gas/ChangeLog

   1 2014-09-15  Matthew Fortune  <matthew.fortune@imgtec.com>
   2
   3         * tc-mips.c (check_fpabi): Move softfloat and singlefloat
   4         checks higher.
   5
   6 2014-09-12  Jose E. Marchesi  <jose.marchesi@oracle.com>
   7
   8         * config/tc-sparc.c (sparc_ip): Update the set of allowed hwcaps
   9         when bumping the current architecture.
  10         (md_begin): Adjust the highetst architecture level also when a
  11         specific architecture is not requested.
  12
  13 2014-09-12  Andrew Bennett  <andrew.bennett@imgtec.com>
  14
  15         * configure.tgt: Add mips*-img-elf* target triple.
  16
  17 2014-09-12  Alan Modra  <amodra@gmail.com>
  18
  19         * config/tc-i386.c (match_template): Remove redundant "!!" testing
  20         single-bit bitfields.
  21         (build_modrm_byte): Don't compare single-bit bitfields to "1".
  22
  23 2014-09-09  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>
  24
  25         * config/tc-arm.c (arm_cpus): Add cortex-a17.
  26
  27 2014-09-03  Jiong Wang  <jiong.wang@arm.com>
  28
  29         * config/tc-aarch64.c (parse_sys_reg): Remove the restriction on op0
  30         field.
  31
  32 2014-09-03  Jiong Wang  <jiong.wang@arm.com>
  33
  34         * config/tc-aarch64.c (parse_operands): Recognize PAIRREG.
  35         (aarch64_features): Add entry for lse extension.
  36
  37 2014-08-26  Jiong Wang  <jiong.wang@arm.com>
  38
  39         * config/tc-arm.c (aeabi_set_public_attributes): Update selected_cpu
  40         based on the info we got during parsing.
  41         (arm_handle_align): Make sure the p2align expanding logic under thumb
  42         unchanged.
  43
  44 2014-08-26  Maciej W. Rozycki  <macro@codesourcery.com>
  45
  46         * config/tc-mips.c (macro) <M_SAA_AB>: Remove duplicate code and
  47         jump to...
  48         <M_SAAD_AB>: ... here.  Assert that !microMIPS.
  49
  50 2014-08-26  Jan-Benedict Glaw  <jbglaw@lug-owl.de>
  51
  52         * config/tc-moxie.h (md_convert_frag): Silence warning.
  53
  54 2014-08-22  Richard Henderson  <rth@redhat.com>
  55
  56         * config/tc-aarch64.c (tc_aarch64_regname_to_dw2regnum): Fix
  57         register number for vector register types.
  58         * config/tc-aarch64.h (DWARF2_LINE_MIN_INSN_LENGTH): Set to 4.
  59         (DWARF2_CIE_DATA_ALIGNMENT): Set to -8.
  60
  61 2014-08-22  Maciej W. Rozycki  <macro@codesourcery.com>
  62
  63         * config/tc-ppc.c (md_assemble): Only set the PPC_APUINFO_VLE
  64         flag if both the processor and opcode flags match.
  65
  66 2014-08-22  Maciej W. Rozycki  <macro@codesourcery.com>
  67
  68         * config/tc-arm.c (add_to_lit_pool): Preinitialize `imm1'.
  69
  70 2014-08-20  Maciej W. Rozycki  <macro@codesourcery.com>
  71
  72         * dw2gencfi.c (make_debug_seg): Replace leading spaces with tabs.
  73         (dot_cfi_val_encoded_addr, output_cfi_insn): Likewise.
  74         (output_cie, cfi_change_reg_numbers, cfi_finish): Likewise.
  75
  76 2014-08-20  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>
  77
  78         * config/tc-arm.c (parse_ifimm_zero): New function.
  79         (enum operand_parse_code): Add OP_RSVD_FI0 value.
  80         (parse_operands): Handle OP_RSVD_FI0.
  81         (asm_opcode_insns): Use RSVD_FI0 for second operand of vcmp, vcmpe.
  82
  83 2014-08-20  Alan Modra  <amodra@gmail.com>
  84
  85         * Makefile.am: Typo fix.
  86         * Makefile.in: Regenerate.
  87         * po/POTFILES.in: Regenerate.
  88
  89 2014-08-19  Andreas Tobler  <andreast@fgznet.ch>
  90
  91         * Makefile.am: Add FreeBSD ARM support.
  92         * Mafefile.in: Regenerate.
  93         * configure.tgt: Add FreeBSD ARM support.
  94         * config/te-armfbsdeabi.h: New file.
  95         * config/te-armfbsdvfp.h: Likewise.
  96
  97 2014-08-19  Alan Modra  <amodra@gmail.com>
  98
  99         * configure: Regenerate.
 100
 101 2014-08-18  Nick Clifton  <nickc@redhat.com>
 102
 103         * config/tc-rl78.c (md_apply_fix): Correct handling of small sized
 104         RELOC_RL78_DIFF fixups.
 105
 106 2014-08-18  Alan Modra  <amodra@gmail.com>
 107
 108         * read.c (parse_mri_cons): Warning fix.
 109
 110 2014-08-14  Alan Modra  <amodra@gmail.com>
 111
 112         * configure.ac: Move ACX_LARGEFILE after LT_INIT.
 113         * config.in: Regenerate.
 114         * configure: Regenerate.
 115
 116 2014-08-06  Ilya Tocar  <ilya.tocar@intel.com>
 117
 118         * config/tc-i386.c (omit_lock_prefix): New.
 119         (output_insn): Omit lock prefix if omit_lock_prefix is true.
 120         (OPTION_omit_lock_prefix): New.
 121         (md_longopts): Add momit-lock-prefix.
 122         (md_parse_option): Handle momit-lock-prefix.
 123         (md_show_usage): Add momit-lock-prefix=[no|yes].
 124         * doc/c-i386.texi (momit-lock-prefix): Document.
 125
 126 2014-08-01  Takashi Yoshii  <yoshii.takashi@renesas.com>
 127
 128         PR 10378
 129         * config/tc-sh.c (tc_gen_reloc): Fix initialization of addend in
 130         SWITCH_TABLE case.
 131
 132 2014-07-29  Matthew Fortune  <matthew.fortune@imgtec.com>
 133
 134         * config/tc-mips.c: Rename INSN_LOAD_COPROC_DELAY to INSN_LOAD_COPROC
 135         and INSN_COPROC_MOVE_DELAY to INSN_COPROC_MOVE throughout.
 136
 137 2014-07-29  Matthew Fortune  <matthew.fortune@imgtec.com>
 138
 139         * config/tc-mips.c (mips_flags_frag): New static global.
 140         (struct mips_set_options): Add oddspreg field.
 141         (file_mips_opts, mips_opts): Initialize oddspreg.
 142         (ISA_HAS_ODD_SINGLE_FPR): Add CPU argument and update for R5900 and
 143         Loongson-3a.
 144         (enum options, md_longopts, md_parse_option): Add -mfpxx, -modd-spreg
 145         and -mno-odd-spreg options.
 146         (md_begin): Create .MIPS.abiflags section.
 147         (fpabi_incompatible_with, fpabi_requires): New static function.
 148         (check_fpabi): Likewise.
 149         (mips_check_options): Handle fp=xx and oddspreg restrictions.
 150         (file_mips_check_options): Set oddspreg by default for fp=xx.
 151         (mips_oddfpreg_ok): Re-write function.
 152         (check_regno): Check odd numbered registers regardless of FPR size.
 153         For fp != 32 use as_bad instead of as_warn.
 154         (match_float_constant): Rewrite check regarding FP register width.  Add
 155         support for generating constants when MXHC1 is present.  Handle fp=xx
 156         to comply with the ABI.
 157         (macro): Update M_LI_DD similarly to match_float_constant.  Generate
 158         MTHC1 when available.  Check that correct code can be generated for
 159         fp=xx and fp=64 ABIs.
 160         (parse_code_option, s_mipsset): Add fp=xx, oddspreg and nooddspreg
 161         options.
 162         (mips_convert_ase_flags): New static function.
 163         (mips_elf_final_processing): Use fpabi == Val_GNU_MIPS_ABI_FP_OLD_64
 164         to determine when to add the EF_MIPS_FP64 flag.  Populate the
 165         .MIPS.abiflags section.
 166         (md_mips_end): Update .gnu_attribute based on command line and .module
 167         as applicable.  Use check_fpabi to ensure .gnu.attribute and command
 168         line/.module options are consistent.
 169         * doc/as.texinfo: Add missing -mgp64/-mfp64 options and document new
 170         -mfpxx, -modd-spreg and -mno-odd-spreg options.
 171         * doc/c-mips.texi: Document -mfpxx, -modd-spreg, -mno-odd-spreg,
 172         gnu_attribute values and FP ABIs.
 173
 174 2014-07-27  Joel Sherrill <joel.sherrill@oarcorp.com>
 175
 176         Add RTEMS target support and simplify matching
 177
 178         * gas/configure.tgt (or1k*-*-rtems*): Ensure a match.
 179         (or1k*-*-*): Use or1k* to match or1knd and or1kZ.
 180
 181 2014-07-27  Anthony Green  <green@moxielogic.com>
 182
 183         * configure.tgt (generic_target): Add moxie-*-moxiebox*
 184         * config/tc-moxie.c: Remove moxie_target_format.
 185         (md_begin): Set default target_big_endian.
 186         * config/tc-moxie.h: Only set TARGET_BYTES_BIG_ENDIAN if unset.
 187         (TARGET_FORMAT): Set based on target_big_endian.
 188
 189 2014-07-26  Alan Modra  <amodra@gmail.com>
 190
 191         * config/bfin-parse.y: Don't include obstack.h.
 192         * config/obj-aout.c: Likewise.
 193         * config/obj-coff.c: Likewise.
 194         * config/obj-som.c: Likewise.
 195         * config/tc-bfin.c: Likewise.
 196         * config/tc-i960.c: Likewise.
 197         * config/tc-rl78.c: Likewise.
 198         * config/tc-rx.c: Likewise.
 199         * config/tc-tic4x.c: Likewise.
 200         * expr.c: Likewise.
 201         * listing.c: Likewise.
 202         * config/obj-elf.c (elf_file_symbol): Make name_length a size_t.
 203         * config/tc-aarch64.c (symbol_locate): Likewise.
 204         * config/tc-arm.c (symbol_locate): Likewise.
 205         * config/tc-mmix.c (mmix_handle_mmixal): Make len_0 a size_t.
 206         * config/tc-score.c (s3_build_score_ops_hsh): Make len a size_t.
 207         (s3_build_dependency_insn_hsh): Likewise.
 208         * config/tc-score7.c (s7_build_score_ops_hsh): Likewise.
 209         (s7_build_dependency_insn_hsh): Likewise.
 210         * frags.c (frag_grow): Make parameter a size_t, and use size_t locals.
 211         (frag_new): Make parameter a size_t.
 212         (frag_var_init): Make max_chars and var parameters size_t.
 213         (frag_var, frag_variant): Likewise.
 214         (frag_room): Return a size_t.
 215         (frag_align_pattern): Make n_fill parameter a size_t.
 216         * frags.h: Update function prototypes.
 217         * symbols.c (save_symbol_name): Make name_length a size_t.
 218
 219 2014-07-22  Sergey Guriev  <sergey.s.guriev@intel.com>
 220             Alexander Ivchenko  <alexander.ivchenko@intel.com>
 221             Maxim Kuznetsov  <maxim.kuznetsov@intel.com>
 222             Sergey Lega  <sergey.s.lega@intel.com>
 223             Anna Tikhonova  <anna.tikhonova@intel.com>
 224             Ilya Tocar  <ilya.tocar@intel.com>
 225             Andrey Turetskiy  <andrey.turetskiy@intel.com>
 226             Ilya Verbin  <ilya.verbin@intel.com>
 227             Kirill Yukhin  <kirill.yukhin@intel.com>
 228             Michael Zolotukhin  <michael.v.zolotukhin@intel.com>
 229
 230         * config/tc-i386.c (cpu_arch): Add .avx512dq, CPU_AVX512DQ_FLAGS.
 231         * doc/c-i386.texi: Document avx512dq/.avx512dq.
 232
 233 2014-07-22  Sergey Guriev  <sergey.s.guriev@intel.com>
 234             Alexander Ivchenko  <alexander.ivchenko@intel.com>
 235             Maxim Kuznetsov  <maxim.kuznetsov@intel.com>
 236             Sergey Lega  <sergey.s.lega@intel.com>
 237             Anna Tikhonova  <anna.tikhonova@intel.com>
 238             Ilya Tocar  <ilya.tocar@intel.com>
 239             Andrey Turetskiy  <andrey.turetskiy@intel.com>
 240             Ilya Verbin  <ilya.verbin@intel.com>
 241             Kirill Yukhin  <kirill.yukhin@intel.com>
 242             Michael Zolotukhin  <michael.v.zolotukhin@intel.com>
 243
 244         * config/tc-i386.c (cpu_arch): Add .avx512bw, CPU_AVX512BW_FLAGS.
 245         * doc/c-i386.texi: Document avx512bw/.avx512bw.
 246
 247 2014-07-22  Sergey Guriev  <sergey.s.guriev@intel.com>
 248             Alexander Ivchenko  <alexander.ivchenko@intel.com>
 249             Maxim Kuznetsov  <maxim.kuznetsov@intel.com>
 250             Sergey Lega  <sergey.s.lega@intel.com>
 251             Anna Tikhonova  <anna.tikhonova@intel.com>
 252             Ilya Tocar  <ilya.tocar@intel.com>
 253             Andrey Turetskiy  <andrey.turetskiy@intel.com>
 254             Ilya Verbin  <ilya.verbin@intel.com>
 255             Kirill Yukhin  <kirill.yukhin@intel.com>
 256             Michael Zolotukhin  <michael.v.zolotukhin@intel.com>
 257
 258         * config/tc-i386.c (cpu_arch): Add .avx512vl, CPU_AVX512VL_FLAGS.
 259         (build_vex_prefix): Don't abort on VEX.W.
 260         (check_VecOperands): Support BROADCAST_1TO4 and BROADCAST_1TO2.
 261         (check_VecOperations): Ditto.
 262         * doc/c-i386.texi: Document avx512vl/.avx512vl.
 263
 264 2014-07-21  Joel Sherrill  <joel.sherrill@oarcorp.com>
 265
 266         Add or reactivate or1k-*-rtems*
 267         * gas/configure.tgt (or1k-*-rtems*): Add.
 268
 269 2014-07-17  Ilya Tocar  <ilya.tocar@intel.com>
 270
 271         * config/tc-i386.c (parse_register): Set need_vrex.
 272
 273 2014-07-15  Jiong Wang  <jiong.wang@arm.com>
 274
 275         * config/tc-arm.c (add_to_lit_pool): Use "inst.operands[1].imm" for
 276         sign extension.  Casting the type of imm1 and imm2 to offsetT.  Fix
 277         one logic error when checking X_op.
 278
 279 2014-07-14  Andreas Schwab  <schwab@linux-m68k.org>
 280
 281         * config/tc-m68k.c (md_convert_frag_1): Don't complain with
 282         --pcrel about TAB (DBCCLBR, LONG) conversion.
 283
 284 2014-07-12  David Majnemer  <david.majnemer@gmail.com>
 285
 286         * read.c (assign_symbol): Don't force "set" symbols local for PE.
 287
 288 2014-07-08  Jiong Wang  <jiong.wang@arm.com>
 289
 290         * config/tc-arm.c (literal_pool): New field "alignment".
 291         (find_or_make_literal_pool): Initialize "alignment" to 2.
 292         (s_ltorg): Align the pool using value of "alignment"
 293         (parse_big_immediate): New parameter "in_exp". Return
 294         parsed expression if "in_exp" is not null.
 295         (parse_address_main): Invoke "parse_big_immediate" for
 296         constant parameter.
 297         (add_to_lit_pool): Add one parameter 'nbytes'.
 298         Split 8 byte entry into two 4 byte entry.
 299         Add padding to align 8 byte entry to 8 byte boundary.
 300         (encode_arm_cp_address): Generate literal pool entry if possible.
 301         (move_or_literal_pool): Generate entry for vldr case.
 302         (enum lit_type): New enum type.
 303         (do_ldst): Use new enum type.
 304         (do_ldstv4): Likewise.
 305         (do_t_ldst): Likewise.
 306         (neon_write_immbits): Support Thumb-2 mode.
 307
 308 2014-07-07  Barney Stratford  <barney_stratford@fastmail.fm>
 309
 310         * config/tc-avr.c (avr_operand): Permit referring to r26-r31 by
 311         name as [xyz][hl].  Permit using a symbol whoes name begins with
 312         ‘r’ to refer to a register.
 313         Allow arbitrary expressions for the P and p operators.
 314         (md_apply_fix): Check the BFD_RELOC_AVR_PORT5 and
 315         BFD_RELOC_AVR_PORT6 relocations.
 316
 317 2014-07-04  Alan Modra  <amodra@gmail.com>
 318
 319         * doc/internals.texi: Update "configure.in" comments.
 320         * acinclude.m4: Likewise.
 321         * config/tc-sparc.c: Likewise.
 322
 323 2014-07-04  Alan Modra  <amodra@gmail.com>
 324
 325         * configure.ac: Rename from configure.in.
 326         * Makefile.in: Regenerate.
 327         * config.in: Regenerate.
 328         * doc/Makefile.in: Regenerate.
 329
 330 2014-07-04  Alan Modra  <amodra@gmail.com>
 331
 332         * doc/Makefile.am (CONFIG_STATUS_DEPENDENCIES): Delete.
 333         * doc/Makefile.in: Regenerate.
 334
 335 2014-07-04  Alan Modra  <amodra@gmail.com>
 336
 337         * configure.in: Include bfd/version.m4.
 338         (AC_INIT, AM_INIT_AUTOMAKE): Use modern form.
 339         (BFD_VERSION): Delete.
 340         * configure.com: Get bfd version from bfd/version.m4.
 341         * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in.
 342         * configure: Regenerate.
 343         * Makefile.in: Regenerate.
 344         * doc/Makefile.in: Regenerate.
 345
 346 2014-07-01  Barney Stratford   <barney_stratford@fastmail.fm>
 347             Senthil Kumar Selvaraj  <senthil_kumar.selvaraj@atmel.com>
 348             Pitchumani Sivanupandi  <pitchumani.s@atmel.com>
 349             Soundararajan  <Sounderarajan.D@atmel.com>
 350
 351         * config/tc-avr.c (mcu_types): Add avrtiny arch.
 352         Add avrtiny arch devices attiny4, attiny5, attiny9, attiny10, attiny20
 353         and attiny40.
 354         (md_show_usage): Add avrtiny arch in usage message.
 355         (avr_operand): validate and issue error for invalid register for
 356         avrtiny.
 357         add new reloc exp for 16 bit lds/sts instruction.
 358         (md_apply_fix): check 16 bit lds/sts operand for out of range and
 359         encode.
 360         (md_assemble): check ISA for arch and issue diagnostic.
 361         * NEWS: Mention new support.
 362         * doc/c-avr.texi: Document support for avrtiny architecture.
 363
 364 2014-06-27  Alan Modra  <amodra@gmail.com>
 365
 366         * config/obj-macho.c (obj_mach_o_set_symbol_qualifier): Don't set
 367         SYM_MACHO_FIELDS_NOT_VALIDATED after reporting an error.
 368         (obj_mach_o_frob_label): Avoid cascading errors.
 369         (obj_mach_o_frob_symbol): Don't set SYM_MACHO_FIELDS_NOT_VALIDATED.
 370
 371 2014-06-18  DJ Delorie  <dj@redhat.com>
 372
 373         * config/rx-parse.y (BSET, BCLR, BTST, BNOT, BMCMD): Make .B
 374         suffix optional.
 375
 376 2014-06-17  Hans-Peter Nilsson  <hp@bitrange.com>
 377
 378         * config/tc-mmix.c (loc_assert_s): New member frag.
 379         (s_loc): Set it.
 380         (mmix_md_end): If an error is reported for a LOC expression, patch
 381         up the related frag.
 382
 383 2014-06-17  Chris Metcalf  <cmetcalf@tilera.com>
 384
 385         PR gas/16908
 386         * macro.c (buffer_and_nest): Honour #line directives inside
 387         macros.
 388
 389 2014-06-17 Jiong Wang <jiong.wang@arm.com>
 390
 391         * config/tc-arm.c (depr_it_insns): New check for inc/dec sp.
 392
 393 2014-06-17  Hans-Peter Nilsson  <hp@axis.com>
 394
 395         * config/tc-cris.c (cris_bad): New function.
 396         (cris_process_instruction): Where applicable, use it instead of
 397         as_bad.
 398
 399 2014-06-16  Nick Clifton  <nickc@redhat.com>
 400
 401         * config/tc-aarch64.c (md_apply_fix): Ignore unused relocs.
 402
 403 2014-06-16  Jiong Wang  <jiong.wang@arm.com>
 404
 405         * config/tc-aarch64.c (END_OF_INSN): New macro.
 406         (parse_operands): Handle operand given and in wrong format when
 407         operand is optional.
 408
 409 2014-06-16  Alan Modra  <amodra@gmail.com>
 410
 411         * write.h (subsegs_finish): Delete declaration.
 412         * write.c (subsegs_finish): Make static.
 413         (write_object_file): Call subsegs_finish from here.  Don't print
 414         warning and error count here..
 415         * as.c (main): ..do so here instead.  Remove dead code for "no
 416         object file generated".  Split out count strings to better support
 417         internationalisation.  Don't call subsegs_finish. Tidy setting of
 418         "keep_it".  Run write_object_file even after errors.
 419         (keep_it): Make static.
 420         * config/obj-elf.c (elf_frob_symbol): Remove assert.
 421         (elf_frob_file_before_adjust): Likewise.
 422
 423 2014-06-16  Alan Modra  <amodra@gmail.com>
 424
 425         * config/tc-dlx.c (machine_ip): Move initialisation of the_insn
 426         earlier.
 427
 428 2014-06-16  Alan Modra  <amodra@gmail.com>
 429
 430         * config/tc-i386.c (reloc): Don't avoid pcrel check for
 431         BFD_RELOC_SIZE64.  Return NO_RELOC on failing pcrel check.
 432
 433 2014-06-16  Alan Modra  <amodra@gmail.com>
 434
 435         * config/tc-tic6x.c (s_tic6x_ehtype): Clear after frag_more.
 436         (tic6x_output_exidx_entry): Likewise.
 437         (md_apply_fix): Simplify 1 byte md_number_to_chars.
 438
 439 2014-06-16  Alan Modra  <amodra@gmail.com>
 440
 441         * config/tc-tic54x.c (tic54x_mlib): Don't write garbage past
 442         end of archive to temp file.
 443         (tic54x_start_line_hook): Start scan for parallel on next line,
 444         not one char into next line (which may overrun the buffer).
 445
 446 2014-06-16  Alan Modra  <amodra@gmail.com>
 447
 448         * config/tc-vax.c (md_apply_fix): Rewrite.
 449         (tc_gen_reloc, vax_cons, vax_cons_fix_new): Style: Use NO_RELOC
 450         define rather than the equivalent BFD_RELOC_NONE.
 451
 452 2014-06-16  Alan Modra  <amodra@gmail.com>
 453
 454         * config/tc-arm.c (s_arm_elf_cons): Initialise after frag_more.
 455         (md_apply_fix): Delete now unnecessary zeroing for BFD_RELOC_ARM_GOT*
 456         and BFD_RELOC_ARM_TLS* relocs.  Simplify BFD_RELOC_8 case.
 457
 458 2014-06-16  Alan Modra  <amodra@gmail.com>
 459
 460         * config/tc-cris.c (md_create_long_jump): Follow "short" jump
 461         with a nop rather than leaving uninitialised.
 462
 463 2014-06-13  Chen Gang  <gang.chen.5i5j@gmail.com>
 464
 465         * config/tc-score7.c: Replace sprintf with strcpy where
 466         appropriate.
 467         (s7_b32_relax_to_b16): Use symbol_get_frag() to access a symbol's
 468         frag.
 469         * config/tc-score.c (s3_relax_branch_inst16): Likewise.
 470         (s3_relax_cmpbranch_inst32): Likewise.
 471
 472 2014-06-07  Alan Modra  <amodra@gmail.com>
 473
 474         * config/tc-ppc.c (ppc_insert_operand): Handle PPC_OPERAND_SIGNOPT
 475         on unsigned fields.  Comment on PPC_OPERAND_SIGNOPT signed fields
 476         in 64-bit mode.
 477
 478 2014-06-02  Martin Storsjo  <martin@martin.st>
 479
 480         * doc/c-aarch64.texi: Fix the documentation on :pg_hi21:.
 481
 482 2014-06-05  Joel Brobecker  <brobecker@adacore.com>
 483
 484         * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
 485         bfd's development.sh.
 486         * Makefile.in, configure: Regenerate.
 487
 488 2014-06-03  Nick Clifton  <nickc@redhat.com>
 489
 490         * config/tc-msp430.c (OPTION_WARN_INTR_NOPS): Use y instead of z.
 491         (OPTION_NO_WARN_INTR_NOPS): Use Y instead of Z.
 492         * doc/c-msp430.texi: Update command line option description.
 493
 494 2014-05-22  Alan Modra  <amodra@gmail.com>
 495
 496         * listing.c (listing_warning, listing_error): Add space after colon.
 497         * messages.c (as_warn_internal, as_bad_internal): Use the same
 498         string as above.
 499
 500 2014-05-20  Matthew Fortune  <matthew.fortune@imgtec.com>
 501
 502         * config/tc-mips.c (file_mips_opts_checked): New static global.
 503         (s_module): New static function.
 504         (file_ase): Remove.
 505         (mips_pseudo_table): Add .module handler.
 506         (mips_set_ase): Add opts argument and use instead of mips_opts.
 507         (md_assemble): Use file_mips_check_options.
 508         (md_parse_option): Update to use file_mips_opts instead of mips_opts.
 509         (mips_set_architecture): Delete function.  Moved to...
 510         (mips_after_parse_args): Here.  All logic now applies to
 511         file_mips_opts first and then copies the final state to mips_opts.
 512         Move error checking and defaults inference to mips_check_options and
 513         file_mips_check_options.
 514         (mips_check_options): New static function.  Common option checking for
 515         command line, .module and .set.  Use .module values in error messages
 516         instead of refering to command line options.
 517         (file_mips_check_options): New static function.  A wrapper for
 518         mips_check_options with file_mips_opts.  Updates BFD arch based on
 519         final options.
 520         (s_mipsset): Split into s_mipsset and parse_code_option.  Settings
 521         supported by both .set and .module are moved to parse_code_option.
 522         Warnings and errors are kept in s_mipsset because when
 523         parse_code_option is used with s_module the warnings are deferred
 524         until code is generated.  Any setting supporting 'default' value is
 525         kept in s_mipsset as it is not applicable to s_module. Inferred
 526         settings are also kept in s_mipsset as s_module does not infer any
 527         settings.  Use mips_check_options.
 528         (parse_code_option): New static function derived from s_mipsset.
 529         (s_module): New static function that implements .module.  Allows file
 530         level settings to be changed until code is generated.
 531         (s_cpload, s_cpsetup, s_cplocal): Use file_mips_check_options.
 532         (s_cprestore, s_cpreturn, s_cpadd, mips_address_bytes): Likewise.
 533         (mips_elf_final_processing): Update file_ase to file_mips_opts.ase.
 534         (md_mips_end): Use file_mips_check_options.
 535         * doc/c-mips.texi: Document .module.
 536
 537 2014-05-20  Matthew Fortune  <matthew.fortune@imgtec.com>
 538
 539         * messages.c (as_warn_internal): Remove extra whitespace from
 540         warning messages.
 541
 542 2014-05-20  Matthew Fortune  <matthew.fortune@imgtec.com>
 543
 544         * config/tc-mips.c (FP64_ASES): Add ASE_MSA.
 545         (mips_after_parse_args): Do not select ASE_MSA without -mfp64.
 546
 547 2014-05-20  Mike Stump  <mikestump@comcast.net>
 548
 549         * messages.c (as_warn_internal): Ensure we don't interleave output
 550         within a single line when make -j is used.
 551         (as_bad_internal): Likewise.
 552
 553 2014-05-20  Richard Sandiford  <rdsandiford@googlemail.com>
 554
 555         * config/obj-elf.h (obj_elf_seen_attribute): Declare.
 556         * config/obj-elf.c (recorded_attribute_info): New structure.
 557         (recorded_attributes): New variable.
 558         (record_attribute, obj_elf_seen_attribute): New functions.
 559         (obj_elf_vendor_attribute): Record which attributes have been seen.
 560
 561 2014-05-20  Nick Clifton  <nickc@redhat.com>
 562
 563         * config/tc-msp430.c (CHECK_RELOC_MSP430): Add OP parameter.
 564         Generate BFD_RELOC_MSP430_ABS_HI16 if vshift is 1.
 565         (msp430_srcoperand): Store vshift value in operand.
 566
 567 2014-05-19  Nick Clifton  <nickc@redhat.com>
 568
 569         PR gas/16858
 570         * config/tc-i386.c (md_apply_fix): Improve the detection of code
 571         symbols for 32-bit PE targets.
 572
 573 2014-05-18  Richard Sandiford  <rdsandiford@googlemail.com>
 574
 575         * config/tc-mips.c (md_obj_begin): Delete.
 576         (md_obj_end): Fold into...
 577         (md_mips_end): ...here.  Move to end of file.
 578
 579 2014-05-17  Nick Clifton  <nickc@redhat.com>
 580
 581         PR gas/16946
 582         * config/tc-v850.c (handle_ctoff): Generate an error if called
 583         when using the RH850 ABI.
 584
 585 2014-05-16  Kaushik Phata  <Kaushik.Phatak@kpit.com>
 586
 587         * config/tc-rl78.c (enum options): Add OPTION_32BIT_DOUBLES
 588         and OPTION_64BIT_DOUBLES.
 589         (md_longopts): Add -m32bit-doubles and -m64bit-doubles.
 590         (md_parse_option): Parse -m32bit-doubles and -m64bit-doubles.
 591         (md_show_usage): Show all of the RL78 options.
 592         (rl78_float_cons): New static functions.
 593         (md_pseudo_table): Update handler for "double".
 594         * doc/c-rl78.texi: Document new options.
 595         * doc/as.texinfo: Likewise.
 596
 597 2014-05-13  Matthew Fortune  <matthew.fortune@imgtec.com>
 598
 599         * config/tc-mips.c (mips_set_options): Rename gp32 to gp throughout.
 600         (HAVE_32BIT_GPRS, HAVE_64BIT_GPRS): Remove. Re-implement via GPR_SIZE.
 601         (HAVE_32BIT_FPRS, HAVE_64BIT_FPRS): Remove. Re-implement via FPR_SIZE.
 602         (GPR_SIZE, FPR_SIZE): New macros. Use throughout.
 603
 604 2014-05-08  Matthew Fortune  <matthew.fortune@imgtec.com>
 605
 606         * config/tc-mips.c (md_parse_option): Update missed file_mips_isa
 607         references.
 608
 609 2014-05-08  Matthew Fortune  <matthew.fortune@imgtec.com>
 610
 611         * config/tc-mips.c (mips_set_options): Rename fp32 field to fp.
 612         Update fp32 == 0 to fp == 64 and fp32 == 1 to fp != 64 throughout.
 613         (file_mips_gp32, file_mips_fp32, file_mips_soft_float,
 614         file_mips_single_float, file_mips_isa, file_mips_arch): Merge into
 615         one struct...
 616         (file_mips_opts): Here. New static global. Update throughout.
 617         (mips_opts): Update defaults for gp32 and fp.
 618
 619 2014-05-08  Matthew Fortune  <matthew.fortune@imgtec.com>
 620
 621         * config/tc-mips.c (streq): Define.
 622         (mips_convert_symbolic_attribute): New function.
 623         * config/tc-mips.h (CONVERT_SYMBOLIC_ATTRIBUTE): Define.
 624         (mips_convert_symbolic_attribute): New prototype.
 625
 626 2014-05-02  Max Filippov  <jcmvbkbc@gmail.com>
 627
 628         * config/tc-xtensa.c (md_apply_fix): mark BFD_RELOC_XTENSA_DIFF*
 629         fixups as signed.
 630
 631 2014-05-07  Andrew Bennett  <andrew.bennett@imgtec.com>
 632
 633         * tc-mips.c (ISA_SUPPORTS_MIPS16E): Add mips32r3, mips32r5, mips64r3
 634         and mips64r5.
 635         (ISA_HAS_64BIT_FPRS): Likewise.
 636         (ISA_HAS_ROR): Likewise.
 637         (ISA_HAS_ODD_SINGLE_FPR): Likewise.
 638         (ISA_HAS_MXHC1): Likewise.
 639         (hilo_interlocks): Likewise.
 640         (md_longopts): Likewise.
 641         (ISA_HAS_64BIT_REGS): Add mips64r3 and mips64r5.
 642         (ISA_HAS_DROR): Likewise.
 643         (options): Add OPTION_MIPS32R3, OPTION_MIPS32R5, OPTION_MIPS64R3, and
 644         OPTION_MIPS64R5.
 645         (mips_isa_rev): Add support for mips32r3, mips32r5, mips64r3 and
 646         mips64r5.
 647         (md_parse_option): Likewise.
 648         (s_mipsset): Likewise.
 649         (mips_cpu_info_table): Add entries for mips32r3, mips32r5, mips64r3
 650         and mips64r5.  Also change p5600 entry to be mips32r5.
 651         * configure.in: Add support for mips32r3, mips32r5, mips64r3 and
 652         mips64r5.
 653         * configure: Regenerate.
 654         * doc/c-mips.texi: Document the -mips32r3, -mips32r5, -mips64r3 and
 655         -mips64r5 command line options.
 656         * doc/as.texinfo: Likewise.
 657
 658 2014-04-28  Nick Clifton  <nickc@redhat.com>
 659
 660         PR gas/16858
 661         * config/tc-i386.c (md_apply_fix): Do not adjust value of
 662         pc-relative fixes against weak symbols.
 663
 664 2014-04-26  Alan Modra  <amodra@gmail.com>
 665
 666         * po/POTFILES.in: Regenerate.
 667
 668 2014-04-24  Nick Clifton  <nickc@redhat.com>
 669
 670         * config/tc-arm.c (s_ltorg): Only create a mapping symbol for ELF
 671         based targets.
 672
 673 2014-04-23  Will Newton  <will.newton@linaro.org>
 674
 675         * config/tc-arm.c (s_ltorg): Call make_mapping_symbol
 676         directly instead of mapping_state.
 677
 678 2014-04-23  Andrew Bennett  <andrew.bennett@imgtec.com>
 679
 680         * config/tc-mips.c (options): Add OPTION_XPA and OPTION_NO_XPA.
 681         (md_longopts): Add xpa and no-xpa command line options.
 682         (mips_ases): Add MIPS XPA ASE.
 683         (mips_cpu_info_table): Update p5600 entry to allow the XPA ASE.
 684         * doc/as.texinfo: Document the MIPS XPA command line options.
 685         * doc/c-mips.texi: Document the MIPS XPA command line options,
 686         and assembler directives.
 687
 688 2014-04-22  Sandra Loosemore  <sandra@codesourcery.com>
 689
 690         * config/tc-nios2.c (nios2_consume_arg): Add case for 'E' to
 691         unbreak self-test mode.
 692
 693 2014-04-22  Max Filippov  <jcmvbkbc@gmail.com>
 694
 695         * config/tc-xtensa.c (xtensa_handle_align): record alignment for the
 696         first section frag.
 697
 698 2014-04-22  Christian Svensson  <blue@cmd.nu>
 699
 700         * Makefile.am: Remove openrisc and or32 support.  Add support for or1k.
 701         * configure.in: Likewise.
 702         * configure.tgt: Likewise.
 703         * doc/as.texinfo: Likewise.
 704         * config/obj-coff.h: Likewise.
 705         * config/tc-or1k.c: New file.
 706         * config/tc-or1k.h: New file.
 707         * config/tc-openrisc.c: Delete.
 708         * config/tc-openrisc.h: Delete.
 709         * config/tc-or32.c: Delete.
 710         * config/tc-or32.h: Delete.
 711         * Makefile.in: Regenerate.
 712         * configure: Regenerate.
 713
 714 2014-04-16  Alan Modra  <amodra@gmail.com>
 715
 716         * config/tc-tilegx.h (TC_CONS_FIX_NEW): Add RELOC arg.
 717         * config/tc-tilepro.h (TC_CONS_FIX_NEW): Likewise.
 718
 719 2014-04-10  Senthil Kumar Selvaraj  <senthil_kumar.selvaraj@atmel.com>
 720
 721         * config/tc-avr.c: Add new flag mlink-relax.
 722         (md_show_usage): Add flag and help text.
 723         (md_parse_option): Record whether link relax is turned on.
 724         (relaxable_section): New.
 725         (avr_validate_fix_sub): New.
 726         (avr_force_relocation): New.
 727         (md_apply_fix): Generate DIFF reloc.
 728         (avr_allow_local_subtract): New.
 729
 730         * config/tc-avr.h (TC_LINKRELAX_FIXUP): Define to 0.
 731         (TC_FORCE_RELOCATION): Define.
 732         (TC_FORCE_RELOCATION_SUB_SAME): Define.
 733         (TC_VALIDATE_FIX_SUB): Define.
 734         (avr_force_relocation): Declare.
 735         (avr_validate_fix_sub): Declare.
 736         (md_allow_local_subtract): Define.
 737         (avr_allow_local_subtract): Declare.
 738
 739 2014-04-10  Andrew Bennett  <andrew.bennett@imgtec.com>
 740
 741         * config/tc-mips.c (mips_cpu_info_table): Add P5600
 742         configuation.
 743         * doc/c-mips.texi: Document p5600.
 744
 745 2014-04-09  Nick Clifton  <nickc@redhat.com>
 746
 747         * config/tc-rl78.h (TC_CONS_FIX_NEW): Add RELOC parameter.
 748         * config/tc-z80.h (TC_CONS_FIX_NEW): Discard RELOC parameter.
 749         * config/tc-aarch64.h (TC_CONS_FIX_NEW): Discard RELOC parameter.
 750         * read.c (emit_expr_fix): Mark the r parameter as potentially
 751         unused.
 752
 753 2014-04-09  Alan Modra  <amodra@gmail.com>
 754
 755         * config/tc-ppc.c (warn_476, last_insn, last_seg, last_subseg):
 756         New static vars.
 757         (md_longopts, md_parse_option, md_show_usage): Add --ppc476-workaround.
 758         (ppc_elf_cons_fix_check): New function.
 759         (md_assemble): Set last_insn, last_seg, last_subseg.
 760         (ppc_byte, md_apply_fix): Handle warn_476.
 761         * config/tc-ppc.h (TC_CONS_FIX_CHECK): Define.
 762         (ppc_elf_cons_fix_check): Declare.
 763         * read.c (cons_worker): Invoke TC_CONS_FIX_CHECK.
 764
 765 2014-04-09  Alan Modra  <amodra@gmail.com>
 766
 767         * gas/config/tc-alpha.h (TC_CONS_FIX_NEW): Add RELOC parameter.
 768         * gas/config/tc-arc.c (arc_cons_fix_new): Add reloc parameter.
 769         * gas/config/tc-arc.h (arc_cons_fix_new): Update prototype.
 770         (TC_CONS_FIX_NEW): Add RELOC parameter.
 771         * gas/config/tc-arm.c (cons_fix_new_arm): Similarly
 772         * gas/config/tc-arm.h (cons_fix_new_arm, TC_CONS_FIX_NEW): Similarly.
 773         * gas/config/tc-cr16.c (cr16_cons_fix_new): Similarly.
 774         * gas/config/tc-cr16.h (cr16_cons_fix_new, TC_CONS_FIX_NEW): Similarly.
 775         * gas/config/tc-crx.h (TC_CONS_FIX_NEW): Similarly.
 776         * gas/config/tc-m32c.c (m32c_cons_fix_new): Similarly.
 777         * gas/config/tc-m32c.h (m32c_cons_fix_new, TC_CONS_FIX_NEW): Similarly.
 778         * gas/config/tc-mn10300.c (mn10300_cons_fix_new): Similarly.
 779         * gas/config/tc-mn10300.h (mn10300_cons_fix_new, TC_CONS_FIX_NEW):
 780         Similarly.
 781         * gas/config/tc-ns32k.c (cons_fix_new_ns32k): Similarly.
 782         * gas/config/tc-ns32k.h (cons_fix_new_ns32k): Similarly.
 783         * gas/config/tc-pj.c (pj_cons_fix_new_pj): Similarly.
 784         * gas/config/tc-pj.h (pj_cons_fix_new_pj, TC_CONS_FIX_NEW): Similarly.
 785         * gas/config/tc-rx.c (rx_cons_fix_new): Similarly.
 786         * gas/config/tc-rx.h (rx_cons_fix_new, TC_CONS_FIX_NEW): Similarly.
 787         * gas/config/tc-sh.c (sh_cons_fix_new): Similarly.
 788         * gas/config/tc-sh.h (sh_cons_fix_new, TC_CONS_FIX_NEW): Similarly.
 789         * gas/config/tc-tic54x.c (tic54x_cons_fix_new): Similarly.
 790         * gas/config/tc-tic54x.h (tic54x_cons_fix_new, TC_CONS_FIX_NEW):
 791         Similarly.
 792         * gas/config/tc-tic6x.c (tic6x_cons_fix_new): Similarly.
 793         * gas/config/tc-tic6x.h (tic6x_cons_fix_new, TC_CONS_FIX_NEW):
 794         Similarly.
 795         * gas/config/tc-arc.c (arc_parse_cons_expression): Return reloc.
 796         * gas/config/tc-arc.h (arc_parse_cons_expression): Update proto.
 797         * gas/config/tc-avr.c (exp_mod_data): Make global.
 798         (pexp_mod_data): Delete.
 799         (avr_parse_cons_expression): Return exp_mod_data pointer.
 800         (avr_cons_fix_new): Add exp_mod_data_t pointer param.
 801         (exp_mod_data_t): Move typedef..
 802         * gas/config/tc-avr.h: ..to here.
 803         (exp_mod_data): Declare.
 804         (TC_PARSE_CONS_RETURN_TYPE, TC_PARSE_CONS_RETURN_NONE): Define.
 805         (avr_parse_cons_expression, avr_cons_fix_new): Update prototype.
 806         (TC_CONS_FIX_NEW): Update.
 807         * gas/config/tc-hppa.c (hppa_field_selector): Delete static var.
 808         (cons_fix_new_hppa): Add hppa_field_selector param.
 809         (fix_new_hppa): Adjust.
 810         (parse_cons_expression_hppa): Return field selector.
 811         * gas/config/tc-hppa.h (parse_cons_expression_hppa): Update proto.
 812         (cons_fix_new_hppa): Likewise.
 813         (TC_PARSE_CONS_RETURN_TYPE, TC_PARSE_CONS_RETURN_NONE): Define.
 814         * gas/config/tc-i386.c (got_reloc): Delete static var.
 815         (x86_cons_fix_new): Add reloc param.
 816         (x86_cons): Return got reloc.
 817         * gas/config/tc-i386.h (x86_cons, x86_cons_fix_new): Update proto.
 818         (TC_CONS_FIX_NEW): Add RELOC param.
 819         * gas/config/tc-ia64.c (ia64_cons_fix_new): Add reloc param.  Adjust
 820         calls.
 821         * gas/config/tc-ia64.h (ia64_cons_fix_new): Update prototype.
 822         (TC_CONS_FIX_NEW): Add reloc param.
 823         * gas/config/tc-microblaze.c (parse_cons_expression_microblaze):
 824         Return reloc.
 825         (cons_fix_new_microblaze): Add reloc param.
 826         * gas/config/tc-microblaze.h: Formatting.
 827         (parse_cons_expression_microblaze): Update proto.
 828         (cons_fix_new_microblaze): Likewise.
 829         * gas/config/tc-nios2.c (nios2_tls_ldo_reloc): Delete static var.
 830         (nios2_cons): Return ldo reloc.
 831         (nios2_cons_fix_new): Delete.
 832         * gas/config/tc-nios2.h (nios2_cons): Update prototype.
 833         (nios2_cons_fix_new, TC_CONS_FIX_NEW): Delete.
 834         * gas/config/tc-ppc.c (md_pseudo_table): Remove quad, long, word,
 835         short.  Make llong use cons.
 836         (ppc_elf_suffix): Return BFD_RELOC_NONE rather than BFD_RELOC_UNUSED.
 837         (ppc_elf_cons): Delete.
 838         (ppc_elf_parse_cons): New function.
 839         (ppc_elf_validate_fix): Don't check for BFD_RELOC_UNUSED.
 840         (md_assemble): Use BFD_RELOC_NONE rather than BFD_RELOC_UNUSED.
 841         * gas/config/tc-ppc.h (TC_PARSE_CONS_EXPRESSION): Define
 842         (ppc_elf_parse_cons): Declare.
 843         * gas/config/tc-sparc.c (sparc_cons_special_reloc): Delete static var.
 844         (sparc_cons): Return reloc specifier.
 845         (cons_fix_new_sparc): Add reloc specifier param.
 846         (sparc_cfi_emit_pcrel_expr): Use emit_expr_with_reloc.
 847         * gas/config/tc-sparc.h (TC_PARSE_CONS_RETURN_TYPE): Define.
 848         (TC_PARSE_CONS_RETURN_NONE): Define.
 849         (sparc_cons, cons_fix_new_sparc): Update prototype.
 850         * gas/config/tc-v850.c (hold_cons_reloc): Delete static var.
 851         (v850_reloc_prefix): Use BFD_RELOC_NONE rather than BFD_RELOC_UNUSED.
 852         (md_assemble): Likewise.
 853         (parse_cons_expression_v850): Return reloc.
 854         (cons_fix_new_v850): Add reloc parameter.
 855         * gas/config/tc-v850.h (parse_cons_expression_v850): Update proto.
 856         (cons_fix_new_v850): Likewise.
 857         * gas/config/tc-vax.c (vax_cons_special_reloc): Delete static var.
 858         (vax_cons): Return reloc.
 859         (vax_cons_fix_new): Add reloc parameter.
 860         * gas/config/tc-vax.h (vax_cons, vax_cons_fix_new): Update proto.
 861         * gas/config/tc-xstormy16.c (xstormy16_cons_fix_new): Add reloc param.
 862         * gas/config/tc-xstormy16.h (xstormy16_cons_fix_new): Update proto.
 863         * gas/dwarf2dbg.c (TC_PARSE_CONS_RETURN_NONE): Provide default.
 864         (emit_fixed_inc_line_addr): Adjust exmit_expr_fix calls.
 865         * gas/read.c (TC_PARSE_CONS_EXPRESSION): Return value.
 866         (do_parse_cons_expression): Adjust.
 867         (cons_worker): Pass return value from TC_PARSE_CONS_EXPRESSION
 868         to emit_expr_with_reloc.
 869         (emit_expr_with_reloc): New function handling reloc, mostly
 870         extracted from..
 871         (emit_expr): ..here.
 872         (emit_expr_fix): Add reloc param.  Adjust TC_CONS_FIX_NEW invocation.
 873         Handle reloc.
 874         (parse_mri_cons): Convert to ISO.
 875         * gas/read.h (TC_PARSE_CONS_RETURN_TYPE): Define.
 876         (TC_PARSE_CONS_RETURN_NONE): Define.
 877         (emit_expr_with_reloc): Declare.
 878         (emit_expr_fix): Update prototype.
 879         * gas/write.c (write_object_file): Update TC_CONS_FIX_NEW invocation.
 880
 881 2014-04-03  Ilya Tocar  <ilya.tocar@intel.com>
 882
 883         * config/tc-i386.c (cpu_arch): Add .se1.
 884         * doc/c-i386.texi: Document .se1/se1.
 885
 886 2014-04-02  DJ Delorie  <dj@redhat.com>
 887
 888         * config/tc-rl78.c (md_apply_fix): Add overflow warnings for
 889         pc-relative branches.
 890
 891 2014-04-02  Nick Clifton  <nickc@redhat.com>
 892
 893         PR gas/16765
 894         * config/tc-arm.c (create_unwind_entry): Report an error if an
 895         attempt to recreate an unwind directive is encountered.
 896
 897 2014-03-27  Nick Clifton  <nickc@redhat.com>
 898
 899         * config/tc-score.c (s3_parse_pce_inst): Add "%s" parameter to
 900         sprintf in order to avoid a compile time warning.
 901
 902 2014-03-26  Nick Clifton  <nickc@redhat.com>
 903
 904         * config/tc-rl78.c (rl78_op): Issue an error message if a 16-bit
 905         relocation is used on an 8-bit operand or vice versa.
 906         (tc_gen_reloc): Use the RL78_16U relocation for RL78_CODE.
 907         (md_apply_fix): Add support for RL78_HI8, RL78_HI16 and RL78_LO16.
 908
 909 2014-03-25  Nick Clifton  <nickc@redhat.com>
 910
 911         * config/obj-coff-seh.c (obj_coff_seh_code): New function -
 912         switches the current segment back to the code segment recorded
 913         when seh_proc was last invoked.
 914         * config/obj-coff-seh.h (SEH_CMDS): Add seh_code.
 915
 916 2014-03-25  Alan Modra  <amodra@gmail.com>
 917
 918         * config/tc-ppc.c (ppc_is_toc_sym): Revert 2014-03-05.
 919         (md_assemble): Likewise.  Warn.
 920
 921 2014-03-21  David Weatherford <weath@cadence.com>
 922             Max Filippov <jcmvbkbc@gmail.com>
 923
 924         * config/tc-xtensa.c (xtensa_check_frag_count)
 925         xtensa_create_trampoline_frag,
 926         xtensa_maybe_create_trampoline_frag, init_trampoline_frag,
 927         find_trampoline_seg, search_trampolines, get_best_trampoline,
 928         check_and_update_trampolines, add_jump_to_trampoline,
 929         dump_trampolines): New functions.
 930         (md_parse_option): Add cases for --[no-]trampolines options.
 931         (md_assemble, finish_vinsn, xtensa_end): Add call to
 932         xtensa_check_frag_count.
 933         (xg_assemble_vliw_tokens): Add call to
 934         xtensa_maybe_create_trampoline_frag.
 935         (xtensa_relax_frag): Relax fragments with RELAX_TRAMPOLINE state.
 936         (relax_frag_immed): Relax jump instructions that cannot reach its
 937         target.
 938         * config/tc-xtensa.h (xtensa_relax_statesE::RELAX_TRAMPOLINE): New
 939         relax state.
 940         * doc/as.texinfo: Document --[no-]trampolines command-line options.
 941         * doc/c-xtensa.texi: Document trampolines relaxation and command
 942         line options.
 943         * frags.c (get_frag_count, clear_frag_count): New function.
 944         (frag_alloc): Increment totalfrags counter.
 945         * frags.h (get_frag_count, clear_frag_count): New function.
 946
 947 2014-03-20  DJ Delorie  <dj@redhat.com>
 948
 949         * config/rl78-defs.h (RL78_RELAX_NONE, RL78_RELAX_BRANCH): Add.
 950         * config/rl78-parse.y (BC, BNC, BZ, BNZ, BH, BHZ, bt_bf): Call
 951         rl78_relax().
 952         * config/tc-rl78.h (md_relax_frag): Define.
 953         (rl78_relax_frag): Declare.
 954         * config/tc-rl78.c (rl78_relax): Add.
 955         (md_assemble): Set up the variable frags also when relaxing.
 956         (op_type_T): New.
 957         (rl78_opcode_type): New.
 958         (rl78_frag_fix_value): New.
 959         (md_estimate_size_before_relax): New-ish.
 960         (rl78_relax_frag): New.
 961         (md_convert_frag): New-ish.
 962
 963 2014-03-20  Richard Sandiford  <rdsandiford@googlemail.com>
 964
 965         * config/tc-mips.h (DIFF_EXPR_OK, CFI_DIFF_EXPR_OK): Define.
 966         * config/tc-mips.c (md_pcrel_from): Remove error message.
 967         (md_apply_fix): Convert PC-relative BFD_RELOC_32s to
 968         BFD_RELOC_32_PCREL.  Report a specific error message for unhandled
 969         PC-relative expressions.  Handle BFD_RELOC_8.
 970
 971 2014-03-19  Jose E. Marchesi  <jose.marchesi@oracle.com>
 972
 973         * config/tc-sparc.c (hpriv_reg_table): Added entries for
 974         %hstick_offset and %hstick_enable.
 975         * doc/c-sparc.texi (Sparc-Regs): Document the %hstick_offset and
 976         %hstick_enable hyperprivileged registers.
 977
 978 2014-03-19  Daniel Gutson <daniel.gutson@tallertechnologies.com>
 979             Nick Clifton  <nickc@redhat.com>
 980
 981         * config/tc-arm.c (codecomposer_syntax): New flag that states whether the
 982         CCS syntax compatibility mode is on or off.
 983         (asmfunc_states): New enum to represent the asmfunc directive state.
 984         (asmfunc_state): New variable holding the asmfunc directive state.
 985         (comment_chars): Rename to arm_comment_chars.
 986         (line_separator_chars): Rename to arm_line_separator_chars.
 987         (s_ccs_ref): New function that handles the .ref directive.
 988         (asmfunc_debug): New function.
 989         (s_ccs_asmfunc): New function that handles the .asmfunc directive.
 990         (s_ccs_endasmfunc): New function that handles the .endasmfunc directive.
 991         (s_ccs_def): New function that handles the .def directive.
 992         (tc_start_label_without_colon): New function.
 993         (md_pseudo_table): Added new CCS directives.
 994         (arm_ccs_mode): New function that handles the -mccs command line option.
 995         (arm_long_opts): Added new -mccs command line option.
 996         * config/tc-arm.h (LABELS_WITHOUT_COLONS): New macro.
 997         (TC_START_LABEL_WITHOUT_COLON): New macro.
 998         (tc_start_label_without_colon): Added extern function declaration.
 999         (tc_comment_chars): Define.
1000         (tc_line_separator_chars): Define.
1001         * app.c (do_scrub_begin): Use tc_line_separator_chars, if defined.
1002         * read.c (read_begin): Likewise.
1003         * doc/as.texinfo: Add documentation for the -mccs command line
1004         option.
1005         * doc/c-arm.texi: Likewise.
1006         * doc/internals.texi: Document tc_line_separator_chars.
1007         * NEWS: Mention the new feature.
1008
1009 2014-03-18  Jiong Wang  <jiong.wang@arm.com>
1010
1011         * config/tc-aarch64.c (aarch64_opts): Add new option
1012         "mno-verbose-error".
1013         (verbose_error_p): Initialize to 1.
1014         * doc/c-aarch64.texi (AArch64 Options): Document -mverbose-error
1015         and -mno-verbose-error.
1016
1017 2014-03-17  Nick Clifton  <nickc@redhat.com>
1018
1019         PR gas/16694
1020         * config/tc-arm.c (tc_arm_regname_to_dw2regnum): Parse VFP
1021         registers as well.
1022
1023 2014-03-13  Richard Earnshaw  <rearnsha@arm.com>
1024             Jiong Wang  <Jiong.Wang@arm.com>
1025
1026         * doc/c-aarch64.texi: Clean up some formatting issues.
1027         (AArch64 Options): Document -mcpu and -march.
1028         (AArch64 Extensions): New node.
1029
1030 2014-03-13  Tristan Gingold  <gingold@adacore.com>
1031
1032         * config/tc-i386.c (use_big_obj): Declare.
1033         (OPTION_MBIG_OBJ): Define.
1034         (md_longopts): Add -mbig-obj option.
1035         (md_parse_option): Handle it.
1036         (md_show_usage): Display help for this option.
1037         (i386_target_format): Use bigobj for x86-64 if -mbig-obj.
1038         * doc/c-i386.texi: Document the option.
1039
1040 2014-03-12  Nick Clifton  <nickc@redhat.com>
1041
1042         PR gas/16688
1043         * config/tc-aarch64.c (literal_expression): New structure.
1044         (literal_pool): Replace exp array with literal_expression array.
1045         (add_to_lit_pool): When adding a bignum cache the big value.
1046         (s_ltorg): When emitting a bignum initialise the global bignum
1047         array from the cached value.
1048
1049 2014-03-12  Alan Modra  <amodra@gmail.com>
1050
1051         * Makefile.in: Regenerate.
1052         * config.in: Regenerate.
1053         * doc/Makefile.in: Regenerate.
1054
1055 2014-03-06  Pitchumani Sivanupandi  <pitchumani.s@atmel.com>
1056         Vishnu KS <Vishnu.k_s@atmel.com>
1057         Senthil Kumar Selvaraj  <senthil_kumar.selvaraj@atmel.com>
1058         Soundararajan <Soundararajan.dhakshinamoorthy@atmel.com>
1059
1060         * gas/tc-avr.c: Add new devices
1061         avr25: ata5272, attiny828
1062         avr35: ata5505, attiny1634
1063         avr4: atmega8a, ata6285, ata6286, atmega48pa
1064         avr5: at90pwm161, ata5790, ata5795, atmega164pa, atmega165pa,
1065         atmega168pa, atmega32a, atmega64rfr2, atmega644rfr2, atmega64a,
1066         atmega16hva2
1067         avr51: atmega128a, atmega1284
1068         avrxmega2: atxmega16a4u, atxmega16c4, atxmega32a4u, atxmega32c4,
1069         atxmega32e5, atxmega16e5, atxmega8e5
1070         avrxmega4: atxmega64a3u, atxmega64a4u, atxmega64b1, atxmega64b3,
1071         atxmega64c3, atxmega64d4
1072         avrxmega6: atxmega128a3u, atxmega128b3, atxmega128c3,
1073         atxmega128d4, atxmega192a3u, atxmega192c3, atxmega256a3u,
1074         atxmega256c3, atxmega384c3, atxmega384d3
1075         avrxmega7: atxmega128a4u
1076         * doc/c-avr.texi: Ditto.
1077
1078 2014-03-05  Alan Modra  <amodra@gmail.com>
1079
1080         Update copyright years.
1081
1082 2014-03-05  Alan Modra  <amodra@gmail.com>
1083
1084         * config/tc-ppc.c (ppc_elf_suffix): Support @localentry.
1085         (md_apply_fix): Support R_PPC64_ADDR64_LOCAL.
1086
1087 2014-03-05  Alan Modra  <amodra@gmail.com>
1088
1089         * config/tc-ppc.c (md_assemble): Move code adjusting reloc types
1090         later.  Merge absolute and relative branch reloc selection.
1091         Generate 16-bit relocs for most 16-bit insn fields given a
1092         non-constant expression.
1093
1094 2014-03-05  Alan Modra  <amodra@gmail.com>
1095
1096         * config/tc-ppc.c (ppc_is_toc_sym): Remove OBJ_ELF support.
1097         (md_assemble): Don't call ppc_is_toc_sym for ELF.
1098
1099 2014-03-04  Heiher  <r@hev.cc>
1100
1101         * config/tc-mips.c (mips_cpu_info_table): Use ISA_MIPS64R2 for
1102         Loongson-3A.
1103
1104 2014-03-03  Nick Clifton  <nickc@redhat.com>
1105
1106         * config/msp430/msp430.c: Replace known mcu array with known
1107         msp430 ISA mcu name array.
1108         Accept any name for -mmcu option.
1109         Add -mz option to warn about missing NOP following an interrupt
1110         status change.
1111         (check_for_nop): New.
1112         (msp430_operands): Emit a warning, if requested, when an interrupt
1113         changing instruction is not followed by a NOP.
1114         * doc/c-msp430.c: Document -mz option.
1115
1116 2014-03-03  Alan Modra  <amodra@gmail.com>
1117
1118         * config/bfin-lex-wrapper.c: Correct copyright date.
1119         * config/obj-fdpicelf.c: Likewise.
1120         * config/obj-fdpicelf.h: Likewise.
1121         * config/tc-frv.c: Correct copyright punctuation.
1122         * config/tc-ip2k.c: Likewise.
1123         * config/tc-iq2000.c: Likewise.
1124         * config/tc-mep.c: Likewise.
1125         * config/tc-tic4x.c: Likewise.
1126         * config/tc-tic4x.h: Likewise.
1127
1128 2014-03-01  Senthil Kumar Selvaraj <senthil_kumar.selvaraj@atmel.com>
1129
1130         * config/tc-avr.c: Remove atxmega16x1.
1131
1132 2014-02-28  Alan Modra  <amodra@gmail.com>
1133
1134         * dwarf2dbg.c (out_debug_line): Correct .debug_line header_length
1135         field for 64-bit dwarf.
1136
1137 2014-02-21  Ilya Tocar  <ilya.tocar@intel.com>
1138
1139         * config/tc-i386.c (cpu_arch): Add .prefetchwt1.
1140         * doc/c-i386.texi: Document .prefetchwt1/prefetchwt1.
1141
1142 2014-02-12  Ilya Tocar  <ilya.tocar@intel.com>
1143
1144         * config/tc-i386.c (cpu_arch): Add .clflushopt, .xsavec, .xsaves.
1145         * doc/c-i386.texi: Document .xsavec/xsavec/.xsaves/xsaves/
1146         clflushopt/.clfushopt.
1147
1148 2014-02-10  Alan Modra  <amodra@gmail.com>
1149
1150         * po/POTFILES.in: Regenerate.
1151         * po/gas.pot: Regenerate.
1152
1153 2014-02-03  Sandra Loosemore  <sandra@codesourcery.com>
1154
1155         * config/tc-nios2.c (md_apply_fix): Test for new relocs.
1156         (nios2_special_reloc): Add %call_lo, %call_hiadj, %got_lo,
1157         %got_hiadj relocation operators.  Sort table and add comment
1158         to explain ordering.
1159         (nios2_fix_adjustable): Test for new relocs.
1160         * doc/c-nios2.texi (Nios II Relocations): Document new relocation
1161         operators.
1162
1163 2014-01-30  Sandra Loosemore  <sandra@codesourcery.com>
1164
1165         * config/tc-nios2.c (md_apply_fix): Handle BFD_RELOC_NIOS2_CALL26_NOAT.
1166         (nios2_assemble_args_m): Likewise.
1167         (md_assemble): Likewise.
1168
1169 2014-01-24  DJ Delorie  <dj@redhat.com>
1170
1171         * config/tc-msp430.c (msp430_section): Always flag data sections,
1172         regardless of -md.
1173         (msp430_frob_section): New.  Make sure all sections are noticed if
1174         they have content.
1175         (msp430_lcomm): New.  Flag bss if .lcomm is seen.
1176         (msp430_comm): New.  Likewise.
1177         (md_pseudo_table): Add them.
1178         * config/tc-msp430.h (msp430_frob_section): Declare.
1179         (tc_frob_section): Define.
1180
1181 2014-01-23  Nick Clifton  <nickc@redhat.com>
1182
1183         * config/tc-msp430.c (show_mcu_list): Delete.
1184         (md_parse_option): Accept any MCU name.  Accept several more
1185         variants for the -mcpu option.
1186         (md_show_usage): Do not call show_mcu_list.
1187
1188 2014-01-22  DJ Delorie  <dj@redhat.com>
1189
1190         * config/tc-msp430.c (msp430_refsym): New: ".refsym <symbol>"
1191         * doc/c-msp430.texi (MSP430 Directives): Document it.
1192
1193 2014-01-22  Michael Zolotukhin  <michael.v.zolotukhin@gmail.com>
1194
1195         * config/tc-i386.c (check_VecOperands): Remove regzmm from AVX2
1196         gather assert.
1197
1198 2014-01-22  Michael Zolotukhin  <michael.v.zolotukhin@gmail.com>
1199
1200         PR gas/16489
1201         * config/tc-i386.c (check_VecOperands): Add check for invalid
1202         register set in AVX512 gathers.
1203
1204 2014-01-22  Alan Modra  <amodra@gmail.com>
1205
1206         * config/tc-tic4x.c (md_shortopts): s/CONST/const/.
1207
1208 2014-01-21  DJ Delorie  <dj@redhat.com>
1209
1210         * config/tc-rl78.c (require_end_of_expr): New.
1211         (md_operand): Call it.
1212         (rl78_cons_fix_new): Mark LO16, HI16, ahd HI8 internal relocations
1213         as not overflowing.
1214
1215 2014-01-17  Will Newton  <will.newton@linaro.org>
1216
1217         * config/tc-arm.c (do_vfp_nsyn_cvt_fpv8): Set OP to 1
1218         for the s32.f64 flavours of VCVT.
1219
1220 2014-01-14  Nick Clifton  <nickc@redhat.com>
1221
1222         PR gas/16434
1223         * config/tc-z80.c (wrong_match): Provide format string to
1224         as_warn.
1225         (parse_exp_not_indexed): Delete unused variable dummy.
1226         (emit_byte): Delete unused variable fixp.
1227
1228 2014-01-08  H.J. Lu  <hongjiu.lu@intel.com>
1229
1230         * config/tc-i386.c (regbnd): Removed.
1231         (vec_disp8): Likewise.
1232
1233 2014-01-08  H.J. Lu  <hongjiu.lu@intel.com>
1234
1235         * as.c (parse_args): Update copyright year to 2014.
1236
1237 2014-01-07  Tom Tromey  <tromey@redhat.com>
1238
1239         * config/tc-tic30.c (debug): Avoid old VA_* compatibility
1240         wrappers.
1241
1242 2014-01-07  Tom Tromey  <tromey@redhat.com>
1243
1244         * config/tc-microblaze.h (parse_cons_expression_microblaze): Don't
1245         use PARAMS.
1246
1247 2014-01-07  Tom Tromey  <tromey@redhat.com>
1248
1249         * config/tc-xc16x.h: Don't use ANSI_PROTOTYPES.
1250
1251 2013-01-07  Philipp Tomsich  <philipp.tomsich@theobroma-systems.com>
1252
1253         * config/tc-aarch64.c (aarch64_cpus): Add entry for "xgene-1"
1254
1255 For older changes see ChangeLog-2013
1256 \f
1257 Copyright (C) 2014 Free Software Foundation, Inc.
1258
1259 Copying and distribution of this file, with or without modification,
1260 are permitted in any medium without royalty provided the copyright
1261 notice and this notice are preserved.
1262
1263 Local Variables:
1264 mode: change-log
1265 left-margin: 8
1266 fill-column: 74
1267 version-control: never
1268 End: