3 # Guess values for system-dependent variables and create Makefiles.
4 # Generated automatically using autoconf version 2.12
5 # Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
7 # This configure script is free software; the Free Software Foundation
8 # gives unlimited permission to copy, distribute and modify it.
12 ac_default_prefix
=/usr
/local
13 # Any additions from configure.in:
15 --enable-bfd-assembler use BFD back end for writing object files"
17 targets alternative target configurations besides the primary"
19 --enable-shared build shared BFD library"
21 --enable-commonbfdlib build shared BFD/opcodes/libiberty library"
23 # Initialize some variables set by options.
24 # The variables have the same names as the options, with
25 # dashes changed to underlines.
27 cache_file
=.
/config.cache
36 program_transform_name
=s
,x
,x
,
44 bindir
='${exec_prefix}/bin'
45 sbindir
='${exec_prefix}/sbin'
46 libexecdir
='${exec_prefix}/libexec'
47 datadir
='${prefix}/share'
48 sysconfdir
='${prefix}/etc'
49 sharedstatedir
='${prefix}/com'
50 localstatedir
='${prefix}/var'
51 libdir
='${exec_prefix}/lib'
52 includedir
='${prefix}/include'
53 oldincludedir
='/usr/include'
54 infodir
='${prefix}/info'
55 mandir
='${prefix}/man'
57 # Initialize some other variables.
60 # Maximum number of lines to put in a shell here document.
67 # If the previous option needs an argument, assign it.
68 if test -n "$ac_prev"; then
69 eval "$ac_prev=\$ac_option"
75 -*=*) ac_optarg
=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
79 # Accept the important Cygnus configure options, so we can diagnose typos.
83 -bindir |
--bindir |
--bindi |
--bind |
--bin |
--bi)
85 -bindir=* |
--bindir=* |
--bindi=* |
--bind=* |
--bin=* |
--bi=*)
86 bindir
="$ac_optarg" ;;
88 -build |
--build |
--buil |
--bui |
--bu)
90 -build=* |
--build=* |
--buil=* |
--bui=* |
--bu=*)
93 -cache-file |
--cache-file |
--cache-fil |
--cache-fi \
94 |
--cache-f |
--cache- |
--cache |
--cach |
--cac |
--ca |
--c)
96 -cache-file=* |
--cache-file=* |
--cache-fil=* |
--cache-fi=* \
97 |
--cache-f=* |
--cache-=* |
--cache=* |
--cach=* |
--cac=* |
--ca=* |
--c=*)
98 cache_file
="$ac_optarg" ;;
100 -datadir |
--datadir |
--datadi |
--datad |
--data |
--dat |
--da)
102 -datadir=* |
--datadir=* |
--datadi=* |
--datad=* |
--data=* |
--dat=* \
104 datadir
="$ac_optarg" ;;
106 -disable-* |
--disable-*)
107 ac_feature
=`echo $ac_option|sed -e 's/-*disable-//'`
108 # Reject names that are not valid shell variable names.
109 if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
110 { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
112 ac_feature
=`echo $ac_feature| sed 's/-/_/g'`
113 eval "enable_${ac_feature}=no" ;;
115 -enable-* |
--enable-*)
116 ac_feature
=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
117 # Reject names that are not valid shell variable names.
118 if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
119 { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
121 ac_feature
=`echo $ac_feature| sed 's/-/_/g'`
126 eval "enable_${ac_feature}='$ac_optarg'" ;;
128 -exec-prefix |
--exec_prefix |
--exec-prefix |
--exec-prefi \
129 |
--exec-pref |
--exec-pre |
--exec-pr |
--exec-p |
--exec- \
130 |
--exec |
--exe |
--ex)
131 ac_prev
=exec_prefix
;;
132 -exec-prefix=* |
--exec_prefix=* |
--exec-prefix=* |
--exec-prefi=* \
133 |
--exec-pref=* |
--exec-pre=* |
--exec-pr=* |
--exec-p=* |
--exec-=* \
134 |
--exec=* |
--exe=* |
--ex=*)
135 exec_prefix
="$ac_optarg" ;;
137 -gas |
--gas |
--ga |
--g)
138 # Obsolete; use --with-gas.
141 -help |
--help |
--hel |
--he)
142 # Omit some internal or obsolete options to make the list less imposing.
143 # This message is too long to be a string in the A/UX 3.1 sh.
145 Usage: configure [options] [host]
146 Options: [defaults in brackets after descriptions]
148 --cache-file=FILE cache test results in FILE
149 --help print this message
150 --no-create do not create output files
151 --quiet, --silent do not print \`checking...' messages
152 --version print the version of autoconf that created configure
153 Directory and file names:
154 --prefix=PREFIX install architecture-independent files in PREFIX
156 --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
158 --bindir=DIR user executables in DIR [EPREFIX/bin]
159 --sbindir=DIR system admin executables in DIR [EPREFIX/sbin]
160 --libexecdir=DIR program executables in DIR [EPREFIX/libexec]
161 --datadir=DIR read-only architecture-independent data in DIR
163 --sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc]
164 --sharedstatedir=DIR modifiable architecture-independent data in DIR
166 --localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var]
167 --libdir=DIR object code libraries in DIR [EPREFIX/lib]
168 --includedir=DIR C header files in DIR [PREFIX/include]
169 --oldincludedir=DIR C header files for non-gcc in DIR [/usr/include]
170 --infodir=DIR info documentation in DIR [PREFIX/info]
171 --mandir=DIR man documentation in DIR [PREFIX/man]
172 --srcdir=DIR find the sources in DIR [configure dir or ..]
173 --program-prefix=PREFIX prepend PREFIX to installed program names
174 --program-suffix=SUFFIX append SUFFIX to installed program names
175 --program-transform-name=PROGRAM
176 run sed PROGRAM on installed program names
180 --build=BUILD configure for building on BUILD [BUILD=HOST]
181 --host=HOST configure for HOST [guessed]
182 --target=TARGET configure for TARGET [TARGET=HOST]
183 Features and packages:
184 --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
185 --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
186 --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
187 --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
188 --x-includes=DIR X include files are in DIR
189 --x-libraries=DIR X library files are in DIR
191 if test -n "$ac_help"; then
192 echo "--enable and --with options recognized:$ac_help"
196 -host |
--host |
--hos |
--ho)
198 -host=* |
--host=* |
--hos=* |
--ho=*)
201 -includedir |
--includedir |
--includedi |
--included |
--include \
202 |
--includ |
--inclu |
--incl |
--inc)
203 ac_prev
=includedir
;;
204 -includedir=* |
--includedir=* |
--includedi=* |
--included=* |
--include=* \
205 |
--includ=* |
--inclu=* |
--incl=* |
--inc=*)
206 includedir
="$ac_optarg" ;;
208 -infodir |
--infodir |
--infodi |
--infod |
--info |
--inf)
210 -infodir=* |
--infodir=* |
--infodi=* |
--infod=* |
--info=* |
--inf=*)
211 infodir
="$ac_optarg" ;;
213 -libdir |
--libdir |
--libdi |
--libd)
215 -libdir=* |
--libdir=* |
--libdi=* |
--libd=*)
216 libdir
="$ac_optarg" ;;
218 -libexecdir |
--libexecdir |
--libexecdi |
--libexecd |
--libexec \
219 |
--libexe |
--libex |
--libe)
220 ac_prev
=libexecdir
;;
221 -libexecdir=* |
--libexecdir=* |
--libexecdi=* |
--libexecd=* |
--libexec=* \
222 |
--libexe=* |
--libex=* |
--libe=*)
223 libexecdir
="$ac_optarg" ;;
225 -localstatedir |
--localstatedir |
--localstatedi |
--localstated \
226 |
--localstate |
--localstat |
--localsta |
--localst \
227 |
--locals |
--local |
--loca |
--loc |
--lo)
228 ac_prev
=localstatedir
;;
229 -localstatedir=* |
--localstatedir=* |
--localstatedi=* |
--localstated=* \
230 |
--localstate=* |
--localstat=* |
--localsta=* |
--localst=* \
231 |
--locals=* |
--local=* |
--loca=* |
--loc=* |
--lo=*)
232 localstatedir
="$ac_optarg" ;;
234 -mandir |
--mandir |
--mandi |
--mand |
--man |
--ma |
--m)
236 -mandir=* |
--mandir=* |
--mandi=* |
--mand=* |
--man=* |
--ma=* |
--m=*)
237 mandir
="$ac_optarg" ;;
240 # Obsolete; use --without-fp.
243 -no-create |
--no-create |
--no-creat |
--no-crea |
--no-cre \
247 -no-recursion |
--no-recursion |
--no-recursio |
--no-recursi \
248 |
--no-recurs |
--no-recur |
--no-recu |
--no-rec |
--no-re |
--no-r)
251 -oldincludedir |
--oldincludedir |
--oldincludedi |
--oldincluded \
252 |
--oldinclude |
--oldinclud |
--oldinclu |
--oldincl |
--oldinc \
253 |
--oldin |
--oldi |
--old |
--ol |
--o)
254 ac_prev
=oldincludedir
;;
255 -oldincludedir=* |
--oldincludedir=* |
--oldincludedi=* |
--oldincluded=* \
256 |
--oldinclude=* |
--oldinclud=* |
--oldinclu=* |
--oldincl=* |
--oldinc=* \
257 |
--oldin=* |
--oldi=* |
--old=* |
--ol=* |
--o=*)
258 oldincludedir
="$ac_optarg" ;;
260 -prefix |
--prefix |
--prefi |
--pref |
--pre |
--pr |
--p)
262 -prefix=* |
--prefix=* |
--prefi=* |
--pref=* |
--pre=* |
--pr=* |
--p=*)
263 prefix
="$ac_optarg" ;;
265 -program-prefix |
--program-prefix |
--program-prefi |
--program-pref \
266 |
--program-pre |
--program-pr |
--program-p)
267 ac_prev
=program_prefix
;;
268 -program-prefix=* |
--program-prefix=* |
--program-prefi=* \
269 |
--program-pref=* |
--program-pre=* |
--program-pr=* |
--program-p=*)
270 program_prefix
="$ac_optarg" ;;
272 -program-suffix |
--program-suffix |
--program-suffi |
--program-suff \
273 |
--program-suf |
--program-su |
--program-s)
274 ac_prev
=program_suffix
;;
275 -program-suffix=* |
--program-suffix=* |
--program-suffi=* \
276 |
--program-suff=* |
--program-suf=* |
--program-su=* |
--program-s=*)
277 program_suffix
="$ac_optarg" ;;
279 -program-transform-name |
--program-transform-name \
280 |
--program-transform-nam |
--program-transform-na \
281 |
--program-transform-n |
--program-transform- \
282 |
--program-transform |
--program-transfor \
283 |
--program-transfo |
--program-transf \
284 |
--program-trans |
--program-tran \
285 |
--progr-tra |
--program-tr |
--program-t)
286 ac_prev
=program_transform_name
;;
287 -program-transform-name=* |
--program-transform-name=* \
288 |
--program-transform-nam=* |
--program-transform-na=* \
289 |
--program-transform-n=* |
--program-transform-=* \
290 |
--program-transform=* |
--program-transfor=* \
291 |
--program-transfo=* |
--program-transf=* \
292 |
--program-trans=* |
--program-tran=* \
293 |
--progr-tra=* |
--program-tr=* |
--program-t=*)
294 program_transform_name
="$ac_optarg" ;;
296 -q |
-quiet |
--quiet |
--quie |
--qui |
--qu |
--q \
297 |
-silent |
--silent |
--silen |
--sile |
--sil)
300 -sbindir |
--sbindir |
--sbindi |
--sbind |
--sbin |
--sbi |
--sb)
302 -sbindir=* |
--sbindir=* |
--sbindi=* |
--sbind=* |
--sbin=* \
304 sbindir
="$ac_optarg" ;;
306 -sharedstatedir |
--sharedstatedir |
--sharedstatedi \
307 |
--sharedstated |
--sharedstate |
--sharedstat |
--sharedsta \
308 |
--sharedst |
--shareds |
--shared |
--share |
--shar \
310 ac_prev
=sharedstatedir
;;
311 -sharedstatedir=* |
--sharedstatedir=* |
--sharedstatedi=* \
312 |
--sharedstated=* |
--sharedstate=* |
--sharedstat=* |
--sharedsta=* \
313 |
--sharedst=* |
--shareds=* |
--shared=* |
--share=* |
--shar=* \
315 sharedstatedir
="$ac_optarg" ;;
317 -site |
--site |
--sit)
319 -site=* |
--site=* |
--sit=*)
322 -srcdir |
--srcdir |
--srcdi |
--srcd |
--src |
--sr)
324 -srcdir=* |
--srcdir=* |
--srcdi=* |
--srcd=* |
--src=* |
--sr=*)
325 srcdir
="$ac_optarg" ;;
327 -sysconfdir |
--sysconfdir |
--sysconfdi |
--sysconfd |
--sysconf \
328 |
--syscon |
--sysco |
--sysc |
--sys |
--sy)
329 ac_prev
=sysconfdir
;;
330 -sysconfdir=* |
--sysconfdir=* |
--sysconfdi=* |
--sysconfd=* |
--sysconf=* \
331 |
--syscon=* |
--sysco=* |
--sysc=* |
--sys=* |
--sy=*)
332 sysconfdir
="$ac_optarg" ;;
334 -target |
--target |
--targe |
--targ |
--tar |
--ta |
--t)
336 -target=* |
--target=* |
--targe=* |
--targ=* |
--tar=* |
--ta=* |
--t=*)
337 target
="$ac_optarg" ;;
339 -v |
-verbose |
--verbose |
--verbos |
--verbo |
--verb)
342 -version |
--version |
--versio |
--versi |
--vers)
343 echo "configure generated by autoconf version 2.12"
347 ac_package
=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
348 # Reject names that are not valid shell variable names.
349 if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
350 { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
352 ac_package
=`echo $ac_package| sed 's/-/_/g'`
357 eval "with_${ac_package}='$ac_optarg'" ;;
359 -without-* |
--without-*)
360 ac_package
=`echo $ac_option|sed -e 's/-*without-//'`
361 # Reject names that are not valid shell variable names.
362 if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
363 { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
365 ac_package
=`echo $ac_package| sed 's/-/_/g'`
366 eval "with_${ac_package}=no" ;;
369 # Obsolete; use --with-x.
372 -x-includes |
--x-includes |
--x-include |
--x-includ |
--x-inclu \
373 |
--x-incl |
--x-inc |
--x-in |
--x-i)
374 ac_prev
=x_includes
;;
375 -x-includes=* |
--x-includes=* |
--x-include=* |
--x-includ=* |
--x-inclu=* \
376 |
--x-incl=* |
--x-inc=* |
--x-in=* |
--x-i=*)
377 x_includes
="$ac_optarg" ;;
379 -x-libraries |
--x-libraries |
--x-librarie |
--x-librari \
380 |
--x-librar |
--x-libra |
--x-libr |
--x-lib |
--x-li |
--x-l)
381 ac_prev
=x_libraries
;;
382 -x-libraries=* |
--x-libraries=* |
--x-librarie=* |
--x-librari=* \
383 |
--x-librar=* |
--x-libra=* |
--x-libr=* |
--x-lib=* |
--x-li=* |
--x-l=*)
384 x_libraries
="$ac_optarg" ;;
386 -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
390 if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
391 echo "configure: warning: $ac_option: invalid host type" 1>&2
393 if test "x$nonopt" != xNONE
; then
394 { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
402 if test -n "$ac_prev"; then
403 { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
406 trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
408 # File descriptor usage:
411 # 2 errors and warnings
412 # 3 some systems may open it to /dev/tty
413 # 4 used on the Kubota Titan
414 # 6 checking for... messages and results
415 # 5 compiler messages saved in config.log
416 if test "$silent" = yes; then
424 This file contains any messages produced by compilers while
425 running configure, to aid debugging if configure makes a mistake.
428 # Strip out --no-create and --no-recursion so they do not pile up.
429 # Also quote any args containing shell metacharacters.
434 -no-create |
--no-create |
--no-creat |
--no-crea |
--no-cre \
435 |
--no-cr |
--no-c) ;;
436 -no-recursion |
--no-recursion |
--no-recursio |
--no-recursi \
437 |
--no-recurs |
--no-recur |
--no-recu |
--no-rec |
--no-re |
--no-r) ;;
438 *" "*|
*" "*|
*[\
[\
]\~\
#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
439 ac_configure_args
="$ac_configure_args '$ac_arg'" ;;
440 *) ac_configure_args
="$ac_configure_args $ac_arg" ;;
445 # Only set these to C if already set. These must not be set unconditionally
446 # because not all systems understand e.g. LANG=C (notably SCO).
447 # Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
448 # Non-C LC_CTYPE values break the ctype check.
449 if test "${LANG+set}" = set; then LANG
=C
; export LANG
; fi
450 if test "${LC_ALL+set}" = set; then LC_ALL
=C
; export LC_ALL
; fi
451 if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES
=C
; export LC_MESSAGES
; fi
452 if test "${LC_CTYPE+set}" = set; then LC_CTYPE
=C
; export LC_CTYPE
; fi
454 # confdefs.h avoids OS command line length limits that DEFS can exceed.
455 rm -rf conftest
* confdefs.h
456 # AIX cpp loses on an empty file, so make sure it contains at least a newline.
459 # A filename unique to this package, relative to the directory that
460 # configure is in, which we can look for to find out if srcdir is correct.
463 # Find the source files, if location was not specified.
464 if test -z "$srcdir"; then
465 ac_srcdir_defaulted
=yes
466 # Try the directory containing this script, then its parent.
468 ac_confdir
=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
469 test "x$ac_confdir" = "x$ac_prog" && ac_confdir
=.
471 if test ! -r $srcdir/$ac_unique_file; then
475 ac_srcdir_defaulted
=no
477 if test ! -r $srcdir/$ac_unique_file; then
478 if test "$ac_srcdir_defaulted" = yes; then
479 { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
481 { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
484 srcdir
=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
486 # Prefer explicitly selected file to automatically selected ones.
487 if test -z "$CONFIG_SITE"; then
488 if test "x$prefix" != xNONE
; then
489 CONFIG_SITE
="$prefix/share/config.site $prefix/etc/config.site"
491 CONFIG_SITE
="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
494 for ac_site_file
in $CONFIG_SITE; do
495 if test -r "$ac_site_file"; then
496 echo "loading site script $ac_site_file"
501 if test -r "$cache_file"; then
502 echo "loading cache $cache_file"
505 echo "creating cache $cache_file"
510 # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
511 ac_cpp
='$CPP $CPPFLAGS'
512 ac_compile
='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
513 ac_link
='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
514 cross_compiling
=$ac_cv_prog_cc_cross
516 if (echo "testing\c"; echo 1,2,3) |
grep c
>/dev
/null
; then
517 # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
518 if (echo -n testing
; echo 1,2,3) |
sed s
/-n/xn
/ |
grep xn
>/dev
/null
; then
525 ac_n
= ac_c
='\c' ac_t
=
529 # Check whether --enable-bfd-assembler or --disable-bfd-assembler was given.
530 if test "${enable_bfd_assembler+set}" = set; then
531 enableval
="$enable_bfd_assembler"
532 case "${enableval}" in
533 yes) need_bfd
=yes user_bfd_gas
=yes ;;
534 no
) user_bfd_gas
=no
;;
535 *) { echo "configure: error: bad value ${enableval} given for bfd-assembler option" 1>&2; exit 1; } ;;
538 # Check whether --enable-targets or --disable-targets was given.
539 if test "${enable_targets+set}" = set; then
540 enableval
="$enable_targets"
541 case "${enableval}" in
542 yes |
"") { echo "configure: error: enable-targets option must specify target names or 'all'" 1>&2; exit 1; }
544 no
) enable_targets
= ;;
545 *) enable_targets
=$enableval ;;
548 # Check whether --enable-shared or --disable-shared was given.
549 if test "${enable_shared+set}" = set; then
550 enableval
="$enable_shared"
551 case "${enableval}" in
552 yes) shared
=true shared_bfd
=true shared_opcodes
=true
;;
554 *bfd
*opcodes
*) shared
=true shared_bfd
=true shared_opcodes
=true
;;
555 *opcodes
*bfd
*) shared
=true shared_bfd
=true shared_opcodes
=true
;;
556 *bfd
*) shared
=true shared_bfd
=true
;;
557 *opcodes
*) shared
=true shared_opcodes
=true
;;
561 # Check whether --enable-commonbfdlib or --disable-commonbfdlib was given.
562 if test "${enable_commonbfdlib+set}" = set; then
563 enableval
="$enable_commonbfdlib"
564 case "${enableval}" in
565 yes) commonbfdlib
=true
;;
566 no
) commonbfdlib
=false
;;
567 *) { echo "configure: error: bad value ${enableval} for BFD commonbfdlib option" 1>&2; exit 1; } ;;
571 # Generate a header file -- gets more post-processing by Makefile later.
575 for ac_dir
in `cd $srcdir;pwd`/..
$srcdir/`cd $srcdir;pwd`/..
; do
576 if test -f $ac_dir/install-sh
; then
578 ac_install_sh
="$ac_aux_dir/install-sh -c"
580 elif test -f $ac_dir/install.sh
; then
582 ac_install_sh
="$ac_aux_dir/install.sh -c"
586 if test -z "$ac_aux_dir"; then
587 { echo "configure: error: can not find install-sh or install.sh in `cd $srcdir;pwd`/.. $srcdir/`cd $srcdir;pwd`/.." 1>&2; exit 1; }
589 ac_config_guess
=$ac_aux_dir/config.guess
590 ac_config_sub
=$ac_aux_dir/config.sub
591 ac_configure
=$ac_aux_dir/configure
# This should be Cygnus configure.
594 # Do some error checking and defaulting for the host and target type.
596 # configure --host=HOST --target=TARGET --build=BUILD NONOPT
599 # 1. You are not allowed to specify --host, --target, and nonopt at the
601 # 2. Host defaults to nonopt.
602 # 3. If nonopt is not specified, then host defaults to the current host,
603 # as determined by config.guess.
604 # 4. Target and build default to nonopt.
605 # 5. If nonopt is not specified, then target and build default to host.
607 # The aliases save the names the user supplied, while $host etc.
608 # will get canonicalized.
609 case $host---$target---$nonopt in
610 NONE---
*---* |
*---NONE---* |
*---*---NONE) ;;
611 *) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
615 # Make sure we can run config.sub.
616 if $ac_config_sub sun4
>/dev
/null
2>&1; then :
617 else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
620 echo $ac_n "checking host system type""... $ac_c" 1>&6
621 echo "configure:622: checking host system type" >&5
624 case "$host_alias" in
628 if host_alias
=`$ac_config_guess`; then :
629 else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
631 *) host_alias
=$nonopt ;;
635 host=`$ac_config_sub $host_alias`
636 host_cpu
=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
637 host_vendor
=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
638 host_os
=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
639 echo "$ac_t""$host" 1>&6
641 echo $ac_n "checking target system type""... $ac_c" 1>&6
642 echo "configure:643: checking target system type" >&5
645 case "$target_alias" in
648 NONE
) target_alias
=$host_alias ;;
649 *) target_alias
=$nonopt ;;
653 target
=`$ac_config_sub $target_alias`
654 target_cpu
=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
655 target_vendor
=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
656 target_os
=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
657 echo "$ac_t""$target" 1>&6
659 echo $ac_n "checking build system type""... $ac_c" 1>&6
660 echo "configure:661: checking build system type" >&5
663 case "$build_alias" in
666 NONE
) build_alias
=$host_alias ;;
667 *) build_alias
=$nonopt ;;
671 build
=`$ac_config_sub $build_alias`
672 build_cpu
=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
673 build_vendor
=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
674 build_os
=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
675 echo "$ac_t""$build" 1>&6
677 test "$host_alias" != "$target_alias" &&
678 test "$program_prefix$program_suffix$program_transform_name" = \
680 program_prefix
=${target_alias}-
682 if test "$program_transform_name" = s
,x
,x
,; then
683 program_transform_name
=
685 # Double any \ or $. echo might interpret backslashes.
686 cat <<\EOF_SED
> conftestsed
687 s
,\\,\\\\,g
; s
,\$
,$$
,g
689 program_transform_name
="`echo $program_transform_name|sed -f conftestsed`"
692 test "$program_prefix" != NONE
&&
693 program_transform_name
="s,^,${program_prefix},; $program_transform_name"
694 # Use a double $ so make ignores it.
695 test "$program_suffix" != NONE
&&
696 program_transform_name
="s,\$\$,${program_suffix},; $program_transform_name"
698 # sed with no file args requires a program.
699 test "$program_transform_name" = "" && program_transform_name
="s,x,x,"
705 if test -n "$enable_targets" ; then
706 for t
in `echo $enable_targets | sed 's/,/ /g'`; do
707 result
=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $t 2>/dev/null`
708 if test -n "$result" ; then
709 canon_targets
="$canon_targets $result"
711 # # Permit "all", etc. We don't support it yet though.
712 # canon_targets="$canon_targets $t"
715 _gas_uniq_list
="$canon_targets"
717 for _gas_uniq_i
in _gas_uniq_dummy
$_gas_uniq_list ; do
720 *) case " $_gas_uniq_newlist " in
721 *" $_gas_uniq_i "*) ;;
722 *) _gas_uniq_newlist
="$_gas_uniq_newlist $_gas_uniq_i" ;;
726 canon_targets
=$_gas_uniq_newlist
732 for this_target
in $target $canon_targets ; do
734 eval `echo $this_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/cpu=\1 vendor=\2 os=\3/'`
736 # check for architecture variants
738 armeb
) cpu_type
=arm endian
=big
;;
739 arm
*) cpu_type
=arm endian
=little
;;
740 thumb
*) cpu_type
=arm endian
=little
;;
741 hppa
*) cpu_type
=hppa
;;
742 i
[456]86) cpu_type
=i386
;;
743 m680
[012346]0) cpu_type
=m68k
;;
744 m68008
) cpu_type
=m68k
;;
745 m683??
) cpu_type
=m68k
;;
746 m8
*) cpu_type
=m88k
;;
747 mips
*el
) cpu_type
=mips endian
=little
;;
748 mips
*) cpu_type
=mips endian
=big
;;
749 powerpcle
*) cpu_type
=ppc endian
=little
;;
750 powerpc
*) cpu_type
=ppc endian
=big
;;
751 rs6000
*) cpu_type
=ppc
;;
752 sparc64
) cpu_type
=sparc want_sparc_v9
=true
;;
753 sparc
*) cpu_type
=sparc
;;
754 *) cpu_type
=${cpu} ;;
757 if test ${this_target} = $target ; then
758 target_cpu_type
=${cpu_type}
759 elif test ${target_cpu_type} != ${cpu_type} ; then
764 generic_target
=${cpu_type}-$vendor-$os
769 # assign object format
770 case ${generic_target} in
771 a29k-
*-coff) fmt=coff targ
=ebmon29k
;;
772 a29k-amd-udi
) fmt=coff targ
=ebmon29k
;;
773 a29k-amd-ebmon
) fmt=coff targ
=ebmon29k
;;
774 a29k-nyu-sym1
) fmt=coff targ
=ebmon29k
;;
775 a29k-
*-vxworks*) fmt=coff
;;
777 alpha-
*-*vms
*) fmt=evax
;;
778 alpha-
*-netware*) fmt=ecoff
;;
779 alpha-
*-openbsd*) fmt=ecoff
;;
780 alpha-
*-osf*) fmt=ecoff
;;
781 alpha-
*-linuxecoff*) fmt=ecoff
;;
782 alpha-
*-linux*) fmt=elf em
=linux
;;
785 arc-
*-elf*) fmt=elf bfd_gas
=yes ;;
788 arm-
*-riscix*) fmt=aout targ
=arm-lit em
=riscix
;;
795 arm-
*-coff | thumb-
*-coff) fmt=coff
;;
796 arm-
*-riscix*) fmt=aout
;;
797 arm-
*-pe) fmt=coff targ
=armcoff em
=pe
;;
799 d10v-
*-*) fmt=elf bfd_gas
=yes ;;
800 # start-sanitize-d30v
801 d30v-
*-*) fmt=elf bfd_gas
=yes ;;
804 hppa-
*-*elf
*) fmt=elf em
=hppa
;;
805 hppa-
*-lites*) fmt=elf em
=hppa
;;
806 hppa-
*-osf*) fmt=som em
=hppa
;;
807 hppa-
*-rtems*) fmt=elf em
=hppa
;;
808 hppa-
*-hpux*) fmt=som em
=hppa
;;
809 hppa-
*-bsd*) fmt=som em
=hppa
;;
810 hppa-
*-hiux*) fmt=som em
=hppa
;;
812 h8300-
*-coff) fmt=coff
;;
814 i386-ibm-aix
*) fmt=coff targ
=i386coff
816 i386-sequent-bsd
*) fmt=aout em
=dynix bfd_gas
=yes ;;
817 i386-
*-bsd*) fmt=aout em
=386bsd
;;
818 i386-
*-netbsd0.8
) fmt=aout em
=386bsd
;;
819 i386-
*-netbsd*) fmt=aout em
=nbsd bfd_gas
=yes;;
820 i386-
*-openbsd*) fmt=aout em
=nbsd bfd_gas
=yes;;
821 i386-
*-linux*aout
* | i386-
*-linuxoldld) fmt=aout em
=linux
;;
822 i386-
*-linux*coff
*) fmt=coff em
=linux
824 i386-
*-linux*) fmt=elf em
=linux
;;
825 i386-
*-lynxos*) fmt=coff targ
=i386coff
827 i386-
*-sysv4* | i386-
*-solaris* | i386-
*-elf | i386-
*-freebsdelf*)
829 i386-
*-sco*elf
*) fmt=elf targ
=sco5
;;
830 i386-
*-coff | i386-
*-sysv* | i386-
*-sco* | i386-
*-isc*)
831 fmt=coff targ
=i386coff
;;
832 i386-
*-vsta) fmt=aout
;;
833 i386-
*-go32) fmt=coff targ
=i386coff
;;
834 i386-
*-rtems*) fmt=coff targ
=i386coff
;;
835 i386-
*-gnu*) fmt=elf
;;
837 fmt=aout em
=mach bfd_gas
=yes ;;
838 i386-
*-msdos*) fmt=aout
;;
839 i386-
*-moss*) fmt=elf
;;
840 i386-
*-pe) fmt=coff targ
=i386coff em
=pe
;;
841 i386-
*-cygwin32) fmt=coff targ
=i386coff em
=pe bfd_gas
=yes ;;
842 i386-
*-*nt
) fmt=coff targ
=i386coff em
=pe
;;
843 i960-
*-bout) fmt=bout
;;
844 i960-
*-coff) fmt=coff em
=ic960 targ
=ic960coff
;;
845 i960-
*-rtems*) fmt=coff em
=ic960 targ
=ic960coff
;;
846 i960-
*-nindy*) fmt=bout
;;
847 i960-
*-vxworks4*) fmt=bout
;;
848 i960-
*-vxworks5.0
) fmt=bout
;;
849 i960-
*-vxworks5.
*) fmt=coff em
=ic960 targ
=ic960coff
;;
850 i960-
*-vxworks*) fmt=bout
;;
852 m32r-
*-*) fmt=elf bfd_gas
=yes ;;
854 m68k-
*-vxworks* | m68k-ericsson-ose | m68k-
*-sunos*)
856 m68k-motorola-sysv
*) fmt=coff targ
=m68kcoff em
=delta
;;
857 m68k-bull-sysv3
*) fmt=coff targ
=m68kcoff em
=dpx2
;;
858 m68k-apollo-
*) fmt=coff targ
=apollo em
=apollo
;;
859 m68k-
*-sysv4*) # must be before -sysv*
861 m68k-
*-elf*) fmt=elf
;;
862 m68k-
*-coff | m68k-
*-sysv* | m68k-
*-rtems*)
863 fmt=coff targ
=m68kcoff
;;
864 m68k-
*-hpux*) fmt=hp300 em
=hp300
;;
865 m68k-
*-linux*aout
*) fmt=aout em
=linux
;;
866 m68k-
*-linux*) fmt=elf em
=linux
;;
867 m68k-
*-lynxos*) fmt=coff targ
=m68kcoff
869 m68k-
*-netbsd*) fmt=aout em
=nbsd bfd_gas
=yes ;;
870 m68k-
*-openbsd*) fmt=aout em
=nbsd bfd_gas
=yes ;;
871 m68k-apple-aux
*) fmt=coff targ
=m68kcoff em
=aux
;;
872 m68k-
*-psos*) fmt=elf em
=psos
;;
874 m88k-motorola-sysv3
*) fmt=coff targ
=m88kcoff em
=delt88
;;
875 m88k-
*-coff*) fmt=coff targ
=m88kcoff
;;
877 # don't change em like *-*-bsd does
878 mips-dec-netbsd
*) fmt=elf targ
=mips-lit endian
=little
;;
879 mips-dec-openbsd
*) fmt=elf targ
=mips-lit endian
=little
;;
880 mips-dec-bsd
*) fmt=aout targ
=mips-lit
;;
881 mips-sony-bsd
*) fmt=ecoff targ
=mips-big
;;
882 mips-
*-bsd*) { echo "configure: error: Unknown vendor for mips-bsd configuration." 1>&2; exit 1; } ;;
883 mips-
*-ultrix*) fmt=ecoff targ
=mips-lit endian
=little
;;
884 mips-
*-osf*) fmt=ecoff targ
=mips-lit endian
=little
;;
885 mips-
*-ecoff*) fmt=ecoff
887 big
) targ
=mips-big
;;
891 mips-
*-ecoff*) fmt=ecoff targ
=mips-big
;;
892 mips-
*-irix6*) fmt=elf targ
=mips-big
;;
893 mips-
*-irix5*) fmt=elf targ
=mips-big
;;
894 mips-
*-irix*) fmt=ecoff targ
=mips-big
;;
895 mips-
*-lnews*) fmt=ecoff targ
=mips-lit em
=lnews
;;
896 mips-
*-riscos*) fmt=ecoff targ
=mips-big
;;
897 mips-
*-sysv*) fmt=ecoff targ
=mips-big
;;
898 mips-
*-elf* | mips-
*-rtems* | mips-
*-linux* | mips-
*-gnu* | mips-
*-openbsd*)
901 big
) targ
=mips-big
;;
905 mn10200-
*-*) fmt=elf bfd_gas
=yes ;;
906 mn10300-
*-*) fmt=elf bfd_gas
=yes ;;
907 ppc-
*-pe | ppc-
*-cygwin32 | ppc-
*-winnt*)
914 ppc-
*-aix*) fmt=coff
;;
915 ppc-
*-beos*) fmt=coff
;;
916 ppc-
*-*bsd
* | ppc-
*-elf* | ppc-
*-eabi* | ppc-
*-sysv4*)
923 ppc-
*-linux*) fmt=elf
926 *) { echo "configure: error: Linux must be configured big endian" 1>&2; exit 1; } ;;
929 ppc-
*-solaris*) fmt=elf
931 big
) { echo "configure: error: Solaris must be configured little endian" 1>&2; exit 1; } ;;
942 ppc-
*-macos* | ppc-
*-mpw*)
944 ppc-
*-netware*) fmt=elf em
=ppcnw
;;
946 sh-
*-elf*) fmt=elf
;;
947 sh-
*-coff*) fmt=coff
;;
949 ns32k-pc532-mach
* | ns32k-pc532-ux
*) fmt=aout em
=pc532mach
;;
950 ns32k-pc532-netbsd
* | ns32k-pc532-lites
*) fmt=aout em
=nbsd532
;;
951 ns32k-pc532-openbsd
*) fmt=aout em
=nbsd532
;;
953 sparc-
*-rtems*) fmt=aout
;;
954 sparc-
*-sunos4*) fmt=aout em
=sun3
;;
955 sparc-
*-aout | sparc
*-*-vxworks*)
956 fmt=aout em
=sparcaout
;;
957 sparc-
*-coff) fmt=coff
;;
958 sparc-
*-linux*aout
*) fmt=aout em
=linux
;;
959 sparc-
*-linux*) fmt=elf em
=linux
;;
960 sparc-
*-lynxos*) fmt=coff em
=lynx
;;
961 sparc-fujitsu-none
) fmt=aout
;;
962 sparc-
*-elf | sparc-
*-sysv4* | sparc-
*-solaris*)
964 sparc-
*-netbsd*) fmt=aout em
=nbsd bfd_gas
=yes ;;
965 sparc-
*-openbsd*) fmt=aout em
=nbsd bfd_gas
=yes ;;
967 # start-sanitize-tic80
968 tic80-
*-*) fmt=coff targ
=tic80coff
;;
970 # start-sanitize-v850
971 v850-
*-*) fmt=elf bfd_gas
=yes ;;
974 vax-
*-bsd* | vax-
*-ultrix*)
976 vax-
*-vms) fmt=vms
;;
978 z8k-
*-coff | z8k-
*-sim)
983 *-*-aout |
*-*-scout)
989 *-*-generic) fmt=generic
;;
990 *-*-xray |
*-*-hms) fmt=coff
;;
992 *-*-elf |
*-*-sysv4* |
*-*-solaris*)
993 echo "configure: warning: GAS support for ${generic_target} is incomplete." 1>&2
995 *-*-vxworks) fmt=aout
;;
996 *-*-netware) fmt=elf
;;
999 case ${cpu_type}-${fmt} in
1000 alpha-
*) bfd_gas
=yes ;;
1001 arm-
*) bfd_gas
=yes ;;
1003 # i386-aout) bfd_gas=preferred ;;
1004 mips-
*) bfd_gas
=yes ;;
1005 ns32k-
*) bfd_gas
=yes ;;
1006 ppc-
*) bfd_gas
=yes ;;
1007 sparc-
*) bfd_gas
=yes ;;
1008 *-elf) bfd_gas
=yes ;;
1009 *-ecoff) bfd_gas
=yes ;;
1010 *-som) bfd_gas
=yes ;;
1014 # Other random stuff.
1016 # do we need the opcodes library?
1022 if test "${shared_opcodes}" = "true"; then
1023 # A shared libopcodes must be linked against libbfd.
1029 test -n "$want_sparc_v9" && cat >> confdefs.h
<<\EOF
1034 case ${cpu}-${vendor}-${os} in
1035 sparc64-
*-elf*) cat >> confdefs.h
<<\EOF
1036 #define SPARC_ARCH64 1
1043 case ${extra_objects} in
1045 *) extra_objects
="$extra_objects cgen.o"
1046 cat >> confdefs.h
<<\EOF
1047 #define USING_CGEN 1
1055 case ${extra_objects} in
1057 *) extra_objects
="$extra_objects m68k-parse.o" ;;
1062 echo ${extra_objects} |
grep -s "itbl-parse.o"
1063 if test $?
-ne 0 ; then
1064 extra_objects
="$extra_objects itbl-parse.o"
1067 echo ${extra_objects} |
grep -s "itbl-lex.o"
1068 if test $?
-ne 0 ; then
1069 extra_objects
="$extra_objects itbl-lex.o"
1072 echo ${extra_objects} |
grep -s "itbl-ops.o"
1073 if test $?
-ne 0 ; then
1074 extra_objects
="$extra_objects itbl-ops.o"
1082 # See if we really can support this configuration with the emulation code.
1084 if test $this_target = $target ; then
1085 primary_bfd_gas
=$bfd_gas
1090 if test $bfd_gas = no
; then
1091 # Can't support other configurations this way.
1094 elif test $bfd_gas = no
; then
1095 # Can't support this configuration.
1099 # From target name and format, produce a list of supported emulations.
1101 case ${generic_target}-${fmt} in
1102 mips-
*-irix5*-*) emulation
="mipsbelf mipslelf mipself mipsbecoff mipslecoff mipsecoff" ;;
1103 mips-
*-linux*-*) case "$endian" in
1104 big
) emulation
="mipsbelf mipslelf mipself mipsbecoff mipslecoff mipsecoff" ;;
1105 *) emulation
="mipslelf mipsbelf mipself mipslecoff mipsbecoff mipsecoff" ;;
1107 mips-
*-lnews*-ecoff) ;;
1108 mips-
*-*-ecoff) case "$endian" in
1109 big
) emulation
="mipsbecoff mipslecoff mipsecoff" ;;
1110 *) emulation
="mipslecoff mipsbecoff mipsecoff" ;;
1112 mips-
*-*-elf) case "$endian" in
1113 big
) emulation
="mipsbelf mipslelf mipself" ;;
1114 *) emulation
="mipslelf mipsbelf mipself" ;;
1115 # Uncommenting the next line will turn on support for i386 COFF
1116 # in any i386 ELF configuration. This probably doesn't work
1118 # i386-*-*-elf) emulation="i386coff i386elf" ;;
1122 emulations
="$emulations $emulation"
1126 # Assign floating point type. Most processors with FP support
1127 # IEEE FP. On those that don't support FP at all, usually IEEE
1129 case ${target_cpu} in
1130 vax | tahoe
) atof
=${target_cpu} ;;
1134 case "${obj_format}" in
1135 "") { echo "configure: error: GAS does not know what format to use for target ${target}" 1>&2; exit 1; } ;;
1139 if test ! -r ${srcdir}/config
/tc-
${target_cpu_type}.c
; then
1140 { echo "configure: error: GAS does not support target CPU ${target_cpu_type}" 1>&2; exit 1; }
1143 if test ! -r ${srcdir}/config
/obj-
${obj_format}.c
; then
1144 { echo "configure: error: GAS does not have support for object file format ${obj_format}" 1>&2; exit 1; }
1147 # and target makefile frag
1149 target_frag
=${srcdir}/config
/${gas_target}.mt
1150 if test ! -r ${target_frag}; then
1151 target_frag
=/dev
/null
# ick! but subst_file can't be conditionalized
1155 case ${user_bfd_gas}-${primary_bfd_gas} in
1157 # We didn't override user's choice.
1160 echo "configure: warning: Use of BFD is required for ${target}; overriding config options." 1>&2
1172 # User specified nothing.
1176 # Some COFF configurations want these random other flags set.
1177 case ${obj_format} in
1179 case ${target_cpu_type} in
1180 i386
) cat >> confdefs.h
<<\EOF
1184 m68k
) cat >> confdefs.h
<<\EOF
1188 m88k
) cat >> confdefs.h
<<\EOF
1196 # Getting this done right is going to be a bitch. Each configuration specified
1197 # with --enable-targets=... should be checked for environment, format, cpu, and
1200 # For each configuration, the necessary object file support code must be linked
1201 # in. This might be only one, it might be up to four. The necessary emulation
1202 # code needs to be provided, too.
1204 # And then there's "--enable-targets=all"....
1206 # For now, just always do it for MIPS ELF or ECOFF configurations. Sigh.
1208 formats
="${obj_format}"
1211 _gas_uniq_list
="$emulations"
1212 _gas_uniq_newlist
=""
1213 for _gas_uniq_i
in _gas_uniq_dummy
$_gas_uniq_list ; do
1214 case $_gas_uniq_i in
1216 *) case " $_gas_uniq_newlist " in
1217 *" $_gas_uniq_i "*) ;;
1218 *) _gas_uniq_newlist
="$_gas_uniq_newlist $_gas_uniq_i" ;;
1222 emulations
=$_gas_uniq_newlist
1224 for em
in .
$emulations ; do
1227 mipsbelf | mipslelf
)
1228 fmt=elf
file=mipself
;;
1229 mipsbecoff | mipslecoff
)
1230 fmt=ecoff
file=mipsecoff
;;
1232 fmt=coff
file=i386coff
;;
1234 fmt=elf
file=i386elf
;;
1236 formats
="$formats $fmt"
1237 emfiles
="$emfiles e-$file.o"
1238 EMULATIONS
="$EMULATIONS &$em,"
1240 _gas_uniq_list
="$formats"
1241 _gas_uniq_newlist
=""
1242 for _gas_uniq_i
in _gas_uniq_dummy
$_gas_uniq_list ; do
1243 case $_gas_uniq_i in
1245 *) case " $_gas_uniq_newlist " in
1246 *" $_gas_uniq_i "*) ;;
1247 *) _gas_uniq_newlist
="$_gas_uniq_newlist $_gas_uniq_i" ;;
1251 formats
=$_gas_uniq_newlist
1253 _gas_uniq_list
="$emfiles"
1254 _gas_uniq_newlist
=""
1255 for _gas_uniq_i
in _gas_uniq_dummy
$_gas_uniq_list ; do
1256 case $_gas_uniq_i in
1258 *) case " $_gas_uniq_newlist " in
1259 *" $_gas_uniq_i "*) ;;
1260 *) _gas_uniq_newlist
="$_gas_uniq_newlist $_gas_uniq_i" ;;
1264 emfiles
=$_gas_uniq_newlist
1266 if test `set . $formats ; shift ; echo $#` -gt 1 ; then
1267 for fmt in $formats ; do
1269 aout
) cat >> confdefs.h
<<\EOF
1270 #define OBJ_MAYBE_AOUT 1
1273 bout
) cat >> confdefs.h
<<\EOF
1274 #define OBJ_MAYBE_BOUT 1
1277 coff
) cat >> confdefs.h
<<\EOF
1278 #define OBJ_MAYBE_COFF 1
1281 ecoff
) cat >> confdefs.h
<<\EOF
1282 #define OBJ_MAYBE_ECOFF 1
1285 elf
) cat >> confdefs.h
<<\EOF
1286 #define OBJ_MAYBE_ELF 1
1289 generic
) cat >> confdefs.h
<<\EOF
1290 #define OBJ_MAYBE_GENERIC 1
1293 hp300
) cat >> confdefs.h
<<\EOF
1294 #define OBJ_MAYBE_HP300 1
1297 ieee
) cat >> confdefs.h
<<\EOF
1298 #define OBJ_MAYBE_IEEE 1
1301 som
) cat >> confdefs.h
<<\EOF
1302 #define OBJ_MAYBE_SOM 1
1305 vms
) cat >> confdefs.h
<<\EOF
1306 #define OBJ_MAYBE_VMS 1
1310 extra_objects
="$extra_objects obj-$fmt.o"
1314 if test `set . $emfiles ; shift ; echo $#` -gt 0 ; then
1316 extra_objects
="$extra_objects $emfiles"
1317 DEFAULT_EMULATION
=`set . $emulations ; echo $2`
1318 cat >> confdefs.h
<<\EOF
1319 #define USE_EMULATIONS 1
1324 cat >> confdefs.h
<<EOF
1325 #define EMULATIONS $EMULATIONS
1328 cat >> confdefs.h
<<EOF
1329 #define DEFAULT_EMULATION "$DEFAULT_EMULATION"
1333 case ${primary_bfd_gas}-${target_cpu_type}-${obj_format} in
1334 yes-
*-coff) need_bfd
=yes ;;
1335 no-
*-coff) need_bfd
=yes
1336 cat >> confdefs.h
<<\EOF
1337 #define MANY_SEGMENTS 1
1342 reject_dev_configs
=yes
1344 case ${reject_dev_configs}-${dev} in
1346 { echo "configure: error: GAS does not support the ${generic_target} configuration." 1>&2; exit 1; }
1355 case "${primary_bfd_gas}" in
1356 yes) cat >> confdefs.h
<<\EOF
1357 #define BFD_ASSEMBLER 1
1363 # do we need the opcodes library?
1364 case "${need_opcodes}" in
1366 OPCODES_DEP
=..
/opcodes
/libopcodes.a
1367 OPCODES_LIB
='-L../opcodes -lopcodes'
1369 # We need to handle some special cases for shared libraries.
1372 # On SunOS, we must link against the name we are going to install,
1373 # not -lbfd, since SunOS does not support SONAME.
1374 if test "${shared_opcodes}" = "true"; then
1375 OPCODES_LIB
='-L../opcodes -l`echo opcodes | sed '"'"'$(program_transform_name)'"'"'`'
1379 # On Alpha OSF/1, the native linker searches all the -L
1380 # directories for any LIB.so files, and only then searches for any
1381 # LIB.a files. That means that if there is an installed
1382 # libbfd.so, but this build is not done with --enable-shared, the
1383 # link will wind up being against the install libbfd.so rather
1384 # than the newly built libbfd. To avoid this, we must explicitly
1385 # link against libbfd.a when --enable-shared is not used.
1386 if test "${shared_opcodes}" != "true"; then
1387 OPCODES_LIB
='../opcodes/libopcodes.a'
1394 case "${need_bfd}" in
1396 BFDDEP
=..
/bfd
/libbfd.a
1397 BFDLIB
='-L../bfd -lbfd'
1398 ALL_OBJ_DEPS
="$ALL_OBJ_DEPS ../bfd/bfd.h"
1400 # We need to handle some special cases for shared libraries
1403 # On SunOS, we must link against the name we are going to install,
1404 # not -lbfd, since SunOS does not support SONAME.
1405 if test "${shared_bfd}" = "true"; then
1406 BFDLIB
='-L../bfd -l`echo bfd | sed '"'"'$(program_transform_name)'"'"'`'
1410 # On Alpha OSF/1, the native linker searches all the -L
1411 # directories for any LIB.so files, and only then searches for any
1412 # LIB.a files. That means that if there is an installed
1413 # libbfd.so, but this build is not done with --enable-shared, the
1414 # link will wind up being against the install libbfd.so rather
1415 # than the newly built libbfd. To avoid this, we must explicitly
1416 # link against libbfd.a when --enable-shared is not used.
1417 if test "${shared_bfd}" != "true"; then
1418 BFDLIB
='../bfd/libbfd.a'
1423 if test "${commonbfdlib}" = "true"; then
1424 # when a shared libbfd is built with --enable-commonbfdlib,
1425 # all of libopcodes is available in libbfd.so
1438 cat >> confdefs.h
<<EOF
1439 #define TARGET_ALIAS "${target_alias}"
1442 cat >> confdefs.h
<<EOF
1443 #define TARGET_CANONICAL "${target}"
1446 cat >> confdefs.h
<<EOF
1447 #define TARGET_CPU "${target_cpu}"
1450 cat >> confdefs.h
<<EOF
1451 #define TARGET_VENDOR "${target_vendor}"
1454 cat >> confdefs.h
<<EOF
1455 #define TARGET_OS "${target_os}"
1459 # Extract the first word of "gcc", so it can be a program name with args.
1460 set dummy gcc
; ac_word
=$2
1461 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
1462 echo "configure:1463: checking for $ac_word" >&5
1463 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
1464 echo $ac_n "(cached) $ac_c" 1>&6
1466 if test -n "$CC"; then
1467 ac_cv_prog_CC
="$CC" # Let the user override the test.
1469 IFS
="${IFS= }"; ac_save_ifs
="$IFS"; IFS
="${IFS}:"
1470 for ac_dir
in $PATH; do
1471 test -z "$ac_dir" && ac_dir
=.
1472 if test -f $ac_dir/$ac_word; then
1481 if test -n "$CC"; then
1482 echo "$ac_t""$CC" 1>&6
1484 echo "$ac_t""no" 1>&6
1487 if test -z "$CC"; then
1488 # Extract the first word of "cc", so it can be a program name with args.
1489 set dummy cc
; ac_word
=$2
1490 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
1491 echo "configure:1492: checking for $ac_word" >&5
1492 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
1493 echo $ac_n "(cached) $ac_c" 1>&6
1495 if test -n "$CC"; then
1496 ac_cv_prog_CC
="$CC" # Let the user override the test.
1498 IFS
="${IFS= }"; ac_save_ifs
="$IFS"; IFS
="${IFS}:"
1500 for ac_dir
in $PATH; do
1501 test -z "$ac_dir" && ac_dir
=.
1502 if test -f $ac_dir/$ac_word; then
1503 if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
1504 ac_prog_rejected
=yes
1512 if test $ac_prog_rejected = yes; then
1513 # We found a bogon in the path, so make sure we never use it.
1514 set dummy
$ac_cv_prog_CC
1516 if test $# -gt 0; then
1517 # We chose a different compiler from the bogus one.
1518 # However, it has the same basename, so the bogon will be chosen
1519 # first if we set CC to just the basename; use the full file name.
1521 set dummy
"$ac_dir/$ac_word" "$@"
1529 if test -n "$CC"; then
1530 echo "$ac_t""$CC" 1>&6
1532 echo "$ac_t""no" 1>&6
1535 test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
1538 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
1539 echo "configure:1540: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
1542 # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
1543 ac_cpp
='$CPP $CPPFLAGS'
1544 ac_compile
='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
1545 ac_link
='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
1546 cross_compiling
=$ac_cv_prog_cc_cross
1548 cat > conftest.
$ac_ext <<EOF
1549 #line 1550 "configure"
1550 #include "confdefs.h"
1553 if { (eval echo configure
:1554: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest
; then
1554 ac_cv_prog_cc_works
=yes
1555 # If we can't run a trivial program, we are probably using a cross compiler.
1556 if (.
/conftest
; exit) 2>/dev
/null
; then
1557 ac_cv_prog_cc_cross
=no
1559 ac_cv_prog_cc_cross
=yes
1562 echo "configure: failed program was:" >&5
1563 cat conftest.
$ac_ext >&5
1564 ac_cv_prog_cc_works
=no
1568 echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
1569 if test $ac_cv_prog_cc_works = no
; then
1570 { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
1572 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
1573 echo "configure:1574: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
1574 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
1575 cross_compiling
=$ac_cv_prog_cc_cross
1577 echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
1578 echo "configure:1579: checking whether we are using GNU C" >&5
1579 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
1580 echo $ac_n "(cached) $ac_c" 1>&6
1582 cat > conftest.c
<<EOF
1587 if { ac_try
='${CC-cc} -E conftest.c'; { (eval echo configure
:1588: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } |
egrep yes >/dev
/null
2>&1; then
1594 echo "$ac_t""$ac_cv_prog_gcc" 1>&6
1596 if test $ac_cv_prog_gcc = yes; then
1598 ac_test_CFLAGS
="${CFLAGS+set}"
1599 ac_save_CFLAGS
="$CFLAGS"
1601 echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
1602 echo "configure:1603: checking whether ${CC-cc} accepts -g" >&5
1603 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
1604 echo $ac_n "(cached) $ac_c" 1>&6
1606 echo 'void f(){}' > conftest.c
1607 if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
1616 echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
1617 if test "$ac_test_CFLAGS" = set; then
1618 CFLAGS
="$ac_save_CFLAGS"
1619 elif test $ac_cv_prog_cc_g = yes; then
1626 test "${CFLAGS+set}" = set || CFLAGS
="-g"
1629 # Find a good install program. We prefer a C program (faster),
1630 # so one script is as good as another. But avoid the broken or
1631 # incompatible versions:
1632 # SysV /etc/install, /usr/sbin/install
1633 # SunOS /usr/etc/install
1634 # IRIX /sbin/install
1636 # AFS /usr/afsws/bin/install, which mishandles nonexistent args
1637 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
1638 # ./install, which can be erroneously created by make from ./install.sh.
1639 echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
1640 echo "configure:1641: checking for a BSD compatible install" >&5
1641 if test -z "$INSTALL"; then
1642 if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
1643 echo $ac_n "(cached) $ac_c" 1>&6
1645 IFS
="${IFS= }"; ac_save_IFS
="$IFS"; IFS
="${IFS}:"
1646 for ac_dir
in $PATH; do
1647 # Account for people who put trailing slashes in PATH elements.
1649 /|.
/|.
//|
/etc
/*|
/usr
/sbin
/*|
/usr
/etc
/*|
/sbin
/*|
/usr
/afsws
/bin
/*|
/usr
/ucb
/*) ;;
1651 # OSF1 and SCO ODT 3.0 have their own names for install.
1652 for ac_prog
in ginstall installbsd scoinst
install; do
1653 if test -f $ac_dir/$ac_prog; then
1654 if test $ac_prog = install &&
1655 grep dspmsg
$ac_dir/$ac_prog >/dev
/null
2>&1; then
1656 # AIX install. It has an incompatible calling convention.
1657 # OSF/1 installbsd also uses dspmsg, but is usable.
1660 ac_cv_path_install
="$ac_dir/$ac_prog -c"
1671 if test "${ac_cv_path_install+set}" = set; then
1672 INSTALL
="$ac_cv_path_install"
1674 # As a last resort, use the slow shell script. We don't cache a
1675 # path for INSTALL within a source directory, because that will
1676 # break other packages using the cache if that directory is
1677 # removed, or if the path is relative.
1678 INSTALL
="$ac_install_sh"
1681 echo "$ac_t""$INSTALL" 1>&6
1683 # Use test -z because SunOS4 sh mishandles braces in ${var-val}.
1684 # It thinks the first close brace ends the variable substitution.
1685 test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM
='${INSTALL}'
1687 test -z "$INSTALL_DATA" && INSTALL_DATA
='${INSTALL} -m 644'
1690 echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
1691 echo "configure:1692: checking how to run the C preprocessor" >&5
1692 # On Suns, sometimes $CPP names a directory.
1693 if test -n "$CPP" && test -d "$CPP"; then
1696 if test -z "$CPP"; then
1697 if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
1698 echo $ac_n "(cached) $ac_c" 1>&6
1700 # This must be in double quotes, not single quotes, because CPP may get
1701 # substituted into the Makefile and "${CC-cc}" will confuse make.
1703 # On the NeXT, cc -E runs the code through the compiler's parser,
1704 # not just through cpp.
1705 cat > conftest.
$ac_ext <<EOF
1706 #line 1707 "configure"
1707 #include "confdefs.h"
1711 ac_try
="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
1712 { (eval echo configure
:1713: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
1713 ac_err
=`grep -v '^ *+' conftest.out`
1714 if test -z "$ac_err"; then
1718 echo "configure: failed program was:" >&5
1719 cat conftest.
$ac_ext >&5
1721 CPP
="${CC-cc} -E -traditional-cpp"
1722 cat > conftest.
$ac_ext <<EOF
1723 #line 1724 "configure"
1724 #include "confdefs.h"
1728 ac_try
="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
1729 { (eval echo configure
:1730: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
1730 ac_err
=`grep -v '^ *+' conftest.out`
1731 if test -z "$ac_err"; then
1735 echo "configure: failed program was:" >&5
1736 cat conftest.
$ac_ext >&5
1743 ac_cv_prog_CPP
="$CPP"
1745 CPP
="$ac_cv_prog_CPP"
1747 ac_cv_prog_CPP
="$CPP"
1749 echo "$ac_t""$CPP" 1>&6
1751 for ac_hdr
in string.h stdlib.h memory.h
strings.h unistd.h stdarg.h varargs.h errno.h sys
/types.h
1753 ac_safe
=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
1754 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
1755 echo "configure:1756: checking for $ac_hdr" >&5
1756 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
1757 echo $ac_n "(cached) $ac_c" 1>&6
1759 cat > conftest.
$ac_ext <<EOF
1760 #line 1761 "configure"
1761 #include "confdefs.h"
1764 ac_try
="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
1765 { (eval echo configure
:1766: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
1766 ac_err
=`grep -v '^ *+' conftest.out`
1767 if test -z "$ac_err"; then
1769 eval "ac_cv_header_$ac_safe=yes"
1772 echo "configure: failed program was:" >&5
1773 cat conftest.
$ac_ext >&5
1775 eval "ac_cv_header_$ac_safe=no"
1779 if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
1780 echo "$ac_t""yes" 1>&6
1781 ac_tr_hdr
=HAVE_
`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
1782 cat >> confdefs.h
<<EOF
1783 #define $ac_tr_hdr 1
1787 echo "$ac_t""no" 1>&6
1792 # Put this here so that autoconf's "cross-compiling" message doesn't confuse
1793 # people who are not cross-compiling but are compiling cross-assemblers.
1794 echo $ac_n "checking whether compiling a cross-assembler""... $ac_c" 1>&6
1795 echo "configure:1796: checking whether compiling a cross-assembler" >&5
1796 if test "${host}" = "${target}"; then
1800 cat >> confdefs.h
<<\EOF
1801 #define CROSS_COMPILE 1
1805 echo "$ac_t""$cross_gas" 1>&6
1807 # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
1808 # for constant arguments. Useless!
1809 echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
1810 echo "configure:1811: checking for working alloca.h" >&5
1811 if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
1812 echo $ac_n "(cached) $ac_c" 1>&6
1814 cat > conftest.
$ac_ext <<EOF
1815 #line 1816 "configure"
1816 #include "confdefs.h"
1819 char *p = alloca(2 * sizeof(int));
1822 if { (eval echo configure
:1823: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest
; then
1824 ac_cv_header_alloca_h
=yes
1826 echo "configure: failed program was:" >&5
1827 cat conftest.
$ac_ext >&5
1829 ac_cv_header_alloca_h
=no
1834 echo "$ac_t""$ac_cv_header_alloca_h" 1>&6
1835 if test $ac_cv_header_alloca_h = yes; then
1836 cat >> confdefs.h
<<\EOF
1837 #define HAVE_ALLOCA_H 1
1842 echo $ac_n "checking for alloca""... $ac_c" 1>&6
1843 echo "configure:1844: checking for alloca" >&5
1844 if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
1845 echo $ac_n "(cached) $ac_c" 1>&6
1847 cat > conftest.
$ac_ext <<EOF
1848 #line 1849 "configure"
1849 #include "confdefs.h"
1852 # define alloca __builtin_alloca
1855 # include <alloca.h>
1860 # ifndef alloca /* predefined by HP cc +Olibcalls */
1868 char *p = (char *) alloca(1);
1871 if { (eval echo configure
:1872: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest
; then
1873 ac_cv_func_alloca_works
=yes
1875 echo "configure: failed program was:" >&5
1876 cat conftest.
$ac_ext >&5
1878 ac_cv_func_alloca_works
=no
1883 echo "$ac_t""$ac_cv_func_alloca_works" 1>&6
1884 if test $ac_cv_func_alloca_works = yes; then
1885 cat >> confdefs.h
<<\EOF
1886 #define HAVE_ALLOCA 1
1891 if test $ac_cv_func_alloca_works = no
; then
1892 # The SVR3 libPW and SVR4 libucb both contain incompatible functions
1893 # that cause trouble. Some versions do not even contain alloca or
1894 # contain a buggy version. If you still want to use their alloca,
1895 # use ar to extract alloca.o from them instead of compiling alloca.c.
1897 cat >> confdefs.h
<<\EOF
1902 echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
1903 echo "configure:1904: checking whether alloca needs Cray hooks" >&5
1904 if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
1905 echo $ac_n "(cached) $ac_c" 1>&6
1907 cat > conftest.
$ac_ext <<EOF
1908 #line 1909 "configure"
1909 #include "confdefs.h"
1910 #if defined(CRAY) && ! defined(CRAY2)
1917 if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
1918 egrep "webecray" >/dev
/null
2>&1; then
1929 echo "$ac_t""$ac_cv_os_cray" 1>&6
1930 if test $ac_cv_os_cray = yes; then
1931 for ac_func
in _getb67 GETB67 getb67
; do
1932 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
1933 echo "configure:1934: checking for $ac_func" >&5
1934 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
1935 echo $ac_n "(cached) $ac_c" 1>&6
1937 cat > conftest.
$ac_ext <<EOF
1938 #line 1939 "configure"
1939 #include "confdefs.h"
1940 /* System header to define __stub macros and hopefully few prototypes,
1941 which can conflict with char $ac_func(); below. */
1943 /* Override any gcc2 internal prototype to avoid an error. */
1944 /* We use char because int might match the return type of a gcc2
1945 builtin and then its argument prototype would still apply. */
1950 /* The GNU C library defines this for functions which it implements
1951 to always fail with ENOSYS. Some functions are actually named
1952 something starting with __ and the normal name is an alias. */
1953 #if defined (__stub_$ac_func) || defined (__stub___$ac_func)
1961 if { (eval echo configure
:1962: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest
; then
1963 eval "ac_cv_func_$ac_func=yes"
1965 echo "configure: failed program was:" >&5
1966 cat conftest.
$ac_ext >&5
1968 eval "ac_cv_func_$ac_func=no"
1973 if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
1974 echo "$ac_t""yes" 1>&6
1975 cat >> confdefs.h
<<EOF
1976 #define CRAY_STACKSEG_END $ac_func
1981 echo "$ac_t""no" 1>&6
1987 echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
1988 echo "configure:1989: checking stack direction for C alloca" >&5
1989 if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
1990 echo $ac_n "(cached) $ac_c" 1>&6
1992 if test "$cross_compiling" = yes; then
1993 ac_cv_c_stack_direction
=0
1995 cat > conftest.
$ac_ext <<EOF
1996 #line 1997 "configure"
1997 #include "confdefs.h"
1998 find_stack_direction ()
2000 static char *addr = 0;
2005 return find_stack_direction ();
2008 return (&dummy > addr) ? 1 : -1;
2012 exit (find_stack_direction() < 0);
2015 if { (eval echo configure
:2016: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest
&& (.
/conftest
; exit) 2>/dev
/null
2017 ac_cv_c_stack_direction
=1
2019 echo "configure: failed program was:" >&5
2020 cat conftest.
$ac_ext >&5
2022 ac_cv_c_stack_direction
=-1
2029 echo "$ac_t""$ac_cv_c_stack_direction" 1>&6
2030 cat >> confdefs.h
<<EOF
2031 #define STACK_DIRECTION $ac_cv_c_stack_direction
2036 echo $ac_n "checking for inline""... $ac_c" 1>&6
2037 echo "configure:2038: checking for inline" >&5
2038 if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
2039 echo $ac_n "(cached) $ac_c" 1>&6
2042 for ac_kw
in inline __inline__ __inline
; do
2043 cat > conftest.
$ac_ext <<EOF
2044 #line 2045 "configure"
2045 #include "confdefs.h"
2051 if { (eval echo configure
:2052: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
2053 ac_cv_c_inline
=$ac_kw; break
2055 echo "configure: failed program was:" >&5
2056 cat conftest.
$ac_ext >&5
2063 echo "$ac_t""$ac_cv_c_inline" 1>&6
2064 case "$ac_cv_c_inline" in
2066 no
) cat >> confdefs.h
<<\EOF
2070 *) cat >> confdefs.h
<<EOF
2071 #define inline $ac_cv_c_inline
2077 # VMS doesn't have unlink.
2078 for ac_func
in unlink remove
2080 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
2081 echo "configure:2082: checking for $ac_func" >&5
2082 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
2083 echo $ac_n "(cached) $ac_c" 1>&6
2085 cat > conftest.
$ac_ext <<EOF
2086 #line 2087 "configure"
2087 #include "confdefs.h"
2088 /* System header to define __stub macros and hopefully few prototypes,
2089 which can conflict with char $ac_func(); below. */
2091 /* Override any gcc2 internal prototype to avoid an error. */
2092 /* We use char because int might match the return type of a gcc2
2093 builtin and then its argument prototype would still apply. */
2098 /* The GNU C library defines this for functions which it implements
2099 to always fail with ENOSYS. Some functions are actually named
2100 something starting with __ and the normal name is an alias. */
2101 #if defined (__stub_$ac_func) || defined (__stub___$ac_func)
2109 if { (eval echo configure
:2110: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest
; then
2111 eval "ac_cv_func_$ac_func=yes"
2113 echo "configure: failed program was:" >&5
2114 cat conftest.
$ac_ext >&5
2116 eval "ac_cv_func_$ac_func=no"
2121 if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
2122 echo "$ac_t""yes" 1>&6
2123 ac_tr_func
=HAVE_
`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
2124 cat >> confdefs.h
<<EOF
2125 #define $ac_tr_func 1
2129 echo "$ac_t""no" 1>&6
2134 # Some systems don't have sbrk().
2137 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
2138 echo "configure:2139: checking for $ac_func" >&5
2139 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
2140 echo $ac_n "(cached) $ac_c" 1>&6
2142 cat > conftest.
$ac_ext <<EOF
2143 #line 2144 "configure"
2144 #include "confdefs.h"
2145 /* System header to define __stub macros and hopefully few prototypes,
2146 which can conflict with char $ac_func(); below. */
2148 /* Override any gcc2 internal prototype to avoid an error. */
2149 /* We use char because int might match the return type of a gcc2
2150 builtin and then its argument prototype would still apply. */
2155 /* The GNU C library defines this for functions which it implements
2156 to always fail with ENOSYS. Some functions are actually named
2157 something starting with __ and the normal name is an alias. */
2158 #if defined (__stub_$ac_func) || defined (__stub___$ac_func)
2166 if { (eval echo configure
:2167: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest
; then
2168 eval "ac_cv_func_$ac_func=yes"
2170 echo "configure: failed program was:" >&5
2171 cat conftest.
$ac_ext >&5
2173 eval "ac_cv_func_$ac_func=no"
2178 if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
2179 echo "$ac_t""yes" 1>&6
2180 ac_tr_func
=HAVE_
`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
2181 cat >> confdefs.h
<<EOF
2182 #define $ac_tr_func 1
2186 echo "$ac_t""no" 1>&6
2191 # Some non-ANSI preprocessors botch requoting inside strings. That's bad
2192 # enough, but on some of those systems, the assert macro relies on requoting
2194 echo $ac_n "checking for working assert macro""... $ac_c" 1>&6
2195 echo "configure:2196: checking for working assert macro" >&5
2196 if eval "test \"`echo '$''{'gas_cv_assert_ok'+set}'`\" = set"; then
2197 echo $ac_n "(cached) $ac_c" 1>&6
2199 cat > conftest.
$ac_ext <<EOF
2200 #line 2201 "configure"
2201 #include "confdefs.h"
2206 /* check for requoting problems */
2207 static int a, b, c, d;
2209 assert (!strcmp(s, "foo bar baz quux"));
2210 /* check for newline handling */
2216 if { (eval echo configure
:2217: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest
; then
2218 gas_cv_assert_ok
=yes
2220 echo "configure: failed program was:" >&5
2221 cat conftest.
$ac_ext >&5
2227 echo "$ac_t""$gas_cv_assert_ok" 1>&6
2228 test $gas_cv_assert_ok = yes ||
cat >> confdefs.h
<<\EOF
2229 #define BROKEN_ASSERT 1
2234 # On some systems, the system header files may not declare malloc, realloc,
2235 # and free. There are places where gas needs these functions to have been
2236 # declared -- such as when taking their addresses.
2238 #ifdef HAVE_MEMORY_H
2241 #ifdef HAVE_STRING_H
2244 #ifdef HAVE_STRINGS_H
2245 #include <strings.h>
2248 #ifdef HAVE_STDLIB_H
2251 #ifdef HAVE_UNISTD_H
2256 echo $ac_n "checking whether declaration is required for strstr""... $ac_c" 1>&6
2257 echo "configure:2258: checking whether declaration is required for strstr" >&5
2258 if eval "test \"`echo '$''{'gas_cv_decl_needed_strstr'+set}'`\" = set"; then
2259 echo $ac_n "(cached) $ac_c" 1>&6
2261 cat > conftest.
$ac_ext <<EOF
2262 #line 2263 "configure"
2263 #include "confdefs.h"
2267 typedef char *(*f)();
2273 if { (eval echo configure
:2274: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest
; then
2275 gas_cv_decl_needed_strstr
=no
2277 echo "configure: failed program was:" >&5
2278 cat conftest.
$ac_ext >&5
2280 gas_cv_decl_needed_strstr
=yes
2284 echo "$ac_t""$gas_cv_decl_needed_strstr" 1>&6
2285 test $gas_cv_decl_needed_strstr = no ||
{
2286 cat >> confdefs.h
<<\EOF
2287 #define NEED_DECLARATION_STRSTR 1
2293 echo $ac_n "checking whether declaration is required for malloc""... $ac_c" 1>&6
2294 echo "configure:2295: checking whether declaration is required for malloc" >&5
2295 if eval "test \"`echo '$''{'gas_cv_decl_needed_malloc'+set}'`\" = set"; then
2296 echo $ac_n "(cached) $ac_c" 1>&6
2298 cat > conftest.
$ac_ext <<EOF
2299 #line 2300 "configure"
2300 #include "confdefs.h"
2304 typedef char *(*f)();
2310 if { (eval echo configure
:2311: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest
; then
2312 gas_cv_decl_needed_malloc
=no
2314 echo "configure: failed program was:" >&5
2315 cat conftest.
$ac_ext >&5
2317 gas_cv_decl_needed_malloc
=yes
2321 echo "$ac_t""$gas_cv_decl_needed_malloc" 1>&6
2322 test $gas_cv_decl_needed_malloc = no ||
{
2323 cat >> confdefs.h
<<\EOF
2324 #define NEED_DECLARATION_MALLOC 1
2330 echo $ac_n "checking whether declaration is required for free""... $ac_c" 1>&6
2331 echo "configure:2332: checking whether declaration is required for free" >&5
2332 if eval "test \"`echo '$''{'gas_cv_decl_needed_free'+set}'`\" = set"; then
2333 echo $ac_n "(cached) $ac_c" 1>&6
2335 cat > conftest.
$ac_ext <<EOF
2336 #line 2337 "configure"
2337 #include "confdefs.h"
2341 typedef void (*f)();
2347 if { (eval echo configure
:2348: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest
; then
2349 gas_cv_decl_needed_free
=no
2351 echo "configure: failed program was:" >&5
2352 cat conftest.
$ac_ext >&5
2354 gas_cv_decl_needed_free
=yes
2358 echo "$ac_t""$gas_cv_decl_needed_free" 1>&6
2359 test $gas_cv_decl_needed_free = no ||
{
2360 cat >> confdefs.h
<<\EOF
2361 #define NEED_DECLARATION_FREE 1
2367 echo $ac_n "checking whether declaration is required for sbrk""... $ac_c" 1>&6
2368 echo "configure:2369: checking whether declaration is required for sbrk" >&5
2369 if eval "test \"`echo '$''{'gas_cv_decl_needed_sbrk'+set}'`\" = set"; then
2370 echo $ac_n "(cached) $ac_c" 1>&6
2372 cat > conftest.
$ac_ext <<EOF
2373 #line 2374 "configure"
2374 #include "confdefs.h"
2378 typedef char *(*f)();
2384 if { (eval echo configure
:2385: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest
; then
2386 gas_cv_decl_needed_sbrk
=no
2388 echo "configure: failed program was:" >&5
2389 cat conftest.
$ac_ext >&5
2391 gas_cv_decl_needed_sbrk
=yes
2395 echo "$ac_t""$gas_cv_decl_needed_sbrk" 1>&6
2396 test $gas_cv_decl_needed_sbrk = no ||
{
2397 cat >> confdefs.h
<<\EOF
2398 #define NEED_DECLARATION_SBRK 1
2404 # Does errno.h declare errno, or do we have to add a separate declaration
2407 echo $ac_n "checking whether declaration is required for errno""... $ac_c" 1>&6
2408 echo "configure:2409: checking whether declaration is required for errno" >&5
2409 if eval "test \"`echo '$''{'gas_cv_decl_needed_errno'+set}'`\" = set"; then
2410 echo $ac_n "(cached) $ac_c" 1>&6
2412 cat > conftest.
$ac_ext <<EOF
2413 #line 2414 "configure"
2414 #include "confdefs.h"
2428 if { (eval echo configure
:2429: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest
; then
2430 gas_cv_decl_needed_errno
=no
2432 echo "configure: failed program was:" >&5
2433 cat conftest.
$ac_ext >&5
2435 gas_cv_decl_needed_errno
=yes
2439 echo "$ac_t""$gas_cv_decl_needed_errno" 1>&6
2440 test $gas_cv_decl_needed_errno = no ||
{
2441 cat >> confdefs.h
<<\EOF
2442 #define NEED_DECLARATION_ERRNO 1
2450 RPATH_ENVVAR
=LD_LIBRARY_PATH
2451 # If we have shared libraries, try to set rpath reasonably.
2452 if test "${shared}" = "true"; then
2455 HLDFLAGS
='-Wl,+s,+b,$(libdir)'
2456 RPATH_ENVVAR
=SHLIB_PATH
2458 *-*-irix5* |
*-*-irix6*)
2459 HLDFLAGS
='-Wl,-rpath,$(libdir)'
2464 HLDFLAGS
='-Wl,-rpath,$(libdir)'
2467 HLDFLAGS
='-R $(libdir)'
2470 HLDENV
='if test -z "$${LD_RUN_PATH}"; then LD_RUN_PATH=$(libdir); else LD_RUN_PATH=$${LD_RUN_PATH}:$(libdir); fi; export LD_RUN_PATH;'
2475 # On SunOS, if the linker supports the -rpath option, use it to
2476 # prevent ../bfd and ../opcodes from being included in the run time
2480 echo 'main () { }' > conftest.c
2481 ${CC} -o conftest
-Wl,-rpath= conftest.c
>/dev
/null
2>conftest.t
2482 if grep 'unrecognized' conftest.t
>/dev
/null
2>&1; then
2484 elif grep 'No such file' conftest.t
>/dev
/null
2>&1; then
2486 elif grep 'do not mix' conftest.t
>/dev
/null
2>&1; then
2488 elif test "${shared}" = "true"; then
2489 HLDFLAGS
='-Wl,-rpath=$(libdir)'
2491 HLDFLAGS
='-Wl,-rpath='
2493 rm -f conftest.t conftest.c conftest
2503 cat > confcache
<<\EOF
2504 # This file is a shell script that caches the results of configure
2505 # tests run on this system so they can be shared between configure
2506 # scripts and configure runs. It is not useful on other systems.
2507 # If it contains results you don't want to keep, you may remove or edit it.
2509 # By default, configure uses ./config.cache as the cache file,
2510 # creating it if it does not exist already. You can give configure
2511 # the --cache-file=FILE option to use a different cache file; that is
2512 # what configure does when it calls configure scripts in
2513 # subdirectories, so they share the cache.
2514 # Giving --cache-file=/dev/null disables caching, for debugging configure.
2515 # config.status only pays attention to the cache file if you give it the
2516 # --recheck option to rerun configure.
2519 # The following way of writing the cache mishandles newlines in values,
2520 # but we know of no workaround that is simple, portable, and efficient.
2521 # So, don't put newlines in cache variables' values.
2522 # Ultrix sh set writes to stderr and can't be redirected directly,
2523 # and sets the high bit in the cache file unless we assign to the vars.
2525 case `(ac_space=' '; set) 2>&1` in
2527 # `set' does not quote correctly, so add quotes (double-quote substitution
2528 # turns \\\\ into \\, and sed turns \\ into \).
2530 -e "s/'/'\\\\''/g" \
2531 -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
2534 # `set' quotes correctly as required by POSIX, so do not add quotes.
2535 sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
2538 if cmp -s $cache_file confcache
; then
2541 if test -w $cache_file; then
2542 echo "updating cache $cache_file"
2543 cat confcache
> $cache_file
2545 echo "not updating unwritable cache $cache_file"
2550 trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
2552 test "x$prefix" = xNONE
&& prefix
=$ac_default_prefix
2553 # Let make expand exec_prefix.
2554 test "x$exec_prefix" = xNONE
&& exec_prefix
='${prefix}'
2556 # Any assignment to VPATH causes Sun make to only execute
2557 # the first set of double-colon rules, so remove it if not needed.
2558 # If there is a colon in the path, we need to keep it.
2559 if test "x$srcdir" = x.
; then
2560 ac_vpsub
='/^[ ]*VPATH[ ]*=[^:]*$/d'
2563 trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
2565 DEFS
=-DHAVE_CONFIG_H
2567 # Without the "./", some shells look in PATH for config.status.
2568 : ${CONFIG_STATUS=./config.status}
2570 echo creating
$CONFIG_STATUS
2571 rm -f $CONFIG_STATUS
2572 cat > $CONFIG_STATUS <<EOF
2574 # Generated automatically by configure.
2575 # Run this file to recreate the current configuration.
2576 # This directory was configured as follows,
2577 # on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
2579 # $0 $ac_configure_args
2581 # Compiler output produced by configure, useful for debugging
2582 # configure, is in ./config.log if it exists.
2584 ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
2587 case "\$ac_option" in
2588 -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
2589 echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
2590 exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
2591 -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
2592 echo "$CONFIG_STATUS generated by autoconf version 2.12"
2594 -help | --help | --hel | --he | --h)
2595 echo "\$ac_cs_usage"; exit 0 ;;
2596 *) echo "\$ac_cs_usage"; exit 1 ;;
2600 ac_given_srcdir=$srcdir
2601 ac_given_INSTALL="$INSTALL"
2603 trap 'rm -fr `echo "Makefile doc/Makefile .gdbinit:gdbinit.in conf" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
2605 cat >> $CONFIG_STATUS <<EOF
2607 # Protect against being on the right side of a sed subst in config.status.
2608 sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
2609 s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
2612 s%@CFLAGS@%$CFLAGS%g
2613 s%@CPPFLAGS@%$CPPFLAGS%g
2614 s%@CXXFLAGS@%$CXXFLAGS%g
2616 s%@LDFLAGS@%$LDFLAGS%g
2618 s%@exec_prefix@%$exec_prefix%g
2619 s%@prefix@%$prefix%g
2620 s%@program_transform_name@%$program_transform_name%g
2621 s%@bindir@%$bindir%g
2622 s%@sbindir@%$sbindir%g
2623 s%@libexecdir@%$libexecdir%g
2624 s%@datadir@%$datadir%g
2625 s%@sysconfdir@%$sysconfdir%g
2626 s%@sharedstatedir@%$sharedstatedir%g
2627 s%@localstatedir@%$localstatedir%g
2628 s%@libdir@%$libdir%g
2629 s%@includedir@%$includedir%g
2630 s%@oldincludedir@%$oldincludedir%g
2631 s%@infodir@%$infodir%g
2632 s%@mandir@%$mandir%g
2634 s%@host_alias@%$host_alias%g
2635 s%@host_cpu@%$host_cpu%g
2636 s%@host_vendor@%$host_vendor%g
2637 s%@host_os@%$host_os%g
2638 s%@target@%$target%g
2639 s%@target_alias@%$target_alias%g
2640 s%@target_cpu@%$target_cpu%g
2641 s%@target_vendor@%$target_vendor%g
2642 s%@target_os@%$target_os%g
2644 s%@build_alias@%$build_alias%g
2645 s%@build_cpu@%$build_cpu%g
2646 s%@build_vendor@%$build_vendor%g
2647 s%@build_os@%$build_os%g
2648 /@target_frag@/r $target_frag
2650 s%@extra_objects@%$extra_objects%g
2651 s%@target_cpu_type@%$target_cpu_type%g
2652 s%@obj_format@%$obj_format%g
2653 s%@te_file@%$te_file%g
2655 s%@BFDDEP@%$BFDDEP%g
2656 s%@BFDLIB@%$BFDLIB%g
2657 s%@OPCODES_DEP@%$OPCODES_DEP%g
2658 s%@OPCODES_LIB@%$OPCODES_LIB%g
2659 s%@ALL_OBJ_DEPS@%$ALL_OBJ_DEPS%g
2661 s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
2662 s%@INSTALL_DATA@%$INSTALL_DATA%g
2664 s%@ALLOCA@%$ALLOCA%g
2665 s%@HLDFLAGS@%$HLDFLAGS%g
2666 s%@HLDENV@%$HLDENV%g
2667 s%@RPATH_ENVVAR@%$RPATH_ENVVAR%g
2672 cat >> $CONFIG_STATUS <<\EOF
2674 # Split the substitutions into bite-sized pieces for seds with
2675 # small command number limits, like on Digital OSF/1 and HP-UX.
2676 ac_max_sed_cmds
=90 # Maximum number of lines to put in a sed script.
2677 ac_file
=1 # Number of current file.
2678 ac_beg
=1 # First line for current file.
2679 ac_end
=$ac_max_sed_cmds # Line after last line for current file.
2682 while $ac_more_lines; do
2683 if test $ac_beg -gt 1; then
2684 sed "1,${ac_beg}d; ${ac_end}q" conftest.subs
> conftest.s
$ac_file
2686 sed "${ac_end}q" conftest.subs
> conftest.s
$ac_file
2688 if test ! -s conftest.s
$ac_file; then
2690 rm -f conftest.s
$ac_file
2692 if test -z "$ac_sed_cmds"; then
2693 ac_sed_cmds
="sed -f conftest.s$ac_file"
2695 ac_sed_cmds
="$ac_sed_cmds | sed -f conftest.s$ac_file"
2697 ac_file
=`expr $ac_file + 1`
2699 ac_end
=`expr $ac_end + $ac_max_sed_cmds`
2702 if test -z "$ac_sed_cmds"; then
2707 cat >> $CONFIG_STATUS <<EOF
2709 CONFIG_FILES=\${CONFIG_FILES-"Makefile doc/Makefile .gdbinit:gdbinit.in"}
2711 cat >> $CONFIG_STATUS <<\EOF
2712 for ac_file
in ..
$CONFIG_FILES; do if test "x$ac_file" != x..
; then
2713 # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
2715 *:*) ac_file_in
=`echo "$ac_file"|sed 's%[^:]*:%%'`
2716 ac_file
=`echo "$ac_file"|sed 's%:.*%%'` ;;
2717 *) ac_file_in
="${ac_file}.in" ;;
2720 # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
2722 # Remove last slash and all that follows it. Not all systems have dirname.
2723 ac_dir
=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
2724 if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .
; then
2725 # The file is in a subdirectory.
2726 test ! -d "$ac_dir" && mkdir
"$ac_dir"
2727 ac_dir_suffix
="/`echo $ac_dir|sed 's%^\./%%'`"
2728 # A "../" for each directory in $ac_dir_suffix.
2729 ac_dots
=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
2731 ac_dir_suffix
= ac_dots
=
2734 case "$ac_given_srcdir" in
2736 if test -z "$ac_dots"; then top_srcdir
=.
2737 else top_srcdir
=`echo $ac_dots|sed 's%/$%%'`; fi ;;
2738 /*) srcdir
="$ac_given_srcdir$ac_dir_suffix"; top_srcdir
="$ac_given_srcdir" ;;
2740 srcdir
="$ac_dots$ac_given_srcdir$ac_dir_suffix"
2741 top_srcdir
="$ac_dots$ac_given_srcdir" ;;
2744 case "$ac_given_INSTALL" in
2745 [/$
]*) INSTALL
="$ac_given_INSTALL" ;;
2746 *) INSTALL
="$ac_dots$ac_given_INSTALL" ;;
2749 echo creating
"$ac_file"
2751 configure_input
="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
2753 *Makefile
*) ac_comsub
="1i\\
2754 # $configure_input" ;;
2758 ac_file_inputs
=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
2760 s%@configure_input@%$configure_input%g
2761 s%@srcdir@%$srcdir%g
2762 s%@top_srcdir@%$top_srcdir%g
2763 s%@INSTALL@%$INSTALL%g
2764 " $ac_file_inputs |
(eval "$ac_sed_cmds") > $ac_file
2768 # These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
2769 # NAME is the cpp macro being defined and VALUE is the value it is being given.
2771 # ac_d sets the value in "#define NAME VALUE" lines.
2772 ac_dA
='s%^\([ ]*\)#\([ ]*define[ ][ ]*\)'
2773 ac_dB
='\([ ][ ]*\)[^ ]*%\1#\2'
2776 # ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE".
2777 ac_uA
='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
2778 ac_uB
='\([ ]\)%\1#\2define\3'
2781 # ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
2782 ac_eA
='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
2783 ac_eB
='$%\1#\2define\3'
2787 if test "${CONFIG_HEADERS+set}" != set; then
2789 cat >> $CONFIG_STATUS <<EOF
2790 CONFIG_HEADERS="conf"
2792 cat >> $CONFIG_STATUS <<\EOF
2794 for ac_file
in ..
$CONFIG_HEADERS; do if test "x$ac_file" != x..
; then
2795 # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
2797 *:*) ac_file_in
=`echo "$ac_file"|sed 's%[^:]*:%%'`
2798 ac_file
=`echo "$ac_file"|sed 's%:.*%%'` ;;
2799 *) ac_file_in
="${ac_file}.in" ;;
2802 echo creating
$ac_file
2804 rm -f conftest.frag conftest.
in conftest.out
2805 ac_file_inputs
=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
2806 cat $ac_file_inputs > conftest.
in
2810 # Transform confdefs.h into a sed script conftest.vals that substitutes
2811 # the proper values into config.h.in to produce config.h. And first:
2812 # Protect against being on the right side of a sed subst in config.status.
2813 # Protect against being in an unquoted here document in config.status.
2815 cat > conftest.hdr
<<\EOF
2818 s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp
2822 sed -n -f conftest.hdr confdefs.h > conftest.vals
2825 # This sed command replaces #undef with comments. This is necessary, for
2826 # example, in the case of _POSIX_SOURCE, which is predefined and required
2827 # on some systems where configure will not decide to define it.
2828 cat >> conftest.vals <<\EOF
2829 s%^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */%
2832 # Break up conftest.vals because some shells have a limit on
2833 # the size of here documents, and old seds have small limits too.
2838 ac_lines=`grep -c . conftest.vals
`
2839 # grep -c gives empty output for an empty file on some AIX systems.
2840 if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi
2841 # Write a limited-size here document to conftest.frag.
2842 echo ' cat > conftest.frag <<CEOF' >> $CONFIG_STATUS
2843 sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS
2845 sed -f conftest.frag conftest.in > conftest.out
2847 mv conftest.out conftest.in
2849 sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail
2851 mv conftest.tail conftest.vals
2855 cat >> $CONFIG_STATUS <<\EOF
2856 rm -f conftest.frag conftest.h
2857 echo "/* $ac_file. Generated automatically by configure. */" > conftest.h
2858 cat conftest.in >> conftest.h
2860 if cmp -s $ac_file conftest.h 2>/dev/null; then
2861 echo "$ac_file is unchanged"
2864 # Remove last slash and all that follows it. Not all systems have dirname.
2865 ac_dir=`echo $ac_file|
sed 's%/[^/][^/]*$%%'`
2866 if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
2867 # The file is in a subdirectory.
2868 test ! -d "$ac_dir" && mkdir "$ac_dir"
2871 mv conftest.h $ac_file
2876 cat >> $CONFIG_STATUS <<EOF
2877 target_cpu_type=${target_cpu_type}
2878 obj_format=${obj_format}
2881 cat >> $CONFIG_STATUS <<\EOF
2882 rm -f targ-cpu.c targ-cpu.h obj-format.h obj-format.c targ-env.h atof-targ.c itbl-cpu.h
2883 echo '#include "tc-'"${target_cpu_type}"'.h"' > targ-cpu.h
2884 echo '#include "obj-'"${obj_format}"'.h"' > obj-format.h
2885 echo '#include "te-'"${te_file}"'.h"' > targ-env.h
2886 echo '#include "itbl-'"${target_cpu_type}"'.h"' > itbl-cpu.h
2887 case ${target_cpu_type} in
2888 m32r) echo '#include "opcodes/'"${target_cpu_type}"'-opc.h"' > cgen-opc.h ;;
2892 chmod +x $CONFIG_STATUS
2893 rm -fr confdefs* $ac_clean_files
2894 test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1