1 /* tc-i386.c -- Assemble code for the Intel 80386
2 Copyright 1989, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
3 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
4 Free Software Foundation, Inc.
6 This file is part of GAS, the GNU Assembler.
8 GAS is free software; you can redistribute it and/or modify
9 it under the terms of the GNU General Public License as published by
10 the Free Software Foundation; either version 2, or (at your option)
13 GAS is distributed in the hope that it will be useful,
14 but WITHOUT ANY WARRANTY; without even the implied warranty of
15 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 GNU General Public License for more details.
18 You should have received a copy of the GNU General Public License
19 along with GAS; see the file COPYING. If not, write to the Free
20 Software Foundation, 51 Franklin Street - Fifth Floor, Boston, MA
23 /* Intel 80386 machine specific gas.
24 Written by Eliot Dresselhaus (eliot@mgm.mit.edu).
25 x86_64 support by Jan Hubicka (jh@suse.cz)
26 VIA PadLock support by Michal Ludvig (mludvig@suse.cz)
27 Bugs & suggestions are completely welcome. This is free software.
28 Please help us make it better. */
31 #include "safe-ctype.h"
33 #include "dwarf2dbg.h"
34 #include "dw2gencfi.h"
35 #include "elf/x86-64.h"
37 #ifndef REGISTER_WARNINGS
38 #define REGISTER_WARNINGS 1
41 #ifndef INFER_ADDR_PREFIX
42 #define INFER_ADDR_PREFIX 1
45 #ifndef SCALE1_WHEN_NO_INDEX
46 /* Specifying a scale factor besides 1 when there is no index is
47 futile. eg. `mov (%ebx,2),%al' does exactly the same as
48 `mov (%ebx),%al'. To slavishly follow what the programmer
49 specified, set SCALE1_WHEN_NO_INDEX to 0. */
50 #define SCALE1_WHEN_NO_INDEX 1
54 #define DEFAULT_ARCH "i386"
59 #define INLINE __inline__
65 static void set_code_flag (int);
66 static void set_16bit_gcc_code_flag (int);
67 static void set_intel_syntax (int);
68 static void set_cpu_arch (int);
70 static void pe_directive_secrel (int);
72 static void signed_cons (int);
73 static char *output_invalid (int c
);
74 static int i386_operand (char *);
75 static int i386_intel_operand (char *, int);
76 static const reg_entry
*parse_register (char *, char **);
77 static char *parse_insn (char *, char *);
78 static char *parse_operands (char *, const char *);
79 static void swap_operands (void);
80 static void swap_2_operands (int, int);
81 static void optimize_imm (void);
82 static void optimize_disp (void);
83 static int match_template (void);
84 static int check_string (void);
85 static int process_suffix (void);
86 static int check_byte_reg (void);
87 static int check_long_reg (void);
88 static int check_qword_reg (void);
89 static int check_word_reg (void);
90 static int finalize_imm (void);
91 static int process_operands (void);
92 static const seg_entry
*build_modrm_byte (void);
93 static void output_insn (void);
94 static void output_imm (fragS
*, offsetT
);
95 static void output_disp (fragS
*, offsetT
);
97 static void s_bss (int);
99 #if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
100 static void handle_large_common (int small ATTRIBUTE_UNUSED
);
103 static const char *default_arch
= DEFAULT_ARCH
;
105 /* 'md_assemble ()' gathers together information and puts it into a
112 const reg_entry
*regs
;
117 /* TM holds the template for the insn were currently assembling. */
120 /* SUFFIX holds the instruction mnemonic suffix if given.
121 (e.g. 'l' for 'movl') */
124 /* OPERANDS gives the number of given operands. */
125 unsigned int operands
;
127 /* REG_OPERANDS, DISP_OPERANDS, MEM_OPERANDS, IMM_OPERANDS give the number
128 of given register, displacement, memory operands and immediate
130 unsigned int reg_operands
, disp_operands
, mem_operands
, imm_operands
;
132 /* TYPES [i] is the type (see above #defines) which tells us how to
133 use OP[i] for the corresponding operand. */
134 unsigned int types
[MAX_OPERANDS
];
136 /* Displacement expression, immediate expression, or register for each
138 union i386_op op
[MAX_OPERANDS
];
140 /* Flags for operands. */
141 unsigned int flags
[MAX_OPERANDS
];
142 #define Operand_PCrel 1
144 /* Relocation type for operand */
145 enum bfd_reloc_code_real reloc
[MAX_OPERANDS
];
147 /* BASE_REG, INDEX_REG, and LOG2_SCALE_FACTOR are used to encode
148 the base index byte below. */
149 const reg_entry
*base_reg
;
150 const reg_entry
*index_reg
;
151 unsigned int log2_scale_factor
;
153 /* SEG gives the seg_entries of this insn. They are zero unless
154 explicit segment overrides are given. */
155 const seg_entry
*seg
[2];
157 /* PREFIX holds all the given prefix opcodes (usually null).
158 PREFIXES is the number of prefix opcodes. */
159 unsigned int prefixes
;
160 unsigned char prefix
[MAX_PREFIXES
];
162 /* RM and SIB are the modrm byte and the sib byte where the
163 addressing modes of this insn are encoded. */
170 typedef struct _i386_insn i386_insn
;
172 /* List of chars besides those in app.c:symbol_chars that can start an
173 operand. Used to prevent the scrubber eating vital white-space. */
174 const char extra_symbol_chars
[] = "*%-(["
183 #if (defined (TE_I386AIX) \
184 || ((defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)) \
185 && !defined (TE_GNU) \
186 && !defined (TE_LINUX) \
187 && !defined (TE_NETWARE) \
188 && !defined (TE_FreeBSD) \
189 && !defined (TE_NetBSD)))
190 /* This array holds the chars that always start a comment. If the
191 pre-processor is disabled, these aren't very useful. The option
192 --divide will remove '/' from this list. */
193 const char *i386_comment_chars
= "#/";
194 #define SVR4_COMMENT_CHARS 1
195 #define PREFIX_SEPARATOR '\\'
198 const char *i386_comment_chars
= "#";
199 #define PREFIX_SEPARATOR '/'
202 /* This array holds the chars that only start a comment at the beginning of
203 a line. If the line seems to have the form '# 123 filename'
204 .line and .file directives will appear in the pre-processed output.
205 Note that input_file.c hand checks for '#' at the beginning of the
206 first line of the input file. This is because the compiler outputs
207 #NO_APP at the beginning of its output.
208 Also note that comments started like this one will always work if
209 '/' isn't otherwise defined. */
210 const char line_comment_chars
[] = "#/";
212 const char line_separator_chars
[] = ";";
214 /* Chars that can be used to separate mant from exp in floating point
216 const char EXP_CHARS
[] = "eE";
218 /* Chars that mean this number is a floating point constant
221 const char FLT_CHARS
[] = "fFdDxX";
223 /* Tables for lexical analysis. */
224 static char mnemonic_chars
[256];
225 static char register_chars
[256];
226 static char operand_chars
[256];
227 static char identifier_chars
[256];
228 static char digit_chars
[256];
230 /* Lexical macros. */
231 #define is_mnemonic_char(x) (mnemonic_chars[(unsigned char) x])
232 #define is_operand_char(x) (operand_chars[(unsigned char) x])
233 #define is_register_char(x) (register_chars[(unsigned char) x])
234 #define is_space_char(x) ((x) == ' ')
235 #define is_identifier_char(x) (identifier_chars[(unsigned char) x])
236 #define is_digit_char(x) (digit_chars[(unsigned char) x])
238 /* All non-digit non-letter characters that may occur in an operand. */
239 static char operand_special_chars
[] = "%$-+(,)*._~/<>|&^!:[@]";
241 /* md_assemble() always leaves the strings it's passed unaltered. To
242 effect this we maintain a stack of saved characters that we've smashed
243 with '\0's (indicating end of strings for various sub-fields of the
244 assembler instruction). */
245 static char save_stack
[32];
246 static char *save_stack_p
;
247 #define END_STRING_AND_SAVE(s) \
248 do { *save_stack_p++ = *(s); *(s) = '\0'; } while (0)
249 #define RESTORE_END_STRING(s) \
250 do { *(s) = *--save_stack_p; } while (0)
252 /* The instruction we're assembling. */
255 /* Possible templates for current insn. */
256 static const templates
*current_templates
;
258 /* Per instruction expressionS buffers: max displacements & immediates. */
259 static expressionS disp_expressions
[MAX_MEMORY_OPERANDS
];
260 static expressionS im_expressions
[MAX_IMMEDIATE_OPERANDS
];
262 /* Current operand we are working on. */
263 static int this_operand
;
265 /* We support four different modes. FLAG_CODE variable is used to distinguish
272 #define NUM_FLAG_CODE ((int) CODE_64BIT + 1)
274 static enum flag_code flag_code
;
275 static unsigned int object_64bit
;
276 static int use_rela_relocations
= 0;
278 /* The names used to print error messages. */
279 static const char *flag_code_names
[] =
286 /* 1 for intel syntax,
288 static int intel_syntax
= 0;
290 /* 1 if register prefix % not required. */
291 static int allow_naked_reg
= 0;
293 /* Register prefix used for error message. */
294 static const char *register_prefix
= "%";
296 /* Used in 16 bit gcc mode to add an l suffix to call, ret, enter,
297 leave, push, and pop instructions so that gcc has the same stack
298 frame as in 32 bit mode. */
299 static char stackop_size
= '\0';
301 /* Non-zero to optimize code alignment. */
302 int optimize_align_code
= 1;
304 /* Non-zero to quieten some warnings. */
305 static int quiet_warnings
= 0;
308 static const char *cpu_arch_name
= NULL
;
309 static const char *cpu_sub_arch_name
= NULL
;
311 /* CPU feature flags. */
312 static unsigned int cpu_arch_flags
= CpuUnknownFlags
| CpuNo64
;
314 /* If we have selected a cpu we are generating instructions for. */
315 static int cpu_arch_tune_set
= 0;
317 /* Cpu we are generating instructions for. */
318 static enum processor_type cpu_arch_tune
= PROCESSOR_UNKNOWN
;
320 /* CPU feature flags of cpu we are generating instructions for. */
321 static unsigned int cpu_arch_tune_flags
= 0;
323 /* CPU instruction set architecture used. */
324 static enum processor_type cpu_arch_isa
= PROCESSOR_UNKNOWN
;
326 /* CPU feature flags of instruction set architecture used. */
327 static unsigned int cpu_arch_isa_flags
= 0;
329 /* If set, conditional jumps are not automatically promoted to handle
330 larger than a byte offset. */
331 static unsigned int no_cond_jump_promotion
= 0;
333 /* Pre-defined "_GLOBAL_OFFSET_TABLE_". */
334 static symbolS
*GOT_symbol
;
336 /* The dwarf2 return column, adjusted for 32 or 64 bit. */
337 unsigned int x86_dwarf2_return_column
;
339 /* The dwarf2 data alignment, adjusted for 32 or 64 bit. */
340 int x86_cie_data_alignment
;
342 /* Interface to relax_segment.
343 There are 3 major relax states for 386 jump insns because the
344 different types of jumps add different sizes to frags when we're
345 figuring out what sort of jump to choose to reach a given label. */
348 #define UNCOND_JUMP 0
350 #define COND_JUMP86 2
355 #define SMALL16 (SMALL | CODE16)
357 #define BIG16 (BIG | CODE16)
361 #define INLINE __inline__
367 #define ENCODE_RELAX_STATE(type, size) \
368 ((relax_substateT) (((type) << 2) | (size)))
369 #define TYPE_FROM_RELAX_STATE(s) \
371 #define DISP_SIZE_FROM_RELAX_STATE(s) \
372 ((((s) & 3) == BIG ? 4 : (((s) & 3) == BIG16 ? 2 : 1)))
374 /* This table is used by relax_frag to promote short jumps to long
375 ones where necessary. SMALL (short) jumps may be promoted to BIG
376 (32 bit long) ones, and SMALL16 jumps to BIG16 (16 bit long). We
377 don't allow a short jump in a 32 bit code segment to be promoted to
378 a 16 bit offset jump because it's slower (requires data size
379 prefix), and doesn't work, unless the destination is in the bottom
380 64k of the code segment (The top 16 bits of eip are zeroed). */
382 const relax_typeS md_relax_table
[] =
385 1) most positive reach of this state,
386 2) most negative reach of this state,
387 3) how many bytes this mode will have in the variable part of the frag
388 4) which index into the table to try if we can't fit into this one. */
390 /* UNCOND_JUMP states. */
391 {127 + 1, -128 + 1, 1, ENCODE_RELAX_STATE (UNCOND_JUMP
, BIG
)},
392 {127 + 1, -128 + 1, 1, ENCODE_RELAX_STATE (UNCOND_JUMP
, BIG16
)},
393 /* dword jmp adds 4 bytes to frag:
394 0 extra opcode bytes, 4 displacement bytes. */
396 /* word jmp adds 2 byte2 to frag:
397 0 extra opcode bytes, 2 displacement bytes. */
400 /* COND_JUMP states. */
401 {127 + 1, -128 + 1, 1, ENCODE_RELAX_STATE (COND_JUMP
, BIG
)},
402 {127 + 1, -128 + 1, 1, ENCODE_RELAX_STATE (COND_JUMP
, BIG16
)},
403 /* dword conditionals adds 5 bytes to frag:
404 1 extra opcode byte, 4 displacement bytes. */
406 /* word conditionals add 3 bytes to frag:
407 1 extra opcode byte, 2 displacement bytes. */
410 /* COND_JUMP86 states. */
411 {127 + 1, -128 + 1, 1, ENCODE_RELAX_STATE (COND_JUMP86
, BIG
)},
412 {127 + 1, -128 + 1, 1, ENCODE_RELAX_STATE (COND_JUMP86
, BIG16
)},
413 /* dword conditionals adds 5 bytes to frag:
414 1 extra opcode byte, 4 displacement bytes. */
416 /* word conditionals add 4 bytes to frag:
417 1 displacement byte and a 3 byte long branch insn. */
421 static const arch_entry cpu_arch
[] =
423 {"generic32", PROCESSOR_GENERIC32
,
424 Cpu186
|Cpu286
|Cpu386
},
425 {"generic64", PROCESSOR_GENERIC64
,
426 Cpu186
|Cpu286
|Cpu386
|Cpu486
|Cpu586
|Cpu686
|CpuP4
|CpuMMX
427 |CpuMMX2
|CpuSSE
|CpuSSE2
},
428 {"i8086", PROCESSOR_UNKNOWN
,
430 {"i186", PROCESSOR_UNKNOWN
,
432 {"i286", PROCESSOR_UNKNOWN
,
434 {"i386", PROCESSOR_GENERIC32
,
435 Cpu186
|Cpu286
|Cpu386
},
436 {"i486", PROCESSOR_I486
,
437 Cpu186
|Cpu286
|Cpu386
|Cpu486
},
438 {"i586", PROCESSOR_PENTIUM
,
439 Cpu186
|Cpu286
|Cpu386
|Cpu486
|Cpu586
},
440 {"i686", PROCESSOR_PENTIUMPRO
,
441 Cpu186
|Cpu286
|Cpu386
|Cpu486
|Cpu586
|Cpu686
},
442 {"pentium", PROCESSOR_PENTIUM
,
443 Cpu186
|Cpu286
|Cpu386
|Cpu486
|Cpu586
},
444 {"pentiumpro",PROCESSOR_PENTIUMPRO
,
445 Cpu186
|Cpu286
|Cpu386
|Cpu486
|Cpu586
|Cpu686
},
446 {"pentiumii", PROCESSOR_PENTIUMPRO
,
447 Cpu186
|Cpu286
|Cpu386
|Cpu486
|Cpu586
|Cpu686
|CpuMMX
},
448 {"pentiumiii",PROCESSOR_PENTIUMPRO
,
449 Cpu186
|Cpu286
|Cpu386
|Cpu486
|Cpu586
|Cpu686
|CpuMMX
|CpuMMX2
|CpuSSE
},
450 {"pentium4", PROCESSOR_PENTIUM4
,
451 Cpu186
|Cpu286
|Cpu386
|Cpu486
|Cpu586
|Cpu686
|CpuP4
|CpuMMX
452 |CpuMMX2
|CpuSSE
|CpuSSE2
},
453 {"prescott", PROCESSOR_NOCONA
,
454 Cpu186
|Cpu286
|Cpu386
|Cpu486
|Cpu586
|Cpu686
|CpuP4
|CpuMMX
455 |CpuMMX2
|CpuSSE
|CpuSSE2
|CpuSSE3
},
456 {"nocona", PROCESSOR_NOCONA
,
457 Cpu186
|Cpu286
|Cpu386
|Cpu486
|Cpu586
|Cpu686
|CpuP4
|CpuMMX
458 |CpuMMX2
|CpuSSE
|CpuSSE2
|CpuSSE3
},
459 {"yonah", PROCESSOR_CORE
,
460 Cpu186
|Cpu286
|Cpu386
|Cpu486
|Cpu586
|Cpu686
|CpuP4
|CpuMMX
461 |CpuMMX2
|CpuSSE
|CpuSSE2
|CpuSSE3
},
462 {"core", PROCESSOR_CORE
,
463 Cpu186
|Cpu286
|Cpu386
|Cpu486
|Cpu586
|Cpu686
|CpuP4
|CpuMMX
464 |CpuMMX2
|CpuSSE
|CpuSSE2
|CpuSSE3
},
465 {"merom", PROCESSOR_CORE2
,
466 Cpu186
|Cpu286
|Cpu386
|Cpu486
|Cpu586
|Cpu686
|CpuP4
|CpuMMX
467 |CpuMMX2
|CpuSSE
|CpuSSE2
|CpuSSE3
|CpuSSSE3
},
468 {"core2", PROCESSOR_CORE2
,
469 Cpu186
|Cpu286
|Cpu386
|Cpu486
|Cpu586
|Cpu686
|CpuP4
|CpuMMX
470 |CpuMMX2
|CpuSSE
|CpuSSE2
|CpuSSE3
|CpuSSSE3
},
472 Cpu186
|Cpu286
|Cpu386
|Cpu486
|Cpu586
|CpuK6
|CpuMMX
},
473 {"k6_2", PROCESSOR_K6
,
474 Cpu186
|Cpu286
|Cpu386
|Cpu486
|Cpu586
|CpuK6
|CpuMMX
|Cpu3dnow
},
475 {"athlon", PROCESSOR_ATHLON
,
476 Cpu186
|Cpu286
|Cpu386
|Cpu486
|Cpu586
|Cpu686
|CpuK6
477 |CpuMMX
|CpuMMX2
|Cpu3dnow
|Cpu3dnowA
},
478 {"sledgehammer", PROCESSOR_K8
,
479 Cpu186
|Cpu286
|Cpu386
|Cpu486
|Cpu586
|Cpu686
|CpuK6
480 |CpuSledgehammer
|CpuMMX
|CpuMMX2
|Cpu3dnow
|Cpu3dnowA
|CpuSSE
|CpuSSE2
},
481 {"opteron", PROCESSOR_K8
,
482 Cpu186
|Cpu286
|Cpu386
|Cpu486
|Cpu586
|Cpu686
|CpuK6
483 |CpuSledgehammer
|CpuMMX
|CpuMMX2
|Cpu3dnow
|Cpu3dnowA
|CpuSSE
|CpuSSE2
},
485 Cpu186
|Cpu286
|Cpu386
|Cpu486
|Cpu586
|Cpu686
|CpuK6
486 |CpuSledgehammer
|CpuMMX
|CpuMMX2
|Cpu3dnow
|Cpu3dnowA
|CpuSSE
|CpuSSE2
},
487 {"amdfam10", PROCESSOR_AMDFAM10
,
488 Cpu186
|Cpu286
|Cpu386
|Cpu486
|Cpu586
|Cpu686
|CpuK6
|CpuSledgehammer
489 |CpuMMX
|CpuMMX2
|Cpu3dnow
|Cpu3dnowA
|CpuSSE
|CpuSSE2
|CpuSSE3
|CpuSSE4a
491 {".mmx", PROCESSOR_UNKNOWN
,
493 {".sse", PROCESSOR_UNKNOWN
,
494 CpuMMX
|CpuMMX2
|CpuSSE
},
495 {".sse2", PROCESSOR_UNKNOWN
,
496 CpuMMX
|CpuMMX2
|CpuSSE
|CpuSSE2
},
497 {".sse3", PROCESSOR_UNKNOWN
,
498 CpuMMX
|CpuMMX2
|CpuSSE
|CpuSSE2
|CpuSSE3
},
499 {".ssse3", PROCESSOR_UNKNOWN
,
500 CpuMMX
|CpuMMX2
|CpuSSE
|CpuSSE2
|CpuSSE3
|CpuSSSE3
},
501 {".3dnow", PROCESSOR_UNKNOWN
,
503 {".3dnowa", PROCESSOR_UNKNOWN
,
504 CpuMMX
|CpuMMX2
|Cpu3dnow
|Cpu3dnowA
},
505 {".padlock", PROCESSOR_UNKNOWN
,
507 {".pacifica", PROCESSOR_UNKNOWN
,
509 {".svme", PROCESSOR_UNKNOWN
,
511 {".sse4a", PROCESSOR_UNKNOWN
,
512 CpuMMX
|CpuMMX2
|CpuSSE
|CpuSSE2
|CpuSSE3
|CpuSSE4a
},
513 {".abm", PROCESSOR_UNKNOWN
,
517 const pseudo_typeS md_pseudo_table
[] =
519 #if !defined(OBJ_AOUT) && !defined(USE_ALIGN_PTWO)
520 {"align", s_align_bytes
, 0},
522 {"align", s_align_ptwo
, 0},
524 {"arch", set_cpu_arch
, 0},
528 {"ffloat", float_cons
, 'f'},
529 {"dfloat", float_cons
, 'd'},
530 {"tfloat", float_cons
, 'x'},
532 {"slong", signed_cons
, 4},
533 {"noopt", s_ignore
, 0},
534 {"optim", s_ignore
, 0},
535 {"code16gcc", set_16bit_gcc_code_flag
, CODE_16BIT
},
536 {"code16", set_code_flag
, CODE_16BIT
},
537 {"code32", set_code_flag
, CODE_32BIT
},
538 {"code64", set_code_flag
, CODE_64BIT
},
539 {"intel_syntax", set_intel_syntax
, 1},
540 {"att_syntax", set_intel_syntax
, 0},
541 #if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
542 {"largecomm", handle_large_common
, 0},
544 {"file", (void (*) (int)) dwarf2_directive_file
, 0},
545 {"loc", dwarf2_directive_loc
, 0},
546 {"loc_mark_labels", dwarf2_directive_loc_mark_labels
, 0},
549 {"secrel32", pe_directive_secrel
, 0},
554 /* For interface with expression (). */
555 extern char *input_line_pointer
;
557 /* Hash table for instruction mnemonic lookup. */
558 static struct hash_control
*op_hash
;
560 /* Hash table for register lookup. */
561 static struct hash_control
*reg_hash
;
564 i386_align_code (fragS
*fragP
, int count
)
566 /* Various efficient no-op patterns for aligning code labels.
567 Note: Don't try to assemble the instructions in the comments.
568 0L and 0w are not legal. */
569 static const char f32_1
[] =
571 static const char f32_2
[] =
572 {0x66,0x90}; /* xchg %ax,%ax */
573 static const char f32_3
[] =
574 {0x8d,0x76,0x00}; /* leal 0(%esi),%esi */
575 static const char f32_4
[] =
576 {0x8d,0x74,0x26,0x00}; /* leal 0(%esi,1),%esi */
577 static const char f32_5
[] =
579 0x8d,0x74,0x26,0x00}; /* leal 0(%esi,1),%esi */
580 static const char f32_6
[] =
581 {0x8d,0xb6,0x00,0x00,0x00,0x00}; /* leal 0L(%esi),%esi */
582 static const char f32_7
[] =
583 {0x8d,0xb4,0x26,0x00,0x00,0x00,0x00}; /* leal 0L(%esi,1),%esi */
584 static const char f32_8
[] =
586 0x8d,0xb4,0x26,0x00,0x00,0x00,0x00}; /* leal 0L(%esi,1),%esi */
587 static const char f32_9
[] =
588 {0x89,0xf6, /* movl %esi,%esi */
589 0x8d,0xbc,0x27,0x00,0x00,0x00,0x00}; /* leal 0L(%edi,1),%edi */
590 static const char f32_10
[] =
591 {0x8d,0x76,0x00, /* leal 0(%esi),%esi */
592 0x8d,0xbc,0x27,0x00,0x00,0x00,0x00}; /* leal 0L(%edi,1),%edi */
593 static const char f32_11
[] =
594 {0x8d,0x74,0x26,0x00, /* leal 0(%esi,1),%esi */
595 0x8d,0xbc,0x27,0x00,0x00,0x00,0x00}; /* leal 0L(%edi,1),%edi */
596 static const char f32_12
[] =
597 {0x8d,0xb6,0x00,0x00,0x00,0x00, /* leal 0L(%esi),%esi */
598 0x8d,0xbf,0x00,0x00,0x00,0x00}; /* leal 0L(%edi),%edi */
599 static const char f32_13
[] =
600 {0x8d,0xb6,0x00,0x00,0x00,0x00, /* leal 0L(%esi),%esi */
601 0x8d,0xbc,0x27,0x00,0x00,0x00,0x00}; /* leal 0L(%edi,1),%edi */
602 static const char f32_14
[] =
603 {0x8d,0xb4,0x26,0x00,0x00,0x00,0x00, /* leal 0L(%esi,1),%esi */
604 0x8d,0xbc,0x27,0x00,0x00,0x00,0x00}; /* leal 0L(%edi,1),%edi */
605 static const char f32_15
[] =
606 {0xeb,0x0d,0x90,0x90,0x90,0x90,0x90, /* jmp .+15; lotsa nops */
607 0x90,0x90,0x90,0x90,0x90,0x90,0x90,0x90};
608 static const char f16_3
[] =
609 {0x8d,0x74,0x00}; /* lea 0(%esi),%esi */
610 static const char f16_4
[] =
611 {0x8d,0xb4,0x00,0x00}; /* lea 0w(%si),%si */
612 static const char f16_5
[] =
614 0x8d,0xb4,0x00,0x00}; /* lea 0w(%si),%si */
615 static const char f16_6
[] =
616 {0x89,0xf6, /* mov %si,%si */
617 0x8d,0xbd,0x00,0x00}; /* lea 0w(%di),%di */
618 static const char f16_7
[] =
619 {0x8d,0x74,0x00, /* lea 0(%si),%si */
620 0x8d,0xbd,0x00,0x00}; /* lea 0w(%di),%di */
621 static const char f16_8
[] =
622 {0x8d,0xb4,0x00,0x00, /* lea 0w(%si),%si */
623 0x8d,0xbd,0x00,0x00}; /* lea 0w(%di),%di */
624 static const char *const f32_patt
[] = {
625 f32_1
, f32_2
, f32_3
, f32_4
, f32_5
, f32_6
, f32_7
, f32_8
,
626 f32_9
, f32_10
, f32_11
, f32_12
, f32_13
, f32_14
, f32_15
628 static const char *const f16_patt
[] = {
629 f32_1
, f32_2
, f16_3
, f16_4
, f16_5
, f16_6
, f16_7
, f16_8
,
630 f32_15
, f32_15
, f32_15
, f32_15
, f32_15
, f32_15
, f32_15
633 static const char alt_3
[] =
635 /* nopl 0(%[re]ax) */
636 static const char alt_4
[] =
637 {0x0f,0x1f,0x40,0x00};
638 /* nopl 0(%[re]ax,%[re]ax,1) */
639 static const char alt_5
[] =
640 {0x0f,0x1f,0x44,0x00,0x00};
641 /* nopw 0(%[re]ax,%[re]ax,1) */
642 static const char alt_6
[] =
643 {0x66,0x0f,0x1f,0x44,0x00,0x00};
644 /* nopl 0L(%[re]ax) */
645 static const char alt_7
[] =
646 {0x0f,0x1f,0x80,0x00,0x00,0x00,0x00};
647 /* nopl 0L(%[re]ax,%[re]ax,1) */
648 static const char alt_8
[] =
649 {0x0f,0x1f,0x84,0x00,0x00,0x00,0x00,0x00};
650 /* nopw 0L(%[re]ax,%[re]ax,1) */
651 static const char alt_9
[] =
652 {0x66,0x0f,0x1f,0x84,0x00,0x00,0x00,0x00,0x00};
653 /* nopw %cs:0L(%[re]ax,%[re]ax,1) */
654 static const char alt_10
[] =
655 {0x66,0x2e,0x0f,0x1f,0x84,0x00,0x00,0x00,0x00,0x00};
657 nopw %cs:0L(%[re]ax,%[re]ax,1) */
658 static const char alt_long_11
[] =
660 0x66,0x2e,0x0f,0x1f,0x84,0x00,0x00,0x00,0x00,0x00};
663 nopw %cs:0L(%[re]ax,%[re]ax,1) */
664 static const char alt_long_12
[] =
667 0x66,0x2e,0x0f,0x1f,0x84,0x00,0x00,0x00,0x00,0x00};
671 nopw %cs:0L(%[re]ax,%[re]ax,1) */
672 static const char alt_long_13
[] =
676 0x66,0x2e,0x0f,0x1f,0x84,0x00,0x00,0x00,0x00,0x00};
681 nopw %cs:0L(%[re]ax,%[re]ax,1) */
682 static const char alt_long_14
[] =
687 0x66,0x2e,0x0f,0x1f,0x84,0x00,0x00,0x00,0x00,0x00};
693 nopw %cs:0L(%[re]ax,%[re]ax,1) */
694 static const char alt_long_15
[] =
700 0x66,0x2e,0x0f,0x1f,0x84,0x00,0x00,0x00,0x00,0x00};
701 /* nopl 0(%[re]ax,%[re]ax,1)
702 nopw 0(%[re]ax,%[re]ax,1) */
703 static const char alt_short_11
[] =
704 {0x0f,0x1f,0x44,0x00,0x00,
705 0x66,0x0f,0x1f,0x44,0x00,0x00};
706 /* nopw 0(%[re]ax,%[re]ax,1)
707 nopw 0(%[re]ax,%[re]ax,1) */
708 static const char alt_short_12
[] =
709 {0x66,0x0f,0x1f,0x44,0x00,0x00,
710 0x66,0x0f,0x1f,0x44,0x00,0x00};
711 /* nopw 0(%[re]ax,%[re]ax,1)
713 static const char alt_short_13
[] =
714 {0x66,0x0f,0x1f,0x44,0x00,0x00,
715 0x0f,0x1f,0x80,0x00,0x00,0x00,0x00};
718 static const char alt_short_14
[] =
719 {0x0f,0x1f,0x80,0x00,0x00,0x00,0x00,
720 0x0f,0x1f,0x80,0x00,0x00,0x00,0x00};
722 nopl 0L(%[re]ax,%[re]ax,1) */
723 static const char alt_short_15
[] =
724 {0x0f,0x1f,0x80,0x00,0x00,0x00,0x00,
725 0x0f,0x1f,0x84,0x00,0x00,0x00,0x00,0x00};
726 static const char *const alt_short_patt
[] = {
727 f32_1
, f32_2
, alt_3
, alt_4
, alt_5
, alt_6
, alt_7
, alt_8
,
728 alt_9
, alt_10
, alt_short_11
, alt_short_12
, alt_short_13
,
729 alt_short_14
, alt_short_15
731 static const char *const alt_long_patt
[] = {
732 f32_1
, f32_2
, alt_3
, alt_4
, alt_5
, alt_6
, alt_7
, alt_8
,
733 alt_9
, alt_10
, alt_long_11
, alt_long_12
, alt_long_13
,
734 alt_long_14
, alt_long_15
737 if (count
<= 0 || count
> 15)
740 /* We need to decide which NOP sequence to use for 32bit and
741 64bit. When -mtune= is used:
743 1. For PROCESSOR_I486, PROCESSOR_PENTIUM and PROCESSOR_GENERIC32,
744 f32_patt will be used.
745 2. For PROCESSOR_K8 and PROCESSOR_AMDFAM10 in 64bit, NOPs with
746 0x66 prefix will be used.
747 3. For PROCESSOR_CORE2, alt_long_patt will be used.
748 4. For PROCESSOR_PENTIUMPRO, PROCESSOR_PENTIUM4, PROCESSOR_NOCONA,
749 PROCESSOR_CORE, PROCESSOR_CORE2, PROCESSOR_K6, PROCESSOR_ATHLON
750 and PROCESSOR_GENERIC64, alt_short_patt will be used.
752 When -mtune= isn't used, alt_short_patt will be used if
753 cpu_arch_isa_flags has Cpu686. Otherwise, f32_patt will be used.
755 When -march= or .arch is used, we can't use anything beyond
756 cpu_arch_isa_flags. */
758 if (flag_code
== CODE_16BIT
)
760 memcpy (fragP
->fr_literal
+ fragP
->fr_fix
,
761 f16_patt
[count
- 1], count
);
763 /* Adjust jump offset. */
764 fragP
->fr_literal
[fragP
->fr_fix
+ 1] = count
- 2;
766 else if (flag_code
== CODE_64BIT
&& cpu_arch_tune
== PROCESSOR_K8
)
769 int nnops
= (count
+ 3) / 4;
770 int len
= count
/ nnops
;
771 int remains
= count
- nnops
* len
;
774 /* The recommended way to pad 64bit code is to use NOPs preceded
775 by maximally four 0x66 prefixes. Balance the size of nops. */
776 for (i
= 0; i
< remains
; i
++)
778 memset (fragP
->fr_literal
+ fragP
->fr_fix
+ pos
, 0x66, len
);
779 fragP
->fr_literal
[fragP
->fr_fix
+ pos
+ len
] = 0x90;
782 for (; i
< nnops
; i
++)
784 memset (fragP
->fr_literal
+ fragP
->fr_fix
+ pos
, 0x66, len
- 1);
785 fragP
->fr_literal
[fragP
->fr_fix
+ pos
+ len
- 1] = 0x90;
791 const char *const *patt
= NULL
;
793 if (cpu_arch_isa
== PROCESSOR_UNKNOWN
)
795 /* PROCESSOR_UNKNOWN means that all ISAs may be used. */
796 switch (cpu_arch_tune
)
798 case PROCESSOR_UNKNOWN
:
799 /* We use cpu_arch_isa_flags to check if we SHOULD
800 optimize for Cpu686. */
801 if ((cpu_arch_isa_flags
& Cpu686
) != 0)
802 patt
= alt_short_patt
;
806 case PROCESSOR_CORE2
:
807 patt
= alt_long_patt
;
809 case PROCESSOR_PENTIUMPRO
:
810 case PROCESSOR_PENTIUM4
:
811 case PROCESSOR_NOCONA
:
814 case PROCESSOR_ATHLON
:
816 case PROCESSOR_GENERIC64
:
817 case PROCESSOR_AMDFAM10
:
818 patt
= alt_short_patt
;
821 case PROCESSOR_PENTIUM
:
822 case PROCESSOR_GENERIC32
:
829 switch (cpu_arch_tune
)
831 case PROCESSOR_UNKNOWN
:
832 /* When cpu_arch_isa is net, cpu_arch_tune shouldn't be
833 PROCESSOR_UNKNOWN. */
838 case PROCESSOR_PENTIUM
:
839 case PROCESSOR_PENTIUMPRO
:
840 case PROCESSOR_PENTIUM4
:
841 case PROCESSOR_NOCONA
:
844 case PROCESSOR_ATHLON
:
846 case PROCESSOR_AMDFAM10
:
847 case PROCESSOR_GENERIC32
:
848 /* We use cpu_arch_isa_flags to check if we CAN optimize
850 if ((cpu_arch_isa_flags
& Cpu686
) != 0)
851 patt
= alt_short_patt
;
855 case PROCESSOR_CORE2
:
856 if ((cpu_arch_isa_flags
& Cpu686
) != 0)
857 patt
= alt_long_patt
;
861 case PROCESSOR_GENERIC64
:
862 patt
= alt_short_patt
;
867 memcpy (fragP
->fr_literal
+ fragP
->fr_fix
,
868 patt
[count
- 1], count
);
870 fragP
->fr_var
= count
;
873 static INLINE
unsigned int
874 mode_from_disp_size (unsigned int t
)
876 return (t
& Disp8
) ? 1 : (t
& (Disp16
| Disp32
| Disp32S
)) ? 2 : 0;
880 fits_in_signed_byte (offsetT num
)
882 return (num
>= -128) && (num
<= 127);
886 fits_in_unsigned_byte (offsetT num
)
888 return (num
& 0xff) == num
;
892 fits_in_unsigned_word (offsetT num
)
894 return (num
& 0xffff) == num
;
898 fits_in_signed_word (offsetT num
)
900 return (-32768 <= num
) && (num
<= 32767);
904 fits_in_signed_long (offsetT num ATTRIBUTE_UNUSED
)
909 return (!(((offsetT
) -1 << 31) & num
)
910 || (((offsetT
) -1 << 31) & num
) == ((offsetT
) -1 << 31));
912 } /* fits_in_signed_long() */
915 fits_in_unsigned_long (offsetT num ATTRIBUTE_UNUSED
)
920 return (num
& (((offsetT
) 2 << 31) - 1)) == num
;
922 } /* fits_in_unsigned_long() */
925 smallest_imm_type (offsetT num
)
927 if (cpu_arch_flags
!= (Cpu186
| Cpu286
| Cpu386
| Cpu486
| CpuNo64
))
929 /* This code is disabled on the 486 because all the Imm1 forms
930 in the opcode table are slower on the i486. They're the
931 versions with the implicitly specified single-position
932 displacement, which has another syntax if you really want to
935 return Imm1
| Imm8
| Imm8S
| Imm16
| Imm32
| Imm32S
| Imm64
;
937 return (fits_in_signed_byte (num
)
938 ? (Imm8S
| Imm8
| Imm16
| Imm32
| Imm32S
| Imm64
)
939 : fits_in_unsigned_byte (num
)
940 ? (Imm8
| Imm16
| Imm32
| Imm32S
| Imm64
)
941 : (fits_in_signed_word (num
) || fits_in_unsigned_word (num
))
942 ? (Imm16
| Imm32
| Imm32S
| Imm64
)
943 : fits_in_signed_long (num
)
944 ? (Imm32
| Imm32S
| Imm64
)
945 : fits_in_unsigned_long (num
)
951 offset_in_range (offsetT val
, int size
)
957 case 1: mask
= ((addressT
) 1 << 8) - 1; break;
958 case 2: mask
= ((addressT
) 1 << 16) - 1; break;
959 case 4: mask
= ((addressT
) 2 << 31) - 1; break;
961 case 8: mask
= ((addressT
) 2 << 63) - 1; break;
966 /* If BFD64, sign extend val. */
967 if (!use_rela_relocations
)
968 if ((val
& ~(((addressT
) 2 << 31) - 1)) == 0)
969 val
= (val
^ ((addressT
) 1 << 31)) - ((addressT
) 1 << 31);
971 if ((val
& ~mask
) != 0 && (val
& ~mask
) != ~mask
)
973 char buf1
[40], buf2
[40];
975 sprint_value (buf1
, val
);
976 sprint_value (buf2
, val
& mask
);
977 as_warn (_("%s shortened to %s"), buf1
, buf2
);
982 /* Returns 0 if attempting to add a prefix where one from the same
983 class already exists, 1 if non rep/repne added, 2 if rep/repne
986 add_prefix (unsigned int prefix
)
991 if (prefix
>= REX_OPCODE
&& prefix
< REX_OPCODE
+ 16
992 && flag_code
== CODE_64BIT
)
994 if ((i
.prefix
[REX_PREFIX
] & prefix
& REX_MODE64
)
995 || ((i
.prefix
[REX_PREFIX
] & (REX_EXTX
| REX_EXTY
| REX_EXTZ
))
996 && (prefix
& (REX_EXTX
| REX_EXTY
| REX_EXTZ
))))
1007 case CS_PREFIX_OPCODE
:
1008 case DS_PREFIX_OPCODE
:
1009 case ES_PREFIX_OPCODE
:
1010 case FS_PREFIX_OPCODE
:
1011 case GS_PREFIX_OPCODE
:
1012 case SS_PREFIX_OPCODE
:
1016 case REPNE_PREFIX_OPCODE
:
1017 case REPE_PREFIX_OPCODE
:
1020 case LOCK_PREFIX_OPCODE
:
1028 case ADDR_PREFIX_OPCODE
:
1032 case DATA_PREFIX_OPCODE
:
1036 if (i
.prefix
[q
] != 0)
1044 i
.prefix
[q
] |= prefix
;
1047 as_bad (_("same type of prefix used twice"));
1053 set_code_flag (int value
)
1056 cpu_arch_flags
&= ~(Cpu64
| CpuNo64
);
1057 cpu_arch_flags
|= (flag_code
== CODE_64BIT
? Cpu64
: CpuNo64
);
1058 if (value
== CODE_64BIT
&& !(cpu_arch_flags
& CpuSledgehammer
))
1060 as_bad (_("64bit mode not supported on this CPU."));
1062 if (value
== CODE_32BIT
&& !(cpu_arch_flags
& Cpu386
))
1064 as_bad (_("32bit mode not supported on this CPU."));
1066 stackop_size
= '\0';
1070 set_16bit_gcc_code_flag (int new_code_flag
)
1072 flag_code
= new_code_flag
;
1073 cpu_arch_flags
&= ~(Cpu64
| CpuNo64
);
1074 cpu_arch_flags
|= (flag_code
== CODE_64BIT
? Cpu64
: CpuNo64
);
1075 stackop_size
= LONG_MNEM_SUFFIX
;
1079 set_intel_syntax (int syntax_flag
)
1081 /* Find out if register prefixing is specified. */
1082 int ask_naked_reg
= 0;
1085 if (!is_end_of_line
[(unsigned char) *input_line_pointer
])
1087 char *string
= input_line_pointer
;
1088 int e
= get_symbol_end ();
1090 if (strcmp (string
, "prefix") == 0)
1092 else if (strcmp (string
, "noprefix") == 0)
1095 as_bad (_("bad argument to syntax directive."));
1096 *input_line_pointer
= e
;
1098 demand_empty_rest_of_line ();
1100 intel_syntax
= syntax_flag
;
1102 if (ask_naked_reg
== 0)
1103 allow_naked_reg
= (intel_syntax
1104 && (bfd_get_symbol_leading_char (stdoutput
) != '\0'));
1106 allow_naked_reg
= (ask_naked_reg
< 0);
1108 identifier_chars
['%'] = intel_syntax
&& allow_naked_reg
? '%' : 0;
1109 identifier_chars
['$'] = intel_syntax
? '$' : 0;
1110 register_prefix
= allow_naked_reg
? "" : "%";
1114 set_cpu_arch (int dummy ATTRIBUTE_UNUSED
)
1118 if (!is_end_of_line
[(unsigned char) *input_line_pointer
])
1120 char *string
= input_line_pointer
;
1121 int e
= get_symbol_end ();
1124 for (i
= 0; i
< ARRAY_SIZE (cpu_arch
); i
++)
1126 if (strcmp (string
, cpu_arch
[i
].name
) == 0)
1130 cpu_arch_name
= cpu_arch
[i
].name
;
1131 cpu_sub_arch_name
= NULL
;
1132 cpu_arch_flags
= (cpu_arch
[i
].flags
1133 | (flag_code
== CODE_64BIT
1134 ? Cpu64
: CpuNo64
));
1135 cpu_arch_isa
= cpu_arch
[i
].type
;
1136 cpu_arch_isa_flags
= cpu_arch
[i
].flags
;
1137 if (!cpu_arch_tune_set
)
1139 cpu_arch_tune
= cpu_arch_isa
;
1140 cpu_arch_tune_flags
= cpu_arch_isa_flags
;
1144 if ((cpu_arch_flags
| cpu_arch
[i
].flags
) != cpu_arch_flags
)
1146 cpu_sub_arch_name
= cpu_arch
[i
].name
;
1147 cpu_arch_flags
|= cpu_arch
[i
].flags
;
1149 *input_line_pointer
= e
;
1150 demand_empty_rest_of_line ();
1154 if (i
>= ARRAY_SIZE (cpu_arch
))
1155 as_bad (_("no such architecture: `%s'"), string
);
1157 *input_line_pointer
= e
;
1160 as_bad (_("missing cpu architecture"));
1162 no_cond_jump_promotion
= 0;
1163 if (*input_line_pointer
== ','
1164 && !is_end_of_line
[(unsigned char) input_line_pointer
[1]])
1166 char *string
= ++input_line_pointer
;
1167 int e
= get_symbol_end ();
1169 if (strcmp (string
, "nojumps") == 0)
1170 no_cond_jump_promotion
= 1;
1171 else if (strcmp (string
, "jumps") == 0)
1174 as_bad (_("no such architecture modifier: `%s'"), string
);
1176 *input_line_pointer
= e
;
1179 demand_empty_rest_of_line ();
1185 if (!strcmp (default_arch
, "x86_64"))
1186 return bfd_mach_x86_64
;
1187 else if (!strcmp (default_arch
, "i386"))
1188 return bfd_mach_i386_i386
;
1190 as_fatal (_("Unknown architecture"));
1196 const char *hash_err
;
1198 /* Initialize op_hash hash table. */
1199 op_hash
= hash_new ();
1202 const template *optab
;
1203 templates
*core_optab
;
1205 /* Setup for loop. */
1207 core_optab
= (templates
*) xmalloc (sizeof (templates
));
1208 core_optab
->start
= optab
;
1213 if (optab
->name
== NULL
1214 || strcmp (optab
->name
, (optab
- 1)->name
) != 0)
1216 /* different name --> ship out current template list;
1217 add to hash table; & begin anew. */
1218 core_optab
->end
= optab
;
1219 hash_err
= hash_insert (op_hash
,
1224 as_fatal (_("Internal Error: Can't hash %s: %s"),
1228 if (optab
->name
== NULL
)
1230 core_optab
= (templates
*) xmalloc (sizeof (templates
));
1231 core_optab
->start
= optab
;
1236 /* Initialize reg_hash hash table. */
1237 reg_hash
= hash_new ();
1239 const reg_entry
*regtab
;
1240 unsigned int regtab_size
= i386_regtab_size
;
1242 for (regtab
= i386_regtab
; regtab_size
--; regtab
++)
1244 hash_err
= hash_insert (reg_hash
, regtab
->reg_name
, (PTR
) regtab
);
1246 as_fatal (_("Internal Error: Can't hash %s: %s"),
1252 /* Fill in lexical tables: mnemonic_chars, operand_chars. */
1257 for (c
= 0; c
< 256; c
++)
1262 mnemonic_chars
[c
] = c
;
1263 register_chars
[c
] = c
;
1264 operand_chars
[c
] = c
;
1266 else if (ISLOWER (c
))
1268 mnemonic_chars
[c
] = c
;
1269 register_chars
[c
] = c
;
1270 operand_chars
[c
] = c
;
1272 else if (ISUPPER (c
))
1274 mnemonic_chars
[c
] = TOLOWER (c
);
1275 register_chars
[c
] = mnemonic_chars
[c
];
1276 operand_chars
[c
] = c
;
1279 if (ISALPHA (c
) || ISDIGIT (c
))
1280 identifier_chars
[c
] = c
;
1283 identifier_chars
[c
] = c
;
1284 operand_chars
[c
] = c
;
1289 identifier_chars
['@'] = '@';
1292 identifier_chars
['?'] = '?';
1293 operand_chars
['?'] = '?';
1295 digit_chars
['-'] = '-';
1296 mnemonic_chars
['-'] = '-';
1297 identifier_chars
['_'] = '_';
1298 identifier_chars
['.'] = '.';
1300 for (p
= operand_special_chars
; *p
!= '\0'; p
++)
1301 operand_chars
[(unsigned char) *p
] = *p
;
1304 #if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
1307 record_alignment (text_section
, 2);
1308 record_alignment (data_section
, 2);
1309 record_alignment (bss_section
, 2);
1313 if (flag_code
== CODE_64BIT
)
1315 x86_dwarf2_return_column
= 16;
1316 x86_cie_data_alignment
= -8;
1320 x86_dwarf2_return_column
= 8;
1321 x86_cie_data_alignment
= -4;
1326 i386_print_statistics (FILE *file
)
1328 hash_print_statistics (file
, "i386 opcode", op_hash
);
1329 hash_print_statistics (file
, "i386 register", reg_hash
);
1334 /* Debugging routines for md_assemble. */
1335 static void pte (template *);
1336 static void pt (unsigned int);
1337 static void pe (expressionS
*);
1338 static void ps (symbolS
*);
1341 pi (char *line
, i386_insn
*x
)
1345 fprintf (stdout
, "%s: template ", line
);
1347 fprintf (stdout
, " address: base %s index %s scale %x\n",
1348 x
->base_reg
? x
->base_reg
->reg_name
: "none",
1349 x
->index_reg
? x
->index_reg
->reg_name
: "none",
1350 x
->log2_scale_factor
);
1351 fprintf (stdout
, " modrm: mode %x reg %x reg/mem %x\n",
1352 x
->rm
.mode
, x
->rm
.reg
, x
->rm
.regmem
);
1353 fprintf (stdout
, " sib: base %x index %x scale %x\n",
1354 x
->sib
.base
, x
->sib
.index
, x
->sib
.scale
);
1355 fprintf (stdout
, " rex: 64bit %x extX %x extY %x extZ %x\n",
1356 (x
->rex
& REX_MODE64
) != 0,
1357 (x
->rex
& REX_EXTX
) != 0,
1358 (x
->rex
& REX_EXTY
) != 0,
1359 (x
->rex
& REX_EXTZ
) != 0);
1360 for (i
= 0; i
< x
->operands
; i
++)
1362 fprintf (stdout
, " #%d: ", i
+ 1);
1364 fprintf (stdout
, "\n");
1366 & (Reg
| SReg2
| SReg3
| Control
| Debug
| Test
| RegMMX
| RegXMM
))
1367 fprintf (stdout
, "%s\n", x
->op
[i
].regs
->reg_name
);
1368 if (x
->types
[i
] & Imm
)
1370 if (x
->types
[i
] & Disp
)
1371 pe (x
->op
[i
].disps
);
1379 fprintf (stdout
, " %d operands ", t
->operands
);
1380 fprintf (stdout
, "opcode %x ", t
->base_opcode
);
1381 if (t
->extension_opcode
!= None
)
1382 fprintf (stdout
, "ext %x ", t
->extension_opcode
);
1383 if (t
->opcode_modifier
& D
)
1384 fprintf (stdout
, "D");
1385 if (t
->opcode_modifier
& W
)
1386 fprintf (stdout
, "W");
1387 fprintf (stdout
, "\n");
1388 for (i
= 0; i
< t
->operands
; i
++)
1390 fprintf (stdout
, " #%d type ", i
+ 1);
1391 pt (t
->operand_types
[i
]);
1392 fprintf (stdout
, "\n");
1399 fprintf (stdout
, " operation %d\n", e
->X_op
);
1400 fprintf (stdout
, " add_number %ld (%lx)\n",
1401 (long) e
->X_add_number
, (long) e
->X_add_number
);
1402 if (e
->X_add_symbol
)
1404 fprintf (stdout
, " add_symbol ");
1405 ps (e
->X_add_symbol
);
1406 fprintf (stdout
, "\n");
1410 fprintf (stdout
, " op_symbol ");
1411 ps (e
->X_op_symbol
);
1412 fprintf (stdout
, "\n");
1419 fprintf (stdout
, "%s type %s%s",
1421 S_IS_EXTERNAL (s
) ? "EXTERNAL " : "",
1422 segment_name (S_GET_SEGMENT (s
)));
1425 static struct type_name
1430 const type_names
[] =
1443 { BaseIndex
, "BaseIndex" },
1447 { Disp32S
, "d32s" },
1449 { InOutPortReg
, "InOutPortReg" },
1450 { ShiftCount
, "ShiftCount" },
1451 { Control
, "control reg" },
1452 { Test
, "test reg" },
1453 { Debug
, "debug reg" },
1454 { FloatReg
, "FReg" },
1455 { FloatAcc
, "FAcc" },
1459 { JumpAbsolute
, "Jump Absolute" },
1470 const struct type_name
*ty
;
1472 for (ty
= type_names
; ty
->mask
; ty
++)
1474 fprintf (stdout
, "%s, ", ty
->tname
);
1478 #endif /* DEBUG386 */
1480 static bfd_reloc_code_real_type
1481 reloc (unsigned int size
,
1484 bfd_reloc_code_real_type other
)
1486 if (other
!= NO_RELOC
)
1488 reloc_howto_type
*reloc
;
1493 case BFD_RELOC_X86_64_GOT32
:
1494 return BFD_RELOC_X86_64_GOT64
;
1496 case BFD_RELOC_X86_64_PLTOFF64
:
1497 return BFD_RELOC_X86_64_PLTOFF64
;
1499 case BFD_RELOC_X86_64_GOTPC32
:
1500 other
= BFD_RELOC_X86_64_GOTPC64
;
1502 case BFD_RELOC_X86_64_GOTPCREL
:
1503 other
= BFD_RELOC_X86_64_GOTPCREL64
;
1505 case BFD_RELOC_X86_64_TPOFF32
:
1506 other
= BFD_RELOC_X86_64_TPOFF64
;
1508 case BFD_RELOC_X86_64_DTPOFF32
:
1509 other
= BFD_RELOC_X86_64_DTPOFF64
;
1515 /* Sign-checking 4-byte relocations in 16-/32-bit code is pointless. */
1516 if (size
== 4 && flag_code
!= CODE_64BIT
)
1519 reloc
= bfd_reloc_type_lookup (stdoutput
, other
);
1521 as_bad (_("unknown relocation (%u)"), other
);
1522 else if (size
!= bfd_get_reloc_size (reloc
))
1523 as_bad (_("%u-byte relocation cannot be applied to %u-byte field"),
1524 bfd_get_reloc_size (reloc
),
1526 else if (pcrel
&& !reloc
->pc_relative
)
1527 as_bad (_("non-pc-relative relocation for pc-relative field"));
1528 else if ((reloc
->complain_on_overflow
== complain_overflow_signed
1530 || (reloc
->complain_on_overflow
== complain_overflow_unsigned
1532 as_bad (_("relocated field and relocation type differ in signedness"));
1541 as_bad (_("there are no unsigned pc-relative relocations"));
1544 case 1: return BFD_RELOC_8_PCREL
;
1545 case 2: return BFD_RELOC_16_PCREL
;
1546 case 4: return BFD_RELOC_32_PCREL
;
1547 case 8: return BFD_RELOC_64_PCREL
;
1549 as_bad (_("cannot do %u byte pc-relative relocation"), size
);
1556 case 4: return BFD_RELOC_X86_64_32S
;
1561 case 1: return BFD_RELOC_8
;
1562 case 2: return BFD_RELOC_16
;
1563 case 4: return BFD_RELOC_32
;
1564 case 8: return BFD_RELOC_64
;
1566 as_bad (_("cannot do %s %u byte relocation"),
1567 sign
> 0 ? "signed" : "unsigned", size
);
1571 return BFD_RELOC_NONE
;
1574 /* Here we decide which fixups can be adjusted to make them relative to
1575 the beginning of the section instead of the symbol. Basically we need
1576 to make sure that the dynamic relocations are done correctly, so in
1577 some cases we force the original symbol to be used. */
1580 tc_i386_fix_adjustable (fixS
*fixP ATTRIBUTE_UNUSED
)
1582 #if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
1586 /* Don't adjust pc-relative references to merge sections in 64-bit
1588 if (use_rela_relocations
1589 && (S_GET_SEGMENT (fixP
->fx_addsy
)->flags
& SEC_MERGE
) != 0
1593 /* The x86_64 GOTPCREL are represented as 32bit PCrel relocations
1594 and changed later by validate_fix. */
1595 if (GOT_symbol
&& fixP
->fx_subsy
== GOT_symbol
1596 && fixP
->fx_r_type
== BFD_RELOC_32_PCREL
)
1599 /* adjust_reloc_syms doesn't know about the GOT. */
1600 if (fixP
->fx_r_type
== BFD_RELOC_386_GOTOFF
1601 || fixP
->fx_r_type
== BFD_RELOC_386_PLT32
1602 || fixP
->fx_r_type
== BFD_RELOC_386_GOT32
1603 || fixP
->fx_r_type
== BFD_RELOC_386_TLS_GD
1604 || fixP
->fx_r_type
== BFD_RELOC_386_TLS_LDM
1605 || fixP
->fx_r_type
== BFD_RELOC_386_TLS_LDO_32
1606 || fixP
->fx_r_type
== BFD_RELOC_386_TLS_IE_32
1607 || fixP
->fx_r_type
== BFD_RELOC_386_TLS_IE
1608 || fixP
->fx_r_type
== BFD_RELOC_386_TLS_GOTIE
1609 || fixP
->fx_r_type
== BFD_RELOC_386_TLS_LE_32
1610 || fixP
->fx_r_type
== BFD_RELOC_386_TLS_LE
1611 || fixP
->fx_r_type
== BFD_RELOC_386_TLS_GOTDESC
1612 || fixP
->fx_r_type
== BFD_RELOC_386_TLS_DESC_CALL
1613 || fixP
->fx_r_type
== BFD_RELOC_X86_64_PLT32
1614 || fixP
->fx_r_type
== BFD_RELOC_X86_64_GOT32
1615 || fixP
->fx_r_type
== BFD_RELOC_X86_64_GOTPCREL
1616 || fixP
->fx_r_type
== BFD_RELOC_X86_64_TLSGD
1617 || fixP
->fx_r_type
== BFD_RELOC_X86_64_TLSLD
1618 || fixP
->fx_r_type
== BFD_RELOC_X86_64_DTPOFF32
1619 || fixP
->fx_r_type
== BFD_RELOC_X86_64_DTPOFF64
1620 || fixP
->fx_r_type
== BFD_RELOC_X86_64_GOTTPOFF
1621 || fixP
->fx_r_type
== BFD_RELOC_X86_64_TPOFF32
1622 || fixP
->fx_r_type
== BFD_RELOC_X86_64_TPOFF64
1623 || fixP
->fx_r_type
== BFD_RELOC_X86_64_GOTOFF64
1624 || fixP
->fx_r_type
== BFD_RELOC_X86_64_GOTPC32_TLSDESC
1625 || fixP
->fx_r_type
== BFD_RELOC_X86_64_TLSDESC_CALL
1626 || fixP
->fx_r_type
== BFD_RELOC_VTABLE_INHERIT
1627 || fixP
->fx_r_type
== BFD_RELOC_VTABLE_ENTRY
)
1634 intel_float_operand (const char *mnemonic
)
1636 /* Note that the value returned is meaningful only for opcodes with (memory)
1637 operands, hence the code here is free to improperly handle opcodes that
1638 have no operands (for better performance and smaller code). */
1640 if (mnemonic
[0] != 'f')
1641 return 0; /* non-math */
1643 switch (mnemonic
[1])
1645 /* fclex, fdecstp, fdisi, femms, feni, fincstp, finit, fsetpm, and
1646 the fs segment override prefix not currently handled because no
1647 call path can make opcodes without operands get here */
1649 return 2 /* integer op */;
1651 if (mnemonic
[2] == 'd' && (mnemonic
[3] == 'c' || mnemonic
[3] == 'e'))
1652 return 3; /* fldcw/fldenv */
1655 if (mnemonic
[2] != 'o' /* fnop */)
1656 return 3; /* non-waiting control op */
1659 if (mnemonic
[2] == 's')
1660 return 3; /* frstor/frstpm */
1663 if (mnemonic
[2] == 'a')
1664 return 3; /* fsave */
1665 if (mnemonic
[2] == 't')
1667 switch (mnemonic
[3])
1669 case 'c': /* fstcw */
1670 case 'd': /* fstdw */
1671 case 'e': /* fstenv */
1672 case 's': /* fsts[gw] */
1678 if (mnemonic
[2] == 'r' || mnemonic
[2] == 's')
1679 return 0; /* fxsave/fxrstor are not really math ops */
1686 /* This is the guts of the machine-dependent assembler. LINE points to a
1687 machine dependent instruction. This function is supposed to emit
1688 the frags/bytes it assembles to. */
1695 char mnemonic
[MAX_MNEM_SIZE
];
1697 /* Initialize globals. */
1698 memset (&i
, '\0', sizeof (i
));
1699 for (j
= 0; j
< MAX_OPERANDS
; j
++)
1700 i
.reloc
[j
] = NO_RELOC
;
1701 memset (disp_expressions
, '\0', sizeof (disp_expressions
));
1702 memset (im_expressions
, '\0', sizeof (im_expressions
));
1703 save_stack_p
= save_stack
;
1705 /* First parse an instruction mnemonic & call i386_operand for the operands.
1706 We assume that the scrubber has arranged it so that line[0] is the valid
1707 start of a (possibly prefixed) mnemonic. */
1709 line
= parse_insn (line
, mnemonic
);
1713 line
= parse_operands (line
, mnemonic
);
1717 /* The order of the immediates should be reversed
1718 for 2 immediates extrq and insertq instructions */
1719 if ((i
.imm_operands
== 2)
1720 && ((strcmp (mnemonic
, "extrq") == 0)
1721 || (strcmp (mnemonic
, "insertq") == 0)))
1723 swap_2_operands (0, 1);
1724 /* "extrq" and insertq" are the only two instructions whose operands
1725 have to be reversed even though they have two immediate operands.
1731 /* Now we've parsed the mnemonic into a set of templates, and have the
1732 operands at hand. */
1734 /* All intel opcodes have reversed operands except for "bound" and
1735 "enter". We also don't reverse intersegment "jmp" and "call"
1736 instructions with 2 immediate operands so that the immediate segment
1737 precedes the offset, as it does when in AT&T mode. */
1740 && (strcmp (mnemonic
, "bound") != 0)
1741 && (strcmp (mnemonic
, "invlpga") != 0)
1742 && !((i
.types
[0] & Imm
) && (i
.types
[1] & Imm
)))
1748 /* Don't optimize displacement for movabs since it only takes 64bit
1751 && (flag_code
!= CODE_64BIT
1752 || strcmp (mnemonic
, "movabs") != 0))
1755 /* Next, we find a template that matches the given insn,
1756 making sure the overlap of the given operands types is consistent
1757 with the template operand types. */
1759 if (!match_template ())
1764 /* Undo SYSV386_COMPAT brokenness when in Intel mode. See i386.h */
1766 && (i
.tm
.base_opcode
& 0xfffffde0) == 0xdce0)
1767 i
.tm
.base_opcode
^= Opcode_FloatR
;
1769 /* Zap movzx and movsx suffix. The suffix may have been set from
1770 "word ptr" or "byte ptr" on the source operand, but we'll use
1771 the suffix later to choose the destination register. */
1772 if ((i
.tm
.base_opcode
& ~9) == 0x0fb6)
1774 if (i
.reg_operands
< 2
1776 && (~i
.tm
.opcode_modifier
1783 as_bad (_("ambiguous operand size for `%s'"), i
.tm
.name
);
1789 if (i
.tm
.opcode_modifier
& FWait
)
1790 if (!add_prefix (FWAIT_OPCODE
))
1793 /* Check string instruction segment overrides. */
1794 if ((i
.tm
.opcode_modifier
& IsString
) != 0 && i
.mem_operands
!= 0)
1796 if (!check_string ())
1800 if (!process_suffix ())
1803 /* Make still unresolved immediate matches conform to size of immediate
1804 given in i.suffix. */
1805 if (!finalize_imm ())
1808 if (i
.types
[0] & Imm1
)
1809 i
.imm_operands
= 0; /* kludge for shift insns. */
1810 if (i
.types
[0] & ImplicitRegister
)
1812 if (i
.types
[1] & ImplicitRegister
)
1814 if (i
.types
[2] & ImplicitRegister
)
1817 if (i
.tm
.opcode_modifier
& ImmExt
)
1821 if ((i
.tm
.cpu_flags
& CpuSSE3
) && i
.operands
> 0)
1823 /* Streaming SIMD extensions 3 Instructions have the fixed
1824 operands with an opcode suffix which is coded in the same
1825 place as an 8-bit immediate field would be. Here we check
1826 those operands and remove them afterwards. */
1829 for (x
= 0; x
< i
.operands
; x
++)
1830 if (i
.op
[x
].regs
->reg_num
!= x
)
1831 as_bad (_("can't use register '%%%s' as operand %d in '%s'."),
1832 i
.op
[x
].regs
->reg_name
, x
+ 1, i
.tm
.name
);
1836 /* These AMD 3DNow! and Intel Katmai New Instructions have an
1837 opcode suffix which is coded in the same place as an 8-bit
1838 immediate field would be. Here we fake an 8-bit immediate
1839 operand from the opcode suffix stored in tm.extension_opcode. */
1841 assert (i
.imm_operands
== 0 && i
.operands
<= 2 && 2 < MAX_OPERANDS
);
1843 exp
= &im_expressions
[i
.imm_operands
++];
1844 i
.op
[i
.operands
].imms
= exp
;
1845 i
.types
[i
.operands
++] = Imm8
;
1846 exp
->X_op
= O_constant
;
1847 exp
->X_add_number
= i
.tm
.extension_opcode
;
1848 i
.tm
.extension_opcode
= None
;
1851 /* For insns with operands there are more diddles to do to the opcode. */
1854 if (!process_operands ())
1857 else if (!quiet_warnings
&& (i
.tm
.opcode_modifier
& Ugh
) != 0)
1859 /* UnixWare fsub no args is alias for fsubp, fadd -> faddp, etc. */
1860 as_warn (_("translating to `%sp'"), i
.tm
.name
);
1863 /* Handle conversion of 'int $3' --> special int3 insn. */
1864 if (i
.tm
.base_opcode
== INT_OPCODE
&& i
.op
[0].imms
->X_add_number
== 3)
1866 i
.tm
.base_opcode
= INT3_OPCODE
;
1870 if ((i
.tm
.opcode_modifier
& (Jump
| JumpByte
| JumpDword
))
1871 && i
.op
[0].disps
->X_op
== O_constant
)
1873 /* Convert "jmp constant" (and "call constant") to a jump (call) to
1874 the absolute address given by the constant. Since ix86 jumps and
1875 calls are pc relative, we need to generate a reloc. */
1876 i
.op
[0].disps
->X_add_symbol
= &abs_symbol
;
1877 i
.op
[0].disps
->X_op
= O_symbol
;
1880 if ((i
.tm
.opcode_modifier
& Rex64
) != 0)
1881 i
.rex
|= REX_MODE64
;
1883 /* For 8 bit registers we need an empty rex prefix. Also if the
1884 instruction already has a prefix, we need to convert old
1885 registers to new ones. */
1887 if (((i
.types
[0] & Reg8
) != 0
1888 && (i
.op
[0].regs
->reg_flags
& RegRex64
) != 0)
1889 || ((i
.types
[1] & Reg8
) != 0
1890 && (i
.op
[1].regs
->reg_flags
& RegRex64
) != 0)
1891 || (((i
.types
[0] & Reg8
) != 0 || (i
.types
[1] & Reg8
) != 0)
1896 i
.rex
|= REX_OPCODE
;
1897 for (x
= 0; x
< 2; x
++)
1899 /* Look for 8 bit operand that uses old registers. */
1900 if ((i
.types
[x
] & Reg8
) != 0
1901 && (i
.op
[x
].regs
->reg_flags
& RegRex64
) == 0)
1903 /* In case it is "hi" register, give up. */
1904 if (i
.op
[x
].regs
->reg_num
> 3)
1905 as_bad (_("can't encode register '%%%s' in an "
1906 "instruction requiring REX prefix."),
1907 i
.op
[x
].regs
->reg_name
);
1909 /* Otherwise it is equivalent to the extended register.
1910 Since the encoding doesn't change this is merely
1911 cosmetic cleanup for debug output. */
1913 i
.op
[x
].regs
= i
.op
[x
].regs
+ 8;
1919 add_prefix (REX_OPCODE
| i
.rex
);
1921 /* We are ready to output the insn. */
1926 parse_insn (char *line
, char *mnemonic
)
1929 char *token_start
= l
;
1934 /* Non-zero if we found a prefix only acceptable with string insns. */
1935 const char *expecting_string_instruction
= NULL
;
1940 while ((*mnem_p
= mnemonic_chars
[(unsigned char) *l
]) != 0)
1943 if (mnem_p
>= mnemonic
+ MAX_MNEM_SIZE
)
1945 as_bad (_("no such instruction: `%s'"), token_start
);
1950 if (!is_space_char (*l
)
1951 && *l
!= END_OF_INSN
1953 || (*l
!= PREFIX_SEPARATOR
1956 as_bad (_("invalid character %s in mnemonic"),
1957 output_invalid (*l
));
1960 if (token_start
== l
)
1962 if (!intel_syntax
&& *l
== PREFIX_SEPARATOR
)
1963 as_bad (_("expecting prefix; got nothing"));
1965 as_bad (_("expecting mnemonic; got nothing"));
1969 /* Look up instruction (or prefix) via hash table. */
1970 current_templates
= hash_find (op_hash
, mnemonic
);
1972 if (*l
!= END_OF_INSN
1973 && (!is_space_char (*l
) || l
[1] != END_OF_INSN
)
1974 && current_templates
1975 && (current_templates
->start
->opcode_modifier
& IsPrefix
))
1977 if (current_templates
->start
->cpu_flags
1978 & (flag_code
!= CODE_64BIT
? Cpu64
: CpuNo64
))
1980 as_bad ((flag_code
!= CODE_64BIT
1981 ? _("`%s' is only supported in 64-bit mode")
1982 : _("`%s' is not supported in 64-bit mode")),
1983 current_templates
->start
->name
);
1986 /* If we are in 16-bit mode, do not allow addr16 or data16.
1987 Similarly, in 32-bit mode, do not allow addr32 or data32. */
1988 if ((current_templates
->start
->opcode_modifier
& (Size16
| Size32
))
1989 && flag_code
!= CODE_64BIT
1990 && (((current_templates
->start
->opcode_modifier
& Size32
) != 0)
1991 ^ (flag_code
== CODE_16BIT
)))
1993 as_bad (_("redundant %s prefix"),
1994 current_templates
->start
->name
);
1997 /* Add prefix, checking for repeated prefixes. */
1998 switch (add_prefix (current_templates
->start
->base_opcode
))
2003 expecting_string_instruction
= current_templates
->start
->name
;
2006 /* Skip past PREFIX_SEPARATOR and reset token_start. */
2013 if (!current_templates
)
2015 /* See if we can get a match by trimming off a suffix. */
2018 case WORD_MNEM_SUFFIX
:
2019 if (intel_syntax
&& (intel_float_operand (mnemonic
) & 2))
2020 i
.suffix
= SHORT_MNEM_SUFFIX
;
2022 case BYTE_MNEM_SUFFIX
:
2023 case QWORD_MNEM_SUFFIX
:
2024 i
.suffix
= mnem_p
[-1];
2026 current_templates
= hash_find (op_hash
, mnemonic
);
2028 case SHORT_MNEM_SUFFIX
:
2029 case LONG_MNEM_SUFFIX
:
2032 i
.suffix
= mnem_p
[-1];
2034 current_templates
= hash_find (op_hash
, mnemonic
);
2042 if (intel_float_operand (mnemonic
) == 1)
2043 i
.suffix
= SHORT_MNEM_SUFFIX
;
2045 i
.suffix
= LONG_MNEM_SUFFIX
;
2047 current_templates
= hash_find (op_hash
, mnemonic
);
2051 if (!current_templates
)
2053 as_bad (_("no such instruction: `%s'"), token_start
);
2058 if (current_templates
->start
->opcode_modifier
& (Jump
| JumpByte
))
2060 /* Check for a branch hint. We allow ",pt" and ",pn" for
2061 predict taken and predict not taken respectively.
2062 I'm not sure that branch hints actually do anything on loop
2063 and jcxz insns (JumpByte) for current Pentium4 chips. They
2064 may work in the future and it doesn't hurt to accept them
2066 if (l
[0] == ',' && l
[1] == 'p')
2070 if (!add_prefix (DS_PREFIX_OPCODE
))
2074 else if (l
[2] == 'n')
2076 if (!add_prefix (CS_PREFIX_OPCODE
))
2082 /* Any other comma loses. */
2085 as_bad (_("invalid character %s in mnemonic"),
2086 output_invalid (*l
));
2090 /* Check if instruction is supported on specified architecture. */
2092 for (t
= current_templates
->start
; t
< current_templates
->end
; ++t
)
2094 if (!((t
->cpu_flags
& ~(Cpu64
| CpuNo64
))
2095 & ~(cpu_arch_flags
& ~(Cpu64
| CpuNo64
))))
2097 if (!(t
->cpu_flags
& (flag_code
== CODE_64BIT
? CpuNo64
: Cpu64
)))
2100 if (!(supported
& 2))
2102 as_bad (flag_code
== CODE_64BIT
2103 ? _("`%s' is not supported in 64-bit mode")
2104 : _("`%s' is only supported in 64-bit mode"),
2105 current_templates
->start
->name
);
2108 if (!(supported
& 1))
2110 as_warn (_("`%s' is not supported on `%s%s'"),
2111 current_templates
->start
->name
,
2113 cpu_sub_arch_name
? cpu_sub_arch_name
: "");
2115 else if ((Cpu386
& ~cpu_arch_flags
) && (flag_code
!= CODE_16BIT
))
2117 as_warn (_("use .code16 to ensure correct addressing mode"));
2120 /* Check for rep/repne without a string instruction. */
2121 if (expecting_string_instruction
)
2123 static templates override
;
2125 for (t
= current_templates
->start
; t
< current_templates
->end
; ++t
)
2126 if (t
->opcode_modifier
& IsString
)
2128 if (t
>= current_templates
->end
)
2130 as_bad (_("expecting string instruction after `%s'"),
2131 expecting_string_instruction
);
2134 for (override
.start
= t
; t
< current_templates
->end
; ++t
)
2135 if (!(t
->opcode_modifier
& IsString
))
2138 current_templates
= &override
;
2145 parse_operands (char *l
, const char *mnemonic
)
2149 /* 1 if operand is pending after ','. */
2150 unsigned int expecting_operand
= 0;
2152 /* Non-zero if operand parens not balanced. */
2153 unsigned int paren_not_balanced
;
2155 while (*l
!= END_OF_INSN
)
2157 /* Skip optional white space before operand. */
2158 if (is_space_char (*l
))
2160 if (!is_operand_char (*l
) && *l
!= END_OF_INSN
)
2162 as_bad (_("invalid character %s before operand %d"),
2163 output_invalid (*l
),
2167 token_start
= l
; /* after white space */
2168 paren_not_balanced
= 0;
2169 while (paren_not_balanced
|| *l
!= ',')
2171 if (*l
== END_OF_INSN
)
2173 if (paren_not_balanced
)
2176 as_bad (_("unbalanced parenthesis in operand %d."),
2179 as_bad (_("unbalanced brackets in operand %d."),
2184 break; /* we are done */
2186 else if (!is_operand_char (*l
) && !is_space_char (*l
))
2188 as_bad (_("invalid character %s in operand %d"),
2189 output_invalid (*l
),
2196 ++paren_not_balanced
;
2198 --paren_not_balanced
;
2203 ++paren_not_balanced
;
2205 --paren_not_balanced
;
2209 if (l
!= token_start
)
2210 { /* Yes, we've read in another operand. */
2211 unsigned int operand_ok
;
2212 this_operand
= i
.operands
++;
2213 if (i
.operands
> MAX_OPERANDS
)
2215 as_bad (_("spurious operands; (%d operands/instruction max)"),
2219 /* Now parse operand adding info to 'i' as we go along. */
2220 END_STRING_AND_SAVE (l
);
2224 i386_intel_operand (token_start
,
2225 intel_float_operand (mnemonic
));
2227 operand_ok
= i386_operand (token_start
);
2229 RESTORE_END_STRING (l
);
2235 if (expecting_operand
)
2237 expecting_operand_after_comma
:
2238 as_bad (_("expecting operand after ','; got nothing"));
2243 as_bad (_("expecting operand before ','; got nothing"));
2248 /* Now *l must be either ',' or END_OF_INSN. */
2251 if (*++l
== END_OF_INSN
)
2253 /* Just skip it, if it's \n complain. */
2254 goto expecting_operand_after_comma
;
2256 expecting_operand
= 1;
2263 swap_2_operands (int xchg1
, int xchg2
)
2265 union i386_op temp_op
;
2266 unsigned int temp_type
;
2267 enum bfd_reloc_code_real temp_reloc
;
2269 temp_type
= i
.types
[xchg2
];
2270 i
.types
[xchg2
] = i
.types
[xchg1
];
2271 i
.types
[xchg1
] = temp_type
;
2272 temp_op
= i
.op
[xchg2
];
2273 i
.op
[xchg2
] = i
.op
[xchg1
];
2274 i
.op
[xchg1
] = temp_op
;
2275 temp_reloc
= i
.reloc
[xchg2
];
2276 i
.reloc
[xchg2
] = i
.reloc
[xchg1
];
2277 i
.reloc
[xchg1
] = temp_reloc
;
2281 swap_operands (void)
2286 swap_2_operands (1, i
.operands
- 2);
2289 swap_2_operands (0, i
.operands
- 1);
2295 if (i
.mem_operands
== 2)
2297 const seg_entry
*temp_seg
;
2298 temp_seg
= i
.seg
[0];
2299 i
.seg
[0] = i
.seg
[1];
2300 i
.seg
[1] = temp_seg
;
2304 /* Try to ensure constant immediates are represented in the smallest
2309 char guess_suffix
= 0;
2313 guess_suffix
= i
.suffix
;
2314 else if (i
.reg_operands
)
2316 /* Figure out a suffix from the last register operand specified.
2317 We can't do this properly yet, ie. excluding InOutPortReg,
2318 but the following works for instructions with immediates.
2319 In any case, we can't set i.suffix yet. */
2320 for (op
= i
.operands
; --op
>= 0;)
2321 if (i
.types
[op
] & Reg
)
2323 if (i
.types
[op
] & Reg8
)
2324 guess_suffix
= BYTE_MNEM_SUFFIX
;
2325 else if (i
.types
[op
] & Reg16
)
2326 guess_suffix
= WORD_MNEM_SUFFIX
;
2327 else if (i
.types
[op
] & Reg32
)
2328 guess_suffix
= LONG_MNEM_SUFFIX
;
2329 else if (i
.types
[op
] & Reg64
)
2330 guess_suffix
= QWORD_MNEM_SUFFIX
;
2334 else if ((flag_code
== CODE_16BIT
) ^ (i
.prefix
[DATA_PREFIX
] != 0))
2335 guess_suffix
= WORD_MNEM_SUFFIX
;
2337 for (op
= i
.operands
; --op
>= 0;)
2338 if (i
.types
[op
] & Imm
)
2340 switch (i
.op
[op
].imms
->X_op
)
2343 /* If a suffix is given, this operand may be shortened. */
2344 switch (guess_suffix
)
2346 case LONG_MNEM_SUFFIX
:
2347 i
.types
[op
] |= Imm32
| Imm64
;
2349 case WORD_MNEM_SUFFIX
:
2350 i
.types
[op
] |= Imm16
| Imm32S
| Imm32
| Imm64
;
2352 case BYTE_MNEM_SUFFIX
:
2353 i
.types
[op
] |= Imm16
| Imm8
| Imm8S
| Imm32S
| Imm32
| Imm64
;
2357 /* If this operand is at most 16 bits, convert it
2358 to a signed 16 bit number before trying to see
2359 whether it will fit in an even smaller size.
2360 This allows a 16-bit operand such as $0xffe0 to
2361 be recognised as within Imm8S range. */
2362 if ((i
.types
[op
] & Imm16
)
2363 && (i
.op
[op
].imms
->X_add_number
& ~(offsetT
) 0xffff) == 0)
2365 i
.op
[op
].imms
->X_add_number
=
2366 (((i
.op
[op
].imms
->X_add_number
& 0xffff) ^ 0x8000) - 0x8000);
2368 if ((i
.types
[op
] & Imm32
)
2369 && ((i
.op
[op
].imms
->X_add_number
& ~(((offsetT
) 2 << 31) - 1))
2372 i
.op
[op
].imms
->X_add_number
= ((i
.op
[op
].imms
->X_add_number
2373 ^ ((offsetT
) 1 << 31))
2374 - ((offsetT
) 1 << 31));
2376 i
.types
[op
] |= smallest_imm_type (i
.op
[op
].imms
->X_add_number
);
2378 /* We must avoid matching of Imm32 templates when 64bit
2379 only immediate is available. */
2380 if (guess_suffix
== QWORD_MNEM_SUFFIX
)
2381 i
.types
[op
] &= ~Imm32
;
2388 /* Symbols and expressions. */
2390 /* Convert symbolic operand to proper sizes for matching, but don't
2391 prevent matching a set of insns that only supports sizes other
2392 than those matching the insn suffix. */
2394 unsigned int mask
, allowed
= 0;
2397 for (t
= current_templates
->start
;
2398 t
< current_templates
->end
;
2400 allowed
|= t
->operand_types
[op
];
2401 switch (guess_suffix
)
2403 case QWORD_MNEM_SUFFIX
:
2404 mask
= Imm64
| Imm32S
;
2406 case LONG_MNEM_SUFFIX
:
2409 case WORD_MNEM_SUFFIX
:
2412 case BYTE_MNEM_SUFFIX
:
2420 i
.types
[op
] &= mask
;
2427 /* Try to use the smallest displacement type too. */
2429 optimize_disp (void)
2433 for (op
= i
.operands
; --op
>= 0;)
2434 if (i
.types
[op
] & Disp
)
2436 if (i
.op
[op
].disps
->X_op
== O_constant
)
2438 offsetT disp
= i
.op
[op
].disps
->X_add_number
;
2440 if ((i
.types
[op
] & Disp16
)
2441 && (disp
& ~(offsetT
) 0xffff) == 0)
2443 /* If this operand is at most 16 bits, convert
2444 to a signed 16 bit number and don't use 64bit
2446 disp
= (((disp
& 0xffff) ^ 0x8000) - 0x8000);
2447 i
.types
[op
] &= ~Disp64
;
2449 if ((i
.types
[op
] & Disp32
)
2450 && (disp
& ~(((offsetT
) 2 << 31) - 1)) == 0)
2452 /* If this operand is at most 32 bits, convert
2453 to a signed 32 bit number and don't use 64bit
2455 disp
&= (((offsetT
) 2 << 31) - 1);
2456 disp
= (disp
^ ((offsetT
) 1 << 31)) - ((addressT
) 1 << 31);
2457 i
.types
[op
] &= ~Disp64
;
2459 if (!disp
&& (i
.types
[op
] & BaseIndex
))
2461 i
.types
[op
] &= ~Disp
;
2465 else if (flag_code
== CODE_64BIT
)
2467 if (fits_in_signed_long (disp
))
2469 i
.types
[op
] &= ~Disp64
;
2470 i
.types
[op
] |= Disp32S
;
2472 if (fits_in_unsigned_long (disp
))
2473 i
.types
[op
] |= Disp32
;
2475 if ((i
.types
[op
] & (Disp32
| Disp32S
| Disp16
))
2476 && fits_in_signed_byte (disp
))
2477 i
.types
[op
] |= Disp8
;
2479 else if (i
.reloc
[op
] == BFD_RELOC_386_TLS_DESC_CALL
2480 || i
.reloc
[op
] == BFD_RELOC_X86_64_TLSDESC_CALL
)
2482 fix_new_exp (frag_now
, frag_more (0) - frag_now
->fr_literal
, 0,
2483 i
.op
[op
].disps
, 0, i
.reloc
[op
]);
2484 i
.types
[op
] &= ~Disp
;
2487 /* We only support 64bit displacement on constants. */
2488 i
.types
[op
] &= ~Disp64
;
2493 match_template (void)
2495 /* Points to template once we've found it. */
2497 unsigned int overlap0
, overlap1
, overlap2
, overlap3
;
2498 unsigned int found_reverse_match
;
2500 unsigned int operand_types
[MAX_OPERANDS
];
2501 int addr_prefix_disp
;
2504 #if MAX_OPERANDS != 4
2505 # error "MAX_OPERANDS must be 4."
2508 #define MATCH(overlap, given, template) \
2509 ((overlap & ~JumpAbsolute) \
2510 && (((given) & (BaseIndex | JumpAbsolute)) \
2511 == ((overlap) & (BaseIndex | JumpAbsolute))))
2513 /* If given types r0 and r1 are registers they must be of the same type
2514 unless the expected operand type register overlap is null.
2515 Note that Acc in a template matches every size of reg. */
2516 #define CONSISTENT_REGISTER_MATCH(m0, g0, t0, m1, g1, t1) \
2517 (((g0) & Reg) == 0 || ((g1) & Reg) == 0 \
2518 || ((g0) & Reg) == ((g1) & Reg) \
2519 || ((((m0) & Acc) ? Reg : (t0)) & (((m1) & Acc) ? Reg : (t1)) & Reg) == 0 )
2525 found_reverse_match
= 0;
2526 for (j
= 0; j
< MAX_OPERANDS
; j
++)
2527 operand_types
[j
] = 0;
2528 addr_prefix_disp
= -1;
2529 suffix_check
= (i
.suffix
== BYTE_MNEM_SUFFIX
2531 : (i
.suffix
== WORD_MNEM_SUFFIX
2533 : (i
.suffix
== SHORT_MNEM_SUFFIX
2535 : (i
.suffix
== LONG_MNEM_SUFFIX
2537 : (i
.suffix
== QWORD_MNEM_SUFFIX
2539 : (i
.suffix
== LONG_DOUBLE_MNEM_SUFFIX
2540 ? No_xSuf
: 0))))));
2542 for (t
= current_templates
->start
; t
< current_templates
->end
; t
++)
2544 addr_prefix_disp
= -1;
2546 /* Must have right number of operands. */
2547 if (i
.operands
!= t
->operands
)
2550 /* Check the suffix, except for some instructions in intel mode. */
2551 if ((t
->opcode_modifier
& suffix_check
)
2553 && (t
->opcode_modifier
& IgnoreSize
)))
2556 for (j
= 0; j
< MAX_OPERANDS
; j
++)
2557 operand_types
[j
] = t
->operand_types
[j
];
2559 /* In general, don't allow 64-bit operands in 32-bit mode. */
2560 if (i
.suffix
== QWORD_MNEM_SUFFIX
2561 && flag_code
!= CODE_64BIT
2563 ? (!(t
->opcode_modifier
& IgnoreSize
)
2564 && !intel_float_operand (t
->name
))
2565 : intel_float_operand (t
->name
) != 2)
2566 && (!(operand_types
[0] & (RegMMX
| RegXMM
))
2567 || !(operand_types
[t
->operands
> 1] & (RegMMX
| RegXMM
)))
2568 && (t
->base_opcode
!= 0x0fc7
2569 || t
->extension_opcode
!= 1 /* cmpxchg8b */))
2572 /* Do not verify operands when there are none. */
2573 else if (!t
->operands
)
2575 if (t
->cpu_flags
& ~cpu_arch_flags
)
2577 /* We've found a match; break out of loop. */
2581 /* Address size prefix will turn Disp64/Disp32/Disp16 operand
2582 into Disp32/Disp16/Disp32 operand. */
2583 if (i
.prefix
[ADDR_PREFIX
] != 0)
2585 unsigned int DispOn
= 0, DispOff
= 0;
2603 for (j
= 0; j
< MAX_OPERANDS
; j
++)
2605 /* There should be only one Disp operand. */
2606 if ((operand_types
[j
] & DispOff
))
2608 addr_prefix_disp
= j
;
2609 operand_types
[j
] |= DispOn
;
2610 operand_types
[j
] &= ~DispOff
;
2616 overlap0
= i
.types
[0] & operand_types
[0];
2617 switch (t
->operands
)
2620 if (!MATCH (overlap0
, i
.types
[0], operand_types
[0]))
2626 overlap1
= i
.types
[1] & operand_types
[1];
2627 if (!MATCH (overlap0
, i
.types
[0], operand_types
[0])
2628 || !MATCH (overlap1
, i
.types
[1], operand_types
[1])
2629 /* monitor in SSE3 is a very special case. The first
2630 register and the second register may have different
2632 || !((t
->base_opcode
== 0x0f01
2633 && t
->extension_opcode
== 0xc8)
2634 || CONSISTENT_REGISTER_MATCH (overlap0
, i
.types
[0],
2636 overlap1
, i
.types
[1],
2639 /* Check if other direction is valid ... */
2640 if ((t
->opcode_modifier
& (D
| FloatD
)) == 0)
2643 /* Try reversing direction of operands. */
2644 overlap0
= i
.types
[0] & operand_types
[1];
2645 overlap1
= i
.types
[1] & operand_types
[0];
2646 if (!MATCH (overlap0
, i
.types
[0], operand_types
[1])
2647 || !MATCH (overlap1
, i
.types
[1], operand_types
[0])
2648 || !CONSISTENT_REGISTER_MATCH (overlap0
, i
.types
[0],
2650 overlap1
, i
.types
[1],
2653 /* Does not match either direction. */
2656 /* found_reverse_match holds which of D or FloatDR
2658 if ((t
->opcode_modifier
& D
))
2659 found_reverse_match
= Opcode_D
;
2660 else if ((t
->opcode_modifier
& FloatD
))
2661 found_reverse_match
= Opcode_FloatD
;
2663 found_reverse_match
= 0;
2664 if ((t
->opcode_modifier
& FloatR
))
2665 found_reverse_match
|= Opcode_FloatR
;
2669 /* Found a forward 2 operand match here. */
2670 switch (t
->operands
)
2673 overlap3
= i
.types
[3] & operand_types
[3];
2675 overlap2
= i
.types
[2] & operand_types
[2];
2679 switch (t
->operands
)
2682 if (!MATCH (overlap3
, i
.types
[3], operand_types
[3])
2683 || !CONSISTENT_REGISTER_MATCH (overlap2
,
2691 /* Here we make use of the fact that there are no
2692 reverse match 3 operand instructions, and all 3
2693 operand instructions only need to be checked for
2694 register consistency between operands 2 and 3. */
2695 if (!MATCH (overlap2
, i
.types
[2], operand_types
[2])
2696 || !CONSISTENT_REGISTER_MATCH (overlap1
,
2706 /* Found either forward/reverse 2, 3 or 4 operand match here:
2707 slip through to break. */
2709 if (t
->cpu_flags
& ~cpu_arch_flags
)
2711 found_reverse_match
= 0;
2714 /* We've found a match; break out of loop. */
2718 if (t
== current_templates
->end
)
2720 /* We found no match. */
2721 as_bad (_("suffix or operands invalid for `%s'"),
2722 current_templates
->start
->name
);
2726 if (!quiet_warnings
)
2729 && ((i
.types
[0] & JumpAbsolute
)
2730 != (operand_types
[0] & JumpAbsolute
)))
2732 as_warn (_("indirect %s without `*'"), t
->name
);
2735 if ((t
->opcode_modifier
& (IsPrefix
| IgnoreSize
))
2736 == (IsPrefix
| IgnoreSize
))
2738 /* Warn them that a data or address size prefix doesn't
2739 affect assembly of the next line of code. */
2740 as_warn (_("stand-alone `%s' prefix"), t
->name
);
2744 /* Copy the template we found. */
2747 if (addr_prefix_disp
!= -1)
2748 i
.tm
.operand_types
[addr_prefix_disp
]
2749 = operand_types
[addr_prefix_disp
];
2751 if (found_reverse_match
)
2753 /* If we found a reverse match we must alter the opcode
2754 direction bit. found_reverse_match holds bits to change
2755 (different for int & float insns). */
2757 i
.tm
.base_opcode
^= found_reverse_match
;
2759 i
.tm
.operand_types
[0] = operand_types
[1];
2760 i
.tm
.operand_types
[1] = operand_types
[0];
2769 int mem_op
= (i
.types
[0] & AnyMem
) ? 0 : 1;
2770 if ((i
.tm
.operand_types
[mem_op
] & EsSeg
) != 0)
2772 if (i
.seg
[0] != NULL
&& i
.seg
[0] != &es
)
2774 as_bad (_("`%s' operand %d must use `%%es' segment"),
2779 /* There's only ever one segment override allowed per instruction.
2780 This instruction possibly has a legal segment override on the
2781 second operand, so copy the segment to where non-string
2782 instructions store it, allowing common code. */
2783 i
.seg
[0] = i
.seg
[1];
2785 else if ((i
.tm
.operand_types
[mem_op
+ 1] & EsSeg
) != 0)
2787 if (i
.seg
[1] != NULL
&& i
.seg
[1] != &es
)
2789 as_bad (_("`%s' operand %d must use `%%es' segment"),
2799 process_suffix (void)
2801 /* If matched instruction specifies an explicit instruction mnemonic
2803 if (i
.tm
.opcode_modifier
& (Size16
| Size32
| Size64
))
2805 if (i
.tm
.opcode_modifier
& Size16
)
2806 i
.suffix
= WORD_MNEM_SUFFIX
;
2807 else if (i
.tm
.opcode_modifier
& Size64
)
2808 i
.suffix
= QWORD_MNEM_SUFFIX
;
2810 i
.suffix
= LONG_MNEM_SUFFIX
;
2812 else if (i
.reg_operands
)
2814 /* If there's no instruction mnemonic suffix we try to invent one
2815 based on register operands. */
2818 /* We take i.suffix from the last register operand specified,
2819 Destination register type is more significant than source
2823 for (op
= i
.operands
; --op
>= 0;)
2824 if ((i
.types
[op
] & Reg
)
2825 && !(i
.tm
.operand_types
[op
] & InOutPortReg
))
2827 i
.suffix
= ((i
.types
[op
] & Reg8
) ? BYTE_MNEM_SUFFIX
:
2828 (i
.types
[op
] & Reg16
) ? WORD_MNEM_SUFFIX
:
2829 (i
.types
[op
] & Reg64
) ? QWORD_MNEM_SUFFIX
:
2834 else if (i
.suffix
== BYTE_MNEM_SUFFIX
)
2836 if (!check_byte_reg ())
2839 else if (i
.suffix
== LONG_MNEM_SUFFIX
)
2841 if (!check_long_reg ())
2844 else if (i
.suffix
== QWORD_MNEM_SUFFIX
)
2846 if (!check_qword_reg ())
2849 else if (i
.suffix
== WORD_MNEM_SUFFIX
)
2851 if (!check_word_reg ())
2854 else if (intel_syntax
&& (i
.tm
.opcode_modifier
& IgnoreSize
))
2855 /* Do nothing if the instruction is going to ignore the prefix. */
2860 else if ((i
.tm
.opcode_modifier
& DefaultSize
)
2862 /* exclude fldenv/frstor/fsave/fstenv */
2863 && (i
.tm
.opcode_modifier
& No_sSuf
))
2865 i
.suffix
= stackop_size
;
2867 else if (intel_syntax
2869 && ((i
.tm
.operand_types
[0] & JumpAbsolute
)
2870 || (i
.tm
.opcode_modifier
& (JumpByte
|JumpInterSegment
))
2871 || (i
.tm
.base_opcode
== 0x0f01 /* [ls][gi]dt */
2872 && i
.tm
.extension_opcode
<= 3)))
2877 if (!(i
.tm
.opcode_modifier
& No_qSuf
))
2879 i
.suffix
= QWORD_MNEM_SUFFIX
;
2883 if (!(i
.tm
.opcode_modifier
& No_lSuf
))
2884 i
.suffix
= LONG_MNEM_SUFFIX
;
2887 if (!(i
.tm
.opcode_modifier
& No_wSuf
))
2888 i
.suffix
= WORD_MNEM_SUFFIX
;
2897 if (i
.tm
.opcode_modifier
& W
)
2899 as_bad (_("no instruction mnemonic suffix given and "
2900 "no register operands; can't size instruction"));
2906 unsigned int suffixes
= (~i
.tm
.opcode_modifier
2914 if ((i
.tm
.opcode_modifier
& W
)
2915 || ((suffixes
& (suffixes
- 1))
2916 && !(i
.tm
.opcode_modifier
& (DefaultSize
| IgnoreSize
))))
2918 as_bad (_("ambiguous operand size for `%s'"), i
.tm
.name
);
2924 /* Change the opcode based on the operand size given by i.suffix;
2925 We don't need to change things for byte insns. */
2927 if (i
.suffix
&& i
.suffix
!= BYTE_MNEM_SUFFIX
)
2929 /* It's not a byte, select word/dword operation. */
2930 if (i
.tm
.opcode_modifier
& W
)
2932 if (i
.tm
.opcode_modifier
& ShortForm
)
2933 i
.tm
.base_opcode
|= 8;
2935 i
.tm
.base_opcode
|= 1;
2938 /* Now select between word & dword operations via the operand
2939 size prefix, except for instructions that will ignore this
2941 if (i
.tm
.base_opcode
== 0x0f01 && i
.tm
.extension_opcode
== 0xc8)
2943 /* monitor in SSE3 is a very special case. The default size
2944 of AX is the size of mode. The address size override
2945 prefix will change the size of AX. */
2946 if (i
.op
->regs
[0].reg_type
&
2947 (flag_code
== CODE_32BIT
? Reg16
: Reg32
))
2948 if (!add_prefix (ADDR_PREFIX_OPCODE
))
2951 else if (i
.suffix
!= QWORD_MNEM_SUFFIX
2952 && i
.suffix
!= LONG_DOUBLE_MNEM_SUFFIX
2953 && !(i
.tm
.opcode_modifier
& (IgnoreSize
| FloatMF
))
2954 && ((i
.suffix
== LONG_MNEM_SUFFIX
) == (flag_code
== CODE_16BIT
)
2955 || (flag_code
== CODE_64BIT
2956 && (i
.tm
.opcode_modifier
& JumpByte
))))
2958 unsigned int prefix
= DATA_PREFIX_OPCODE
;
2960 if (i
.tm
.opcode_modifier
& JumpByte
) /* jcxz, loop */
2961 prefix
= ADDR_PREFIX_OPCODE
;
2963 if (!add_prefix (prefix
))
2967 /* Set mode64 for an operand. */
2968 if (i
.suffix
== QWORD_MNEM_SUFFIX
2969 && flag_code
== CODE_64BIT
2970 && (i
.tm
.opcode_modifier
& NoRex64
) == 0)
2972 /* Special case for xchg %rax,%rax. It is NOP and doesn't
2975 || i
.types
[0] != (Acc
| Reg64
)
2976 || i
.types
[1] != (Acc
| Reg64
)
2977 || strcmp (i
.tm
.name
, "xchg") != 0)
2978 i
.rex
|= REX_MODE64
;
2981 /* Size floating point instruction. */
2982 if (i
.suffix
== LONG_MNEM_SUFFIX
)
2983 if (i
.tm
.opcode_modifier
& FloatMF
)
2984 i
.tm
.base_opcode
^= 4;
2991 check_byte_reg (void)
2995 for (op
= i
.operands
; --op
>= 0;)
2997 /* If this is an eight bit register, it's OK. If it's the 16 or
2998 32 bit version of an eight bit register, we will just use the
2999 low portion, and that's OK too. */
3000 if (i
.types
[op
] & Reg8
)
3003 /* movzx and movsx should not generate this warning. */
3005 && (i
.tm
.base_opcode
== 0xfb7
3006 || i
.tm
.base_opcode
== 0xfb6
3007 || i
.tm
.base_opcode
== 0x63
3008 || i
.tm
.base_opcode
== 0xfbe
3009 || i
.tm
.base_opcode
== 0xfbf))
3012 if ((i
.types
[op
] & WordReg
) && i
.op
[op
].regs
->reg_num
< 4)
3014 /* Prohibit these changes in the 64bit mode, since the
3015 lowering is more complicated. */
3016 if (flag_code
== CODE_64BIT
3017 && (i
.tm
.operand_types
[op
] & InOutPortReg
) == 0)
3019 as_bad (_("Incorrect register `%s%s' used with `%c' suffix"),
3020 register_prefix
, i
.op
[op
].regs
->reg_name
,
3024 #if REGISTER_WARNINGS
3026 && (i
.tm
.operand_types
[op
] & InOutPortReg
) == 0)
3027 as_warn (_("using `%%%s' instead of `%%%s' due to `%c' suffix"),
3028 (i
.op
[op
].regs
+ (i
.types
[op
] & Reg16
3029 ? REGNAM_AL
- REGNAM_AX
3030 : REGNAM_AL
- REGNAM_EAX
))->reg_name
,
3031 i
.op
[op
].regs
->reg_name
,
3036 /* Any other register is bad. */
3037 if (i
.types
[op
] & (Reg
| RegMMX
| RegXMM
3039 | Control
| Debug
| Test
3040 | FloatReg
| FloatAcc
))
3042 as_bad (_("`%%%s' not allowed with `%s%c'"),
3043 i
.op
[op
].regs
->reg_name
,
3053 check_long_reg (void)
3057 for (op
= i
.operands
; --op
>= 0;)
3058 /* Reject eight bit registers, except where the template requires
3059 them. (eg. movzb) */
3060 if ((i
.types
[op
] & Reg8
) != 0
3061 && (i
.tm
.operand_types
[op
] & (Reg16
| Reg32
| Acc
)) != 0)
3063 as_bad (_("`%%%s' not allowed with `%s%c'"),
3064 i
.op
[op
].regs
->reg_name
,
3069 /* Warn if the e prefix on a general reg is missing. */
3070 else if ((!quiet_warnings
|| flag_code
== CODE_64BIT
)
3071 && (i
.types
[op
] & Reg16
) != 0
3072 && (i
.tm
.operand_types
[op
] & (Reg32
| Acc
)) != 0)
3074 /* Prohibit these changes in the 64bit mode, since the
3075 lowering is more complicated. */
3076 if (flag_code
== CODE_64BIT
)
3078 as_bad (_("Incorrect register `%s%s' used with `%c' suffix"),
3079 register_prefix
, i
.op
[op
].regs
->reg_name
,
3083 #if REGISTER_WARNINGS
3085 as_warn (_("using `%%%s' instead of `%%%s' due to `%c' suffix"),
3086 (i
.op
[op
].regs
+ REGNAM_EAX
- REGNAM_AX
)->reg_name
,
3087 i
.op
[op
].regs
->reg_name
,
3091 /* Warn if the r prefix on a general reg is missing. */
3092 else if ((i
.types
[op
] & Reg64
) != 0
3093 && (i
.tm
.operand_types
[op
] & (Reg32
| Acc
)) != 0)
3095 as_bad (_("Incorrect register `%s%s' used with `%c' suffix"),
3096 register_prefix
, i
.op
[op
].regs
->reg_name
,
3104 check_qword_reg (void)
3108 for (op
= i
.operands
; --op
>= 0; )
3109 /* Reject eight bit registers, except where the template requires
3110 them. (eg. movzb) */
3111 if ((i
.types
[op
] & Reg8
) != 0
3112 && (i
.tm
.operand_types
[op
] & (Reg16
| Reg32
| Acc
)) != 0)
3114 as_bad (_("`%%%s' not allowed with `%s%c'"),
3115 i
.op
[op
].regs
->reg_name
,
3120 /* Warn if the e prefix on a general reg is missing. */
3121 else if (((i
.types
[op
] & Reg16
) != 0
3122 || (i
.types
[op
] & Reg32
) != 0)
3123 && (i
.tm
.operand_types
[op
] & (Reg32
| Acc
)) != 0)
3125 /* Prohibit these changes in the 64bit mode, since the
3126 lowering is more complicated. */
3127 as_bad (_("Incorrect register `%s%s' used with `%c' suffix"),
3128 register_prefix
, i
.op
[op
].regs
->reg_name
,
3136 check_word_reg (void)
3139 for (op
= i
.operands
; --op
>= 0;)
3140 /* Reject eight bit registers, except where the template requires
3141 them. (eg. movzb) */
3142 if ((i
.types
[op
] & Reg8
) != 0
3143 && (i
.tm
.operand_types
[op
] & (Reg16
| Reg32
| Acc
)) != 0)
3145 as_bad (_("`%%%s' not allowed with `%s%c'"),
3146 i
.op
[op
].regs
->reg_name
,
3151 /* Warn if the e prefix on a general reg is present. */
3152 else if ((!quiet_warnings
|| flag_code
== CODE_64BIT
)
3153 && (i
.types
[op
] & Reg32
) != 0
3154 && (i
.tm
.operand_types
[op
] & (Reg16
| Acc
)) != 0)
3156 /* Prohibit these changes in the 64bit mode, since the
3157 lowering is more complicated. */
3158 if (flag_code
== CODE_64BIT
)
3160 as_bad (_("Incorrect register `%s%s' used with `%c' suffix"),
3161 register_prefix
, i
.op
[op
].regs
->reg_name
,
3166 #if REGISTER_WARNINGS
3167 as_warn (_("using `%%%s' instead of `%%%s' due to `%c' suffix"),
3168 (i
.op
[op
].regs
+ REGNAM_AX
- REGNAM_EAX
)->reg_name
,
3169 i
.op
[op
].regs
->reg_name
,
3179 unsigned int overlap0
, overlap1
, overlap2
;
3181 overlap0
= i
.types
[0] & i
.tm
.operand_types
[0];
3182 if ((overlap0
& (Imm8
| Imm8S
| Imm16
| Imm32
| Imm32S
| Imm64
))
3183 && overlap0
!= Imm8
&& overlap0
!= Imm8S
3184 && overlap0
!= Imm16
&& overlap0
!= Imm32S
3185 && overlap0
!= Imm32
&& overlap0
!= Imm64
)
3189 overlap0
&= (i
.suffix
== BYTE_MNEM_SUFFIX
3191 : (i
.suffix
== WORD_MNEM_SUFFIX
3193 : (i
.suffix
== QWORD_MNEM_SUFFIX
3197 else if (overlap0
== (Imm16
| Imm32S
| Imm32
)
3198 || overlap0
== (Imm16
| Imm32
)
3199 || overlap0
== (Imm16
| Imm32S
))
3201 overlap0
= ((flag_code
== CODE_16BIT
) ^ (i
.prefix
[DATA_PREFIX
] != 0)
3204 if (overlap0
!= Imm8
&& overlap0
!= Imm8S
3205 && overlap0
!= Imm16
&& overlap0
!= Imm32S
3206 && overlap0
!= Imm32
&& overlap0
!= Imm64
)
3208 as_bad (_("no instruction mnemonic suffix given; "
3209 "can't determine immediate size"));
3213 i
.types
[0] = overlap0
;
3215 overlap1
= i
.types
[1] & i
.tm
.operand_types
[1];
3216 if ((overlap1
& (Imm8
| Imm8S
| Imm16
| Imm32S
| Imm32
| Imm64
))
3217 && overlap1
!= Imm8
&& overlap1
!= Imm8S
3218 && overlap1
!= Imm16
&& overlap1
!= Imm32S
3219 && overlap1
!= Imm32
&& overlap1
!= Imm64
)
3223 overlap1
&= (i
.suffix
== BYTE_MNEM_SUFFIX
3225 : (i
.suffix
== WORD_MNEM_SUFFIX
3227 : (i
.suffix
== QWORD_MNEM_SUFFIX
3231 else if (overlap1
== (Imm16
| Imm32
| Imm32S
)
3232 || overlap1
== (Imm16
| Imm32
)
3233 || overlap1
== (Imm16
| Imm32S
))
3235 overlap1
= ((flag_code
== CODE_16BIT
) ^ (i
.prefix
[DATA_PREFIX
] != 0)
3238 if (overlap1
!= Imm8
&& overlap1
!= Imm8S
3239 && overlap1
!= Imm16
&& overlap1
!= Imm32S
3240 && overlap1
!= Imm32
&& overlap1
!= Imm64
)
3242 as_bad (_("no instruction mnemonic suffix given; "
3243 "can't determine immediate size %x %c"),
3244 overlap1
, i
.suffix
);
3248 i
.types
[1] = overlap1
;
3250 overlap2
= i
.types
[2] & i
.tm
.operand_types
[2];
3251 assert ((overlap2
& Imm
) == 0);
3252 i
.types
[2] = overlap2
;
3258 process_operands (void)
3260 /* Default segment register this instruction will use for memory
3261 accesses. 0 means unknown. This is only for optimizing out
3262 unnecessary segment overrides. */
3263 const seg_entry
*default_seg
= 0;
3265 /* The imul $imm, %reg instruction is converted into
3266 imul $imm, %reg, %reg, and the clr %reg instruction
3267 is converted into xor %reg, %reg. */
3268 if (i
.tm
.opcode_modifier
& regKludge
)
3270 unsigned int first_reg_op
= (i
.types
[0] & Reg
) ? 0 : 1;
3271 /* Pretend we saw the extra register operand. */
3272 assert (i
.reg_operands
== 1
3273 && i
.op
[first_reg_op
+ 1].regs
== 0);
3274 i
.op
[first_reg_op
+ 1].regs
= i
.op
[first_reg_op
].regs
;
3275 i
.types
[first_reg_op
+ 1] = i
.types
[first_reg_op
];
3280 if (i
.tm
.opcode_modifier
& ShortForm
)
3282 if (i
.types
[0] & (SReg2
| SReg3
))
3284 if (i
.tm
.base_opcode
== POP_SEG_SHORT
3285 && i
.op
[0].regs
->reg_num
== 1)
3287 as_bad (_("you can't `pop %%cs'"));
3290 i
.tm
.base_opcode
|= (i
.op
[0].regs
->reg_num
<< 3);
3291 if ((i
.op
[0].regs
->reg_flags
& RegRex
) != 0)
3296 /* The register or float register operand is in operand 0 or 1. */
3297 unsigned int op
= (i
.types
[0] & (Reg
| FloatReg
)) ? 0 : 1;
3298 /* Register goes in low 3 bits of opcode. */
3299 i
.tm
.base_opcode
|= i
.op
[op
].regs
->reg_num
;
3300 if ((i
.op
[op
].regs
->reg_flags
& RegRex
) != 0)
3302 if (!quiet_warnings
&& (i
.tm
.opcode_modifier
& Ugh
) != 0)
3304 /* Warn about some common errors, but press on regardless.
3305 The first case can be generated by gcc (<= 2.8.1). */
3306 if (i
.operands
== 2)
3308 /* Reversed arguments on faddp, fsubp, etc. */
3309 as_warn (_("translating to `%s %%%s,%%%s'"), i
.tm
.name
,
3310 i
.op
[1].regs
->reg_name
,
3311 i
.op
[0].regs
->reg_name
);
3315 /* Extraneous `l' suffix on fp insn. */
3316 as_warn (_("translating to `%s %%%s'"), i
.tm
.name
,
3317 i
.op
[0].regs
->reg_name
);
3322 else if (i
.tm
.opcode_modifier
& Modrm
)
3324 /* The opcode is completed (modulo i.tm.extension_opcode which
3325 must be put into the modrm byte). Now, we make the modrm and
3326 index base bytes based on all the info we've collected. */
3328 default_seg
= build_modrm_byte ();
3330 else if ((i
.tm
.base_opcode
& ~0x3) == MOV_AX_DISP32
)
3334 else if ((i
.tm
.opcode_modifier
& IsString
) != 0)
3336 /* For the string instructions that allow a segment override
3337 on one of their operands, the default segment is ds. */
3341 if ((i
.tm
.base_opcode
== 0x8d /* lea */
3342 || (i
.tm
.cpu_flags
& CpuSVME
))
3343 && i
.seg
[0] && !quiet_warnings
)
3344 as_warn (_("segment override on `%s' is ineffectual"), i
.tm
.name
);
3346 /* If a segment was explicitly specified, and the specified segment
3347 is not the default, use an opcode prefix to select it. If we
3348 never figured out what the default segment is, then default_seg
3349 will be zero at this point, and the specified segment prefix will
3351 if ((i
.seg
[0]) && (i
.seg
[0] != default_seg
))
3353 if (!add_prefix (i
.seg
[0]->seg_prefix
))
3359 static const seg_entry
*
3360 build_modrm_byte (void)
3362 const seg_entry
*default_seg
= 0;
3364 /* i.reg_operands MUST be the number of real register operands;
3365 implicit registers do not count. */
3366 if (i
.reg_operands
== 2)
3368 unsigned int source
, dest
;
3376 /* When there are 3 operands, one of them may be immediate,
3377 which may be the first or the last operand. Otherwise,
3378 the first operand must be shift count register (cl). */
3379 assert (i
.imm_operands
== 1
3380 || (i
.imm_operands
== 0
3381 && (i
.types
[0] & ShiftCount
)));
3382 source
= (i
.types
[0] & (Imm
| ShiftCount
)) ? 1 : 0;
3385 /* When there are 4 operands, the first two must be immediate
3386 operands. The source operand will be the 3rd one. */
3387 assert (i
.imm_operands
== 2
3388 && (i
.types
[0] & Imm
)
3389 && (i
.types
[1] & Imm
));
3399 /* One of the register operands will be encoded in the i.tm.reg
3400 field, the other in the combined i.tm.mode and i.tm.regmem
3401 fields. If no form of this instruction supports a memory
3402 destination operand, then we assume the source operand may
3403 sometimes be a memory operand and so we need to store the
3404 destination in the i.rm.reg field. */
3405 if ((i
.tm
.operand_types
[dest
] & AnyMem
) == 0)
3407 i
.rm
.reg
= i
.op
[dest
].regs
->reg_num
;
3408 i
.rm
.regmem
= i
.op
[source
].regs
->reg_num
;
3409 if ((i
.op
[dest
].regs
->reg_flags
& RegRex
) != 0)
3411 if ((i
.op
[source
].regs
->reg_flags
& RegRex
) != 0)
3416 i
.rm
.reg
= i
.op
[source
].regs
->reg_num
;
3417 i
.rm
.regmem
= i
.op
[dest
].regs
->reg_num
;
3418 if ((i
.op
[dest
].regs
->reg_flags
& RegRex
) != 0)
3420 if ((i
.op
[source
].regs
->reg_flags
& RegRex
) != 0)
3423 if (flag_code
!= CODE_64BIT
&& (i
.rex
& (REX_EXTX
| REX_EXTZ
)))
3425 if (!((i
.types
[0] | i
.types
[1]) & Control
))
3427 i
.rex
&= ~(REX_EXTX
| REX_EXTZ
);
3428 add_prefix (LOCK_PREFIX_OPCODE
);
3432 { /* If it's not 2 reg operands... */
3435 unsigned int fake_zero_displacement
= 0;
3438 for (op
= 0; op
< i
.operands
; op
++)
3439 if ((i
.types
[op
] & AnyMem
))
3441 assert (op
< i
.operands
);
3445 if (i
.base_reg
== 0)
3448 if (!i
.disp_operands
)
3449 fake_zero_displacement
= 1;
3450 if (i
.index_reg
== 0)
3452 /* Operand is just <disp> */
3453 if (flag_code
== CODE_64BIT
)
3455 /* 64bit mode overwrites the 32bit absolute
3456 addressing by RIP relative addressing and
3457 absolute addressing is encoded by one of the
3458 redundant SIB forms. */
3459 i
.rm
.regmem
= ESCAPE_TO_TWO_BYTE_ADDRESSING
;
3460 i
.sib
.base
= NO_BASE_REGISTER
;
3461 i
.sib
.index
= NO_INDEX_REGISTER
;
3462 i
.types
[op
] = ((i
.prefix
[ADDR_PREFIX
] == 0)
3463 ? Disp32S
: Disp32
);
3465 else if ((flag_code
== CODE_16BIT
)
3466 ^ (i
.prefix
[ADDR_PREFIX
] != 0))
3468 i
.rm
.regmem
= NO_BASE_REGISTER_16
;
3469 i
.types
[op
] = Disp16
;
3473 i
.rm
.regmem
= NO_BASE_REGISTER
;
3474 i
.types
[op
] = Disp32
;
3477 else /* !i.base_reg && i.index_reg */
3479 i
.sib
.index
= i
.index_reg
->reg_num
;
3480 i
.sib
.base
= NO_BASE_REGISTER
;
3481 i
.sib
.scale
= i
.log2_scale_factor
;
3482 i
.rm
.regmem
= ESCAPE_TO_TWO_BYTE_ADDRESSING
;
3483 i
.types
[op
] &= ~Disp
;
3484 if (flag_code
!= CODE_64BIT
)
3485 i
.types
[op
] |= Disp32
; /* Must be 32 bit */
3487 i
.types
[op
] |= Disp32S
;
3488 if ((i
.index_reg
->reg_flags
& RegRex
) != 0)
3492 /* RIP addressing for 64bit mode. */
3493 else if (i
.base_reg
->reg_type
== BaseIndex
)
3495 i
.rm
.regmem
= NO_BASE_REGISTER
;
3496 i
.types
[op
] &= ~ Disp
;
3497 i
.types
[op
] |= Disp32S
;
3498 i
.flags
[op
] |= Operand_PCrel
;
3499 if (! i
.disp_operands
)
3500 fake_zero_displacement
= 1;
3502 else if (i
.base_reg
->reg_type
& Reg16
)
3504 switch (i
.base_reg
->reg_num
)
3507 if (i
.index_reg
== 0)
3509 else /* (%bx,%si) -> 0, or (%bx,%di) -> 1 */
3510 i
.rm
.regmem
= i
.index_reg
->reg_num
- 6;
3514 if (i
.index_reg
== 0)
3517 if ((i
.types
[op
] & Disp
) == 0)
3519 /* fake (%bp) into 0(%bp) */
3520 i
.types
[op
] |= Disp8
;
3521 fake_zero_displacement
= 1;
3524 else /* (%bp,%si) -> 2, or (%bp,%di) -> 3 */
3525 i
.rm
.regmem
= i
.index_reg
->reg_num
- 6 + 2;
3527 default: /* (%si) -> 4 or (%di) -> 5 */
3528 i
.rm
.regmem
= i
.base_reg
->reg_num
- 6 + 4;
3530 i
.rm
.mode
= mode_from_disp_size (i
.types
[op
]);
3532 else /* i.base_reg and 32/64 bit mode */
3534 if (flag_code
== CODE_64BIT
3535 && (i
.types
[op
] & Disp
))
3536 i
.types
[op
] = ((i
.types
[op
] & Disp8
)
3537 | (i
.prefix
[ADDR_PREFIX
] == 0
3538 ? Disp32S
: Disp32
));
3540 i
.rm
.regmem
= i
.base_reg
->reg_num
;
3541 if ((i
.base_reg
->reg_flags
& RegRex
) != 0)
3543 i
.sib
.base
= i
.base_reg
->reg_num
;
3544 /* x86-64 ignores REX prefix bit here to avoid decoder
3546 if ((i
.base_reg
->reg_num
& 7) == EBP_REG_NUM
)
3549 if (i
.disp_operands
== 0)
3551 fake_zero_displacement
= 1;
3552 i
.types
[op
] |= Disp8
;
3555 else if (i
.base_reg
->reg_num
== ESP_REG_NUM
)
3559 i
.sib
.scale
= i
.log2_scale_factor
;
3560 if (i
.index_reg
== 0)
3562 /* <disp>(%esp) becomes two byte modrm with no index
3563 register. We've already stored the code for esp
3564 in i.rm.regmem ie. ESCAPE_TO_TWO_BYTE_ADDRESSING.
3565 Any base register besides %esp will not use the
3566 extra modrm byte. */
3567 i
.sib
.index
= NO_INDEX_REGISTER
;
3568 #if !SCALE1_WHEN_NO_INDEX
3569 /* Another case where we force the second modrm byte. */
3570 if (i
.log2_scale_factor
)
3571 i
.rm
.regmem
= ESCAPE_TO_TWO_BYTE_ADDRESSING
;
3576 i
.sib
.index
= i
.index_reg
->reg_num
;
3577 i
.rm
.regmem
= ESCAPE_TO_TWO_BYTE_ADDRESSING
;
3578 if ((i
.index_reg
->reg_flags
& RegRex
) != 0)
3583 && (i
.reloc
[op
] == BFD_RELOC_386_TLS_DESC_CALL
3584 || i
.reloc
[op
] == BFD_RELOC_X86_64_TLSDESC_CALL
))
3587 i
.rm
.mode
= mode_from_disp_size (i
.types
[op
]);
3590 if (fake_zero_displacement
)
3592 /* Fakes a zero displacement assuming that i.types[op]
3593 holds the correct displacement size. */
3596 assert (i
.op
[op
].disps
== 0);
3597 exp
= &disp_expressions
[i
.disp_operands
++];
3598 i
.op
[op
].disps
= exp
;
3599 exp
->X_op
= O_constant
;
3600 exp
->X_add_number
= 0;
3601 exp
->X_add_symbol
= (symbolS
*) 0;
3602 exp
->X_op_symbol
= (symbolS
*) 0;
3606 /* Fill in i.rm.reg or i.rm.regmem field with register operand
3607 (if any) based on i.tm.extension_opcode. Again, we must be
3608 careful to make sure that segment/control/debug/test/MMX
3609 registers are coded into the i.rm.reg field. */
3614 for (op
= 0; op
< i
.operands
; op
++)
3615 if ((i
.types
[op
] & (Reg
| RegMMX
| RegXMM
3617 | Control
| Debug
| Test
)))
3619 assert (op
< i
.operands
);
3621 /* If there is an extension opcode to put here, the register
3622 number must be put into the regmem field. */
3623 if (i
.tm
.extension_opcode
!= None
)
3625 i
.rm
.regmem
= i
.op
[op
].regs
->reg_num
;
3626 if ((i
.op
[op
].regs
->reg_flags
& RegRex
) != 0)
3631 i
.rm
.reg
= i
.op
[op
].regs
->reg_num
;
3632 if ((i
.op
[op
].regs
->reg_flags
& RegRex
) != 0)
3636 /* Now, if no memory operand has set i.rm.mode = 0, 1, 2 we
3637 must set it to 3 to indicate this is a register operand
3638 in the regmem field. */
3639 if (!i
.mem_operands
)
3643 /* Fill in i.rm.reg field with extension opcode (if any). */
3644 if (i
.tm
.extension_opcode
!= None
)
3645 i
.rm
.reg
= i
.tm
.extension_opcode
;
3651 output_branch (void)
3656 relax_substateT subtype
;
3661 if (flag_code
== CODE_16BIT
)
3665 if (i
.prefix
[DATA_PREFIX
] != 0)
3671 /* Pentium4 branch hints. */
3672 if (i
.prefix
[SEG_PREFIX
] == CS_PREFIX_OPCODE
/* not taken */
3673 || i
.prefix
[SEG_PREFIX
] == DS_PREFIX_OPCODE
/* taken */)
3678 if (i
.prefix
[REX_PREFIX
] != 0)
3684 if (i
.prefixes
!= 0 && !intel_syntax
)
3685 as_warn (_("skipping prefixes on this instruction"));
3687 /* It's always a symbol; End frag & setup for relax.
3688 Make sure there is enough room in this frag for the largest
3689 instruction we may generate in md_convert_frag. This is 2
3690 bytes for the opcode and room for the prefix and largest
3692 frag_grow (prefix
+ 2 + 4);
3693 /* Prefix and 1 opcode byte go in fr_fix. */
3694 p
= frag_more (prefix
+ 1);
3695 if (i
.prefix
[DATA_PREFIX
] != 0)
3696 *p
++ = DATA_PREFIX_OPCODE
;
3697 if (i
.prefix
[SEG_PREFIX
] == CS_PREFIX_OPCODE
3698 || i
.prefix
[SEG_PREFIX
] == DS_PREFIX_OPCODE
)
3699 *p
++ = i
.prefix
[SEG_PREFIX
];
3700 if (i
.prefix
[REX_PREFIX
] != 0)
3701 *p
++ = i
.prefix
[REX_PREFIX
];
3702 *p
= i
.tm
.base_opcode
;
3704 if ((unsigned char) *p
== JUMP_PC_RELATIVE
)
3705 subtype
= ENCODE_RELAX_STATE (UNCOND_JUMP
, SMALL
);
3706 else if ((cpu_arch_flags
& Cpu386
) != 0)
3707 subtype
= ENCODE_RELAX_STATE (COND_JUMP
, SMALL
);
3709 subtype
= ENCODE_RELAX_STATE (COND_JUMP86
, SMALL
);
3712 sym
= i
.op
[0].disps
->X_add_symbol
;
3713 off
= i
.op
[0].disps
->X_add_number
;
3715 if (i
.op
[0].disps
->X_op
!= O_constant
3716 && i
.op
[0].disps
->X_op
!= O_symbol
)
3718 /* Handle complex expressions. */
3719 sym
= make_expr_symbol (i
.op
[0].disps
);
3723 /* 1 possible extra opcode + 4 byte displacement go in var part.
3724 Pass reloc in fr_var. */
3725 frag_var (rs_machine_dependent
, 5, i
.reloc
[0], subtype
, sym
, off
, p
);
3735 if (i
.tm
.opcode_modifier
& JumpByte
)
3737 /* This is a loop or jecxz type instruction. */
3739 if (i
.prefix
[ADDR_PREFIX
] != 0)
3741 FRAG_APPEND_1_CHAR (ADDR_PREFIX_OPCODE
);
3744 /* Pentium4 branch hints. */
3745 if (i
.prefix
[SEG_PREFIX
] == CS_PREFIX_OPCODE
/* not taken */
3746 || i
.prefix
[SEG_PREFIX
] == DS_PREFIX_OPCODE
/* taken */)
3748 FRAG_APPEND_1_CHAR (i
.prefix
[SEG_PREFIX
]);
3757 if (flag_code
== CODE_16BIT
)
3760 if (i
.prefix
[DATA_PREFIX
] != 0)
3762 FRAG_APPEND_1_CHAR (DATA_PREFIX_OPCODE
);
3772 if (i
.prefix
[REX_PREFIX
] != 0)
3774 FRAG_APPEND_1_CHAR (i
.prefix
[REX_PREFIX
]);
3778 if (i
.prefixes
!= 0 && !intel_syntax
)
3779 as_warn (_("skipping prefixes on this instruction"));
3781 p
= frag_more (1 + size
);
3782 *p
++ = i
.tm
.base_opcode
;
3784 fixP
= fix_new_exp (frag_now
, p
- frag_now
->fr_literal
, size
,
3785 i
.op
[0].disps
, 1, reloc (size
, 1, 1, i
.reloc
[0]));
3787 /* All jumps handled here are signed, but don't use a signed limit
3788 check for 32 and 16 bit jumps as we want to allow wrap around at
3789 4G and 64k respectively. */
3791 fixP
->fx_signed
= 1;
3795 output_interseg_jump (void)
3803 if (flag_code
== CODE_16BIT
)
3807 if (i
.prefix
[DATA_PREFIX
] != 0)
3813 if (i
.prefix
[REX_PREFIX
] != 0)
3823 if (i
.prefixes
!= 0 && !intel_syntax
)
3824 as_warn (_("skipping prefixes on this instruction"));
3826 /* 1 opcode; 2 segment; offset */
3827 p
= frag_more (prefix
+ 1 + 2 + size
);
3829 if (i
.prefix
[DATA_PREFIX
] != 0)
3830 *p
++ = DATA_PREFIX_OPCODE
;
3832 if (i
.prefix
[REX_PREFIX
] != 0)
3833 *p
++ = i
.prefix
[REX_PREFIX
];
3835 *p
++ = i
.tm
.base_opcode
;
3836 if (i
.op
[1].imms
->X_op
== O_constant
)
3838 offsetT n
= i
.op
[1].imms
->X_add_number
;
3841 && !fits_in_unsigned_word (n
)
3842 && !fits_in_signed_word (n
))
3844 as_bad (_("16-bit jump out of range"));
3847 md_number_to_chars (p
, n
, size
);
3850 fix_new_exp (frag_now
, p
- frag_now
->fr_literal
, size
,
3851 i
.op
[1].imms
, 0, reloc (size
, 0, 0, i
.reloc
[1]));
3852 if (i
.op
[0].imms
->X_op
!= O_constant
)
3853 as_bad (_("can't handle non absolute segment in `%s'"),
3855 md_number_to_chars (p
+ size
, (valueT
) i
.op
[0].imms
->X_add_number
, 2);
3861 fragS
*insn_start_frag
;
3862 offsetT insn_start_off
;
3864 /* Tie dwarf2 debug info to the address at the start of the insn.
3865 We can't do this after the insn has been output as the current
3866 frag may have been closed off. eg. by frag_var. */
3867 dwarf2_emit_insn (0);
3869 insn_start_frag
= frag_now
;
3870 insn_start_off
= frag_now_fix ();
3873 if (i
.tm
.opcode_modifier
& Jump
)
3875 else if (i
.tm
.opcode_modifier
& (JumpByte
| JumpDword
))
3877 else if (i
.tm
.opcode_modifier
& JumpInterSegment
)
3878 output_interseg_jump ();
3881 /* Output normal instructions here. */
3884 unsigned int prefix
;
3886 /* All opcodes on i386 have either 1 or 2 bytes. Supplemental
3887 Streaming SIMD extensions 3 Instructions have 3 bytes. We may
3888 use one more higher byte to specify a prefix the instruction
3890 if ((i
.tm
.cpu_flags
& CpuSSSE3
) != 0)
3892 if (i
.tm
.base_opcode
& 0xff000000)
3894 prefix
= (i
.tm
.base_opcode
>> 24) & 0xff;
3898 else if ((i
.tm
.base_opcode
& 0xff0000) != 0)
3900 prefix
= (i
.tm
.base_opcode
>> 16) & 0xff;
3901 if ((i
.tm
.cpu_flags
& CpuPadLock
) != 0)
3904 if (prefix
!= REPE_PREFIX_OPCODE
3905 || i
.prefix
[LOCKREP_PREFIX
] != REPE_PREFIX_OPCODE
)
3906 add_prefix (prefix
);
3909 add_prefix (prefix
);
3912 /* The prefix bytes. */
3914 q
< i
.prefix
+ sizeof (i
.prefix
) / sizeof (i
.prefix
[0]);
3920 md_number_to_chars (p
, (valueT
) *q
, 1);
3924 /* Now the opcode; be careful about word order here! */
3925 if (fits_in_unsigned_byte (i
.tm
.base_opcode
))
3927 FRAG_APPEND_1_CHAR (i
.tm
.base_opcode
);
3931 if ((i
.tm
.cpu_flags
& CpuSSSE3
) != 0)
3934 *p
++ = (i
.tm
.base_opcode
>> 16) & 0xff;
3939 /* Put out high byte first: can't use md_number_to_chars! */
3940 *p
++ = (i
.tm
.base_opcode
>> 8) & 0xff;
3941 *p
= i
.tm
.base_opcode
& 0xff;
3944 /* Now the modrm byte and sib byte (if present). */
3945 if (i
.tm
.opcode_modifier
& Modrm
)
3948 md_number_to_chars (p
,
3949 (valueT
) (i
.rm
.regmem
<< 0
3953 /* If i.rm.regmem == ESP (4)
3954 && i.rm.mode != (Register mode)
3956 ==> need second modrm byte. */
3957 if (i
.rm
.regmem
== ESCAPE_TO_TWO_BYTE_ADDRESSING
3959 && !(i
.base_reg
&& (i
.base_reg
->reg_type
& Reg16
) != 0))
3962 md_number_to_chars (p
,
3963 (valueT
) (i
.sib
.base
<< 0
3965 | i
.sib
.scale
<< 6),
3970 if (i
.disp_operands
)
3971 output_disp (insn_start_frag
, insn_start_off
);
3974 output_imm (insn_start_frag
, insn_start_off
);
3980 pi ("" /*line*/, &i
);
3982 #endif /* DEBUG386 */
3986 output_disp (fragS
*insn_start_frag
, offsetT insn_start_off
)
3991 for (n
= 0; n
< i
.operands
; n
++)
3993 if (i
.types
[n
] & Disp
)
3995 if (i
.op
[n
].disps
->X_op
== O_constant
)
4001 if (i
.types
[n
] & (Disp8
| Disp16
| Disp64
))
4004 if (i
.types
[n
] & Disp8
)
4006 if (i
.types
[n
] & Disp64
)
4009 val
= offset_in_range (i
.op
[n
].disps
->X_add_number
,
4011 p
= frag_more (size
);
4012 md_number_to_chars (p
, val
, size
);
4016 enum bfd_reloc_code_real reloc_type
;
4019 int pcrel
= (i
.flags
[n
] & Operand_PCrel
) != 0;
4021 /* The PC relative address is computed relative
4022 to the instruction boundary, so in case immediate
4023 fields follows, we need to adjust the value. */
4024 if (pcrel
&& i
.imm_operands
)
4029 for (n1
= 0; n1
< i
.operands
; n1
++)
4030 if (i
.types
[n1
] & Imm
)
4032 if (i
.types
[n1
] & (Imm8
| Imm8S
| Imm16
| Imm64
))
4035 if (i
.types
[n1
] & (Imm8
| Imm8S
))
4037 if (i
.types
[n1
] & Imm64
)
4042 /* We should find the immediate. */
4043 if (n1
== i
.operands
)
4045 i
.op
[n
].disps
->X_add_number
-= imm_size
;
4048 if (i
.types
[n
] & Disp32S
)
4051 if (i
.types
[n
] & (Disp16
| Disp64
))
4054 if (i
.types
[n
] & Disp64
)
4058 p
= frag_more (size
);
4059 reloc_type
= reloc (size
, pcrel
, sign
, i
.reloc
[n
]);
4061 && GOT_symbol
== i
.op
[n
].disps
->X_add_symbol
4062 && (((reloc_type
== BFD_RELOC_32
4063 || reloc_type
== BFD_RELOC_X86_64_32S
4064 || (reloc_type
== BFD_RELOC_64
4066 && (i
.op
[n
].disps
->X_op
== O_symbol
4067 || (i
.op
[n
].disps
->X_op
== O_add
4068 && ((symbol_get_value_expression
4069 (i
.op
[n
].disps
->X_op_symbol
)->X_op
)
4071 || reloc_type
== BFD_RELOC_32_PCREL
))
4075 if (insn_start_frag
== frag_now
)
4076 add
= (p
- frag_now
->fr_literal
) - insn_start_off
;
4081 add
= insn_start_frag
->fr_fix
- insn_start_off
;
4082 for (fr
= insn_start_frag
->fr_next
;
4083 fr
&& fr
!= frag_now
; fr
= fr
->fr_next
)
4085 add
+= p
- frag_now
->fr_literal
;
4090 reloc_type
= BFD_RELOC_386_GOTPC
;
4091 i
.op
[n
].imms
->X_add_number
+= add
;
4093 else if (reloc_type
== BFD_RELOC_64
)
4094 reloc_type
= BFD_RELOC_X86_64_GOTPC64
;
4096 /* Don't do the adjustment for x86-64, as there
4097 the pcrel addressing is relative to the _next_
4098 insn, and that is taken care of in other code. */
4099 reloc_type
= BFD_RELOC_X86_64_GOTPC32
;
4101 fix_new_exp (frag_now
, p
- frag_now
->fr_literal
, size
,
4102 i
.op
[n
].disps
, pcrel
, reloc_type
);
4109 output_imm (fragS
*insn_start_frag
, offsetT insn_start_off
)
4114 for (n
= 0; n
< i
.operands
; n
++)
4116 if (i
.types
[n
] & Imm
)
4118 if (i
.op
[n
].imms
->X_op
== O_constant
)
4124 if (i
.types
[n
] & (Imm8
| Imm8S
| Imm16
| Imm64
))
4127 if (i
.types
[n
] & (Imm8
| Imm8S
))
4129 else if (i
.types
[n
] & Imm64
)
4132 val
= offset_in_range (i
.op
[n
].imms
->X_add_number
,
4134 p
= frag_more (size
);
4135 md_number_to_chars (p
, val
, size
);
4139 /* Not absolute_section.
4140 Need a 32-bit fixup (don't support 8bit
4141 non-absolute imms). Try to support other
4143 enum bfd_reloc_code_real reloc_type
;
4147 if ((i
.types
[n
] & (Imm32S
))
4148 && (i
.suffix
== QWORD_MNEM_SUFFIX
4149 || (!i
.suffix
&& (i
.tm
.opcode_modifier
& No_lSuf
))))
4151 if (i
.types
[n
] & (Imm8
| Imm8S
| Imm16
| Imm64
))
4154 if (i
.types
[n
] & (Imm8
| Imm8S
))
4156 if (i
.types
[n
] & Imm64
)
4160 p
= frag_more (size
);
4161 reloc_type
= reloc (size
, 0, sign
, i
.reloc
[n
]);
4163 /* This is tough to explain. We end up with this one if we
4164 * have operands that look like
4165 * "_GLOBAL_OFFSET_TABLE_+[.-.L284]". The goal here is to
4166 * obtain the absolute address of the GOT, and it is strongly
4167 * preferable from a performance point of view to avoid using
4168 * a runtime relocation for this. The actual sequence of
4169 * instructions often look something like:
4174 * addl $_GLOBAL_OFFSET_TABLE_+[.-.L66],%ebx
4176 * The call and pop essentially return the absolute address
4177 * of the label .L66 and store it in %ebx. The linker itself
4178 * will ultimately change the first operand of the addl so
4179 * that %ebx points to the GOT, but to keep things simple, the
4180 * .o file must have this operand set so that it generates not
4181 * the absolute address of .L66, but the absolute address of
4182 * itself. This allows the linker itself simply treat a GOTPC
4183 * relocation as asking for a pcrel offset to the GOT to be
4184 * added in, and the addend of the relocation is stored in the
4185 * operand field for the instruction itself.
4187 * Our job here is to fix the operand so that it would add
4188 * the correct offset so that %ebx would point to itself. The
4189 * thing that is tricky is that .-.L66 will point to the
4190 * beginning of the instruction, so we need to further modify
4191 * the operand so that it will point to itself. There are
4192 * other cases where you have something like:
4194 * .long $_GLOBAL_OFFSET_TABLE_+[.-.L66]
4196 * and here no correction would be required. Internally in
4197 * the assembler we treat operands of this form as not being
4198 * pcrel since the '.' is explicitly mentioned, and I wonder
4199 * whether it would simplify matters to do it this way. Who
4200 * knows. In earlier versions of the PIC patches, the
4201 * pcrel_adjust field was used to store the correction, but
4202 * since the expression is not pcrel, I felt it would be
4203 * confusing to do it this way. */
4205 if ((reloc_type
== BFD_RELOC_32
4206 || reloc_type
== BFD_RELOC_X86_64_32S
4207 || reloc_type
== BFD_RELOC_64
)
4209 && GOT_symbol
== i
.op
[n
].imms
->X_add_symbol
4210 && (i
.op
[n
].imms
->X_op
== O_symbol
4211 || (i
.op
[n
].imms
->X_op
== O_add
4212 && ((symbol_get_value_expression
4213 (i
.op
[n
].imms
->X_op_symbol
)->X_op
)
4218 if (insn_start_frag
== frag_now
)
4219 add
= (p
- frag_now
->fr_literal
) - insn_start_off
;
4224 add
= insn_start_frag
->fr_fix
- insn_start_off
;
4225 for (fr
= insn_start_frag
->fr_next
;
4226 fr
&& fr
!= frag_now
; fr
= fr
->fr_next
)
4228 add
+= p
- frag_now
->fr_literal
;
4232 reloc_type
= BFD_RELOC_386_GOTPC
;
4234 reloc_type
= BFD_RELOC_X86_64_GOTPC32
;
4236 reloc_type
= BFD_RELOC_X86_64_GOTPC64
;
4237 i
.op
[n
].imms
->X_add_number
+= add
;
4239 fix_new_exp (frag_now
, p
- frag_now
->fr_literal
, size
,
4240 i
.op
[n
].imms
, 0, reloc_type
);
4246 /* x86_cons_fix_new is called via the expression parsing code when a
4247 reloc is needed. We use this hook to get the correct .got reloc. */
4248 static enum bfd_reloc_code_real got_reloc
= NO_RELOC
;
4249 static int cons_sign
= -1;
4252 x86_cons_fix_new (fragS
*frag
, unsigned int off
, unsigned int len
,
4255 enum bfd_reloc_code_real r
= reloc (len
, 0, cons_sign
, got_reloc
);
4257 got_reloc
= NO_RELOC
;
4260 if (exp
->X_op
== O_secrel
)
4262 exp
->X_op
= O_symbol
;
4263 r
= BFD_RELOC_32_SECREL
;
4267 fix_new_exp (frag
, off
, len
, exp
, 0, r
);
4270 #if (!defined (OBJ_ELF) && !defined (OBJ_MAYBE_ELF)) || defined (LEX_AT)
4271 # define lex_got(reloc, adjust, types) NULL
4273 /* Parse operands of the form
4274 <symbol>@GOTOFF+<nnn>
4275 and similar .plt or .got references.
4277 If we find one, set up the correct relocation in RELOC and copy the
4278 input string, minus the `@GOTOFF' into a malloc'd buffer for
4279 parsing by the calling routine. Return this buffer, and if ADJUST
4280 is non-null set it to the length of the string we removed from the
4281 input line. Otherwise return NULL. */
4283 lex_got (enum bfd_reloc_code_real
*reloc
,
4285 unsigned int *types
)
4287 /* Some of the relocations depend on the size of what field is to
4288 be relocated. But in our callers i386_immediate and i386_displacement
4289 we don't yet know the operand size (this will be set by insn
4290 matching). Hence we record the word32 relocation here,
4291 and adjust the reloc according to the real size in reloc(). */
4292 static const struct {
4294 const enum bfd_reloc_code_real rel
[2];
4295 const unsigned int types64
;
4298 BFD_RELOC_X86_64_PLTOFF64
},
4300 { "PLT", { BFD_RELOC_386_PLT32
,
4301 BFD_RELOC_X86_64_PLT32
},
4302 Imm32
| Imm32S
| Disp32
},
4304 BFD_RELOC_X86_64_GOTPLT64
},
4306 { "GOTOFF", { BFD_RELOC_386_GOTOFF
,
4307 BFD_RELOC_X86_64_GOTOFF64
},
4310 BFD_RELOC_X86_64_GOTPCREL
},
4311 Imm32
| Imm32S
| Disp32
},
4312 { "TLSGD", { BFD_RELOC_386_TLS_GD
,
4313 BFD_RELOC_X86_64_TLSGD
},
4314 Imm32
| Imm32S
| Disp32
},
4315 { "TLSLDM", { BFD_RELOC_386_TLS_LDM
,
4319 BFD_RELOC_X86_64_TLSLD
},
4320 Imm32
| Imm32S
| Disp32
},
4321 { "GOTTPOFF", { BFD_RELOC_386_TLS_IE_32
,
4322 BFD_RELOC_X86_64_GOTTPOFF
},
4323 Imm32
| Imm32S
| Disp32
},
4324 { "TPOFF", { BFD_RELOC_386_TLS_LE_32
,
4325 BFD_RELOC_X86_64_TPOFF32
},
4326 Imm32
| Imm32S
| Imm64
| Disp32
| Disp64
},
4327 { "NTPOFF", { BFD_RELOC_386_TLS_LE
,
4330 { "DTPOFF", { BFD_RELOC_386_TLS_LDO_32
,
4331 BFD_RELOC_X86_64_DTPOFF32
},
4332 Imm32
| Imm32S
| Imm64
| Disp32
| Disp64
},
4333 { "GOTNTPOFF",{ BFD_RELOC_386_TLS_GOTIE
,
4336 { "INDNTPOFF",{ BFD_RELOC_386_TLS_IE
,
4339 { "GOT", { BFD_RELOC_386_GOT32
,
4340 BFD_RELOC_X86_64_GOT32
},
4341 Imm32
| Imm32S
| Disp32
| Imm64
},
4342 { "TLSDESC", { BFD_RELOC_386_TLS_GOTDESC
,
4343 BFD_RELOC_X86_64_GOTPC32_TLSDESC
},
4344 Imm32
| Imm32S
| Disp32
},
4345 { "TLSCALL", { BFD_RELOC_386_TLS_DESC_CALL
,
4346 BFD_RELOC_X86_64_TLSDESC_CALL
},
4347 Imm32
| Imm32S
| Disp32
}
4355 for (cp
= input_line_pointer
; *cp
!= '@'; cp
++)
4356 if (is_end_of_line
[(unsigned char) *cp
])
4359 for (j
= 0; j
< sizeof (gotrel
) / sizeof (gotrel
[0]); j
++)
4363 len
= strlen (gotrel
[j
].str
);
4364 if (strncasecmp (cp
+ 1, gotrel
[j
].str
, len
) == 0)
4366 if (gotrel
[j
].rel
[object_64bit
] != 0)
4369 char *tmpbuf
, *past_reloc
;
4371 *reloc
= gotrel
[j
].rel
[object_64bit
];
4377 if (flag_code
!= CODE_64BIT
)
4378 *types
= Imm32
| Disp32
;
4380 *types
= gotrel
[j
].types64
;
4383 if (GOT_symbol
== NULL
)
4384 GOT_symbol
= symbol_find_or_make (GLOBAL_OFFSET_TABLE_NAME
);
4386 /* Replace the relocation token with ' ', so that
4387 errors like foo@GOTOFF1 will be detected. */
4389 /* The length of the first part of our input line. */
4390 first
= cp
- input_line_pointer
;
4392 /* The second part goes from after the reloc token until
4393 (and including) an end_of_line char. Don't use strlen
4394 here as the end_of_line char may not be a NUL. */
4395 past_reloc
= cp
+ 1 + len
;
4396 for (cp
= past_reloc
; !is_end_of_line
[(unsigned char) *cp
++]; )
4398 second
= cp
- past_reloc
;
4400 /* Allocate and copy string. The trailing NUL shouldn't
4401 be necessary, but be safe. */
4402 tmpbuf
= xmalloc (first
+ second
+ 2);
4403 memcpy (tmpbuf
, input_line_pointer
, first
);
4404 tmpbuf
[first
] = ' ';
4405 memcpy (tmpbuf
+ first
+ 1, past_reloc
, second
);
4406 tmpbuf
[first
+ second
+ 1] = '\0';
4410 as_bad (_("@%s reloc is not supported with %d-bit output format"),
4411 gotrel
[j
].str
, 1 << (5 + object_64bit
));
4416 /* Might be a symbol version string. Don't as_bad here. */
4421 x86_cons (expressionS
*exp
, int size
)
4423 if (size
== 4 || (object_64bit
&& size
== 8))
4425 /* Handle @GOTOFF and the like in an expression. */
4427 char *gotfree_input_line
;
4430 save
= input_line_pointer
;
4431 gotfree_input_line
= lex_got (&got_reloc
, &adjust
, NULL
);
4432 if (gotfree_input_line
)
4433 input_line_pointer
= gotfree_input_line
;
4437 if (gotfree_input_line
)
4439 /* expression () has merrily parsed up to the end of line,
4440 or a comma - in the wrong buffer. Transfer how far
4441 input_line_pointer has moved to the right buffer. */
4442 input_line_pointer
= (save
4443 + (input_line_pointer
- gotfree_input_line
)
4445 free (gotfree_input_line
);
4453 static void signed_cons (int size
)
4455 if (flag_code
== CODE_64BIT
)
4463 pe_directive_secrel (dummy
)
4464 int dummy ATTRIBUTE_UNUSED
;
4471 if (exp
.X_op
== O_symbol
)
4472 exp
.X_op
= O_secrel
;
4474 emit_expr (&exp
, 4);
4476 while (*input_line_pointer
++ == ',');
4478 input_line_pointer
--;
4479 demand_empty_rest_of_line ();
4484 i386_immediate (char *imm_start
)
4486 char *save_input_line_pointer
;
4487 char *gotfree_input_line
;
4490 unsigned int types
= ~0U;
4492 if (i
.imm_operands
== MAX_IMMEDIATE_OPERANDS
)
4494 as_bad (_("at most %d immediate operands are allowed"),
4495 MAX_IMMEDIATE_OPERANDS
);
4499 exp
= &im_expressions
[i
.imm_operands
++];
4500 i
.op
[this_operand
].imms
= exp
;
4502 if (is_space_char (*imm_start
))
4505 save_input_line_pointer
= input_line_pointer
;
4506 input_line_pointer
= imm_start
;
4508 gotfree_input_line
= lex_got (&i
.reloc
[this_operand
], NULL
, &types
);
4509 if (gotfree_input_line
)
4510 input_line_pointer
= gotfree_input_line
;
4512 exp_seg
= expression (exp
);
4515 if (*input_line_pointer
)
4516 as_bad (_("junk `%s' after expression"), input_line_pointer
);
4518 input_line_pointer
= save_input_line_pointer
;
4519 if (gotfree_input_line
)
4520 free (gotfree_input_line
);
4522 if (exp
->X_op
== O_absent
|| exp
->X_op
== O_big
)
4524 /* Missing or bad expr becomes absolute 0. */
4525 as_bad (_("missing or invalid immediate expression `%s' taken as 0"),
4527 exp
->X_op
= O_constant
;
4528 exp
->X_add_number
= 0;
4529 exp
->X_add_symbol
= (symbolS
*) 0;
4530 exp
->X_op_symbol
= (symbolS
*) 0;
4532 else if (exp
->X_op
== O_constant
)
4534 /* Size it properly later. */
4535 i
.types
[this_operand
] |= Imm64
;
4536 /* If BFD64, sign extend val. */
4537 if (!use_rela_relocations
4538 && (exp
->X_add_number
& ~(((addressT
) 2 << 31) - 1)) == 0)
4540 = (exp
->X_add_number
^ ((addressT
) 1 << 31)) - ((addressT
) 1 << 31);
4542 #if (defined (OBJ_AOUT) || defined (OBJ_MAYBE_AOUT))
4543 else if (OUTPUT_FLAVOR
== bfd_target_aout_flavour
4544 && exp_seg
!= absolute_section
4545 && exp_seg
!= text_section
4546 && exp_seg
!= data_section
4547 && exp_seg
!= bss_section
4548 && exp_seg
!= undefined_section
4549 && !bfd_is_com_section (exp_seg
))
4551 as_bad (_("unimplemented segment %s in operand"), exp_seg
->name
);
4555 else if (!intel_syntax
&& exp
->X_op
== O_register
)
4557 as_bad (_("illegal immediate register operand %s"), imm_start
);
4562 /* This is an address. The size of the address will be
4563 determined later, depending on destination register,
4564 suffix, or the default for the section. */
4565 i
.types
[this_operand
] |= Imm8
| Imm16
| Imm32
| Imm32S
| Imm64
;
4566 i
.types
[this_operand
] &= types
;
4573 i386_scale (char *scale
)
4576 char *save
= input_line_pointer
;
4578 input_line_pointer
= scale
;
4579 val
= get_absolute_expression ();
4584 i
.log2_scale_factor
= 0;
4587 i
.log2_scale_factor
= 1;
4590 i
.log2_scale_factor
= 2;
4593 i
.log2_scale_factor
= 3;
4597 char sep
= *input_line_pointer
;
4599 *input_line_pointer
= '\0';
4600 as_bad (_("expecting scale factor of 1, 2, 4, or 8: got `%s'"),
4602 *input_line_pointer
= sep
;
4603 input_line_pointer
= save
;
4607 if (i
.log2_scale_factor
!= 0 && i
.index_reg
== 0)
4609 as_warn (_("scale factor of %d without an index register"),
4610 1 << i
.log2_scale_factor
);
4611 #if SCALE1_WHEN_NO_INDEX
4612 i
.log2_scale_factor
= 0;
4615 scale
= input_line_pointer
;
4616 input_line_pointer
= save
;
4621 i386_displacement (char *disp_start
, char *disp_end
)
4625 char *save_input_line_pointer
;
4626 char *gotfree_input_line
;
4627 int bigdisp
, override
;
4628 unsigned int types
= Disp
;
4630 if (i
.disp_operands
== MAX_MEMORY_OPERANDS
)
4632 as_bad (_("at most %d displacement operands are allowed"),
4633 MAX_MEMORY_OPERANDS
);
4637 if ((i
.types
[this_operand
] & JumpAbsolute
)
4638 || !(current_templates
->start
->opcode_modifier
& (Jump
| JumpDword
)))
4641 override
= (i
.prefix
[ADDR_PREFIX
] != 0);
4645 /* For PC-relative branches, the width of the displacement
4646 is dependent upon data size, not address size. */
4648 override
= (i
.prefix
[DATA_PREFIX
] != 0);
4650 if (flag_code
== CODE_64BIT
)
4653 bigdisp
= ((override
|| i
.suffix
== WORD_MNEM_SUFFIX
)
4655 : Disp32S
| Disp32
);
4657 bigdisp
= Disp64
| Disp32S
| Disp32
;
4664 override
= (i
.suffix
== (flag_code
!= CODE_16BIT
4666 : LONG_MNEM_SUFFIX
));
4669 if ((flag_code
== CODE_16BIT
) ^ override
)
4672 i
.types
[this_operand
] |= bigdisp
;
4674 exp
= &disp_expressions
[i
.disp_operands
];
4675 i
.op
[this_operand
].disps
= exp
;
4677 save_input_line_pointer
= input_line_pointer
;
4678 input_line_pointer
= disp_start
;
4679 END_STRING_AND_SAVE (disp_end
);
4681 #ifndef GCC_ASM_O_HACK
4682 #define GCC_ASM_O_HACK 0
4685 END_STRING_AND_SAVE (disp_end
+ 1);
4686 if ((i
.types
[this_operand
] & BaseIndex
) != 0
4687 && displacement_string_end
[-1] == '+')
4689 /* This hack is to avoid a warning when using the "o"
4690 constraint within gcc asm statements.
4693 #define _set_tssldt_desc(n,addr,limit,type) \
4694 __asm__ __volatile__ ( \
4696 "movw %w1,2+%0\n\t" \
4698 "movb %b1,4+%0\n\t" \
4699 "movb %4,5+%0\n\t" \
4700 "movb $0,6+%0\n\t" \
4701 "movb %h1,7+%0\n\t" \
4703 : "=o"(*(n)) : "q" (addr), "ri"(limit), "i"(type))
4705 This works great except that the output assembler ends
4706 up looking a bit weird if it turns out that there is
4707 no offset. You end up producing code that looks like:
4720 So here we provide the missing zero. */
4722 *displacement_string_end
= '0';
4725 gotfree_input_line
= lex_got (&i
.reloc
[this_operand
], NULL
, &types
);
4726 if (gotfree_input_line
)
4727 input_line_pointer
= gotfree_input_line
;
4729 exp_seg
= expression (exp
);
4732 if (*input_line_pointer
)
4733 as_bad (_("junk `%s' after expression"), input_line_pointer
);
4735 RESTORE_END_STRING (disp_end
+ 1);
4737 RESTORE_END_STRING (disp_end
);
4738 input_line_pointer
= save_input_line_pointer
;
4739 if (gotfree_input_line
)
4740 free (gotfree_input_line
);
4742 /* We do this to make sure that the section symbol is in
4743 the symbol table. We will ultimately change the relocation
4744 to be relative to the beginning of the section. */
4745 if (i
.reloc
[this_operand
] == BFD_RELOC_386_GOTOFF
4746 || i
.reloc
[this_operand
] == BFD_RELOC_X86_64_GOTPCREL
4747 || i
.reloc
[this_operand
] == BFD_RELOC_X86_64_GOTOFF64
)
4749 if (exp
->X_op
!= O_symbol
)
4751 as_bad (_("bad expression used with @%s"),
4752 (i
.reloc
[this_operand
] == BFD_RELOC_X86_64_GOTPCREL
4758 if (S_IS_LOCAL (exp
->X_add_symbol
)
4759 && S_GET_SEGMENT (exp
->X_add_symbol
) != undefined_section
)
4760 section_symbol (S_GET_SEGMENT (exp
->X_add_symbol
));
4761 exp
->X_op
= O_subtract
;
4762 exp
->X_op_symbol
= GOT_symbol
;
4763 if (i
.reloc
[this_operand
] == BFD_RELOC_X86_64_GOTPCREL
)
4764 i
.reloc
[this_operand
] = BFD_RELOC_32_PCREL
;
4765 else if (i
.reloc
[this_operand
] == BFD_RELOC_X86_64_GOTOFF64
)
4766 i
.reloc
[this_operand
] = BFD_RELOC_64
;
4768 i
.reloc
[this_operand
] = BFD_RELOC_32
;
4771 if (exp
->X_op
== O_absent
|| exp
->X_op
== O_big
)
4773 /* Missing or bad expr becomes absolute 0. */
4774 as_bad (_("missing or invalid displacement expression `%s' taken as 0"),
4776 exp
->X_op
= O_constant
;
4777 exp
->X_add_number
= 0;
4778 exp
->X_add_symbol
= (symbolS
*) 0;
4779 exp
->X_op_symbol
= (symbolS
*) 0;
4782 #if (defined (OBJ_AOUT) || defined (OBJ_MAYBE_AOUT))
4783 if (exp
->X_op
!= O_constant
4784 && OUTPUT_FLAVOR
== bfd_target_aout_flavour
4785 && exp_seg
!= absolute_section
4786 && exp_seg
!= text_section
4787 && exp_seg
!= data_section
4788 && exp_seg
!= bss_section
4789 && exp_seg
!= undefined_section
4790 && !bfd_is_com_section (exp_seg
))
4792 as_bad (_("unimplemented segment %s in operand"), exp_seg
->name
);
4797 if (!(i
.types
[this_operand
] & ~Disp
))
4798 i
.types
[this_operand
] &= types
;
4803 /* Make sure the memory operand we've been dealt is valid.
4804 Return 1 on success, 0 on a failure. */
4807 i386_index_check (const char *operand_string
)
4810 #if INFER_ADDR_PREFIX
4816 if ((current_templates
->start
->cpu_flags
& CpuSVME
)
4817 && current_templates
->end
[-1].operand_types
[0] == AnyMem
)
4819 /* Memory operands of SVME insns are special in that they only allow
4820 rAX as their memory address and ignore any segment override. */
4823 /* SKINIT is even more restrictive: it always requires EAX. */
4824 if (strcmp (current_templates
->start
->name
, "skinit") == 0)
4826 else if (flag_code
== CODE_64BIT
)
4827 RegXX
= i
.prefix
[ADDR_PREFIX
] == 0 ? Reg64
: Reg32
;
4829 RegXX
= ((flag_code
== CODE_16BIT
) ^ (i
.prefix
[ADDR_PREFIX
] != 0)
4833 || !(i
.base_reg
->reg_type
& Acc
)
4834 || !(i
.base_reg
->reg_type
& RegXX
)
4836 || (i
.types
[0] & Disp
))
4839 else if (flag_code
== CODE_64BIT
)
4841 unsigned RegXX
= (i
.prefix
[ADDR_PREFIX
] == 0 ? Reg64
: Reg32
);
4844 && ((i
.base_reg
->reg_type
& RegXX
) == 0)
4845 && (i
.base_reg
->reg_type
!= BaseIndex
4848 && ((i
.index_reg
->reg_type
& (RegXX
| BaseIndex
))
4849 != (RegXX
| BaseIndex
))))
4854 if ((flag_code
== CODE_16BIT
) ^ (i
.prefix
[ADDR_PREFIX
] != 0))
4858 && ((i
.base_reg
->reg_type
& (Reg16
| BaseIndex
| RegRex
))
4859 != (Reg16
| BaseIndex
)))
4861 && (((i
.index_reg
->reg_type
& (Reg16
| BaseIndex
))
4862 != (Reg16
| BaseIndex
))
4864 && i
.base_reg
->reg_num
< 6
4865 && i
.index_reg
->reg_num
>= 6
4866 && i
.log2_scale_factor
== 0))))
4873 && (i
.base_reg
->reg_type
& (Reg32
| RegRex
)) != Reg32
)
4875 && ((i
.index_reg
->reg_type
& (Reg32
| BaseIndex
| RegRex
))
4876 != (Reg32
| BaseIndex
))))
4882 #if INFER_ADDR_PREFIX
4883 if (i
.prefix
[ADDR_PREFIX
] == 0)
4885 i
.prefix
[ADDR_PREFIX
] = ADDR_PREFIX_OPCODE
;
4887 /* Change the size of any displacement too. At most one of
4888 Disp16 or Disp32 is set.
4889 FIXME. There doesn't seem to be any real need for separate
4890 Disp16 and Disp32 flags. The same goes for Imm16 and Imm32.
4891 Removing them would probably clean up the code quite a lot. */
4892 if (flag_code
!= CODE_64BIT
4893 && (i
.types
[this_operand
] & (Disp16
| Disp32
)))
4894 i
.types
[this_operand
] ^= (Disp16
| Disp32
);
4899 as_bad (_("`%s' is not a valid base/index expression"),
4903 as_bad (_("`%s' is not a valid %s bit base/index expression"),
4905 flag_code_names
[flag_code
]);
4910 /* Parse OPERAND_STRING into the i386_insn structure I. Returns non-zero
4914 i386_operand (char *operand_string
)
4918 char *op_string
= operand_string
;
4920 if (is_space_char (*op_string
))
4923 /* We check for an absolute prefix (differentiating,
4924 for example, 'jmp pc_relative_label' from 'jmp *absolute_label'. */
4925 if (*op_string
== ABSOLUTE_PREFIX
)
4928 if (is_space_char (*op_string
))
4930 i
.types
[this_operand
] |= JumpAbsolute
;
4933 /* Check if operand is a register. */
4934 if ((r
= parse_register (op_string
, &end_op
)) != NULL
)
4936 /* Check for a segment override by searching for ':' after a
4937 segment register. */
4939 if (is_space_char (*op_string
))
4941 if (*op_string
== ':' && (r
->reg_type
& (SReg2
| SReg3
)))
4946 i
.seg
[i
.mem_operands
] = &es
;
4949 i
.seg
[i
.mem_operands
] = &cs
;
4952 i
.seg
[i
.mem_operands
] = &ss
;
4955 i
.seg
[i
.mem_operands
] = &ds
;
4958 i
.seg
[i
.mem_operands
] = &fs
;
4961 i
.seg
[i
.mem_operands
] = &gs
;
4965 /* Skip the ':' and whitespace. */
4967 if (is_space_char (*op_string
))
4970 if (!is_digit_char (*op_string
)
4971 && !is_identifier_char (*op_string
)
4972 && *op_string
!= '('
4973 && *op_string
!= ABSOLUTE_PREFIX
)
4975 as_bad (_("bad memory operand `%s'"), op_string
);
4978 /* Handle case of %es:*foo. */
4979 if (*op_string
== ABSOLUTE_PREFIX
)
4982 if (is_space_char (*op_string
))
4984 i
.types
[this_operand
] |= JumpAbsolute
;
4986 goto do_memory_reference
;
4990 as_bad (_("junk `%s' after register"), op_string
);
4993 i
.types
[this_operand
] |= r
->reg_type
& ~BaseIndex
;
4994 i
.op
[this_operand
].regs
= r
;
4997 else if (*op_string
== REGISTER_PREFIX
)
4999 as_bad (_("bad register name `%s'"), op_string
);
5002 else if (*op_string
== IMMEDIATE_PREFIX
)
5005 if (i
.types
[this_operand
] & JumpAbsolute
)
5007 as_bad (_("immediate operand illegal with absolute jump"));
5010 if (!i386_immediate (op_string
))
5013 else if (is_digit_char (*op_string
)
5014 || is_identifier_char (*op_string
)
5015 || *op_string
== '(')
5017 /* This is a memory reference of some sort. */
5020 /* Start and end of displacement string expression (if found). */
5021 char *displacement_string_start
;
5022 char *displacement_string_end
;
5024 do_memory_reference
:
5025 if ((i
.mem_operands
== 1
5026 && (current_templates
->start
->opcode_modifier
& IsString
) == 0)
5027 || i
.mem_operands
== 2)
5029 as_bad (_("too many memory references for `%s'"),
5030 current_templates
->start
->name
);
5034 /* Check for base index form. We detect the base index form by
5035 looking for an ')' at the end of the operand, searching
5036 for the '(' matching it, and finding a REGISTER_PREFIX or ','
5038 base_string
= op_string
+ strlen (op_string
);
5041 if (is_space_char (*base_string
))
5044 /* If we only have a displacement, set-up for it to be parsed later. */
5045 displacement_string_start
= op_string
;
5046 displacement_string_end
= base_string
+ 1;
5048 if (*base_string
== ')')
5051 unsigned int parens_balanced
= 1;
5052 /* We've already checked that the number of left & right ()'s are
5053 equal, so this loop will not be infinite. */
5057 if (*base_string
== ')')
5059 if (*base_string
== '(')
5062 while (parens_balanced
);
5064 temp_string
= base_string
;
5066 /* Skip past '(' and whitespace. */
5068 if (is_space_char (*base_string
))
5071 if (*base_string
== ','
5072 || ((i
.base_reg
= parse_register (base_string
, &end_op
))
5075 displacement_string_end
= temp_string
;
5077 i
.types
[this_operand
] |= BaseIndex
;
5081 base_string
= end_op
;
5082 if (is_space_char (*base_string
))
5086 /* There may be an index reg or scale factor here. */
5087 if (*base_string
== ',')
5090 if (is_space_char (*base_string
))
5093 if ((i
.index_reg
= parse_register (base_string
, &end_op
))
5096 base_string
= end_op
;
5097 if (is_space_char (*base_string
))
5099 if (*base_string
== ',')
5102 if (is_space_char (*base_string
))
5105 else if (*base_string
!= ')')
5107 as_bad (_("expecting `,' or `)' "
5108 "after index register in `%s'"),
5113 else if (*base_string
== REGISTER_PREFIX
)
5115 as_bad (_("bad register name `%s'"), base_string
);
5119 /* Check for scale factor. */
5120 if (*base_string
!= ')')
5122 char *end_scale
= i386_scale (base_string
);
5127 base_string
= end_scale
;
5128 if (is_space_char (*base_string
))
5130 if (*base_string
!= ')')
5132 as_bad (_("expecting `)' "
5133 "after scale factor in `%s'"),
5138 else if (!i
.index_reg
)
5140 as_bad (_("expecting index register or scale factor "
5141 "after `,'; got '%c'"),
5146 else if (*base_string
!= ')')
5148 as_bad (_("expecting `,' or `)' "
5149 "after base register in `%s'"),
5154 else if (*base_string
== REGISTER_PREFIX
)
5156 as_bad (_("bad register name `%s'"), base_string
);
5161 /* If there's an expression beginning the operand, parse it,
5162 assuming displacement_string_start and
5163 displacement_string_end are meaningful. */
5164 if (displacement_string_start
!= displacement_string_end
)
5166 if (!i386_displacement (displacement_string_start
,
5167 displacement_string_end
))
5171 /* Special case for (%dx) while doing input/output op. */
5173 && i
.base_reg
->reg_type
== (Reg16
| InOutPortReg
)
5175 && i
.log2_scale_factor
== 0
5176 && i
.seg
[i
.mem_operands
] == 0
5177 && (i
.types
[this_operand
] & Disp
) == 0)
5179 i
.types
[this_operand
] = InOutPortReg
;
5183 if (i386_index_check (operand_string
) == 0)
5189 /* It's not a memory operand; argh! */
5190 as_bad (_("invalid char %s beginning operand %d `%s'"),
5191 output_invalid (*op_string
),
5196 return 1; /* Normal return. */
5199 /* md_estimate_size_before_relax()
5201 Called just before relax() for rs_machine_dependent frags. The x86
5202 assembler uses these frags to handle variable size jump
5205 Any symbol that is now undefined will not become defined.
5206 Return the correct fr_subtype in the frag.
5207 Return the initial "guess for variable size of frag" to caller.
5208 The guess is actually the growth beyond the fixed part. Whatever
5209 we do to grow the fixed or variable part contributes to our
5213 md_estimate_size_before_relax (fragP
, segment
)
5217 /* We've already got fragP->fr_subtype right; all we have to do is
5218 check for un-relaxable symbols. On an ELF system, we can't relax
5219 an externally visible symbol, because it may be overridden by a
5221 if (S_GET_SEGMENT (fragP
->fr_symbol
) != segment
5222 #if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
5224 && (S_IS_EXTERNAL (fragP
->fr_symbol
)
5225 || S_IS_WEAK (fragP
->fr_symbol
)))
5229 /* Symbol is undefined in this segment, or we need to keep a
5230 reloc so that weak symbols can be overridden. */
5231 int size
= (fragP
->fr_subtype
& CODE16
) ? 2 : 4;
5232 enum bfd_reloc_code_real reloc_type
;
5233 unsigned char *opcode
;
5236 if (fragP
->fr_var
!= NO_RELOC
)
5237 reloc_type
= fragP
->fr_var
;
5239 reloc_type
= BFD_RELOC_16_PCREL
;
5241 reloc_type
= BFD_RELOC_32_PCREL
;
5243 old_fr_fix
= fragP
->fr_fix
;
5244 opcode
= (unsigned char *) fragP
->fr_opcode
;
5246 switch (TYPE_FROM_RELAX_STATE (fragP
->fr_subtype
))
5249 /* Make jmp (0xeb) a (d)word displacement jump. */
5251 fragP
->fr_fix
+= size
;
5252 fix_new (fragP
, old_fr_fix
, size
,
5254 fragP
->fr_offset
, 1,
5260 && (!no_cond_jump_promotion
|| fragP
->fr_var
!= NO_RELOC
))
5262 /* Negate the condition, and branch past an
5263 unconditional jump. */
5266 /* Insert an unconditional jump. */
5268 /* We added two extra opcode bytes, and have a two byte
5270 fragP
->fr_fix
+= 2 + 2;
5271 fix_new (fragP
, old_fr_fix
+ 2, 2,
5273 fragP
->fr_offset
, 1,
5280 if (no_cond_jump_promotion
&& fragP
->fr_var
== NO_RELOC
)
5285 fixP
= fix_new (fragP
, old_fr_fix
, 1,
5287 fragP
->fr_offset
, 1,
5289 fixP
->fx_signed
= 1;
5293 /* This changes the byte-displacement jump 0x7N
5294 to the (d)word-displacement jump 0x0f,0x8N. */
5295 opcode
[1] = opcode
[0] + 0x10;
5296 opcode
[0] = TWO_BYTE_OPCODE_ESCAPE
;
5297 /* We've added an opcode byte. */
5298 fragP
->fr_fix
+= 1 + size
;
5299 fix_new (fragP
, old_fr_fix
+ 1, size
,
5301 fragP
->fr_offset
, 1,
5306 BAD_CASE (fragP
->fr_subtype
);
5310 return fragP
->fr_fix
- old_fr_fix
;
5313 /* Guess size depending on current relax state. Initially the relax
5314 state will correspond to a short jump and we return 1, because
5315 the variable part of the frag (the branch offset) is one byte
5316 long. However, we can relax a section more than once and in that
5317 case we must either set fr_subtype back to the unrelaxed state,
5318 or return the value for the appropriate branch. */
5319 return md_relax_table
[fragP
->fr_subtype
].rlx_length
;
5322 /* Called after relax() is finished.
5324 In: Address of frag.
5325 fr_type == rs_machine_dependent.
5326 fr_subtype is what the address relaxed to.
5328 Out: Any fixSs and constants are set up.
5329 Caller will turn frag into a ".space 0". */
5332 md_convert_frag (abfd
, sec
, fragP
)
5333 bfd
*abfd ATTRIBUTE_UNUSED
;
5334 segT sec ATTRIBUTE_UNUSED
;
5337 unsigned char *opcode
;
5338 unsigned char *where_to_put_displacement
= NULL
;
5339 offsetT target_address
;
5340 offsetT opcode_address
;
5341 unsigned int extension
= 0;
5342 offsetT displacement_from_opcode_start
;
5344 opcode
= (unsigned char *) fragP
->fr_opcode
;
5346 /* Address we want to reach in file space. */
5347 target_address
= S_GET_VALUE (fragP
->fr_symbol
) + fragP
->fr_offset
;
5349 /* Address opcode resides at in file space. */
5350 opcode_address
= fragP
->fr_address
+ fragP
->fr_fix
;
5352 /* Displacement from opcode start to fill into instruction. */
5353 displacement_from_opcode_start
= target_address
- opcode_address
;
5355 if ((fragP
->fr_subtype
& BIG
) == 0)
5357 /* Don't have to change opcode. */
5358 extension
= 1; /* 1 opcode + 1 displacement */
5359 where_to_put_displacement
= &opcode
[1];
5363 if (no_cond_jump_promotion
5364 && TYPE_FROM_RELAX_STATE (fragP
->fr_subtype
) != UNCOND_JUMP
)
5365 as_warn_where (fragP
->fr_file
, fragP
->fr_line
,
5366 _("long jump required"));
5368 switch (fragP
->fr_subtype
)
5370 case ENCODE_RELAX_STATE (UNCOND_JUMP
, BIG
):
5371 extension
= 4; /* 1 opcode + 4 displacement */
5373 where_to_put_displacement
= &opcode
[1];
5376 case ENCODE_RELAX_STATE (UNCOND_JUMP
, BIG16
):
5377 extension
= 2; /* 1 opcode + 2 displacement */
5379 where_to_put_displacement
= &opcode
[1];
5382 case ENCODE_RELAX_STATE (COND_JUMP
, BIG
):
5383 case ENCODE_RELAX_STATE (COND_JUMP86
, BIG
):
5384 extension
= 5; /* 2 opcode + 4 displacement */
5385 opcode
[1] = opcode
[0] + 0x10;
5386 opcode
[0] = TWO_BYTE_OPCODE_ESCAPE
;
5387 where_to_put_displacement
= &opcode
[2];
5390 case ENCODE_RELAX_STATE (COND_JUMP
, BIG16
):
5391 extension
= 3; /* 2 opcode + 2 displacement */
5392 opcode
[1] = opcode
[0] + 0x10;
5393 opcode
[0] = TWO_BYTE_OPCODE_ESCAPE
;
5394 where_to_put_displacement
= &opcode
[2];
5397 case ENCODE_RELAX_STATE (COND_JUMP86
, BIG16
):
5402 where_to_put_displacement
= &opcode
[3];
5406 BAD_CASE (fragP
->fr_subtype
);
5411 /* If size if less then four we are sure that the operand fits,
5412 but if it's 4, then it could be that the displacement is larger
5414 if (DISP_SIZE_FROM_RELAX_STATE (fragP
->fr_subtype
) == 4
5416 && ((addressT
) (displacement_from_opcode_start
- extension
5417 + ((addressT
) 1 << 31))
5418 > (((addressT
) 2 << 31) - 1)))
5420 as_bad_where (fragP
->fr_file
, fragP
->fr_line
,
5421 _("jump target out of range"));
5422 /* Make us emit 0. */
5423 displacement_from_opcode_start
= extension
;
5425 /* Now put displacement after opcode. */
5426 md_number_to_chars ((char *) where_to_put_displacement
,
5427 (valueT
) (displacement_from_opcode_start
- extension
),
5428 DISP_SIZE_FROM_RELAX_STATE (fragP
->fr_subtype
));
5429 fragP
->fr_fix
+= extension
;
5432 /* Size of byte displacement jmp. */
5433 int md_short_jump_size
= 2;
5435 /* Size of dword displacement jmp. */
5436 int md_long_jump_size
= 5;
5439 md_create_short_jump (ptr
, from_addr
, to_addr
, frag
, to_symbol
)
5441 addressT from_addr
, to_addr
;
5442 fragS
*frag ATTRIBUTE_UNUSED
;
5443 symbolS
*to_symbol ATTRIBUTE_UNUSED
;
5447 offset
= to_addr
- (from_addr
+ 2);
5448 /* Opcode for byte-disp jump. */
5449 md_number_to_chars (ptr
, (valueT
) 0xeb, 1);
5450 md_number_to_chars (ptr
+ 1, (valueT
) offset
, 1);
5454 md_create_long_jump (ptr
, from_addr
, to_addr
, frag
, to_symbol
)
5456 addressT from_addr
, to_addr
;
5457 fragS
*frag ATTRIBUTE_UNUSED
;
5458 symbolS
*to_symbol ATTRIBUTE_UNUSED
;
5462 offset
= to_addr
- (from_addr
+ 5);
5463 md_number_to_chars (ptr
, (valueT
) 0xe9, 1);
5464 md_number_to_chars (ptr
+ 1, (valueT
) offset
, 4);
5467 /* Apply a fixup (fixS) to segment data, once it has been determined
5468 by our caller that we have all the info we need to fix it up.
5470 On the 386, immediates, displacements, and data pointers are all in
5471 the same (little-endian) format, so we don't need to care about which
5475 md_apply_fix (fixP
, valP
, seg
)
5476 /* The fix we're to put in. */
5478 /* Pointer to the value of the bits. */
5480 /* Segment fix is from. */
5481 segT seg ATTRIBUTE_UNUSED
;
5483 char *p
= fixP
->fx_where
+ fixP
->fx_frag
->fr_literal
;
5484 valueT value
= *valP
;
5486 #if !defined (TE_Mach)
5489 switch (fixP
->fx_r_type
)
5495 fixP
->fx_r_type
= BFD_RELOC_64_PCREL
;
5498 case BFD_RELOC_X86_64_32S
:
5499 fixP
->fx_r_type
= BFD_RELOC_32_PCREL
;
5502 fixP
->fx_r_type
= BFD_RELOC_16_PCREL
;
5505 fixP
->fx_r_type
= BFD_RELOC_8_PCREL
;
5510 if (fixP
->fx_addsy
!= NULL
5511 && (fixP
->fx_r_type
== BFD_RELOC_32_PCREL
5512 || fixP
->fx_r_type
== BFD_RELOC_64_PCREL
5513 || fixP
->fx_r_type
== BFD_RELOC_16_PCREL
5514 || fixP
->fx_r_type
== BFD_RELOC_8_PCREL
)
5515 && !use_rela_relocations
)
5517 /* This is a hack. There should be a better way to handle this.
5518 This covers for the fact that bfd_install_relocation will
5519 subtract the current location (for partial_inplace, PC relative
5520 relocations); see more below. */
5524 || OUTPUT_FLAVOR
== bfd_target_coff_flavour
5527 value
+= fixP
->fx_where
+ fixP
->fx_frag
->fr_address
;
5529 #if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
5532 segT sym_seg
= S_GET_SEGMENT (fixP
->fx_addsy
);
5535 || (symbol_section_p (fixP
->fx_addsy
)
5536 && sym_seg
!= absolute_section
))
5537 && !generic_force_reloc (fixP
))
5539 /* Yes, we add the values in twice. This is because
5540 bfd_install_relocation subtracts them out again. I think
5541 bfd_install_relocation is broken, but I don't dare change
5543 value
+= fixP
->fx_where
+ fixP
->fx_frag
->fr_address
;
5547 #if defined (OBJ_COFF) && defined (TE_PE)
5548 /* For some reason, the PE format does not store a
5549 section address offset for a PC relative symbol. */
5550 if (S_GET_SEGMENT (fixP
->fx_addsy
) != seg
5551 || S_IS_WEAK (fixP
->fx_addsy
))
5552 value
+= md_pcrel_from (fixP
);
5556 /* Fix a few things - the dynamic linker expects certain values here,
5557 and we must not disappoint it. */
5558 #if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
5559 if (IS_ELF
&& fixP
->fx_addsy
)
5560 switch (fixP
->fx_r_type
)
5562 case BFD_RELOC_386_PLT32
:
5563 case BFD_RELOC_X86_64_PLT32
:
5564 /* Make the jump instruction point to the address of the operand. At
5565 runtime we merely add the offset to the actual PLT entry. */
5569 case BFD_RELOC_386_TLS_GD
:
5570 case BFD_RELOC_386_TLS_LDM
:
5571 case BFD_RELOC_386_TLS_IE_32
:
5572 case BFD_RELOC_386_TLS_IE
:
5573 case BFD_RELOC_386_TLS_GOTIE
:
5574 case BFD_RELOC_386_TLS_GOTDESC
:
5575 case BFD_RELOC_X86_64_TLSGD
:
5576 case BFD_RELOC_X86_64_TLSLD
:
5577 case BFD_RELOC_X86_64_GOTTPOFF
:
5578 case BFD_RELOC_X86_64_GOTPC32_TLSDESC
:
5579 value
= 0; /* Fully resolved at runtime. No addend. */
5581 case BFD_RELOC_386_TLS_LE
:
5582 case BFD_RELOC_386_TLS_LDO_32
:
5583 case BFD_RELOC_386_TLS_LE_32
:
5584 case BFD_RELOC_X86_64_DTPOFF32
:
5585 case BFD_RELOC_X86_64_DTPOFF64
:
5586 case BFD_RELOC_X86_64_TPOFF32
:
5587 case BFD_RELOC_X86_64_TPOFF64
:
5588 S_SET_THREAD_LOCAL (fixP
->fx_addsy
);
5591 case BFD_RELOC_386_TLS_DESC_CALL
:
5592 case BFD_RELOC_X86_64_TLSDESC_CALL
:
5593 value
= 0; /* Fully resolved at runtime. No addend. */
5594 S_SET_THREAD_LOCAL (fixP
->fx_addsy
);
5598 case BFD_RELOC_386_GOT32
:
5599 case BFD_RELOC_X86_64_GOT32
:
5600 value
= 0; /* Fully resolved at runtime. No addend. */
5603 case BFD_RELOC_VTABLE_INHERIT
:
5604 case BFD_RELOC_VTABLE_ENTRY
:
5611 #endif /* defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF) */
5613 #endif /* !defined (TE_Mach) */
5615 /* Are we finished with this relocation now? */
5616 if (fixP
->fx_addsy
== NULL
)
5618 else if (use_rela_relocations
)
5620 fixP
->fx_no_overflow
= 1;
5621 /* Remember value for tc_gen_reloc. */
5622 fixP
->fx_addnumber
= value
;
5626 md_number_to_chars (p
, value
, fixP
->fx_size
);
5629 #define MAX_LITTLENUMS 6
5631 /* Turn the string pointed to by litP into a floating point constant
5632 of type TYPE, and emit the appropriate bytes. The number of
5633 LITTLENUMS emitted is stored in *SIZEP. An error message is
5634 returned, or NULL on OK. */
5637 md_atof (type
, litP
, sizeP
)
5643 LITTLENUM_TYPE words
[MAX_LITTLENUMS
];
5644 LITTLENUM_TYPE
*wordP
;
5666 return _("Bad call to md_atof ()");
5668 t
= atof_ieee (input_line_pointer
, type
, words
);
5670 input_line_pointer
= t
;
5672 *sizeP
= prec
* sizeof (LITTLENUM_TYPE
);
5673 /* This loops outputs the LITTLENUMs in REVERSE order; in accord with
5674 the bigendian 386. */
5675 for (wordP
= words
+ prec
- 1; prec
--;)
5677 md_number_to_chars (litP
, (valueT
) (*wordP
--), sizeof (LITTLENUM_TYPE
));
5678 litP
+= sizeof (LITTLENUM_TYPE
);
5683 static char output_invalid_buf
[sizeof (unsigned char) * 2 + 6];
5686 output_invalid (int c
)
5689 snprintf (output_invalid_buf
, sizeof (output_invalid_buf
),
5692 snprintf (output_invalid_buf
, sizeof (output_invalid_buf
),
5693 "(0x%x)", (unsigned char) c
);
5694 return output_invalid_buf
;
5697 /* REG_STRING starts *before* REGISTER_PREFIX. */
5699 static const reg_entry
*
5700 parse_real_register (char *reg_string
, char **end_op
)
5702 char *s
= reg_string
;
5704 char reg_name_given
[MAX_REG_NAME_SIZE
+ 1];
5707 /* Skip possible REGISTER_PREFIX and possible whitespace. */
5708 if (*s
== REGISTER_PREFIX
)
5711 if (is_space_char (*s
))
5715 while ((*p
++ = register_chars
[(unsigned char) *s
]) != '\0')
5717 if (p
>= reg_name_given
+ MAX_REG_NAME_SIZE
)
5718 return (const reg_entry
*) NULL
;
5722 /* For naked regs, make sure that we are not dealing with an identifier.
5723 This prevents confusing an identifier like `eax_var' with register
5725 if (allow_naked_reg
&& identifier_chars
[(unsigned char) *s
])
5726 return (const reg_entry
*) NULL
;
5730 r
= (const reg_entry
*) hash_find (reg_hash
, reg_name_given
);
5732 /* Handle floating point regs, allowing spaces in the (i) part. */
5733 if (r
== i386_regtab
/* %st is first entry of table */)
5735 if (is_space_char (*s
))
5740 if (is_space_char (*s
))
5742 if (*s
>= '0' && *s
<= '7')
5744 r
= &i386_float_regtab
[*s
- '0'];
5746 if (is_space_char (*s
))
5754 /* We have "%st(" then garbage. */
5755 return (const reg_entry
*) NULL
;
5760 && ((r
->reg_flags
& (RegRex64
| RegRex
)) | (r
->reg_type
& Reg64
)) != 0
5761 && (r
->reg_type
!= Control
|| !(cpu_arch_flags
& CpuSledgehammer
))
5762 && flag_code
!= CODE_64BIT
)
5763 return (const reg_entry
*) NULL
;
5768 /* REG_STRING starts *before* REGISTER_PREFIX. */
5770 static const reg_entry
*
5771 parse_register (char *reg_string
, char **end_op
)
5775 if (*reg_string
== REGISTER_PREFIX
|| allow_naked_reg
)
5776 r
= parse_real_register (reg_string
, end_op
);
5781 char *save
= input_line_pointer
;
5785 input_line_pointer
= reg_string
;
5786 c
= get_symbol_end ();
5787 symbolP
= symbol_find (reg_string
);
5788 if (symbolP
&& S_GET_SEGMENT (symbolP
) == reg_section
)
5790 const expressionS
*e
= symbol_get_value_expression (symbolP
);
5792 know (e
->X_op
== O_register
);
5793 know (e
->X_add_number
>= 0
5794 && (valueT
) e
->X_add_number
< i386_regtab_size
);
5795 r
= i386_regtab
+ e
->X_add_number
;
5796 *end_op
= input_line_pointer
;
5798 *input_line_pointer
= c
;
5799 input_line_pointer
= save
;
5805 i386_parse_name (char *name
, expressionS
*e
, char *nextcharP
)
5808 char *end
= input_line_pointer
;
5811 r
= parse_register (name
, &input_line_pointer
);
5812 if (r
&& end
<= input_line_pointer
)
5814 *nextcharP
= *input_line_pointer
;
5815 *input_line_pointer
= 0;
5816 e
->X_op
= O_register
;
5817 e
->X_add_number
= r
- i386_regtab
;
5820 input_line_pointer
= end
;
5826 md_operand (expressionS
*e
)
5828 if (*input_line_pointer
== REGISTER_PREFIX
)
5831 const reg_entry
*r
= parse_real_register (input_line_pointer
, &end
);
5835 e
->X_op
= O_register
;
5836 e
->X_add_number
= r
- i386_regtab
;
5837 input_line_pointer
= end
;
5843 #if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
5844 const char *md_shortopts
= "kVQ:sqn";
5846 const char *md_shortopts
= "qn";
5849 #define OPTION_32 (OPTION_MD_BASE + 0)
5850 #define OPTION_64 (OPTION_MD_BASE + 1)
5851 #define OPTION_DIVIDE (OPTION_MD_BASE + 2)
5852 #define OPTION_MARCH (OPTION_MD_BASE + 3)
5853 #define OPTION_MTUNE (OPTION_MD_BASE + 4)
5855 struct option md_longopts
[] =
5857 {"32", no_argument
, NULL
, OPTION_32
},
5858 #if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF) || defined(TE_PEP)
5859 {"64", no_argument
, NULL
, OPTION_64
},
5861 {"divide", no_argument
, NULL
, OPTION_DIVIDE
},
5862 {"march", required_argument
, NULL
, OPTION_MARCH
},
5863 {"mtune", required_argument
, NULL
, OPTION_MTUNE
},
5864 {NULL
, no_argument
, NULL
, 0}
5866 size_t md_longopts_size
= sizeof (md_longopts
);
5869 md_parse_option (int c
, char *arg
)
5876 optimize_align_code
= 0;
5883 #if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
5884 /* -Qy, -Qn: SVR4 arguments controlling whether a .comment section
5885 should be emitted or not. FIXME: Not implemented. */
5889 /* -V: SVR4 argument to print version ID. */
5891 print_version_id ();
5894 /* -k: Ignore for FreeBSD compatibility. */
5899 /* -s: On i386 Solaris, this tells the native assembler to use
5900 .stab instead of .stab.excl. We always use .stab anyhow. */
5903 #if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF) || defined(TE_PEP)
5906 const char **list
, **l
;
5908 list
= bfd_target_list ();
5909 for (l
= list
; *l
!= NULL
; l
++)
5910 if (CONST_STRNEQ (*l
, "elf64-x86-64")
5911 || strcmp (*l
, "coff-x86-64") == 0
5912 || strcmp (*l
, "pe-x86-64") == 0
5913 || strcmp (*l
, "pei-x86-64") == 0)
5915 default_arch
= "x86_64";
5919 as_fatal (_("No compiled in support for x86_64"));
5926 default_arch
= "i386";
5930 #ifdef SVR4_COMMENT_CHARS
5935 n
= (char *) xmalloc (strlen (i386_comment_chars
) + 1);
5937 for (s
= i386_comment_chars
; *s
!= '\0'; s
++)
5941 i386_comment_chars
= n
;
5948 as_fatal (_("Invalid -march= option: `%s'"), arg
);
5949 for (i
= 0; i
< ARRAY_SIZE (cpu_arch
); i
++)
5951 if (strcmp (arg
, cpu_arch
[i
].name
) == 0)
5953 cpu_arch_isa
= cpu_arch
[i
].type
;
5954 cpu_arch_isa_flags
= cpu_arch
[i
].flags
;
5955 if (!cpu_arch_tune_set
)
5957 cpu_arch_tune
= cpu_arch_isa
;
5958 cpu_arch_tune_flags
= cpu_arch_isa_flags
;
5963 if (i
>= ARRAY_SIZE (cpu_arch
))
5964 as_fatal (_("Invalid -march= option: `%s'"), arg
);
5969 as_fatal (_("Invalid -mtune= option: `%s'"), arg
);
5970 for (i
= 0; i
< ARRAY_SIZE (cpu_arch
); i
++)
5972 if (strcmp (arg
, cpu_arch
[i
].name
) == 0)
5974 cpu_arch_tune_set
= 1;
5975 cpu_arch_tune
= cpu_arch
[i
].type
;
5976 cpu_arch_tune_flags
= cpu_arch
[i
].flags
;
5980 if (i
>= ARRAY_SIZE (cpu_arch
))
5981 as_fatal (_("Invalid -mtune= option: `%s'"), arg
);
5991 md_show_usage (stream
)
5994 #if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
5995 fprintf (stream
, _("\
5997 -V print assembler version number\n\
6000 fprintf (stream
, _("\
6001 -n Do not optimize code alignment\n\
6002 -q quieten some warnings\n"));
6003 #if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
6004 fprintf (stream
, _("\
6007 #if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF) || defined(TE_PEP)
6008 fprintf (stream
, _("\
6009 --32/--64 generate 32bit/64bit code\n"));
6011 #ifdef SVR4_COMMENT_CHARS
6012 fprintf (stream
, _("\
6013 --divide do not treat `/' as a comment character\n"));
6015 fprintf (stream
, _("\
6016 --divide ignored\n"));
6018 fprintf (stream
, _("\
6019 -march=CPU/-mtune=CPU generate code/optimize for CPU, where CPU is one of:\n\
6020 i386, i486, pentium, pentiumpro, pentium4, nocona,\n\
6021 core, core2, k6, athlon, k8, generic32, generic64\n"));
6027 x86_64_target_format (void)
6029 if (strcmp (default_arch
, "x86_64") == 0)
6031 set_code_flag (CODE_64BIT
);
6032 return COFF_TARGET_FORMAT
;
6034 else if (strcmp (default_arch
, "i386") == 0)
6036 set_code_flag (CODE_32BIT
);
6040 as_fatal (_("Unknown architecture"));
6045 #if ((defined (OBJ_MAYBE_COFF) && defined (OBJ_MAYBE_AOUT)) \
6046 || defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF))
6048 /* Pick the target format to use. */
6051 i386_target_format (void)
6053 if (!strcmp (default_arch
, "x86_64"))
6055 set_code_flag (CODE_64BIT
);
6056 if (cpu_arch_isa_flags
== 0)
6057 cpu_arch_isa_flags
= Cpu186
|Cpu286
|Cpu386
|Cpu486
6058 |Cpu586
|Cpu686
|CpuP4
|CpuMMX
|CpuMMX2
6060 if (cpu_arch_tune_flags
== 0)
6061 cpu_arch_tune_flags
= Cpu186
|Cpu286
|Cpu386
|Cpu486
6062 |Cpu586
|Cpu686
|CpuP4
|CpuMMX
|CpuMMX2
6065 else if (!strcmp (default_arch
, "i386"))
6067 set_code_flag (CODE_32BIT
);
6068 if (cpu_arch_isa_flags
== 0)
6069 cpu_arch_isa_flags
= Cpu186
|Cpu286
|Cpu386
;
6070 if (cpu_arch_tune_flags
== 0)
6071 cpu_arch_tune_flags
= Cpu186
|Cpu286
|Cpu386
;
6074 as_fatal (_("Unknown architecture"));
6075 switch (OUTPUT_FLAVOR
)
6077 #ifdef OBJ_MAYBE_AOUT
6078 case bfd_target_aout_flavour
:
6079 return AOUT_TARGET_FORMAT
;
6081 #ifdef OBJ_MAYBE_COFF
6082 case bfd_target_coff_flavour
:
6085 #if defined (OBJ_MAYBE_ELF) || defined (OBJ_ELF)
6086 case bfd_target_elf_flavour
:
6088 if (flag_code
== CODE_64BIT
)
6091 use_rela_relocations
= 1;
6093 return flag_code
== CODE_64BIT
? ELF_TARGET_FORMAT64
: ELF_TARGET_FORMAT
;
6102 #endif /* OBJ_MAYBE_ more than one */
6104 #if (defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF))
6106 i386_elf_emit_arch_note (void)
6108 if (IS_ELF
&& cpu_arch_name
!= NULL
)
6111 asection
*seg
= now_seg
;
6112 subsegT subseg
= now_subseg
;
6113 Elf_Internal_Note i_note
;
6114 Elf_External_Note e_note
;
6115 asection
*note_secp
;
6118 /* Create the .note section. */
6119 note_secp
= subseg_new (".note", 0);
6120 bfd_set_section_flags (stdoutput
,
6122 SEC_HAS_CONTENTS
| SEC_READONLY
);
6124 /* Process the arch string. */
6125 len
= strlen (cpu_arch_name
);
6127 i_note
.namesz
= len
+ 1;
6129 i_note
.type
= NT_ARCH
;
6130 p
= frag_more (sizeof (e_note
.namesz
));
6131 md_number_to_chars (p
, (valueT
) i_note
.namesz
, sizeof (e_note
.namesz
));
6132 p
= frag_more (sizeof (e_note
.descsz
));
6133 md_number_to_chars (p
, (valueT
) i_note
.descsz
, sizeof (e_note
.descsz
));
6134 p
= frag_more (sizeof (e_note
.type
));
6135 md_number_to_chars (p
, (valueT
) i_note
.type
, sizeof (e_note
.type
));
6136 p
= frag_more (len
+ 1);
6137 strcpy (p
, cpu_arch_name
);
6139 frag_align (2, 0, 0);
6141 subseg_set (seg
, subseg
);
6147 md_undefined_symbol (name
)
6150 if (name
[0] == GLOBAL_OFFSET_TABLE_NAME
[0]
6151 && name
[1] == GLOBAL_OFFSET_TABLE_NAME
[1]
6152 && name
[2] == GLOBAL_OFFSET_TABLE_NAME
[2]
6153 && strcmp (name
, GLOBAL_OFFSET_TABLE_NAME
) == 0)
6157 if (symbol_find (name
))
6158 as_bad (_("GOT already in symbol table"));
6159 GOT_symbol
= symbol_new (name
, undefined_section
,
6160 (valueT
) 0, &zero_address_frag
);
6167 /* Round up a section size to the appropriate boundary. */
6170 md_section_align (segment
, size
)
6171 segT segment ATTRIBUTE_UNUSED
;
6174 #if (defined (OBJ_AOUT) || defined (OBJ_MAYBE_AOUT))
6175 if (OUTPUT_FLAVOR
== bfd_target_aout_flavour
)
6177 /* For a.out, force the section size to be aligned. If we don't do
6178 this, BFD will align it for us, but it will not write out the
6179 final bytes of the section. This may be a bug in BFD, but it is
6180 easier to fix it here since that is how the other a.out targets
6184 align
= bfd_get_section_alignment (stdoutput
, segment
);
6185 size
= ((size
+ (1 << align
) - 1) & ((valueT
) -1 << align
));
6192 /* On the i386, PC-relative offsets are relative to the start of the
6193 next instruction. That is, the address of the offset, plus its
6194 size, since the offset is always the last part of the insn. */
6197 md_pcrel_from (fixS
*fixP
)
6199 return fixP
->fx_size
+ fixP
->fx_where
+ fixP
->fx_frag
->fr_address
;
6205 s_bss (int ignore ATTRIBUTE_UNUSED
)
6209 #if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
6211 obj_elf_section_change_hook ();
6213 temp
= get_absolute_expression ();
6214 subseg_set (bss_section
, (subsegT
) temp
);
6215 demand_empty_rest_of_line ();
6221 i386_validate_fix (fixS
*fixp
)
6223 if (fixp
->fx_subsy
&& fixp
->fx_subsy
== GOT_symbol
)
6225 if (fixp
->fx_r_type
== BFD_RELOC_32_PCREL
)
6229 fixp
->fx_r_type
= BFD_RELOC_X86_64_GOTPCREL
;
6234 fixp
->fx_r_type
= BFD_RELOC_386_GOTOFF
;
6236 fixp
->fx_r_type
= BFD_RELOC_X86_64_GOTOFF64
;
6243 tc_gen_reloc (section
, fixp
)
6244 asection
*section ATTRIBUTE_UNUSED
;
6248 bfd_reloc_code_real_type code
;
6250 switch (fixp
->fx_r_type
)
6252 case BFD_RELOC_X86_64_PLT32
:
6253 case BFD_RELOC_X86_64_GOT32
:
6254 case BFD_RELOC_X86_64_GOTPCREL
:
6255 case BFD_RELOC_386_PLT32
:
6256 case BFD_RELOC_386_GOT32
:
6257 case BFD_RELOC_386_GOTOFF
:
6258 case BFD_RELOC_386_GOTPC
:
6259 case BFD_RELOC_386_TLS_GD
:
6260 case BFD_RELOC_386_TLS_LDM
:
6261 case BFD_RELOC_386_TLS_LDO_32
:
6262 case BFD_RELOC_386_TLS_IE_32
:
6263 case BFD_RELOC_386_TLS_IE
:
6264 case BFD_RELOC_386_TLS_GOTIE
:
6265 case BFD_RELOC_386_TLS_LE_32
:
6266 case BFD_RELOC_386_TLS_LE
:
6267 case BFD_RELOC_386_TLS_GOTDESC
:
6268 case BFD_RELOC_386_TLS_DESC_CALL
:
6269 case BFD_RELOC_X86_64_TLSGD
:
6270 case BFD_RELOC_X86_64_TLSLD
:
6271 case BFD_RELOC_X86_64_DTPOFF32
:
6272 case BFD_RELOC_X86_64_DTPOFF64
:
6273 case BFD_RELOC_X86_64_GOTTPOFF
:
6274 case BFD_RELOC_X86_64_TPOFF32
:
6275 case BFD_RELOC_X86_64_TPOFF64
:
6276 case BFD_RELOC_X86_64_GOTOFF64
:
6277 case BFD_RELOC_X86_64_GOTPC32
:
6278 case BFD_RELOC_X86_64_GOT64
:
6279 case BFD_RELOC_X86_64_GOTPCREL64
:
6280 case BFD_RELOC_X86_64_GOTPC64
:
6281 case BFD_RELOC_X86_64_GOTPLT64
:
6282 case BFD_RELOC_X86_64_PLTOFF64
:
6283 case BFD_RELOC_X86_64_GOTPC32_TLSDESC
:
6284 case BFD_RELOC_X86_64_TLSDESC_CALL
:
6286 case BFD_RELOC_VTABLE_ENTRY
:
6287 case BFD_RELOC_VTABLE_INHERIT
:
6289 case BFD_RELOC_32_SECREL
:
6291 code
= fixp
->fx_r_type
;
6293 case BFD_RELOC_X86_64_32S
:
6294 if (!fixp
->fx_pcrel
)
6296 /* Don't turn BFD_RELOC_X86_64_32S into BFD_RELOC_32. */
6297 code
= fixp
->fx_r_type
;
6303 switch (fixp
->fx_size
)
6306 as_bad_where (fixp
->fx_file
, fixp
->fx_line
,
6307 _("can not do %d byte pc-relative relocation"),
6309 code
= BFD_RELOC_32_PCREL
;
6311 case 1: code
= BFD_RELOC_8_PCREL
; break;
6312 case 2: code
= BFD_RELOC_16_PCREL
; break;
6313 case 4: code
= BFD_RELOC_32_PCREL
; break;
6315 case 8: code
= BFD_RELOC_64_PCREL
; break;
6321 switch (fixp
->fx_size
)
6324 as_bad_where (fixp
->fx_file
, fixp
->fx_line
,
6325 _("can not do %d byte relocation"),
6327 code
= BFD_RELOC_32
;
6329 case 1: code
= BFD_RELOC_8
; break;
6330 case 2: code
= BFD_RELOC_16
; break;
6331 case 4: code
= BFD_RELOC_32
; break;
6333 case 8: code
= BFD_RELOC_64
; break;
6340 if ((code
== BFD_RELOC_32
6341 || code
== BFD_RELOC_32_PCREL
6342 || code
== BFD_RELOC_X86_64_32S
)
6344 && fixp
->fx_addsy
== GOT_symbol
)
6347 code
= BFD_RELOC_386_GOTPC
;
6349 code
= BFD_RELOC_X86_64_GOTPC32
;
6351 if ((code
== BFD_RELOC_64
|| code
== BFD_RELOC_64_PCREL
)
6353 && fixp
->fx_addsy
== GOT_symbol
)
6355 code
= BFD_RELOC_X86_64_GOTPC64
;
6358 rel
= (arelent
*) xmalloc (sizeof (arelent
));
6359 rel
->sym_ptr_ptr
= (asymbol
**) xmalloc (sizeof (asymbol
*));
6360 *rel
->sym_ptr_ptr
= symbol_get_bfdsym (fixp
->fx_addsy
);
6362 rel
->address
= fixp
->fx_frag
->fr_address
+ fixp
->fx_where
;
6364 if (!use_rela_relocations
)
6366 /* HACK: Since i386 ELF uses Rel instead of Rela, encode the
6367 vtable entry to be used in the relocation's section offset. */
6368 if (fixp
->fx_r_type
== BFD_RELOC_VTABLE_ENTRY
)
6369 rel
->address
= fixp
->fx_offset
;
6373 /* Use the rela in 64bit mode. */
6376 if (!fixp
->fx_pcrel
)
6377 rel
->addend
= fixp
->fx_offset
;
6381 case BFD_RELOC_X86_64_PLT32
:
6382 case BFD_RELOC_X86_64_GOT32
:
6383 case BFD_RELOC_X86_64_GOTPCREL
:
6384 case BFD_RELOC_X86_64_TLSGD
:
6385 case BFD_RELOC_X86_64_TLSLD
:
6386 case BFD_RELOC_X86_64_GOTTPOFF
:
6387 case BFD_RELOC_X86_64_GOTPC32_TLSDESC
:
6388 case BFD_RELOC_X86_64_TLSDESC_CALL
:
6389 rel
->addend
= fixp
->fx_offset
- fixp
->fx_size
;
6392 rel
->addend
= (section
->vma
6394 + fixp
->fx_addnumber
6395 + md_pcrel_from (fixp
));
6400 rel
->howto
= bfd_reloc_type_lookup (stdoutput
, code
);
6401 if (rel
->howto
== NULL
)
6403 as_bad_where (fixp
->fx_file
, fixp
->fx_line
,
6404 _("cannot represent relocation type %s"),
6405 bfd_get_reloc_code_name (code
));
6406 /* Set howto to a garbage value so that we can keep going. */
6407 rel
->howto
= bfd_reloc_type_lookup (stdoutput
, BFD_RELOC_32
);
6408 assert (rel
->howto
!= NULL
);
6415 /* Parse operands using Intel syntax. This implements a recursive descent
6416 parser based on the BNF grammar published in Appendix B of the MASM 6.1
6419 FIXME: We do not recognize the full operand grammar defined in the MASM
6420 documentation. In particular, all the structure/union and
6421 high-level macro operands are missing.
6423 Uppercase words are terminals, lower case words are non-terminals.
6424 Objects surrounded by double brackets '[[' ']]' are optional. Vertical
6425 bars '|' denote choices. Most grammar productions are implemented in
6426 functions called 'intel_<production>'.
6428 Initial production is 'expr'.
6434 binOp & | AND | \| | OR | ^ | XOR
6436 byteRegister AL | AH | BL | BH | CL | CH | DL | DH
6438 constant digits [[ radixOverride ]]
6440 dataType BYTE | WORD | DWORD | FWORD | QWORD | TBYTE | OWORD | XMMWORD
6478 => expr expr cmpOp e04
6481 gpRegister AX | EAX | BX | EBX | CX | ECX | DX | EDX
6482 | BP | EBP | SP | ESP | DI | EDI | SI | ESI
6484 hexdigit a | b | c | d | e | f
6485 | A | B | C | D | E | F
6491 mulOp * | / | % | MOD | << | SHL | >> | SHR
6495 register specialRegister
6499 segmentRegister CS | DS | ES | FS | GS | SS
6501 specialRegister CR0 | CR2 | CR3 | CR4
6502 | DR0 | DR1 | DR2 | DR3 | DR6 | DR7
6503 | TR3 | TR4 | TR5 | TR6 | TR7
6505 We simplify the grammar in obvious places (e.g., register parsing is
6506 done by calling parse_register) and eliminate immediate left recursion
6507 to implement a recursive-descent parser.
6511 expr' cmpOp e04 expr'
6562 /* Parsing structure for the intel syntax parser. Used to implement the
6563 semantic actions for the operand grammar. */
6564 struct intel_parser_s
6566 char *op_string
; /* The string being parsed. */
6567 int got_a_float
; /* Whether the operand is a float. */
6568 int op_modifier
; /* Operand modifier. */
6569 int is_mem
; /* 1 if operand is memory reference. */
6570 int in_offset
; /* >=1 if parsing operand of offset. */
6571 int in_bracket
; /* >=1 if parsing operand in brackets. */
6572 const reg_entry
*reg
; /* Last register reference found. */
6573 char *disp
; /* Displacement string being built. */
6574 char *next_operand
; /* Resume point when splitting operands. */
6577 static struct intel_parser_s intel_parser
;
6579 /* Token structure for parsing intel syntax. */
6582 int code
; /* Token code. */
6583 const reg_entry
*reg
; /* Register entry for register tokens. */
6584 char *str
; /* String representation. */
6587 static struct intel_token cur_token
, prev_token
;
6589 /* Token codes for the intel parser. Since T_SHORT is already used
6590 by COFF, undefine it first to prevent a warning. */
6609 /* Prototypes for intel parser functions. */
6610 static int intel_match_token (int);
6611 static void intel_putback_token (void);
6612 static void intel_get_token (void);
6613 static int intel_expr (void);
6614 static int intel_e04 (void);
6615 static int intel_e05 (void);
6616 static int intel_e06 (void);
6617 static int intel_e09 (void);
6618 static int intel_e10 (void);
6619 static int intel_e11 (void);
6622 i386_intel_operand (char *operand_string
, int got_a_float
)
6627 p
= intel_parser
.op_string
= xstrdup (operand_string
);
6628 intel_parser
.disp
= (char *) xmalloc (strlen (operand_string
) + 1);
6632 /* Initialize token holders. */
6633 cur_token
.code
= prev_token
.code
= T_NIL
;
6634 cur_token
.reg
= prev_token
.reg
= NULL
;
6635 cur_token
.str
= prev_token
.str
= NULL
;
6637 /* Initialize parser structure. */
6638 intel_parser
.got_a_float
= got_a_float
;
6639 intel_parser
.op_modifier
= 0;
6640 intel_parser
.is_mem
= 0;
6641 intel_parser
.in_offset
= 0;
6642 intel_parser
.in_bracket
= 0;
6643 intel_parser
.reg
= NULL
;
6644 intel_parser
.disp
[0] = '\0';
6645 intel_parser
.next_operand
= NULL
;
6647 /* Read the first token and start the parser. */
6649 ret
= intel_expr ();
6654 if (cur_token
.code
!= T_NIL
)
6656 as_bad (_("invalid operand for '%s' ('%s' unexpected)"),
6657 current_templates
->start
->name
, cur_token
.str
);
6660 /* If we found a memory reference, hand it over to i386_displacement
6661 to fill in the rest of the operand fields. */
6662 else if (intel_parser
.is_mem
)
6664 if ((i
.mem_operands
== 1
6665 && (current_templates
->start
->opcode_modifier
& IsString
) == 0)
6666 || i
.mem_operands
== 2)
6668 as_bad (_("too many memory references for '%s'"),
6669 current_templates
->start
->name
);
6674 char *s
= intel_parser
.disp
;
6677 if (!quiet_warnings
&& intel_parser
.is_mem
< 0)
6678 /* See the comments in intel_bracket_expr. */
6679 as_warn (_("Treating `%s' as memory reference"), operand_string
);
6681 /* Add the displacement expression. */
6683 ret
= i386_displacement (s
, s
+ strlen (s
));
6686 /* Swap base and index in 16-bit memory operands like
6687 [si+bx]. Since i386_index_check is also used in AT&T
6688 mode we have to do that here. */
6691 && (i
.base_reg
->reg_type
& Reg16
)
6692 && (i
.index_reg
->reg_type
& Reg16
)
6693 && i
.base_reg
->reg_num
>= 6
6694 && i
.index_reg
->reg_num
< 6)
6696 const reg_entry
*base
= i
.index_reg
;
6698 i
.index_reg
= i
.base_reg
;
6701 ret
= i386_index_check (operand_string
);
6706 /* Constant and OFFSET expressions are handled by i386_immediate. */
6707 else if ((intel_parser
.op_modifier
& (1 << T_OFFSET
))
6708 || intel_parser
.reg
== NULL
)
6709 ret
= i386_immediate (intel_parser
.disp
);
6711 if (intel_parser
.next_operand
&& this_operand
>= MAX_OPERANDS
- 1)
6713 if (!ret
|| !intel_parser
.next_operand
)
6715 intel_parser
.op_string
= intel_parser
.next_operand
;
6716 this_operand
= i
.operands
++;
6720 free (intel_parser
.disp
);
6725 #define NUM_ADDRESS_REGS (!!i.base_reg + !!i.index_reg)
6729 expr' cmpOp e04 expr'
6734 /* XXX Implement the comparison operators. */
6735 return intel_e04 ();
6752 if (nregs
>= 0 && NUM_ADDRESS_REGS
> nregs
)
6753 i
.base_reg
= i386_regtab
+ REGNAM_AL
; /* al is invalid as base */
6755 if (cur_token
.code
== '+')
6757 else if (cur_token
.code
== '-')
6758 nregs
= NUM_ADDRESS_REGS
;
6762 strcat (intel_parser
.disp
, cur_token
.str
);
6763 intel_match_token (cur_token
.code
);
6774 int nregs
= ~NUM_ADDRESS_REGS
;
6781 if (cur_token
.code
== '&'
6782 || cur_token
.code
== '|'
6783 || cur_token
.code
== '^')
6787 str
[0] = cur_token
.code
;
6789 strcat (intel_parser
.disp
, str
);
6794 intel_match_token (cur_token
.code
);
6799 if (nregs
>= 0 && NUM_ADDRESS_REGS
> nregs
)
6800 i
.base_reg
= i386_regtab
+ REGNAM_AL
+ 1; /* cl is invalid as base */
6811 int nregs
= ~NUM_ADDRESS_REGS
;
6818 if (cur_token
.code
== '*'
6819 || cur_token
.code
== '/'
6820 || cur_token
.code
== '%')
6824 str
[0] = cur_token
.code
;
6826 strcat (intel_parser
.disp
, str
);
6828 else if (cur_token
.code
== T_SHL
)
6829 strcat (intel_parser
.disp
, "<<");
6830 else if (cur_token
.code
== T_SHR
)
6831 strcat (intel_parser
.disp
, ">>");
6835 intel_match_token (cur_token
.code
);
6840 if (nregs
>= 0 && NUM_ADDRESS_REGS
> nregs
)
6841 i
.base_reg
= i386_regtab
+ REGNAM_AL
+ 2; /* dl is invalid as base */
6859 int nregs
= ~NUM_ADDRESS_REGS
;
6864 /* Don't consume constants here. */
6865 if (cur_token
.code
== '+' || cur_token
.code
== '-')
6867 /* Need to look one token ahead - if the next token
6868 is a constant, the current token is its sign. */
6871 intel_match_token (cur_token
.code
);
6872 next_code
= cur_token
.code
;
6873 intel_putback_token ();
6874 if (next_code
== T_CONST
)
6878 /* e09 OFFSET e09 */
6879 if (cur_token
.code
== T_OFFSET
)
6882 ++intel_parser
.in_offset
;
6886 else if (cur_token
.code
== T_SHORT
)
6887 intel_parser
.op_modifier
|= 1 << T_SHORT
;
6890 else if (cur_token
.code
== '+')
6891 strcat (intel_parser
.disp
, "+");
6896 else if (cur_token
.code
== '-' || cur_token
.code
== '~')
6902 str
[0] = cur_token
.code
;
6904 strcat (intel_parser
.disp
, str
);
6911 intel_match_token (cur_token
.code
);
6919 /* e09' PTR e10 e09' */
6920 if (cur_token
.code
== T_PTR
)
6924 if (prev_token
.code
== T_BYTE
)
6925 suffix
= BYTE_MNEM_SUFFIX
;
6927 else if (prev_token
.code
== T_WORD
)
6929 if (current_templates
->start
->name
[0] == 'l'
6930 && current_templates
->start
->name
[2] == 's'
6931 && current_templates
->start
->name
[3] == 0)
6932 suffix
= BYTE_MNEM_SUFFIX
; /* so it will cause an error */
6933 else if (intel_parser
.got_a_float
== 2) /* "fi..." */
6934 suffix
= SHORT_MNEM_SUFFIX
;
6936 suffix
= WORD_MNEM_SUFFIX
;
6939 else if (prev_token
.code
== T_DWORD
)
6941 if (current_templates
->start
->name
[0] == 'l'
6942 && current_templates
->start
->name
[2] == 's'
6943 && current_templates
->start
->name
[3] == 0)
6944 suffix
= WORD_MNEM_SUFFIX
;
6945 else if (flag_code
== CODE_16BIT
6946 && (current_templates
->start
->opcode_modifier
6947 & (Jump
| JumpDword
)))
6948 suffix
= LONG_DOUBLE_MNEM_SUFFIX
;
6949 else if (intel_parser
.got_a_float
== 1) /* "f..." */
6950 suffix
= SHORT_MNEM_SUFFIX
;
6952 suffix
= LONG_MNEM_SUFFIX
;
6955 else if (prev_token
.code
== T_FWORD
)
6957 if (current_templates
->start
->name
[0] == 'l'
6958 && current_templates
->start
->name
[2] == 's'
6959 && current_templates
->start
->name
[3] == 0)
6960 suffix
= LONG_MNEM_SUFFIX
;
6961 else if (!intel_parser
.got_a_float
)
6963 if (flag_code
== CODE_16BIT
)
6964 add_prefix (DATA_PREFIX_OPCODE
);
6965 suffix
= LONG_DOUBLE_MNEM_SUFFIX
;
6968 suffix
= BYTE_MNEM_SUFFIX
; /* so it will cause an error */
6971 else if (prev_token
.code
== T_QWORD
)
6973 if (intel_parser
.got_a_float
== 1) /* "f..." */
6974 suffix
= LONG_MNEM_SUFFIX
;
6976 suffix
= QWORD_MNEM_SUFFIX
;
6979 else if (prev_token
.code
== T_TBYTE
)
6981 if (intel_parser
.got_a_float
== 1)
6982 suffix
= LONG_DOUBLE_MNEM_SUFFIX
;
6984 suffix
= BYTE_MNEM_SUFFIX
; /* so it will cause an error */
6987 else if (prev_token
.code
== T_XMMWORD
)
6989 /* XXX ignored for now, but accepted since gcc uses it */
6995 as_bad (_("Unknown operand modifier `%s'"), prev_token
.str
);
6999 /* Operands for jump/call using 'ptr' notation denote absolute
7001 if (current_templates
->start
->opcode_modifier
& (Jump
| JumpDword
))
7002 i
.types
[this_operand
] |= JumpAbsolute
;
7004 if (current_templates
->start
->base_opcode
== 0x8d /* lea */)
7008 else if (i
.suffix
!= suffix
)
7010 as_bad (_("Conflicting operand modifiers"));
7016 /* e09' : e10 e09' */
7017 else if (cur_token
.code
== ':')
7019 if (prev_token
.code
!= T_REG
)
7021 /* While {call,jmp} SSSS:OOOO is MASM syntax only when SSSS is a
7022 segment/group identifier (which we don't have), using comma
7023 as the operand separator there is even less consistent, since
7024 there all branches only have a single operand. */
7025 if (this_operand
!= 0
7026 || intel_parser
.in_offset
7027 || intel_parser
.in_bracket
7028 || (!(current_templates
->start
->opcode_modifier
7029 & (Jump
|JumpDword
|JumpInterSegment
))
7030 && !(current_templates
->start
->operand_types
[0]
7032 return intel_match_token (T_NIL
);
7033 /* Remember the start of the 2nd operand and terminate 1st
7035 XXX This isn't right, yet (when SSSS:OOOO is right operand of
7036 another expression), but it gets at least the simplest case
7037 (a plain number or symbol on the left side) right. */
7038 intel_parser
.next_operand
= intel_parser
.op_string
;
7039 *--intel_parser
.op_string
= '\0';
7040 return intel_match_token (':');
7048 intel_match_token (cur_token
.code
);
7054 --intel_parser
.in_offset
;
7057 if (NUM_ADDRESS_REGS
> nregs
)
7059 as_bad (_("Invalid operand to `OFFSET'"));
7062 intel_parser
.op_modifier
|= 1 << T_OFFSET
;
7065 if (nregs
>= 0 && NUM_ADDRESS_REGS
> nregs
)
7066 i
.base_reg
= i386_regtab
+ REGNAM_AL
+ 3; /* bl is invalid as base */
7071 intel_bracket_expr (void)
7073 int was_offset
= intel_parser
.op_modifier
& (1 << T_OFFSET
);
7074 const char *start
= intel_parser
.op_string
;
7077 if (i
.op
[this_operand
].regs
)
7078 return intel_match_token (T_NIL
);
7080 intel_match_token ('[');
7082 /* Mark as a memory operand only if it's not already known to be an
7083 offset expression. If it's an offset expression, we need to keep
7085 if (!intel_parser
.in_offset
)
7087 ++intel_parser
.in_bracket
;
7089 /* Operands for jump/call inside brackets denote absolute addresses. */
7090 if (current_templates
->start
->opcode_modifier
& (Jump
| JumpDword
))
7091 i
.types
[this_operand
] |= JumpAbsolute
;
7093 /* Unfortunately gas always diverged from MASM in a respect that can't
7094 be easily fixed without risking to break code sequences likely to be
7095 encountered (the testsuite even check for this): MASM doesn't consider
7096 an expression inside brackets unconditionally as a memory reference.
7097 When that is e.g. a constant, an offset expression, or the sum of the
7098 two, this is still taken as a constant load. gas, however, always
7099 treated these as memory references. As a compromise, we'll try to make
7100 offset expressions inside brackets work the MASM way (since that's
7101 less likely to be found in real world code), but make constants alone
7102 continue to work the traditional gas way. In either case, issue a
7104 intel_parser
.op_modifier
&= ~was_offset
;
7107 strcat (intel_parser
.disp
, "[");
7109 /* Add a '+' to the displacement string if necessary. */
7110 if (*intel_parser
.disp
!= '\0'
7111 && *(intel_parser
.disp
+ strlen (intel_parser
.disp
) - 1) != '+')
7112 strcat (intel_parser
.disp
, "+");
7115 && (len
= intel_parser
.op_string
- start
- 1,
7116 intel_match_token (']')))
7118 /* Preserve brackets when the operand is an offset expression. */
7119 if (intel_parser
.in_offset
)
7120 strcat (intel_parser
.disp
, "]");
7123 --intel_parser
.in_bracket
;
7124 if (i
.base_reg
|| i
.index_reg
)
7125 intel_parser
.is_mem
= 1;
7126 if (!intel_parser
.is_mem
)
7128 if (!(intel_parser
.op_modifier
& (1 << T_OFFSET
)))
7129 /* Defer the warning until all of the operand was parsed. */
7130 intel_parser
.is_mem
= -1;
7131 else if (!quiet_warnings
)
7132 as_warn (_("`[%.*s]' taken to mean just `%.*s'"),
7133 len
, start
, len
, start
);
7136 intel_parser
.op_modifier
|= was_offset
;
7153 while (cur_token
.code
== '[')
7155 if (!intel_bracket_expr ())
7180 switch (cur_token
.code
)
7184 intel_match_token ('(');
7185 strcat (intel_parser
.disp
, "(");
7187 if (intel_expr () && intel_match_token (')'))
7189 strcat (intel_parser
.disp
, ")");
7196 return intel_bracket_expr ();
7201 strcat (intel_parser
.disp
, cur_token
.str
);
7202 intel_match_token (cur_token
.code
);
7204 /* Mark as a memory operand only if it's not already known to be an
7205 offset expression. */
7206 if (!intel_parser
.in_offset
)
7207 intel_parser
.is_mem
= 1;
7214 const reg_entry
*reg
= intel_parser
.reg
= cur_token
.reg
;
7216 intel_match_token (T_REG
);
7218 /* Check for segment change. */
7219 if (cur_token
.code
== ':')
7221 if (!(reg
->reg_type
& (SReg2
| SReg3
)))
7223 as_bad (_("`%s' is not a valid segment register"),
7227 else if (i
.seg
[i
.mem_operands
])
7228 as_warn (_("Extra segment override ignored"));
7231 if (!intel_parser
.in_offset
)
7232 intel_parser
.is_mem
= 1;
7233 switch (reg
->reg_num
)
7236 i
.seg
[i
.mem_operands
] = &es
;
7239 i
.seg
[i
.mem_operands
] = &cs
;
7242 i
.seg
[i
.mem_operands
] = &ss
;
7245 i
.seg
[i
.mem_operands
] = &ds
;
7248 i
.seg
[i
.mem_operands
] = &fs
;
7251 i
.seg
[i
.mem_operands
] = &gs
;
7257 /* Not a segment register. Check for register scaling. */
7258 else if (cur_token
.code
== '*')
7260 if (!intel_parser
.in_bracket
)
7262 as_bad (_("Register scaling only allowed in memory operands"));
7266 if (reg
->reg_type
& Reg16
) /* Disallow things like [si*1]. */
7267 reg
= i386_regtab
+ REGNAM_AX
+ 4; /* sp is invalid as index */
7268 else if (i
.index_reg
)
7269 reg
= i386_regtab
+ REGNAM_EAX
+ 4; /* esp is invalid as index */
7271 /* What follows must be a valid scale. */
7272 intel_match_token ('*');
7274 i
.types
[this_operand
] |= BaseIndex
;
7276 /* Set the scale after setting the register (otherwise,
7277 i386_scale will complain) */
7278 if (cur_token
.code
== '+' || cur_token
.code
== '-')
7280 char *str
, sign
= cur_token
.code
;
7281 intel_match_token (cur_token
.code
);
7282 if (cur_token
.code
!= T_CONST
)
7284 as_bad (_("Syntax error: Expecting a constant, got `%s'"),
7288 str
= (char *) xmalloc (strlen (cur_token
.str
) + 2);
7289 strcpy (str
+ 1, cur_token
.str
);
7291 if (!i386_scale (str
))
7295 else if (!i386_scale (cur_token
.str
))
7297 intel_match_token (cur_token
.code
);
7300 /* No scaling. If this is a memory operand, the register is either a
7301 base register (first occurrence) or an index register (second
7303 else if (intel_parser
.in_bracket
)
7308 else if (!i
.index_reg
)
7312 as_bad (_("Too many register references in memory operand"));
7316 i
.types
[this_operand
] |= BaseIndex
;
7319 /* It's neither base nor index. */
7320 else if (!intel_parser
.in_offset
&& !intel_parser
.is_mem
)
7322 i
.types
[this_operand
] |= reg
->reg_type
& ~BaseIndex
;
7323 i
.op
[this_operand
].regs
= reg
;
7328 as_bad (_("Invalid use of register"));
7332 /* Since registers are not part of the displacement string (except
7333 when we're parsing offset operands), we may need to remove any
7334 preceding '+' from the displacement string. */
7335 if (*intel_parser
.disp
!= '\0'
7336 && !intel_parser
.in_offset
)
7338 char *s
= intel_parser
.disp
;
7339 s
+= strlen (s
) - 1;
7362 intel_match_token (cur_token
.code
);
7364 if (cur_token
.code
== T_PTR
)
7367 /* It must have been an identifier. */
7368 intel_putback_token ();
7369 cur_token
.code
= T_ID
;
7375 if (!intel_parser
.in_offset
&& intel_parser
.is_mem
<= 0)
7379 /* The identifier represents a memory reference only if it's not
7380 preceded by an offset modifier and if it's not an equate. */
7381 symbolP
= symbol_find(cur_token
.str
);
7382 if (!symbolP
|| S_GET_SEGMENT(symbolP
) != absolute_section
)
7383 intel_parser
.is_mem
= 1;
7391 char *save_str
, sign
= 0;
7393 /* Allow constants that start with `+' or `-'. */
7394 if (cur_token
.code
== '-' || cur_token
.code
== '+')
7396 sign
= cur_token
.code
;
7397 intel_match_token (cur_token
.code
);
7398 if (cur_token
.code
!= T_CONST
)
7400 as_bad (_("Syntax error: Expecting a constant, got `%s'"),
7406 save_str
= (char *) xmalloc (strlen (cur_token
.str
) + 2);
7407 strcpy (save_str
+ !!sign
, cur_token
.str
);
7411 /* Get the next token to check for register scaling. */
7412 intel_match_token (cur_token
.code
);
7414 /* Check if this constant is a scaling factor for an
7416 if (cur_token
.code
== '*')
7418 if (intel_match_token ('*') && cur_token
.code
== T_REG
)
7420 const reg_entry
*reg
= cur_token
.reg
;
7422 if (!intel_parser
.in_bracket
)
7424 as_bad (_("Register scaling only allowed "
7425 "in memory operands"));
7429 /* Disallow things like [1*si].
7430 sp and esp are invalid as index. */
7431 if (reg
->reg_type
& Reg16
)
7432 reg
= i386_regtab
+ REGNAM_AX
+ 4;
7433 else if (i
.index_reg
)
7434 reg
= i386_regtab
+ REGNAM_EAX
+ 4;
7436 /* The constant is followed by `* reg', so it must be
7439 i
.types
[this_operand
] |= BaseIndex
;
7441 /* Set the scale after setting the register (otherwise,
7442 i386_scale will complain) */
7443 if (!i386_scale (save_str
))
7445 intel_match_token (T_REG
);
7447 /* Since registers are not part of the displacement
7448 string, we may need to remove any preceding '+' from
7449 the displacement string. */
7450 if (*intel_parser
.disp
!= '\0')
7452 char *s
= intel_parser
.disp
;
7453 s
+= strlen (s
) - 1;
7463 /* The constant was not used for register scaling. Since we have
7464 already consumed the token following `*' we now need to put it
7465 back in the stream. */
7466 intel_putback_token ();
7469 /* Add the constant to the displacement string. */
7470 strcat (intel_parser
.disp
, save_str
);
7477 as_bad (_("Unrecognized token '%s'"), cur_token
.str
);
7481 /* Match the given token against cur_token. If they match, read the next
7482 token from the operand string. */
7484 intel_match_token (int code
)
7486 if (cur_token
.code
== code
)
7493 as_bad (_("Unexpected token `%s'"), cur_token
.str
);
7498 /* Read a new token from intel_parser.op_string and store it in cur_token. */
7500 intel_get_token (void)
7503 const reg_entry
*reg
;
7504 struct intel_token new_token
;
7506 new_token
.code
= T_NIL
;
7507 new_token
.reg
= NULL
;
7508 new_token
.str
= NULL
;
7510 /* Free the memory allocated to the previous token and move
7511 cur_token to prev_token. */
7513 free (prev_token
.str
);
7515 prev_token
= cur_token
;
7517 /* Skip whitespace. */
7518 while (is_space_char (*intel_parser
.op_string
))
7519 intel_parser
.op_string
++;
7521 /* Return an empty token if we find nothing else on the line. */
7522 if (*intel_parser
.op_string
== '\0')
7524 cur_token
= new_token
;
7528 /* The new token cannot be larger than the remainder of the operand
7530 new_token
.str
= (char *) xmalloc (strlen (intel_parser
.op_string
) + 1);
7531 new_token
.str
[0] = '\0';
7533 if (strchr ("0123456789", *intel_parser
.op_string
))
7535 char *p
= new_token
.str
;
7536 char *q
= intel_parser
.op_string
;
7537 new_token
.code
= T_CONST
;
7539 /* Allow any kind of identifier char to encompass floating point and
7540 hexadecimal numbers. */
7541 while (is_identifier_char (*q
))
7545 /* Recognize special symbol names [0-9][bf]. */
7546 if (strlen (intel_parser
.op_string
) == 2
7547 && (intel_parser
.op_string
[1] == 'b'
7548 || intel_parser
.op_string
[1] == 'f'))
7549 new_token
.code
= T_ID
;
7552 else if ((reg
= parse_register (intel_parser
.op_string
, &end_op
)) != NULL
)
7554 size_t len
= end_op
- intel_parser
.op_string
;
7556 new_token
.code
= T_REG
;
7557 new_token
.reg
= reg
;
7559 memcpy (new_token
.str
, intel_parser
.op_string
, len
);
7560 new_token
.str
[len
] = '\0';
7563 else if (is_identifier_char (*intel_parser
.op_string
))
7565 char *p
= new_token
.str
;
7566 char *q
= intel_parser
.op_string
;
7568 /* A '.' or '$' followed by an identifier char is an identifier.
7569 Otherwise, it's operator '.' followed by an expression. */
7570 if ((*q
== '.' || *q
== '$') && !is_identifier_char (*(q
+ 1)))
7572 new_token
.code
= '.';
7573 new_token
.str
[0] = '.';
7574 new_token
.str
[1] = '\0';
7578 while (is_identifier_char (*q
) || *q
== '@')
7582 if (strcasecmp (new_token
.str
, "NOT") == 0)
7583 new_token
.code
= '~';
7585 else if (strcasecmp (new_token
.str
, "MOD") == 0)
7586 new_token
.code
= '%';
7588 else if (strcasecmp (new_token
.str
, "AND") == 0)
7589 new_token
.code
= '&';
7591 else if (strcasecmp (new_token
.str
, "OR") == 0)
7592 new_token
.code
= '|';
7594 else if (strcasecmp (new_token
.str
, "XOR") == 0)
7595 new_token
.code
= '^';
7597 else if (strcasecmp (new_token
.str
, "SHL") == 0)
7598 new_token
.code
= T_SHL
;
7600 else if (strcasecmp (new_token
.str
, "SHR") == 0)
7601 new_token
.code
= T_SHR
;
7603 else if (strcasecmp (new_token
.str
, "BYTE") == 0)
7604 new_token
.code
= T_BYTE
;
7606 else if (strcasecmp (new_token
.str
, "WORD") == 0)
7607 new_token
.code
= T_WORD
;
7609 else if (strcasecmp (new_token
.str
, "DWORD") == 0)
7610 new_token
.code
= T_DWORD
;
7612 else if (strcasecmp (new_token
.str
, "FWORD") == 0)
7613 new_token
.code
= T_FWORD
;
7615 else if (strcasecmp (new_token
.str
, "QWORD") == 0)
7616 new_token
.code
= T_QWORD
;
7618 else if (strcasecmp (new_token
.str
, "TBYTE") == 0
7619 /* XXX remove (gcc still uses it) */
7620 || strcasecmp (new_token
.str
, "XWORD") == 0)
7621 new_token
.code
= T_TBYTE
;
7623 else if (strcasecmp (new_token
.str
, "XMMWORD") == 0
7624 || strcasecmp (new_token
.str
, "OWORD") == 0)
7625 new_token
.code
= T_XMMWORD
;
7627 else if (strcasecmp (new_token
.str
, "PTR") == 0)
7628 new_token
.code
= T_PTR
;
7630 else if (strcasecmp (new_token
.str
, "SHORT") == 0)
7631 new_token
.code
= T_SHORT
;
7633 else if (strcasecmp (new_token
.str
, "OFFSET") == 0)
7635 new_token
.code
= T_OFFSET
;
7637 /* ??? This is not mentioned in the MASM grammar but gcc
7638 makes use of it with -mintel-syntax. OFFSET may be
7639 followed by FLAT: */
7640 if (strncasecmp (q
, " FLAT:", 6) == 0)
7641 strcat (new_token
.str
, " FLAT:");
7644 /* ??? This is not mentioned in the MASM grammar. */
7645 else if (strcasecmp (new_token
.str
, "FLAT") == 0)
7647 new_token
.code
= T_OFFSET
;
7649 strcat (new_token
.str
, ":");
7651 as_bad (_("`:' expected"));
7655 new_token
.code
= T_ID
;
7659 else if (strchr ("+-/*%|&^:[]()~", *intel_parser
.op_string
))
7661 new_token
.code
= *intel_parser
.op_string
;
7662 new_token
.str
[0] = *intel_parser
.op_string
;
7663 new_token
.str
[1] = '\0';
7666 else if (strchr ("<>", *intel_parser
.op_string
)
7667 && *intel_parser
.op_string
== *(intel_parser
.op_string
+ 1))
7669 new_token
.code
= *intel_parser
.op_string
== '<' ? T_SHL
: T_SHR
;
7670 new_token
.str
[0] = *intel_parser
.op_string
;
7671 new_token
.str
[1] = *intel_parser
.op_string
;
7672 new_token
.str
[2] = '\0';
7676 as_bad (_("Unrecognized token `%s'"), intel_parser
.op_string
);
7678 intel_parser
.op_string
+= strlen (new_token
.str
);
7679 cur_token
= new_token
;
7682 /* Put cur_token back into the token stream and make cur_token point to
7685 intel_putback_token (void)
7687 if (cur_token
.code
!= T_NIL
)
7689 intel_parser
.op_string
-= strlen (cur_token
.str
);
7690 free (cur_token
.str
);
7692 cur_token
= prev_token
;
7694 /* Forget prev_token. */
7695 prev_token
.code
= T_NIL
;
7696 prev_token
.reg
= NULL
;
7697 prev_token
.str
= NULL
;
7701 tc_x86_regname_to_dw2regnum (char *regname
)
7703 unsigned int regnum
;
7704 unsigned int regnames_count
;
7705 static const char *const regnames_32
[] =
7707 "eax", "ecx", "edx", "ebx",
7708 "esp", "ebp", "esi", "edi",
7709 "eip", "eflags", NULL
,
7710 "st0", "st1", "st2", "st3",
7711 "st4", "st5", "st6", "st7",
7713 "xmm0", "xmm1", "xmm2", "xmm3",
7714 "xmm4", "xmm5", "xmm6", "xmm7",
7715 "mm0", "mm1", "mm2", "mm3",
7716 "mm4", "mm5", "mm6", "mm7",
7717 "fcw", "fsw", "mxcsr",
7718 "es", "cs", "ss", "ds", "fs", "gs", NULL
, NULL
,
7721 static const char *const regnames_64
[] =
7723 "rax", "rdx", "rcx", "rbx",
7724 "rsi", "rdi", "rbp", "rsp",
7725 "r8", "r9", "r10", "r11",
7726 "r12", "r13", "r14", "r15",
7728 "xmm0", "xmm1", "xmm2", "xmm3",
7729 "xmm4", "xmm5", "xmm6", "xmm7",
7730 "xmm8", "xmm9", "xmm10", "xmm11",
7731 "xmm12", "xmm13", "xmm14", "xmm15",
7732 "st0", "st1", "st2", "st3",
7733 "st4", "st5", "st6", "st7",
7734 "mm0", "mm1", "mm2", "mm3",
7735 "mm4", "mm5", "mm6", "mm7",
7737 "es", "cs", "ss", "ds", "fs", "gs", NULL
, NULL
,
7738 "fs.base", "gs.base", NULL
, NULL
,
7740 "mxcsr", "fcw", "fsw"
7742 const char *const *regnames
;
7744 if (flag_code
== CODE_64BIT
)
7746 regnames
= regnames_64
;
7747 regnames_count
= ARRAY_SIZE (regnames_64
);
7751 regnames
= regnames_32
;
7752 regnames_count
= ARRAY_SIZE (regnames_32
);
7755 for (regnum
= 0; regnum
< regnames_count
; regnum
++)
7756 if (regnames
[regnum
] != NULL
7757 && strcmp (regname
, regnames
[regnum
]) == 0)
7764 tc_x86_frame_initial_instructions (void)
7766 static unsigned int sp_regno
;
7769 sp_regno
= tc_x86_regname_to_dw2regnum (flag_code
== CODE_64BIT
7772 cfi_add_CFA_def_cfa (sp_regno
, -x86_cie_data_alignment
);
7773 cfi_add_CFA_offset (x86_dwarf2_return_column
, x86_cie_data_alignment
);
7777 i386_elf_section_type (const char *str
, size_t len
)
7779 if (flag_code
== CODE_64BIT
7780 && len
== sizeof ("unwind") - 1
7781 && strncmp (str
, "unwind", 6) == 0)
7782 return SHT_X86_64_UNWIND
;
7789 tc_pe_dwarf2_emit_offset (symbolS
*symbol
, unsigned int size
)
7793 expr
.X_op
= O_secrel
;
7794 expr
.X_add_symbol
= symbol
;
7795 expr
.X_add_number
= 0;
7796 emit_expr (&expr
, size
);
7800 #if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
7801 /* For ELF on x86-64, add support for SHF_X86_64_LARGE. */
7804 x86_64_section_letter (int letter
, char **ptr_msg
)
7806 if (flag_code
== CODE_64BIT
)
7809 return SHF_X86_64_LARGE
;
7811 *ptr_msg
= _("Bad .section directive: want a,l,w,x,M,S,G,T in string");
7814 *ptr_msg
= _("Bad .section directive: want a,w,x,M,S,G,T in string");
7819 x86_64_section_word (char *str
, size_t len
)
7821 if (len
== 5 && flag_code
== CODE_64BIT
&& CONST_STRNEQ (str
, "large"))
7822 return SHF_X86_64_LARGE
;
7828 handle_large_common (int small ATTRIBUTE_UNUSED
)
7830 if (flag_code
!= CODE_64BIT
)
7832 s_comm_internal (0, elf_common_parse
);
7833 as_warn (_(".largecomm supported only in 64bit mode, producing .comm"));
7837 static segT lbss_section
;
7838 asection
*saved_com_section_ptr
= elf_com_section_ptr
;
7839 asection
*saved_bss_section
= bss_section
;
7841 if (lbss_section
== NULL
)
7843 flagword applicable
;
7845 subsegT subseg
= now_subseg
;
7847 /* The .lbss section is for local .largecomm symbols. */
7848 lbss_section
= subseg_new (".lbss", 0);
7849 applicable
= bfd_applicable_section_flags (stdoutput
);
7850 bfd_set_section_flags (stdoutput
, lbss_section
,
7851 applicable
& SEC_ALLOC
);
7852 seg_info (lbss_section
)->bss
= 1;
7854 subseg_set (seg
, subseg
);
7857 elf_com_section_ptr
= &_bfd_elf_large_com_section
;
7858 bss_section
= lbss_section
;
7860 s_comm_internal (0, elf_common_parse
);
7862 elf_com_section_ptr
= saved_com_section_ptr
;
7863 bss_section
= saved_bss_section
;
7866 #endif /* OBJ_ELF || OBJ_MAYBE_ELF */