1 2007-10-24 H.J. Lu <hongjiu.lu@intel.com>
3 * configure.in: Move AM_PROG_LIBTOOL after AC_GNU_SOURCE.
4 * configure: Regenerated.
6 2007-10-24 Alan Modra <amodra@bigpond.net.au>
8 * Makefile.am (INCLUDES, DEP_INCLUDES): Remove -D_GNU_SOURCE.
10 * configure.in: Invoke AC_GNU_SOURCE.
11 * Makefile.in: Regenerate.
12 * config.in: Regenerate.
13 * configure: Regenerate.
15 2007-10-19 Nick Clifton <nickc@redhat.com>
17 * expr.c (expr): Test md_allow_local_subtract (if defined) before
18 allowing the evaluation of an expression involving two symbols
19 defined in the same section.
20 * doc/internals.texi (md_allow_local_subtract): Document the new
22 * config/tc-mn10300.h (md_allow_local_subtract): Define.
23 (RELAX_EXPANSION_POSSIBLE): Define.
24 (MAX_RELOC_EXPANSION): Define.
25 (TC_FRAG_TYPE): Define.
26 * config/tc-mn10300.c (md_assemble): Mark fragments as containing code.
27 (tc_gen_reloc): Return an array of relocs. If necessary generate
28 two relocs to handle an expressions involving the difference of
30 (mn10300_fix_adjustable): Do not test TC_FORCE_RELOCATION_LOCAL
31 when then fixup is not pc-relative.
32 (mn10300_allow_local_subtract): New function. Determine when it
33 is safe to compute the difference between two symbols at assemble
36 2007-10-19 Alan Modra <amodra@bigpond.net.au>
38 * config/tc-ppc.c (ppc_parse_name): Skip leading '%'.
39 (md_assemble): When parsing PPC_OPERAND_CR, add '%' to set of
40 chars that can start a name.
42 2007-10-18 Carlos O'Donell <carlos@systemhalted.org>
44 * config/tc-hppa.c (pa_ip): Fix comment typo.
47 2007-10-18 Nick Clifton <nickc@redhat.com>
50 * config/tc-arc.c (md_estimate_size_before_relax): Change error
52 (md_convert_frag): Just call abort.
53 * config/tc-i860.c (md_estimate_size_before_relax): Change error
55 * config/tc-i860.h (md_convert_frag): Just call abort.
56 * config/tc-ip2k.c (md_estimate_size_before_relax): Change error
58 (md_convert_frag): Just call abort.
59 * config/tc-m68k.c (m68k_ip): Do not attempt translation of
62 * config/tc-arm.c: Fix formatting and spelling errors.
64 * config/tc-xc16x.c: Fix formatting and internationalization.
65 * po/gas.pot: Regenerate.
67 2007-10-17 Nick Clifton <nickc@redhat.com>
70 * as.h (ieee_md_atof, vax_md_atof): New prototypes.
71 * read.c (s_float_space): Allow a zero length return from md_atof
72 if the error message has been set.
73 (float_cons): Likewise.
74 * config/atof-ieee.c (ieee_md_atof): New function. Performs the
75 md_atof() function in a generic way for IEEE using targets.
76 * config/atof-vax.c (md_atof): Rename to vax_md_atof. Use the
77 same error message as ieee_md_atof.
78 * tc-alpha.c (md_atof): Use ieee_md_atof. Remove #define of vax_md_atof.
79 * tc-arc.c (md_atof): Use ieee_md_atof.
80 * tc-arm.c (md_atof): Use sizeof (LITTLENUM_TYPE) instead of the
81 constant 2. Use a precision of 5 for the 'x' and 'p' types.
82 * tc-avr.c (md_atof): Use ieee_md_atof.
83 * tc-bfin.c (md_atof): Use ieee_md_atof.
84 * tc-cr16.c (md_atof): Use ieee_md_atof.
85 * tc-crx.c (md_atof): Use ieee_md_atof.
86 * tc-d10v.c (md_atof): Use ieee_md_atof.
87 * tc-d30v.c (md_atof): Use ieee_md_atof.
88 * tc-dlx.c (md_atof): Use ieee_md_atof.
89 * tc-fr30.c (md_atof): Use ieee_md_atof.
90 * tc-frv.c (md_atof): Use ieee_md_atof.
91 * tc-h8300.c (md_atof): Use ieee_md_atof.
92 * tc-hppa.c (md_atof): Use ieee_md_atof.
93 * tc-i370.c (md_atof): Use ieee_md_atof.
94 (i370_dc): Convert the 'E' type to 'f' before calling md_atof.
95 * tc-i386.c (md_atof): Use ieee_md_atof.
96 * tc-i860.c (md_atof): Use ieee_md_atof.
97 * tc-i960.c (md_atof): Use ieee_md_atof.
98 * tc-ia64.c (md_atof): Use the same error message as ieee_md_atof.
99 * tc-ip2k.c (md_atof): Use ieee_md_atof.
100 * tc-iq2000.c (md_atof): Use ieee_md_atof.
101 * tc-m32c.c (md_atof): Use ieee_md_atof.
102 * tc-m32r.c (md_atof): Use ieee_md_atof.
103 * tc-m68hc11.c (md_atof): Use ieee_md_atof.
104 * tc-m68k.c (md_atof): Use ieee_md_atof.
105 * tc-maxq.c (md_atof): Use ieee_md_atof.
106 * tc-mcore.c (md_atof): Use ieee_md_atof.
107 * tc-mep.c (md_atof): Use ieee_md_atof.
108 * tc-mips.c (md_atof): Use ieee_md_atof.
109 * tc-mmix.c (md_atof): Use ieee_md_atof.
110 * tc-mn10200.c (md_atof): Use ieee_md_atof.
111 * tc-mn10300.c (md_atof): Use ieee_md_atof.
112 * tc-msp430.c (md_atof): Use ieee_md_atof.
113 * tc-mt.c (md_atof): Use ieee_md_atof.
114 * tc-ns32k.c (md_atof): Use ieee_md_atof.
115 * tc-openrisc.c (md_atof): Use ieee_md_atof.
116 * tc-or32.c (md_atof): Use ieee_md_atof.
117 * tc-pdp11.c (md_atof): New function. Call vax_md_atof.
118 * tc-pj.c (md_atof): Use ieee_md_atof.
119 * tc-ppc.c (md_atof): Use ieee_md_atof.
120 * tc-s390.c (md_atof): Use ieee_md_atof.
121 * tc-score.c (md_atof): Use ieee_md_atof.
122 * tc-sh.c (md_atof): Use ieee_md_atof.
123 * tc-sparc.c (md_atof): Use ieee_md_atof.
124 * tc-spu.c (md_atof): Use ieee_md_atof.
125 * tc-tic30.c (md_atof): Use the same error message as ieee_md_atof.
126 * tc-tic4x.c (md_atof): Use the same error message as ieee_md_atof.
127 * tc-tic54.c (md_atof): Use ieee_md_atof.
128 * tc-v850.c (md_atof): Use ieee_md_atof.
129 * tc-vax.c (md_atof): New function. Call vax_md_atof.
130 * tc-xc16x.c (md_atof): Use ieee_md_atof.
131 * tc-xstormy16.c (md_atof): Use ieee_md_atof.
132 * tc-xtensa.c (md_atof): Use ieee_md_atof.
133 * tc-z8k.c (md_atof): Use ieee_md_atof.
134 * doc/internals.texi: Update description of md_atof function.
135 * po/gas.pot: Regenerate.
137 2007-10-16 Bob Wilson <bob.wilson@acm.org>
139 * doc/as.texinfo (Overview): Add Xtensa --rename-section option.
141 2007-10-16 Nick Clifton <nickc@redhat.com>
143 * config/obj-elf.c (obj_elf_type): Accept "common" as a valid
145 * doc/as.texinfo (.type): Document the types accepted by the
146 type pseudo op, including "common".
148 2007-10-15 Peter Bergner <bergner@vnet.ibm.com>
150 * config/tc-ppc.c (ppc_setup_opcodes): Verify instructions are sorted
151 according to major opcode number.
153 2007-10-15 Alan Modra <amodra@bigpond.net.au>
155 * read.c (do_s_func): Check asprintf return status.
156 * stabs.c (stabs_generate_asm_func): Likewise.
157 (stabs_generate_asm_endfunc): Likewise.
159 2007-10-12 H.J. Lu <hongjiu.lu@intel.com>
161 * config/tc-i386.c (process_operands): Simplify implicit xmm0
164 2007-10-12 H.J. Lu <hongjiu.lu@intel.com>
166 * config/tc-i386.c (process_operands): Check the firstxmm0
167 field in opcode_modifier for instruction with a implicit
168 xmm0 as the first operand.
170 2007-10-12 Eric B. Weddington <eweddington@cso.atmel.com>
172 * config/tc-avr.c (mcu_types): Add new devices: AT90PWM2B,
174 * doc/c-avr.texi: Document new devices.
176 2007-10-12 M R Swami Reddy <MR.Swami.Reddy@nsc.com>
178 * config/tc-cr16.c: Update the md_relax_table for 1 word b<cc>
179 instruction range information.
181 2007-10-12 Daniel Jacobowitz <dan@codesourcery.com>
183 * doc/as.texinfo (Object Attributes): New chapter.
184 (Pseudo Ops): Document .gnu_attribute.
185 (LNS directives): Correct .loc_mark_labels documentation.
187 2007-10-11 Nick Clifton <nickc@redhat.com>
189 * config/obj-elf.c (obj_elf_section): When pushing a section, if
190 there is a comma then the following argument must be a subsection
193 2007-10-11 H.J. Lu <hongjiu.lu@intel.com>
195 * doc/c-i386.texi: Update which instruction's operands are
198 2007-10-11 Nick Clifton <nickc@redhat.com>
201 * config/tc-ia64.c: Allow for translations of error and warning
203 * po/gas.pot: Regenerate.
206 * config/tc-h8300.c (tc_gen_reloc): Allow for translation of error
208 * po/gas.pot: Regenerate.
211 * config/tc-msp430.c: Fix spelling typos.
213 2007-10-11 Nick Clifton <nickc@redhat.com>
215 * doc/as.texinfo (Type): Fix typo: STT_FUNC not STT_FUNCTION.
217 2007-10-08 Maciej W. Rozycki <macro@linux-mips.org>
219 * config/tc-mips.c (AT): Rename to...
221 (AT): New definition.
222 (mips_set_options): Rename "noat" to "at"; change the type.
223 (mips_opts): Update accordingly.
224 (append_insn): Likewise.
225 (macro_build_ldst_constoffset): Likewise.
226 (load_address): Likewise.
227 (macro, macro2): Likewise.
228 (s_mipsset): Handle ".set at=REG". Update handling of ".set at"
231 2007-10-08 Nick Clifton <nickc@redhat.com>
233 * doc/as.texinfo (Previous): Clarify explanation of the behaviour
234 of this pseudo-op and add a couple of examples.
236 2007-10-08 Nick Clifton <nickc@redhat.com>
238 PR gas/5121 gas/5122 gas/5123
239 * Makefile.am (CFILES): Add cgen.c
240 (TARGET_CPU_CFILES): Add tc-iq2000.c, tc-maxq.c, tc-mt.c,
241 tc-tic4x.c and xtensa-relax.c.
242 (TARGET_CPU_HFILES): Add tc-iq2000.h, tc-maxq.h, tc-mt.h,
243 tc-tic4x.h and xtensa-relax.h.
244 (TARG_ENV_HFILES): Remove te-aux.h, te-delta.h, te-delt88.h,
245 te-ic960.h, te-linux.h. Add te-aix5.h, te-armeabi.h,
246 te-freebsd.h, te-gnu.h, te-interix.h, te-vxworks.h.
247 (CONFIG_ATOF_CFILES): New variable.
248 (POTFILES): Add CONFIG_ATOF_CFILES to dependencies. Fix typo with
249 dependency upon TARG_ENV_HFILES.
250 (DEPTC): Do not put "#include opcodes/<foo>-desc.h" into
251 cgen-desc.h when foo-desc.h does not exit.
253 * Makefile.in: Regenerate.
254 * doc/Makefile.in: Regenerate.
255 * po/POTFILES.in: Regenerate.
257 * po/es.po: Regenerate.
258 * po/fr.po: Regenerate.
259 * po/gas.pot: Regenerate.
260 * po/rw.po: Regenerate.
261 * po/tr.po: Regenerate.
262 * config/obj-elf.c (obj_elf_vtable_inherit): Allow for translation
265 * config/obj-som.c: Likewise.
267 * config/tc-arc.c: Likewise.
269 * config/tc-arm.c: Likewise.
271 * config/tc-bfin.c: Likewise.
273 * config/tc-frv.c: Likewise.
275 * config/tc-dlx.c: Likewise.
277 2007-10-08 Eric B. Weddington <eweddington@cso.atmel.com>
279 * config/tc-avr.c (mcu_types): Add new devices: ATtiny43U,
280 ATtiny48, AT90PWM216, AT90PWM316.
281 * doc/c-avr.texi: Document new devices.
283 2007-10-08 Nick Clifton <nickc@redhat.com>
286 * config/tc-arm.c (md_apply_fix): Correct error message.
288 * config/tc-arm.c (md_apply_fix): Likewise.
290 * config/tc-bfin.c (md_apply_fix): Fix error message.
292 (Expr_Node_Gen_Reloc_R): Fix spelling typos in error messages.
294 2007-10-05 H.J. Lu <hongjiu.lu@intel.com>
296 * config/tc-i386.c (build_modrm_byte): Check the first 2 8bit
297 immediate operands directly for instructions with 4 operands.
299 2007-10-04 H.J. Lu <hongjiu.lu@intel.com>
302 * config/tc-i386.c (process_suffix): Clear QWORD suffix if it
303 is ignored in Intel mode.
305 2007-10-04 Helge Deller <deller@gmx.de>
307 * read.c (potable): Add string8, string16, string32 and string64.
308 Add bit size for stringer function.
309 (stringer_append_char): New.
310 (stringer): Use stringer_append_char().
311 * config/obj-coff.c (obj_coff_ident): Add bit size for stringer function.
312 * config/obj-elf.c (obj_elf_ident): Likewise.
313 * config/tc-alpha.c (s_alpha_stringer): Likewise.
314 * config/tc-dlx.c (dlx_pseudo_table): Likewise.
315 * config/tc-hppa.c (pa_stringer): Likewise.
316 * config/tc-ia64.c (md_pseudo_table, pseudo_opcode): Likewise.
317 * config/tc-m68hc11.c (md_pseudo_table): Likewise.
318 * config/tc-mcore.c (md_pseudo_table): Likewise.
319 * config/tc-mips.c (mips_pseudo_table): Likewise.
320 * config/tc-spu.c (md_pseudo_table): Likewise.
321 * config/tc-s390.c (md_pseudo_table): Likewise. Replace '2' by '1'.
322 * doc/as.texinfo (ABORT): Fix identing.
323 (String): Document new string8, string16, string32, string64
325 * NEWS: Mention the new feature.
327 2007-10-03 Nick Clifton <nickc@redhat.com>
330 * config/tc-avr.c (avr_get_constant): Extend error message to
331 mention that the constant must be positive.
333 2007-10-03 Nick Clifton <nickc@redhat.com>
335 * config/tc-avr.c (avr_get_constant):
337 * config/tc-arm.c (s_arm_unwind_handlerdata): Fix spelling typo.
339 (md_assemble): Fix spelling typo.
341 2007-10-03 Alan Modra <amodra@bigpond.net.au>
344 * stabs.c (aout_process_stab): Set BSF_DEBUGGING.
346 2007-10-01 M R Swami Reddy <MR.Swami.Reddy@nsc.com>
348 * config/tc-cr16.c: Replaced 'tabs' with white spaces and
349 added R_CR16_DISP8 as default reloc type for b<cc> instructions.
351 2007-09-30 H.J. Lu <hongjiu.lu@intel.com>
354 * config/tc-i386.c (check_long_reg): Also handle cvttss2si.
355 (check_qword_reg): Also handle cvttsd2si.
357 2007-09-27 Kazu Hirata <kazu@codesourcery.com>
359 * config/m68k-parse.h (m68k_register): Use MBO instead of MBB.
360 (last_movec_reg): Change to MBO.
361 * config/tc-m68k.c (fido_ctrl): Use MBO instead of MBB.
362 (m68k_ip): Use MBO instead of MBO.
363 (init_table): Use MBO instead of MBO. Add an entry for mbo.
365 2007-09-26 Jan Beulich <jbeulich@novell.com>
367 * config/tc-i386.c (build_modrm_byte): Also check for RegEip
368 when considering IP-relative addressing.
370 2007-09-26 Jan Beulich <jbeulich@novell.com>
372 * config/tc-i386.h (md_register_arithmetic): Define.
373 * config/tc-ia64.h (md_register_arithmetic): Likewise.
374 * doc/internals.texi: Document md_register_arithmetic.
375 * expr.c (make_expr_symbol): Force O_register expressions into
377 (expr): Provide default for md_register_arithmetic. Don't resolve
378 adding/subtracting constants to/from registers if
379 md_register_arithmetic is zero.
381 2007-09-26 Jan Beulich <jbeulich@novell.com>
383 * dw2gencfi.c: Conditionalize whole body upon TARGET_USE_CFIPOP.
384 (cfi_finish): Add second empty instance.
386 2007-09-26 Jan Beulich <jbeulich@novell.com>
388 * config/tc-ia64.c (dot_pred_rel): Replace specialized handling
389 with simple call to parse_operand.
391 2007-09-26 Jan Beulich <jbeulich@novell.com>
393 * config/tc-i386.c (NUM_FLAG_CODE): Remove.
395 2007-09-26 Jan Beulich <jbeulich@novell.com>
397 * as.c (itbl_parse): Remove #define.
398 (struct itbl_file_list): Move down and ...
399 (itbl_files): .. conditionalize upon HAVE_ITBL_CPU.
400 (show_usage): Conditionalize printing of --itbl option upon
402 (parse_args): Conditionalize handling of -t/--itbl options upon
403 HAVE_ITBL_CPU. Remove OPTION_INSTTBL and replace its use with
406 2007-09-25 H.J. Lu <hongjiu.lu@intel.com>
408 * config/tc-i386.c (output_insn): Use i.tm.opcode_length to
411 2007-09-25 Nathan Sidwell <nathan@codesourcery.com>
413 * config/tc-m68k.c (LONG_BRANCH_VIA_COND): New.
414 (BRANCHBWPL, FRAG_VAR_SIZE): New.
415 (md_relax_table): Add BRANCHBWPL entries.
416 (m68k_ip): Choose BRANCHBWPL relaxation if necessary.
417 (md_assemble): Use FRAG_VAR_SIZE.
418 (md_convert_frag_1): Add BRANCHBWPL cases.
419 (md_estimate_size_before_relaz): Likewise.
421 2007-09-24 Carlos O'Donell <carlos@codesourcery.com>
423 * config/tc-mips.c (s_align): Set max_alignment to 28.
425 2007-09-20 H.J. Lu <hongjiu.lu@intel.com>
428 * config/tc-i386.c (SCALE1_WHEN_NO_INDEX): Removed.
429 (set_allow_index_reg): New.
430 (allow_index_reg): Likewise.
431 (md_pseudo_table): Add "allow_index_reg" and
432 "disallow_index_reg".
433 (build_modrm_byte): Set i.sib.index to NO_INDEX_REGISTER for
434 fake index registers.
435 (i386_scale): Updated.
436 (i386_index_check): Support fake index registers.
437 (parse_real_register): Return NULL on eiz/riz if fake index
438 registers aren't allowed.
440 2007-09-19 Nick Clifton <nickc@redhat.com>
442 * config/tc-h8300.c (md_apply_fix): Do not abort or handle 8 byte
445 2007-09-19 Bob Wilson <bob.wilson@acm.org>
447 * doc/c-xtensa.texi (Xtensa Immediate Relaxation): Fix "addi" typo.
449 2007-09-18 Bernd Schmidt <bernd.schmidt@analog.com>
451 * config/bfin-parse.y (asm_1): Slightly improve error messages
454 2007-09-18 Alan Modra <amodra@bigpond.net.au>
457 * read.c (emit_expr): Only use long long if required and available.
459 2007-09-17 H.J. Lu <hongjiu.lu@intel.com>
461 * config/tc-i386.c (baseindex): Removed.
462 (build_modrm_byte): Check reg_num for RIP register instead of
464 (i386_index_check): Likewise.
466 2007-09-17 H.J. Lu <hongjiu.lu@intel.com>
469 * config/obj-coff.c (obj_coff_endef): Remove checking size of
470 def_symbol_in_progress.
472 2007-09-17 Evandro Menezes <evandro@yahoo.com>
475 * read.c (emit_expr): Use unsigned long long values in warning
476 message about truncated expressions.
478 2007-09-17 H.J. Lu <hongjiu.lu@intel.com>
480 * config/tc-i386.c (intel_e04): Revert the last change.
482 2007-09-17 Nick Clifton <nickc@redhat.com>
484 * po/es.po: Updated Spanish translation.
486 2007-09-15 H.J. Lu <hongjiu.lu@intel.com>
489 * config/tc-i386.c (intel_e04): Return 1 if cur_token.code is
492 2007-09-14 H.J. Lu <hongjiu.lu@intel.com>
494 * config/tc-i386.c (build_modrm_byte): Adjust comment line
497 2007-09-14 H.J. Lu <hongjiu.lu@intel.com>
499 * config/tc-i386.c (build_modrm_byte): Use (A || B) instead
502 2007-09-14 H.J. Lu <hongjiu.lu@intel.com>
504 * config/tc-i386.c (build_modrm_byte): Adjust indentation.
506 2007-09-14 Michael Meissner <michael.meissner@amd.com>
507 Dwarakanath Rajagopal <dwarak.rajagopal@amd.com>
508 Tony Linthicum <tony.linthicum@amd.com>
510 * NEWS: Add SSE5 support to NEWS file.
512 * config/tc-i386.h (drex_byte): Add fields to allow process_drex
513 and build_modrm_byte to communicate.
514 (DREX_OC0): New SSE5 macro.
515 (DREX_OC0_MASK): Ditto.
517 (DREX_OC1_MASK): Ditto.
518 (DREX_XMEM_X1_X2_X2): Ditto.
519 (DREX_X1_XMEM_X2_X2): Ditto.
520 (DREX_X1_XMEM_X2_X1: Ditto.
521 (DREX_X1_X2_XMEM_X1: Ditto.
522 (DREX_XMEM_X1_X2): Ditto.
523 (DREX_X1_XMEM_X2): Ditto.
524 (drex_byte): New structure to describe the DREX byte.
526 * config/tc-i386.c (process_drex): New function to handle SSE5
528 (build_modrm_byte): Use the information cached away in
529 process_drex in the case of DREX instructions.
530 (i386_insn): Add drex field.
531 (pi): Add debugging of drex field.
532 (md_assemble): Treat SSE5 like SSE3 in instructions with an
533 immediate byte. Move REX field to DREX if this is a DREX
535 (process_operands): Add SSE5 support.
536 (build_modrm_byte): Ditto.
537 (output_insn): Ditto.
539 (i386_align_code): Ditto.
541 2007-09-12 Jan Beulich <jbeulich@novell.com>
543 * config/tc-i386.c (md_assemble): Move handling of extrq/insertq
544 after generic operand swapping, and swap only the immediate operands.
546 2007-09-11 Nathan Sidwell <nathan@codesourcery.com>
548 * config/tc-m68k.c (m68k_ip): Add mcfisa_c case.
549 (m68k_elf_final_processing): Add EF_M68K_CF_ISA_C_NODIV.
551 2007-09-09 H.J. Lu <hongjiu.lu@intel.com>
553 * tc-i386.c (output_insn): Only check SSE4.2 and ABM for 3
556 2007-09-08 H.J. Lu <hongjiu.lu@intel.com>
558 * config/tc-i386.c (cpu_flags_check_x64): Renamed to ...
559 (cpu_flags_check_cpu64): This. Inline.
560 (uints_all_zero): New.
561 (uints_set): Likewise
562 (uints_equal): Likewise
563 (UINTS_ALL_ZERO): Likewise
564 (UINTS_SET): Likewise
565 (UINTS_CLEAR): Likewise
566 (UINTS_EQUAL): Likewise
567 (cpu_flags_and): Likewise.
568 (cpu_flags_or): Likewise.
569 (operand_type_and): Likewise.
570 (operand_type_or): Likewise.
571 (operand_type_xor): Likewise.
572 (cpu_flags_not): Inline and use switch instead of loop.
573 (cpu_flags_match): Updated.
574 (operand_type_match): Likewise.
575 (smallest_imm_type): Likewise.
576 (set_cpu_arch): Likewise.
578 (md_assemble): Likewise.
579 (parse_insn): Likewise.
580 (optimize_imm): Likewise.
581 (match_template): Likewise.
582 (process_suffix): Likewise.
583 (update_imm): Likewise.
584 (finalize_imm): Likewise.
585 (process_operands): Likewise.
586 (build_modrm_byte): Likewise.
587 (i386_immediate): Likewise.
588 (i386_displacement): Likewise.
589 (i386_index_check): Likewise.
590 (i386_operand): Likewise.
591 (i386_target_format): Likewise.
592 (intel_e11): Likewise.
593 (operand_type): Remove implicitregister.
594 (operand_type_check): Updated. Inline.
595 (cpu_flags_all_zero): Removed.
596 (operand_type_all_zero): Likewise.
597 (i386_array_biop): Likewise.
598 (cpu_flags_biop): Likewise.
599 (operand_type_biop): Likewise.
601 2007-09-08 H.J. Lu <hongjiu.lu@intel.com>
603 * Makefile.am: Run "make dep-am".
604 * Makefile.in: Regenerate.
606 2007-09-08 H.J. Lu <hongjiu.lu@intel.com>
608 * configure.in (AC_CHECK_HEADERS): Add limits.h.
609 * configure: Regenerated.
610 * config.in: Likewise.
612 * config/tc-i386.c: Include "opcodes/i386-init.h".
613 (_i386_insn): Use i386_operand_type for types.
614 (cpu_arch_flags): Updated to new types with bitfield.
615 (cpu_arch_tune_flags): Likewise.
616 (cpu_arch_isa_flags): Likewise.
617 (cpu_arch): Likewise.
618 (i386_align_code): Likewise.
619 (set_code_flag): Likewise.
620 (set_16bit_gcc_code_flag): Likewise.
621 (set_cpu_arch): Likewise.
622 (md_assemble): Likewise.
623 (parse_insn): Likewise.
624 (process_operands): Likewise.
625 (output_branch): Likewise.
626 (output_jump): Likewise.
627 (parse_real_register): Likewise.
628 (mode_from_disp_size): Likewise.
629 (smallest_imm_type): Likewise.
631 (type_names): Likewise.
634 (swap_2_operands): Likewise.
635 (optimize_imm): Likewise.
636 (optimize_disp): Likewise.
637 (match_template): Likewise.
638 (check_string): Likewise.
639 (process_suffix): Likewise.
640 (check_byte_reg): Likewise.
641 (check_long_reg): Likewise.
642 (check_qword_reg): Likewise.
643 (check_word_reg): Likewise.
644 (finalize_imm): Likewise.
645 (build_modrm_byte): Likewise.
646 (output_insn): Likewise.
647 (disp_size): Likewise.
648 (imm_size): Likewise.
649 (output_disp): Likewise.
650 (output_imm): Likewise.
652 (i386_immediate): Likewise.
653 (i386_displacement): Likewise.
654 (i386_index_check): Likewise.
655 (i386_operand): Likewise.
656 (parse_real_register): Likewise.
657 (i386_intel_operand): Likewise.
658 (intel_e09): Likewise.
659 (intel_bracket_expr): Likewise.
660 (intel_e11): Likewise.
661 (cpu_arch_flags_not): New.
662 (cpu_flags_check_x64): Likewise.
663 (cpu_flags_all_zero): Likewise.
664 (cpu_flags_not): Likewise.
665 (i386_cpu_flags_biop): Likewise.
666 (cpu_flags_biop): Likewise.
667 (cpu_flags_match); Likewise.
671 (reg16_inoutportreg): Likewise.
675 (disp16_32): Likewise.
677 (baseindex): Likewise.
685 (imm16_32): Likewise.
686 (imm16_32s): Likewise.
687 (imm16_32_32s): Likewise.
688 (operand_type): Likewise.
689 (operand_type_check): Likewise.
690 (operand_type_match): Likewise.
691 (operand_type_register_match): Likewise.
692 (update_imm): Likewise.
693 (set_code_flag): Also update cpu_arch_flags_not.
694 (set_16bit_gcc_code_flag): Likewise.
695 (md_begin): Likewise.
696 (parse_insn): Use cpu_flags_check_x64 to check 64bit support.
697 Use cpu_flags_match to match instructions.
698 (i386_target_format): Update cpu_arch_isa_flags and
699 cpu_arch_tune_flags to i386_cpu_flags type with bitfield.
700 (smallest_imm_type): Check cpu_arch_tune to tune for i486.
701 (match_template): Don't initialize overlap0, overlap1,
702 overlap2, overlap3 and operand_types.
703 (process_suffix): Handle crc32 with 64bit register.
705 (CONSISTENT_REGISTER_MATCH): Likewise.
707 * config/tc-i386.h (arch_entry): Updated to i386_cpu_flags
710 2007-09-06 H.J. Lu <hongjiu.lu@intel.com>
712 * config/tc-i386.c (match_template): Handle invlpga, vmload,
713 vmrun and vmsave in SVME.
714 (process_suffix): Likewise.
716 2007-09-05 H.J. Lu <hongjiu.lu@intel.com>
718 * config/tc-i386.c (i386_index_check): Don't use RegRex
719 on the reg_type field.
720 (parse_real_register): Use `||' instead of `|'.
722 2007-09-04 H.J. Lu <hongjiu.lu@intel.com>
724 * config/tc-i386.c (process_operands): Remove segment override
725 check on SVME instructions.
726 (i386_index_check): Remove memory operand check on SVME
729 2007-09-04 Alan Modra <amodra@bigpond.net.au>
731 * config/tc-spu.c (struct spu_insn): Delete "flag". Add "reloc".
732 (md_assemble): Update init of insn. Use insn.reloc instead of
733 calculating from flag.
734 (get_imm): Set reloc rather than flag.
735 (calcop): Formatting.
737 2007-08-29 Daniel Jacobowitz <dan@codesourcery.com>
739 * dwarf2dbg.c (dwarf2_directive_loc): Emit duplicate .loc directives.
741 2007-08-28 Daniel Jacobowitz <dan@codesourcery.com>
743 * doc/c-arc.texi: Fix typo.
745 2007-08-28 H.J. Lu <hongjiu.lu@intel.com>
747 * config/tc-i386.c (process_suffix): Handle cmpxchg8b in
750 2007-08-28 Nathan Sidwell <nathan@codesourcery.com>
752 * config/tc-m68k.c (mcf52235_ctrl): Add cache registers.
753 (mcf5253_ctrl): Add RAMBAR, MBAR, MBAR2.
755 (m68k_cpus): Adjust 5407 entry.
757 2007-08-28 Maxim Kuvyrkov <maxim@codesourcery.com>
759 * config/tc-m68k.c (mcf51qe_ctrl): Define 51QE control registers.
760 (m68k_cpus): Define 51QE cpu.
762 2007-08-28 Mark Shinwell <shinwell@codesourcery.com>
763 Joseph Myers <joseph@codesourcery.com>
765 * as.c (main): Flush stderr before printing listings to ensure
766 consistent output order across platforms.
768 2007-08-28 Robert Sebastian Gerus <arachnist@gmail.com>
770 * configure.tgt: Add support for i[3-7]86-*-dragonfly*.
772 2007-08-24 Joseph Myers <joseph@codesourcery.com>
773 Paul Brook <paul@codesourcery.com>
776 * as.h (remap_debug_filename, add_debug_prefix_map): Declare.
777 * as.c (show_usage): Document --debug-prefix-map option.
778 (parse_args): Handle --debug-prefix-map.
779 * dwarf2dbg.c (out_file_list, out_debug_info): Remap debug paths.
780 * stabs.c (stabs_generate_asm_file): Remap debug paths.
781 * Makefile.am (GAS_CFILES): Add remap.c
782 (GENERIC_OBJS): Add remap.o.
783 Regenerate dependencies.
784 * Makefile.in: Regenerate.
785 * doc/as.texinfo (--debug-prefix-map): Document.
787 2007-08-24 Aurelien Jarno <aurel32@debian.org>
789 * config/tc-arm.c (md_apply_fix): Cast bfd_vma values to long
790 before printing them.
792 2007-08-24 Anders Waldenborg <anders@0x63.nu>
793 Alan Modra <amodra@bigpond.net.au>
795 * config/tc-i386.c (lex_got): Don't scan past a comma.
797 2007-08-23 Ben Elliston <bje@au.ibm.com>
799 * config/tc-ppc.c (parse_cpu): Handle "750cl".
800 (pre_defined_registers): Add "gqr0" to "gqr7", "gqr.0" to "gqr.7".
801 (md_show_usage): Document -m750cl.
802 (md_assemble): Handle two delimiters in succession (eg. `),').
803 * doc/c-ppc.texi (PowerPC-Opts): Document -m750cl.
804 * testsuite/gas/ppc/ppc.exp: Run ppc70ps dump tests.
805 * testsuite/gas/ppc/ppc750ps.s: New file.
806 * testsuite/gas/ppc/ppc750ps.d: Likewise.
808 2007-08-23 Ben Elliston <bje@au.ibm.com>
810 * doc/c-arm.texi (ARM Directives): Move brackets out of @vars.
812 2007-08-17 Alan Modra <amodra@bigpond.net.au>
815 * config/tc-i386.c (x86_cons): Complain about invalid @got etc.
817 (i386_immediate): Detect and complain about more cases of
818 invalid immediate expressions. Return failure rather than
819 converting them to zero.
820 (i386_displacement): Likewise.
822 2007-08-17 Alan Modra <amodra@bigpond.net.au>
824 * po/Make-in: Add --msgid-bugs-address to xgettext invocation.
826 2007-08-14 Andreas Schwab <schwab@suse.de>
828 * config/tc-ia64.c (tc_gen_reloc): Return NULL if relocation is
831 2007-08-12 Matthias Klose <doko@ubuntu.com>
833 * doc/Makefile.am (AM_MAKEINFOFLAGS, TEXI2DVI): Include
834 $(top_srcdir)/../../bfd/doc.
835 * doc/Makefile.in: Regenerate.
837 2007-08-10 Nick Clifton <nickc@redhat.com>
839 * NEWS: Add a marker for the 2.18 features.
841 2007-08-09 Paul Brook <paul@codesourcery.com>
843 * config/tc-arm.c (relaxed_symbol_addr): Compensate for alignment.
845 2007-08-09 H.J. Lu <hongjiu.lu@intel.com>
847 * config/tc-i386.c (check_byte_reg): Support pextrb and pinsrb.
849 2007-07-29 H.J. Lu <hongjiu.lu@intel.com>
851 * config/tc-i386.c (check_long_reg): Allow cvtss2si to convert
852 DWORD memory to Reg64 in Intel synax.
853 (check_qword_reg): Allow cvtsd2si to convert QWORD memory to
854 Reg32 in Intel syntax.
856 2007-07-25 Sterling Augustine <sterling@tensilica.com>
858 * config/tc-xtensa.c (xtensa_extui_opcode): New.
859 (xg_expand_assembly_insn): Check for invalid extui operands.
860 (md_begin): Initialize xtensa_extui_opcode.
862 2007-07-24 Nick Clifton <nickc@redhat.com>
864 * config/tc-mep.h (skip_whitespace): Remove definition.
866 2007-07-23 H.J. Lu <hongjiu.lu@intel.com>
868 * config/tc-i386.c (cpu_arch): Change i386 to PROCESSOR_I386.
871 (f32_patt): Remove f32_15.
872 (f16_patt): Likewise.
873 (i386_align_code): Updated to alt_long_patt for 64bit by
876 * config/tc-i386.h (processor_type): Add PROCESSOR_I386.
878 2007-07-23 Evandro Menezes <evandro.menezes@amd.com>
880 * config/tc-i386.c (i386_align_code): Enable alignment up to
881 MAX_MEM_FOR_RS_ALIGN_CODE bytes. Remove special treatment
884 * config/tc-i386.h (MAX_MEM_FOR_RS_ALIGN_CODE): Changed to 31.
886 2007-07-20 Nick Clifton <nickc@redhat.com>
888 * app.c (do_scrub_chars): Provide a one character buffer to hold a
889 pushed back newline at the end of an unterminated quoted string.
891 2007-07-14 Nick Clifton <nickc@redhat.com>
893 * config/tc-arm.c (create_register_alias): Return a boolean rather
895 Check the return value of insert_reg_alias and do not continue to
896 create aliases once an insertion has failed.
897 (s_unreq): Delete the all-upper-case and all-lower-case
898 alternatives as well.
900 2007-07-12 Kai Tietz <kai.tietz@onevision.com>
902 * symbols.c: Print bfd_hostptr_t to file via fprintf_vma.
905 2007-07-11 Daniel Jacobowitz <dan@codesourcery.com>
907 * config/tc-mips.c (mips_dwarf2_format, mips_dwarf2_addr_size): Use
910 2007-07-04 Richard Sandiford <richard@codesourcery.com>
912 * config/tc-mips.c (mips_cpu_info_table): Add new entries for
913 {24k,24ke,34k,74k}f{2_1,1_1,x}. Also add an entry for 74kf3_2.
914 Deprecate *x and *fx.
915 * doc/c-mips.texi: Document the new CPU arguments. Deprecate
918 2007-07-04 H.J. Lu <hongjiu.lu@intel.com>
920 * config/obj-coff.h (x86_64_target_format): Renamed to ...
921 (i386_target_format): This
922 (TARGET_FORMAT): Use i386_target_format.
924 * config/tc-i386.c (x86_64_target_format): Removed.
925 (i386_target_format): Handle PE formats.
927 2007-07-04 Nick Clifton <nickc@redhat.com>
929 * symbols.c (symbol_relc_make_value): Use bfd_sprintf_vma in order
930 to get the right length of printed value.
932 2007-07-03 Nick Clifton <nickc@redhat.com>
934 * COPYING: Replace with GPLv3 text.
935 * app.c: Update copyright notice to refer to GPLv3.
936 * as.c, as.h, asintl.h, atof_generic.c, bignum.h, bit_fix.h,
937 cgen.c, cond.c, debug.c, depend.c, dw2gencfi.c, dw2gencfi.h,
938 dwarf2dbg.c, dwarf2dbg.h, ecoff.c, ecoff.h, ehopt.c, emul.h,
939 emul_target.h, expr.c, expr.h, flonum-copy.c, flonum.h,
940 flonum-konst.c, frags.c, frags.h, hash.c, hash.h, input-file.c,
941 input-file.h, input-scrub.c, ibtl-lex.h, itbl-lex.l, itbl-ops.c,
942 itbl-ops.h, itbl-parse.y, listing.c, listing.h, literal.c,
943 macro.c, messages.c, obj.h, output-file.c, output-file.h, read.c,
944 read.h, sb.c, sb,h, stabs.c, struc-symbol.h, subsegs.c, subsegs.h,
945 symbols.c, symbols.h, tc.h, write.c, write.h, config/aout_gnu.h,
946 config/config/atof-ieee.c, config/atof-vax.c, config/bfin-aux.h,
947 config/bfin-defs.h, config/bfin-lex.l, config/bfin-parse.y,
948 config/itbl-mips.h, config/m68k-parse.h, config/m68k-parse.y,
949 config/obj-aout.c, config/obj-aout.h, config/obj-coff.c,
950 config/obj-coff.h, config/obj-ecoff.c, config/obj-ecoff.h,
951 config/obj-elf.c, config/obj-elf.h, config/obj-evax.c,
952 config/obj-evax.h, config/obj-multi.h, config/obj-som.c,
953 config/obj-som.h, config/tc-alpha.c, config/tc-alpha.h,
954 config/tc-arc.c, config/tc-arc.h, config/tc-arm.c,
955 config/tc-arm.h, config/tc-avr.c, config/tc-avr.h,
956 config/tc-bfin.c, config/tc-bfin.h, config/tc-cr16.c,
957 config/tc-cr16.h, config/tc-cris.c, config/tc-cris.h,
958 config/tc-crx.c, config/tc-crx.h, config/tc-d10v.c,
959 config/tc-d10v.h, config/tc-d30v.c, config/tc-d30v.h,
960 config/tc-dlx.c, config/tc-dlx.h, config/tc-fr30.c,
961 config/tc-fr30.h, config/tc-frv.c, config/tc-frv.h,
962 config/tc-generic.c, config/tc-generic.h, config/tc-h8300.c,
963 config/tc-h8300.h, config/tc-hppa.c, config/tc-hppa.h,
964 config/tc-i370.c, config/tc-i370.h, config/tc-i386.c,
965 config/tc-i386.h, config/tc-i860.c, config/tc-i860.h,
966 config/tc-i960.c, config/tc-i960.h, config/tc-ia64.c,
967 config/tc-ia64.h, config/tc-ip2k.c, config/tc-ip2k.h,
968 config/tc-iq2000.c, config/tc-iq2000.h, config/tc-m32c.c,
969 config/tc-m32c.h, config/tc-m32r.c, config/tc-m32r.h,
970 config/tc-m68hc11.c, config/tc-m68hc11.h, config/tc-m68k.c,
971 config/tc-m68k.h, config/tc-maxq.c, config/tc-maxq.h,
972 config/tc-mcore.c, config/tc-mcore.h, config/tc-mep.c,
973 config/tc-mep.h, config/tc-mips.c, config/tc-mips.h,
974 config/tc-mmix.c, config/tc-mmix.h, config/tc-mn10200.c,
975 config/tc-mn10200.h, config/tc-mn10300.c, config/tc-mn10300.h,
976 config/tc-msp430.c, config/tc-msp430.h, config/tc-mt.c,
977 config/tc-mt.h, config/tc-ns32k.c, config/tc-ms32k.h,
978 config/tc-openrisc.c, config/tc-openrisc.h, config/tc-or32.c,
979 config/tc-or32.h, config/tc-pdp11.c, config/tc-pdp11.h,
980 config/tc-pj.c, config/tc-pj.h, config/tc-ppc.c, config/tc-ppc.h,
981 config/tc-s390.c, config/tc-s390.h, config/tc-score.c,
982 config/tc-score.h, config/tc-sh64.c, config/tc-sh64.h,
983 config/tc-sh.c, config/tc-sh.h, config/tc-sparc.c,
984 config/tc-sparc.h, config/tc-spu.c, config/tc-spu.h,
985 config/tc-tic30.c, config/tc-tic30.h, config/tc-tic4x.c,
986 config/tc-tic4x.h, config/tc-tic54x.c, config/tc-tic54x.h,
987 config/tc-v850.c, config/tc-v850.h, config/tc-vax.c,
988 config/tc-vax.h, config/tc-xc16x.c, config/tc-x16x.h,
989 config/tc-xstormy16.c, config/tc-xstormy16.h, config/tc-xtensa.c,
990 config/tc-xtensa.h, config/tc-z80.c, config/tc-z80.h,
991 config/tc-z8k.c, config/tc-z8k.h, config/te-386bsd.h,
992 config/te-freebsd.h, config/te-hppa.h, config/te-irix.h,
993 config/te-netware.h, config/te-sparcaout.h, config/te-tmips.h,
994 config/te-vxworks.h, config/vax-inst.h, config/xtensa-istack.h,
995 config/xtensa-relax.c, config/xtensa-relax.h: Likewise.
997 * flonum-mult.c: Likewise, and also correct typo referring to
998 non-existant GNU Assembler General Public License.
999 * config/tc-m68851.h: Likewise.
1000 * NEWS: Mention the new license. Also note where the 2.17 release
1002 * config/e-crisaout.c: Add copyright header.
1003 * config/e-criself.c, config/e-i386aout.c, config/e-i386coff.c,
1004 config/e-i386elf.c, config/e-mipscoff.c, config/e-mipself.c,
1005 config/obj-multi.c, config/te-aix5.h, config/te-armeabi.h,
1006 config/te-armlinuxeabi.h, config/te-dynix.h, config/te-epoc-pe.h,
1007 config/te-generic.h, config/te-gnu.h, config/te-go32.h,
1008 config/te-hppa64.h, config/te-hppalinux64.h, config/te-hpux.h,
1009 config/te-i386aix.h, config/te-ia64aix.h, config/te-interix.h,
1010 config/te-linux.h, config/te-lnews.h, config/te-lynx.h,
1011 config/te-mach.h, config/te-macos.h, config/te-nbsd532.h,
1012 config/te-nbsd.h, config/te-pc532mach.h, config/te-pe.h,
1013 config/te-pep.h, config/te-psos.h, config/te-riscix.h,
1014 config/te-sun3.h, config/te-svr4.h, config/te-symbian.h,
1015 config/te-wince-pe.h: Likewise.
1017 2007-07-03 Nathan Sidwell <nathan@codesourcery.com>
1019 * config/tc-m68k.c (m68k_ip): Add j & K operand types.
1020 (install_operand): Add E encoding.
1021 (md_begin): Check and skip initial '.' arg character.
1022 (get_num): Add 0..511 case.
1024 2007-07-03 Alan Modra <amodra@bigpond.net.au>
1027 * config/obj-elf.c (elf_ecoff_set_ext): Make static when OBJ_MAYBE_ELF.
1028 * config/obj-elf.h (obj_ecoff_set_ext): Comment.
1030 2007-07-03 Mikkel Lauritsen <renard@nospam.dk>
1033 * app.c (do_scrub_chars <state 5>): Check for output buffer full
1036 2007-07-02 Joseph Myers <joseph@codesourcery.com>
1038 * config/tc-mips.c (s_dtprelword, s_dtpreldword,
1039 s_dtprel_internal): New.
1040 (mips_pseudo_table): Add .dtprelword and .dtpreldword.
1041 (md_apply_fix): Handle BFD_RELOC_MIPS_TLS_DTPREL32 and
1042 BFD_RELOC_MIPS_TLS_DTPREL64.
1044 2007-07-02 Alan Modra <amodra@bigpond.net.au>
1046 * Makefile.am: Run "make dep-am".
1047 * Makefile.in: Regenerate.
1048 * aclocal.m4: Regenerate.
1049 * config.in: Regenerate.
1050 * doc/Makefile.in: Regenerate.
1051 * po/POTFILES.in: Regenerate.
1052 * po/gas.pot: Regenerate.
1054 2007-07-02 Alan Modra <amodra@bigpond.net.au>
1056 * config/tc-ppc.c (ppc_pe_section): Comment out code assigning
1057 coff section flag values to bfd section flag.
1059 2007-06-30 H.J. Lu <hongjiu.lu@intel.com>
1061 * aclocal.m4: Regenerated.
1062 * doc/Makefile.in: Likewise.
1063 * Makefile.in: Likewise.
1065 2007-06-29 Joseph Myers <joseph@codesourcery.com>
1067 * as.c (main): Only call create_obj_attrs_section if IS_ELF.
1069 2007-06-29 Joseph Myers <joseph@codesourcery.com>
1071 * as.c (create_obj_attrs_section): New.
1072 (main): Call create_obj_attrs_section for ELF.
1073 * read.c (s_gnu_attribute, skip_whitespace, skip_past_char,
1074 skip_past_comma, s_vendor_attribute): New.
1075 (potable): Add gnu_attribute for ELF.
1076 * read.h (s_vendor_attribute): Declare.
1077 * config/tc-arm.c (s_arm_eabi_attribute): Replace by wrapper
1078 round s_vendor_attribute.
1079 (aeabi_set_public_attributes): Update for new attributes
1081 (arm_md_end): Remove attributes contents setting now done
1084 2007-06-29 M R Swami Reddy <MR.Swami.Redd@nsc.com>
1086 * Makefile.am: Add CR16 related entry.
1087 * Makefile.in: Regenerate.
1088 * config/tc-cr16.h: New file
1089 * config/tc-cr16.c: New file
1090 * doc/c-cr16.texi: New file for cr16
1091 * doc/all.texi: Entry for cr16
1092 * doc/Makefile.am: Added c-cr16.texi
1093 * doc/Makefile.in: Regenerate
1094 * doc/as.texinfo: Entry for CR16 target
1095 * NEWS: Announce the support for the new target.
1097 2007-06-26 Paul Brook <paul@codesourcery.com>
1099 * config/tc-arm.c (parse_operands): Accept generic coprocessor regs
1101 (reg_names): Add fpinst, pfinst2, mvfr0 and mvfr1.
1103 2007-06-25 H.J. Lu <hongjiu.lu@intel.com>
1105 * config/tc-i386.c (process_operands): Replace regKludge
1108 2007-06-25 Richard Sandiford <richard@codesourcery.com>
1110 * config/tc-mips.h (TC_SYMFIELD_TYPE): New.
1111 * config/tc-mips.c (append_insn): Record which symbols have
1112 R_MIPS16_26 relocations against them.
1113 (mips_fix_adjustable): Don't reduce relocations against such symbols.
1115 2007-06-22 Sterling Augustine <sterling@tensilica.com>
1117 * config/tc-xtensa.c (xg_assembly_relax): Comment termination rules.
1118 (frag_format_size): Handle RELAX_IMMED_STEP3.
1119 (xtensa_relax_frag, md_convert_frag): Likewise.
1120 * config/tc-xtensa.h (xtensa_relax_statesE): Add RELAX_IMMED_STEP3.
1121 (RELAX_IMMED_MAXSTEPS): Adjust.
1122 * config/xtensa-relax.c (widen_spec_list): Add transitions from
1123 wide branches to branch-over-jumps.
1124 (build_transition): Handle wide branches in transition patterns.
1126 2007-06-22 H.J. Lu <hongjiu.lu@intel.com>
1128 * config/tc-i386.c (disp_size): New.
1129 (imm_size): Likewise.
1130 (output_disp): Use disp_size and imm_size.
1131 (output_imm): Use imm_size.
1133 2007-06-19 Sterling Augustine <sterling@tensilica.com>
1135 * config/tc-xtensa.h (struct xtensa_frag_type): Update comment about
1136 use of literal_frag field.
1137 * config/tc-xtensa.c (xtensa_mark_literal_pool_location): Record frag
1138 in the literal_frag field.
1139 (xtensa_move_literals): Use it here instead of searching. Update
1140 literal_frag field with new value.
1142 2007-06-14 Paul Brook <paul@codesourcery.com>
1144 * config/tc-arm.c (do_t_mov_cmp): Handle shift by register and
1145 narrow shift by immediate.
1147 2007-06-14 H.J. Lu <hongjiu.lu@intel.com>
1149 * Makefile.am (ACLOCAL_AMFLAGS): Add -I ../config -I ../bfd.
1151 * acinclude.m4: Don't include m4 files.
1152 (BFD_BINARY_FOPEN): Removed.
1153 Remove libtool kludge.
1155 * Makefile.in: Regenerated.
1156 * doc/Makefile.in: Likewise.
1157 * aclocal.m4: Likewise.
1158 * configure: Likewise.
1160 2007-06-11 Sterling Augustine <sterling@tensilica.com>
1161 Bob Wilson <bob.wilson@acm.org>
1163 * config/tc-xtensa.c (XTENSA_PROP_INSN_NO_TRANSFORM): Renamed to...
1164 (XTENSA_PROP_NO_TRANSFORM): ...this.
1165 (frag_flags_struct): Move is_no_transform out of the insn sub-struct.
1166 (xtensa_mark_frags_for_org): New.
1167 (xtensa_handle_align): Set RELAX_ORG frag subtype for rs_org.
1168 (xtensa_post_relax_hook): Call xtensa_mark_frags_for_org.
1169 (get_frag_property_flags): Adjust reference to is_no_transform flag.
1170 (xtensa_frag_flags_combinable): Likewise.
1171 (frag_flags_to_number): Likewise. Use XTENSA_PROP_NO_TRANSFORM.
1172 * config/tc-xtensa.h (xtensa_relax_statesE): Add RELAX_ORG.
1174 2007-06-06 Paul Brook <paul@codesourcery.com>
1176 * config/tc-arm.c (s_align): Pad code sections appropriately.
1178 2007-06-05 Paul Brook <paul@codesourcery.com>
1180 * config/tc-arm.c (insns): Correct Thumb-2 ldrd/strd opcodes.
1182 2007-06-05 Nick Clifton <nickc@redhat.com>
1185 * config/tc-sparc.c (sparc_ip): Terminate tls_ops array.
1187 2007-06-05 Alan Modra <amodra@bigpond.net.au>
1189 * config/tc-spu.c (spu_cons): Use deferred_expression. Handle
1191 (tc_gen_reloc): Abort if neither addsy or subsy is set.
1192 (md_apply_fix): Don't attempt to resolve SPU_PPU relocs.
1193 * config/tc-spu.h (md_operand): Handle @ppu without sym.
1195 2007-05-31 Paul Brook <paul@codesourcery.com>
1197 * config/tc-arm.c (insns): Allow strex on M profile cores.
1199 2007-05-29 David S. Miller <davem@davemloft.net>
1200 Jakub Jelinek <jakub@redhat.com>
1203 * config/tc-sparc.c (md_apply_fix): Fix relocation overflow checks
1204 for BFD_RELOC_SPARC_WDISP16 and BFD_RELOC_SPARC_WDISP19.
1206 2007-05-29 Alan Modra <amodra@bigpond.net.au>
1208 * config/tc-spu.h: Wrap in #ifndef/#endif. Delete coff macros.
1210 2007-05-29 Alan Modra <amodra@bigpond.net.au>
1212 * config/tc-ppc.c: Convert to ISO C.
1213 * config/tc-ppc.c: Likewise.
1215 2007-05-29 Alan Modra <amodra@bigpond.net.au>
1217 * write.h (EXEC_MACHINE_TYPE): Delete.
1218 (string_byte_count, section_alignment): Delete.
1220 2007-05-28 Nathan Sidwell <nathan@codesourcery.com>
1222 * app.c (do_scrub_chars): Cope with \ at end of buffer.
1224 2007-05-26 Alan Modra <amodra@bigpond.net.au>
1226 * config/tc-ppc.c (ppc_insert_operand): Truncate sign bits in
1227 top 32 bits of 64 bit value if so doing results in passing
1228 range check. Rewrite sign extension fudges similarly. Enable
1229 fudges for powerpc64 too. Report user value if range check
1230 fails rather than fudged value. Negate PPC_OPERAND_NEGATIVE
1231 range rather than value, also to report user value on failure.
1233 2007-03-25 Paul Brook <paul@codesourcery.com>
1235 * config/tc-arm.c (T2_SUBS_PC_LR): Define.
1236 (do_t_add_sub): Correctly encode subs pc, lr, #const.
1237 (do_t_mov_cmp): Correctly encode movs pc, lr.
1239 2007-05-24 Steve Ellcey <sje@cup.hp.com>
1241 * Makefile.in: Regnerate.
1242 * configure: Regenerate.
1243 * aclocal.m4: Regenerate.
1244 * doc/Makefile.in: Regenerate.
1246 2007-05-22 Bob Wilson <bob.wilson@acm.org>
1248 * doc/c-xtensa.texi (Xtensa Automatic Alignment): Remove statements
1249 and index entries about automatic alignment of ENTRY instructions.
1251 2007-05-22 Nick Clifton <nickc@redhat.com>
1253 * doc/as.texinfo: Use @copying around the copyright notice.
1255 2007-05-18 Joseph Myers <joseph@codesourcery.com>
1257 * config/tc-mips.c (s_mipsset): Use generic s_set for directives
1260 2007-05-17 H.J. Lu <hongjiu.lu@intel.com>
1263 2003-06-05 Michal Ludvig <mludvig@suse.cz>
1264 * doc/as.texinfo: Document new directives: .cfi_restore,
1265 .cfi_undefined, .cfi_same_value, .cfi_return_column,
1266 .cfi_remember_state and .cfi_restore_state.
1268 2007-05-17 Nathan Sidwell <nathan@codesourcery.com>
1270 * config/tc-m68k.c (md_apply_fix): Show value of out of range
1271 fixups in error message.
1272 (md_conver_frag_1): Propagate the fix source location and use
1273 as_bad_where rather than fatal, for better error messages.
1275 2007-05-16 Paul Brook <paul@codesourcery.com>
1277 * config/tc-arm.c (v7m_psrs): Add uppercase PSR names and xpsr.
1279 2007-05-15 Mark Shinwell <shinwell@codesourcery.com>
1281 * app.c (do_scrub_chars): Don't damage \@ pseudo-variables.
1283 2007-05-15 Vincent Riviere <vincent.riviere@freesbee.fr>
1286 * config/tc-m68k.c (relaxable_symbol): Make sure that the correct
1287 addend is stored for relocs against weak symbols.
1288 (md_apply_fix): So not loose track of addend for relocs against
1291 2007-05-14 Thiemo Seufer <ths@mips.com>
1293 * config/tc-mips.c (md_parse_option): Fix parsing of -O option.
1295 2007-05-14 Mei Ligang <ligang@sunnorth.com.cn>
1297 * config/tc-score.c (data_op2, validate_immediate): Fix bug for
1298 addri, addri.c, subi, and subi.c when immediate number is hex.
1299 (score_insns): Remove subis and subis.c.
1300 (do_sub_rdi16): Delete.
1302 2007-05-11 Alan Modra <amodra@bigpond.net.au>
1304 * config/tc-spu.c (md_pseudo_table): Add int, long, quad. Call
1306 (md_assemble): Tidy use of insn.flag.
1307 (get_imm): Likewise. Handle uppercase input too.
1308 (spu_cons): New function.
1309 * config/tc-spu.h (tc_fix_adjustable): Don't adjust SPU_PPU relocs.
1310 (TC_FORCE_RELOCATION): Don't resolve them either.
1312 2007-05-05 Mark Shinwell <shinwell@codesourcery.com>
1314 * config/tc-arm.c (md_apply_fix): Generate more accurate
1315 diagnostic when 8-bit immediate range is exceeded for
1316 BFD_RELOC_ARM_OFFSET_IMM8.
1318 2007-05-04 Alan Modra <amodra@bigpond.net.au>
1321 * config/tc-i386.c (lex_got): Don't replace the reloc token with
1322 a space if we already have a space.
1324 2007-05-03 H.J. Lu <hongjiu.lu@intel.com>
1326 * config/tc-i386.c (match_template): Don't explicitly check
1327 suffix for crc32 in Intel mode.
1328 (process_suffix): Issue an error for crc32 if the operand size
1331 2007-05-03 Vincent Riviere <vincent.riviere@freesbee.fr>
1332 Nick Clifton <nickc@redhat.com>
1335 * config/tc-m68k.c (relaxable_symbol): Do not relax weak symbols.
1336 (tc_gen_reloc): Adjust the addend of relocs against weak symbols.
1337 (md_apply_fix): Put zero values into the frags referencing weak
1340 2007-05-02 Alan Modra <amodra@bigpond.net.au>
1343 * config/tc-ppc.c (ppc_insert_operand): Don't increase min for
1346 2007-05-01 H.J. Lu <hongjiu.lu@intel.com>
1348 * config/tc-i386.c (match_template): Check suffix for crc32 in
1350 (process_suffix): Default the suffix of 8bit crc32 to
1352 (check_byte_reg): Skip check for 8bit crc32.
1354 2007-04-30 H.J. Lu <hongjiu.lu@intel.com>
1356 * config/tc-i386.c (md_assemble): Use register_prefix in
1357 error/warning message.
1358 (check_byte_reg): Likewise.
1359 (check_long_reg): Likewise.
1360 (check_qword_reg): Likewise.
1361 (check_word_reg): Likewise.
1362 (process_operands): Likewise.
1364 2007-04-30 Alan Modra <amodra@bigpond.net.au>
1367 * config/tc-ppc.c (ppc_insert_operand): Disable range check if
1370 2007-04-28 Thiemo Seufer <ths@networkno.de>
1372 * config/tc-mips.c: Fix comment.
1374 2007-04-26 Anatoly Sokolov <aesok@post.ru>
1376 * config/tc-avr.c (mcu_types): Add support for atmega8hva and
1377 atmega16hva devices. Move at90usb82 device to 'avr5' architecture.
1378 * doc/c-avr.texi: Document new devices.
1380 2007-04-24 Alan Modra <amodra@bigpond.net.au>
1382 * Makefile.am: Run "make dep-am".
1383 * Makefile.in: Regenerate.
1385 2007-04-23 Nathan Sidwell <nathan@codesourcery.com>
1387 * config/tc-m68k.c (mcf54455_ctrl): New.
1388 (HAVE_LONG_DISP, HAVE_LONG_CALL, HAVE_LONG_COND): New.
1389 (m68k_archs): Add isac.
1390 (m68k_cpus): Add 54455 family.
1391 (m68k_ip): Split Bg into Bb, Bs, Bg.
1392 (m68k_elf_final_processing): Add ISA_C.
1393 * doc/c-m68k.texi (M680x0 Options): Add isac.
1395 2007-04-22 Alan Modra <amodra@bigpond.net.au>
1397 * read.c (read_a_source_file): Skip multiple spaces to
1398 cover hack in mmix md_start_line_hook which overwrites a
1399 colon with a space. Delete sermon and needless assertion.
1401 2007-04-21 Alan Modra <amodra@bigpond.net.au>
1403 * config/atof-vax.c (atof_vax_sizeof): Change return type to unsigned.
1404 (md_atof): Make number_of_chars unsigned. Revert last change.
1405 * config/tc-or32.c (md_apply_fix): Delete bogus assertions.
1406 * config/tc-sh.c (sh_optimize_expr): Only define for OBJ_ELF.
1407 * config/tc-sh.h (md_optimize_expr): Likewise.
1408 * config/tc-sh64.c (shmedia_md_pcrel_from_section): Delete bogus
1410 * config/tc-xtensa.c (convert_frag_immed_finish_loop): Likewise.
1412 2007-04-21 Nick Clifton <nickc@redhat.com>
1414 * config/atof-vax.c (md_atof): Fix comparison inside know().
1416 * config/tc-ia64.c (emit_one_bundle): Fix typo.
1418 2007-04-21 Alan Modra <amodra@bigpond.net.au>
1420 * expr.c (expr): Assert on rankarg, not rank which can be unsigned.
1421 * read.c (read_a_source_file): Remove buffer_limit[-1] assertion.
1422 Don't skip over NUL char.
1423 (pseudo_set): Set X_op for registers to O_register.
1424 * symbols.c (symbol_clone): Remove assertion that sym is defined.
1425 (resolve_symbol_value): Resolve O_register symbols.
1426 * config/tc-i386.c (parse_real_register): Don't use i386_float_regtab.
1427 Instead find st(0) by hash lookup.
1428 * config/tc-ppc.c (ppc_macro): Warning fix.
1430 * as.h (ENABLE_CHECKING): Default define to 0.
1431 (know): Assert if ENABLE_CHECKING.
1432 (struct relax_type): Remove superfluous declaration.
1433 * configure.in (--enable-checking): New.
1434 * configure: Regenerate.
1435 * config.in: Regenerate.
1436 * config/tc-ppc.c (ppc_setup_opcodes): Do checks when ENABLE_CHECKING.
1437 Check for duplicate powerpc_operands entries.
1439 2007-04-20 Nathan Sidwell <nathan@codesourcery.com>
1441 * config/tc-m68k.c (mcf5253_ctrl): New.
1442 (mcf52223_ctrl): New.
1443 (m68k_cpus): Add 5253, 52221, 52223.
1445 * config/m68k-parse.h (RAMBAR_ALT): New.
1446 * config/tc-m68k.c (mcf5206_ctrl, mcf5307_ctrl): New.
1447 (mcf_ctrl, mcf5208_ctrl, mcf5210a_ctrl, mcf5213_ctrl, mcf52235_ctrl,
1448 mcf5225_ctrl, mcf5235_ctrl, mcf5271_ctrl, mcf5275_ctrl,
1449 mcf5282_ctrl, mcf5329_ctrl, mcf5373_ctrl, mcfv4e_ctrl,
1450 mcf5475_ctrl, mcf5485_ctrl): Add RAMBAR synonym for
1452 (mcf5272_ctrl): Add RAMBAR0, replace add RAMBAR with RAMBAR_ALT.
1453 (m68k_cpus): Adjust 5206, 5206e & 5307 entries.
1454 (m68k_ip) <Case J>: Detect when RAMBAR_ALT should be used. Add it
1455 to control register mapping.
1457 2007-04-20 Alan Modra <amodra@bigpond.net.au>
1459 * messages.c (as_internal_value_out_of_range): Fix typo in
1460 error message. Return after printing domain error.
1461 * config/tc-ppc.c (ppc_insert_operand): Preserve low zero bits
1462 in max when shifting right.
1464 2007-04-20 Alan Modra <amodra@bigpond.net.au>
1466 * messages.c (as_internal_value_out_of_range): Extend to report
1467 errors for values with invalid low bits set.
1468 * config/tc-ppc.c (ppc_setup_opcodes): Check powerpc_operands bitm
1469 fields. Check that operands and opcode fields are disjoint.
1470 (ppc_insert_operand): Check operands using mask rather than bit
1471 count. Check low bits too. Handle PPC_OPERAND_PLUS1. Adjust
1473 (md_apply_fix): Adjust for struct powerpc_operand change.
1475 2007-04-19 Paul Brook <paul@codesourcery.com>
1477 * config/tc-arm.c (md_assemble): Only allow 16-bit instructions on
1478 Thumb-1. Add sanity check for bogus relaxations.
1480 2007-04-19 Paul Brook <paul@codesourcery.com>
1482 * config/tc-arm.c (insns): Allow rsb and rsbs on Thumb-1.
1484 2007-04-19 Alan Modra <amodra@bigpond.net.au>
1486 * Makefile.am: Run "make dep-am".
1487 * Makefile.in: Regenerate.
1489 2007-04-19 Nathan Froyd <froydnj@codesourcery.com>
1491 * doc/c-ppc.texi (PowerPC-Opts): Document -me500, -me500x2, -mspe.
1493 2007-04-18 H.J. Lu <hongjiu.lu@intel.com>
1495 * doc/c-i386.texi; Document .ssse3, .sse4.1, .sse4.2 and .sse4.
1497 2007-04-18 H.J. Lu <hongjiu.lu@intel.com>
1499 * config/tc-i386.c (cpu_arch): Add .sse4.2 and .sse4.
1500 (match_template): Handle operand size for crc32 in SSE4.2.
1501 (process_suffix): Handle operand type for crc32 in SSE4.2.
1502 (output_insn): Support SSE4.2.
1504 2007-04-18 H.J. Lu <hongjiu.lu@intel.com>
1506 * config/tc-i386.c (cpu_arch): Add .sse4.1.
1507 (process_operands): Adjust implicit operand for blendvpd,
1508 blendvps and pblendvb in SSE4.1.
1509 (output_insn): Support SSE4.1.
1511 2007-04-18 Paul Brook <paul@codesourcery.com>
1513 * config/tc-arm.c (do_t_rsb): Use 16-bit encoding when possible.
1515 2007-04-16 Kaz Kojima <kkojima@rr.iij4u.or.jp>
1517 * config/tc-sh.c (sh_handle_align): Call as_bad_where instead
1518 of as_warn_where for misaligned data.
1520 2007-04-15 Kaz Kojima <kkojima@rr.iij4u.or.jp>
1522 * config/tc-sh.c (align_test_frag_offset_fixed_p): Handle
1525 2007-04-14 Steve Ellcey <sje@cup.hp.com>
1527 * Makefile.am: Add ACLOCAL_AMFLAGS.
1528 * Makefile.in: Regenerate.
1530 2007-04-14 Kaz Kojima <kkojima@rr.iij4u.or.jp>
1532 * config/tc-sh.c (align_test_frag_offset_fixed_p): New.
1533 (sh_optimize_expr): Likewise.
1534 * config/tc-sh.h (md_optimize_expr): Define.
1535 (sh_optimize_expr): Prototype.
1537 2007-04-06 Matt Thomas <matt@netbsd.org>
1539 * config/tc-vax.c (vax_cons): Added to support %pcrel{8,16,32}(exp)
1540 to emit pcrel relocations by DWARF2 in non-code sections. Borrowed
1541 heavily from tc-sparc.c. (vax_cons_fix_new): Likewise.
1543 2007-04-04 Kazu Hirata <kazu@codesourcery.com>
1545 * config/tc-m68k.c (HAVE_LONG_BRANCH): Add fido_a.
1547 2007-04-04 Paul Brook <paul@codesourcery.com>
1549 * config/tc-arm.c (do_neon_ext): Enforce immediate range.
1550 (insns): Use I15 for vext.
1552 2007-04-04 Paul Brook <paul@codesourcery.com>
1554 * configure.tgt: Loosen checks for arm uclinux eabi targets.
1556 2007-04-02 Sterling Augustine <sterling@tensilica.com>
1558 * config/tc-xtensa.c (xtensa_flush_pending_output): Check
1559 outputting_stabs_line_debug.
1561 2007-03-26 Anatoly Sokolov <aesok@post.ru>
1563 * config/tc-avr.c (mcu_types): Add support for at90pwm1, at90usb82,
1564 at90usb162, atmega325p, atmega329p, atmega3250p and atmega3290p
1566 * doc/c-avr.texi: Document new devices.
1568 2007-04-02 Richard Sandiford <richard@codesourcery.com>
1570 * doc/as.texinfo: Add -mvxworks-pic to the list of MIPS options.
1571 * doc/c-mips.texi (-KPIC, -mvxworks-pic): Document.
1572 * config/tc-mips.c (md_show_usage): Mention -mvxworks-pic.
1574 2007-03-30 Sterling Augustine <sterling@tensilica.com>
1575 Bob Wilson <bob.wilson@acm.org>
1577 * config/tc-xtensa.c (xtensa_move_labels): Remove loops_ok argument.
1578 Do not check is_loop_target flag.
1579 (xtensa_frob_label): Adjust calls to xtensa_move_labels.
1580 (xg_assemble_vliw_tokens): Likewise. Also avoid calling
1581 xtensa_move_labels for alignment of loop opcodes.
1583 2007-03-30 H.J. Lu <hongjiu.lu@intel.com>
1585 * config/tc-i386.c (process_suffix): Reindent a bit.
1587 2007-03-30 Paul Brook <paul@codesourcery.com>
1589 * config/tc-arm.c (encode_thumb2_ldmstm): New function.
1590 (do_t_ldmstm): Generate 16-bit push/pop. Use encode_thumb2_ldmstm.
1591 (do_t_push_pop): Use encode_thumb2_ldmstm.
1593 2007-03-29 DJ Delorie <dj@redhat.com>
1595 * config/tc-m32c.c (rl_for, relaxable): Protect argument.
1596 (md_relax_table): Add entries for ADJNZ macros.
1597 (M32C_Macros): Add ADJNZ macros.
1598 (subtype_mappings): Add entries for ADJNZ macros.
1599 (insn_to_subtype): Check for adjnz and sbjnz insns.
1600 (md_estimate_size_before_relax): Pass insn to insn_to_subtype.
1601 (md_convert_frag): Convert adjnz and sbjnz.
1603 2007-03-29 Nick Clifton <nickc@redhat.com>
1605 * itbl-ops.c (itbl_entry): Remove unnecessary and excessively long
1607 * itbl-ops.h (enum e_processor): Initialise the e_nprocs field
1608 using ITBL_NUMBER_OF_PROCESSORS.
1609 * itbl-parse.y (yyerror): Remove use of redundant macro PARAMS.
1611 2007-03-28 H.J. Lu <hongjiu.lu@intel.com>
1613 * config/tc-i386.c (build_modrm_byte): For instructions with 2
1614 register operands, encode destination in i.rm.regmem if its
1617 2007-03-28 Richard Sandiford <richard@codesourcery.com>
1618 Phil Edwards <phil@codesourcery.com>
1620 * doc/as.texinfo: Put the contents after the title page rather
1621 than at the end of the document.
1623 2007-03-27 Alan Modra <amodra@bigpond.net.au>
1625 * NEWS: Mention ".reloc".
1627 2007-03-26 Sterling Augustine <sterling@tensilica.com>
1629 * config/tc-xtensa.c (xg_translate_idioms): Allow assembly idioms
1630 in FLIX instructions.
1632 2007-03-26 Julian Brown <julian@codesourcery.com>
1634 * config/tc-arm.c (arm_it): Add immisfloat field.
1635 (parse_qfloat_immediate): Disallow integer syntax for floating-point
1636 immediates. Fix hex immediates, handle 0.0 and -0.0 specially.
1637 (parse_neon_mov): Set immisfloat bit for operand if it parsed as a
1639 (neon_cmode_for_move_imm): Reject non-float immediates for float
1641 (neon_move_immediate): Pass immisfloat bit to neon_cmode_for_move_imm.
1643 2007-03-26 Julian Brown <julian@codesourcery.com>
1645 * doc/c-arm.texi: Add documentation for .dn/.qn directives.
1647 2007-03-26 Alan Modra <amodra@bigpond.net.au>
1649 * doc/as.texinfo (Reloc): Document.
1650 * read.c (potable): Add "reloc".
1651 (s_reloc): New function.
1652 * write.c (reloc_list): New global var.
1653 (resolve_reloc_expr_symbols): New function.
1654 (write_object_file): Call it.
1655 (write_relocs): Process reloc_list.
1656 * write.h (struct reloc_list): New.
1657 (reloc_list): Declare.
1659 2007-03-24 Paul Brook <paul@codesourcery.com>
1661 * config/tc-arm.c (do_t_ldmstm): Error on Thumb-2 addressing modes.
1663 2007-03-24 Paul Brook <paul@codesourcery.com>
1664 Mark Shinwell <shinwell@codesourcery.com>
1666 * config/tc-arm.c (operand_parse_code): Add OP_oRRw.
1667 (parse_operands): Don't expect comma if first operand missing.
1669 (do_srs): Encode register number, checking it is r13. Update comment.
1670 (insns): Update SRS entries to take a register.
1672 2007-03-23 H.J. Lu <hongjiu.lu@intel.com>
1674 * config/tc-i386.c (md_begin): Allow '.' in mnemonic.
1676 2007-03-23 Mark Shinwell <shinwell@codesourcery.com>
1678 * config/tc-arm.c (md_apply_fix): Turn CBZ instructions that
1679 attempt to jump to the next instruction into NOPs.
1681 2007-03-23 Alan Modra <amodra@bigpond.net.au>
1683 * config/tc-spu.c: Don't include opcode/spu.h.
1684 (md_assemble): Set tc_fix_data.insn_tag and arg_format.
1685 (md_apply_fix): Adjust.
1686 * config/tc-spu.h: Include opcode/spu.h.
1687 (struct tc_fix_info): New.
1688 (TC_FIX_TYPE, TC_INIT_FIX_DATA): Adjust.
1689 (TC_FORCE_RELOCATION): Define.
1691 2007-03-22 Joseph Myers <joseph@codesourcery.com>
1693 * doc/as.texinfo: Include VERSION_PACKAGE when reporting version.
1695 2007-03-21 H.J. Lu <hongjiu.lu@intel.com>
1697 * config/tc-i386.c (process_suffix): Check 0x90 instead of
1698 xchg for xchg %rax,%rax.
1700 2007-03-21 H.J. Lu <hongjiu.lu@intel.com>
1702 * config/tc-i386.c: Replace REX_MODE64, REX_EXTX, REX_EXTY
1703 and REX_EXTZ with REX_W, REX_R, REX_X and REX_B respectively.
1705 2007-03-21 H.J. Lu <hongjiu.lu@intel.com>
1708 * config/tc-i386.c (match_template): Properly handle 64bit mode
1711 2007-03-21 Anton Ertl <anton@mips.complang.tuw>
1714 * config/tc-alpha.c (emit_ustX): Fix ustq code generation.
1716 2007-03-21 H.J. Lu <hongjiu.lu@intel.com>
1718 * Makefile.am: Run dep-am.
1719 * Makefile.in: Regenerated.
1721 * config/tc-i386.c: Don't include "opcodes/i386-opc.h".
1723 * config/tc-i386.h: Include "opcodes/i386-opc.h".
1724 (NOP_OPCODE): Removed.
1725 (template): Likewise.
1727 2007-03-21 Andreas Schwab <schwab@suse.de>
1729 * config/tc-i386.h (NOP_OPCODE): Restore.
1731 2007-03-18 Mark Shinwell <shinwell@codesourcery.com>
1733 * config/tc-arm.c (do_mul): Don't warn about overlapping
1734 Rd and Rm operands when assembling for v6 or above.
1735 Correctly capitalize register names in the messages.
1736 (do_mlas): Likewise. Delete spurious blank line.
1738 2007-03-16 Kazu Hirata <kazu@codesourcery.com>
1740 * config/tc-m68k.c (m68k_cpus): Add an entry for fidoa.
1742 2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
1744 * config/tc-i386.c (md_begin): Use i386_regtab_size to scan
1746 (parse_register): Use i386_regtab_size instead of ARRAY_SIZE
1749 2007-03-15 Alexandre Oliva <aoliva@redhat.com>
1752 * app.c (do_scrub_chars): PUT after setting states.
1754 2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
1756 * Makefile.am: Run "make dep-am".
1757 * Makefile.in: Regenerated.
1759 * config/tc-i386.c: Include "opcodes/i386-opc.h" instead of
1761 (md_begin): Check reg_name != NULL for the last entry in
1764 * config/tc-i386.h: Move many entries to opcode/i386.h and
1767 * configure.in (need_opcodes): Set true for i386.
1768 * configure: Regenerated.
1770 2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
1772 * Makefile.am (REPORT_BUGS_TO): Removed.
1773 (INCLUDES): Remove -DREPORT_BUGS_TO.
1774 * Makefile.in: Regenerated.
1776 * configure.in (--with-bugurl): Removed.
1777 * configure: Regenerated.
1779 * doc/Makefile.am (as_TEXINFOS): Remove gasver.texi.
1780 (AM_MAKEINFOFLAGS): Add -I ../../bfd/doc.
1781 (TEXI2DVI): Likewise.
1782 (gasver.texi): Removed.
1783 (MOSTLYCLEANFILES): Remove gasver.texi.
1784 (as.1): Don't depend on gasver.texi.
1785 * doc/Makefile.in: Regenerated.
1787 * doc/as.texi: Include bfdver.texi instead of gasver.texi.
1789 2007-03-14 Daniel Jacobowitz <dan@codesourcery.com>
1791 * config/tc-arm.c (arm_copy_symbol_attributes): New.
1792 * config/tc-arm.h (arm_copy_symbol_attributes): Declare.
1793 (TC_COPY_SYMBOL_ATTRIBUTES): Define.
1794 * gas/symbols.c (copy_symbol_attributes): Use
1795 TC_COPY_SYMBOL_ATTRIBUTES.
1797 2007-03-14 Paul Brook <paul@codesourcery.com>
1799 * config/tc-arm.c (T16_32_TAB): Fix dec_sp encoding.
1801 2007-03-14 Alan Modra <amodra@bigpond.net.au>
1804 * write.c (relax_segment): Insert extra alignment padding
1805 to break infinite relax loop when given impossible
1806 gcc_except_table assembly.
1808 2007-03-12 H.J. Lu <hongjiu.lu@intel.com>
1810 * config/tc-i386.c (md_assemble): Use Opcode_XXX instead of XXX
1811 on i.tm.base_opcode.
1812 (match_template): Likewise.
1813 (process_operands): Use ~0x3 mask to match MOV_AX_DISP32.
1815 * config/tc-i386.h (Opcode_D): New.
1816 (Opcode_FloatR): Likewise.
1817 (Opcode_FloatD): Likewise.
1820 (FloatMF): Likewise.
1824 2007-03-09 Alexandre Oliva <aoliva@redhat.com>
1826 * app.c (do_scrub_chars): Recognize comments after # line "file".
1827 * read.c (get_linefile_number): New.
1828 (s_app_line): Accept ill-formed .linefile lines as comments.
1830 2007-03-09 Alan Modra <amodra@bigpond.net.au>
1832 * config/tc-i386.h (WORKING_DOT_WORD): Define.
1834 2007-03-09 Alexandre Oliva <aoliva@redhat.com>
1836 * app.c (do_scrub_chars): Turn #<line>"file"flags into .linefile.
1837 * as.h (new_logical_line_flags): New.
1838 * input-scrub.c (new_logical_line): Turned into wrapper for...
1839 (new_logical_line_flags): this. Handle flags.
1840 * read.c (potable): Add linefile. Adjust appline argument.
1841 (s_app_file): Fake .appfiles no more.
1842 (s_app_line): For .linefile, accept file name and flags.
1844 2007-03-08 Alan Modra <amodra@bigpond.net.au>
1846 * symbols.c (symbol_relc_make_sym): Comment typo fixes.
1848 2007-03-08 Alan Modra <amodra@bigpond.net.au>
1850 * Makefile.am: Run "make dep-am".
1851 * Makefile.in: Regenerate.
1852 * po/POTFILES.in: Regenerate.
1854 2007-03-07 Joseph Myers <joseph@codesourcery.com>
1856 * configure.in (REPORT_BUGS_TEXI): Define to Texinfo version of
1858 * doc/Makefile.am (gasver.texi): Define BUGURL.
1859 * doc/as.texinfo: Use BUGURL.
1860 * Makefile.in, configure, doc/Makefile.in: Regenerate.
1862 2007-03-06 Andreas Krebbel <krebbel1@de.ibm.com>
1864 * config/tc-s390.c (md_parse_option): z9-ec option added.
1866 2007-03-02 Paul Brook <paul@codesourcery.com>
1868 * config/tc-arm.c (relax_immediate): Always return positive values.
1869 (relaxed_symbol_addr): New function.
1870 (relax_adr, relax_branch): Use it.
1871 (arm_relax_frag): Pass strect argument. Adjust infinite loop check.
1873 2007-03-01 Joseph Myers <joseph@codesourcery.com>
1875 * as.c (parse_args): Update copyright date.
1877 2007-02-28 Nathan Sidwell <nathan@codesourcery.com>
1879 * configure.tgt (sh-*-uclinux, sh[12]-*-uclinux): Specify as elf.
1881 2007-02-28 Nick Clifton <nickc@redhat.com>
1884 * config/tc-d10v.c (do_assemble): Do not generate error messages,
1885 just return -1 whenever a problem is encountered.
1886 (md_assemble): If do_assemble returns -1 generate a non-fatal
1887 error message and return.
1890 * config/tc-msp430.c (line_separator_char): Change to '{'.
1892 2007-02-27 Alan Modra <amodra@bigpond.net.au>
1894 * config/tc-m68hc11.c (fixup24): Correct fixup size.
1895 (build_jump_insn): Likewise.
1896 (build_insn): Likewise.
1897 (s_m68hc11_relax): Likewise.
1899 2007-02-27 Alan Modra <amodra@bigpond.net.au>
1901 * config/obj-elf.c (elf_frob_file): frag_wane any new frags.
1903 2007-02-25 Mark Shinwell <shinwell@codesourcery.com>
1905 * config/tc-arm.c (do_vfp_nsyn_pop): Use fldmias/fldmiad.
1907 2007-02-23 Alan Modra <amodra@bigpond.net.au>
1909 * config/tc-mn10300.c (md_convert_frag): Correct fixup size.
1910 (md_assemble): Likewise.
1912 2007-02-22 Alan Modra <amodra@bigpond.net.au>
1914 * write.c (size_seg): Always clear SEC_RELOC here.
1915 (install_reloc): New function, extracted from..
1916 (write_relocs): ..here. Combine RELOC_EXPANSION_POSSIBLE code
1917 with !RELOC_EXPANSION_POSSIBLE code. Don't add fr_offset when
1918 testing frag size. Set SEC_RELOC here.
1920 2007-02-21 Alan Modra <amodra@bigpond.net.au>
1923 * config/tc-avr.h (TC_FX_SIZE_SLACK): Define.
1925 2007-02-20 Thiemo Seufer <ths@mips.com>
1927 * doc/c-mips.texi: Document 74kc, 74kf, 74kx.
1929 2007-02-20 Thiemo Seufer <ths@mips.com>
1931 * config/tc-mips.c (mips_cpu_info_table): Add 74K configurations.
1933 2007-02-20 Thiemo Seufer <ths@mips.com>
1934 Chao-Ying Fu <fu@mips.com>
1936 * config/tc-mips.c (mips_set_options, mips_opts, file_ase_dspr2,
1937 ISA_SUPPORTS_DSPR2_ASE, MIPS_CPU_ASE_DSPR2): Add DSP R2 ASE support.
1938 (macro_build): Add case '2'.
1939 (macro): Expand M_BALIGN to nop, packrl.ph or balign.
1940 (validate_mips_insn): Add support for balign instruction.
1941 (mips_ip): Handle DSP R2 instructions. Support balign instruction.
1942 (OPTION_DSPR2, OPTION_NO_DSPR2, OPTION_COMPAT_ARCH_BASE,
1943 md_parse_option, mips_after_parse_args): Add -mdspr2 and -mno-dspr2
1944 command line options.
1945 (s_mipsset): Add support for .set dspr2 and .set nodspr2 directives.
1946 (md_show_usage): Add -mdspr2 and -mno-dspr2 help output.
1947 * doc/c-mips.texi, doc/as.texinfo: Document -mdspr2, -mno-dspr2,
1948 .set dspr2, .set nodspr2.
1950 2007-02-20 Nathan Sidwell <nathan@codesourcery.com>
1952 * config/tc-m68k.c (mcf5210a_ctrl, mcf52235_ctrl, mcf5225_ctrl): New.
1953 (m68k_cpus): Add 5210a..5211a, 52230..52235 5224..5225.
1955 2007-02-18 Alan Modra <amodra@bigpond.net.au>
1957 * write.c (TC_FX_SIZE_SLACK): Define.
1958 (write_relocs): Reinstate check for fixup within frag.
1959 * config/tc-bfin.h (TC_FX_SIZE_SLACK): Define.
1960 * config/tc-h8300.h (TC_FX_SIZE_SLACK): Define.
1961 * config/tc-mmix.h (TC_FX_SIZE_SLACK): Define.
1962 * config/tc-sh.h (TC_FX_SIZE_SLACK): Define.
1963 * config/tc-xstormy16.h (TC_FX_SIZE_SLACK): Define.
1965 2007-02-17 Mark Mitchell <mark@codesourcery.com>
1966 Nathan Sidwell <nathan@codesourcery.com>
1967 Vladimir Prus <vladimir@codesourcery.com
1968 Joseph Myers <joseph@codesourcery.com>
1970 * configure.in (--with-bugurl): New option.
1971 * configure: Regenerate.
1972 * dep-in.sed: Remove bin-bugs.h.
1973 * Makefile.am (REPORT_BUGS_TO): Define.
1974 (INCLUDES): Define REPORT_BUGS_TO.
1975 (DEP_INCLUDES): Likewise.
1976 ($(OBJS)): No longer depend on bin-bugs.h.
1977 * Makefile.in: Regenerate.
1978 * doc/Makefile.in: Regenerate.
1979 * as.c (show_usage): Don't print empty REPORT_BUGS_TO.
1980 * as.h: Remove include of bin-bugs.h.
1982 2007-02-17 Alan Modra <amodra@bigpond.net.au>
1984 * write.c: White space fixes.
1985 (fixup_segment): Move symbol_mri_common_p adjustments..
1986 (write_relocs): ..and symbol_equated_reloc_p adjustments..
1987 (adjust_reloc_syms): ..to here.
1989 2007-02-16 Alan Modra <amodra@bigpond.net.au>
1991 * subsegs.c (subseg_change, subseg_get): Use xcalloc rather than
1992 xmalloc, memset. Don't bother assigning NULL to known zero mem.
1993 (subseg_set_rest): Remove unnecessary cast.
1994 * write.c: Include libbfd.h. Replace PTR with void * throughout.
1995 Remove unnecessary forward declarations and casts.
1996 (set_symtab): Delete extern bfd_alloc.
1997 (fixup_segment): Move.
1999 2007-02-15 Nathan Sidwell <nathan@codesourcery.com>
2001 * config/m68k-parse.h (m68k_register): Add ROMBAR0, ASID.
2002 * config/tc-m68k.c (mcfv4e_ctrl): Add ColdFire specific names.
2003 (mcf5475_ctrl, mcf5485_ctrl): New.
2004 (m68k_cpus): Use mcf5485_ctrl and mcf5485_ctrl for those families.
2005 (m68k_ip): Add ASID, MMUBAR, ROMBAR0 handling.
2006 (init_table): Add asid, mmubar, adjust rombar0.
2008 2007-02-14 Alan Modra <amodra@bigpond.net.au>
2010 * config/tc-i386.h (Seg2ShortForm, Seg3ShortForm): Delete.
2011 * config/tc-i386.c: Wrap overly long lines, whitespace fixes.
2012 (process_operands): Move old Seg2ShortForm and Seg3ShortForm
2013 code, and test for these insns using a combination of
2014 opcode_modifier and operand_types.
2016 2007-02-07 Paul Brook <paul@codesourcery.com>
2018 * configure.tgt: Add arm*-*-uclinux-*eabi.
2020 2007-02-05 Dave Brolley <brolley@redhat.com>
2021 Richard Sandiford <rsandifo@redhat.com>
2022 DJ Delorie <dj@redhat.com>
2023 Stan Cox <scox@redhat.com>
2024 Jim Blandy <jimb@redhat.com>
2025 Nick Clifton <nickc@redhat.com>
2026 Jim Wilson <wilson@redhat.com>
2027 Frank Ch. Eigler <fche@redhat.com>
2028 Graydon Hoare <graydon@redhat.com>
2029 Ben Elliston <bje@redhat.com>
2030 John Healy <jhealy@redhat.com>
2031 Richard Henderson <rth@redhat.com>
2033 * Makefile.am (CPU_TYPES): Add mep.
2034 (TARGET_CPU_CFILES): Add tc-mep.c.
2035 (TARGET_CPU_HFILES): Add tc-mep.h.
2036 (DEPTC_mep_elf): New variable.
2037 (DEPTC_mep_coff): Likewise.
2038 (DEPOBJ_mep_coff, DEPOBJ_mep_elf, DEP_mep_coff, DEP_mep_elf): Likewise.
2039 * configure.in: Support mep.
2040 * configure.tgt: Likewise.
2041 * config/tc-mep.c: New file.
2042 * config/obj-elf.c: New file.
2043 * config/tc-mep.c: New file.
2044 * config/tc-mep.h: New file.
2045 * testsuite/gas/mep: New testsuite with content.
2046 * Makefile.in: Regenerate.
2047 * configure: Regenerate.
2049 2007-02-05 Dave Brolley <brolley@redhat.com>
2051 * cgen.c (gas_cgen_install_complex_reloc): Removed.
2052 (complex_reloc_installation_howto): Removed.
2054 2007-02-05 Dave Brolley <brolley@redhat.com>
2055 Graydon Hoare <graydon@redhat.com>
2056 DJ Delorie <dj@redhat.com>
2057 Catherine Moore <clm@redhat.com>
2058 Michael Chastain <chastain@redhat.com>
2059 Frank Ch. Eigler <fche@redhat.com>
2061 * symbols.c (use_complex_relocs_for): New, to decide
2062 when to use complex relocs. Add signed RELC support.
2063 (resolve_symbol_value): Call use_complex_relocs_for. Unconditionally
2064 encode expression symbols as mangled complex relocation symbols (when
2065 compiled with -DOBJ_COMPLEX_RELOC).
2066 (symbol_relc_make_sym,value,expr): New traversal/conversion routines.
2067 * cgen.c (gas_cgen_md_apply_fix3): Only set signed_p if RELC. Call
2068 encode_addend with new args. Modify to get start, length from
2069 ifield whenever it is set. Also change condition on which
2070 self-describing relocs are encoded. Add hook into
2071 gas_cgen_encode_addend.
2072 (queue_fixup_recursively): Add signed RELC support. Change from masked
2073 expr to trunc flag. Restore assignment of sub-field value to
2074 temporary in fixups array. Reflect changed meaning of last arg to
2075 queue_fixup_recursively.
2076 (fixup): Add cgen_maybe_multi_ifield member.
2077 (make_right_shifted_expr): New function.
2078 (queue_fixup): Change to recursive function that fragments
2079 fixups if operand has a multi-ifield.
2080 (gas_cgen_parse_operand): Add RELC code to wrap expressions in
2081 symbols, call weak_operand_overflow_check, and fragment call
2082 queue_fixup with operand fields.
2083 (gas_cgen_finish_insn) Modify to manage ifield pointer.
2084 (weak_operand_overflow_check): New function to try to select
2086 (gas_cgen_encode_addend): New function for relc.
2087 (gas_cgen_install_complex_reloc): Likewise.
2088 (gas_cgen_tc_gen_reloc): Add hook into gas_cgen_install_complex_reloc.
2089 * write.h (struct fix): Add msb_field_p to fx_cgen sub-struct. Add
2090 cgen_maybe_multi_ifield field to fx_cgen substructure.
2091 * cgen.h (GAS_CGEN_MAX_FIXUPS): Bump from 3 up to 32.
2092 * symbols.h (symbol_relc_make_sym,value,expr): New prototypes.
2094 2007-02-03 DJ Delorie <dj@delorie.com>
2096 * config/tc-m32c.c (m32c_cons_fix_new): New. Added to support 3
2098 * config/tc-m32c.h (TC_CONS_FIX_NEW): Define.
2099 (m32c_cons_fix_new): Prototype.
2101 2007-02-02 Bob Wilson <bob.wilson@acm.org>
2103 * config/tc-xtensa.c (xg_build_to_insn): Use tinsn_init.
2104 (xg_expand_assembly_insn, istack_push_space, istack_pop): Likewise.
2106 2007-02-02 Bob Wilson <bob.wilson@acm.org>
2108 * config/tc-xtensa.c (SUFFIX_MAP, suffix_relocs): New.
2109 (xtensa_elf_suffix): Use suffix_relocs instead of local mapping table.
2110 (map_suffix_reloc_to_operator): New.
2111 (map_operator_to_reloc): New.
2112 (expression_maybe_register): Fix incorrect test of return value from
2113 xtensa_elf_suffix. Rearrange to use map_suffix_reloc_to_operator.
2114 (xg_assemble_literal, convert_frag_immed): Use map_operator_to_reloc.
2116 2007-02-02 Bob Wilson <bob.wilson@acm.org>
2118 * config/xtensa-istack.h (struct tinsn_struct): Delete fixup field.
2119 (tinsn_get_tok): Delete prototype.
2120 * config/tc-xtensa.c (tinsn_get_tok): Delete.
2122 2007-02-02 Bob Wilson <bob.wilson@acm.org>
2124 * config/xtensa-relax.h (struct build_instr): Delete id field.
2125 * config/xtensa-relax.c (widen_spec_list): Remove zeros from LITERAL
2127 (append_literal_op, append_label_op): Remove litnum/labnum arguments;
2128 set op_data fields to zero.
2129 (parse_id_constant): Delete.
2130 (build_transition): Remove code to handle numbered literals and labels.
2132 2007-02-02 Bob Wilson <bob.wilson@acm.org>
2134 * config/xtensa-relax.c (build_transition): Remove code after as_fatal.
2135 (build_transition_table): Likewise.
2137 2007-02-01 Bob Wilson <bob.wilson@acm.org>
2139 * config/tc-xtensa.c (xg_add_opcode_fix, md_apply_fix): Delete use of
2141 * config/tc-xtensa.h (TC_FORCE_RELOCATION_LOCAL): Remove.
2143 2007-02-02 Alan Modra <amodra@bigpond.net.au>
2145 * write.h (struct fix <fx_pcrel_adjust, fx_size>): Move.
2146 (struct fix <fx_plt>): Rename to tcbit2.
2147 * write.c (fix_new_internal): Adjust.
2148 (TC_FORCE_RELOCATION_LOCAL): Don't test fx_plt.
2149 * config/tc-arm.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
2150 * config/tc-cris.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
2151 * config/tc-i386.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
2152 * config/tc-i960.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
2153 * config/tc-sh.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
2154 * config/tc-sh64.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
2155 * config/tc-sparc.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
2156 * config/tc-msp430.c (msp430_force_relocation_local): Likewise.
2157 * config/tc-ia64.c (emit_one_bundle): Don't set fx_plt.
2158 * config/tc-ia64.h (TC_FORCE_RELOCATION_LOCAL): Don't test fx_plt.
2159 Instead, compare fx_r_type.
2160 * config/tc-xtensa.c (xg_add_opcode_fix, md_apply_fix): Use
2161 fx_tcbit in place of fx_plt.
2162 * config/tc-xtensa.h (TC_FORCE_RELOCATION_LOCAL): Define.
2163 * doc/internals.texi (TC_FORCE_RELOCATION_LOCAL): Remove reference
2166 2007-01-30 Nick Clifton <nickc@redhat.com>
2168 * as.c (main): Mark symbols created via the --defsym command line
2169 option as volatile so that they can be overridden later on by a
2170 .set directive. This maintains compatibility with the behaviour
2171 of earlier versions of the assembler.
2172 * doc/as.texinfo (--defsym): Document that the defined symbol's
2173 value can be overridden via a .set directive.
2175 2007-01-28 H.J. Lu <hongjiu.lu@intel.com>
2177 * config/tc-i386.c (swap_imm_operands): Renamed to ...
2178 (swap_2_operands): This. Take 2 ints.
2179 (md_assemble): Updated.
2180 (swap_operands): Call swap_2_operands to swap 2 operands.
2182 2007-01-24 DJ Delorie <dj@redhat.com>
2184 * config/tc-m32c.c (md_pseudo_table): Add .3byte.
2186 2007-01-22 Nick Clifton <nickc@redhat.com>
2189 * tc-score.c: Remove unnecessary uses of _().
2190 Make the err_msg[] a file level local array in order to save
2192 Remove unnecessary sprintf()s.
2194 2007-01-18 Mei Ligang <ligang@sunnorth.com.cn>
2197 * config/tc-score.c : Using _() for const string.
2198 Do not assign inst.error with a local string pointer.
2199 (md_section_align): Pad section.
2201 2007-01-13 H.J. Lu <hongjiu.lu@intel.com>
2203 * config/tc-i386.c (build_modrm_byte): Check number of operands
2204 when procssing memory/register operand.
2206 2007-01-12 Nick Clifton <nickc@redhat.com>
2209 * macro.c (expand_irp): Do not ignore spaces inside quoted
2212 2007-01-12 Alan Modra <amodra@bigpond.net.au>
2214 * config/tc-spu.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
2215 * config/tc-m32r.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
2216 * config/tc-mn10300.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
2217 (TC_FORCE_RELOCATION): Define.
2218 (TC_FORCE_RELOCATION_LOCAL): Define.
2219 * config/tc-mn10300.c (mn10300_fix_adjustable): Adjust.
2221 2007-01-12 Alan Modra <amodra@bigpond.net.au>
2223 * input-file.c (input_file_open): Check fgets return.
2225 2007-01-11 Paul Brook <paul@codesourcery.com>
2227 * config/tc-arm.c (do_t_add_sub): Use Rd and Rs.
2229 2007-01-11 Nick Clifton <nickc@redhat.com>
2232 * config/tc-arm.c (md_begin): Cope with an NULL mcpu_fpu_opt
2235 * config/tc-mcore.c (md_number_to_chars): Use
2236 number_to_chars_{big|little}endian.
2238 2007-01-08 Kazu Hirata <kazu@codesourcery.com>
2240 * config/tc-m68k.c (m68k_archs, m68k_cpus): Treat Fido as an
2241 architecture by itself.
2242 (m68k_ip): Don't issue a warning for tbl instructions on fido.
2243 (m68k_elf_final_processing): Treat Fido as an architecture by
2246 2007-01-08 Kai Tietz <kai.tietz@onevision.com>
2248 * configure.tgt: Renamed target x86_64-*-mingw64 to x86_64-*-mingw*
2250 2007-01-05 H.J. Lu <hongjiu.lu@intel.com>
2252 * config/tc-i386.c (set_intel_syntax): Update set_intel_syntax
2253 depending on allow_naked_reg.
2255 2007-01-04 Paul Brook <paul@codesourcery.com>
2257 * config/tc-arm.c (do_cpsi): Set mmod bit for 2 argument form.
2259 2007-01-04 H.J. Lu <hongjiu.lu@intel.com>
2262 * config/tc-i386.c (register_prefix): New.
2263 (set_intel_syntax): Set set_intel_syntax to "" if register
2264 prefix isn't needed.
2265 (check_byte_reg): Use register_prefix for error message.
2266 (check_long_reg): Likewise.
2267 (check_qword_reg): Likewise.
2268 (check_word_reg): Likewise.
2270 2007-01-04 Julian Brown <julian@codesourcery.com>
2272 * config/tc-arm.c (do_neon_shl_imm): Swap rN, rM.
2273 (do_neon_qshl_imm): Likewise.
2274 (do_neon_rshl): New function. Handle rounding variants of
2275 v{q}shl-by-register.
2276 (insns): Use do_neon_rshl for vrshl, vqrshl.
2278 2007-01-04 Paul Brook <paul@codesourcery.com>
2280 * config/tc-arm.c (NEON_ENC_TAB): Fix encoding of vclt, vcle, vaclt
2283 2007-01-03 H.J. Lu <hongjiu.lu@intel.com>
2285 * config/tc-i386.c (swap_operands): Remove branches.
2287 2007-01-03 H.J. Lu <hongjiu.lu@intel.com>
2289 * config/tc-i386.c: Update copyright year.
2290 * config/tc-i386.h: Likewise.
2292 2007-01-03 H.J. Lu <hongjiu.lu@intel.com>
2294 * config/tc-i386.c (smallest_imm_type): Return unsigned int
2297 2007-01-03 H.J. Lu <hongjiu.lu@intel.com>
2299 * config/tc-i386.c: Convert to ISO C90 formatting
2300 * config/tc-i386.h: Likewise.
2302 2007-01-03 David Daney <ddaney@avtrex.com>
2304 * config/tc-mips.c (md_show_usage): Clean up -mno-shared
2307 For older changes see ChangeLog-2006
2313 version-control: never