1 2008-10-12 H.J. Lu <hongjiu.lu@intel.com>
3 * config/tc-i386.c (processor_type): Moved to tc-i386.h.
4 (cpu_arch_tune): Make it global.
5 (cpu_arch_isa): Likewise.
6 (cpu_arch_isa_flags): Likewise.
7 (i386_align_code): Check fragP->tc_frag_data.isa,
8 fragP->tc_frag_data.isa_flags and cpu_arch_tune instead of
9 cpu_arch_isa, cpu_arch_isa_flags and cpu_arch_tune,
12 * config/tc-i386.h (processor_type): Moved from tc-i386.c.
14 (cpu_arch_isa): Likewise.
15 (cpu_arch_isa_flags): Likewise.
16 (i386_tc_frag_data): Likewise.
17 (TC_FRAG_TYPE): Likewise.
18 (TC_FRAG_INIT): Likewise.
20 2008-10-09 Bob Wilson <bob.wilson@acm.org>
22 * doc/as.texinfo (Pseudo Ops): Swap order of Comm and CFI menu entries.
23 (Altmacro, Comm, Loc, Loc_mark_labels, List, MRI, PopSection, Sleb128):
24 Moved into alphabetical order.
26 2008-10-09 Bob Wilson <bob.wilson@acm.org>
28 * doc/as.texinfo (Dot): Expand no-space-dir conditional to include
30 (Pseudo Ops): Put conditionals around Skip and Space menu entries.
31 (Line): Remove conditional declaration of Ln node and section here.
32 Put aout-bout description inside the no-line-dir conditional.
33 (Skip, Space): Use a separate conditional for each node.
35 2008-10-09 Bob Wilson <bob.wilson@acm.org>
37 * doc/as.texinfo (Pseudo Ops): Remove no-file-dir conditional around
38 menu entry for File; remove version-specific .file operands from menu
39 description. Replace "LNS directives" menu entry with new entries
40 for "Loc" and "Loc_mark_labels".
41 (LNS directives): Split into separate nodes for each directive.
42 (Loc): New node for .loc directive. Mention that this directive
43 is for DWARF2 and add a missing article.
44 (Loc_mark_labels): Likewise for .loc_mark_labels.
45 (File): Change this node to describe both the default version and
46 the DWARF2 version of .file. Move the no-file-dir conditional to
47 include only the default version.
49 2008-10-09 Eric Botcazou <ebotcazou@adacore.com>
51 * dw2gencfi.c (cfi_finish): Deal with md_fix_up_eh_frame.
52 * config/tc-i386.h (md_fix_up_eh_frame): Define on Solaris.
53 (i386_solaris_fix_up_eh_frame): Declare.
54 * config/tc-i386.c (i386_solaris_fix_up_eh_frame): New function.
56 2008-10-09 Nick Clifton <nickc@redhat.com>
59 * doc/as.texinfo (Dollar Local Labels): Correct description of
60 dollar local labels to show that the colon suffix is still
63 2008-10-08 Nick Clifton <nickc@redhat.com>
65 * configure.in (ALL_LINGUAS): Add "id".
66 * configure: Regenerate.
67 * po/id.po: New Indonesian translation.
69 2008-10-07 H.J. Lu <hongjiu.lu@intel.com>
71 * read.c (pseudo_set): Don't allow global register symbol only
72 if TC_GLOBAL_REGISTER_SYMBOL_OK is undefined.
73 * symbols.c (S_SET_EXTERNAL): Likewise.
75 * config/tc-mmix.h (TC_GLOBAL_REGISTER_SYMBOL_OK): Defined.
77 * doc/internals.texi: Document TC_GLOBAL_REGISTER_SYMBOL_OK.
79 2008-10-06 Bob Wilson <bob.wilson@acm.org>
81 * doc/as.texinfo (Local): New description of ELF .local directive.
83 2008-10-06 Nick Clifton <nickc@redhat.com>
86 * read.c (get_line_sb): Renamed to get_non_macro_line_sb.
87 (_find_end_of_line): Add extra parameter indicating if the line is
88 inside a macro. If it is then do not allow the @ character to be
89 treated as a line separator character.
90 (read_a_source): Update use of _find_end_of_line.
91 (find_end_of_line): Likewise.
92 (s_irp): Update use of get_line_sb.
94 (do_repeat): Likewise.
95 (get_line_sb): New function. Like the old version of get_line_sb
96 except that it takes an extra parameter indicating whether the
97 line is inside a macro.
98 (get_macro_line_sb): New function.
100 2008-10-04 Hans-Peter Nilsson <hp@axis.com>
102 * config/tc-cris.c: Update all comments regarding explicit relocations
103 to, besides PIC, also imply TLS or to say "relocation specifier" or
105 (RELOC_SUFFIX_CHAR): Rename from PIC_SUFFIX_CHAR. Change all callers.
106 (cris_get_reloc_suffix): Rename from cris_get_pic_suffix. Change all
107 callers. Also handle TLS relocs.
108 (cris_get_specified_reloc_size): Rename from cris_get_pic_reloc_size.
109 Change all callers. Also handle TLS relocs.
111 (cris_process_instruction): Check for non-PIC TLS relocations and
112 adjust message when emitting error message about relocation not
114 (get_autoinc_prefix_or_indir_op): Also check for relocation suffix
116 (get_3op_or_dip_prefix_op): Ditto.
117 (cris_number_to_imm, tc_gen_reloc): Handle TLS relocs like PIC relocs.
119 2008-10-03 Kazu Hirata <kazu@codesourcery.com>
121 * listing.c (buffer_line): Open the source file with FOPEN_RB.
122 Manually process line ends.
124 2008-09-30 Wesley W. Terpstra <wesley@terpstra.ca>
125 Nick Clifton <nickc@redhat.com>
127 * config/tc-tic4x.c (tic4x_globl): Call S_SET_EXTERNAL as well as
130 2008-09-30 Wesley W. Terpstra <wesley@terpstra.ca>
131 Nick Clifton <nickc@redhat.com>
133 * coffgen.c (coff_write_symbols): Check to see if a symbol's flags
134 do not match it class and if necessary update the class.
135 (null_error_handler): New function. Suppresses the generation of
137 * coff64-rs6000.c (bfd_xcoff_backend_data): Update comment.
139 2008-09-30 Alan Modra <amodra@bigpond.net.au>
141 * Makefile.am: Run "make dep-am".
142 * Makefile.in: Regenerate.
144 2008-09-29 Nick Clifton <nickc@redhat.com>
146 * dw2gencfi.c (output_cfi_insn): Fix typo in invocation of
147 tc_cfi_emit_pcrel_expr macro.
149 2008-09-29 Peter O'Gorman <pogma@thewrittenword.com>
150 Steve Ellcey <sje@cup.hp.com>
152 * configure: Regenerate for new libtool.
154 * Makefile.in: Ditto.
155 * doc/Makefile.in: Ditto.
157 2008-09-29 Nick Clifton <nickc@redhat.com>
160 * app.c (do_scrub_chars): Only issue warnings about tick
161 characters detected in symbol strings if hex ticks are supported.
163 2008-09-29 Nick Clifton <nickc@redhat.com>
165 * dw2gencfi.c (output_cfi_insn): Fix typo in invocation of
166 tc_cfi_emit_pcrel_expr macro.
168 2008-09-28 Daniel Jacobowitz <dan@codesourcery.com>
170 * NEWS: Mention .cfi_val_encoded_addr.
172 2008-09-26 Eric Botcazou <ebotcazou@adacore.com>
174 * Makefile.am (TARG_ENV_HFILES): Add config/te-solaris.h.
175 * Makefile.in (TARG_ENV_HFILES): Likewise.
176 * configure.tgt (Solaris targets): Set em=solaris.
177 * config/te-solaris.h: New file.
179 2008-09-26 Jie Zhang <jie.zhang@analog.com>
181 * config/bfin-parse.y (asm_1): Fix reduce/reduce conflicts.
183 2008-09-24 Richard Henderson <rth@redhat.com>
185 * dw2gencfi.c (DWARF2_ADDR_SIZE): Provide default.
186 (struct cfi_insn_data): Add ea member.
187 (CFI_val_encoded_addr, dot_cfi_val_encoded_addr): New.
188 (output_cfi_insn): Handle CFI_val_encoded_addr.
189 (select_cie_for_fde): Don't match CFI_val_encoded_addr.
190 * doc/as.texinfo (.cfi_val_encoded_addr): Document.
192 2008-09-25 Alan Modra <amodra@bigpond.net.au>
195 * listing.c (print_options): Don't call fprintf without format string.
197 2008-09-19 Alan Modra <amodra@bigpond.net.au>
199 * write.c (TC_FORCE_RELOCATION_SUB_LOCAL): Heed md_register_arithmetic.
200 (TC_VALIDATE_FIX_SUB): Likewise.
201 * config/tc-frv.h (TC_FORCE_RELOCATION_SUB_LOCAL): Likewise.
202 * config/tc-hppa.h (TC_FORCE_RELOCATION_SUB_LOCAL): Likewise.
203 * config/tc-mn10300.h (TC_VALIDATE_FIX_SUB): Likewise.
204 * config/tc-sh.h (TC_VALIDATE_FIX_SUB): Likewise.
205 (TC_FORCE_RELOCATION_SUB_LOCAL): Likewise.
206 * config/tc-sh64.h (TC_VALIDATE_FIX_SUB): Likewise.
207 * config/tc-xtensa.h (TC_VALIDATE_FIX_SUB): Likewise.
208 * doc/internals.texi (TC_FORCE_RELOCATION_SUB_ABS,
209 TC_FORCE_RELOCATION_SUB_LOCAL, TC_VALIDATE_FIX_SUB): Show new param.
211 * write.c (md_register_arithmetic): Define.
212 (fixup_segment): Adjust TC_FORCE_RELOCATION_SUB_ABS invocation.
213 Modify error message when registers involved.
214 (TC_FORCE_RELOCATION_SUB_ABS): Heed md_register_arithmetic.
215 * config/tc-sh.h (TC_FORCE_RELOCATION_SUB_ABS): Likewise.
217 2008-09-15 Alan Modra <amodra@bigpond.net.au>
219 * write.c (install_reloc): Correct EMIT_SECTION_SYMBOLS test.
221 2008-09-15 Alan Modra <amodra@bigpond.net.au>
223 * config/tc-frv.c (md_apply_fix): Use abs_section_sym for
224 relocs with no symbol.
225 * config/tc-mmix.c (md_assemble): Mark fake symbol on
226 BFD_RELOC_MMIX_BASE_PLUS_OFFSET as OK for use by relocs.
227 (mmix_md_end): Likewise mark mmix reg contents section symbol.
229 2008-09-14 Chris Smith <chris@zxdesign.info>
231 * config/tc-z80.c: Opcode generation of ld a,(bc) and ld a,(de) was
232 broken, as the opcode of ld a,(de) was being emitted for both.
234 2008-09-12 Sterling Augustine <sterling@tensilica.com>
236 * config/tc-xtensa.c (init_op_placement_info_table): Allow number of
237 operands equal to MAX_INSN_ARGS.
239 2008-09-11 Jan Kratochvil <jan.kratochvil@redhat.com>
241 * configure.in: Call AC_SYS_LARGEFILE.
242 * config.in: Regenerate.
243 * configure: Regenerate.
245 2008-09-09 Peter Bergner <bergner@vnet.ibm.com>
247 * config/tc-ppc.c (ppc_setup_opcodes): Simplify POWER4/NOPOWER4 test.
248 Remove POWER5 and POWER6 tests.
250 2008-09-08 John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
252 * config/tc-hppa.c (hppa_regname_to_dw2regnum): Add register name to
253 number support for 32-bit targets.
255 2008-09-08 Tristan Gingold <gingold@adacore.com>
257 * NEWS: Add a marker for the 2.19 features.
259 2008-09-07 John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
261 * config/tc-hppa.h (DIFF_EXPR_OK): Define for SOM target. Revise
262 comment regarding use of difference expressions.
263 (TC_FORCE_RELOCATION_SUB_LOCAL): Define to 1.
265 * dw2gencfi.c (CFI_DIFF_EXPR_OK): Define if not defined.
266 (dot_cfi_personality): Use CFI_DIFF_EXPR_OK instead of DIFF_EXPR_OK.
267 (dot_cfi_lsda, output_cie, output_fde): Likewise.
268 * config/tc-hppa.h (CFI_DIFF_EXPR_OK): Define.
270 2008-09-06 Richard Sandiford <rdsandiford@googlemail.com>
272 * config/tc-mips.h (DWARF2_FDE_RELOC_SIZE): Define.
274 2008-09-03 Nick Clifton <nickc@redhat.com>
276 * config/tc-i386.c (pe_lcomm_internal): New function. Allows the
277 alignment field of the .lcomm directive to be optional.
278 (pe_lcomm): New function. Pass pe_lcomm_internal to
280 (md_pseudo_table): Implement .lcomm directive for COFF based
282 * doc/c-i386.texi (i386-Directives): New node. Used to document
283 the .lcomm directive.
285 2008-08-30 John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
287 * config/tc-hppa.h: Don't define DWARF2_EH_FRAME_READ_ONLY on Linux
290 2008-08-29 Eric B. Weddington <eric.weddington@atmel.com>
292 * config/tc-avr.c (mcu_types): Add atmega16u4.
293 * doc/c-avr.texi: Likewise.
295 2008-08-28 H.J. Lu <hongjiu.lu@intel.com>
297 * config/tc-ia64.c (CR_IIB0): New.
299 (cr): Add cr.iib0 and cr.iib1.
300 (specify_resource): Handle IA64_RS_CR_IIB and CR_IIB0/CR_IIB1.
302 2008-08-28 Jan Beulich <jbeulich@novell.com>
304 * config/tc-i386.c (md_assemble): Force number of displacement
305 operands to zero when processing string instruction.
306 (i386_index_check): Special-case string instruction operands. Don't
307 fudge address prefix if there already was a memory operand. Fix
308 error message to correctly reflect the addressing mode used.
309 (i386_att_operand): Fix comment.
310 (i386_intel_operand): Snapshot, clear, and restore base and index
311 reg for each operand processed. Increment count of memory operands
314 2008-08-27 John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
316 * config/tc-hppa.c (is_SB_relative): New macro.
317 (fix_new_hppa): Remove $segrel$ marker.
318 (cons_fix_new_hppa): Set reloc type R_PARISC_SEGREL32 if expression is
320 * config/tc-hppa.h (tc_frob_symbol): Check for $segrel$.
322 2008-08-27 Jan Beulich <jbeulich@novell.com>
324 * config/tc-i386.c (check_string): Use register_prefix for error
326 (process_operands): Likewise.
328 2008-08-26 Mark Mitchell <mark@codesourcery.com>
330 * c-arm.texi: Add tutorial on ARM unwinding pseudo ops.
332 2008-08-26 Jie Zhang <jie.zhang@analog.com>
334 * config/bfin-parse.y (check_macfunc_option): Fix instruction
336 (asm_1): Check mode for 16-bit multiply instructions.
338 2008-08-24 Alan Modra <amodra@bigpond.net.au>
340 * configure.in: Update a number of obsolete autoconf macros.
341 * configure: Regenerate.
342 * aclocal.m4: Regenerate.
344 2008-08-22 Nick Clifton <nickc@redhat.com>
346 * config/tc-mcore.c (md_assemble): Increase length of name array
347 to include terminating NUL.
349 2008-08-22 Jie Zhang <jie.zhang@analog.com>
351 * config/bfin-lex.l (NUMBER): Protect special `.'.
353 2008-08-22 Alan Modra <amodra@bigpond.net.au>
355 * symbols.c (symbol_clone): Ensure clones are not external.
357 2008-08-22 Alan Modra <amodra@bigpond.net.au>
359 * config/tc-hppa.c (md_begin): Set BSF_KEEP for "dummy_symbol".
361 2008-08-21 Richard Henderson <rth@redhat.com>
363 * dw2gencfi.c (DWARF2_FDE_RELOC_SIZE): New.
364 (output_cie, output_fde): Use it.
365 (DWARF2_EH_FRAME_READ_ONLY): New.
366 (cfi_finish): Use it.
368 * config/tc-hppa.h (DWARF2_FDE_RELOC_SIZE): Set to 8 for 64-bit.
369 (DWARF2_CIE_DATA_ALIGNMENT): Change sign.
370 (DWARF2_EH_FRAME_READ_ONLY): New.
371 * config/tc-hppa.c (tc_gen_reloc): Generate pc-relative relocations
372 from the results of DIFF_EXPR_OK manipulation.
374 2008-08-21 Sterling Augustine <sterling@tensilica.com>
376 * config/xtensa-istack.h (MAX_INSN_ARGS): Increase to 64.
378 2008-08-20 Bob Wilson <bob.wilson@acm.org>
380 * config/tc-xtensa.c (O_tlsfunc, O_tlsarg, O_tlscall): Define.
381 (O_tpoff, O_dtpoff): Define.
382 (suffix_relocs): Add entries for TLS suffixes.
383 (xtensa_elf_cons): Check for invalid use of TLS relocations.
384 (map_operator_to_reloc): Add is_literal parameter and use it to
385 control translating TLS instruction relocations to the corresponding
387 (xg_valid_literal_expression): Allow TLS operators.
388 (xg_build_to_insn): Copy TLS operators from pseudo-instruction
389 operands to generated literals.
390 (xg_assemble_literal): Handle TLS operators. Update call to
391 map_operator_to_reloc.
392 (md_assemble): Handle CALLXn.TLS pseudo-instruction.
393 (md_apply_fix): Handle TLS relocations.
394 (emit_single_op): Handle TLS operators.
395 (convert_frag_immed): Update call to map_operator_to_reloc.
396 (vinsn_to_insnbuf): Emit relocations for TLS-related instructions.
397 * config/xtensa-istack.h (tinsn_struct): Add tls_reloc field.
398 * config/xtensa-relax.c (append_literal_op): Add src_op parameter
399 to initialize the op_data field of the BuildOp.
400 (build_transition): Use it here to record the source operand
401 corresponding to a generated literal.
402 * config/xtensa-relax.h (build_op): Comment op_data use for literals.
404 2008-08-20 H.J. Lu <hongjiu.lu@intel.com>
406 AVX Programming Reference (August, 2008)
407 * config/tc-i386.c (CPU_FLAGS_AES_MATCH): New.
408 (CPU_FLAGS_AVX_MATCH): Likewise.
409 (CPU_FLAGS_32BIT_MATCH): Updated.
410 (cpu_flags_match): Likewise.
412 2008-08-20 Alan Modra <amodra@bigpond.net.au>
415 * write.c (install_reloc): Check that reloc symbols have been
417 (set_symtab): Mark symbols with BSF_KEEP.
419 2008-08-18 H.J. Lu <hongjiu.lu@intel.com>
421 * config/tc-i386.c (i386_align_code): Fix a comment typo.
423 2008-08-15 Alan Modra <amodra@bigpond.net.au>
426 * configure.in: Invoke AC_USE_SYSTEM_EXTENSIONS.
427 * Makefile.in: Regenerate.
428 * aclocal.m4: Regenerate.
429 * config.in: Regenerate.
430 * configure: Regenerate.
431 * doc/Makefile.in: Regenerate.
433 2008-08-14 Alan Modra <amodra@bigpond.net.au>
435 * config/tc-tic4x.c (tic4x_operands_parse): Make static.
437 2008-08-13 Ben Elliston <bje@au.ibm.com>
439 * doc/as.texinfo (Align): Document the PowerPC behaviour.
441 2008-08-13 Alan Modra <amodra@bigpond.net.au>
443 * as.c, as.h, ecoff.c, hash.c, macro.c, symbols.c, config/obj-evax.c,
444 config/obj-som.c, config/tc-alpha.c, config/tc-arm.c, config/tc-bfin.c,
445 config/tc-bfin.h, config/tc-crx.c, config/tc-frv.c, config/tc-frv.h,
446 config/tc-hppa.h, config/tc-i386.c, config/tc-i860.c, config/tc-i960.h,
447 config/tc-ia64.c, config/tc-ia64.h, config/tc-m32c.c, config/tc-m32c.h,
448 config/tc-m68k.c, config/tc-maxq.c, config/tc-s390.c, config/tc-s390.h,
449 config/tc-sparc.c, config/tc-sparc.h, config/tc-spu.c, config/tc-spu.h,
450 config/tc-tic4x.c, config/tc-tic4x.h, config/tc-tic54x.c,
451 config/tc-tic54x.h, config/tc-vax.c, doc/internals.texi: Banish PARAMS
452 and PTR. Convert to ISO C. Delete unnecessary forward declarations.
454 2008-08-12 Alan Modra <amodra@bigpond.net.au>
456 * config/tc-arm.c (s_unreq): Adjust hash_delete call.
457 * config/tc-ia64.c (dot_rot): Likewise.
459 2008-08-11 Alan Modra <amodra@bigpond.net.au>
462 * hash.c: Expand PTR to void *.
463 (hash_delete): Add "freeme" parameter. Call obstack_free.
464 * hash.h: Expand PTR to void *.
465 (hash_delete): Update prototype.
466 * macro.c (macro_expand_body): hash_delete LOCALs from formal_hash.
467 * config/tc-tic54x.c (tic54x_remove_local_label): Update hash_delete
469 (subsym_substitute): Likewise.
470 * doc/internals.texi (hash_delete): Update.
472 2008-08-08 Anatoly Sokolov <aesok@post.ru>
474 * config/tc-avr.c (mcu_types): Add avr25, avr31, avr35, and avr51
475 architectures. Reorganize list to put mcu types in correct
476 architectures and to order list same as in GCC. Use new ISA
477 definitions in include/opcode/avr.h.
478 * doc/c-avr.texi: Add avr25, avr31, avr35, and avr51 architecture
479 descriptions. Reorganize descriptions to put mcu types in correct
480 architectures and to order lists same as in GCC.
482 2008-08-08 Richard Sandiford <rdsandiford@googlemail.com>
483 Daniel Jacobowitz <dan@codesourcery.com>
485 * config/tc-mips.c (OPTION_CALL_NONPIC): New macro.
486 (OPTION_NON_SHARED, OPTION_XGOT, OPTION_MABI, OPTION_32)
487 (OPTION_N32, OPTION_64, OPTION_MDEBUG, OPTION_NO_MDEBUG)
488 (OPTION_PDR, OPTION_NO_PDR, OPTION_MVXWORKS_PIC): Bump by 1.
489 (md_longopts): Add -call_nonpic.
490 (md_parse_option): Handle OPTION_CALL_NONPIC.
491 (md_show_usage): Add -call_nonpic.
493 2008-08-08 Sterling Augustine <sterling@tensilica.com>
495 * config/tc-xtensa.c (exclude_section_from_property_tables): New.
496 (xtensa_create_property_segments): Use it.
497 (xtensa_create_xproperty_segments): Likewise.
499 2008-08-08 Alan Modra <amodra@bigpond.net.au>
501 * doc/internals.texi (DWARF2_FORMAT): Update for 2008-08-04 change.
503 2008-08-06 Richard Sandiford <rdsandiford@googlemail.com>
505 * config/tc-mips.c (mips16_reloc_p, got16_reloc_p, hi16_reloc_p)
506 (lo16_reloc_p): New functions.
507 (reloc_needs_lo_p): Use hi16_reloc_p and got16_reloc_p to
508 generalize relocation checks.
509 (matching_lo_reloc): New function.
510 (fixup_has_matching_lo_p): Use it.
511 (mips16_mark_labels): Don't clobber a symbol's visibility.
512 (append_insn): Use hi16_reloc_p and lo16_reloc_p.
513 (mips16_ip): Handle BFD_RELOC_MIPS16_GOT16 and BFD_RELOC_MIPS16_CALL16.
514 (md_apply_fix): Likewise.
515 (mips16_percent_op): Add %got and %call16.
516 (mips_frob_file): Use got16_reloc_p to generalize relocation checks.
517 Use matching_lo_reloc.
518 (mips_force_relocation): Use hi16_reloc_p and lo16_reloc_p to
519 generalize relocation checks.
520 (mips_fix_adjustable): Use lo16_reloc_p to generalize relocation
523 2008-08-06 DJ Delorie <dj@redhat.com>
525 * NEWS: Mention these changes.
527 * config/tc-h8300.h (H_TICK_HEX): Define.
528 * config/tc-h8300.c (OPTION_H_TICK_HEX): New.
529 (md_longopts): Add "-h-tick-hex".
530 (md_parse_option): Support it.
531 * doc/c-h8300.texi (H8/300 Options): Document it.
532 * doc/as.texinfo (Overview): Likewise.
534 * config/tc-sh.h (H_TICK_HEX): Define.
535 * config/tc-sh.c (OPTION_H_TICK_HEX): New.
536 (md_longopts): Add "-h-tick-hex".
537 (md_parse_option): Support it.
538 * doc/c-sh.texi (SH Options): Document it.
539 * doc/c-sh64.texi (SH64 Options): Document it.
540 * doc/as.texinfo (Overview): Likewise.
542 2008-08-05 Alan Modra <amodra@bigpond.net.au>
545 * dwarf2dbg.c (dwarf2_directive_file): Disable gas generated
546 debug info if we see compiler generated debug info.
547 (dwarf2_directive_loc): Likewise. Remove redundant debug_type test.
549 2008-08-04 Alan Modra <amodra@bigpond.net.au>
551 * dwarf2dbg.c: Remove superfluous forward function declarations.
552 (DWARF2_FORMAT): Add section arg.
553 (out_header): New function, split out from..
554 (out_debug_line): ..here.
555 (out_debug_aranges): Use out_header.
556 (out_debug_abbrev): Add info_seg and line_seg args. Use
557 DW_FORM_data8 (for DW_AT_stmt_list) if line_seg is 64-bit.
558 (out_debug_info): Use out_header. Output 8 byte DW_AT_stmt_list
559 if line_seg is 64-bit.
560 (dwarf2_finish): Adjust out_debug_abbrev call.
561 * config/tc-mips.h (DWARF2_FORMAT, mips_dwarf2_format): Add sec arg.
562 * config/tc-mips.c (mips_dwarf2_format): Likewise.
564 2008-08-04 Alan Modra <amodra@bigpond.net.au>
566 * Makefile.am (POTFILES.in): Set LC_ALL=C.
567 * Makefile.in: Regenerate.
568 * po/POTFILES.in: Regenerate.
570 2008-08-01 Peter Bergner <bergner@vnet.ibm.com>
572 * config/tc-ppc.c (parse_cpu): Rename altivec_or_spe to retain_flags.
573 Handle -mvsx and -mpower7.
574 (md_show_usage): Document -mpower7 and -mvsx.
575 * doc/as.texinfo (Target PowerPC): Document -mvsx.
576 * doc/c-ppc.texi (PowerPC-Opts): Document -mvsx and -mpower7.
578 2008-07-31 Peter Bergner <bergner@vnet.ibm.com>
580 * config/tc-ppc.c (parse_cpu) <power6>: Accept Altivec instructions.
583 2008-07-30 Michael J. Eager <eager@eagercon.com>
585 * config/tc-ppc.c (parse_cpu): Separate handling of -m403/405.
586 (md_show_usage): Likewise.
588 2008-07-30 Alan Modra <amodra@bigpond.net.au>
590 * messages.c, symbols.c, write.c: Silence gcc warnings.
592 2008-07-28 Ineiev <ineiev@yahoo.co.uk>
594 * config/tc-i386.c (operand_type_check): Warning fix.
596 2008-07-26 Michael Eager <eager@eagercon.com>
598 * doc/as.texinfo: Add description of single-precision attribute.
600 2008-07-24 Jie Zhang <jie.zhang@analog.com>
602 * config/bfin-parse.y (asm_1): Error if plain symbol is used
603 as load/store offset.
605 2008-07-22 Chao-ying Fu <fu@mips.com>
607 * config/tc-mips.c (mips_ip): Reset s to argsStart.
609 2008-07-22 Jie Zhang <jie.zhang@analog.com>
611 * config/tc-bfin.c (bfin_gen_loop): Remove loop symbol.
613 2008-07-21 DJ Delorie <dj@redhat.com>
615 * config/tc-h8300.c (fix_operand_size): Use the default size
616 specified by the .lbranch/.sbranch pseudos.
618 2008-07-18 DJ Delorie <dj@redhat.com>
620 * config/tc-m32c.h (H_TICK_HEX): Define.
621 * config/tc-m32c.c (OPTION_H_TICK_HEX): Define.
622 (md_longopts): Add support for it.
623 (md_parse_option): Likewise.
624 * doc/as.texinfo (Overview): Add new m32c options.
625 * doc/c-m32c.texi (M32C-Modifiers): Likewise
627 * as.h: (enable_h_tick_hex): New.
628 * app.c (enable_h_tick_hex): New.
630 (do_scrub_begin): Mark 'H' and 'h' as special if enable_h_tick_hex.
631 (do_scrub_chars): If enable_h_tick_hex and 'h', check for H'00
632 style hex constants and convert the input stream to 0x00 style.
633 (do_scrub_chars): If a 'X style character constant is found after
634 a symbol character (like you're or X'00), warn the user.
636 2008-07-10 Richard Sandiford <rdsandiford@googlemail.com>
638 * config/tc-mips.c (mips16_mark_labels): Use ELF_ST_SET_MIPS16.
639 (mips_fix_adjustable): Likewise.
640 (mips_frob_file_after_relocs): Likewise.
642 2008-07-08 Nathan Sidwell <nathan@codesourcery.com>
644 * config/tc-m68k.c (m68k_set_cpu, m68k_set_arch): Don't complain
645 about overriding an earlier setting.
647 2008-07-07 Adam Nemet <anemet@caviumnetworks.com>
649 * config/tc-mips.c (NO_ISA_COP): New macro.
650 (COP_INSN): New macro.
651 (is_opcode_valid): Use them.
652 (macro) <ld_st>: Use them. Don't accept coprocessor load store
653 insns based on the ISA if CPU is NO_ISA_COP.
654 <copz>: Likewise for coprocessor operations.
656 2008-07-07 Paul Brook <paul@codesourcery.com>
658 * config/tc-arm.c (arm_fix_adjustable): Don't adjust MOVW/MOVT
661 2008-07-07 Ralf Corsépius <ralf.corsepius@rtems.org>
663 * configure.tgt: Add bfin-*-rtems*.
665 2008-07-04 Alan Modra <amodra@bigpond.net.au>
667 * config/tc-spu.c (md_apply_fix): Handle fully resolved
668 BFD_RELOC_32_PCREL, BFD_RELOC_SPU_HI16 and BFD_RELOC_SPU_LO16.
670 2008-06-25 Peter Bergner <bergner@vnet.ibm.com>
672 * config/tc-ppc.c (parse_cpu): Handle -m464.
673 (md_show_usage): Likewise.
675 2008-06-24 Eric B. Weddington <eric.weddington@atmel.com>
677 Add support for ATtiny13A.
678 * config/tc-avr.c (mcu_types): Add attiny13a.
679 * doc/c-avr.texi: Likewise.
681 2008-06-24 Bob Wilson <bob.wilson@acm.org>
682 Alan Modra <amodra@bigpond.net.au>
684 * write.c (relax_segment <rs_org>): Include current stretch
685 value when calculating whether .org is backwards.
687 2008-06-17 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
689 * configure: Regenerate.
691 2008-06-17 Nick Clifton <nickc@redhat.com>
693 * app.c (do_scrub_chars): Do not UNGET an EOF value.
695 2008-06-16 Hans-Peter Nilsson <hp@bitrange.com>
698 * config/tc-mmix.c (s_loc): Assume "negative" addresses belong to
699 text_section. Do the "stepping backwards" test for text_section
700 using unsigned operands.
702 2008-06-13 Peter Bergner <bergner@vnet.ibm.com>
704 * config/tc-ppc.c (ppc_cpu): Use ppc_cpu_t typedef.
705 (ppc_insert_operand): Likewise.
706 (ppc_machine): Likewise.
707 * config/tc-ppc.h: #include "opcode/ppc.h"
708 (struct _ppc_fix_extra <ppc_cpu>): Use ppc_cpu_t typedef.
709 (ppc_cpu): Update extern decl.
711 2008-06-12 Adam Nemet <anemet@caviumnetworks.com>
713 * config/tc-mips.c (validate_mips_insn): Handle field descriptors
714 +x, +X, +p, +P, +s, +S.
717 * config/tc-mips.c (validate_mips_insn): Handle field descriptor +Q.
719 (macro_build): Likewise.
720 (CPU_HAS_SEQ): New macro.
721 (macro2) <M_SEQ_I, M_SNE_I>: Use it. Emit seq/sne and seqi/snei.
723 2008-06-09 Eric B. Weddington <eric.weddington@atmel.com>
725 * config/tc-avr.c (mcu_types): Remove support for ATmega32HVB device.
726 * doc/c-avr.texi: Likewise.
728 2008-06-04 Nick Clifton <nickc@redhat.com>
730 * app.c (do_scrub_chars): Do not UNGET an EOF value.
732 2008-06-03 H.J. Lu <hongjiu.lu@intel.com>
734 * config/tc-i386.c (set_sse_check): New.
735 (md_pseudo_table): Add "sse_check".
737 2008-06-03 Paul Brook <paul@codesourcery.com>
739 * config/tc-arm.c (do_t_rbit): Populate both rm fields.
741 2008-05-30 Nick Clifton <nickc@redhat.com>
744 * config/tc-avr.c (avr_ldi_expression): Do not warn about unknown
747 2008-05-29 Maxim Kuvyrkov <maxim@codesourcery.com>
749 * config/tc-mips.c (mips_cpu_info_table): Move records for
750 ST Loongson-2E/2F processors to a better place.
752 2008-05-23 H.J. Lu <hongjiu.lu@intel.com>
755 * config/tc-i386.c (match_template): Report ambiguous operand
756 size, not invalid suffix when there is no match in Intel
759 2008-05-22 Paul Brook <paul@codesourcery.com>
761 * config/tc-arm.c (parse_cond): Covert to lowercase before matching.
763 2008-05-21 I-Jui Sung <ijsung@gmail.com>
765 * config/tc-arm.c (arm_cpus): Add Faraday ARMv4 and ARMv5TE
766 compatible cores: fa526, fa626, fa626te, fa726te.
767 * doc/c-arm.texi (ARM Opts): Add -mcpu={fa526, fa626, fa626te,
770 2008-05-14 Alan Modra <amodra@bigpond.net.au>
772 * Makefile.am: Run "make dep-am".
773 * Makefile.in: Regenerate.
774 * doc/Makefile.in: Regenerate.
775 * po/POTFILES.in: Regenerate.
777 2008-05-09 Catherine Moore <clm@codesourcery.com>
779 * config/tc-mips.c (mips_frob_file): Don't match MIPS16 relocs
780 with non-MIPS16 relocs.
782 2008-05-09 Chao-ying Fu <fu@mips.com>
784 * config/tc-mips.c (md_begin): Use strncmp to compare TARGET_OS, in
785 case that some characters append at the end of the name.
787 (s_change_sec): Likewise.
788 (md_section_align): Likewise.
790 2008-05-07 Bob Wilson <bob.wilson@acm.org>
792 * config/tc-xtensa.c (xtensa_create_property_segments): Use
793 xtensa_make_property_section instead of xtensa_get_property_section.
794 (xtensa_create_xproperty_segments): Likewise.
796 2008-05-02 H.J. Lu <hongjiu.lu@intel.com>
798 * NEWS: Mention XSAVE, EPT and MOVBE.
800 * config/tc-i386.c (cpu_arch): Add .movbe and .ept.
801 (md_show_usage): Add .movbe and .ept.
803 * doc/c-i386.texi: Add movbe and ept to -march=. Document
806 2008-04-29 David S. Miller <davem@davemloft.net>
808 * config/tc-sparc.c (v9a_asr_table): Fix order of softint entries.
810 2008-04-28 Adam Nemet <anemet@caviumnetworks.com>
812 * config/tc-mips.c (file_mips_soft_float, file_mips_single_float):
814 (OPTION_ELF_BASE): Make room for new option macros.
815 (OPTION_SOFT_FLOAT, OPTION_HARD_FLOAT, OPTION_SINGLE_FLOAT,
816 OPTION_DOUBLE_FLOAT): New option macros.
817 (md_longopts): Add msoft-float, mhard-float, msingle-float and
819 (md_parse_option): Handle OPTION_SINGLE_FLOAT,
820 OPTION_DOUBLE_FLOAT, OPTION_SOFT_FLOAT and OPTION_HARD_FLOAT.
821 (md_show_usage): Add -msoft-float, -mhard-float, -msingle-float
823 (struct mips_set_options): New fields soft_float and single_float.
824 (mips_opts): Initialized them. Add comment for each field
826 (mips_after_parse_args): Set them based on file_mips_soft_float
827 and file_mips_single_float.
828 (s_mipsset): Add support for `.set softfloat', `.set hardfloat',
829 `.set singlefloat' and `.set doublefloat'.
830 (is_opcode_valid): New function to invoke OPCODE_IS_MEMBER.
831 Handle single-float and soft-float instructions here.
832 (macro_build, mips_ip): Use it instead of OPCODE_IS_MEMBER.
833 (is_opcode_valid_16): New function.
834 (mips16_ip): Use it instead of OPCODE_IS_MEMBER.
835 (macro) <M_LDC1_AB, M_SDC1_AB, M_L_DOB, M_L_DAB, M_S_DAB,
836 M_S_DOB>: Remove special-casing of r4650.
837 * doc/c-mips.texi (-march=): Add Octeon.
838 (MIPS Opts): Document -msoft-float and -mhard-float. Document
839 -msingle-float and -mdouble-float.
840 (MIPS floating-point): New section. Document `.set softfloat' and
841 `.set hardfloat'. Document `.set singlefloat' and `.set
844 2008-04-25 David S. Miller <davem@davemloft.net>
846 * config/tc-sparc.c: Accept 'softint_clear' and 'softint_set'
849 * doc/c-sparc.texi: Consistently refer to architecture 'versions',
850 rather than occaisionally 'levels'. Consistently refer to Sun's
851 UNIX variant as SunOS, every version of Solaris is also SunOS.
852 Document new 'softint_clear' and 'softint_set' aliases. Clarify
853 which architecture versions support '%dcr', '%cq', and '%gl'. Add
854 section on 32-bit/64-bit opcode translations.
856 2008-04-23 Mike Frysinger <vapier@gentoo.org>
858 * Makefile.am (OBJ_FORMAT_CFILES): Add config/obj-fdpicelf.c.
859 (OBJ_FORMAT_HFILES): Add config/obj-fdpicelf.h.
860 (obj-fdpicelf.o): Define.
861 * Makefile.in: Regenerate.
862 * configure.tgt: Set bfd_gas to yes when fmt is fdpicelf.
864 (bfin-*-linux-uclibc): New; set fmt to fdpicelf and em to linux.
865 (bfin-*-uclinux*): New; set fmt to elf and em to linux.
866 * config/obj-fdpicelf.c: New.
867 * config/obj-fdpicelf.h: Likewise.
868 * config/tc-bfin.c (bfin_flags, bfin_pic_flag): Set default based on
869 the OBJ_FDPIC_ELF define.
870 (OPTION_NOPIC): Define.
871 (md_longopts): Add mnopic and mno-fdpic.
872 (md_parse_option): Handle OPTION_NOPIC.
874 2008-04-23 Paolo Bonzini <bonzini@gnu.org>
876 * aclocal.m4: Regenerate.
877 * configure: Regenerate.
879 2008-04-23 David S. Miller <davem@davemloft.net>
881 * config/tc-sparc.c (v9a_asr_table): Add missing
882 'stick' and 'stick_cmpr', and document ordering rules
884 (tc_gen_reloc): Accept BFD_RELOC_SPARC_PC22 and
885 BFD_RELOC_SPARC_PC10.
886 * doc/c-sparc.texi: New section on Sparc constants.
887 Add documentation for %stick and %stick_cmpr.
889 2008-04-22 David S. Miller <davem@davemloft.net>
891 * config/obj-elf.c (obj_elf_section_type): Add prototype
892 before obj_elf_section_word and add 'warn' arg.
893 (obj_elf_section_word): Add type pointer arg, and if no #SECTION
894 is matched, try checking for #SECTION_TYPE.
895 (obj_elf_section): Adjust for new args.
896 (obj_elf_type_name): New function.
897 (obj_elf_type): Call it, and accept STT_foo number strings
898 in .type statements as output by SunPRO compiler.
900 2008-04-22 H.J. Lu <hongjiu.lu@intel.com>
902 * config/tc-i386.c (md_assemble): Don't check SSE instructions
905 2008-04-18 David S. Miller <davem@davemloft.net>
907 * doc/c-sparc.texi: Add syntax section.
909 2008-04-18 H.J. Lu <hongjiu.lu@intel.com>
911 * config/tc-i386.c (build_modrm_byte): Don't check FMA to swap
912 REG and NDS for instructions with immediate operand.
914 2008-04-18 H.J. Lu <hongjiu.lu@intel.com>
916 * config/tc-i386.c (build_modrm_byte): Swap REG and NDS for
919 2008-04-16 David S. Miller <davem@davemloft.net>
921 * config/tc-sparc.c (sparc_ip): Add support for gotdata mnemonics
922 and relocation generation.
923 (tc_gen_reloc): Likewise.
925 2008-04-15 Andrew Stubbs <andrew.stubbs@st.com>
927 * config/tc-sh.c (md_apply_fix): Make sure BFD_RELOC_SH_PCRELIMM8BY4
928 relocations are properly aligned, and not negative.
930 2008-04-15 Khem Raj <kraj@mvista.com>
932 * doc/tc-arm.texi: Fix fnstart and fnend directive names.
934 2008-04-14 Edmar Wienskoski <edmar@freescale.com>
936 * config/tc-ppc.c (parse_cpu): Handle "e500mc". Extend "e500" to
937 accept e500mc instructions.
938 (md_show_usage): Document -me500mc.
940 2008-04-11 Nick Clifton <nickc@redhat.com>
942 * listing.c (print_timestamp): Use localtime rather than
943 localtime_r since not all build environments provide the latter.
945 2008-04-10 H.J. Lu <hongjiu.lu@intel.com>
947 * NEWS: Mention -msse-check=[none|error|warning].
949 * config/tc-i386.c (sse_check): New.
950 (OPTION_MSSE_CHECK): Likewise.
951 (md_assemble): Check SSE instructions if needed.
952 (md_longopts): Add -msse-check.
953 (md_parse_option): Handle OPTION_MSSE_CHECK.
954 (md_show_usage): Show -msse-check=[none|error|warning].
956 * doc/c-i386.texi: Document -msse-check=[none|error|warning].
958 2008-04-10 Santiago Urueña <suruena@gmail.com>
960 * listing.c: Add -ag listing flag to show general information in
961 listings such as gas version, passed options, and time stamp.
962 (listing_general_info): New function.
963 (print_options): New function.
964 (print_single_option): New function.
965 (print_timestamp): New function.
966 (MAX_DATELEN): Define.
967 (listing_print): Add call to listing_general_info.
968 * listing.h (LISTING_GENERAL): Define.
969 (listing_print): Add new parameter.
970 * as.c (show_usage): Print new switch.
971 (parse_args): Parse new switch.
972 (main): Pass command line on to listing_print.
973 * NEWS: Mention this new feature.
974 * doc/as.texinfo: Document the new sub-option.
976 2008-04-08 Alan Modra <amodra@bigpond.net.au>
978 * dwarf2dbg.c (dwarf2_emit_insn): Simplify test before dwarf2_where
979 call. Delete out of date comment.
980 (dwarf2_consume_line_info): Always clear dwarf2_loc_directive_seen.
981 (dwarf2_emit_label): Don't emit unless there has been a previous
982 .file or we are outputting assembler generated debug.
983 dwarf2_consume_line_info after emitting line info, not before.
984 (out_debug_info): Simplify files_in_use test.
986 2008-04-07 H.J. Lu <hongjiu.lu@intel.com>
988 * config/tc-i386.c (parse_real_register): Return AVX register
989 only if AVX is enabled.
991 2008-04-07 Kaz Kojima <kkojima@rr.iij4u.or.jp>
994 * config/tc-sh64.c (shmedia_md_pcrel_from_section): Use
995 md_pcrel_from_section for BFD_RELOC_64 and BFD_RELOC_64_PCREL.
997 2008-04-04 Adrian Bunk <bunk@stusta.de>
998 Bob Wilson <bob.wilson@acm.org>
1000 * config/tc-xtensa.c (xg_apply_fix_value): Check return code from
1001 call to decode_reloc.
1003 2008-04-04 H.J. Lu <hongjiu.lu@intel.com>
1005 * NEWS: Mention XSAVE. Change CLMUL to PCLMUL.
1007 * config/tc-i386.c (cpu_arch): Add .pclmul.
1008 (md_show_usage): Replace clmul with pclmul.
1009 * doc/c-i386.texi: Likewise.
1011 2008-04-03 H.J. Lu <hongjiu.lu@intel.com>
1013 * NEWS: Mention AES, CLMUL, AVX/FMA and -msse2avx.
1015 * doc/c-i386.texi: Add avx, aes, clmul and fma to -march=.
1016 Document -msse2avx, .avx, .aes, .clmul and .fma.
1018 * config/tc-i386.c (YMMWORD_MNEM_SUFFIX): New.
1019 (vex_prefix): Likewise.
1020 (sse2avx): Likewise.
1021 (CPU_FLAGS_ARCH_MATCH): Likewise.
1022 (CPU_FLAGS_64BIT_MATCH): Likewise.
1023 (CPU_FLAGS_32BIT_MATCH): Likewise.
1024 (CPU_FLAGS_PERFECT_MATCH): Likewise.
1026 (vex_imm4): Likewise.
1027 (fits_in_imm4): Likewise.
1028 (build_vex_prefix): Likewise.
1029 (VEX_check_operands): Likewise.
1030 (bad_implicit_operand): Likewise.
1031 (OPTION_MSSE2AVX): Likewise.
1032 (T_YMMWORD): Likewise.
1033 (_i386_insn): Add vex.
1034 (cpu_arch): Add .avx, .aes, .clmul and .fma.
1035 (cpu_flags_match): Changed to take a pointer to const template.
1036 Enable encoding SSE instructions with VEX prefix for -msse2avx.
1037 (match_mem_size): Also check ymmword.
1038 (operand_type_match): Clear ymmword.
1039 (md_begin): Allow '_' in mnemonic.
1040 (type_names): Add OPERAND_TYPE_VEX_IMM4.
1041 (process_immext): Update assert.
1042 (md_assemble): Don't call process_immext if sse2avx and immext
1043 are true. Call build_vex_prefix if vex is true.
1044 (parse_insn): Updated for cpu_flags_match.
1045 (swap_operands): Handle 5 operands.
1046 (match_template): Handle 5 operands. Updated for cpu_flags_match.
1047 Check regymm. Call VEX_check_operands. Handle YMMWORD_MNEM_SUFFIX.
1048 (process_suffix): Handle YMMWORD_MNEM_SUFFIX.
1049 (check_byte_reg): Check regymm.
1050 (process_operands): Duplicate the destination register for
1051 -msse2avx if needed.
1052 (build_modrm_byte): Updated for instructions with VEX encoding.
1053 (output_insn): Output VEX prefix if needed.
1054 (md_longopts): Add msse2avx.
1055 (md_parse_option): Handle OPTION_MSSE2AVX.
1056 (md_show_usage): Add avx, aes, clmul, fma and -msse2avx.
1057 (intel_e09): Support YMMWORD.
1058 (intel_e11): Likewise.
1059 (intel_get_token): Likewise.
1061 2008-03-28 Eric B. Weddington <eric.weddington@atmel.com>
1063 * config/tc-avr.c (mcu_types): Add attiny167.
1064 * doc/c-avr.texi: Likewise.
1066 2008-03-28 Eric B. Weddington <eric.weddington@atmel.com>
1068 * config/tc-avr.c (mcu_types): Add atmega32u4.
1069 * doc/c-avr.texi: Likewise.
1071 2008-03-28 Eric B. Weddington <eric.weddington@atmel.com>
1073 * config/tc-avr.c (mcu_types): Add atmega32c1.
1074 * doc/c-avr.texi: Likewise.
1076 2008-03-28 Paul Brook <paul@codesourcery.com>
1078 * config/tc-arm.c (parse_neon_mov): Parse register before immediate
1079 to avoid spurious symbols.
1081 2008-03-28 Nathan Sidwell <nathan@codesourcery.com>
1083 * config/tc-m68k.c (md_convert_frag_1): Replace as_fatal with
1086 2008-03-27 Eric B. Weddington <eric.weddington@atmel.com>
1088 * config/tc-avr.c (mcu_types): Add atmega32m1.
1089 * doc/c-avr.texi: Likewise.
1091 2008-03-27 Ineiev <ineiev@yahoo.co.uk>
1093 * config/tc-arm.c (do_neon_cvt): Move variable declarations to
1095 (do_neon_ext): Fix sign of comparison.
1097 2008-03-26 Bernd Schmidt <bernd.schmidt@analog.com>
1099 From Jie Zhang <jie.zhang@analog.com>
1100 * config/bfin-parse.y (asm_1): Check AREGS in comparison
1101 instructions. And call yyerror when comparing PREG with
1103 (check_macfunc_option): New.
1104 (check_macfuncs): Check option by calling check_macfunc_option.
1105 Fix comparison always true warnings. Both scalar instructions
1106 of vector instruction must share the same mode option. Only allow
1107 option mode at the end of the second instruction of the vector.
1108 (asm_1): Check option by calling check_macfunc_option.
1110 * config/bfin-parse.y (check_macfunc_option): Allow (IU)
1111 option for multiply and multiply-accumulate to data register
1113 (check_macfuncs): Don't check if accumulator matches the data register
1115 (assign_macfunc): Check if accumulator matches the
1116 data register in each rule that moves to the data
1119 * config/tc-bfin.c (bfin_start_line_hook): Localize the labels
1120 generated for LOOP_BEGIN and LOOP_END instructions.
1121 (bfin_gen_loop): Likewise.
1123 2008-03-19 Andreas Krebbel <krebbel1@de.ibm.com>
1125 * config/tc-s390.c (md_parse_option): z10 option added.
1127 2008-03-17 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
1129 * aclocal.m4: Regenerate.
1130 * configure: Likewise.
1131 * Makefile.in: Likewise.
1132 * doc/Makefile.in: Likewise.
1134 2008-03-17 Adrian Bunk <bunk@stusta.de>
1137 * config/tc-hppa.c (is_same_frag): Delete.
1139 2008-03-14 Sterling Augustine <sterling@tensilica.com>
1141 * config/tc-xtensa.h (xtensa_relax_statesE): Update comment for
1142 RELAX_LOOP_END_ADD_NOP.
1144 2008-03-13 Evandro Menezes <evandro@yahoo.com>
1147 * read.c (s_mexit): Warn if attempting to exit a macro when not
1148 inside a macro definition.
1150 2008-03-13 Alan Modra <amodra@bigpond.net.au>
1152 * Makefile.am: Run "make dep-am".
1153 * Makefile.in: Regenerate.
1154 * configure: Regenerate.
1156 2008-03-09 Paul Brook <paul@codesourcery.com>
1158 * config/tc-arm.c (arm_cpu_option_table): Add cortex-a9.
1159 * doc/c-arm.texi: Add cortex-a9.
1161 2008-03-09 Paul Brook <paul@codesourcery.com>
1163 * config/tc-arm.c (fpu_vfp_ext_d32): New vairable.
1164 (parse_vfp_reg_list, encode_arm_vfp_reg): Use it.
1165 (arm_option_cpu_value): Add vfpv3-d16, vfpv2 and vfpv3.
1166 (aeabi_set_public_attributes): Handle Tag_VFP_arch=VFPV3-D16.
1167 * doc/c-arm.texi: Document new ARM FPU variants.
1169 2008-03-07 Paul Brook <paul@codesourcery.com>
1171 * config/tc-arm.c (md_apply_fix): Use correct offset range.
1173 2008-03-07 Alan Modra <amodra@bigpond.net.au>
1175 * config/tc-ppc.c (ppc_setup_opcodes): Tidy. Add code to test
1176 for strict ordering of powerpc_opcodes, but disable for now.
1178 2008-03-04 Paul Brook <paul@codesourcery.com>
1180 * config/tc-arm.c (arm_ext_barrier, arm_ext_msr): New.
1181 (arm_ext_v7m): Rename...
1182 (arm_ext_m): ... to this. Include v6-M.
1183 (do_t_add_sub): Allow narrow low-reg non flag setting adds.
1184 (do_t_mrs, do_t_msr, aeabi_set_public_attributes): Use arm_ext_m.
1185 (md_assemble): Allow wide msr instructions.
1186 (insns): Add classifications for v6-m instructions.
1187 (arm_cpu_option_table): Add cortex-m1.
1188 (arm_arch_option_table): Add armv6-m.
1189 (cpu_arch): Add ARM_ARCH_V6M. Fix numbering of other v6 variants.
1191 2008-03-03 Sterling Augustine <sterling@tensilica.com>
1192 Bob Wilson <bob.wilson@acm.org>
1194 * config/tc-xtensa.c (xtensa_num_pipe_stages): New.
1195 (md_begin): Initialize it.
1196 (resources_conflict): Use it.
1198 2008-03-03 Sterling Augustine <sterling@tensilica.com>
1200 * config/tc-xtensa.h (RELAX_XTENSA_NONE): New.
1202 2008-03-03 Denys Vlasenko <vda.linux@googlemail.com>
1203 H.J. Lu <hongjiu.lu@intel.com>
1206 * read.c (pseudo_set): Don't allow global register symbol.
1208 * symbols.c (S_SET_EXTERNAL): Don't allow register symbol
1211 2008-03-03 H.J. Lu <hongjiu.lu@intel.com>
1214 * write.c (write_object_file): Don't allow symbols which were
1215 equated to register. Stop if there is an error.
1217 2008-03-01 Alan Modra <amodra@bigpond.net.au>
1219 * config/tc-ppc.h (struct _ppc_fix_extra): New.
1221 (TC_FIX_TYPE, TC_INIT_FIX_DATA): Define.
1222 * config/tc-ppc.c (ppu_cpu): Make global.
1223 (ppc_insert_operand): Add ppu_cpu parameter.
1224 (md_assemble): Adjust for above change.
1225 (md_apply_fix): Pass tc_fix_data.ppc_cpu to ppc_insert_operand.
1227 2008-02-22 Nick Clifton <nickc@redhat.com>
1229 * config/tc-arm.c (do_bx): Only test EF_ARM_EABI_VERSION on ELF
1230 targeted ARM ports, otherwise just skip generating the reloc.
1232 2008-02-18 H.J. Lu <hongjiu.lu@intel.com>
1234 * doc/c-i386.texi: Update -march= and .arch.
1236 2008-02-18 Nick Clifton <nickc@redhat.com>
1238 * config/tc-mn10300.c (has_known_symbol_location): New function.
1239 Do not regard weak symbols as having a known location.
1240 (md_estimate_size_before_relax): Use new function.
1241 (md_pcrel_from): Do not compute a pcrel against a weak symbol.
1243 2008-02-18 Jan Beulich <jbeulich@novell.com>
1245 * config/tc-i386.c (match_template): Disallow 'l' suffix when
1246 currently selected CPU has no 32-bit support.
1247 (parse_real_register): Do not return registers not available on
1248 currently selected CPU.
1250 2008-02-16 H.J. Lu <hongjiu.lu@intel.com>
1252 * config/tc-i386.c (process_immext): Fix format.
1254 2008-02-16 H.J. Lu <hongjiu.lu@intel.com>
1256 * config/tc-i386.c (inoutportreg): New.
1257 (process_immext): New.
1258 (md_assemble): Use it.
1259 (update_imm): Use imm16 and imm32s.
1260 (i386_att_operand): Use inoutportreg.
1262 2008-02-14 H.J. Lu <hongjiu.lu@intel.com>
1264 * config/tc-i386.c (operand_type_all_zero): New.
1265 (operand_type_set): Likewise.
1266 (operand_type_equal): Likewise.
1267 (cpu_flags_all_zero): Likewise.
1268 (cpu_flags_set): Likewise.
1269 (cpu_flags_equal): Likewise.
1270 (UINTS_ALL_ZERO): Removed.
1271 (UINTS_SET): Likewise.
1272 (UINTS_CLEAR): Likewise.
1273 (UINTS_EQUAL): Likewise.
1274 (cpu_flags_match): Updated.
1275 (smallest_imm_type): Likewise.
1276 (set_cpu_arch): Likewise.
1277 (md_assemble): Likewise.
1278 (optimize_imm): Likewise.
1279 (match_template): Likewise.
1280 (process_suffix): Likewise.
1281 (update_imm): Likewise.
1282 (process_drex): Likewise.
1283 (process_operands): Likewise.
1284 (build_modrm_byte): Likewise.
1285 (i386_immediate): Likewise.
1286 (i386_displacement): Likewise.
1287 (i386_att_operand): Likewise.
1288 (parse_real_register): Likewise.
1289 (md_parse_option): Likewise.
1290 (i386_target_format): Likewise.
1292 2008-02-14 Dimitry Andric <dimitry@andric.com>
1295 * config/tc-arm.c (s_arm_unwind_save): Advance the input line
1296 pointer past the comma after parsing a floating point register
1299 2008-02-14 Hakan Ardo <hakan@debian.org>
1302 * config/tc-avr.c (mcu_types): Change the ISA tyoe of the attiny26
1304 (avr_operand): Disallow post-increment addressing in the lpm
1305 instruction for the attiny26.
1307 2008-02-13 Jan Beulich <jbeulich@novell.com>
1309 * config/tc-i386.c (parse_real_register): Don't return 'FLAT'
1310 if not in Intel mode.
1311 (i386_intel_operand): Ignore segment overrides in immediate and
1313 (intel_e11): Range-check i.mem_operands before use as array
1314 index. Filter out FLAT for uses other than as segment override.
1315 (intel_get_token): Remove broken promotion of "FLAT:" to mean
1318 2008-02-13 Jan Beulich <jbeulich@novell.com>
1320 * config/tc-i386.c (intel_e09): Also special-case 'bound'.
1322 2008-02-13 Jan Beulich <jbeulich@novell.com>
1324 * config/tc-i386.c (allow_pseudo_reg): New.
1325 (parse_real_register): Check for NULL just once. Allow all
1326 register table entries when allow_pseudo_reg is non-zero.
1327 Don't allow any registers without type when allow_pseudo_reg
1329 (tc_x86_regname_to_dw2regnum): Replace with ...
1330 (tc_x86_parse_to_dw2regnum): ... this.
1331 (tc_x86_frame_initial_instructions): Adjust for above change.
1332 * config/tc-i386.h (tc_regname_to_dw2regnum): Remove.
1333 (tc_parse_to_dw2regnum): New.
1334 (tc_x86_regname_to_dw2regnum): Replace with ...
1335 (tc_x86_parse_to_dw2regnum): ... this.
1336 * dw2gencfi.c (tc_parse_to_dw2regnum): New, broken out of ...
1337 (cfi_parse_reg): ... this. Use tc_parse_to_dw2regnum. Adjust
1340 2008-02-12 Nick Clifton <nickc@redhat.com>
1342 * config/tc-tic4x.c (tic4x_insn_insert): Add const qualifier to
1344 (tic4x_insn_add): Likewise.
1345 (md_begin): Drop cast that was discarding a const qualifier.
1346 * config/tc-d30v.c (get_reloc): Add const qualifier to op
1348 (build_insn): Drop cast that was discarding a const qualifier.
1350 2008-02-11 H.J. Lu <hongjiu.lu@intel.com>
1352 * config/tc-i386.c (cpu_arch): Add .xsave.
1353 (md_show_usage): Add .xsave.
1355 * doc/c-i386.texi: Add xsave to -march=.
1357 2008-02-07 Alan Modra <amodra@bigpond.net.au>
1359 * read.c (s_weakref): Don't pass unadorned NULL to concat.
1360 * config/tc-i386.c (set_cpu_arch, md_parse_option): Likewise.
1362 2008-02-05 Sterling Augustine <sterling@tensilica.com>
1364 * config/tc-xtensa.c (relax_frag_immed): Change internal consistency
1365 checks into assertions. When relaxation produces an operation that
1366 does not fit in the current FLIX instruction, make sure that the
1367 operation is relaxed as needed to account for being placed following
1368 the current instruction.
1370 2008-02-04 H.J. Lu <hongjiu.lu@intel.com>
1373 * configure: Regenerated.
1375 2008-02-04 Adam Nemet <anemet@caviumnetworks.com>
1377 * config/tc-mips.c (mips_cpu_info_table): Add Octeon.
1379 2008-01-31 Marc Gauthier <marc@tensilica.com>
1381 * configure.tgt (xtensa*-*-*): Recognize processor variants.
1383 2008-01-25 Kai Tietz <kai.tietz@onevision.com>
1385 * read.c: (emit_expr): Correct for mingw use of printf size
1388 2008-01-24 Bob Wilson <bob.wilson@acm.org>
1390 * doc/c-xtensa.texi (Xtensa Syntax): Clarify handling of opcodes that
1391 can only be encoded in FLIX instructions but are not specified as such.
1392 (Xtensa Automatic Alignment): Remove obsolete comment about debugging
1395 2008-01-24 H.J. Lu <hongjiu.lu@intel.com>
1397 * NEWS: Mention new command line options for x86 targets.
1399 2008-01-23 H.J. Lu <hongjiu.lu@intel.com>
1401 * config/tc-i386.c (md_show_usage): Replace tabs with spaces.
1403 2008-01-23 Eric B. Weddington <eric.weddington@atmel.com>
1405 * config/tc-avr.c (mcu_types): Change opcode set for at86rf401.
1407 2008-01-23 H.J. Lu <hongjiu.lu@intel.com>
1409 * config/tc-i386.c (md_show_usage): Show more processors for
1412 2008-01-22 H.J. Lu <hongjiu.lu@intel.com>
1414 * config/tc-i386.c (i386_target_format): Remove cpummx2.
1416 2008-01-22 H.J. Lu <hongjiu.lu@intel.com>
1418 * config/tc-i386.c (XXX_PREFIX): Moved from tc-i386.h.
1419 (XXX_MNEM_SUFFIX): Likewise.
1420 (END_OF_INSN): Likewise.
1421 (templates): Likewise.
1422 (modrm_byte): Likewise.
1423 (rex_byte): Likewise.
1424 (DREX_XXX): Likewise.
1425 (drex_byte): Likewise.
1426 (sib_byte): Likewise.
1427 (processor_type): Likewise.
1428 (arch_entry): Likewise.
1429 (cpu_sub_arch_name): Remove const.
1430 (cpu_arch): Add .vmx and .smx.
1431 (set_cpu_arch): Append cpu_sub_arch_name.
1432 (md_parse_option): Support -march=CPU[,+EXTENSION...].
1433 (md_show_usage): Updated.
1435 * config/tc-i386.h (XXX_PREFIX): Moved to tc-i386.c.
1436 (XXX_MNEM_SUFFIX): Likewise.
1437 (END_OF_INSN): Likewise.
1438 (templates): Likewise.
1439 (modrm_byte): Likewise.
1440 (rex_byte): Likewise.
1441 (DREX_XXX): Likewise.
1442 (drex_byte): Likewise.
1443 (sib_byte): Likewise.
1444 (processor_type): Likewise.
1445 (arch_entry): Likewise.
1447 * doc/as.texinfo: Update i386 -march option.
1449 * doc/c-i386.texi: Update -march= for ISA.
1451 2008-01-18 Bob Wilson <bob.wilson@acm.org>
1453 * config/tc-xtensa.c (xtensa_leb128): New function.
1454 (md_pseudo_table): Use it for sleb128 and uleb128.
1455 (is_leb128_expr): New internal flag.
1456 (xtensa_symbol_new_hook): Check new flag.
1458 2008-01-16 Eric B. Weddington <eric.weddington@atmel.com>
1460 * config/tc-avr.c (mcu_types): Change opcode set for avr3,
1461 at90usb82, at90usb162.
1462 * doc/c-avr.texi: Change architecture grouping for at90usb82,
1464 These changes support the new avr35 architecture group in gcc.
1466 2008-01-15 H.J. Lu <hongjiu.lu@intel.com>
1468 * config/tc-i386.c (md_assemble): Also zap movzx and movsx
1469 suffix for AT&T syntax.
1471 2008-01-14 H.J. Lu <hongjiu.lu@intel.com>
1473 * config/tc-i386.c (match_reg_size): New.
1474 (match_mem_size): Likewise.
1475 (operand_size_match): Likewise.
1476 (operand_type_match): Also clear all size fields.
1477 (match_template): Skip Intel syntax when in AT&T syntax.
1478 Call operand_size_match to check operand size.
1479 (i386_att_operand): Set the mem field to 1 for memory
1481 (i386_intel_operand): Likewise.
1483 2008-01-12 H.J. Lu <hongjiu.lu@intel.com>
1486 * config/tc-i386.c (_i386_insn): Update comment.
1487 (operand_type_match): Also clear unspecified.
1488 (operand_type_register_match): Likewise.
1489 (parse_operands): Initialize unspecified.
1490 (i386_intel_operand): Likewise.
1491 (match_template): Check memory and accumulator operand size.
1492 (i386_att_operand): Clear unspecified on register operand.
1493 (intel_e11): Likewise.
1494 (intel_e09): Set operand size and clean unspecified for
1497 2008-01-11 Andreas Schwab <schwab@suse.de>
1499 * read.c (s_space): Declare `repeat' as offsetT.
1501 2008-01-10 H.J. Lu <hongjiu.lu@intel.com>
1503 * config/tc-i386.c (match_template): Check processor support
1506 2008-01-10 H.J. Lu <hongjiu.lu@intel.com>
1508 * config/tc-i386.c (match_template): Continue if processor
1511 2008-01-09 Alexandre Oliva <aoliva@redhat.com>
1513 * config/tc-ia64.c (ia64_convert_frag): Zero-initialize room for
1514 unwind personality function address.
1516 2008-01-09 Bob Wilson <bob.wilson@acm.org>
1518 * dwarf2dbg.c (out_sleb128): Delete.
1519 (size_fixed_inc_line_addr, emit_fixed_inc_line_addr): New.
1520 (out_fixed_inc_line_addr): Delete.
1521 (relax_inc_line_addr, dwarf2dbg_estimate_size_before_relax): Call new
1522 size_fixed_inc_line_addr if DWARF2_USE_FIXED_ADVANCE_PC is set.
1523 (dwarf2dbg_convert_frag): Likewise for emit_fixed_inc_line_addr.
1524 (process_entries): Remove calls to out_fixed_inc_line_addr. When
1525 DWARF2_USE_FIXED_ADVANCE_PC is set, call relax_inc_line_addr.
1526 * read.h (emit_expr_fix): New prototype.
1527 * read.c (emit_expr): Move code to emit_expr_fix and use it here.
1528 (emit_expr_fix): New.
1530 2008-01-09 H.J. Lu <hongjiu.lu@intel.com>
1532 * config/tc-i386.c (match_template): Check register size
1533 only when size of operands can be encoded the canonical way.
1535 2008-01-08 H.J. Lu <hongjiu.lu@intel.com>
1537 * config/tc-i386.c (i386_operand): Renamed to ...
1538 (i386_att_operand): This.
1539 (parse_operands): Updated.
1541 2008-01-05 H.J. Lu <hongjiu.lu@intel.com>
1543 * doc/c-i386.texi: Update .att_mnemonic and .intel_mnemonic.
1545 * config/tc-i386.c (set_intel_mnemonic): Set intel_mnemonic
1547 (md_assemble): Remove Intel mode workaround.
1548 (match_template): Check support for old gcc, AT&T mnemonic
1550 (md_parse_option): Don't set intel_mnemonic to 0 for
1553 2008-01-04 H.J. Lu <hongjiu.lu@intel.com>
1555 * config/tc-i386.h: Update copyright to 2008.
1557 2008-01-04 Nick Clifton <nickc@redhat.com>
1559 * config/tc-ppc.c (parse_cpu): Preserve the settings of the
1560 PPC_OPCODE_ALTIVEC and PPC_OPCODE_SPE flags.
1562 2008-01-03 H.J. Lu <hongjiu.lu@intel.com>
1564 * config/tc-i386.c (md_assemble): Use !intel_mnemonic instead
1567 2008-01-03 H.J. Lu <hongjiu.lu@intel.com>
1569 * gas/config/tc-i386.c (cpu_arch_flags_not): Removed.
1570 (cpu_flags_not): Likewise.
1571 (cpu_flags_match): Updated to check 64bit and arch.
1572 (set_code_flag): Remove cpu_arch_flags_not.
1573 (set_16bit_gcc_code_flag): Likewise.
1574 (set_cpu_arch): Likewise.
1575 (md_begin): Likewise.
1576 (parse_insn): Call cpu_flags_match to check 64bit and arch.
1577 (match_template): Likewise.
1579 2008-01-03 Jakub Jelinek <jakub@redhat.com>
1581 * config/tc-i386.c (process_drex): Initialize modrm_reg and
1582 modrm_regmem to 0 instead of None.
1584 2008-01-03 H.J. Lu <hongjiu.lu@intel.com>
1586 * config/tc-i386.c (match_template): Use the xmmword field
1589 2008-01-02 H.J. Lu <hongjiu.lu@intel.com>
1591 * config/tc-i386.c (process_suffix): Fix a typo.
1593 2008-01-02 H.J. Lu <hongjiu.lu@intel.com>
1596 * config/tc-i386.c (match_template): Handle XMMWORD_MNEM_SUFFIX.
1597 Check memory size in Intel mode.
1598 (process_suffix): Handle XMMWORD_MNEM_SUFFIX.
1599 (intel_e09): Likewise.
1601 * config/tc-i386.h (XMMWORD_MNEM_SUFFIX): New.
1603 2008-01-02 Catherine Moore <clm@codesourcery.com>
1605 * config/tc-mips.c (mips_ip): Check operands on jalr instruction.
1607 For older changes see ChangeLog-2007
1613 version-control: never