1 2004-08-05 Bob Wilson <bob.wilson@acm.org>
3 * write.c (relax_segment): Use was_address instead of address when
4 setting fr_fix field for align frag due to backwards .org.
6 2004-07-29 Alexandre Oliva <aoliva@redhat.com>
8 Introduce SH2a support.
9 2004-02-24 Corinna Vinschen <vinschen@redhat.com>
10 * config/tc-sh.c (get_specific): Change arch_sh2a_up to
12 2004-02-24 Corinna Vinschen <vinschen@redhat.com>
13 * config/tc-sh.c (md_parse_option): Add sh2a-nofpu ISA handling.
14 2004-02-20 Corinna Vinschen <vinschen@redhat.com>
15 * config/tc-sh.c (sh_elf_final_processing): Move sh2a recognition
16 to end of conditional expression.
17 2004-02-20 Corinna Vinschen <vinschen@redhat.com>
18 * config/tc-sh.c: Add sh2a-nofpu support.
19 2003-12-29 DJ Delorie <dj@redhat.com>
20 * tc-sh.c: Add sh2a support.
22 (parse_at): Support @@(disp,tbr).
23 (get_specific): Support sh2a opcodes.
24 (insert4): New, for 4 byte relocs.
25 (build_Mytes): Support sh2a opcodes.
26 (md_apply_fix3_Mytes): Support sh2a opcodes.
27 2003-12-02 Michael Snyder <msnyder@redhat.com>
28 * config/tc-sh.c (md_parse_option): Handle sh2a.
29 (sh_elf_final_processing): Ditto.
31 2004-07-27 Jason Thorpe <thorpej@wasabisystems.com>
33 * config/tc-hppa.h (TARGET_FORMAT): Set to "elf32-hppa-netbsd"
36 2004-07-27 Alan Modra <amodra@bigpond.net.au>
38 * config/tc-ppc.c (ppc_frob_file_before_adjust): Warn if .toc too big.
39 (ppc_arch): Expand comment.
41 2004-07-27 Tomer Levi <Tomer.Levi@nsc.com>
43 * config/tc-crx.c: Support evaluating the difference between two
45 * config/tc-crx.h: Likewise.
47 2004-07-26 H.J. Lu <hongjiu.lu@intel.com>
49 * config/tc-ia64.c (start_unwind_section): Set the linked-to
51 (ia64_elf_section_change_hook): Set the linked-to section for
54 2004-07-26 Dmitry Diky <diwil@spec.ru>
56 * config/tc-msp430.c: Add new subtargets: msp430x1610,
57 msp430x1611, msp430x1612, msp430x415, msp430x417, msp430xG437,
58 msp430xG438, msp430xG439.
60 2004-07-25 Daniel Jacobowitz <dan@debian.org>
62 * doc/as.texinfo (Section, PushSection): Correct documentation
65 2004-07-21 Jan Beulich <jbeulich@novell.com>
67 * config/tc-i386.c (optimize_imm): Adjust immediates to only those
68 permissible for the selected instruction suffix.
69 (match_template): Don't permit 64-bit general purpose operands in
71 (finalize_imm): Permit 64-bit immediates.
72 (build_modrm_byte): Don't treat 32-bit addressing in 64-bit mode
73 specially except for the width of the used base and/or index
74 registers. For 32-bit displacements, use sign-extended
75 relocations only when using 64-bit addressing.
76 Force zero displacement on rip-relative addressing when there is
77 no other displacement.
78 (i386_index_check): Don't treat 32-bit addressing in 64-bit mode
79 specially except for the width of the used base and/or index
81 (parse_register): Disallow Reg64 registers in 32-bit mode.
83 * config/tc-i386.c: For DefaultSize instructions, don't guess a 'q'
84 suffix if the instruction doesn't support it.
86 2004-07-20 Maciej W. Rozycki <macro@linux-mips.org>
88 * config/tc-mips.c (append_insn): Handle constant expressions with
89 no associated relocation.
90 (mips_ip): Cancel the expression after use for the Q format
92 (parse_relocation): Return no relocation for unsupported
94 (my_getSmallExpression): Return no relocation if no relocation
97 2004-07-19 John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
99 * config/obj-som.c (adjust_stab_sections): Add prototype.
100 (obj_som_compiler, obj_som_version, obj_som_copyright,
101 adjust_stab_sections): Add ATTRIBUTE_UNUSED to unused arguments.
102 * config/tc-hppa.c (update_subspace): Likewise.
103 (is_defined_subspace): Amplify comment.
104 * config/obj-som.h (som_frob_file): Add prototype.
106 2004-07-19 Christopher Faylor <cgf@timesys.com>
107 H.J. Lu <hongjiu.lu@intel.com>
109 * subsegs.c (section_symbol): Don't create a new segment when
110 existing segment is undefined.
112 2004-07-16 Richard Earnshaw <rearnsha@arm.com>
114 * config/tc-arm.c: Include include/opcode/arm.h.
115 (ARM_EXT_*, ARM_ARCH_*, ARM_ANY, ARM_ALL, COPROC_ANY): Delete.
116 (FPU_FPA_EXT_* FPU_VFP_EXT_*, FPU_ANY, FPU_NONE, FPU_MAVERICK): Delete.
117 (FPU_ARCH_*): Delete.
118 * Makefile.am: Update dependencies.
119 * Makefile.in: Regenerate.
121 2004-07-15 Nick Clifton <nickc@redhat.com>
123 * configure.in: Accept armbe as a big-endian arm configuration.
124 * configure: Regenerate.
126 2004-07-13 Thomas Nystrom <thn@saeab.se>
128 * config/tc-i386.c (T_SHIFTOP): New constant.
129 (intel_e05_1): Handle '&', '|' and T_SHIFTOP.
130 (intel_el1): Handle '~'.
131 (intel_get_token): Handle '<>', '&', '|' and '~'.
133 2004-07-13 Nick Clifton <nickc@redhat.com>
135 (md_assemble): Remove spurious newline from end of as_bad error
137 (intel_e05_1): Likewise.
138 (intel_e11): Likewise.
139 (intel_match_token): Likewise.
141 2004-07-11 Andreas Schwab <schwab@suse.de>
143 * config/tc-m68k.c: Convert to C90. Remove redundant
144 declarations. Indentation fixup.
145 [M68KCOFF]: Include "obj-coff.h" instead of declaring
146 obj_coff_section ourselves.
148 2004-07-09 James E Wilson <wilson@specifixinc.com>
150 * config/tc-ia64.c (default_big_endian): New.
151 (dot_byteorder, md_begin): Use it.
152 (md_parse_option): Set it.
154 2004-07-09 Nick Clifton <nickc@redhat.com>
156 * configure.in: Change sh-sybmian-elf to sh-*-symbianelf.
157 * configure: Regenerate.
158 * NEWS: Change sh-sybmian-elf to sh-*-symbianelf.
159 * config/tc-sh.c (sh_elf_final_processing): Use renamed version of
160 sh_find_elf_flags if necessary.
162 2004-07-08 Richard Sandiford <rsandifo@redhat.com>
164 * config/tc-mips.c (mips_fix_adjustable): If the full addend is
165 going to be split into more than one in-place addend, return 0
166 for relocations against mergeable sections. Associate comments
169 2004-07-07 Tomer Levi <Tomer.Levi@nsc.com>
171 * Makefile.am (CPU_TYPES): Add crx.
172 (TARGET_CPU_CFILES): Add config/tc-crx.c.
173 (TARGET_CPU_HFILES): Add config/tc-crx.h.
174 (DEPTC_crx_elf): New target.
175 (DEPOBJ_crx_elf): Likewise.
176 (DEP_crx_elf): Likewise.
177 * Makefile.in: Regenerate.
178 * configure.in: Add crx* target.
179 * configure: Regenerate.
180 * config/tc-crx.c: New file.
181 * config/tc-crx.h: New file.
182 * NEWS: Mention new target.
184 2004-07-06 Nick Clifton <nickc@redhat.com>
186 * config.in: Undefine TARGET_SYMBIAN by default.
188 * configure: Regenerate. Add sh-symbian-elf target. If
189 selected define TARGET_SYMBIAN.
190 * config/tc-sh.h (TARGET_FORMAT): Select a Symbian target
191 format if TARGET_SYMBIAN has been defined.
193 * output-file.c (output_file_create): Report the target format
194 chosen when bfd_openw reports that it is invalid.
196 * config/obj-coff.c (coff_pseudo_table): Only define the weak
197 pseudo for BFD based assemblers.
199 2004-07-05 Andrew Stubbs <andrew.stubbs@superh.com>
202 * config/tc-sh.c (md_assemble): Change isspace to ISSPACE.
203 (md_parse_option): Remove redundant -isa testing.
204 Make bfd_arch variable const.
205 (md_show_usage): Make bfd_arch variable const.
207 2004-07-03 James E Wilson <wilson@specifixinc.com>
209 * config/tc-ia64.c (emit_one_bundle): Check and set insn_addr.
210 * config/tc-ia64.h (md_frag_check): Define.
212 2004-07-03 Aaron W. LaFramboise <aaron98wiridge9@aaronwl.com>
214 * config/obj-coff.c (obj_coff_weak): New .weak syntax for PE weak
216 * doc/as.texinfo (Weak): Document PE weak symbols.
218 2004-07-03 Richard Sandiford <rsandifo@redhat.com>
220 * config/tc-mips.c (HAVE_IN_PLACE_ADDENDS): New macro.
221 (reloc_needs_lo_p): Only return true if HAVE_IN_PLACE_ADDENDS.
222 (mips_frob_file): Rework so that only a single pass through the
223 relocs is needed. Allow %lo()s to have higher offsets than their
224 corresponding %hi()s or %got()s.
226 2004-07-02 Nick Clifton <nickc@redhat.com>
228 * config/tc-arm.c (md_apply_fix3:BFD_RELOC_ARM_IMMEDIATE): Do not
229 allow values which have come from undefined symbols.
230 Always consider this fixup to have been processed as a reloc
231 cannot be generated for it.
233 2004-07-02 Alan Modra <amodra@bigpond.net.au>
235 * frags.h (struct frag): Add has_code and insn_addr fields.
236 * write.c (cvt_frag_to_fill): Invoke md_frag_check.
237 * config/tc-ppc.c (md_assemble): Check and set insn_addr.
238 * config/tc-ppc.h (md_frag_check): Define.
240 2004-06-28 Maciej W. Rozycki <macro@linux-mips.org>
242 * doc/Makefile.am (info): Rename goal to...
243 (info-local): ... this, to preserve implicit dependencies.
244 * doc/Makefile.in: Regenerate with automake 1.8.5.
246 2004-06-25 Kazuhiro Inaoka <inaoka.kazuhiro@renesas.com>
248 * config/tc-m32r.c (md_convert_frag): Changed for @PLT.
249 (m32r_cgen_record_fixup_exp): Changed for @GOTOFF, @GOT.
250 (m32r_fix_adjustable): Changed for @GOTOFF, @GOT, @PLT.
251 (tc_gen_reloc): Likewise.
252 (m32r_end_of_match): Add for @GOTOFF, @GOT, @PLT.
253 (m32r_parse_name): Likewise.
254 (m32r_cgen_parse_fix_exp): Likewise.
255 * config/tc-m32r.h (md_parse_name): Define for @GOTOFF, @GOT, @PLT.
256 (O_PIC_reloc): Likewise.
257 (TC_CGEN_PARSE_FIX_EXP): Likewise..
258 * cgen.c (gas_cgen_parse_operand): Add TC_CGEN_PARSE_FIX_EXP
259 for @GOTOFF, @GOT, @PLT.
261 2004-06-21 Jan Beulich <jbeulich@novell.com>
263 * gas/symbols.c: While discarding ordinary local absolute symbols
264 when --strip-local-absolute is in effect, retain file symbols.
266 2004-06-20 Andreas Schwab <schwab@suse.de>
268 * config/tc-m68k.c (mri_chip): Replace current_chip, not augment.
269 (md_parse_option): Likewise.
271 2004-06-17 Jan Beulich <jbeulich@novell.com>
273 * config/tc-i386.c: Deal with LEX_QM the same way as with LEX_AT.
274 * config/te-netware.h: New file.
275 * config/te-ppcnw.h: Delete: Obsolete.
276 * configure.in: Eliminate ill NetWare targets. Make generic
277 NetWare target use proper emulation.
278 * Makefile.am: Eliminate reference to obsolete te-ppcnw.h, add
279 reference to new te-netware.h.
280 * configure: Regenerate.
281 * Makefile.in: Regenerate.
283 2004-06-15 Martin Schwidefsky <schwidefsky@de.ibm.com>
285 * config/tc-s390.c (s390_insn): Avoid incorrect signed/unsigned
286 comparison in .insn pseudo operation.
288 2004-06-15 Alan Modra <amodra@bigpond.net.au>
290 * config/obj-coff.c (coff_adjust_section_syms): Use
291 bfd_get_section_size instead of bfd_get_section_size_before_reloc.
292 (coff_frob_section): Likewise.
293 * config/tc-mips.c (md_apply_fix3): Likewise.
294 * config/obj-elf.c (elf_frob_file): Use bfd_set_section_size.
295 (elf_frob_file_after_relocs): Likewise.
297 2004-06-10 John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
299 * config/tc-hppa.c (log2): Rename to exact_log2.
300 (pa_next_subseg): Delete unused function.
301 (create_new_space): Mark unused arguments with ATTRIBUTE_UNUSED.
302 (create_new_subspace): Likewise.
305 * config/tc-hppa.c (hppa_fix_adjustable): Allow reduction of fake
308 2004-05-28 DJ Delorie <dj@redhat.com>
310 * config/tc-mn10300.h (tc_fix_adjustable): Define.
311 * config/tc-mn10300.c (mn10300_fix_adjustable): Don't adjust debug
312 or non-merged symbols.
314 2004-05-28 H.J. Lu <hongjiu.lu@intel.com>
316 * config/tc-ia64.c (remove_marked_resource): Save, clear and
317 restore the old slot when inserting srlz.i/srlz.d.
319 2004-05-28 Andrew Stubbs <andrew.stubbs@superh.com>
321 * Makefile.am: Regenerate dependecies.
322 * Makefile.in: Regenerate.
323 * config/tc-sh.c (valid_arch): Make unsigned.
324 (preset_target_arch): Likewise.
325 (md_begin): Use new architecture flags system.
326 (get_specific): Likewise.
327 (assemble_ppi): Likewise.
328 (md_assemble): Likewise. Also fix error check for bad opcodes.
329 (md_parse_option): Likewise. Also generate -isa values according
330 to the table in bfd/cpu-sh.c instead of just constants. Also
331 allow <arch>-up ISA variants.
332 (sh_elf_final_processing): Replace if-else chain with a call to
334 * testsuite/gas/sh/arch: New directory.
335 * testsuite/gas/sh/arch/arch.exp: New test script.
336 * testsuite/gas/sh/arch/arch_expected.txt: New file.
337 * testsuite/gas/sh/arch/sh.s: New file.
338 * testsuite/gas/sh/arch/sh2.s: New file.
339 * testsuite/gas/sh/arch/sh-dsp.s: New file.
340 * testsuite/gas/sh/arch/sh2e.s: New file.
341 * testsuite/gas/sh/arch/sh3-nommu.s: New file.
342 * testsuite/gas/sh/arch/sh3.s: New file.
343 * testsuite/gas/sh/arch/sh3-dsp.s: New file.
344 * testsuite/gas/sh/arch/sh3e.s: New file.
345 * testsuite/gas/sh/arch/sh4-nommu-nofpu.s: New file.
346 * testsuite/gas/sh/arch/sh4-nofpu.s: New file.
347 * testsuite/gas/sh/arch/sh4.s: New file.
348 * testsuite/gas/sh/arch/sh4a-nofpu.s: New file.
349 * testsuite/gas/sh/arch/sh4al-dsp.s: New file.
350 * testsuite/gas/sh/arch/sh4a.s: New file.
352 2004-05-28 Peter Barada <peter@the-baradas.com>
354 * config/gc-m68k.c(m68k_ip): Convert mode 5 addressing
355 with zero offset into mode 2 addressing to save a word.
357 2004-05-27 H.J. Lu <hongjiu.lu@intel.com>
359 * config/tc-ia64.c (ar_is_in_integer_unit): Removed.
360 (ar_is_only_in_integer_unit): New.
361 (ar_is_only_in_memory_unit): New.
362 (generate_unwind_image): Silence gcc on 32bit host.
363 (md_assemble): Use ar_is_only_in_integer_unit instead of
364 ar_is_in_integer_unit. Check AR access.
366 2004-05-27 Peter Barada <peter@the-baradas.com>
368 * config/tc-m68k.c (md_begin): Sort the opcode table into
370 (m68k_compare_opcode): New function to do the sorting.
372 2004-05-24 Peter Barada <peter@the-baradas.com>
374 * config/m68k-parse.y(operand): Allow for MAC/EMAC mask
375 addressing on MIT style operands.
376 * config/m68k-parse.y(yylex): Allow '-&' for predecrement
378 * config/tc-m68k.c(install_operand): Comment 'G' and 'H' type
381 2004-05-23 Alan Modra <amodra@bigpond.net.au>
383 * expr.c (operand, operator): Don't reject '++' and '--'.
385 2004-05-20 Richard Sandiford <rsandifo@redhat.com>
387 * config/tc-mips.c (append_insn): Use ISA-encoded addresses in MIPS16
390 2004-05-17 Adam Nemet <anemet@lnxw.com>
392 * configure.in: Add ppc-*-lynxos*. Update i386-*-lynxos* to ELF.
393 * configure: Regenerate.
395 2004-05-13 Paul Brook <paul@codesourcery.com>
397 * dw2gencfi.c (output_cie): Handle dwarf3 format CIE entries.
399 2004-05-13 Joel Sherrill <joel@oarcorp.com>
401 * configure.in (or32-*-rtems*): Switch to elf.
402 * configure: Regenerate.
404 2004-05-13 Nick Clifton <nickc@redhat.com>
406 * po/fr.po: Updated French translation.
408 2004-05-11 Nick Clifton <nickc@redhat.com>
410 * doc/as.texinfo (Section): Document G and T flags to .section
411 directive. Document the extra arguments that the G flag
412 requires. Document the #tls flag.
414 2004-05-11 H.J. Lu <hongjiu.lu@intel.com>
416 * subsegs.c (section_symbol): Create a new section symbol if
417 the existing one doesn't match.
418 * symbols.c (symbol_set_bfdsym): Don't reset BFD section symbol.
420 2004-05-07 Richard Sandiford <rsandifo@redhat.com>
422 * config/tc-mips.c (append_insn, mips_emit_delays): Extend -mfix-vr4120
423 to cope with VR4181A errata MD(1) and MD(4).
425 2004-05-07 Brian Ford <ford@vss.fsi.com>
427 * NEWS: Mention .secrel32 for pe[i]-i386.
429 2004-05-07 Alexandre Oliva <aoliva@redhat.com>
431 * config/tc-frv.h (MAX_MEM_FOR_RS_ALIGN_CODE): New.
434 2004-05-06 Daniel Jacobowitz <dan@debian.org>
436 * Makefile.am (DIST_SUBDIRS): Define.
437 * aclocal.m4: Regenerate with automake 1.8.4.
438 * Makefile.in: Likewise.
439 * doc/Makefile.in: Likewise.
441 2004-05-06 David Mosberger-Tang <davidm@hpl.hp.com>
443 * config/tc-ia64.c (dot_serialize): Declare.
444 (dot_serialize): New function.
445 (md_pseudo_table): Add ".serialize.data" and
446 ".serialize.instruction" directives.
448 2004-05-06 Nick Clifton <nickc@redhat.com>
450 * messages (as_internal_value_out_of_range): Print a message about
451 a value being out of range. Be consistent about whether the
452 values are printed in decimal or hexadecimal.
453 (as_warn_value_out_of_range): Generate a warning message about an
455 (as_bad_value_out_of_range): Generate an error message about an
457 * as.h: Prototype the new functions.
458 * config/tc-alpha.c (insert_operand): Use new function.
459 * config/tc-arc.c (arc_insert_operand): Likewise.
460 * config/tc-mn10200.c (mn10200_insert_operand): Likewise.
461 * config/tc-mn10300.c (mn10300_insert_operand): Likewise.
462 * config/tc-ppc.c (ppc_insert_operand): Likewise.
463 * config/tc-s390.c (s390_insert_operand): Likewise.
464 * config/tc-v850.c (v850_insert_operand): Likewise.
466 2004-05-05 Alexandre Oliva <aoliva@redhat.com>
468 * configure.in: Set em=linux for frv-*-*linux*.
469 * configure: Rebuilt.
470 * config/tc-frv.h (TARGET_FORMAT): Use elf32-frvfdpic if...
471 (frv_md_fdpic_enabled): New.
472 * config/tc-frv.c (frv_md_fdpic_enabled): New.
473 (DEFAULT_FDPIC): New.
474 (frv_flags): Use DEFAULT_FDPIC.
475 (frv_pic_flag): Likewise.
477 (md_longopts): Add -mnopic.
478 (md_parse_option): Handle it.
479 (md_show_usage): Add -mfdpic and -mnopic.
481 2004-05-05 Peter Barada <peter@the-baradas.com>
483 * config/tc-m68k.c: Add find_cf_chip to print list of valid
484 chips for invalid coldfire instructions, rename selectors
485 for ColdFire sub-variants, add 521x,5249,547x,548x and aliases,
486 add current_chip to track which chip is referred to(including save/restore),
487 use current_chip to select control registers, not current_arch.
488 (md_show_usage): Add new chips.
489 * doc/c-m68k.texi: Document new command line switches.
491 2004-05-05 Jakub Jelinek <jakub@redhat.com>
493 * tc-s390.h (md_do_align, HANDLE_ALIGN): Remove.
494 (NOP_OPCODE): Define.
495 (s390_align_code): Remove prototype.
496 * tc-s390.c (s390_align_code): Remove.
498 2004-05-04 H.J. Lu <hongjiu.lu@intel.com>
500 * config/tc-ia64.c (make_unw_section_name): Removed.
501 (start_unwind_section): New function.
502 (generate_unwind_image): Take const segT instead of const
504 (dot_handlerdata): Adjusted.
505 (dot_endp): Likewise.
507 2004-05-02 H.J. Lu <hongjiu.lu@intel.com>
509 * config/obj-elf.c (obj_elf_change_section): Allow the
510 ".note.GNU-stack" section has SHF_EXECINSTR.
512 2004-05-02 H.J. Lu <hongjiu.lu@intel.com>
514 * config/obj-elf.c (get_section): Return bfd_boolean.
515 (obj_elf_change_section): Call bfd_get_section_by_name_if
516 instead of bfd_map_over_sections.
518 2004-04-30 H.J. Lu <hongjiu.lu@intel.com>
520 * config/obj-elf.c (get_section): New function.
521 (obj_elf_change_section): Support multiple sections with same
524 2004-04-30 Nick Clifton <nickc@redhat.com>
526 * config/tc-arm.c (create_register_alias): Fix typo checking for
527 case sensitive register aliases.
528 (co_proc_number): Use error message string in all_reg_maps[]
530 (cp_reg_required_here): Likewise.
531 (fp_reg_required_here): Likewise.
533 2004-04-29 Brian Ford <ford@vss.fsi.com>
535 * dwarf2dbg.c (dwarf2_finish): Add SEC_DEBUGGING to section flags.
537 2004-04-28 Chris Demetriou <cgd@broadcom.com>
539 * config/tc-mips.c (HAVE_32BIT_ADDRESSES, append_insn, macro_build)
540 (load_address, macro, mips_ip, md_parse_option)
541 (mips_force_relocation, mips_validate_fix, md_apply_fix3)
542 (s_change_sec, pic_need_relax, tc_gen_reloc): Remove all
543 embedded-PIC handling, and update comments.
544 (SWITCH_TABLE): Remove.
545 * config/tc-mips.h (DIFF_EXPR_OK): Delete.
546 (enum mips_pic_level): Remove EMBEDDED_PIC.
547 (EXTERN_FORCE_RELOC): Remove embedded-PIC handling.
548 (TC_FORCE_RELOCATION): Update comment.
549 * ecoff.c (ecoff_build_lineno): Add comment about some code that
550 might be safe to remove now that MIPS embedded-PIC is gone.
552 2004-04-28 John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
554 * config/obj-som.c (obj_som_init_stab_section): Add new arguments in
555 call to obj_set_subsection_attributes.
556 (obj_som_init_stab_section): Likewise.
557 * config/tc-hppa.c (default_subspace_dict): Add comdat field.
558 (pa_def_subspaces): Provide comdat default.
559 (pa_subspace): Handle new "comdat" parameter. Set SEC_LINK_ONCE and
560 not SEC_IS_COMMON if section is comdat, common or dup_common. Update
561 calls to create_new_subspace and update_subspace to pass comdat flag.
562 (create_new_subspace, update_subspace): Add new comdat argument. Use
563 it in calls to obj_set_subsection_attributes.
564 * doc/c-hppa.texi (.subspa, .nsubspa): Document new comdat parameter
565 and use of comdat, common and dup_comm parameters.
567 2004-04-26 H.J. Lu <hongjiu.lu@intel.com>
569 * config/obj-elf.c (obj_elf_change_section): Check if the old
570 group name is NULL before comparison.
572 2004-04-23 Chris Demetriou <cgd@broadcom.com>
574 * config/tc-mips.h (mips_dwarf2_addr_size): Prototype.
576 2004-04-23 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
578 * config/tc-mips.c (s_mipsset): Set default CPU type for .set mipsN.
580 2004-04-23 Chris Demetriou <cgd@broadcom.com>
582 * config/tc-mips.c (md_longopts): Remove -membedded-pic option.
583 (OPTION_MEMBEDDED_PIC): Remove.
584 (OPTION_TRAP, OPTION_BREAK, OPTION_EB, OPTION_EL)
585 (OPTION_FP32, OPTION_GP32, OPTION_CONSTRUCT_FLOATS)
586 (OPTION_NO_CONSTRUCT_FLOATS, OPTIONS_FP64, OPTION_GP64)
587 (OPTION_RELAX_BRANCH, OPTION_NO_RELAX_BRANCH)
588 (OPTION_ELF_BASE): Renumber.
589 (md_parse_option): Remove OPTION_MEMBEDDED_PIC handling.
590 (md_show_usage): Remove mention of -membedded-pic.
591 * doc/as.texinfo: Remove mention of -membedded-pic.
593 2004-04-23 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
595 * config/tc-mips.h (USE_GLOBAL_POINTER_OPT): Remove.
596 * config/tc-mips.c (RDATA_SECTION_NAME, mips_target_format): Remove
598 (md_begin, mips_ip, md_parse_option, s_change_sec, s_option,
599 s_abicalls, nopic_need_relax, tc_gen_reloc): Remove uses of
600 USE_GLOBAL_POINTER_OPT.
602 2004-04-22 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
604 * config/tc-mips.c (macro): One more use of load_delay_nop.
606 2004-04-22 Atsushi Nemoto <anemo@mba.ocn.ne.jp>
608 * config/tc-mips.c (load_delay_nop): New function.
609 (load_address, macro): Use load_delay_nop() to build a nop
610 which can be omitted with gpr_interlocks.
612 2004-04-22 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
614 * config/tc-mips.c (hilo_interlocks, gpr_interlocks,
615 cop_interlocks): Remove superfluous CPU entries.
617 2004-04-22 Paul Brook <paul@codesourcery.com>
619 * config/tc-arm.c (mav_parse_offset): Value must be multiple of 4.
621 2004-04-22 Peter Barada <peter@the-baradas.com>
623 * NEWS: Added support for EMAC instructions and MAC/EMAC
625 * config/m68k-parse.h: Add ACC[123], ACCEXT{01,23}, MAC/EMAC
626 scale factor tokens, trailing_ampersand to mark mask addressing
627 for MAC/EMAC instructions.
628 * config/m68k-parse.y: Add options_ampersand clause, '<<',
630 (yylex): Handle '>', '<', and '&' following '+'.
631 * config/tc-m68k.c: Set mcfmac/mcfemac on appropriate ColdFire
632 architectures in archs[].
633 (m68k-ip): Add '4', 'e', 'g', 'i', cases to handle mask addressing
634 for MAC/EMAC instructions, ACC[0123], ACCEXT{01,23}, and '<<'/'>>'
636 (m68k_ip): Handle trailing '&' on MAC/EMAC insns.
637 (install_operand): Fix 'n' case, Add 'F', 'f', 'G', 'H', 'I', ']'
639 Add EMAC operands to init_table[].
641 2004-04-22 Bruno De Bus <bdebus@elis.ugent.be>
643 * config/tc-arm.h (enum mstate): Move here, add MAP_UNDEFINED
645 (TC_SEGMENT_INFO_TYPE): Define to enum mstate.
646 * config/tc-arm.c (enum mstate): Delete from here.
647 (mapping_state): Remove the static mapstate variable and instead
648 store the state in the segment. This allows a per-section mapping
649 state. Handle and ignore MAP_UNDEFINED states.
650 (arm_elf_change_section): Get the current mapping state from the
652 (s_ltorg): Set the mapping state to MAP_DATA.
653 (arm_cleanup): Use arm_elf_change_section to get the mapping state
654 for each pool as it is emitted.
656 2004-04-22 Nick Clifton <nickc@redhat.com>
658 * config/tc-arm.h: Formatting tidy ups.
660 2004-04-20 Chris Demetriou <cgd@broadcom.com>
662 * NEWS: Note that MIPS -membedded-pic option is deprecated.
664 2004-04-20 DJ Delorie <dj@redhat.com>
666 * config/tc-i386.h [TE_PE] (TC_CONS_FIX_NEW): Define.
667 * config/tc-i386.c (md_pseudo_table) [TE_PE]: Add "secrel32".
668 [TE_PE] (O_secrel): Define.
669 [TE_PE] (x86_pe_cons_fix_new): New.
670 [TE_PE] (pe_directive_secrel): Likewise.
671 (tc_gen_reloc) [TE_PE]: Support BFD_RELOC_32_SECREL.
673 2004-04-19 Eric Christopher <echristo@redhat.com>
675 * config/tc-mips.c (mips_dwarf2_addr_size): Revert part
676 of previous patch for fix in gcc.
678 2004-04-19 Jakub Jelinek <jakub@redhat.com>
680 * config/tc-xtensa.c (xg_assembler_literal): Fix a typo.
682 2004-04-19 Nathan Sidwell <nathan@codesourcery.com>
684 * read.c (do_align): Call md_flush_pending_output, if defined.
686 2004-04-16 Alan Modra <amodra@bigpond.net.au>
688 * expr.c (operand): Correct checks for ++ and --.
690 2004-04-14 H.J. Lu <hongjiu.lu@intel.com>
692 * config/tc-generic.c: Add some comments.
694 2004-04-14 Richard Sandiford <rsandifo@redhat.com>
696 * doc/c-mips.texi (-m{no-,}fix-vr4120): Renamed from
697 -{no-}mfix-vr4122-bugs.
698 * config/tc-mips.c (mips_fix_vr4120): Renamed from mips_fix_4122_bugs.
699 (append_insn, mips_emit_delays): Update accordingly.
700 (OPTION_FIX_VR4120, OPTION_NO_FIX_VR4120): Renamed from *VR4122.
701 (md_longopts): Change -{no-,}mfix-vr4122-bugs to -m{no-,}fix-vr4120.
702 (md_parse_option): Update after above changes.
703 (md_show_usage): Add -mfix-vr4120.
705 2004-04-13 Bob Wilson <bob.wilson@acm.org>
707 * doc/as.texinfo (Sub-Sections): Conditionalize COFF-specific use
708 of .section directive; add a reference to the ELF .subsection
711 2004-04-13 Kazuhiro Inaoka <inaoka.kazuhiro@renesas.com>
713 * config/tc-m32r.c (md_assemble): Fixed infinite loop bug
716 2004-04-11 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
718 * Makefile.am: Remove mips from aout targets.
719 * Makefile.in: Regenerate.
720 * configure.in: Remove mips-dec-bsd* target.
721 * configure: Regenerate.
723 2004-04-07 Alan Modra <amodra@bigpond.net.au>
726 * config/tc-ppc.c (ppc_elf_suffix): Add valid32 and valid64 fields
727 to struct map_bfd. Adjust MAP macro, and define MAP32, MAP64.
728 Update "mapping". Restrict some @ modifiers to 32 bit.
730 2004-04-01 Asgari Jinia <asgarij@kpitcummins.com>
731 Dhananjay Deshpande <dhananjayd@kpitcummins.com>
733 * config/tc-sh.c (dont_adjust_reloc_32): New variable.
734 (sh_fix_adjustable): Avoid adjusting BFD_RELOC_32 when
735 dont_adjust_reloc_32 is set.
736 (md_longopts): Add option -renesas.
737 (md_parse_option, md_show_usage): Likewise.
738 * doc/c-sh.texi: Likewise.
740 2004-04-01 Dave Korn <dk@artimi.com>
742 * config/tc-dlx.c (md_assemble): set fx_no_overflow flag for
743 hi16 and lo16 fixS structs.
744 (md_assemble): generate bit_fixS for RELOC_DLX_LO16 in
745 exactly the same way as for RELOC_DLX_REL16.
746 (machine_ip): properly respect LO flag in the_insn and
747 output RELOC_DLX_LO16 rather than RELOC_DLX_16.
748 (md_apply_fix3): apply RELOC_DLX_LO16.
750 2004-03-30 Stan Shebs <shebs@apple.com>
752 Remove long-obsolete MPW support.
753 * mpw-config.in, mpw-make.sed, mac-as.r: Remove files.
754 * configure.in: Remove mention of ppc-*-mpw* config.
755 * configure.in: Likewise.
757 2004-03-30 Nick Clifton <nickc@redhat.com>
759 * config/tc-arm.c (meabi_flags): Make its use conditional upon
760 OBJ_ELF being defined.
762 2004-03-27 Alan Modra <amodra@bigpond.net.au>
764 * config/obj-aout.c (obj_aout_type): Remove #ifdef BFD_ASSEMBLER code.
766 2004-03-23 Paul Brook <paul@codesourcery.com>
768 * config/tc-arm.c (meabi_flags): New variable.
769 (arm_parse_eabi): New function.
770 (md_begin): Set flags for EABI v3.
772 (arm_long_opts): Add meabi.
773 * doc/as.texinf <ARM>: Document -meabi.
774 * doc/c-arm.texi: Ditto.
776 2004-03-22 Bob Wilson <bob.wilson@acm.org>
778 * config/tc-xtensa.c (xtensa_post_relax_hook): Create literal
779 tables even when use_literal_section flag is not set.
781 2004-03-22 Alan Modra <amodra@bigpond.net.au>
783 * config/tc-sh.c: Remove trailing whitespace.
785 2004-03-22 Hans-Peter Nilsson <hp@axis.com>
787 * doc/c-cris.texi (CRIS-Opts): Document --no-mul-bug-abort,
788 --mul-bug-abort and the default behavior.
789 * config/tc-cris.c (cris_insn_kind): New member CRIS_INSN_MUL.
790 (err_for_dangerous_mul_placement): New variable.
791 (STATE_MUL, OPTION_MULBUG_ABORT_ON, OPTION_MULBUG_ABORT_OFF): New
793 (md_cris_relax_table): Have placeholder for STATE_MUL.
794 (md_longopts): New options --mul-bug-abort and --no-mul-bug-abort.
795 (cris_relax_frag) <case ENCODE_RELAX (STATE_MUL, STATE_BYTE)>: New
797 (md_estimate_size_before_relax) <case ENCODE_RELAX (STATE_MUL,
799 (md_convert_frag) <ENCODE_RELAX (STATE_MUL, STATE_BYTE)>: Check
800 alignment and position of this frag, emit error message if
802 (md_assemble): For a multiply insn and when checking it,
803 transform the current frag into a special frag for that purpose.
804 (md_parse_option) <case OPTION_MULBUG_ABORT_OFF, case
805 OPTION_MULBUG_ABORT_ON>: Handle new options.
807 2004-03-19 Bob Wilson <bob.wilson@acm.org>
809 * config/tc-xtensa.c (mark_literal_frags): New function.
810 (xtensa_move_literals): Call mark_literal_frags for all literal
811 segments, including init and fini literal segments.
812 (xtensa_post_relax_hook): Swap use of xt_insn_sec and xt_literal_sec.
814 2004-03-19 John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
816 * tc-hppa.c (cons_fix_new_hppa): Check for PC relative base type.
817 (pa_comm): Set BSF_OBJECT in symbol flags.
819 2004-03-19 Alan Modra <amodra@bigpond.net.au>
821 * Makefile.am: Run "make dep-am".
822 * Makefile.in: Regenerate.
823 * doc/Makefile.in: Regenerate.
824 * config.in: Regenerate.
825 * po/gas.pot: Regenerate.
827 2004-03-18 Nathan Sidwell <nathan@codesourcery.com>
829 * read.c (read_a_source_file): Use demand_empty_rest_of_line.
830 (demand_empty_rest_of_line): Issue an error here.
831 (ignore_rest_of_line): Silently skip to end.
832 (demand_copy_string): Issue an error, not warning.
834 * config/obj-elf.c (obj_elf_section_name): Likewise.
835 (obj_elf_section): Likewise.
836 * config/tc-arc.c (arc_extoper): Remove bogus NULL checks.
837 (arc_extinst): Likewise.
838 * config/tc-ia64.c (dot_saveb): Use demand_empty_rest_of_line.
839 (dot_spill): Likewise.
840 (dot_unwabi): Likewise.
841 (dot_prologue): Likewise.
843 * expr.c (operand): Reject ++ and --.
844 (operator): Likewise.
846 2004-03-17 Kaz Kojima <kkojima@rr.iij4u.or.jp>
848 * config/tc-sh.c: Include dw2gencfi.h.
849 (sh_cfi_frame_initial_instructions): New function.
850 (sh_regname_to_dw2regnum): Likewise.
851 * config/tc-sh.h (DWARF2_LINE_MIN_INSN_LENGTH): Move to the end of
853 (TARGET_USE_CFIPOP): Define.
854 (tc_cfi_frame_initial_instructions): Likewise.
855 (tc_regname_to_dw2regnum): Likewise.
856 (DWARF2_DEFAULT_RETURN_COLUMN, DWARF2_CIE_DATA_ALIGNMENT): Likewise.
857 * Makefile.am: Update dependencies.
858 * Makefile.in: Regenerate.
860 2004-03-17 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
862 * configure.in: Switch sh-*-rtems* to ELF. Add sh-*-rtemscoff*.
863 * configure: Regenerate.
865 2004-03-12 Bob Wilson <bob.wilson@acm.org>
867 * read.c (s_leb128): Call md_flush_pending_output.
869 2004-03-12 Michal Ludvig <mludvig@suse.cz>
871 * config/tc-i386.c (output_insn): Handle PadLock instructions.
872 * config/tc-i386.h (CpuPadLock): New define.
873 (CpuUnknownFlags): Added CpuPadLock.
875 2004-03-07 Andreas Schwab <schwab@suse.de>
877 * doc/c-hppa.texi (HPPA Directives): Fix typo.
879 2004-03-07 Richard Henderson <rth@redhat.com>
881 * dw2gencfi.c (output_cie): Align length to 4 byte boundary.
882 (cfi_finish): Likewise for fde.
884 2004-03-05 H.J. Lu <hongjiu.lu@intel.com>
886 * config/tc-ia64.c (md_assemble): Properly handle NULL
888 (ia64_handle_align): Don't abort if failed to add a stop bit.
890 2004-03-04 H.J. Lu <hongjiu.lu@intel.com>
892 * Makefile.in: Regenerated.
893 * aclocal.m4: Likewise.
894 * configure: Likewise.
895 * doc/Makefile.in: Likewise.
897 2004-03-03 H.J. Lu <hongjiu.lu@intel.com>
899 * config/tc-ia64.c (dot_align): New.
900 (ia64_do_align): Make it static.
901 (md_pseudo_table): Use "dot_align" for "align".
902 (ia64_md_do_align): Don't set align_frag here.
903 (ia64_handle_align): Add a stop bit to the previous bundle if
906 * config/tc-ia64.h (ia64_do_align): Removed.
908 2003-03-03 Andrew Stubbs <andrew.stubbs@superh.com>
910 * config/tc-sh.c (md_parse_option): Add -isa=sh4-nofpu and
911 -isa=sh4-nommu-nofpu options. Adjust help messages accordingly.
912 (sh_elf_final_processing): Output BFD type sh4_nofpu if that is
913 the most general type or the user specifically requested it.
914 (md_assemble): Add a new error message for when an instruction
915 is understood, but is not allowed due to an -isa option.
917 2004-03-02 H.J. Lu <hongjiu.lu@intel.com>
919 * config/tc-ia64.c (align_frag): New.
920 (md_assemble): Set the tc_frag_data field in align_frag for
921 IA64_OPCODE_FIRST instructions.
922 (ia64_md_do_align): Set align_frag.
923 (ia64_handle_align): Add a stop bit if needed.
925 * config/tc-ia64.h (TC_FRAG_TYPE): New.
928 2004-03-01 Richard Sandiford <rsandifo@redhat.com>
930 * config/tc-frv.c (fr400_audio): New variable.
931 (md_parse_option, md_show_usage): Add -mcpu=fr405 and -mcpu=fr450.
932 (md_parse_option): Set fr400_audio for -mcpu=fr400 and -mcpu=fr405.
933 (target_implements_insn_p): New function.
934 (md_assemble): Report an error if the processor doesn't implement
937 2004-02-27 Kazuhiro Inaoka <inaoka.kazuhiro@renesas.com>
939 * config/tc-m32r.c (md_longopts): Added -no-bitinst option.
940 (md_parse_option): Ditto.
941 (OPTION_NO_SPECIAL_M32R): Added.
942 (md_show_usage): Document it.
943 (enable_speial_m32r): Changed a default value from 0 to 1.
944 * doc/c-m32r.texi: Document the -no-bitinst option.
946 2004-02-27 Nick Clifton <nickc@redhat.com>
948 * config/tc-sh.c (get_operand): Revert previous delta.
949 (tc_gen_reloc): Check for an unknown reloc type before processing
952 2004-02-27 Hannes Reinecke <hare@suse.de>
954 * config/tc-s390.c (s390_insn): Correct range check for opcode in
955 .insn pseudo operation.
957 2004-02-27 Anil Paranjpe <anilp1@kpitcummins.com>
959 * config/tc-sh.c (get_operand): In case of #Imm, check has been
960 added for wrong syntax.
962 2004-02-26 Eric Christopher <echristo@redhat.com>
964 * config/tc-mips.c (mips_dwarf2_addr_size): New.
965 * config/tc-mips.h (DWARF2_ADDR_SIZE): Use.
967 2004-02-26 Andrew Stubbs <andrew.stubbs@superh.com>
969 * config/tc-sh.c (build_Mytes): Add REG_N_D and REG_N_B01
970 nibble types to assembler.
972 2004-02-25 Fred Fish <fnf@redhat.com>
974 * config/tc-iq2000.c: Add missing \n\ in multiline string literal.
976 2004-02-20 James E Wilson <wilson@specifixinc.com>
978 * config/tc-ia64.c (slot_index): New arg before_relax. Use instead of
980 (fixup_unw_records): New arg before_relax. Pass to slot_index.
981 (ia64_estimate_size_before_relax): New.
982 (ia64_convert_frag): Pass 0 to fixup_unw_records. Add comment.
983 (generate_unwind_image): Pass 1 to fixup_unw_records.
984 * config/tc-ia64.h (ia64_estimate_size_before_relax): Declare.
985 (md_estimate_size_before_relax): Call ia64_estimate_size_before_relax.
987 2004-02-19 Jakub Jelinek <jakub@redhat.com>
989 * stabs.c (generate_asm_file): Avoid warning about use of
990 uninitialized variable.
992 2004-02-18 David Mosberger <davidm@hpl.hp.com>
994 * config/tc-ia64.c (ia64_flush_insns): In addition to prologue,
995 body, and endp, allow unwind records which do not have a "t"
996 (time/instruction) field.
998 2004-02-17 Petko Manolov <petkan@nucleusys.com>
1000 * config/tc-arm.c (do_mav_dspsc_1): Correct offset of CRn.
1001 (do_mav_dspsc_2): Likewise.
1002 Fix accumulator registers move opcodes.
1004 2004-02-13 Hannes Reinecke <hare@suse.de>
1005 Jakub Jelinek <jakub@redhat.com>
1007 * dwarf2dbg.c (get_filenum): Do not read beyond allocated memory.
1009 2004-02-10 Steve Ellcey <sje@cup.hp.com>
1011 * config/tc-ia64.h (ia64_frob_symbol): New declaration.
1012 (tc_frob_symbol): New macro definition.
1013 * config/tc-ia64.c (ia64_frob_symbol): New routine.
1015 2004-02-09 Daniel Jacobowitz <drow@mvista.com>
1017 * config/tc-arm.c (md_begin): Mark .note.gnu.arm.ident as
1020 2004-02-09 Nathan Sidwell <nathan@codesourcery.com>
1022 * read.h (IGNORE_OPCODE_CASE): Do not define. Replace with ...
1023 (TC_CASE_SENSITIVE): ... this.
1024 * read.c: Replace IGNORE_OPCODE_CASE with TC_CASE_SENSITIVE.
1025 * doc/internals.texi (TC_CASE_SENSITIVE): Document.
1027 2004-02-06 James E Wilson <wilson@specifixinc.com>
1029 * config/tc-ia64.c (dot_endp): Delete call to output_endp.
1030 (generate_unwind_image): Re-add it here.
1032 2004-02-06 Nathan Sidwell <nathan@codesourcery.com>
1034 * dwarf2dbg.c (DWARF2_ADDR_SIZE): Remove trailing ';'
1035 * read.h (SKIP_WHITESPACE): Turn into an expression.
1036 * read.c (read_a_source_file): A pseudo is removed by having a
1039 2004-02-05 James E Wilson <wilson@specifixinc.com>
1041 * config/tc-ia64.c (output_endp): New.
1042 (count_bits): Delete.
1043 (ia64_flush_insns, process_one_record, optimize_unw_records): Handle
1044 endp unwind records.
1045 (fixup_unw_records): Handle endp unwind records. Delete code for
1046 shortening prologue regions not followed by a body record.
1047 (dot_endp): Call add_unwind_entry to emit endp unwind record.
1048 * config/tc-ia64.h (unw_record_type): Add endp.
1050 2004-02-03 James E Wilson <wilson@specifixinc.com>
1052 * config/tc-ia64.c (ia64_convert_frag): Call md_number_to_chars to
1053 fill padding bytes with zeroes.
1054 (emit_one_bundle): New locals last_ptr, end_ptr. Rewrite code that
1055 sets unwind_record slot_number and slot_frag fields.
1057 2004-02-02 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
1059 * config/tc-mips.c (add_got_offset_hilo): New function.
1060 (macro): Use load_register() and add_got_offset_hilo() to load
1061 constants instead of hardcoding code sequences throughout.
1063 2004-01-28 H.J. Lu <hongjiu.lu@intel.com>
1065 * config/tc-ia64.c (emit_one_bundle): Add proper indentation.
1067 2004-01-26 Bernardo Innocenti <bernie@develer.com>
1069 * config/tc-m68k.h (EXTERN_FORCE_RELOC): Handle m68k-uclinux specially,
1071 * config/tc-m68k.c (RELAXABLE_SYMBOL): Use EXTERN_FORCE_RELOC instead
1072 of hard-coded test for TARGET_OS=elf.
1074 2004-01-24 Chris Demetriou <cgd@broadcom.com>
1076 * config/tc-mips.c (hilo_interlocks): Change definition
1077 so that MIPS32, MIPS64 and later ISAs are included, along with
1078 the already-included machines. Update comments.
1080 2004-01-23 Daniel Jacobowitz <drow@mvista.com>
1082 * config/tc-arm.c (tc_gen_reloc): Improve error message for
1083 undefined local labels.
1085 2004-01-23 Richard Sandiford <rsandifo@redhat.com>
1087 * config/tc-mips.c (load_address, macro): Update comments about
1088 NewABI GP relaxation.
1090 2004-01-23 Richard Sandiford <rsandifo@redhat.com>
1092 * config/tc-mips.c (macro_build): Remove place and counter arguments.
1093 (mips_build_lui, macro_build_ldst_constoffset): Likewise.
1094 (mips16_macro_build, macro_build_jalr): Remove counter argument.
1095 (set_at, load_register, load_address, move_register): Likewise.
1096 (load_got_offset, add_got_offset): Likewise.
1097 Update all calls and tidy accordingly.
1099 2004-01-23 Richard Sandiford <rsandifo@redhat.com>
1101 * config/tc-mips.c (RELAX_ENCODE): Remove WARN argument.
1102 (RELAX_FIRST, RELAX_SECOND): Turn into 8-bit quantities.
1103 (RELAX_USE_SECOND): Bump to 0x10000.
1104 (RELAX_SECOND_LONGER, RELAX_NOMACRO, RELAX_DELAY_SLOT): New flags.
1105 (mips_macro_warning): New variable.
1106 (md_assemble): Wrap macro expansion in macro_start() and macro_end().
1107 (s_cpload, s_cpsetup, s_cprestore, s_cpreturn): Likewise.
1108 (relax_close_frag): Set mips_macro_warning.first_frag. Adjust use
1110 (append_insn): Update mips_macro_warning.sizes.
1111 (macro_start, macro_warning, macro_end): New functions.
1112 (macro_build): Don't emit warnings here.
1113 (macro_build_lui, md_estimate_size_before_relax): ...or here.
1114 (md_convert_frag): Check for cases where one macro alternative
1115 needs a warning and the other doesn't. Emit a warning if the
1116 longer sequence was chosen.
1118 2004-01-23 Richard Sandiford <rsandifo@redhat.com>
1120 * config/tc-mips.h (tc_frag_data_type, TC_FRAG_TYPE): Remove.
1121 * config/tc-mips.c (RELAX_ENCODE): Take three arguments: the size of
1122 the first sequence, the size of the second sequence, and a flag
1123 that says whether we should warn.
1124 (RELAX_OLD, RELAX_NEW, RELAX_RELOC[123]): Delete.
1125 (RELAX_FIRST, RELAX_SECOND): New.
1126 (mips_relax): New variable.
1127 (relax_close_frag, relax_start, relax_switch, relax_end): New fns.
1128 (append_insn): Remove "place" argument. Use mips_relax.sequence
1129 rather than "place" to check whether we're expanding the second
1130 alternative of a relaxable macro. Remove redundant check for
1131 branch relaxation. If generating a normal insn, and there
1132 is not enough room in the current frag, call relax_close_frag()
1133 to close it. Update mips_relax.sizes[]. Emit fixups for the
1134 second version of a relaxable macro. Record the first relaxable
1135 fixup in mips_relax. Remove tc_gen_reloc workaround.
1136 (macro_build): Remove all uses of "place". Use mips_relax.sequence
1137 in the same way as in append_insn.
1138 (mips16_macro_build): Remove "place" argument.
1139 (macro_build_lui): As for macro_build. Don't drop the add_symbol
1140 when generating the second version of a relaxable macro.
1141 (load_got_offset, add_got_offset): New functions.
1142 (load_address, macro): Use new relaxation machinery. Remove
1143 tc_gen_reloc workarounds.
1144 (md_estimate_size_before_relax): Set RELAX_USE_SECOND if the second
1145 version of a relaxable macro is needed. Return -RELAX_SECOND if the
1146 first version is needed.
1147 (tc_gen_reloc): Remove relaxation handling.
1148 (md_convert_frag): Go through the fixups for a relaxable macro and
1149 mark those that belong to the unneeded alternative as done. If the
1150 second alternative is needed, adjust the fixup addresses to account
1151 for the deleted first alternative.
1153 2004-01-23 Richard Sandiford <rsandifo@redhat.com>
1155 * frags.h (frag_room): Declare.
1156 * frags.c (frag_room): New function.
1157 * doc/internals.texi: Document it.
1159 2004-01-22 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
1161 * config/tc-mips.c (append_insn): Don't do r3900 interlock
1162 optimization for -mtune=r3900, as this will break on other CPUs.
1164 2004-01-11 Tom Rix <tcrix@worldnet.att.net>
1166 * config/tc-m68hc11.c (build_indexed_byte): movb and movw cannot
1167 be relaxed, use fixup.
1168 (md_apply_fix3): Use 5 bit reloc from movb and movw fixup.
1170 2004-01-19 Jakub Jelinek <jakub@redhat.com>
1172 * config/tc-sparc.c (sparc_ip): Disallow %f32-%f63 for single
1175 2004-01-14 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
1177 * config/tc-mips.c (append_insn): Properly detect variant frags
1178 that preclude swapping of relaxed branches. Correctly swap
1179 instructions between frags when dealing with relaxed branches.
1181 2004-01-14 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
1183 * acinclude.m4: Quote names of macros to be defined by AC_DEFUN
1185 * aclocal.m4: Regenerate.
1186 * configure: Regenerate.
1188 2004-01-12 Anil Paranjpe <anilp1@KPITCummins.com>
1190 * config/tc-h8300.c (build_bytes): Apply relaxation to bit
1193 2004-01-12 Richard Sandiford <rsandifo@redhat.com>
1195 * config/tc-mips.c (macro_build_jalr): When adding an R_MIPS_JALR
1196 reloc, reserve space for the delay slot as well as the jalr itself.
1198 2004-01-09 Paul Brook <paul@codesourcery.com>
1200 * config/tc-arm.c (do_vfp_reg2_from_sp2): Rename from do_vfp_sp_reg2.
1201 (do_vfp_sp2_from_reg2): New function.
1203 (do_vfp_dp_from_reg2): Check return values properly.
1205 2004-01-08 Ian Lance Taylor <ian@wasabisystems.com>
1207 * config/tc-mips.c (warn_nops): Remove static variable.
1208 (macro): Remove test of warn_nops.
1209 (md_shortops): Remove 'n'.
1210 (md_parse_option): Remove 'n' case.
1211 (md_show_usage): Remove -n.
1212 * doc/as.texinfo (Overview): Remove MIPS -n option.
1213 * doc/c-mips.texi (MIPS Opts): Remove mention -n.
1214 * NEWS: Mention removal of MIPS -n option.
1216 * config/tc-mips.c (ISA_HAS_COPROC_DELAYS): Remove.
1217 (cop_interlocks): Check ISA level.
1218 (cop_mem_interlocks): Define.
1219 (reg_needs_delay): Check cop_interlocks rather than
1220 ISA_HAS_COPROC_DELAYS.
1221 (append_insn): Likewise. Use cop_mem_interlocks rather than
1222 directly checking mips_opts.isa.
1223 (mips_emit_delays): Likewise.
1225 2004-01-07 H.J. Lu <hongjiu.lu@intel.com>
1227 * config/tc-ia64.c (unwind): Move next_slot_number and
1228 next_slot_frag to ...
1229 (unw_rec_list): Here.
1230 (free_list_records): Removed.
1231 (output_unw_records): Likewise.
1232 (generate_unwind_image): Make it void.
1233 (alloc_record): Initialize next_slot_number and next_slot_frag.
1234 (slot_index): Take .org, .space and .align into account.
1235 (fixup_unw_records): Don't set slot_number to 0. Use
1236 list->next_slot_number and list->next_slot_frag instead of
1237 unwind.next_slot_number and unwind.next_slot_frag.
1238 (ia64_convert_frag): New.
1239 (generate_unwind_image): Generate a rs_machine_dependent frag
1241 (emit_one_bundle): Use list->next_slot_number and
1242 list->next_slot_frag instead of unwind.next_slot_number and
1243 unwind.next_slot_frag.
1245 * config/tc-ia64.h (md_convert_frag): Defined as
1247 (md_estimate_size_before_relax): Defined as (f)->fr_var.
1249 2004-01-06 Alexandre Oliva <aoliva@redhat.com>
1251 2003-12-19 Alexandre Oliva <aoliva@redhat.com>
1252 * config/tc-frv.h (md_apply_fix3): Don't define.
1253 * config/tc-frv.c (md_apply_fix3): New. Shift/truncate %hi/%lo
1255 * config/tc-frv.h (TC_FORCE_RELOCATION_SUB_LOCAL): Define.
1256 2003-10-07 Alexandre Oliva <aoliva@redhat.com>
1257 * config/tc-frv.c (line_separator_chars): Add `!'.
1258 2003-09-19 Alexandre Oliva <aoliva@redhat.com>
1259 * config/tc-frv.c (md_assemble): Clear insn upfront.
1260 2003-09-18 Alexandre Oliva <aoliva@redhat.com>
1261 * config/tc-frv.c (OPTION_FDPIC): New macro.
1262 (md_longopts): Add mfdpic.
1263 (md_parse_option): Handle it.
1264 2003-08-04 Alexandre Oliva <aoliva@redhat.com>
1265 * config/tc-frv.c (md_cgen_lookup_reloc) <FRV_OPERAND_D12,
1266 FRV_OPERAND_S12>: Use reloc type encoded in fix-up.
1267 (frv_pic_ptr): Parse funcdesc.
1269 2004-01-05 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
1271 * doc/as.texinfo: Let texi2pod parse asconfig.texi and
1272 gasver.texi. Remove duplicate symbol definitions for texi2pod.
1274 2004-01-05 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
1276 * Makefile.am (Makefile): Move the dependency on
1277 $(BFDDIR)/configure.in to...
1278 (CONFIG_STATUS_DEPENDENCIES): ... here.
1279 (AUTOMAKE_OPTIONS): Require automake 1.8.
1280 * Makefile.in: Regenerate.
1281 * doc/Makefile.am (BASEDIR, BFDDIR): Define.
1282 (CONFIG_STATUS_DEPENDENCIES): Add a dependency on
1283 $(BFDDIR)/configure.in here as well.
1284 * doc/Makefile.in: Regenerate.
1286 2004-01-05 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
1288 * Makefile.am (install, install-info, RECURSIVE_TARGETS): Remove.
1289 * Makefile.in: Regenerate.
1290 * aclocal.m4: Regenerate.
1291 * doc/Makefile.am (install, install-info): Remove.
1292 (install-data-local): A new hook for install-info.
1293 (AUTOMAKE_OPTIONS): Require automake 1.8.
1294 * doc/Makefile.in: Regenerate.
1296 2004-01-02 Nutan Singh <nutan@kpitcummins.com>
1298 * doc/c-sh.texi: Update description about floating point behavior
1301 2004-01-02 Bernardo Innocenti <bernie@develer.com>
1303 * configure.in: Add m68k-uClinux target.
1304 * configure: Regenerate.
1306 For older changes see ChangeLog-0203
1312 version-control: never