* config/tc-tic80.c (md_begin): Declare external variable

[deliverable/binutils-gdb.git] / gas / config / tc-tic80.c

/* tc-tic80.c -- Assemble for the TI TMS320C80 (MV)
   Copyright (C) 1996, 1997 Free Software Foundation, Inc.

   This file is part of GAS, the GNU Assembler.

   GAS is free software; you can redistribute it and/or modify
   it under the terms of the GNU General Public License as published by
   the Free Software Foundation; either version 2, or (at your option)
   any later version.

   GAS is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   GNU General Public License for more details.

   You should have received a copy of the GNU General Public License
   along with GAS; see the file COPYING.  If not, write to the Free
   Software Foundation, 59 Temple Place - Suite 330, Boston, MA
   02111-1307, USA.  */

#include "as.h"
#include "opcode/tic80.h"

#define internal_error(what) \
  as_fatal("internal error:%s:%d: %s\n",__FILE__,__LINE__,what)
#define internal_error_a(what,arg) \
  as_fatal("internal error:%s:%d: %s %d\n",__FILE__,__LINE__,what,arg)

\f
/* Generic assembler global variables which must be defined by all targets. */

/* Characters which always start a comment. */
const char comment_chars[] = ";";

/* Characters which start a comment at the beginning of a line.  */
const char line_comment_chars[] = ";*";

/* Characters which may be used to separate multiple commands on a single
   line. The semicolon is such a character by default and should not be
   explicitly listed. */
const char line_separator_chars[] = "";

/* Characters which are used to indicate an exponent in a floating 
   point number.  */
const char EXP_CHARS[] = "eE";

/* Characters which mean that a number is a floating point constant, 
   as in 0f1.0.  */
const char FLT_CHARS[] = "fF";

/* This table describes all the machine specific pseudo-ops the assembler
   has to support.  The fields are:

   pseudo-op name without dot
   function to call to execute this pseudo-op
   integer arg to pass to the function */

const pseudo_typeS md_pseudo_table[] =
{
  { "align",    s_align_bytes,  4 },    /* Do byte alignment, default is a 4 byte boundary */
  { "word",     cons,           4 },    /* FIXME: Should this be machine independent? */
  { "bss",      s_lcomm,        1 },
  { NULL,       NULL,           0 }
};

/* Opcode hash table.  */
static struct hash_control *tic80_hash;

static struct tic80_opcode * find_opcode PARAMS ((struct tic80_opcode *, expressionS []));
static void build_insn PARAMS ((struct tic80_opcode *, expressionS *));
static int get_operands PARAMS ((expressionS exp[]));
static int const_overflow PARAMS ((unsigned long num, int bits, int flags));

\f
int
md_estimate_size_before_relax (fragP, segment_type)
     fragS *fragP;
     segT segment_type;
{
  internal_error ("Relaxation is a luxury we can't afford");
  return (-1);
}

/* We have no need to default values of symbols.  */

/* ARGSUSED */
symbolS *
md_undefined_symbol (name)
     char *name;
{
  return 0;
}

/* Turn a string in input_line_pointer into a floating point constant of type
   type, and store the appropriate bytes in *litP.  The number of LITTLENUMS
   emitted is stored in *sizeP .  An error message is returned, or NULL on OK.
 */

#define MAX_LITTLENUMS 4

char *
md_atof (type, litP, sizeP)
     int type;
     char *litP;
     int *sizeP;
{
  int prec;
  LITTLENUM_TYPE words[MAX_LITTLENUMS];
  LITTLENUM_TYPE *wordP;
  char *t;
  char *atof_ieee ();
  
  switch (type)
    {
    case 'f':
    case 'F':
    case 's':
    case 'S':
      prec = 2;
      break;

    case 'd':
    case 'D':
    case 'r':
    case 'R':
      prec = 4;
      break;

    default:
      *sizeP = 0;
      return "bad call to md_atof ()";
    }

  t = atof_ieee (input_line_pointer, type, words);
  if (t)
    {
      input_line_pointer = t;
    }
  
  *sizeP = prec * sizeof (LITTLENUM_TYPE);
  
  for (wordP = words; prec--;)
    {
      md_number_to_chars (litP, (valueT) (*wordP++), sizeof (LITTLENUM_TYPE));
      litP += sizeof (LITTLENUM_TYPE);
    }
  return (NULL);
}

/* Check to see if the constant value in NUM will fit in a field of
   width BITS if it has flags FLAGS. */

static int
const_overflow (num, bits, flags)
     unsigned long num;
     int bits;
     int flags;
{
  long min, max;
  int retval = 0;

  /* Only need to check fields less than 32 bits wide */
  if (bits < 32)
    if (flags & TIC80_OPERAND_SIGNED)
      {
        max = (1 << (bits - 1)) - 1; 
        min = - (1 << (bits - 1));  
        retval = ((long) num > max) || ((long) num < min);
      }
    else
      {
        max = (1 << bits) - 1;
        min = 0;
        retval = (num > max) || (num < min);
      }
  return (retval);
}

/* get_operands() parses a string of operands and fills in a passed array of
   expressions in EXP.

   Note that we use O_absent expressions to record additional information
   about the previous non-O_absent expression, such as ":m" or ":s"
   modifiers or register numbers enclosed in parens like "(r10)".

   Returns the number of expressions that were placed in EXP.

   */

static int
get_operands (exp) 
     expressionS exp[];
{
  char *p = input_line_pointer;
  int numexp = 0;
  int mflag = 0;
  int sflag = 0;
  int parens = 0;

  while (*p)  
    {
      /* Skip leading whitespace */
      while (*p == ' ' || *p == '\t' || *p == ',') 
        {
          p++;
        }

      /* Check to see if we have any operands left to parse */
      if (*p == 0 || *p == '\n' || *p == '\r') 
        {
          break;
        }
      
      /* Notice scaling or direct memory operand modifiers and save them in
         an O_absent expression after the expression that they modify. */

      if (*p == ':') 
        {
          p++;
          exp[numexp].X_op = O_absent;
          if (*p == 'm') 
            {
              p++;
              /* This is a ":m" modifier */
              exp[numexp].X_add_number = TIC80_OPERAND_M_SI | TIC80_OPERAND_M_LI;
            }
          else if (*p == 's')
            {
              p++;
              /* This is a ":s" modifier */
              exp[numexp].X_add_number = TIC80_OPERAND_SCALED;
            }
          else
            {
              as_bad ("':' not followed by 'm' or 's'");
            }
          numexp++;
          continue;
        }

      /* Handle leading '(' on operands that use them, by recording that we
         have entered a paren nesting level and then continuing.  We complain
         about multiple nesting. */

      if (*p == '(')
        {
          if (++parens != 1)
            {
              as_bad ("paren nesting");
            }
          p++;
          continue;
        }

      /* Handle trailing ')' on operands that use them, by reducing the
         nesting level and then continuing.  We complain if there were too
         many closures. */

      if (*p == ')') 
        {
          /* Record that we have left a paren group and continue */
          if (--parens < 0)
            {
              as_bad ("mismatched parenthesis");
            }
          p++;
          continue;
        }

      /* Begin operand parsing at the current scan point. */

      input_line_pointer = p;
      expression (&exp[numexp]);

      if (exp[numexp].X_op == O_illegal)
        {
          as_bad ("illegal operand");
        }
      else if (exp[numexp].X_op == O_absent)
        {
          as_bad ("missing operand");
        }

      numexp++;
      p = input_line_pointer;
    }

  if (parens)
    {
      exp[numexp].X_op = O_absent;
      exp[numexp++].X_add_number = TIC80_OPERAND_PARENS;
    }

  /* Mark the end of the valid operands with an illegal expression. */
  exp[numexp].X_op = O_illegal;

  return (numexp);
}

/* find_opcode() gets a pointer to the entry in the opcode table that
   matches the instruction being assembled, or returns NULL if no such match
   is found.

   First it parses all the operands and save them as expressions.  Note that
   we use O_absent expressions to record additional information about the
   previous non-O_absent expression, such as ":m" or ":s" modifiers or
   register numbers enclosed in parens like "(r10)".

   It then looks at all opcodes with the same name and uses the operands to
   choose the correct opcode.  */

static struct tic80_opcode *
find_opcode (opcode, myops)
     struct tic80_opcode *opcode;
     expressionS myops[];
{
  int numexp;                           /* Number of expressions from parsing operands */
  int expi;                             /* Index of current expression to match */
  int opi;                              /* Index of current operand to match */
  int match = 0;                        /* Set to 1 when an operand match is found */
  struct tic80_opcode *opc = opcode;    /* Pointer to current opcode table entry */
  const struct tic80_opcode *end;       /* Pointer to end of opcode table */

  /* First parse all the operands so we only have to do it once.  There may
     be more expressions generated than there are operands. */

  numexp = get_operands (myops);

  /* For each opcode with the same name, try to match it against the parsed
     operands. */

  end = tic80_opcodes + tic80_num_opcodes;
  while (!match && (opc < end) && (strcmp (opc -> name, opcode -> name) == 0))
    {
      /* Start off assuming a match.  If we find a mismatch, then this is
         reset and the operand/expr matching loop terminates with match
         equal to zero, which allows us to try the next opcode. */

      match = 1;

      /* For each expression, try to match it against the current operand
         for the current opcode.  Upon any mismatch, we abandon further
         matching for the current opcode table entry.  */

      for (expi = 0, opi = -1; (expi < numexp) && match; expi++)
        {
          int bits, flags, X_op, num;

          X_op = myops[expi].X_op;
          num = myops[expi].X_add_number;

          /* The O_absent expressions apply to the same operand as the most
             recent non O_absent expression.  So only increment the operand
             index when the current expression is not one of these special
             expressions. */

          if (X_op != O_absent)
            {
              opi++;
            }

          flags = tic80_operands[opc -> operands[opi]].flags;
          bits = tic80_operands[opc -> operands[opi]].bits;

          switch (X_op)
            {
            case O_register:
              /* Also check that registers that are supposed to be even actually
                 are even. */
              if (((flags & TIC80_OPERAND_GPR) != (num & TIC80_OPERAND_GPR)) ||
                  ((flags & TIC80_OPERAND_FPA) != (num & TIC80_OPERAND_FPA)) ||
                  ((flags & TIC80_OPERAND_CR) != (num & TIC80_OPERAND_CR)) ||
                  ((flags & TIC80_OPERAND_EVEN) && (num & 1)) ||
                  const_overflow (num & ~TIC80_OPERAND_MASK, bits, flags))
                {
                  match = 0;
                }
              break;
            case O_constant:
              if ((flags & TIC80_OPERAND_ENDMASK) && (num == 32))
                {
                  /* Endmask values of 0 and 32 give identical results */
                  num = 0;
                }
              if ((flags & (TIC80_OPERAND_FPA | TIC80_OPERAND_GPR)) ||
                  const_overflow (num, bits, flags))
                {
                  match = 0;
                }
              break;
            case O_symbol:
              if ((bits < 32) && (flags & TIC80_OPERAND_PCREL))
                {
                  /* For now we only allow PC relative relocations in the
                     short immediate fields, like the TI assembler.
                     FIXME: Should be able to choose "best-fit". */
                }
              else if ((bits == 32) /* && (flags & TIC80_OPERAND_BASEREL) */)
                {
                  /* For now we only allow base relative relocations in
                     the long immediate fields, like the TI assembler.
                     FIXME: Should be able to choose "best-fit". */
                }
              else
                {
                  /* Symbols that don't match one of the above cases are
                     rejected as an operand. */
                  match = 0;
                }
              break;
            case O_absent:
              /* If this is an O_absent expression, then it may be an expression that
                 supplies additional information about the operand, such as ":m" or
                 ":s" modifiers. Check to see that the operand matches this requirement. */
              if (!((num & TIC80_OPERAND_M_SI) && (flags & TIC80_OPERAND_M_SI) ||
                    (num & TIC80_OPERAND_M_LI) && (flags & TIC80_OPERAND_M_LI) ||
                    (num & TIC80_OPERAND_SCALED) && (flags & TIC80_OPERAND_SCALED)))
                {
                  match = 0;
                }
              break;
            case O_big:
              if ((num > 0) || !(flags & TIC80_OPERAND_FLOAT))
                {
                  match = 0;
                }
              break;
            case O_illegal:
            case O_symbol_rva:
            case O_uminus:
            case O_bit_not:
            case O_logical_not:
            case O_multiply:
            case O_divide:
            case O_modulus:
            case O_left_shift:
            case O_right_shift:
            case O_bit_inclusive_or:
            case O_bit_or_not:
            case O_bit_exclusive_or:
            case O_bit_and:
            case O_add:
            case O_subtract:
            case O_eq:
            case O_ne:
            case O_lt:
            case O_le:
            case O_ge:
            case O_gt:
            case O_logical_and:
            case O_logical_or:
            case O_max:
            default:
              internal_error_a ("unhandled expression type", X_op);
            }
        }
      if (!match)
        {
          opc++;
        }
    }  

  return (match ? opc : NULL);

#if 0

  /* Now search the opcode table table for one with operands that
     matches what we've got. */

  while (!match)
    {
      match = 1;
      for (i = 0; opcode -> operands[i]; i++) 
        {
          int flags = tic80_operands[opcode->operands[i]].flags;
          int X_op = myops[i].X_op;
          int num = myops[i].X_add_number;

          if (X_op == 0) 
            {
              match = 0;
              break;
            }
              
          if (flags & (TIC80_OPERAND_GPR | TIC80_OPERAND_FPA | TIC80_OPERAND_CR)) 
            {
              if ((X_op != O_register) ||
                  ((flags & TIC80_OPERAND_GPR) != (num & TIC80_OPERAND_GPR)) ||
                  ((flags & TIC80_OPERAND_FPA) != (num & TIC80_OPERAND_FPA)) ||
                  ((flags & TIC80_OPERAND_CR) != (num & TIC80_OPERAND_CR)))
                {
                  match=0;
                  break;
                }         
            }
              
          if (((flags & TIC80_OPERAND_MINUS) && ((X_op != O_absent) || (num != TIC80_OPERAND_MINUS))) ||
              ((flags & TIC80_OPERAND_PLUS) && ((X_op != O_absent) || (num != TIC80_OPERAND_PLUS))) ||
              ((flags & TIC80_OPERAND_ATMINUS) && ((X_op != O_absent) || (num != TIC80_OPERAND_ATMINUS))) ||
              ((flags & TIC80_OPERAND_ATPAR) && ((X_op != O_absent) || (num != TIC80_OPERAND_ATPAR))) ||
              ((flags & TIC80_OPERAND_ATSIGN) && ((X_op != O_absent) || (num != TIC80_OPERAND_ATSIGN)))) 
            {
              match=0;
              break;
            }         
        }
      /* we're only done if the operands matched so far AND there
         are no more to check */
      if (match && myops[i].X_op==0) 
        break;
      else
        match = 0;

      next_opcode = opcode+1;
      if (next_opcode->opcode == 0) 
        break;
      if (strcmp(next_opcode->name, opcode->name))
        break;
      opcode = next_opcode;
    }

  if (!match)  
    {
      as_bad ("bad opcode or operands");
      return (0);
    }

  /* Check that all registers that are required to be even are. */
  /* Also, if any operands were marked as registers, but were really symbols */
  /* fix that here. */
  for (i=0; opcode->operands[i]; i++) 
    {
      if ((tic80_operands[opcode->operands[i]].flags & TIC80_OPERAND_EVEN) &&
          (myops[i].X_add_number & 1)) 
        as_fatal ("Register number must be EVEN");
      if (myops[i].X_op == O_register)
        {
          if (!(tic80_operands[opcode->operands[i]].flags & TIC80_OPERAND_REG)) 
            {
              myops[i].X_op = O_symbol;
              myops[i].X_add_symbol = symbol_find_or_make ((char *)myops[i].X_op_symbol);
              myops[i].X_add_number = 0;
              myops[i].X_op_symbol = NULL;
            }
        }
    }

#endif
}

/* build_insn takes a pointer to the opcode entry in the opcode table
   and the array of operand expressions and writes out the instruction. */

static void
build_insn (opcode, opers) 
     struct tic80_opcode *opcode;
     expressionS *opers;
{
  int expi;                             /* Index of current expression to match */
  int opi;                              /* Index of current operand to match */
  unsigned long insn[2];                /* Instruction and long immediate (if any) */
  int extended = 0;                     /* Nonzero if instruction is 8 bytes */
  char *f;                              /* Temporary pointer to output location */

  /* Start with the raw opcode bits from the opcode table. */
  insn[0] = opcode -> opcode;

  /* We are going to insert at least one 32 bit opcode so get the
     frag now. */

  f = frag_more (4);

  /* For each operand expression, insert the appropriate bits into the
     instruction . */
  for (expi = 0, opi = -1; opers[expi].X_op != O_illegal; expi++)
    {
      int bits, shift, flags, X_op, num;

      X_op = opers[expi].X_op;
      num = opers[expi].X_add_number;

      /* The O_absent expressions apply to the same operand as the most
         recent non O_absent expression.  So only increment the operand
         index when the current expression is not one of these special
         expressions. */

      if (X_op != O_absent)
        {
          opi++;
        }

      flags = tic80_operands[opcode -> operands[opi]].flags;
      bits = tic80_operands[opcode -> operands[opi]].bits;
      shift = tic80_operands[opcode -> operands[opi]].shift;

      switch (X_op)
        {
        case O_register:
          num &= ~TIC80_OPERAND_MASK;
          insn[0] = insn[0] | (num << shift);
          break;
        case O_constant:
          if ((flags & TIC80_OPERAND_ENDMASK) && (num == 32))
            {
              /* Endmask values of 0 and 32 give identical results */
              num = 0;
            }
          else if ((flags & TIC80_OPERAND_BITNUM))
            {
              /* BITNUM values are stored in one's complement form */
              num = (~num & 0x1F);
            }
          /* Mask off upper bits, just it case it is signed and is negative */
          if (bits < 32)
            {
              num &= (1 << bits) - 1;
              insn[0] = insn[0] | (num << shift);
            }
          else
            {
              extended++;
              insn[1] = num;
            }
          break;
        case O_symbol:
          if (flags & TIC80_OPERAND_PCREL)
            {
              fix_new_exp (frag_now,
                           f - (frag_now -> fr_literal),
                           4,                   /* FIXME! how is this used? */
                           &opers[expi],
                           1,
                           R_MPPCR);
            }
          else if (bits == 32)  /* was (flags & TIC80_OPERAND_BASEREL) */
            {
              extended++;
              fix_new_exp (frag_now,
                           (f + 4) - (frag_now -> fr_literal),
                           4,
                           &opers[expi], 
                           0,
                           R_RELLONGX);
            }
          else
            {
              internal_error ("symbol reloc that is not PC relative or 32 bits");
            }
          break;
        case O_absent:
          /* Each O_absent expression can indicate exactly one possible modifier. */
          if ((num & TIC80_OPERAND_M_SI) && (flags & TIC80_OPERAND_M_SI))
            {
              insn[0] = insn[0] | (1 << 17);
            }
          else if ((num & TIC80_OPERAND_M_LI) && (flags & TIC80_OPERAND_M_LI))
            {
              insn[0] = insn[0] | (1 << 15);
            }
          else if ((num & TIC80_OPERAND_SCALED) && (flags & TIC80_OPERAND_SCALED))
            {
              insn[0] = insn[0] | (1 << 11);
            }
          else if ((num & TIC80_OPERAND_PARENS) && (flags & TIC80_OPERAND_PARENS))
            {
              /* No code to generate, just accept and discard this expression */
            }
          else
            {
              internal_error_a ("unhandled operand modifier", opers[expi].X_add_number);
            }
          break;
        case O_big:
          extended++;
          {
            union {
              unsigned long l;
              LITTLENUM_TYPE words[10];
            } u;
            gen_to_words (u.words, 2, 8L);      /* FIXME: magic numbers */
            /* FIXME: More magic, swap the littlenums */
            u.words[2] = u.words[0];
            u.words[0] = u.words [1];
            u.words[1] = u.words [2];
            insn[1] = u.l;
          }
          break;
        case O_illegal:
        case O_symbol_rva:
        case O_uminus:
        case O_bit_not:
        case O_logical_not:
        case O_multiply:
        case O_divide:
        case O_modulus:
        case O_left_shift:
        case O_right_shift:
        case O_bit_inclusive_or:
        case O_bit_or_not:
        case O_bit_exclusive_or:
        case O_bit_and:
        case O_add:
        case O_subtract:
        case O_eq:
        case O_ne:
        case O_lt:
        case O_le:
        case O_ge:
        case O_gt:
        case O_logical_and:
        case O_logical_or:
        case O_max:
        default:
          internal_error_a ("unhandled expression", X_op);
          break;
        }
    }

  /* Write out the instruction, either 4 or 8 bytes.  */

  md_number_to_chars (f, insn[0], 4);
  if (extended)
    {
      f = frag_more (4);
      md_number_to_chars (f, insn[1], 4);
    }
}

/* This is the main entry point for the machine-dependent assembler.  Gas
   calls this function for each input line which does not contain a
   pseudoop.

  STR points to a NULL terminated machine dependent instruction.  This
  function is supposed to emit the frags/bytes it assembles to.  */

void
md_assemble (str)
     char *str;
{
  char *scan;
  unsigned char *input_line_save;
  struct tic80_opcode *opcode;
  expressionS myops[16];
  unsigned long insn;

  /* Ensure there is something there to assemble. */
  assert (str);

  /* Drop any leading whitespace. */
  while (isspace (*str))
    {
      str++;
    }

  /* Isolate the mnemonic from the rest of the string by finding the first
     whitespace character and zapping it to a null byte. */
  for (scan = str; *scan != '\000' && !isspace (*scan); scan++) {;}
  if (*scan != '\000')
    {
      *scan++ = '\000';
    }

  /* Try to find this mnemonic in the hash table */
  if ((opcode = (struct tic80_opcode *) hash_find (tic80_hash, str)) == NULL)
    {
      as_bad ("Invalid mnemonic: '%s'", str);
      return;
    }

  str = scan;
  while (isspace (*scan))
    {
      scan++;
    }

  input_line_save = input_line_pointer;
  input_line_pointer = str;

  opcode = find_opcode (opcode, myops);
  if (opcode == NULL)
    {
      as_bad ("Invalid operands: '%s'", input_line_save);
    }

  input_line_pointer = input_line_save;
  build_insn (opcode, myops);
}

/* This function is called once at the start of assembly, after the command
   line arguments have been parsed and all the machine independent
   initializations have been completed.

   It should set up all the tables, etc., that the machine dependent part of
   the assembler will need.  */

void
md_begin ()
{
  char *prev_name = "";
  register const struct tic80_opcode *op;
  register const struct tic80_opcode *op_end;
  const struct predefined_symbol *pdsp;
  extern int coff_flags;                        /* Defined in obj-coff.c */

  /* Set F_AR32WR in coff_flags, which will end up in the file header
     f_flags field. */

  coff_flags |= F_AR32WR;       /* TIc80 is 32 bit little endian */

  /* Insert unique names into hash table.  The TIc80 instruction set
     has many identical opcode names that have different opcodes based
     on the operands.  This hash table then provides a quick index to
     the first opcode with a particular name in the opcode table.  */

  tic80_hash = hash_new ();
  op_end = tic80_opcodes + tic80_num_opcodes;
  for (op = tic80_opcodes; op < op_end; op++)
    {
      if (strcmp (prev_name, op -> name) != 0) 
        {
          prev_name = (char *) op -> name;
          hash_insert (tic80_hash, op -> name, (char *) op);
        }
    }

  /* Insert the predefined symbols into the symbol table.  We use symbol_create
     rather than symbol_new so that these symbols don't end up in the object
     files' symbol table.  Note that the values of the predefined symbols include
     some upper bits that distinguish the type of the symbol (register, bitnum,
     condition code, etc) and these bits must be masked away before actually
     inserting the values into the instruction stream.  For registers we put
     these bits in the symbol table since we use them later and there is no
     question that they aren't part of the register number.  For constants we
     can't do that since the constant can be any value, so they are masked off
     before putting them into the symbol table. */

  pdsp = NULL;
  while ((pdsp = tic80_next_predefined_symbol (pdsp)) != NULL)
    {
      segT segment;
      valueT valu;
      int symtype;

      symtype = PDS_VALUE (pdsp) & TIC80_OPERAND_MASK;
      switch (symtype)
        {
        case TIC80_OPERAND_GPR:
        case TIC80_OPERAND_FPA:
        case TIC80_OPERAND_CR:
          segment = reg_section;
          valu = PDS_VALUE (pdsp);
          break;
        case TIC80_OPERAND_CC:
        case TIC80_OPERAND_BITNUM:
          segment = absolute_section;
          valu = PDS_VALUE (pdsp) & ~TIC80_OPERAND_MASK;
          break;
        default:
          internal_error_a ("unhandled predefined symbol bits", symtype);
          break;
        }
      symbol_table_insert (symbol_create (PDS_NAME (pdsp), segment, valu,
                                          &zero_address_frag));
    }
}

\f

/* The assembler adds md_shortopts to the string passed to getopt. */

CONST char *md_shortopts = "";

/* The assembler adds md_longopts to the machine independent long options
   that are passed to getopt. */

struct option md_longopts[] = {
  {NULL, no_argument, NULL, 0}
};

size_t md_longopts_size = sizeof(md_longopts);

/* The md_parse_option function will be called whenever getopt returns an
   unrecognized code, presumably indicating a special code value which
   appears in md_longopts for machine specific command line options. */

int
md_parse_option (c, arg)
     int c;
     char *arg;
{
  return (0);
}

/* The md_show_usage function will be called whenever a usage message is
   printed.  It should print a description of the machine specific options
   found in md_longopts. */

void
md_show_usage (stream)
     FILE *stream;
{
}

\f
/* Attempt to simplify or even eliminate a fixup.  The return value is
   ignored; perhaps it was once meaningful, but now it is historical.
   To indicate that a fixup has been eliminated, set fixP->fx_done.
   */

void
md_apply_fix (fixP, val)
     fixS *fixP;
     long val;
{
  char *dest =  fixP -> fx_frag -> fr_literal + fixP -> fx_where;

  switch (fixP -> fx_r_type)
    {
    case R_RELLONGX:
      md_number_to_chars (dest, (valueT) val, 4);
      break;
    case R_MPPCR:
      /* FIXME! - should check for overflow of the 15 bit field */
      *dest++ = val >> 2;
      *dest = (*dest & 0x80) | val >> 10;
      break;
    case R_ABS:
      md_number_to_chars (dest, (valueT) val, fixP -> fx_size);
      break;
    default:
      internal_error_a ("unhandled relocation type in fixup", fixP -> fx_r_type);
      break;
    }
}

\f
/* Functions concerning relocs.  */

/* The location from which a PC relative jump should be calculated,
   given a PC relative reloc.

   For the TIc80, this is the address of the 32 bit opcode containing
   the PC relative field. */

long
md_pcrel_from (fixP)
     fixS *fixP;
{
  return (fixP -> fx_frag -> fr_address + fixP -> fx_where) ;
}

/*
 * Called after relax() is finished.
 * In:  Address of frag.
 *      fr_type == rs_machine_dependent.
 *      fr_subtype is what the address relaxed to.
 *
 * Out: Any fixSs and constants are set up.
 *      Caller will turn frag into a ".space 0".
 */

void
md_convert_frag (headers, seg, fragP)
     object_headers *headers;
     segT seg;
     fragS *fragP;
{
  internal_error ("md_convert_frag() not implemented yet");
  abort ();
}

\f
/*ARGSUSED*/
void
tc_coff_symbol_emit_hook (ignore)
     symbolS *ignore;
{
}

#if defined OBJ_COFF

short
tc_coff_fix2rtype (fixP)
     fixS *fixP;
{
  return (fixP -> fx_r_type);
}

#endif  /* OBJ_COFF */

/* end of tc-tic80.c */