1 2004-02-18 David Mosberger <davidm@hpl.hp.com>
3 * config/tc-ia64.c (ia64_flush_insns): In addition to prologue,
4 body, and endp, allow unwind records which do not have a "t"
5 (time/instruction) field.
7 2004-02-17 Petko Manolov <petkan@nucleusys.com>
9 * config/tc-arm.c (do_mav_dspsc_1): Correct offset of CRn.
10 (do_mav_dspsc_2): Likewise.
11 Fix accumulator registers move opcodes.
13 2004-02-13 Hannes Reinecke <hare@suse.de>
14 Jakub Jelinek <jakub@redhat.com>
16 * dwarf2dbg.c (get_filenum): Do not read beyond allocated memory.
18 2004-02-10 Steve Ellcey <sje@cup.hp.com>
20 * config/tc-ia64.h (ia64_frob_symbol): New declaration.
21 (tc_frob_symbol): New macro definition.
22 * config/tc-ia64.c (ia64_frob_symbol): New routine.
24 2004-02-09 Daniel Jacobowitz <drow@mvista.com>
26 * config/tc-arm.c (md_begin): Mark .note.gnu.arm.ident as
29 2004-02-09 Nathan Sidwell <nathan@codesourcery.com>
31 * read.h (IGNORE_OPCODE_CASE): Do not define. Replace with ...
32 (TC_CASE_SENSITIVE): ... this.
33 * read.c: Replace IGNORE_OPCODE_CASE with TC_CASE_SENSITIVE.
34 * doc/internals.texi (TC_CASE_SENSITIVE): Document.
36 2004-02-06 James E Wilson <wilson@specifixinc.com>
38 * config/tc-ia64.c (dot_endp): Delete call to output_endp.
39 (generate_unwind_image): Re-add it here.
41 2004-02-06 Nathan Sidwell <nathan@codesourcery.com>
43 * dwarf2dbg.c (DWARF2_ADDR_SIZE): Remove trailing ';'
44 * read.h (SKIP_WHITESPACE): Turn into an expression.
45 * read.c (read_a_source_file): A pseudo is removed by having a
48 2004-02-05 James E Wilson <wilson@specifixinc.com>
50 * config/tc-ia64.c (output_endp): New.
52 (ia64_flush_insns, process_one_record, optimize_unw_records): Handle
54 (fixup_unw_records): Handle endp unwind records. Delete code for
55 shortening prologue regions not followed by a body record.
56 (dot_endp): Call add_unwind_entry to emit endp unwind record.
57 * config/tc-ia64.h (unw_record_type): Add endp.
59 2004-02-03 James E Wilson <wilson@specifixinc.com>
61 * config/tc-ia64.c (ia64_convert_frag): Call md_number_to_chars to
62 fill padding bytes with zeroes.
63 (emit_one_bundle): New locals last_ptr, end_ptr. Rewrite code that
64 sets unwind_record slot_number and slot_frag fields.
66 2004-02-02 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
68 * config/tc-mips.c (add_got_offset_hilo): New function.
69 (macro): Use load_register() and add_got_offset_hilo() to load
70 constants instead of hardcoding code sequences throughout.
72 2004-01-28 H.J. Lu <hongjiu.lu@intel.com>
74 * config/tc-ia64.c (emit_one_bundle): Add proper indentation.
76 2004-01-26 Bernardo Innocenti <bernie@develer.com>
78 * config/tc-m68k.h (EXTERN_FORCE_RELOC): Handle m68k-uclinux specially,
80 * config/tc-m68k.c (RELAXABLE_SYMBOL): Use EXTERN_FORCE_RELOC instead
81 of hard-coded test for TARGET_OS=elf.
83 2004-01-24 Chris Demetriou <cgd@broadcom.com>
85 * config/tc-mips.c (hilo_interlocks): Change definition
86 so that MIPS32, MIPS64 and later ISAs are included, along with
87 the already-included machines. Update comments.
89 2004-01-23 Daniel Jacobowitz <drow@mvista.com>
91 * config/tc-arm.c (tc_gen_reloc): Improve error message for
92 undefined local labels.
94 2004-01-23 Richard Sandiford <rsandifo@redhat.com>
96 * config/tc-mips.c (load_address, macro): Update comments about
99 2004-01-23 Richard Sandiford <rsandifo@redhat.com>
101 * config/tc-mips.c (macro_build): Remove place and counter arguments.
102 (mips_build_lui, macro_build_ldst_constoffset): Likewise.
103 (mips16_macro_build, macro_build_jalr): Remove counter argument.
104 (set_at, load_register, load_address, move_register): Likewise.
105 (load_got_offset, add_got_offset): Likewise.
106 Update all calls and tidy accordingly.
108 2004-01-23 Richard Sandiford <rsandifo@redhat.com>
110 * config/tc-mips.c (RELAX_ENCODE): Remove WARN argument.
111 (RELAX_FIRST, RELAX_SECOND): Turn into 8-bit quantities.
112 (RELAX_USE_SECOND): Bump to 0x10000.
113 (RELAX_SECOND_LONGER, RELAX_NOMACRO, RELAX_DELAY_SLOT): New flags.
114 (mips_macro_warning): New variable.
115 (md_assemble): Wrap macro expansion in macro_start() and macro_end().
116 (s_cpload, s_cpsetup, s_cprestore, s_cpreturn): Likewise.
117 (relax_close_frag): Set mips_macro_warning.first_frag. Adjust use
119 (append_insn): Update mips_macro_warning.sizes.
120 (macro_start, macro_warning, macro_end): New functions.
121 (macro_build): Don't emit warnings here.
122 (macro_build_lui, md_estimate_size_before_relax): ...or here.
123 (md_convert_frag): Check for cases where one macro alternative
124 needs a warning and the other doesn't. Emit a warning if the
125 longer sequence was chosen.
127 2004-01-23 Richard Sandiford <rsandifo@redhat.com>
129 * config/tc-mips.h (tc_frag_data_type, TC_FRAG_TYPE): Remove.
130 * config/tc-mips.c (RELAX_ENCODE): Take three arguments: the size of
131 the first sequence, the size of the second sequence, and a flag
132 that says whether we should warn.
133 (RELAX_OLD, RELAX_NEW, RELAX_RELOC[123]): Delete.
134 (RELAX_FIRST, RELAX_SECOND): New.
135 (mips_relax): New variable.
136 (relax_close_frag, relax_start, relax_switch, relax_end): New fns.
137 (append_insn): Remove "place" argument. Use mips_relax.sequence
138 rather than "place" to check whether we're expanding the second
139 alternative of a relaxable macro. Remove redundant check for
140 branch relaxation. If generating a normal insn, and there
141 is not enough room in the current frag, call relax_close_frag()
142 to close it. Update mips_relax.sizes[]. Emit fixups for the
143 second version of a relaxable macro. Record the first relaxable
144 fixup in mips_relax. Remove tc_gen_reloc workaround.
145 (macro_build): Remove all uses of "place". Use mips_relax.sequence
146 in the same way as in append_insn.
147 (mips16_macro_build): Remove "place" argument.
148 (macro_build_lui): As for macro_build. Don't drop the add_symbol
149 when generating the second version of a relaxable macro.
150 (load_got_offset, add_got_offset): New functions.
151 (load_address, macro): Use new relaxation machinery. Remove
152 tc_gen_reloc workarounds.
153 (md_estimate_size_before_relax): Set RELAX_USE_SECOND if the second
154 version of a relaxable macro is needed. Return -RELAX_SECOND if the
155 first version is needed.
156 (tc_gen_reloc): Remove relaxation handling.
157 (md_convert_frag): Go through the fixups for a relaxable macro and
158 mark those that belong to the unneeded alternative as done. If the
159 second alternative is needed, adjust the fixup addresses to account
160 for the deleted first alternative.
162 2004-01-23 Richard Sandiford <rsandifo@redhat.com>
164 * frags.h (frag_room): Declare.
165 * frags.c (frag_room): New function.
166 * doc/internals.texi: Document it.
168 2004-01-22 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
170 * config/tc-mips.c (append_insn): Don't do r3900 interlock
171 optimization for -mtune=r3900, as this will break on other CPUs.
173 2004-01-11 Tom Rix <tcrix@worldnet.att.net>
175 * config/tc-m68hc11.c (build_indexed_byte): movb and movw cannot
176 be relaxed, use fixup.
177 (md_apply_fix3): Use 5 bit reloc from movb and movw fixup.
179 2004-01-19 Jakub Jelinek <jakub@redhat.com>
181 * config/tc-sparc.c (sparc_ip): Disallow %f32-%f63 for single
184 2004-01-14 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
186 * config/tc-mips.c (append_insn): Properly detect variant frags
187 that preclude swapping of relaxed branches. Correctly swap
188 instructions between frags when dealing with relaxed branches.
190 2004-01-14 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
192 * acinclude.m4: Quote names of macros to be defined by AC_DEFUN
194 * aclocal.m4: Regenerate.
195 * configure: Regenerate.
197 2004-01-12 Anil Paranjpe <anilp1@KPITCummins.com>
199 * config/tc-h8300.c (build_bytes): Apply relaxation to bit
202 2004-01-12 Richard Sandiford <rsandifo@redhat.com>
204 * config/tc-mips.c (macro_build_jalr): When adding an R_MIPS_JALR
205 reloc, reserve space for the delay slot as well as the jalr itself.
207 2004-01-09 Paul Brook <paul@codesourcery.com>
209 * config/tc-arm.c (do_vfp_reg2_from_sp2): Rename from do_vfp_sp_reg2.
210 (do_vfp_sp2_from_reg2): New function.
212 (do_vfp_dp_from_reg2): Check return values properly.
214 2004-01-08 Ian Lance Taylor <ian@wasabisystems.com>
216 * config/tc-mips.c (warn_nops): Remove static variable.
217 (macro): Remove test of warn_nops.
218 (md_shortops): Remove 'n'.
219 (md_parse_option): Remove 'n' case.
220 (md_show_usage): Remove -n.
221 * doc/as.texinfo (Overview): Remove MIPS -n option.
222 * doc/c-mips.texi (MIPS Opts): Remove mention -n.
223 * NEWS: Mention removal of MIPS -n option.
225 * config/tc-mips.c (ISA_HAS_COPROC_DELAYS): Remove.
226 (cop_interlocks): Check ISA level.
227 (cop_mem_interlocks): Define.
228 (reg_needs_delay): Check cop_interlocks rather than
229 ISA_HAS_COPROC_DELAYS.
230 (append_insn): Likewise. Use cop_mem_interlocks rather than
231 directly checking mips_opts.isa.
232 (mips_emit_delays): Likewise.
234 2004-01-07 H.J. Lu <hongjiu.lu@intel.com>
236 * config/tc-ia64.c (unwind): Move next_slot_number and
237 next_slot_frag to ...
238 (unw_rec_list): Here.
239 (free_list_records): Removed.
240 (output_unw_records): Likewise.
241 (generate_unwind_image): Make it void.
242 (alloc_record): Initialize next_slot_number and next_slot_frag.
243 (slot_index): Take .org, .space and .align into account.
244 (fixup_unw_records): Don't set slot_number to 0. Use
245 list->next_slot_number and list->next_slot_frag instead of
246 unwind.next_slot_number and unwind.next_slot_frag.
247 (ia64_convert_frag): New.
248 (generate_unwind_image): Generate a rs_machine_dependent frag
250 (emit_one_bundle): Use list->next_slot_number and
251 list->next_slot_frag instead of unwind.next_slot_number and
252 unwind.next_slot_frag.
254 * config/tc-ia64.h (md_convert_frag): Defined as
256 (md_estimate_size_before_relax): Defined as (f)->fr_var.
258 2004-01-06 Alexandre Oliva <aoliva@redhat.com>
260 2003-12-19 Alexandre Oliva <aoliva@redhat.com>
261 * config/tc-frv.h (md_apply_fix3): Don't define.
262 * config/tc-frv.c (md_apply_fix3): New. Shift/truncate %hi/%lo
264 * config/tc-frv.h (TC_FORCE_RELOCATION_SUB_LOCAL): Define.
265 2003-10-07 Alexandre Oliva <aoliva@redhat.com>
266 * config/tc-frv.c (line_separator_chars): Add `!'.
267 2003-09-19 Alexandre Oliva <aoliva@redhat.com>
268 * config/tc-frv.c (md_assemble): Clear insn upfront.
269 2003-09-18 Alexandre Oliva <aoliva@redhat.com>
270 * config/tc-frv.c (OPTION_FDPIC): New macro.
271 (md_longopts): Add mfdpic.
272 (md_parse_option): Handle it.
273 2003-08-04 Alexandre Oliva <aoliva@redhat.com>
274 * config/tc-frv.c (md_cgen_lookup_reloc) <FRV_OPERAND_D12,
275 FRV_OPERAND_S12>: Use reloc type encoded in fix-up.
276 (frv_pic_ptr): Parse funcdesc.
278 2004-01-05 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
280 * doc/as.texinfo: Let texi2pod parse asconfig.texi and
281 gasver.texi. Remove duplicate symbol definitions for texi2pod.
283 2004-01-05 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
285 * Makefile.am (Makefile): Move the dependency on
286 $(BFDDIR)/configure.in to...
287 (CONFIG_STATUS_DEPENDENCIES): ... here.
288 (AUTOMAKE_OPTIONS): Require automake 1.8.
289 * Makefile.in: Regenerate.
290 * doc/Makefile.am (BASEDIR, BFDDIR): Define.
291 (CONFIG_STATUS_DEPENDENCIES): Add a dependency on
292 $(BFDDIR)/configure.in here as well.
293 * doc/Makefile.in: Regenerate.
295 2004-01-05 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
297 * Makefile.am (install, install-info, RECURSIVE_TARGETS): Remove.
298 * Makefile.in: Regenerate.
299 * aclocal.m4: Regenerate.
300 * doc/Makefile.am (install, install-info): Remove.
301 (install-data-local): A new hook for install-info.
302 (AUTOMAKE_OPTIONS): Require automake 1.8.
303 * doc/Makefile.in: Regenerate.
305 2004-01-02 Nutan Singh <nutan@kpitcummins.com>
307 * doc/c-sh.texi: Update description about floating point behavior
310 2004-01-02 Bernardo Innocenti <bernie@develer.com>
312 * configure.in: Add m68k-uClinux target.
313 * configure: Regenerate.
315 For older changes see ChangeLog-0203
321 version-control: never