in append_insn.
873 (mips16_macro_build): Remove "place" argument.
874 (macro_build_lui): As for macro_build. Don't drop the add_symbol
875 when generating the second version of a relaxable macro.
876 (load_got_offset, add_got_offset): New functions.
877 (load_address, macro): Use new relaxation machinery. Remove
878 tc_gen_reloc workarounds.
879 (md_estimate_size_before_relax): Set RELAX_USE_SECOND if the second
880 version of a relaxable macro is needed. Return -RELAX_SECOND if the
881 first version is needed.
882 (tc_gen_reloc): Remove relaxation handling.
883 (md_convert_frag): Go through the fixups for a relaxable macro and
884 mark those that belong to the unneeded alternative as done. If the
885 second alternative is needed, adjust the fixup addresses to account
886 for the deleted first alternative.
888 2004-01-23 Richard Sandiford <rsandifo@redhat.com>
890 * frags.h (frag_room): Declare.
891 * frags.c (frag_room): New function.
892 * doc/internals.texi: Document it.
894 2004-01-22 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
896 * config/tc-mips.c (append_insn): Don't do r3900 interlock
897 optimization for -mtune=r3900, as this will break on other CPUs.
899 2004-01-11 Tom Rix <tcrix@worldnet.att.net>
901 * config/tc-m68hc11.c (build_indexed_byte): movb and movw cannot
902 be relaxed, use fixup.
903 (md_apply_fix3): Use 5 bit reloc from movb and movw fixup.
905 2004-01-19 Jakub Jelinek <jakub@redhat.com>
907 * config/tc-sparc.c (sparc_ip): Disallow %f32-%f63 for single
910 2004-01-14 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
912 * config/tc-mips.c (append_insn): Properly detect variant frags
913 that preclude swapping of relaxed branches. Correctly swap
914 instructions between frags when dealing with relaxed branches.
916 2004-01-14 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
918 * acinclude.m4: Quote names of macros to be defined by AC_DEFUN
920 * aclocal.m4: Regenerate.
921 * configure: Regenerate.
923 2004-01-12 Anil Paranjpe <anilp1@KPITCummins.com>
925 * config/tc-h8300.c (build_bytes): Apply relaxation to bit
928 2004-01-12 Richard Sandiford <rsandifo@redhat.com>
930 * config/tc-mips.c (macro_build_jalr): When adding an R_MIPS_JALR
931 reloc, reserve space for the delay slot as well as the jalr itself.
933 2004-01-09 Paul Brook <paul@codesourcery.com>
935 * config/tc-arm.c (do_vfp_reg2_from_sp2): Rename from do_vfp_sp_reg2.
936 (do_vfp_sp2_from_reg2): New function.
938 (do_vfp_dp_from_reg2): Check return values properly.
940 2004-01-08 Ian Lance Taylor <ian@wasabisystems.com>
942 * config/tc-mips.c (warn_nops): Remove static variable.
943 (macro): Remove test of warn_nops.
944 (md_shortops): Remove 'n'.
945 (md_parse_option): Remove 'n' case.
946 (md_show_usage): Remove -n.
947 * doc/as.texinfo (Overview): Remove MIPS -n option.
948 * doc/c-mips.texi (MIPS Opts): Remove mention -n.
949 * NEWS: Mention removal of MIPS -n option.
951 * config/tc-mips.c (ISA_HAS_COPROC_DELAYS): Remove.
952 (cop_interlocks): Check ISA level.
953 (cop_mem_interlocks): Define.
954 (reg_needs_delay): Check cop_interlocks rather than
955 ISA_HAS_COPROC_DELAYS.
956 (append_insn): Likewise. Use cop_mem_interlocks rather than
957 directly checking mips_opts.isa.
958 (mips_emit_delays): Likewise.
960 2004-01-07 H.J. Lu <hongjiu.lu@intel.com>
962 * config/tc-ia64.c (unwind): Move next_slot_number and
963 next_slot_frag to ...
964 (unw_rec_list): Here.
965 (free_list_records): Removed.
966 (output_unw_records): Likewise.
967 (generate_unwind_image): Make it void.
968 (alloc_record): Initialize next_slot_number and next_slot_frag.
969 (slot_index): Take .org, .space and .align into account.
970 (fixup_unw_records): Don't set slot_number to 0. Use
971 list->next_slot_number and list->next_slot_frag instead of
972 unwind.next_slot_number and unwind.next_slot_frag.
973 (ia64_convert_frag): New.
974 (generate_unwind_image): Generate a rs_machine_dependent frag
976 (emit_one_bundle): Use list->next_slot_number and
977 list->next_slot_frag instead of unwind.next_slot_number and
978 unwind.next_slot_frag.
980 * config/tc-ia64.h (md_convert_frag): Defined as
982 (md_estimate_size_before_relax): Defined as (f)->fr_var.
984 2004-01-06 Alexandre Oliva <aoliva@redhat.com>
986 2003-12-19 Alexandre Oliva <aoliva@redhat.com>
987 * config/tc-frv.h (md_apply_fix3): Don't define.
988 * config/tc-frv.c (md_apply_fix3): New. Shift/truncate %hi/%lo
990 * config/tc-frv.h (TC_FORCE_RELOCATION_SUB_LOCAL): Define.
991 2003-10-07 Alexandre Oliva <aoliva@redhat.com>
992 * config/tc-frv.c (line_separator_chars): Add `!'.
993 2003-09-19 Alexandre Oliva <aoliva@redhat.com>
994 * config/tc-frv.c (md_assemble): Clear insn upfront.
995 2003-09-18 Alexandre Oliva <aoliva@redhat.com>
996 * config/tc-frv.c (OPTION_FDPIC): New macro.
997 (md_longopts): Add mfdpic.
998 (md_parse_option): Handle it.
999 2003-08-04 Alexandre Oliva <aoliva@redhat.com>
1000 * config/tc-frv.c (md_cgen_lookup_reloc) <FRV_OPERAND_D12,
1001 FRV_OPERAND_S12>: Use reloc type encoded in fix-up.
1002 (frv_pic_ptr): Parse funcdesc.
1004 2004-01-05 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
1006 * doc/as.texinfo: Let texi2pod parse asconfig.texi and
1007 gasver.texi. Remove duplicate symbol definitions for texi2pod.
1009 2004-01-05 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
1011 * Makefile.am (Makefile): Move the dependency on
1012 $(BFDDIR)/configure.in to...
1013 (CONFIG_STATUS_DEPENDENCIES): ... here.
1014 (AUTOMAKE_OPTIONS): Require automake 1.8.
1015 * Makefile.in: Regenerate.
1016 * doc/Makefile.am (BASEDIR, BFDDIR): Define.
1017 (CONFIG_STATUS_DEPENDENCIES): Add a dependency on
1018 $(BFDDIR)/configure.in here as well.
1019 * doc/Makefile.in: Regenerate.
1021 2004-01-05 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
1023 * Makefile.am (install, install-info, RECURSIVE_TARGETS): Remove.
1024 * Makefile.in: Regenerate.
1025 * aclocal.m4: Regenerate.
1026 * doc/Makefile.am (install, install-info): Remove.
1027 (install-data-local): A new hook for install-info.
1028 (AUTOMAKE_OPTIONS): Require automake 1.8.
1029 * doc/Makefile.in: Regenerate.
1031 2004-01-02 Nutan Singh <nutan@kpitcummins.com>
1033 * doc/c-sh.texi: Update description about floating point behavior
1036 2004-01-02 Bernardo Innocenti <bernie@develer.com>
1038 * configure.in: Add m68k-uClinux target.
1039 * configure: Regenerate.
1041 For older changes see ChangeLog-0203
1047 version-control: never