1 2007-06-11 Sterling Augustine <sterling@tensilica.com>
2 Bob Wilson <bob.wilson@acm.org>
4 * config/tc-xtensa.c (XTENSA_PROP_INSN_NO_TRANSFORM): Renamed to...
5 (XTENSA_PROP_NO_TRANSFORM): ...this.
6 (frag_flags_struct): Move is_no_transform out of the insn sub-struct.
7 (xtensa_mark_frags_for_org): New.
8 (xtensa_handle_align): Set RELAX_ORG frag subtype for rs_org.
9 (xtensa_post_relax_hook): Call xtensa_mark_frags_for_org.
10 (get_frag_property_flags): Adjust reference to is_no_transform flag.
11 (xtensa_frag_flags_combinable): Likewise.
12 (frag_flags_to_number): Likewise. Use XTENSA_PROP_NO_TRANSFORM.
13 * config/tc-xtensa.h (xtensa_relax_statesE): Add RELAX_ORG.
15 2007-06-06 Paul Brook <paul@codesourcery.com>
17 * config/tc-arm.c (s_align): Pad code sections appropriately.
19 2007-06-05 Paul Brook <paul@codesourcery.com>
21 * config/tc-arm.c (insns): Correct Thumb-2 ldrd/strd opcodes.
23 2007-06-05 Nick Clifton <nickc@redhat.com>
26 * config/tc-sparc.c (sparc_ip): Terminate tls_ops array.
28 2007-06-05 Alan Modra <amodra@bigpond.net.au>
30 * config/tc-spu.c (spu_cons): Use deferred_expression. Handle
32 (tc_gen_reloc): Abort if neither addsy or subsy is set.
33 (md_apply_fix): Don't attempt to resolve SPU_PPU relocs.
34 * config/tc-spu.h (md_operand): Handle @ppu without sym.
36 2007-05-31 Paul Brook <paul@codesourcery.com>
38 * config/tc-arm.c (insns): Allow strex on M profile cores.
40 2007-05-29 David S. Miller <davem@davemloft.net>
41 Jakub Jelinek <jakub@redhat.com>
44 * config/tc-sparc.c (md_apply_fix): Fix relocation overflow checks
45 for BFD_RELOC_SPARC_WDISP16 and BFD_RELOC_SPARC_WDISP19.
47 2007-05-29 Alan Modra <amodra@bigpond.net.au>
49 * config/tc-spu.h: Wrap in #ifndef/#endif. Delete coff macros.
51 2007-05-29 Alan Modra <amodra@bigpond.net.au>
53 * config/tc-ppc.c: Convert to ISO C.
54 * config/tc-ppc.c: Likewise.
56 2007-05-29 Alan Modra <amodra@bigpond.net.au>
58 * write.h (EXEC_MACHINE_TYPE): Delete.
59 (string_byte_count, section_alignment): Delete.
61 2007-05-28 Nathan Sidwell <nathan@codesourcery.com>
63 * app.c (do_scrub_chars): Cope with \ at end of buffer.
65 2007-05-26 Alan Modra <amodra@bigpond.net.au>
67 * config/tc-ppc.c (ppc_insert_operand): Truncate sign bits in
68 top 32 bits of 64 bit value if so doing results in passing
69 range check. Rewrite sign extension fudges similarly. Enable
70 fudges for powerpc64 too. Report user value if range check
71 fails rather than fudged value. Negate PPC_OPERAND_NEGATIVE
72 range rather than value, also to report user value on failure.
74 2007-03-25 Paul Brook <paul@codesourcery.com>
76 * config/tc-arm.c (T2_SUBS_PC_LR): Define.
77 (do_t_add_sub): Correctly encode subs pc, lr, #const.
78 (do_t_mov_cmp): Correctly encode movs pc, lr.
80 2007-05-24 Steve Ellcey <sje@cup.hp.com>
82 * Makefile.in: Regnerate.
83 * configure: Regenerate.
84 * aclocal.m4: Regenerate.
85 * doc/Makefile.in: Regenerate.
87 2007-05-22 Bob Wilson <bob.wilson@acm.org>
89 * doc/c-xtensa.texi (Xtensa Automatic Alignment): Remove statements
90 and index entries about automatic alignment of ENTRY instructions.
92 2007-05-22 Nick Clifton <nickc@redhat.com>
94 * doc/as.texinfo: Use @copying around the copyright notice.
96 2007-05-18 Joseph Myers <joseph@codesourcery.com>
98 * config/tc-mips.c (s_mipsset): Use generic s_set for directives
101 2007-05-17 H.J. Lu <hongjiu.lu@intel.com>
104 2003-06-05 Michal Ludvig <mludvig@suse.cz>
105 * doc/as.texinfo: Document new directives: .cfi_restore,
106 .cfi_undefined, .cfi_same_value, .cfi_return_column,
107 .cfi_remember_state and .cfi_restore_state.
109 2007-05-17 Nathan Sidwell <nathan@codesourcery.com>
111 * config/tc-m68k.c (md_apply_fix): Show value of out of range
112 fixups in error message.
113 (md_conver_frag_1): Propagate the fix source location and use
114 as_bad_where rather than fatal, for better error messages.
116 2007-05-16 Paul Brook <paul@codesourcery.com>
118 * config/tc-arm.c (v7m_psrs): Add uppercase PSR names and xpsr.
120 2007-05-15 Mark Shinwell <shinwell@codesourcery.com>
122 * app.c (do_scrub_chars): Don't damage \@ pseudo-variables.
124 2007-05-15 Vincent Riviere <vincent.riviere@freesbee.fr>
127 * config/tc-m68k.c (relaxable_symbol): Make sure that the correct
128 addend is stored for relocs against weak symbols.
129 (md_apply_fix): So not loose track of addend for relocs against
132 2007-05-14 Thiemo Seufer <ths@mips.com>
134 * config/tc-mips.c (md_parse_option): Fix parsing of -O option.
136 2007-05-14 Mei Ligang <ligang@sunnorth.com.cn>
138 * config/tc-score.c (data_op2, validate_immediate): Fix bug for
139 addri, addri.c, subi, and subi.c when immediate number is hex.
140 (score_insns): Remove subis and subis.c.
141 (do_sub_rdi16): Delete.
143 2007-05-11 Alan Modra <amodra@bigpond.net.au>
145 * config/tc-spu.c (md_pseudo_table): Add int, long, quad. Call
147 (md_assemble): Tidy use of insn.flag.
148 (get_imm): Likewise. Handle uppercase input too.
149 (spu_cons): New function.
150 * config/tc-spu.h (tc_fix_adjustable): Don't adjust SPU_PPU relocs.
151 (TC_FORCE_RELOCATION): Don't resolve them either.
153 2007-05-05 Mark Shinwell <shinwell@codesourcery.com>
155 * config/tc-arm.c (md_apply_fix): Generate more accurate
156 diagnostic when 8-bit immediate range is exceeded for
157 BFD_RELOC_ARM_OFFSET_IMM8.
159 2007-05-04 Alan Modra <amodra@bigpond.net.au>
162 * config/tc-i386.c (lex_got): Don't replace the reloc token with
163 a space if we already have a space.
165 2007-05-03 H.J. Lu <hongjiu.lu@intel.com>
167 * config/tc-i386.c (match_template): Don't explicitly check
168 suffix for crc32 in Intel mode.
169 (process_suffix): Issue an error for crc32 if the operand size
172 2007-05-03 Vincent Riviere <vincent.riviere@freesbee.fr>
173 Nick Clifton <nickc@redhat.com>
176 * config/tc-m68k.c (relaxable_symbol): Do not relax weak symbols.
177 (tc_gen_reloc): Adjust the addend of relocs against weak symbols.
178 (md_apply_fix): Put zero values into the frags referencing weak
181 2007-05-02 Alan Modra <amodra@bigpond.net.au>
184 * config/tc-ppc.c (ppc_insert_operand): Don't increase min for
187 2007-05-01 H.J. Lu <hongjiu.lu@intel.com>
189 * config/tc-i386.c (match_template): Check suffix for crc32 in
191 (process_suffix): Default the suffix of 8bit crc32 to
193 (check_byte_reg): Skip check for 8bit crc32.
195 2007-04-30 H.J. Lu <hongjiu.lu@intel.com>
197 * config/tc-i386.c (md_assemble): Use register_prefix in
198 error/warning message.
199 (check_byte_reg): Likewise.
200 (check_long_reg): Likewise.
201 (check_qword_reg): Likewise.
202 (check_word_reg): Likewise.
203 (process_operands): Likewise.
205 2007-04-30 Alan Modra <amodra@bigpond.net.au>
208 * config/tc-ppc.c (ppc_insert_operand): Disable range check if
211 2007-04-28 Thiemo Seufer <ths@networkno.de>
213 * config/tc-mips.c: Fix comment.
215 2007-04-26 Anatoly Sokolov <aesok@post.ru>
217 * config/tc-avr.c (mcu_types): Add support for atmega8hva and
218 atmega16hva devices. Move at90usb82 device to 'avr5' architecture.
219 * doc/c-avr.texi: Document new devices.
221 2007-04-24 Alan Modra <amodra@bigpond.net.au>
223 * Makefile.am: Run "make dep-am".
224 * Makefile.in: Regenerate.
226 2007-04-23 Nathan Sidwell <nathan@codesourcery.com>
228 * config/tc-m68k.c (mcf54455_ctrl): New.
229 (HAVE_LONG_DISP, HAVE_LONG_CALL, HAVE_LONG_COND): New.
230 (m68k_archs): Add isac.
231 (m68k_cpus): Add 54455 family.
232 (m68k_ip): Split Bg into Bb, Bs, Bg.
233 (m68k_elf_final_processing): Add ISA_C.
234 * doc/c-m68k.texi (M680x0 Options): Add isac.
236 2007-04-22 Alan Modra <amodra@bigpond.net.au>
238 * read.c (read_a_source_file): Skip multiple spaces to
239 cover hack in mmix md_start_line_hook which overwrites a
240 colon with a space. Delete sermon and needless assertion.
242 2007-04-21 Alan Modra <amodra@bigpond.net.au>
244 * config/atof-vax.c (atof_vax_sizeof): Change return type to unsigned.
245 (md_atof): Make number_of_chars unsigned. Revert last change.
246 * config/tc-or32.c (md_apply_fix): Delete bogus assertions.
247 * config/tc-sh.c (sh_optimize_expr): Only define for OBJ_ELF.
248 * config/tc-sh.h (md_optimize_expr): Likewise.
249 * config/tc-sh64.c (shmedia_md_pcrel_from_section): Delete bogus
251 * config/tc-xtensa.c (convert_frag_immed_finish_loop): Likewise.
253 2007-04-21 Nick Clifton <nickc@redhat.com>
255 * config/atof-vax.c (md_atof): Fix comparison inside know().
257 * config/tc-ia64.c (emit_one_bundle): Fix typo.
259 2007-04-21 Alan Modra <amodra@bigpond.net.au>
261 * expr.c (expr): Assert on rankarg, not rank which can be unsigned.
262 * read.c (read_a_source_file): Remove buffer_limit[-1] assertion.
263 Don't skip over NUL char.
264 (pseudo_set): Set X_op for registers to O_register.
265 * symbols.c (symbol_clone): Remove assertion that sym is defined.
266 (resolve_symbol_value): Resolve O_register symbols.
267 * config/tc-i386.c (parse_real_register): Don't use i386_float_regtab.
268 Instead find st(0) by hash lookup.
269 * config/tc-ppc.c (ppc_macro): Warning fix.
271 * as.h (ENABLE_CHECKING): Default define to 0.
272 (know): Assert if ENABLE_CHECKING.
273 (struct relax_type): Remove superfluous declaration.
274 * configure.in (--enable-checking): New.
275 * configure: Regenerate.
276 * config.in: Regenerate.
277 * config/tc-ppc.c (ppc_setup_opcodes): Do checks when ENABLE_CHECKING.
278 Check for duplicate powerpc_operands entries.
280 2007-04-20 Nathan Sidwell <nathan@codesourcery.com>
282 * config/tc-m68k.c (mcf5253_ctrl): New.
283 (mcf52223_ctrl): New.
284 (m68k_cpus): Add 5253, 52221, 52223.
286 * config/m68k-parse.h (RAMBAR_ALT): New.
287 * config/tc-m68k.c (mcf5206_ctrl, mcf5307_ctrl): New.
288 (mcf_ctrl, mcf5208_ctrl, mcf5210a_ctrl, mcf5213_ctrl, mcf52235_ctrl,
289 mcf5225_ctrl, mcf5235_ctrl, mcf5271_ctrl, mcf5275_ctrl,
290 mcf5282_ctrl, mcf5329_ctrl, mcf5373_ctrl, mcfv4e_ctrl,
291 mcf5475_ctrl, mcf5485_ctrl): Add RAMBAR synonym for
293 (mcf5272_ctrl): Add RAMBAR0, replace add RAMBAR with RAMBAR_ALT.
294 (m68k_cpus): Adjust 5206, 5206e & 5307 entries.
295 (m68k_ip) <Case J>: Detect when RAMBAR_ALT should be used. Add it
296 to control register mapping.
298 2007-04-20 Alan Modra <amodra@bigpond.net.au>
300 * messages.c (as_internal_value_out_of_range): Fix typo in
301 error message. Return after printing domain error.
302 * config/tc-ppc.c (ppc_insert_operand): Preserve low zero bits
303 in max when shifting right.
305 2007-04-20 Alan Modra <amodra@bigpond.net.au>
307 * messages.c (as_internal_value_out_of_range): Extend to report
308 errors for values with invalid low bits set.
309 * config/tc-ppc.c (ppc_setup_opcodes): Check powerpc_operands bitm
310 fields. Check that operands and opcode fields are disjoint.
311 (ppc_insert_operand): Check operands using mask rather than bit
312 count. Check low bits too. Handle PPC_OPERAND_PLUS1. Adjust
314 (md_apply_fix): Adjust for struct powerpc_operand change.
316 2007-04-19 Paul Brook <paul@codesourcery.com>
318 * config/tc-arm.c (md_assemble): Only allow 16-bit instructions on
319 Thumb-1. Add sanity check for bogus relaxations.
321 2007-04-19 Paul Brook <paul@codesourcery.com>
323 * config/tc-arm.c (insns): Allow rsb and rsbs on Thumb-1.
325 2007-04-19 Alan Modra <amodra@bigpond.net.au>
327 * Makefile.am: Run "make dep-am".
328 * Makefile.in: Regenerate.
330 2007-04-19 Nathan Froyd <froydnj@codesourcery.com>
332 * doc/c-ppc.texi (PowerPC-Opts): Document -me500, -me500x2, -mspe.
334 2007-04-18 H.J. Lu <hongjiu.lu@intel.com>
336 * doc/c-i386.texi; Document .ssse3, .sse4.1, .sse4.2 and .sse4.
338 2007-04-18 H.J. Lu <hongjiu.lu@intel.com>
340 * config/tc-i386.c (cpu_arch): Add .sse4.2 and .sse4.
341 (match_template): Handle operand size for crc32 in SSE4.2.
342 (process_suffix): Handle operand type for crc32 in SSE4.2.
343 (output_insn): Support SSE4.2.
345 2007-04-18 H.J. Lu <hongjiu.lu@intel.com>
347 * config/tc-i386.c (cpu_arch): Add .sse4.1.
348 (process_operands): Adjust implicit operand for blendvpd,
349 blendvps and pblendvb in SSE4.1.
350 (output_insn): Support SSE4.1.
352 2007-04-18 Paul Brook <paul@codesourcery.com>
354 * config/tc-arm.c (do_t_rsb): Use 16-bit encoding when possible.
356 2007-04-16 Kaz Kojima <kkojima@rr.iij4u.or.jp>
358 * config/tc-sh.c (sh_handle_align): Call as_bad_where instead
359 of as_warn_where for misaligned data.
361 2007-04-15 Kaz Kojima <kkojima@rr.iij4u.or.jp>
363 * config/tc-sh.c (align_test_frag_offset_fixed_p): Handle
366 2007-04-14 Steve Ellcey <sje@cup.hp.com>
368 * Makefile.am: Add ACLOCAL_AMFLAGS.
369 * Makefile.in: Regenerate.
371 2007-04-14 Kaz Kojima <kkojima@rr.iij4u.or.jp>
373 * config/tc-sh.c (align_test_frag_offset_fixed_p): New.
374 (sh_optimize_expr): Likewise.
375 * config/tc-sh.h (md_optimize_expr): Define.
376 (sh_optimize_expr): Prototype.
378 2007-04-06 Matt Thomas <matt@netbsd.org>
380 * config/tc-vax.c (vax_cons): Added to support %pcrel{8,16,32}(exp)
381 to emit pcrel relocations by DWARF2 in non-code sections. Borrowed
382 heavily from tc-sparc.c. (vax_cons_fix_new): Likewise.
384 2007-04-04 Kazu Hirata <kazu@codesourcery.com>
386 * config/tc-m68k.c (HAVE_LONG_BRANCH): Add fido_a.
388 2007-04-04 Paul Brook <paul@codesourcery.com>
390 * config/tc-arm.c (do_neon_ext): Enforce immediate range.
391 (insns): Use I15 for vext.
393 2007-04-04 Paul Brook <paul@codesourcery.com>
395 * configure.tgt: Loosen checks for arm uclinux eabi targets.
397 2007-04-02 Sterling Augustine <sterling@tensilica.com>
399 * config/tc-xtensa.c (xtensa_flush_pending_output): Check
400 outputting_stabs_line_debug.
402 2007-03-26 Anatoly Sokolov <aesok@post.ru>
404 * config/tc-avr.c (mcu_types): Add support for at90pwm1, at90usb82,
405 at90usb162, atmega325p, atmega329p, atmega3250p and atmega3290p
407 * doc/c-avr.texi: Document new devices.
409 2007-04-02 Richard Sandiford <richard@codesourcery.com>
411 * doc/as.texinfo: Add -mvxworks-pic to the list of MIPS options.
412 * doc/c-mips.texi (-KPIC, -mvxworks-pic): Document.
413 * config/tc-mips.c (md_show_usage): Mention -mvxworks-pic.
415 2007-03-30 Sterling Augustine <sterling@tensilica.com>
416 Bob Wilson <bob.wilson@acm.org>
418 * config/tc-xtensa.c (xtensa_move_labels): Remove loops_ok argument.
419 Do not check is_loop_target flag.
420 (xtensa_frob_label): Adjust calls to xtensa_move_labels.
421 (xg_assemble_vliw_tokens): Likewise. Also avoid calling
422 xtensa_move_labels for alignment of loop opcodes.
424 2007-03-30 H.J. Lu <hongjiu.lu@intel.com>
426 * config/tc-i386.c (process_suffix): Reindent a bit.
428 2007-03-30 Paul Brook <paul@codesourcery.com>
430 * config/tc-arm.c (encode_thumb2_ldmstm): New function.
431 (do_t_ldmstm): Generate 16-bit push/pop. Use encode_thumb2_ldmstm.
432 (do_t_push_pop): Use encode_thumb2_ldmstm.
434 2007-03-29 DJ Delorie <dj@redhat.com>
436 * config/tc-m32c.c (rl_for, relaxable): Protect argument.
437 (md_relax_table): Add entries for ADJNZ macros.
438 (M32C_Macros): Add ADJNZ macros.
439 (subtype_mappings): Add entries for ADJNZ macros.
440 (insn_to_subtype): Check for adjnz and sbjnz insns.
441 (md_estimate_size_before_relax): Pass insn to insn_to_subtype.
442 (md_convert_frag): Convert adjnz and sbjnz.
444 2007-03-29 Nick Clifton <nickc@redhat.com>
446 * itbl-ops.c (itbl_entry): Remove unnecessary and excessively long
448 * itbl-ops.h (enum e_processor): Initialise the e_nprocs field
449 using ITBL_NUMBER_OF_PROCESSORS.
450 * itbl-parse.y (yyerror): Remove use of redundant macro PARAMS.
452 2007-03-28 H.J. Lu <hongjiu.lu@intel.com>
454 * config/tc-i386.c (build_modrm_byte): For instructions with 2
455 register operands, encode destination in i.rm.regmem if its
458 2007-03-28 Richard Sandiford <richard@codesourcery.com>
459 Phil Edwards <phil@codesourcery.com>
461 * doc/as.texinfo: Put the contents after the title page rather
462 than at the end of the document.
464 2007-03-27 Alan Modra <amodra@bigpond.net.au>
466 * NEWS: Mention ".reloc".
468 2007-03-26 Sterling Augustine <sterling@tensilica.com>
470 * config/tc-xtensa.c (xg_translate_idioms): Allow assembly idioms
471 in FLIX instructions.
473 2007-03-26 Julian Brown <julian@codesourcery.com>
475 * config/tc-arm.c (arm_it): Add immisfloat field.
476 (parse_qfloat_immediate): Disallow integer syntax for floating-point
477 immediates. Fix hex immediates, handle 0.0 and -0.0 specially.
478 (parse_neon_mov): Set immisfloat bit for operand if it parsed as a
480 (neon_cmode_for_move_imm): Reject non-float immediates for float
482 (neon_move_immediate): Pass immisfloat bit to neon_cmode_for_move_imm.
484 2007-03-26 Julian Brown <julian@codesourcery.com>
486 * doc/c-arm.texi: Add documentation for .dn/.qn directives.
488 2007-03-26 Alan Modra <amodra@bigpond.net.au>
490 * doc/as.texinfo (Reloc): Document.
491 * read.c (potable): Add "reloc".
492 (s_reloc): New function.
493 * write.c (reloc_list): New global var.
494 (resolve_reloc_expr_symbols): New function.
495 (write_object_file): Call it.
496 (write_relocs): Process reloc_list.
497 * write.h (struct reloc_list): New.
498 (reloc_list): Declare.
500 2007-03-24 Paul Brook <paul@codesourcery.com>
502 * config/tc-arm.c (do_t_ldmstm): Error on Thumb-2 addressing modes.
504 2007-03-24 Paul Brook <paul@codesourcery.com>
505 Mark Shinwell <shinwell@codesourcery.com>
507 * config/tc-arm.c (operand_parse_code): Add OP_oRRw.
508 (parse_operands): Don't expect comma if first operand missing.
510 (do_srs): Encode register number, checking it is r13. Update comment.
511 (insns): Update SRS entries to take a register.
513 2007-03-23 H.J. Lu <hongjiu.lu@intel.com>
515 * config/tc-i386.c (md_begin): Allow '.' in mnemonic.
517 2007-03-23 Mark Shinwell <shinwell@codesourcery.com>
519 * config/tc-arm.c (md_apply_fix): Turn CBZ instructions that
520 attempt to jump to the next instruction into NOPs.
522 2007-03-23 Alan Modra <amodra@bigpond.net.au>
524 * config/tc-spu.c: Don't include opcode/spu.h.
525 (md_assemble): Set tc_fix_data.insn_tag and arg_format.
526 (md_apply_fix): Adjust.
527 * config/tc-spu.h: Include opcode/spu.h.
528 (struct tc_fix_info): New.
529 (TC_FIX_TYPE, TC_INIT_FIX_DATA): Adjust.
530 (TC_FORCE_RELOCATION): Define.
532 2007-03-22 Joseph Myers <joseph@codesourcery.com>
534 * doc/as.texinfo: Include VERSION_PACKAGE when reporting version.
536 2007-03-21 H.J. Lu <hongjiu.lu@intel.com>
538 * config/tc-i386.c (process_suffix): Check 0x90 instead of
539 xchg for xchg %rax,%rax.
541 2007-03-21 H.J. Lu <hongjiu.lu@intel.com>
543 * config/tc-i386.c: Replace REX_MODE64, REX_EXTX, REX_EXTY
544 and REX_EXTZ with REX_W, REX_R, REX_X and REX_B respectively.
546 2007-03-21 H.J. Lu <hongjiu.lu@intel.com>
549 * config/tc-i386.c (match_template): Properly handle 64bit mode
552 2007-03-21 Anton Ertl <anton@mips.complang.tuw>
555 * config/tc-alpha.c (emit_ustX): Fix ustq code generation.
557 2007-03-21 H.J. Lu <hongjiu.lu@intel.com>
559 * Makefile.am: Run dep-am.
560 * Makefile.in: Regenerated.
562 * config/tc-i386.c: Don't include "opcodes/i386-opc.h".
564 * config/tc-i386.h: Include "opcodes/i386-opc.h".
565 (NOP_OPCODE): Removed.
566 (template): Likewise.
568 2007-03-21 Andreas Schwab <schwab@suse.de>
570 * config/tc-i386.h (NOP_OPCODE): Restore.
572 2007-03-18 Mark Shinwell <shinwell@codesourcery.com>
574 * config/tc-arm.c (do_mul): Don't warn about overlapping
575 Rd and Rm operands when assembling for v6 or above.
576 Correctly capitalize register names in the messages.
577 (do_mlas): Likewise. Delete spurious blank line.
579 2007-03-16 Kazu Hirata <kazu@codesourcery.com>
581 * config/tc-m68k.c (m68k_cpus): Add an entry for fidoa.
583 2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
585 * config/tc-i386.c (md_begin): Use i386_regtab_size to scan
587 (parse_register): Use i386_regtab_size instead of ARRAY_SIZE
590 2007-03-15 Alexandre Oliva <aoliva@redhat.com>
593 * app.c (do_scrub_chars): PUT after setting states.
595 2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
597 * Makefile.am: Run "make dep-am".
598 * Makefile.in: Regenerated.
600 * config/tc-i386.c: Include "opcodes/i386-opc.h" instead of
602 (md_begin): Check reg_name != NULL for the last entry in
605 * config/tc-i386.h: Move many entries to opcode/i386.h and
608 * configure.in (need_opcodes): Set true for i386.
609 * configure: Regenerated.
611 2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
613 * Makefile.am (REPORT_BUGS_TO): Removed.
614 (INCLUDES): Remove -DREPORT_BUGS_TO.
615 * Makefile.in: Regenerated.
617 * configure.in (--with-bugurl): Removed.
618 * configure: Regenerated.
620 * doc/Makefile.am (as_TEXINFOS): Remove gasver.texi.
621 (AM_MAKEINFOFLAGS): Add -I ../../bfd/doc.
622 (TEXI2DVI): Likewise.
623 (gasver.texi): Removed.
624 (MOSTLYCLEANFILES): Remove gasver.texi.
625 (as.1): Don't depend on gasver.texi.
626 * doc/Makefile.in: Regenerated.
628 * doc/as.texi: Include bfdver.texi instead of gasver.texi.
630 2007-03-14 Daniel Jacobowitz <dan@codesourcery.com>
632 * config/tc-arm.c (arm_copy_symbol_attributes): New.
633 * config/tc-arm.h (arm_copy_symbol_attributes): Declare.
634 (TC_COPY_SYMBOL_ATTRIBUTES): Define.
635 * gas/symbols.c (copy_symbol_attributes): Use
636 TC_COPY_SYMBOL_ATTRIBUTES.
638 2007-03-14 Paul Brook <paul@codesourcery.com>
640 * config/tc-arm.c (T16_32_TAB): Fix dec_sp encoding.
642 2007-03-14 Alan Modra <amodra@bigpond.net.au>
645 * write.c (relax_segment): Insert extra alignment padding
646 to break infinite relax loop when given impossible
647 gcc_except_table assembly.
649 2007-03-12 H.J. Lu <hongjiu.lu@intel.com>
651 * config/tc-i386.c (md_assemble): Use Opcode_XXX instead of XXX
653 (match_template): Likewise.
654 (process_operands): Use ~0x3 mask to match MOV_AX_DISP32.
656 * config/tc-i386.h (Opcode_D): New.
657 (Opcode_FloatR): Likewise.
658 (Opcode_FloatD): Likewise.
665 2007-03-09 Alexandre Oliva <aoliva@redhat.com>
667 * app.c (do_scrub_chars): Recognize comments after # line "file".
668 * read.c (get_linefile_number): New.
669 (s_app_line): Accept ill-formed .linefile lines as comments.
671 2007-03-09 Alan Modra <amodra@bigpond.net.au>
673 * config/tc-i386.h (WORKING_DOT_WORD): Define.
675 2007-03-09 Alexandre Oliva <aoliva@redhat.com>
677 * app.c (do_scrub_chars): Turn #<line>"file"flags into .linefile.
678 * as.h (new_logical_line_flags): New.
679 * input-scrub.c (new_logical_line): Turned into wrapper for...
680 (new_logical_line_flags): this. Handle flags.
681 * read.c (potable): Add linefile. Adjust appline argument.
682 (s_app_file): Fake .appfiles no more.
683 (s_app_line): For .linefile, accept file name and flags.
685 2007-03-08 Alan Modra <amodra@bigpond.net.au>
687 * symbols.c (symbol_relc_make_sym): Comment typo fixes.
689 2007-03-08 Alan Modra <amodra@bigpond.net.au>
691 * Makefile.am: Run "make dep-am".
692 * Makefile.in: Regenerate.
693 * po/POTFILES.in: Regenerate.
695 2007-03-07 Joseph Myers <joseph@codesourcery.com>
697 * configure.in (REPORT_BUGS_TEXI): Define to Texinfo version of
699 * doc/Makefile.am (gasver.texi): Define BUGURL.
700 * doc/as.texinfo: Use BUGURL.
701 * Makefile.in, configure, doc/Makefile.in: Regenerate.
703 2007-03-06 Andreas Krebbel <krebbel1@de.ibm.com>
705 * config/tc-s390.c (md_parse_option): z9-ec option added.
707 2007-03-02 Paul Brook <paul@codesourcery.com>
709 * config/tc-arm.c (relax_immediate): Always return positive values.
710 (relaxed_symbol_addr): New function.
711 (relax_adr, relax_branch): Use it.
712 (arm_relax_frag): Pass strect argument. Adjust infinite loop check.
714 2007-03-01 Joseph Myers <joseph@codesourcery.com>
716 * as.c (parse_args): Update copyright date.
718 2007-02-28 Nathan Sidwell <nathan@codesourcery.com>
720 * configure.tgt (sh-*-uclinux, sh[12]-*-uclinux): Specify as elf.
722 2007-02-28 Nick Clifton <nickc@redhat.com>
725 * config/tc-d10v.c (do_assemble): Do not generate error messages,
726 just return -1 whenever a problem is encountered.
727 (md_assemble): If do_assemble returns -1 generate a non-fatal
728 error message and return.
731 * config/tc-msp430.c (line_separator_char): Change to '{'.
733 2007-02-27 Alan Modra <amodra@bigpond.net.au>
735 * config/tc-m68hc11.c (fixup24): Correct fixup size.
736 (build_jump_insn): Likewise.
737 (build_insn): Likewise.
738 (s_m68hc11_relax): Likewise.
740 2007-02-27 Alan Modra <amodra@bigpond.net.au>
742 * config/obj-elf.c (elf_frob_file): frag_wane any new frags.
744 2007-02-25 Mark Shinwell <shinwell@codesourcery.com>
746 * config/tc-arm.c (do_vfp_nsyn_pop): Use fldmias/fldmiad.
748 2007-02-23 Alan Modra <amodra@bigpond.net.au>
750 * config/tc-mn10300.c (md_convert_frag): Correct fixup size.
751 (md_assemble): Likewise.
753 2007-02-22 Alan Modra <amodra@bigpond.net.au>
755 * write.c (size_seg): Always clear SEC_RELOC here.
756 (install_reloc): New function, extracted from..
757 (write_relocs): ..here. Combine RELOC_EXPANSION_POSSIBLE code
758 with !RELOC_EXPANSION_POSSIBLE code. Don't add fr_offset when
759 testing frag size. Set SEC_RELOC here.
761 2007-02-21 Alan Modra <amodra@bigpond.net.au>
764 * config/tc-avr.h (TC_FX_SIZE_SLACK): Define.
766 2007-02-20 Thiemo Seufer <ths@mips.com>
768 * doc/c-mips.texi: Document 74kc, 74kf, 74kx.
770 2007-02-20 Thiemo Seufer <ths@mips.com>
772 * config/tc-mips.c (mips_cpu_info_table): Add 74K configurations.
774 2007-02-20 Thiemo Seufer <ths@mips.com>
775 Chao-Ying Fu <fu@mips.com>
777 * config/tc-mips.c (mips_set_options, mips_opts, file_ase_dspr2,
778 ISA_SUPPORTS_DSPR2_ASE, MIPS_CPU_ASE_DSPR2): Add DSP R2 ASE support.
779 (macro_build): Add case '2'.
780 (macro): Expand M_BALIGN to nop, packrl.ph or balign.
781 (validate_mips_insn): Add support for balign instruction.
782 (mips_ip): Handle DSP R2 instructions. Support balign instruction.
783 (OPTION_DSPR2, OPTION_NO_DSPR2, OPTION_COMPAT_ARCH_BASE,
784 md_parse_option, mips_after_parse_args): Add -mdspr2 and -mno-dspr2
785 command line options.
786 (s_mipsset): Add support for .set dspr2 and .set nodspr2 directives.
787 (md_show_usage): Add -mdspr2 and -mno-dspr2 help output.
788 * doc/c-mips.texi, doc/as.texinfo: Document -mdspr2, -mno-dspr2,
789 .set dspr2, .set nodspr2.
791 2007-02-20 Nathan Sidwell <nathan@codesourcery.com>
793 * config/tc-m68k.c (mcf5210a_ctrl, mcf52235_ctrl, mcf5225_ctrl): New.
794 (m68k_cpus): Add 5210a..5211a, 52230..52235 5224..5225.
796 2007-02-18 Alan Modra <amodra@bigpond.net.au>
798 * write.c (TC_FX_SIZE_SLACK): Define.
799 (write_relocs): Reinstate check for fixup within frag.
800 * config/tc-bfin.h (TC_FX_SIZE_SLACK): Define.
801 * config/tc-h8300.h (TC_FX_SIZE_SLACK): Define.
802 * config/tc-mmix.h (TC_FX_SIZE_SLACK): Define.
803 * config/tc-sh.h (TC_FX_SIZE_SLACK): Define.
804 * config/tc-xstormy16.h (TC_FX_SIZE_SLACK): Define.
806 2007-02-17 Mark Mitchell <mark@codesourcery.com>
807 Nathan Sidwell <nathan@codesourcery.com>
808 Vladimir Prus <vladimir@codesourcery.com
809 Joseph Myers <joseph@codesourcery.com>
811 * configure.in (--with-bugurl): New option.
812 * configure: Regenerate.
813 * dep-in.sed: Remove bin-bugs.h.
814 * Makefile.am (REPORT_BUGS_TO): Define.
815 (INCLUDES): Define REPORT_BUGS_TO.
816 (DEP_INCLUDES): Likewise.
817 ($(OBJS)): No longer depend on bin-bugs.h.
818 * Makefile.in: Regenerate.
819 * doc/Makefile.in: Regenerate.
820 * as.c (show_usage): Don't print empty REPORT_BUGS_TO.
821 * as.h: Remove include of bin-bugs.h.
823 2007-02-17 Alan Modra <amodra@bigpond.net.au>
825 * write.c: White space fixes.
826 (fixup_segment): Move symbol_mri_common_p adjustments..
827 (write_relocs): ..and symbol_equated_reloc_p adjustments..
828 (adjust_reloc_syms): ..to here.
830 2007-02-16 Alan Modra <amodra@bigpond.net.au>
832 * subsegs.c (subseg_change, subseg_get): Use xcalloc rather than
833 xmalloc, memset. Don't bother assigning NULL to known zero mem.
834 (subseg_set_rest): Remove unnecessary cast.
835 * write.c: Include libbfd.h. Replace PTR with void * throughout.
836 Remove unnecessary forward declarations and casts.
837 (set_symtab): Delete extern bfd_alloc.
838 (fixup_segment): Move.
840 2007-02-15 Nathan Sidwell <nathan@codesourcery.com>
842 * config/m68k-parse.h (m68k_register): Add ROMBAR0, ASID.
843 * config/tc-m68k.c (mcfv4e_ctrl): Add ColdFire specific names.
844 (mcf5475_ctrl, mcf5485_ctrl): New.
845 (m68k_cpus): Use mcf5485_ctrl and mcf5485_ctrl for those families.
846 (m68k_ip): Add ASID, MMUBAR, ROMBAR0 handling.
847 (init_table): Add asid, mmubar, adjust rombar0.
849 2007-02-14 Alan Modra <amodra@bigpond.net.au>
851 * config/tc-i386.h (Seg2ShortForm, Seg3ShortForm): Delete.
852 * config/tc-i386.c: Wrap overly long lines, whitespace fixes.
853 (process_operands): Move old Seg2ShortForm and Seg3ShortForm
854 code, and test for these insns using a combination of
855 opcode_modifier and operand_types.
857 2007-02-07 Paul Brook <paul@codesourcery.com>
859 * configure.tgt: Add arm*-*-uclinux-*eabi.
861 2007-02-05 Dave Brolley <brolley@redhat.com>
862 Richard Sandiford <rsandifo@redhat.com>
863 DJ Delorie <dj@redhat.com>
864 Stan Cox <scox@redhat.com>
865 Jim Blandy <jimb@redhat.com>
866 Nick Clifton <nickc@redhat.com>
867 Jim Wilson <wilson@redhat.com>
868 Frank Ch. Eigler <fche@redhat.com>
869 Graydon Hoare <graydon@redhat.com>
870 Ben Elliston <bje@redhat.com>
871 John Healy <jhealy@redhat.com>
872 Richard Henderson <rth@redhat.com>
874 * Makefile.am (CPU_TYPES): Add mep.
875 (TARGET_CPU_CFILES): Add tc-mep.c.
876 (TARGET_CPU_HFILES): Add tc-mep.h.
877 (DEPTC_mep_elf): New variable.
878 (DEPTC_mep_coff): Likewise.
879 (DEPOBJ_mep_coff, DEPOBJ_mep_elf, DEP_mep_coff, DEP_mep_elf): Likewise.
880 * configure.in: Support mep.
881 * configure.tgt: Likewise.
882 * config/tc-mep.c: New file.
883 * config/obj-elf.c: New file.
884 * config/tc-mep.c: New file.
885 * config/tc-mep.h: New file.
886 * testsuite/gas/mep: New testsuite with content.
887 * Makefile.in: Regenerate.
888 * configure: Regenerate.
890 2007-02-05 Dave Brolley <brolley@redhat.com>
892 * cgen.c (gas_cgen_install_complex_reloc): Removed.
893 (complex_reloc_installation_howto): Removed.
895 2007-02-05 Dave Brolley <brolley@redhat.com>
896 Graydon Hoare <graydon@redhat.com>
897 DJ Delorie <dj@redhat.com>
898 Catherine Moore <clm@redhat.com>
899 Michael Chastain <chastain@redhat.com>
900 Frank Ch. Eigler <fche@redhat.com>
902 * symbols.c (use_complex_relocs_for): New, to decide
903 when to use complex relocs. Add signed RELC support.
904 (resolve_symbol_value): Call use_complex_relocs_for. Unconditionally
905 encode expression symbols as mangled complex relocation symbols (when
906 compiled with -DOBJ_COMPLEX_RELOC).
907 (symbol_relc_make_sym,value,expr): New traversal/conversion routines.
908 * cgen.c (gas_cgen_md_apply_fix3): Only set signed_p if RELC. Call
909 encode_addend with new args. Modify to get start, length from
910 ifield whenever it is set. Also change condition on which
911 self-describing relocs are encoded. Add hook into
912 gas_cgen_encode_addend.
913 (queue_fixup_recursively): Add signed RELC support. Change from masked
914 expr to trunc flag. Restore assignment of sub-field value to
915 temporary in fixups array. Reflect changed meaning of last arg to
916 queue_fixup_recursively.
917 (fixup): Add cgen_maybe_multi_ifield member.
918 (make_right_shifted_expr): New function.
919 (queue_fixup): Change to recursive function that fragments
920 fixups if operand has a multi-ifield.
921 (gas_cgen_parse_operand): Add RELC code to wrap expressions in
922 symbols, call weak_operand_overflow_check, and fragment call
923 queue_fixup with operand fields.
924 (gas_cgen_finish_insn) Modify to manage ifield pointer.
925 (weak_operand_overflow_check): New function to try to select
927 (gas_cgen_encode_addend): New function for relc.
928 (gas_cgen_install_complex_reloc): Likewise.
929 (gas_cgen_tc_gen_reloc): Add hook into gas_cgen_install_complex_reloc.
930 * write.h (struct fix): Add msb_field_p to fx_cgen sub-struct. Add
931 cgen_maybe_multi_ifield field to fx_cgen substructure.
932 * cgen.h (GAS_CGEN_MAX_FIXUPS): Bump from 3 up to 32.
933 * symbols.h (symbol_relc_make_sym,value,expr): New prototypes.
935 2007-02-03 DJ Delorie <dj@delorie.com>
937 * config/tc-m32c.c (m32c_cons_fix_new): New. Added to support 3
939 * config/tc-m32c.h (TC_CONS_FIX_NEW): Define.
940 (m32c_cons_fix_new): Prototype.
942 2007-02-02 Bob Wilson <bob.wilson@acm.org>
944 * config/tc-xtensa.c (xg_build_to_insn): Use tinsn_init.
945 (xg_expand_assembly_insn, istack_push_space, istack_pop): Likewise.
947 2007-02-02 Bob Wilson <bob.wilson@acm.org>
949 * config/tc-xtensa.c (SUFFIX_MAP, suffix_relocs): New.
950 (xtensa_elf_suffix): Use suffix_relocs instead of local mapping table.
951 (map_suffix_reloc_to_operator): New.
952 (map_operator_to_reloc): New.
953 (expression_maybe_register): Fix incorrect test of return value from
954 xtensa_elf_suffix. Rearrange to use map_suffix_reloc_to_operator.
955 (xg_assemble_literal, convert_frag_immed): Use map_operator_to_reloc.
957 2007-02-02 Bob Wilson <bob.wilson@acm.org>
959 * config/xtensa-istack.h (struct tinsn_struct): Delete fixup field.
960 (tinsn_get_tok): Delete prototype.
961 * config/tc-xtensa.c (tinsn_get_tok): Delete.
963 2007-02-02 Bob Wilson <bob.wilson@acm.org>
965 * config/xtensa-relax.h (struct build_instr): Delete id field.
966 * config/xtensa-relax.c (widen_spec_list): Remove zeros from LITERAL
968 (append_literal_op, append_label_op): Remove litnum/labnum arguments;
969 set op_data fields to zero.
970 (parse_id_constant): Delete.
971 (build_transition): Remove code to handle numbered literals and labels.
973 2007-02-02 Bob Wilson <bob.wilson@acm.org>
975 * config/xtensa-relax.c (build_transition): Remove code after as_fatal.
976 (build_transition_table): Likewise.
978 2007-02-01 Bob Wilson <bob.wilson@acm.org>
980 * config/tc-xtensa.c (xg_add_opcode_fix, md_apply_fix): Delete use of
982 * config/tc-xtensa.h (TC_FORCE_RELOCATION_LOCAL): Remove.
984 2007-02-02 Alan Modra <amodra@bigpond.net.au>
986 * write.h (struct fix <fx_pcrel_adjust, fx_size>): Move.
987 (struct fix <fx_plt>): Rename to tcbit2.
988 * write.c (fix_new_internal): Adjust.
989 (TC_FORCE_RELOCATION_LOCAL): Don't test fx_plt.
990 * config/tc-arm.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
991 * config/tc-cris.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
992 * config/tc-i386.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
993 * config/tc-i960.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
994 * config/tc-sh.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
995 * config/tc-sh64.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
996 * config/tc-sparc.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
997 * config/tc-msp430.c (msp430_force_relocation_local): Likewise.
998 * config/tc-ia64.c (emit_one_bundle): Don't set fx_plt.
999 * config/tc-ia64.h (TC_FORCE_RELOCATION_LOCAL): Don't test fx_plt.
1000 Instead, compare fx_r_type.
1001 * config/tc-xtensa.c (xg_add_opcode_fix, md_apply_fix): Use
1002 fx_tcbit in place of fx_plt.
1003 * config/tc-xtensa.h (TC_FORCE_RELOCATION_LOCAL): Define.
1004 * doc/internals.texi (TC_FORCE_RELOCATION_LOCAL): Remove reference
1007 2007-01-30 Nick Clifton <nickc@redhat.com>
1009 * as.c (main): Mark symbols created via the --defsym command line
1010 option as volatile so that they can be overridden later on by a
1011 .set directive. This maintains compatibility with the behaviour
1012 of earlier versions of the assembler.
1013 * doc/as.texinfo (--defsym): Document that the defined symbol's
1014 value can be overridden via a .set directive.
1016 2007-01-28 H.J. Lu <hongjiu.lu@intel.com>
1018 * config/tc-i386.c (swap_imm_operands): Renamed to ...
1019 (swap_2_operands): This. Take 2 ints.
1020 (md_assemble): Updated.
1021 (swap_operands): Call swap_2_operands to swap 2 operands.
1023 2007-01-24 DJ Delorie <dj@redhat.com>
1025 * config/tc-m32c.c (md_pseudo_table): Add .3byte.
1027 2007-01-22 Nick Clifton <nickc@redhat.com>
1030 * tc-score.c: Remove unnecessary uses of _().
1031 Make the err_msg[] a file level local array in order to save
1033 Remove unnecessary sprintf()s.
1035 2007-01-18 Mei Ligang <ligang@sunnorth.com.cn>
1038 * config/tc-score.c : Using _() for const string.
1039 Do not assign inst.error with a local string pointer.
1040 (md_section_align): Pad section.
1042 2007-01-13 H.J. Lu <hongjiu.lu@intel.com>
1044 * config/tc-i386.c (build_modrm_byte): Check number of operands
1045 when procssing memory/register operand.
1047 2007-01-12 Nick Clifton <nickc@redhat.com>
1050 * macro.c (expand_irp): Do not ignore spaces inside quoted
1053 2007-01-12 Alan Modra <amodra@bigpond.net.au>
1055 * config/tc-spu.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
1056 * config/tc-m32r.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
1057 * config/tc-mn10300.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
1058 (TC_FORCE_RELOCATION): Define.
1059 (TC_FORCE_RELOCATION_LOCAL): Define.
1060 * config/tc-mn10300.c (mn10300_fix_adjustable): Adjust.
1062 2007-01-12 Alan Modra <amodra@bigpond.net.au>
1064 * input-file.c (input_file_open): Check fgets return.
1066 2007-01-11 Paul Brook <paul@codesourcery.com>
1068 * config/tc-arm.c (do_t_add_sub): Use Rd and Rs.
1070 2007-01-11 Nick Clifton <nickc@redhat.com>
1073 * config/tc-arm.c (md_begin): Cope with an NULL mcpu_fpu_opt
1076 * config/tc-mcore.c (md_number_to_chars): Use
1077 number_to_chars_{big|little}endian.
1079 2007-01-08 Kazu Hirata <kazu@codesourcery.com>
1081 * config/tc-m68k.c (m68k_archs, m68k_cpus): Treat Fido as an
1082 architecture by itself.
1083 (m68k_ip): Don't issue a warning for tbl instructions on fido.
1084 (m68k_elf_final_processing): Treat Fido as an architecture by
1087 2007-01-08 Kai Tietz <kai.tietz@onevision.com>
1089 * configure.tgt: Renamed target x86_64-*-mingw64 to x86_64-*-mingw*
1091 2007-01-05 H.J. Lu <hongjiu.lu@intel.com>
1093 * config/tc-i386.c (set_intel_syntax): Update set_intel_syntax
1094 depending on allow_naked_reg.
1096 2007-01-04 Paul Brook <paul@codesourcery.com>
1098 * config/tc-arm.c (do_cpsi): Set mmod bit for 2 argument form.
1100 2007-01-04 H.J. Lu <hongjiu.lu@intel.com>
1103 * config/tc-i386.c (register_prefix): New.
1104 (set_intel_syntax): Set set_intel_syntax to "" if register
1105 prefix isn't needed.
1106 (check_byte_reg): Use register_prefix for error message.
1107 (check_long_reg): Likewise.
1108 (check_qword_reg): Likewise.
1109 (check_word_reg): Likewise.
1111 2006-01-04 Julian Brown <julian@codesourcery.com>
1113 * config/tc-arm.c (do_neon_shl_imm): Swap rN, rM.
1114 (do_neon_qshl_imm): Likewise.
1115 (do_neon_rshl): New function. Handle rounding variants of
1116 v{q}shl-by-register.
1117 (insns): Use do_neon_rshl for vrshl, vqrshl.
1119 2007-01-04 Paul Brook <paul@codesourcery.com>
1121 * config/tc-arm.c (NEON_ENC_TAB): Fix encoding of vclt, vcle, vaclt
1124 2007-01-03 H.J. Lu <hongjiu.lu@intel.com>
1126 * config/tc-i386.c (swap_operands): Remove branches.
1128 2007-01-03 H.J. Lu <hongjiu.lu@intel.com>
1130 * config/tc-i386.c: Update copyright year.
1131 * config/tc-i386.h: Likewise.
1133 2007-01-03 H.J. Lu <hongjiu.lu@intel.com>
1135 * config/tc-i386.c (smallest_imm_type): Return unsigned int
1138 2007-01-03 H.J. Lu <hongjiu.lu@intel.com>
1140 * config/tc-i386.c: Convert to ISO C90 formatting
1141 * config/tc-i386.h: Likewise.
1143 2007-01-03 David Daney <ddaney@avtrex.com>
1145 * config/tc-mips.c (md_show_usage): Clean up -mno-shared
1148 For older changes see ChangeLog-2006
1154 version-control: never