1 2015-11-27 Matthew Wahab <matthew.wahab@arm.com>
3 * config/tc-aarch64.c (aarch64_features): Add "fp16".
4 * doc/c-aarch64.texi (Architecture Extensions): Add "fp16".
6 2015-11-24 Christophe Monat <christophe.monat@st.com>
8 * config/tc-arm.c (move_or_literal_pool): Do not transform ldr
9 ri,=imm into movs when ri is a high register in T1.
11 2015-11-20 Nick Clifton <nickc@redhat.com>
13 * po/fr.po: Updated French translation.
14 * po/uk.po: Updated Ukraninan translation.
15 * po/zh_CN.po: New simplified Chinese translation.
16 * configure.ac (ALL_LINGUAS): Add zh_CN.
17 * configure: Regenerate.
19 2015-11-19 Matthew Wahab <matthew.wahab@arm.com>
21 * config/tc-arm.c (arm_archs): Add "armv8.2-a".
22 * doc/c-arm.texi (-march): Add "armv8.2-a".
24 2015-11-19 Matthew Wahab <matthew.wahab@arm.com>
26 * config/tc-aarch64.c (aarch64_archs): Add "armv8.2-a".
27 * doc/c-aarch64.texi (-march): Likewise.
29 2015-11-19 Alan Modra <amodra@gmail.com>
31 * read.c (output_big_leb128): Describe "sign" parameter.
33 2015-11-19 Alan Modra <amodra@gmail.com>
35 * config/tc-ppc.h (SUB_SEGMENT_ALIGN): Define only for ELF.
37 2015-11-16 Mike Frysinger <vapier@gentoo.org>
39 * config/tc-microblaze.c (parse_imm): Add an offsetT cast.
41 2015-11-13 Tristan Gingold <gingold@adacore.com>
43 * configure: Regenerate.
45 2015-11-13 Tristan Gingold <gingold@adacore.com>
47 * NEWS: Add marker for 2.26.
49 2015-11-12 James Greenhalgh <james.greenhalgh@arm.com>
51 * config/tc-aarch64.c (aarch64_cpus): Add cortex-a35.
52 * doc/c-aarch64.texi (-mcpu=): Likewise.
54 2015-11-12 James Greenhalgh <james.greenhalgh@arm.com>
56 * config/tc-arm.c (arm_cpus): Likewise.
57 * doc/c-arm.texi (-mcpu=): Likewise.
59 2015-11-12 Matthew Wahab <matthew.wahab@arm.com>
62 * config/tc-arm.c (move_or_literal_pool): Remove redundant feature
63 check. Fix some code formatting. Drop use of MOVT. Add some
66 2015-11-11 Alan Modra <amodra@gmail.com>
67 Peter Bergner <bergner@vnet.ibm.com>
69 * doc/as.texinfo (Target PowerPC): Document -mpower9 and -mpwr9.
70 * doc/c-ppc.texi (PowerPC-Opts): Likewise.
71 * config/tc-ppc.c (md_show_usage): Likewise.
72 (md_assemble): Handle BFD_RELOC_PPC_REL16DX_HA.
73 (md_apply_fix): Likewise.
74 (ppc_handle_align): Handle power9's group ending nop.
76 2015-11-09 Jim Wilson <jim.wilson@linaro.org>
78 * config/tc-aarch64.c (aarch64_cpus): Add qdf24xx.
79 * config/tc-arm.c (arm_cpus): Likewise.
80 * doc/c-arm.texi, doc/c-aarch64.texi: Likewise.
82 2015-11-09 Dominik Vogt <vogt@linux.vnet.ibm.com>
84 * read.c (parse_bitfield_cons): Fix left shift of negative value.
85 * config/tc-xstormy16.c (md_section_align): Likewise.
86 * config/tc-xgate.c (md_section_align): Likewise.
87 * config/tc-visium.c (md_section_align): Likewise.
88 * config/tc-v850.c (md_section_align): Likewise.
89 * config/tc-tic6x.c (md_section_align): Likewise.
90 * config/tc-sh.c (SH64PCREL32_M, SH64PCREL48_M, SH64PCREL32_M)
91 (MOVI_32_M, MOVI_48_M, MOVI_32_M, md_section_align): Likewise.
92 * config/tc-sh64.c (shmedia_md_estimate_size_before_relax): Likewise.
93 * config/tc-score.c (s3_section_align): Likewise.
94 * config/tc-score7.c (s7_section_align): Likewise.
95 * config/tc-s390.c (md_section_align): Likewise.
96 * config/tc-rx.c (md_section_align): Likewise.
97 * config/tc-rl78.c (md_section_align): Likewise.
98 * config/tc-ppc.c (md_section_align): Likewise.
99 * config/tc-or1k.c (md_section_align): Likewise.
100 * config/tc-nds32.c (md_section_align): Likewise.
101 * config/tc-mt.c (md_section_align): Likewise.
102 * config/tc-msp430.c (md_section_align): Likewise.
103 * config/tc-mn10300.c (md_section_align): Likewise.
104 * config/tc-mn10200.c (md_section_align): Likewise.
105 * config/tc-mips.c (md_section_align): Likewise.
106 * config/tc-microblaze.c (parse_imm): Likewise.
107 * config/tc-mep.c (md_section_align): Likewise.
108 * config/tc-m68k.c (md_section_align): Likewise.
109 * config/tc-m68hc11.c (md_section_align): Likewise.
110 * config/tc-m32r.c (md_section_align): Likewise.
111 * config/tc-m32c.c (md_section_align): Likewise.
112 * config/tc-lm32.c (md_section_align): Likewise.
113 * config/tc-iq2000.c (md_section_align): Likewise.
114 * config/tc-ip2k.c (md_section_align): Likewise.
115 * config/tc-ia64.c (dot_save, dot_vframe): Likewise.
116 * config/tc-i960.c (md_number_to_field, md_section_align): Likewise.
117 * config/tc-i386.c (md_section_align): Likewise.
118 * config/tc-i370.c (md_section_align): Likewise.
119 * config/tc-frv.c (md_section_align): Likewise.
120 * config/tc-fr30.c (md_section_align): Likewise.
121 * config/tc-epiphany.c (md_section_align): Likewise.
122 * config/tc-d30v.c (md_section_align): Likewise.
123 * config/tc-d10v.c (md_section_align): Likewise.
124 * config/tc-cr16.c (l_cons): Likewise.
125 * config/tc-bfin.c (md_section_align): Likewise.
126 * config/tc-arm.c (md_section_align): Likewise.
127 * config/tc-arc.c (md_section_align): Likewise.
128 * config/bfin-parse.y (expr_1): Likewise.
130 2015-11-02 Nick Clifton <nickc@redhat.com>
132 * config/rx-parse.y: Allow zero value for 5-bit displacements.
134 2015-11-02 Nick Clifton <nickc@redhat.com>
136 * config/tc-rx.c (parse_rx_section): Align parameter provides a
137 multiple of n argument, not a power of n argument.
139 2015-10-29 Nick Clifton <nickc@redhat.com>
141 * config/tc-aarch64.c (elf64_aarch64_target_format): Select the
142 cloudabi format if the TARGET_OS is cloudabi.
144 2015-10-29 Thomas Preud'homme <thomas.preudhomme@arm.com>
146 * config/tc-arm.c (insns): Guard cps by arm_ext_v6_notm instead of
149 2015-10-28 Claudiu Zissulescu <claziss@synopsys.com>
151 * config/tc-arc.c (tokenize_arguments): Avoid creating unused
152 symbols when parsing relocation types.
153 (md_apply_fix): Handle TLS relocations. Fix BFD_RELOC_ARC_32_PCREL
155 (arc_check_reloc): Emit BFD_RELOC_ARC_32_PCREL relocation.
157 2015-10-27 Jim Wilson <jim.wilson@linaro.org>
159 * config/tc-arm.c (selected_cpu_name): Increase length of array to
160 accomodate "Samsung Exynos M1".
161 (arm_parse_cpu): Add assertion and length check to prevent
162 overfilling selected_cpu_name.
164 2015-10-22 Nick Clifton <nickc@redhat.com>
166 * config/tc-msp430.c (PUSH_1X_WORKAROUND): Delete.
167 (OPTION_SILICON_ERRATA): Define.
168 (OPTION_SILICON_WARN): Define.
169 (md_parse_opton): Handle silicon errata options.
170 (md_longopts): Add silicon errata options.
171 (ms_show_usage): Report silicon errata options.
172 (msp430_srcoperand): Handle silicon errata.
173 (msp430_operands): Likewise. Improve nop insertion.
174 (msp430_fix_adjustable): Update warning generation.
175 * doc/c-msp430.texi: Document silicon errata options.
177 2015-10-22 H.J. Lu <hongjiu.lu@intel.com>
179 * configure.ac: Properly check
180 --enable-compressed-debug-sections={yes,all}.
181 * configure: Regenerated.
183 2015-10-22 H.J. Lu <hongjiu.lu@intel.com>
186 * configure.ac: Handle --enable-compressed-debug-sections=*,gas,*.
187 * configure: Regenerated.
189 2015-10-22 H.J. Lu <hongjiu.lu@intel.com>
191 * config/tc-i386.c (tc_i386_fix_adjustable): Handle
192 BFD_RELOC_X86_64_GOTPCRELX and BFD_RELOC_X86_64_REX_GOTPCRELX.
193 (tc_gen_reloc): Likewise.
194 (i386_validate_fix): Generate BFD_RELOC_X86_64_GOTPCRELX or
195 BFD_RELOC_X86_64_REX_GOTPCRELX if fx_tcbit2 is set.
196 * config/tc-i386.h (TC_FORCE_RELOCATION_LOCAL): Also return
197 true for BFD_RELOC_X86_64_GOTPCRELX and
198 BFD_RELOC_X86_64_REX_GOTPCRELX.
200 2015-10-22 H.J. Lu <hongjiu.lu@intel.com>
202 * config/tc-i386.c (tc_i386_fix_adjustable): Handle
203 BFD_RELOC_386_GOT32X.
204 (tc_gen_reloc): Likewise.
205 (match_template): Force 0x8b encoding for "mov foo@GOT, %eax".
206 (output_disp): Check for "call/jmp *mem", "mov mem, %reg",
207 "test %reg, mem" and "binop mem, %reg" where binop is one of
208 adc, add, and, cmp, or, sbb, sub, xor instructions. Set
209 fx_tcbit if the REX prefix is generated. Set fx_tcbit2 if
210 BFD_RELOC_386_GOT32X should be generated.
211 (i386_validate_fix): Generate BFD_RELOC_386_GOT32X if fx_tcbit2
214 2015-10-21 Nick Clifton <nickc@redhat.com>
217 * configure.ac: Restore --enable-compressed-debug-sections, with
218 options of all, none or gas.
219 Do not enable compressed debug sections by default for x86 Linux
221 * configure: Regenerate.
223 2015-10-20 H.J. Lu <hongjiu.lu@intel.com>
226 * NEWS: Update --enable-compressed-debug-sections=.
227 * configure.ac: Remove --enable-compressed-debug-sections.
228 (DEFAULT_FLAG_COMPRESS_DEBUG): Check
229 --enable-compressed-debug-sections={all,gas} instead of
230 --enable-compressed-debug-sections. For x86 Linux targets,
231 default to compressing debug sections.
232 * configure: Regenerated.
234 2015-10-19 Nick Clifton <nickc@redhat.com>
237 * configure.ac: Add option --enable-compressed-debug-sections.
238 This sets the default behaviour for compressing debug sections.
239 * as.c (flag_compress_debug): Define and initialise to
240 COMPRESS_DEBUG_GABI_ZLIB if DEFAULT_COMPRESS_DEBUG is set.
241 (show_usage): Indicate whether --no-compress-debug-sections
242 or --compress-debug-sections is the default.
243 * config/tc-i386.c (flag_compress_debug): Delete definition.
244 * doc/as.texinfo (--nocompress-debug-sectionas): Update
246 * NEWS: Announce the new feature.
247 * config.in: Regenerate.
248 * configure: Regenerate.
250 2015-10-12 Nick Clifton <nickc@redhat.com>
252 * config/tc-msp430.c (msp430_mcu_names): Rename to
253 msp430_mcu_data. Add fields for the ISA and hardware multiply
254 support. Update with information from the latest devices.csv
256 (md_parse_option): Make use of the new array.
258 2015-10-12 Andrew Burgess <andrew.burgess@embecosm.com>
260 * config/tc-avr.c (avr_output_property_record): Fix overwrite bug
261 for align and fill records.
262 (avr_handle_align): Record fill information for align frags.
263 (create_record_for_frag): Add next frag assertion, use correct
264 address for align records.
266 2015-10-10 Alan Modra <amodra@gmail.com>
269 * read.c (next_char_of_string): Mask char after escape. Use
270 CHAR_MASK rather than 0xff.
272 2015-10-07 Yao Qi <yao.qi@linaro.org>
274 * config/tc-aarch64.c (md_begin): Access field 'name' rather
277 2015-10-07 Claudiu Zissulescu <claziss@synopsys.com>
279 * config/tc-arc.c: Revamped file for ARC support.
280 * config/tc-arc.h: Likewise.
281 * doc/as.texinfo: Add new ARC options.
282 * doc/c-arc.texi: Likewise.
284 2015-10-02 Renlin Li <renlin.li@arm.com>
286 * config/tc-aarch64.c (s_tlsdescadd): New.
288 (md_pseudo_table): Handle tlsdescadd and tlsdescldr pseudo ops.
289 (reloc_table): Add entries for BFD_RELOC_AARCH64_TLSDESC_OFF_G0_NC and
290 BFD_RELOC_AARCH64_TLSDESC_OFF_G0_NC.
291 (process_movw_reloc_info): Support AARCH64_TLSDESC_OFF_G1 and
292 AARCH64_TLSDESC_OFF_G0_NC.
293 (md_apply_fix): Likewise.
294 (aarch64_force_relocation): Likewise.
296 2015-10-02 Renlin Li <renlin.li@arm.com>
298 * config/tc-aarch64.c (reloc_table): Add two entries for
299 gottprel_g0_nc and gottprel_g1.
300 (process_movw_reloc_info): Add support.
301 (md_apply_fix): Likewise.
302 (aarch64_force_relocation): Likewise.
304 2015-10-02 Renlin Li <renlin.li@arm.com>
306 * config/tc-aarch64.c (reloc_table): New relocation modifier tlsgd_g0_nc.
307 (process_movw_reloc_info): Support BFD_RELOC_AARCH64_TLSGD_MOVW_G1.
308 (md_apply_fix): Likewise.
309 (aarch64_force_relocation): Likewise.
311 2015-10-02 Renlin Li <renlin.li@arm.com>
313 * config/tc-aarch64.c (reloc_table): New relocation modifier tlsgd_g1.
314 (process_movw_reloc_info): Support BFD_RELOC_AARCH64_TLSGD_MOVW_G1.
315 (md_apply_fix): Likewise.
316 (aarch64_force_relocation): Likewise.
318 2015-10-02 Renlin Li <renlin.li@arm.com>
320 * config/tc-aarch64.c (reloc_table): New relocation modifier
322 (process_movw_reloc_info): Support gotoff_g0_nc.
323 (md_apply_fix): Likewise.
325 2015-10-02 Renlin Li <renlin.li@arm.com>
327 * config/tc-aarch64.c (reloc_table): New relocation modifier
329 (process_movw_reloc_info): Support newly added modifier.
330 (md_apply_fix): Likewise.
332 2015-09-29 Dominik Vogt <vogt@linux.vnet.ibm.com>
334 * doc/c-s390.texi: Add documentation.
335 Add missing code markup.
336 * config/tc-s390.c (current_flags): New static variable.
337 (s390_parse_cpu): Parse cpu flags a la "+nohtm" etc.
338 (s390_setup_opcodes): Use cpu flags to determine the set of opcodes.
340 (md_parse_option): Call s390_parse_cpu with the new signature.
341 (s390_machine): Likewise.
342 Keep track of current_flags.
344 undefine MAX_HISTORY at end of function.
345 (s390_machinemode): undefine MAX_HISTORY at end of function.
346 Update an error message.
348 2015-08-11 Peter Zotov <whitequark@whitequark.org>
351 * config/tc-or1k.c (tc_gen_reloc): Correct computation of PC
353 * config/tc-or1k.h (GAS_CGEN_PRCEL_R_TYPE): Delete.
355 2015-09-25 Ryo ONODERA <ryo_on@yk.rim.or.jp>
358 * configure.ac (nds32): Don't use bash == in tests.
359 * configure: Regenerate.
361 2015-09-23 Nick Clifton <nickc@redhat.com>
363 * config/tc-ppc.c (insn_validate): Cast PPC_OPSHIFT_INV to an int.
365 2015-09-22 Nick Clifton <nickc@redhat.com>
367 * config/tc-rx.c (nop_7): Recode using MAX.
369 2015-09-05 Chen Gang <gang.chen.5i5j@gmail.com>
371 * config/tc-avr.c (md_section_align): Append UL for -1 to avoid
372 the latest gcc's warning.
374 2015-08-27 Alan Modra <amodra@gmail.com>
377 * config/tc-aarch64.h (TC_START_LABEL): Redefine.
378 * config/tc-arm.c (tc_start_label_without_colon): Delete params.
379 Use input_line_pointer directly.
380 * config/tc-arm.h (TC_START_LABEL): Redefine.
381 (TC_START_LABEL_WITHOUT_COLON): Redefine.
382 (tc_start_label_without_colon): Update prototype.
383 * config/tc-bfin.c (bfin_start_label): Delete ptr param. Check
385 * config/tc-bfin.h (bfin_start_label): Update prototype.
386 (TC_START_LABEL): Redefine.
387 * config/tc-d30v.h (TC_START_LABEL): Redefine.
388 * config/tc-fr30.c (restore_colon): Rewrite.
389 (fr30_is_colon_insn): Add nul_char param. Return int. Bump
390 i_l_p over quote. Update restore_colon calls.
391 * config/tc-fr30.h (TC_START_LABEL): Redefine.
392 (fr30_is_colon_insn): Update prototype.
393 * config/tc-m32c.c (restore_colon, m32c_is_colon_insn): As above.
394 * config/tc-m32c.h (TC_START_LABEL): Redefine.
395 (m32c_is_colon_insn): Update prototype.
396 * config/tc-m32r.h (TC_START_LABEL): Redefine.
397 * config/tc-mep.h (TC_START_LABEL): Redefine.
398 * config/tc-nds32.h (TC_START_LABEL): Redefine.
399 * config/tc-tic54x.c (tic54x_start_label): Replace params with
400 nul_char and next_char. Step over trailing quote.
401 * config/tc-tic54x.h (TC_START_LABEL_WITHOUT_COLON): Redefine.
402 (tic54x_start_label): Update prototype.
403 * read.c (TC_START_LABEL): Redefine. Update invocation.
404 (TC_START_LABEL_WITHOUT_COLON): Update invocation.
405 * config/tc-nios2.c (s_nios2_set): Save initial input_line_pointer
406 and restore if calling s_set. Don't restore delim again.
408 2015-08-26 Alan Modra <amodra@gmail.com>
411 * config/tc-mn10200.c (md_assemble <mdr>): Move restore_line_pointer
412 call to where input line used to be restored.
413 * config/tc-mn10300.c (md_assemble <usp>): Remove redundant input
415 * config/tc-tilepro.c (parse_reg_expression): Add regname var.
417 2015-08-26 Nick Clifton <nickc@redhat.com>
420 * configure.ac (AS_CHECK_DECLS): Add asprintf.
421 * configure: Regenerate.
422 * config.in: Regenerate.
424 2015-08-25 Jose E. Marchesi <jose.marchesi@oracle.com>
426 * config/tc-sparc.c (priv_reg_table): New privileged register
429 2015-08-21 Nick Clifton <nickc@redhat.com>
432 * expr.c (get_symbol_end): Rename to get_symbol_name. Add a
433 return parameter pointing to the start of the symbol. Allow
434 symbol names enclosed in double quotes.
435 (restore_line_pointer): New function. Replace the NUL character
436 inserted into the input stream with the given character. If the
437 character was a double quote, advance the input pointer.
438 * expr.h (get_symbol_end): Delete.
439 (get_symbol_name): Add prototype.
440 (restore_line_pointer): Prototype.
441 * read.h (SKIP_WHITESPACE_AFTER_NAME): New macro.
442 * doc/as.texinfo (Symbol Intro): Document that symbol names can
443 now be enclosed in double quotes.
444 * cond.c (s_ifdef): Replace get_symbol_end with get_symbol_name.
445 Use restore_line_pointer to replace the NUL in the input stream.
446 Use SKIP_WHITESPACE_AFTER_NAME to skip past the end of a symbol.
447 Check for the use of double quoted symbol names.
449 * config/obj-aout.c: Likewise.
450 * config/obj-coff-seh.c: Likewise.
451 * config/obj-coff.c: Likewise.
452 * config/obj-elf.c: Likewise.
453 * config/obj-evax.c: Likewise.
454 * config/obj-macho.c: Likewise.
455 * config/obj-som.c: Likewise.
456 * config/tc-alpha.c: Likewise.
457 * config/tc-arc.c: Likewise.
458 * config/tc-arm.c: Likewise.
459 * config/tc-dlx.c: Likewise.
460 * config/tc-h8300.c: Likewise.
461 * config/tc-hppa.c: Likewise.
462 * config/tc-i370.c: Likewise.
463 * config/tc-i386-intel.c: Likewise.
464 * config/tc-i386.c: Likewise.
465 * config/tc-i960.c: Likewise.
466 * config/tc-ia64.c: Likewise.
467 * config/tc-iq2000.c: Likewise.
468 * config/tc-m32r.c: Likewise.
469 * config/tc-m68hc11.c: Likewise.
470 * config/tc-m68k.c: Likewise.
471 * config/tc-microblaze.c: Likewise.
472 * config/tc-mips.c: Likewise.
473 * config/tc-mmix.c: Likewise.
474 * config/tc-mn10200.c: Likewise.
475 * config/tc-mn10300.c: Likewise.
476 * config/tc-nios2.c: Likewise.
477 * config/tc-ppc.c: Likewise.
478 * config/tc-s390.c: Likewise.
479 * config/tc-score.c: Likewise.
480 * config/tc-score7.c: Likewise.
481 * config/tc-sparc.c: Likewise.
482 * config/tc-tic4x.c: Likewise.
483 * config/tc-tic54x.c: Likewise.
484 * config/tc-tic6x.c: Likewise.
485 * config/tc-tilegx.c: Likewise.
486 * config/tc-tilepro.c: Likewise.
487 * config/tc-v850.c: Likewise.
488 * config/tc-xtensa.c: Likewise.
489 * config/tc-z80.c: Likewise.
490 * dw2gencfi.c: Likewise.
491 * dwarf2dbgc.: Likewise.
496 2015-08-19 Jiong Wang <jiong.wang@arm.com>
498 * config/tc-aarch64.c (reloc_table): New relocation types support for
500 (ldst_lo12_determine_real_reloc_type): Support
501 BFD_RELOC_AARCH64_TLSLD_LDST16_DTPREL_LO12,
502 BFD_RELOC_AARCH64_TLSLD_LDST16_DTPREL_LO12_NC,
503 BFD_RELOC_AARCH64_TLSLD_LDST32_DTPREL_LO12,
504 BFD_RELOC_AARCH64_TLSLD_LDST32_DTPREL_LO12_NC,
505 BFD_RELOC_AARCH64_TLSLD_LDST64_DTPREL_LO12,
506 BFD_RELOC_AARCH64_TLSLD_LDST64_DTPREL_LO12_NC,
507 BFD_RELOC_AARCH64_TLSLD_LDST8_DTPREL_LO12,
508 BFD_RELOC_AARCH64_TLSLD_LDST8_DTPREL_LO12_NC.
509 (parse_operands): Likewise.
510 (md_apply_fix): Likewise.
511 (aarch64_force_relocation): Likewise.
512 (process_movw_reloc_info): Likewise.
514 2015-08-19 Jiong Wang <jiong.wang@arm.com>
516 * config/tc-aarch64.c (reloc_table): New relocation modifiers,
517 "dtprel_hi12", "dtprel_g0", "dtprel_g0_nc", "dtprel_g1",
518 "dtprel_g1_nc", "dtprel_g2".
519 (md_apply_fix): Support new relocation types.
520 (aarch64_force_relocation): Likewise.
521 (process_movw_reloc_info): Likewise.
523 2015-08-19 Jiong Wang <jiong.wang@arm.com>
525 * config/tc-aarch64.c (reloc_table): New relocation modifiers.
526 (md_apply_fix): Support BFD_RELOC_AARCH64_TLSLD_ADD_DTPREL_LO12_NC.
527 (aarch64_force_relocation): Likewise.
529 2015-08-17 Alan Modra <amodra@gmail.com>
531 * gas/config/tc-arm.c (s_align): Delete.
532 (md_pseudo_table): Use s_align_ptwo for "align".
533 * gas/config/tc-arm.h (TC_ALIGN_ZERO_IS_DEFAULT): Define.
534 * read.c (s_align): Modify for TC_ALIGN_ZERO_IS_DEFAULT.
536 2015-08-13 Alan Modra <amodra@gmail.com>
538 * expr.c (operand): Rewrite handling of operands starting with "0f".
539 If atof_generic only parses "-" or "+", treat as expression.
541 2015-08-13 Alan Modra <amodra@gmail.com>
542 DJ Delorie <dj@redhat.com>
544 * expr.c (integer_constant): Return O_absent expression if eol.
545 (operand): For targets with both LOCAL_LABELS_FB and
546 NUMBERS_WITH_SUFFIX set, treat "0b" not followed by binary
547 digits as a local label reference. Correct handling of 0b prefix.
548 If a suffix is not allowed, error on 0B.
550 2015-08-13 Alan Modra <amodra@gmail.com>
552 * doc/as.texinfo (Local Labels): Allowed range of N in local
553 labels is non-negative integers, not positive integers.
555 2015-08-12 David Weatherford <weath@cadence.com>
557 * config/tc-xtensa.c (struct litpool_frag, struct litpool_seg):
559 (xtensa_maybe_create_literal_pool_frag): New function.
560 (litpool_seg_list, auto_litpools, auto_litpool_limit)
561 (litpool_buf, litpool_slotbuf): New static variables.
562 (option_auto_litpools, option_no_auto_litpools)
563 (option_auto_litpool_limit): New enum identifiers.
564 (md_longopts): Add entries for auto-litpools, no-auto-litpools
565 and auto-litpool-limit.
566 (md_parse_option): Handle option_auto_litpools,
567 option_no_auto_litpools and option_auto_litpool_limit.
568 (md_show_usage): Add help for --[no-]auto-litpools and
569 --auto-litpool-limit.
570 (xtensa_mark_literal_pool_location): Record a place for literal
571 pool with a call to xtensa_maybe_create_literal_pool_frag.
572 (get_literal_pool_location): Find highest priority literal pool
573 or convert candidate to literal pool when auto-litpools are used.
574 (xg_assemble_vliw_tokens): Create literal pool after jump
576 (xtensa_check_frag_count): Create candidate literal pool every
577 auto_litpool_limit frags.
578 (xtensa_relax_frag): Add jump around literals to non-empty
580 (xtensa_move_literals): Estimate literal pool addresses and move
581 unreachable literals closer to their users, converting candidate
582 to literal pool if needed.
583 (xtensa_switch_to_non_abs_literal_fragment): Only emit error
584 about missing .literal_position in case auto-litpools are not
586 * config/tc-xtensa.h (xtensa_relax_statesE): New relaxation
587 state: RELAX_LITERAL_POOL_CANDIDATE_BEGIN.
588 * doc/as.texinfo (Xtensa options): Document --auto-litpools and
589 --no-auto-litpools options.
590 * doc/c-xtensa.texi (Xtensa options): Likewise.
592 2015-08-12 Simon Dardis <simon.dardis@imgtec.com>
594 * config/tc-mips.c (move_register): Change to use 'or' only.
595 (s_cpload, s_cpsetup, s_cprestore, s_cpreturn): Update to
598 2015-08-11 Jiong Wang <jiong.wang@arm.com>
600 * config/tc-aarch64.c (reloc_table): New relocation modifiers
602 (md_apply_fix): Support BFD_RELOC_AARCH64_TLSLD_ADD_DTPREL_LO12.
603 (aarch64_force_relocation): Likewise.
605 2015-08-11 Jiong Wang <jiong.wang@arm.com>
607 * config/tc-aarch64.c (reloc_table): New relocation modifiers.
608 (md_apply_fix): Support BFD_RELOC_AARCH64_TLSLD_ADD_LO12_NC.
609 (aarch64_force_relocation): Likewise.
611 2015-08-11 Jiong Wang <jiong.wang@arm.com>
613 * config/tc-aarch64.c (reloc_table): New relocation modifiers.
614 (md_apply_fix): Support BFD_RELOC_AARCH64_TLSLD_ADR_PAGE21.
615 (aarch64_force_relocation): Likewise.
617 2015-08-11 Nick Clifton <nickc@redhat.com>
620 * config/tc-arm.c (move_or_literal_pool): Use U suffix to remove
621 compile time warnings about constant expressions being shifted
623 (do_iwmmxt_wldstd): Likewise.
624 (do_iwmmxt_wrwrwr_or_imm5): Likewise.
625 (md_assemble): Likewise.
628 * config/tc-msp430.c (msp430_operands): Rewrite if statements to
629 remove redundant checks.
630 (md_apply_fix): Likewise.
633 * config/tc-mmix.c (md_assemble): Fix typo checking operands with
634 a numeric constant value.
637 * config/tc-tic4x.c (tic4x_insn_check): Fix typo.
640 * config/xtensa-relax.c (same_operand_name): Fix typo.
642 2015-08-08 Hans-Peter Nilsson <hp@axis.com>
644 * tc-arm.c (double_to_single, is_double_a_single): Append ULL to
645 0xFFFFFFFFFFFFF to avoid errors on 32-bit hosts.
647 2015-08-04 Thomas Preud'homme <thomas.preudhomme@arm.com>
649 * doc/c-aarch64.texi (.xword): Document directive.
651 2015-08-03 Nick Clifton <nickc@redhat.com>
653 * doc/as.texinfo (Overview): Add --hash-size to the synopsis and
654 fix typo in its entry: @kindex -> @item.
656 2015-07-28 Robert Suchanek <robert.suchanek@imgtec.com>
658 * config/tc-mips.c (mips_cpu_info_table): Add m5100 and m5101 entries.
659 * doc/c-mips.texi: Document m5100 and m5101 for -march=.
661 2015-07-28 Robert Suchanek <robert.suchanek@imgtec.com>
663 * config/tc-mips.c (mips_cpu_info_table): Add interaptiv entry.
664 * doc/c-mips.text: Document -march=interaptiv.
666 2015-07-27 H.J. Lu <hongjiu.lu@intel.com>
668 * configure: Regenerated.
670 2015-07-24 Nick Clifton <nickc@redhat.com>
672 * config/tc-rl78.c (rl78_abs_sym): New local variable.
673 (md_begin): Initialise the new symbol.
674 (OPIMM): Define the value to be relative to the new symbol and not
675 the absolute section symbol.
677 2015-07-22 Alan Modra <amodra@gmail.com>
680 * input-scrub.c (input_scrub_next_buffer): Rearrange and simplify
681 loop. Don't drop lines at end of file lacking a newline, add a
682 newline instead. Ensure partial_size is zero whenever
683 partial_where is NULL. Adjust buffer size for extra char.
684 (input_scrub_push, input_scrub_begin): Adjust buffer size here too.
686 2015-07-20 Matthew Wahab <matthew.wahab@arm.com>
688 * NEWS: Mention corrected spelling of armv6kz.
689 * config/tc-arm.c (arm_cpus): Replace ARM_ARCH_V6ZK with
691 (arm_archs): Likewise. Also add "armv6kz" and "armv6kzt2".
692 * doc/c-arm.texi: Replace "armv6zk" with "armv6kz".
694 2015-07-16 Jiong Wang <jiong.wang@arm.com>
696 * config/tc-aarch64.c (reloc_table): New relocation modifiers.
697 (md_apply_fix): Support BFD_RELOC_AARCH64_TLSLD_ADR_PREL21.
698 (aarch64_force_relocation): Ditto.
700 2015-07-16 Matthew Wahab <matthew.wahab@arm.com>
702 * config/tc-arm.c (arm_fpus): Add crypto-neon-fp-armv8.1.
703 * doc/c-arm.texi (-mfpu=): Likewise. Correct the entry for
706 2015-07-16 James Greenhalgh <james.greenhalgh@arm.com>
708 * config/tc-arm.c (md_assemble): Rephrase the "selected processor does
709 not support ARM mode" error messages.
711 2015-07-15 H.J. Lu <hongjiu.lu@intel.com>
713 * config/tc-i386.c (flag_compress_debug): Replace
714 COMPRESS_DEBUG_GNU_ZLIB with COMPRESS_DEBUG_GABI_ZLIB.
716 2015-07-14 H.J. Lu <hongjiu.lu@intel.com>
718 * as.c (parse_args): Make --compress-debug-sections and
719 --compress-debug-sections=zlib the same as
720 --compress-debug-sections=zlib-gabi.
721 * doc/as.texinfo: Change --compress-debug-sections and
722 --compress-debug-sections=zlib to zlib-gabi.
724 2015-07-09 Catherine Moore <clm@codesourcery.com>
726 * config/tc-mips.c (check_fpabi): Handle
727 VAL_GNU_MIPS_ABI_FP_NAN2008.
729 2015-07-08 Ciro Santilli <ciro.santilli@gmail.com>
731 * doc/as.texinfo: Clarify case requirements for pseudo ops.
733 2015-07-08 Pitchumani Sivanupandi <pitchumani.s@atmel.com>
735 * config/tc-avr.c (tc_gen_reloc): Change 32 bit relocation to
736 32 bit PC relative and update offset if the fixup is pc-relative.
737 * config/tc-avr.h (DIFF_EXPR_OK): Define to enable PC relative diff
740 2015-07-03 Alan Modra <amodra@gmail.com>
742 * config/tc-ppc.c (md_show_usage): Add -m821, -m850, -m860.
743 * doc/c-ppc.texi (PowerPC-Opts): Likewise.
745 2015-07-01 Sandra Loosemore <sandra@codesourcery.com>
746 Cesar Philippidis <cesar@codesourcery.com>
748 * config/tc-nios2.c (nios2_min_align): New.
749 (nop): Replace with....
750 (nop_r1, nop_r2, nop_r2_cdx, nop32, nop16): New.
751 (nios2_align): Handle alignment on 2-byte boundaries when CDX
752 instructions may be present.
753 (s_nios2_align): Adjust reference to nop.
754 (CDXBRANCH, IS_CDXBRANCH): New.
755 (CDX_UBRANCH_SUBTYPE, CDX_CBRANCH_SUBTYPE): New.
756 (nios2_relax_subtype_size): Handle 2-byte CDX branches.
757 (nios2_relax_frag): Likewise.
758 (md_convert_frag): Handle R2 encodings.
759 (nios2_check_overflow): Check that low-order bits are zero
760 before applying rightshift from howto.
761 (nios2_check_overflow): Correct negative overflow calculation.
762 (nios2_diagnose_overflow): Handle signed_immed12_overflow. Issue
763 generic overflow messages for miscellaneous instruction formats.
764 (md_apply_fix): Recognize new R2 relocations. For pc_relative
765 relocations, store fixup in *valP.
766 (nios2_reglist_mask, nios2_reglist_dir): New.
767 (nios2_parse_reglist): New.
768 (nios2_parse_base_register): New.
769 (nios2_assemble_expression): Handle constant expressions designated
771 (nios2_assemble_reg3): New.
772 (nios2_assemble_arg_c): Handle R2 instruction formats.
773 (nios2_assemble_arg_d): Likewise.
774 (nios2_assemble_arg_s): Likewise.
775 (nios2_assemble_arg_t): Likewise.
776 (nios2_assemble_arg_D): New.
777 (nios2_assemble_arg_S): New.
778 (nios2_assemble_arg_T): New.
779 (nios2_assemble_arg_i): Handle R2 instruction formats.
780 (nios2_assemble_arg_I): New.
781 (nios2_assemble_arg_u): Handle R2 instruction formats.
782 (nios2_assemble_arg_U): New.
783 (nios2_assemble_arg_V): New.
784 (nios2_assemble_arg_W): New.
785 (nios2_assemble_arg_X): New.
786 (nios2_assemble_arg_Y): New.
787 (nios2_assemble_arg_o): Handle R2 instruction formats.
788 (nios2_assemble_arg_O): New.
789 (nios2_assemble_arg_P): New.
790 (nios2_assemble_arg_j): Handle R2 instruction formats.
791 (nios2_assemble_arg_k): New.
792 (nios2_assemble_arg_l): Handle R2 instruction formats.
793 (nios2_assemble_arg_m): Likewise.
794 (nios2_assemble_arg_M): New.
795 (nios2_assemble_arg_N): New.
796 (nios2_assemble_arg_e): New.
797 (nios2_assemble_arg_f): New.
798 (nios2_assemble_arg_g): New.
799 (nios2_assemble_arg_h): New.
800 (nios2_assemble_arg_R): New.
801 (nios2_assemble_arg_B): New.
802 (nios2_assemble_args): Handle new argument letters.
803 (nios2_consume_arg): Likewise.
804 (nios2_translate_pseudo_insn): Avoid dereferencing null pointer
806 (nios2_ps_insn_info_structs): Add nop.n.
807 (output_ubranch): Handle CDX branches.
808 (output_cbranch): Likewise.
809 (output_call): Handle R2 encodings.
810 (output_movia): Likewise.
811 (md_begin): Initialize nios2_min_align.
812 (md_assemble): Align to nios2_min_align. Adjust nios2_min_align
813 if a 16-bit instruction is seen.
814 (nios2_cons_align): Use appropriate nop pattern.
816 2015-07-01 Sandra Loosemore <sandra@codesourcery.com>
817 Cesar Philippidis <cesar@codesourcery.com>
819 * config/tc-nios2.c: Adjust includes.
820 (OPTION_MARCH): Define.
821 (md_longopts): Add -march option.
822 (nios2_architecture): New.
823 (nios2_use_arch): New.
824 (md_parse_option): Handle OPTION_MARCH.
825 (md_show_usage): Document -march.
826 (md_begin): Set arch in BFD.
827 (nios2_elf_final_processing): New.
828 * config/tc-nios2.h (elf_tc_final_processing): Define.
829 (nios2_elf_final_processing): New.
830 * doc/c-nios2.texi (-march): Add documentation.
832 2015-06-30 Amit Pawar <Amit.Pawar@amd.com>
834 * config/tc-i386.c (cpu_arch): Add .mwaitx.
835 (process_immext): Check operands for monitorx/mwaitx instructions.
836 * doc/c-i386.texi: Document mwaitx.
838 2015-06-28 H.J. Lu <hongjiu.lu@intel.com>
840 * as.c (parse_args): Replace COMPRESS_DEBUG_ZLIB with
841 COMPRESS_DEBUG_GNU_ZLIB.
842 * config/tc-i386.c (flag_compress_debug): Likewise.
844 2015-06-24 H.J. Lu <hongjiu.lu@intel.com>
846 * doc/as.texinfo (.cfi_lsda): Remove the extra @section.
848 2015-06-19 Peter Bergner <bergner@vnet.ibm.com>
850 * config/tc-ppc.c (md_assemble): Use ppc_optional_operand_value.
851 Allow for optional operands without insert functions.
853 2015-06-18 Nick Clifton <nickc@redhat.com>
856 * config/tc-arm.c (md_apply_fix): Add support for ADR in thumb
857 mode against a nearby symbol.
859 2015-06-18 Nick Clifton <nickc@redhat.com>
862 * config/tc-arm.c (tc_gen_reloc): Include BFD_RELOC_ARM_TLS_LE32
863 in the same case as BFD_RELOC_ARM_TLS_IS32.
865 2015-06-17 Nick Clifton <nickc@redhat.com>
867 * config/tc-arm.c (is_double_a_single): Make conditional upon the
868 availablity of a 64-bit type. Use this type for the argument and
870 (double_to_single): Likewise.
871 * config/tc-arm.c (move_or_literal_pool): Use a 64-bit type for
872 the constant value, if available. Generate a 64-bit value from a
873 bignum if supported. Only perform the second optimization for
874 PR 18500 if the 64-bit type is available.
876 2015-06-17 Alessandro Marzocchi <alessandro.marzocchi@gmail.com>
879 * config/tc-arm.c (is_double_a_single): New function.
880 (double_to_single): New function.
881 (move_or_literal_pool): Add support for converting VLDR to VMOV.
884 * config/tc-arm.c (move_or_literal_pool): Add support for LDR Rx,=
885 to MOV.w or MVN.w for Thumb2.
887 2015-06-17 Nicolas Pitre <nico@linaro.org>
889 * as.c (show_usage): Document --sectname-subst.
890 (parse_args): Add --sectname-subst.
891 * as.h (flag_sectname_subst): New.
892 * config/obj-elf.c (obj_elf_section_name): Add %S substitution.
893 * doc/as.texinfo: Document it.
895 2015-06-15 Renlin Li <renlin.li@arm.com>
897 * config/tc-aarch64.c (reloc_table): New relocation modifier.
898 (md_apply_fix): Support BFD_RELOC_AARCH64_LD64_GOTOFF_LO15.
899 (aarch64_force_relocation): Ditto
901 2015-06-13 Mark Wielaard <mjw@redhat.com>
903 * dwarf2dbg.c (out_header): Document EXPR->X_add_number value,
904 out_debug_aranges depends on it.
905 (out_debug_aranges): Track size of header to properly pad header
906 for address alignment.
908 2015-06-11 John David Anglin <danglin@gcc.gnu.org>
911 * gas/config/tc-hppa.c (last_label_symbol): Declare.
912 (pa_get_label): Return last label in current space/segment or NULL.
913 (pa_define_label): Record last label and add to root.
914 (pa_undefine_label): Remove last label from root.
916 2015-06-08 Nick Clifton <nickc@redhat.com>
918 * config/tc-rx.c (rx_op): Correct handling of integer bignums.
920 2015-06-04 Matthew Wahab <matthew.wahab@arm.com>
922 * NEWS: Mention ARMv8.1 support in the Aarch64 port.
923 * config/tc-aarch64.c (aarch64_arch_option_table): Add "armv8.1-a".
924 * doc/c-aarch64.texi (-march): Add "armv8.1-a".
926 2015-06-04 Renlin Li <renlin.li@arm.com>
928 * config/tc-arm.c (arm_init_frag): Use frag's thumb_mode information
931 2015-06-04 Nick Clifton <nickc@redhat.com>
933 * config/tc-h8300.c (md_section_align): Fix compile time warning
934 about left shifting a negative value.
936 2015-06-03 Matthew Wahab <matthew.wahab@arm.com>
938 * config/tc-arm.c (arm_archs): Add "armv8.1-a".
939 * doc/c-arm.texi (ARM Options, -march): Add "armv8.1-a".
940 * NEWS: Mention ARMv8.1 support.
942 2015-06-02 Matthew Wahab <matthew.wahab@arm.com>
944 * config/tc-arm.c (arm_ext_pan): New.
945 (do_setpan): New, encode an ARM SETPAN instruction.
946 (do_t_setpan): New, encode a Thumb SETPAN instruction.
947 (insns): Add "setpan".
948 (arm_extensions): Add "pan".
949 * doc/c-arm.texi (ARM Options): Add "pan" to list of -mcpu processor
952 2015-06-02 Matthew Wahab <matthew.wahab@arm.com>
954 * config/tc-aarch64.c (aarch64_features): Add "rdma".
955 * doc/c-aarch64.texi (AArch64 Extensions): Add "rdma".
957 2015-06-02 Matthew Wahab <matthew.wahab@arm.com>
959 * config/tc-aarch64.c (aarch64_features): Add "lor".
960 * doc/c-aarch64.c (Aarch64 Extensions): Add "lor" to list of
961 architecture extensions.
963 2015-06-01 Matthew Wahab <matthew.wahab@arm.com>
965 * config/tc-aarch64.c (parse_sys_reg): New parameter. Check target
966 support. Fix whitespace.
967 (parse_operands): Update for parse_sys_reg changes.
968 (aarch64_features): Add "pan".
969 * doc/c-aarch64.texi (Aarch64 Extensions): Add "pan".
971 2015-06-01 Jiong Wang <jiong.wang@arm.com>
973 * config/tc-aarch64.c (reloc_table): New relocation modifiers.
974 (md_apply_fix): Support BFD_RELOC_AARCH64_LD32_GOTPAGE_LO14.
975 (aarch64_force_relocation): Ditto.
977 2015-06-01 Jiong Wang <jiong.wang@arm.com>
979 * config/tc-aarch64.c (reloc_table): New relocation modifiers.
980 (md_apply_fix): Support BFD_RELOC_AARCH64_LD64_GOTPAGE_LO15.
981 (aarch64_force_relocation): Ditto.
983 2015-05-28 Catherine Moore <clm@codesourcery.com>
984 Bernd Schmidt <bernds@codesourcery.com>
985 Paul Brook <paul@codesourcery.com>
988 * config/tc-alpha.c (all_cfi_sections): Declare.
989 (s_alpha_ent): Initialize all_cfi_sections.
990 (alpha_elf_md_end): Invoke cfi_set_sections.
991 * config/tc-mips.c (md_apply_fix): Handle BFD_RELOC_NONE.
992 (s_ehword): Use BFD_RELOC_32_PCREL.
993 (mips_fix_adjustable): Handle BFD_RELOC_32_PCREL.
994 (mips_cfi_reloc_for_encoding): New function.
995 * tc-mips.h (DWARF2_FDE_RELOC_SIZE): Redefine.
996 (DWARF2_FDE_RELOC_ENCODING): Define.
997 (tc_cfi_reloc_for_encoding): Define.
998 (mips_cfi_reloc_for_encoding): Define.
999 (tc_compact_eh_opcode_stop): Define.
1000 (tc_compact_eh_opcode_pad): Define.
1001 * doc/as.texinfo: Document Compact EH extensions.
1002 * doc/internals.texi: Likewise.
1003 * dw2gencfi.c (EH_FRAME_LINKONCE): Redefine.
1004 (tc_cfi_reloc_for_encoding): Provide default.
1005 (compact_eh): Declare.
1006 (emit_expr_encoded): New function.
1007 (get_debugseg_name): Add Compact EH support.
1008 (alloc_debugseg_item): Likewise.
1009 (cfi_set_sections): New function.
1010 (dot_cfi_fde_data): New function.
1011 (dot_cfi_personality_id): New function.
1012 (dot_cfi_inline_lsda): New function.
1013 (cfi_pseudo_table): Add cfi_fde_data, cfi_personality_id,
1014 and cfi_inline_lsda.
1015 (dot_cfi_personality): Add Compact EH support.
1016 (dot_cfi_lsda): Likewise.
1017 (dot_cfi_sections): Likewise.
1018 (dot_cfi_startproc): Likewise.
1019 (get_cfi_seg): Likewise.
1020 (output_compact_unwind_data): New function.
1021 (output_cfi_insn): Add Compact EH support.
1022 (output_cie): Likewise.
1023 (output_fde): Likewise.
1024 (cfi_finish): Likewise.
1025 (cfi_emit_eh_header): New function.
1026 (output_eh_header): New function.
1027 * dw2gencfi.h (cfi_set_sections): Declare.
1028 (SUPPORT_COMPACT_EH): Define.
1029 (MULTIPLE_FRAME_SECTIONS): Define.
1030 New enumeration to describe the Compact EH header format.
1031 (fde_entry): Add new fields personality_id, eh_header_type, eh_data_size,
1032 eh_data, eh_loc and sections.
1033 (CFI_EMIT_eh_frame, CFI_EMIT_debug_frame, CFI_EMIT_target,
1034 CFI_EMIT_eh_frame_compact): Define.
1036 2015-05-26 Max Filippov <jcmvbkbc@gmail.com>
1038 * config/tc-xtensa.c (xtensa_move_literals): Check that
1039 search_frag is non-NULL. Report error if literal frag is not
1042 2015-05-22 Nick Clifton <nickc@redhat.com>
1045 * read.c (output_big_sleb128): Use U suffix to prevent compile
1048 2015-05-19 Jiong Wang <jiong.wang@arm.com>
1050 * config/tc-aarch64.c (process_movw_reloc_info): Sort relocation case
1051 labels alphabetically.
1052 (md_apply_fix): Ditto.
1053 (aarch64_force_relocation): Ditto.
1055 2015-05-15 H.J. Lu <hongjiu.lu@intel.com>
1058 * config/tc-i386.c (OPTION_MAMD64): New.
1059 (OPTION_MINTEL64): Likewise.
1060 (md_longopts): Add -mamd64 and -mintel64.
1061 (md_parse_option): Handle OPTION_MAMD64 and OPTION_MINTEL64.
1062 (md_show_usage): Add -mamd64 and -mintel64.
1063 * doc/c-i386.texi: Document -mamd64 and -mintel64.
1065 2015-05-15 H.J. Lu <hongjiu.lu@intel.com>
1067 * config/tc-i386.c (shared): New.
1068 (OPTION_MSHARED): Likewise.
1069 (elf_symbol_resolved_in_segment_p): Add relocation argument.
1070 Check PLT relocations and shared.
1071 (md_estimate_size_before_relax): Pass fragP->fr_var to
1072 elf_symbol_resolved_in_segment_p.
1073 (md_longopts): Add -mshared.
1074 (md_show_usage): Likewise.
1075 (md_parse_option): Handle OPTION_MSHARED.
1076 * doc/c-i386.texi: Document -mshared.
1078 2015-05-14 H.J. Lu <hongjiu.lu@intel.com>
1080 * write.c (compress_debug): Don't write the zlib header, which
1081 is handled by bfd_update_compression_header.
1083 2015-05-13 Max Filippov <jcmvbkbc@gmail.com>
1085 * config/tc-xtensa.c (xtensa_relax_frag): Allow trampoline to be
1086 closer than J_RANGE / 2 to jump frag.
1088 2015-05-11 H.J. Lu <hongjiu.lu@intel.com>
1090 * configure.tgt (arch): Set to iamcu for i386-*-elfiamcu target.
1091 * config/tc-i386.c (i386_mach): Support iamcu.
1092 (i386_target_format): Likewise.
1094 2015-05-11 H.J. Lu <hongjiu.lu@intel.com>
1096 * config/tc-i386.c (cpu_arch): Add iamcu.
1097 (i386_align_code): Handle PROCESSOR_IAMCU.
1098 (i386_arch): Likewise.
1099 (i386_mach): Likewise.
1100 (i386_target_format): Likewise.
1101 (valid_iamcu_cpu_flags): New function.
1102 (check_cpu_arch_compatible): Only allow Intel MCU instructions
1103 when targeting Intel MCU.
1104 (set_cpu_arch): Call valid_iamcu_cpu_flags to check if CPU flags
1105 are valid for Intel MCU.
1106 (md_parse_option): Likewise.
1107 * tc-i386.h (ELF_TARGET_IAMCU_FORMAT): New.
1108 (processor_type): Add PROCESSOR_IAMCU.
1109 * doc/c-i386.texi: Document iamcu.
1111 2015-05-08 Nick Clifton <nickc@redhat.com>
1114 * config/tc-arm.h (TC_EQUAL_IN_INSN): Define.
1115 * config/tc-arm.c (arm_tc_equal_in_insn): New function. Move
1116 the symbol name checking code to here from...
1117 (md_undefined_symbo): ... here.
1119 2015-05-07 H.J. Lu <hongjiu.lu@intel.com>
1121 * config/tc-i386.c (elf_symbol_resolved_in_segment_p): New.
1122 (md_estimate_size_before_relax): Use it.
1124 2015-05-06 Jose E. Marchesi <jose.marchesi@oracle.com>
1126 * config/tc-sparc.c: Typo in comment fixed.
1128 2015-05-06 Jose E. Marchesi <jose.marchesi@oracle.com>
1130 * config/tc-sparc.c (sparc_ip): Support the %ncc "natural"
1132 * doc/c-sparc.texi (Sparc-Regs): Document %ncc.
1134 2015-05-06 Nick Clifton <nickc@redhat.com>
1136 * doc/as.texinfo (Dollar Local Labels): Note that these are only
1137 supported on some targets.
1139 2015-05-06 Renlin Li <renlin.li@arm.com>
1141 * config/tc-aarch64.c (mapping_state): Recording alignment before exit.
1143 2015-05-05 Renlin Li <renlin.li@arm.com>
1145 * config/tc-aarch64.c (aarch64_init_frag): Always generate mapping
1148 2015-05-05 Nick Clifton <nickc@redhat.com>
1150 * config/tc-msp430.c (MAX_OP_LEN): Increase to 4096.
1151 (msp430_make_init_symbols): New function.
1152 (msp430_section): Call it.
1153 (msp430_frob_section): Likewise.
1155 2015-05-02 Max Filippov <jcmvbkbc@gmail.com>
1157 * config/tc-xtensa.c (cached_fixupS, fixup_cacheS): New typedefs.
1158 (struct cached_fixup, struct fixup_cache): New structures.
1159 (fixup_order, xtensa_make_cached_fixup),
1160 (xtensa_realloc_fixup_cache, xtensa_cache_relaxable_fixups),
1161 (xtensa_find_first_cached_fixup, xtensa_delete_cached_fixup),
1162 (xtensa_add_cached_fixup): New functions.
1163 (xtensa_relax_frag): Cache fixups pointing at potentially
1164 oversized jumps at the beginning of every relaxation pass. Only
1165 check subset of this cache in the reach of single jump from the
1166 trampoline frag currently being relaxed.
1168 2015-05-01 Nick Clifton <nickc@redhat.com>
1170 * config/rl78-parse.y (MULU): Remove ISA_G14.
1171 (MULH, DIVHU, DIVWU, MACHI, MACH): Update error strings.
1173 2015-05-01 H.J. Lu <hongjiu.lu@intel.com>
1175 * config/tc-i386.c (i386_elf_emit_arch_note): Removed.
1176 * config/tc-i386.h (md_end): Likewise.
1177 (i386_elf_emit_arch_note): Likewise.
1179 2015-05-01 H.J. Lu <hongjiu.lu@intel.com>
1181 * configure.tgt: Support i386-*-elf*.
1183 2015-04-30 DJ Delorie <dj@redhat.com>
1185 * config/rl78-defs.h (rl78_isa_g10): New.
1186 (rl78_isa_g13): New.
1187 (rl78_isa_g14): New.
1188 * config/rl78-parse.y (ISA_G10): New.
1191 (MULHU, MULH, MULU, DIVHU, DIVWU, MACHU, MACH): Use them.
1192 * config/tc-rl78.c (rl78_isa_g10): New.
1193 (rl78_isa_g13): New.
1194 (rl78_isa_g14): New.
1196 2015-04-30 H.J. Lu <hongjiu.lu@intel.com>
1198 * config/tc-i386.c (i386_target_format): Use "else if" on
1201 2015-04-30 Nick Clifton <nickc@redhat.com>
1204 * config/tc-arm.c (md_undefined_symbol): Issue a warning message
1205 (if enabled) when the user creates a symbol with the same name as
1207 (flag_warn_syms): New static variable.
1208 (arm_opts): Add mwarn-syms and mno-warn-syms.
1209 * doc/c-arm.texi (ARM Options): Document the -m[no-]warn-syms
1213 * doc/as.texinfo (Zero): Add documentation of the .zero pseudo-op.
1215 2015-04-29 Nick Clifton <nickc@redhat.com>
1218 * config/tc-arm.c (encode_arm_cp_address): Issue an error message
1219 if the operand is neither a register nor a vector.
1221 2015-04-29 Nick Clifton <nickc@redhat.com>
1223 * doc/as.texinfo (Set): Note that a symbol cannot be set multiple
1224 times if the expression is not constant and the target uses linker
1227 2015-04-28 Renlin Li <renlin.li@arm.com>
1229 * config/tc-arm.c (arm_init_frag): Always emit mapping symbols.
1231 2015-04-28 Nick Clifton <nickc@redhat.com>
1234 * cond.c (s_if): Stop compile time warning about stopc being used
1238 2015-04-27 Renlin Li <renlin.li@arm.com>
1240 * config/tc-aarch64.c (s_aarch64_inst): Don't align code for non-text
1242 (md_assemble): Likewise, move the align code outside the loop.
1244 2015-04-24 Jim Wilson <jim.wilson@linaro.org>
1246 * config/tc-aarch64.c (aarch64_cpus): Add CRC and CRYPTO features
1249 2015-04-24 Richard Earnshaw <rearnsha@arm.com>
1251 * config/tc-arm.h (arm_min): New function.
1252 (SUB_SEGMENT_ALIGN): Define.
1254 2015-04-23 Matthew Fortune <matthew.fortune@imgtec.com>
1256 * config/tc-mips.c (macro): State the recommended way of creating
1257 32-bit or 64-bit addresses.
1259 2015-04-23 Jan Beulich <jbeulich@suse.com>
1261 * config/tc-i386.c (match_mem_size): Also allow no size
1262 specification when broadcasting.
1264 2015-04-20 H.J. Lu <hongjiu.lu@intel.com>
1266 * doc/as.texinfo (Bundle directives): Shorten menu entry and
1268 (CFI directives): Use @subsection.
1269 (SH-Dependent, SH64-Dependent): Moved after SCORE-Dependent.
1270 * doc/c-i386.texi (i386-Mnemonics): Use @subsection.
1272 2015-04-17 Senthil Kumar Selvaraj <senthil_kumar.selvaraj@atmel.com>
1274 * config/tc-avr.c (create_record_for_frag): Rename link to
1277 2015-04-15 H.J. Lu <hongjiu.lu@intel.com>
1280 --compress-debug-sections=[none|zlib|zlib-gnu|zlib-gabi].
1282 2015-04-14 H.J. Lu <hongjiu.lu@intel.com>
1284 * as.h (compressed_debug_section_type): Removed.
1286 2015-04-14 Nick Clifton <nickc@redhat.com>
1288 * config/tc-rl78.h (TC_LINKRELAX_FIXUP): Define.
1289 (TC_FORCE_RELOCATION_SUB_SAME): Define.
1290 (DWARF2_USE_FIXED_ADVANCE_PC): Define.
1292 2015-04-10 Nick Clifton <nickc@redhat.com>
1295 * doc/c-arm.texi (ARM Options): Add a note about the interaction of
1296 the -EB option with the linker's --be8 option.
1298 2015-04-09 Hans-Peter Nilsson <hp@axis.com>
1300 * doc/c-rx.texi: Fix markup typos in last change.
1302 2015-04-09 Nick Clifton <nickc@redhat.com>
1304 * config/tc-rx.c (enum options): Add OPTION_DISALLOW_STRING_INSNS.
1305 (md_longopts): Add -mno-allow-string-insns.
1306 (md_parse_option): Handle -mno-allow-string-insns.
1307 (md_show_usage): Mention -mno-allow-string-insns.
1308 (rx_note_string_insn_use): New function. Produces an error
1309 message if a string insn is used when it is not allowed.
1310 * config/rx-parse.y (SCMPU): Call rx_note_string_insn_use.
1311 (SMOVU, SMOVB, SMOVF, SUNTIL, SWHILE, RMPA): Likewise.
1312 * config/rx-defs.h (rx_note_string_insn_use): Prototype.
1313 * doc/c-rx.texi: Document -mno-allow-string-insns.
1315 2015-04-08 H.J. Lu <hongjiu.lu@intel.com>
1317 * as.c (show_usage): Update --compress-debug-sections.
1318 (std_longopts): Use optional_argument on compress-debug-sections.
1319 (parse_args): Handle
1320 --compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}.
1321 * as.h (compressed_debug_section_type): New.
1322 (flag_compress_debug): Change type to compressed_debug_section_type.
1323 --compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}.
1324 * write.c (compress_debug): Set BFD_COMPRESS_GABI for
1325 --compress-debug-sections=zlib-gabi. Call
1326 bfd_get_compression_header_size to get compression header size.
1327 Don't rename section name for --compress-debug-sections=zlib-gabi.
1328 * config/tc-i386.c (compressed_debug_section_type): Set to
1329 COMPRESS_DEBUG_ZLIB.
1330 * doc/as.texinfo: Document
1331 --compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}.
1333 2015-04-07 Renlin Li <renlin.li@arm.com>
1335 * config/tc-aarch64.c (mapping_state): Use subseg_text_p.
1336 (s_aarch64_inst): Likewise.
1337 (md_assemble): Likewise.
1339 2015-04-06 H.J. Lu <hongjiu.lu@intel.com>
1341 * write.c (compress_debug): Use bfd_putb64 to write uncompressed
1344 2015-04-05 H.J. Lu <hongjiu.lu@intel.com>
1346 * write.c (compress_debug): Don't write the zlib header if
1347 compressed section size is the same as before compression.
1349 2015-04-02 Nick Clifton <nickc@redhat.com>
1352 * config/tc-microblaze.c (parse_imm): Use offsetT as the type for
1353 min and max parameters. Sign extend values before testing.
1355 2015-04-02 Renlin Li <renlin.li@arm.com>
1357 * config/tc-aarch64.c (mapping_state): Emit MAP_DATA within text section in order.
1358 (mapping_state_2): Don't emit MAP_DATA here.
1359 (s_aarch64_inst): Align frag during state transition.
1360 (md_assemble): Likewise.
1362 2015-04-02 Ed Maste <emaste@freebsd.org>
1364 * config/tc-aarch64.c (set_error_kind): Delete.
1365 (set_error_message): Delete.
1367 2015-04-02 H.J. Lu <hongjiu.lu@intel.com>
1369 * configure: Regenerated.
1371 2015-04-01 Evandro Menezes <e.menezes@samsung.com>
1373 * config/tc-aarch64.c: Add support for Samsung Exynos M1.
1374 * doc/c-aarch64.texi (-mcpu=): Add "exynos-m1".
1376 2015-04-01 Evandro Menezes <e.menezes@samsung.com>
1378 * config/tc-arm.c: Add support for Samsung Exynos M1.
1379 * doc/c-arm.texi (-mcpu=): Add "exynos-m1".
1381 2015-04-01 H.J. Lu <hongjiu.lu@intel.com>
1383 * configure: Regenerated.
1385 2015-03-31 Ed Schouten <ed@nuxi.nl>
1387 * configure.tgt (fmt): Set to elf for *-*-cloudabi*.
1389 2015-03-31 H.J. Lu <hongjiu.lu@intel.com>
1391 * configure.ac: Revert the AM_ZLIB change.
1392 * Makefile.in: Regenerated.
1393 * aclocal.m4: Likewise.
1394 * configure: Likewise.
1396 2015-03-31 H.J. Lu <hongjiu.lu@intel.com>
1398 * Makefile.am (ZLIBINC): New.
1399 (AM_CFLAGS): Add $(ZLIBINC).
1400 * as.c: (show_usage): Don't check HAVE_ZLIB_H.
1401 (parse_args): Likewise.
1402 * compress-debug.c: Don't check HAVE_ZLIB_H to include <zlib.h>.
1403 (compress_init): Don't check HAVE_ZLIB_H.
1404 (compress_data): Likewise.
1405 (compress_finish): Likewise.
1406 * configure.ac (AM_ZLIB): Removed.
1407 (zlibinc): New. AC_SUBST.
1408 Add --with-system-zlib.
1409 * Makefile.in: Regenerated.
1410 * config.in: Likewise.
1411 * configure: Likewise.
1412 * doc/Makefile.in: Likewise.
1414 2015-03-27 H.J. Lu <hongjiu.lu@intel.com>
1416 * config/tc-i386.c (cpu_flags_set): Removed.
1418 2015-03-25 Renlin Li <renlin.li@arm.com>
1420 * config/tc-aarch64.c (mapping_state): Remove first MAP_DATA emitting
1422 (mapping_state_2): Emit first MAP_DATA symbol here.
1424 2015-03-24 H.J. Lu <hongjiu.lu@intel.com>
1427 * write.c (compress_debug): Don't write the zlib header if
1428 compression didn't make the section smaller.
1430 2015-03-24 Terry Guo <terry.guo@arm.com>
1432 * config/tc-arm.c (no_cpu_selected): Use new macro to compare
1434 (parse_psr): Likewise.
1435 (do_t_mrs): Likewise.
1436 (do_t_msr): Likewise.
1437 (static const arm_feature_set arm_ext_*): Defined with new macros.
1438 (static const arm_feature_set arm_cext_*): Likewise.
1439 (static const arm_feature_set fpu_fpa_ext_*): Likewise.
1440 (static const arm_feature_set fpu_vfp_ext_*): Likewise.
1441 (deprecated_coproc_regs): Likewise.
1442 (UL_BARRIER): Likewise.
1443 (barrier_opt_names): Likewise.
1444 (arm_cpus): Likewise.
1445 (arm_extensions): Likewise.
1447 2015-03-20 H.J. Lu <hongjiu.lu@intel.com>
1449 * config/tc-i386.c (i386_align_code): Limit multi-byte nop
1450 instructions to 10 bytes.
1452 2015-03-19 Nick Clifton <nickc@redhat.com>
1454 * config/tc-rl78.c (enum options): Add G13 and G14.
1455 (md_longopts): Add -mg13 and -mg14.
1456 (md_parse_option): Handle -mg13 and -mg14.
1457 (md_show_usage): List -mg13 and -mg14.
1458 * doc/c-rl78.texi: Add description of -mg13 and -mg14 options.
1460 2015-03-18 Jon Turney <jon.turney@dronecode.org.uk>
1461 Nick Clifton <nickc@redhat.com>
1464 * doc/as.texinfo: Note that when gas compresses debug sections the
1465 compression is only performed if it makes the section smaller.
1466 * write.c (compress_debug): Do not compress a debug section if
1467 doing so would make it larger.
1469 2015-03-17 Ganesh Gopalasubramanian <Ganesh.Gopalasubramanian@amd.com>
1471 * config/tc-i386.c (cpu_arch): Add PROCESSOR_ZNVER flags.
1472 (i386_align_code): Add PROCESSOR_ZNVER cases.
1473 * config/tc-i386.h (processor_type): Add PROCESSOR_ZNVER.
1474 * doc/c-i386.texi: Add znver1 and clzero.
1476 2015-03-16 Nick Clifton <nickc@redhat.com>
1478 * dwarf2dbg.c (out_header): Remove spurious #if 1.
1480 2015-03-13 Jiong Wang <jiong.wang@arm.com>
1482 * config/tc-aarch64.c (warn_unpredictable_ldst): Don't warn on reg
1485 2015-03-13 Jiong Wang <jiong.wang@arm.com>
1487 * config/tc-aarch64.h (SUB_SEGMENT_ALIGN): Define to be zero.
1489 2015-03-12 Andrew Bennett <andrew.bennett@imgtec.com>
1491 * config/tc-mips.c (mips_cpu_info_table): Add i6400 entry.
1492 * doc/c-mips.texi: Document i6400 -march option.
1494 2015-03-12 Nick Clifton <nickc@redhat.com>
1497 * config/tc-arm.h (MD_APPLY_SYM_VALUE): Pass the current segment
1498 to arm_apply_sym_value. Update prototype.
1499 * config/tc-arm.c (arm_apply_sym_value): Add segment argument.
1500 Do not apply the value if the symbol is in a different segment to
1501 the current segment.
1503 2015-03-11 Alan Modra <amodra@gmail.com>
1505 * config/tc-ppc.c (md_assemble): Don't abort on 8 byte insn fixups.
1506 (md_apply_fix): Report an error on data-only fixups used with insns.
1508 2015-03-10 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
1510 * config/tc-s390.c (md_gather_operands): Check for valid
1511 length field operands.
1513 2015-03-10 Michael Perkins <perkinsmg75@yahoo.co.uk>
1515 * config/tc-arm.c (parse_operands): Fix bug setting writeback
1516 values for '^' on OP_REGLSTs.
1517 (do_push_pop): Add new writeback constraint.
1519 2015-03-10 Renlin Li <renlin.li@arm.com>
1521 * config/tc-arm.c (mapping_state): Remove first MAP_DATA emitting code.
1522 (mapping_state_2): Emit first MAP_DATA symbol here.
1524 2015-03-10 Matthew Wahab <matthew.wahab@arm.com>
1526 * config/tc-aarch64.c (mapping_state): Set minimum alignment for
1529 2015-03-10 Nick Clifton <nickc@redhat.com>
1532 * config/tc-arm.c (md_begin): Ensure that selected_cpu is
1533 initialised when CPU_DEFAULT is defined.
1535 2015-03-05 Nick Clifton <nickc@redhat.com>
1537 * config/tc-v850.c (md_parse_option): Fix code to set or clear
1538 EF_RH850_DATA_ALIGN8 bit in ELF header, based upon the use of the
1539 -m8byte-align and -m4byte-align command line options.
1541 2015-03-04 Richard Sandiford <richard.sandiford@arm.com>
1544 * config/tc-aarch64.c (process_movw_reloc_info): Allow
1545 R_AARCH64_TLSLE_MOVW_TPREL_G0_NC and R_AARCH64_TLSLE_MOVW_TPREL_G1_NC
1548 2015-02-28 Alan Modra <amodra@gmail.com>
1550 * write.c (SUB_SEGMENT_ALIGN): Don't pad non-code sections at
1551 end to their alignment.
1553 2015-02-19 Marcus Shawcroft <marcus.shawcroft@arm.com>
1555 * config/tc-aarch64.c (reloc_table_entry): Generate
1556 BFD_RELOC_AARCH64_TLSDESC_ADR_PREL21.
1557 (md_apply_fix, aarch64_force_relocation): Handle
1558 BFD_RELOC_AARCH64_TLSGD_ADR_PREL21.
1560 2015-02-19 Marcus Shawcroft <marcus.shawcroft@arm.com>
1562 * config/tc-aarch64.c (reloc_table_entry): Generate
1563 BFD_RELOC_AARCH64_TLSGD_ADR_PREL21.
1564 (md_apply_fix, aarch64_force_relocation): Handle
1565 BFD_RELOC_AARCH64_TLSGD_ADR_PREL21.
1567 2015-02-19 Marcus Shawcroft <marcus.shawcroft@arm.com>
1569 * config/tc-aarch64.c (reloc_table_entry): Generate
1570 BFD_RELOC_AARCH64_TLSIE_LD_GOTTPREL_PREL19.
1571 (md_apply_fix, aarch64_force_relocation): Handle
1572 BFD_RELOC_AARCH64_TLSIE_LD_GOTTPREL_PREL19.
1574 2015-02-26 Marcus Shawcroft <marcus.shawcroft@arm.com>
1576 * config/tc-aarch64.c (reloc_table_entry): Add ld_literal_type.
1577 (reloc_table): Likewise.
1578 (parse_address_main): Use ld_literal_type.
1580 2015-02-26 Marcus Shawcroft <marcus.shawcroft@arm.com>
1582 * config/tc-aarch64.c (reloc_table_entry): Add adr_type.
1583 (reloc_table): Likewise.
1584 (parse_address_main): Use adr_type.
1586 2015-02-26 Marcus Shawcroft <marcus.shawcroft@arm.com>
1588 * config/tc-aarch64.c (aarch64_arch_any, aarch64_arch_node): Remove.
1590 2015-02-25 Andrew Burgess <andrew.burgess@embecosm.com>
1592 * config/tc-avr.c: Add elf32-avr.h include.
1593 (struct avr_property_record_link): New structure.
1594 (avr_output_property_section_header): New function.
1595 (avr_record_size): New function.
1596 (avr_output_property_record): New function.
1597 (avr_create_property_section): New function.
1598 (avr_handle_align): New function.
1599 (exclude_section_from_property_tables): New function.
1600 (create_record_for_frag): New function.
1601 (append_records_for_section): New function.
1602 (avr_create_and_fill_property_section): New function.
1603 (avr_post_relax_hook): New function.
1604 * config/tc-avr.h (md_post_relax_hook): Define.
1605 (avr_post_relax_hook): Declare.
1606 (HANDLE_ALIGN): Define.
1607 (avr_handle_align): Declare.
1608 (strut avr_frag_data): New structure.
1609 (TC_FRAG_TYPE): Define.
1611 2015-02-25 Matthew Wahab <matthew.wahab@arm.com>
1613 * doc/c-arm.texi (-mcpu=): Add cortex-a53, cortex-a57 and
1616 2015-02-24 Nick Clifton <nickc@redhat.com>
1618 * config/tc-v850.c (soft_float): New variable.
1619 (v850_data_8): New variable.
1620 (md_show_usage): Add -msoft-float/-mhard-float.
1621 (md_parse_option): Likewise.
1622 (md_begin): Set the default value of soft_float.
1623 (v850_md_end): New function. Creates a note section.
1624 * config/tc-v850.h (md_end): Define.
1625 * doc/c-v850.texi: Document -msoft-float/-mhard-float.
1627 2015-02-23 Yoshinori Sato <ysato@users.sourceforge.jp>
1629 * config/tc-h8300.c (line_separater_chars): Add a version for
1630 h8300-linux that includes a separator.
1631 (default_mach): New variable.
1633 (md_longopts): Add '--march' option.
1634 (md_parse_option): Parse the new option.
1635 * config/tc-h8300.h (TARGET_FORMAT): Add elf32-h8300-linux.
1636 * configure.tgt: Add h8300-*-linux
1637 * doc/c-h8300.texi: Document --march.
1639 2015-02-23 Nick Clifton <nickc@redhat.com>
1642 * dwarf2dbg.c (out_header): When generating dwarf sections use
1643 real symbols not temps for the start and end symbols.
1644 * config/tc-msp430.h (TC_FORCE_RELOCATION_SUB_SAME): Also prevent
1645 adjustments to relocations in debug sections.
1646 (TC_LINKRELAX_FIXUP): Likewise.
1648 2015-02-19 Alan Modra <amodra@gmail.com>
1650 * doc/as.texinfo (Local Symbol Names): Don't use ':' in pxref.
1651 * doc/c-i386.texi: Reorder i386-Bugs after i386-Arch.
1653 2015-02-11 Matthew Wahab <matthew.wahab@arm.com>
1655 * config/tc-aarch64.c (aarch64_cpus): Fix code formatting.
1657 2015-02-11 Matthew Wahab <matthew.wahab@arm.com>
1659 * config/tc-arm.c: Add support for Cortex-A72.
1661 2015-02-09 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
1663 * config/tc-arm.c (warn_deprecated_sp): Use as_tsktsk instead
1664 of as_warn for deprecation messages.
1665 (encode_arm_addr_mode_2): Likewise.
1666 (check_obsolete): Likewise.
1667 (do_rd_rm_rn): Likewise.
1668 (do_co_reg): Likewise.
1669 (do_setend): Likewise.
1670 (do_t_mov_cmp): Likewise.
1671 (do_neon_ldr_str): Likewise.
1672 (opcode_lookup): Likewise.
1673 (if_fsm_post_encode): Likewise.
1674 (md_assemble): Likewise.
1676 2015-02-06 Jan Beulich <jbeulich@suse.com>
1678 * dw2gencfi.c (select_cie_for_fde): Also bail on CFI_label.
1679 (cfi_change_reg_numbers): Also do nothing for CFI_label.
1680 (cfi_pseudo_table): Also handle .cfi_label when not supporting
1683 2015-02-05 Alan Modra <amodra@gmail.com>
1685 * config/tc-msp430.c (md_assemble): Correct size passed to
1686 extract_cmd. Remove index check.
1688 2015-02-04 Matthew Wahab <matthew.wahab@arm.com>
1690 * config/tc-aarch64.c (aarch64_cpus): Add support for Cortex-A72.
1691 * doc/c-aarch64.texi (-mcpu=): Add "cortex-a72".
1693 2015-02-04 Nick Clifton <nickc@redhat.com>
1695 * config/rl78-parse.y (addsubw): Fix encoding of [HL] variant of
1698 2015-02-03 Renlin Li <renlin.li@arm.com>
1700 * doc/c-aarch64.texi (.arch): Document the directive.
1701 (.arch_extension): Likewise.
1703 2015-02-03 Nick Clifton <nickc@redhat.com>
1705 * config/tc-rl78.h (TC_PARSE_CONS_EXPRESSION): Define.
1707 2015-01-28 James Bowman <james.bowman@ftdichip.com>
1709 * Makefile.am: Add FT32 files.
1710 * config/tc-ft32.c: New file.
1711 * config/tc-ft32.h: New file.
1712 * configure.tgt: Add FT32 support.
1713 * Makefile.in: Regenerate.
1714 * po/POTFILES.in: Regenerate.
1716 2015-01-27 Kuan-Lin Chen <kuanlinchentw@gmail.com>
1718 * config/tc-nds32.c (do_pseudo_la_internal): Limit the second argument
1719 of instruction la to a symbol.
1721 2015-01-27 Kuan-Lin Chen <kuanlinchentw@gmail.com>
1723 * config/tc-nds32.c (nds32_parse_name): Ignore when the input is
1726 2015-01-19 Alan Modra <amodra@gmail.com>
1728 * read.c (s_reloc): Match BFD_RELOC_NONE, BFD_RELOC{8,16,32,64}.
1729 * write.c (get_frag_for_reloc): Allow match just past end of frag.
1731 2015-01-16 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
1733 * config/tc-s390.c (struct pd_reg): Remove.
1734 (pre_defined_registers): Remove.
1735 (REG_NAME_CNT): Remove.
1736 (reg_name_search): Calculate the register number instead of doing
1738 (register_name, tc_s390_regname_to_dw2regnum): Adopt to the new
1739 reg_name_search signature.
1740 (s390_parse_cpu): Support the new arch string z13.
1741 (s390_insert_operand): Support for vector registers with the extra
1742 field for the fifth bit of each vector register operand.
1743 (md_gather_operand): Adjust to the new handling of optional
1746 * doc/as.texinfo: Document the z13 cpu string.
1748 2015-01-13 Matthew Wahab <matthew.wahab@arm.com>
1750 * config/tc-arm.c (parse_ifimm_zero): Accept #0x0 as a synonym for
1751 #0, restoring previous behaviour.
1753 2015-01-12 Jan Beulich <jbeulich@suse.com>
1755 * gas/dw2gencfi.c (cfi_add_label, dot_cfi_label): New.
1756 (cfi_pseudo_table): Add "cfi_label".
1757 (output_cfi_insn): Handle CFI_label.
1758 (select_cie_for_fde): Als terminate CIE when encountering
1760 * dw2gencfi.h (cfi_add_label): Declare.
1761 (struct cfi_insn_data): New member "sym_name".
1763 * read.c (read_symbol_name): Drop "static".
1764 * read.h (read_symbol_name): Declare.
1766 2015-01-12 Jan Beulich <jbeulich@suse.com>
1768 * gas/config/tc-arm.c (do_neon_shl_imm): Check immediate range.
1769 (do_neon_qshl_imm): Likewise.
1771 2015-01-12 Alan Modra <amodra@gmail.com>
1773 * read.c (s_altmacro, s_reloc): Make definition static.
1775 2015-01-10 Andrew Burgess <andrew.burgess@embecosm.com>
1777 * config/tc-avr.c (md_apply_fix): Update the contents of VALP for
1780 2015-01-09 Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
1782 * config/tc-arm.c (arm_cpus): Add support for APM X-Gene 1 and
1784 * doc/c-arm.texi (ARM Options): Mention xgene1 and xgene2.
1786 2015-01-07 Jan Beulich <jbeulich@suse.com>
1788 * config/tc-arm.c (struct arm_option_extension_value_table):
1789 Split field "value" into fields "merge_value" and "clear_value".
1790 (arm_extensions): Adjust initializer accordingly.
1792 2015-01-01 Alan Modra <amodra@gmail.com>
1794 * as.c (parse_args): Just print current year.
1796 2015-01-01 Alan Modra <amodra@gmail.com>
1798 Update year range in copyright notice of all files.
1800 For older changes see ChangeLog-2014
1802 Copyright (C) 2015 Free Software Foundation, Inc.
1804 Copying and distribution of this file, with or without modification,
1805 are permitted in any medium without royalty provided the copyright
1806 notice and this notice are preserved.
1812 version-control: never